,
.
.
.
,
.
!
.
.
.
•
,
, .
•
,
.
•
- ,
.
•
,
.
40° C
.
• .
•
,
. , ,
,
.
• ,
,
10 ,
.
• .
3.
.
1 .
:
( 5°C)
( 40°C) .
4.
•
.
.
• -
.
.
.
1 .
•
.
(ON)
(OFF)
• ,
/ (1)
(2).
• ,
.
:
, .
.
•
, .
.
,
.
•
. ,
.
•
.
Ferm 61
• Do not leave the power tool unattended and always
remove the battery from the appliance after use.
• Store in a dry place well out of reach of children.
• Always use safety glasses and a dust mask when
cutting or drilling through materials. We also
recommend the use of ear protectors and gloves.
• Wear the right clothes - not loose fitting or jewellery
and ensure garments cannot come into contact with
moving parts.
• Wear non-slip shoes, especially when working
outdoors. Do not wear sandals or open-toed shoes.
• If you have long hair, tie it back safely to avoid tangling
it in moving parts.
• Before using any power tool, check first for damaged
parts and if found do not use them before the part or
parts have been replaced with new ones.
• Do not use power tools when you are tired or have
been drinking alcohol.
• Ensure the power switch is in the OFF position
before inserting the battery.
• Never carry the tool / charger by the cord or yank it
to disconnect it from the socket. Keep the cord away
from heat, oil and sharp edges.
• Keep the cutting tools sharp (regular maintenance,
replacement, sharpening) and clean for better
performance.
• Do not force the appliance - let it work at the rate for
which it was intended.
• Do not overreach while working - you may lose your
balance.
• You must switch off your tool at the tool's on/off
switch.
• Never change a blade or any other attachment
without first removing the battery from the
appliance.
• Always fit the blade cover when the tool is in transit
or in storage.
• Only use spare parts and attachments supplied by
Ferm. Use of attachments other than those supplied
or recommended by Ferm will invalidate your
guarantee and could be dangerous.
• Only use this appliance for its intended purpose -
trimming hedges and bushes
ABOVE ALL - BE CAREFUL!
Specific Safety Warnings!
• Always ensure all handles and guards are fitted when
using the tool.
• Never attempt to use an incomplete machine or one
fitted with an unauthorised modification.
• Before cleaning the hedge trimmer remove
disconnect the battery from the machine.
• Check cutting blades regularly for damage, and if
damaged repair immediately.
• Never allow children to use the tool
• After use the tool should be stored so that the blade
is not exposed (always use the transport protection)
Addition Safety Warning for the battery charger
• The charger is specifically designed for use from a
standard domestic electricity supply 230 -240 volts.
Do not attempt to connect it to any other power
supply.
• Please read and follow the instructions printed on the
charger and battery
• The battery must be charged indoors only - in a clean
dry place.
• Use the charger only for the battery type which is
included.
WARNING!
If the battery is cracked or damaged or has received a
heavy knock you must not insert it into the charger.
There is a risk of electric shock or electrocution. The
battery must be replaced and the damaged battery
disposed of safely.
Ensure the charger and the charger lead is not
placed where it can be tripped over or stepped
upon.
WARNING !
Do not allow liquid of any kind to come into contact with
the charger. There is a risk of electric shock. The battery
must be completely dry before being inserted into the
charger.
• Allow the battery to cool down after use by leaving it
in a safe, cool well-ventilated place out of reach of
children.
• Do not attempt to charge the battery with any other
charger than the one suppliedwith this product.
• Do not attempt to dismantle the charger - if it is not
working take it to your nearest authorised service
centre for repair.
• Always store the charger, battery and appliance in a
safe, dry place where the temperature cannot
exceed 40 C (104F) e.g. in the open exposed to
direct sunlight under glass or alongside metal
fabrications.
• Keep out of reach of children.
• If the battery leaks very slightly this may not indicate
4 Ferm