Panasonic cq-c8803 de handleiding

Merk: Panasonic

Model: cq-c8803

Categorie: Auto media-ontvangers

Type: de handleiding

Deze handleiding is ook geschikt voor

CQC8803N

WMA MP3 CD Player/Receiver

Model: CQ-C8803N

Operating Instructions

Bedienungsanleitung

Manuel d

’instructions

instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

Brugsvejledning

àÌÒÚÛÍˆËﬂ

ÔÓ

˝ÍÒÔÎÛ‡Ú‡ˆËË

Operating Instructions

Bedienungsanleitung

Manuel d’instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

Brugsvejledning

àÌÒÚÛÍˆËﬂ ÔÓ ˝ÍÒÔÎÛ‡Ú‡ˆËË

CQ-C8803N

D M

DISP

PTY

TEXT

¡Please read these instructions carefully before using this product and keep this manual for future reference.

¡Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren Sie sie danach

für spätere Nachschlagzwecke sorgfältig auf.

¡Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.

Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.

¡Läs igenom denna bruksanvisning noga innan produkten tas i bruk. Spara bruksanvisningen för framtida behov.

Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri.

¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro.

¡Læs venligst denne brugsvejledning grundigt, inden dette produkt tages i brug og gem den til senere konsultation.

¡èÂÂ‰ Ì‡˜‡ÎÓÏ ˝ÍÒÔÎÛ‡Ú‡ˆËË ÔÓÒËÏ ÔÓ˜ËÚ‡Ú¸ Ì‡ÒÚÓﬂ˘Û˛ ËÌÒÚÛÍˆË˛ ‚ÌËÏ‡ÚÂÎ¸ÌÓ Ë ı‡ÌËÚ¸ ÂÂ Ì‡ ÔÓÎ¸ÁÓ‚‡ÌËÂ Ì‡ ·Û‰Û˘ÂÂ.

Safety Information

CQ-C8803N

Warning

Observe the following warnings when using

this unit.

❑

The driver should neither watch the display nor

operate the system while driving.

Watching the display or operating the system will distract

the driver from looking ahead of the vehicle and can cause

accidents. Always stop the vehicle in a safe location and use

the parking brake before watching the display or operating

the system.

❑

Use the proper power supply.

This product is designed for operation with a negative

grounded 12 V DC battery system. Never operate this prod-

uct with other battery systems, especially a 24 V DC battery

system.

❑

Keep batteries and insulation film out of reach of

infants.

Batteries and insulation film can be ingested, so keep them

out of the reach of infants. If an infant ingests a battery or

insulation film, please seek immediate medical attention.

❑

Protect the Deck Mechanism.

Do not insert any foreign objects into the slot of this unit.

❑

Do not disassemble or modify the unit.

Do not disassemble, modify the unit or attempt to repair the

product yourself. If the product needs to be repaired, consult

your dealer or an authorized Panasonic Service Centre.

❑

Do not use the unit when it is out of order.

If the unit is out of order (no power, no sound) or in an

abnormal state (has foreign objects in it, is exposed to

water, is smoking, or smells), turn it off immediately and

consult your dealer.

❑

The remote control unit should not lie about in the

car.

If the remote control unit lies about, it could fall on the floor

while driving, get wedged under the brake pedal, and lead to

a traffic accident.

❑

Refer fuse replacement to qualified service person-

nel.

When the fuse blows out, eliminate the cause and have it

replaced with the fuse prescribed for this unit by a qualified

service engineer. Incorrect replacement of the fuse may lead

to smoke, fire, and damage to the product.

Observe the following warnings when

installing.

❑

Disconnect the lead from the negative (–) battery

terminal before installation.

Wiring and installation with the negative (–) battery terminal

connected may cause electrical shock and injury due to a

short circuit.

Some cars equipped with the electrical safety system have

specific procedures of battery terminal disconnection.

FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE

UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY

SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND

PERSONAL INJURY OR DEATH.

❑

Never use safety-related components for installa-

tion, grounding, and other such functions.

Do not use safety-related vehicle components (fuel tank,

brake, suspension, steering wheel, pedals, airbag, etc.) for

wiring or fixing the product or its accessories.

❑

Installing the product on the air bag cover or in a

location where it interferes with airbag operation is

prohibited.

❑

Check for piping, gasoline tank, electric wiring, and

other items before installing the product.

If you need to open a hole in the vehicle chassis to attach or

wire the product, first check where the wire harness, gaso-

line tank, and electric wiring are located. Then open the hole

from outside if possible.

❑

Never install the product in a location where it inter-

feres with your field of vision.

❑

Never have the power cord branched to supply other

equipment with power.

❑

After installation and wiring, you should check the

normal operation of other electrical equipment.

The continuation of their using in abnormal conditions may

cause fire, electrical shock or a traffic accident.

❑

In the case of installation to an airbag-equipping

car, confirm warnings and cautions of the vehicle

manufacturer before installation.

❑

Make sure the leads do not interfere with driving or

getting in and out of the vehicle.

❑

Insulate all exposed wires to prevent short circuit-

ing.

This pictograph intends to alert you to the pres-

ence of important operating instructions and

installation instructions. Failure to heed the

instructions may result in severe injury or death.

■

Read the operating instructions for the unit and all other com-

ponents of your car audio system carefully before using the

system. They contain instructions about how to use the sys-

tem in a safe and effective manner. Panasonic assumes no

responsibility for any problems resulting from failure to

observe the instructions given in this manual.

■

This manual uses pictographs to show you how to use the

product safely and to alert you to potential dangers resulting

from improper connections and operations. The meanings of

the pictographs are explained below. It is important that you

fully understand the meanings of the pictographs in order to

use this manual and the system properly.

Warning

This pictograph intends to alert you to the pres-

ence of important operating instructions and

installation instructions. Failure to heed the

instructions may result in injury or material dam-

age.

Caution

English

Safety Information

CQ-C8803N

Caution

Observe the following cautions when using this

unit.

❑

Keep the sound volume at an appropriate level.

Keep the volume level low enough to be aware of road and

traffic conditions while driving.

❑

Do not insert or allow your hand or fingers to be

caught in the unit.

To prevent injury, do not get your hand or fingers caught in

moving parts or in the disc slot. Especially watch out for

infants.

❑

This unit is designed for use exclusively in automo-

biles.

❑

Do not operate the unit for a prolonged period with

the engine turned off.

Operating the audio system for a long period of time with the

engine turned off will drain the battery.

❑

Do not expose the unit to direct sunlight or exces-

sive heat.

Otherwise these will raise the interior temperature of the

unit, and it may lead to smoke, fire, or other damage to the

unit.

❑

Do not use the product where it is exposed to water,

moisture, or dust.

Exposure of the unit to water, moisture, or dust may lead to

smoke, fire, or other damage to the unit. Make especially

sure that the unit does not get wet in car washes or on rainy

days.

Observe the following cautions when

installing.

❑

Refer wiring and installation to qualified service

personnel.

Installation of this unit requires special skills and experience.

For maximum safety, have it installed by your dealer.

Panasonic is not liable for any problems resulting from your

own installation of the unit.

❑

Follow the instructions to install and wire the prod-

uct.

Not following the instructions to properly install and wire the

product could cause an accident or fire.

❑

Take care not to damage the leads.

When wiring, take care not to damage the leads. Prevent

them from getting caught in the vehicle chassis, screws, and

moving parts such as seat rails. Do not scratch, pull, bend or

twist the leads. Do not run them near heat sources or place

heavy objects on them. If leads must be run over sharp

metal edges, protect the leads by winding them with vinyl

tape or similar protection.

❑

Use the designated parts and tools for installation.

Use the supplied or designated parts and appropriate tools

to install the product. The use of parts other than those sup-

plied or designated may result in internal damage to the unit.

Faulty installation may lead to an accident, a malfunction or

fire.

❑

Do not block the air vent or the cooling plate of the

unit.

Blocking these parts will cause the interior of the unit to

overheat and will result in fire or other damage.

❑

Do not install the product where it is exposed to

strong vibrations or is unstable.

Avoid slanted or strongly curved surfaces for installation. If

the installation is not stable, the unit may fall down while

driving and this can lead to an accident or injury.

❑

Installation Angle

The product should be installed in a horizontal position with

the front end up at a convenient angle, but not more than

30˚.

The user should bear in mind that in some areas there may

be restrictions on how and where this unit must be installed.

Consult your dealer for further details.

❑

Wear gloves for safety. Make sure that wiring is

completed before installation.

❑

To prevent damage to the unit, do not connect the

power connector until the whole wiring is complet-

ed.

❑

Do not connect more than one speaker to one set of

speaker leads. (except for connecting to a tweeter)

Observe the following cautions when handling

the battery for the remote control unit.

●

Use only specified battery (CR2025).

●

Match the polarity of the battery with the (+) and (–) marks

in the battery case.

●

Replace dead battery as soon as possible.

●

Remove the battery from the remote control unit when not

using it for an extended period of time.

●

Insulate the battery (by placing them in a plastic bag or cov-

ering them with vinyl tape) before disposal or storage.

●

Dispose of the battery according to the local regulations.

●

Do not disassemble, recharge, heat or short the battery. Do

not throw a battery into a fire or water.

In case of battery leakage

●

Thoroughly wipe the battery liquid off the battery case and

insert new battery.

●

If any part of your body or clothing comes into contact with

battery liquid, wash it with plenty of water.

●

If battery liquid comes into contact with your eyes, wash

them with plenty of water and get immediate medical atten-

tion.

Safety Information

CQ-C8803N

Panasonic welcomes you to our constantly growing family of electronic products owners.

We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully

selected components, and assembled by people who are proud of the reputation their work has built for our company. We

know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have

built into it, you too will be proud to be a member of our family.

The instruction manual consists of 2 books. One is “Operating Instructions” describing the operations of the main unit. The other is

“System Upgrade Guidebook” describing the optional devices such as CD changer.

Before Reading These Instructions

Laser Product

Label Indications and Their Locations

CAUTION

LASER RADIATION WHEN OPEN. DO NOT STARE INTO

BEAM.

CLASS 1 LASER PRODUCT

Deck Ass’y (Upper Side)

VAROITUS – LASER-

SÄTEILYVAARA

AVATTAESSA. VARO

ALTISTUMISTA

SÄTEELLE.

FÖRSIKTIGHET –

LASERSTRÅLNING I

ÖPPNAT LÄGE. UNDVIK

ATT UTSÄTTAS FÖR

STRÅLEN.

ADVARSEL – LASER-

STRÅLING. UNNGÅ

EKSPONERING FOR

STRÅLEN VED ÅPNING.

ÇçàåÄçàÖ – ãÄáÖêçéÖ

àáãìóÖçàÖ èêà

éíäêõíàà. àáÅÖÜÄíú

ÇéáÑÖâëíÇàü ãÄáÖêçéÉé

àáãìóÖçàü.

CAUTION - LASER RA-

DIATION WHEN OPEN.

AVOID EXPOSURE TO

BEAM.

VORSICHT - LASER-

STRAHLUNG, WENN

GEÖFFNET. VERMEIDEN

SIE EIN AUSSETZEN

GEGENÜBER DEM

LASERSTRAHL.

ATTENTION –

RAYONNEMENT LASER

SI OUVERT, ÉVITER

TOUTE EXPOSITION AU

FAISCEAU.

ADVARSEL – LASER

UDSENDES NÅR DER

ER ÅBNET. UNDGÅ

UDSÆTTELSE FOR

STRÅLER.

Caution

THIS PRODUCT IS A CLASS 1 LASER PRODUCT.

USE OF CONTROLS OR ADJUSTMENTS OR PER-

FORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR BY

YOURSELF. REFER SERVICING TO QUALIFIED PER-

SONNEL.

Do not take apart this unit or attempt to

make any changes yourself.

This unit is a very intricate device that uses a laser

pickup to retrieve information from the surface of

compact discs. The laser is carefully shielded so that

its rays remain inside the cabinet.

Therefore, never try to disassemble the player or alter

any of its parts since you may be exposed to laser

rays and dangerous voltages.

Before Reading These Instructions

English

Safety Information, Before Reading These Instructions

CQ-C8803N

Accessories

SEL

SRC

BAND MUTE

2 31

VOL

DISP

CAR AUDIO

SEL

POWER

SOURCE

SRC

SET

BAND MUTE

231

VOL

RANDOM

NUMBER

TUNE TUNE

SCAN REPEAT

DISP

Remote Control Unit

(including a battery)

(CR2025)

Mounting Collar

Trim PlatePower Connector

(EUR7641010)

Q'ty: 1

(YEFX0217314)

Q'ty: 1

(YEFC051013)

Q'ty: 1

(YGAJ021010)

Q'ty: 1

Lock Cancel Plate Mounting Bolt

(5 mmø)

ISO Antenna

adaptor

(YEP0FZ5740)

Q'ty: 1 set

Notes:

¡ The number in parenthesis underneath each accessory part name is the part number

for maintenance and service.

¡ Accessories and their parts numbers are subject to modification without prior notice

due to improvements.

¡ Mounting Collar and Trim Plate are mounted on the main unit at shipment.

Removable Face

Plate Case

(YEFA134145)

Q'ty: 1

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

OO-OOOOO

XXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXX

XXXXXXXXXXXXXXXX

OO-OOOOO

Operating

Instructions

(YEFM285767)

Q'ty: 1

System Upgrade

Guidebook

(YEFM262688)

Q'ty: 1

Installation

Instructions

(YEFM294131)

(YEFM294132)

(YEFM294133)

Q'ty: 1

PAN EUROPEAN

GUARANTEE

(Warranty Card)

Q'ty: 1

CQ-C8803N

Features

Hands-Free Phone System

Connection of the optional Bluetooth hands-free kit (Hands-Free

Kit featuring Bluetooth

technology: CY-BT100N) allows users

to talk on a handsfree cellular phone if the phone supports

Bluetooth.

Note: This unit is designed only for receiving calls. It cannot

send calls.

Bluetooth

The Bluetooth word mark and logo are owned by the

Bluetooth SIG, Inc. and any use of such marks by

Matsushita Electric Industrial Co.,Ltd. is under license.

Other trademarks and trade name are those of their respec-

tive owners.

Expansion Module (hub unit)

Connection of the Expansion Module (hub unit, CY-EM100N)

allows users to connect up to 4 optional devices shown below.

Wide array of components for system upgrade

Various optional components allow users to obtain availability

of wide range of system upgrade. Upgrading the system

delivers relaxed AV space in a car. For further information, refer

to the separate System Upgrade Guidebook.

¡ DVD Changer

The optional adapter (Conversion Cable for DVD/CD

Changer: CA-CC30N) allows you to connect the optional

Panasonic DVD changer unit (CX-DH801N).

¡ CD Changer

The optional adapter (Conversion Cable for DVD/CD

Changer: CA-CC30N) allows you to connect the optional

Panasonic CD changer unit (CX-DP880N).

¡ iPod

The optional adapter (Direct Cable for iPod: CA-DC300N)

allows you to connect the optional iPod series.

iPod is a trademark of Apple Computer, Inc., registered in

the U.S. and other countries.

Sound Control

SQ (Sound Quality)

You have six preset modes (FLAT, ROCK, POP, VOCAL, JAZZ,

CLUB). You can customize your settings for these and save

them for instant recall.

SQ9

This is 9-band equalizer with 62.5, 125, 250, 500, 1 k, 2 k, 4 k,

8 k, and 16 kHz (default). Each band is adjustable between – 12

dB and 12 dB in steps of 2 dB.

Customize

Initially stored moving images and still images are editable to

taste. IMAGE STUDIO* allows you to process images from a

digital camera or other devices without difficulty. (a page 36)

* This software is downloadable from Panasonic Web site

(http://panasonic.co.jp/pas/en/software/customize/index.html

)

Full Digital CD Receiver

The CQ-C8803N uses Radio DSP for digital conversion and

processing of FM/AM signals, and a digital amp to provide

amplification of the digital data. With this technology, Panasonic

achieves full digital processing of radio and CD signals from

input to speaker output. This means faithful reproduction of the

original sound.

Radio DSP

By digitally converting and processing FM/AM broadcast

signals, this greatly reduces adjacent interference and multipath

distortion.

A radio's IF filter has the job of preventing neighboring

broadcast frequencies from interfering with reception of your

desired station. Panasonic's Radio DSP uses an advanced

algorithm to perform this task with digital control. It maintains

the optimum balance between noise suppression and sound

quality by automatically adjusting the IF filter bandwidth in

response to the changing interference characteristics as you

drive.

This symbol on the products and/or accompanying documents means that used electrical and elec-

tronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling, please take these products to designated collection

points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may

be able to return your products to your local retailer upon the purchase of an equivalent new product.

Disposing of this product correctly will help to save valuable resources and prevent any potential neg-

ative effects on human health and the environment which could otherwise arise from inappropriate

waste handling. Please contact your local authority for further details of your nearest designated col-

lection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legisla-

tion.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)

CQ-C8803N

WMA MP3 CD Player/Receiver

CQ-C8803N

Contents

¡Safety Information 2

¡Before Reading These Instructions 4

¡Features 6

¡Controls Layout 8

¡Preparation (ACC Setting etc.) 10

¡General 12

¡Sound Control 16

¡Radio 19

¡Radio Data System (RDS) in FM Broadcasting 22

¡CD Player 26

¡MP3/WMA Player 28

¡Audio Setting 32

¡Function Setting (Security Function Setting etc.) 34

¡Display Setting 35

¡Customize the Display (Customize Function) 36

¡Troubleshooting 38

¡Error Display Messages 43

¡Notes on Discs 44

¡Maintenance 44

¡Specifications 45

CommonEach

Source

As Needed

English 2

Deutsch 46

Français 90

Nederlands 134

Svenska 178

Italiano 222

Español 266

Dansk 310

êêÛÛÒÒÒÒÍÍËËÈÈ

354

Controls Layout

Note: This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)

CQ-C8803N

Main Unit

Disc slot

When Face Plate

Opens

Pause/Play

(a page 26, 28)

BAND (a page 19)

SET (a page 34, 35)

APM Auto Preset Memory

(a page 19)

CQ-C8803N

D M

DISP

PTY

SRC Source (a page 14)

PWR Power (a page 12)

SQ Sound Quality

(a page 17)

MENU (a page 34, 35)

DIM Dimmer (a page 15)

VOLUME (a page 13)

PUSH SEL Select

(a page 32, 33)

SRS CS (a page 16)

TUNE (a page 19)

TRACK (FILE)

(a page 26, 28)

P·SET Preset (a page 19)

DISC (a System Upgrade

Guidebook)

FOLDER (a page 28)

D (DISP) Display (a page 15)

PTY Programme Type

(a page 25)

Release (a page 12)

u Eject (a page 13)

TILT (a page 13)

OPEN (a page 13)

MUTE (a page 13)

SBC-SW Super Bass

Control-Subwoofer

(a page 18)

D·M Direct Memory

(a page 21)

Remote Control Sensor

Traffic Announcement

(a page 24)

CQ-C8803N

English

Although most of the functions of this unit are executable

with both the main unit and remote control, the following

functions are excluded.

perations executable only with main unit

¡ Face panel’s opening, closing, tilting, and removal

actions (a page 13)

¡ Disc ejection (a page 13)

¡ Dimmer (a page 15)

¡ CS AUTO on, off, and adjustment (a page 16)

¡ SQ on, off, and adjustment (a page 17)

¡ Direct memory setting and calling (a page 21)

¡ TA ON/OFF (a page 24)

Operations executable only with remote control

¡Preset station calling with one-touch operation

(a page 19)

¡ Direct access to tracks on CDs (a page 27, 29)

¡ Random and repeat play with one-touch operation

(a page 27, 29)

¡ Scan playback (a page 27, 29)

¡ PI seek (a page 23)

Controls Layout

Remote Control UnitOperations executable only with main unit/

operations executable only with remote control

SEL

SRC

BAND

MUTE

2 31

VOL

DISP

CAR AUDIO

SEL

POWER

SOURCE

SRC

SET

BAND MUTE

231

VOL

RANDOM

NUMBER

TUNE TUNE

SCAN REPEAT

DISP

POWER

SRC (SOURCE)

MUTE

SBC-SW Super Bass

Control-Subwoofer

BAND

Pause/Play

SET

APM

Auto Preset

Memory

SEL Select

VOL Volume

}:Up

{:Down

DISP Display

RANDOM

SCAN

REPEA

NUMBE

Number Buttons

–

Number

RANDOM

0 to 9

SCAN

REPEAT

TUNE

TRACK (FILE)

P·SET

(Preset)

DISC (FOLDER)

Preparation

CQ-C8803N

Cancellation of demonstration screenRemote Control Preparation

Preparation Before Initial Use

Pull the insulation film out

from the backside of

remote control gently.

Battery Replacement

q Remove the battery holder

with the remote control unit

placed on a flat surface.

q Stick your thumbnail into

the groove, and push the

holder in the direction of

the arrow, and at the

same time.

w Pull it out in the direction

of the arrow using a

tough pointed object.

w Put a battery in the case

with (+) side facing up.

e Put the case back.

Tough pointed object

Back side

Insulation film

Warning

Keep batteries and insulation film out of reach of

infants. If an infant ingests a battery, please seek

immediate medical attention.

Cautions

¡Remove and dispose of an old battery immediately.

¡Do not disassemble, heat or short a battery. Do not

throw a battery into a fire or water.

¡Follow local regulations when disposing of a battery.

¡Improper use of a battery may cause overheating, an

explosion or ignition, resulting in injury or a fire.

Note: Battery Information:

Battery Type: Panasonic lithium battery (CR2025)

(Included in the remote control)

Battery Life: Approximately 6 months under normal use

(at room temperature)

For the first use, the following screen may appear

repeatedly.

Set your car's ignition switch to the ACC

or On position.

Press [SRC] (PWR: POWER).

The demonstration screen appears.

Press [MENU] to display the menu

display.

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

Press []] or [[] to display the

DISPLAY menu.

Press [{] or [}] to select

“DEMONSTRATION”.

Press [BAND] (SET) to select “OFF”

Press [MENU].

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

Note: This unit is operable as usual even if the

demonstration screen is activated. The demonstration

screen automatically appears if no operation is executed

for 1 minute.

CQ-C8803N

English

Notes:

¡ Adjust the clock when “NO CT” appears on the dis-

play.

¡ When a broadcast of FM Radio Data System is

received, the clock is put right automatically by the

Clock Time service. (a page 22)

Press [MENU] to display the menu

display.

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

Press []] or [[] to display the

DISPLAY menu.

Press [{] to select “CLOCK ADJ”.

Press [BAND] (SET) to confirm the

display.

Adjust the setting value.

[[]

Adjusting minutes

[]]

Adjusting hours

[}]

Forward

[{]

Backward

Press [BAND] (SET) to confirm the

adjustment.

Press [MENU].

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

You may need to set the following depending on the

devices to be connected.

Using Subwoofer

¡ Subwoofer level adjustment (a page 33)

¡ Subwoofer low pass filter (a page 33)

Connecting an AV device (TV, VTR)

If you connect TV to AUX1 terminal, set the AUX1 setting

to TV.

Press [SRC] (SOURCE) to select the

AUX1 mode. (a page 14)

Press [MENU] to display the menu display.

For using the remote control, hold down [MENU]

for 2 sec. or more.

Press [BAND] (SET) to adjust.

: For connection of other than a TV (default)

: For connection of a TV

Press [MENU] to confirm the adjust-

ment.

The following functions are activated when the Security

Function is ON. (a page 34)

¡ The security indicator lights up when removing the

face plate.

¡ The alarm sounds and the message appears on the

screen to warn you to remove the face plate at ACC

off. (The above phenomenon occurs when the ACC

setting of the unit is set to ON at the ignition key is at

the ACC off position or when the ACC setting of the

unit is set to OFF at the power of the unit is off)

Security Indicator

Preparation

Security Function

Setting

For a ACC-equipped car, select ON. (a page 34) The

following functions are available. (default: off)

¡ The power is turned on automatically when inserting a

disc.

¡ The clock can be displayed even if the power is off.

(a page 15)

Caution

Be sure to select OFF when

your car has no ACC

position in the ignition

switch. Failure to do this

could cause the battery to

go dead.

ACC SettingClock adjustment Other Settings

OFF

ACC

IGN

Power on

Press [SRC] (PWR: POWER).

Power off

Hold down [SRC] (PWR: POWER) until you

hear a beep, then release it.

General

This chapter explains how to turn on or off the power, how to adjust the volume, etc.

CQ-C8803N

You can remove the face plate to prevent it from being

stolen.

Removing

Turn off the power (a page 12)

Press [] (Release).

(The face plate disengages with a click when it is

removed.)

The face plate auto-

matically closes after a

lapse of 5 seconds

while it is open.

The power is automat-

ically turned off while

the unit is active.

Put the face

plate in the case.

Mounting

Slide the left side of the face plate in

place.

Press the right end of the face plate

until “click” is heard.

Cautions:

¡ It is recommended to remove or mount the face

plate when the plate is at the closed position.

Do not remove or mount the face plate when the

plate is in motion.

¡ This face plate is not waterproof. Do not expose it to

water or excessive moisture.

¡ Do not remove the face plate while driving your car.

¡ Do not place the face plate on the dashboard or

nearby areas where the temperature rises to high

levels.

¡ Do not touch the contacts on the face plate or on the

main unit, since this may result in poor electrical

contacts.

¡ If dirt or other foreign substances get on the con-

tacts, wipe them off with clean and dry cloth.

¡ To avoid damaging the face plate, do not push it

down or place objects on it while it is open.

D M

CQ-C8803N

DISP

PTY

D M

CQ-C8803N

Power On/off

(PWR: POWER)

Face Plate Removing/Mounting

(ANTI-THEFT SYSTEM)

CQ-C8803N

English

Open/Eject

Press [u] (OPEN).

When a disc is already loaded, the disc will automatically

be ejected.

Press [u] (OPEN).

Tilt

The display angle changes among 4 levels as follows

every time you hold down [u] (TILT) for 1 sec. or

more and release.

Note: The last selected

angle is memorized even

after turning off the power.

Notes:

¡ The volume level can be set independently for each

source. (For radio, one volume setting for AM

(LW/MW), one volume setting for all FMs)

¡ The volume is not adjustable while an error display is

on the monitor. (a page 43)

¡ This unit memorizes individual volume levels for each

source. Make volume adjustments of each source

appropriately to prevent large volume fluctuation when

the source is changed.

q Up

w Down

Setting Range: 0 to 40

Default: 18

Volume off (down)

Press [MUTE].

Cancel

Press [MUTE] again.

Note:

Volume-down range can be specified.

(

page 34)

CQ-C8803N

DISP

PTY

D M

CQ-C8803N

DISP

PTY

D M

General

Face Plate Motion (Open/Close, Tilt)

(OPEN/CLOSE, TILT)

Volume Adjustment

(VOLUME)

Temporary Volume Off (Down)

MUTE (ATT: ATTENUATION)

Cautions:

¡ To avoid damaging the face plate, do not push it

down or place objects on it while it is open.

¡ Do not pinch your finger or hand in the face plate.

¡ Do not insert foreign objects into the disc slots.

¡ For the following cases, the face plate automatical-

ly closes. Use caution not to catch your finger.

¡ After a lapse of 20 seconds

¡ When a disc is inserted

¡ When the face plate is removed (a page 12)

¡ When the power is set to off (at ACC-off)

TILT 1

TILT 2

TILT 3

OPEN

TILT OFF

General

CQ-C8803N

Radio

FM1, FM2, FM3, AM (LW/MW) (a page 19)

Source Selection

(SOURCE)

The source changes as follows every time

[SRC: SOURCE] is pressed.

D M

CQ-C8803N

DISP

PTY

Player

When loading CD (a page 26)

When loading MP3/WMA disc (a page 28)

AUX 1

Device connected to the AUX terminal of the this unit

System-up Connector

Device connected to the System-up Connector of the

this unit

When optional devices are connected:

Shift to connected devices

When an expansion module is connected:

The devices connected to the ports 1 to 4 are activated

in sequence after shifting to AUX2 (devices connected

to the AUX terminal of the expansion module).

Note: For information about connectable devices, refer

to the System Upgrade Guidebook or the instruction

manual for each device.

When connecting DVD Changer

When connecting CD Changer

When connecting iPod Player

When connecting Expansion Module

When connecting a TV (a page 11)

When connecting other than a TV

CQ-C8803N

General

English

The display changes as follows every time [D] (DISP:

DISPLAY) is pressed.

Note: The graphic pattern and still image are selectable.

(a page 35)

At power-off:

Note: The clock appears only at ACC on setting.

Clock display (default)

Mode

Folder hierarchy (MP3/WMA mode only.)

Ordinary display + graphic pattern

Ordinary display + still image

Ordinary display + clock

Display OFF

All displays disappear in 5 seconds.

CQ-C8803N

DISP

PTY

D M

At power-on:

Off

Only still image

Display Change

(DISP: DISPLAY)

The dimmer level changes as follows every time you hold

down [MENU] (DIM: DIMMER) for 2 sec. or more.

Dimmer Control

(DIM: DIMMER)

Note: This setting is not adjustable with the remote

control.

CQ-C8803N

DISP

PTY

D M

Brighter (default)

Medium

Darker

Only graphic pattern

Sound Control

This unit is equipped with CS AUTO technology as well as conventional tone adjustment. Select your favorite sound world.

CQ-C8803N

CS AUTO

(

Circle Surround

Automotive )

CS AUTO Setting

(CS AUTO Menu Display)

CS AUTO allows your car interior to change to a splendid

audio room in a moment. Every speaker can be fine-

tuned.

You can toggle the CS AUTO function on and off every

time you hold down [VOLUME] (SRS CS) for 2 sec or

more.

Note: If you enable CS AUTO, the following functions

are automatically disabled:

SQ, POSITION, BASS/TREBLE, BALANCE/FADER, SUB-

WOOFER LEVEL, LPF, HPF, SBC-SW

D M

CQ-C8803N

DISP

PTY

You can make a fine adjustment to CS AUTO.

Set the CS AUTO mode to on.

Hold down [SQ] for 2 sec. or more to

display the audio menu display.

Press [BAND] (SET) to adjust.

Press [D] (DISP: DISPLAY) to confirm

the adjustment.

CS AUTO MODE

Three-dimensional natural sound field is reproduced with

clarity in response to sound.

: Music

(default in other than the AM mode)

: Cinema

: Monaural (default in the AM mode)

DISP

PTY

CQ-C8803N

D M

Lights when CS AUTO is activated.

At CS Auto ON

Available items

¡ Mode selectable from among MUSIC/CINEMA/

MONO (a page 16)

Adjustable items in audio setting (a page 32)

FRONT-TruBass, REAR-TruBass, SUB.W-TruBass,

FRONT-FOCUS, REAR-FOCUS, F-R MIX

At CS Auto OFF

The following items are available only at CS AUTO off.

Available items

¡ SQ (mode selectable from among

FLAT/ROCK/POP/VOCAL/JAZZ/CLUB) (a page 17)

¡ SQ advanced setting/POSITION (a page 17)

¡ SBC-SW (a page 18)

Adjustable items in audio setting (a page 33)

Bass, Treble, Balance, Fader, Subwoofer level adjustment,

Subwoofer Low Pass Filter, High Pass Filter

Sound control

is a trademark of SRS Labs, Inc.

CS Auto technology is incorporated under license

from SRS Labs, Inc.

CQ-C8803N

English

Sound Control

The equalizer curve is selectable from among preset 6

types (FLAT, ROCK, POP, VOCAL, JAZZ, and CLUB)

depending on your listening category.

Note: SQ is not changeable when CS AUTO is enabled.

(a page 16)

SQ changeover

The SQ category is changed every time [SQ] (SOUND

QUALITY) is pressed.

Note: Setting of SQ, bass/treble and volume are

influenced one another. If the influence mentioned above

causes distortion to the audio signal, readjust bass/treble

or volume. (a page 33)

Lights when SQ is activated.

SQ is adjustable in accordance with your taste.

Hold down [SQ]

(SOUND QUALITY)

for 2 sec. or more

when CS AUTO is dis-

abled.

Press [}] or [{] to select a function to

be adjusted.

Press [BAND]

(SET) to adjust.

Adjust the setting value.

Press [D] (DISP: DISPLAY) to confirm

the adjustment.

SQ ADJUSTMENT (SQ9)

(Band: 62.5, 125, 250, 500, 1 k, 2 k, 4 k, 8 k, and 16 kHz

(default), Setting range: –12 dB to 12 dB, in 2 dB steps)

You can make a fine adjustment to the currently selected

SQ presetting in each type.

[]][[]: Frequency band selection

qw: Frequency selection

[

}][{]: Level up/down

Note: If you hold down [BAND] for 2 sec. or more, the

presetting that is called up can be turned into the default.

POSITION

You can make the optimal sound field in accordance with

your seat.

[]][[]: Selection

( ): Disabled (default)

( ): Right side of front seat

( ): Left side of front seat

( ): Both sides of front seat

( ): Both sides of rear seat

CQ-C8803N

DISP

PTY

D M

CQ-C8803N

D M

SQ Selection Based on Genre

(SQ: SOUND QUALITY)

SQ adjustment

(USER)

DISP

PTY

CQ-C8803N

Sound Control

The rear speaker can be used as a substitutional

subwoofer when a subwoofer is not connected.

Holding down [MUTE] (SBC-SW) for 2 sec.

or more toggles SBC-SW on and off.

CQ-C8803N

DISP

PTY

D M

Lights when SBC-SW is activated.

Off (default)

Notes:

¡ If ON is selected, the settings of subwoofer level

adjustment and subwoofer low pass filter are activat-

ed. (a page 33)

¡ SBC-SW is not changeable when CS AUTO is enabled.

(a page 16)

Substitutional Subwoofer

(SBC-SW: SUPER BASS CONTROL·SUBWOOFER)

CQ-C8803N

Radio

English

Radio

This chapter explains how to listen to the radio.

Press [SRC] (SOURCE) to select the

radio mode.

Press [BAND] to select a band.

Notes:

¡ For tuning in on only stations whose receiving condi-

tions are good in the station search, set LOCAL to ON.

(a page 20)

¡ For reducing noise when a receiving FM stereo wave

is weak, set MONO to ON. (a page 20)

Select a station.

Frequency adjustment

[]] (TUNE): Lower

[[] (TUNE): Higher

Note: Hold down for 0.5 sec. or more and release

for station search.

Preset station selection

[{] (P·SET: PRESET): Lower preset number

[}] (P·SET: PRESET): Higher preset number

Note: Direct selection can be executed with [1] to

[6] buttons on remote control.

CQ-C8803N

DISP

PTY

D M

Operation Flow

Up to 6 stations can be preset in AM (LW/MW), FM1,

FM2, and FM3 respectively.

Preset stations can be simply called up by pressing [}]

(P·SET) or [{] (P·SET).

Notes:

¡ Direct selection can be executed with [1] to [6] but-

tons on remote control.

¡ You can switch between 6 and 18 for FM presetting

stations. (EACH BAND/ALL BAND)

Auto Preset Memory (APM)

Stations with good receiving conditions automatically

preset.

Select a band.

Hold down

[BAND] (APM)

for 2 sec. or

more.

The preset stations under best receiving conditions

are received for 5 sec. each after presetting the sta-

tions (SCAN). To stop scanning, press [}] or [{].

Notes:

¡ New stations overwrite existing saved stations.

Only RDS stations will be saved at default setting (AF ON).

To select non RDS stations too, set AF OFF. (a page 24)

Manual station preset

Tune in to a station.

Hold down [}] or [{] for 2 sec. or

more.

Select a preset number by pressing

[}] or [{].

Note: If [BAND] is pressed while receiving an FM

station, FM broadcasting is changeable among FM 1

to FM 3.

Hold down [BAND] (SET) for 2 sec. or

more to determine the selection.

Notes:

¡ In step 2, a station can be registered by holding down

the numeric button [1] to [6] for 2 sec. or more.

¡ To stop presetting stations, press [D] (DISP: DIS-

PLAY).

¡ The operation above allows users to replace the cur-

rent station with the station preset in the selected

number while selecting a preset station.

DISP

PTY

Sound Control

Station Preset

(APM: AUTO PRESET MEMORY P·SET: PRESET)

CQ-C8803N

Radio

Band

Frequency

Preset Number

Radio Mode Display

Lights when LOCAL is

activated. (a page 20)

Lights while receiving an FM stereo signal.

Lights when MONO is activated. (a page 20)

Radio Menu Display

In the AM mode, only AUDIO FILTER and LOCAL can be

selected.

Press [MENU] to

display the menu

display.

For using the remote

control, hold down

[SEL](MENU) for 2

sec. or more.

Press [}] or [{] to select a mode to be

adjusted.

Press [BAND]

(SET) to adjust.

Press [MENU] to

confirm the

adjustment.

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

MONO (Monaural)

Noise reduction when the signal strength decreases

: Receiving in stereo (default)

: Receiving in mono and reducing the noise level

LOCAL

Setting when searching for a station

: Searching even for a relatively low-intensity

radio wave station (default)

: Searching only for a high-intensity radio wave

station

AUDIO FILTER (IF)

IF filter setting for noise suppression

: Wide range

: Middle range (default)

: Narrow range

PRESET

You can select 6 or 18 stations for FM presetting with the

use of APM.

Presets 6 stations to FM1 to FM3 respectively, that is, 18

stations in total at the same time. This function is useful

for presetting more than 6 stations. (default)

Presets 6 stations with good reception to the selected

band from FM1 to FM3. This function is useful for preset-

ting stations in different areas in different bands.

D·M SET

(a page 21)

DISP

PTY

DISP

PTY

English

CQ-C8803N

Radio

You can register frequencies via an FM transmitter inte-

grated in a mobile audio device. Then, you can call up

those frequencies with a single touch of button from the

CD mode, changer mode, etc. (default: FM 87.50 MHz)

Frequency setting

Receive an FM broadcast station via

your FM transmitter. (a page 19)

Press [MENU] to call up the menu

screen.

Press [}] or [{] to select “D·M SET”.

Press [BAND] to register the frequen-

cy.

Press [MENU] to resume the normal

mode.

Note: If there is something wrong with treble sound,

activate the radio audio filter according to your equip-

ment. (a page 21)

Hold down [TA] (D·M)for 2 sec. or more.

Listening to an FM station via an

FM transmitter

CQ-C8803N

DISP

PTY

D M

Via FM transmitter

(D·M: DIRECT MEMORY)

D·M Menu Display

Press [MENU] to display the menu dis-

play.

For using the remote

control, hold down

[SEL](MENU) for 2

sec. or more.

Press [BAND]

(SET) to adjust.

Press [MENU] to confirm the adjust-

ment.

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

RADIO AUDIO FILTER

You can select the reception status (band) of FM stations

registered on D·M.

: Off (default)

: High cut level 1

: High cut level 2 (same processing at receiving

an FM station)

DISP

PTY

DISP

PTY

Radio Data System (RDS) in FM Broadcasting

Useful functions such as AF, TA, PTY, etc. are available in the RDS (Radio Data System)-ready areas.

What is RDS?

Some FM stations are broadcasting added data

compatible with RDS. This radio set offers convenient

functions using such data.

RDS service availability varies with areas. Please

understand if RDS service is not available in your area,

the following service is not available, either.

The following functions are available when receiving RDS

stations.

AF (Alternative Frequency)

The following functions are available when the AF mode

is active (a page 24).

¡ When receiving conditions become bad, a station with

better receiving conditions is automatically tuned in

to.

¡ When executing APM, only RDS stations are selected.

¡ When calling up a preset station, a best receiving sta-

tion is selected automatically. (BSR Best Stations

Research)

Note: The AF available range can be adjusted.

(a page 24)

TA (Traffic Announcement)

The following functions are

available when the TA mode

is active. (a

page 24

)

¡ A TP (Traffic program)

station is automatically

searched for and

received at the instant

of toggling the TA mode

on if you are receiving a

non-TP station.

¡ When executing station search or APM, only TP sta-

tions are selected.

¡ Setting to TA on with the unit in another mode, it will

automatically switch to radio mode and output the

traffic announcement when the traffic announcement

begins. The traffic announcement having finished, the

unit will return to the previous mode. (TA Standby

Mode)

PTY (Program Type)

The following functions are available when the PTY mode

is active (a page 25).

¡ The PTY of receiving station appears.

¡ Programs can be searched for by PTY.

Note: PTY language can be selected (a page 25).

Other functions of RDS

CT (Clock Time)

The clock is automatically adjusted.

PS (Program Service Name)

As well as the frequency, the name of the broadcast

station appears.

EON (Enhanced Other Network)

RDS information is updated constantly in response to the

current position.

EON-TA

Traffic information from the current and other network

stations can be received.

Emergency Announcement Reception

Emergency announcement automatically appears on the

display when it is received.

Lights while receiving the EON signal.

CQ-C8803N

Lights while receiving a TP

station (that broadcasts

TA).

Program Service Name

Lights when TA is activated.

TA receiving display

PTY on display

Lights while receiving the

TA signal.

Receiving station PTY

Lights when AF is

activated.

Lights when PTY is

activated.

PI Seek (Program Identification Seek)

(only by remote control unit)

If reception becomes poor when tuning in a preset

station, press the same preset number button. The same

station with better reception will be searched for.

Press the same preset number button again to cancel.

Note: For PI Seek, cancel the TA mode first, then

execute PI Seek.

RDS mode displayPI Seek

(PI SEEK: PROGRAM IDENTIFICATION SEEK)

SEL

SRC

BAND

MUTE

2 31

VOL

DISP

CAR AUDIO

SEL

POWER

SOURCE

SRC

SET

BAND MUTE

VOL

RANDOM

NUMBER

TUNE TUNE

SCAN REPEAT

DISP

231

564

English

Radio Data System (RDS) in FM Broadcasting

CQ-C8803N

Radio Data System (RDS) in FM Broadcasting

(TA: TRAFFIC ANNOUNCEMENT)

TA ON/OFF

Pressing [TA] toggles TA on and off.

Notes:

¡ This operation is not adjustable by the remote control.

¡ Traffic information is available in monaural.

¡ Adjust the TA volume only while receiving a TA.

Lights when TA is activated.

Press [MENU] to display the menu dis-

play.

For using the remote

control, hold down

[SEL] (MENU) for 2

sec. or more.

Press [}] or [{] to select a mode to be

adjusted.

Press [BAND]

(SET) to adjust.

Press [MENU] to confirm the adjust-

ment.

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

Adjusting the AF sensitivity

: AF on ( lights.) (default)

: AF off

REGION

Setting the AF range

: The frequency is changed also for programs

outside the region. (default)

: The frequency is changed only for programs

within the region.

AF/Region Setting (FM Menu Display)

(AF: ALTERNATIVE FREQUENCY/REGION)

DISP

PTY

DISP

PTY

CQ-C8803N

DISP

PTY

D M

CQ-C8803N

PTY

(PTY: PROGRAM TYPE)

PTY ON/OFF

Holding down [D] (PTY) for 2 sec. or more toggles PTY

mode on and off.

Program Search by PTY

Programs can be searched for by use of PTY that has

been originally preset.

Press [}] or [{] to select PTY in the PTY

mode.

Another station in the same PTY is searched for by

pressing [BAND] (SET).

Notes:

¡ Direct Access can be executed with [1] to [6] buttons

on remote control.

¡ When there is no corresponding program type station,

“NONE” is displayed.

¡ A desired PTY appears for 5 seconds.

¡ Preset contents are changeable.

Detailed PTY Selection

Press []] or [[] to select PTY.

Press [BAND] (SET).

Search starts.

Notes:

¡ To stop searching, press [BAND] (SET).

¡ When there is no corresponding program type station,

“NONE” is displayed.

PTY Preset Change

Original PTY presets can be changed as you like.

Select a PTY that you would like to pre-

set.

Follow the procedure of ordinary preset-

ting. (a page 19)

PTY language selection

Note: PTY language is selectable only when PTY

appears.

Press [MENU] to display the menu dis-

play.

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

Press [BAND] (SET) to adjust.

:English a :German

a :Spanish a :

Swedish

a :Italian a :French

a :Dutch a (Back to ENGLISH)

Press [MENU] to confirm the adjust-

ment.

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

Program Type Contents

1 NEWS NEWS

2 SPEECH AFFAIRS, INFO, EDUCATE,

DRAMA, CULTURE, SCIENCE,

VARIED, WEATHER, FINANCE,

CHILDREN, SOCIAL, RELIGION,

PHONE IN, TRAVEL, LEISURE,

DOCUMENT

3 SPORT SPORT

4 POP M POP M

5 CLASSICS CLASSICS

6 MUSIC ROCK M, EASY M, LIGHT M,

OTHER M, JAZZ, COUNTRY,

NATION M, OLDIES, FOLK M

SPEECH MUSIC NEWS AFFAIRS

INFO SPORT EDUCATE DRAMA

CULTURE SCIENCE VARIED POP M

ROCK M EASY M LIGHT M CLASSICS

OTHER M WEATHER FINANCE CHILDREN

SOCIAL RELIGION PHONE IN TRAVEL

LEISURE JAZZ COUNTRY NATION M

OLDIES FOLK M DOCUMENT

DISP

PTY

English

Radio Data System (RDS) in FM Broadcasting

CQ-C8803N

CD Player

CQ-C8803N

When a disc is already loaded, press [SRC] (SOURCE)

to select the CD mode.

Press [u] (OPEN) to open the face

plate.

When a disc is already loaded ( lights), the

disc will automatically be ejected.

Load a disc with the printed side facing

up.

The face plate closes automatically, and the unit rec-

ognizes the disc and starts playing automatically,

too.

Note: The panel automatically closes after 20 sec-

onds.

Select a desired portion.

Track selection

[7] (TRACK): Next track

[6] (TRACK): Preceding track (press twice)

Note: Hold down for fast forward/reverse.

Pause

Press [BAND] (

Press again to cancel.

Press [u] (OPEN) to eject the disc.

CQ-C8803N

DISP

PTY

D M

Operation FlowCD Mode Display

Printed side

Track number Time

Lights when the disc is

loaded.

Play Mode indicators

Lights when each mode is

activated.

CD-TEXT display

Notes:

¡ For scrolling text, hold down [D] (DISP: DISPLAY)

for 2 sec. or more.

¡ “NO TEXT” is displayed when there is no information

on the disc.

CQ-C8803N

English

CD Player

Cautions:

¡ This unit does not support 8 cm discs.

¡ Do not use irregularly shaped discs. (a page 44)

¡ Do not use discs that have a seal or label attached.

¡ To avoid damaging the face plate, do not push it down or

place objects on it while it is open.

¡ Do not pinch your finger or hand in the face plate when the

face plate is in motion.

¡ Do not insert foreign matter into the disc slots.

¡ Refer to the section on “Notes on CD/CD Media (CD-ROM,

CD-R, CD-RW)” (a page 44).

¡ This unit does not support a MIX mode CD (a CD containing

both CD-DA and MP3/WMA data). In case of using such a

CD, problems may occur such as anacoustic playback.

Random and Repeat play can be set.

Press [MENU] to display the menu dis-

play.

For using the remote

control, hold down

[SEL] (MENU) for 2

sec. or more.

Press [}] or [{] to select a mode to be

adjusted.

Press [BAND]

(SET) to adjust.

Press [MENU] to confirm the adjust-

ment.

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

RANDOM

: Off (default)

: Random playback

REPEAT

: Off (default)

: Playing the current track repeatedly

TEXT (CD-TEXT)

: Enabled (default)

: Disabled

DISP

PTY

Play Mode Selection

One-touch operation is available for selecting a track

playing style by use of [RANDOM] or [REPEAT].

RANDOM

Press [RANDOM].

Press again to cancel.

REPEAT

Press [REPEAT].

Press again to cancel.

SCAN play

You can find your favorite file by playing first 10-sec. of

each track.

Press [SCAN].

Press again to cancel.

Direct Access

A track can be directly selected.

Example: track number 5

Press [#] (NUMBER).

Press [5].

Press [SET].

Note: To suspend direct

selection, press [DISP] (DISPLAY).

Functions Only by

Remote Control Unit

Random, Repeat Play (CD Menu Display)

(RANDOM, REPEAT)

DISP

PTY

MP3/WMA Player

CQ-C8803N

Operation Flow

When a disc is already loaded, press [SRC] (SOURCE)

to select the MP3/WMA mode.

Press [u] (OPEN) to open the face

plate.

When a disc is already loaded ( lights), the

disc will automatically be ejected.

Load a disc with the printed side facing

The face plate closes automatically, and the unit rec-

ognizes the disc and starts playing automatically,

too. (It may take several minutes to start for a disc

that has a lot of files.)

Note: The panel automatically closes after 20 sec-

onds.

Select a desired portion.

Folder selection

[}] (FOLDER): Next folder

[{] (FOLDER): Preceding folder

File selection

[7] (TRACK): Next file

[6] (TRACK): Preceding file (press twice)

Note: Hold down for fast forward/reverse.

Pause

Press [BAND] (

Press again to cancel.

Press [u] (OPEN) to eject the disc.

CQ-C8803N

DISP

PTY

D M

MP3/WMA Mode Display

Printed side

Folder number

Time

Lights when the disc is

loaded.

Play Mode indicators

Lights when each mode is

activated.

Information Display

Notes:

¡ For scrolling text, hold down [D] (DISP: DISPLAY)

for 2 sec. or more.

¡ “NO TEXT” is displayed when there is no information

on the disc.

¡ ID3/WMA tag information is displayed for the album

name and title/artist name.

File number

File type indicator

(Folder Random)

(Folder Repeat)

(Folder Scan)

CQ-C8803N

English

MP3/WMA Player

Notes:

¡ Refer to the section on “Notes on MP3/WMA” (a page 30)

¡ This unit does not support a MIX mode CD (a CD containing both CD-DA and MP3/WMA data). In case of using such a CD,

problems may occur such as anacoustic playback.

Random and Repeat play can be set.

Press [MENU] to display the menu dis-

play.

For using the remote

control, hold down

[SEL] (MENU) for 2

sec. or more.

Press [}] or [{] to select a mode to be

adjusted.

Press [BAND]

(SET) to adjust.

Press [MENU] to

confirm the adjustment.

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

RANDOM

: Off (default)

: Random playback (disc)

FOLDER RANDOM

: Off (default)

: Random playback (folder)

REPEAT

: Off (default)

: Playing the current file repeatedly

FOLDER REPEAT

: Off (default)

: Playing the current folder repeatedly.

TEXT

: Folder name/File name (default)

: Album/Title (tag information)

: No display

Play Mode Selection

One-touch operation is available for selecting a file

playing style by use of [RANDOM] or [REPEAT].

RANDOM, REPEAT

Press the button. Press again to cancel.

FOLDER RANDOM, FOLDER REPEAT

Hold down the button for 2 sec. or more. Hold

down again to cancel.

SCAN play

You can find your favorite file by playing first 10-sec. of

each file.

SCAN (All files)

Press [SCAN]. Press again to cancel.

FOLDER SCAN (1st file in each folder)

Hold down [SCAN] for 2 sec. or more. Hold down

again to cancel.

Direct Access

A file in the current folder can be directly selected.

Example: file number 5

Press [#] (NUMBER).

Press [5].

Press [SET].

Notes:

¡ For folder selection, enter a number after pressing [#]

(NUMBER) twice.

¡ To suspend direct selection, press [DISP]

(DISPLAY).

Random, Repeat Play (MP3/WMA Menu Display)

(RANDOM, REPEAT)

Functions Only by

Remote Control Unit

DISP

PTY

DISP

PTY

MP3/WMA Player

CQ-C8803N

What is MP3/WMA?

MP3 (MPEG Audio Layer-3) and WMA (Windows Media

Audio) are the compression formats of digital audio. The

former is developed by MPEG (Motion Picture Experts

Group), and the latter is developed by Microsoft

Corporation. Using these compression formats, you can

record the contents of about 10 music CDs on a single

CD media (This figures refer to data recorded on a 650

MB CD-R or CD-RW at a fixed bit rate of 128 kbps and a

sampling frequency of 44.1 kHz).

Note: MP3/WMA encoding and writing software is not

supplied with this unit.

Points to remember when making MP3/WMA files

Common

¡ High bit rate and high sampling frequency are recom-

mended for high quality sounds.

¡ Selecting VBR (Variable Bit Rate) is not recommended

because playing time is not displayed properly and

sound may be skipped.

¡ The playback sound quality differs depending on the

encoding circumstances. For details, refer to the user

manual of your own encoding software and writing

software.

MP3

¡ It is recommended to set the bit rate to “128 kbps or

more” and “fixed”.

WMA

¡ It is recommended to set the bit rate to “64 kbps or

more” and “fixed”.

¡ Do not set the copy protect attribute on the WMA file

to enable this unit to play back.

Display Information

Displayed items

Displayable characters

¡ Displayable length of file name/folder name: within 64

characters (Unicoded file and folder names are

reduced by half in the number of displayable charac-

ters.)

¡ Name files and folders in accordance with the stan-

dard of each file system. Refer to the instructions of

writing software for details.

¡ ASCII character set and special characters in each lan-

guage can be displayed.

ASCII character set

A to Z, a to z, digits 0 to 9, and the following sym-

bols:

(space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ

_ ` { | } ~

Notes:

¡ With some software in which MP3/WMA format files

have been encoded, the character information may not

be displayed properly.

¡ Undisplayable characters and symbols will be convert-

ed into an asterisk (

Caution:

Never assign the “.mp3”, or “.wma” file

name extension to a file that is not in the

MP3/WMA format. This may not only pro-

duce noise from the speaker damage, but

also damage your hearing.

¡ CD-TEXT

Disc title

Track title

¡ MP3/WMA

Folder name

File name

¡ MP3 (ID3 tag)

Album name

Title name/artist name

¡ WMA (WMA tag)

Album name

Title name/artist name

Notes on MP3/WMA

CQ-C8803N

English

MP3/WMA Player

¡ You are recommended to minimize the chances of

making a disc that contains both CD-DA files and

MP3/WMA files.

¡ If CD-DA files are on the same disc as MP3 or WMA

files, the songs may not play in the intended order,

or some songs may not play at all.

¡ When storing MP3 data and WMA data on the same

disc, use different folders for each data.

¡ Do not record files other than MP3/WMA files and

unnecessary folder on a disc.

¡ The name of an MP3/WMA file should be added by

rules as shown in the following descriptions and also

comply with the rules of each file system.

¡ You may encounter trouble in playing MP3/WMA files

or displaying the information of MP3/WMA files

recorded with certain writing software or CD

recorders.

¡ The file extension “.mp3” or “.wma” should be

assigned to each file depending on the file format.

¡ This unit does not have a play list function.

¡ Although Multi-session recording is supported, the

use of Disc-at-Once is recommended.

Supported file systems

ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660,

Joliet, Romeo

Note: Apple HFS, UDF 1.50, Mix CD and CD Extra are

not supported.

Recording MP3/WMA files on a CD-media

32, 44.1, 48 kHzYes32 k – 192 kbpsWindows Media Audio Ver. 2, 7, 8, 9*

16, 22.05, 24 kHzYes8 k – 160 kbpsMPEG 2 audio layer 3 (MP3)

32, 44.1, 48 kHzYes32 k – 320 kbpsMPEG 1 audio layer 3 (MP3)

Sampling frequencyVBRBit rateCompression method

Compression formats

(Recommendation: “Points to remember when making MP3/WMA files” on the previous page)

Folder selection order/file playback order

Root Folder

(Root Directory)

Folder Selection

File Selection

Tree 1 Tree 2 Tree 3 Tree 4 Tree 8

(Max.)

–In the order

Maximum number of files/folders

¡ Maximum number of files: 511 (files + folders)

¡ Maximum number of files in one folder: 255

¡ Maximum depth of trees: 8

¡ Maximum number of folders: 255 (Root folder is

included.)

Notes:

¡ You can shorten the duration between data read and

playback by decreasing the quantity of files or folders,

or the depth of the hierarchy.

¡ This unit counts the number of folders irrespective of

the presence or absence of an MP3/WMA file.

¡ If the selected folder does not contain any MP3/WMA

files, the nearest MP3/WMA files in the order of play-

back will be played.

¡ Playback order may be different from other MP3/WMA

players even if the same disc is used.

¡ “ROOT” appears when displaying the root folder

name.

It is prohibited by copyright laws to copy, distribute and

deliver copyrighted materials such as music without the

approval of copyright holder except enjoying yourself

personally.

No warranty

Above description complies with our investigations as of

December 2005. It has no warranty for reproducibility

and displayability of MP3/WMA.

Notes on MP3/WMA (continued)

* WMA 9 Professional/LossLess/Voice are not supported.

CQ-C8803N

Audio Setting

Main volume adjustment

(Setting range: 0 to 40, Default: 18)

q : Up

w : Down

FRONT FOCUS

(Setting range:

Lv 1

10 and OFF, Default:

q : Up

w : Down

REAR FOCUS

(Setting range:

Lv 1

10 and OFF, Default:

q : Up

w : Down

FRONT-TruBass

(Setting range:

Lv 1

10 and OFF, Default:

q : Up

w : Down

REAR-TruBass

(Setting range:

Lv 1

10 and OFF, Default:

q : Up

w : Down

SUB.W-TruBass

(Setting range:

Lv 1

10 and OFF, Default:

q : Up

w : Down

F-R MIX (Front to Rear Mixing)

(Setting range:

Lv 1

10 and OFF, Default:

q : Up

w : Down

Audio Setting (when CS AUTO activated)

Set the CS AUTO mode to on.

(a page 16)

Press [VOLUME]

(

PUSH SEL:

SELECT

) to dis-

play the menu

display.

Press

[VOL-

UME] (

PUSH

SEL: SELECT

)

to select a mode

to be adjusted.

Turn [VOLUME] clockwise or counter-

clockwise to adjust.

Note: If no operation takes place for more than 10 sec.

in the audio menu (2 sec. in Main volume adjustment),

the display returns to the regular mode.

Notes:

¡ TruBass

TruBass is an audio technology to which the technique

of bass sound reproduction used in pipe organs is

electrically applied, and in which an equalizer is not

used at all and bass sound from the speakers to be

used is richly reproduced.

¡ FOCUS

Focus is an audio technology that moves the sound

image of playing sound vertically to reproduce the

sounds of instruments and voices clearly.

English

CQ-C8803N

Main volume adjustment

(Setting range: 0 to 40, Default: 18)

q : Up

w : Down

Bass adjustment

(Setting range:

12 dB to +12 dB, 2 dB Step, Default:

Bass 0 dB)

q : Up

w : Down

Treble adjustment

(Setting range:

12 dB to +12 dB, 2 dB Step, Default:

Treble 0 dB)

q : Up

w : Down

Note: Do not activate SQ and Bass/Treble at same time

to avoid causing sound distortion.

Balance adjustment

(Setting range: L (left)15 to R (right) 15 and Center,

Default: Center)

q : Right enhanced

w : Left enhanced

Fader adjustment

(Setting range: R (rear) 15 to F (front) 15 and Center,

Default: Center)

q : Front enhanced

w : Rear enhanced

Subwoofer level adjustment

(Setting range : mute (

∞),

6 dB to +6 dB, 2 dB Step,

Default: 0

)

q : Up

w : Down

Subwoofer Low Pass Filter

(Setting range: Filter OFF, 60 Hz to 160 Hz, 5Hz Step,

Default: 120 Hz)

q : Up

w : Down

Audio Setting (when CS AUTO disactivated)

Set the CS AUTO mode to off.

(a page 16)

Press [VOLUME]

(

PUSH SEL

SELECT) to dis-

play the AUDIO

menu display.

Press

[VOL-

UME] (

PUSH

SEL

: SELECT)

to select a mode

to be adjusted.

Turn [VOLUME] clockwise or counter-

clockwise to adjust.

Note: f no operation takes place for more than 10

seconds in the audio menu (2 sec. in Main volume

adjustment), the display returns to the regular mode.

High Pass Filter

(Setting range: Filter OFF, 90 Hz to 225 Hz, 5Hz Step,

Default: Filter OFF)

q : Up

w : Down

Subwoofer output range

Other speakers output ranges

Audio Setting

Function Setting

Adjustment to display on the FUNCTION menu

FUNCTION Menu Display

CQ-C8803N

Press [MENU] to display the menu dis-

play.

For using the remote

control, hold down

[SEL] (MENU) for 2

sec. or more.

Press []] or [[] to display the FUNC-

TION menu.

Press [}] or [{] to select a function to

be adjusted.

Press [BAND]

(SET) to adjust.

Press [MENU] to confirm the adjust-

ment.

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

MUTE KEY

Setting [MUTE] buttons’ functions

: Volume off (default)

: Volume down by 10 steps

: Volume down by 5 steps

EXT.MUTE (External Mute)

Volume adjustment when an interruption such as car

navigation signal occurs

: Volume off (default)

: Volume down by 10 steps

: Volume down by 5 steps

: No change in volume

SECURITY

Setting the security function (a page 11)

: ON (default)

: OFF

ACC

Setting depending on your car

: ACC not equipped (default)

: ACC equipped

BUILT-IN AMP

You can toggle the integrated amplifier on and off.

: Amplifier on (default)

: Amplifier off

(when the external amplifier is used)

DISP

PTY

DISP

PTY

lights when disactivated.

(External muting display)

Caution

Be sure to select OFF when your car has no

ACC position in the ignition switch. Failure

to do this could cause the battery to go

dead.

CQ-C8803N

Function Setting, Display Setting

English

Display Setting

Adjustment to display on the DISPLAY menu

DISPLAY Menu Display

Press [MENU] to display the menu

display.

For using the remote

control, hold down

[SEL] (MENU) for 2

sec. or more.

Press []] or [[] to display the

DISPLAY menu.

Press [}] or [{] to select a function to

be adjusted.

Press [BAND]

(SET) to confirm

the display.

Adjust the setting value.

Press [BAND] (SET).

Press [MENU] to confirm the

adjustment.

For using the remote control, hold down [SEL]

(MENU) for 2 sec. or more.

GRAPHIC PATTERN

(Setting range: 5 types, Default: All)

Switching by []] or [[]

All: Sequential display from pattern A to D.

Pattern A-D

DEMONSTRATION

Switching by [BAND].

Demonstration screen at no operation (default)

: Regular screen

STILL IMAGE

(Setting range: 11 types, Default: All)

Switching by []] or [[]

All: Sequential display from pattern 1 to 10

No.1-10

CLOCK ADJ

Note: Adjust the clock when “NO CT” appears on the

display.

[[]: Adjusting minutes

[]]: Adjusting hours

[}]: Forward

[{]: Backward

Notes:

¡ The graphic pattern and still image are changeable.

(a page 36)

¡ If corrupted data is selected, “DISPLAY FILE INCOM-

PLETE” appears. (a page 37)

DISP

PTY

DISP

PTY

CQ-C8803N

Customize the Display (Customize Function)

You can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded from

the Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software,

IMAGE STUDIO. See “Notes on Customize function” (a page 37) as well.

Note: Visit Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html) for details.

CUSTOMIZE Menu Display

Preparation:

Put the CD-R/RW that contains data to

be customized in hand.

If there is a disc inside, take out the

disc.

Press [SRC]

(PWR) to select

the CD mode.

Hold down [PUSH SEL] for 4 sec. or

more to display the menu screen.

Load a CD-R/RW that contains data.

Notes:

¡ It may take time for the unit to identify the CD-

R/RW.

¡ Discs recorded by the packet writing software are

not supported.

Select an item to be customized.

[}][{]: Select

[BAND] (SET):Confirm

Note: To exit the customize menu, hold down

[PUSH SEL] 4 sec. or more.

GRAPHIC PATTERN

Moving image (graphic pattern) data (a page 35)

STILL IMAGE

Still image data (a page 35)

OPENING MESSAGE

Moving image at power on

CLOSING MESSAGE

Moving image at power off

Select a file.

[}][{][]][[]:Select

[BAND] (SET): Confirm

Notes:

¡ Files are automatically identified by their exten-

sions, and target files are displayed.

¡ If “BACK” is selected, the screen of step 5

appears.

For a moving image file or still image

file, select where to save the file.

[]][[][}][{]:Select

[BAND] (SET): Confirm

Notes:

¡ New data overwrites existing data.

¡ If “BACK” is selected, the screen of step 6

appears.

Confirm the changed item.

[]][[]: Select

[BAND] (SET):Confirm

Customization is performed. Do not turn off the

power in mid-operation. (It takes approx. 5 minutes

to complete this operation for a 548 kB moving

image.) After completion of this operation, the

screen of step 5 appears.

Note: If “NO” is selected, the screen of step 5

appears.

Press [OPEN] to eject the disc.

Hold down [PUSH SEL] for 4 sec. or

more.

The CD mode comes back.

DISP

PTY

CQ-C8803N

English

Customize the Display (Customize Function)

Notes on Customize Function

Note on Download Service

The download service may be suspended or stopped

without advance notice. The download service is not

available in some areas. Please visit the site below for

further information.

Panasonic Web site:

(http://www.panasonic.co.jp/global/)

Notes on IMAGE STUDIO

¡ This download service is not available in some areas.

For details, please access the Panasonic website.

¡ IMAGE STUDIO is available only by downloading from

the address below. It is not bundled with this unit.

¡ Refer to the downloaded operating manual for how to

use IMAGE STUDIO.

Notes on File

¡ The customize-specific file is downloadable from the

URL below. You can create exclusive files stored with

a digital camera or other devices by using exclusive

software, IMAGE STUDIO that can be accessed from

the same URL.

¡ Do not change the extension. Otherwise, the data can-

not be recognized.

At Disc Making

¡ Save only customize-specific data.

¡ Save all data in the root directory. Files contained in a

folder cannot be recognized.

¡ Follow the table below with regard to the number of

files that are saved to a disc. Files beyond the speci-

fied capacity are not readable.

¡ Discs recorded by the packet writing software are not

supported.

At Customizing

¡ If customizing is interrupted on account of turning off

the power, stopping the engine, removing the face

plate or other reasons, you may lose the data. In such

a case, try customizing again.

¡ The default image exists on the Panasonic Web site. If

you would like to restore it, download the image from

the site.

Error Display Messages

NO FILES DETECTED

No customize-specific data on the disc

a Load a disc that contains customize-specific

data.

CUSTOMIZING FAILED

Customize failed

a Check to see whether or not the extension is cor-

rect and file contents are appropriate.

DISPLAY FILE INCOMPLETE

Intended moving image or still image is damaged.

a Customize it again and overwrite the file with

new one.

Type Extension Max. number

GRAPHIC PATTERN .pfm 10

STILL IMAGE .pfs 15

OPENING MESSAGE .pfo 5

CLOSING MESSAGE .pfe 5

Download site:

http://panasonic.co.jp/pas/en/software/

customize/index.html

CQ-C8803N

Troubleshooting

If You Suspect Something Wrong

Check and take steps as described below.

If the described suggestions do not solve the problem, it is

recommended to take the unit to your nearest authorized Panasonic

Service Centre. The product should be serviced only by qualified

personnel. Please refer the checking and the repair to professionals.

Panasonic shall not be liable for any accidents arising out of neglect of

checking the unit or your own repair after your checking.

Never take measures especially those other than indicated by italic

letters in “Possible Solution” described below because those are too

dangerous for users to handle themselves.

Warning

¡ Do not use the unit in an irregular condition, for

example, without sound, or with smoke or a foul

smell, which can cause ignition or electric shock.

Immediately stop using the unit and consult your

dealer.

¡ Never try to repair the unit by yourself because it is

dangerous to do so.

Problem

Possible cause

Possible solution

Common

No power to the

unit

The power cord (battery, power and ground) is connected in the wrong way.

a Check the wiring.

Fuse blows out.

a Eliminate the cause of fuse blowout and replace the fuse with new one.

Consult your dealer.

Sound is not

generated.

MUTE is set to ON.

a Set MUTE to OFF.

The wiring of speaker lines are not correct, or a break or poor contact arises.

a Check the wiring in accordance with the wiring diagram. (Installation

Instructions)

Noise

There is an electromagnetic-wave generator such as a cellular phone near the unit or

its electrical lines.

a Keep an electromagnetic-wave generator such as a cellular phone away from

the unit and the wiring of the unit. In case that noise cannot be eliminated

due to the wiring harness of the car, consult your dealer.

The contact of the ground lead is poor.

a Make sure that the ground lead is connected to an unpainted part of the chas-

sis securely.

Noise is made in

step with engine

revolutions.

Alternator noise comes from the car.

a Change the wiring position of the ground lead.

a Mount a noise filter on the power supply.

CQ-C8803N

English

Troubleshooting

Common (continued)

Some operations

are not executable.

Some operations are not executable in particular modes such as menu mode.

a Read the operating instructions carefully and cancel the mode. If the unit is

still out of order, consult your dealer.

Problem

Possible cause

Possible solution

No sound from

speaker(s)

BALANCE/FADER setting is not appropriate.

a Readjust BALANCE/FADER.

There is a break, a short circuit, poor contact or wrong wiring regarding the speaker

wiring.

a Check the speaker wiring.

The speaker

channels are

reversed between

right and left.

The speaker wiring is confused between right and left.

a Perform the speaker wiring in accordance with the wiring diagram.

The sound field is

not clear in the

stereo mode.

Central sound does

not settled.

The plus and minus terminals at right and left channels of speakers are connected

reversely.

a Perform the speaker wiring in accordance with the wiring diagram.

Radio

Poor reception or

noise

Antenna installation or wiring of antenna cable is faulty.

a Check whether the antenna mounting position and its wiring are correct. In

addition, check to see whether the antenna ground is securely connected to

the chassis.

No power is supplied to the antenna amplifier (when using a film antenna, etc.).

a Check the wiring of the antenna battery lead.

The power fails

unintentionally.

The safety device works.

a Consult your dealer, or your nearest Panasonic Service Centre.

The number of auto

preset stations is

less than 6.

The number of receivable stations is less than 6.

a Move to an area where receivable stations number is maximum, and try pre-

setting.

Preset stations

cannot be stored.

The contact of the battery lead is poor, or the battery lead is not always powered.

Make sure that the battery lead is connected securely, and preset stations again.

FM Stereo broadcast

is received only in

mono.

The MONO mode is active.

a Cancel the MONO mode.

Only strong signal

stations can be

received.

The LOCAL mode is active.

a Cancel the LOCAL mode.

Troubleshooting

CQ-C8803N

Problem

Possible cause

Possible solution

RDS

PS does not appear

even if an RDS

station is tuned in to.

(“NO PS” appears.)

A PS code cannot be received for the reason of bad receiving conditions, etc.

a A PS code appears if it is received. Wait for a while until conditions change.

Receiving

programs differs

from PTY that was

already set up.

When the station changed between programs, the unit could not receive the PTY

code.

a An appropriate programme is searched for and tuned in to after receiving a

corresponding PTY code. Therefore, wait for a while.

“NONE” appears

when selecting

PTY.

Any specified PTY programs cannot be received. There is no desired programme

being broadcast in your area.

a Select another PTY, or wait until a desired programme starts.

The clock time (CT)

is not accurate.

The unit received a station broadcasting time that is not appropriate for you, or the

unit is receiving a station that does not broadcast time.

a Receive a station broadcasting time that is appropriate for your area, or

adjust CT manually.

An AF station

cannot be received

even if AF indicator

lights.

There is little difference in receiving conditions between the current station and AF

stations. Update of the AF list ended in failure.

a Wait until the AF list is successfully updated. For unstable reception, tune in

to a stable station by the hand.

Problem

Possible cause

Possible solution

No playback or

disc ejected

The disc is inserted upside down.

a Insert a disc correctly.

There is a flaw or foreign material on the disc.

a Remove the foreign material, or use a flawless disc.

Sound skipping or

noise

There is a flaw or foreign material on the disc.

a Remove the foreign material, or use a flawless disc.

Sound skipping

due to vibration

The unit is not sufficiently secured.

a Secure the unit to the console box.

The unit is tilted at over 30˚ in the front-to-end direction.

a Make the angle 30˚ or less.

Disc unejectable

Something such as a peeled label obstructs the disc coming out.

a Press and hold the [

] (OPEN) for more than 2 seconds when the face plate

is open (disc forced ejection). In case that the disc forced ejection does not

work, consult your dealer.

The microcontroller in the unit operates abnormally due to noise or other factors.

a Unplug the power cord and plug it again. In case the unit is still out of order,

consult your dealer.

The CD-R/RWs that

are playable on

other devices are

not playable on

this unit.

The playability of some CD-R/RWs may depend on the combination of media,

recording software and recorder to be used even if these CD-R/RWs are playable on

other devices such as a PC.

a Make CD-R/RWs in different combination of media, recording software and

recorder after referring to the description about MP3/WMA.

Sound skipping or

noise

There is a flaw or foreign material on the disc.

a Remove the foreign material, or use a flawless disc. For MP3/WMA, refer to

the description about MP3/WMA.

Playing VBR (Variable Bit Rate) files may cause sound skipping.

a Play Non-VBR files.

MP3/WMA

No playback or

disc ejected

The disc has unplayable formatted data.

a Refer to the description about MP3/WMA for playable sound data except CD-

DA (i.e. music CD).

English

CQ-C8803N

Troubleshooting

CQ-C8803N

Troubleshooting

Problem

Possible cause

Possible solution

Remote control unit

No response to

pressing buttons

The battery is inserted in the wrong direction. A wrong battery is inserted.

aInsert a correct battery in the correct direction.

The battery is weak.

aReplace the battery with new one.

The aiming direction of the remote control unit is wrong.

aAim the remote control unit at the sensor of the unit and press buttons.

The sensor is exposed to direct sunlight. (The remote control unit may not be

operable when the sensor is exposed to direct sunlight. In such a case, the

system is not faulty.)

aBlock off sunlight to the sensor.

CQ-C8803N

English

Troubleshooting, Error Display Messages

Error Display Messages

The player for some reason cannot read the file you are trying to play. (File recorded

in an unsupported file system, compression scheme, data format, file name exten-

sion, damaged data, etc.)

a Select a file that the player can read. Check the type of data recorded on the

disc. Create a new disc if necessary.

(After 5 seconds)

To next file automatically

CD/MP3/WMA

The disc is dirty, or is upside down.

a Check the disc.

The disc has scratches.

a Check the disc.

No operation by some cause.

a Unplug the power cord and plug it again. In case the unit is still out of order,

consult your dealer. (a Installation Instructions)

A WMA file can be copyrighted.

a The file protected by copyright is not playable.

No disc.

Display

Possible cause

Possible solution

Note: Refer to the System Upgrade Guidebook for error messages regarding optional products.

CQ-C8803N

Notes on Discs

How to hold the disc

¡ Do not touch the underside of the disc.

¡ Do not scratch on the disc.

¡ Do not bend the disc.

¡ When not in use, keep disc in the case.

Do not use irregularly shaped discs.

Do not leave discs in the following places:

¡ In direct sunlight

¡ Near car heaters

¡ Dirty, dusty and damp areas

¡ On seats and dashboards

Disc cleaning

Use a dry, soft cloth to wipe from the center outward.

Do not attach any seals or labels to your discs.

Do not write on the disc label with a ballpoint

pen or other hard-point pens.

If you use commercial CDs, they must have

either of these labels shown at right.

Some copy-protected music CDs are not

playable.

TEXT

¡ You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives), either due

to their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.

¡ CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them

inside a car for extended periods may damage and make playback impossible.

¡ Some CD-R/RWs can not be played back successfully thanks to incompatibility among writing software, a CD

recorder (CD-R/RW drive) and the discs.

¡ This player cannot play the CD-R/RW discs if the session is not closed.

¡ This player cannot play the CD-R/RW discs which contains other than CD-DA or MP3/WMA data.

¡ Be sure to observe the instructions of CD-R/RW disc for handling it.

Notes on CD/CD Media (CD-ROM, CD-R, CD-RW)

Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for

routine exterior cleaning. Never use benzine, thinner, or other solvents.

Notes on

CD-Rs/RWs

Maintenance

Cleaning the

Unit

Fuse

If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Centre.

Warning

¡Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the

unit directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your

nearest authorized Panasonic Service Centre.

Printed side

Irregularly shaped discs

Labels created by a printer

CQ-C8803N

Specifications

Notes on discs, Maintenance, Specifications

Notes:

¡Specifications and design are subject to modification without notice due to improvements.

¡Some figures and illustrations in this manual may be different from your product.

General

Sampling Frequency 8 times oversampling

DA Converter 4 DAC System

Pick-Up Type Astigma 3-beam

Light Source Semiconductor laser

Wavelength 790 nm

Frequency Response 20 Hz – 20 kHz (±1 dB)

Signal to Noise Ratio 96 dB

Total Harmonic Distortion

0.01 % (1 kHz)

Wow and Flutter Below measurable limits

Channel Separation 86 dB (2 V)

FM Stereo Radio

Frequency range 87.5 MHz – 108 MHz

Usable sensitivity 8 dB/µV (S/N 30 dB)

Frequency Response 30 Hz – 15 kHz (±3 dB)

Alternate channel selectivity

75 dB (IF: MID)

Stereo separation 40 dB (at 1 kHz)

Image response ratio 75 dB (IF: MID)

IF response ratio 100 dB (IF: MID)

Signal to noise ratio 62 dB

AM (MW) Radio

Frequency Range 531 kHz – 1 602 kHz

Usable Sensitivity 25 dB/µV (S/N 20 dB)

AM (LW) Radio

Frequency Range 153 kHz – 279 kHz

Usable Sensitivity 32 dB/µV (S/N 20 dB)

English

Power Supply DC 12 V (11 V – 16 V), Test Voltage 14.4 V, Negative Ground

Tone Controls (Bass/Treble)

Bass; ±12 dB at 80 Hz, Treble; ±12 dB at 6 kHz

Equalizer Center Frequency

62.5, 125, 250, 500, 1 k, 2 k, 4 k, 8 k, 16 k (default) (Hz)

Variable Range of Equalizer

12 dB to 12 dB (2 dB step)

Current Consumption Less than 2.5 A (CD mode, 0.5 W 4-Speaker)

Maximum Power Output

70 W x 4 (at 1 kHz)

Power Output

40 W x 4 (DIN 45 324,at 4 Ω)

Speaker Impedance 4 – 8 Ω

Pre-amp output voltage

5 V (CD mode, 1 kHz, 0

dB)

Subwoofer-output voltage

5 V (CD mode, 1 kHz, 0

dB)

Pre-amp output impedance

60 Ω

Subwoofer-output impedance

60 Ω

Dimensions (Main Unit)

178(W) x 50(H) x 155(D) mm

Weight (Main Unit) 1.7 kg

CD PlayerRadio

Sales and Support Information

For UK and Ireland customers only.

Customer Care Centre

¡ For customers within the UK: 08705 357357

¡ For customers within the Republic of Ireland: 01 289

8333

¡ Visit our website for product information

¡ E-mail: [email protected]

Direct Sales at Panasonic UK

¡ Order accessories and consumable items for your prod-

uct with ease and confidence by phoning our Customer

Care Centre Monday - Thursday 9:00am - 5:30pm, Friday

9:30am - 5:30pm. (Excluding public holidays).

¡ Or go on line through our Internet Accessory ordering

application at www.panasonic.co.uk.

¡ Most major credit and debit cards accepted.

¡ All enquiries, transactions and distribution facilities are

provided directly by Panasonic UK Ltd.

¡ It couldn't be simpler!

¡ Also available through our Internet is direct shopping for

a wide range of finished products, so take a browse on

our website for further details.

YEFM285767A NY0206-1026 Printed in China

Matsushita Electric Industrial Co., Ltd.

Web Site : http://www.panasonic.co.jp/global/

30°

53 mm

182 mm

4.5 mm – 6.0 mm

●

Please read these instructions carefully before using this product and keep this manual for future reference.

●

Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren

Sie sie danach für spätere Nachschlagzwecke sorgfältig auf.

●

Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.

●

Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.

Matsushita Electric Industrial Co., Ltd.

Web Site : http://www.panasonic.co.jp/global/

Consult a professional for installation.

●Verify the radio using the antenna and speakers before installation.

Wenden Sie sich zum Einbau an einen Fachmann.

●Probieren Sie den Radiobetrieb vor dem Einbau mit Antenne

und Lautsprechern aus.

Prenez contact avec un spécialiste pour le montage.

●Vérifiez l’autoradio avant de procéder au montage.

Vraag een vakman voor de installatie.

●Controleer voor de installatie of de radio werkt met de antenne en

de luidsprekers.

●Mounting angle side to side : horizontal

front to rear : 0 - 30°

●Montagewinkel seitlich : horizontal

vorne-hinten : 0 - 30°

●Angle de montage latéral : horizontal

longitudinal : 0 - 30°

●Bevestigingshoek links/rechts : horizontaal

voor/achter : 0 - 30°

●Mounting space

●Einbauöffnung

●Espace nécessaire pour le montage

●Benodigde ruimte

Before Installation/Vor dem Einbau/

Avant l'installation/Voor de installatie

Before Wiring/Vor der Verdrahtung/

Avant le câblage/Voor het aansluiten van de bedrading

How to install the unit/Einbau des Gerätes/Mode de montage de l’appareil/Installeren van het toestel

Supplied Hardware/Mitgelieferte Hardware/Matériel d’installation/Meegeleverde onderdelen

Installation/Einbau/Montage/Installatie

Mounting collar q insertion

Bend mounting tabs.

Einsetzen der Einbauhalterung q

Biegen Sie die Einbaulaschen ab.

Insertion du cadre de montage

Replier les languettes de fixation.

Inbrengen bevestigingskraag q

Buig bevestigingslipjes om.

Connection of power connector e

Anschluss des Versorgungssteckers

Raccordement du connecteur d'alimentation e

Aansluiten van de stroomstekker e

Trim plate r mounting

Anbringen der Abdeckplatte r

Installation de la plaque de garniture

Bevestigen van de afwerkingsrand

Battery Cable reconnection

Wiederanschließen des Kabels

Rebranchement du câble

Opnieuw aansluiten kabel

Remove the face plate.

Nehmen Sie das

Bedienteil ab.

Retirer le plaque de

façade.

Verwijder de voorplaat.

Remove the trim plate r.

Entfernen Sie die

Abdeckplatte r.

Enlevez la plaque de

garniture r.

Verwijder de

afwerkingsrand r.

Pull out the unit with

both hands.

Ziehen Sie das Gerät mit

beiden Händen heraus.

Retirez l’appareil à deux

mains.

Trek het toestel met beide

handen naar buiten.

How to remove the unit/Ausbau des Gerätes/

Dépose de l’appareil/Verwijderen van het toestel

Caution

● Wear gloves for safety.

●

Make sure that wiring is completed

before installation.

Vorsicht

● Tragen Sie Handschuhe, um sich

vor Verletzungen zu schützen.

●

Achten Sie vor dem Einbau darauf,

dass die Verdrahtung fertiggestellt ist.

Attention

● Porter des gants à des fins de sécurité.

●

S'assurer que le câblage est terminé avant

l'installation.

Let op

● Draag handschoenen voor uw veiligheid.

●

Controleer of de bedrading correct is aangelegd

voor u gaat installeren.

Remove the cable from the battery negative terminal.

Trennen Sie das Kabel von der negativen Batterieklemme ab.

Retirer le câble de la borne négative de la batterie.

Koppel de kabel van de negatieve aansluiting van de accu los.

Bend appropriate tabs to secure the unit

without backlash.

Die entsprechenden Einbaulaschen so

umbiegen, dass das Gerät ohne Spielraum

fest sitzt.

Replier les languettes

de fixation appropriées

pour immobiliser

l'appareil sans

contrecoup.

Buig de juiste lipjes om

zodat het toestel vast

zit zonder speling.

q Screw the mounting bolt w into the main unit.

w Securing to the fire wall.

Snap the right and left springs into each hole.

q Schrauben Sie die Befestigungsschraube w

in das Hauptgerät.

w An der Feuerschutzwand sichern.

Lassen Sie die rechten und linken Federn in den

Löchern einschnappen.

q Visser le boulon de fixation w dans l'appareil

principal.

w Saisissage du pare-feu.

Bouteroller les ressorts droit et gauche dans chaque trou.

Draai de bevestigingsbout w in het hoofdtoestel.

w Vastzetten aan het brandschot.

e Zet de achterkant van het hoofdtoestel vast.

Securing to the fire wall

Befestigung an Brandschutzwand

Obtenir un pare-feu

Vastzetten aan het brandschot

Using the rear support strap (Option)

Using the Rubber bushing (Option)

Verwendung der Einbauleiste (Option) Verwendung der Gummibuchse (Option)

Utiliser de la barrette de support arrière (en option)

Utiliser la bague d'amortisseur en caoutchouc (en option)

Gebruik van de achter-steunstrip (

optioneel

)

Gebruik van het rubber stootkussen (optioneel)

3 mm Tapping Screw (Option)

Blechschraube (Option)

Vis taraudeuse (en option)

Zelftappende schroef

(optioneel)

To the unit

An das Gerät

Côté appareil

Naar het toestel

Rear Support Strap (Option)

Hinterer Stützstreifen

(Option)

Barrette d'appui arrière (en option)

Steunstrip achter (optioneel)

Hexagonal nut (Option)

Sechskantmutter (Option)

Ecrou hexagonal (en option)

Zeskantige moer (optioneel)

Rear Support Bracket

(supplied with car)

Einbauleiste (vorhanden im

Fahrzeug)

Support arrière

(fourni avec votre voiture)

Achter-steunbeugel

(behorend bij de auto)

Rubber Bushing (Option)

Gummibuchse (Option)

Bague en caoutchouc (en option)

Rubber stootkussen (optioneel)

To the unit

An das Gerät

Côté appareil

Naar het toestel

EnglishDeutschFrançaisNederlands

Installation Instructions

Einbauanleitung

Instructions d’installation

Installatiehandleiding

Installation Instructions

Einbauanleitung

Instructions d’installation

Installatiehandleiding

Caution

When this unit is installed in dashboard,

ensure that there is sufficient air flow

around the unit to prevent damage from

overheating, do not block any ventilation

holes on the unit.

Vorsicht

Bei Einbau des Geräts im Armaturenbrett

sollte darauf geachtet werden, dass der

Luftstrom um das Gerät nicht behindert ist,

um Beschädigung durch Überhitzen zu

verhindern, und die Belüftungsöffnungen

des Geräts nicht blockiert sind.

Attention

Lorsque cet appareil est installé dans le

tableau de bord, assurez-vous qu'il y a une

circulation d'air suffisante autour de

l'appareil afin d'éviter tout endommagement

provoqué par une surchauffe et qu'aucun

trou d'aération de l'appareil n'est obturé.

Let op

Wanneer dit toestel in het dashboard wordt

geïnstalleerd, moet u ervoor zorgen dat er

voldoende ventilatie is rond het toestel. Om

oververhitting te voorkomen mogen de

ventilatie-openingen in het toestel niet

afgedekt worden.

Remove Mounting Collar q and Trim Plate r from the main

unit temporarily, which are already mounted at shipment.

Die bei der Lieferung montierte Einbauhalterung q und

Abdeckplatte r vorübergehend vom Gerät abmontieren.

Démontez provisoirement le cadre de montage q et la

plaque de garniture r de l’appareil principal, qui sont déjà

mis en place lors de l’expédition.

Verwijder de Bevestigingskraag q en de Afwerkingsrand r,

die bij het verlaten van de fabriek gemonteerd zijn,

tijdelijk van het hoofdtoestel.

Snapping point

Einschnapppunkt

Position de rupture

Breekpunt

Mounting Bolt w

Befestigungsschraube

Boulon de fixation w

Bevestigingsbout w

Mounting Bolt w

Befestigungsschraube

Boulon de fixation w

Bevestigingsbout w

Lock release

q Insert the lock cancel plate

y until you hear a click.

w Pull the main unit.

Verriegelungsfreigabe

Setzen Sie die

Verriegelungsfreigabeplatte

ein, bis Sie ein Klickgeräusch

vernehmen können.

Ziehen Sie an dem Hauptgerät.

Libération du verrouillage

q Introduisez la plaque anti-

blocage y jusqu’à entendre

un clic.

Dégager l'appareil principal

Ontgrendeling

q Steek de

ontgrendelingsplaat y naar

binnen tot u een klik hoort.

w Trek het hoofdtoestel naar

buiten.

Exclusively operated with 12 V battery with negative (–) ground.

Connect the power lead (red) very last.

(for non-ISO connector)

Connect the battery lead (yellow) to the positive (+) terminal of

the battery or fuse block terminal (BAT).

(for non-ISO connector)

Strip about 5 mm of the lead ends for connection.

(for non-ISO connector)

Apply insulating tape to bare leads.

Secure loosened leads.

Dieses Gerät ist ausschließlich für den Anschluss

an Bordnetze mit 12 V Batterie und negativer (–) Klemme

an Masse bestimmt.

Schließen Sie den Versorgungsleiter (rot) zum Schluss an.

(wenn kein ISO-Stecker verwendet wird)

Schließen Sie das Batteriekabel (gelb) an die positive (+)

Klemme der Batterie oder an die (BAT) Klemme des

Sicherungsblocks an.

(wenn kein ISO-Stecker verwendet wird)

Entfernen Sie etwa 5 mm der Isolierung von den Kabelenden

für den Anschluss.

(wenn kein ISO-Stecker verwendet wird)

Isolieren Sie alle freiliegenden Leiter.

Sichern Sie alle losen Leiter.

Alimentez l’appareil absolument par la batterie de 12 V avec

sa polarité négative (–) mise à la masse.

Raccorder le fil d'alimentation (rouge) en dernier.

(pour un connecteur non-ISO)

Connectez le fil (jaune) à la borne positive (+) de la batterie ou

à la borne (BAT) de la boîte à fusibles.

(pour un connecteur non-ISO)

Dénudez les extrémités de fil de 5 mm environ pour la connexion

(pour un connecteur non-ISO)

Recouvrez les fils nus d’un ruban isolant.

Resserrez les connexions de fils.

Uitsluitend voor gebruik met een 12 V accusysteem

met negatieve (–) aarding.

Sluit de stroomdraad (rood) pas het allerlaatst aan.

(voor een niet-ISO aansluiting)

Sluit de accudraad (geel) aan op de positieve (+) aansluiting van de

accu of van het zekeringenblok (BAT).

(voor een niet-ISO aansluiting)

Strip ongeveer 5 mm van de uiteinden van de draden om de

verbinding tot stand te kunnen brengen

. (voor een niet-ISO aansluiting)

Isoleer blote draadeinden met isolatieband.

Zet loshangende draden vast.

Clank!

Fixation de l'appareil

principal

Vastzetten hoofdtoestel

Befestigung des

Hauptgerätes

Main unit securing

No. Diagram

Q’ty

Item No. Diagram

Q’ty

Item

Mounting Collar

Einbauhalterung

Cadre de montage

Bevestigingskraag

Mounting Bolt (5 mmø)

Befestigungsschraube (5 mmø)

Boulon de fixation (5 mmø)

Bevestigingsbout (5 mmø)

ISO Antenna Adapter

ISO-Antennenadapter

Adaptateur d’antenne ISO

ISO antenne-adapter

Lock Cancel Plate

Verriegelungsfreigabeplatte

Plaque anti-blocage

Ontgrendelingsplaat

Power Connector

Versorgungsstecker

Connecteur d’alimentation

Stroomstekker

Trim Plate

Abdeckplatte

Plaque de garniture

Afwerkingsrand

YEFX0217314

YGAJ021010

w, t and y consist of a set. (YEP0FZ5740) w, t und y bestehen als Satz. (YEP0FZ5740)

w, t et y constituent un jeu. (YEP0FZ5740) w, t en y bestaan uit een set. (YEP0FZ5740)

WMA MP3 CD Player/Receiver

Model: CQ-C8803N

YEFM294131A NY0206-1026 Printed in China

YEFC051013

TEXT

CQ-C8803N

DISP

PTY

D M

ACC

BATTERY 15A

(❈)

ACC

BATTERY 15A

ACC

BATTERY 15A

DC/DC Converter

Gleichspannungswandler

Convertisseur CC/CC

DC-DC convertereenheid

Secure the converter with screws and so forth.

Keep some distance between RCA Cords and the antenna lead.

Den Wandler mit Schrauben usw. befestigen.

Etwas Abstand zwischen den RCA-Leitungen und der Antennenleitung vorsehen.

Fixez le convertisseur avec des vis ou un autre moyen appropri

Gardez une certaine distance entre les cordons RCA et le fil d’antenne.

Zet de converter vast met schroeven en wat dies meer zij.

Houd de RCA (tulpstekker) snoeren en de antennedraad bij elkaar uit de buurt.

(❈)

CX-DP880N

CQ-C8803N

System Upgrade Example: Connecting with the CD changer/Beispiel für ein System-Upgrade: Anschluss an den CD-Wechsler

/Exemple de mise à niveau de système: Raccordement à un changeur de disque CD/Voorbeeld systeemuitbreiding: Aansluiten van een CD-wisselaar

CA-CC30N

(Optional)(Option)(en option)(Optioneel)

(Optional)

(Option)

(en option)

(Optioneel)

(

)/(

)/(G)/(L)

(White)/(Weiß)/(Blanc)/(Wit)

(

)/(

)/(D)/(

)

(Red)/(Rot)/(Rouge)/(Rood)

DIN Cord

DIN-Kabel

Cordon DIN

DIN snoer

RCA Cord

Cinchkabel

Cordon RCA

RCA (tulpstekker) snoer

Ground Lead

Massekabel

Fil de mise à la masse

Aarding

Battery Lead

Batteriekabel

Fil de batterie

Accudraad

Conversion Cable for DVD/CD Changer

Umwandlungskabel für DVD/CD-Wechsler

Câble de conversion de changeur DVD/CD

Conversiekabel voor DVD/CD-wisselaar

System-up

Connector

System-Upgrade-

Stecker

Connecteur de mise

à niveau de système

Systeemuit-

breidingsaansluiting

CHANGER IN

PRE-OUT REAR

PRE-OUT FRONT

AUX1-IN

W-OUT

ACC

BATTERY 15A

ISO Antenna Adapter

(

If needed

)

ISO-Antennenadapter

(falls erfor derlich)

Adaptateur d'antenne ISO

(si nécessaire)

ISO antenne-adapter (Indien nodig)

Wiring/Verdrahtung/Câblage/Bedrading

Caution

To prevent damage to the unit, do not connect the power connector until the whole

wiring is completed.

Vorsicht

Um Beschädigung des Gerätes zu vermeiden, schließen Sie den Versorgungsstecker

erst an, nachdem die gesamte Verdrahtung vollständig beendet wurde.

Attention

Ne pas introduire la prise d'alimentation secteur dans l'appareil tant que le câblage n'est

pas complètement terminé afin de ne pas risquer d'endommager l'appareil.

Let op

Om schade aan het toestel te voorkomen mag u de stroomstekker pas aansluiten

wanneer de bedrading volledig is aangesloten.

Antenna

Antenne

Fuse (15 A) Refer fuse replacement to your nearest authorized Panasonic Service Centre. Do

not try fuse replacement by yourself.

Sicherung (15 A)

Wenden Sie sich zum Austausch der Sicherung an eine autorisierte Panasonic-

Kundendienststelle in Ihrer Nähe. Versuchen Sie nicht, den Austausch selbst vorzunehmen.

Fusible (15 A) Confier le remplacement de fusible au centre de service de service après-vente

Panasonic agréé le plus proche. Ne pas essayer de remplacer le fusible tout(e) seul(e).

Zekering (15 A) Laat het vervangen van de zekering over aan uw dichtstbijzijnde Panasonic

service-centrum. Probeer in geen geval zelf de zekering te vervangen.

(

)/(

)/(D)/(

)

(Red)/(Rot)/(Rouge)/(Rood)

(

)/(

)/(G)/(L)

(White)/(Weiß)/(Blanc)/(Wit)

(

)/(

)/(D)/(

)

(Red)/(Rot)/(Rouge)/(Rood)

(

)/(

)/(G)/(L)

(White)/(Weiß)/(Blanc)/(Wit)

(

)/(

)/(D)/(

)

(Red)/(Rot)/(Rouge)/(Rood)

(

)/(

)/(G)/(L)

(White)/(Weiß)/(Blanc)/(Wit)

(

)/(

)/(D)/(

)

(Red)/(Rot)/(Rouge)/(Rood)

(

)/(

)/(G)/(L)

(White)/(Weiß)/(Blanc)/(Wit)

Preamp Out Connector

(

Rear

)

Vorverstärker-Ausgang (Rückseite)

Connecteur de sortie de préamplificateur (arrière)

Uitgangsaansluiting voorversterker (achter)

AUX Input Connector

AUX-Eingangsstecker

Connecteur d'entrée AUX

AUX-ingangsaansluiting

Preamp Out Connector

(

Front

)

Vorverstärker-Ausgang (Vorderseite)

Connecteur de sortie de préamplificateur (avant)

Uitgangsaansluiting voorversterker (voor)

Subwoofer Output Connector

The RCA cord of an external power amplifer should be

connected.

Subwoofer-Ausgangsstecker

Hier das RCA-Kabel eines externen Leistungsverstärkers

anschließen.

Connecteur de sortie du haut-parleur des extrêmes-graves

Le cordon RCA d’un amplificateur de puissance extérieur

doit être raccordé.

Subwoofer uitgangsaansluiting

Hierop kunt u via een RCA (tulpstekker) snoer een externe

eindversterker aansluiten.

System-up Connector

System-Upgrade-Stecker

Connecteur de mise à niveau de système

Systeemuitbreidingsaansluiting

C1 :

External Mute Lead

To the Navi Mute lead of the Panasonic car navigation system

or car telephone mute lead.

Externe-Stummschaltungskabel

An das Navigationssystem-Stummschaltungskabel des

Panasonic Navigationssystems oder an das

Autotelefon-Stummschaltungskabel.

Fil de Mise en sourdine extérieure

A raccorder au fil Navi Mute du système de navigation automobile de

Panasonic ou au fil de mise en sourdine du téléphone pour véhicule.

Externe-geluiddempingsdraad

Naar de Navi Mute draad van een Panasonic auto-navigatiesysteem

of naar de dempingsdraad voor deautotelefoon.

C3 :

ISO Connector

ISO-Stecker

Connecteur ISO

ISO aansluiting

Power Lead

(

ACC or IGN

)

To ACC power, +12 V DC.

Versorgungskabel (ACC oder IGN)

An die ACC-Stromklemme, +12 V Gleichspannung.

Fil d’alimentation (ACC ou IGN) A l’alimentation ACC, +12 V CC.

Stroomdraad (ACC of IGN) Naar ACC stroomvoorziening, + 12 V gelijkstroom.

Ground Lead To a clean, bare metallic part of the car chassis.

Massekabel An ein sauberes, metallisches Teil des Fahrzeugchassis.

Fil de mise à la masse A une partie métallique propre découverte du châssis de voiture.

Aarding Naar een schoon, bloot metalen onderdeel van het chassis.

Battery Lead To the car battery, continuous +12 V DC.

Batteriekabel An die Batterie des Fahrzeuges, kontinuierlich +12 V Gleichspannung.

Fil de batterie A la batterie de voiture, alimentation continue de +12 V CC.

Accudraad

Naar de accu van de auto, doorlopende stroomvoorziening + 12 V gelijkstroom

(Orange)/(Orange)/(Orange)/(Oranje)

(Red)/(Rot)/(Rouge)/(Rood)

(Black)/(Schwarz)/(Noir)/(Zwart)

(Yellow)/(Gelb)/(Jaune)/(Geel)

Motor Antenna Relay Control Lead To Motor Antenna. (Max. 100 mA) (This lead is not

intended for use with a switch actuated power antenna)

Steuerkabel für Relais der motorbetriebenen Antenne Zu motorbetriebenen Antenne

(max. 100 mA) (Dieses Kabel dient nicht für die Verwendung mit einer über einen

Schalter aktivierten motorbetriebenen Antenne.)

Fil de commande de relais d’antenne motorisée A l’antenne motorisée (100 mA maxi.)

(Ce fil n’est pas conçu pour l’usage avec l’antenne commandée par interrupteur.)

Stuurdraad relais gemotoriseerde antenne Naar de gemotoriseerde antenne. (Max. 100

mA) (Deze draad is niet bedoeld voor een gemotoriseerde antenne die met een

schakelaar wordt ingeschakeld.)

(Blue)/(Blau)/(Bleu)/(Blauw)

(Brown w/black stripe)/(Braun mit schwarzem Streifen)/(Brun à rayures noires)/

(Bruin met zwarte streep)

External Remote Control Lead

When using a non-Panasonic external remote control, refer to the manufacture for their

product before connecting.

Leitungsdraht für externe Fernbedienung

Wenn Sie eine externe Fernbedienung verwenden, die nicht von Panasonic hergestellt

wurde, wenden Sie sich vor dem Anschluss an den Hersteller des Produktes.

Fil de la télécommande extérieure

En cas d’utilisation d’une télécommande extérieure non-Panasonic, se référer aux

conseils du fabricant concerné pour les connexions électriques.

Externe afstandsbedieningsdraad

Bij gebruik van een externe afstandsbediening die niet van Panasonic is, dient u voor

aansluiting de handleiding of de fabrikant van het product in kwestie te raadplegen.

C4 :

(Blue w/white stripe)/(Blau mit weißem Streifen)/(Bleu à rayures blanches)/(Blauw met witte streep)

Amp·Relay Control Power Lead To Panasonic power amplifier.

(Max. 100 mA)

(synchronized with the power on/off of amplifier)

Stromversorgungskabel für Verstärkerrelaissteuerung an den Panasonic Leistungsverstärker. (Max. 100 mA) (synchronisiert mit dem Ein/Ausschalten der

Stromversorgung des Verstärkers)

Fil d'alimentation de commande de relais d'amplificateur à amplificateur de puissance Panasonic. (Max. 100 mA) (synchronisé à l'application ou la coupure

d'alimentation de l'amplificateur)

Versterker-relais Stuurstroomdraad naar Panasonic eindversterker. (Max. 100 mA) (gesynchroniseerd met de eindversterker aan/uit)

A7 :

A8 :

A4 :

A5 :

B7 :

Rear Left + (Green)

Hinten Links + (Grün)

Arrière gauche + (Vert)

Links achter + (Groen)

B5 :

Front Left + (White)

Vorne Links + (Weiß)

Avant gauche + (Blanc)

Links voor + (Wit)

B3 :

Front Right + (Gray)

Vorne Rechts + (Grau)

Avant droit + (Gris)

Rechts voor + (Grijs)

B1 :

Rear Right + (Violet)

Hinten Rechts + (Violett)

Arrière droit + (Violet)

Rechts achter + (Paars)

B2 :

Rear Right – (Violet w/black stripe)

Hinten Rechts – (Violett mit schwarzem Streifen)

Arrière droit – (Violet à rayures noires)

Rechts achter – (Paars met zwarte streep)

B4 :

Front Right – (Gray w/black stripe)

Vorne Rechts – (Grau mit schwarzem Streifen)

Avant droit – (Gris à rayures noires)

Rechts voor – (Grijs met zwarte streep)

B6 :

Front Left – (White w/black stripe)

Vorne Links – (Weiß mit schwarzem Streifen)

Avant gauche – (Blanc à rayures noires)

Links voor – (Wit met zwarte streep)

ISO Connector

ISO-Stecker

Connecteur ISO

ISO aansluiting

B8 :

Rear Left – (Green w/black stripe)

Hinten Links – (Grün mit schwarzem Streifen)

Arrière gauche – (Vert à rayures noires)

Links achter – (Groen met zwarte streep)

A4 A7

●The pin arrangement of the power connector

conforms to ISO standard.

●Please check that the pin arrangement of the

connector in your car conforms to ISO standard.

●For car types A and B, change the wiring of the

red and yellow leads as shown at below.

●After connection, insulate the portions marked (❈)

with insulating tape.

Note: For cars other than types A and B, please

consult your local car shop.

Precautions

(

ISO Connector

)

●Die Stiftbelegung des Versorgungssteckers entspricht

dem ISO-Standard.

●Bitte stellen Sie sicher, dass die Stiftbelegung

des Steckers in Ihrem Fahrzeug dem ISO-Standard

entspricht.

●Für Fahrzeuge der Typen A und B, ändern Sie die

Verdrahtung der roten und gelben Leiter gemäß Abbildung.

●Nach dem Anschluss isolieren Sie die mit (❈) markierten

Abschnitte mit Isolierband.

Hinweis: Für andere Fahrzeuge als Typ A und B,

wenden Sie sich bitte an eine örtliche Pkw-Werkstatt.

Vorsichtsmaßregeln (ISO-Stecker)

●La disposition des broches du connecteur d'alimentation

est conforme à la norme ISO.

●Veuillez vérifier si que la disposition des broches du

connecteur d'alimentation dans votre voiture est conforme

à la norme ISO.

●Pour les types de voiture A et B, changer le câblage des

fils rouge et jaune comme indiqué ci-dessous.

●Après avoir fait les connexions, isoler les sections

marquées (❈) avec de la bande isolante.

Remarque: Pour les voitures autres que des types A et B,

veuillez consulter votre magasin de matériel automobile local.

Précautions (Connecteur ISO)

●De pen-configuratie van de stroomstekker voldoet aan de

ISO standaard.

●Controleer of de pen-configuratie van de stekker in uw

auto eveneens voldoet aan de ISO standaard.

●

Voor auto's van type A en B, dient u de bedrading voor de rode

en gele draden te wijzigen zoals hieronder staat aangegeven.

●Na het aansluiten dient u de gedeelten die met (❈)

gemarkeerd zijn met isolatieband af te plakken.

Opmerking: Voor andere auto's dan die van type A en B

dient u uw garage te raadplegen.

Voorzorgen (ISO stekker)

Standard ISO/ISO-Standard/Normes ISO/Standaard ISO

IGN or ACC 12 V supply

12 V-Versorgung

(IGN/ACC)

Alimentation 12 V en

IGN ou ACC

IGN of ACC 12 V

stroomvoorziening

Car-side connector

Steckverbinder am Fahrzeug

Connecteur côté voiture

Stekker aan autozijde

Car-side connector

Steckverbinder am Fahrzeug

Connecteur côté voiture

Stekker aan autozijde

Car-side connector

Steckverbinder am Fahrzeug

Connecteur côté voiture

Stekker aan autozijde

12 V Batteries (Continuous supply)

12 V-Batterie (Dauerversorgung)

Batterie de 12 V (alimentation continue)

12 V accu (doorlopende stroomvoorziening)

Car Type A/Kraftfahrzeug des Typs A/Type de voiture A/Autotype A

Car Type B/Kraftfahrzeug des Typs B/Type de voiture B/Autotype B

IGN or ACC 12 V supply

12 V-Versorgung

(IGN/ACC)

Alimentation 12 V en

IGN ou ACC

IGN of ACC 12 V

stroomvoorziening

12 V Batteries (Continuous supply)

12 V-Batterie (Dauerversorgung)

Batterie de 12 V (alimentation continue)

12 V accu (doorlopende stroomvoorziening)

No connection

Kein Anschluss

Aucune connexion

Geen aansluiting

12 V Batteries (Continuous supply)

12 V-Batterie (Dauerversorgung)

Batterie de 12 V (alimentation continue)

12 V accu (doorlopende stroomvoorziening)

Power connector/Versorgungsstecker/Connecteur d’alimentation/Stroomstekker

Connect as follows.

Nehmen Sie den Anschluss wie folgt vor.

Branchez les haut-parleurs comme suit.

Sluit de luidsprekers als volgt aan.

Speaker Connection/Anschluss der Lautsprecher/Branchement avec les haut-parleurs/Aansluiten van de luidsprekers

●Do not use a 3-wire type speaker system

having a common earth lead.

●Verwenden Sie niemals Lautsprechersysteme mit

Dreierverkabelung, die einen gemeinsamen

Erdungsleiter aufweist.

●Ne pas utiliser pas de système de haut-parleur

de type à 3 fils ayant un fil de mise à la masse

commun.

●Gebruik geen luidsprekersysteem met drie

draden en een gedeelde aarddraad.

Caution

●Do not connect more than one speaker to one set of

speaker leads. (except for connecting to

a tweeter)

Vorsicht

●Schließen Sie niemals mehr als einen Lautsprecher

an einen Satz Lautsprecherleiter an. (außer bei

Anschluss eines Hochtonlautsprechers)

Attention

●Ne raccorder pas plus d'un haut-parleur à un

ensemble de fils de haut-parleur. (Sauf lors du

raccordement à un tweeter)

Let op

●Sluit niet meer dan één luidspreker aan op één paar

luidsprekerdraden. (Behalve bij aansluiting op een

tweeter.)

●Use ungrounded speakers only.

Allowable input : 70 W or more

Impedance : 4 – 8 Ω

●Distance between speaker and amplifier: 30 cm or more

●Verwenden Sie nicht geerdete Lautsprecher.

Zulässige Belastbarkeit: 70 W oder mehr

Impedanz : 4 – 8 Ω

●Entfernung zwischen Lautsprecher und Verstärker: 30 cm oder mehr

●Utilisez uniquement des haut-parleurs non reliés à la masse.

Puissance d'entrée admissible: 70 W ou davantage

Impédance: 4 – 8 Ω

●Distance entre le haut-parleur et l'amplificateur: 30 cm ou davantage

●Gebruik uitsluitend ongeaarde luidsprekers.

Toegestaan ingangsvermogen: 70 W of hoger

Impedantie: 4 – 8 Ω

●Afstand tussen luidspreker en versterker: 30 cm of meer

Panasonic cq-c8803 de handleiding

Merk: Panasonic

Model: cq-c8803

Categorie: Auto media-ontvangers

Type: de handleiding

Deze handleiding is ook geschikt voor

CQC8803N

PDF downloaden

rapport

in andere talen

English: Panasonic cq-c8803 Owner's manual

Panasonic cq-c8803 de handleiding

Deze handleiding is ook geschikt voor

Panasonic cq-c8803 de handleiding

in andere talen

Gerelateerde papieren

Andere documenten