Zanussi ZDSN653X ORBITCLEAN de handleiding

Categorie
Vaatwassers
Type
de handleiding

Deze handleiding is ook geschikt voor

GETTING
STARTED?
EASY.
User Manual
ZDSN653X1
NL Gebruiksaanwijzing 2
Afwasautomaat
EN User Manual 22
Dishwasher
GA NAAR ONZE WEBSITE VOOR:
Advies over gebruik, brochures, het oplossen van problemen, service- en reparatie-informa-
tie:
www.zanussi.com/support
VEILIGHEIDSINFORMATIE
Lees zorgvuldig de meegeleverde instructies voor installatie en
gebruik van het apparaat. De fabrikant is niet verantwoordelijk
voor verwondingen of schade die voortvloeit uit de onjuiste
installatie of het onjuiste gebruik. Bewaar de instructies altijd op
een veilige, toegankelijke plek voor toekomstig gebruik.
VEILIGHEID VAN KINDEREN EN KWETSBARE
MENSEN
Dit apparaat kan worden gebruikt door kinderen van 8 jaar en
ouder en door mensen met beperkte lichamelijke, zintuiglijke of
verstandelijke vermogens of een gebrek aan ervaring en kennis,
indien zij onder toezicht staan of instructies hebben gekregen
over het veilig gebruiken van het apparaat en indien zij de
eventuele gevaren begrijpen.
Kinderen tussen de 3 en 8 jaar oud en personen met zware en
complexe beperkingen dienen altijd uit de buurt van het
apparaat te worden gehouden, tenzij ze voortdurend onder
toezicht staan.
Kinderen jonger dan 3 jaar dienen, mits zij voortdurend onder
toezicht staan, bij het apparaat uit de buurt te worden
gehouden.
Laat kinderen niet met het apparaat spelen.
Houd reinigingsmiddelen uit de buurt van kinderen.
Houd kinderen en huisdieren uit de buurt van het apparaat als
de deur open is.
Kinderen mogen zonder toezicht geen reinigings- en
onderhoudswerkzaamheden aan het apparaat uitvoeren.
ALGEMENE VEILIGHEID
Dit apparaat is bedoeld voor gebruik in huishoudelijke en
soortgelijke toepassingen, zoals:
2
boerderijen; personeelskeukens in winkels, kantoren of
andere werkomgevingen;
door gasten in hotels, motels, bed&breakfasts- en andere
woonomgevingen.
De specificatie van dit apparaat niet wijzigen.
De waterdruk (minimaal en maximaal) moet liggen tussen 0.5
(0.05) / 8 (0.8) bar (MPa)
Volg het maximale aantal 13 plaatsen.
Als de voedingskabel beschadigd is, moet de fabrikant, een
erkende serviceverlener of een gekwalificeerd persoon deze
vervangen teneinde gevaarlijke situaties te voorkomen.
Leg het bestek in de besteklade met de scherpe randen naar
beneden of leg ze horizontaal in de besteklade met de scherpe
randen naar beneden.
Laat om ongelukken te voorkomen het apparaat niet onbeheerd
achter met open deur.
Schakel het apparaat uit en trek de stekker uit het stopcontact
voordat u onderhoudshandelingen verricht.
Gebruik geen waterstralen onder druk en/of stoom om het
apparaat te reinigen.
Als het apparaat is voorzien van ventilatieopeningen in de basis,
mogen deze niet worden afgedekt met bijv. een vloerkleed.
Het apparaat moet met de nieuwe slangset worden
aangesloten op een kraan. Oude slangsets mogen niet
opnieuw worden gebruikt.
VEILIGHEIDSVOORSCHRIFTEN
INSTALLATIE
WAARSCHUWING! Alleen een
erkende installatietechnicus mag het
apparaat installeren.
Verwijder alle verpakkingsmaterialen.
Installeer en gebruik geen beschadigd apparaat.
Gebruik het apparaat niet voordat u het in de
ingebouwde structuur installeert omwille van
veiligheidsredenen.
Volg de installatie-instructies die zijn
meegeleverd met het apparaat.
Pas altijd op bij verplaatsing van het apparaat,
want het is zwaar. Gebruik altijd
veiligheidshandschoenen en gesloten schoeisel.
Installeer of gebruik het apparaat niet op een
plek waar de temperatuur onder de 0 °C komt.
Installeer het apparaat op een veilige en
geschikte plaats die aan alle installatie-eisen
voldoet.
ELEKTRISCHE AANSLUITING
WAARSCHUWING! Gevaar voor
brand en elektrische schokken.
3
Dit apparaat moet worden aangesloten op een
geaard stopcontact.
Zorg ervoor dat de parameters op het
vermogensplaatje overeenkomen met
elektrische vermogen van de netstroom.
Gebruik altijd een juist geïnstalleerd
schokbestendig stopcontact.
Gebruik geen adapters met meerdere stekkers
en verlengkabels.
Zorg dat u de netstekker en het netsnoer niet
beschadigt. Indien de voedingskabel moet
worden vervangen, dan moet dit gebeuren door
onze Klantenservice.
Steek de stekker pas in het stopcontact als de
installatie is voltooid. Zorg ervoor dat het
netsnoer na installatie bereikbaar is.
Trek niet aan het netsnoer om het apparaat los
te koppelen. Trek altijd aan de stekker.
Dit apparaat is voorzien van een 13 A stekker.
Als de zekering van de stekker vervangen moet
worden, moet een ASTA (BS 1362)-zekering
van 13-ampère worden gebruikt (uitsluitend VK
en Ierland).
WATERAANSLUITING
Beschadig de waterslangen niet.
Indien buizen lang niet zijn gebruikt, er
reparaties hebben plaatsgevonden of er nieuwe
apparaten zijn geplaatst (watermeters, enz.),
moet u, voordat de nieuwe buizen worden
aangesloten, het water laten stromen tot het
schoon en helder is.
Zorg ervoor dat er geen zichtbare waterlekken
zijn tijdens en na het eerste gebruik van het
apparaat.
De watertoevoerslang heeft een
veiligheidsventiel en een omhulsel met een
hoofdkabel aan de binnenkant.
WAARSCHUWING! Gevaarlijke
spanning.
Als de watertoevoerslang beschadigd is, sluit
dan onmiddellijk de waterkraan en haal de
stekker uit het stopcontact. Neem contact op
met de service-afdeling om de
watertoevoerslang te vervangen.
GEBRUIK
Plaats geen ontvlambare producten of items die
vochtig zijn door ontvlambare producten in, bij of
op het apparaat.
Vaatwasmiddel is gevaarlijk. Volg de
veiligheidsinstructies op de verpakking van het
wasmiddel op.
Speel niet met het water van het apparaat en
drink het niet op.
Verwijder de borden pas uit het apparaat als het
programma is voltooid. Er kan wat wasmiddel
op de vaat achterblijven.
Bewaar geen voorwerpen en oefen geen druk
uit op de open deur van het apparaat.
Het apparaat kan hete stoom laten ontsnappen
als u de deur opent terwijl er een programma
wordt uitgevoerd.
BINNENVERLICHTING
WAARSCHUWING! Gevaar voor
letsel.
Met betrekking tot de lamp(en) in dit product en
reservelampen die afzonderlijk worden verkocht:
Deze lampen zijn bedoeld om bestand te zijn
tegen extreme fysieke omstandigheden in
huishoudelijke apparaten, zoals temperatuur,
trillingen, vochtigheid, of zijn bedoeld om
informatie te geven over de operationele status
van het apparaat. Ze zijn niet bedoeld voor
gebruik in andere toepassingen en zijn niet
geschikt voor verlichting in huishoudelijke
ruimten.
Neem contact op met het service-centrum om
de binnenverlichting te vervangen.
SERVICE
Neem contact op met de erkende servicedienst
voor reparatie van het apparaat. Gebruik
uitsluitend originele reserveonderdelen.
Houd er rekening mee dat zelfreparatie of niet-
professionele reparatie gevolgen kan hebben
voor de veiligheid en de garantie kan doen
vervallen.
De volgende reserveonderdelen zijn
beschikbaar gedurende 7 jaar nadat het model
is stopgezet: motor, circulatie- en afvoerpomp,
verwarmingstoestellen en
verwarmingselementen, inclusief
warmtepompen, leidingen en aanverwante
apparatuur, waaronder slangen, kleppen, filters
en aquastops, structurele en interne onderdelen
met betrekking tot deurconstructies, printplaten,
elektronische displays, drukschakelaars,
thermostaten en sensoren, software en
firmware, inclusief resetsoftware. Houd er
4
rekening mee dat sommige van deze
reserveonderdelen alleen beschikbaar zijn voor
professionele reparateurs en dat niet alle
reserveonderdelen relevant zijn voor alle
modellen.
De volgende reserveonderdelen zullen
beschikbaar zijn gedurende 10 jaar nadat het
model is stopgezet: deurscharnieren en -
afdichtingen, andere afdichtingen, spuitarmen,
afvoerfilters, binnenrekken en plastic
randapparatuur zoals manden en deksels.
VERWIJDERING
WAARSCHUWING! Gevaar voor
letsel of verstikking.
Haal de stekker uit het stopcontact.
Snij het netsnoer van het apparaat af en gooi dit
weg.
Verwijder de deurgreep om te voorkomen dat
kinderen en huisdieren opgesloten raken in het
apparaat.
PRODUCTBESCHRIJVING
De afbeeldingen hieronder geven
alleen een algemeen productoverzicht.
Raadpleeg voor meer gedetailleerde
informatie andere hoofdstukken en/of
documenten die bij het apparaat zijn
meegeleverd.
4
3
7
9
8
10
56
11
1
2
1
Bovenste sproeiarm
2
Onderste sproeiarm
3
Filters
4
Typeplaatje
5
Zoutreservoir
6
Ventilatie
7
Glansmiddeldoseerbakje
8
Vaatwasmiddeldoseerbakje
9
Bestekkorf
10
Onderste korf
11
Bovenste korf
5
BEDIENINGSPANEEL
1 32
456
1
Display
2
Controlelampjes
3
Aan-/uittoets/Resettoets
4
Toets startuitstel
5
ECO programmatoets
6
Programmatoetsen
INDICATIELAMPJES
Indicatielampje Beschrijving
Indicatielampje droogfase. Het is ingeschakeld wanneer u een programma selec-
teert met de droogfase. Het gaat knipperen wanneer de droogfase loopt.
Zoutindicatielampje. Dit is aan als het zoutreservoir bijgevuld dient te worden. Dit in-
dicatielampje is altijd uit als het programma in werking is.
Glansmiddelindicatielampje. Dit is aan als het glansmiddeldoseerbakje bijgevuld
dient te worden. Dit indicatielampje is altijd uit als het programma in werking is.
Controlelampje van wasfase. Dit is aan wanneer de wasfase loopt.
Controlelampje spoelfase. Dit is aan wanneer de spoelfase loopt.
PROGRAMMA’S
De nummering van de programma´s in de tabel (P1,
P2, enz.) geeft hun volgorde op het
bedieningspaneel weer.
De volgorde van de programma´s in de tabel geeft
mogelijk hun volgorde op het bedieningspaneel niet
weer.
6
Programma
Mate van bevuiling
Type lading
Programmafasen
P1
ECO
1)
Normale bevuiling
Serviesgoed en bestek
Voorwas
Wassen op 50 °C
Spoelbeurten
Drogen
P2
Auto
2)
Alles
Serviesgoed, bestek, potten
en pannen
Voorwas
Wassen van 50 - 60 °C
Spoelbeurten
Drogen
P3
160 min
3)
Zware bevuiling
Serviesgoed, bestek, potten
en pannen
Voorwas
Wassen op 60 °C
Spoelbeurten
Drogen
P4
90 min
4)
Normale bevuiling
Serviesgoed en bestek
Voorwas
Wassen op 60 °C
Spoelbeurten
Drogen
P5
30 min
5)
Licht bevuild
Serviesgoed en bestek
Wassen op 50 °C
Spoelbeurten
P6
Glass Care
6)
Normaal of licht bevuild
Delicaat serviesgoed en glas-
werk
Voorwas
Wassen op 45 °C
Spoelbeurten
Drogen
P7
Rinse Hold
7)
Alles Voorwas
P0
Machine Care
8)
Geen lading Zelfreiniging
1) Dit programma heeft het meest efficiënte water- en energieverbruik voor normaal vervuild serviesgoed
en bestek. Dit is het standaardprogramma voor testinstituten. Dit programma wordt gebruikt voor de be-
oordeling van de naleving van Verordening (EU) 2019/2022 van de Commissie inzake ecologisch ontwerp.
2) Het apparaat detecteert de vuilgraad en de hoeveelheid voorwerpen in de rekken. De temperatuur, de
hoeveelheid water, het energieverbruik en de programmaduur worden automatisch aangepast.
3) Dit programma is geschikt voor het wassen van een lading met een verschillende mate van vuilheid.
Plaats erg zwaar vervuild serviesgoed in het onderste rek en normaal bevuild serviesgoed in het bovenste
rek. De waterdruk en de watertemperatuur in het onderste rek zijn hoger dan in het bovenste rek.
4) Dit programma is geschikt voor het wassen van normaal vuile vaat.
5) Dit programma is geschikt voor het wassen van een hele of een halve lading met recent vuil. Het zorgt in
een korte tijd voor goede wasresultaten.
6) Dit programma regelt de watertemperatuur voor een zorgvuldige behandeling van kwetsbare voorwer-
pen, in het bijzonder glaswerk.
7) Met dit programma kunt u voedselresten snel van de vaat afspoelen om zo geurvorming in het apparaat
te voorkomen. Gebruik geen vaatwasmiddel bij dit programma.
8) Dit programma is ontworpen om de binnenkant van het apparaat effectief en efficiënt te reinigen. Het
verwijdert kalkaanslag en vetresten. Het programma dient minstens iedere 2 maanden zonder vaat te wor-
den gedraaid met een ontkalker of een vaatwasserreiniger.
7
VERBRUIKSWAARDEN
Programma
1)
2)
Water
(l)
Energie
(kWh)
Duur
(min)
P1
ECO
9.9
3)
/ 9.9
4)
0.821
3)
/ 0.835
4)
240
3)
/ 240
4)
P2
Auto
8.2 - 11.2 0.67 - 1.08 120 - 170
P3
160 min
9.2 - 11.2 0.96 - 1.08 160
P4
90 min
9.1 - 11.1 1.01 - 1.13 90
P5
30 min
9.4 - 11.4 0.57 - 0.69 30
P6
Glass Care
10.3 - 12.5 0.79 - 0.97 105
P7
Rinse Hold
3.7 - 4.5 0.02 - 0.05 15
P0
Machine Care
8.4 - 10.2 0.60 - 0.71 60
1) De druk en temperatuur van het water, de variaties in stroomtoevoer, de opties en de hoeveelheid vaat
kunnen de verbruikswaarden veranderen.
2) De waarden voor andere programma's dan ECO zijn slechts een indicatie.
3) Conform verordening 1016/2010.
4) Conform verordening 2019/2022.
AANWIJZINGEN VOOR TESTINSTITUTEN
Om de nodige informatie te ontvangen over het
uitvoeren van prestatietesten (bijv. volgens
EN60436 ), stuurt u een e-mail naar:
Vermeld in uw verzoek de productnummercode
(PNC) dat u op het typeplaatje aantreft.
Raadpleeg voor andere vragen betreffende uw
vaatwasmachine het serviceboekje dat met uw
apparaat is meegeleverd.
INSTELLINGEN
PROGRAMMAKEUZEMODUS EN
GEBRUIKERSMODUS
Als het apparaat in de programmakeuzemodus
staat, kan een programma worden ingesteld en de
gebruikersmodus worden ingevoerd.
Instellingen beschikbaar in de
gebruikersmodus:
Het niveau van de waterverzachter afgestemd
op de waterhardheid.
De activering of deactivering van de aanduiding
leeg glansmiddelreservoir.
De activering of deactivering van de AirDry.
Het apparaat slaat de instellingen op, dus u
hoeft deze niet voor iedere cyclus te
configureren.
De programmakeuzemodus instellen
Het apparaat staat in de programmakeuzemodus
als het display een programmanummer weergeeft.
Na de activering staat het apparaat in de
programmakeuzemodus en wordt het programma
P1 standaard geselecteerd.
Stel in andere gevallen de programmakeuzemodus
als volgt in:
8
Als het programma niet is gestart, schakelt
u het apparaat in en uit.
Als het programma of het aftellen van de
uitgestelde start loopt, houdt u de aan/uit-
toets 3 seconden ingedrukt.
Naar gebruikersmodus
Zorg dat het apparaat in de
programmakeuzemodus staat.
Houd, om naar de gebruikersmodus te gaan,
tegelijkertijd en ingedrukt tot de
indicatielampjes , en knipperen en
het volgende op het display verschijnt: - -.
DE WATERONTHARDER
De waterontharder verwijdert mineralen van de
watertoevoer die een nadelige invloed hebben op
de wasresultaten en het apparaat.
Hoe hoger het gehalte van deze mineralen, des te
harder is het water. De waterhardheid wordt
gemeten in de volgende gelijkwaardige schalen.
De waterontharder moet worden afgesteld op de
hardheid van het water in uw woonplaats. Uw
waterleidingbedrijf kan u informeren over de
hardheid van het water in uw woonplaats. Het is
belangrijk om het correcte niveau voor de
waterontharder in te stellen voor goede
wasresultaten.
Waterhardheid
Duitse hardheid
(°dH)
Franse hardheid
(°fH)
mmol/l
Clarke-hard-
heid
Wateronthardingsni-
veau
47 - 50 84 - 90 8,4 - 9,0 58 - 63 10
43 - 46 76 - 83 7,6 - 8,3 53 - 57 9
37 - 42 65 - 75 6,5 - 7,5 46 - 52 8
29 - 36 51 - 64 5,1 - 6,4 36 - 45 7
23 - 28 40 - 50 4,0 - 5,0 28 - 35 6
19 - 22 33 - 39 3,3 - 3,9 23 - 27
5
1)
15 - 18 26 - 32 2,6 - 3,2 18 - 22 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 2
<4 <7 <0,7 < 5
1
2)
1) Fabrieksinstelling.
2) Gebruik geen zout op dit niveau.
Stel ongeacht het gebruikte soort wasmiddel
het juiste waterhardheidniveau in om de
bijvulindicator voor zout geactiveerd te
houden.
Multivaatwastabletten die zout
bevatten zijn niet effectief genoeg als
waterontharder.
Regeneratieproces
Voor de juiste werking van de waterontharder moet
de hars van de ontharder regelmatig worden
geregenereerd. Dit proces is automatisch en maakt
deel uit van de normale vaatwasmachinewerking.
Wanneer de voorgeschreven hoeveelheid water (zie
waarden in de tabel) is gebruikt sinds het vorige
regeneratieproces, wordt een nieuw
regeneratieproces gestart tussen de laatste
spoeling en het einde van het programma.
9
Wateronthardingsni-
veau
Hoeveelheid water (l)
1 250
2 100
3 62
4 47
5 25
6 17
7 10
8 5
9 3
10 3
In het geval van de hoge wateronthardersinstelling
kan dit ook in het midden van het programma
gebeuren, vóór het spoelen (tweemaal tijdens een
programma). De start van de regeneratie heeft
geen invloed op de cyclusduur, tenzij deze
plaatsvindt in het midden van een programma of
aan het einde van een programma met een korte
droogfase. In dat geval verlengt de regeneratie de
totale duur van een programma met nog eens 5
minuten.
Vervolgens kan het spoelen van de waterontharder
wat 5 minuten duurt, beginnen in dezelfde cyclus of
aan het begin van het volgende programma. Deze
activiteit verhoogt het totale waterverbruik van een
programma met 4 liter en het totale energieverbruik
van een programma met 2 Wh. Het spoelen van de
waterontharder eindigt met een volledige afvoer.
Elke uitgevoerde waterontharderspoeling (mogelijk
meer dan één in dezelfde cyclus) kan de
programmaduur met nog eens 5 minuten verlengen
wanneer deze op enig moment aan het begin of in
het midden van een programma plaatsvindt.
Alle in deze paragraaf genoemde
verbruikswaarden worden bepaald
volgens de huidige geldende norm in
laboratoriumomstandigheden met
waterhardheid 2,5 mmol/l volgens de
verordening 2019/2022
(waterontharder: niveau 3).
De druk en de temperatuur van het
water en de variaties van de
netvoeding kunnen de waarden
veranderen.
Het instellen van het wateronthardingsniveau
Zorg dat het apparaat in de gebruikersmodus staat.
1. Druk eenmaal op
.
Het indicatielampje
blijft knipperen
en de resterende indicatielampjes zijn uit.
Het display toont de huidige instelling: bijv.
= niveau 5.
2. Druk op om de instelling te wijzigen. Elke
aanraking van verhoogt het niveaunummer.
Als u het niveau 10 bereikt, begint het tellen
weer vanaf niveau 1.
3. Druk op de aan/uit-toets om de instelling te
bevestigen.
DE AANDUIDING VAN LEEG
GLANSMIDDELRESERVOIR
Met glansmiddel wordt het serviesgoed zonder
vlekken of strepen gedroogd. Het wordt
automatisch vrijgegeven tijdens de warme
spoelfase.
Als het glansmiddelreservoir leeg is, gaat de
glansmiddelindicator branden om aan te geven dat
u glansmiddel moet bijvullen. Als u tevreden bent
met de droogresultaten bij het gebruik van alleen
multitabletten, kunt u de aanduiding voor het
bijvullen van glansmiddel deactiveren. Voor de
beste droogprestaties dient u echter altijd
glansmiddel te gebruiken.
Schakel de aanduiding in om de
glansmiddelindicator actief te houden als u
standaard wasmiddel of multitabletten zonder
glansmiddel bevat.
De melding voor leeg glansmiddelreservoir
deactiveren
Zorgt dat het apparaat in de gebruikersmodus
staat.
1. Druk twee keer.
Het indicatielampje blijft knipperen en
de resterende indicatielampjes zijn uit.
Het display toont de huidige instelling.
= de melding van leeg
glansmiddelreservoir is ingeschakeld.
= de melding van leeg
glansmiddelreservoir is ingeschakeld.
2. Druk om de instelling te wijzigen.
3. Druk op de aan/uit-toets om de instelling te
bevestigen.
10
AIRDRY
AirDry verbetert de droogresultaten. Tijdens de
droogfase opent de deur van het apparaat
automatisch en blijft op een kier staan.
AirDry wordt bij alle programma's behalve Rinse
Hold (indien van toepassing) automatisch
geactiveerd.
LET OP! Probeer de deur van het
apparaat niet binnen 2 minuten na
automatisch openen te sluiten. Dit kan
het apparaat beschadigen.
LET OP! Als kinderen toegang tot het
apparaat hebben, adviseren we AirDry
te deactiveren. Het automatisch
openen van de deur kan een gevaar
vormen.
Deactiveren AirDry
Zorg dat het apparaat in de gebruikersmodus staat.
1. Druk drie keer op .
Het indicatielampje blijft knipperen en
de resterende indicatielampjes zijn uit.
Het display toont de huidige instelling.
= AirDry is geactiveerd.
= AirDry is uitgeschakeld.
2. Druk op om de instelling te wijzigen.
3. Druk op de aan/uit-toets om de instelling te
bevestigen.
VOOR HET EERSTE GEBRUIK
1. Controleer of het ingestelde stand van de
waterontharder juist is voor de
waterhardheid in uw omgeving. Indien
niet, stel dan de stand van de
waterontharder juist in.
2. Vul het zoutreservoir.
3. Vul het glansspoelmiddeldoseerbakje.
4. Draai de waterkraan open.
5. Start een programma om resten te verwijderen
die misschien nog in het apparaat zijn
achtergebleven. Gebruik geen afwasmiddel en
plaats geen vaat in de korven.
Na het starten van het programma laadt het
apparaat de hars in de waterverzachter maximaal 5
minuten op. De wasfase start pas nadat deze
procedure voltooid is. De procedure wordt
regelmatig herhaald.
HET ZOUTRESERVOIR
LET OP! Gebruik uitsluitend grof zout
dat voor vaatwassers is gemaakt. Fijn
zout verhoogt het risico op corrosie.
Het zout wordt gebruikt om de hars in de
waterontharder te herladen en voor goede
wasresultaten voor dagelijks gebruik.
HET ZOUTRESERVOIR VULLEN
1. Draai de dop linksom om het zoutreservoir te
openen.
2. Doe 1 liter water in het zoutreservoir (alleen de
eerste keer).
3. Vul het zoutreservoir met 1 kg zout (totdat het
vol is).
4. Schud de trechter voorzichtig bij het handvat
om de laatste korrels erin te krijgen.
5. Verwijder het zout rond de opening van het
zoutreservoir.
11
6. Draai de dop van het zoutreservoir rechtsom
om het zoutreservoir te sluiten.
LET OP! Water en zout kunnen uit het
zoutreservoir stromen als u het bijvult.
Start na het bijvullen van het
zoutreservoir onmiddellijk een
programma om corrosie te voorkomen.
HET VULLEN VAN HET
GLANSMIDDELDOSEERBAKJE
M
A
X
1
2
3
4
+
-
A B
D
C
LET OP! Gebruik alleen
glansspoelmiddel voor vaatwassers.
1. Druk op de ontgrendelknop (D) om het deksel
te openen (C).
2. Vul het doseerbakje (A) met glansmiddel niet
verder dan de aanduiding ''MAX''.
3. Verwijder gemorst glansmiddel met een
absorberend doekje om te voorkomen dat er te
veel schuim ontstaat.
4. Sluit het deksel. Zorg ervoor dat het
ontgrendelknopje op zijn plaats dichtklikt.
U kunt het schuifje voor de vrij te
geven hoeveelheid (B) instellen tussen
stand 1 (laagste hoeveelheid) en
stand 4 of 6 (hoogste hoeveelheid).
DAGELIJKS GEBRUIK
1. Draai de waterkraan open.
2. Druk op de aan-/uittoets om het apparaat te
activeren.
Zorg dat het apparaat in de keuzemodus
Programma staat.
Vul het zoutreservoir als het
zoutindicatielampje brandt.
Vul het glansmiddeldoseerbakje als het
indicatielampje van het glansmiddel brandt.
3. Ruim de korven in.
4. Voeg vaatwasmiddel toe.
5. U dient het juiste programma in te stellen en te
starten voor het type lading en de mate van
vervuiling.
VAATWASMIDDEL GEBRUIKEN
20
30
A
B
C
12
LET OP! Gebruik uitsluitend
vaatwasmiddelen die specifiek zijn
bedoeld voor gebruik in vaatwassers
1. Druk op de ontgrendelknop (B) om het deksel
(C) te openen.
2. Doe de vaatwastablet in het doseerbakje (A) .
3. Plaats een kleine hoeveelheid van het
vaatwasmiddel in de binnenkant van de deur
van het apparaat als het programma een
voorwasfase heeft.
4. Sluit het deksel. Zorg ervoor dat het
ontgrendelknopje op zijn plaats dichtklikt.
EEN PROGRAMMA INSTELLEN EN STARTEN
De Auto Off-functie
Deze functie verlaagt het energieverbruik door het
apparaat automatisch uit te schakelen als het niet
werkt.
De functie gaat werken:
Als het wasprogramma is voltooid.
Als er na 5 minuten nog geen programma is
gestart.
Een programma starten
1. Laat de deur van het apparaat op een kier.
2. Druk op de Aan/uit-toets om het apparaat te
activeren. Zorg dat het apparaat in de
programmakeuzemodus staat.
3. Druk herhaaldelijk op of totdat het
nummer van het gekozen programma wordt
weergegeven. Het nummer van het programma
wordt circa 3 seconden op het display
weergegeven en vervolgens geeft het display
de programmaduur weer.
4. Sluit de deur van de afwasmachine om het
programma te starten.
Een programma starten met uitgestelde start
1. Stel een programma in.
2. Blijf op de uitsteltoets drukken tot het display
de uitgestelde tijd toont die u wilt instellen (van
1 tot 24 uur).
Het indicatielampje brandt.
3. Sluit de deur van de afwasmachine om het
aftellen te starten.
Tijdens het aftellen is het mogelijk om de
uitgestelde tijd te wijzigen, maar niet om de
programmakeuze te wijzigen.
Als het aftellen klaar is, start het programma en
gaat het indicatielampje van de lopende fase
branden. Het indicatielampje
is uit.
De deur openen als het apparaat in werking
is
Als u de deur opent terwijl een programma loopt,
stopt het apparaat. Dit kan het energieverbruik en
de programmaduur beïnvloeden. Als u de deur
weer sluit, gaat het apparaat verder vanaf het
moment van onderbreking.
Als de deur tijdens de droogfase
langer dan 30 seconden wordt
geopend, stopt het lopende
programma. Dit gebeurt niet als de
deur wordt geopend door de functie
AirDry.
Probeer de deur van het apparaat niet
binnen 2 minuten nadat AirDry hem
automatisch opent te openen, want dit
kan schade aan het apparaat
veroorzaken.
Als hierna de deur gedurende ten
minste 3 minuten wordt gesloten,
beëindigt het draaiende programma.
De uitgestelde start annuleren
Druk gedurende 3 seconden op de aan/uit-knop
totdat het apparaat in de programmakeuzemodus
staat.
Als u de uitgestelde start annuleert, moet u het
programma opnieuw instellen.
Het programma annuleren
Houd gedurende 3 seconden de aan/uit-knop
ingedrukt totdat het apparaat in de
programmakeuzemodus staat.
Controleer of er vaatwasmiddel in het
afwasmiddeldoseerbakje aanwezig is voordat u een
nieuw programma start.
Einde van het programma
Als het programma is voltooid, schakelt de Auto Off
functie het apparaat automatisch uit.
Alle knoppen zijn inactief, behalve de aan/uit-toets.
Draai de waterkraan dicht.
13
AANWIJZINGEN EN TIPS
ALGEMEEN
Volg de onderstaande tips om te zorgen voor
optimale schoonmaak- en droogresultaten en ook
het milieu te helpen beschermen.
Het afwassen in de vaatwasser volgens de
instructies in de gebruikershandleiding verbruikt
meestal minder water en energie dan het
afwassen met de hand.
Laad de vaatwasser volledig in om water en
energie te besparen. Voor de beste
reinigingsresultaten plaatst u items in de korven
volgens de instructies in de
gebruikershandleiding en overbelast u de korven
niet.
Spoel de vaat niet eerst af. Het verhoogt het
water- en energieverbruik. Kies indien nodig een
programma met voorwasfase.
Verwijder grotere voedselresten van de borden
en lege bekers en glazen voordat u ze in het
apparaat plaatst.
Week kookgerei met stevig vastgekookt of
vastgebakken voedsel of poets het lichtjes
voordat u het in het apparaat wast.
Zorg ervoor dat de vaat in de manden elkaar
niet raakt of overlapt. Alleen dan kan het water
de vaat volledig bereiken en wassen.
U kunt apart vaatwasmiddel, glansmiddel en
zout gebruiken of kiezen voor het gebruik van
multitabletten (bijv. ''alles-in-1''). Volg de
instructies op de verpakking.
Kies een programma op basis van het type
lading en de mate van bevuiling. ECO biedt het
meest efficiënte gebruik van water en
energieverbruik.
Om kalkaanslag in het apparaat te voorkomen:
Vul de zoutcontainer indien nodig bij.
Gebruik de aanbevolen dosering van het
wasmiddel en spoelglansmiddel.
Controleer of het ingestelde stand van de
waterontharder juist is voor de
waterhardheid in uw omgeving.
Volg de instructies in het hoofdstuk
"Onderhoud en reiniging".
GEBRUIK VAN ZOUT, GLANSMIDDEL EN
VAATWASMIDDEL
Gebruik enkel zout, glansmiddel en
vaatwasmiddel voor vaatwassers. Overige
producten kunnen het apparaat beschadigen.
Maar in gebieden met hard en erg hard water
raden we het gebruik aan van standaard
vaatwasmiddel (poeder, gel, tabletten zonder
extra middelen), met afzonderlijk glansmiddel en
zout voor optimale reinigings- en
droogresultaten.
Vaatwasmiddeltabletten lossen bij korte
programma's niet geheel op. Om te voorkomen
dat vaatwasmiddelresten op het servies
achterblijven, raden we u aan om tabletten enkel
bij lange programma's te gebruiken.
Gebruik altijd de juiste hoeveelheid wasmiddel.
Onvoldoende dosering van het wasmiddel kan
leiden tot slechte reinigingsresultaten en
hardwaterfilmen of vlekken op de voorwerpen.
Het gebruik van te veel wasmiddel met zacht of
verzacht water resulteert in wasmiddelresten op
de borden. Pas de hoeveelheid wasmiddel aan
op basis van de waterhardheid. Zie de
instructies van de vaatwasmiddelfabrikant.
Gebruik altijd de juiste hoeveelheid
spoelglansmiddel. Onvoldoende dosering van
spoelglansmiddel vermindert de
droogresultaten. Het gebruik van te veel
spoelglansmiddel resulteert in blauwachtige
lagen op de items.
Controleer of het wateronthardersniveau correct
is. Als het niveau te hoog is, kan de verhoogde
hoeveelheid zout in het water leiden tot roest op
bestek.
WAT MOET U DOEN ALS U WILT STOPPEN
MET HET GEBRUIK VAN MULTITABLETTEN
Doe het volgende voordat u begint met het
gebruiken van apart wasmiddel, zout en
glansmiddel.
1. Stel het hoogste niveau van de waterontharder
in.
2. Zorg ervoor dat het zout- en het
glansmiddeldoseerbakje gevuld zijn.
3. Start het kortste programma met een
spoelfase. Voeg geen afwasmiddel toe en ruim
de mandjes niet in.
4. Als het programma is voltooid, wijzigt u de
waterontharder in de waterhardheid van uw
omgeving.
5. Stel de hoeveelheid glansmiddel in.
DE KORVEN INRUIMEN
Gebruik altijd de hele ruimte van de mandjes.
Gebruik het apparaat uitsluitend om
afwasmachinebestendige voorwerpen af te
wassen.
Was in het apparaat geen items gemaakt van
hout, hoorn, aluminium, tin en koper, omdat ze
kunnen barsten, kromtrekken, verkleuren of
putjes kunnen krijgen.
14
Reinig geen voorwerpen in het apparaat die
water kunnen absorberen (sponzen,
keukenhanddoeken).
Plaats holle voorwerpen (bijv. kopjes, glazen en
pannen) met de opening naar beneden.
Zorg er voor dat glazen elkaar niet aanraken.
Leg lichte voorwerpen in het bovenrek. Zorg
ervoor dat de voorwerpen niet kunnen
verschuiven.
Doe bestek en kleine items in het bestekmand.
Zorg er voor dat de sproeiarmen vrij kunnen
ronddraaien voordat u een programma start.
VOOR HET STARTEN VAN EEN
PROGRAMMA
Zorg er, voordat u het gekozen programma start,
voor dat:
De filters schoon zijn en correct zijn geplaatst.
De dop van het zoutreservoir goed dicht zit.
De sproeiarmen niet zijn verstopt.
Er regenereerzout en glansmiddel is
toegevoegd (tenzij u gecombineerde
afwastabletten gebruikt).
De positie van de items in de mandjes correct
is.
Het programma geschikt is voor het type lading
en de mate van bevuiling.
De juiste hoeveelheid afwasmiddel is gebruikt.
DE REKKEN UITRUIMEN
1. Laat de borden afkoelen voordat u deze uit het
apparaat neemt. Hete borden zijn gevoelig voor
beschadigingen.
2. Ruim eerst het onderrek en dan het bovenrek
uit.
Na voltooiing van het programma kan
er zich aan de binnenkant van het
apparaat nog water bevinden.
ONDERHOUD EN REINIGING
WAARSCHUWING! Schakel het
apparaat uit en trek de stekker uit het
stopcontact voordat u
onderhoudshandelingen verricht.
Vuile filters en verstopte sproeiarmen
verminderen de wasresultaten.
Controleer regelmatig de filters en
reinig deze zo nodig.
DE FILTERS REINIGEN
Het filtersystem bestaat uit 3 delen.
C
B
A
1. Draai de filter (B) linksom en verwijder het.
2. Verwijder de filter (C) uit de filter (B).
3. Verwijder de platte filter (A).
4. Was de filters.
15
5. Zorg ervoor dat er geen etensresten of vuil in of
rond de rand van de opvangbak zitten.
6. Plaats de platte filter terug (A). Zorg ervoor dat
het goed onder de 2 geleidingen zit.
7. Plaats de filters (B) en (C) terug.
8. Plaats de filter (B) terug in de platte filter (A).
Rechtsom draaien tot het vastzit.
LET OP! Een onjuiste plaatsing van de
filters kan leiden tot slechte
wasresultaten en het apparaat
beschadigen.
DE ONDERSTE SPROEIARM
SCHOONMAKEN
We raden u aan om de onderste sproeiarm
regelmatig schoon te maken om te voorkomen dat
vuil de gaten verstopt.
Verstopte gaten kunnen onbevredigende
wasresultaten opleveren.
1. Trek de onderste sproeiarm naar boven om
deze te verwijderen.
2. Reinig de sproeiarm onder stromend water.
Gebruik een smal en puntig gereedschap, bijv.
een tandenstoker, om de vuildeeltjes uit de
gaten te verwijderen.
3. Duw de sproeiarm naar beneden om deze weer
terug te plaatsen.
16
BUITENKANT REINIGEN
Maak het apparaat schoon met een vochtige,
zachte doek.
Gebruik alleen neutrale schoonmaakmiddelen.
Gebruik geen schuurmiddelen, schuursponsjes
of oplosmiddelen.
DE BINNENKANT VAN DE MACHINE
REINIGEN
Reinig het apparaat zorgvuldig, inclusief de
rubberen afdichting van de deur, met een
zachte, vochtige doek.
Gebruik om de prestaties van uw apparaat te
onderhouden minstens eenmaal per maand een
reinigingsproduct dat specifiek is ontwikkeld
voor vaatwassers. Volg de instructies op de
verpakking van de producten zorgvuldig op.
Gebruik geen schuurmiddelen, schuursponsjes,
scherpe voorwerpen, sterke chemicaliën,
pannensponsjes of oplosmiddelen.
Het regelmatig gebruiken van korte programma
´s kan ophoping van vet en kalk in het apparaat
tot gevolg hebben. Draai minstens tweemaal per
maand lange programma´s om deze ophoping te
voorkomen.
VERWIJDEREN VAN VREEMDE
VOORWERPEN
Controleer de filters en de opvangbak na elk
gebruik van de vaatwasser. Vreemde voorwerpen
(bijv. stukken glas, plastic, botten of tandenstokers,
enz.) verminderen de reinigingsprestaties en
kunnen schade aan de afvoerpomp veroorzaken.
1. Demonteer het filtersysteem volgens de
instructies in dit hoofdstuk.
2. Verwijder alle vreemde voorwerpen met de
hand.
LET OP! Als u de voorwerpen niet
kunt verwijderen, neem dan
contact op met een erkend
servicecentrum.
3. Monteer de filters opnieuw volgens de
instructies in dit hoofdstuk.
PROBLEEMOPLOSSING
WAARSCHUWING! Onjuiste
reparatie van het apparaat kan een
gevaar voor de veiligheid van de
gebruiker vormen. Alle reparaties
moeten worden uitgevoerd door
bevoegd personeel.
Het merendeel van de problemen die
ontstaan kunnen worden opgelost zonder
contact op te nemen met een erkend
servicecentrum.
Zie de onderstaande tabel voor informatie over
mogelijke problemen.
Bij sommige problemen wordt er op de display een
alarmcode weergegeven.
Probleem en alarmcode Mogelijke oorzaak en oplossing
U kunt het apparaat niet acti-
veren.
Controleer of de netstekker is aangesloten op het stopcontact.
Zorg dat er geen zekering in de zekeringenkast is doorgebrand.
Het programma start niet. Controleer of de deur van het apparaat gesloten is.
Als startuitstel is ingesteld, annuleert u deze functie of wacht u
tot het einde van het aftellen.
Het apparaat herlaadt de hars uit de waterontharder. De duur
van de procedure is ongeveer 5 minuten.
17
Probleem en alarmcode Mogelijke oorzaak en oplossing
Het apparaat wordt niet gevuld
met water.
Het display toont i10 of i11.
Zorg ervoor dat de waterkraan geopend is.
Ga na of de druk van de watervoorziening niet te laag is. Neem
voor deze informatie contactpersoon op met uw plaatselijke
waterleidingsbedrijf.
Verzeker u ervan dat de waterkraan niet verstopt is.
Controleer of het filter in de toevoerslang niet verstopt is.
Controleer of er geen knikken of bochten in de watertoevoers-
lang aanwezig zijn.
Het apparaat pompt geen wa-
ter weg.
Op het display verschijnt i20.
Verzeker u ervan dat de gootsteenafvoer niet verstopt is.
Controleer of het binnenfiltersysteem niet verstopt is.
Verzeker u ervan dat de aftapslang geen knikken of bochten
heeft.
Het beschermingssysteem te-
gen waterlekkage is aan.
Op het display verschijnt i30.
Draai de waterkraan dicht.
Zorg ervoor dat het apparaat correct geïnstalleerd is.
Zorg ervoor dat de korven zijn geladen volgens de instructies in
de gebruikershandleiding.
Storing van de waterniveaude-
tectiesensor.
Op het display verschijnt i41 -
i44.
Zorg dat de filters schoon zijn.
Schakel het apparaat uit en aan.
Storing van de waspomp of de
afvoerpomp.
Het display toont i51 - i59 of
i5A - i5F.
Schakel het apparaat uit en aan.
De temperatuur van het water
in het apparaat is te hoog of er
is een storing in de tempera-
tuursensor opgetreden.
Het display toont i61 of i69.
Zorg ervoor dat de temperatuur van het inlaatwater niet hoger
is dan 60° C.
Schakel het apparaat uit en aan.
Technische storing van het ap-
paraat.
Het display toont iC0 of iC3.
Schakel het apparaat uit en aan.
Het niveau van het water in het
apparaat is te hoog.
Op het display verschijnt iF1.
Schakel het apparaat uit en aan.
Zorg dat de filters schoon zijn.
Zorg ervoor dat de uitlaatslang op de juiste hoogte boven de
vloer is geïnstalleerd. Raadpleeg de installatie-instructies.
Het apparaat stopt en start
meerdere keren tijdens de
werking.
Dat is normaal. Het voorziet in optimale reinigingsresultaten en
energiebesparing.
Het programma duurt te lang. Als de optie uitgestelde start is ingesteld, annuleert u deze
functie of wacht u tot het aftellen is voltooid.
De resterende duur in het dis-
play wordt verlengd en scha-
kelt bijna naar het eind van de
programmaduur.
Dit is geen storing. Het apparaat werkt goed.
18
Probleem en alarmcode Mogelijke oorzaak en oplossing
Kleine lekkage uit de deur van
het apparaat.
Het apparaat staat niet waterpas. Draai aan de verstelbare
pootjes (indien van toepassing).
De deur van het apparaat is niet gecentreerd op de kuip. Ver-
stel de achterpoot (indien van toepassing).
De deur van het apparaat sluit
moeilijk.
Het apparaat staat niet waterpas. Draai aan de verstelbare
pootjes (indien van toepassing).
Delen van het serviesgoed steken uit de korven.
Ratelende / kloppende gelui-
den vanuit het apparaat.
Het serviesgoed is niet juist in de korven gerangschikt. Raad-
pleeg de folder voor het laden van de korven.
Zorg ervoor dat de sproeiarmen vrij kunnen ronddraaien.
Het apparaat maakt kortslui-
ting.
De stroomsterkte is onvoldoende om alle tegelijk werkende ap-
paraten van stroom te voorzien. Controleer de stroomsterkte
van het stopcontact en het vermogen op de meter, of zet één
van de in gebruik zijnde apparaten uit.
Interne elektrische storing van het apparaat. Neem contact op
met een erkend servicecentrum.
Raadpleeg "Voor het eerste
gebruik", "Dagelijks gebruik", or
"Hints en tips" voor andere mogelijke
oorzaken.
Schakel het apparaat na controle aan en uit. Als het
probleem opnieuw optreedt, neemt u contact op
met onze klantenservice of een servicecentrum.
Voor alarmcodes die niet in de tabel vermeld zijn,
neemt u contact op met de service-afdeling.
WAARSCHUWING! We raden u aan
het apparaat niet te gebruiken, totdat
het probleem volledig is opgelost. Haal
de stekker uit het stopcontact en sluit
het apparaat pas weer aan als u zeker
weet dat het correct werkt.
DE WAS- EN DROOGRESULTATEN ZIJN NIET NAAR TEVREDENHEID
Probleem Mogelijke oorzaak en oplossing
Slechte wasresultaten. Raadpleeg "Dagelijks gebruik", "Aanwijzingen en tips"
en de folder voor het laden van de korf.
Gebruik intensievere wasprogramma´s.
Maak de inspuiters van de sproeiarm en het filter schoon. Zie
"Onderhoud en reiniging".
Slechte droogresultaten. Serviesgoed heeft te lang in het gesloten apparaat gestaan.
Het glansmiddel is op of de dosering van glansmiddel is niet
voldoende. Stel de dosering van het glansmiddel in op een
hogere stand.
Plastic voorwerpen moeten mogelijk met een doek worden
afgedroogd.
Activeer voor de beste droogprestatie AirDry.
We raden aan altijd glansmiddel te gebruiken, zelfs in combi-
natie met wastabletten.
19
Probleem Mogelijke oorzaak en oplossing
Witte strepen of een blauwe
waas op glazen en serviesgoed.
De vrijgegeven hoeveelheid glansmiddel is te hoog. Zet de
dosering van het glansmiddel op een lagere stand.
Er is te veel vaatwasmiddel gebruikt.
Vlekken en opgedroogde water-
vlekken op glazen en servies.
De vrijgegeven hoeveelheid glansmiddel is te laag. Zet de
dosering van het glansmiddel op een hogere stand.
De kwaliteit van het glansmiddel kan de oorzaak zijn.
Het serviesgoed is nat. Activeer voor de beste droogprestatie AirDry.
Het programma heeft geen droogfase of heeft een droogfase
met lage temperatuur.
Het glansmiddeldoseerbakje is leeg.
De kwaliteit van het glansmiddel kan de oorzaak zijn.
De kwaliteit van de multitabletten kan de oorzaak zijn. Pro-
beer een ander merk of activeer het glansmiddeldoseerbakje
en gebruik het glansmiddel samen met de multitabletten.
De binnenkant van het apparaat
is nat.
Dit is geen fout van het apparaat. Het wordt veroorzaakt door
de vochtigheid in de lucht die tegen de wanden condenseert.
Opvallend veel schuim tijdens
het wassen.
Gebruik alleen wasmiddel voor afwasautomaten.
Het glansmiddeldoseerbakje is lek. Neem contact op met de
klantenservice.
Roestresten op bestek. Er wordt voor het wassen teveel zout in het water gebruikt.
Zie 'De waterontharder instellen'.
Zilver en roestvrijstalen bestek zijn samen geplaatst. Zet zilve-
ren en roestvrijstalen voorwerpen niet dicht bij elkaar.
Er bevinden zich aan het einde
van het programma resten van
vaatwasmiddel in het vaatwas-
middeldoseerbakje.
De vaatwastablet raakte klem in het vaatwasmiddeldoseer-
bakje en is daardoor niet volledig weggespoeld door het wa-
ter.
Het water kan het vaatwasmiddel niet uit het vaatwasmiddel-
doseerbakje spoelen. Zorg ervoor dat de bovenste sproeiarm
niet geblokkeerd of verstopt is.
Zorg dat voorwerpen in de rekken het openen van het klepje
van het afwasmiddeldoseerbakje niet kunnen belemmeren.
Geuren in het apparaat. Raadpleeg "Reiniging binnenkant".
Kalkresten op het serviesgoed,
op de kuip en aan de binnenkant
van de deur.
Het zoutniveau is laag, controleer de bijvulaanduiding.
De dop van het zoutreservoir zit los.
U heeft hard kraanwater. Zie 'De waterontharder instel-
len'.
Gebruik zelfs met multitabletten zout en stel de wateronthar-
der in. Zie 'De waterontharder instellen'.
Indien de kalkaanslag blijft bestaan, reinigt u het apparaat
met reinigingsmiddelen die hier speciaal voor zijn bestemd.
Probeer een ander wasmiddel.
Neem contact op met de wasmiddelfabrikant.
Dof, ontkleurd of afgeschilverd
serviesgoed.
Zorg dat alleen vaatwasmachinebestendige voorwerpen in
het apparaat worden gewassen.
Laad de korf voorzichtig in en uit. Raadpleeg de folder voor
het laden van de korven.
Leg tere voorwerpen in de bovenkorf.
20
Raadpleeg "Voor het eerste
gebruik", "Dagelijks gebruik" of
"Aanwijzingen en tips" voor
mogelijke andere oorzaken.
TECHNISCHE INFORMATIE
Afmetingen Breedte / hoogte / diepte
(mm)
596 / 818 - 898 / 575
Elektrische aansluiting
1) Voltage (V) 220 - 240
Frequentie (Hz) 50
Watertoevoerdruk Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)
Watertoevoer
Koud water of warm water
2) max. 60 °C
Inhoud Couverts 13
Stroomverbruik Modus aan laten (W) 5.0
Uit-modus (W) 0.50
1) Zie het typeplaatje voor andere waarden.
2) Als het hete water door een alternatieve, milieuvriendelijkere energiebron geproduceerd wordt (bijv. zon-
nepanelen), gebruik dan een heetwatervoorziening om het energieverbruik te verminderen.
LINK NAAR DE EU-EPREL-DATABANK
De QR-code op het energielabel dat bij het
apparaat wordt geleverd, biedt een weblink naar de
registratie van dit apparaat in de EU-EPREL-
database. Bewaar het energielabel ter referentie
samen met de gebruikershandleiding en alle andere
documenten die bij dit apparaat worden geleverd.
Het is ook mogelijk om informatie gerelateerd aan
de prestaties van het product in de EU-EPREL-
databank te vinden via de link https://
eprel.ec.europa.eu en de modelnaam en het
productnummer kunt u vinden op het typeplaatje
van het apparaat. Zie het hoofdstuk
‘Productbeschrijving’.
Kijk voor meer informatie over het energielabel op
www.theenergylabel.eu
MILIEUBESCHERMING
Recycleer de materialen met het symbool . Gooi
de verpakking in een geschikte afvalcontainer om
het te recycleren. Bescherm het milieu en de
volksgezondheid en recycleer op een correcte
manier het afval van elektrische en elektronische
apparaten. Gooi apparaten gemarkeerd met het
symbool niet weg met het huishoudelijk afval.
Breng het product naar het milieustation bij u in de
buurt of neem contact op met de gemeente.
21
VISIT OUR WEBSITE TO:
Get usage advice, brochures, trouble shooter, service and repair information:
www.zanussi.com/support
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible for any
injuries or damage that are the result of incorrect installation or
usage. Always keep the instructions in a safe and accessible
location for future reference.
CHILDREN AND VULNERABLE PEOPLE SAFETY
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons with very
extensive and complex disabilities shall be kept away from the
appliance unless continuously supervised.
Children of less than 3 years of age should be kept away from
the appliance unless continuously supervised.
Do not let children play with the appliance.
Keep detergents away from children.
Keep children and pets away from the appliance when the door
is open.
Children shall not carry out cleaning and user maintenance of
the appliance without supervision.
GENERAL SAFETY
This appliance is intended to be used in household and similar
applications such as:
farm houses; staff kitchen areas in shops, offices and other
working environments;
by clients in hotels, motels, bed & breakfast and other
residential type environments.
22
Do not change the specification of this appliance.
The operating water pressure (minimum and maximum) must be
between 0.5 (0.05) / 8 (0.8) bar (MPa)
Follow the maximum number of 13 place settings.
If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
Put the cutlery in the cutlery basket with the sharp ends
pointing down or put them in the cutlery drawer in a horizontal
position with the sharp edges down.
Do not leave the appliance with the open door unattended to
avoid stepping accidentally onto it.
Before any maintenance operation, deactivate the appliance
and disconnect the mains plug from the socket.
Do not use high pressure water sprays and/or steam to clean
the appliance.
If the appliance has ventilation openings in the base, they must
not be covered e.g. by a carpet.
The appliance is to be connected to the water mains using the
new supplied hose-sets. Old hose sets must not be reused.
SAFETY INSTRUCTIONS
INSTALLATION
WARNING! Only a qualified person
must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Do not use the appliance before installing it in
the built-in structure due to safety manner.
Follow the installation instructions supplied with
the appliance.
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Do not install or use the appliance where the
temperature is less than 0 °C.
Install the appliance in a safe and suitable place
that meets installation requirements.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electric
shock.
The appliance must be earthed.
Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
Always use a correctly installed shockproof
socket.
Do not use multi-plug adapters and extension
cables.
Make sure not to cause damage to the mains
plug and to the mains cable. Should the mains
cable need to be replaced, this must be carried
out by our Authorised Service Centre.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
installation.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
23
This appliance is fitted with a 13 A mains plug. If
it is necessary to change the mains plug fuse,
use only a 13 A ASTA (BS 1362) fuse (UK and
Ireland only).
WATER CONNECTION
Do not cause damage to the water hoses.
Before connection to new pipes, pipes not used
for a long time, where repair work has been
carried out or new devices fitted (water meters,
etc.), let the water flow until it is clean and clear.
Ensure that there are no visible water leaks
during and after the first use of the appliance.
The water inlet hose has a safety valve and a
sheath with an inner mains cable.
WARNING! Dangerous voltage.
If the water inlet hose is damaged, immediately
close the water tap and disconnect the mains
plug from the mains socket. Contact the
Authorised Service Centre to replace the water
inlet hose.
USE
Do not put flammable products or items that are
wet with flammable products in, near or on the
appliance.
Dishwasher detergents are dangerous. Follow
the safety instructions on the detergent
packaging.
Do not drink and play with the water in the
appliance.
Do not remove the dishes from the appliance
until the programme is complete. Some
detergent may remain on the dishes.
Do not store items or apply pressure on the
open door of the appliance.
The appliance can release hot steam if you open
the door while a programme operates.
INTERNAL LIGHTING
WARNING! Risk of injury.
Concerning the lamp(s) inside this product and
spare part lamps sold separately: These lamps
are intended to withstand extreme physical
conditions in household appliances, such as
temperature, vibration, humidity, or are intended
to signal information about the operational
status of the appliance. They are not intended to
be used in other applications and are not
suitable for household room illumination.
To replace the internal lighting, contact the
Authorised Service Centre.
SERVICE
To repair the appliance contact the Authorised
Service Centre. Use original spare parts only.
Please note that self-repair or non-professional
repair can have safety consequences and might
void the guarantee.
The following spare parts will be available for 7
years after the model has been discontinued:
motor, circulation and drain pump, heaters and
heating elements, including heat pumps, piping
and related equipment including hoses, valves,
filters and aquastops, structural and interior
parts related to door assemblies, printed circuit
boards, electronic displays, pressure switches,
thermostats and sensors, software and firmware
including reset software. Please note that some
of these spare parts are only available to
professional repairers, and that not all spare
parts are relevant for all models.
The following spare parts will be available for 10
years after the model has been discontinued:
door hinge and seals, other seals, spray arms,
drain filters, interior racks and plastic peripherals
such as baskets and lids.
DISPOSAL
WARNING! Risk of injury or
suffocation.
Disconnect the appliance from the mains
supply.
Cut off the mains cable and discard it.
Remove the door catch to prevent children and
pets to get closed in the appliance.
24
PRODUCT DESCRIPTION
The graphics below is just a general
product overview. For more detailed
information, refer to other chapters
and/or documents provided with the
appliance.
4
3
7
9
8
10
56
11
1
2
1
Upper spray arm
2
Lower spray arm
3
Filters
4
Rating plate
5
Salt container
6
Air vent
7
Rinse aid dispenser
8
Detergent dispenser
9
Cutlery basket
10
Lower basket
11
Upper basket
25
CONTROL PANEL
1 32
456
1
Display
2
Indicators
3
On/off button / Reset button
4
Delay button
5
ECO programme button
6
Programme buttons
INDICATORS
Indicator Description
Drying phase indicator. It is on when you select a programme with the drying phase.
It flashes when the drying phase operates.
Salt indicator. It is on when the salt container needs refilling. It is always off while
the programme operates.
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. It is always
off while the programme operates.
Washing phase indicator. It is on when the washing phase operates.
Rinsing phase indicator. It is on when the rinsing phase operates.
PROGRAMMES
The numbering of the programmes in the table (P1,
P2, etc.) reflects their sequence on the control
panel.
The order of the programmes in the table may not
reflect their sequence on the control panel.
26
Programme
Degree of soil
Type of load
Programme phases
P1
ECO
1)
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
P2
Auto
2)
All
Crockery, cutlery, pots and
pans
Prewash
Wash from 50 - 60 °C
Rinses
Dry
P3
160 min
3)
Heavy soil
Crockery, cutlery, pots and
pans
Prewash
Wash 60 °C
Rinses
Dry
P4
90 min
4)
Normal soil
Crockery and cutlery
Prewash
Wash 60 °C
Rinses
Dry
P5
30 min
5)
Light soil
Crockery and cutlery
Wash 50 °C
Rinses
P6
Glass Care
6)
Normal or light soil
Delicate crockery and glass-
ware
Prewash
Wash 45 °C
Rinses
Dry
P7
Rinse Hold
7)
All Prewash
P0
Machine Care
8)
No load Self-cleaning
1) This programme offers the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. This is the standard programme for test institutes. This programme is used to assess
compliance with the Ecodesign Comission Regulation (EU) 2019/2022.
2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts
the temperature and the quantity of water, the energy consumption and the programme duration.
3) This programme is suitable for washing a load with mixed soil. Place items with heavy soil in the lower
basket and with normal soil in the upper basket. The pressure and temperature of the water in the lower
basket are higher than in the upper basket.
4) This programme is suitable for washing a load with normal soil.
5) This programme is suitable for washing a load or a half load with fresh soil. It gives good washing re-
sults in a short time.
6) This programme controls the temperature of the water to provide special care for delicate items, glass-
ware in particular.
7) With this programme, you can quickly rinse off food remains from dishes and prevent odours forming in
the appliance. Do not use detergent with this programme.
8) This programme is designed to clean the inside of the appliance effectively and efficiently. It removes
limescale and grease buildup. The programme should be run at least once every 2 months with a descaler
or a cleaning product designed for dishwashers and without any load.
27
CONSUMPTION VALUES
Programme
1)
2)
Water
(l)
Energy
(kWh)
Duration
(min)
P1
ECO
9.9
3)
/ 9.9
4)
0.821
3)
/ 0.835
4)
240
3)
/ 240
4)
P2
Auto
8.2 - 11.2 0.67 - 1.08 120 - 170
P3
160 min
9.2 - 11.2 0.96 - 1.08 160
P4
90 min
9.1 - 11.1 1.01 - 1.13 90
P5
30 min
9.4 - 11.4 0.57 - 0.69 30
P6
Glass Care
10.3 - 12.5 0.79 - 0.97 105
P7
Rinse Hold
3.7 - 4.5 0.02 - 0.05 15
P0
Machine Care
8.4 - 10.2 0.60 - 0.71 60
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) The values for programmes other than ECO are indicative only.
3) In accordance with the 1016/2010 regulation.
4) In accordance with the 2019/2022 regulation.
INFORMATION FOR TEST INSTITUTES
To receive the necessary information for conducting
performance tests (e.g. according to EN60436 ),
send an email to:
In your request, please include the product number
code (PNC) found on the rating plate.
For any other questions regarding your dishwasher,
please refer to the service book provided with your
appliance.
SETTINGS
PROGRAMME SELECTION MODE AND
USER MODE
When the appliance is in programme selection
mode it is possible to set a programme and to enter
user mode.
Settings available in the user mode:
The level of water softener according to the
water hardness.
Activation or deactivation of the rinse aid empty
notification.
Activation or deactivation of the AirDry.
As the appliance stores the saved settings,
there is no need to configure it before every
cycle.
How to set the programme selection mode
The appliance is in programme selection mode
when the display shows any programme number.
After activation, the appliance is in programme
selection mode and the programme P1 is selected
by default.
In other cases, set the programme selection mode
the following way:
28
If the programme was not started, switch
the appliance off and on.
If the programme or delay countdown is
running, press and hold the on/off button
for 3 seconds.
How to enter user mode
Make sure the appliance is in programme selection
mode.
To enter user mode, press and hold simultaneously
and until the indicators ,
and flash and the display shows - -.
THE WATER SOFTENER
The water softener removes minerals from the water
supply, which would have a negative effect on the
washing results and on the appliance.
The higher the content of these minerals, the harder
your water is. Water hardness is measured in
equivalent scales.
The water softener should be adjusted according to
the hardness of the water in your area. Your local
water authority can advise you on the hardness of
the water in your area. It is important to set the right
level of the water softener to assure good washing
results.
Water hardness
German degrees
(°dH)
French degrees
(°fH)
mmol/l
Clarke de-
grees
Water softener level
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1) Factory setting.
2) Do not use salt at this level.
Regardless of the type of detergent used, set
the proper water hardness level to keep the
salt refill indicator active.
Multi-tabs containing salt are not
effective enough to soften hard water.
Regeneration process
For the correct water softener operation, the resin
of the softener device needs to be regenerated
regularly. This process is automatic and is the part
of the normal dishwasher operation.
When the prescribed quantity of water (see values
in the table) has been used since the previous
regeneration process, a new regeneration process
will be initiated between the final rinse and the
programme end.
29
Water softener level Amount of water (l)
1 250
2 100
3 62
4 47
5 25
6 17
7 10
8 5
9 3
10 3
In case of the high water softener setting, it may
occur also in the middle of the programme, before
the rinse (twice during a programme). Regeneration
initiation has no impact on the cycle duration,
unless it occurs in the middle of a programme or at
the end of a programme with a short drying phase.
In that cases, the regeneration prolongs the total
duration of a programme by additional 5 minutes.
Subsequently, the rinsing of the water softener that
lasts 5 minutes may begin in the same cycle or at
the beginning of the next programme. This activity
increases the total water consumption of a
programme by additional 4 litres and the total
energy consumption of a programme by additional
2 Wh. The rinsing of the softener ends with a
complete drain.
Each performed softener rinse (possible more than
one in the same cycle) may prolong the programme
duration by another 5 minutes when it occurs at any
point at the beginning or in the middle of a
programme.
All the consumption values mentioned
in this section are determined in
accordance with the currently
applicable standard in laboratory
conditions with water hardness
2.5mmol/L according to the
2019/2022 regulation (water softener:
level 3).
The pressure and the temperature of
water as well as the variations of the
mains supply can change the values.
How to set the water softener level
Make sure the appliance is in user mode.
1. Press once.
The indicator continues to flash
and the remaining indicators are off.
The display shows the current setting: e.g.
= level 5.
2. Press repeatedly to change the setting.
Each pressing of increases the level
number. After reaching the level 10, the count
starts again from level 1.
3. Press the on/off button to confirm the setting.
THE RINSE AID EMPTY NOTIFICATION
The rinse aid helps to dry the dishes without
streaks and stains. It is automatically released
during the hot rinse phase.
When the rinse aid chamber is empty, the rinse aid
indicator is turned on notifying to refill rinse aid. If
the drying results are satisfactory while using multi-
tablets only, it is possible to deactivate the
notification for refilling rinse aid. However, for best
drying performance, always use rinse aid.
If standard detergent or multi-tablets without rinse
aid are used, activate the notification to keep the
rinse aid refill indicator active.
How to deactivate the rinse aid empty
notification
Makes sure the appliance is in user mode.
1. Press twice.
The indicator
continues to flash and the
remaining indicators are off.
The display shows the current setting.
= the rinse aid empty notification
is activated.
= the rinse aid empty notification
is activated.
2. Press to change the setting.
3. Press the on/off button to confirm the setting.
AIRDRY
AirDry improves the drying results. The appliance
door opens automatically during the drying phase
and remains ajar.
30
AirDry is automatically activated with all
programmes other than Rinse Hold (if applicable).
CAUTION! Do not try to close the
appliance door within 2 minutes after
automatic opening. This can cause
damage to the appliance.
CAUTION! If children have access to
the appliance, we advise to deactivate
AirDry. The automatic opening of the
door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press three times.
The indicator continues to flash and the
remaining indicators are off.
The display shows the current setting.
= AirDry is activated.
= AirDry is deactivated.
2. Press to change the setting.
3. Press the on/off button to confirm the setting.
BEFORE FIRST USE
1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
Do not use detergent and do not put dishes in
the baskets.
After starting the programme, the appliance
recharges the resin in the water softener for up to 5
minutes. The washing phase starts only after this
procedure is complete. The procedure is repeated
periodically.
THE SALT CONTAINER
CAUTION! Use rough salt designed
for dishwashers only. Fine salt
increases the risk of corrosion.
The salt is used to recharge the resin in the water
softener and to assure good washing results in
daily use.
HOW TO FILL THE SALT CONTAINER
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container (only for
the first time).
3. Fill the salt container with 1 kg of salt (until it is
full).
4. Carefully shake the funnel by its handle to get
the last granules inside.
5. Remove the salt around the opening of the salt
container.
6. Turn the cap of the salt container clockwise to
close the salt container.
31
CAUTION! Water and salt can come
out of the salt container when you fill
it. After you fill the salt container,
immediately start a programme to
prevent corrosion.
HOW TO FILL THE RINSE AID DISPENSER
M
A
X
1
2
3
4
+
-
A B
D
C
CAUTION! Only use rinse aid
designed specifically for dishwashers.
1. Press the release button (D) to open the lid
(C).
2. Fill the dispenser (A) until the rinse aid reaches
the marking ''MAX''.
3. Remove the spilled rinse aid with an absorbent
cloth to prevent excessive foam formation.
4. Close the lid. Make sure that the release button
locks into position.
You can turn the selector of the
released quantity (B) between position
1 (lowest quantity) and position 4 or 6
(highest quantity).
DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in programme
selection mode.
If the salt indicator is on, fill the salt
container.
If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the
type of load and the degree of soil.
USING THE DETERGENT
20
30
A
B
C
CAUTION! Only use detergent
specifically designed for dishwashers.
1. Press the release button (B) to open the lid (C).
2. Put the detergent, in powder or tablets, in the
compartment (A).
3. If the programme has a prewash phase, put a
small quantity of detergent on the inner part of
the appliance door.
4. Close the lid. Make sure that the release button
locks into position.
SETTING AND STARTING A PROGRAMME
The Auto Off function
This function decreases energy consumption by
deactivating automatically the appliance when it is
not operating.
The function comes into operation:
When the programme is complete.
After 5 minutes if a programme was not started.
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
appliance. Make sure that the appliance is in
programme selection mode.
3. Press repeatedly
or until the display
shows the number of the chosen programme.
32
The display shows the programme number for
approximately 3 seconds and then the
programme duration.
4. Close the appliance door to start the
programme.
Starting a programme with delay start
1. Set a programme.
2. Press the delay button repeatedly until the
display shows the desired delay time (from 1 to
24 hours).
The indicator is on.
3. Close the appliance door to start the
countdown.
During the countdown, it is possible to change the
delay time but not to change the programme
selection.
When the countdown is complete, the programme
starts and the indicator of the running phase is on.
The indicator is off.
Opening the door while the appliance
operates
Opening the door while a programme is running
stops the appliance. It may affect the energy
consumption and the programme duration. After
closing the door, the appliance continues from the
point of interruption.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by AirDry
function.
Do not try to close the appliance door
within 2 minutes after AirDry
automatically opens it as this may
cause damage to the appliance.
If, afterwards, the door is closed for at
least 3 minutes, the running
programme ends.
Cancelling the delay start
Press the on/off button for 3 seconds until the
appliance is in programme selection mode.
When you cancel the delay start, you have to set
the programme again.
Cancelling the programme
Press and hold the on/off button for 3 seconds until
the appliance is in programme selection mode.
Make sure that there is detergent in the detergent
dispenser before you start a new programme.
End of the programme
When the programme is complete, the Auto Off
function switches the appliance off automatically.
All buttons are inactive except for the on/off button.
Close the water tap.
HINTS AND TIPS
GENERAL
Follow the hints below to ensure optimal cleaning
and drying results in daily use and to protect the
environment.
Washing dishes in the dishwasher as instructed
in the user manual usually consumes less water
and energy than washing dishes by hand.
Load the dishwasher to its full capacity to save
water and energy. For best cleaning results,
arrange items in the baskets as instructed in the
user manual and do not overload the baskets.
Do not pre-rinse dishes by hand. It increases
the water and energy consumption. When
needed, select a programme with a prewash
phase.
Remove larger residues of food from the dishes
and empty cups and glasses before putting
them inside the appliance.
Soak or slightly scour cookware with firmly
cooked-on or baked-on food before washing it
in the appliance.
Make sure that items in the baskets do not
touch or cover each other. Only then can the
water completely reach and wash the dishes.
You can use dishwasher detergent, rinse aid
and salt separately or you can use the multi-
tablets (e.g. ''All in 1''). Follow the instructions
on the packaging.
Select a programme according to the type of
load and the degree of soil. ECO offers the
most efficient use of water and energy
consumption.
To prevent limescale buildup inside the
appliance:
Refill the salt container whenever
necessary.
33
Use the recommended dosage of the
detergent and rinse aid.
Make sure that the current level of the water
softener agrees with the hardness of the
water supply.
Follow the instructions in the chapter "Care
and cleaning".
USING SALT, RINSE AID AND DETERGENT
Only use salt, rinse aid and detergent designed
for dishwasher. Other products can cause
damage to the appliance.
In areas with hard and very hard water, we
recommend to use basic dishwasher detergent
(powder, gel, tablets containing no additional
agents), rinse aid and salt separately for optimal
cleaning and drying results.
Detergent tablets do not fully dissolve with short
programmes. To prevent detergent residues on
the tableware, we recommend that you use
tablets with long programmes.
Always use the correct quantity of detergent.
Insufficient dosage of detergent can result in
poor cleaning results and hard-water filming or
spotting on the items. Using too much detergent
with soft or softened water results in detergent
residues on the dishes. Adjust the amount of
detergent based on the water hardness. Refer
to the instructions on the detergent packaging.
Always use the correct quantity of rinse aid.
Insufficient dosage of rinse aid decreases the
drying results. Using too much rinse aid results
in bluish layers on the items.
Make sure that the water softener level is
correct. If the level is too high, the increased
quantity of salt in the water might result in rust
on cutlery.
WHAT TO DO IF YOU WANT TO STOP USING
MULTI-TABLETS
Before you start to use separately detergent, salt
and rinse aid do the following procedure.
1. Set the highest level of the water softener.
2. Make sure that the salt and rinse aid containers
are full.
3. Start the shortest programme with a rinsing
phase. Do not add detergent and do not load
the baskets.
4. When the programme is completed, adjust the
water softener according to the water hardness
in your area.
5. Adjust the released quantity of rinse aid.
LOADING THE BASKETS
Always use the whole space of the baskets.
Use the appliance to wash dishwasher-safe
items only.
Do not wash in the appliance items made of
wood, horn, aluminium, pewter and copper as
they could crack, warp, get discoloured or
pitted.
Do not wash in the appliance items that can
absorb water (sponges, household cloths).
Put hollow items (cups, glasses and pans) with
the opening facing downwards.
Make sure that glasses do not touch each other.
Put light items in the upper basket. Make sure
that the items do not move freely.
Put cutlery and small items in the cutlery basket.
Make sure that the spray arms can move freely
before you start a programme.
BEFORE STARTING A PROGRAMME
Before you start the selected programme, make
sure that:
The filters are clean and correctly installed.
The cap of the salt container is tight.
The spray arms are not clogged.
There is enough salt and rinse aid (unless you
use multi-tablets).
The arrangement of the items in the baskets is
correct.
The programme is suitable to the type of load
and the degree of soil.
The correct quantity of detergent is used.
UNLOADING THE BASKETS
1. Let the tableware cool down before you
remove it from the appliance. Hot items can be
easily damaged.
2. First remove items from the lower basket, then
from the upper basket.
After the programme is completed,
water can still remain on the inside
surfaces of the appliance.
34
CARE AND CLEANING
WARNING! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the
main socket.
Dirty filters and clogged spray arms
decrease the washing results. Make a
check regularly and, if necessary, clean
them.
CLEANING THE FILTERS
The filter system is made of 3 parts.
C
B
A
1. Turn the filter (B) counterclockwise and remove
it.
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5. Make sure that there are no residues of food or
soil in or around the edge of the sump.
6. Put back in place the flat filter (A). Make sure
that it is correctly positioned under the 2
guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter (A). Turn it
clockwise until it locks.
35
CAUTION! An incorrect position of
the filters can cause bad washing
results and damage to the appliance.
CLEANING THE LOWER SPRAY ARM
We recommend to clean the lower spray arm
regularly to prevent soil from clogging the holes.
Clogged holes can cause unsatisfactory washing
results.
1. To remove the lower spray arm, pull it upwards.
2. Wash the spray arm under running water. Use
a thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes.
3. To install the spray arm back, press it
downwards.
EXTERNAL CLEANING
Clean the appliance with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive cleaning
pads or solvents.
INTERNAL CLEANING
Carefully clean the appliance, including the
rubber gasket of the door, with a soft damp
cloth.
To maintain the performance of your appliance,
use a cleaning product designed specifically for
dishwashers at least once a month. Carefully
follow the instructions on the packaging of the
product.
Do not use abrasive products, abrasive cleaning
pads, sharp tools, strong chemicals, scourer or
solvents.
Using short-duration programmes regularly can
cause grease and limescale buildup inside the
appliance. Run long-duration programmes at
least twice a month to prevent the buildup.
REMOVAL OF FOREIGN OBJECTS
Check the filters and the sump after each use of the
dishwasher. Foreign objects (e.g. pieces of glass,
plastic, bones or toothpicks, etc) decrease the
cleaning performance and can cause damage to
the drain pump.
1. Disassemble the filters system as instructed in
this chapter.
2. Remove any foreign objects by hand.
CAUTION! If unable to remove the
objects, contact an Authorised
Service Centre.
3. Reassemble the filters as instructed in this
chapter.
36
TROUBLESHOOTING
WARNING! Improper repair of the
appliance may pose a danger to the
safety of the user. Any repairs must be
performed by qualified personnel.
The majority of problems that may occur can
be solved without the need to contact an
Authorised Service Centre.
Refer to the below table for information on possible
problems.
With some problems, the display shows an alarm
code.
Problem and alarm code Possible cause and solution
You cannot activate the appli-
ance.
Make sure that the mains plug is connected to the mains sock-
et.
Make sure that there is no damaged fuse in the fuse box.
The programme does not start. Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or wait for the end of
the countdown.
The appliance recharges the resin inside the water softener.
The duration of the procedure is approximately 5 minutes.
The appliance does not fill with
water.
The display shows i10 or i11.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low.
For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clogged.
Make sure that the inlet hose has no kinks or bends.
The appliance does not drain
the water.
The display shows i20.
Make sure that the sink spigot is not clogged.
Make sure that the interior filter system is not clogged.
Make sure that the drain hose has no kinks or bends.
The anti-flood device is on.
The display shows i30.
Close the water tap.
Make sure that the appliance is correctly installed.
Make sure the baskets are loaded as instructed in the user
manual.
Malfunction of the water level
detection sensor.
The display shows i41 - i44.
Make sure that the filters are clean.
Switch the appliance off and on.
Malfunction of the wash pump
or the drain pump.
The display shows i51 - i59 or
i5A - i5F.
Switch the appliance off and on.
The temperature of the water
inside the appliance is too high
or malfunction of the tempera-
ture sensor occurred.
The display shows i61 or i69.
Make sure that the temperature of the inlet water does not ex-
ceed 60°C.
Switch the appliance off and on.
37
Problem and alarm code Possible cause and solution
Technical malfunction of the
appliance.
The display shows iC0 or iC3.
Switch the appliance off and on.
The level of water inside the
appliance is too high.
The display shows iF1.
Switch the appliance off and on.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right height
above the floor. Refer to the installation instructions.
The appliance stops and starts
more times during operation.
It is normal. It provides optimal cleaning results and energy sav-
ings.
The programme lasts too long. If the delayed start option is set, cancel the delay setting or wait
for the end of the countdown.
The remaining time in the dis-
play increases and skips nearly
to the end of programme time.
This is not a defect. The appliance is working correctly.
Small leak from the appliance
door.
The appliance is not levelled. Loosen or tighten the adjustable
feet (if applicable).
The appliance door is not centred on the tub. Adjust the rear
foot (if applicable).
The appliance door is difficult
to close.
The appliance is not levelled. Loosen or tighten the adjustable
feet (if applicable).
Parts of the tableware are protruding from the baskets.
Rattling/knocking sounds from
inside the appliance.
The tableware is not properly arranged in the baskets. Refer to
basket loading leaflet.
Make sure that the spray arms can rotate freely.
The appliance trips the circuit-
beaker.
The amperage is insufficient to supply simultaneously all the ap-
pliances in use. Check the socket amperage and the capacity
of the meter or turn off one of the appliances in use.
Internal electrical fault of the appliance. Contact an Authorised
Service Centre.
Refer to "Before first use", "Daily
use", or "Hints and tips" for other
possible causes.
Once you have checked the appliance, deactivate
and activate the appliance. If the problem occurs
again, contact an Authorised Service Centre.
For alarm codes not described in the table, contact
an Authorised Service Centre.
WARNING! We do not recommend
using the appliance until the problem
has been completely fixed. Unplug the
appliance and do not plug it in again
until you are certain that it operates
correctly.
38
THE WASHING AND DRYING RESULTS ARE NOT SATISFACTORY
Problem Possible cause and solution
Poor washing results. Refer to "Daily use", "Hints and tips" and basket loading
leaflet.
Use more intensive washing programmes.
Clean spray arm jets and filter. Refer to "Care and Clean-
ing".
Poor drying results. Tableware has been left for too long inside a closed appli-
ance.
There is no rinse aid or the dosage of rinse aid is not enough.
Set the rinse aid dispenser to a higher level.
Plastic items may need to be towel dried.
For the best drying performance activate AirDry.
We recommend to always use rinse aid, even in combination
with multi-tablets.
There are whitish streaks or blu-
ish layers on glasses and dishes.
The release quantity of rinse aid is too much. Adjust the rinse
aid level to a lower level.
The quantity of detergent is too much.
There are stains and dry water
drops on glasses and dishes.
The released quantity of rinse aid is not sufficient. Adjust the
rinse aid level to a higher level.
The quality of the rinse aid can be the cause.
The dishes are wet. For the best drying performance activate AirDry.
The programme does not have a drying phase or has a drying
phase with low temperature.
The rinse aid dispenser is empty.
The quality of the rinse aid can be the cause.
The quality of the multi-tablets can be the cause. Try a differ-
ent brand or activate the rinse aid dispenser and use rinse
aid and multi-tablets together.
The interior of the appliance is
wet.
This is not a defect of the appliance. it is caused by the hu-
midity in the air that condenses on the walls.
Unusual foam during washing. Use the detergent for dishwashers only.
There is a leak in the rinse aid dispenser. Contact an Author-
ised Service Centre.
Traces of rust on cutlery. There is too much salt in the water used for washing. Refer to
"The water softener".
Silver and stainless steel cutlery were placed together. Avoid
to put silver and stainless steel items close together.
There are residues of detergent
in the dispenser at the end of the
programme.
The detergent tablet got stuck in the dispenser and therefore
was not completely washed away by water.
Water cannot wash away the detergent from the dispenser.
Make sure that the spray arm is not blocked or clogged.
Make sure that items in the baskets do not impede the lid of
the detergent dispenser from opening.
Odours inside the appliance. Refer to "Internal cleaning".
39
Problem Possible cause and solution
Limescale deposits on the table-
ware, on the tub and on the in-
side of the door.
The level of salt is low, check the refill indicator.
The cap of the salt container is loose.
Your tap water is hard. Refer to "The water softener".
Even using multi-functional tabs use salt and set regeneration
of the water softener. Refer to "The water softener".
If lime scale deposits still remain, clean the appliance with
appliance cleaners which are particularly suitable for this pur-
pose.
Try different detergent.
Contact the detergent manufacturer.
Dull, discoloured or chipped ta-
bleware.
Make sure that only dishwasher-safe items are washed in the
appliance.
Load and unload the basket carefully. Refer to basket loading
leaflet.
Place delicate items in the upper basket.
Refer to "Before first use", "Daily
use" or "Hints and tips" for other
possible causes.
TECHNICAL INFORMATION
Dimensions Width / height / depth (mm) 596 / 818 - 898 / 575
Electrical connection
1) Voltage (V) 220 - 240
Frequency (Hz) 50
Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)
Water supply
Cold water or hot water
2) max 60 °C
Capacity Place settings 13
Power consumption Left-on mode (W) 5.0
Off-mode (W) 0.50
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to
decrease energy consumption.
LINK TO THE EU EPREL DATABASE
The QR code on the energy label supplied with the
appliance provides a web link to the registration of
this appliance in the EU EPREL database. Keep
the energy label for reference together with the
user manual and all other documents provided with
this appliance.
It is possible to find information related to the
performance of the product in the EU EPREL
database using the link https://eprel.ec.europa.eu
and the model name and product number that you
can find on the rating plate of the appliance. Refer
to the chapter "Product description".
For more detailed information about the energy
label, visit www.theenergylabel.eu.
40
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the
packaging in relevant containers to recycle it. Help
protect the environment and human health by
recycling waste of electrical and electronic
appliances. Do not dispose of appliances marked
with the symbol with the household waste.
Return the product to your local recycling facility or
contact your municipal office.
41
*
WWW.ZANUSSI.COM/SHOP
156948181-A-422020
1 / 1

Zanussi ZDSN653X ORBITCLEAN de handleiding

Categorie
Vaatwassers
Type
de handleiding
Deze handleiding is ook geschikt voor

Gerelateerde artikelen