AEG FFB62407ZM Handleiding

Categorie
Vaatwassers
Type
Handleiding
USER
MANUAL
NL Gebruiksaanwijzing 2
Afwasautomaat
EN User Manual 30
Dishwasher
FFB62407ZM
INHOUDSOPGAVE
1. VEILIGHEIDSINFORMATIE................................................................................. 2
2. VEILIGHEIDSVOORSCHRIFTEN........................................................................ 4
3. PRODUCTBESCHRIJVING..................................................................................6
4. BEDIENINGSPANEEL..........................................................................................8
5. PROGRAMMA’S...................................................................................................9
6. OPTIES...............................................................................................................11
7. INSTELLINGEN.................................................................................................. 12
8. VOOR HET EERSTE GEBRUIK.........................................................................16
9. DAGELIJKS GEBRUIK....................................................................................... 17
10. AANWIJZINGEN EN TIPS................................................................................18
11. ONDERHOUD EN REINIGING.........................................................................20
12. PROBLEEMOPLOSSING.................................................................................24
13. TECHNISCHE INFORMATIE............................................................................28
VOOR PERFECTE RESULTATEN
Bedankt dat u voor dit AEG-product heeft gekozen. Dit apparaat is ontworpen om
vele jaren uitstekend te presteren, met innovatieve technologieën die het leven
gemakkelijker helpen maken – functies die gewone apparaten wellicht niet
hebben. Neem een paar minuten de tijd om het door te lezen zodat u er optimaal
van kunt profiteren.
Ga naar onze website voor:
Advies over gebruik, brochures, het oplossen van problemen, onderhouds- en
reparatie-informatie:
www.aeg.com/support
Registreer uw product voor een betere service:
www.registeraeg.com
Koop accessoires, verbruiksartikelen en originele reserveonderdelen voor uw
apparaat:
www.aeg.com/shop
KLANTENSERVICE
Gebruik altijd originele onderdelen.
Als u contact opneemt met de klantenservice zorg dat u de volgende gegevens
bij de hand hebt: Model, productnummer, serienummer.
De informatie staat op het typeplaatje.
Waarschuwing / Belangrijke veiligheidsinformatie
Algemene informatie en tips
Milieu‑informatie
Wijzigingen voorbehouden.
1. VEILIGHEIDSINFORMATIE
Lees zorgvuldig de meegeleverde instructies voor
installatie en gebruik van het apparaat. De fabrikant is
www.aeg.com2
niet verantwoordelijk voor verwondingen of schade die
voortvloeit uit de onjuiste installatie of het onjuiste
gebruik. Bewaar de instructies altijd op een veilige,
toegankelijke plek voor toekomstig gebruik.
1.1 Veiligheid van kinderen en kwetsbare
mensen
Dit apparaat kan worden gebruikt door kinderen van 8
jaar en ouder en door mensen met beperkte
lichamelijke, zintuiglijke of verstandelijke vermogens of
een gebrek aan ervaring en kennis, indien zij onder
toezicht staan of instructies hebben gekregen over het
veilig gebruiken van het apparaat en indien zij de
eventuele gevaren begrijpen.
Kinderen tussen de 3 en 8 jaar oud en personen met
zware en complexe beperkingen dienen altijd uit de
buurt van het apparaat te worden gehouden, tenzij ze
voortdurend onder toezicht staan.
Kinderen jonger dan 3 jaar dienen, mits zij
voortdurend onder toezicht staan, bij het apparaat uit
de buurt te worden gehouden.
Laat kinderen niet met het apparaat spelen.
Houd reinigingsmiddelen uit de buurt van kinderen.
Houd kinderen en huisdieren uit de buurt van het
apparaat als de deur open is.
Kinderen mogen zonder toezicht geen reinigings- en
onderhoudswerkzaamheden aan het apparaat
uitvoeren.
1.2 Algemene veiligheid
Dit apparaat is bedoeld voor gebruik in huishoudelijke
en soortgelijke toepassingen, zoals:
boerderijen; personeelskeukens in winkels,
kantoren of andere werkomgevingen;
door gasten in hotels, motels, bed&breakfasts- en
andere woonomgevingen.
De specificatie van dit apparaat niet wijzigen.
NEDERLANDS 3
De waterdruk (minimaal en maximaal) moet liggen
tussen 0.5 (0.05) / 8 (0.8) bar (MPa)
Volg het maximale aantal 9 plaatsen.
Als de voedingskabel beschadigd is, moet de
fabrikant, een erkende serviceverlener of een
gekwalificeerd persoon deze vervangen teneinde
gevaarlijke situaties te voorkomen.
Leg het bestek in de besteklade met de scherpe
randen naar beneden of leg ze horizontaal in de
besteklade met de scherpe randen naar beneden.
Laat om ongelukken te voorkomen het apparaat niet
onbeheerd achter met open deur.
Schakel het apparaat uit en trek de stekker uit het
stopcontact voordat u onderhoudshandelingen
verricht.
Gebruik geen waterstralen onder druk en/of stoom om
het apparaat te reinigen.
Als het apparaat is voorzien van ventilatieopeningen
in de basis, mogen deze niet worden afgedekt met
bijv. een vloerkleed.
Het apparaat moet met de nieuwe slangset worden
aangesloten op een kraan. Oude slangsets mogen
niet opnieuw worden gebruikt.
2. VEILIGHEIDSVOORSCHRIFTEN
2.1 Installatie
WAARSCHUWING!
Alleen een erkende
installatietechnicus mag het
apparaat installeren.
Verwijder alle verpakkingsmaterialen.
Installeer en gebruik geen beschadigd
apparaat.
Volg de installatie-instructies die zijn
meegeleverd met het apparaat.
Pas altijd op bij verplaatsing van het
apparaat, want het is zwaar. Gebruik
altijd veiligheidshandschoenen en
gesloten schoeisel.
Installeer of gebruik het apparaat niet
op een plek waar de temperatuur
onder de 0 °C komt.
Installeer het apparaat op een veilige
en geschikte plaats die aan alle
installatie-eisen voldoet.
2.2 Elektrische aansluiting
WAARSCHUWING!
Gevaar voor brand en
elektrische schokken.
Dit apparaat moet worden
aangesloten op een geaard
stopcontact.
Zorg ervoor dat de parameters op het
vermogensplaatje overeenkomen met
elektrische vermogen van de
netstroom.
Gebruik altijd een juist geïnstalleerd
schokbestendig stopcontact.
www.aeg.com4
Gebruik geen adapters met meerdere
stekkers en verlengkabels.
Zorg dat u de netstekker en het
netsnoer niet beschadigt. Indien de
voedingskabel moet worden
vervangen, dan moet dit gebeuren
door onze Klantenservice.
Steek de stekker pas in het
stopcontact als de installatie is
voltooid. Zorg ervoor dat het netsnoer
na installatie bereikbaar is.
Trek niet aan het netsnoer om het
apparaat los te koppelen. Trek altijd
aan de stekker.
Dit apparaat is voorzien van een 13 A
stekker. Als de zekering van de
stekker vervangen moet worden,
moet een ASTA (BS 1362)-zekering
van 13-ampère worden gebruikt
(uitsluitend VK en Ierland).
2.3 Wateraansluiting
Beschadig de waterslangen niet.
Indien buizen lang niet zijn gebruikt,
er reparaties hebben plaatsgevonden
of er nieuwe apparaten zijn geplaatst
(watermeters, enz.), moet u, voordat
de nieuwe buizen worden
aangesloten, het water laten stromen
tot het schoon en helder is.
Zorg ervoor dat er geen zichtbare
waterlekken zijn tijdens en na het
eerste gebruik van het apparaat.
De watertoevoerslang heeft een
veiligheidsventiel en een omhulsel
met een hoofdkabel aan de
binnenkant.
WAARSCHUWING!
Gevaarlijke spanning.
Als de watertoevoerslang beschadigd
is, sluit dan onmiddellijk de
waterkraan en haal de stekker uit het
stopcontact. Neem contact op met de
service-afdeling om de
watertoevoerslang te vervangen.
2.4 Gebruik
Plaats geen ontvlambare producten of
items die vochtig zijn door
ontvlambare producten in, bij of op
het apparaat.
Vaatwasmiddel is gevaarlijk. Volg de
veiligheidsinstructies op de
verpakking van het wasmiddel op.
Speel niet met het water van het
apparaat en drink het niet op.
Verwijder de borden pas uit het
apparaat als het programma is
voltooid. Er kan wat wasmiddel op de
vaat achterblijven.
Bewaar geen voorwerpen en oefen
geen druk uit op de open deur van het
apparaat.
Het apparaat kan hete stoom laten
ontsnappen als u de deur opent terwijl
er een programma wordt uitgevoerd.
2.5 Binnenverlichting
WAARSCHUWING!
Gevaar voor letsel.
Met betrekking tot de lamp(en) in dit
product en reservelampen die
afzonderlijk worden verkocht: Deze
lampen zijn bedoeld om bestand te
zijn tegen extreme fysieke
omstandigheden in huishoudelijke
apparaten, zoals temperatuur,
trillingen, vochtigheid, of zijn bedoeld
om informatie te geven over de
operationele status van het apparaat.
Ze zijn niet bedoeld voor gebruik in
andere toepassingen en zijn niet
geschikt voor verlichting in
huishoudelijke ruimten.
Neem contact op met het service-
centrum om de binnenverlichting te
vervangen.
2.6 Service
Neem contact op met de erkende
servicedienst voor reparatie van het
apparaat. Gebruik uitsluitend originele
reserveonderdelen.
Houd er rekening mee dat
zelfreparatie of niet-professionele
reparatie gevolgen kan hebben voor
NEDERLANDS 5
de veiligheid en de garantie kan doen
vervallen.
De volgende reserveonderdelen zijn
beschikbaar gedurende 7 jaar nadat
het model is stopgezet: motor,
circulatie- en afvoerpomp,
verwarmingstoestellen en
verwarmingselementen, inclusief
warmtepompen, leidingen en
aanverwante apparatuur, waaronder
slangen, kleppen, filters en
aquastops, structurele en interne
onderdelen met betrekking tot
deurconstructies, printplaten,
elektronische displays,
drukschakelaars, thermostaten en
sensoren, software en firmware,
inclusief resetsoftware. Houd er
rekening mee dat sommige van deze
reserveonderdelen alleen beschikbaar
zijn voor professionele reparateurs en
dat niet alle reserveonderdelen
relevant zijn voor alle modellen.
De volgende reserveonderdelen
zullen beschikbaar zijn gedurende 10
jaar nadat het model is stopgezet:
deurscharnieren en -afdichtingen,
andere afdichtingen, spuitarmen,
afvoerfilters, binnenrekken en plastic
randapparatuur zoals manden en
deksels.
2.7 Verwijdering
WAARSCHUWING!
Gevaar voor letsel of
verstikking.
Haal de stekker uit het stopcontact.
Snij het netsnoer van het apparaat af
en gooi dit weg.
Verwijder de deurgreep om te
voorkomen dat kinderen en
huisdieren opgesloten raken in het
apparaat.
3. PRODUCTBESCHRIJVING
De afbeeldingen hieronder
geven alleen een algemeen
productoverzicht. Raadpleeg
voor meer gedetailleerde
informatie andere
hoofdstukken en/of
documenten die bij het
apparaat zijn meegeleverd.
www.aeg.com6
5
4
8
9
11 10
67
12
2
3
1
1
Aanrecht
2
Bovenste sproeiarmen
3
Onderste sproeiarm
4
Filters
5
Typeplaatje
6
Zoutreservoir
7
Ventilatie
8
Glansmiddeldoseerbakje
9
Vaatwasmiddeldoseerbakje
10
Bestekkorf
11
Onderste korf
12
Bovenste korf
NEDERLANDS 7
4. BEDIENINGSPANEEL
1
2 4 5
68
3
7
1
Aan/uit-toets
2
Program-toets
3
Programma-controlelampjes
4
Display
5
Delay-toets
6
Option-toets
7
Controlelampjes
8
Start-toets
4.1 Indicatielampjes
Indicatie‐
lampje
Beschrijving
Indicatielampje zout. Dit is aan als het zoutreservoir bijgevuld dient te wor‐
den. Het is altijd uit als het programma in werking is.
Indicatielampje glansspoelmiddel. Dit is aan als het glansspoelmiddeldo‐
seerbakje bijgevuld dient te worden. Het is altijd uit als het programma in
werking is.
Indicatielampje van wasfase. Dit is aan wanneer de wasfase loopt.
Indicatielampje spoelfase. Dit is aan wanneer de spoelfase loopt.
Indicatielampje droogfase. Dit is aan wanneer u een programma selec‐
teert met de droogfase. Het gaat knipperen wanneer de droogfase loopt.
Indicatielampje Delay. Gaat aan als u de starttijdkeuze inschakelt.
Indicatielampje GlassCare.
www.aeg.com8
Indicatie‐
lampje
Beschrijving
Indicatielampje ExtraPower.
Indicatielampje ExtraHygiene.
5. PROGRAMMA’S
De volgorde van de programma´s in de
tabel geeft mogelijk hun volgorde op het
bedieningspaneel niet weer.
Program‐
ma
Type lading Mate van be‐
vuiling
Programmafasen Opties
1)
Vaatwerk
Bestek
Potten
Pannen
Normaal
Licht aan‐
gekoekt
Voorspoelen
Wassen op 50 °C
Tussentijdse spoe‐
ling
Laatste spoeling
55 °C
Drogen
AirDry
ExtraPower
GlassCare
ExtraHygiene
160min
Vaatwerk
Bestek
Potten
Pannen
Normaal
tot zwaar
aange‐
koekt
Voorspoelen
Wassen op 60 °C
Tussentijdse spoe‐
ling
Laatste spoeling
60 °C
Drogen
AirDry
ExtraPower
GlassCare
ExtraHygiene
Vaatwerk
Bestek
Potten
Pannen
Normaal
Licht aan‐
gekoekt
Wassen op 60 °C
Tussentijdse spoe‐
ling
Laatste spoeling
55 °C
Drogen
AirDry
ExtraPower
GlassCare
ExtraHygiene
Vaatwerk
Bestek
Fris
Licht aan‐
gekoekt
Wassen op 60 °C
Tussentijdse spoe‐
ling
Laatste spoeling
50 °C
AirDry
ExtraPower
GlassCare
ExtraHygiene
NEDERLANDS 9
Program‐
ma
Type lading Mate van be‐
vuiling
Programmafasen Opties
Vaatwerk
Bestek
Fris Wassen op 50 °C
Tussentijdse spoe‐
ling
Laatste spoeling
50 °C
AirDry
ExtraPower
GlassCare
ExtraHygiene
2)
Vaatwerk
Bestek
Potten
Pannen
Het program‐
ma past zich
aan de vuil‐
graad aan.
Voorspoelen
Wassen 50 - 60 °C
Tussentijdse spoe‐
ling
Laatste spoeling
60 °C
Drogen
AirDry
ExtraHygiene
3)
Geen la‐
ding
Het program‐
ma reinigt de
binnenkant
van het appa‐
raat.
Wassen op 70 °C
Tussentijdse spoe‐
ling
Laatste spoeling
AirDry
4)
Alle soor‐
ten vaat
Alle vuil‐
graden
Voorspoelen
5)
Servies‐
goed en
bestek
Normale
bevuiling
Voorspoelen
Wassen op 58 °C
Tussentijdse spoe‐
ling
Laatste spoeling
60 °C
Drogen
AirDry
1)
Dit programma heeft het meest efficiënte water- en energieverbruik voor normaal vervuild serviesgoed
en bestek. Dit is het standaardprogramma voor testinstituten. Dit programma wordt gebruikt voor de be‐
oordeling van de naleving van Verordening (EU) 2019/2022 van de Commissie inzake ecologisch ont‐
werp.
2)
Het apparaat detecteert de vuilgraad en het aantal voorwerpen in de rekken. De temperatuur, de hoe‐
veelheid water, het energieverbruik en de programmaduur worden automatisch aangepast.
3)
Dit programma is ontworpen om de binnenkant van het apparaat effectief en efficiënt te reinigen. Het
verwijdert kalkaanslag en vetresten. Het programma dient minstens iedere 2 maanden zonder vaat te
worden gedraaid met een ontkalker of een vaatwasserreiniger.
4)
Met dit programma kunt u voedselresten snel van de vaat afspoelen om zo geurvorming in het appa‐
raat te voorkomen. Gebruik geen vaatwasmiddel bij dit programma.
5)
Dit is het meest stille programma. De waspomp werkt op een zeer lage snelheid zodat het apparaat
minder geluid maakt. Door de lage snelheid duurt het programma lang.
www.aeg.com10
5.1 Verbruikswaarden
Programma
1)
2)
Water (l) Energieverbruik
(kWh)
Duur (min)
9.9
3)
/ 9.9
4)
0.689
3)
/ 0.704
4)
240
3)
/ 240
4)
160min
8.8 - 10.8 0.854 - 1.043 160
8.5 - 10.4 0.743 - 0.909 90
8.2 - 10 0.628 - 0.767 60
7.9 - 9.7 0.543 - 0.664 30
8.0 - 10.7 0.683 - 1.047 120 - 170
7.4 - 8.9 0.396 - 0.484 60
2.8 - 3.4 0.011 - 0.014 15
8.5 - 10.3 0.679 - 0.839 248
1)
De druk en temperatuur van het water, de variaties in stroomtoevoer, de opties, de hoeveelheid vaat
en mate van vervuiling kunnen de verbruikswaarden veranderen.
2)
De waarden van de programma’s, behalve voor ECO, zijn slechts een indicatie.
3)
Conform verordening 1016/2010.
4)
Conform verordening 2019/2022.
5.2 Aanwijzingen voor
testinstituten
Om de nodige informatie te ontvangen
over het uitvoeren van prestatietesten
(bijv. volgens EN60436 ), stuurt u een e-
mail naar:
Vermeld in uw verzoek de
productnummercode (PNC) dat u op het
typeplaatje aantreft.
Raadpleeg voor andere vragen
betreffende uw vaatwasmachine het
serviceboekje dat met uw apparaat is
meegeleverd.
6. OPTIES
De gewenste opties moeten
elke keer dat u een
programma start worden
geactiveerd.
De opties kunnen niet
worden in- of uitgeschakeld
als een programma in
werking is.
De knop Option schakelt
tussen de beschikbare
opties en hun mogelijke
combinaties.
NEDERLANDS 11
Niet alle opties kunnen met
elkaar worden
gecombineerd. Als u opties
hebt geselecteerd die niet
met elkaar te combineren
zijn, dan schakelt het
apparaat automatisch één of
meerdere opties uit. Alleen
de indicatielampjes van de
actieve opties zijn aan.
Als een optie niet van
toepassing is op een
programma, dan gaat het
bijbehorende indicatielampje
niet branden of het knippert
even en gaat dan uit.
Het activeren van opties kan
van invloed zijn zowel op het
water- en energieverbruik,
als op de programmaduur.
6.1 GlassCare
Deze optie biedt speciale zorg voor een
delicate lading. De optie voorkomt snelle
wijzigingen in de wastemperatuur van
het gekozen programma en verlaagt het
naar 45 °C. Dit behoedt in het bijzonder
glaswerk tegen beschadiging.
GlassCare inschakelen
Druk op Option totdat het indicatielampje
aan is.
Het display geeft de bijgewerkte
programmaduur weer.
6.2 ExtraPower
Deze optie verbetert de wasresultaten
van het geselecteerde programma. De
optie verhoogt de wastemperatuur en
verlengt de duur.
Activeren ExtraPower
Druk op Option tot het lampje aan
is.
Het display geeft de bijgewerkte
programmaduur weer.
6.3 ExtraHygiene
Deze optie zorgt voor meer hygiënische
resultaten door de temperatuur tijdens de
laatste spoelfase gedurende minstens 10
minuten tussen 65 °C en 70 °C te
houden.
Het activeren van
ExtraHygiene
Druk op Option totdat het -
indicatielampje aangaat.
Het display geeft de bijgewerkte
programmaduur weer.
7. INSTELLINGEN
7.1 Programmakeuzemodus
en gebruikersmodus
Als het apparaat in de
programmakeuzemodus staat, kan een
programma worden ingesteld en de
gebruikersmodus worden ingevoerd.
Instellingen beschikbaar in de
gebruikersmodus:
Het niveau van de waterverzachter
afgestemd op de waterhardheid.
Het niveau van het glansmiddel
volgens de benodigde dosering.
De activering of deactivering van de
AirDry.
Het apparaat slaat de instellingen op,
dus u hoeft deze niet voor iedere
cyclus te configureren.
De programmakeuzemodus
instellen
Het apparaat staat in de
programmakeuzemodus als de
programma-indicator aan is en op
het display de programmaduur staat.
Na de activering bevindt het apparaat
zich standaard in de
programmakeuzemodus. Als dit niet zo
www.aeg.com12
is, stelt u de programmakeuzemodus als
volgt in:
Houd tegelijkertijd Delay en Option
ingedrukt tot het apparaat in de
programmakeuzemodus staat.
Naar gebruikersmodus
Zorg dat het apparaat in de
programmakeuzemodus staat.
Houd, om naar de gebruikersmodus te
gaan, tegelijkertijd Delay en Option
ingedrukt totdat de indicatielampjes
,
160min
en knipperen
en het display blanco is.
7.2 De waterontharder
De waterontharder verwijdert mineralen
van de watertoevoer die een nadelige
invloed hebben op de wasresultaten en
het apparaat.
Hoe hoger het gehalte van deze
mineralen, des te harder is het water. De
waterhardheid wordt gemeten in de
volgende gelijkwaardige schalen.
De waterontharder moet worden
afgesteld op de hardheid van het water
in uw woonplaats. Uw waterleidingbedrijf
kan u informeren over de hardheid van
het water in uw woonplaats. Het is
belangrijk om het correcte niveau voor
de waterontharder in te stellen voor
goede wasresultaten.
Waterhardheid
Duitse hard‐
heid (°dH)
Franse hard‐
heid (°fH)
mmol/l Clarke-
hardheid
Wateronthardings‐
niveau
47 - 50 84 - 90 8,4 - 9,0 58 - 63 10
43 - 46 76 - 83 7,6 - 8,3 53 - 57 9
37 - 42 65 - 75 6,5 - 7,5 46 - 52 8
29 - 36 51 - 64 5,1 - 6,4 36 - 45 7
23 - 28 40 - 50 4,0 - 5,0 28 - 35 6
19 - 22 33 - 39 3,3 - 3,9 23 - 27
5
1)
15 - 18 26 - 32 2,6 - 3,2 18 - 22 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 2
<4 <7 <0,7 < 5
1
2)
1)
Fabrieksinstelling.
2)
Gebruik geen zout op dit niveau.
Stel ongeacht het gebruikte soort
wasmiddel het juiste
waterhardheidniveau in om de
bijvulindicator voor zout geactiveerd
te houden.
Multivaatwastabletten die
zout bevatten zijn niet
effectief genoeg als
waterontharder.
Regeneratieproces
Voor de juiste werking van de
waterontharder moet de hars van de
NEDERLANDS 13
ontharder regelmatig worden
geregenereerd. Dit proces is automatisch
en maakt deel uit van de normale
vaatwasmachinewerking.
Wanneer de voorgeschreven
hoeveelheid water (zie waarden in de
tabel) is gebruikt sinds het vorige
regeneratieproces, wordt een nieuw
regeneratieproces gestart tussen de
laatste spoeling en het einde van het
programma.
Wateronthardings‐
niveau
Hoeveelheid water
(l)
1 250
2 100
3 62
4 47
5 25
6 17
7 10
8 5
9 3
10 3
In het geval van de hoge
wateronthardersinstelling kan dit ook in
het midden van het programma
gebeuren, vóór het spoelen (tweemaal
tijdens een programma). De start van de
regeneratie heeft geen invloed op de
cyclusduur, tenzij deze plaatsvindt in het
midden van een programma of aan het
einde van een programma met een korte
droogfase. In dat geval verlengt de
regeneratie de totale duur van een
programma met nog eens 5 minuten.
Vervolgens kan het spoelen van de
waterontharder wat 5 minuten duurt,
beginnen in dezelfde cyclus of aan het
begin van het volgende programma.
Deze activiteit verhoogt het totale
waterverbruik van een programma met 4
liter en het totale energieverbruik van
een programma met 2 Wh. Het spoelen
van de waterontharder eindigt met een
volledige afvoer.
Elke uitgevoerde waterontharderspoeling
(mogelijk meer dan één in dezelfde
cyclus) kan de programmaduur met nog
eens 5 minuten verlengen wanneer deze
op enig moment aan het begin of in het
midden van een programma plaatsvindt.
Alle in deze paragraaf
genoemde verbruikswaarden
worden bepaald volgens de
huidige geldende norm in
laboratoriumomstandigheden
met waterhardheid 2,5
mmol/l volgens de
verordening 2019/2022
(waterontharder: niveau 3).
De druk en de temperatuur
van het water en de variaties
van de netvoeding kunnen
de waarden veranderen.
Het instellen van het
wateronthardingsniveau
Zorg dat het apparaat in de
gebruikersmodus staat.
1. Druk op Program.
Het indicatielampje
blijft
knipperen.
De resterende indicatielampjes
zijn uit.
Het display toont de huidige
instelling: bijv. = niveau 5.
2. Druk herhaaldelijk op Program om
de instelling te wijzigen.
3. Druk op de aan/uit-toets om de
instelling te bevestigen.
7.3 Het
glansspoelmiddelniveau
Met glansspoelmiddel wordt het
serviesgoed zonder vlekken of strepen
gedroogd. Het wordt automatisch
vrijgegeven tijdens de warme spoelfase.
De vrij te geven hoeveelheid glansmiddel
kan worden ingesteld tussen stand 1
(laagste hoeveelheid) en stand 8
(hoogste hoeveelheid).
Fabrieksinstelling: niveau 5.
Als het glansspoelmiddelreservoir leeg
is, gaat de glansspoelmiddelindicator
branden om aan te geven dat u
glansspoelmiddel moet bijvullen. Als u
www.aeg.com14
tevreden bent met de droogresultaten bij
het gebruik van alleen multitabletten,
kunt u de aanduiding van het
doseerbakje en het lampje deactiveren.
Gebruik echter voor de beste
droogprestaties altijd glansspoelmiddel
en houdt het lampje van het
glansspoelmiddel actief.
Om het glansspoelmiddeldoseerbakje en
-lampje te deactiveren, stelt u het niveau
van glansspoelmiddel in op 0.
Het glansspoelmiddelniveau
instellen
Zorg dat het apparaat in de
gebruikersmodus staat.
1. Druk op Start.
Het indicatielampje
160min
blijft
knipperen.
De resterende indicatielampjes
zijn uit.
Het display toont de huidige
instelling: bijv. = niveau 4.
De glansspoelmiddelniveaus
variëren van 0A tot 8A waar
niveau 0A betekent dat er
geen glansspoelmiddel wordt
gebruikt.
2. Druk herhaaldelijk op Start om de
instelling te wijzigen.
3. Druk op de aan/uit-toets om de
instelling te bevestigen.
7.4 AirDry
AirDry biedt goede droogresultaten met
minder energieverbruik. Tijdens de
droogfase opent de deur van het
apparaat automatisch en blijft deze op
een kier staan.
AirDry wordt bij alle programma's
automatisch geactiveerd, behalve bij
(indien van toepassing).
De duur van de droogfase en de
openingstijd van de deur variëren
afhankelijk van het geselecteerde
programma en de opties.
Wanneer AirDry de deur opent, toont het
display de resterende tijd van het actieve
programma.
LET OP!
Probeer de deur van het
apparaat niet binnen 2
minuten na automatisch
openen te sluiten. Dit kan
het apparaat beschadigen.
Als hierna de deur
gedurende ten minste 3
minuten wordt gesloten,
eindigt het draaiende
programma.
LET OP!
Als kinderen toegang tot het
apparaat hebben, adviseren
we AirDry om te deactiveren.
Het automatisch openen van
de deur kan een gevaar
vormen.
Deactiveren van AirDry
Zorg dat het apparaat in de
gebruikersmodus staat.
1. Druk op Delay.
Het indicatielampje blijft
knipperen.
De resterende indicatielampjes
zijn uit.
Het display toont de huidige
instelling:
= AirDry is
uitgeschakeld.
= AirDry is ingeschakeld.
2. Druk op Delay om de instelling te
wijzigen.
3. Druk op de aan/uit-toets om de
instelling te bevestigen.
NEDERLANDS 15
8. VOOR HET EERSTE GEBRUIK
1. Controleer of het ingestelde stand
van de waterontharder juist is voor
de waterhardheid in uw omgeving.
Indien niet, stel dan de stand van
de waterontharder juist in.
2. Vul het zoutreservoir.
3. Vul het
glansspoelmiddeldoseerbakje.
4. Draai de waterkraan open.
5. Start een programma om resten te
verwijderen die misschien nog in het
apparaat zijn achtergebleven.
Gebruik geen afwasmiddel en plaats
geen vaat in de korven.
Na het starten van het programma laadt
het apparaat de hars in de
waterverzachter maximaal 5 minuten op.
De wasfase start pas nadat deze
procedure voltooid is. De procedure
wordt regelmatig herhaald.
8.1 Het zoutreservoir
LET OP!
Gebruik uitsluitend grof zout
dat voor vaatwassers is
gemaakt. Fijn zout verhoogt
het risico op corrosie.
Het zout wordt gebruikt om de hars in de
waterontharder te herladen en voor
goede wasresultaten voor dagelijks
gebruik.
Het zoutreservoir vullen
1. Draai de dop linksom om het
zoutreservoir te openen.
2. Doe 1 liter water in het zoutreservoir
(alleen de eerste keer).
3. Vul het zoutreservoir met 1 kg zout
(totdat het vol is).
4. Schud de trechter voorzichtig bij het
handvat om de laatste korrels erin te
krijgen.
5. Verwijder het zout rond de opening
van het zoutreservoir.
6. Draai de dop van het zoutreservoir
rechtsom om het zoutreservoir te
sluiten.
LET OP!
Water en zout kunnen uit het
zoutreservoir stromen als u
het bijvult. Start na het
bijvullen van het
zoutreservoir onmiddellijk
een programma om corrosie
te voorkomen.
8.2 Het
glansspoelmiddelreservoir
vullen
B
C
A
LET OP!
Het compartiment (C) is
alleen voor glansmiddel. Vul
het niet met vaatwasmiddel.
www.aeg.com16
LET OP!
Gebruik alleen
glansspoelmiddel dat
speciaal is ontworpen voor
vaatwassers.
1. Druk op het ontgrendelelement (A)
om het deksel te openen (B).
2. Giet het glansspoelmiddel in het
doseervakje (C) totdat de vloeistof de
markering "FILL” heeft bereikt.
3. Verwijder gemorst glansspoelmiddel
met een absorberend doekje om te
voorkomen dat er te veel schuim
ontstaat.
4. Sluit het deksel. Zorg ervoor dat het
deksel op zijn plaats vergrendelt.
9. DAGELIJKS GEBRUIK
1. Draai de waterkraan open.
2. Druk op de aan/uit-toets om het
apparaat in te schakelen.
Zorg dat het apparaat in de keuzemodus
Programma staat.
Vul het zoutreservoir als het
zoutindicatielampje brandt.
Vul het glansmiddeldoseerbakje
als het indicatielampje van het
glansmiddel brandt.
3. Ruim de korven in.
4. Voeg vaatwasmiddel toe.
5. U dient het juiste programma in te
stellen en te starten voor het type
lading en de mate van vervuiling.
9.1 Vaatwasmiddel gebruiken
B
C
A
LET OP!
Gebruik alleen
vaatwasmiddel speciaal voor
vaatwassers.
1. Druk op de ontgrendelknop (B) om
het deksel te openen (C).
2. Doe het vaatwasmiddel in het vakje
(A). U kunt vaatwasmiddel in
tabletten, poeder of gel gebruiken.
3. Plaats een kleine hoeveelheid van
het vaatwasmiddel in de binnenkant
van de deur van het apparaat als het
programma een voorwasfase heeft.
4. Sluit het deksel. Zorg ervoor dat het
deksel op zijn plek dicht klikt.
9.2 Een programma instellen
en starten
De Auto off-functie
Deze functie verlaagt het energieverbruik
door het apparaat automatisch uit te
schakelen als het niet werkt.
De functie gaat werken:
Als het wasprogramma is voltooid.
Als er na 5 minuten nog geen
programma is gestart.
Een programma starten
1. Druk op de aan/uit-knop om het
apparaat te activeren. Zorg dat het
apparaat in de keuzemodus
Programma staat en de deur
gesloten is.
2. Blijf op Program drukken totdat het
indicatielampje van het gewenste
programma aangaat.
Het display geeft de programmaduur
weer.
3. Stel de bruikbare opties in.
4. Druk op Start om het programma te
starten.
Het indicatielampje van de
lopende fase is aan.
De programmaduur neemt af in
stappen van 1 minuut.
NEDERLANDS 17
Een programma starten met
een uitgestelde start
1. Stel een programma in.
2. Blijf op Delay drukken tot het display
de uitgestelde tijd toont die u wilt
instellen (van 1 tot 24 uur).
3. Druk op Start om het aftellen te
starten.
Het
-lampje brandt.
De resterende tijd telt af in uren.
Het laatste uur wordt in minuten
weergegeven.
Als het aftellen klaar is, start het
programma en gaat het indicatielampje
van de lopende fase branden. Het
indicatielampje is uit.
De deur openen als het
apparaat in werking is
Als u de deur opent terwijl een
programma loopt, stopt het apparaat. Dit
kan het energieverbruik en de
programmaduur beïnvloeden. Als u de
deur weer sluit, gaat het apparaat verder
vanaf het moment van onderbreking.
Als de deur tijdens de
droogfase langer dan 30
seconden wordt geopend,
stopt het lopende
programma. Dit gebeurt niet
als de deur wordt geopend
door de functie AirDry.
Probeer de deur van het
apparaat niet binnen 2
minuten nadat AirDry hem
automatisch opent te
openen, want dit kan schade
aan het apparaat
veroorzaken.
Als hierna de deur
gedurende ten minste 3
minuten wordt gesloten,
beëindigt het draaiende
programma.
De uitgestelde start
annuleren tijdens het aftellen
Als u de uitgestelde start annuleert, moet
u het programma en de opties opnieuw
instellen.
Houd tegelijkertijd Delay en Option
ingedrukt tot het apparaat in de
programmakeuzemodus staat.
Het programma annuleren
Houd tegelijkertijd Delay en Option
ingedrukt tot het apparaat in de
programmakeuzemodus staat.
Controleer of er vaatwasmiddel in het
vaatwasmiddelbakje aanwezig is voordat
u een nieuw programma start.
Einde van het programma
Als het programma is voltooid, schakelt
de Auto off functie het apparaat
automatisch uit.
Alle knoppen zijn inactief, behalve de
aan/uit-toets.
Draai de waterkraan dicht.
10. AANWIJZINGEN EN TIPS
10.1 Algemeen
Volg de onderstaande tips om te zorgen
voor optimale schoonmaak- en
droogresultaten en ook het milieu te
helpen beschermen.
www.aeg.com18
Het afwassen in de vaatwasser
volgens de instructies in de
gebruikershandleiding verbruikt
meestal minder water en energie dan
het afwassen met de hand.
Laad de vaatwasser volledig in om
water en energie te besparen. Voor
de beste reinigingsresultaten plaatst u
items in de korven volgens de
instructies in de
gebruikershandleiding en overbelast u
de korven niet.
Spoel de vaat niet eerst af. Het
verhoogt het water- en
energieverbruik. Kies indien nodig
een programma met voorwasfase.
Verwijder grotere voedselresten van
de borden en lege bekers en glazen
voordat u ze in het apparaat plaatst.
Week kookgerei met stevig
vastgekookt of vastgebakken voedsel
of poets het lichtjes voordat u het in
het apparaat wast.
Zorg ervoor dat de vaat in de manden
elkaar niet raakt of overlapt. Alleen
dan kan het water de vaat volledig
bereiken en wassen.
U kunt apart vaatwasmiddel,
glansmiddel en zout gebruiken of
kiezen voor het gebruik van
multitabletten (bijv. ''alles-in-1''). Volg
de instructies op de verpakking.
Kies een programma op basis van het
type lading en de mate van bevuiling.
biedt het meest efficiënte
gebruik van water en energieverbruik.
Om kalkaanslag in het apparaat te
voorkomen:
Vul de zoutcontainer indien nodig
bij.
Gebruik de aanbevolen dosering
van het wasmiddel en
spoelglansmiddel.
Controleer of het ingestelde stand
van de waterontharder juist is
voor de waterhardheid in uw
omgeving.
Volg de instructies in het
hoofdstuk "Onderhoud en
reiniging".
10.2 Gebruik van zout,
glansmiddel en
vaatwasmiddel
Gebruik enkel zout, glansmiddel en
vaatwasmiddel voor vaatwassers.
Overige producten kunnen het
apparaat beschadigen.
Maar in gebieden met hard en erg
hard water raden we het gebruik aan
van standaard vaatwasmiddel
(poeder, gel, tabletten zonder extra
middelen), met afzonderlijk
glansmiddel en zout voor optimale
reinigings- en droogresultaten.
Vaatwasmiddeltabletten lossen bij
korte programma's niet geheel op.
Om te voorkomen dat
vaatwasmiddelresten op het servies
achterblijven, raden we u aan om
tabletten enkel bij lange programma's
te gebruiken.
Gebruik altijd de juiste hoeveelheid
wasmiddel. Onvoldoende dosering
van het wasmiddel kan leiden tot
slechte reinigingsresultaten en
hardwaterfilmen of vlekken op de
voorwerpen. Het gebruik van te veel
wasmiddel met zacht of verzacht
water resulteert in wasmiddelresten
op de borden. Pas de hoeveelheid
wasmiddel aan op basis van de
waterhardheid. Zie de instructies van
de vaatwasmiddelfabrikant.
Gebruik altijd de juiste hoeveelheid
spoelglansmiddel. Onvoldoende
dosering van spoelglansmiddel
vermindert de droogresultaten. Het
gebruik van te veel spoelglansmiddel
resulteert in blauwachtige lagen op de
items.
Controleer of het
wateronthardersniveau correct is. Als
het niveau te hoog is, kan de
verhoogde hoeveelheid zout in het
water leiden tot roest op bestek.
10.3 Wat moet u doen als u
wilt stoppen met het gebruik
van multitabletten
Volg de volgende stappen voordat u
begint met het gebruiken van apart
wasmiddel, zout en glansmiddel:
NEDERLANDS 19
1. Stel het hoogste niveau van de
waterontharder in.
2. Zorg ervoor dat het zout- en het
glansspoelmiddeldoseerbakje gevuld
zijn.
3. Start het kortste programma met een
spoelfase. Voeg geen afwasmiddel
toe en plaats vaat in de korven.
4. Als het programma is voltooid, wijzigt
u de waterontharder in de
waterhardheid van uw omgeving.
5. Stel de hoeveelheid
glansspoelmiddel in.
10.4 De mandjes inruimen
Gebruik altijd de hele ruimte van de
mandjes.
Gebruik het apparaat uitsluitend om
afwasmachinebestendige voorwerpen
af te wassen.
Was in het apparaat geen items
gemaakt van hout, hoorn, aluminium,
tin en koper, omdat ze kunnen
barsten, kromtrekken, verkleuren of
putjes kunnen krijgen.
Reinig geen voorwerpen in het
apparaat die water kunnen
absorberen (sponzen,
keukenhanddoeken).
Plaats holle voorwerpen (bijv. kopjes,
glazen en pannen) met de opening
naar beneden.
Zorg er voor dat glazen items elkaar
niet aanraken.
Leg lichte voorwerpen in het
bovenrek. Zorg ervoor dat de
voorwerpen niet kunnen verschuiven.
Doe bestek en kleine items in het
bestekmand.
Beweeg de bovenste korf naar boven
om grote voorwerpen in de onderste
korf te kunnen plaatsen.
Zorg er voor dat de sproeiarmen vrij
kunnen ronddraaien voordat u een
programma start.
10.5 Voor het starten van een
programma
Zorg er, voordat u het gekozen
programma start, voor dat:
De filters schoon zijn en correct zijn
geplaatst.
De dop van het zoutreservoir goed
dicht zit.
De sproeiarmen niet zijn verstopt.
Er regenereerzout en glansmiddel is
toegevoegd (tenzij u gecombineerde
afwastabletten gebruikt).
De positie van de items in de mandjes
correct is.
Het programma geschikt is voor het
type lading en de mate van bevuiling.
De juiste hoeveelheid afwasmiddel is
gebruikt.
10.6 De rekken uitruimen
1. Laat de borden afkoelen voordat u
deze uit het apparaat neemt. Hete
borden zijn gevoelig voor
beschadigingen.
2. Ruim eerst het onderrek en dan het
bovenrek uit.
Na voltooiing van het
programma kan er zich aan
de binnenkant van het
apparaat nog water
bevinden.
11. ONDERHOUD EN REINIGING
WAARSCHUWING!
Schakel het apparaat uit en
trek de stekker uit het
stopcontact voordat u
onderhoudshandelingen
verricht.
Vuile filters en verstopte
sproeiarmen verminderen de
wasresultaten. Controleer
regelmatig de filters en reinig
deze zo nodig.
11.1 De filters reinigen
Het filtersystem bestaat uit 3 delen.
www.aeg.com20
C
B
A
1. Draai de filter (B) linksom en
verwijder het.
2. Verwijder de filter (C) uit de filter (B).
3. Verwijder de platte filter (A).
4. Was de filters.
5. Zorg ervoor dat er geen etensresten
of vuil in of rond de rand van de
opvangbak zitten.
6. Plaats de platte filter terug (A). Zorg
ervoor dat het goed onder de 2
geleidingen zit.
7. Plaats de filters (B) en (C) terug.
8. Plaats de filter (B) terug in de platte
filter (A). Rechtsom draaien tot het
vastzit.
NEDERLANDS 21
LET OP!
Een onjuiste plaatsing van
de filters kan leiden tot
slechte wasresultaten en het
apparaat beschadigen.
11.2 De onderste sproeiarm
schoonmaken
We raden u aan om de onderste
sproeiarm regelmatig schoon te maken
om te voorkomen dat vuil de gaten
verstopt.
Verstopte gaten kunnen onbevredigende
wasresultaten opleveren.
1. Trek de onderste sproeiarm naar
boven om deze te verwijderen.
2. Reinig de sproeiarm onder stromend
water. Gebruik een smal en puntig
gereedschap, bijv. een tandenstoker,
om de vuildeeltjes uit de gaten te
verwijderen.
3. Duw de sproeiarm naar beneden om
deze weer terug te plaatsen.
11.3 De bovenste
sproeiarmen schoonmaken
We raden u aan om de bovenste
sproeiarmen regelmatig schoon te
maken om te voorkomen dat vuil de
gaten verstopt. Verstopte gaten kunnen
onbevredigende wasresultaten
opleveren.
De bovenste sproeiarmen worden onder
de bovenste korf geplaatst. De
sproeiarmen (B) zijn geïnstalleerd in de
toevoerleiding (A) met de
bevestigingselementen (C).
A
B
C
1. Trek het bovenrek naar buiten.
2. Om de sproeiarm los te maken,
draait u het bevestigingselement met
de klok mee.
www.aeg.com22
3. Reinig de sproeiarm onder stromend
water. Gebruik een smal en puntig
gereedschap, bijv. een tandenstoker,
om de vuildeeltjes uit de gaten te
verwijderen.
4. Steek om de sproeiarm terug te
plaatsen het bevestigingselement in
de sproeiarm en bevestig deze in de
toevoerleiding door deze naar links te
draaien. Zorg ervoor dat het
bevestigingselement op zijn plek
dicht klikt.
11.4 De binnenkant van de
machine reinigen
Reinig het apparaat zorgvuldig,
inclusief de rubberen afdichting van
de deur, met een zachte, vochtige
doek.
Gebruik om de prestaties van uw
apparaat te onderhouden minstens
elke twee maanden een
reinigingsproduct dat specifiek is
ontwikkeld voor vaatwassers. Volg de
instructies op de verpakking van de
producten zorgvuldig op.
Gebruik het programma voor
optimale reinigingsresultaten.
Gebruik geen schuurmiddelen,
schuursponsjes, scherpe voorwerpen,
sterke chemicaliën, pannensponsjes
of oplosmiddelen.
Het regelmatig gebruiken van korte
programma´s kan ophoping van vet
en kalk in het apparaat tot gevolg
hebben. Draai minstens tweemaal per
maand lange programma´s om deze
ophoping te voorkomen.
11.5 Verwijderen van
vreemde voorwerpen
Controleer de filters en de opvangbak na
elk gebruik van de vaatwasser. Vreemde
voorwerpen (bijv. stukken glas, plastic,
botten of tandenstokers, enz.)
verminderen de reinigingsprestaties en
kunnen schade aan de afvoerpomp
veroorzaken.
1. Demonteer het filtersysteem volgens
de instructies in dit hoofdstuk.
2. Verwijder alle vreemde voorwerpen
met de hand.
LET OP!
Als u de voorwerpen niet
kunt verwijderen, neem
dan contact op met een
erkend servicecentrum.
3. Monteer de filters opnieuw volgens
de instructies in dit hoofdstuk.
11.6 Buitenkant reinigen
Maak het apparaat schoon met een
vochtige, zachte doek.
Gebruik alleen neutrale
schoonmaakmiddelen.
Gebruik geen schuurmiddelen,
schuursponsjes of oplosmiddelen.
NEDERLANDS 23
12. PROBLEEMOPLOSSING
WAARSCHUWING!
Onjuiste reparatie van het
apparaat kan een gevaar
voor de veiligheid van de
gebruiker vormen.
Reparaties moeten worden
uitgevoerd door
gekwalificeerd personeel.
Het merendeel van de problemen die
ontstaan kunnen worden opgelost
zonder contact op te nemen met een
erkend servicecentrum.
Zie de onderstaande tabel voor
informatie over mogelijke problemen.
Bij sommige problemen toont het display
een alarmcode.
Probleem en alarmcode Mogelijke oorzaak en oplossing
U kunt het apparaat niet in‐
schakelen.
Controleer of de stekker is aangesloten op het stopcon‐
tact.
Controleer of er geen beschadigde zekering in het zeke‐
ringenkastje is.
Het programma start niet. Controleer of de deur van het apparaat gesloten is.
Druk op Start.
Als de optie uitgestelde start is ingesteld, annuleert u de
instelling of wacht u totdat het aftellen voorbij is.
Het apparaat herlaadt de hars uit de waterontharder. De
duur van de procedure is ongeveer 5 minuten.
Het apparaat wordt niet met
water gevuld.
Op het display verschijnt i10
of i11.
Controleer of de waterkraan geopend is.
Controleer of de druk van de watervoorziening niet te
laag is. Neem voor deze informatie contact op met uw
plaatselijke waterleidingbedrijf.
Controleer of de waterkraan niet verstopt is.
Controleer of het filter in de toevoerslang niet verstopt
is.
Controleer of de toevoerslang geen knikken of bochten
heeft.
De machine pompt geen wa‐
ter weg.
Op het display verschijnt
i20.
Controleer of de gootsteenafvoer niet verstopt is.
Controleer of het binnenfiltersysteem niet verstopt is.
Controleer of de afvoerslang geen knikken of bochten
heeft.
De anti-overstromingsbevei‐
liging is ingeschakeld.
Op het display verschijnt
i30.
Draai de waterkraan dicht.
Controleer of het apparaat correct geïnstalleerd is.
Controleer of de korven zijn geladen volgens de instruc‐
ties in de gebruikershandleiding.
Storing van de waterniveau
detectiesensor.
Op het display verschijnt i41
- i44.
Controleer of de filters schoon zijn.
Schakel het apparaat uit en aan.
www.aeg.com24
Probleem en alarmcode Mogelijke oorzaak en oplossing
Storing van de waspomp of
de afvoerpomp.
Op het display verschijnt i51
- i59 of i5A - i5F.
Schakel het apparaat uit en aan.
De temperatuur van het wa‐
ter in het apparaat is te hoog
of er is een storing in de
temperatuursensor opgetre‐
den.
Op het display verschijnt i61
of i69.
Controleer of de temperatuur van het toegevoerde water
niet hoger is dan 60 °C.
Schakel het apparaat uit en aan.
Technische storing van het
apparaat.
Op het display verschijnt iC0
of iC3.
Schakel het apparaat uit en aan.
Het niveau van het water in
het apparaat is te hoog.
Op het display verschijnt
iF1.
Schakel het apparaat uit en aan.
Controleer of de filters schoon zijn.
Controleer of de afvoerslang op de juiste hoogte boven
de vloer is geïnstalleerd. Raadpleeg de installatie-in‐
structies.
Het apparaat stopt en begint
meerdere keren tijdens de
werking.
Dat is normaal. Het zorgt voor optimale reinigingsresul‐
taten en energiebesparing.
Het programma duurt te
lang.
Als de optie uitgestelde start is ingesteld, annuleert u
deze functie of wacht u tot het aftellen is voltooid.
De weergegeven program‐
maduur is anders dan de
duur in de tabel verbruiks‐
waarden.
Raadpleeg de tabel verbruikswaarden in het hoofdstuk
"Programma’s".
De resterende duur in het
display wordt verlengd en
schakelt bijna naar het eind
van de programmatijd.
Dit is geen defect. Het apparaat werkt correct.
Kleine lekkage van de deur
van het apparaat.
Het apparaat staat niet waterpas. Draai aan de verstel‐
bare pootjes (indien van toepassing).
De deur van het apparaat is niet centraal uitgelijnd op
de kuip. Verstel de achterpoot (indien van toepassing).
De deur van het apparaat is
moeilijk te sluiten.
Het apparaat staat niet waterpas. Draai aan de verstel‐
bare pootjes (indien van toepassing).
Delen van het serviesgoed steken uit de korven.
De deur van het apparaat
gaat open tijdens de wascy‐
clus.
De AirDry functie is geactiveerd. U kunt de functie uit‐
schakelen. Raadpleeg "Instellingen".
NEDERLANDS 25
Probleem en alarmcode Mogelijke oorzaak en oplossing
Ratelende/kloppende gelui‐
den vanuit het apparaat.
Het serviesgoed is niet juist in de korven gerangschikt.
Raadpleeg de folder voor het laden van de korven.
Controleer of de sproeiarmen vrij kunnen ronddraaien.
Het apparaat maakt kortslui‐
ting.
De stroomsterkte is niet voldoende om alle apparaten
tegelijkertijd te voeden. Controleer de stroomsterkte van
het stopcontact en de capaciteit van de meter of schakel
een van de apparaten die in gebruik zijn uit.
Interne elektrische storing van het apparaat. Neem con‐
tact op met de servicedienst.
Raadpleeg "Voor het
eerste gebruik", "Dagelijks
gebruik", of "Aanwijzingen
en tips" voor andere
mogelijke oorzaken.
Schakel het apparaat uit en weer in als u
het apparaat hebt gecontroleerd. Als het
probleem opnieuw optreedt, neemt u
contact op met een erkend
servicecentrum.
Voor alarmcodes die niet in de tabel
worden beschreven, neemt u contact op
met een erkend servicecentrum.
WAARSCHUWING!
We raden u aan om het
apparaat niet te gebruiken
totdat het probleem volledig
is opgelost. Haal de stekker
uit het stopcontact en sluit
het apparaat pas weer aan
als u zeker weet dat het
correct werkt.
12.1 De was- en droogresultaten zijn niet naar tevredenheid
Probleem Mogelijke oorzaak en oplossing
Slechte wasresultaten. Raadpleeg "Dagelijks gebruik", "Aanwijzingen en
tips" en de folder voor het laden van de korven.
Gebruik een intensiever wasprogramma.
Activeer de ExtraPower optie om de wasresultaten
van een geselecteerd programma te verbeteren.
Maak de inspuiters van de sproeiarm en het filter
schoon. Raadpleeg "Onderhoud en reinigen".
www.aeg.com26
Probleem Mogelijke oorzaak en oplossing
Slechte droogresultaten. Serviesgoed heeft te lang in het gesloten apparaat ge‐
staan. Activeer AirDry om het automatisch openen van
de deur in te stellen en de droogprestatie te verbete‐
ren.
Het glansspoelmiddel is op of de dosering van het
glansspoelmiddel is niet voldoende. Vul het doseer‐
bakje van het glansspoelmiddel of zet de glansspoel‐
middelstand hoger.
De kwaliteit van het glansspoelmiddel kan de oorzaak
zijn.
We raden aan om altijd glansspoelmiddel te gebrui‐
ken, zelfs in combinatie met vaatwastabletten.
Plastic voorwerpen moeten mogelijk met een hand‐
doek worden afgedroogd.
Het programma heeft geen droogfase. Raadpleeg
"Programmaoverzicht".
De glazen en borden vertonen
witte strepen of een blauwe
waas.
De vrijgegeven hoeveelheid glansspoelmiddel is te
hoog. Zet de dosering van het glansspoelmiddel op
een lagere stand.
De hoeveelheid vaatwasmiddel is te hoog.
De glazen en borden vertonen
vlekken en droge waterdrup‐
pels.
De vrijgegeven hoeveelheid glansmiddel is niet vol‐
doende. Zet de dosering van het glansspoelmiddel op
een hogere stand.
De kwaliteit van het glansspoelmiddel kan de oorzaak
zijn.
De binnenkant van het appa‐
raat is nat.
Dit is geen defect van het apparaat. Vochtige lucht
condenseert op de wanden van het apparaat.
Opvallend veel schuim tijdens
het wassen.
Gebruik de vaatwasmiddelen die specifiek zijn be‐
doeld voor gebruik in vaatwassers.
Gebruik een vaatwasmiddel van een andere fabrikant.
Spoel borden niet af onder stromend water voordat u
ze in het apparaat plaatst.
Roestresten op het bestek. Er zit te veel zout in het water dat voor het wassen
wordt gebruikt. Raadpleeg "De waterontharder".
Zilver en roestvrijstalen bestek zijn samen geplaatst.
Zet zilveren en roestvrijstalen voorwerpen niet dicht bij
elkaar.
NEDERLANDS 27
Probleem Mogelijke oorzaak en oplossing
Er bevinden zich aan het ein‐
de van het programma resten
van het vaatwasmiddel in het
doseerbakje voor het vaatwas‐
middel.
De vaatwastablet raakte klem in het doseerbakje voor
het vaatwasmiddel en is daardoor niet volledig wegge‐
spoeld door het water.
Water kan het vaatwasmiddel niet uit het doseerbakje
wegspoelen. Controleer of de sproeiarmen niet ge‐
blokkeerd of verstopt zijn.
Controleer of de voorwerpen in de rekken het deksel
van het doseerbakje voor het vaatwasmiddel niet be‐
lemmeren.
Geuren in het apparaat. Raadpleeg "Intern reinigen".
Start het programma met een ontkalker of een rei‐
nigingsproduct bestemd voor vaatwassers.
Kalkresten op het servies‐
goed, op de kuip en aan de
binnenkant van de deur.
Het zoutniveau is laag, controleer de bijvulaanduiding.
De dop van het zoutreservoir zit los.
U heeft hard kraanwater. Raadpleeg "De wateront‐
harder".
Gebruik zout en stel zelfs bij het gebruik van multita‐
bletten de waterontharder in. Raadpleeg "De water‐
ontharder".
Start het programma met een ontkalker bestemd
voor vaatwassers.
Indien de kalkaanslag aanwezig blijft, reinigt u het ap‐
paraat met reinigingsmiddelen die hier speciaal voor
zijn bestemd.
Probeer een ander vaatwasmiddel.
Neem contact op met de vaatwasmiddelfabrikant.
Dof, ontkleurd of afgeschilferd
serviesgoed.
Zorg ervoor dat alleen vaatwasserbestendige voorwer‐
pen in het apparaat worden gewassen.
Laad de korf voorzichtig in en uit. Raadpleeg de folder
voor het laden van de korven.
Plaats kwetsbare voorwerpen in de bovenste korf.
Activeer de GlassCare optie om te zorgen voor speci‐
ale verzorging voor glaswerk en kwetsbare voorwer‐
pen.
Raadpleeg "Voor het
eerste gebruik", "Dagelijks
gebruik", of "Aanwijzingen
en tips" voor andere
mogelijke oorzaken.
13. TECHNISCHE INFORMATIE
Afmetingen Breedte / hoogte / diepte
(mm)
446/850/615
www.aeg.com28
Elektrische aansluiting
1)
Voltage (V) 220 - 240
Frequentie (Hz) 50
Watertoevoerdruk Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)
Watertoevoer Koud water of warm wa‐
ter
2)
max. 60 °C
Inhoud Couverts 9
Stroomverbruik Modus aan laten (W) 5.0
Uit-modus (W) 0.50
1)
Zie het typeplaatje voor andere waarden.
2)
Als het hete water door een alternatieve, milieuvriendelijkere energiebron geproduceerd wordt (bijv.
zonnepanelen), gebruik dan een heetwatervoorziening om het energieverbruik te verminderen.
13.1 Link naar de EU-EPREL-
databank
De QR-code op het energielabel dat bij
het apparaat wordt geleverd, biedt een
weblink naar de registratie van dit
apparaat in de EU-EPREL-database.
Bewaar het energielabel ter referentie
samen met de gebruikershandleiding en
alle andere documenten die bij dit
apparaat worden geleverd.
Het is ook mogelijk om informatie
gerelateerd aan de prestaties van het
product in de EU-EPREL-databank te
vinden via de link https://
eprel.ec.europa.eu en de modelnaam en
het productnummer kunt u vinden op het
typeplaatje van het apparaat. Zie het
hoofdstuk ‘Productbeschrijving’.
Kijk voor meer informatie over het
energielabel op www.theenergylabel.eu
14. MILIEUBESCHERMING
Recycleer de materialen met het
symbool . Gooi de verpakking in een
geschikte afvalcontainer om het te
recycleren. Bescherm het milieu en de
volksgezondheid en recycleer op een
correcte manier het afval van elektrische
en elektronische apparaten. Gooi
apparaten gemarkeerd met het symbool
niet weg met het huishoudelijk afval.
Breng het product naar het milieustation
bij u in de buurt of neem contact op met
de gemeente.
NEDERLANDS 29
CONTENTS
1. SAFETY INFORMATION....................................................................................30
2. SAFETY INSTRUCTIONS.................................................................................. 32
3. PRODUCT DESCRIPTION.................................................................................34
4. CONTROL PANEL..............................................................................................35
5. PROGRAMMES..................................................................................................36
6. OPTIONS............................................................................................................38
7. SETTINGS.......................................................................................................... 39
8. BEFORE FIRST USE..........................................................................................42
9. DAILY USE......................................................................................................... 43
10. HINTS AND TIPS..............................................................................................45
11. CARE AND CLEANING.................................................................................... 46
12. TROUBLESHOOTING......................................................................................49
13. TECHNICAL INFORMATION............................................................................53
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.aeg.com/support
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
www.aeg.com30
responsible for any injuries or damage that are the result
of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.
Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
Do not let children play with the appliance.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
This appliance is intended to be used in household
and similar applications such as:
farm houses; staff kitchen areas in shops, offices
and other working environments;
by clients in hotels, motels, bed & breakfast and
other residential type environments.
Do not change the specification of this appliance.
The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 8 (0.8) bar
(MPa)
Follow the maximum number of 9 place settings.
ENGLISH 31
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
Put the cutlery in the cutlery basket with the sharp
ends pointing down or put them in the cutlery drawer
in a horizontal position with the sharp edges down.
Do not leave the appliance with the open door
unattended to avoid stepping accidentally onto it.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
If the appliance has ventilation openings in the base,
they must not be covered e.g. by a carpet.
The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Follow the installation instructions
supplied with the appliance.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Do not install or use the appliance
where the temperature is less than
0 °C.
Install the appliance in a safe and
suitable place that meets installation
requirements.
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
The appliance must be earthed.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need to
be replaced, this must be carried out
by our Authorised Service Centre.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
www.aeg.com32
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
This appliance is fitted with a 13 A
mains plug. If it is necessary to
change the mains plug fuse, use only
a 13 A ASTA (BS 1362) fuse (UK and
Ireland only).
2.3 Water connection
Do not cause damage to the water
hoses.
Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
The water inlet hose has a safety
valve and a sheath with an inner
mains cable.
WARNING!
Dangerous voltage.
If the water inlet hose is damaged,
immediately close the water tap and
disconnect the mains plug from the
mains socket. Contact the Authorised
Service Centre to replace the water
inlet hose.
2.4 Use
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Dishwasher detergents are
dangerous. Follow the safety
instructions on the detergent
packaging.
Do not drink and play with the water in
the appliance.
Do not remove the dishes from the
appliance until the programme is
complete. Some detergent may
remain on the dishes.
Do not store items or apply pressure
on the open door of the appliance.
The appliance can release hot steam
if you open the door while a
programme operates.
2.5 Internal lighting
WARNING!
Risk of injury.
Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended
to withstand extreme physical
conditions in household appliances,
such as temperature, vibration,
humidity, or are intended to signal
information about the operational
status of the appliance. They are not
intended to be used in other
applications and are not suitable for
household room illumination.
To replace the internal lighting,
contact the Authorised Service
Centre.
2.6 Service
To repair the appliance contact the
Authorised Service Centre. Use
original spare parts only.
Please note that self-repair or non-
professional repair can have safety
consequences and might void the
guarantee.
The following spare parts will be
available for 7 years after the model
has been discontinued: motor,
circulation and drain pump, heaters
and heating elements, including heat
pumps, piping and related equipment
including hoses, valves, filters and
aquastops, structural and interior
parts related to door assemblies,
printed circuit boards, electronic
displays, pressure switches,
thermostats and sensors, software
and firmware including reset software.
Please note that some of these spare
parts are only available to
professional repairers, and that not all
ENGLISH 33
spare parts are relevant for all
models.
The following spare parts will be
available for 10 years after the model
has been discontinued: door hinge
and seals, other seals, spray arms,
drain filters, interior racks and plastic
peripherals such as baskets and lids.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the
mains supply.
Cut off the mains cable and discard it.
Remove the door catch to prevent
children and pets to get closed in the
appliance.
3. PRODUCT DESCRIPTION
The graphics below is just a
general product overview.
For more detailed
information, refer to other
chapters and/or documents
provided with the appliance.
5
4
8
9
11 10
67
12
2
3
1
1
Worktop
2
Upper spray arms
3
Lower spray arm
4
Filters
5
Rating plate
6
Salt container
7
Air vent
8
Rinse aid dispenser
9
Detergent dispenser
10
Cutlery basket
11
Lower basket
12
Upper basket
www.aeg.com34
4. CONTROL PANEL
1
2 4 5
68
3
7
1
On/off button
2
Program button
3
Programme indicators
4
Display
5
Delay button
6
Option button
7
Indicators
8
Start button
4.1 Indicators
Indicator Description
Salt indicator. It is on when the salt container needs refilling. It is always
off while the programme operates.
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. It
is always off while the programme operates.
Washing phase indicator. It is on when the washing phase operates.
Rinsing phase indicator. It is on when the rinsing phase operates.
Drying phase indicator. It is on when you select a programme with the dry‐
ing phase. It flashes when the drying phase operates.
Delay indicator. It is on when you set the delay start.
GlassCare indicator.
ExtraPower indicator.
ExtraHygiene indicator.
ENGLISH 35
5. PROGRAMMES
The order of the programmes in the table
may not reflect their sequence on the
control panel.
Pro‐
gramme
Type of load Degree of
soil
Programme phases Options
1)
Crockery
Cutlery
Pots
Pans
Normal
Lightly
dried-on
Prewash
Wash 50 °C
Intermediate rinse
Final rinse 55 °C
Drying
AirDry
ExtraPower
GlassCare
ExtraHygiene
160min
Crockery
Cutlery
Pots
Pans
Normal to
heavy
Dried-on
Prewash
Wash 60 °C
Intermediate rinse
Final rinse 60 °C
Drying
AirDry
ExtraPower
GlassCare
ExtraHygiene
Crockery
Cutlery
Pots
Pans
Normal
Lightly
dried-on
Wash 60 °C
Intermediate rinse
Final rinse 55 °C
Drying
AirDry
ExtraPower
GlassCare
ExtraHygiene
Crockery
Cutlery
Fresh
Lightly
dried-on
Wash 60 °C
Intermediate rinse
Final rinse 50 °C
AirDry
ExtraPower
GlassCare
ExtraHygiene
Crockery
Cutlery
Fresh Wash 50 °C
Intermediate rinse
Final rinse 50 °C
AirDry
ExtraPower
GlassCare
ExtraHygiene
2)
Crockery
Cutlery
Pots
Pans
The pro‐
gramme ad‐
justs to all de‐
grees of soil.
Prewash
Wash 50 - 60 °C
Intermediate rinse
Final rinse 60 °C
Drying
AirDry
ExtraHygiene
3)
No load The pro‐
gramme
cleans the ap‐
pliance interi‐
or.
Wash 70 °C
Intermediate rinse
Final rinse
AirDry
4)
All types of
loads
All degrees
of soil
Prewash
www.aeg.com36
Pro‐
gramme
Type of load Degree of
soil
Programme phases Options
5)
Crockery
and cutlery
Normal soil Prewash
Wash 58 °C
Intermediate rinse
Final rinse 60 °C
Dry
AirDry
1)
This programme offers the most efficient use of water and energy consumption for crockery and cut‐
lery with normal soil. This is the standard programme for test institutes. This programme is used to as‐
sess compliance with the Ecodesign Comission Regulation (EU) 2019/2022.
2)
The appliance senses the degree of soil and the quantity of items in the baskets. It automatically ad‐
justs the temperature and the quantity of water, the energy consumption and the programme duration.
3)
This programme is designed to clean the inside of the appliance effectively and efficiently. It removes
limescale and grease buildup. The programme should be run at least once every 2 months with a desca‐
ler or a cleaning product designed for dishwashers and without any load.
4)
With this programme, you can quickly rinse off food remains from dishes and prevent odours forming
in the appliance. Do not use detergent with this programme.
5)
This is the most silent programme. The wash pump works at a very low speed to reduce the noise
generated by the appliance. Due to the low speed, the programme duration is long.
5.1 Consumption values
Programme
1)
2)
Water (l) Energy (kWh) Duration (min)
9.9
3)
/ 9.9
4)
0.689
3)
/ 0.704
4)
240
3)
/ 240
4)
160min
8.8 - 10.8 0.854 - 1.043 160
8.5 - 10.4 0.743 - 0.909 90
8.2 - 10 0.628 - 0.767 60
7.9 - 9.7 0.543 - 0.664 30
8.0 - 10.7 0.683 - 1.047 120 - 170
7.4 - 8.9 0.396 - 0.484 60
2.8 - 3.4 0.011 - 0.014 15
8.5 - 10.3 0.679 - 0.839 248
1)
The pressure and the temperature of the water, the variations of the mains supply, the options, the
quantity of dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
3)
In accordance with the 1016/2010 regulation.
4)
In accordance with the 2019/2022 regulation.
ENGLISH 37
5.2 Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436 ), send an email
to:
In your request, please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher, please refer to the service
book provided with your appliance.
6. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
The Option button toggles
between the available
options and their possible
combinations.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
If an option is not applicable
to a programme, the related
indicator is off or it flashes
quickly for a few seconds
and then goes out.
Activating options can affect
the water and energy
consumption as well as the
programme duration.
6.1 GlassCare
This option provides special care for a
delicate load. It prevents rapid changes
in the wash temperature of the selected
programme and reduces it to 45 °C. This
protects glassware in particular from
damaging.
How to activate GlassCare
Press Option until the indicator is on.
The display shows the updated
programme duration.
6.2 ExtraPower
This option improves the washing results
of the selected programme. It increases
the wash temperature and duration.
How to activate ExtraPower
Press Option until the indicator is
on.
The display shows the updated
programme duration.
6.3 ExtraHygiene
This option provides better hygiene
results by keeping the temperature
between 65 and 70 °C for at least 10
minutes during the last rinsing phase.
How to activate ExtraHygiene
Press Option until the indicator is on.
The display shows the updated
programme duration.
www.aeg.com38
7. SETTINGS
7.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter user mode.
Settings available in the user mode:
The level of water softener according
to the water hardness.
The level of rinse aid according to the
required dosage.
Activation or deactivation of the
AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
is on and the display shows the
programme duration.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously Delay
and Option until the appliance is in
programme selection mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
To enter user mode, press and hold
simultaneously Delay and Option until
the indicators
,
160min
and
flash and the display is blank.
7.2 The water softener
The water softener removes minerals
from the water supply, which would have
a negative effect on the washing results
and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
Water hardness
German de‐
grees (°dH)
French de‐
grees (°fH)
mmol/l Clarke de‐
grees
Water softener lev‐
el
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
ENGLISH 39
German de‐
grees (°dH)
French de‐
grees (°fH)
mmol/l Clarke de‐
grees
Water softener lev‐
el
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1)
Factory setting.
2)
Do not use salt at this level.
Regardless of the type of detergent
used, set the proper water hardness
level to keep the salt refill indicator
active.
Multi-tabs containing salt are
not effective enough to
soften hard water.
Regeneration process
For the correct water softener operation,
the resin of the softener device needs to
be regenerated regularly. This process is
automatic and is the part of the normal
dishwasher operation.
When the prescribed quantity of water
(see values in the table) has been used
since the previous regeneration process,
a new regeneration process will be
initiated between the final rinse and the
programme end.
Water softener lev‐
el
Amount of water
(l)
1 250
2 100
3 62
4 47
5 25
6 17
7 10
8 5
9 3
10 3
In case of the high water softener setting,
it may occur also in the middle of the
programme, before the rinse (twice
during a programme). Regeneration
initiation has no impact on the cycle
duration, unless it occurs in the middle of
a programme or at the end of a
programme with a short drying phase. In
that cases, the regeneration prolongs the
total duration of a programme by
additional 5 minutes.
Subsequently, the rinsing of the water
softener that lasts 5 minutes may begin
in the same cycle or at the beginning of
the next programme. This activity
increases the total water consumption of
a programme by additional 4 litres and
the total energy consumption of a
programme by additional 2 Wh. The
rinsing of the softener ends with a
complete drain.
Each performed softener rinse (possible
more than one in the same cycle) may
prolong the programme duration by
another 5 minutes when it occurs at any
point at the beginning or in the middle of
a programme.
All the consumption values
mentioned in this section are
determined in accordance
with the currently applicable
standard in laboratory
conditions with water
hardness 2.5mmol/L
according to the 2019/2022
regulation (water softener:
level 3).
The pressure and the
temperature of water as well
as the variations of the
mains supply can change
the values.
www.aeg.com40
How to set the water softener
level
Make sure the appliance is in user mode.
1. Press Program.
The indicator
still flashes.
The remaining indicators are off.
The display shows the current
setting: e.g. = level 5.
2. Press Program repeatedly to change
the setting.
3. Press the on/off button to confirm the
setting.
7.3 The rinse aid level
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the hot
rinse phase.
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 8 (maximum quantity).
Factory setting: level 5.
When the rinse aid chamber is empty,
the rinse aid indicator is on, notifying to
refill rinse aid. If the drying results are
satisfactory while using multi-tablets only,
it is possible to deactivate the dispenser
and the indicator. However, for the best
drying performance, always use rinse aid
and keep the rinse aid indicator active.
To deactivate the rinse aid dispenser and
indicator, set the level of rinse aid to 0.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press Start.
The indicator
160min
still
flashes.
The remaining indicators are off.
The display shows the current
setting: e.g. = level 4.
The levels of rinse aid range
from 0A to 8A where level 0A
means no rinse aid is used.
2. Press Start repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
7.4 AirDry
AirDry improves the drying results with
less energy consumption. The appliance
door opens automatically during the
drying phase and remains ajar.
AirDry is automatically activated with all
programmes other than (if
applicable).
The duration of the drying phase and the
door opening time vary depending on the
selected programme and options.
When AirDry opens the door, the display
shows the remaining time of the running
programme.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for at least 3 minutes,
the running programme
ends.
CAUTION!
If children have access to
the appliance, we advise to
deactivate AirDry. The
automatic opening of the
door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press Delay.
The indicator still flashes.
The remaining indicators are off.
ENGLISH 41
The display shows the current
setting:
= AirDry is deactivated.
= AirDry is activated.
2. Press Delay to change the setting.
3. Press the on/off button to confirm the
setting.
8. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in
the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
8.1 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (only for the first time).
3. Fill the salt container with 1 kg of salt
(until it is full).
4. Carefully shake the funnel by its
handle to get the last granules inside.
5. Remove the salt around the opening
of the salt container.
6. Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out
of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.
www.aeg.com42
8.2 How to fill the rinse aid
dispenser
B
C
A
CAUTION!
The compartment (C) is for
rinse aid only. Do not fill it
with detergent.
CAUTION!
Only use rinse aid designed
specifically for dishwashers.
1. Press the release element (A) to
open the lid (B).
2. Pour the rinse aid in the dispenser
(C) until the liquid reaches the
marking "FILL".
3. Remove the spilled rinse aid with an
absorbent cloth to prevent excessive
foam formation.
4. Close the lid. Make sure that the lid
locks into position.
9. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
If the salt indicator is on, fill the
salt container.
If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start a programme suitable
for the type of load and the degree of
soil.
9.1 Using the detergent
B
C
A
CAUTION!
Only use detergent designed
specifically for dishwashers.
1. Press the release button (B) to open
the lid (C).
2. Put the detergent in the compartment
(A). You can use detergent in tablets,
powder or gel.
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
9.2 Setting and starting a
programme
The Auto off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
When the programme is complete.
After 5 minutes if a programme was
not started.
ENGLISH 43
Starting a programme
1. Press the on/off button to activate the
appliance. Make sure that the
appliance is in programme selection
mode and the door is closed.
2. Press Program again and again until
the indicator of the desired
programme is on.
The display shows the programme
duration.
3. Set the applicable options.
4. Press Start to start the programme.
The indicator of the running phase
is on.
The programme duration starts to
decrease with steps of 1 minute.
Starting a programme with
delay start
1. Set a programme.
2. Press Delay repeatedly until the
display shows the desired delay time
(from 1 to 24 hours).
3. Press Start to begin the countdown.
The indicator is on.
The remaining time counts down
in hours. The final hour is
displayed in minutes.
When the countdown is completed, the
programme starts and the indicator of the
running phase is on. The indicator
is
off.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme ends. It
does not happen if the door
is opened by AirDry function.
Do not try to close the
appliance door within 2
minutes after AirDry
automatically opens it as this
may cause damage to the
appliance.
If, afterwards, the door is
closed for at least 3 minutes,
the running programme
ends.
Cancelling the delay start
while the countdown
operates
When you cancel the delay start you
have to set the programme and options
again.
Press simultaneously Delay and Option
until the appliance is in programme
selection mode.
Cancelling the programme
Press and hold simultaneously Delay
and Option until the appliance is in
programme selection mode.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
End of the programme
When the programme is complete, the
Auto off function switches the appliance
off automatically.
All buttons are inactive except for the
on/off button.
Close the water tap.
www.aeg.com44
10. HINTS AND TIPS
10.1 General
Follow the hints below to ensure optimal
cleaning and drying results in daily use
and to protect the environment.
Washing dishes in the dishwasher as
instructed in the user manual usually
consumes less water and energy than
washing dishes by hand.
Load the dishwasher to its full
capacity to save water and energy.
For best cleaning results, arrange
items in the baskets as instructed in
the user manual and do not overload
the baskets.
Do not pre-rinse dishes by hand. It
increases the water and energy
consumption. When needed, select a
programme with a prewash phase.
Remove larger residues of food from
the dishes and empty cups and
glasses before putting them inside the
appliance.
Soak or slightly scour cookware with
firmly cooked-on or baked-on food
before washing it in the appliance.
Make sure that items in the baskets
do not touch or cover each other.
Only then can the water completely
reach and wash the dishes.
You can use dishwasher detergent,
rinse aid and salt separately or you
can use the multi-tablets (e.g. ''All in
1''). Follow the instructions on the
packaging.
Select a programme according to the
type of load and the degree of soil.
offers the most efficient use of
water and energy consumption.
To prevent limescale buildup inside
the appliance:
Refill the salt container whenever
necessary.
Use the recommended dosage of
the detergent and rinse aid.
Make sure that the current level of
the water softener agrees with the
hardness of the water supply.
Follow the instructions in the
chapter "Care and cleaning".
10.2 Using salt, rinse aid and
detergent
Only use salt, rinse aid and detergent
designed for dishwasher. Other
products can cause damage to the
appliance.
In areas with hard and very hard
water, we recommend to use basic
dishwasher detergent (powder, gel,
tablets containing no additional
agents), rinse aid and salt separately
for optimal cleaning and drying
results.
Detergent tablets do not fully dissolve
with short programmes. To prevent
detergent residues on the tableware,
we recommend that you use tablets
with long programmes.
Always use the correct quantity of
detergent. Insufficient dosage of
detergent can result in poor cleaning
results and hard-water filming or
spotting on the items. Using too much
detergent with soft or softened water
results in detergent residues on the
dishes. Adjust the amount of
detergent based on the water
hardness. Refer to the instructions on
the detergent packaging.
Always use the correct quantity of
rinse aid. Insufficient dosage of rinse
aid decreases the drying results.
Using too much rinse aid results in
bluish layers on the items.
Make sure that the water softener
level is correct. If the level is too high,
the increased quantity of salt in the
water might result in rust on cutlery.
10.3 What to do if you want to
stop using multi-tablets
Before you start to use separately
detergent, salt and rinse aid, complete
the following steps:
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a
rinsing phase. Do not add detergent
and do put dishes in the baskets.
ENGLISH 45
4. When the programme is complete,
adjust the water softener according
to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.
10.4 Loading the baskets
Always use the whole space of the
baskets.
Use the appliance to wash
dishwasher-safe items only.
Do not wash in the appliance items
made of wood, horn, aluminium,
pewter and copper as they could
crack, warp, get discoloured or pitted.
Do not wash in the appliance items
that can absorb water (sponges,
household cloths).
Put hollow items (cups, glasses and
pans) with the opening facing
downwards.
Make sure that glass items do not
touch each other.
Put light items in the upper basket.
Make sure that the items do not move
freely.
Put cutlery and small items in the
cutlery basket.
Move the upper basket upwards to
accommodate large items in the lower
basket.
Make sure that the spray arms can
move freely before you start a
programme.
10.5 Before starting a
programme
Before you start the selected
programme, make sure that:
The filters are clean and correctly
installed.
The cap of the salt container is tight.
The spray arms are not clogged.
There is enough salt and rinse aid
(unless you use multi-tablets).
The arrangement of the items in the
baskets is correct.
The programme is suitable to the type
of load and the degree of soil.
The correct quantity of detergent is
used.
10.6 Unloading the baskets
1. Let the tableware cool down before
you remove it from the appliance. Hot
items can be easily damaged.
2. First remove items from the lower
basket, then from the upper basket.
After the programme is
completed, water can still
remain on the inside
surfaces of the appliance.
11. CARE AND CLEANING
WARNING!
Before maintenance,
deactivate the appliance and
disconnect the mains plug
from the main socket.
Dirty filters and clogged
spray arms decrease the
washing results. Make a
check regularly and, if
necessary, clean them.
11.1 Cleaning the filters
The filter system is made of 3 parts.
C
B
A
www.aeg.com46
1. Turn the filter (B) counterclockwise
and remove it.
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5. Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter (A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter
(A). Turn it clockwise until it locks.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage
to the appliance.
11.2 Cleaning the lower spray
arm
We recommend to clean the lower spray
arm regularly to prevent soil from
clogging the holes.
Clogged holes can cause unsatisfactory
washing results.
1. To remove the lower spray arm, pull
it upwards.
ENGLISH 47
2. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes.
3. To install the spray arm back, press it
downwards.
11.3 Cleaning the upper
spray arms
We recommend to clean the upper spray
arms regularly to prevent soil from
clogging the holes. Clogged holes can
cause unsatisfactory washing results.
The upper spray arms are placed under
the upper basket. The spray arms (B) are
installed in the duct (A) with the
mounting elements (C).
A
B
C
1. Pull out the upper basket.
2. To detach the spray arm, turn the
mounting element clockwise.
3. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes.
4. To install the spray arm back, insert
the mounting element in the spray
arm and fix it in the duct by turning it
counterclockwise. Make sure that the
mounting element locks into place.
www.aeg.com48
11.4 Internal cleaning
Carefully clean the appliance,
including the rubber gasket of the
door, with a soft damp cloth.
To maintain the performance of your
appliance, use a cleaning product
designed specifically for dishwashers
at least once every two months.
Carefully follow the instructions on the
packaging of the product.
Use the programme for optimal
cleaning results.
Do not use abrasive products,
abrasive cleaning pads, sharp tools,
strong chemicals, scourer or solvents.
Using short-duration programmes
regularly can cause grease and
limescale buildup inside the
appliance. Run long-duration
programmes at least twice a month to
prevent the buildup.
11.5 Removal of foreign
objects
Check the filters and the sump after each
use of the dishwasher. Foreign objects
(e.g. pieces of glass, plastic, bones or
toothpicks, etc) decrease the cleaning
performance and can cause damage to
the drain pump.
1. Disassemble the filters system as
instructed in this chapter.
2. Remove any foreign objects by hand.
CAUTION!
If unable to remove the
objects, contact an
Authorised Service
Centre.
3. Reassemble the filters as instructed
in this chapter.
11.6 External cleaning
Clean the appliance with a moist soft
cloth.
Only use neutral detergents.
Do not use abrasive products,
abrasive cleaning pads or solvents.
12. TROUBLESHOOTING
WARNING!
Improper repair of the
appliance may pose a
danger to the safety of the
user. Any repairs must be
performed by qualified
personnel.
The majority of problems that may
occur can be solved without the need
to contact an Authorised Service
Centre.
Refer to the below table for information
on possible problems.
With some problems, the display shows
an alarm code.
Problem and alarm code Possible cause and solution
You cannot activate the ap‐
pliance.
Make sure that the mains plug is connected to the mains
socket.
Make sure that there is no damaged fuse in the fuse
box.
ENGLISH 49
Problem and alarm code Possible cause and solution
The programme does not
start.
Make sure that the appliance door is closed.
Press Start.
If the delay start is set, cancel the setting or wait for the
end of the countdown.
The appliance recharges the resin inside the water soft‐
ener. The duration of the procedure is approximately 5
minutes.
The appliance does not fill
with water.
The display shows i10 or
i11.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not
too low. For this information, contact your local water
authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clogged.
Make sure that the inlet hose has no kinks or bends.
The appliance does not
drain the water.
The display shows i20.
Make sure that the sink spigot is not clogged.
Make sure that the interior filter system is not clogged.
Make sure that the drain hose has no kinks or bends.
The anti-flood device is on.
The display shows i30.
Close the water tap.
Make sure that the appliance is correctly installed.
Make sure the baskets are loaded as instructed in the
user manual.
Malfunction of the water lev‐
el detection sensor.
The display shows i41 - i44.
Make sure that the filters are clean.
Switch the appliance off and on.
Malfunction of the wash
pump or the drain pump.
The display shows i51 - i59
or i5A - i5F.
Switch the appliance off and on.
The temperature of the wa‐
ter inside the appliance is
too high or malfunction of
the temperature sensor oc‐
curred.
The display shows i61 or
i69.
Make sure that the temperature of the inlet water does
not exceed 60°C.
Switch the appliance off and on.
Technical malfunction of the
appliance.
The display shows iC0 or
iC3.
Switch the appliance off and on.
The level of water inside the
appliance is too high.
The display shows iF1.
Switch the appliance off and on.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right
height above the floor. Refer to the installation instruc‐
tions.
www.aeg.com50
Problem and alarm code Possible cause and solution
The appliance stops and
starts more times during op‐
eration.
It is normal. It provides optimal cleaning results and en‐
ergy savings.
The programme lasts too
long.
If the delayed start option is set, cancel the delay setting
or wait for the end of the countdown.
The displayed programme
duration is different than the
duration in the consumption
values table.
Refer to the consumption values table in the chapter
"Programmes".
The remaining time in the
display increases and skips
nearly to the end of pro‐
gramme time.
This is not a defect. The appliance is working correctly.
Small leak from the appli‐
ance door.
The appliance is not levelled. Loosen or tighten the ad‐
justable feet (if applicable).
The appliance door is not centred on the tub. Adjust the
rear foot (if applicable).
The appliance door is diffi‐
cult to close.
The appliance is not levelled. Loosen or tighten the ad‐
justable feet (if applicable).
Parts of the tableware are protruding from the baskets.
The appliance door opens
during the wash cycle.
The AirDry function is activated. You can deactivate the
function. Refer to "Settings".
Rattling/knocking sounds
from inside the appliance.
The tableware is not properly arranged in the baskets.
Refer to basket loading leaflet.
Make sure that the spray arms can rotate freely.
The appliance trips the cir‐
cuit-beaker.
The amperage is insufficient to supply simultaneously all
the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian‐
ces in use.
Internal electrical fault of the appliance. Contact an Au‐
thorised Service Centre.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
WARNING!
We do not recommend using
the appliance until the
problem has been
completely fixed. Unplug the
appliance and do not plug it
in again until you are certain
that it operates correctly.
ENGLISH 51
12.1 The washing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results. Refer to "Daily use", "Hints and tips" and the basket
loading leaflet.
Use more intensive washing programme.
Activate the ExtraPower option to improve the washing
results of a selected programme.
Clean spray arm jets and filter. Refer to "Care and
Cleaning".
Poor drying results. Tableware was left for too long inside the closed appli‐
ance. Activate AirDry to set the automatic opening of
the door and to improve the drying performance.
There is no rinse aid or the dosage of rinse aid is not
sufficient. Fill the rinse aid dispenser or set the level of
rinse aid to a higher level.
The quality of the rinse aid can be the cause.
We recommend to use rinse aid always, even in com‐
bination with multi-tablets.
Plastic items may need to be towel dried.
The programme does not have the drying phase. Re‐
fer to "Programmes overview".
There are whitish streaks or
bluish layers on glasses and
dishes.
The released quantity of rinse aid is too high. Adjust
the rinse aid level to a lower level.
The quantity of detergent is too high.
There are stains and dry water
drops on glasses and dishes.
The released quantity of rinse aid is not sufficient. Ad‐
just the rinse aid level to a higher level.
The quality of the rinse aid can be the cause.
The interior of the appliance is
wet.
This is not a defect of the appliance. Humid air con‐
densates on the appliance walls.
Unusual foam during washing. Use the detergent designed specifically for dishwash‐
ers.
Use a detergent from a different manufacturer.
Do not pre-rinse dishes under running water before
putting them in the appliance.
Traces of rust on cutlery. There is too much salt in the water used for washing.
Refer to "The water softener".
Silver and stainless steel cutlery were placed together.
Do not put silver and stainless steel items close to‐
gether.
www.aeg.com52
Problem Possible cause and solution
There are residues of deter‐
gent in the dispenser at the
end of the programme.
The detergent tablet was stuck in the dispenser and
therefore was not completely washed away by water.
Water cannot wash away the detergent from the dis‐
penser. Make sure that the spray arms are not blocked
or clogged.
Make sure that items in the baskets do not impede the
lid of the detergent dispenser from opening.
Odours inside the appliance. Refer to "Internal cleaning".
Start the programme with a descaler or a cleaning
product designed for dishwashers.
Limescale deposits on the ta‐
bleware, on the tub and on the
inside of the door.
The level of salt is low, check the refill indicator.
The cap of the salt container is loose.
Your tap water is hard. Refer to "The water soften‐
er".
Use salt and set regeneration of the water softener
even when multi-functional tablets are used. Refer to
"The water softener".
Start the programme with a descaler designed for
dishwashers.
If limescale deposits still remain, clean the appliance
with appliance cleaners which are particularly suitable
for this purpose.
Try a different detergent.
Contact the detergent manufacturer.
Dull, discoloured or chipped
tableware.
Make sure that only dishwasher-safe items are wash‐
ed in the appliance.
Load and unload the basket carefully. Refer to the
basket loading leaflet.
Place delicate items in the upper basket.
Activate the GlassCare option to ensure special care
for glassware and delicate items.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
13. TECHNICAL INFORMATION
Dimensions Width / height / depth (mm) 446/850/615
Electrical connection
1)
Voltage (V) 220 - 240
Frequency (Hz) 50
Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)
ENGLISH 53
Water supply
Cold water or hot water
2)
max 60 °C
Capacity Place settings 9
Power consumption Left-on mode (W) 5.0
Off-mode (W) 0.50
1)
Refer to the rating plate for other values.
2)
If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply
to decrease energy consumption.
13.1 Link to the EU EPREL
database
The QR code on the energy label
supplied with the appliance provides a
web link to the registration of this
appliance in the EU EPREL database.
Keep the energy label for reference
together with the user manual and all
other documents provided with this
appliance.
It is possible to find information related to
the performance of the product in the EU
EPREL database using the link https://
eprel.ec.europa.eu and the model name
and product number that you can find on
the rating plate of the appliance. Refer to
the chapter "Product description".
For more detailed information about the
energy label, visit
www.theenergylabel.eu.
14. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
*
www.aeg.com54
www.aeg.com/shop
156949050-A-332020
1 / 1

AEG FFB62407ZM Handleiding

Categorie
Vaatwassers
Type
Handleiding

in andere talen