Zanussi ZDF26020WA Handleiding

Categorie
Vaatwassers
Type
Handleiding
GETTING
STARTED?
EASY.
User Manual
ZDF26020WA
NL Gebruiksaanwijzing 2
Afwasautomaat
EN User Manual 21
Dishwasher
GA NAAR ONZE WEBSITE VOOR:
Advies over gebruik, brochures, het oplossen van problemen, service- en reparatie-informa-
tie:
www.zanussi.com/support
VEILIGHEIDSINFORMATIE
Lees zorgvuldig de meegeleverde instructies voor installatie en
gebruik van het apparaat. De fabrikant is niet verantwoordelijk
voor verwondingen of schade die voortvloeit uit de onjuiste
installatie of het onjuiste gebruik. Bewaar de instructies altijd op
een veilige, toegankelijke plek voor toekomstig gebruik.
VEILIGHEID VAN KINDEREN EN KWETSBARE
MENSEN
Dit apparaat kan worden gebruikt door kinderen van 8 jaar en
ouder en door mensen met beperkte lichamelijke, zintuiglijke of
verstandelijke vermogens of een gebrek aan ervaring en kennis,
indien zij onder toezicht staan of instructies hebben gekregen
over het veilig gebruiken van het apparaat en indien zij de
eventuele gevaren begrijpen.
Kinderen tussen de 3 en 8 jaar oud en personen met zware en
complexe beperkingen dienen altijd uit de buurt van het
apparaat te worden gehouden, tenzij ze voortdurend onder
toezicht staan.
Kinderen jonger dan 3 jaar dienen, mits zij voortdurend onder
toezicht staan, bij het apparaat uit de buurt te worden
gehouden.
Laat kinderen niet met het apparaat spelen.
Houd reinigingsmiddelen uit de buurt van kinderen.
Houd kinderen en huisdieren uit de buurt van het apparaat als
de deur open is.
Kinderen mogen zonder toezicht geen reinigings- en
onderhoudswerkzaamheden aan het apparaat uitvoeren.
ALGEMENE VEILIGHEID
Dit apparaat is bedoeld voor gebruik in huishoudelijke en
soortgelijke toepassingen, zoals:
2
boerderijen; personeelskeukens in winkels, kantoren of
andere werkomgevingen;
door gasten in hotels, motels, bed&breakfasts- en andere
woonomgevingen.
De specificatie van dit apparaat niet wijzigen.
De waterdruk (minimaal en maximaal) moet liggen tussen 0.5
(0.05) / 8 (0.8) bar (MPa)
Volg het maximale aantal 13 plaatsen.
Als de voedingskabel beschadigd is, moet de fabrikant, een
erkende serviceverlener of een gekwalificeerd persoon deze
vervangen teneinde gevaarlijke situaties te voorkomen.
Leg het bestek in de besteklade met de scherpe randen naar
beneden of leg ze horizontaal in de besteklade met de scherpe
randen naar beneden.
Laat om ongelukken te voorkomen het apparaat niet onbeheerd
achter met open deur.
Schakel het apparaat uit en trek de stekker uit het stopcontact
voordat u onderhoudshandelingen verricht.
Gebruik geen waterstralen onder druk en/of stoom om het
apparaat te reinigen.
Als het apparaat is voorzien van ventilatieopeningen in de basis,
mogen deze niet worden afgedekt met bijv. een vloerkleed.
Het apparaat moet met de nieuwe slangset worden
aangesloten op een kraan. Oude slangsets mogen niet
opnieuw worden gebruikt.
VEILIGHEIDSVOORSCHRIFTEN
INSTALLATIE
WAARSCHUWING! Alleen een
erkende installatietechnicus mag het
apparaat installeren.
Verwijder alle verpakkingsmaterialen.
Installeer en gebruik geen beschadigd apparaat.
Volg de installatie-instructies die zijn
meegeleverd met het apparaat.
Pas altijd op bij verplaatsing van het apparaat,
want het is zwaar. Gebruik altijd
veiligheidshandschoenen en gesloten schoeisel.
Installeer of gebruik het apparaat niet op een
plek waar de temperatuur onder de 0 °C komt.
Installeer het apparaat op een veilige en
geschikte plaats die aan alle installatie-eisen
voldoet.
ELEKTRISCHE AANSLUITING
WAARSCHUWING! Gevaar voor
brand en elektrische schokken.
Dit apparaat moet worden aangesloten op een
geaard stopcontact.
Zorg ervoor dat de parameters op het
vermogensplaatje overeenkomen met
elektrische vermogen van de netstroom.
3
Gebruik altijd een juist geïnstalleerd
schokbestendig stopcontact.
Gebruik geen adapters met meerdere stekkers
en verlengkabels.
Zorg dat u de netstekker en het netsnoer niet
beschadigt. Indien de voedingskabel moet
worden vervangen, dan moet dit gebeuren door
onze Klantenservice.
Steek de stekker pas in het stopcontact als de
installatie is voltooid. Zorg ervoor dat het
netsnoer na installatie bereikbaar is.
Trek niet aan het netsnoer om het apparaat los
te koppelen. Trek altijd aan de stekker.
Dit apparaat is voorzien van een 13 A stekker.
Als de zekering van de stekker vervangen moet
worden, moet een ASTA (BS 1362)-zekering
van 13-ampère worden gebruikt (uitsluitend VK
en Ierland).
WATERAANSLUITING
Beschadig de waterslangen niet.
Indien buizen lang niet zijn gebruikt, er
reparaties hebben plaatsgevonden of er nieuwe
apparaten zijn geplaatst (watermeters, enz.),
moet u, voordat de nieuwe buizen worden
aangesloten, het water laten stromen tot het
schoon en helder is.
Zorg ervoor dat er geen zichtbare waterlekken
zijn tijdens en na het eerste gebruik van het
apparaat.
Als de watertoevoerslang beschadigd is, sluit
dan onmiddellijk de waterkraan en haal de
stekker uit het stopcontact. Neem contact op
met de service-afdeling om de
watertoevoerslang te vervangen.
GEBRUIK
Plaats geen ontvlambare producten of items die
vochtig zijn door ontvlambare producten in, bij of
op het apparaat.
Vaatwasmiddelen zijn gevaarlijk. Volg de
veiligheidsinstructies op de verpakking van het
vaatwasmiddel op.
Drink en speel niet met het water in het
apparaat.
Verwijder de vaat pas uit het apparaat als het
programma is voltooid. Er kan wat
vaatwasmiddel op de vaat achterblijven.
Oefen geen druk uit op de open deur van het
apparaat en leg er ook geen voorwerpen op.
Er kan hete stoom uit het apparaat komen als u
de deur opent terwijl een programma bezig is.
BINNENVERLICHTING
WAARSCHUWING! Gevaar voor
letsel.
Met betrekking tot de lamp(en) in dit product en
reservelampen die afzonderlijk worden verkocht:
Deze lampen zijn bedoeld om bestand te zijn
tegen extreme fysieke omstandigheden in
huishoudelijke apparaten, zoals temperatuur,
trillingen, vochtigheid, of zijn bedoeld om
informatie te geven over de operationele status
van het apparaat. Ze zijn niet bedoeld voor
gebruik in andere toepassingen en zijn niet
geschikt voor verlichting in huishoudelijke
ruimten.
Neem contact op met het service-centrum om
de binnenverlichting te vervangen.
SERVICE
Neem contact op met de erkende servicedienst
voor reparatie van het apparaat. Gebruik
uitsluitend originele reserveonderdelen.
Houd er rekening mee dat zelfreparatie of niet-
professionele reparatie gevolgen kan hebben
voor de veiligheid en de garantie kan doen
vervallen.
De volgende reserveonderdelen zijn
beschikbaar gedurende 7 jaar nadat het model
is stopgezet: motor, circulatie- en afvoerpomp,
verwarmingstoestellen en
verwarmingselementen, inclusief
warmtepompen, leidingen en aanverwante
apparatuur, waaronder slangen, kleppen, filters
en aquastops, structurele en interne onderdelen
met betrekking tot deurconstructies, printplaten,
elektronische displays, drukschakelaars,
thermostaten en sensoren, software en
firmware, inclusief resetsoftware. Houd er
rekening mee dat sommige van deze
reserveonderdelen alleen beschikbaar zijn voor
professionele reparateurs en dat niet alle
reserveonderdelen relevant zijn voor alle
modellen.
De volgende reserveonderdelen zullen
beschikbaar zijn gedurende 10 jaar nadat het
model is stopgezet: deurscharnieren en -
afdichtingen, andere afdichtingen, spuitarmen,
afvoerfilters, binnenrekken en plastic
randapparatuur zoals manden en deksels.
VERWIJDERING
WAARSCHUWING! Gevaar voor
letsel of verstikking.
Haal de stekker uit het stopcontact.
4
Snij het netsnoer van het apparaat af en gooi dit
weg.
Verwijder de deurgreep om te voorkomen dat
kinderen en huisdieren opgesloten raken in het
apparaat.
5
BEDIENINGSPANEEL
2
1
3
45
1
Aan/uit-toets
2
Display
3
Controlelampjes
4
Toets startuitstel
5
Programmatoetsen
INDICATIELAMPJES
Aanduiding Beschrijving
XtraDry-indicatielampje.
Glansmiddelindicatielampje. Dit indicatielampje is altijd uit als het programma in
werking is.
Zoutindicatielampje. Dit indicatielampje is altijd uit als het programma in werking is.
PROGRAMMA’S
De volgorde van de programma´s in de tabel geeft mogelijk niet hun volgorde op het bedieningspaneel
weer.
6
Programma
Vuilgraad
Type belading
Programmafasen
Verbruikswaarden
1)2)
Duur
(min)
Energie
(kWh)
Water
(l)
3)
Normale be-
vuiling
Serviesgoed
en bestek
Voorspoelen
Wassen op
50 °C
Spoelbeurten
Drogen
237
4)
/
237
5)
0.920
4)
/
0.936
5)
9.9
4)
/
9.9
5)
6)
Alles
Serviesgoed,
bestek, pot-
ten en pan-
nen
Voorspoelen
Wassen van
45 °C tot
70 °C
Spoelbeurten
Drogen
44 - 160 0.6 - 1.5 6 - 12
Zware bevui-
ling
Serviesgoed,
bestek, pot-
ten en pan-
nen
Voorspoelen
Wassen op
70 °C
Spoelbeurten
Drogen
155 - 171 1.5 - 1.7 14 - 15
7)
Recente be-
vuiling
Serviesgoed
en bestek
Wassen op
60 °C of
65 °C
Spoelbeurten
30 0.8 10
Normaal of
licht bevuild
Delicaat ser-
viesgoed en
glaswerk
Wassen op
45 °C
Spoelbeurten
Drogen
75 - 85 1.0 - 1.1 13 - 14
1) De druk en temperatuur van het water, de variaties in stroomtoevoer, de opties, de hoeveelheid vaat en
mate van vervuiling kunnen de verbruikswaarden veranderen.
2) De waarden van de programma’s, behalve voor ECO, zijn slechts een indicatie.
3) Dit programma heeft het meest efficiënte water- en energieverbruik voor normaal vervuild serviesgoed
en bestek. Dit is het standaardprogramma voor testinstituten. Dit programma wordt gebruikt voor de be-
oordeling van de naleving van Verordening (EU) 2019/2022 van de Commissie inzake ecologisch ontwerp.
4) Conform verordening 1016/2010.
5) Conform verordening 2019/2022.
6) Het apparaat detecteert de vuilgraad en het aantal voorwerpen in de rekken. De temperatuur, de hoe-
veelheid water, het energieverbruik en de programmaduur worden automatisch aangepast.
7) Dit programma is geschikt voor het wassen van een hele of een halve lading met recent vuil. Het zorgt in
een korte tijd voor goede wasresultaten.
AANWIJZINGEN VOOR TESTINSTITUTEN
Om de nodige informatie te ontvangen over het uitvoeren van prestatietesten (bijv. volgens EN60436 ),
stuurt u een e-mail naar:
7
Vermeld in uw verzoek de productnummercode (PNC) dat u op het typeplaatje aantreft.
Raadpleeg voor andere vragen betreffende uw vaatwasmachine het serviceboekje dat met uw apparaat is
meegeleverd.
INSTELLINGEN
PROGRAMMAKEUZE-MODUS
Als het apparaat in de programmakeuzemodus
staat, kan een wasprogramma worden ingesteld en
de gebruikersmodus worden ingegaan om de
apparaatinstellingen te wijzigen.
Druk op aan/uit om de programmakeuzemodus in te
gaan.
Het apparaat staat in de programmakeuzemodus
als de programma-indicator aan is en op
het display de programmaduur staat.
Als het bedieningspaneel niet aangeeft dat het
apparaat in de programmakeuzemodus staat, volg
dan de procedure voor Reset.
RESET-FUNCTIE
Gebruik Reset om:
Reset het huidig draaiende programma.
Het aftellen te stoppen van de Delay-optie.
Het apparaat terug te zetten in de
programmakeuzemodus.
Om te Reset houdt u
en ingedrukt
tot het apparaat in de programmakeuzemodus
staat.
GEBRUIKERSMODUS
Gebruikersmodus laat u de volgende instellingen
wijzigen:
Het niveau van de waterverzachter afstemmen
op de waterhardheid.
De aanduiding leeg glansmiddelreservoir in- of
uitschakelen.
AirDry in- of uitschakelen.
Zorg ervoor dat het apparaat in de
programmakeuzemodus staat voordat u de
gebruikersmodus ingaat.
1. Houd
en ingedrukt.
De indicatielampjes ,
en knipperen.
Omdat het apparaat de instellingen opslaat, hoeft u
deze niet bij aanvang van iedere cyclus te
configureren.
DE WATERONTHARDER INSTELLEN
Zorg dat het apparaat in de gebruikersmodus staat:
1. Druk op .
De indicatielampjes en zijn
uit.
Het indicatielampje blijft
knipperen.
Het display toont de huidige instelling: bijv.
= niveau 5.
2. Druk op om de instelling te wijzigen.
Bij iedere druk op de knop wordt het niveau
met een verhoogd. Als niveau 10 wordt bereikt,
begint het tellen weer vanaf niveau 1.
3. Druk op aan/uit om de instelling te bevestigen.
Indien u gebruik maakt van
multitabletten die zout bevatten en de
waterhardheid lager is dan 21°dH,
kunt u het laagste
wateronthardingsniveau instellen. Het
deactiveert de aanduiding voor het
bijvullen van zout.
Indien u gebruik maakt van standaard
vaatwasmiddel of multitabletten zonder
zout, stel dan het waterhardheidniveau
juist in om de aanduiding voor het
bijvullen van zout actief te laten.
DE WATERHARDHEIDTABEL
De waterontharder verwijdert mineralen van de
watertoevoer die een nadelige invloed hebben op
de wasresultaten en het apparaat.
Hoe hoger het gehalte van deze mineralen, des te
harder is het water. De waterhardheid wordt
gemeten in de volgende gelijkwaardige schalen.
De waterontharder moet worden afgesteld op de
hardheid van het water in uw woonplaats. Uw
waterleidingbedrijf kan u informeren over de
hardheid van het water in uw woonplaats. Het is
belangrijk om het correcte niveau voor de
waterontharder in te stellen voor goede
wasresultaten.
8
Waterhardheid
Duitse hardheid
(°dH)
Franse hardheid
(°fH)
mmol/l
Clarke-hard-
heid
Wateronthardingsni-
veau
47 - 50 84 - 90 8,4 - 9,0 58 - 63 10
43 - 46 76 - 83 7,6 - 8,3 53 - 57 9
37 - 42 65 - 75 6,5 - 7,5 46 - 52 8
29 - 36 51 - 64 5,1 - 6,4 36 - 45 7
23 - 28 40 - 50 4,0 - 5,0 28 - 35 6
19 - 22 33 - 39 3,3 - 3,9 23 - 27
5
1)
15 - 18 26 - 32 2,6 - 3,2 18 - 22 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 2
<4 <7 <0,7 < 5
1
2)
1) Fabrieksinstelling.
2) Gebruik geen zout op dit niveau.
Stel ongeacht het gebruikte soort wasmiddel
het juiste waterhardheidniveau in om de
bijvulindicator voor zout geactiveerd te
houden.
Multivaatwastabletten die zout
bevatten zijn niet effectief genoeg als
waterontharder.
Regeneratieproces
Voor de juiste werking van de waterontharder moet
de hars van de ontharder regelmatig worden
geregenereerd. Dit proces is automatisch en maakt
deel uit van de normale vaatwasmachinewerking.
Wanneer de voorgeschreven hoeveelheid water (zie
waarden in de tabel) is gebruikt sinds het vorige
regeneratieproces, wordt een nieuw
regeneratieproces gestart tussen de laatste
spoeling en het einde van het programma.
Wateronthardingsni-
veau
Hoeveelheid water (l)
1 250
2 100
3 62
Wateronthardingsni-
veau
Hoeveelheid water (l)
4 47
5 25
6 17
7 10
8 5
9 3
10 3
In het geval van de hoge wateronthardersinstelling
kan dit ook in het midden van het programma
gebeuren, vóór het spoelen (tweemaal tijdens een
programma). De start van de regeneratie heeft
geen invloed op de cyclusduur, tenzij deze
plaatsvindt in het midden van een programma of
aan het einde van een programma met een korte
droogfase. In dat geval verlengt de regeneratie de
totale duur van een programma met nog eens 5
minuten.
Vervolgens kan het spoelen van de waterontharder
wat 5 minuten duurt, beginnen in dezelfde cyclus of
aan het begin van het volgende programma. Deze
9
activiteit verhoogt het totale waterverbruik van een
programma met 4 liter en het totale energieverbruik
van een programma met 2 Wh. Het spoelen van de
waterontharder eindigt met een volledige afvoer.
Elke uitgevoerde waterontharderspoeling (mogelijk
meer dan één in dezelfde cyclus) kan de
programmaduur met nog eens 5 minuten verlengen
wanneer deze op enig moment aan het begin of in
het midden van een programma plaatsvindt.
Alle in deze paragraaf genoemde
verbruikswaarden worden bepaald
volgens de huidige geldende norm in
laboratoriumomstandigheden met
waterhardheid 2,5 mmol/l volgens de
verordening 2019/2022
(waterontharder: niveau 3).
De druk en de temperatuur van het
water en de variaties van de
netvoeding kunnen de waarden
veranderen.
DE AANDUIDING LEEG
GLANSMIDDELRESERVOIR DEACTIVEREN
Zorg dat het apparaat in de gebruikersmodus staat:
1. Druk op .
De indicatielampjes
en zijn uit.
Het indicatielampje knippert.
Het display toont de huidige instelling:
= aanduiding glansmiddelreservoir
leeg geactiveerd.
= aanduiding
glansmiddelreservoir leeg
gedeactiveerd.
2. Druk op om de instelling te
wijzigen.
3. Druk op aan/uit om de instelling te bevestigen.
Als het glansmiddelreservoir leeg is,
gaat de glansmiddelindicator branden
om aan te geven dat u glansmiddel
moet bijvullen. Als u multitabletten
gebruikt die glansmiddel bevatten en u
tevreden bent met het droogresultaat,
kunt u de aanduiding uitschakelen. We
raden u echter aan voor de beste
droogresultaten altijd glansmiddel te
gebruiken.
Schakel de aanduiding in om de
glansmiddelindicator actief te houden
als u standaard wasmiddel of
multitabletten zonder glansmiddel
bevat.
DEACTIVEREN AIRDRY
AirDry biedt goede droogresultaten met minder
energieverbruik.
Tijdens de werking van de droogfase,
wordt de deur van het apparaat door
het instrument geopend. De deur blijft
op een kier.
Standaard is AirDry bij alle programma's
geactiveerd, behalve (indien van toepassing),
maar het kan worden gedeactiveerd.
Zorg dat het apparaat in de gebruikersmodus staat.
1. Druk op .
De controlelampjes en
zijn uit.
Het controlelampje
knippert.
Het display toont de huidige instelling:
= AirDry ingeschakeld.
=AirDry gedeactiveerd.
2. Druk op om de instelling te wijzigen.
3. Druk op aan/uit om de instelling te bevestigen.
LET OP! Als het apparaat toegankelijk
is voor kinderen, adviseren wij u om
AirDry te deactiveren, omdat het
openen van de deur gevaarlijk kan zijn.
10
VOORDAT U HET APPARAAT VOOR DE EERSTE KEER GEBRUIKT
1. Controleer of het ingestelde niveau van
de waterontharder juist is voor de
waterhardheid in uw omgeving. U kunt
het niveau van de waterontharder
instellen. Neem contact op met uw
plaatselijke waterinstantie voor
informatie over de hardheid van het water
in uw omgeving.
2. Vul het zoutreservoir met speciaal zout voor
vaatwassers.
3. Vul het glansmiddeldoseerbakje met
glansmiddel.
4. Draai de waterkraan open.
5. Start een programma om resten te verwijderen
die misschien nog in het apparaat zijn
achtergebleven. Gebruik geen afwasmiddel en
gebruik de mandjes niet.
ZOUT TOEVOEGEN
Doe voor het eerste gebruik één liter water in het zoutreservoir.
LET OP! Water en zout kunnen uit het zoutreservoir stromen als u het bijvult. Om
roestvorming te voorkomen, dient er onmiddellijk na het vullen van het zoutreservoir een
programma gestart te worden.
GLANSMIDDEL TOEVOEGEN
2
1
4
3
2
1
Met glansspoelmiddel wordt het serviesgoed zonder vlekken of strepen gedroogd. Het wordt automatisch
vrijgegeven tijdens de warme spoelfase.
DAGELIJKS GEBRUIK
1. Draai de waterkraan open.
2. Druk op de aan-/uittoets om het apparaat te
activeren.
Zorg dat het apparaat in de keuzemodus
Programma staat.
Vul het zoutreservoir als het
zoutindicatielampje brandt.
Vul het glansmiddeldoseerbakje als het
indicatielampje van het glansmiddel brandt.
3. Ruim de korven in.
4. Voeg vaatwasmiddel toe.
5. U dient het juiste programma in te stellen en te
starten voor het type lading en de mate van
vervuiling.
11
AFWASMIDDEL TOEVOEGEN
2
1
Plaats een kleine hoeveelheid van het vaatwasmiddel in de binnenkant van de deur van het apparaat als het
programma een voorwasfase heeft.
MULTITABLETTEN TOEVOEGEN
2
1
Stel de waterontharder op het laagste niveau in.
DE AUTO OFF-FUNCTIE
Deze functie verlaagt het energieverbruik door het
apparaat automatisch uit te schakelen als het niet
werkt.
De functie gaat werken:
5 minuten na voltooiing van het programma.
Als het programma na 5 minuten nog niet is
gestart.
EEN PROGRAMMA STARTEN
1. Laat de deur op een kier staan.
2. Druk op Aan/uit om het apparaat te activeren.
Zorg dat het apparaat in de keuzemodus
Programma staat.
3. Druk op de toets van het desbetreffende
programma dat u wilt starten. Het gerelateerde
programmalampje knippert en het display toont
de programmaduur.
4. Stel de bruikbare opties in.
5. Sluit de deur van de afwasmachine om het
programma te starten.
XTRADRY OPTIE
Activeer deze optie als u het droogresultaat een
boost wilt geven. Bij het gebruik van deze optie
kunnen de duur van sommige programma's, het
waterverbruik en de temperatuur van de laatste
spoeling worden beïnvloed.
De optie XtraDry is een permanente optie voor alle
programma's anders dan en hoeven niet
iedere cyclus te worden gekozen.
ACTIVERING VAN XTRADRY
Zorg dat het apparaat in de keuzemodus
Programma staat.
Inschakelen van XtraDry:
12
1. Houd en gelijktijdig ingedrukt tot het
indicatielampje gaat branden.
2. Selecteer een programma.
3. Stel de optie Delay in.
4. Sluit de deur van de afwasmachine om het
programma te starten.
Als het programma eenmaal van start
gaat, kan XtraDry niet worden
geactiveerd.
DELAY OPTIE
1. Stel een programma in.
2. Druk op Delay tot op het display het gewenste
startuitstel verschijnt (1-24u).
De uitgestelde tijd knippert op het display.
3. Sluit de deur van het apparaat. Het aftellen
neemt met 1 uur af.
Nadat het aftelproces voltooid is, wordt het
programma gestart.
DE DEUR OPENEN ALS HET APPARAAT IN
WERKING IS
Als u de deur opent terwijl een programma loopt,
stopt het apparaat. Dit kan het energieverbruik en
de programmaduur beïnvloeden. Als u de deur
weer sluit, gaat het apparaat verder vanaf het
moment van onderbreking.
Als u tijdens de droogfase de deur
opent voordat AirDry deze automatisch
opent, wordt het programma na 30
seconden afgesloten.
Als u de deur sluit nadat deze in de
droogfase automatisch door AirDry is
geopend, wordt het programma na 3
minuten beëindigd.
Probeer de deur van het apparaat niet
binnen 2 minuten nadat AirDry hem
automatisch opent te openen, want dit
kan schade aan het apparaat
veroorzaken.
EINDE VAN HET PROGRAMMA
Nadat het programma is voltooid, verschijnt op het
display: 0:00.
Druk op de aan/uit-toets of wacht totdat de
Auto OFF-functie het apparaat automatisch
heeft uitgeschakeld.
Draai de waterkraan dicht.
Als u de deur opent voor de activering
van Auto OFF, wordt het apparaat
automatisch uitgeschakeld.
AANWIJZINGEN EN TIPS
ALGEMEEN
Volg de onderstaande tips om te zorgen voor
optimale schoonmaak- en droogresultaten en ook
het milieu te helpen beschermen.
Het afwassen in de vaatwasser volgens de
instructies in de gebruikershandleiding verbruikt
meestal minder water en energie dan het
afwassen met de hand.
Laad de vaatwasser volledig in om water en
energie te besparen. Voor de beste
reinigingsresultaten plaatst u items in de korven
volgens de instructies in de
gebruikershandleiding en overbelast u de korven
niet.
Spoel de vaat niet eerst af. Het verhoogt het
water- en energieverbruik. Kies indien nodig een
programma met voorwasfase.
Verwijder grotere voedselresten van de borden
en lege bekers en glazen voordat u ze in het
apparaat plaatst.
Week kookgerei met stevig vastgekookt of
vastgebakken voedsel of poets het lichtjes
voordat u het in het apparaat wast.
Zorg ervoor dat de vaat in de manden elkaar
niet raakt of overlapt. Alleen dan kan het water
de vaat volledig bereiken en wassen.
U kunt apart vaatwasmiddel, glansmiddel en
zout gebruiken of kiezen voor het gebruik van
multitabletten (bijv. ''alles-in-1''). Volg de
instructies op de verpakking.
Kies een programma op basis van het type
lading en de mate van bevuiling. biedt
het meest efficiënte gebruik van water en
energieverbruik.
Om kalkaanslag in het apparaat te voorkomen:
Vul de zoutcontainer indien nodig bij.
Gebruik de aanbevolen dosering van het
wasmiddel en spoelglansmiddel.
Controleer of het ingestelde stand van de
waterontharder juist is voor de
waterhardheid in uw omgeving.
Volg de instructies in het hoofdstuk
"Onderhoud en reiniging".
13
DE WATERONTHARDER
De waterontharder verwijdert mineralen uit van de
watertoevoer die een nadelige invloed hebben op
de wasresultaten en het apparaat.
Hoe hoger het gehalte van deze mineralen, des te
harder is het water. De waterhardheid wordt
gemeten in de volgende gelijkwaardige schalen.
De waterontharder moet worden afgesteld op de
hardheid van het water in uw woonplaats. Uw
waterleidingbedrijf kan u informeren over de
hardheid van het water in uw woonplaats. Het is
belangrijk om het correcte niveau voor de
waterontharder in te stellen voor goede
wasresultaten.
GEBRUIK VAN ZOUT, GLANSMIDDEL EN
VAATWASMIDDEL
Gebruik enkel zout, glansmiddel en
vaatwasmiddel voor afwasautomaten. Overige
producten kunnen het apparaat beschadigen.
Maar in gebieden met hard en erg hard water
raden we het gebruik aan van enkelvoudig
vaatwasmiddel (poeder, gel, tabletten zonder
extra middelen), met afzonderlijk glansmiddel en
zout voor optimale reinigings- en
droogresultaten.
Draai het apparaat minstens eenmaal per maand
met een apparaatreiniger die hier speciaal voor
bestemd is.
Vaatwasmiddeltabletten lossen bij korte
programma's niet geheel op. Om te voorkomen
dat vaatwasmiddelresten op het servies
achterblijven, raden we u aan om tabletten enkel
bij lange programma's te gebruiken.
Gebruik altijd de juiste hoeveelheid wasmiddel.
Onvoldoende dosering van het wasmiddel kan
leiden tot slechte reinigingsresultaten en
hardwaterfilmen of vlekken op de voorwerpen.
Het gebruik van te veel wasmiddel met zacht of
verzacht water resulteert in wasmiddelresten op
de borden. Pas de hoeveelheid wasmiddel aan
op basis van de waterhardheid. Zie de
instructies van de vaatwasmiddelfabrikant.
Gebruik altijd de juiste hoeveelheid
spoelglansmiddel. Onvoldoende dosering van
spoelglansmiddel vermindert de
droogresultaten. Het gebruik van te veel
spoelglansmiddel resulteert in blauwachtige
lagen op de items.
Controleer of het wateronthardersniveau correct
is. Als het niveau te hoog is, kan de verhoogde
hoeveelheid zout in het water leiden tot roest op
bestek.
WAT MOET U DOEN ALS U WILT STOPPEN
MET HET GEBRUIK VAN MULTITABLETTEN
Doe het volgende voordat u begint met het
gebruiken van apart wasmiddel, zout en
glansmiddel.
1. Stel het hoogste niveau van de waterontharder
in.
2. Zorg ervoor dat het zout- en het
glansmiddeldoseerbakje gevuld zijn.
3. Start het kortste programma met een
spoelfase. Voeg geen afwasmiddel toe en ruim
de mandjes niet in.
4. Als het programma is voltooid, wijzigt u de
waterontharder in de waterhardheid van uw
omgeving.
5. Stel de hoeveelheid glansmiddel in.
6. De aanduiding leeg glansmiddelreservoir
activeren.
DE MANDJES INRUIMEN
Gebruik altijd de hele ruimte van de mandjes.
Gebruik het apparaat alleen om voorwerpen af
te wassen die vaatwasbestendig zijn.
Was in het apparaat geen items gemaakt van
hout, hoorn, aluminium, tin en koper, omdat ze
kunnen barsten, kromtrekken, verkleuren of
putjes kunnen krijgen.
Reinig geen voorwerpen in het apparaat die
water kunnen absorberen (sponzen,
keukenhanddoeken).
Verwijder alle voedselresten van de voorwerpen.
Maak aangebrande voedselresten op de
voorwerpen zachter.
Plaats holle voorwerpen (bijv. kopjes, glazen en
pannen) met de opening naar beneden.
Zorg dat serviesgoed en bestek niet in elkaar
schuiven. Meng lepels met ander bestek.
Zorg er voor dat glazen andere glazen niet
aanraken.
Leg lichte voorwerpen in het bovenrek. Zorg
ervoor dat de voorwerpen niet verschuiven.
Zorg er voor dat de sproeiarm vrij kan
ronddraaien voordat u een programma start.
VOOR HET STARTEN VAN EEN
PROGRAMMA
Zorg er, voordat u het gekozen programma start,
voor dat:
De filters schoon zijn en correct zijn geplaatst.
De dop van het zoutreservoir goed dicht zit.
De sproeiarmen niet zijn verstopt.
Er regenereerzout en glansmiddel is
toegevoegd (tenzij u gecombineerde
afwastabletten gebruikt).
De positie van de items in de mandjes correct
is.
14
Het programma geschikt is voor het type lading
en de mate van bevuiling.
De juiste hoeveelheid afwasmiddel is gebruikt.
DE REKKEN UITRUIMEN
1. Laat de borden afkoelen voordat u deze uit het
apparaat neemt. Hete borden zijn gevoelig voor
beschadigingen.
2. Ruim eerst het onderrek en dan het bovenrek
uit.
Na voltooiing van het programma kan
er zich aan de binnenkant van het
apparaat nog water bevinden.
ONDERHOUD EN REINIGING
WAARSCHUWING! Schakel het
apparaat uit en trek de stekker uit het
stopcontact voordat u
onderhoudshandelingen verricht.
Vuile filters en verstopte sproeiarmen
verminderen de wasresultaten.
Controleer regelmatig de filters en
reinig deze zo nodig.
DE FILTERS REINIGEN
B
A
C
Zorg ervoor dat er geen etensresten of vuil in of rond de rand van de opvangbak zitten.
Plaats de platte filter (C) terug. Zorg ervoor dat het goed onder de 2 geleidingen zit.
Plaats de filters (A) en (B) terug.
Plaats de filter (A) terug in de platte filter (C). Rechtsom draaien tot het vastzit.
Een onjuiste plaatsing van de filters kan leiden tot slechte wasresultaten en het apparaat
beschadigen.
DE SPROEIARMEN REINIGEN
Probeer niet de sproeiarmen te verwijderen. Als
etensresten de openingen in de sproeiarmen
hebben verstopt, verwijder deze dan met een smal
en puntig voorwerp.
BUITENKANT REINIGEN
Maak het apparaat schoon met een vochtige,
zachte doek.
Gebruik alleen neutrale schoonmaakmiddelen.
Gebruik geen schuurmiddelen, schuursponsjes
of oplosmiddelen.
DE BINNENKANT VAN DE MACHINE
REINIGEN
Reinig het apparaat zorgvuldig, inclusief de
rubberen afdichting van de deur, met een
zachte, vochtige doek.
Als u regelmatig korte programma's gebruikt
dan kunnen er vetresten en kalkaanslag
15
achterblijven in het apparaat. Om dit te
voorkomen raden we aan minstens 2 keer per
maand progamma's met een lange duur te
gebruiken.
Om de prestaties van uw apparaat op en top te
houden raden we u aan iedere maand een
specifiek schoonmaakproduct voor
vaatwasmachines te gebruiken. Volg de
instructies op de verpakking van de producten
zorgvuldig op.
VERWIJDEREN VAN VREEMDE
VOORWERPEN
Controleer de filters en de opvangbak na elk
gebruik van de vaatwasser. Vreemde voorwerpen
(bijv. stukken glas, plastic, botten of tandenstokers,
enz.) verminderen de reinigingsprestaties en
kunnen schade aan de afvoerpomp veroorzaken.
1. Demonteer het filtersysteem volgens de
instructies in dit hoofdstuk.
2. Verwijder alle vreemde voorwerpen met de
hand.
LET OP! Als u de voorwerpen niet
kunt verwijderen, neem dan
contact op met een erkend
servicecentrum.
3. Monteer de filters opnieuw volgens de
instructies in dit hoofdstuk.
PROBLEEMOPLOSSING
WAARSCHUWING! Onjuiste
reparatie van het apparaat kan een
gevaar voor de veiligheid van de
gebruiker vormen. Reparaties moeten
worden uitgevoerd door
gekwalificeerd personeel.
Het merendeel van de problemen die
ontstaan kunnen worden opgelost zonder
contact op te nemen met een erkend
servicecentrum.
Zie de onderstaande tabel voor informatie over
mogelijke problemen.
Bij sommige problemen toont het display een
alarmcode.
Probleem en alarmcode Mogelijke oorzaak en oplossing
U kunt het apparaat niet in-
schakelen.
Controleer of de stekker is aangesloten op het stopcontact.
Controleer of er geen beschadigde zekering in het zekeringen-
kastje is.
Het programma start niet. Controleer of de deur van het apparaat gesloten is.
Als de optie uitgestelde start is ingesteld, annuleert u de instel-
ling of wacht u totdat het aftellen voorbij is.
Het apparaat herlaadt de hars uit de waterontharder. De duur
van de procedure is ongeveer 5 minuten.
Het apparaat wordt niet met
water gevuld.
Op het display verschijnt i10 of
i11.
Controleer of de waterkraan geopend is.
Controleer of de druk van de watervoorziening niet te laag is.
Neem voor deze informatie contact op met uw plaatselijke wa-
terleidingbedrijf.
Controleer of de waterkraan niet verstopt is.
Controleer of het filter in de toevoerslang niet verstopt is.
Controleer of de toevoerslang geen knikken of bochten heeft.
De machine pompt geen water
weg.
Op het display verschijnt i20.
Controleer of de gootsteenafvoer niet verstopt is.
Controleer of het binnenfiltersysteem niet verstopt is.
Controleer of de afvoerslang geen knikken of bochten heeft.
16
Probleem en alarmcode Mogelijke oorzaak en oplossing
De anti-overstromingsbeveili-
ging is ingeschakeld.
Op het display verschijnt i30.
Draai de waterkraan dicht.
Controleer of het apparaat correct geïnstalleerd is.
Controleer of de korven zijn geladen volgens de instructies in
de gebruikershandleiding.
Storing van de waterniveau de-
tectiesensor.
Op het display verschijnt i41 -
i44.
Controleer of de filters schoon zijn.
Schakel het apparaat uit en aan.
Storing van de waspomp of de
afvoerpomp.
Op het display verschijnt i51 -
i59 of i5A - i5F.
Schakel het apparaat uit en aan.
De temperatuur van het water
in het apparaat is te hoog of er
is een storing in de tempera-
tuursensor opgetreden.
Op het display verschijnt i61 of
i69.
Controleer of de temperatuur van het toegevoerde water niet
hoger is dan 60 °C.
Schakel het apparaat uit en aan.
Technische storing van het ap-
paraat.
Op het display verschijnt iC0
of iC3.
Schakel het apparaat uit en aan.
Het niveau van het water in het
apparaat is te hoog.
Op het display verschijnt iF1.
Schakel het apparaat uit en aan.
Controleer of de filters schoon zijn.
Controleer of de afvoerslang op de juiste hoogte boven de
vloer is geïnstalleerd. Raadpleeg de installatie-instructies.
Het apparaat stopt en begint
meerdere keren tijdens de
werking.
Dat is normaal. Het zorgt voor optimale reinigingsresultaten en
energiebesparing.
Het programma duurt te lang. Als de optie uitgestelde start is ingesteld, annuleert u deze
functie of wacht u tot het aftellen is voltooid.
De weergegeven programma-
duur is anders dan de duur in
de tabel verbruikswaarden.
Raadpleeg de tabel verbruikswaarden in het hoofdstuk "Pro-
gramma’s".
De resterende duur in het dis-
play wordt verlengd en scha-
kelt bijna naar het eind van de
programmatijd.
Dit is geen defect. Het apparaat werkt correct.
Kleine lekkage van de deur van
het apparaat.
Het apparaat staat niet waterpas. Draai aan de verstelbare
pootjes (indien van toepassing).
De deur van het apparaat is niet centraal uitgelijnd op de kuip.
Verstel de achterpoot (indien van toepassing).
De deur van het apparaat is
moeilijk te sluiten.
Het apparaat staat niet waterpas. Draai aan de verstelbare
pootjes (indien van toepassing).
Delen van het serviesgoed steken uit de korven.
17
Probleem en alarmcode Mogelijke oorzaak en oplossing
De deur van het apparaat gaat
open tijdens de wascyclus.
De AirDry functie is geactiveerd. U kunt de functie uitschakelen.
Raadpleeg "Instellingen".
Ratelende/kloppende geluiden
vanuit het apparaat.
Het serviesgoed is niet juist in de korven gerangschikt. Raad-
pleeg de folder voor het laden van de korven.
Controleer of de sproeiarmen vrij kunnen ronddraaien.
Het apparaat maakt kortslui-
ting.
De stroomsterkte is niet voldoende om alle apparaten tegelij-
kertijd te voeden. Controleer de stroomsterkte van het stopcon-
tact en de capaciteit van de meter of schakel een van de appa-
raten die in gebruik zijn uit.
Interne elektrische storing van het apparaat. Neem contact op
met de servicedienst.
Raadpleeg "Voor het eerste
gebruik", "Dagelijks gebruik", of
"Aanwijzingen en tips" voor andere
mogelijke oorzaken.
Schakel het apparaat uit en weer in als u het
apparaat hebt gecontroleerd. Als het probleem
opnieuw optreedt, neemt u contact op met een
erkend servicecentrum.
Voor alarmcodes die niet in de tabel worden
beschreven, neemt u contact op met een erkend
servicecentrum.
WAARSCHUWING! We raden u aan
om het apparaat niet te gebruiken
totdat het probleem volledig is
opgelost. Haal de stekker uit het
stopcontact en sluit het apparaat pas
weer aan als u zeker weet dat het
correct werkt.
DE WAS- EN DROOGRESULTATEN ZIJN NIET NAAR TEVREDENHEID
Probleem Mogelijke oorzaak en oplossing
Slechte wasresultaten. Raadpleeg "Dagelijks gebruik", "Aanwijzingen en tips"
en de folder voor het laden van de korf.
Gebruik intensievere wasprogramma´s.
Maak de inspuiters van de sproeiarm en het filter schoon. Zie
"Onderhoud en reiniging".
Slechte droogresultaten. Serviesgoed heeft te lang in het gesloten apparaat gestaan.
Het glansmiddel is op of de dosering van glansmiddel is niet
voldoende. Stel de dosering van het glansmiddel in op een
hogere stand.
Plastic voorwerpen moeten mogelijk met een doek worden
afgedroogd.
Activeer voor de beste droogprestatie de optie XtraDry en
stel AirDry in.
We raden aan altijd glansmiddel te gebruiken, zelfs in combi-
natie met wastabletten.
Witte strepen of een blauwe
waas op glazen en serviesgoed.
De vrijgegeven hoeveelheid glansmiddel is te hoog. Zet de
dosering van het glansmiddel op een lagere stand.
Er is te veel vaatwasmiddel gebruikt.
18
Probleem Mogelijke oorzaak en oplossing
Vlekken en opgedroogde water-
vlekken op glazen en servies.
De vrijgegeven hoeveelheid glansmiddel is te laag. Zet de
dosering van het glansmiddel op een hogere stand.
De kwaliteit van het glansmiddel kan de oorzaak zijn.
Het serviesgoed is nat. Activeer voor de beste droogprestatie de optie XtraDry en
stel AirDry in.
Het programma heeft geen droogfase of heeft een droogfase
met lage temperatuur.
Het glansmiddeldoseerbakje is leeg.
De kwaliteit van het glansmiddel kan de oorzaak zijn.
De kwaliteit van de multitabletten kan de oorzaak zijn. Pro-
beer een ander merk of activeer het glansmiddeldoseerbakje
en gebruik het glansmiddel samen met de multitabletten.
De binnenkant van het apparaat
is nat.
Dit is geen fout van het apparaat. Het wordt veroorzaakt door
de vochtigheid in de lucht die tegen de wanden condenseert.
Opvallend veel schuim tijdens
het wassen.
Gebruik alleen wasmiddel voor afwasautomaten.
Het glansmiddeldoseerbakje is lek. Neem contact op met de
klantenservice.
Roestresten op bestek. Er wordt voor het wassen teveel zout in het water gebruikt.
Zie 'De waterontharder instellen'.
Zilver en roestvrijstalen bestek zijn samen geplaatst. Zet zilve-
ren en roestvrijstalen voorwerpen niet dicht bij elkaar.
Er bevinden zich aan het einde
van het programma resten van
vaatwasmiddel in het vaatwas-
middeldoseerbakje.
De vaatwastablet raakte klem in het vaatwasmiddeldoseer-
bakje en is daardoor niet volledig weggespoeld door het wa-
ter.
Het water kan het vaatwasmiddel niet uit het vaatwasmiddel-
doseerbakje spoelen. Zorg ervoor dat de bovenste sproeiarm
niet geblokkeerd of verstopt is.
Zorg dat voorwerpen in de rekken het openen van het klepje
van het afwasmiddeldoseerbakje niet kunnen belemmeren.
Geuren in het apparaat. Raadpleeg "Reiniging binnenkant".
Kalkresten op het serviesgoed,
op de kuip en aan de binnenkant
van de deur.
Het zoutniveau is laag, controleer de bijvulaanduiding.
De dop van het zoutreservoir zit los.
U heeft hard kraanwater. Zie 'De waterontharder instel-
len'.
Gebruik zelfs met multitabletten zout en stel de wateronthar-
der in. Zie 'De waterontharder instellen'.
Indien de kalkaanslag blijft bestaan, reinigt u het apparaat
met reinigingsmiddelen die hier speciaal voor zijn bestemd.
Probeer een ander wasmiddel.
Neem contact op met de wasmiddelfabrikant.
Dof, ontkleurd of afgeschilverd
serviesgoed.
Zorg dat alleen vaatwasmachinebestendige voorwerpen in
het apparaat worden gewassen.
Laad de korf voorzichtig in en uit. Raadpleeg de folder voor
het laden van de korven.
Leg tere voorwerpen in de bovenkorf.
19
Raadpleeg "Voor het eerste
gebruik", "Dagelijks gebruik" of
"Aanwijzingen en tips" voor
mogelijke andere oorzaken.
TECHNISCHE INFORMATIE
Afmetingen Breedte / hoogte / diepte
(mm)
600 / 850 / 625
Elektrische aansluiting
1) Spanning (V) 220 - 240
Frequentie (Hz) 50
Watertoevoerdruk Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)
Watertoevoer
Koud water of warm water
2) max. 60°C
Capaciteit Plaatsinstellingen 13
Stroomverbruik
3) Sluimerstand (W) 5.0
Uit-stand (W) 0.50
1) Zie het typeplaatje voor andere waarden.
2) Als het hete water door een alternatieve energiebron wordt geproduceerd (bijv. zonnepanelen), gebruik
dan de heetwatervoorziening om het energieverbruik te verminderen.
3) Conform verordening 1059/2010.
LINK NAAR DE EU-EPREL-DATABANK
De QR-code op het energielabel dat bij het
apparaat wordt geleverd, biedt een weblink naar de
registratie van dit apparaat in de EU-EPREL-
database. Bewaar het energielabel ter referentie
samen met de gebruikershandleiding en alle andere
documenten die bij dit apparaat worden geleverd.
Het is ook mogelijk om informatie gerelateerd aan
de prestaties van het product in de EU-EPREL-
databank te vinden via de link https://
eprel.ec.europa.eu en de modelnaam en het
productnummer kunt u vinden op het typeplaatje
van het apparaat. Zie het hoofdstuk
‘Productbeschrijving’.
Kijk voor meer informatie over het energielabel op
www.theenergylabel.eu
MILIEUBESCHERMING
Recycleer de materialen met het symbool . Gooi
de verpakking in een geschikte afvalcontainer om
het te recycleren. Bescherm het milieu en de
volksgezondheid en recycleer op een correcte
manier het afval van elektrische en elektronische
apparaten. Gooi apparaten gemarkeerd met het
symbool niet weg met het huishoudelijk afval.
Breng het product naar het milieustation bij u in de
buurt of neem contact op met de gemeente.
20
VISIT OUR WEBSITE TO:
Get usage advice, brochures, trouble shooter, service and repair information:
www.zanussi.com/support
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible for any
injuries or damage that are the result of incorrect installation or
usage. Always keep the instructions in a safe and accessible
location for future reference.
CHILDREN AND VULNERABLE PEOPLE SAFETY
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons with very
extensive and complex disabilities shall be kept away from the
appliance unless continuously supervised.
Children of less than 3 years of age should be kept away from
the appliance unless continuously supervised.
Do not let children play with the appliance.
Keep detergents away from children.
Keep children and pets away from the appliance when the door
is open.
Children shall not carry out cleaning and user maintenance of
the appliance without supervision.
GENERAL SAFETY
This appliance is intended to be used in household and similar
applications such as:
farm houses; staff kitchen areas in shops, offices and other
working environments;
by clients in hotels, motels, bed & breakfast and other
residential type environments.
21
Do not change the specification of this appliance.
The operating water pressure (minimum and maximum) must be
between 0.5 (0.05) / 8 (0.8) bar (MPa)
Follow the maximum number of 13 place settings.
If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
Put the cutlery in the cutlery basket with the sharp ends
pointing down or put them in the cutlery drawer in a horizontal
position with the sharp edges down.
Do not leave the appliance with the open door unattended to
avoid stepping accidentally onto it.
Before any maintenance operation, deactivate the appliance
and disconnect the mains plug from the socket.
Do not use high pressure water sprays and/or steam to clean
the appliance.
If the appliance has ventilation openings in the base, they must
not be covered e.g. by a carpet.
The appliance is to be connected to the water mains using the
new supplied hose-sets. Old hose sets must not be reused.
SAFETY INSTRUCTIONS
INSTALLATION
WARNING! Only a qualified person
must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with
the appliance.
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Do not install or use the appliance where the
temperature is less than 0 °C.
Install the appliance in a safe and suitable place
that meets installation requirements.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electric
shock.
The appliance must be earthed.
Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
Always use a correctly installed shockproof
socket.
Do not use multi-plug adapters and extension
cables.
Make sure not to cause damage to the mains
plug and to the mains cable. Should the mains
cable need to be replaced, this must be carried
out by our Authorised Service Centre.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
installation.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
This appliance is fitted with a 13 A mains plug. If
it is necessary to change the mains plug fuse,
use only a 13 A ASTA (BS 1362) fuse (UK and
Ireland only).
22
WATER CONNECTION
Do not cause damage to the water hoses.
Before connection to new pipes, pipes not used
for a long time, where repair work has been
carried out or new devices fitted (water meters,
etc.), let the water flow until it is clean and clear.
Ensure that there are no visible water leaks
during and after the first use of the appliance.
If the water inlet hose is damaged, immediately
close the water tap and disconnect the mains
plug from the mains socket. Contact the
Authorised Service Centre to replace the water
inlet hose.
USE
Do not put flammable products or items that are
wet with flammable products in, near or on the
appliance.
Dishwasher detergents are dangerous. Follow
the safety instructions on the detergent
packaging.
Do not drink and play with the water in the
appliance.
Do not remove the dishes from the appliance
until the programme is complete. Some
detergent may remain on the dishes.
Do not store items or apply pressure on the
open door of the appliance.
The appliance can release hot steam if you open
the door while a programme operates.
INTERNAL LIGHTING
WARNING! Risk of injury.
Concerning the lamp(s) inside this product and
spare part lamps sold separately: These lamps
are intended to withstand extreme physical
conditions in household appliances, such as
temperature, vibration, humidity, or are intended
to signal information about the operational
status of the appliance. They are not intended to
be used in other applications and are not
suitable for household room illumination.
To replace the internal lighting, contact the
Authorised Service Centre.
SERVICE
To repair the appliance contact the Authorised
Service Centre. Use original spare parts only.
Please note that self-repair or non-professional
repair can have safety consequences and might
void the guarantee.
The following spare parts will be available for 7
years after the model has been discontinued:
motor, circulation and drain pump, heaters and
heating elements, including heat pumps, piping
and related equipment including hoses, valves,
filters and aquastops, structural and interior
parts related to door assemblies, printed circuit
boards, electronic displays, pressure switches,
thermostats and sensors, software and firmware
including reset software. Please note that some
of these spare parts are only available to
professional repairers, and that not all spare
parts are relevant for all models.
The following spare parts will be available for 10
years after the model has been discontinued:
door hinge and seals, other seals, spray arms,
drain filters, interior racks and plastic peripherals
such as baskets and lids.
DISPOSAL
WARNING! Risk of injury or
suffocation.
Disconnect the appliance from the mains
supply.
Cut off the mains cable and discard it.
Remove the door catch to prevent children and
pets to get closed in the appliance.
23
CONTROL PANEL
2
1
3
45
1
On/off button
2
Display
3
Indicators
4
Delay button
5
Programme buttons
INDICATORS
Indicator Description
XtraDry indicator.
Rinse aid indicator. It is always off while the programme operates.
Salt indicator. It is always off while the programme operates.
PROGRAMMES
The order of the programmes in the table may not reflect their sequence on the control panel.
24
Programme
Degree of soil
Type of load
Programme phases
Consumption values
1)2)
Duration
(min)
Energy
(kWh)
Water
(l)
3)
Normal soil
Crockery and
cutlery
Prewash
Wash 50 °C
Rinses
Dry
237
4)
/
237
5)
0.920
4)
/
0.936
5)
9.9
4)
/
9.9
5)
6)
All
Crockery,
cutlery, pots
and pans
Prewash
Wash from
45 °C to
70 °C
Rinses
Dry
44 - 160 0.6 - 1.5 6 - 12
Heavy soil
Crockery,
cutlery, pots
and pans
Prewash
Wash 70 °C
Rinses
Dry
155 - 171 1.5 - 1.7 14 - 15
7)
Fresh soil
Crockery and
cutlery
Wash 60 °C
or 65 °C
Rinses
30 0.8 10
Normal or
light soil
Delicate
crockery and
glassware
Wash 45 °C
Rinses
Dry
75 - 85 1.0 - 1.1 13 - 14
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quan-
tity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
3) This programme offers the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. This is the standard programme for test institutes. This programme is used to assess
compliance with the Ecodesign Comission Regulation (EU) 2019/2022.
4) In accordance with the 1016/2010 regulation.
5) In accordance with the 2019/2022 regulation.
6) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts
the temperature and the quantity of water, the energy consumption and the programme duration.
7) This programme is suitable for washing a load or a half load with fresh soil. It gives good washing re-
sults in a short time.
INFORMATION FOR TEST INSTITUTES
To receive the necessary information for conducting performance tests (e.g. according to EN60436 ),
send an email to:
In your request, please include the product number code (PNC) found on the rating plate.
For any other questions regarding your dishwasher, please refer to the service book provided with your
appliance.
25
SETTINGS
PROGRAMME SELECTION MODE
In the programme selection mode it is possible to
set a washing programme and to enter the user
mode to change the appliance settings.
To enter the programme selection mode, press on/
off.
The appliance is in programme selection mode
when
programme indicator is on and the
display shows the programme duration.
If the control panel does not indicate that the
appliance is in programme selection mode,
implement the Reset procedure.
RESET FUNCTION
Use Reset to:
Reset the currently running programme.
Stop the countdown of the Delay option.
Bring the appliance back to the programme
selection mode.
To Reset, press and hold
and until
the appliance is in programme selection mode.
USER MODE
User mode allows to change the following settings:
Adjust the level of the water softener according
to the water hardness.
Activate or deactivate the rinse aid empty
notification.
Activate or deactivate AirDry.
Before entering user mode, make sure the
appliance is in programme selection mode:
1. Press and hold
and .
The indicators , and
flash.
As the appliance stores the saved settings, there is
no need to configure it before every cycle.
ADJUSTING THE WATER SOFTENER
Make sure that the appliance is in user mode:
1. Press .
The indicators and are off.
The indicator still flashes.
The display shows the current setting: e.g.
= level 5.
2. Press to change the setting. Each
pressing increases the level number by one.
After reaching level 10, the countdown starts
again from level 1.
3. Press on/off to confirm the setting.
If you use multi-tabs containing salt
and the hardness of your water is
lower than 21°dH, you can set the
lowest water softener level. It
deactivates the salt refill indicator.
If you use standard detergent or multi-
tabs without salt, set the proper water
hardness level to keep the salt refill
indicator active.
THE WATER HARDNESS TABLE
The water softener removes minerals from the water
supply, which would have a negative effect on the
washing results and on the appliance.
The higher the content of these minerals, the harder
your water is. Water hardness is measured in
equivalent scales.
The water softener should be adjusted according to
the hardness of the water in your area. Your local
water authority can advise you on the hardness of
the water in your area. It is important to set the right
level of the water softener to assure good washing
results.
Water hardness
German degrees
(°dH)
French degrees
(°fH)
mmol/l
Clarke de-
grees
Water softener level
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
26
German degrees
(°dH)
French degrees
(°fH)
mmol/l
Clarke de-
grees
Water softener level
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1) Factory setting.
2) Do not use salt at this level.
Regardless of the type of detergent used, set
the proper water hardness level to keep the
salt refill indicator active.
Multi-tabs containing salt are not
effective enough to soften hard water.
Regeneration process
For the correct water softener operation, the resin
of the softener device needs to be regenerated
regularly. This process is automatic and is the part
of the normal dishwasher operation.
When the prescribed quantity of water (see values
in the table) has been used since the previous
regeneration process, a new regeneration process
will be initiated between the final rinse and the
programme end.
Water softener level Amount of water (l)
1 250
2 100
3 62
4 47
5 25
6 17
7 10
8 5
9 3
10 3
In case of the high water softener setting, it may
occur also in the middle of the programme, before
the rinse (twice during a programme). Regeneration
initiation has no impact on the cycle duration,
unless it occurs in the middle of a programme or at
the end of a programme with a short drying phase.
In that cases, the regeneration prolongs the total
duration of a programme by additional 5 minutes.
Subsequently, the rinsing of the water softener that
lasts 5 minutes may begin in the same cycle or at
the beginning of the next programme. This activity
increases the total water consumption of a
programme by additional 4 litres and the total
energy consumption of a programme by additional
2 Wh. The rinsing of the softener ends with a
complete drain.
Each performed softener rinse (possible more than
one in the same cycle) may prolong the programme
duration by another 5 minutes when it occurs at any
point at the beginning or in the middle of a
programme.
All the consumption values mentioned
in this section are determined in
accordance with the currently
applicable standard in laboratory
conditions with water hardness
2.5mmol/L according to the
2019/2022 regulation (water softener:
level 3).
The pressure and the temperature of
water as well as the variations of the
mains supply can change the values.
DEACTIVATING THE RINSE AID EMPTY
NOTIFICATION
Make sure that the appliance is in user mode:
27
1. Press .
The indicators and are off.
The indicator flashes.
The display shows the current setting:
= rinse aid empty notification
activated.
= rinse aid empty notification
deactivated.
2. Press to change the setting.
3. Press on/off to confirm the setting.
When rinse aid chamber is empty, the
rinse aid indicator is on prompting to
refill the rinse aid. If you are using
multi-tabs containing rinse aid and you
are satisfied with the drying result, you
can deactivate the notification.
However, we recommend that you
always use rinse aid for best drying
performance.
If you use standard detergent or multi-
tabs without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
DEACTIVATING AIRDRY
AirDry improves the drying results with less energy
consumption.
While the drying phase operates, the
device opens the appliance door. The
door is then kept ajar.
By default, AirDry is activated with all programmes
excluding (if applicable), but it is possible to
deactivate it.
Make sure the appliance is in user mode.
1. Press
.
The indicators and
are off.
The indicator flashes.
The display shows the current setting:
= AirDry activated.
=AirDry deactivated.
2. Press to change the setting.
3. Press on/off to confirm the setting.
CAUTION! If children have access to
the appliance, it is advised to
deactivate AirDry as opening the door
may pose a danger.
BEFORE FIRST USE
1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container with special salt for
dishwasher.
3. Fill the rinse aid dispenser with special rinse
aid for dishwasher.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
Do not use detergent and do not load the
baskets.
28
ADDING SALT
Before the first use, put one litre of water in the salt container.
CAUTION! Water and salt can come out of the salt container during filling. To prevent
corrosion, start a programme immediately after filling the salt container.
ADDING RINSE AID
2
1
4
3
2
1
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot
rinse phase.
DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in programme
selection mode.
If the salt indicator is on, fill the salt
container.
If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the
type of load and the degree of soil.
ADDING DETERGENT
2
1
If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance
door.
29
ADDING MULTI-TABLETS
2
1
Adjust the water softener to the lowest level.
THE AUTO OFF FUNCTION
This function decreases energy consumption by
deactivating automatically the appliance when it is
not operating.
The function comes into operation:
5 minutes after the completion of the
programme.
After 5 minutes if the programme has not
started.
STARTING A PROGRAMME
1. Keep the appliance door ajar.
2. Press on/off to activate the appliance. Make
sure that the appliance is in programme
selection mode.
3. Press the button related to the programme you
want to start. The related programme indicator
flashes and the display shows the programme
duration.
4. Set the applicable options.
5. Close the appliance door to start the
programme.
XTRADRY OPTION
Activate this option when you want to boost the
drying performance. With the use of this option, the
duration of some programmes, water consumption
and the last rinse temperature can be affected.
The XtraDry option is a permanent option for all
programmes other than and need not to
be selected at every cycle.
ACTIVATING XTRADRY
Make sure the appliance is in programme selection
mode.
To activate XtraDry:
1. Press simultaneously and and hold until
the indicator
is on.
2. Select a programme.
3. Set Delay option.
4. Close the appliance door to start the
programme.
Once the programme starts running,
XtraDry cannot be activated.
DELAY OPTION
1. Set a programme.
2. Press Delay until the display shows the delay
time you want to set (1-24h).
The delay time flashes in the display.
3. Close the appliance door. The countdown
starts to decrease by 1 hour.
When the countdown is complete the programme
starts.
OPENING THE DOOR WHILE THE
APPLIANCE OPERATES
Opening the door while a programme is running
stops the appliance. It may affect the energy
consumption and the programme duration. After
30
closing the door, the appliance continues from the
point of interruption.
If the door is opened during the drying
phase, before AirDry automatically
opens it, the programme ends after 30
seconds.
If the door is closed after it is opened
automatically by AirDry in the drying
phase, the programme ends after 3
minutes.
Do not try to close the appliance door
within 2 minutes after AirDry
automatically opens it, as this may
cause damage to the appliance.
END OF THE PROGRAMME
When the programme is complete, the display
shows: 0:00.
Press on/off or wait 5 minutes for the Auto OFF
function to automatically deactivate the
appliance.
Close the water tap.
If you open the door before the
activation of Auto OFF, the appliance
is automatically deactivated.
HINTS AND TIPS
GENERAL
Follow the hints below to ensure optimal cleaning
and drying results in daily use and to protect the
environment.
Washing dishes in the dishwasher as instructed
in the user manual usually consumes less water
and energy than washing dishes by hand.
Load the dishwasher to its full capacity to save
water and energy. For best cleaning results,
arrange items in the baskets as instructed in the
user manual and do not overload the baskets.
Do not pre-rinse dishes by hand. It increases
the water and energy consumption. When
needed, select a programme with a prewash
phase.
Remove larger residues of food from the dishes
and empty cups and glasses before putting
them inside the appliance.
Soak or slightly scour cookware with firmly
cooked-on or baked-on food before washing it
in the appliance.
Make sure that items in the baskets do not
touch or cover each other. Only then can the
water completely reach and wash the dishes.
You can use dishwasher detergent, rinse aid
and salt separately or you can use the multi-
tablets (e.g. ''All in 1''). Follow the instructions
on the packaging.
Select a programme according to the type of
load and the degree of soil. offers the
most efficient use of water and energy
consumption.
To prevent limescale buildup inside the
appliance:
Refill the salt container whenever
necessary.
Use the recommended dosage of the
detergent and rinse aid.
Make sure that the current level of the water
softener agrees with the hardness of the
water supply.
Follow the instructions in the chapter "Care
and cleaning".
THE WATER SOFTENER
The water softener removes minerals from the water
supply, which would have a detrimental effect on
the washing results and on the appliance.
The higher the content of these minerals, the harder
your water is. Water hardness is measured in
equivalent scales.
The water softener should be adjusted according to
the hardness of the water in your area. Your local
water authority can advise you on the hardness of
the water in your area. It is important to set the right
level of the water softener to assure good washing
results.
USING SALT, RINSE AID AND DETERGENT
Only use salt, rinse aid and detergent for
dishwasher. Other products can cause damage
to the appliance.
In areas with hard and very hard water we
recommend to use plain dishwasher detergent
(powder, gel, tablets containing no additional
agents), rinse aid and salt separately for optimal
cleaning and drying results.
At least once a month run the appliance with the
use of appliance cleaner which is particularly
suitable for this purpose.
31
Detergent tablets do not fully dissolve with short
programmes. To prevent detergent residues on
the tableware, we recommend that you use the
tablets with long programmes.
Always use the correct quantity of detergent.
Insufficient dosage of detergent can result in
poor cleaning results and hard-water filming or
spotting on the items. Using too much detergent
with soft or softened water results in detergent
residues on the dishes. Adjust the amount of
detergent based on the water hardness. Refer
to the instructions on the detergent packaging.
Always use the correct quantity of rinse aid.
Insufficient dosage of rinse aid decreases the
drying results. Using too much rinse aid results
in bluish layers on the items.
Make sure that the water softener level is
correct. If the level is too high, the increased
quantity of salt in the water might result in rust
on cutlery.
WHAT TO DO IF YOU WANT TO STOP USING
MULTI-TABLETS
Before you start to use separately detergent, salt
and rinse aid do the following procedure.
1. Set the highest level of the water softener.
2. Make sure that the salt and rinse aid containers
are full.
3. Start the shortest programme with a rinsing
phase. Do not add detergent and do not load
the baskets.
4. When the programme is completed, adjust the
water softener according to the water hardness
in your area.
5. Adjust the released quantity of rinse aid.
6. Activate the rinse aid empty notification.
LOADING THE BASKETS
Always use the whole space of the baskets.
Only use the appliance to wash items that are
dishwasher-safe.
Do not wash in the appliance items made of
wood, horn, aluminium, pewter and copper as
they could crack, warp, get discoloured or
pitted.
Do not wash in the appliance items that can
absorb water (sponges, household cloths).
Remove remaining food from the items.
Make soft the remaining burned food on the
items.
Put hollow items (cups, glasses and pans) with
the opening down.
Make sure that cutlery and dishes do not bond
together. Mix spoons with other cutlery.
Make sure that glasses do not touch other
glasses.
Put light items in the upper basket. Make sure
that the items do not move.
Make sure that the spray arm can move freely
before you start a programme.
BEFORE STARTING A PROGRAMME
Before you start the selected programme, make
sure that:
The filters are clean and correctly installed.
The cap of the salt container is tight.
The spray arms are not clogged.
There is enough salt and rinse aid (unless you
use multi-tablets).
The arrangement of the items in the baskets is
correct.
The programme is suitable to the type of load
and the degree of soil.
The correct quantity of detergent is used.
UNLOADING THE BASKETS
1. Let the tableware cool down before you
remove it from the appliance. Hot items can be
easily damaged.
2. First remove items from the lower basket, then
from the upper basket.
After the programme is completed,
water can still remain on the inside
surfaces of the appliance.
CARE AND CLEANING
WARNING! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the
main socket.
Dirty filters and clogged spray arms
decrease the washing results. Make a
check regularly and, if necessary, clean
them.
32
CLEANING THE FILTERS
B
A
C
Make sure that there are no residues of food or soil in or around the edge of the sump.
Put back in place the flat filter (C). Make sure that it is correctly positioned under the 2 guides.
Reassemble the filters (A) and (B).
Put back the filter (A) in the flat filter (C). Turn it clockwise until it locks.
An incorrect position of the filters can cause bad washing results and damage to the
appliance
CLEANING THE SPRAY ARMS
Do not remove the spray arms. If the holes in the
spray arms are clogged, remove remaining parts of
soil with a thin pointed object.
EXTERNAL CLEANING
Clean the appliance with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive cleaning
pads or solvents.
INTERNAL CLEANING
Carefully clean the appliance, including the
rubber gasket of the door, with a soft damp
cloth.
If you regularly use short duration programmes,
these can leave deposits of grease and
limescale inside the appliance. To prevent this,
we recommend to run long duration
programmes at least 2 times per month.
To maintain the performance of your appliance
at its best, we recommend to use monthly a
specific cleaning product for dishwashers.
Follow carefully the instructions on the
packaging of the product.
REMOVAL OF FOREIGN OBJECTS
Check the filters and the sump after each use of the
dishwasher. Foreign objects (e.g. pieces of glass,
plastic, bones or toothpicks, etc) decrease the
cleaning performance and can cause damage to
the drain pump.
1. Disassemble the filters system as instructed in
this chapter.
2. Remove any foreign objects by hand.
CAUTION! If unable to remove the
objects, contact an Authorised
Service Centre.
3. Reassemble the filters as instructed in this
chapter.
33
TROUBLESHOOTING
WARNING! Improper repair of the
appliance may pose a danger to the
safety of the user. Any repairs must be
performed by qualified personnel.
The majority of problems that may occur can
be solved without the need to contact an
Authorised Service Centre.
Refer to the below table for information on possible
problems.
With some problems, the display shows an alarm
code.
Problem and alarm code Possible cause and solution
You cannot activate the appli-
ance.
Make sure that the mains plug is connected to the mains sock-
et.
Make sure that there is no damaged fuse in the fuse box.
The programme does not start. Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or wait for the end of
the countdown.
The appliance recharges the resin inside the water softener.
The duration of the procedure is approximately 5 minutes.
The appliance does not fill with
water.
The display shows i10 or i11.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low.
For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clogged.
Make sure that the inlet hose has no kinks or bends.
The appliance does not drain
the water.
The display shows i20.
Make sure that the sink spigot is not clogged.
Make sure that the interior filter system is not clogged.
Make sure that the drain hose has no kinks or bends.
The anti-flood device is on.
The display shows i30.
Close the water tap.
Make sure that the appliance is correctly installed.
Make sure the baskets are loaded as instructed in the user
manual.
Malfunction of the water level
detection sensor.
The display shows i41 - i44.
Make sure that the filters are clean.
Switch the appliance off and on.
Malfunction of the wash pump
or the drain pump.
The display shows i51 - i59 or
i5A - i5F.
Switch the appliance off and on.
The temperature of the water
inside the appliance is too high
or malfunction of the tempera-
ture sensor occurred.
The display shows i61 or i69.
Make sure that the temperature of the inlet water does not ex-
ceed 60°C.
Switch the appliance off and on.
34
Problem and alarm code Possible cause and solution
Technical malfunction of the
appliance.
The display shows iC0 or iC3.
Switch the appliance off and on.
The level of water inside the
appliance is too high.
The display shows iF1.
Switch the appliance off and on.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right height
above the floor. Refer to the installation instructions.
The appliance stops and starts
more times during operation.
It is normal. It provides optimal cleaning results and energy sav-
ings.
The programme lasts too long. If the delayed start option is set, cancel the delay setting or wait
for the end of the countdown.
The displayed programme du-
ration is different than the du-
ration in the consumption val-
ues table.
Refer to the consumption values table in the chapter "Pro-
grammes".
The remaining time in the dis-
play increases and skips nearly
to the end of programme time.
This is not a defect. The appliance is working correctly.
Small leak from the appliance
door.
The appliance is not levelled. Loosen or tighten the adjustable
feet (if applicable).
The appliance door is not centred on the tub. Adjust the rear
foot (if applicable).
The appliance door is difficult
to close.
The appliance is not levelled. Loosen or tighten the adjustable
feet (if applicable).
Parts of the tableware are protruding from the baskets.
The appliance door opens dur-
ing the wash cycle.
The AirDry function is activated. You can deactivate the func-
tion. Refer to "Settings".
Rattling/knocking sounds from
inside the appliance.
The tableware is not properly arranged in the baskets. Refer to
basket loading leaflet.
Make sure that the spray arms can rotate freely.
The appliance trips the circuit-
beaker.
The amperage is insufficient to supply simultaneously all the ap-
pliances in use. Check the socket amperage and the capacity
of the meter or turn off one of the appliances in use.
Internal electrical fault of the appliance. Contact an Authorised
Service Centre.
Refer to "Before first use", "Daily
use", or "Hints and tips" for other
possible causes.
Once you have checked the appliance, deactivate
and activate the appliance. If the problem occurs
again, contact an Authorised Service Centre.
For alarm codes not described in the table, contact
an Authorised Service Centre.
WARNING! We do not recommend
using the appliance until the problem
has been completely fixed. Unplug the
appliance and do not plug it in again
until you are certain that it operates
correctly.
35
THE WASHING AND DRYING RESULTS ARE NOT SATISFACTORY
Problem Possible cause and solution
Poor washing results. Refer to "Daily use", "Hints and tips" and basket loading
leaflet.
Use more intensive washing programmes.
Clean spray arm jets and filter. Refer to "Care and Clean-
ing".
Poor drying results. Tableware has been left for too long inside a closed appli-
ance.
There is no rinse aid or the dosage of rinse aid is not enough.
Set the rinse aid dispenser to a higher level.
Plastic items may need to be towel dried.
For the best drying performance activate the option XtraDry
and set AirDry.
We recommend to always use rinse aid, even in combination
with multi-tablets.
There are whitish streaks or blu-
ish layers on glasses and dishes.
The release quantity of rinse aid is too much. Adjust the rinse
aid level to a lower level.
The quantity of detergent is too much.
There are stains and dry water
drops on glasses and dishes.
The released quantity of rinse aid is not sufficient. Adjust the
rinse aid level to a higher level.
The quality of the rinse aid can be the cause.
The dishes are wet. For the best drying performance activate the option XtraDry
and set AirDry .
The programme does not have a drying phase or has a drying
phase with low temperature.
The rinse aid dispenser is empty.
The quality of the rinse aid can be the cause.
The quality of the multi-tablets can be the cause. Try a differ-
ent brand or activate the rinse aid dispenser and use rinse
aid and multi-tablets together.
The interior of the appliance is
wet.
This is not a defect of the appliance. it is caused by the hu-
midity in the air that condenses on the walls.
Unusual foam during washing. Use the detergent for dishwashers only.
There is a leak in the rinse aid dispenser. Contact an Author-
ised Service Centre.
Traces of rust on cutlery. There is too much salt in the water used for washing. Refer to
"The water softener".
Silver and stainless steel cutlery were placed together. Avoid
to put silver and stainless steel items close together.
There are residues of detergent
in the dispenser at the end of the
programme.
The detergent tablet got stuck in the dispenser and therefore
was not completely washed away by water.
Water cannot wash away the detergent from the dispenser.
Make sure that the spray arm is not blocked or clogged.
Make sure that items in the baskets do not impede the lid of
the detergent dispenser from opening.
Odours inside the appliance. Refer to "Internal cleaning".
36
Problem Possible cause and solution
Limescale deposits on the table-
ware, on the tub and on the in-
side of the door.
The level of salt is low, check the refill indicator.
The cap of the salt container is loose.
Your tap water is hard. Refer to "The water softener".
Even using multi-functional tabs use salt and set regeneration
of the water softener. Refer to "The water softener".
If lime scale deposits still remain, clean the appliance with
appliance cleaners which are particularly suitable for this pur-
pose.
Try different detergent.
Contact the detergent manufacturer.
Dull, discoloured or chipped ta-
bleware.
Make sure that only dishwasher-safe items are washed in the
appliance.
Load and unload the basket carefully. Refer to basket loading
leaflet.
Place delicate items in the upper basket.
Refer to "Before first use", "Daily
use" or "Hints and tips" for other
possible causes.
TECHNICAL INFORMATION
Dimensions Width / height / depth (mm) 600 / 850 / 625
Electrical connection
1) Voltage (V) 220 - 240
Frequency (Hz) 50
Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)
Water supply
Cold water or hot water
2) max 60 °C
Capacity Place settings 13
Power consumption
3) Left-on mode (W) 5.0
Off-mode (W) 0.50
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to
decrease energy consumption.
3) In accordance with the 1059/2010 regulation.
LINK TO THE EU EPREL DATABASE
The QR code on the energy label supplied with the
appliance provides a web link to the registration of
this appliance in the EU EPREL database. Keep
the energy label for reference together with the
user manual and all other documents provided with
this appliance.
It is possible to find information related to the
performance of the product in the EU EPREL
database using the link https://eprel.ec.europa.eu
and the model name and product number that you
can find on the rating plate of the appliance. Refer
to the chapter "Product description".
For more detailed information about the energy
label, visit www.theenergylabel.eu.
37
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the
packaging in relevant containers to recycle it. Help
protect the environment and human health by
recycling waste of electrical and electronic
appliances. Do not dispose of appliances marked
with the symbol with the household waste.
Return the product to your local recycling facility or
contact your municipal office.
38
*
WWW.ZANUSSI.COM/SHOP
156926592-A-342020
1 / 1

Zanussi ZDF26020WA Handleiding

Categorie
Vaatwassers
Type
Handleiding

in andere talen