Armstrong 1800 Series Handleiding

Type
Handleiding
Not included
Nicht enthalten
Non compris
No incluido
Niet meegeleverd
Non inclusi
Connection
Verbindung
Connexion
Conexion
Aansluiting
Connessioni
Model shown on the drawing: 1811 - Die Zeichnung zeigt das Modell 1811 - Schéma: modèle 1811
Modelo mostrado en el dibujo: 1811 - Model op tekening: 1811 - Modello in figura: 1811
INSTALLATION - INSTALLATIONSANWEISUNG - INSTALLATION
INSTALACION - INSTALLATIE - INSTALLAZIONE
START-UP PROCEDURE - INBETRIEBNAHME - PROCEDURE DE DEMARRAGE
PROCEDIMIENTO DE PUESTA EN MARCHA - OPSTARTPROCEDURE - PROCEDURA D'AVVIAMENTO
SHUT-DOWN PROCEDURE - AUSSERBETRIEBNAHME - PROCEDURE D'ARRET
PROCEDIMIENTO DE PARADA - UIT BEDRIJFNAME - PROCEDURA DI FERMATA
Possible connections: screwed, socketweld or flanged - Mögliche Anschlußarten: Muffengewinde, Schweißmuffen, Flansche
Raccordements possibles: taraudé, à souder ou à brides - Conexiones posibles: roscada, SW o bridada
Mogelijke aansluiting: draad, las of flens - Connessioni disponibili: filettate, tasca a saldare o flangiate
For detailed hookups and adapted start-up and shut-down procedures, see Armstrong literature or consult your local Representative.
Für detaillierte Informationen über Installation, Inbetriebnahme und Außerbetriebnahme sehen Sie die Armstrong Datenblätter oder fragen Sie Ihre
Armstrong-Vertretung.
Pour plus de détails à propos des procédures de démarrage et d'arrêt, ainsi que pour l'installation, veuillez vous référer à la littérature Armstrong
ou prendre contact avec votre Représentant local.
Para posibilidades de conexionado y procedimientos de parada y puesta en marcha, ver catálogos Armstrong o consultar con su Representante
local.
Voor gedetailleerde montage en installatie instructies zie het betreffende Armstrong documentatieblad of neem contact op met uw plaatselijke
Vertegenwoordiger.
Per procedure dettagliate di collegamento, d'avviamento e di fermata, vedere la documentazione Armstrong o consultare il Distributore locale.
Armstrong International S.A., Parc Industriel des Hauts-Sarts, 4040 Herstal - Belgium Ph: +32.4.240.90.90 Fax: +32.4.248.13.61
IOM-1007-A 10/2002 www.armstrong.be Printed in Belgium

Documenttranscriptie

INSTALLATION - INSTALLATIONSANWEISUNG - INSTALLATION INSTALACION - INSTALLATIE - INSTALLAZIONE Model shown on the drawing: 1811 - Die Zeichnung zeigt das Modell 1811 - Schéma: modèle 1811 Modelo mostrado en el dibujo: 1811 - Model op tekening: 1811 - Modello in figura: 1811 Possible connections: screwed, socketweld or flanged - Mögliche Anschlußarten: Muffengewinde, Schweißmuffen, Flansche Raccordements possibles: taraudé, à souder ou à brides - Conexiones posibles: roscada, SW o bridada Mogelijke aansluiting: draad, las of flens - Connessioni disponibili: filettate, tasca a saldare o flangiate Connection Not included Verbindung Nicht enthalten Connexion Non compris Conexion No incluido Aansluiting Niet meegeleverd Connessioni Non inclusi START-UP PROCEDURE - INBETRIEBNAHME - PROCEDURE DE DEMARRAGE PROCEDIMIENTO DE PUESTA EN MARCHA - OPSTARTPROCEDURE - PROCEDURA D'AVVIAMENTO For detailed hookups and adapted start-up and shut-down procedures, see Armstrong literature or consult your local Representative. Für detaillierte Informationen über Installation, Inbetriebnahme und Außerbetriebnahme sehen Sie die Armstrong Datenblätter oder fragen Sie Ihre Armstrong-Vertretung. Pour plus de détails à propos des procédures de démarrage et d'arrêt, ainsi que pour l'installation, veuillez vous référer à la littérature Armstrong ou prendre contact avec votre Représentant local. Para posibilidades de conexionado y procedimientos de parada y puesta en marcha, ver catálogos Armstrong o consultar con su Representante local. Voor gedetailleerde montage en installatie instructies zie het betreffende Armstrong documentatieblad of neem contact op met uw plaatselijke Vertegenwoordiger. Per procedure dettagliate di collegamento, d'avviamento e di fermata, vedere la documentazione Armstrong o consultare il Distributore locale. SHUT-DOWN PROCEDURE - AUSSERBETRIEBNAHME - PROCEDURE D'ARRET PROCEDIMIENTO DE PARADA - UIT BEDRIJFNAME - PROCEDURA DI FERMATA Armstrong International S.A., Parc Industriel des Hauts-Sarts, 4040 Herstal - Belgium IOM-1007-A 10/2002 www.armstrong.be Ph: +32.4.240.90.90 Fax: +32.4.248.13.61 Printed in Belgium
  • Page 1 1
  • Page 2 2

Armstrong 1800 Series Handleiding

Type
Handleiding