Haier HWD90-BP14636NFR Handleiding

Merk: Haier

Model: HWD90-BP14636NFR

Categorie: Wasmachines

Type: Handleiding

Deze handleiding is ook geschikt voor

User manual

Washer-dryer

HWD80-BP14636N

HWD90-BP14636N

HWD100-BP14636N

Thank You

Legend

General information and tips

Environmental information

Disposal

Help protect the environment and human health. Put

the packaging in applicable containers to recycle it.

Help to recycle waste of electrical and electronic ap-

pliances. Do not dispose appliances marked with this

symbol with the household waste. Return the product

to your local recycling facility or contact your municipal

Thank you for purchasing a Haier Product.

Please read these instructions carefully before using this appliance. The instructions con-

tain important information which will help you get the best out of the appliance and ensure

safe and proper installation, use and maintenance.

Keep this manual in a convenient place so you can always refer to it for the safe and proper

use of the appliance.

If you sell the appliance, give it away, or leave it behind when you move house, make sure

you also pass this manual so that the new owner can become familiar with the appliance

and safety warnings.

WARNING!

of it. Remove the door catch to prevent children and pets to get closed in the appliance.

The appliance must not be supplied through an external switching device, such as a ti-

mer, or connected to a circuit that is regularly switched on and oﬀ by a utility.

WARNING!

W arning-Important S afety information

Content

1- Safety information ...........................................................................................................................4

2- Productdescription .........................................................................................................................8

3- Control panel .....................................................................................................................................9

4- Programmes ...................................................................................................................................13

5- Consumption ..................................................................................................................................14

6- Daily use ...........................................................................................................................................15

7- Eco-friendly use .............................................................................................................................20

8- Care and cleaning ..........................................................................................................................21

9- Troubleshooting .............................................................................................................................24

10- Installation .....................................................................................................................................28

11- Technical data ..............................................................................................................................32

12- Customer service ........................................................................................................................33

1- Safety information

Before switching on the appliance for the rst time read the follow-

ing safety hints:

WARNING!

Before rst use

▶ Make sure there is no transport damage.

▶ Make sure all transport bolts are removed.

▶ Remove all packaging and keep out of children´s reach.

▶ Handle the appliance always with at least two persons because it

is heavy.

Daily use

▶ This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental ca-

pabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

▶ Keep away children under 3 years of age from the appliance un-

less they are constantly supervised.

▶ Children shall not play with the appliance.

▶ Do not let children or pets come close to the appliance when the

door is open.

▶ Store washing agents out of reach of children.

▶ Pull up zips, x loose threads and take care for small items to pre-

vent laundry from being entangled. If necessary, use an appropri-

ate bag or net.

▶ Do not touch or use the appliance when barefoot or with wet or

damp hands or feet.

▶ Do not cover or encase the appliance during operation or after-

wards to allow any moisture or dampness to evaporate.

▶ Do not place heavy objects or sources of heat or damp on top of

the appliance.

▶ Do not use or store ﬂammable detergent, sprays, dry cleaning

agent or ﬂammable gas in close vicinity to the appliance.

▶ Do not wash any garments treated with solvents in the appliance

without having dried them previously in the air.

1- Safety information

WARNING!

Daily use

▶ Do not remove or insert the plug in the presence of ﬂammable

gas.

▶ Do not hot wash foam rubber or sponge-like materials.

▶ Do not wash any laundry which is polluted with ﬂour.

▶ Do not open detergent drawer during any wash cycle.

▶ Do not touch the door during the washing process, it gets hot.

▶ Do not open the door if the water level is visibly over the porthole.

▶ Do not force the door to open. The door is tted with a self-lock

device and will open shortly after the washing procedure is ended.

▶ Switch o the appliance after each wash programme and before

undertaking any routine maintenance and disconnect the appli-

ance from the electrical supply to save electricity and for safety.

▶ Hold the plug, not the cable, when unplugging the appliance.

▶ Do make sure the room is dry and well ventilated. The ambient

temperature should be between 5 °C and 35 °C.

▶ Do not cover any ventilation openings in the base by a carpet or

similar object.

▶ Keep the area around the appliance free of dust and lint.

▶ Do make sure that there is only laundry inside the appliance and

no pets or children before you use it.

▶ Only dry textiles washed in water.

▶ Do make sure not to load more than nominal load.

▶ Remove all items such as lighters and matches from pockets.

▶ Use fabric softeners or similar products as specied by the

manufacturer´s packaging.

▶ Notice that the last part of the drying cycle occurs without heat

(cool down cycle) to ensure remaining the garments at a temper-

ature which does not damage them.

▶ Do not leave the appliance unattended during run time for some

time. If a long absence is intended, the drying cycle have to be

interrupted by switching o the unit and unplugging the mains.

▶ Do not switch o the appliance except drying cycle is nished,

unless all items are quickly removed and spread out that the heat

can be released.

1- Safety information

WARNING!

Daily use

▶ Do not dry following items in the appliance:

▶ Items which are unwashed.

▶ Items which have been contaminated with inﬂammable sub-

stances such as cooking oil, acetone, alcohol, benzine, petrol,

kerosene, spot removers, turpentine, waxes, wax removers

or other chemicals. The fumes can cause a re or explosion.

These items must always be washed rst by hand in hot wa-

ter with an extra amount of detergent and then be dried in the

open air before drying in the appliance.

▶ Items which contain padding or llings (e.g. pillows, jackets), as

the lling can get out with the risk of igniting in the appliance.

▶ Items which contain a large proportion of rubber, foam rubber

(latex foam) or rubber like materials such as shower caps, wa-

terproof textiles, rubberised articles and items of clothing and

pillows with foam rubber lling.

▶ Switch o the appliance after each drying programme to save

electricity and for safety.

Maintenance / cleaning

▶ Make sure children are supervised if they carry out cleaning and

maintenance.

▶ Disconnect the appliance from the electrical supply before un-

dertaking any routine maintenance.

▶ Keep the lower part of the porthole clean and open door and de-

tergent drawer if appliance is not in use to prevent odours.

▶ Do not use water spray or steam to clean the appliance.

▶ Replace a damaged supply cord only by the manufacturer, its ser-

vice agent or similarly qualied persons in order to avoid a hazard.

▶ Do not try to repair the appliance by yourself. In case of repair

please contact our customer service.

1- Safety information

Installation

▶ Ensure a location which allows opening the door fully. Do not in-

stall the appliance behind a lockable door, a sliding door or a door

with hinges on the opposite side of the appliance door as this lim-

its the full opening of the appliance door.

▶ The appliance should be placed in a well-ventilated place. Ensure

a location which allows opening the door fully.

▶ Never install the appliance outdoors in a damp place, or in an area

which may be prone to water leaks such as under or near a sink

unit. In the event of a water leak cut power supply and allow the

machine to dry naturally.

▶ Install or use the appliance only where the temperature is above 5 °C.

▶ Do not place the appliance directly on a carpet, or close to a wall

or furniture.

▶ Do not expose the appliance to any frost, heat or direct sunlight

or in the near of heat sources(e.g. stoves, heaters).

▶ Make sure that the electrical information on the rating plate

agrees with the power supply. If it does not, contact an electri-

cian.

▶ Do not use multi-plug adapters and extension cables.

▶ Make sure only the delivered electric cable and hose set are used.

▶ Make sure not to damage the electric cable and the plug. If dam-

aged have it replaced by an electrician.

▶ Use a separate earthed socket for the power supply which is easy

accessible after installation. The appliance must be earthed.

Only for UK: The appliance’s power cable is tted with 3-cord

(grounding) plug that ts a standard 3-cord (grounded) socket.

Never cut o or dismount the third pin (grounding). After the ap-

pliance is installed, the plug should be accessible.

▶ Make sure the hose joints and connections are rm and there is

no leakage.

Intended use

This appliance is intended for washing and drying machine-washable

laundry only. Anytime follow the instructions given on the label of

each garment label. It is designed exclusively for domestic use inside

the house. It is not intended for commercial or industrial use.

Changes or modications to the device are not allowed. Unintended

use may cause hazards and loss of of all warranty and liability claims.

2- Product description

2.1 Picture of appliance

Front (Fig. 2-1): Rear side (Fig. 2-2):

2.2 Accessories

Check the accessories and literature in accordance with this list (Fig.2-3):

Inlet hose-

assembly

5 Blanking

plugs

Drain hose

bracket

User

manual

Warranty

card

Noise

pads

Note:

Temp

Speed Intense

Delay

Start/Pause

Extra rinse

HW80-BP14636

BLDC motor

+++

Auto weightCapacityEnergy

8kg

Self Clean

Temp

Speed Intense

Delay

Start/Pause

Extra rinse

+++

Energy Capacity

7kg

rpm

1400

HW70-BP14636

1000

Temp

Speed Intense

Delay

Start/Pause

5+5kg

Dry

capacity

Spin speedEnergy

1400 8/5kg

HWD80-B14636

Speed up

2-1

2-2

1 Detergent /Softener drawer

2 Display

3 Worktop

4 Programme selector

5 Rating plate

6 Service ﬂap

7 Adjustable feet

1 Transportation bolts (T1-T4)

2 Back cover

3 Back cover screws (S1-S6)

4 Power cord

5 Water inlet valve

6 Drain hose

2-3

3- Control panel

1 “

2 Programme selector

3 Display

4 Detergent /Softener drawer

5 Function buttons

6 “Delay” button

7 “Start/Pause“ button

Note : Acoustic signal

In following cases an acoustic signal sounds:

▶ when pressing a button

▶ when turning the programme selector

▶ at the end of programme

▶ in case of failures

Press this button (Fig. 3-1) gently to switch on, the dis-

play is shining, the indicator of the “Start/Pause” button

is ﬂashing. Press it again for about 2 seconds to switch

ter a while machine will shut down automatically.

3-1

Temp

Speed Steam

Delay

Start/Pause

6+6kg

Speed up

5 6 7

3-0

The acoustic signal can be deselected if necessary:

1. Switch on the appliance.

2. Select the SPIN programme.

3. Press the “Delay “button and “6+6 kg” button at the same time for about 3 seconds.

“

bEEP OFF” will be displayed and the buzzer will be deactivated.

For activating the buzzer press these two buttons at the same time again. “

bEEP ON

” will

be displayed.

Dry

Cotton

Synthetic

Mix

Baby Care

Eco 40-60

Cotton 20°C

Hygiene

Underwear

Wool

Delicate

Wash and Dry

Spin

Fast

Express 15 min

Self clean

rpm

Capacity

9/6kg1400

HWD90-BP14636N

“5+5kg” for HWD80-BP14636N.

3- Control panel

3.5-Function buttons

The function buttons (Fig. 3-5) enables additional op-

tions in the selected programme before programme

start. The related indicators are displayed.

gramme, all options are disabled.

If a button has multiple options, the desired option can

be selected by pressing the button sequentially.

To delete the setting or to cancel the setting process,

press the function button until the desired LED lights

Temp

Speed Steam

Delay

Start/Pause

6+6kg

3.5.1 3.5.2 3.5.3 3.5.4 3.5.5

3-5

3.4-Detergent drawer

Open the drawer (Fig. 3-4), three compart

can be seen:

Compartment 1 : Water inlet only, no detergent

Compartment 2 : Detergent for programme

Compartment

: Softener, Conditioning agent etc.

The recommendation on the type of detergents is

suitable for the various washing temperatures, please

refer to the manual of detergent.

3-4

Note: Factory settings

there is no special requirement default settings are recommended.

3.2-Programme selector

By turning the knob (Fig. 3-2) one of 16 programmes

can be selected, related LED will light up, its default

settings will be displayed.

3-2

3.3- Display

The display (Fig. 3-3) shows following information:

▶ Washing time

▶ Drying time

▶ End time delay

▶ Error codes and service information

3-3

Dry

Cotton

Synthetic

Mix

Baby Care

Eco 40-60

Cotton 20°C

Hygiene

Underwear

Wool

Delicate

Wash and Dry

Spin

Fast

Express 15 min

Self clean

ompartments

3- Control panel

3.5.4-Function button“6+6 kg“

6+6kg

3-5.4

Note: 6+6 kg

Do not overload. Combination of washing and drying cycle only allows a maximum loading

of 6 kg (5kg for HWD80-BP14636N).

3.5.1-Function button ” Temp.“

Press this button (Fig. 3-5.1) to change the washing

temperature of the programme.

In conjunction with the “Steam” button, the child lock

3.5.2-Function button “Speed”

Press this button (Fig. 3-5.2) to change or deselect

the spin of the programme. If no value is illuminated

the laundry will not spun.

Temp

Schleudern Intensiv Zeitvorwahl

5+5 kg

Kurz

Temp

Speed

Intensiv

5+5 kg

3-5.1 3-5.2

3.5.3-Function button “Steam“

Temp

Speed Steam

Zeitvorwahl Start/Pause

5+5 kg

Kurz

3-5.3

Press this button (Fig. 3-5.3) to activate the steam fu-

nction. When this function is activated the default tem-

perature is the maximum temperature of the progra-

mme selected. This function can be activated only with

the following programmes: Cotton, Synthetic, Mix, Baby

Care, Hygiene.When the function is activated the led

above the button will light up. Pushing again this button

the function can be deactivated and the led above the

button will turn oﬀ. When the function is activated the

temperature of the programme cannot be changed.

If “Temp.” is activated, “Steam” function cannot be sel-

ected. Users can only activate “Steam” function before

starting programmes. You cannot activate “Steam”

function while the appliance is already executing a prog-

ramme.

If not selected, the default normal temperature state.

Press this button (Fig. 3-5.4) in order to activate /de-

activate the drying function. This allows washing and

drying of maximum 6 kg laundry without interruption.

By pressing the button sequentially, drying time can be

set( 30, 60, or 150 minutes for Model HWD100 ;

Drying function is not applicable to all programmes

(see PROGRAMMES).

90,120

30,60, 90 or 120 minutes for Model HWD80 and HWD90). If

the display shows or

no value, the drying function is de-

activated. In combination with programme DRY this fu-

nction sets the drying time.

3- Control panel

3.8 Child lock

Press button “ Temp.“ and ”Steam“ for 3 seconds si-

multaneously (Fig. 3-8.1) to block all panel elements

against activation. For unlocking please press again

the two buttons.

The display shows cLo

I- (Fig. 3-8.2) if a button will be

pressed, when the child lock is activated. The change

is not running.

Temp

Speed Steam

Zeitvorwahl Start/Pause

5+5 kg

Speed up

3-8.1

3-8.2

3.7- “Start/Pause“ button

Press this button (Fig. 3-7) gently to start or inter-

rupt the currently displayed programme. During pro-

gramme setting and during programme run the LED

above the button is shining, or if interrupted blinking.

Start/Pause

3-7

3.6- “Delay” button

Speed Intense

Delay

Start/Pause

5+5 kg

Speed up

3-6

Note: Liquid detergent

If using liquid detergent, it is not recommended to activate the end time delay.

3.5.5-Function “Speed up“

This function saves time and energy. It is preferable if

clothes is slightly wetted.

Press simultaneously button

“6+6 kg“ and ”Delay” (Fig. 3-5.5) for about 3 seconds

to activate the “Speed up” function;

SPEEd

uP is dis-

played. This function is not available in all programmes

(see PROGRAMMES).

Delay

6+6kg

3-5.5

Touch

amme

rgorp eht trats ot)6-3 .giF(nottub siht

with a delay. End time delay could be increased in steps

6:30 means end of programme

(

End time will longer th-

programme time).

cycle will be in 6 hours

and 30

min

utes.

Touch “Start/Pause” button to activate

delay.the time

an original

4- Programmes

Relating to dry laundry.

*: water will not heated (no value is iluminated).

Choose 90 °C wash temperature only for special hygienic requirements.

Reduce detergent amount because programme duration is short.

Drying time must be set with function button “6+6 kg”.

Max. load Temperature Preset

spin

speed

in rpm

Function

washing

in kg

drying

in kg

in °C

Preset

Steam

6+6kg

Speed up

Programme

seletable

range 2 1

type

Cotton

10/9/8

* to 90 40

•

Cotton 1400

• • •

Synthetic

5/4.5/4

* to 60 40

•

Synthetic or mixed

fabric

1200

• • •

Mix

10/9/8

* to 60 30

•

Lightly soiled mixed-

laundry of cotton

and synthetic

1000

• • •

Wool

2.5/2/2

/ * to 40 *

•

Machine-washable

fabric made of wool

or with wool content

800

/ / /

Underwear

5/4.5/4

* to 60 40

•

Underwear 1000

• •

Cotton 20°C

* to 20 20

•

1400

•

Eco 40-60

/ / /

•

Hygienic

5/4.5/4 3/3/2.5 90 90

•

Cotton 1000

• • •

Fast

5/4.5/4 * to 40 40

•

Lightly soiled laundry

made of cotton or

synthetic

1000

•

Express

15 min

2.5/2/2 1.0 * to 40 *

•

Cotton / Synthetic 1000

•

Baby Care

5/4.5/4 3/3/2.5 * to 90 40

•

Cotton/Synthetic 1000

• • •

Delicate

2.5/2/2 / * to 30 30

•

Delicate laundry

and silk

800

/ / /

Self clean

/ 90 90

•

Cleaning of the drum

with special detergent

800

/ / /

Dry

/ / / / / /

Cotton, synthetic,

underwear, jeans

/ /

•

Spin

6/6/5

/ / / / /

1000

•

Yes,

Optional,

Detergent compartment for:

Water inlet only,

no detergent

Detergent

Softener or care product

HWD100/

HWD90/

HWD80

10/9/8

Wash and Dry

•

/ /

Cotton, synthetic,

underwear, jeans

Cotton

/ /

10/9/8

6/6/5

4/4/3

6/6/5

3/3/2.5

HWD100/

HWD90/

HWD80

•

Fabric

Non-fragile fabric

5- Consumption

Note: Auto Weight

The appliance is equipped with a loading recognition. At low loading, energy, water and

washing time will be reduced automatically in some programs.

Scan QR code on energy label for energy consumption information.

The actual energy consumption may diﬀer from the declared one according to local

conditions.

Enter the European standard test procedure:

1 :Select Eco 40-60, then press the start button.

2 :Select Wash and Dry, then press the start button.

6- Daily use

6.1 Power supply

Connect the washing machine to a power supply

(220V to 240V~/50Hz; Fig. 6-1). Please refer also to

section INSTALLATION.

6.2. Water connection

▶ Before connecting check the cleanliness and clar-

ity of the water inlet.

▶ Tun on the tap (Fig.6-2).

6-2 6-1

6.3 Preparing laundry

▶ Sort out clothes according to fabric (cotton, syn-

thetics, wool, silk etc.) and how dirty they are (Fig.

6-3). Pay attention to the care labelling of wash-

ing labels.

▶ Separate white clothes from coloured ones.

they fade or run.

▶ Empty pockets (keys, coins, etc.) and remove

6-3

Note: Tightness

Before use check for leakage in the joints between the tap and the inlet hose by turning

on the tap.

harder decorative objects (e.g. brooches) as well as ﬂammable objects (paper tis-

sues, lighters, matches etc.).

▶

put into a wash bag to care for this delicate laundry (hand or dry cleaning would be better).

▶ Close zippers, velcro fastener and hooks, make sure the buttons are sewn on tightly.

▶

and small i-

tems such as socks, belts, bras, etc. in a wash bag.

▶ Unfold large pieces of fabric such as bed sheets, bedspreads etc.

▶ Turn jeans and printed, decorated or color-intensive textiles inside out; possibly

wash separately.

Note: Special hints for drying

▶ Sort clothes according to fabric(cotton, synthetics, etc.) desired dry level and equal

residual moisture. Follow the instructions on the laundry label and dry only machine-

dryable garments

▶ Spin the laundry with the maximum spin speed before drying.

▶ Do not exceed the max. load of 6 kg(5kg for HWD80-BP14636N).

▶

up the laundry and dry again with programme DRY.

▶ Especially delicate fabrics which can easily shrink or lose their shape, as well as e.g. silk

stockings, lingerie etc. should not be dried with the appliance. Put delicate garments

inside a laundry bag and avoid overdrying them.

▶ Jersey and knitwear should not be dried to avoid shrinkage.

6- Daily use

CAUTION!

Non-textile, as well as small, loose or sharp-edged items may cause malfunctions and

damage of clothes and appliance.

Care chart

Washing

Washable up to 95 °C

normal process

Washable up to 60 °C

normal process

Washable up to 60 °C

mild process

Washable up to 40 °C

normal process

Washable up to 40 °C

mild process

Washable up to 40 °C

very mild process

Washable up to 30 °C

normal process

Washable up to 30 °C

mild process

Washable up to 30 °C

very mild process

Wash by hand

max. 40 °C

Do not wash

Bleaching

Any bleaching allowed Only oxygen/

non-chlorine

Do not bleach

Drying

Tumble drying possible

normal temperature

Tumble drying possible

lower temperature

Do not tumble dry

Line drying Flat drying

Ironing

Iron at a maximum

temperature

up to 200 °C

Iron at a medial tem-

perature

up to 150 °C

Iron at a low temper-

ature up to 110 °C;

without steam (steam

ironing may cause irre-

versible damage)

Do not iron

Professional Textile Care

Dry cleaning in tetra-

chloroethene

Dry cleaning in hy-

drocarbons

Do not dry clean

Professional wet clean Do not professional

wet clean

6.4 Loading the appliance

▶ Put in the laundry piece by piece.

▶ Don‘t overload. Note the dierent maximum load according to programmes! Rule of

thumb for maximum load: Check if you can put a hand upright on top of load.

▶ Close the door carefully. Make sure that no pieces of laundry are pinched.

6- Daily use

6.5 Selecting detergent

▶

▶ Use only machine wash approved detergent.

▶

▶ Mind always detergent manufacturer recommendations.

▶ Do not use dry cleaning agents such as trichloroethylene and similar products.

L = gel-/liquid detergent P = powder detergent O = optional

= no

If using liquid detergent, it is not recommended to activate the time delay.

We recomment by using:

▶ Laundry powder: 20 °C to 90 °C* (best use: 40-60 °C)

▶ Color detergent: 20 °C to 60 °C (best use: 30-60 °C)

▶ Wool/delicate detergent: 20 °C to 30 °C (= best use: 20-30 ¡ã°C)

Choose the best detergent

Programme

Kind of detergent

Universal Colour Delicate Special Softener

Cotton

L/P L/P - - o

Synthetic - L/P - - o

Mix

L L/P - - o

Baby Care - - L/P L/P o

Hygiene

L/P L/P - - o

Underwear

- - L/P L/P o

Cotton 20°C L/P L/P - - o

Eco 40-60

L/P L/P - - o

Fast L/P L - - o

Express 15 min

L L - - o

Delicate - - L/P L/P o

Wool - - L/P L/P o

Self clean

- - - L -

Wash and Dry

* Choose 90 °C wash temperature only for special hygienic requirements.

Dry

Spin

- - - - -

L/P - - - o

- - - - -

synthetic and woolen fabric.

6- Daily use

6.7 Switch on the appliance

(Fig. 6-7). The LED of the Start/Pause“ button is ﬂas-

hing.

6-7

6-8

6.6 Adding detergent

1. Slide out the detergent drawer.

2. Put the required chemicals into corresponding

compartments(Fig. 6-6).

3. Push back the drawer gently.

Note:

▶ Remove detergent residues before next wash cycle from the detergent drawer.

▶ Do not overuse detergent or softener.

▶ Please follow the instruction on the detergent package.

▶

▶ Concentrated liquid detergent should be diluted before adding into compartment 2.

▶ The best use of liquid detergent is by using a dosing ball, which is given with the laun-

dry into the washing machine.

▶ Do not use liquid detergent if end time delay“ is selected.

▶ Carefully choose the programme settings according to the care symbols on all laun-

dry labels and according to the programme table.

6.8 Select a programme

To get the best washing results, select a programme

type.

Turn the programme knob

(Fig. 6-8). to select the right

programme. Related programme LED and the default

settings are displayed.

6.9 Add individual selections

Select required options and settings (Fig. 6-9) ;refer to

CONTROL PANEL.

Temp

Speed Steam

Delay

Start/Pause

6+6kg

6-9

Note: Odour removal

amount of detergent in washing agent compartment (2) or special machine cleaner to

remove possibly corruptive residues.

6-6

“

6- Daily use

6.11 Interrupt - cancel wash programme

To interrupt a running programme press gently “Start/Pause“. The LED above the button

is ﬂashing. Press it again to resume operation.

To cancel a running programme and all its individual settings

Note: Standby mode / energy-saving mode

The switched on appliance will go into standby mode if Pause-button is pressed. This

Pause“ button.

6.10 Start wash programme

Press “Start/Pause“ button (Fig. 6-10) to start. Appli-

ance operates according to present settings. Changes

are only possible by cancelling the programme.

Start/Pause

6-10

Note: Door lock

▶ For safety reasons the door is locked partially during the washing /drying cycle. It is

only possible to open the door at the end of the programme or after the programme

was cancelled correctly (see description above).

▶ In case of high water level, high water temperature and during spinning it is not pos-

sible to open the door; Loc1-

is displayed.

6.12 After washing

1. At programme cycle end EnD is displayed.

3. Remove laundry as soon as possible to go easy on it and to prevent more wrinkling.

5. Unplug the power cord.

6. Open the door to prevent formation of moisture and odours. Let it open while not used.

Note: Cool down cycle for drying cycle

The last part of the drying cycle occurs without heat to ensure remaining the garments

at a temperature which does not damage them.

1. Press “Start/Pause” button to interrupt the running programme.

After closing the programme to restart the appliance, select a new programme and s-

Press “On/Oﬀ” button to turn on the appliance, select programme Spin and then se-

lect "no Speed"(speed lights are oﬀ) , start the machine to drain the water.

tart it.

7-Eco-friendly use

Environmentally responsible use

Washing

▶ To achieve best use of energy, water, detergent and time you should use the recom-

mended maximum load size.

▶ Do not overload (hand width clearance above laundry).

▶ For slightly soiled laundry select the Quick Wash programme.

▶ Apply exact dosages of each washing agent.

▶ Choose the lowest adequate washing temperature - modern detergents are efficie-

▶ Raise default settings only due to heavy staining.

▶ Spin the laundry with the maximum spin speed if you want to use a drying program-

me afterwards.

Drying

▶

▶ Loosen up the laundry before starting the drying programme.

▶ Do not use softener when washing, because the laundry will become ﬂ

the dryer programme.

5/6/6

ntly cleaning below 60

°C.

8- Care and cleaning

8.1 Cleaning the detergent drawer

Take always care there are no detergent residues.

Clean the drawer regularly (Fig. 8-1):

1. Pull out the drawer until it stops.

2. Press the release button and remove the drawer.

3. Flush the drawer with water until it is clean and

insert the drawer back in the appliance.

8.2 Cleaning the machine

▶ Unplug the machine during cleaning and mainte-

nance.

▶ Use a soft cloth with soap liquid to clean the ma-

chine case (Fig. 8-2) and rubber components.

▶ Do not use organic chemicals or corrosive sol-

vents.

8.3 Water inlet valve and inlet valve lter

To prevent blockage of water supply by solid substanc-

es like lime clean regularly the inlet valve lter.

▶ Unplug the power cord and turn o the water

supply.

▶ Unscrew the water inlet hose at the back (Fig. 8-3.1)

of the appliance as well as on the tap.

▶ Flush the flters with water and a brush

▶ Insert the lter and install the inlet hose.

8.4 Cleaning the drum

▶ Remove accidentally washed metal parts such as

pins, coins, etc. from the drum (Fig. 8-4) because

they cause rust stains and damage.

▶ Use a non-chloride cleaner for removing rust

stains. Observe the warning hints of the cleaning

agent manufacturer.

▶ Do not use any hard objects or steel wool for clean-

ing.

8-4

8-2

8-1

Note: Self clean

For regular maintenance we recommend to run programme Self clean with no load in

order to remove possible corruptive residues quarterly. Add a small amount of deter-

gent in washing agent compartment (2) - or use a special machine cleaner

8-3.2

8-3.1

(Fig. 8-3.2).

8- Care and cleaning

8.5 Long periods of disuse

If the appliance is left idle for a longer period:

1. Pull out the electrical plug (Fig. 8-5.1).

2. Turn o water supply (Fig. 8-5.2).

3. Open the door to prevent formation of moisture

and odours. Let door open while not used.

Before next usage check carefully power cord, water

inlet and drain hose. Make sure everything is properly

installed and without leackage.

8-5.1 8-5.2

WARNING!

Scalding Risk! Water in the pump lter can be very

hot! Before any action please ensure water has

cooled down.

8.6 Pump lter

Clean the lter once a month and check the pump lter

for instance if the appliance:

▶ doesn´t drain the water.

▶ doesn´t spin.

▶ cause unusual noise while running.

8-6.1 8-6.2

8-6.3 8-6.4

8-6.5 8-6.6

1. Turn o and unplug the machine (Fig. 8-6.1).

2. Open service ﬂap. You can either use a coin or a

screwdriver (Fig. 8-6.2).

3. Provide a ﬂat container to catch leach water

(Fig. 8-6.3). There could be bigger amounts!

4. Pull the drainhose out and hold its end above the

container (Fig. 8-6.3).

5. Take the sealing plug out of the drainhose (Fig.

8-6.3).

6. After complete drainage close drainhose (Fig.

8-6.4). and push it back into the machine.

7. Unscrew and remove counter clockwise the pump

lter (Fig. 8-6.5).

8. Remove contaminants and dirts(Fig. 8-6.6).

After long periods of disuse we recommended to run programme Self clean with no

load and small amount of detergent in washing agent compartment (2) or special ma-

chine cleaner to remove possibly corruptive residues.

Note: Self clean

8- Care and cleaning

CAUTION!

▶ Pump lter sealing has to be clean and unhurt. If the lid is not full tightened, water

can escape.

▶ The lter must be in place, or it may lead to leakage.

9. Clean carefully pump lter, e.g. using running water

(Fig. 8-6.7).

10. Rex it thoroughly (Fig. 8-6.8).

11. Close service ﬂap.

8-6.7

8-6.8

9- Troubleshooting

9.2 Troubleshooting with display code

Problem Cause Solution

CLR FLTR

• Drainage error, water is not fully drained

within 6 minutes,

•

• Check drain hose installation.

• Lock-error. • Shut the door properly.

• Water level not reached after 8 minutes.

• Drain hose is self-syphoning..

• Make sure that tap is fully opened and water

pressure is normal.

• Check drain hose installation.

• Water protective level-error.. • Contact the After sales service

of a problem please check all shown possibilities and follow below instructions before you

contact an after sales service. See CUSTOMER SERVICE.

WARNING!

▶ Before maintenance, deactivate the appliance and disconnect the mains plug from

the mains socket.

▶

improper repairs can cause considerable consequential damages.

▶ A damaged power cable should only be replaced by the manufacturer, its service

9.1 Information codes

Following codes are displayed only for information referring to the washing cycle. No

measures must be performed.

Code Message

1:25

The remaining wash cycle time will be 1 hour and 25 minutes.

6 30

The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-

utes.

Auto

Automatic load detection is working.

End

cLo1-

Function child lock is activated.

LocI-

Door is closed because of high water level, high water temperature or spinning cy-

cle.

bEEP OFF

The buzzer is deactivated.

bEEP ON

The buzzer is activated.

SPEEd

Function “Speed up” is activated.

Clean pump filter.

9- Troubleshooting

9.3 Troubleshooting without display code

Problem Cause Solution

Appliance fails to

operate.

• Programme is not yet started.

• Door is not properly closed.

• Machine has not been switched on

• Power failure.

• Child lock is activated.

• Check programme and start it.

• Close the door properly.

• Switch the machine on.

• Check power supply.

• Deactivate child lock.

Appliance will not be

• No water.

• Inlet hose is kinked.

•

• Water pressure is less than 0.03

MPa.

• Door is not properly closed.

• Water supply failure.

• Check water tap.

• Check inlet hose.

•

• Check water pressure.

• Close the door properly.

• Ensure the water supply.

Appliance is draining

• Height of drain hose is below 80

cm.

• Drain hose end could reach into water.

• Make sure that drain hose is

properly installed.

• Make sure the drain hose is not

in water.

Drainage failure

• Drain hose is blocked.

•

• Drain hose end is higher than 100

cm above ﬂoor level.

• Unblock drain hose.

•

• Make sure that drain hose is

properly installed.

Problem Cause Solution

• Temperature sensor-error. • Contact the After sales service.

• Heating-error.