18
Before first use
1. First place the 4 included AAA batteries. Remove the battery
cover underneath the product. Then insert the batteries with
correct polarity direction into the battery slots. The correct
direction is displayed on each battery slot.
2. You are able to set the preferred unit: kg - lb - st:lb by pressing
the unit button located underneath the product. Press the button
until the preferred value is shown on the screen.
3. Place the scale on a hard and at surface for the most accurate
reading. Do not use this scale on carpets because it will give an
inaccurate reading.
Use without the E-care app
You can measure your weight without the E-care app.
1. To use the scale without the app, step on the scale and the
display will turn on automatically.
2. The rotating dots at the edge of the screen will indicate that the
scale is performing a body weight measurement. The current
measurement will be shown in the middle of the screen.
3. Keep standing still on the scale until the value starts blinking.
This is the result of your measurement.
4. After your result is displayed on the screen, step off the scale.
The result will be shown for about 10 seconds before the scale
will go into standby mode.
If you want to measure your BMI you need to connect your scale to
the E-care app as described on the next pages.
Use