Ofichairs Match Handleiding

Type
Handleiding

Deze handleiding is ook geschikt voor

ESPAÑOL
Introducción
Muchas gracias por la compra de un producto de OFICHAIRS. Por favor, lea atentamente las
siguientes instrucciones. Las Ilustraciones pueden diferir del diseño real. Para mantener la
información clara no es posible de describir todas las opciones de montaje posibles. En caso que
necesita más informaciones o ayuda, puede contactarnos en:
Tel.: +34 93 700 11 00 / eMail: clientes@ofichairs.com
Nota
Le pedimos de en primer lugar desembalar todas las partes de la entrega y de comprobar si
existen algunos daños de transporte. Partes dañadas o faltantes pueden afectar la funcionalidad
de la silla. En este caso, por favor, póngase en contacto con nosotros antes de seguir con el
montaje. Para posibilitar un montaje fácil, le recomendamos de inicialmente apretar los tornillos
solo parcialmente. Después de haber insertado todos los tornillos en la rosca respectiva, se
pueden apretar totalmente.
Tapas protectoras de resortes de gas
Retire la tapa protectora (si está presente) del resorte de gas antes del montaje. Esto puede ser
fácilmente retirado con dos dedos.
ENGLISH
Introduction
Thank you for purchasing a OFICHAIRS product. Please read the following instructions carefully.
Illustrations may slightly differ from the actual execution. For reasons of clarity, not all conceivable
assembly variants can be described. If you need more information and help, please contact us:
Tel.: +34 93 700 11 00 / eMail: clientes@ofichairs.com
Note
First unpack all parts of the delivery and check them for possible transport damage. Damaged or
missing parts can affect the safety and function of the chair. In this case please contact us first
before proceeding with the installation. In order to ensure an easy construction, we recommend at
first to tighten all screws only partially. Only after all screws have been inserted into their respective
thread, should they be tightened.
Gas lift cap
Remove the protective cap (if present) from the trigger pin of the gas spring before installation.
This can easily be removed with two fingers.
ITALIANO
Introduzione
Grazie per aver scelto uno dei prodotti OFICHAIRS. Si prega di leggere attentamente le seguenti
istruzioni. Le rappresentazioni possono differire dall‘effettiva esecuzione. Per ragioni di chiarezza,
non tutte le varianti di montaggio concepibili possono essere descritte. Se hai bisogno di maggiori
informazioni o d‘aiuto, ti preghiamo di contattarci:
Tel.: +34 93 700 11 00 / eMail: clientes@ofichairs.com
Istruzioni
Per prima cosa scartare tutte le parti della consegna e controllare che non vi siano danni dovuti al
trasporto. Le parti danneggiate o mancanti potrebbero influire sulla sicurezza e sul funzionamento
della sedia. In questo caso, si prega di contattarci prima di procedere all‘installazione. Al fine di
garantire una costruzione semplice, si consiglia di serrare in un primo momento tutte le viti solo
leggermente. Solo dopo aver inserito tutte le viti nelle rispettive filettature, sarà necessario serrarle
con più forza.
Involucro di protezione della molla a gas
Rimuovere il cappuccio protettivo (se presente) dal perno del grilletto della molla a gas prima
dell‘installazione. L‘involucro può essere facilmente sfilato con due dita.
FRANCAIS
Introduction
Merci d’avoir choisi un produit OFICHAIRS. Veuillez lire attentivement les instructions suivantes. Les
représentations peuvent différer de l‘exécution réelle. Pour des raisons de clarté, toutes les
variantes d‘assemblage imaginables ne peuvent pas être décrites. Si vous avez besoin de plus
d‘informations et d‘aide, veuillez nous contacter:
Tel.: +34 93 700 11 00 / eMail: clientes@ofichairs.com
Indications
Déballez d’abord toutes les pièces de la livraison et vérifiez-les pour d’éventuels dégâts. Les pièces
endommagées ou manquantes peuvent affecter la sécurité et le fonctionnement du fauteuil. Dans
ce cas, veuillez nous contacter avant de procéder à l‘installation. Afin d‘assurer une construction
facile, nous recommandons de serrer toutes les vis légèrement au début. Serrez-les bien après
que toutes les vis aient été insérées dans le filetage correspondant.
Bouchon de vérin à gaz
Retirez le capuchon de protection (le cas échéant) de la goupille de déclenchement du ressort à
gaz avant l‘installation. Ceci peut être facilement enlevé avec deux doigts
NEDERLANDS
Inleiding
Bedankt voor uw aankoop van uw OFICHAIRS bureaustoel of bureaumeubel. Leest u svp de
volgende instructies graag aandachtig door. Het is mogelijk dat de afbeeldingen wat afwijken van
het eigenlijke ontwerp. Omwille van de duidelijkheid kunnen niet alle mogelijke montagevarianten
worden beschreven. Als u meer informatie en hulp nodig heeft, neemt u dan contact met ons op,
op het volgende telefoonnummer: Tel.: +34 93 700 11 00 / eMail: clientes@ofichairs.com
Instructies
Wij raden u aan om eerst alle onderdelen van de levering uit te pakken en te controleren op
eventuele transportschade. Beschadigde of ontbrekende onderdelen kunnen de veiligheid en de
werking van de bureaustoel namelijk in gevaar brengen. Neemt u in dit geval eerst contact met ons
op voordat u verder gaat met de montage. Om een eenvoudige montage te garanderen, raden wij
u aan om alle schroeven in het begin slechts licht aan te draaien. Pas nadat alle schroeven in de
respectievelijke schroefdraad zijn geplaatst, kunt u deze vaster aandraaien.
Gasveerbeschermkap
U dient de beschermkap van de gasveer te verwijderen (indien aanwezig) voordat u met de
installatie begint. Deze kan gemakkelijk met twee vingers worden losgetrokken.
DEUTSCH
Einleitung
Vielen Dank, dass Sie sich für ein Produkt von OFICHAIRS entschieden haben. Bitte lesen Sie die
folgende Anleitung aufmerksam durch. Darstellungen können von der tatsächlichen Ausführung
abweichen. Aus Gründen der Übersicht können nicht alle denkbaren Montagevarianten
beschrieben werden. Wenn Sie weitere Informationen und Hilfe benötigen, kontaktieren Sie uns
bitte: Tel.: +34 93 700 11 00 / eMail: clientes@ofichairs.com
Hinweis
Packen Sie zunächst alle Teile der Lieferung aus und überprüfen Sie diese auf eventuelle
Transportschäden. Beschädigte oder fehlende Teile können die Sicherheit und die Funktion des
Stuhls beeinträchtigen. In diesem Fall kontaktieren Sie uns bitte zuerst, bevor Sie mit der Montage
fortfahren. Um einen leichten Aufbau zu gewährleisten, empfehlen wir, alle Schrauben zunächst
nur leicht anzuziehen. Erst nachdem alle Schrauben in das jeweilige Gewinde eingeführt wurden,
sollten diese fest angezogen werden.
Gasfeder-Schutzkappe
Entfernen Sie vor dem Einbau die Schutzkappe (falls vorhanden) vom Auslösepin der Gasfeder.
Diese lässt sich leicht mit zwei Fingern abziehen.
ES
EN
IT
DE
FR
NL
Como ajustar su nueva silla
de oficina correctamente
How to adjust your new
office chair correctly
Come montare correttamente
la tua nuova sedia da ufficio
So stellen Sie Ihren neuen
Bürostuhl richtig ein
Comment régler correctement
votre nouvelle chaise de bureau
Hoe kunt u uw nieuwe
bureaustoel goed afstellen
Flex silla
Flex silla
AB
CD
E F
1 x1 7 x5
8 x2
9 x4
10 x6
11 x3
2 x1
4 x1
5 x1
6 x1
3 x1(L)x1(R)
12 x1
13 x1
  • Page 1 1
  • Page 2 2

Ofichairs Match Handleiding

Type
Handleiding
Deze handleiding is ook geschikt voor