Pioneer BCS-707, BCS-303, S-BD303 de handleiding

  • Hallo! Ik ben een AI-chatbot die speciaal is getraind om je te helpen met de Pioneer BCS-707 de handleiding. Ik heb het document al doorgenomen en kan je duidelijke en eenvoudige antwoorden geven.
ENGLISH
FRANÇAIS
DEUTSCH ITALIANO ESPAÑOL
NEDERLANDS
P/NO: MFL65220804
BCS-707
XV-BD707
S-BD707T
S-BD707SW
BCS-303
XV-BD707
S-BD303
HB985-DB.BDEUPPK_ENG.indd 1HB985-DB.BDEUPPK_ENG.indd 1 2010-05-14  1:41:212010-05-14  1:41:21
2 Safety Information
Safety Information
1
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning  ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
su cient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
Cautions and Warnings
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
con ned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturers
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product is a class 1 laser product
classi ed under the Safety of laser products,
IEC60825-1:2007. To ensure proper use of this
product, please read this owner’s manual carefully
and retain it for future reference. Shall the unit
require maintenance, contact an authorized service
centre.
Use of controls, adjustments or the performance of
procedures other than those speci ed herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
1
Safety Information
HB985-DB.BDEUPPK_ENG.indd 2HB985-DB.BDEUPPK_ENG.indd 2 2010-05-14  1:41:402010-05-14  1:41:40
Safety Information
3Safety Information
1
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the speci cation page of this
owners manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or  re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the cord
exits the appliance. To disconnect power from the
mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
PIONEER hereby declares that this/
these product(s) is/are in compliance
with the essential requirements and
other relevant provisions of Directive
2004/108/EC, 2006/95/EC, and
2009/125/EC.
WARNING: To prevent a  re hazard, do not place any
naked  ame sources (such as a lighted candle) on
the equipment.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat
to human and animal health, the old battery or
the battery put it in the appropriate container at
designated collection points. Do not dispose of
batteries or battery together with other waste.
It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine,  re or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects  lled
with liquids, such as vases, shall be placed on the
apparatus.
HB985-DB.BDEUPPK_ENG.indd 3HB985-DB.BDEUPPK_ENG.indd 3 2010-05-14  1:41:412010-05-14  1:41:41
4 Safety Information
Safety Information
1
Information for users on collection and disposal
of old equipment and used batteries
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical
and electronic products and batteries should not be
mixed with general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points in accordance with your
national legislation.
By disposing of these products and batteries
correctly, you will help to save valuable resources
and prevent any potential negative e ects on human
health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling
of old products and batteries, please contact your
local municipality, your waste disposal service or the
point of sale where you purchased the items.
These symbols are only valid in the European
Union.
For countries outside the European Union:
If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct
method of disposal.
Notes on Copyrights
Because AACS (Advanced Access Content System)
is approved as content protection system for BD
format, similar to use of CSS (Content Scramble
System) for DVD format, certain restrictions are
imposed on playback, analogue signal output,
etc., of AACS protected contents. The operation of
this product and restrictions on this product may
vary depending on your time of purchase as those
restrictions may be adopted and/or changed by
AACS after the production of this product.
Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark,
BD+, or this product, please contact an authorized
Customer Service Centre.
Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programmes, videotapes, BD-ROM discs, DVDs,
CDs and other materials may subject you to civil
and/or criminal liability.
Symbol examples
for batteries
Pb
HB985-DB.BDEUPPK_ENG.indd 4HB985-DB.BDEUPPK_ENG.indd 4 2010-05-14  1:41:412010-05-14  1:41:41
Safety Information
5Safety Information
1
Important Notice for TV colour system
The colour system of this player di ers according to
currently playing discs.
For example, when the player plays the disc recorded
in the NTSC colour system, the image is output as an
NTSC signal.
Only the multi system colour TV can receive all
signals output from the player.
If you have a PAL colour system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
The multi system colour TV changes the colour
system automatically according to input signals.
In case that the colour system is not changed
automatically, turn it o and then on to see
normal images on screen.
Even if the disc recorded in NTSC colour system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
HB985-DB.BDEUPPK_ENG.indd 5HB985-DB.BDEUPPK_ENG.indd 5 2010-05-14  1:41:412010-05-14  1:41:41
6
Contents
1
Safety Information
2 Cautions and Warnings
2
Preparation
8 Introduction
8 About the Symbol
Display
8 Symbols Used in this Manual
9 Supplied Accessories
10 Playable Discs
11 File compatibility
12 Regional Code
12 AVCHD (Advanced Video
Codec High De nition)
12 Certain System Requirements
12 Compatibility Notes
13 Remote control
14 Front panel
15 Rear panel
3
Installation
16 Assemble the speakers
16 Speaker Setup for BCS-707
18 Speaker Setup for BCS-303
19 Wall mounting the centre speaker
19 Additional notes on speaker
20 Positioning the system
21 Connecting to Your TV
21 HDMI Connection
22 Component Video
Connection
23 Video Connection
23 Resolution Setting
24 Antenna connection
24 Connections with external device
24 AUX Connection
25 PORTABLE IN connection
25 OPTICAL IN 1/2 connection
26 Bluetooth® connection
28 Connecting to your Home Network
29 Network Setup
31 USB device connection
32 Settings
32 Adjust the Setup Settings
33 [DISPLAY] Menu
34 [LANGUAGE] Menu
35 [AUDIO] Menu
36 [LOCK] Menu
37 [NETWORK] Menu
37 [OTHERS] Menu
39 Sound E ect
HB985-DB.BDEUPPK_ENG.indd 6HB985-DB.BDEUPPK_ENG.indd 6 2010-05-14  1:41:412010-05-14  1:41:41
7
1
2
3
4
5
6
7
8
4
Operation
40 General Playback
42 Advanced Playback
44 On-Screen display
48 Enjoying BD-LIVE
49 Playing movie  le and VR discs
51 Viewing a photo
53 Listening to music
56 Playing the iPod
58 Radio Operations
59 Playing content via your home
network
5
Maintenance
63 Notes on Discs
63 Handling the Unit
6
Troubleshooting
64 General
65 Picture
65 Sound
66 Network
7
Appendix
67 Controlling a TV with the Supplied
Remote Control
68 Area Code List
69 Language code List
70 Video output resolution
71 Trademarks and Licences
73 Speci cations
75 Open source software notice
HB985-DB.BDEUPPK_ENG.indd 7HB985-DB.BDEUPPK_ENG.indd 7 2010-05-14  1:41:412010-05-14  1:41:41
8 Preparation
Preparation
2
2
Preparation
Introduction
About the Symbol Display
may appear on your TV display during
operation and indicates that the function
explained in this owners manual is not
available on that speci c media.
Symbols Used in this Manual
NOTE
Indicates special notes and operating features.
CAUTION
Indicate cautions for preventing possible
damages from abuse.
A section whose title has one of the following
symbols are applicable only to the disc
represented by the symbol.
BD
BD-ROM disc
DVD
DVD-Video, DVD±R/RW in
Video mode or VR mode
and  nalized
AVCHD
DVD±R/RW in AVCHD
format
ACD
Audio CDs
MOVIE
Movie  les
MUSIC
Music  les
PHOTO
Photo  les
HB985-DB.BDEUPPK_ENG.indd 8HB985-DB.BDEUPPK_ENG.indd 8 2010-05-14  1:41:412010-05-14  1:41:41
9Preparation
2
Preparation
Supplied Accessories
Video cable (1) Remote control (1)
Battery (1) FM antenna (1)
iPod cradle (1)
Accessaries of speaker box
(S-BD707T)
Colour-coded
Speaker cables (5)
Screws (12)
Speaker stand bases
(4)
Small non-skid pads
(1)
Middle non-skid
pads (1)
Accessaries of speaker box
(S-BD707SW)
Speaker cable (1) Large non-skid pads
(1)
Accessaries of speaker box
(S-BD303)
Colour-coded
Speaker cables (6)
Small non-skid pads
(1)
Large non-skid pads
(1)
HB985-DB.BDEUPPK_ENG.indd 9HB985-DB.BDEUPPK_ENG.indd 9 2010-05-14  1:41:412010-05-14  1:41:41
10 Preparation
Preparation
2
Playable Discs
Blu-ray Disc
- Discs such as movies that can
be p
urchased or rented.
- BD-R/RE discs that contain
Movie, Music or Photo  les.
DVD-VIDEO
8 / 12 cm disc
Discs such as movies that can be
purchased or rented.
DVD±R
8 / 12 cm disc
- Video mode and  nalized only
- Supports the dual layer disc
also
- Finalized AVCHD format
- DVD±R discs that contain
Movie, Music or Photo  les
DVD-RW
8 / 12 cm disc
- VR mode, Video mode and
nalized only
- Finalized AVCHD format
- DVD-RW discs that contain
Movie, Music or Photo  les.
DVD+RW
8 / 12 cm disc
- Video mode and  nalized only
- AVCHD format
- Finalized AVCHD format
- DVD+RW discs that contain
Movie, Music or Photo  les.
Audio CD
8 / 12 cm disc
CD-R/RW
8 / 12 cm disc
- CD-R/RW discs that contain
audio titles, Movie, Music or
Photo  les.
NOTE
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW)
disc itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
Depending on the recording software & the
nalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a DVD or
CD Recorder may not play if the disc is damaged
or dirty, or if there is dirt or condensation on the
player’s lens.
If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software
publisher for more detailed information.)
This player requires discs and recordings to meet
certain technical standards in order to achieve
optimal playback quality.
Pre-recorded DVDs are automatically set to
these standards. There are many di erent
types of recordable disc formats (including
CD-R containing MP3 or WMA  les) and these
require certain pre-existing conditions to ensure
compatible playback.
Customers should note that permission is
required in order to download MP3 / WMA  les
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
HB985-DB.BDEUPPK_ENG.indd 10HB985-DB.BDEUPPK_ENG.indd 10 2010-05-14  1:41:422010-05-14  1:41:42
11Preparation
2
Preparation
File compatibility
Overall
Available File extensions:
.jpg”, “.jpeg”, “.png”, “.avi”, “.divx, “.mpg”, “.mpeg”,
.mkv, “.mp4”, “.mp3”, “.wma, “.wav
Available  le extensions di er depending
on the DLNA servers.
Some .wav les are not supported on this
player.
The  le name is limited to 180 characters.
Depending on the size and number of the
les, it may take several minutes to read the
contents on the media.
Maximum Files/Folder: Less than 2 000 (total
number of  les and folders)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
MOVIE
Available resolution size:
1 920 x 1 080 (W x H) pixels
Playable subtitle: SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha (.ssa/.txt), MicroDVD
(.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
VobSub (.sub) is not available in the
[Home Link] feature.
Playable Codec format: “DIVX3.xx, “DIVX4.
xx, “DIVX5.xx, “XVID”, “DIVX6.xx (Standard
playback only), H.264/MPEG-4 AVC, MPEG1 SS,
MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”, “DTS”,
“MP3”, “WMA, “AAC, “AC3”
Not all the WMA and AAC Audio formats are
compatible with this unit.
Sampling frequency:
between 32 kHz to 48 kHz (WMA),
between 16 kHz to 48 kHz (MP3)
Bit rate:
between 20 kbps to 320 kbps (WMA),
between 32 kbps to 320 kbps (MP3)
NOTE
HD movie  les contained on the CD or USB
1.0/1.1 may not played properly. BD, DVD or USB
2.0 are recommended to play back HD movie
les.
This player supports H.264/MPEG-4 AVC pro le
Main, High at Level 4.1. For a  le with higher
level, the warning message will appear on the
screen.
This player does not support the  les that are
recorded with GMC
*
1
or Qpel
*
2
. Those are video
encoding techniques in MPEG4 standard, like
DivX or XVID have.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
MUSIC
Sampling frequency:
between 8 kHz to 48 KHz (WMA),
between 11 kHz to 48 kHz (MP3)
Bit rate:
between 8 kbps to 320 kbps (WMA, MP3),
NOTE
This unit cannot support the ID3 Tag embedded
MP3  le.
The total playback time indicated on the screen
may not be correct for VBR  les.
PHOTO
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
Less than 4 MByte/ le
Progressive and lossless compression photo
image  les are not supported.
HB985-DB.BDEUPPK_ENG.indd 11HB985-DB.BDEUPPK_ENG.indd 11 2010-05-14  1:41:422010-05-14  1:41:42
12 Preparation
Preparation
2
Regional Code
This unit has a regional code printed on the
rear of the unit. This unit can play only BD-ROM
or DVD discs labeled same as the rear of the
unit or ALL.
AVCHD (Advanced Video Codec
High De nition)
This player can playback AVCHD format
discs. These discs are normally recorded and
used in camcorders.
The AVCHD format is a high de nition
digital video camera format.
The MPEG-4 AVC/H.264 format is capable
of compressing images at higher e ciency
than that of the conventional image
compressing format.
Some AVCHD discs use the x.v.Colour
format.
This player can playback AVCHD discs using
“x.v.Colour format.
Some AVCHD format discs may not play,
depending on the recording condition.
AVCHD format discs need to be  nalized.
• “x.v.Colour o ers a wider colour range than
normal DVD camcorder discs.
Certain System Requirements
For high de nition video playback:
High de nition display that has
COMPONENT or HDMI input jacks.
BD-ROM disc with high de nition content.
HDMI or HDCP capable DVI input on your
display device is required for some content
(as speci ed by disc authors).
For up-conversion of standard de nition
DVD, a HDMI or HDCP capable DVI input
on your display device is required for copy
protected content.
Compatibility Notes
Because BD-ROM is a new format,
certain disc, digital connection and other
compatibility issues are possible. If you
experience compatibility problems, please
contact an authorized Customer Service
Centre.
Viewing high-de nition content and up-
converting standard DVD content may
require a HDMI-capable input or HDCP-
capable DVI input on your display device.
Some BD-ROM and DVD discs may restrict
the use of some operation commands or
features.
You can use a USB device that is used
to store some disc related information,
including downloaded on-line content. The
disc you are using will control how long this
information is retained.
HB985-DB.BDEUPPK_ENG.indd 12HB985-DB.BDEUPPK_ENG.indd 12 2010-05-14  1:41:422010-05-14  1:41:42
13Preparation
2
Preparation
Remote control
1
2
3
• • • • • • • • •
a
• • • • • • • • •
1
(STANDBY/ON): Switches the
player ON or OFF.
Z
OPEN/CLOSE: Opens and closes
the disc tray.
INPUT/TUNER: Changes input
mode.
BT AUDIO: Changes input mode to
BT AUDIO directly.
OPTICAL: Changes input mode to
optical directly.
DISPLAY: Displays or exits On-
Screen Display.
HOME MENU: Displays or exits
the [Home Menu].
MENU: Accesses the menu on a
disc.
Direction buttons: Selects an
option in the menu.
ENTER: Acknowledges menu
selection.
TUNE (+/-): Tunes in the desired
radio station.
PRESET: Selects programme of
Radio.
• • • • • • • • •
b
• • • • • • • • •
O
RETURN: Exits the menu or
resumes playback.
POPUP/ TOP MENU: Displays the
DVD title menu or BD-ROM’s pop-
up menu, if available.
x
STOP: Stops playback.
B
PLAY: Starts playback.
X
PAUSE/STEP: Pauses playback
.
/
>
SKIP: Goes to the next
or previous chapter / track /  le.
m
/
M
SCAN: Searches
backward or forward.
SPK LEVEL: Sets the sound level of
desired speaker.
z
USB REC: Records an audio CD.
MUTE: Mute the unit.
SOUND: Selects a sound e ect
mode.
VOL +/- : Adjusts speaker volume.
• • • • • • • • •
c
• • • • • • • • •
0-9 numerical buttons: Selects
numbered options in a menu.
MARKER: Marks any point during
playback.
SEARCH: Displays or exits the
search menu.
REPEAT: Repeats a desired
section or sequence.
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
DIMMER: Dims the light on the
unit.
ZOOM: Accesses the zoom menu.
Coloured (A, B, C, D) buttons: Use
to navigate on menus.
- A button (RDS): Radio Data
System.
- B button (PTY): Views the
programme type of the RDS.
- C button (PTY SEARCH):
Searches programme type.
- D button: Selects MONO or
STEREO in FM mode.
TV Control Buttons: See page 67.
SLEEP: Sets a certain period of time
after which the unit will switch to
o .
Battery Installation
Remove the battery cover
on the rear of the Remote
Control, and insert a R03 (size
AAA) battery with and
matched correctly.
HB985-DB.BDEUPPK_ENG.indd 13HB985-DB.BDEUPPK_ENG.indd 13 2010-05-14  1:41:422010-05-14  1:41:42
14 Preparation
Preparation
2
Front panel
a
Disc Tray
b
Operation buttons
1
STANDBY/ON Button
Z
(OPEN/CLOSE)
FUNCTION
Changes the input source or function
B
/
X
(PLAY / PAUSE)
x
(STOP)
.
/
>
(SKIP)
- TUNE + (Radio tuning)
c
Remote sensor
d
Display window
e
PORTABLE IN
f
USB Port
g
Volume control
1
2
3 4 5 6 7
HB985-DB.BDEUPPK_ENG.indd 14HB985-DB.BDEUPPK_ENG.indd 14 2010-05-14  1:41:432010-05-14  1:41:43
15Preparation
2
Preparation
a
AC Power cord
Plug into the power source.
b
Speakers connectors
c
Cooling Fan
d
Antenna Connector
e
VIDEO OUT
f
AUX (L/R) INPUT
g
COMPONENT VIDEO (Y P
B
P
R
)
OUTPUT (PROGRESSIVE SCAN)
h
OPTICAL IN 1(TV) / 2
i
iPod (24 pin)
Connect to the furnished iPod cradle.
j
HDMI OUT (type A, Version 1.3)
Connect to TV with HDMI inputs.
k
LAN port
Rear panel
1 2 3 4 5
6 7 8 9 10 11
HB985-DB.BDEUPPK_ENG.indd 15HB985-DB.BDEUPPK_ENG.indd 15 2010-05-14  1:41:432010-05-14  1:41:43
16 Installation
Installation
3
Assemble the
speakers
Speaker Setup for BCS-707
Preparing the speakers
1. Attach the non-skid pads to the base of
each speaker stand bases, the subwoofer
and the centre speaker.
For speaker stand bases:
Use the supplied adhesive to attach four
middle pads to the base (bottom) of each
speaker stand base.
middle non-skid pads
For subwoofer:
Use the supplied adhesive to attach four
large pads to the base of subwoofer.
large non-skid pads
For centre speaker:
Use the supplied adhesive to attach four
small pads to the base of centre speaker.
small non-skid pads
2. Attach the speaker stand bases to the stems
using the screws provided.
Once you have aligned the stem and base,
secure with the small screws at the points
shown below. Note that the speaker should
face in the direction of the base of the
isosceles triangle.
Rear
Front
3
Installation
HB985-DB.BDEUPPK_ENG.indd 16HB985-DB.BDEUPPK_ENG.indd 16 2010-05-14  1:41:432010-05-14  1:41:43
17Installation
3
Installation
3. Connect the wires to the player.
Connect the white wire with gray line into
(+) side and the other wire into (–) side. To
connect the cable to the player, press each
plastic  nger pad to open the connection
terminal. Insert the wire and release the
nger pad.
CAUTION
Do not connect any speakers other than those
supplied to this system.
Do not connect the supplied speakers to any
ampli er other than the one supplied with this
system. Connection to any other ampli er may
result in malfunction or  re.
Securing your front and surround
speakers
Secure each of the front and surround speakers
using the plastic catch provided. Screw two
supporting hooks into the wall behind the
speaker. Pass a thick cord around the hooks
and through the plastic catch so that the
speaker is stabilized (make sure to test that
it supports the weight of the speaker). After
installing, make sure the speaker is securely
xed.
thick cord
Plastic catch
CAUTION
The plastic catch is not a mounting  xture, and
the speaker should not be hung directly from
the wall using this catch. Always use a cord
when stabilizing the speaker.
Pioneer disclaims all responsibility for any
losses or damage resulting from improper
assembly, installation, insu cient strength of the
installation materials, misuse, or natural disasters.
When placing this unit, ensure that it is  rmly
secured and avoid areas where it may be likely
to fall and cause injury in the event of a natural
disaster (such as an earthquake).
Coloured (+)
HB985-DB.BDEUPPK_ENG.indd 17HB985-DB.BDEUPPK_ENG.indd 17 2010-05-14  1:41:442010-05-14  1:41:44
18 Installation
Installation
3
Speaker Setup for BCS-303
Preparing the speakers
1. Attach the non-skid pads to the base of
each speaker.
For speaker stand bases:
Use the supplied adhesive to attach four
middle pads to the base (bottom) of each
speaker stand base.
small non-skid pads
For subwoofer:
Use the supplied adhesive to attach four
large pads to the base of subwoofer.
large non-skid pads
For centre speaker:
Use the supplied adhesive to attach four
small pads to the base of centre speaker.
small non-skid pads
2. Connect the wires to the player.
Connect the white wire with gray line into
(+) side and the other wire into (–) side. To
connect the cable to the player, press each
plastic  nger pad to open the connection
terminal. Insert the wire and release the
nger pad.
Coloured (+)
HB985-DB.BDEUPPK_ENG.indd 18HB985-DB.BDEUPPK_ENG.indd 18 2010-05-14  1:41:442010-05-14  1:41:44
19Installation
3
Installation
Wall mounting the
centre speaker
The centre speaker have a mounting hole
which can be used to mount the speaker on
the wall.
Before mounting
Remember that the speaker system is heavy
and that its weight could cause the screws
to work loose, or the wall material to fail to
support it, resulting in the speaker falling. Make
sure that the wall you intend to mount the
speakers on is strong enough to support them.
Do not mount on plywood or soft surface
walls.
Mounting screws are not supplied. Use screws
suitable for the wall material and support the
weight of the speaker.
CAUTION
If you are unsure of the qualities and strength of
the wall, consult a professional for advice.
Pioneer is not responsible for any accidents or
damage that result from improper installation.
5 mm
10 mm
5 mm to 7 mm
Mounting screw
(not supplied)
Additional notes on
speaker
Install the main front left and right speakers at
an equal distance from the TV.
Precautions:
Make sure that all the bare speaker wire is
twisted together and inserted fully into the
speaker terminal. If any of the bare speaker
wire touches the back panel it may cause the
power to cut o as a safety measure.
The front, centre and surround speakers
supplied with this system are magnetically
shielded. However, depending on the
installation location, colour distortion may
occur if the speaker is installed extremely
close to the screen of a television set. If this
case happens, turn the power switch of the
television set OFF, and turn it ON after 15 min.
to 30 min. If the problem persists, place the
speaker system away from the television set.
The subwoofer is not magnetically shielded
and so should not be placed near a TV or
monitor. Magnetic storage media (such as
oppy discs and tape or video cassettes)
should also not be kept close to the subwoofer.
Do not attach the front/surround speakers and
subwoofer to a wall or ceiling. They may fall o
and cause injury.
HB985-DB.BDEUPPK_ENG.indd 19HB985-DB.BDEUPPK_ENG.indd 19 2010-05-14  1:41:442010-05-14  1:41:44
20 Installation
Installation
3
Positioning the system
The following illustration shows an example
of positioning the system. Note that the
illustrations in these instructions di er from the
actual unit for explanation purposes.
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (
A
).
A
B
D
E
F
A
A
A
A
A
G
C
A
Front left speaker (L)/
B
Front right speaker (R):
Place the front speakers to the sides of the
monitor or screen and as  ush with the screen
surface as possible.
C
Centre speaker:
Place the centre speaker above or below the
monitor or screen.
D
Surround left speaker (L)/
E
Surround right speaker (R):
Place these speakers behind your listening
position, facing slightly inwards.
F
Subwoofer:
The position of the subwoofer is not so
critical, because low bass sounds are not
highly directional. But it is better to place
the subwoofer near the front speakers. Turn
it slightly toward the centre of the room to
reduce the wall re ections.
G
Unit
CAUTION
Be careful to make sure children do not put their
hands or any objects into the *subwoofer duct.
*subwoofer duct: A hole for plentiful bass sound
on subwoofer cabinet (enclosure).
Place the centre speaker at a safe distance from
the child’s reach.
Otherwise it may result in the speaker falling
down and causing personal injury and/or
property damage.
The speakers contain magnet parts, so colour
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers away
from the TV screen or PC monitor screen.
HB985-DB.BDEUPPK_ENG.indd 20HB985-DB.BDEUPPK_ENG.indd 20 2010-05-14  1:41:452010-05-14  1:41:45
21Installation
3
Installation
Connecting to Your TV
Make one of the following connections,
depending on the capabilities of your existing
equipment.
HDMI connection (pages 21-22)
Component Video connection (page 22)
Video connection (page 23)
NOTE
Depending on your TV and other equipment
you wish to connect, there are various ways you
could connect the player. Use only one of the
connections described in this manual.
Please refer to the manuals of your TV, stereo
system or other devices as necessary to make
the best connections.
Make sure the player is connected directly to
the TV. Tune the TV to the correct video input
channel.
Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
HDMI Connection
If you have a HDMI TV or monitor, you
can connect it to this player using a HDMI
cable(Type A, Version 1.3). Connect the HDMI
OUT jack on the player to the HDMI IN jack on
a HDMI compatible TV or monitor.
HDMI Connection
Player
TV
TV
Player
Set the TVs source to HDMI (refer to TVs
Owners manual).
HB985-DB.BDEUPPK_ENG.indd 21HB985-DB.BDEUPPK_ENG.indd 21 2010-05-14  1:41:452010-05-14  1:41:45
22 Installation
Installation
3
NOTE
Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn o the
player and then turn it on again.
When the HDMI connection with HDCP is not
veri ed, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
If there is noise or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5 m and use a high speed HDMI
cable (version 1.3).
If a connected HDMI device does not accept the
audio output of the
player, the HDMI
device’s audio sound may be distorted or may
not output.
When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 23.)
Select the type of video output from the HDMI
OUT jack using [HDMI Color Setting] option on
the [Setup] menu (see page 34).
When you connect a HDMI or DVI compatible
device make sure of the following:
- Try switching o the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this player.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720x576p (480p), 1280x720p, 1920x1080i or
1920x1080p video input.
Not all HDCP-compatible HDMI or DVI devices
will work with this player.
- The picture will not be displayed properly with
non-HDCP device.
- This player does not playback and TV screen is
changed to black screen.
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on
the player to the corresponding input jacks on
the TV using Y Pb Pr cables. You can hear the
sound the through the systems speaker.
Component Connection
Player
TV
Green
Blue
Red
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Player
Green
Blue
Red
TV
NOTE
When you use COMPONENT VIDEO OUT
connection, you can change the resolution for the
output. (Refer to “Resolution setting” on page 23.)
HB985-DB.BDEUPPK_ENG.indd 22HB985-DB.BDEUPPK_ENG.indd 22 2010-05-14  1:41:462010-05-14  1:41:46
23Installation
3
Installation
Video Connection
Connect the VIDEO OUT jack on the player to
the video in jack on the TV using a video cable.
You can hear the sound through the systems
speakers.
Video Connection
TV
Yellow
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Player
TV
Yellow
Resolution Setting
The player provides several output resolutions
for HDMI OUT and COMPONENT VIDEO OUT
jacks. You can change the resolution using
[Setup] menu.
1. Press HOME MENU (
).
2. Use
I
/
i/U
/
u
to select the [Setup] and
press ENTER (
). The [Setup] menu appears.
3. Use
U
/
u
to select [DISPLAY] option then
press
i
to move to the second level.
4. Use
U
/
u
to select the [Resolution] option
then press ENTER (
) or
i
to move to the
third level.
5. Use
U
/
u
to select the desired resolution
then press ENTER (
) to con rm your
selection.
NOTE
If your TV does not accept the resolution you
have set on the player, you can set resolution to
576p (480p) as follows:
1. Press
Z
to open the disc tray.
2. Press
x
for more than 5 seconds.
Since several factors a ect the resolution of
video output, see Video Output Resolution on
page 70.
HB985-DB.BDEUPPK_ENG.indd 23HB985-DB.BDEUPPK_ENG.indd 23 2010-05-14  1:41:462010-05-14  1:41:46
24 Installation
Installation
3
Antenna connection
Connect the supplied antenna for listening to
the radio.
Antenna Connection
Player
Player
NOTE
After connecting the FM wire antenna, keep it as
horizontal as possible. Be sure to fully extend the
FM wire antenna.
Connections with
external device
AUX Connection
You can enjoy the sound from an external
component through the speakers of this
system.
Connect the analogue audio output jacks of
your component into the AUX L/R (INPUT) on
this unit. And then select the [AUX] option by
pressing INPUT/TUNER,
I
/
i
and ENTER (
).
AUX Connection
Player
To the audio output jacks
of your component
(TV, VCR, etc.)
Red
White
PR
PB
Y
COMPONENT
VIDEO
INPUT
L
AUX
R
VIDEO
Red
White
Player
To the audio output jacks
of your component
(TV, VCR, etc.)
HB985-DB.BDEUPPK_ENG.indd 24HB985-DB.BDEUPPK_ENG.indd 24 2010-05-14  1:41:472010-05-14  1:41:47
25Installation
3
Installation
PORTABLE IN connection
You can enjoy the sound from your portable
audio player through the speakers of this
system.
Connect the headphones (or line out )
jack of the portable audio player into the
PORTABLE IN socket of this unit. And then
select the [PORTABLE] option by pressing
INPUT/TUNER,
I
/
i
and ENTER (
).
PORT.IN Connection
twZGSGUUU
OPTICAL IN 1/2 connection
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
Connect the optical output jack of your
component into the OPTICAL IN 1/2 jacks on
the unit. And then select the [OPTICAL 1/2]
option by pressing INPUT/TUNER,
I
/
i
and
ENTER (
). Or press OPTICAL to select directly.
Optical Connection
To the digital
optical output jack
of your component
To the digital
optical output jack
of your component
HB985-DB.BDEUPPK_ENG.indd 25HB985-DB.BDEUPPK_ENG.indd 25 2010-05-14  1:41:472010-05-14  1:41:47
26 Installation
Installation
3
Bluetooth® connection
About Bluetooth
Bluetooth® is wireless communication
technology for short range connection.
The available range is within 10 meters.
(The sound may be interrupted when the
connection interfered by the other electronic
wave or you connect the bluetooth in the other
rooms.)
Connecting individual devices under
Bluetooth wireless technology does not incur
any charges. A mobile phone with Bluetooth
wireless technology can be operated via
the Cascade if the connection was made via
Bluetooth wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA (This units be supported the Stereo
Headset.)
Bluetooth Pro les
In order to use Bluetooth wireless technology,
devices must be able to interpret certain
pro les.
This unit is compatible with following pro le.
A2DP (Advanced Audio Distribution Pro le)
Listening to music of a Bluetooth
device
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to
your Bluetooth device. Refer to your Bluetooth
device’s user guide. Once a pairing operation is
performed, it does not need to be performed
again.
1. Select the Bluetooth function by using the
INPUT/TUNER or BT AUDIO.
Appears “BT AUDIO” and then “BT READY” in
display window.
2. Operate the Bluetooth device and perform
the pairing operation. When searching for
this unit with the Bluetooth device, a list
of the devices found may appear in the
Bluetooth device display depending on the
type of Bluetooth device. Your unit appears
as “PIONEER AUDIO”.
3. Enter the PIN code.
PIN cord : 0000
4. When this unit successfully paired with your
Bluetooth device, Bluetooth LED of this unit
lights up and appears “BT SINK.
NOTE
Depending on the Bluetooth device type, some
device have a di erent pairing way.
5. Listening to music.
To play a music stored on your Bluetooth
device, refer to your Bluetooth devices user
guide.
NOTE
If you change the function of the unit, the
Bluetooth function is disconnected, operate
pairing again.
AVRCP cannot be available in this mode.
HB985-DB.BDEUPPK_ENG.indd 26HB985-DB.BDEUPPK_ENG.indd 26 2010-05-14  1:41:482010-05-14  1:41:48
27Installation
3
Installation
Checking the information of connected
Bluetooth device
This function is operated after pairing. You can
check the Bluetooth information.
Press DISPLAY repeatedly.
Bluetooth information is changed as follows.
Local Bluetooth Device Address
t
Device
Name
t
None
t
...
NOTE
This units dose not be supported the Mono
Headset Pro le (Hands Free Pro le).
The sound may be interrupted when the
connection interfered by the other electronic
wave.
You cannot control the Bluetooth device with
this unit.
Pairing is limited one Bluetooth device per one
unit and multi-pairing is not supported.
Although the distance between your Bluetooth
and the set is less than 10 m, there are obstacles
between both, your Bluetooth device cannot be
connected.
Depending on the type of the device, you may
not be able to use the Bluetooth function.
When not connected the Bluetooth, “BT READY”
appears on the display window.
The Electrical malfunction due to devices using
same frequency such as Medical equipment,
Microwaves or wireless LAN devices, the
connection will be disconnected.
When someone stands and interrupts
communication between Bluetooth device and
the player, the connection will be disconnected.
If the gotten away of the distance between
Bluetooth and the unit, the sound quality is lower
and lower the connection will disconnect when
the space between the Bluetooth and the unit
gets out of the operating range of Bluetooth.
The device with Bluetooth wireless technology
is disconnected, if you turn o the main unit or
put the device away from the main unit more
than 10 m.
HB985-DB.BDEUPPK_ENG.indd 27HB985-DB.BDEUPPK_ENG.indd 27 2010-05-14  1:41:482010-05-14  1:41:48
28 Installation
Installation
3
Connecting to your
Home Network
This player can be connected to a local area
network (LAN) via the LAN port on the rear
panel.
Please refer to the documentation for your
network device for further instructions.
Connect the players LAN port to the
corresponding port on your Modem or Router
using a commercially available LAN or Ethernet
cable (CAT5 or better with RJ45 connector).
In the example con guration for wired
connection below, this player would be able to
access content from either of the PCs.
Network Connection
Broadband
Service
Router
WAN
LAN 1
LAN 2
LAN 3
Player
PC
PC
Router
Broadband
Service
Player
NOTE
When plugging or unplugging the LAN cable,
hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.
Do not connect a modular phone cable to the
LAN port.
Since there are various connection
con gurations, please follow the speci cations
of your telecommunication carrier or internet
service provider.
If you want to access content from PCs or DLNA
servers, this player must be connected to the
same local area network with them via a router.
HB985-DB.BDEUPPK_ENG.indd 28HB985-DB.BDEUPPK_ENG.indd 28 2010-05-14  1:41:482010-05-14  1:41:48
29Installation
3
Installation
Network Setup
Before setting the wired network, you need to
connect the broadband internet to your home
network.
If there is a DHCP server on the local area
network (LAN) via wired connection, this player
will automatically be allocated an IP address.
After making the physical connection, a small
number of home networks may require the
player’s network setting to be adjusted. Adjust
the [NETWORK] setting as follows.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (
).
2. Use
U
/
u
/
I
/
i
to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
NOTE
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set the [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using
U
/
u
/
I
/
i
and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
3. Select [OK] and press ENTER ( ) to apply
network settings.
4. The player will ask you to test the network
connection. Select [OK] and press ENTER
(
) to complete the network connection.
5. If you select [Test] and press ENTER ( )
at step 4 above, the network connection
status is displayed on the screen.
You can also test it on the [Connection
Status] in the [Setup] menu.
HB985-DB.BDEUPPK_ENG.indd 29HB985-DB.BDEUPPK_ENG.indd 29 2010-05-14  1:41:482010-05-14  1:41:48
30 Installation
Installation
3
Notes on Network Connection:
Many network connection problems during
set up can often be  xed by re-setting the
router or modem. After connecting the
player to the home network, quickly power
o and/or disconnect the power cable of
the home network router or cable modem.
Then power on and/or connect the power
cable again.
Depending on the internet service provider
(ISP), the number of devices that can
receive internet service may be limited by
the applicable terms of service. For details,
contact your ISP.
Our company is not responsible for
any malfunction of the player and/or
the internet connection feature due to
communication errors/malfunctions
associated with your broadband internet
connection, or other connected equipment.
The features of BD-ROM discs made
available through the Internet Connection
feature are not created or provided
by our company, and our company is
not responsible for their functionality
or continued availability. Some disc
related material available by the Internet
Connection may not be compatible with
this player. If you have questions about such
content, please contact the producer of the
disc.
Some internet contents may require a
higher bandwidth connection.
Even if the player is properly connected and
con gured, some internet contents may
not operate properly because of internet
congestion, the quality or bandwidth of
your internet service, or problems at the
provider of the content.
Some internet connection operations may
not be possible due to certain restrictions
set by the Internet service provider (ISP)
supplying your broadband Internet
connection.
Any fees charged by an ISP including,
without limitation, connection charges are
your responsibility.
A 10 Base-T or 100 Base-TX LAN port is
required for wired connection to this player.
If your internet service does not allow for
such a connection, you will not be able to
connect the player.
You must use a Router to use xDSL service.
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the
internet connection feature contained in
this player or you may be limited to the
number of devices you can connect at the
same time. (If your ISP limits subscription
to one device, this player may not be
allowed to connect when a PC is already
connected.)
The use of a “Router may not be allowed
or its usage may be limited depending on
the policies and restrictions of your ISP. For
details, contact your ISP directly.
• Turn o all unused network equipment in
your local home network. Some devices
may generate network tra c.
HB985-DB.BDEUPPK_ENG.indd 30HB985-DB.BDEUPPK_ENG.indd 30 2010-05-14  1:41:482010-05-14  1:41:48
31Installation
3
Installation
USB device
connection
This player can play movie, music and photo
les contained in the USB device.
1. Insert a USB device to the USB port until it
ts into place.
USB Connection
2. Press HOME MENU.
Select [Movie], [Photo] or [Music] using
U
/
u
/
I
/
i
, and press ENTER ( ).
3. Select a  le using
U
/
u
/
I
/
i
, and press PLAY
or ENTER (
) to play the  le.
You can check the space of the USB device
on the screen.
4. Select the other mode. And withdraw the
USB device carefully.
NOTE
This player supports USB  ash memory/external
HDD formatted in FAT16, FAT32 and NTFS when
accessing  les (music, photo, movie). However,
for BD-LIVE and Audio CD recording, only FAT16
and FAT32 formats are supported. Use the USB
ash memory/external HDD formatted in either
FAT16 or FAT32 when using BD-LIVE and Audio
CD recording.
The USB device can be used for local storage for
enjoying BD-Live discs from the Internet.
This unit can support up to 4 partitions of the
USB device.
Do not extract the USB device during operation
(play, etc.).
An USB device which requires additional
programme installation when you have
connected it to a computer, is not supported.
USB device: USB device that support USB 1.1
and USB 2.0.
Movie, music and photo  les can be played.
For details of operations on each  le, refer to
relevant pages.
Regular back up is recommended to prevent
data loss.
If you use a USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognised.
Some USB device may not work with this unit.
Digital camera and mobile phone are not
supported.
The USB Port on this unit cannot be connected
to a PC.
HB985-DB.BDEUPPK_ENG.indd 31HB985-DB.BDEUPPK_ENG.indd 31 2010-05-14  1:41:482010-05-14  1:41:48
32 Installation
Installation
3
Settings
Adjust the Setup Settings
You can change the settings of the player in
the [Setup] menu.
1. Press HOME MENU (
).
2. Use
I
/
i/U
/
u
to select [Setup] and press
ENTER ( ). The [Setup] menu appears.
3. Use
U
/
u
to select a  rst setup option, and
press
i
to move to the second level.
4. Use
U
/
u
to select a second setup option,
and press ENTER (
) to move to the third
level.
5. Use
U
/
u
to select a desired setting, and
press
i
or ENTER ( ) to con rm your
selection.
HB985-DB.BDEUPPK_ENG.indd 32HB985-DB.BDEUPPK_ENG.indd 32 2010-05-14  1:41:482010-05-14  1:41:48
33Installation
3
Installation
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to
your TV type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking
bars above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to  ll your TV
screen. Both sides of the picture are cut o .
[16:9 Original]
Select when a 16:9 wide TV is connected.
The 4:3 picture is displayed with an original
4:3 aspect ratio, with black bars appearing
at the left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected.
The 4:3 picture is adjusted horizontally (in a
linear proportion) to  ll the entire screen.
NOTE
You cannot select [4:3 Letter Box] and [4:3 Pan
Scan] option when the resolution is set to higher
than 720p.
Resolution
Sets the output resolution of the Component
and HDMI video signal. Refer to page 23 and
70 or details about the resolution setting.
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
this automatically selects the resolution
best suited to the connected TV. If the
COMPONENT VIDEO OUT only is connected,
this changes the resolution to 1080i as
default resolution.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[576p (480p)]
Outputs 576 (480) lines of progressive video.
[576i (480i)]
Outputs 576 (480) lines of interlaced video.
HB985-DB.BDEUPPK_ENG.indd 33HB985-DB.BDEUPPK_ENG.indd 33 2010-05-14  1:41:492010-05-14  1:41:49
34 Installation
Installation
3
1080p Display Mode
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of  lm material
(1080p/ 24 Hz) with a HDMI-equipped display
compatible with 1080p/ 24 Hz input.
NOTE
When you select [24 Hz], you may experience
some picture disturbance when the video
switches video and  lm material. In this case,
select [50 Hz].
Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/ 24 Hz
, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
HDMI Color Setting
Select the type of output from the HDMI
OUT jack. For this setting, please refer to the
manuals of your display device.
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI (RGB)
display device.
[LANGUAGE] Menu
Display Menu
Select a language for the [Setup] menu and
on-screen display.
Disc Menu/ Disc Audio/
Disc Subtitle
Select the language you prefer for the audio
track (disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Press ENTER (
) to select another language.
Use number buttons then ENTER ( ) to
enter the corresponding 4-digit number
according to the language code list on
page 69.
[O ] (for Disc Subtitle only)
Turn o Subtitle.
NOTE
Depending on the disc, your language setting may
not work.
HB985-DB.BDEUPPK_ENG.indd 34HB985-DB.BDEUPPK_ENG.indd 34 2010-05-14  1:41:492010-05-14  1:41:49
35Installation
3
Installation
[AUDIO] Menu
Speaker Setup
To obtain the best possible sound, use the
speaker setup display to specify the volume
of the speakers you have connected and their
distance from your listening position. Use the
test to adjust the volume of the speakers to the
same level.
[Speaker]
Select a speaker that you want to adjust.
[Volume]
Adjust the output level of each speaker.
[Distance]
Adjust the distance between each speaker
and the listening position.
[Test/ Stop test tone]
The speakers will emit a test tone.
[OK]
Con rms the setting.
[Cancel]
Cancels the setting.
HD AV Sync
Sometimes Digital TV encounters a delay
between picture and sound. If this happens
you can compensate by setting a delay on the
sound so that it e ectively waits’ for the picture
to arrive: this is called HD AV Sync. Use
U u
to
scroll up and down through the delay amount,
which you can set at anything between 0 and
300 ms.
The delay will vary depending on which digital
TV channel you are on. If you change channel
you may need to readjust the HD AV Sync.
DRC (Dynamic Range Control)
When a title encoded in Dolby Digital or Dolby
Digital Plus is playing back, you may wish to
compress the dynamic range of the audio
output (the di erence between the loudest
sounds and the quietest ones). This allows you
to listen to a movie at a lower volume without
losing clarity of sound. Set [DRC] to [On] for
this e ect.
NOTE
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete stop
mode.
HB985-DB.BDEUPPK_ENG.indd 35HB985-DB.BDEUPPK_ENG.indd 35 2010-05-14  1:41:492010-05-14  1:41:49
36 Installation
Installation
3
[LOCK] Menu
To access any features in the [LOCK] settings,
you must enter the 4-digit security code you
have created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password
twice, and press ENTER (
) to create a new
password.
Password
You can create or change the password.
[None]
Enter a 4-digit password twice, and press
ENTER (
) to create a new password.
[Change]
Enter the current password and press ENTER
(
). Enter a 4-digit password twice, and
press ENTER ( ) to create a new password.
NOTE
If you make a mistake before pressing ENTER
( )
,
press CLEAR. Then input the correct password.
If you forget your password,
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player.
2. Select [Lock] option in the [Setup] menu.
3. Use number buttons to enter “210499” on the
[Lock] Menu. The password is cleared.
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select this, parental control is not
active and the disc plays in full.
BD Rating
Sets an age limit for BD-ROM playback.
Use number buttons to input an age limit for
BD-ROM viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with
corresponding ratings recorded on them.
NOTE
The [BD Rating] will be applied only for the BD disc
that containing the Advanced Rating Control.
Area Code
Enter the code of the area whose standards
were used to rate the DVD video disc, based
on the list on page 68.
HB985-DB.BDEUPPK_ENG.indd 36HB985-DB.BDEUPPK_ENG.indd 36 2010-05-14  1:41:492010-05-14  1:41:49
37Installation
3
Installation
[NETWORK] Menu
Connection Setting
If your home network environment is ready to
connect to the player, the player needs to be
set up for network communication.
(See “Connecting to your Home Network on
page 28.)
Connection Status
If you want to check the network status on
this player, select the [Connection Status]
option and press ENTER ( ) to check whether
a connection to the network and the internet
has been established.
BD-LIVE connection
You can restrict Internet access when BD-LIVE
functions are used.
[Permitted]
Internet access is permitted for all BD-LIVE
contents.
[Partially permitted]
Internet access is permitted only for BD-
LIVE contents which have content owner
certi cates. Internet access and AACS
Online functions are prohibited for all BD-
LIVE contents without a certi cate.
[Prohibited]
Internet access is prohibited for all BD-LIVE
contents.
[OTHERS] Menu
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, Inc. This is an o cial
DivX Certi ed device that plays DivX video.
Visit www.divx.com for more information and
software tools to convert your  les into DivX
video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certi ed® device must be registered in order to
play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the
DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete
the registration process and learn more about
DivX VOD.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
NOTE
All the downloaded videos from DivX VOD with
this player’s registration code can only be played
back on this unit.
HB985-DB.BDEUPPK_ENG.indd 37HB985-DB.BDEUPPK_ENG.indd 37 2010-05-14  1:41:492010-05-14  1:41:49
38 Installation
Installation
3
Auto Power O
The screen saver appears when you leave
the player in Stop mode for about  ve
minutes. If you set this option to [On], the unit
automatically turns itself o after the Screen
Saver is displayed for 25 minutes.
Set this option to [O ] to leave the screen
saver until the unit is operated by the user.
Initialize
Factory Set
You can reset the player to its original
factory settings.
BD Storage Clear
Removes the BD contents from the
connected USB storage.
NOTE
If you reset the player to its original factory settings
using [Factory Set] option, you have to set all the
activation for the on-line services and network
settings again.
Software Information
Displays the current software version.
HB985-DB.BDEUPPK_ENG.indd 38HB985-DB.BDEUPPK_ENG.indd 38 2010-05-14  1:41:492010-05-14  1:41:49
39Installation
3
Installation
Sound E ect
You can select a suitable sound mode. Press
SOUND repeatedly until the desired mode
appears on the front panel display or the TV
screen. The displayed items for the equalizer
maybe di erent depending on sound sources
and e ects.
[Pioneer 1]: Gives you suitable sound setting
with connecting small type of speakers
(S-BD303).
[Pioneer 2]: Gives you suitable sound
setting with connecting tall type of speakers
(S-BD707T).
[Bypass]: Software with multichannel surround
audio signals is played according to the way it
was recorded.
[Bass Blast]: Reinforce the bass sound
e ect from front left and right speaker and
subwoofer.
[PL ll Movie]: Performs Pro Logic ll movie
mode decoding to the input signal and
produces  ve full-bandwidth output channels
from 2 channel sources. This setting is ideal for
watching videos of overdubbed or old movies.
This mode is available only to 2 channel
sources.
[PL ll Music]: Performs Pro Logic ll music mode
decoding to the input signal and produces
ve full-bandwidth output channels from
2 channel sources. This setting is ideal for
normal stereo sources such as CD. This mode is
available only to 2 channel sources.
[Clear Voice]: This mode makes voice sound
clear, improving the quality of voice sound.
[Game]: You can enjoy more virtual sound
while playing video games.
[Night]: This may be useful when you want to
watch movies at low volumes late at night.
[Mus. ReTouch]: When listening to MP3  les or
other compressed music, you can enhance the
sound. This mode is available only to 2 channel
sources.
[Loudness]: Improves bass and treble sound.
HB985-DB.BDEUPPK_ENG.indd 39HB985-DB.BDEUPPK_ENG.indd 39 2010-05-14  1:41:492010-05-14  1:41:49
40 Operation
Operation
4
General Playback
Playing Discs
1. Press
Z
OPEN/CLOSE, and place a disc on
the disc tray.
2. Press
Z
OPEN/CLOSE to close the disc tray.
For most Audio CD, BD-ROM and
DVD-ROM discs, playback starts
automatically.
3. Press
HOME MENU.
4. Select [Movie], [Photo] or [Music] using
U
/
u
/
I
/
i
, and press ENTER ( ).
5. Select the Disc option using
I
/
i
, and press
ENTER (
).
When you connect up to two devices, it
appears as above.
6. Select a  le using
U
/
u
/
I
/
i
, and press
B
PLAY or ENTER (
) to play the  le.
NOTE
Playback functions described in this manual are
not always available in every  les and medium.
Some functions can be restricted depending on
many factors.
Depending on the BD-ROM titles, a USB device
connection may be needed for proper playback.
4
Operation
HB985-DB.BDEUPPK_ENG.indd 40HB985-DB.BDEUPPK_ENG.indd 40 2010-05-14  1:41:492010-05-14  1:41:49
41Operation
4
Operation
To stop playback
Press
x
STOP during playback.
To pause playback
Press
X
PAUSE/STEP during playback.
Press
B
PLAY to resume playback.
To play frame-by-frame
Press
X
PAUSE/STEP while movie playback.
Press
X
PAUSE/STEP repeatedly to playback
Frame-by-Frame.
To scan forward or backward
Press
m
or
M
to play fast forward or fast
reverse during playback.
You can change the various playback speeds
by pressing
m
or
M
repeatedly.
To slow down the playing speed
While the playback is paused, press
M
SCAN
repeatedly to play various speeds of slow
motion.
To skip to the next/previous
chapter/track/ le
During playback, press
.
or
>
to go to
the next chapter/track/ le or to return to the
beginning of the current chapter/track/ le.
Press
.
twice brie y to step back to the
previous chapter/track/ le.
Using the disc menu
BD
DVD
AVCHD
To display the disc menu
The menu screen may be displayed  rst after
loading a disc which contains a menu. If you
want to display the disc menu during playback,
press MENU.
Use
U
/
u
/
I
/
i
buttons to navigate through
menu items.
To display the Pop-up menu
Some BD-ROM discs contain a Pop-up menu
that appears during playback.
Press POPUP/ TOP MENU during playback, and
use
U
/
u
/
I
/
i
buttons to navigate through
menu items.
Resume playback
BD
DVD
AVCHD
MOVIE
ACD
MUSIC
This unit remembers the
x
STOP depending
on the disc.
If “
Xx
(Resume Stop)” appears on the screen
brie y, press
B
(PLAY)
to resume playback
(from the scene point).
If you press
x
(STOP) twice or unload the disc,
x
”(Complete Stop) appears on the screen.
The unit will clear the stopped point.
NOTE
The resume point may be cleared when a
button is pressed (for example;
1
(POWER),
Z
(OPEN/CLOSE), etc).
On BD-Video discs with BD-J, the resume
playback function does not work.
If you press
x
(STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode .
HB985-DB.BDEUPPK_ENG.indd 41HB985-DB.BDEUPPK_ENG.indd 41 2010-05-14  1:41:492010-05-14  1:41:49
42 Operation
Operation
4
Advanced Playback
Repeat Playback
BD
DVD
AVCHD
ACD
MUSIC
During playback, press REPEAT (
) repeatedly
to select a desired repeat mode.
BDs/DVDs
A-
– Selected portion will be repeated
continually.
Chapter
The current chapter will be
played back repeatedly.
Title
The current title will be played
back repeatedly.
To return to normal playback, press REPEAT
(
) repeatedly to select [O ].
Audio CDs/Music  les
The current track or  le will be
played back repeatedly.
– All the tracks or  les will be played
back repeatedly.
The tracks or  les will be played back
in random order.
– All the tracks or  les will be
played back repeatedly in random order.
– Selected portion will be repeated
continually. (Audio CD only)
To return to normal playback, press CLEAR.
NOTE
If you press
>
once during Repeat Chapter/
Track playback, the repeat playback cancels.
This function may not work on some disc or title.
Repeating a speci c portion
BD
DVD
AVCHD
ACD
This player can repeat a portion you have
selected.
1. During playback, press REPEAT (
) to
select [A-] at the beginning of the portion
you wish to repeat. And then press ENTER
( ).
2. Press ENTER (
) at the end of the portion.
Your selected portion will be repeated
continually.
3. To return to normal playback, press REPEAT
(
) repeatedly to select [OFF] or press
CLEAR.
NOTE
You cannot select a portion less than 3 seconds.
Marker Search
BD
DVD
AVCHD
MOVIE
You can start playback from up to nine
memorized points.
To enter a marker
1. During playback, press MARKER at the
desired point. The Marker icon appears on
the TV screen brie y.
2. Repeat step 1 to add up to nine markers.
To recall a marked scene
1. Press SEARCH and the search menu appears
on the screen.
2. Press a number button to select a marker
number that you want to recall. Playback
starts from the marked scene.
HB985-DB.BDEUPPK_ENG.indd 42HB985-DB.BDEUPPK_ENG.indd 42 2010-05-14  1:41:492010-05-14  1:41:49
43Operation
4
Operation
To delete a Marker
1. Press SEARCH and the search menu appears
on the screen.
2. Press
u
to highlight a marker number. Use
I
/
i
to select a marked scene that you
want to delete.
3. Press CLEAR and the marked scene is erased
from the search menu.
NOTE
This function may not work depending on discs,
titles, server ability.
All marked points are cleared if the title is in
complete stop (
x
) mode, the title is changed or
if you unload the disc.
If the total length of the title is less than
10 seconds, this function is not available.
Using the search menu
BD
DVD
AVCHD
MOVIE
Using search menu, you can easy to  nd the
point where you want to start playback.
To search a point
1. During playback, press SEARCH to display
the search menu.
2. Press
I
/
i
to skip the playback 15 seconds
forward or backward. You can select a
point that you want to skip by pressing and
holding
I
/
i
button.
To start playback from a marked
scene
1. Press SEARCH and the search menu appears
on the screen.
2. Press
u
to highlight a marker number. Use
I
/
i
to select a marked scene that you
want to playback from.
3. Press ENTER (
) to start playback from the
marked scene.
NOTE
This function may not work depending on discs,
titles, server ability.
This function may not work on some [Home
Link] contents depending on the  le type and
ability of the DLNA server.
HB985-DB.BDEUPPK_ENG.indd 43HB985-DB.BDEUPPK_ENG.indd 43 2010-05-14  1:41:502010-05-14  1:41:50
44
Operation
Operation
4
Last Scene Memory
BD
DVD
This unit memorizes the last scene from the
last disc that is viewed. The last scene remains
in memory even if you remove the disc from
the unit or switch o the unit. If you load a disc
that has the scene memorized, the scene is
automatically recalled.
NOTE
Last Scene Memory function for a previous disc
is erased once a di erent disc is played.
This function may not work depending on the
disc.
This unit does not memorize settings of a disc if
you switch o the unit before commencing to
play it.
On-Screen display
You can display and adjust various information
and settings concerning the content.
Displaying content information
on-screen
BD
DVD
AVCHD
MOVIE
1. During playback, press DISPLAY (
) to show
various playback information.
a
h
g
f
e
d
c
b
a
Title – Current title number/total number
of titles
b
Chapter – Current chapter number/total
number of chapters
c
Time – Elapsed playing time/Total
playback time
d
Audio – Selected audio language or
channel
e
Subtitle – Selected subtitle
f
Angle – Selected angle/total number of
angles
g
TV Aspect Ratio – Selected a TV aspect
Ratio
h
Picture Mode – Selected picture mode
HB985-DB.BDEUPPK_ENG.indd 44HB985-DB.BDEUPPK_ENG.indd 44 2010-05-14  1:41:502010-05-14  1:41:50
45
Operation
4
Operation
2. Select an option using
U
/
u
.
3. Use
I
/
i
to adjust the selected option
value.
4. Press RETURN (
O
) to exit the On-Screen
display.
NOTE
If no button is pressed for a few seconds, the on-
screen display disappears.
A title number cannot be selected on some
discs.
Available items may di er depending on discs
or titles.
If BD interactive title is playing back, some
setting information is displayed on the screen
but prohibited to be changed.
Playing from selected time
BD
DVD
AVCHD
MOVIE
1. Press DISPLAY ( ) during playback. The
time search box shows the elapsed playing
time.
2. Select the [Time] option and then input
the required start time in hours, minutes,
and seconds from left to right.
For example, to  nd a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press
I
/
i
to skip the pl
ayback 60 seconds
forward or backward.
3. Press ENTER (
) to start playback from
selected time.
NOTE
This function may not work on some disc or
titles.
This function may not work on some [Home
Link] contents depending on the  le type and
ability of the DLNA server.
HB985-DB.BDEUPPK_ENG.indd 45HB985-DB.BDEUPPK_ENG.indd 45 2010-05-14  1:41:502010-05-14  1:41:50
46
Operation
Operation
4
Hearing di erent audio
BD
DVD
AVCHD
MOVIE
1. During playback, press DISPLAY ( ) to
display the on-screen display.
2. Use
U
/
u
to select the [Audio] option.
3. Use
I
/
i
to select desired audio language,
audio track or audio channel.
NOTE
Some discs allow you to change audio selections
only via the disc menu. If this is the case, press
POPUP/ TOP MENU or MENU button and choose
the appropriate audio from the selections on
the disc menu.
Immediately after you have switched sound,
there may be a temporary discrepancy between
the display and actual sound.
Selecting a subtitle language
BD
DVD
AVCHD
MOVIE
1. During playback, press DISPLAY ( ) to
display the on-screen display.
2. Use
U
/
u
to select the [Subtitle] option.
3. Use
I
/
i
to select the desired subtitle
language.
4. Press RETURN (
O
) to exit the On-Screen
display.
NOTE
Some discs allow you to change subtitle selections
only via the disc menu. If this is the case, press
POPUP/ TOP MENU or MENU button and choose
the appropriate subtitle from the selections on the
disc menu.
HB985-DB.BDEUPPK_ENG.indd 46HB985-DB.BDEUPPK_ENG.indd 46 2010-05-14  1:41:502010-05-14  1:41:50
47
Operation
4
Operation
Watching from a di erent angle
BD
DVD
If the disc contains scenes recorded at di erent
camera angles, you can change to a di erent
camera angle during playback.
1. During playback, press DISPLAY (
) to
display the on-screen display.
2. Use
U
/
u
to select the [Angle] option.
3. Use
I
/
i
to select desired angle.
4. Press RETURN (
O
) to exit the On-Screen
display.
Changing the TV Aspect Ratio
BD
DVD
AVCHD
MOVIE
You can change the TV aspect ratio setting
during playback.
1. During playback, press DISPLAY (
) to
display the on-screen display.
2. Use
U
/
u
to select the [TV Aspect Ratio]
option.
3. Use
I
/
i
to select desired option.
4. Press RETURN (
O
) to exit the On-Screen
display.
NOTE
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV Aspect
Ratio] option in the [Setup] menu is not changed.
Changing the Picture Mode
BD
DVD
AVCHD
MOVIE
You can change the [Picture mode] option
during playback.
1. During playback, press DISPLAY (
) to
display the on-screen display.
2. Use
U
/
u
to select the [Picture Mode]
option.
3. Use
I
/
i
to select desired option.
4. Press RETURN (
O
) to exit the On-Screen
display.
Setting the [User setting] option
1. During playback, press DISPLAY ( ) to
display the on-screen display.
2. Use
U
/
u
to select the [Picture Mode]
option.
3. Use
I
/
i
to select the [User setting] option,
and press ENTER (
).
4. Use
U
/
u
/
I
/
i
to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER
( ) to reset the all adjustments.
5. Use
U
/
u
/
I
/
i
to select the [Close] options,
and press ENTER (
) to  nish setting.
HB985-DB.BDEUPPK_ENG.indd 47HB985-DB.BDEUPPK_ENG.indd 47 2010-05-14  1:41:502010-05-14  1:41:50
48
Operation
Operation
4
Enjoying BD-LIVE
This unit allows you to enjoy functions such as
picture-in-picture, secondary audio and Virtual
packages, etc., with BD-Video supporting
BONUSVIEW (BD-ROM version 2 Pro le 1
version 1.1/ Final Standard Pro le).
Secondary video and audio can be played from
a disc compatible with the picture-in-picture
function. For the playback method, refer to the
instructions in the disc.
In addition to the BONUSVIEW function, BD-
Video supporting BD-LIVE (BD-ROM version
2 Pro le 2) that has a network extension
function allows you to enjoy more functions
such as downloading new movie trailers by
connecting this unit to the internet.
1. Check the network connection and settings
(pages 28-30).
2. Insert a USB storage device to the USB port
on the front panel.
A USB storage device is needed to
download bonus content.
USB Connection
3 . Press HOME MENU, and set the [BD-LIVE
connection] option on the [Setup] menu
(page 37).
Depending on the disc, the BD-LIVE
function may not operate if
[BD-LIVE connection] option is set to
[Partially Permitted].
4 . Insert a BD-ROM with BD-LIVE.
The operations may di er depending on
the disc. Refer to the manual supplied with
the disc.
NOTE
Do not extract the connected USB device while
content is being downloaded or a Blu-ray disc is
still in the disc tray. Doing so may damage the
connected USB device and BD-LIVE features may
not operate properly with the damaged USB
device anymore. If the connected USB device
seems damaged from such an action, you can
format the connected USB device from the PC
and reuse it with this player.
Some BD-LIVE contents may be restrictively
accessed in some territories by contents
provider’s own decision.
It may take up to several minutes to load and
start enjoying BD-LIVE contents.
HB985-DB.BDEUPPK_ENG.indd 48HB985-DB.BDEUPPK_ENG.indd 48 2010-05-14  1:41:502010-05-14  1:41:50
49
Operation
4
Operation
Playing movie  le and
VR discs
You can play DVD-RW discs that are recorded
in Video Recording (VR) format and movie  les
contained in a disc or USB device.
1. Press
HOME MENU.
2. Select [Movie] using
U
/
u
/
I
/
i
, and press
ENTER ( ).
3. Select the device using
I
/
i
, and press
ENTER ( ).
When you connect up to two devices, it
appears as above.
4. Select a  le using
U
/
u
/
I
/
i
, and press
B
PLAY or ENTER ( ) to play the  le.
NOTE
The  le requirements are described on page 11.
You can use various playback functions. Refer to
pages 40-47.
Un nalized DVD VR format discs may not be
played in this player.
Some DVD-VR disc are made with CPRM data
by DVD recorder. This unit cannot support these
kinds of discs.
What is CPRM?
CPRM is a copy protection system (with
scramble system) only allowing the recording of
copy once’ broadcast programmes. CPRM stands
for Content Protection for Recordable Media.
HB985-DB.BDEUPPK_ENG.indd 49HB985-DB.BDEUPPK_ENG.indd 49 2010-05-14  1:41:512010-05-14  1:41:51
50
Operation
Operation
4
Selecting a subtitle  le
MOVIE
If a movie  le name and the subtitle  le
name are the same, subtitle  le is played
automatically when playing the movie  le.
If the subtitle  le name is di erent with the
movie  le name, you need to select the subtitle
le on the [Movie] menu before playing the
movie.
1. Use
U
/
u
/
I
/
i
to select the subtitle  le you
wish to play in the [Movie] menu.
2. Press ENTER (
).
Press ENTER ( ) again to deselect the
subtitle  le. Selected subtitle  le will be
displayed when you play the movie  le.
NOTE
If you press
x
STOP during playback, the
subtitle selection is cancelled.
This function may not work in the [Home Link]
feature.
Changing subtitle code page
MOVIE
If the subtitle is not displayed properly, You
can change the subtitle code page to view the
subtitle  le properly.
1. During playback, press DISPLAY (
) to
display the on-screen display.
2. Use
U
/
u
to select the [Code Page] option.
3. Use
I
/
i
to select desired code option.
4. Press RETURN (
O
) to exit the On-Screen
display.
HB985-DB.BDEUPPK_ENG.indd 50HB985-DB.BDEUPPK_ENG.indd 50 2010-05-14  1:41:512010-05-14  1:41:51
51
Operation
4
Operation
Viewing a photo
You can view photo  les using this player.
1. Press
HOME MENU
2. Select [Photo] using
I
/
i
, and press ENTER
( ).
3. Select the device using
I
/
i
, and press
ENTER ( ).
When you connect up to two devices, it
appears as above.
4. Select a  le using
U
/
u
/
I
/
i
, and press
ENTER ( ) to view the photo.
To play a slide show
Press
B
PLAY to start slide show.
To stop a slide show
Press
x
STOP during slide show.
To pause a slide show
Press
X
PAUSE/STEP during slide show.
Press
B
PLAY to re-start the slide show.
To skip to the next/previous photo
While viewing a photo in full screen, press
I
or
i
to go to the previous or next photo.
NOTE
The  le requirements are described on page 11.
You can use various playback functions. Refer to
pages 40-47.
HB985-DB.BDEUPPK_ENG.indd 51HB985-DB.BDEUPPK_ENG.indd 51 2010-05-14  1:41:512010-05-14  1:41:51
52
Operation
Operation
4
Options while viewing a photo
You can use various options while viewing a
photo in full screen.
1. While viewing a photo in full screen, press
DISPLAY (
) to display the option menu.
2. Select an option using
U
/
u
.
a
g
f
e
d
c
b
h
a
Current photo/Total number of photos
– Use
I
/
i
to view previous/next photo.
b
Slide Show – Press ENTER (
) to start or
pause slide show.
c
Music Select – Select the background
music for the slide show.
d
Music –Press ENTER (
) to start or pause
background music.
e
Rotate – Press ENTER (
) to rotate the
photo clockwise.
f
Zoom – Press ENTER (
) to display the
[Zoom] menu.
g
E ect – Use
I
/
i
to select a transition
e ect between photos in a slide show.
h
Speed – Use
I
/
i
to select a delaying
speed between photos in a slide show.
3. Press RETURN (
O
) to exit the option menu.
Listening to music during a
slide show
You can display photo  les while listening to
music  les.
1. Press
HOME MENU
2. Select [Photo] or [Home Link] using
U
/
u
/
I
/
i
, and press ENTER ( ).
3. Select the [Disc] or [USB] option using
I
/
i
,
and press ENTER ( ).
Selecting a server or a share folder is
needed for [Home Link] menu.
4. Select a  le using
U
/
u
/
I
/
i
, and press
ENTER ( ) to view the photo.
5. Press
DISPLAY ( ) to display the option
menu.
6. Use
U
/
u
to select [Music Select] option,
and press ENTER (
) to display the [Music
Select] menu.
HB985-DB.BDEUPPK_ENG.indd 52HB985-DB.BDEUPPK_ENG.indd 52 2010-05-14  1:41:512010-05-14  1:41:51
53
Operation
4
Operation
7. Use
U
/
u
to select a device, and press ENTER
( ).
Devices that you can select may di er
depending on the location of the photo  le
you are displaying in full screen.
Photo location Available Device
Disc Disc, USB
USB Disc, USB
Share Folder on
your PC (CIFS)
CIFS
DLNA server DLNA server
8. Use
U
/
u
to select a  le or a folder you wish
to play.
Select a folder and press ENTER ( ) to
display the lower directory.
Select
and press ENTER ( ) to display
the upper directory.
NOTE
When selecting music from [Home Link], folder
selection is not available. Only  le selection is
available on the [Home link].
9. Use
i
to select [OK], and press ENTER ( )
to complete music selection.
Listening to music
The player can play Audio CDs and music  les
1. Press
HOME MENU
2. Select [Music] using
U
/
u
/
I
/
i
, and press
ENTER ( ).
3. Select the device using
I
/
i
, and press
ENTER ( ).
When you connect up to two devices, it
appears as above.
4. Select a music  le or audio track using
U
/
u
/
I
/
i
, and press ENTER (
) to play the
music.
NOTE
The  le requirements are described on page 11.
You can use various playback functions. Refer to
pages 40-47.
HB985-DB.BDEUPPK_ENG.indd 53HB985-DB.BDEUPPK_ENG.indd 53 2010-05-14  1:41:522010-05-14  1:41:52
54
Operation
Operation
4
Audio CD Recording
You can record one desired track or all of the
tracks in Audio CD to a USB storage device.
1. Insert a USB storage device to the USB port
on the front panel.
2. Press
Z
(OPEN/CLOSE), and place an Audio
CD on the disc tray.
Press
Z
(OPEN/CLOSE) to close the disc
tray. The playback starts automatically.
3. Press DISPLAY ( ) to display the option
menu.
Or
Press
z
USB REC button on the remote
control. You can record all musics in the
audio CD.
4. Use
U
/
u
to select [CD Recording] option,
and press ENTER (
) to display the [CD
Recording] menu.
Repeat this step to select tracks as many as
you want.
5. Use
U
/
u
to select a track you wish to copy
on the menu, and press ENTER (
).
Repeat this step to select tracks as many as
you can.
Select all the tracks on an Audio
CD.
Selects an encoding option from
the pop-up menu (128 kbps,
192 kbps, 320 kbps or Lossless).
Cancels the recording and
returns to the previous screen.
6. Use
U
/
u
/
I
/
i
to select [Start], and press
ENTER (
).
7. Use
U
/
u
/
I
/
i
to select the destination
folder to be copied.
If you want to create a new folder, use
U
/
u
/
I
/
i
to select [New Folder] and press ENTER
( ).
Enter a folder name using the virtual
keyboard, and press ENTER ( ) while [OK] is
selected.
8. Use
U
/
u
/
I
/
i
to select [OK], and press
ENTER (
) to start Audio CD recording.
If you want to stop the Audio CD recording,
press ENTER ( ) while [Cancel] is
highlighted.
9. A message appears when Audio CD
recording is completed. Press ENTER (
)
to check the music  le created in the
destination folder.
HB985-DB.BDEUPPK_ENG.indd 54HB985-DB.BDEUPPK_ENG.indd 54 2010-05-14  1:41:522010-05-14  1:41:52
55
Operation
4
Operation
NOTE
The table below shows the average recording
time from an audio track with 4 minutes of
playback time to a music  le with 192 kbps as an
example.
stop mode during playback
1.4 min. 2 min.
All times in the above table are approximate.
Actual recording time for USB storage device
varies depending on the USB storage device’s
ability.
Make sure that there is minimum of 50 MB free
space when recording into the USB storage
device.
The length of the music should be longer than
20 seconds for the proper recording.
Do not turn o this player or extract the
connected USB storage device during Audio CD
recording.
The making of unauthorized copies of
copy-protected material, including computer
programmes,  les, broadcasts and sound
recordings, may be an infringement of copyrights
and constitute a criminal o ense.
This equipment should not be used
for such purposes.
Be responsible
Respect copyrights
HB985-DB.BDEUPPK_ENG.indd 55HB985-DB.BDEUPPK_ENG.indd 55 2010-05-14  1:41:532010-05-14  1:41:53
56
Operation
Operation
4
Playing the iPod
You can enjoy the sound with your iPod. For
details about iPod, refer to the iPods User
Guide.
Preparation
To view iPod’s Videos and Photos on the TV
screen.
- Be sure to use the video connection
through the VIDEO OUT jack on the rear
panel of this unit. Select the appropriate
video input mode on the TV.
- Depending on the iPod, make sure that
select Videos > Video settings, and then
set TV Out to Ask or On from your iPod.
For details about Video Settings, refer to
the iPod User Guide.
- The viewing photos is available only if this
unit is in iPod IN mode and you can view
photos only as a slide show. You have to
start a slide show on your iPod to view a
photo on a TV. For details about a slide
show, refer to the iPod User Guide.
Before connecting the iPod, turn this unit
o and reduce the volume of this unit to its
minimum.
1. Connect the iPod  rmly.
Connect the iPod
Connect the cradle and
put your iPod on it.
2. Select a  le using
U
/
u
/
I
/
i
, and press
ENTER (
) to play the  le.
Enjoying iPod on the screen
1. Connect the iPod  rmly.
2. Press HOME MENU ( ).
3. Select [Music] or [Movie] using
I
/
i
, and
press ENTER ( ).
If you connected the other device
(CD or USB), select the iPod on the menu.
4. Select a content using
U
/
u
/
I
/
i
, and press
ENTER (
) to play.
HB985-DB.BDEUPPK_ENG.indd 56HB985-DB.BDEUPPK_ENG.indd 56 2010-05-14  1:41:532010-05-14  1:41:53
57
Operation
4
Operation
Enjoying the iPod IN mode
You can operate your iPod by using the
supplied remote control and controls on your
iPod.
1. Connect the iPod  rmly.
If you turn this unit on, your iPod is
automatically turned on and recharging
starts.
2. Press INPUT/TUNER to select iPod IN mode.
U
/
u
/
I
/
i
Selects an option in the menu.
B
/ENTER
Starts playback the music or
video.
X
To pause while it is playing. To
resume playing, press
B
(PLAY)
again.
m
/
M
Fast-forward or rewind a song
or video
.
/
>
Skip the playback forward or
backward .
REPEAT To select a desired repeat
mode: Track
( )
, All
( )
, O
(No display).
NOTE
This system is compatible with the audio and video
of the iPod(4th generation), iPod nano, iPod classic,
iPod mini, iPod touch and iPhone (iPod shu e is
not supported.).
NOTE
An error message “CHECK IPOD or “Connected
iPod model is not supported. appears when:
- your iPod is not available for the function to be
operated.
An error message “CHECK IPOD or “Please
update iPod’s software. appears when:
- your iPod has an old software version.
t
Update your iPod software to latest version.
If this unit displays an error message, follow the
message. An error message “CHECK IPOD” or
“Please check your iPod. appears when:
- the communication between this unit and
your iPod is failed.
t
Undock & re-dock your iPod in this unit.
- your iPod is not connected  rmly.
- this unit recognises your iPod as unknown
device.
- your iPod is exceptionally low on power.
t
The battery needs to be charged.
t
If you charge the battery while iPod is
extremely low in power, it may take longer
to charge.
You may use the dock adapter which should
be supplied with your iPod to the dock for the
stable use of the iPod. If you need an adapter,
consult your iPod dealer.
Compatibility with your iPod may vary
depending on the type of your iPod.
iPod touch and iPhone have any di erence in
operation other than iPod. You may need any
additional control to use them with this unit.
(e.g. “slide to unlock”)
If you use an application, make a call, or send
and receive SMS text message, etc. on iPod
touch or iPhone, disconnect it from iPod dock of
this unit and then use it.
Depending on your iPod’s software version, it
may not be possible to control your iPod from
this unit. We recommend installing the latest
software version.
The video quality depends on the video sources
on your iPod.
If you have a problem with your iPod, please visit
www.apple.com/support/ipod.
HB985-DB.BDEUPPK_ENG.indd 57HB985-DB.BDEUPPK_ENG.indd 57 2010-05-14  1:41:532010-05-14  1:41:53
58
Operation
Operation
4
Radio Operations
Be sure that the antenna is connected.
(Refer to the page 24)
Listening to the radio
1. Press INPUT/TUNER until TUNER (FM)
appears in the display window. The last
received station is tuned in.
2. Press and hold TUNE (-/+) for about two
seconds until the frequency indication
starts to change. Scanning stops when the
unit tunes in a station. Or Press TUNE (-/+)
repeatedly.
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL (+/- ) on
the remote control.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press INPUT/TUNER until the TUNER (FM)
appears in the display window.
2. Select the desired frequency by using TUNE
(-/+).
3. Press ENTER (
) a preset number will  ash
in the display window.
4. Press PRESET to select the preset number
you want.
5. Press ENTER (
). The station is stored.
6. Repeat the steps 2 to 5 to store other
stations.
Deleting all the saved stations
Press and hold CLEAR for two seconds.
“ERASE ALL will  ash up. Press CLEAR again.
Then all the saved stations are deleted.
Improving poor FM reception
Press D (blue) (ST/ MONO) coloured button on
the remote control. This will change the tuner
from stereo to mono and usually improve the
reception.
See information about a radio
station
The FM tuner is supplied with the RDS (Radio
Data System) facility. This shows information
about the radio station being listened to. Press
RDS repeatedly to cycle through the various
data types:
PS (Programme Service Name)
The name of the channel will
appear in the display
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or
News) will appear in the display.
RT (Radio Text)
A text message contains special
information from the broadcast
station. This text may scroll across
the display.
CT (Time controlled by the channel)
This shows the time and date as
broadcast by the station.
HB985-DB.BDEUPPK_ENG.indd 58HB985-DB.BDEUPPK_ENG.indd 58 2010-05-14  1:41:532010-05-14  1:41:53
59
Operation
4
Operation
Playing content via
your home network
This player can browse and play content from
your PC and DLNA certi ed media servers
connected on your home network.
About DLNA
This Player is a DLNA Certi ed digital media
player that can display and play movie,
photo and music content from your DLNA-
compatible digital media server (PC and
Consumer Electronics).
The Digital Living Network Alliance (DLNA)
is a cross-industry organization of consumer
electronics, computing industry and mobile
device companies. Digital Living provides
consumers with easy sharing of digital media
through a network in the home.
The DLNA certi cation logo makes it easy
to  nd products that comply with the DLNA
Interoperability Guidelines. This unit complies
with DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software
or other devices may be required. Please refer
to the operating instructions for the software
or device for more information.
Accessing a DLNA media server
1. Check the network connection and settings
(pages 28-30).
2. Press
HOME MENU.
3. Select [Home Link] using
U
/
u
/
I
/
i
, and
press ENTER (
).
4. Select a DLNA media server from the list
using
U
/
u
, and press ENTER ( ).
If you want to rescan for available media
servers, press the green (B) coloured button.
NOTE
Depending on the media server, this player may
need to get permission from the server.
5. Select a  le using
U
/
u
/
I
/
i
, and press
ENTER (
) to play the  le.
HB985-DB.BDEUPPK_ENG.indd 59HB985-DB.BDEUPPK_ENG.indd 59 2010-05-14  1:41:532010-05-14  1:41:53
60
Operation
Operation
4
NOTE
The  le requirements are described on page 11.
You can use various playback functions. Refer to
pages 40-47.
The  le requirements on page 11 are not always
compatible. There may be some restrictions due
to the  le’s features and media servers ability.
The thumbnail of the unplayable  les can be
displayed in the [Home Link] menu, but those
cannot be played on this player.
If there is an unplayable music  le in the [Home
Link] menu, the player skips the  le and plays
the next  le.
The subtitle  le name and movie  le name have
to be the same and located in the same folder.
The playback and operating quality of the
[Home Link] function may be a ected by your
home network condition.
The  les from removable media such as USB
drive, DVD-drive etc. on your media server may
not be shared properly.
Accessing a share folder from
your PC
1. Start your PC that is connected on your
local area network.
2. On your PC, share folders which contain
movie, photo or music  les.
3. On the player, check the network
connection and settings (pages 28-30).
4. Press
HOME MENU.
5. Select [Home Link] using
U
/
u
/
I
/
i
, and
press ENTER (
).
6. Select a share folder from the list using
U
/
u
,
and press ENTER (
).
If you want to rescan available media
servers, press the green (B) coloured button.
NOTE
Depending on the share folder, this player may
need to input network user ID and password for
accessing the folder.
7. Select a  le using
U
/
u
/
I
/
i
, and press
ENTER ( ) to play the  le.
HB985-DB.BDEUPPK_ENG.indd 60HB985-DB.BDEUPPK_ENG.indd 60 2010-05-14  1:41:532010-05-14  1:41:53
61
Operation
4
Operation
NOTE
The  le requirements are described on page 11.
You can use various playback functions. Refer to
pages 40-47.
The thumbnail of the unplayable  les can be
displayed in the [Home Link] menu, but those
cannot be played on this player.
If there is an unplayable music  le in the [Home
Link] menu, the player skips the  le and play
next  le.
The subtitle  le name and movie  le name have
to be the same and located at the same folder.
The playback and operating quality of the
[Home Link] function may be a ected by your
home network condition.
The  les on a removable media such as USB
drive, DVD-drive etc. on your PC may not be
shared properly.
You may experience connection problems
depending on your PC’s environment.
PC requirements
Windows® XP (Service Pack 2 or higher),
Windows Vista® (no Service Pack required)
Windows 7®
1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
Network environment: 100 Mb Ethernet,
WLAN (IEEE 802.11b/g/n)
NOTE
If you use Windows® XP or Windows Vista®, visit link
below for more information on  le share settings.
HB985-DB.BDEUPPK_ENG.indd 61HB985-DB.BDEUPPK_ENG.indd 61 2010-05-14  1:41:532010-05-14  1:41:53
62
Operation
Operation
4
Entering a network user ID and the
password
Depending on your PC’s environment, you
may need to enter a network user ID and the
password for accessing a shared folder.
1. The keyboard menu appears automatically
if the network user ID and the password are
required.
2. Use
U
/
u
/
I
/
i
to select a character then
press ENTER ( ) to con rm your selection
on the keyboard menu.
To enter a letter with an accent mark, select
the letter from the extended character set.
Example: Select “D” and then press DISPLAY
( ) to display the extended character set.
Use
I
/
i
to select “D or “Ď and then press
ENTER ( ).
[Clear] – Clear all entered characters.
[Space] – Inserts a space at the cursor
position.
[<–] – Deletes the previous character at the
cursor position.
[ABC / abc / #+-=&] – Change the keyboard
menu settings to capital letters, small letters
or symbols.
3. When you  nish entering the network user
ID and password, select [OK] using
U
/
u
/
I
/
i
and press ENTER (
) to access the folder.
The network user ID and password will be
remembered after accessing the folder
for your convenience. If you do not want
the network user ID and password to be
remembered, press red (A) coloured button
to un-tick the [Remember] check box
before accessing the folder.
HB985-DB.BDEUPPK_ENG.indd 62HB985-DB.BDEUPPK_ENG.indd 62 2010-05-14  1:41:542010-05-14  1:41:54
63
Maintenance
5
Maintenance
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
Cleaning Discs
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as
insecticide spray near the unit.
Wiping with strong pressure may damage
the surface.
Do not leave rubber or plastic products in
contact with the unit for a long period of
time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If
the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as
alcohol, benzine, or thinner, as these might
damage the surface of the unit.
Maintaining the Unit
The unit is a high-tech, precision device. If
the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished. For details, please contact your
nearest authorized service centre.
5
Maintenance
HB985-DB.BDEUPPK_ENG.indd 63HB985-DB.BDEUPPK_ENG.indd 63 2010-05-14  1:41:542010-05-14  1:41:54
64
Troubleshooting
Troubleshooting
6
6
Troubleshooting
General
The Power does not turn
on.
Plug the power cord into the wall outlet securely.
The unit does not start
playback.
Insert a playable disc. (Check the disc type, colour system,
and regional code.)
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
Cancel the rating function or change the rating level.
The angle cannot be
changed.
Multi-angles are not recorded on the DVD Video being
played.
The subtitle language
cannot be changed or
turned o .
Subtitles are not recorded on the DVD Video being played.
Cannot play MP3/WMA/
JPEG/DivX  les.
The  les are not recorded in a format that the unit can play.
The unit does not support the codec of the movie  le.
The remote control does
not work properly.
The remote control is not pointed at the remote sensor of
the unit.
The remote control is too far from the unit.
There is an obstacle in the path between the remote control
and the unit.
The battery in the remote control is exhausted.
HB985-DB.BDEUPPK_ENG.indd 64HB985-DB.BDEUPPK_ENG.indd 64 2010-05-14  1:41:542010-05-14  1:41:54
65
Troubleshooting
6
Troubleshooting
Picture
There is no picture. Select the appropriate video input mode on the TV so the
picture from the unit appears on the TV screen.
Connect the video connection securely.
Check the [HDMI Colour Setting] in the [Setup] menu is
set to the appropriate item that conforms to your video
connection.
Your TV may not support the resolution you have set on the
player. Change the resolution to one that your TV accepts.
The players HDMI OUT jack is connected to a DVI device that
does not support copyright protection.
Picture noise appears You are playing a disc recorded in a colour system that is
di erent from your TV.
Set the resolution to one that your TV accepts.
Sound
There is no sound or the
sound is distorted.
The unit is in scan, slow motion, or pause mode.
The sound volume is low.
Check the speaker cable connection. (page 16)
HB985-DB.BDEUPPK_ENG.indd 65HB985-DB.BDEUPPK_ENG.indd 65 2010-05-14  1:41:542010-05-14  1:41:54
66
Troubleshooting
Troubleshooting
6
Network
BD-LIVE feature does not
work.
The connected USB storage may not have enough space.
Connect the USB storage with at least 1GB free space.
Ensure that the unit is correctly connected to the local area
network and can access the internet (see page 28).
Your broadband speed may not be fast enough to use the
BD-LIVE features. Contact your Internet Service Provider (ISP)
and increase the broadband speed to suit the unit’s.
The [BD-LIVE connection] option in the [Setup] menu is set
to [Prohibited]. Set the option to [Permitted].
Design and speci cations are subject to change without notice.
Updates
Note that information on this product is available on the Pioneer website. Please check the
website for information on updating or servicing your Blu-ray Disc PLAYER.
HB985-DB.BDEUPPK_ENG.indd 66HB985-DB.BDEUPPK_ENG.indd 66 2010-05-14  1:41:542010-05-14  1:41:54
67
Appendix
7
Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your PIONEER TV using the
buttons below.
TV Control
Buttons
Button Operation
1
(TV Power)
Turn the TV on or o .
INPUT Switch the TVs input source
between the TV and other
input sources.
CH +/- Scan up or down through
memorized channels.
VOL +/- Adjust the volume of the
TV.
NOTE
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
Setting up the remote to
control your TV
You can operate your TV with the supplied
remote control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down
1
(TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the
table below).
Manufacturer Code Number
Pioneer 1(Default)
Sony 2, 3
Panasonic 4, 5
Samsung 6, 7
LG 8, 9
2. Release the
1
(TV POWER) button to
complete setting.
Depending on your TV, some or all buttons
may not function on the TV, even after
entering the correct manufacturer code. When
you replace the batteries of the remote, the
code number you have set may be reset to
the default setting. Set the appropriate code
number again.
7
Appendix
HB985-DB.BDEUPPK_ENG.indd 67HB985-DB.BDEUPPK_ENG.indd 67 2010-05-14  1:41:542010-05-14  1:41:54
68
Appendix
Appendix
7
Area Code List
Choose an area code from this list.
Area Code Area Code Area Code Area Code
Afghanistan AF
Argentina AR
Australia AU
Austria AT
Belgium BE
Bhutan BT
Bolivia BO
Brazil BR
Cambodia KH
Canada CA
Chile CL
China CN
Colombia CO
Congo CG
Costa Rica CR
Croatia HR
Czech Republic CZ
Denmark DK
Ecuador EC
Egypt EG
El Salvador SV
Ethiopia ET
Fiji FJ
Finland FI
France FR
Germany DE
Great Britain GB
Greece GR
Greenland GL
Hong Kong HK
Hungary HU
India IN
Indonesia ID
Israel IL
Italy IT
Jamaica JM
Japan JP
Kenya KE
Kuwait KW
Libya LY
Luxembourg LU
Malaysia MY
Maldives MV
Mexico MX
Monaco MC
Mongolia MN
Morocco MA
Nepal NP
Netherlands NL
Netherlands
Antilles AN
New Zealand NZ
Nigeria NG
Norway NO
Oman OM
Pakistan PK
Panama PA
Paraguay PY
Philippines PH
Poland PL
Portugal PT
Romania RO
Russian
Federation RU
Saudi Arabia SA
Senegal SN
Singapore SG
Slovak Republic SK
Slovenia SI
South Africa ZA
South Korea KR
Spain ES
Sri Lanka LK
Sweden SE
Switzerland CH
Taiwan TW
Thailand TH
Turkey TR
Uganda UG
Ukraine UA
United States US
Uruguay UY
Uzbekistan UZ
Vietnam VN
Zimbabwe ZW
HB985-DB.BDEUPPK_ENG.indd 68HB985-DB.BDEUPPK_ENG.indd 68 2010-05-14  1:41:542010-05-14  1:41:54
69
Appendix
7
Appendix
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language Code Language Code Language Code Language Code
Afar 6565
Afrikaans 6570
Albanian 8381
Ameharic 6577
Arabic 6582
Armenian 7289
Assamese 6583
Aymara 6588
Azerbaijani 6590
Bashkir 6665
Basque 6985
Bengali; Bangla 6678
Bhutani 6890
Bihari 6672
Breton 6682
Bulgarian 6671
Burmese 7789
Byelorussian 6669
Chinese 9072
Croatian 7282
Czech 6783
Danish 6865
Dutch 7876
English 6978
Esperanto 6979
Estonian 6984
Faroese 7079
Fiji 7074
Finnish 7073
French 7082
Frisian 7089
Galician 7176
Georgian 7565
German 6869
Greek 6976
Greenlandic 7576
Guarani 7178
Gujarati 7185
Hausa 7265
Hebrew 7387
Hindi 7273
Hungarian 7285
Icelandic 7383
Indonesian 7378
Interlingua 7365
Irish 7165
Italian 7384
Japanese 7465
Kannada 7578
Kashmiri 7583
Kazakh 7575
Kirghiz 7589
Korean 7579
Kurdish 7585
Laothian 7679
Latin 7665
Latvian, Lettish 7686
Lingala 7678
Lithuanian 7684
Macedonian 7775
Malagasy 7771
Malay 7783
Malayalam 7776
Maori 7773
Marathi 7782
Moldavian 7779
Mongolian 7778
Nauru 7865
Nepali 7869
Norwegian 7879
Oriya 7982
Panjabi 8065
Pashto, Pushto 8083
Persian 7065
Polish 8076
Portuguese 8084
Quechua 8185
Rhaeto-Romance
8277
Rumanian 8279
Russian 8285
Samoan 8377
Sanskrit 8365
Scots Gaelic 7168
Serbian 8382
Serbo-Croatian 8372
Shona 8378
Sindhi 8368
Singhalese 8373
Slovak 8375
Slovenian 8376
Spanish 6983
Sudanese 8385
Swahili 8387
Swedish 8386
Tagalog 8476
Tajik 8471
Tamil 8465
Telugu 8469
Thai 8472
Tonga 8479
Turkish 8482
Turkmen 8475
Twi 8487
Ukrainian 8575
Urdu 8582
Uzbek 8590
Vietnamese 8673
Volapük 8679
Welsh 6789
Wolof 8779
Xhosa 8872
Yiddish 7473
Yoruba 8979
Zulu 9085
HB985-DB.BDEUPPK_ENG.indd 69HB985-DB.BDEUPPK_ENG.indd 69 2010-05-14  1:41:542010-05-14  1:41:54
70
Appendix
Appendix
7
Video output resolution
When the non-copy protected media is playing back
Video Out
Resolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected HDMI disconnected
576i (480i) 576p (480i) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 720p
1080i 1080i 1080i
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 1080i
1080p / 50 (60) Hz 1080p / 50 (60) Hz 576i (480i) 1080i
When the copy protected media is playing back
Video Out
Resolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected HDMI disconnected
576i (480i) 576p (480p) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 576i (480i) 576p (480p)
1080i 1080i 576i (480i) 576p (480p)
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 576p (480p)
1080p / 50 (60) Hz 1080p / 50 (60) Hz 576i (480i) 576p (480p)
HDMI OUT connection
For the 576i (480i) resolution setting, real
output resolution of HDMI OUT will change
to 576p (480p).
If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
The 1080p video output frame rate may
be automatically set to either 24 Hz or
50 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
COMPONENT VIDEO OUT connection
BD or DVD could prevent up-scaling on
analogue output.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always
outputted at 576i (480i) resolution.
HB985-DB.BDEUPPK_ENG.indd 70HB985-DB.BDEUPPK_ENG.indd 70 2010-05-14  1:41:542010-05-14  1:41:54
71
Appendix
7
Appendix
“Blu-ray Disc” and are trademarks.
“BD-LIVE” logo is a trademark of Blu-ray Disc
Association.
“BONUSVIEW is trademark of Blu-ray Disc
Association.
Java and all Java-based trademarks and logos
are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
Manufactured under licence from Dolby
Laboratories. Dolby, and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under licence under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide
patents issued & pending. DTS and the Symbol are
registered trademarks, & DTS-HD, DTS-HD Master
Audio l Essential and the DTS logos are trademarks
of DTS, Inc. Product includes software. © DTS, Inc.
All Rights Reserved.
HDMI, the HDMI Logo and High-De nition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing, LLC in the United
States and other countries.
is a trademark of DVD Format/Logo Licensing
Corporation.
TM
DLNA and DLNA CERTIFIED are trademarks and /
or service marks of Digital Living Network Alliance.
DivX is a registered trademark of DivX, Inc., and is
used under licence.
“x.v.Colour or “x.v.Colour” is a trademark of Sony
Corporation.
Trademarks and Licences
HB985-DB.BDEUPPK_ENG.indd 71HB985-DB.BDEUPPK_ENG.indd 71 2010-05-14  1:41:542010-05-14  1:41:54
72
Appendix
Appendix
7
AVCHD” and the AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
This product is licenced under the AVC patent
portfolio licence and VC-1 patent portfolio licence
for the personal and non-commercial use of a
consumer to (i) encode video in compliance
with the AVC Standard and VC-1 Standard (“AVC/
VC-1 Video”) and/or (ii) decode AVC/VC-1 Video
that was encoded by a consumer engaged in
a personal and non-commercial activity and/or
was obtained from a video provider licenced to
provide AVC/VC-1 Video. No licence is granted
or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
iPod is a trademark of Apple Inc., registered in the
U.S. and other countries.
iPhone is a trademark of Apple Inc.
“Made for iPod” means that an electronic accessory
has been designed to connect speci cally to iPod
and has been certi ed by the developer to meet
Apple performance standards.
Works with iPhone means that an electronic
accessory has been designed to connect
speci cally to iPhone and has been certi ed
by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and / or other countries.
This product includes technology owned by Microsoft
Corporation and cannot be used or distributed
without a license from Microsoft Licensing, Inc.
®
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices
within a max. range of 10 meters.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges.
A mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Pioneer Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
HB985-DB.BDEUPPK_ENG.indd 72HB985-DB.BDEUPPK_ENG.indd 72 2010-05-14  1:41:552010-05-14  1:41:55
73
Appendix
7
Appendix
Speci cations
General
• Power requirements:
AC 220-240 V, 50/ 60 Hz
• Power consumption:
150 W
In Standby mode: Less than 0.5W
Dimensions (W x H x D):
Approx. 430 × 64 × 304 mm
• Net Weight (Approx.):
3.6 kg
• Operating temperature:
41 °F to 95 °F (5 °C to 35 °C)
• Operating humidity:
5 % to 90 %
Bus Power supply (USB):
DC 5V
500 mA
Inputs/ Outputs
• VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
• COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1,
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
HDMI OUT (video/audio):
19 pin (HDMI standard, Type A, Version 1.3)
Analogue AUDIO IN:
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DIGITAL IN (OPTICAL 1/2):
3 V (p-p), Optical jack x 2
• PORTABLE IN:
0.5 Vrms (3.5 mm stereo jack)
Tuner
• FM Tuning Range:
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Ampli er
Power output, (PEAK), (4Ω/3Ω)
Total 1100 W
Front 180 W x 2
Centre 180 W
Rear 180 W x 2
Sub-Woofer 200 W (Passive)
Power output, (RMS), THD 10% (4Ω/3Ω)
Total 930 W
Front 150 W x 2
Centre 150 W
Rear 150 W x 2
Sub-Woofer 180 W (Passive)
System
• Laser:
Semiconductor laser
Wavelength: 405 nm / 650 nm
• Signal system:
Standard NTSC/PAL colour TV system
• Frequency response:
20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)
• LAN port:
Ethernet jack x 1, 10BASE-T/100BASE-TX
HB985-DB.BDEUPPK_ENG.indd 73HB985-DB.BDEUPPK_ENG.indd 73 2010-05-14  1:41:552010-05-14  1:41:55
74
Appendix
Appendix
7
Speakers for BCS-707
S-BD707
Front/Surround speaker (Left/ Right)
Type: 2 Way
Impedance Rated: 4 Ω
Net Dimensions 260 x 1097 x 260 mm
(W x H x D):
Net Weight: 3.8 kg
• Centre speaker
Type: 1 Way
Impedance Rated: 4 Ω
Net Dimensions 300 x 87x 65 mm
(W x H x D):
Net Weight: 0.6 kg
S-BD707SW
• Subwoofer
Type: 1 Way 1 speaker
Impedance Rated: 3 Ω
Net Dimensions 130.5 x 420 x 375 mm
(W x H x D):
Net Weight: 4.4 kg
Speakers for BCS-303
S-BD303
Front/Surround speaker (Left/ Right)
Type: 1 Way
Impedance Rated: 4 Ω
Net Dimensions 96 x 96 x 85 mm
(W x H x D):
Net Weight: 0.4 kg
• Centre speaker
Type: 1 Way
Impedance Rated: 4 Ω
Net Dimensions 300 x 87x 65 mm
(W x H x D):
Net Weight: 0.6 kg
• Subwoofer
Type: 1 Way 1 speaker
Impedance Rated: 3 Ω
Net Dimensions 130.5 x 420 x 375 mm
(W x H x D):
Net Weight: 4.4 kg
HB985-DB.BDEUPPK_ENG.indd 74HB985-DB.BDEUPPK_ENG.indd 74 2010-05-14  1:41:552010-05-14  1:41:55
75
Appendix
7
Appendix
Open source software
notice
The following GPL executables and LGPL libraries
used in this product are subject to the GPL2.0/
LGPL2.1 License Agreements:
GPL EXECUTABLES: Linux kernel 2.6, bash, busybox,
cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils,
net-tools, procps, samba-3.0.25b, sysutils, tcpdump,
tftpd, tinylogin, unzip, utelnetd
LGPL LIBRARIES: uClibc, DirectFB, blow sh, cairo,
mpeg, iconv, libusb, mpg123
gSOAP Public License 1.3 LIBRARY: gsoap
A copy of the corresponding source code can be
obtained by being charged the fee for distribution.
To obtain a copy, contact your local Pioneer
Customer Support .
You can obtain a copy of the GPL, LGPL licenses
from http://www.gnu.org/licenses/old-licenses/
gpl-2.0.html and http://www.gnu.org/licenses/old-
licenses/lgpl-2.1.html .
Also you can obtain a copy of gSOAP public license
from http://www.cs.fsu.edu/~engelen/license.html.
This software is based in part on the work of the
Independent JPEG Group copyright © 1991 - 1998,
Thomas G. Lane.
This product includes
boost C++: copyright © Beman Dawes 1999-2003
c-ares : copyright © 1998 by the Massachusetts
Institute of Technology
curl: copyright © 1996 - 2008, Daniel Stenberg
expat: copyright © 2006 expat maintainers
freetype: copyright © 2003 The FreeType Project
(www.freetype.org).
jpeg: This software is based in part on the work of
the Independent JPEG Group copyright © 1991 –
1998, Thomas G. Lane.
mng: copyright © 2000-2007 Gerard Juyn, Glenn
Randers-Pehrson
ntp : copyright © David L. Mills 1992-2006
• OpenSSL:
cryptographic software written by Eric Young
(eay@cryptsoft.com).
software written by Tim Hudson
(tjh@cryptsoft.com).
software developed by the OpenSSL Project
for use in the OpenSSL Toolkit.
(http://www.openssl.org)
png: copyright © 2004 Glenn Randers-Pehrson
portmap : copyright © 1990 The Regents of the
University of California
ptmalloc : copyright © 2001-2006 Wolfram Gloger
UnitTest++ : copyright © 2006 Noel Llopis and
Charles Nicholson
UPnP SDK : copyright © 2000-2003 Intel
Corporation
• strace :
copyright © 1991, 1992 Paul Kranenburg
copyright © 1993 Branko Lankester
copyright © 1993 Ulrich Pegelow
copyright © 1995, 1996 Michael Elizabeth Chastain
copyright © 1993, 1994, 1995, 1996 Rick Sladkey
copyright © 1999,2000 Wichert Akkerman
xml2 : copyright © 1998-2003 Daniel Veillard
XML-RPC For C/C++:
copyright © 2001 by First Peer, Inc. All rights
reserved.
copyright © 2001 by Eric Kidd. All rights reserved.
zlib: copyright © 1995-2002 Jean-loup Gailly and
Mark Adler.
All rights reserved.
Permission is hereby granted, free of charge, to
any person obtaining a copy of this software and
associated documentation  les (the “Software”), to
deal in the Software without restriction, including
without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to
the following conditions:
THE SOFTWARE IS PROVIDED AS IS”, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
HB985-DB.BDEUPPK_ENG.indd 75HB985-DB.BDEUPPK_ENG.indd 75 2010-05-14  1:41:552010-05-14  1:41:55
2 Consignes de sécurité
Consignes de sécurité
1
ATTENTION
RISQUE D’ÉLECTROCUTION NE
PAS OUVRIR
ATTENTION: AFIN DE MINIMISER LES RISQUES
D’ÉLECTROCUTION, NE RETIREZ PAS LE
COUVERCLE (OU LARRIÈRE) AUCUNE PIÈCE DE CET
APPAREIL N’EST SUSCEPTIBLE D’ÊTRE RÉPARÉE PAR
L’UTILISATEUR CONFIEZ L’ENTRETIEN DE LAPPAREIL
À DES PERSONNES QUALIFIÉES.
Le symbole d’un éclair à l’intérieur
d’un triangle sert à avertir
l’utilisateur de la présence d’une
tension dangereuse non isolée
dans le corps de l’appareil, qui peut
être su samment élevée pour
provoquer un risque
d’électrocution.
Le symbole d’un point
d’exclamation à l’intérieur d’un
triangle sert à avertir l’utilisateur
de la présence d’instructions
d’utilisation et de maintenance
(entretien) importantes dans la
documentation qui accompagne
l’appareil.
Précautions et mises en garde
AVERTISSEMENT: POUR PRÉVENIR TOUT RISQUE
D’INCENDIE OU D’ÉLECTROCUTION, N’EXPOSEZ PAS
CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ.
AVERTISSEMENT: n’installez pas cet appareil dans
un espace con né tel qu’une bibliothèque ou tout
autre meuble similaire.
ATTENTION: nobstruez pas les ouvertures
d’aération. Installez l’appareil conformément aux
instructions du fabricant.
Les fentes et les ouvertures du boîtier servent à
assurer la ventilation et le bon fonctionnement de
l’appareil, ainsi qu’à le protéger contre la surchau e.
Les ouvertures ne doivent jamais être bloquées en
installant l’appareil sur un lit, un canapé, un tapis ou
toute autre surface similaire. Cet appareil ne doit pas
être placé dans un emplacement fermé tel
qu’une bibliothèque ou une étagère, à moins
d’assurer une ventilation adéquate ou que les
instructions du fabricant l’autorisent.
ATTENTION: Ce produit est catégorisé comme un
produit laser de classe 1 selon le règlement IEC
60825-1:2007 sur la sécurité des produits laser.
A n de garantir l’utilisation correcte de cet appareil,
veuillez lire attentivement ce manuel d’utilisation et
conservez-le pour vous y référer ultérieurement.
Si l’appareil nécessite une intervention de
maintenance, contactez un point de service après-
vente agréé.
L’utilisation de commandes, de réglages ou de
procédures autres que ceux décrits dans ce
document peut entraîner une exposition à des
radiations dangereuses.
Pour éviter l’exposition directe au faisceau laser,
nessayez pas d’ouvrir le boîtier. Le rayonnement laser
est visible lorsque l’appareil est ouvert. NE REGARDEZ
PAS DIRECTEMENT LE FAISCEAU.
1
Consignes de sécurité
HB985-DB.BDEUPPK_FRE.indd 2HB985-DB.BDEUPPK_FRE.indd 2 2010-05-14  1:54:142010-05-14  1:54:14
Consignes de sécurité
3Consignes de sécurité
1
PRÉCAUTION concernant le cordon
d’alimentation
Il est recommandé de brancher la plupart des
appareils sur un circuit dédié.
Autrement dit, un circuit comportant une prise de
courant qui alimente uniquement cet appareil et
qui n’a ni autres prises ni circuit dérivé. Reportez-
vous à la page des spéci cations de ce manuel
d’utilisation pour plus de détails. Ne surchargez pas
les prises murales. Les prises murales surchargées,
desserrées ou endommagées, les câbles de rallonge,
les cordons d’alimentation e lochés, ou les gaines
isolantes craquelées ou endommagées constituent
un danger. Chacune de ces conditions peut
entraîner un risque de choc électrique ou dincendie.
Examinez régulièrement le cordon de votre appareil
et, si son aspect indique qu’il est endommagé ou
détérioré, débranchez-le, cessez d’utiliser l’appareil,
et faites remplacer le cordon par une pièce de
rechange appropriée auprès d’un point de service
après-vente agréé. Protégez le cordon d’alimentation
de sorte qu’il ne puisse pas être tordu, entortillé,
pincé, coincé dans une porte ou piétiné. Faites
particulièrement attention aux  ches, aux prises
murales et au point d’où sort le cordon de l’appareil.
Pour déconnecter l’appareil du réseau électrique,
retirez le cordon d’alimentation de la prise électrique.
Lors de l’installation de l’appareil, assurez-vous que la
prise soit facilement accessible.
PIONEER déclare par la présente que
ce ou ces produits sont conformes
aux exigences essentielles et aux
dispositions applicables des directives
2004/108/CE, 2006/95/CE et 2009/125/
CE.
AVERTISSEMENT : pour éviter tout risque d’incendie,
ne posez pas sur l’appareil des sources de  amme
nue (telle qu’une bougie allumée).
Cet appareil est équipé d’une batterie transportable
ou de piles rechargeables.
Retrait sans danger de la batterie ou des piles
de l’appareil: Pour retirer la batterie ou les piles
usagées, procédez dans l’ordre inverse de leur
insertion. Pour empêcher toute contamination de
l’environnement et tout danger pour la santé des
êtres humains et des animaux, la batterie ou les
piles usagées doivent être mises au rebut dans le
conteneur approprié à un point de collecte prévu
pour leur recyclage. Ne jetez pas la batterie ou les
piles usagées avec les autres déchets. Recyclez
toujours les batteries et piles rechargeables usagées.
Les piles ne doivent pas être exposées à une chaleur
excessive comme le soleil, ou le feu.
ATTENTION: l’appareil ne doit pas être exposé à des
projections d’eau ou à des éclaboussures, et aucun
objet rempli de liquide tel qu’un vase ne doit être
posé sur l’appareil.
HB985-DB.BDEUPPK_FRE.indd 3HB985-DB.BDEUPPK_FRE.indd 3 2010-05-14  1:54:172010-05-14  1:54:17
4 Consignes de sécurité
Consignes de sécurité
1
Informations destinées aux utilisateurs sur
la collecte et la mise au rebut des anciens
équipements et piles usagées
Symbol examples
for batteries
Pb
Les symboles qui  gurent sur les produits, emballage
et/ou accompagnant des documents signi ent
que les produits électriques et électroniques et les
piles ne doivent pas être mélangés avec les ordures
ménagères.
Pour un traitement, une récupération et un recyclage
appropriés des produits anciens et piles usagées,
portez-les vers les points de collecte prévus à cet
e et conformément aux législations locales.
En mettant au rebut ces produits et piles
correctement, vous aiderez à sauvegarder des
ressources précieuses et à prévenir tout e et
potentiellement négatif sur la santé humaine et sur
l’environnement qui sinon devraient s’aggraver suite
à une gestion inappropriée des déchets.
Pour plus d’informations sur la collecte et le
recyclage des produits anciens et piles usagées,
contactez votre administration locale, votre service
de gestion des déchets ou les points de vente dans
lesquels vous avez acheté ces articles.
Ces symboles ne sont valables qu’au sein de
l’Union Européenne.
Pour les pays en dehors de l’Union Européenne :
Pour vous débarrasser de ces articles, contactez
les autorités locales ou votre revendeur pour leur
demander quelle méthode de mise au rebut semble
la plus appropriée.
Remarques sur les droits d’auteur
De même que le système CSS (Content Scramble
System) protège le contenu des DVD, le système
AACS (Advanced Access Content System) protège
le contenu des disques Blu-ray ; les contenus
ainsi protégés sont donc soumis à certaines
restrictions en termes de lecture, de sortie de
signal analogique, etc. Le fonctionnement de
cet appareil et les restrictions concernant son
utilisation peuvent varier selon la date de votre
achat, car ces restrictions peuvent être adoptées
et/ou modi ées par la technologie AACS après la
production de cet appareil.
De plus, les technologies BD-ROM Mark et BD+
sont également utilisées en tant que systèmes
de protection du contenu pour le format Blu-
ray, ce qui implique certaines restrictions pour
les contenus protégés par BD-ROM Mark et/
ou BD+, notamment en termes de lecture. Pour
obtenir des informations complémentaires sur
les technologies AACS, BD-ROM Mark et BD+ ou
sur ce produit, contactez un service après-vente
agréé.
De nombreux DVD et BD-ROM sont encodés avec
une protection contre la copie. En conséquence,
vous devez raccorder votre lecteur directement
à votre téléviseur, et non à un magné-toscope.
Le raccordement à un magnétoscope génère
en e et une image déformée pour les disques
protégés contre la copie.
Ce produit est doté d’une technologie de
protection des droits d’auteur protégée par
des brevets américains et d’autres droits sur
la propriété intellectuelle. L’utilisation de cette
technologie de protection des droits d’auteur
doit faire l’objet d’une autorisation par Rovi et est
exclusivement réservée à un usage domestique
et à d’autres types de visionnage limités, sauf
autorisation expresse de Rovi. Les opérations
d’ingénierie inverse et de démontage sont
interdites.
Conformément aux lois sur les droits d’auteur en
vigueur aux États-Unis et dans d’autres pays,
l’enregistrement, l’utilisation, la di usion, la distrib-
ution ou la révision sans autorisation d’émissions
télévisées, de cassettes vidéo, de BD-ROM, de
DVD, de CD et d’autres contenus peut engager
votre responsabilité civile et/ou criminelle.
Exemples de
marquage
pour les batteries
HB985-DB.BDEUPPK_FRE.indd 4HB985-DB.BDEUPPK_FRE.indd 4 2010-05-14  1:54:172010-05-14  1:54:17
Consignes de sécurité
5Consignes de sécurité
1
Avis important concernant le système couleur du
téléviseur
Le système couleur de ce lecteur di ère en fonction
des disques lus.
Par exemple, lorsque le lecteur lit le disque enregistré
dans le système couleur NTSC, l’image est di usée
sous forme de signal NTSC.
Seuls les téléviseurs multisystème peuvent recevoir
l’ensemble des signaux retransmis à partir du lecteur.
Si vous avez un téléviseur PAL et que vous utilisez
des disques ou des contenus vidéo enregistrés en
NTSC, vous verrez des images déformées.
Le téléviseur multisystème change le système
couleur automatiquement en fonction des
signaux d’entrée. Si le système couleur nest pas
modi é automatiquement, éteignez le téléviseur
et rallumez-le pour voir des images normales à
l’écran.
Même si les disques enregistrés dans le système
couleur NTSC s’a chent correctement sur votre
téléviseur, il est possible que leur enregistrement
pose problème dans votre enregistreur.
HB985-DB.BDEUPPK_FRE.indd 5HB985-DB.BDEUPPK_FRE.indd 5 2010-05-14  1:54:172010-05-14  1:54:17
6
Table des matières
1
Consignes de sécurité
2 Précautions et mises en garde
2
Préparation
8 Introduction
8 À propos du symbole
8 Symboles utilisés dans ce
manuel
9 Accessoires fournis
10 Disques pouvant être lus
11 Compatibilité des  chiers
12 Code de région
12 AVCHD (codec vidéo avancé
en haute dé nition)
12 Con gurations systme
spéci ques
12 Remarques sur la
compatibilité
13 Télécommande
14 Panneau avant
15 Panneau arrire
3
Installation
16 Assemblez les enceintes
16 Connexion au haut-parleur
BCS-707
18 Connexion au haut-parleur
BCS-303
19 Montage mural du haut-parleur
central
19 Remarque supplémentaire à propos
du placement des haut-parleurs
20 Positionnement du système
21 Connexion à votre TV
21 Connexion HDMI
22 Connexion vidéo
composantes
23 Connexion vidéo
23 Réglage de la résolution
24 Connexion de l’antenne
24 Connexions avec un équipement
externe
24 Connexion AUX
25 Connexion PORT. IN
(Entrée Port)
25 Connexion OPTICAL IN 1/2
(Entrée optique)
26 Connexion Bluetooth®
28 Raccordement à votre réseau
domestique
29 Paramétrage réseau
31 Raccordement d’un périphérique
USB
32 Réglages
32 Réglage des paramètres
33 Menu [AFFICHAGE]
34 Menu [LANGUE]
35 Menu [AUDIO]
36 Menu [VERROU]
HB985-DB.BDEUPPK_FRE.indd 6HB985-DB.BDEUPPK_FRE.indd 6 2010-05-14  1:54:172010-05-14  1:54:17
7
1
2
3
4
5
6
7
8
37 Menu [RÉSEAU]
37 Menu [AUTRES]
39 E ets sonores
4
Utilisation
40 Lecture générale
42 Lecture avancée
44 A chage à l’écran
48 Utilisation des fonctions BD-LIVE
49 Lecture d’un  chier vidéo et d’un
disque VR
51 Lecture d’un  chier photo
53 Écoute de musique
56 Lecture de l’iPod
58 Utilisation de la fonction Radio
59 Lecture de contenu via votre réseau
domestique
5
Entretien
63 Remarque sur les disques
63 Manipuler le lecteur
6
Dépannage
64 Général
65 Image
65 Son
66 Réseau
7
Annexe
67 Commande d’un téléviseur à l’aide
de la télécommande fournie
68 Liste des codes de région
69 Liste des codes de langue
70 Résolution de la sortie vidéo
71 Marques de commerce et licences
73 Caractéristiques
75 Avis concernant les logiciels open
source
HB985-DB.BDEUPPK_FRE.indd 7HB985-DB.BDEUPPK_FRE.indd 7 2010-05-14  1:54:172010-05-14  1:54:17
8 Préparation
Préparation
2
2
Préparation
Introduction
À propos du symbole
Le symbole peut apparaître sur votre écran
de téléviseur durant le fonctionnement. Il
signi e que la fonction décrite dans ce manuel
nest pas disponible avec ce support spéci que.
Symboles utilisés dans ce
manuel
REMARQUE
Indique des remarques et fonctionnalités
spéciales.
ATTENTION
Indique des précautions à prendre pour éviter
les dommages éventuels dus à une utilisation
inappropriée.
Une section dont le titre comporte l’un des
symboles suivants ne s’applique qu’aux disques
représentés par ce symbole.
BD
Disque BD-ROM
DVD
DVD-Vidéo, DVD±R/RW
en mode vidéo ou VR et
nalisé
AVCHD
DVD±R/RW au format
AVCHD
ACD
CD audio
MOVIE
Fichiers vidéo
MUSIC
Fichiers musique
PHOTO
Fichiers image
HB985-DB.BDEUPPK_FRE.indd 8HB985-DB.BDEUPPK_FRE.indd 8 2010-05-14  1:54:172010-05-14  1:54:17
9Préparation
2
Préparation
Accessoires fournis
Câble vidéo (1) Télécommande (1)
Piles (1) Antenne FM (1)
Sabot iPod (1)
Accessoires du boîtier du haut-
parleur (S-BD707T)
Câble de haut-
parleur (5)
Vis (12)
bases du socle
d’enceinte (4)
Tampons anti-
dérapant – petits (1)
Tampons anti-
dérapant - moyens
(1)
Accessoires du boîtier du haut-
parleur (S-BD707SW)
Câble de haut-
parleur (1)
Tampons anti-
dérapant - grands (1)
Accessoires du boîtier du haut-
parleur (S-BD303)
Câble de haut-
parleur (6)
Tampons anti-
dérapant – petits (1)
Tampons anti-
dérapant - grands (1)
HB985-DB.BDEUPPK_FRE.indd 9HB985-DB.BDEUPPK_FRE.indd 9 2010-05-14  1:54:182010-05-14  1:54:18
10 Préparation
Préparation
2
Disques pouvant être lus
Disques Blu-ray
- Disques tels que des  lms
disponibles à l’achat ou à la
location.
- Disques BD-R/RE contenant
des  chiers vidéo, musicaux ou
photo.
DVD-VIDEO
8 / 12 cm
Disques tels que des  lms
disponibles à l’achat ou à la location.
DVD±R
8 / 12 cm
- Mode vidéo et  nalisé
uniquement.
- Les disques double couche
sont également accept
és.
- Format AVCHD  nalisé.
- Disques DVD±R contenant des
chiers vidéo, musicaux ou photo.
DVD-RW
8 / 12 cm
- Mode VR, mode vidéo et
nalisé uniquement.
- Format AVCHD  nalisé.
- Disques D
VD-RW contenant
des  chiers vidéo, musicaux ou
photo.
DVD+RW
8 / 12 cm
- Mode vidéo et  nalisé
uniquement.
- Format AVCHD.
- F
ormat AVCHD  nalisé.
- Disques DVD+RW contenant
des  chiers vidéo, musicaux ou
photo.
Audio CD
8 / 12 cm
CD-R/RW
8 / 12 cm
- Disques CD-R/RW contenant
des  chiers audio, vidéo,
musicaux ou photo.
REMARQUE
Selon les caractéristiques du matériel
d’enregistrement ou du CD-R/RW
(ou DVD±R/RW) à proprement parler, certains
CD-R/RW (ou DVD±R/RW) peuvent ne pas être
lus par l’appareil.
En fonction du logiciel d’enregistrement et de la
nalisation, il est possible que certains disques
enregistrés (CD-R/RW, DVD±R/RW, BD-R/RE) ne
puissent pas être lus.
Il est possible que les BD-R/RE, DVD±R/RW et
CD-R/RW enregistrés à l’aide d’un ordinateur ou
d’un enregistreur de CD/DVD puissent ne pas
être lus si le disque est endommagé ou sale, ou
si la lentille du lecteur présente de la poussière
ou de la condensation.
Si vous enregistrez un disque à l’aide d’un
ordinateur, même s’il est enregistré dans un
format compatible, il existe une possibilité quil
ne puisse pas être lu à cause des paramètres du
logiciel d’application utilisé pour créer le disque.
(Adressez-vous à l’éditeur du logiciel pour des
informations plus détaillées.)
Pour obtenir une qualité de lecture optimale,
ce lecteur nécessite que les disques et les
enregistrements répondent à certaines normes
techniques.
Les DVD préenregistrés sont automatiquement
conformes à ces normes. Il existe de nombreux
types de formats de disques enregistrables (dont
des disques CD-R contenant des  chiers MP3
ou WMA), et ces formats requièrent certaines
conditions préexistantes pour que la lecture soit
possible.
Veuillez noter qu’il est nécessaire d’avoir une
autorisation pour télécharger des  chiers MP3
ou WMA et de la musique depuis internet. Notre
société n’ayant pas le droit d’accorder une telle
autorisation, cette dernière doit toujours être
recherchée auprès du détenteur des droits
d’auteur.
HB985-DB.BDEUPPK_FRE.indd 10HB985-DB.BDEUPPK_FRE.indd 10 2010-05-14  1:54:182010-05-14  1:54:18
11Préparation
2
Préparation
Compatibilité des  chiers
Généralités
Extension de  chiers disponibles :
.jpg”, “.jpeg”, “.png”, “.avi”, “.divx, “.mpg”, “.mpeg”,
.mkv, “.mp4”, “.mp3”, .wma”, “.wav
Les extensions de  chiers disponibles
varient suivant les ser
veurs DLNA.
Certains  chiers .wav ne sont pas pris en
charge par cet appar
eil.
Les noms des  chiers sont limités à 180
caractères.
Suivant la taille et le nombre de  chiers,
plusieurs minutes peuvent être nécessaires
pour lire les contenus du support.
Nombre maximal de  chiers par dossier:
2 000 (nombre total de  chiers et de dossiers)
Format des CD-R/RW, DVD±R/RW et BD-R/
RE: ISO 9 660+JOLIET, UDF et UDF Bridge
FILM
Taille de résolution disponible:
1 920 x 1 080 pixels (L x H)
Sous-titres compatibles: SubRip (.srt /
.txt), SAMI (.smi), SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub (.sub), SubViewer
1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer
(.txt), DVD Subtitle System (.txt)
Le  ltre VobSub (.sub) nest pas disponible
avec la fonction [Home Link].
Formats codec compatibles: “DIVX3.xx”,
“DIVX4.xx, “DIVX5.xx, “XVID”, “DIVX6.xx (lecture
standard uniquement), H.264/MPEG-4 AVC,
MPEG1 SS, MPEG2 PS, MPEG2 TS
Formats audio compatibles: “Dolby Digital”,
“DTS, “MP3”, “WMA, “AAC, “AC3”
Ce lecteur nest pas entièrement compatible
avec le format audio WMA et AAC.
Fréquence d’échantillonnage:
dans la plage 32 kHz à 48 kHz (WMA),
dans la plage 16 kHz à 48 kHz (MP3),
Débit binaire:
dans la plage 20 kbps à 320 kbps (WMA),
dans la plage 32 kbps à 320 kbps (MP3)
REMARQUE
Les  chiers vidéo haute dé nition contenus
sur un CD ou un périphérique USB 1,0/1,1
risquent de ne pas être lus correctement. Pour
lire des  chiers vidéo haute dé nition, il est
recommandé d’utiliser les formats BD, DVD ou
USB 2,0.
Ce lecteur prend en charge le format H.264/
MPEG-4 AVC pro l Main ou High au niveau 4,1.
Dans le cas d’un  chier de niveau supérieur, un
message d’avertissement s’a chera à l’écran.n.
Ce lecteur ne prend pas en charge les  chiers
enregistrés avec fonction GMC*1 ou Qpel*2.
Il s’agit de techniques d’encodage vidéo du
standard MPEG4, comme celles dont disposent
DivX ou XVID.
*1 GMC – Global Motion Compensation
(compensation globale de mouvements)
*2 Qpel – Quarter pixel (quart de pixel)
MUSIQUE
Fréquence d’échantillonnage:
dans la plage 8 kHz à 48 KHz (WMA),
dans la plage 11 kHz à 48 kHz (MP3)
Débit binaire:
dans la plage 8 kbps à 320 kbps (WMA, MP3),
REMARQUE
Ce lecteur ne prend pas en charge les balises
ID3 intégrées dans les  chiers MP3.
La durée totale de lecture indiquée à l’écran
peut ne pas être correcte pour les  chiers VBR.
PHOTO
Taille recommandée:
Inférieure à 4 000 x 3 000 x 24 bits/pixel
Inférieure à 3 000 x 3 000 x 32 bits/pixel
Inférieure à 4 MByte/ le
Les  chiers d’image photo progressifs et à
compression sans perte ne sont pas pris en
charge.
HB985-DB.BDEUPPK_FRE.indd 11HB985-DB.BDEUPPK_FRE.indd 11 2010-05-14  1:54:192010-05-14  1:54:19
12 Préparation
Préparation
2
Code de région
Un code de région est indiqué à l’arrière de
l’appareil. Ce dernier ne peut lire que les
disques DVD ou BD-ROM de la même zone ou
portant la mention ALL (Toutes zones).
AVCHD (codec vidéo avancé en
haute dé nition)
Ce lecteur peut lire les disques au format
AVCHD. Ces disques sont normalement
enregistrés et utilisés dans les caméscopes.
Le format AVCHD est un format
d’enregistrement numérique de vidéo
haute dé nition.
Le format MPEG-4 AVC/H.264 peut
compresser les images avec une plus
grande e cacité que le format de
compression d’image conventionnel.
Certains disques AVCHD utilisent le format
“x.v.Colour.
Ce lecteur peut lire les disques AVCHD au
format “x.v.Colour.
Selon leurs conditions d’enregistrement, il
est possible que certains disques au format
AVCHD ne puissent pas être lus.
Les disques au format AVCHD doivent être
nalisés.
Le format “x.v.Colour o re une palette de
couleurs plus vaste que les disques pour
caméscope DVD normaux.
Con gurations systme
spéci ques
Pour la lecture vidéo haute dé nition:
Téléviseur haute dé nition doté de prises
d’entrée COMPOSANTES ou HDMI.
BD-ROM avec du contenu haute dé nition.
Une entrée HDMI ou DVI compatible HDCP
est nécessaire sur votre téléviseur pour
certains contenus (indiqués par les auteurs
du disque).
Pour l’extrapolation des DVD de dé nition
standard, une entrée HDMI ou DVI
compatible HDCP est nécessaire sur votre
téléviseur a n d’accéder aux contenus
protégés contre la copie.
Remarques sur la compatibilité
Comme les disques BD-ROM sont un
nouveau format, certains problèmes avec
les disques, la connexion numérique ou
d’autres problèmes de compatibilité sont
possibles. Si vous rencontrez des problèmes
de compatibilité, contactez un point de
service après-vente agréé.
Pour visionner un contenu haute dé nition
et extrapoler un contenu DVD de dé nition
standard, il peut être nécessaire d’avoir une
entrée HDMI ou une entrée DVI compatible
HDCP sur votre téléviseur.
Certains DVD et BD-ROM peuvent limiter
l’utilisation de certaines fonctionnalités ou
commandes.
Vous pouvez utiliser un périphérique USB
qui sert à stocker des informations liées au
disque, notamment les contenus en ligne
téléchargés. Le disque que vous utilisez
déterminera la durée de conservation de
ces informations.
HB985-DB.BDEUPPK_FRE.indd 12HB985-DB.BDEUPPK_FRE.indd 12 2010-05-14  1:54:192010-05-14  1:54:19
13Préparation
2
Préparation
Télécommande
1
2
3
• • • • • • • • •
a
• • • • • • • • •
1
(STANDBY/ON): permet
d’allumer ou d’éteindre le lecteur.
Z
OPEN/CLOSE: permet
d’ouvrir ou de fermer le plateau du
disque.
INPUT/TUNER: permet de
modi er la source d’entrée.
BT AUDIO: Change le mode
d’entrée pour BT AUDIO
directement.
OPTICAL: Passe automatiquement
en mode d’entrée optique.
DISPLAY: permet
d’activer ou de désactiver
l’a chage à lécran.
HOME MENU: permet
d’a cher ou de quitter le [Menu
d’accueil].
MENU: permet d’accéder au menu
du disque.
Touches  échées: per
mett
ent de
sélectionner une option dans le
menu.
ENTER: permet de con rmer la
sélection du menu.
TUNE (+/-): Réglage de la station
de radio de votre choix.
PRESET: Sélections programmées
des radios.
• • • • • • • • •
b
• • • • • • • • •
O
RETURN: permet de quitter le
menu ou de reprendre la lecture.
POPUP/ TOP MENU: permet
d’a cher le menu de titres du DVD
ou le menu contextuel du BD-
ROM, s’il est disponible.
x
STOP: permet d’arrêter la
lecture.
B
PLAY: permet de démarrer la
lecture.
X
PAUSE/STEP: permet de mettre
la lecture en pause.
.
/
>
SKIP: Permet de passer
à la piste, au  chier ou au chapitre
précédent/suivant.
m
/
M
SCAN: permet
d’e ectuer une recherche vers
l’arrière ou l’avant.
SPK LEVEL: Règle le volume
sonore du haut-parleur souhaité.
z
USB REC: enregistre un CD
audio.
MUTE: Passer en mode muet.
SOUND: Sélectionne un mode
d’e et sonore.
VOL +/- : Ajustez le volume des
haut-parleurs.
• • • • • • • • •
c
• • • • • • • • •
Touches numériques 0-9:
permettent de sélectionner les
options numérotées dans un
menu.
MARKER: Marque n’importe quel
passage lors de la lecture.
SEARCH: A che ou ferme le menu
de recherche.
REPEAT: permet de répéter une
section de votre choix.
CLEAR: permet d’e acer un index
dans le menu de recherche ou un
numéro lors de la dé nition du
mot de passe.
DIMMER: Pour réduire la luminosité
de l’a chage de l’appareil.
ZOOM: Accède au menu du zoom.
Touches de couleurs
(A, B, C, D): Utilisées pour naviguer
sur les menus.
- Bouton A (RDS): permet
d’activer la fonction RDS (Radio
Data System).
- Bouton B (PTY): visualise le type
de programme du RDS.
- Bouton C (PTY SEARCH):
Recherche un type de programme.
- Bouton D: Sélectionne mono/
stéréo en mode FM.
Touches de contrôle TV: Voir page
67.
SLEEP: Fixe un certain laps de
temps après lequel l’appareil
s’éteint.
Insertion des piles
Retirez le couvercle des piles
au dos de la télécommande,
et insérez une pile R03 (taille
AAA), en respectant les
polarités et .
HB985-DB.BDEUPPK_FRE.indd 13HB985-DB.BDEUPPK_FRE.indd 13 2010-05-14  1:54:192010-05-14  1:54:19
14 Préparation
Préparation
2
Panneau avant
a
Plateau de disque
b
Touches de fonctionnement
1
STANDBY/ON Touche
Z
(OPEN/CLOSE)
FONCTION
Change la source d’entrée ou la fonction.
B
/
X
(PLAY / PAUSE)
x
(STOP)
.
/
>
(SKIP)
- TUNE + (Réglage de station de radio)
c
Capteur de la télécommande
d
Fenêtre d’a chage
e
PORTABLE IN
f
Port USB
g
Réglage du volume
1
2
3 4 5 6 7
HB985-DB.BDEUPPK_FRE.indd 14HB985-DB.BDEUPPK_FRE.indd 14 2010-05-14  1:54:192010-05-14  1:54:19
15Préparation
2
Préparation
a
Cordon d’alimentation
Branchez sur le secteur.
b
Connecteurs haut-parleurs
c
Ventilateur
d
Connecteur Antenne
e
VIDEO OUT
f
AUX (L/R) INPUT
g
COMPONENT VIDEO (Y PB PR)
OUTPUT (PROGRESSIVE SCAN)
h
OPTICAL IN 1(TV) / 2
i
iPod (24 broches)
Raccordement au sabot iPod fourni.
j
HDMI OUT (type A, version 1.3)
Entrées HDMI pour connexion TV.
k
Port LAN
Panneau arrire
1 2 3 4 5
6 7 8 9 10 11
HB985-DB.BDEUPPK_FRE.indd 15HB985-DB.BDEUPPK_FRE.indd 15 2010-05-14  1:54:192010-05-14  1:54:19
16 Installation
Installation
3
Assemblez les
enceintes
Connexion au haut-parleur
BCS-707
Préparation des haut-parleurs
1. Fixez les tampons anti-dérapage à la base
des socles de chaque haut-parleur, du
caisson de basse et du haut-parleur central.
Utilisez l’adhésif fourni pour  xer les quatre
tampons moyens à la base (en bas) de
chacun des socles de haut-parleur.
middle non-skid pads
Tampons anti-dérapant - moyens
Pour le caisson de basse :
Utilisez l’adhésif fourni pour  xer quatre
grands tampons à la base du caisson de
basse.
large non-skid pads
Tampons anti-dérapant - grands
Pour le haut-parleur central :
Utilisez l’adhésif fourni pour  xer quatre
petits tampons à la base du haut-parleur
central.
small non-skid pads
Tampons anti-
dérapant - petits
2. Fixez les socles des haut-parleurs aux tiges
en utilisant les vis fournies.
Dès que vous avez aligné la tige et la base
du socle,  xez avec les petites vis aux points
indiquées ci-dessous. Notez que le haut-
parleur doit être face en direction de la base
d’un triangle isocèle.
Rear
Front
Arrière
Avant
3
Installation
HB985-DB.BDEUPPK_FRE.indd 16HB985-DB.BDEUPPK_FRE.indd 16 2010-05-14  1:54:202010-05-14  1:54:20
17Installation
3
Installation
3. Branchez les  ls sur le lecteur.
Branchez le  l blanc avec la ligne grise sur
le côté (+) et l’autre sur le côté (–). Pour
raccorder le  l d’enceinte sur le lecteur,
appuyez sur chaque onglet en plastique
pour ouvrir la borne de connexion. Insérez
chaque  l dans la borne appropriée, puis
relâcher l’onglet.
couleur (+)
Noir (–)
ATTENTION
Ne branchez pas d’autres haut-parleurs que
ceux fournis avec de système.
Ne branchez pas les haut-parleurs fournis sur
aucun autre ampli cateur que celui fourni
avec ce système. Toute connexion sur un
autre ampli cateur peut se traduire par un
dysfonctionnement ou un incendie.
Fixez vos haut-parleurs avant et
enceintes satellites
Fixez chaque haut-parleur avant et enceinte
satellite avec les taquets en plastique fournis.
Vissez sur crochets de support dans le mur
situé derrière le haut-parleur. Passez un cordon
épais autour des crochets et par le taquet
en plastique a n de stabiliser le haut-parleur
(véri ez bien que tout le dispositif est en
mesure de supporter le poids du haut-parleur).
Après l’installation, véri ez que le haut-parleur
est bien  xé.
thick cord
Plastic catch
Cordon
su samment épais
Taquet en plastique
ATTENTION
Le taquet en plastique nest pas une  xation
de montage et le haut-parleur ne doit pas être
directement accroché au mur avec ce taquet.
Utilisez toujours un cordon pour la stabilisation
du haut-parleur.
Pioneer décline toute responsabilité en cas de
perte ou de dommages dus à un assemblage
et une installation incorrecte, à l’utilisation
de matériaux d’installation insu samment
robustes, à une mauvaise utilisation ou à des
catastrophes naturelles.
Lors du placement de cet appareil, veillez à ce
qu’il soit installé de telle sorte qu’il ne risque
pas de tomber ni de causer des blessures
dans l’éventualité d’une catastrophe naturelle
(comme un tremblement de terre).
HB985-DB.BDEUPPK_FRE.indd 17HB985-DB.BDEUPPK_FRE.indd 17 2010-05-14  1:54:202010-05-14  1:54:20
18 Installation
Installation
3
Connexion au haut-parleur
BCS-303
Préparation des haut-parleurs
1. Fixez les tampons anti-dérapage à la base
de chaque haut-parleur.
Pour les haut-parleurs avant et enceintes
satellites :
Utilisez l’adhésif fourni pour  xer les quatre
petits tampons à la base (en bas) de chacun
des socles de haut-parleurs.
samll non-skid pads
Tampons anti-dérapant –
petits
Pour le caisson de basse :
Utilisez l’adhésif fourni pour  xer quatre
grands tampons à la base du caisson de
basse.
large non-skid pads
Tampons anti-dérapant –
grands
Pour le haut-parleur central :
Utilisez l’adhésif fourni pour  xer quatre
petits tampons à la base du haut-parleur
central.
samll non-skid pads
Tampons anti-dérapant
– petits
2. Branchez les  ls sur le lecteur.
Branchez le  l blanc avec la ligne grise sur
le côté (+) et l’autre sur le côté (–). Pour
raccorder le  l d’enceinte sur le lecteur,
appuyez sur chaque onglet en plastique
pour ouvrir la borne de connexion. Insérez
chaque  l dans la borne appropriée, puis
relâcher l’onglet.
couleur (+)
Noir (–)
HB985-DB.BDEUPPK_FRE.indd 18HB985-DB.BDEUPPK_FRE.indd 18 2010-05-14  1:54:202010-05-14  1:54:20
19Installation
3
Installation
Montage mural du
haut-parleur central
Le haut-parleur central dispose d’un trou de
montage qui permet de  xer le haut-parleur au
mur.
Avant le montage
Rappelez-vous que le système de haut-parleurs
est lourd et que son poids pourrait fragiliser la
xation des vis au mur, ou que le matériau du
mur pourrait ne pas résister au poids du haut-
parleur qui risquerait de tomber. Véri ez que
le mur sur lequel vous prévoyez de monter les
haut-parleurs est su samment robuste pour
supporter le poids du haut parleur. N’e ectuez
pas de montage sur du contre-plaqué ou des
cloisons à surface fragile.
Les vis de montage ne sont pas fournies.
Utilisez des vis appropriées au matériau du
mur et capable de supporter le poids des haut-
parleurs.
ATTENTION
Si vous nêtes pas sûr de la qualité et de la
robustesse de la cloison, demandez conseil à un
professionnel.
Pioneer ne peut pas être tenu pour responsable
d’accidents ou de dommage dus à une
installation incorrecte.
5 mm
10 mm
Mounting screw
(not supplied)
Vis de montage
(non fournies)
Remarque
supplémentaire à
propos du placement
des haut-parleurs
Installez les haut-parleurs principaux avant
gauche et droit à égale distance de votre
téléviseur.
Précautions :
Veillez à bien torsader ensemble tous les
ls nus des haut-parleurs et de les insérer
complètement dans la borne du haut-parleur
Si un des  ls nus de haut-parleur touche le
panneau arrière, cela peut provoquer une
coupure de l’alimentation à titre de mesure de
sécurité..
Les haut-parleurs avant, central et enceintes
satellites fournis avec ce système sont
blindés magnétiquement. Toutefois, selon
l’emplacement de l’installation, une distorsion
des couleurs peut apparaître sur l’écran de
votre téléviseur si vous avez installé le haut-
parleur vraiment trop près de celui-ci. Si c’est
le cas, éteignez votre téléviseur, puis allumez-
le après avoir patienté entre 15 et 30 minutes.
Si le problème persiste, éloignez le système de
haut-parleurs de votre téléviseur.
Le caisson de basse nest pas blindé
magnétiquement et ne doit donc pas
être placé à proximité d’un téléviseur ou
d’un moniteur. Les supports de stockage
magnétiques (comme des disquettes, les
bandes et cassettes vidéo) ne doivent pas être
rangés à proximité du caisson de basse.
Ne  xez pas les haut-parleurs avant/enceintes
satellites et le caisson de basse à un mur ou
au plafond. Ils peuvent tomber et causer des
blessures.
De 5 mm à 7 mm
HB985-DB.BDEUPPK_FRE.indd 19HB985-DB.BDEUPPK_FRE.indd 19 2010-05-14  1:54:212010-05-14  1:54:21
20 Installation
Installation
3
Positionnement du système
Lillustration suivante montre comment
positionner le système (exemple). Notez que
les illustrations de ces instructions sont à titre
explicatives et peuvent parfois di érer de votre
Home Cinema.
Pour un meilleur son surround possible, tous
les haut-parleurs autres que le subwoofer
doivent être placés à égale distance de la
position d’écoute (
A
).
A
B
D
E
F
A
A
A
A
A
G
C
A
Haut-parleur avant gauche (L)/
B
Haut-parleur avant droit (R):
Placez les haut-parleurs avant sur les côtés de
l’écran ou du moniteur et si possible à la même
hauteur.
C
Haut-parleur central:
Placez le haut-parleur central au dessus ou en
dessous de l’écran ou du moniteur.
D
Haut-parleur surround gauche (L)/
E
Haut-parleur surround droit (R):
Placez ces haut-parleurs derrière votre position
d’écoute, légèrement tournés vers l’intérieur.
F
Subwoofer:
La position du subwoofer nest pas cruciale car
les extrêmes graves sont non-directionnels.
Mais il est préférable de placer le subwoofer
près des haut-parleurs avant. Tournez-le
légèrement vers le centre de la pièce pour
réduire les ré exions sur les murs.
G
Ampli
ATTENTION
Veillez à ce que les enfants ne mettent pas les
mains ou tout autre objet dans le canal du haut-
parleur.
*Canal du haut parleur pour l’excitation aéro-
acoustique : basses abondantes sur un haut-
parleur acoustique.
Placez l’enceinte centrale hors d’atteinte des
enfants.
Sinon, l’enceinte pourrait être endommagée et/
ou provoquer des dommages matériels et/ou
des blessures.
Les enceintes contenant des pièces
magnétiques, il est possible que des irrégularités
de couleurs apparaissent sur l’écran du téléviseur
ou du moniteur d’ordinateur.
Utilisez les enceintes à une distance éloignée de
votre téléviseur ou écran d’ordinateur.
HB985-DB.BDEUPPK_FRE.indd 20HB985-DB.BDEUPPK_FRE.indd 20 2010-05-14  1:54:212010-05-14  1:54:21
21Installation
3
Installation
Connexion à votre TV
E ectuez la ou les connexions suivantes en
fonction des capacités de vos appareils à
connecter à l’ampli.
Connexion HDMI (voir pages 21-22)
Connexion vidéo composantes (page 22)
Connexion vidéo (page 23)
REMARQUE
Il existe plusieurs façons de connecter le lecteur
en fonction de votre TV et des autres appareils
que vous souhaitez connecter. Choisissez l’une
des connexions présentées dans le manuel.
Veuillez vous référez aux manuels de votre TV,
chaîne hi- ou autres dispositifs nécessaires pour
e ectuer les connexions correctement.
Assurez-vous que le lecteur est branché
directement à votre TV. Réglez la TV sur le canal
d’entrée vidéo.
Ne branchez pas votre lecteur via votre
magnétoscope. Limage pourrait être déformée
par le système de protection contre la copie.
Connexion HDMI
Si vous possédez un moniteur ou un téléviseur
HDMI, vous pouvez le raccorder à ce lecteur à
l’aide d’un câble HDMI (type A, version 1.3).
Raccordez la prise de sortie HDMI OUT de
l’appareil à la prise d’entrée HDMI IN d’un
téléviseur ou d’un moniteur compatible HDMI.
Connexion HDMI
Player
TV
TV
Lecteur
Réglez la source du téléviseur sur HDMI
(reportez-vous au manuel d’utilisation de votre
téléviseur).
HB985-DB.BDEUPPK_FRE.indd 21HB985-DB.BDEUPPK_FRE.indd 21 2010-05-14  1:54:212010-05-14  1:54:21
22 Installation
Installation
3
REMARQUE
Une modi cation de la résolution alors que la
connexion est déjà établie peut entraîner des
dysfonctionnements. Pour résoudre le problème,
éteignez le lecteur puis rallumez-le.
Lorsque la connexion HDMI avec HDCP nest
pas véri ée, le téléviseur a che un écran noir.
Dans ce cas, véri ez la connexion HDMI ou
débranchez le câble HDMI.
Si des interférences apparaissent à l’écran,
véri ez le câble HDMI (la longueur du câble ne
doit généralement pas dépasser 4,5 m et vous
devez utiliser un câble HDMI haut-débit
(version 1.3).
Si un périphérique HDMI raccordé n’accepte pas
la sortie audio du lecteur, le son du périphérique
HDMI peut être déformé ou muet.
Lorsque vous utilisez la connexion HDMI, vous
pouvez modi er la résolution pour la sortie
HDMI. (Reportez-vous à la section “Réglage de la
résolution, page 23.)
Sélectionnez le type de sortie vidéo pour la prise
de sortie HDMI OUT à l’aide de l’option [Rég.
couleur HDMI] dans le menu [Con g.]
(voir page 34).
Lorsque vous raccordez un appareil compatible
HDMI ou DVI, e ectuez les véri cations
suivantes:
- Essayez d’éteindre l’appareil HDMI/DVI ainsi
que ce lecteur. Ensuite, allumez
l’appareil HDMI/DVI, attendez environ 30
secondes, puis allumez ce lecteur.
- Lentrée vidéo de l’appareil raccordé est
correctement réglée pour cet appareil.
- L’appareil raccordé est compatible avec les
résolutions d’entrée vidéo 720 x 576p (480p),
1280 x 720p, 1920 x 1080i et 1920 x 1080p.
Certains appareils DVI ou HDMI compatibles
HDCP ne fonctionneront pas avec ce lecteur.
- Limage ne s’a chera pas correctement avec
un appareil non HDCP.
- Ce lecteur ne peut pas e ectuer la lecture et le
téléviseur a che un écran noir.
Connexion vidéo composantes
Raccordez les prises COMPONENT VIDEO OUT
de l’appareil avec les prises correspondantes
du téléviseur, à l’aide de câbles Y Pb Pr.
Vous pouvez entendre le son sortir des
enceintes du système.
Connexion en composantes
Player
TV
Green
Blue
Red
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Lecteur
Vert
Bleu
Rouge
TV
REMARQUE
Lorsque vous utilisez la sortie vidéo composantes
COMPONENT VIDEO OUT, vous pouvez modi er
la résolution pour la sortie. (Reportez-vous à la
section “Réglage de la résolution, voir page 23.)
HB985-DB.BDEUPPK_FRE.indd 22HB985-DB.BDEUPPK_FRE.indd 22 2010-05-14  1:54:222010-05-14  1:54:22
23Installation
3
Installation
Connexion vidéo
Raccordez la prise de sortie vidéo VIDEO
OUT du lecteur à la prise d’entrée vidéo du
téléviseur à l’aide d’un câble vidéo.
Vous pouvez entendre le son sortir des
enceintes du système.
Connexion vidéo
TV
Yellow
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Lecteur
TV
Jaune
Réglage de la résolution
Le lecteur o re plusieurs résolutions de
sortie pour les prises de sortie HDMI OUT
et COMPONENT VIDEO OUT. Vous pouvez
modi er la résolution à l’aide du menu
[Con g.].
1. Appuyez sur la touche HOME MENU (
).
2. Utilisez les touches
I
/
i/U
/
u
pour
sélectionner [Con g.], puis appuyez sur
ENTER (
). Le menu [Con g.] apparaît.
3. Utilisez les touches
U
/
u
pour sélectionner
l’option [AFFICHAGE], puis appuyez sur
i
pour accéder au deuxième niveau.
4. Utilisez les touches
U
/
u
pour sélectionner
l’option [Résolution] puis appuyez sur
ENTER (
) ou
i
pour accéder au troisième
niveau de menu.
5. Utilisez les touches
U
/
u
pour sélectionner
la résolution souhaitée, puis appuyez sur
la touche ENTER ( ) pour con rmer votre
choix.
REMARQUE
Si votre téléviseur n’accepte pas la résolution
que vous avez dé nie sur le lecteur, vous pouvez
régler la résolution sur 576p (480p) comme suit:
1. Appuyez sur
Z
pour ouvrir le tiroir à disque.
2. Appuyez sur la touche
x
pendant au moins
5 secondes.
Comme plusieurs facteurs a ectent la résolution
de sortie vidéo, reportez-vous à la section
“Résolution de la sortie vidéo”, page 70.
HB985-DB.BDEUPPK_FRE.indd 23HB985-DB.BDEUPPK_FRE.indd 23 2010-05-14  1:54:222010-05-14  1:54:22
24 Installation
Installation
3
Connexion de
l’antenne
Branchez l’antenne fournie pour écouter la
radio.
Connexion de l’antenne
Player
Lecteur
REMARQUE
Après avoir connecté l’antenne  laire FM,
positionnez-la à l’horizontal autant que possible.
Veillez à étendre complètement l’antenne  laire
FM.
Connexions avec un
équipement externe
Connexion AUX
Vous pouvez écouter la musique de votre
appareil avec les prises de sortie analogique
audio des haut-parleurs du système.
Branchez le câble de sortie analogique audio
de votre appareil aux entrées L/R (INPUT)
de l’ampli. Puis sélectionnez l’option AUX en
appuyant sur les touches INPUT/TUNER,
I
/
i
et ENTER (
).
Connexion AUX
Player
To the audio output jacks
of your component
(TV, VCR, etc.)
Red
White
PR
PB
Y
COMPONENT
VIDEO
INPUT
L
AUX
R
VIDEO
Rouge
Blanc
Lecteur
Vers la sortie audio de
votre appareil
(TV, VCR, etc.)
HB985-DB.BDEUPPK_FRE.indd 24HB985-DB.BDEUPPK_FRE.indd 24 2010-05-14  1:54:232010-05-14  1:54:23
25Installation
3
Installation
Connexion PORT. IN
(Entrée Port)
Vous pouvez écouter la musique de votre
lecteur audio portable sur les haut-parleurs du
système.
Branchez le casque (ou la sortie de ligne) de
votre lecteur audio portable au PORTABLE
IN de l’ampli. Puis sélectionnez l’option
[PORTABLE] en appuyant sur les touches
INPUT/TUNER,
I
/
i
et ENTER (
).
Connexion PORT.IN
twZGSGUUU
Lecteur MP3, etc.
Connexion OPTICAL IN 1/2
(Entrée optique)
Vous pouvez écouter la musique de votre
appareil avec la connexion numérique optique
depuis les haut-parleurs du système.
Connectez la prise de sortie optique de votre
appareil dans la prise OPTICAL IN 1/2 de
l’ampli. Puis sélectionnez l’option [OPTICAL 1/2]
en appuyant sur les touches INPUT/TUNER,
I
/
i
et ENTER (
). Ou appuyez directement
sur OPTICAL.
Connexion optique
To the digital
optical output jack
of your component
Vers la prise de sortie
numérique optique
de votre appareil
HB985-DB.BDEUPPK_FRE.indd 25HB985-DB.BDEUPPK_FRE.indd 25 2010-05-14  1:54:232010-05-14  1:54:23
26 Installation
Installation
3
Connexion Bluetooth®
À propos de Bluetooth
Bluetooth® est une technologie de
communication sans  l dédiée à des
connexions à courte distance.
La portée accessible est inférieure à 10 mètres.
(Le son peut être interrompu si la connexion
interfère avec d’autres ondes électroniques
ou si vous connectez votre dispositif bluetooth
dans d’autres pièces.)
La connexion de périphériques individuels en
employant la technologie sans  l Bluetooth
nentraîne aucune charge supplémentaire.
Vous pouvez faire fonctionner un téléphone
mobile équipé de la technologie sans  l
Bluetooth via la Cascade si la connexion a été
réalisée au moyen de la technologie sans  l
Bluetooth.
Équipements pris en charge : téléphone
mobile, MP3, ordinateur portable, assistant
numérique personnel (PDA) (ces appareils
acceptent les écouteurs stéréo).
Pro ls Bluetooth
Pour utiliser la technologie sans  l, les appareils
doivent être capables d’interpréter certain
pro ls.
Cet appareil est compatible avec le pro l
suivant.
A2DP (Advanced Audio Distribution Pro le -
pro l de distribution audio avancée)
Écoute de morceaux de musique d’un
équipement Bluetooth
Appariement de votre appareil avec
l’équipement Bluetooth
Avant de démarrer la procédure d’appariement,
véri ez que la fonction Bluetooth est activée
sur votre équipement Bluetooth. Pour plus
d’informations, reportez-vous au mode
d’emploi de votre équipement Bluetooth.
Une fois l’appariement réalisé, il ne sera plus
nécessaire de l’e ectuer à l’avenir.
1. Sélectionnez la fonction Bluetooth à l’aide
de la touche INPUT/TUNER ou BT AUDIO.
“BT AUDIO”, puis “BT READY” apparaissent
sur la fenêtre d’a chage.
2. Faites fonctionner l’équipement Bluetooth
et exécutez la procédure d’appariement.
En e ectuant la recherche de cet appareil
avec l’équipement Bluetooth, selon le
type d’équipement Bluetooth, la liste des
équipements trouvés peut apparaître sur
l’a chage de l’équipement Bluetooth .
Votre appareil apparaît sous l’appellation
“PIONEER AUDIO”.
3. Entrez le code PIN.
Code PIN : 0000
4. Lorsque cet appareil est correctement
apparié avec votre équipement Bluetooth, la
LED Bluetooth de cet appareil s’allume et “BT
SINK” apparaît.
REMARQUE
Selon le type de votre équipement Bluetooth,
certains appareils peuvent avoir des méthodes
d’appariement di érentes.
5. Écoute de morceaux de musique.
Pour écouter de la musique enregistrée sur
votre équipement Bluetooth, reportez-vous
au mode d’emploi de votre équipement
Bluetooth.
REMARQUE
Si vous changez le fonctionnement de l’appareil,
la fonction Bluetooth est déconnectée, vous
devez alors refaire l’appariement.
AVRCP n’est pas accessible dans ce mode.
HB985-DB.BDEUPPK_FRE.indd 26HB985-DB.BDEUPPK_FRE.indd 26 2010-05-14  1:54:242010-05-14  1:54:24
27Installation
3
Installation
Véri cation des informations de
l’équipement Bluetooth connecté
Cette fonction est disponible après
l’appariement. Vous pouvez contrôler les
informations Bluetooth.
Appuyez sur DISPLAY en maintenant la touche
enfoncée plusieurs fois.
Les informations Bluetooth sont modi ées
comme suit.
Adresse de l’équipement Bluetooth local
t
Nom de l’équipement
t
Aucun
t
...
REMARQUE
Cet appareil ne reconnaît pas le pro l écouteur
mono (pro l mains libres).
Le son peut être interrompu si la connexion
interfère avec d’autres ondes électroniques.
Vous ne pouvez pas commander l’équipement
Bluetooth avec cet appareil.
L’appariement est limité à un équipement
Bluetooth pour un appareil et le multi
appariement n’est pas possible.
Bien que la distance entre votre équipement
Bluetooth et l’appareil soit inférieure à 10
m, s’il y a des obstacles entre ces éléments,
votre équipement Bluetooth peut ne pas être
connecté.
Selon le type d’équipement, vous pourriez
ne pas être en mesure d’utiliser la fonction
Bluetooth.
Sans connexion à Bluetooth active, “BT READY”
apparaît sur la fenêtre d’a chage.
En cas de dysfonctionnement électrique dû
à des appareils utilisant la même fréquence
comme des équipements médicaux, des micro-
ondes ou des périphériques LAN sans  l, la
connexion est perdue.
Si quelqu’un se place entre l’équipement
Bluetooth et le lecteur, et ainsi interrompt la
communication, la connexion est perdue.
Lécartement de la distance séparant
l’équipement Bluetooth de l’appareil peut
conduire à une diminution du son ; une
connexion trop faible peut entraîner une
déconnexion si l’espace entre l’équipement
Bluetooth et l’appareil est hors plage de
fonctionnement de l’équipement Bluetooth.
Vous déconnectez l’équipement doté de
la technologie sans  l Bluetooth lorsque
vous éteignez l’appareil principal ou placez
l’équipement à une distance supérieure à 10
mètres de l’appareil principal.
HB985-DB.BDEUPPK_FRE.indd 27HB985-DB.BDEUPPK_FRE.indd 27 2010-05-14  1:54:242010-05-14  1:54:24
28 Installation
Installation
3
Raccordement à votre
réseau domestique
Cet appareil peut être connecté à un réseau
local (LAN) via la prise LAN située à l’arrière de
l’appareil.
Reportez-vous à la documentation relative
à votre périphérique réseau pour plus
d’informations. Raccordez le port LAN du
lecteur au port correspondant de votre
modem ou routeur à l’aide d’un câble LAN ou
Ethernet en vente dans le commerce (CAT5 ou,
de préférence, connecteur RJ45).
Dans l’exemple de con guration d’une
connexion câblée ci-dessous, ce lecteur peut
accéder au contenu de chaque ordinateur.
Connexion à un réseau  laire
Broadband
Service
Router
WAN
LAN 1
LAN 2
LAN 3
Player
PC
PC
Routeur
Service haut
débit
Lecteur
REMARQUE
Maintenez fermement la  che lorsque vous
branchez ou débranchez le câble LAN. Au
moment de débrancher, ne tirez pas sur le câble
LAN mais débranchez-le tout en appuyant sur la
languette.
Ne raccordez pas un câble de téléphone
modulaire au port LAN.
Comme il existe di érentes con gurations de
raccordement, suivez les spéci cations de votre
opérateur de télécommunications ou de votre
prestataire de services internet.
Le lecteur envoie un signal audio depuis les
entrées HDMI à la fois vers la sortie HDMI et les
enceintes de l’appareil.
HB985-DB.BDEUPPK_FRE.indd 28HB985-DB.BDEUPPK_FRE.indd 28 2010-05-14  1:54:242010-05-14  1:54:24
29Installation
3
Installation
Paramétrage réseau
Avant de paramétrer le réseau câblé, vous
devez relier votre réseau domestique à internet
en haut débit.
S’il existe un serveur DHCP sur le réseau local
via une connexion câblée, ce lecteur se verra
attribuer automatiquement une adresse IP.
Une fois le raccordement physique e ectué,
certains réseaux domestiques nécessitent
de régler les paramètres réseau du lecteur.
Paramétrez l’option [RÉSEAU] comme suit.
1. Sélectionnez l’option [Con g. connexion]
dans le menu [Con g.] , puis appuyez sur la
touche ENTER (
).
2. Utilisez les touches
U
/
u
/
I
/
i
pour
sélectionner le mode IP [Dynamique] ou
[Statique].
Généralement, sélectionnez [Dynamique]
pour attribuer automatiquement une
adresse IP.
REMARQUE
S’il n’existe pas de serveur DHCP sur le réseau et
que vous voulez dé nir l’adresse IP manuellement,
sélectionnez [Statique], puis réglez les options
[Adresse IP], [Masque sous-réseau], [Passerelle] et
[Serveur DNS] à l’aide des touches
U
/
u
/
I
/
i
et
des touches numériques. Si vous vous trompez en
saisissant les chi res, appuyez sur la touche CLEAR
pour e acer la partie en surbrillance.
3. Sélectionnez [OK] et appuyez sur ENTER
( ) pour appliquer les paramètres réseau.
4. Le lecteur vous demandera de tester la
connexion réseau. Sélectionnez [OK] et
appuyez sur la touche ENTER ( ) pour
terminer la connexion réseau.
5. Si vous sélectionnez [Test] et appuyez sur
la touche ENTER ( ) à l’étape 4 ci-dessus,
le statut de la connexion réseau apparaît à
l’écran.
Vous pouvez aussi le tester via l’option
[Statut connexion] du menu [Con g.].
HB985-DB.BDEUPPK_FRE.indd 29HB985-DB.BDEUPPK_FRE.indd 29 2010-05-14  1:54:242010-05-14  1:54:24
30 Installation
Installation
3
Remarques sur la connexion réseau:
Pour ce faire, après avoir raccordé le
lecteur au réseau domestique, éteignez
et/ou débranchez rapidement le câble
d’alimentation du routeur ou du modem
câblé du réseau domestique. Ensuite,
rallumez l’appareil et/ou rebranchez le
cordon d’alimentation.
Selon le prestataire de services internet
(ISP), le nombre d’appareils pouvant
recevoir le service internet peut être limité
par les modalités de service applicables.
Pour plus de détails, contactez votre ISP.
Notre entreprise décline toute
responsabilité en cas de dysfonctionnement
du lecteur et/ou de la fonctionnalité de
connexion à internet suite à des erreurs ou
problèmes de communication associés à
votre connexion internet haut débit ou à
tout autre équipement raccordé.
Les caractéristiques des disques BD-
ROM accessibles via la fonctionnalité de
connexion à internet ne sont ni créées
ni fournies par notre entreprise, aussi
ne sommes-nous pas responsables de
leur bon fonctionnement ou de leur
disponibilité continue. Certains contenus
de disque disponibles via la connexion à
internet peuvent ne pas être compatibles
avec ce lecteur. Si vous avez des questions
concernant ces contenus, contactez le
producteur du disque.
Certains contenus internet peuvent
nécessiter une connexion très haut débit.
Même si le lecteur est correctement
raccordé et con guré, il se peut que certains
contenus internet ne puissent pas être lus à
cause d’un encombrement du réseau, de la
qualité ou de la largeur de bande de votre
service internet, ou de problèmes avec le
fournisseur du contenu.
Certaines opérations liées à la connexion
à internet peuvent ne pas être possibles
en raison de certaines restrictions  xées
par le prestataire de services internet (ISP)
fournissant votre connexion internet haut
débit.
Tous les frais facturés par un ISP,
notamment, mais sans s’y limiter, les frais de
connexion, sont à votre charge.
Un port LAN 10 Base-T ou 100 Base-TX est
nécessaire pour un raccordement câblé à ce
lecteur. Si votre service internet ne permet
pas un tel raccordement, vous ne pourrez
pas brancher le lecteur.
Vous devez vous servir d’un routeur pour
pouvoir utiliser le service xDSL.
Un modem DSL est nécessaire pour
utiliser le service DSL et un modem par
câble est nécessaire pour pouvoir utiliser
le service de modem par câble. Suivant la
méthode d’accès de votre ISP et le contrat
d’abonnement souscrit, il est possible que
vous ne puissiez pas utiliser la fonctionnalité
de connexion à internet o erte par ce
lecteur ou que vous soyez limité quant
au nombre d’appareils que vous pouvez
raccorder simultanément. (Si votre ISP
limite l’abonnement à un seul appareil, il est
possible que ce lecteur ne puisse pas être
raccordé lorsqu’un PC est déjà connecté.)
L’utilisation d’un “routeur peut ne pas être
autorisée ou être limitée en fonction des
règles et restrictions mises en place par
votre ISP. Pour plus de détails, contactez
directement votre ISP.
Éteignez tous les appareils réseau non
utilisés dans votre réseau domestique local.
Certains appareils peuvent générer du tra c
sur le réseau.
HB985-DB.BDEUPPK_FRE.indd 30HB985-DB.BDEUPPK_FRE.indd 30 2010-05-14  1:54:242010-05-14  1:54:24
31Installation
3
Installation
Raccordement d’un
périphérique USB
Le lecteur peut lire des  chiers vidéo, musique
et des  chiers images contenus dans le
périphérique USB.
1. Insérez un périphérique USB au port USB
jusqu’à ce qu’il soit bien en place.
Connexion USB
2. Appuyez sur la touche HOME MENU.
Sélectionnez l’option [Film], [Photo] ou
[Musique] à l’aide des touches
U
/
u
/
I
/
i
,
puis appuyez sur ENTER ( ).
3. Sélectionnez un  chier à l’aide des touches
U
/
u
/
I
/
i
, et appuyez sur la touche PLAY ou
ENTER (
) pour lire le  chier.
Vous pouvez véri er à l’écran lespace
disponible sur le périphérique USB.
4. Sélectionnez un autre mode. Retirez le
périphérique avec soin.
REMARQUE
Ce lecteur prend en charge les clés mémoire
USB et disques durs externes aux formats
FAT16, FAT32 et NTFS lors de l’accès aux  chiers
(musique, photos et  lms). Toutefois, les
fonctionnalités BD-LIVE et d’enregistrement
de CD audio ne prennent en charge que les
formats FAT16 et FAT32. Lorsque vous utilisez les
fonctionnalités BD-LIVE et d’enregistrement d’un
CD audio, utilisez une clé USB à mémoire Flash
ou un disque dur externe au format FAT16 ou
FAT32.
Le périphérique USB peut être utilisé pour le
stockage local a n de visionner des disques BD-
LIVE avec internet.
Cet appareil peut prendre en charge jusqu’à
quatre partitions du périphérique USB.
Ne retirez pas le périphérique USB pendant
l’utilisation (lecture, etc.).
Les périphériques USB nécessitant l’installation
d’un programme supplémentaire après la
connexion à un ordinateur ne sont pas pris en
charge.
Périphérique USB : périphérique USB prenant en
charge les technologies USB 1,1 et USB 2,0.
Seuls les  chiers vidéo, musicaux et
photo peuvent être lus.
Pour connaître les
carac
t
éristiques d’utilisation de chaque  chier,
reportez-vous aux pages correspondantes.
Il est recommandé d’e ectuer des sauvegardes
régulières pour éviter la perte de données.
Si vous utilisez un câble d’extension USB, un
concentrateur USB ou un lecteur multiple USB,
il se peut que le périphérique USB ne soit pas
reconnu.
Il est possible que certains périphériques USB ne
fonctionnent pas avec cet appareil.
Les appareils photo numériques et les
téléphones mobiles ne sont pas compatibles.
Vous ne pouvez pas connecter le port USB de
cet appareil à un PC.
HB985-DB.BDEUPPK_FRE.indd 31HB985-DB.BDEUPPK_FRE.indd 31 2010-05-14  1:54:242010-05-14  1:54:24
32 Installation
Installation
3
Réglages
Réglage des paramètres
Vous pouvez modi er les réglages de votre
lecteur dans le menu [Con g.].
1. Appuyez sur la touche HOME MENU (
).
2. Utilisez les touches
I
/
i/U
/
u
pour
sélectionner [Con g.], puis appuyez sur
ENTER ( ). Le menu [Con g.] apparaît.
3. Utilisez les touches
U
/
u
pour sélectionner
l’option de premier niveau souhaitée, puis
appuyez sur
i
pour accéder au deuxième
niveau.
4. Utilisez les touches
U
/
u
pour sélectionner
l’option de deuxième niveau souhaitée, puis
appuyez sur ENTER (
) pour accéder au
troisième niveau.
5. Utilisez les touches
U
/
u
pour sélectionner
le réglage souhaité, puis appuyez sur
i
ou
ENTER ( ) pour con rmer votre choix.
HB985-DB.BDEUPPK_FRE.indd 32HB985-DB.BDEUPPK_FRE.indd 32 2010-05-14  1:54:242010-05-14  1:54:24
33Installation
3
Installation
Menu [AFFICHAGE]
Format d’image
Sélectionnez une option de format d’image en
fonction du type de votre téléviseur.
[4:3 Format respecté]
sélectionnez cette option lorsque l’appareil
est connecté à un téléviseur 4/3 standard.
Les images 16/9 s’a chent avec une bande
noire en haut et en bas de l’écran.
[4:3 Recadrage auto]
sélectionnez cette option lorsque l’appareil
est connecté à un téléviseur 4/3 standard.
Les images sont recadrées pour tenir dans
votre écran de téléviseur. L’image est réduite
sur les côtés.
[16:9 Original]
sélectionnez cette option lorsque l’appareil
est connecté à un téléviseur 16:9. Limage
de format 4:3 s’a che avec son rapport
largeur/hauteur d’origine, avec des bandes
noires sur les côtés gauche et droit.
[16:9 Total]
sélectionnez cette option lorsque l’appareil
est connecté à un téléviseur 16:9. Limage
de format 4:3 est ajustée horizontalement
(dans des proportions linéaires) de sorte à
remplir tout l’écran.
REMARQUE
Vous ne pouvez pas sélectionner les options
[4:3 Format respecté] et [4:3 Recadrage auto]
lorsque la résolution choisie est supérieure à 720p.
Résolution
Cette option permet de dé nir la résolution
de sortie du signal vidéo HDMI et en
composantes. Reportez-vous aux pages 23
et 70 pour plus de détails sur le réglage de la
résolution.
[Auto]
si la prise de sortie HDMI OUT est raccordée
à un téléviseur fournissant des informations
sur l’a chage (EDID), cette option
sélectionne automatiquement la résolution
la mieux adaptée au téléviseur raccordé.
Si seule la sortie COMPONENT VIDEO OUT
est raccordée, la résolution passe à 1080i
(valeur par défaut).
[1080p]
sortie vidéo progressive en 1080 lignes.
[1080i]
sortie vidéo entrelacée en 1080 lignes.
[720p]
sortie vidéo progressive en 720 lignes.
[576p (480p)]
sortie vidéo progressive en 576 (480) lignes.
[576i (480i)]
sortie vidéo entrelacée en 576 (480) lignes.
HB985-DB.BDEUPPK_FRE.indd 33HB985-DB.BDEUPPK_FRE.indd 33 2010-05-14  1:54:252010-05-14  1:54:25
34 Installation
Installation
3
Mode 1080p
Lorsque la résolution est réglée sur 1080p,
sélectionnez [24Hz] pour une présentation
adaptée des  lms (1080p/24 Hz) avec un
téléviseur HDMI compatible avec une entrée
1080p/24 Hz.
REMARQUE
Lorsque vous sélectionnez [24 Hz], vous pouvez
constater une perturbation de l’image lors du
passage du mode vidéo au mode  lm. Dans ce
cas, sélectionnez [50 Hz].
Même lorsque l’option [Mode 1080p] est
réglée sur [24 Hz], si votre téléviseur nest pas
compatible avec le réglage 1080p/24 Hz, la
fréquence de la sortie vidéo sera de 50 Hz.
Rég. couleur HDMI
Sélectionnez le type de sortie de la prise HDMI
OUT. Pour ce réglage, reportez-vous au manuel
de votre téléviseur.
[YCbCr]
sélectionnez cette option lorsque vous
raccordez le lecteur à un téléviseur HDMI.
[RGB]
sélectionnez cette option lorsque vous
raccordez le lecteur à un téléviseur DVI
(RGB).
Menu [LANGUE]
A chage Menu
Sélectionnez une langue pour le menu de
[Con g.] et l’a chage à lécran.
Menu disque/Audio/Sous-titres
Sélectionnez la langue de votre choix pour
la piste audio, les sous-titres et le menu du
disque.
[Original]
désigne la langue d’origine dans laquelle le
disque a été enregistré.
[Autre]
appuyez sur ENTER (
) pour sélectionner
une autre langue. Utilisez les touches
numériques, puis appuyez sur
ENTER ( ) pour saisir le numéro à 4 chi res
correspondant indiqué dans la liste des
codes de langue, page 69.
[Arrêt] (pour le sous-titrage des disques
uniquement)
désactive les sous-titres.
REMARQUE
Votre réglage de la langue peut ne pas fonctionner
sur certains disques.
HB985-DB.BDEUPPK_FRE.indd 34HB985-DB.BDEUPPK_FRE.indd 34 2010-05-14  1:54:252010-05-14  1:54:25
35Installation
3
Installation
Menu [AUDIO]
Réglages enceintes
Pour obtenir le meilleur son possible, utilisez
l’écran de con guration des haut-parleurs pour
dé nir le volume des haut-parleurs que vous
avez connecté et leur distance à partir de votre
position d’écoute. Utilisez le test pour ajuster le
volume des haut-parleurs au même niveau.
[Enceintes]
Sélectionnez le haut-parleur que vous
souhaitez ajuster.
[Volume]
Dé nissez le volume de chaque haut-
parleur.
[Distance]
Ajustez la distance entre chaque haut-
parleur et votre position d’écoute.
[Test/ Arrêt test son]
Les haut-parleurs émettent un signal d’essai.
[OK]
Con rmez les réglages.
[Annuler]
Annuler les réglages.
HD AV Sync
Il arrive que la TV numérique rencontre un
décalage entre l’image et le son. Si cela se
produit vous pouvez régler le délai de l’arrivée
du son pour qu’il « attende » l’arrivée de l’image
: c’est ce qu’on appelle la synchronisation HD
AV. Utilisez les touches
U u
pour faire dé ler
la durée d’attente souhaitée que vous pouvez
dé nir entre 0 et 300 ms.
Le délai peut varier en fonction du canal de TV
numérique que vous regardez. Si vous changez
de chaîne, vous devrez probablement redé nir
la synchronisation HD AV.
DRC (Contrôle de la gamme
dynamique)
Lorsqu’un  chier encodé en Dolby Digital ou en
Dolby Digital Plus est en lecture, vous avez la
possibilité de compresser la plage dynamique
de la sortie audio (la di érence entre le son
maximum et le son minimum).Cela vous
permet de regarder une vidéo à un volume
inférieur sans perdre la clarté du son. Réglez le
[DRC] sur [Marche] pour obtenir cet e et.
REMARQUE
Le réglage du DRC peut uniquement être e ectué
lorsqu’il n’y a pas de disque dans le lecteur ou
lorsque l’ampli est en mode Stop.
HB985-DB.BDEUPPK_FRE.indd 35HB985-DB.BDEUPPK_FRE.indd 35 2010-05-14  1:54:252010-05-14  1:54:25
36 Installation
Installation
3
Menu [VERROU]
Pour pouvoir accéder aux réglages [VERROU],
vous devez saisir le code de sécurité à quatre
chi res que vous avez créé.
Si vous n’avez pas encore saisi de mot de passe,
vous serez invité à le faire. Saisissez deux fois un
mot de passe à quatre chi res, puis appuyez
sur ENTER (
) pour valider le nouveau mot de
passe.
Mot de passe
Vous pouvez créer ou modi er le mot de passe.
[Sans]
Saisissez deux fois un mot de passe à quatre
chi res, puis appuyez sur ENTER (
) pour
valider le nouveau mot de passe.
[Modi er]
saisissez le mot de passe actuel et appuyez
sur la touche ENTER (
). Saisissez deux
fois un mot de passe à quatre chi res, puis
appuyez sur ENTER ( ) pour valider le
nouveau mot de passe.
REMARQUE
Si vous vous trompez, appuyez sur la touche CLEAR
avant d’appuyer sur ENTER
( )
. Saisissez ensuite le
mot de passe correct.
Si vous oubliez votre mot de passe,
Si vous oubliez votre mot de passe, vous pouvez
l’e acer en procédant comme suit:
1. Retirez tout disque contenu dans le lecteur.
2. Sélectionnez l’option [Verrou] dans le menu
de [Con g.].
3. Entrez “210499” sur le menu [Verrou], à l’aide
du clavier. Le mot de passe est e acé
.
Contrôle parental DVD
Bloque la lecture de DVD associés à un
certain niveau de contrôle en fonction de leur
contenu. (Tous les disques ne sont pas associés
à un niveau de contrôle.)
[Contrôle parental 1-8]
le niveau 1 est le plus restrictif, et le niveau
8 est le moins restrictif.
[Déverrouillage]
Lorsque cette option est sélectionnée,
le contrôle parental nest pas activé et le
disque peut être lu sans restriction.
Contrôle parental BD
Déterminez une limite d’âge pour la lecture
d’un BD-ROM. Utilisez les touches numériques
pour indiquer une limite de visionnage pour
les BD-ROM.
[255]
tous les BD-ROM peuvent être lus.
[0-254]
empêche la lecture des BD-ROM avec
des niveaux de contrôle correspondants
enregistrés dessus.
REMARQUE
Le [Contrôle parental BD] ne s’applique qu’aux disques
Blu-ray disposant du système de contrôle avancé.
Indicatif régional
Indiquez le code de la région dont les normes
ont servi à déterminer le niveau de contrôle du
DVD, en vous reportant à la liste page 68.
HB985-DB.BDEUPPK_FRE.indd 36HB985-DB.BDEUPPK_FRE.indd 36 2010-05-14  1:54:252010-05-14  1:54:25
37Installation
3
Installation
Menu [RÉSEAU]
Con g. connexion
Si votre environnement de réseau domestique
est prêt pour la connexion de l’appareil, celui-
ci doit être con guré pour la connexion réseau
a n de pouvoir communiquer sur le réseau.
(Reportez-vous à la section “Raccordement à
votre réseau domestique”, page 28.)
Statut connexion
Si vous voulez connaître l’état du réseau
sur le lecteur, sélectionnez l’option [Statut
connexion] et appuyez sur la touche ENTER
( ) pour véri er si une connexion réseau ou
internet a été établie.
Connexion BD-LIVE
Vous pouvez limiter l’accès à internet lorsque
les fonctions BD-LIVE sont utilisées.
[Autorisée]
l’accès à internet est autorisé pour tous les
contenus BD-LIVE.
[Autorisée en partie]
l’accès à internet est autorisé uniquement
pour les contenus BD-LIVE dotés de
certi cats des fournisseurs de contenus.
L’accès à internet et les fonctions en ligne
AACS sont interdites pour l’ensemble des
contenus BD-LIVE dépourvus de certi cat.
[Interdite]
l’accès à internet est interdit pour
l’ensemble des contenus BD-LIVE.
Menu [AUTRES]
DivX VOD
À propos des vidéos DivX: DivX® est un
format vidéo numérique créé par DivX, Inc.
Cet appareil est o ciellement certi é DivX
et peut donc lire les vidéos DivX. Pour plus
d’informations et pour obtenir des outils
logiciels permettant de convertir vos  chiers
en vidéos DivX, consultez le site
www.divx.com.
À propos des vidéos à la demande DivX : vous
devez enregistrer cet appareil certi é DivX®
pour pouvoir lire le contenu de vidéos à la
demande (VOD) DivX.
Pour générer le code d’enregistrement,
accédez à la section DivX VOD du menu de
con guration. Accédez ensuite au site vod.
divx.com et renseignez ce code pour terminer
le processus d’enregistrement et obtenir plus
d’informations sur les vidéos à la demande
DivX.
[Enregistrer]
Permet d’a cher le code d’enregistrement
de votre lecteur.
[Annuler enregistr.]
Permet de désactiver votre lecteur et
d’a cher le code de désactivation.
REMARQUE
Toutes les vidéos téléchargées via le service DivX
VOD avec le code d’enregistrement de ce lecteur
ne peuvent être lues que sur cet appareil.
HB985-DB.BDEUPPK_FRE.indd 37HB985-DB.BDEUPPK_FRE.indd 37 2010-05-14  1:54:252010-05-14  1:54:25
38 Installation
Installation
3
Extinction auto
Léconomiseur d’écran s’a che lorsque vous
laissez le lecteur en mode Stop pendant
environ 5 minutes. Si vous réglez cette option
sur [Marche], l’ampli s’éteint automatiquement
une fois que l’économiseur d’écran s’est a ché
pendant 25 minutes.
Réglez cette option sur [Arrêt] pour quitter
l’économiseur d’écran pendant que l’utilisateur
manipule le lecteur.
Initialiser
Réglages d’usine
Vous pouvez rétablir les réglages d’usine
par défaut du lecteur.
E acer stockage BD
Initialise les contenus BD à partir du
périphérique de stockage USB connecté.
REMARQUE
Si vous utilisez l’option [Réglages d’usine] pour
réinitialisez le lecteur aux réglages d’origine fait en
usine, vous devez redé nir toutes les activations
des services en ligne et tous les paramètres réseau.
Information logiciel
A che la version actuelle du logiciel.
HB985-DB.BDEUPPK_FRE.indd 38HB985-DB.BDEUPPK_FRE.indd 38 2010-05-14  1:54:252010-05-14  1:54:25
39Installation
3
Installation
E ets sonores
Vous pouvez choisir un e et sonore approprié.
Appuyez sur SOUND jusqu’à ce que le mode
souhaité apparaisse sur l’écran d’a chage du
lecteur ou sur la TV. Les éléments a chés pour
l’égaliseur peuvent être di érents en fonction
des sources sonores et des e ets.
[Pioneer 1]: Vous permet dobtenir un réglage
du son adapté aux enceintes de petite taille
(S-BD303).
[Pioneer 2]: Vous permet dobtenir un réglage
du son adapté aux enceintes de grande taille
(S-BD707T).
[Bypass]: Les logiciels comportant des signaux
audio surround multicanaux sont lus à la
manière dont ils ont été enregistré.
[Bass Blast]: Renforce l’e et de son de basse
du haut-parleur avant gauche au haut-parleur
avant droit et du subwoofer.
[PL ll Movie]: Exécute le mode vidéo Pro Logic
II qui décode le signal d’entrée et créé cinq
canaux de sortie à toute la largeur de bande
à partir de sources à 2 canaux. Ce réglage est
idéal pour regarder des vidéos enregistrées en
overdub (surimpression) ou des vieux  lms.
Ce mode est uniquement disponible pour les
sources à 2 canaux.
[PL ll Music]: Exécute le mode musique Pro
Logic II qui décode le signal d’entrée et créé
cinq canaux de sortie à toute la largeur de
bande à partir de sources à 2 canaux. Ce
réglage est idéal pour les sources stéréo
classiques telles que les CD. Ce mode est
uniquement disponible pour les sources à 2
canaux.
[Clear Voice]: Ce mode permet de rendre le
son des voix clair en améliorant la qualité de
son vocal.
[Game]: Vous pouvez béné cier d’un son plus
virtuel pendant vos parties de jeux vidéo.
[Night]: Cet e et sonore peut être utile lorsque
vous souhaitez regarder une vidéo à un faible
volume le soir.
[Mus. ReTouch]: Lorsque vous écoutez des
chiers MP3 ou autre format de musique
compressée, vous pouvez augmenter le son.
Ce mode est uniquement disponible pour les
sources à 2 canaux.
[Loudness]: Permet d’améliorer le rendu des
sons graves et aigus.
HB985-DB.BDEUPPK_FRE.indd 39HB985-DB.BDEUPPK_FRE.indd 39 2010-05-14  1:54:252010-05-14  1:54:25
40 Utilisation
Utilisation
4
Lecture générale
Lecture de disques
1. Appuyez sur
Z
OPEN/CLOSE, et placez un
disque sur le plateau.
2. Appuyez sur
Z
OPEN/CLOSE pour fermer le
plateau du disque.
Pour la plupart des CD audio, BD-
ROM et DVD-ROM, la lecture démarre
automatiquement.
3. Appuyez sur la touche
HOME MENU.
4. Sélectionnez l’option [Film], [Photo] ou
[Musique] à l’aide des touches
U
/
u
/
I
/
i
,
puis appuyez sur ENTER ( ).
5. Sélectionnez l’option Disque à l’aide des
touches
I
/
i
, puis appuyez sur ENTER (
).
Lorsque vous connectez jusqu’à deux
périphériques, une illustration semblable à
celle ci-dessus apparaît à lécran.
6. Sélectionnez un  chier à l’aide des touches
U
/
u
/
I
/
i
, puis appuyez sur
B
PLAY ou
ENTER (
) pour lire le  chier.
REMARQUE
Les fonctions de lecture décrites dans ce guide
ne sont pas toujours disponibles pour tous les
chiers et supports. Certaines fonctions peuvent
être limitées pour de multiples raisons.
En fonction des titres du BD-ROM, une
connexion à un périphérique USB peut être
nécessaire pour une lecture appropriée.
4
Utilisation
HB985-DB.BDEUPPK_FRE.indd 40HB985-DB.BDEUPPK_FRE.indd 40 2010-05-14  1:54:252010-05-14  1:54:25
41Utilisation
4
Utilisation
Arrêt de la lecture
Appuyez sur la touche
x
STOP pendant la
lecture.
Suspension de la lecture
Appuyez sur la touche
X
PAUSE/STEP pendant
la lecture.
Appuyez sur la touche
B
PLAY pour reprendre
la lecture.
Lecture image par image
Appuyez sur la touche
X
PAUSE/STEP pendant
la lecture d’un  lm.
Appuyez plusieurs fois sur la touche
X
PAUSE/
STEP pour une lecture image par image.
Avance ou retour rapide
Appuyez sur la touche
m
ou
M
pour
utiliser l’avance ou le retour rapide pendant la
lecture.
Vous pouvez modi er la vitesse de lecture en
appuyant plusieurs fois sur la touche
m
ou
M
.
Lecture au ralenti
Lorsque la lecture est en pause, appuyez
plusieurs fois sur la touche
M
pour changer
la vitesse de lecture au ralenti.
Accès à la piste, au  chier ou au
chapitre suivant/précédent
Pendant la lecture, appuyez sur la touche
.
ou
>
pour sélectionner la piste, le
chapitre ou le  chier suivant ou pour revenir
au début de la piste, du chapitre ou du  chier
en cours.
Utilisation du menu du disque
BD
DVD
AVCHD
A chage du menu du disque
Lécran du menu peut s’a cher
immédiatement après l’insertion d’un disque
contenant un menu. Si vous voulez a cher le
menu du disque pendant la lecture, appuyez
sur la touche MENU.
Utilisez les touches
U
/
u
/
I
/
i
pour naviguer
dans les options de menu.
A chage du menu contextuel
Certains disques BD-ROM contiennent un menu
contextuel qui apparaît pendant la lecture.
Appuyez sur la touche POPUP/ TOP MENU
pendant la lecture et utilisez les touches
U
/
u
/
I
/
i
pour naviguer dans les options de menu.
Reprise de la lecture
BD
DVD
AVCHD
MOVIE
ACD
MUSIC
Si le disque le permet, le lecteur garde en
mémoire l’endroit où vous avez arrêté la lecture
en appuyant sur
x
(STOP). Si
Xx
(reprise
de la lecture possible) s’a che brièvement à
l’écran, appuyez sur la touche
B
(PLAY)
pour
reprendre la lecture là où vous l’aviez laissée.
Si vous appuyez deux fois sur la touch
x
(STOP) ou sortez le disque,
x
”(arrêt complet
de la lecture) s’a che à l’écran. Le lecteur
e ace le repère de reprise de la lecture.
REMARQUE
Le repère de reprise de la lecture peut être
e acé si vous appuyez sur une touche (par
exemple,
1
(POWER),
Z
(OPEN/CLOSE), etc).
Sur les disques BD-Vidéo incluant la capacité
BD-J, la fonction de reprise de la lecture n’est pas
disponible.
Sur un titre interactif BD-ROM, l’appareil sera en
mode arrêt complet si vous appuyez une fois sur
la touche
x
(STOP) pendant la lecture.
HB985-DB.BDEUPPK_FRE.indd 41HB985-DB.BDEUPPK_FRE.indd 41 2010-05-14  1:54:262010-05-14  1:54:26
42 Utilisation
Utilisation
4
Lecture avancée
Lecture répétée
BD
DVD
AVCHD
ACD
MUSIC
Pendant la lecture, appuyez sur la touche
REPEAT (
) plusieurs fois de suite pour
sélectionner le mode de répétition souhaité.
Blu ray Disc/DVD
A-
– La partie sélectionnée sera répétée
continuellement.
Chapitre
– Le chapitre en cours est
répété.
Titre
– Le titre en cours est répété.
Pour revenir à la lecture normale, appuyez
plusieurs fois sur la touche REPEAT ( )
pour sélectionner [Arrêt].
CD audio/Fichiers musicaux
– La piste en cours est répétée.
Toutes les pistes ou  chiers sont
répétés.
– Les pistes ou  chiers sont répétés dans
un ordre aléatoire.
Toutes les pistes ou  chiers sont
répétés dans un ordre aléatoire.
– La partie sélectionnée est répétée
continuellement (CD audio uniquement).
Pour revenir à la lecture normale, appuyez
sur la touche CLEAR.
REMARQUE
Si vous appuyez sur
>
une fois lors de la
répétition d’un chapitre ou de la lecture d’une
piste, la lecture répétée s’annule.
Cette fonction peut ne pas s’appliquer pour
certains disques ou titres.
Répétition d’une partie
spéci que
BD
DVD
AVCHD
ACD
Ce lecteur peut répéter une partie que vous
avez sélectionné.
1. Lors de la lecture, appuyez sur la touche
REPEAT (
) pour sélectionner [A-] au début
de la partie que vous souhaitez faire répéter.
Puis appuyez sur la touche ENTER ( ).
2. Appuyez sur la touche ENTER (
) à la  n de
la partie à répéter. La partie que vous avez
sélectionné sera répétée continuellement.
3. Pour revenir à la lecture normale, appuyez
sur REPEAT (
) à plusieurs reprises pour
sélectionner [Arrêt] ou appuyez sur CLEAR.
REMARQUE
Vous ne pouvez pas sélectionner une partie de
moins de 3 secondes.
Recherche d’index
BD
DVD
AVCHD
MOVIE
Vous pouvez démarrer la lecture à partir de
points mémorisés (neuf au maximum).
Saisie d’un index
1. Appuyez sur la touche MARKER à l’endroit
souhaité pendant la lecture. L’icône de
repère apparaît un court instant sur l’écran
du téléviseur.
2. Répétez l’étape 1 pour placer jusqu’à neuf
repères.
HB985-DB.BDEUPPK_FRE.indd 42HB985-DB.BDEUPPK_FRE.indd 42 2010-05-14  1:54:262010-05-14  1:54:26
43Utilisation
4
Utilisation
Lecture d’une scène indexée
1. Appuyez sur la touche SEARCH pour faire
apparaître le menu de recherche à l’écran.
2. Appuyez sur une touche numérique pour
sélectionner le numéro d’index auquel vous
voulez retourner. La lecture commence à
partir de la scène indexée.
Suppression d’un repère
1. Appuyez sur la touche SEARCH pour faire
apparaître le menu de recherche à l’écran.
2. Appuyez sur la touche
u
pour mettre en
évidence un numéro de repère. Utilisez les
touches
I
/
i
pour sélectionner une scène
indexée que vous voulez supprimer.
3. Appuyez sur la touche CLEAR pour e acer
la scène indexée du menu de recherche.
REMARQUE
Selon les disques, les titres et la capacité du
serveur, il se peut que cette fonction ne soit pas
disponible.
Tous les points marqués sont e acés si le titre
est complètement à l’arrêt (
x
) , si le titre est
modi é ou si vous sortez le disque.
Si la durée totale du titre est inférieure à 10
secondes, cette fonction n’est pas disponible.
Utilisation du menu de
recherche
BD
DVD
AVCHD
MOVIE
À l’aide du menu de recherche, vous pouvez
facilement trouver le point à partir duquel vous
voulez démarrer la lecture.
Recherche d’un point
1. Pendant la lecture, appuyez sur la touche
SEARCH pour a cher le menu de recherche.
2. Utilisez les touches
I
/
i
pour faire dé ler la
lecture de 15 secondes vers l’arrière ou vers
l’avant. Vous pouvez sélectionner un point
que vous voulez passer en maintenant
enfoncées les touches
I
/
i
.
Démarrage de la lecture à partir
d’une scène indexée
1. Appuyez sur la touche SEARCH pour faire
apparaître le menu de recherche à l’écran.
2. Appuyez sur la touche
u
pour mettre en
évidence un numéro de repère. Utilisez les
touches
I
/
i
pour sélectionner une scène
indexée à partir de laquelle vous voulez
démarrer la lecture.
3. Appuyez sur la touche ENTER (
) pour
démarrer la lecture à partir de la scène
indexée.
REMARQUE
Selon les disques, les titres et la capacité du
serveur, il se peut que cette fonction ne soit pas
disponible.
Il se peut que cette fonction ne soit pas
disponible pour certains contenus du menu
[Home Link], suivant le type de  chier et la
capacité du serveur DLNA.
HB985-DB.BDEUPPK_FRE.indd 43HB985-DB.BDEUPPK_FRE.indd 43 2010-05-14  1:54:262010-05-14  1:54:26
44 Utilisation
Utilisation
4
Mémoire de la dernière scène
BD
DVD
Cet appareil mémorise la dernière scène du
dernier disque qui a été visionné. La dernière
scène reste en mémoire même si vous sortez
le disque du lecteur ou éteignez l’appareil.
Si vous insérez un disque dont la scène est
mémorisée, celle-ci est automatiquement lue.
REMARQUE
La fonction Mémoire de la dernière scène d’un
disque précédent est e acée dès qu’un disque
di érent est lu.
Selon le disque, il se peut que cette fonction ne
soit pas disponible.
Cet appareil ne mémorise pas les paramètres
d’un disque si vous l’éteignez avant de
commencer à lire ce disque.
A chage à l’écran
Vous pouvez a cher et modi er di érents
réglages et informations à propos du contenu.
A chage à l’écran des
informations sur le contenu
BD
DVD
AVCHD
MOVIE
1. Pendant la lecture, appuyez sur la touche
DISPLAY (
) pour a cher di érentes
informations sur la lecture.
a
h
g
f
e
d
c
b
a
Titre – Numéro du titre en cours/nombre
total de titres.
b
Chapitre – numéro du chapitre en cours/
nombre total de chapitres
c
HeureTemps de lecture écoulé/durée
de lecture totale.
d
Audio – langue ou canal audio
sélectionné
e
Sous-titrage – titrage: sous-titre
sélectionné
f
Angle – angle sélectionné/nombre total
d’angles
g
Format d’image – Format dimage
sélectionné pour le téléviseur.
h
Mode image – Mode d’image
sélectionné.
HB985-DB.BDEUPPK_FRE.indd 44HB985-DB.BDEUPPK_FRE.indd 44 2010-05-14  1:54:262010-05-14  1:54:26
45Utilisation
4
Utilisation
2. Sélectionnez une option à l’aide des
touches
U
/
u
.
3. Utilisez les touches
I
/
i
pour régler la
valeur de l’option sélectionnée.
4. Appuyez sur la touche RETURN (
O
) pour
quitter l’a chage à l’écran.
REMARQUE
Si aucune touche nest actionnée pendant
quelques secondes, l’a chage à lécran disparaît.
Il est possible qu’un numéro de titre ne puisse
pas être sélectionné sur certains disques.
Les éléments disponibles peuvent varier suivant
les disques ou les titres.
Si un titre interactif BD est en cours de lecture,
certaines informations sur les réglages s’a chent
à l’écran mais ne peuvent pas être modi ées.
Lecture à partir d’un code de
temps
BD
DVD
AVCHD
MOVIE
1. Appuyez sur la touche DISPLAY (
)
pendant la lecture. La zone d’a chage du
temps montre le temps de lecture écoulé.
2. Sélectionnez l’option [Heure] et saisissez
l’heure de début requise en heures, minutes
et secondes, de gauche à droite.
Par exemple, pour trouver une scène située
à 2 heures, 10 minutes et 20 secondes du
début, saisissez “21020”.
Utilisez les touches
I
/
i
pour faire dé ler la
lecture de 60 secondes vers l’arrière ou vers
l’avant.
3. Appuyez sur la touche ENTER (
) pour
démarrer la lecture à partir de l’heure
sélectionnée.
REMARQUE
Il se peut que cette fonction ne soit pas
disponible avec certains disques ou titres.
Il se peut que cette fonction ne soit pas
disponible pour certains contenus du menu
[Home Link], suivant le type de  chier et la
capacité du serveur DLNA.
HB985-DB.BDEUPPK_FRE.indd 45HB985-DB.BDEUPPK_FRE.indd 45 2010-05-14  1:54:262010-05-14  1:54:26
46
Utilisation
Utilisation
4
Modi cation de la source audio
BD
DVD
AVCHD
MOVIE
1. Pendant la lecture, appuyez sur la touche
DISPLAY (
) pour activer l’a chage à
l’écran.
2. Utilisez les touches
U
/
u
pour sélectionner
l’option [Audio].
3. Utilisez les touches
I
/
i
pour sélectionner
la langue audio, la piste audio ou le canal
audio de votre choix.
REMARQUE
Certains disques ne vous permettent de modi er
vos choix audio qu’en passant par le menu du
disque. Si tel est le cas, appuyez sur la touche
POPUP/ TOP MENU ou MENU et sélectionnez le
réglage audio de votre choix parmi les options
du menu de disque.
Immédiatement après avoir modi é le réglage
audio, vous pouvez constater un décalage
temporaire entre l’image et le son.
Sélection de la langue des sous-
titres
BD
DVD
AVCHD
MOVIE
1. Pendant la lecture, appuyez sur la touche
DISPLAY (
) pour activer l’a chage à
l’écran.
2. Utilisez les touches
U
/
u
pour sélectionner
l’option [Sous-titrage].
3. Utilisez les touches
I
/
i
pour sélectionner
la langue de votre choix pour les sous-titres.
4. Appuyez sur la touche RETURN (
O
) pour
quitter l’a chage à l’écran.
REMARQUE
Certains disques ne vous permettent de modi er
vos choix de sous-titres quen passant par le menu
du disque. Si tel est le cas, appuyez sur la touche
POPUP/ TOP MENU ou MENU et sélectionnez le
sous-titre de votre choix parmi les options du
menu de disque.
HB985-DB.BDEUPPK_FRE.indd 46HB985-DB.BDEUPPK_FRE.indd 46 2010-05-14  1:54:262010-05-14  1:54:26
47
Utilisation
4
Utilisation
Visionnage sous un angle
di érent
BD
DVD
Si le disque contient des scènes enregistrées
sous di érents angles de prise de vue, vous
pouvez modi er l’angle pendant la lecture.
1. Pendant la lecture, appuyez sur la touche
DISPLAY ( ) pour activer l’a chage à
l’écran.
2. Utilisez les touches
U
/
u
pour sélectionner
l’option [Angle].
3. Utilisez les touches
I
/
i
pour sélectionner
l’angle de votre choix.
4. Appuyez sur la touche RETURN (
O
) pour
quitter l’a chage à l’écran.
Modi cation du format d’image
BD
DVD
AVCHD
MOVIE
Vous pouvez modi er le réglage de format
d’image pendant la lecture.
1. Pendant la lecture, appuyez sur la touche
DISPLAY (
) pour activer l’a chage à
l’écran.
2. Utilisez les touches
U
/
u
pour sélectionner
l’option [Format d’image].
3. Utilisez les touches
I
/
i
pour sélectionner
l’option de votre choix.
4. Appuyez sur la touche RETURN (
O
) pour
quitter l’a chage à l’écran.
REMARQUE
Même si vous modi ez la valeur de loption
[Format dimage] dans l’a chage à lécran,
l’option [Format d’image] du menu [Con g.] reste
inchangée.
Modi cation du mode d’image
BD
DVD
AVCHD
MOVIE
Vous pouvez modi er l’option [Mode image]
pendant la lecture.
1. Pendant la lecture, appuyez sur la touche
DISPLAY (
) pour activer l’a chage à
l’écran.
2. Utilisez les touches
U
/
u
pour sélectionner
l’option [Mode image].
3. Utilisez les touches
I
/
i
pour sélectionner
l’angle de votre choix.
4. Appuyez sur la touche RETURN (
O
) pour
quitter l’a chage à l’écran.
Réglage de l’option [Utilisateur]
1. Pendant la lecture, appuyez sur la touche
DISPLAY (
) pour activer l’a chage à
l’écran.
2. Utilisez les touches
U
/
u
pour sélectionner
l’option [Mode image].
3. Utilisez les touches
I
/
i
to pour
sélectionner l’option [Paramet. User], puis
appuyez sur la touche ENTER (
).
4. Utilisez les touches
U
/
u
/
I
/
i
pour régler
les options [Mode image].
Sélectionnez l’option [Défaut], puis appuyez
sur la touche ENTER ( ) pour rétablir tous
les réglages vidéo.
5. Utilisez les touches
U
/
u
/
I
/
i
pour
sélectionner l’option [Fermer], puis appuyez
sur la touche ENTER (
) pour terminer le
réglage.
HB985-DB.BDEUPPK_FRE.indd 47HB985-DB.BDEUPPK_FRE.indd 47 2010-05-14  1:54:262010-05-14  1:54:26
48
Utilisation
Utilisation
4
Utilisation des
fonctions BD-LIVE
Cet appareil vous permet d’utiliser des
fonctions telles que l’incrustation PIP, les
programmes audio secondaires, les bonus
virtuels, etc., avec les disques BD-Vidéo
prenant en charge la technologie BONUSVIEW
(BD-ROM version 2 Pro l 1, version 1.1/Final
Standard Pro le).
Limage et le programme audio secondaires
peuvent être lus à partir d’un disque
compatible avec la fonction d’incrustation
PIP. Pour connaître la méthode de lecture,
reportez-vous aux instructions relatives au
disque.
En plus de la fonction BONUSVIEW, les disques
BD-Vidéo prenant en charge la technologie
BD-LIVE (BD-ROM version 2 Pro l 2), qui
comporte une fonction d’extension réseau,
vous permettent de béné cier d’autres
fonctionnalités, telles que le téléchargement
des bandes-annonces de nouveaux  lms, en
connectant cet appareil à internet.
1. Véri er la connexion et les paramètres
réseau (voir pages 28-30).
2. Insérez un périphérique de stockage USB
dans le port USB à l’avant du lecteur.
Un périphérique de stockage USB est
nécessaire pour pouvoir télécharger les
contenus en bonus.
Connexion USB
3 . Appuyez sur la touche HOME MENU, et
réglez l’option [Connexion BD-LIVE] dans le
menu [Con g.] (voir page 37).
Selon le disque, il se peut que la fonction
BD-LIVE soit inopérante si l’option
[Connexion BD-LIVE] est réglée sur
[Autorisée en partie].
4 . Insérez un BD-ROM comportant des
fonctionnalités BD-LIVE.
Les opérations disponibles di èrent selon
le disque. Reportez-vous au manuel fourni
avec le disque.
REMARQUE
Ne retirez pas le périphérique USB connecté
pendant le téléchargement du contenu ou
lorsqu’un disque Blu-ray se trouve encore à
l’intérieur du lecteur. Cela pourrait endommager
le périphérique USB connecté et les
fonctionnalités BD-LIVE risqueraient de ne plus
fonctionner correctement avec ce périphérique.
Si le périphérique USB connecté semble
endommagé suite à une telle action, vous
pouvez le formater sur votre PC et le réutiliser
ensuite avec ce lecteur.
Le fournisseur de contenus est libre de
restreindre l’accès aux contenus de BD-LIVE dans
certains territoires.
Plusieurs minutes peuvent être nécessaires pour
charger les contenus BD-LIVE et les visionner.
HB985-DB.BDEUPPK_FRE.indd 48HB985-DB.BDEUPPK_FRE.indd 48 2010-05-14  1:54:272010-05-14  1:54:27
49
Utilisation
4
Utilisation
Lecture d’un  chier
vidéo et d’un disque
VR
Cet appareil permet de lire des disques DVD-
RW enregistrés au format VR (Video Recording)
et des  chiers vidéo stockés sur un disque ou
sur un périphérique USB.
1. Appuyez sur la touche
HOME MENU.
2. Sélectionnez l’option [Film] à l’aide des
touches
U
/
u
/
I
/
i
, puis appuyez sur ENTER
( ).
3. Sélectionnez le périphérique à l’aide des
touches
I
/
i
et appuyez sur la touche
ENTER ( ).
Lorsque vous connectez jusqu’à deux
périphériques, une illustration semblable à
celle ci-dessus apparaît à lécran.
4. Sélectionnez un  chier à l’aide des touches
U
/
u
/
I
/
i
, puis appuyez sur
B
PLAY ou
ENTER (
) pour lire le  chier.
REMARQUE
Les impératifs concernant les  chiers sont
décrits page 11.
Vous pouvez utiliser di érentes fonctions de
lecture. Reportez-vous aux pages 40-47.
Les disques au format DVD-VR non  nalisés ne
peuvent pas être lus par cet appareil.
Certains DVD-VR sont créés avec des données
CPRM par un enregistreur de DVD. Cet appareil
ne pr
end pas en charge ces types de disques.
Présentation de la technologie CPRM
La technologie CPRM est un système de
protection contre la copie (avec cryptage des
contenus) autorisant uniquement
l’enregistrement des programmes enregistrables
une fois. CPRM signi e Content Protection for
Recordable Media (protection du contenu des
supports enregistrables).
HB985-DB.BDEUPPK_FRE.indd 49HB985-DB.BDEUPPK_FRE.indd 49 2010-05-14  1:54:272010-05-14  1:54:27
50
Utilisation
Utilisation
4
Sélection d’un  chier de sous-
titres
MOVIE
Si le  chier vidéo et le  chier de sous-titres
portent le même nom, le  chier de sous-titres
est lu automatiquement pendant la lecture du
chier vidéo.
Si le nom du  chier de sous-titres est
di érent de celui du  chier vidéo, vous devez
sélectionner le  chier de sous-titres dans le
menu [Film] avant de lancer la lecture du  lm.
1. Utilisez les touches
U
/
u
/
I
/
i
pour
sélectionner le  chier de sous-titres que
vous voulez lire dans le menu [Film].
2. Appuyez sur la touche ENTER (
).
Appuyez de nouveau sur la touche ENTER
( ) pour désélectionner le  chier de sous-
Le  chier de sous-titres sélectionné s’a che
pendant la lecture du  chier vidéo.
REMARQUE
Si vous appuyez sur la touche
x
STOP pendant
la lecture, la sélection des sous-titres est annulée.
Cette option peut ne pas être utilisable avec la
fonction [Home Link].
Modi cation de la page de code
des sous-titres
MOVIE
Si les sous-titres ne s’a chent pas
correctement, vous pouvez modi er la page
de code des sous-titres pour en améliorer
l’a chage.
1. Pendant la lecture, appuyez sur la touche
DISPLAY (
) pour activer l’a chage à
l’écran.
2. Utilisez les touches
U
/
u
pour sélectionner
l’option [Page de codes].
3. Utilisez les touches
I
/
i
pour sélectionner
l’option de code de votre choix.
4. Appuyez sur la touche RETURN (
O
) pour
quitter l’a chage à l’écran.
HB985-DB.BDEUPPK_FRE.indd 50HB985-DB.BDEUPPK_FRE.indd 50 2010-05-14  1:54:272010-05-14  1:54:27
51
Utilisation
4
Utilisation
Lecture d’un  chier
photo
Ce lecteur vous permet de visionner des
chiers photo.
1. Appuyez sur la touche
HOME MENU
2. Sélectionnez l’option [Photo] à l’aide des
touches
I
/
i
, puis appuyez sur ENTER ( ).
3. Sélectionnez le périphérique à l’aide des
touches
I
/
i
et appuyez sur la touche
ENTER ( ).
Lorsque vous connectez jusqu’à deux
périphériques, une illustration semblable à
celle ci-dessus apparaît à lécran.
4. Sélectionnez un  chier à l’aide des touches
U
/
u
/
I
/
i
, puis appuyez sur ENTER (
) pour
a cher la photo correspondante.
Lecture d’un diaporama
Appuyez sur la touche
B
PLAY pour lancer le
diaporama.
Arrêt d’un diaporama
Appuyez sur la touche
x
STOP pendant la
lecture du diaporama.
Suspension d’un diaporama
Appuyez sur la touche
X
PAUSE/STEP pendant
la lecture du diaporama.
Appuyez sur la touche
B
PLAY pour relancer le
diaporama.
Accès à la photo suivante/précédente
Lorsqu’une photo est a chée en plein écran,
appuyez sur la touche
I
ou
i
pour accéder à
la photo précédente ou suivante.
REMARQUE
Les impératifs concernant les  chiers sont
décrits page 11.
Vous pouvez utiliser di érentes fonctions de
lecture. Reportez-vous aux pages 40-47.
HB985-DB.BDEUPPK_FRE.indd 51HB985-DB.BDEUPPK_FRE.indd 51 2010-05-14  1:54:272010-05-14  1:54:27
52
Utilisation
Utilisation
4
Options disponibles pendant
l’a chage d’une photo
Vous pouvez utiliser di érentes options
pendant l’a chage d’une photo en plein
écran.
1. Lorsqu’une photo est a chée en plein
écran, appuyez sur la touche DISPLAY (
)
pour a cher le menu des options.
2. Sélectionnez une option à l’aide des
touches
U
/
u
.
a
g
f
e
d
c
b
h
a
Photo en cours/nombre total de
photos – Utilisez la touche
I
/
i
pour
a cher la photo précédente ou suivante.
b
Diaporama – Appuyez sur la touche
ENTER (
) pour lancer ou suspendre le
diaporama.
c
Sélect. musique – Sélectionnez la
musique de fond du diaporama.
d
Musique –Appuyez sur la touche ENTER
(
) pour lire ou suspendre la musique de
fond.
e
Rotation – Appuyez sur la touche ENTER
(
) pour faire pivoter la photo dans le
sens des aiguilles d’une montre.
f
Zoom – Appuyez sur la touche ENTER
(
)pour a cher le menu [Zoom].
g
E et – Utilisez les touches
I
/
i
pour
sélectionner un e et de transition entre
les photos dans un diaporama.
h
Vitesse Utilisez les touches
I
/
i
pour
sélectionner la vit
esse de dé lement des
photos dans un diaporama.
3. Appuyez sur la touche RETURN (
O
) pour
quitter l’a chage à l’écran.
Écoute de musique pendant un
diaporama
Vous pouvez a cher des  chiers photo
pendant l’écoute de  chiers musicaux.
1. Appuyez sur la touche
HOME MENU
2. Sélectionnez l’option [Photo] ou
[Home Link] à l’aide des touches
U
/
u
/
I
/
i
,
puis appuyez sur ENTER (
).
3. Sélectionnez l’option [Disque] ou [USB] à
l’
aide des touches
I
/
i
, puis appuyez sur
ENTER (
).
Pour le menu [Home Link], vous devez
sélectionner un serveur ou un dossier
partagé.
4. Sélectionnez un  chier à l’aide des touches
U
/
u
/
I
/
i
, puis appuyez sur ENTER (
) pour
a cher la photo.
5. Appuyez sur la touche DISPLAY (
) pour
a cher le menu des options.
HB985-DB.BDEUPPK_FRE.indd 52HB985-DB.BDEUPPK_FRE.indd 52 2010-05-14  1:54:282010-05-14  1:54:28
53
Utilisation
4
Utilisation
6. Utilisez les touches
U
/
u
pour sélectionner
l’option [Sélect. musique], et appuyez sur
ENTER ( ) pour a cher le menu
[Sélect. musique].
7. Utilisez les touches
U
/
u
pour sélectionner
un pér
iphérique, puis appuyez sur
ENTER ( ).
Les périphériques que vous pouvez
sélectionner varient selon l’emplacement du
chier photo que vous a chez en plein écran.
Emplacement
des photos
Périphériques
disponibles
Disque Disque, USB
USB Disque, USB
Dossier partagé
sur votre
ordinateur (CIFS)
CIFS
Serveur DLNA Serveur DLNA
8.
Utilisez les touches
U
/
u
pour sélectionner
un  chier ou un dossier que vous voulez lire.
Sélectionnez un dossier et appuyez sur
ENTER ( ) pour a cher le répertoire de
niveau inférieur.
Sélectionnez
et appuyez sur ENTER
(
) pour a cher le répertoire de niveau
supérieur.
REMARQUE
Lorsque vous sélectionnez “music” dans [Home Link],
la sélection d’un dossier n’est pas possible. Seule la
sélection d’un  chier est possible dans [Home link].
9. Utilisez la touche
i
pour sélectionner [OK],
puis appuyez sur ENTER ( ) pour terminer
la sélection de la musique.
Écoute de musique
Ce lecteur peut lire les CD audio et les  chiers
musicaux.
1. Appuyez sur la touche
HOME MENU
2. Sélectionnez l’option [Musique] à l’aide des
touches
U
/
u
/
I
/
i
, puis appuyez sur ENTER
( ).
3. Sélectionnez le périphérique à l’aide des
touches
I
/
i
et appuyez sur la touche
ENTER ( ).
Lorsque vous connectez jusqu’à deux
périphériques, une illustration semblable à
celle ci-dessus apparaît à lécran.
4. Sélectionnez un  chier musical ou une piste
audio à l’aide des touches
U
/
u
/
I
/
i
, et
appuyez sur ENTER (
) pour lire la musique.
REMARQUE
Les impératifs concernant les  chiers sont
décrits page 11.
Vous pouvez utiliser di érentes fonctions de
lecture. Reportez-vous aux pages 40-47.
HB985-DB.BDEUPPK_FRE.indd 53HB985-DB.BDEUPPK_FRE.indd 53 2010-05-14  1:54:282010-05-14  1:54:28
54
Utilisation
Utilisation
4
Enregistrement de CD audio
Vous pouvez enregistrer une piste en
particulier ou toutes les pistes d’un CD audio
vers un périphérique de stockage USB.
1. Insérez un périphérique de stockage USB
dans le port USB à l’avant du lecteur.
2. Appuyez sur
Z
(OPEN/CLOSE) (ouverture/
fermeture) et placez un CD audio sur le
plateau.
Appuyez sur
Z
(OPEN/CLOSE) (ouverture/
fermeture) pour fermer le plateau. La lecture
démarre automatiquement.
3. Appuyez sur la touche DISPLAY (
) pour
a cher le menu des options.
Ou
Appuyez sur la touche
z
USB REC de la
télécommande.
Vous pouvez enregistrer plusieurs  chiers
de musique sur le CD audio.
4. Utilisez les touches
U
/
u
pour sélectionner
l’option [Enreg. CD] et appuyez sur ENTER
(
) pour a cher le menu [Enreg. CD].
Répétez l’opération pour sélectionner
autant de pistes que vous le souhaitez.
5. Utilisez les touches
U
/
u
pour sélectionner
une piste que vous voulez copier dans le
menu, puis appuyez sur ENTER (
).
Répétez l’opération pour sélectionner
autant de pistes que vous le souhaitez.
Sélectionne toutes les pistes
d’un CD audio.
Sélectionne une option
d’encodage dans le menu
contextuel (128 Kbit/s, 192 Kbit/
s, 320 Kbit/s ou Sans perte).
Annule l’enregistrement et
revient à l’écran précédent.
6. Utilisez les touches
U
/
u
/
I
/
i
pour
sélectionner [Démarrer] et appuyez sur la
touche ENTER (
).
7. Utilisez les touches
U
/
u
/
I
/
i
pour
sélectionner le dossier cible à copier.
Si vous voulez créer un nouveau dossier,
utilisez les touches
U
/
u
/
I
/
i
pour
sélectionner [Nouveau dossier] et appuyez
sur ENTER ( ).
Saisissez un nom de dossier à l’aide du
clavier virtuel, sélectionnez [OK] et appuyez
sur la touche ENTER ( ).
8. Utilisez les touches
U
/
u
/
I
/
i
pour
sélectionner [OK] et appuyez sur ENTER
(
) pour commencer l’enregistrement du
CD audio.
Pour interrompre l’enregistrement du CD
audio, sélectionnez [Annuler] et appuyez
sur la touche ENTER ( ).
9. Un message apparaît lorsque l’extraction
du CD audio est terminée. Appuyez sur la
touche ENTER (
) pour véri er le  chier
musical créé dans le dossier cible.
HB985-DB.BDEUPPK_FRE.indd 54HB985-DB.BDEUPPK_FRE.indd 54 2010-05-14  1:54:292010-05-14  1:54:29
55
Utilisation
4
Utilisation
REMARQUE
Le tableau ci-dessous donne en exemple la
durée moyenne d’enregistrement d’une piste
audio de 4 minutes vers un  chier musical à
192 Kbit/s.
À l’arrêt Pendant la lecture
1,4 min. 2 min.
Les durées indiquées dans le tableau ci-dessus
sont des estimations.
La durée d’extraction réelle pour un
périphérique USB varie selon les caractéristiques
de ce dernier.
Avant d’enregistrer sur le périphérique de
stockage USB, assurez-vous que l’espace
disponible est d’au moins 50 Mo.
Lenregistrement ne fonctionnera que si les
chiers musicaux ont une durée supérieure à 20
secondes.
N’éteignez pas ce lecteur ou ne retirez pas
le périphérique de stockage USB connecté
pendant l’enregistrement d’un CD audio.
La réalisation de copies non autorisées d’un
contenu protégé contre la copie, notamment
un programme informatique, un  chier, une
émission ou un enregistrement sonore, peut être
une violation des droits d’auteur et constitue une
infraction criminelle.
Cet appareil ne doit pas être utilisé à de telles  ns.
Assumez vos responsabilités.
Respectez les droits d’auteur.
HB985-DB.BDEUPPK_FRE.indd 55HB985-DB.BDEUPPK_FRE.indd 55 2010-05-14  1:54:292010-05-14  1:54:29
56
Utilisation
Utilisation
4
Lecture de l’iPod
Vous pouvez écouter la musique de votre iPod
sur votre Home Cinema. Pour plus de détails
sur l’iPod, consultez le guide utilisateur iPod.
Préparation
Pour visionner les vidéos et photos
présentes sur l’iPod sur l’écran de votre TV.
- Assurez-vous d’utilisez la connexion vidéo
avec la prise VIDEO OUT sur le panneau
arrière de l’ampli. Sélectionnez le mode
d’entrée vidéo sur la TV.
- Selon votre modèle d’iPod, assurez-vous
de sélectionnez Vidéos > Réglages vidéo
puis de régler la sortie TV sur Ask ou sur On
sur votre iPod.
Pour plus de détails sur les réglages vidéo,
consultez le guide utilisateur iPod.
- La visualisation de photos est disponible
uniquement si l’ampli est en mode iPod
IN et vous pourrez seulement voir les
photos en diaporama. Vous devez ouvrir
un diaporama sur votre iPod pour voir une
photo sur la TV. Pour plus de détails au
sujet des diaporamas, consultez le guide
utilisateur iPod.
Avant de brancher l’iPod, éteignez le et
réduisez le volume au minimum.
1. Raccordez fermement votre iPod.
Raccordez votre iPod
Raccordez le sabot
et placez votre iPod
dessus.
2. Sélectionnez un  chier à l’aide de
U
/
u
/
I
/
i
puis appuyez sur ENTER (
) pour écouter le
chier.
A chage de l’iPod à l’écran
1. Raccordez fermement votre iPod.
2. Appuyez sur la touche HOME MENU (
).
3. Sélectionnez [Musique] ou [Film] à l’aide de
I
/
i
, puis appuyez sur ENTER ( ).
SI un autre équipement (lecteur CD
ou périphérique USB) est connecté,
sélectionnez l’iPod dans le menu.
4. Sélectionnez un contenu à l’aide des
touches
U
/
u
/
I
/
i
, puis appuyez sur ENTER
(
).
HB985-DB.BDEUPPK_FRE.indd 56HB985-DB.BDEUPPK_FRE.indd 56 2010-05-14  1:54:292010-05-14  1:54:29
57
Utilisation
4
Utilisation
Pro tez de votre iPod en mode
in iPod IN
Vous pouvez commander les fonctions de
votre iPod à l’aide de la télécommande fournie.
1. Raccordez fermement votre iPod.
En mettant cet appareil sous tension, votre
iPod se met automatiquement en marche
et le rechargement débute.
2. Appuyez sur INPUT/TUNER pour
sélectionnez le mode iPod IN.
U
/
u
/
I
/
i
sélectionne une option dans le
menu.
B
/ENTER
démarre la lecture de musique
ou vidéo.
X
marque une pause lors de
la lecture. Pour reprendre la
lecture, appuyez à nouveau sur
B
(PLAY).
m
/
M
avance rapide ou retour rapide
d’une chanson ou d’une vidéo.
.
/
>
passe la lecture d’une piste
d’avant en arrière.
REPEAT Appuyez sur la touche REPEAT
pour sélectionner le mode de
répétition souhaité: Piste
( )
,
Tous
( )
, O (Pas d’a chage).
REMARQUE
Cet appareil est compatible avec le son et la vidéo
de l’iPod (4e génération), l’iPod nano, l’iPod classic,
l’iPod mini, l’iPod touch et l’iPhone.
(L’iPod shu e nest pas pris en charge.)
REMARQUE
Un message d’erreur “CHECK IPOD” ou
“Connected iPod model is not supported”
(« ce modèle d’iPod nest pas pris en charge »)
apparaît lorsque :
- Votre iPod nest pas approprié pour la fonction
à e ectuer.
Un message d’erreur “CHECK IPOD” ou “Please
update iPod’s software (« Veuillez mettre le
logiciel de l’iPod à jour » apparaît lorsque :
- Votre iPod a une ancienne version du logiciel.
t
Mettez à jour le logiciel de votre iPod en
téléchargeant la dernière version.
Si le lecteur a che un message d’erreur, suivez
les instructions de ce message. Un message
d’erreur “CHECK IPOD” ou “Please check your
iPod. (« Veuillez véri er votre iPod ») apparaît
lorsque :
- La communication entre le lecteur et votre
iPod a échoué.
t
Retirez puis reposez votre iPod sur le
support du lecteur.
- Votre iPod nest pas correctement connecté.
- Le lecteur ne reconnaît pas votre iPod.
- La batterie de votre iPod est très faible.
t
La batterie doit être rechargée.
t
Si vous chargez la batterie alors que la
batterie est au plus bas, le rechargement
peut prendre plus de temps.
Vous devez utilisez l’adaptateur dock fournit
avec votre iPod pour une utilisation régulière.
Si vous avez besoin d’un adaptateur, consultez
votre revendeur iPod.
La compatibilité avec votre iPod peut varier
selon le type d’iPod.
L’iPod touch et l’iPhone ont un mode de
fonctionnement di érent de celui de l’iPod.
Vous pouvez avoir besoin d’une commande
supplémentaire pour les utiliser sur le lecteur.
(ex : « image à débloquer »)
Si vous utilisez une application, e ectuez un
appel, ou envoyez ou recevez un SMS, etc. sur
un iPod touch ou un iPhone, détachez-le du
support iPod dock du lecteur pour l’utiliser.
Selon la version de votre logiciel iPod, il peut y
avoir une impossibilité de contrôler votre iPod
depuis le lecteur. Nous vous recommandons
d’installer la dernière version du logiciel.
La qualité vidéo dépend des sources vidéo sur
votre iPod.
Si vous rencontrez un problème avec votre iPod,
veuillez visiter le site
http://www.apple.com/support/ipod
HB985-DB.BDEUPPK_FRE.indd 57HB985-DB.BDEUPPK_FRE.indd 57 2010-05-14  1:54:292010-05-14  1:54:29
58
Utilisation
Utilisation
4
Utilisation de la
fonction Radio
Véri ez que l’antenne est raccordée.
(Voir page 24)
Pour écouter la radio
1.
Appuyez sur INPUT/TUNER jusqu’à ce
que l’indication Tuner (FM) apparaisse sur
l’a chage du panneau frontal. Le syntoniseur
se règle sur la dernière station radio écoutée.
2. Appuyez sur la touche TUNE (-/+) et
maintenez-la enfoncée pendant environ
deux secondes, jusqu’à ce que l’indication
de fréquence commence à changer. La
recherche des stations s’arrête lorsque
le syntoniseur de l’appareil a trouvé une
station radio. Ou Appuyez de façon répétée
sur la touche TUNE (-/+).
3. Pour régler le volume, tournez le bouton
VOLUME situé sur le panneau frontal de
l’appareil, ou utilisez la touche VOL (+/- ) de
la télécommande.
Mémorisation des stations radio
Vous pouvez présélectionner 50 stations en
FM. Avant de commencer, veillez à baisser le
volume.
1. Appuyez sur INPUT/TUNER jusqu’à ce que
l’indication TUNER (FM) apparaisse sur
l’a chage du panneau frontal.
2. Sélectionnez la fréquence souhaitée à l’aide
de la touche TUNE (-/+).
3. Appuyez sur la touche ENTER (
) ; un
numéro apparaît sur l’a chage du panneau
frontal.
4. Appuyez sur la touche PRESET pour
sélectionner le numéro souhaité.
5. Appuyez sur la touche ENTER (
). La station
est mémorisée.
6. Répétez les étapes 2 à 5 pour mémoriser
d’autres stations.
Suppression de toutes les
stations préréglées
Appuyez sans relâcher sur la touche CLEAR
pendant deux secondes. Lindication “E acer
tout” clignote. Appuyez sur CLEAR. Toutes les
stations préréglées sont alors supprimées.
Amélioration de la réception FM
Appuyez sur la touche de couleur bleue D (ST/
MONO) de la télécommande. Le syntoniseur
passe du mode stéréo au mode mono, ce qui
permet d’améliorer la qualité de réception en
cas de mauvaise réception.
A cher les informations de la
station de radio
Le syntoniseur FM béné cie de la technologie
RDS (Radio Data System). Elle fournit des
informations sur la station de radio que vous
écoutez. Appuyez de manière répétée sur la
touche RDS pour a cher tour à tour les types
de données suivantes :
PS (nom de la station radio)
A che le nom de la station radio
PTY (reconnaissance du type de
programme)
A che le type de programme
(par ex : Jazz ou Actualités).
RT (texte radio)
A che des informations spéciales
publiées par la station radio. Ce
texte peut dé ler à l’a chage.
CT (horloge radio)
A che l’heure et la date telles
qu’envoyées par la station radio.
HB985-DB.BDEUPPK_FRE.indd 58HB985-DB.BDEUPPK_FRE.indd 58 2010-05-14  1:54:292010-05-14  1:54:29
59
Utilisation
4
Utilisation
Lecture de contenu
via votre réseau
domestique
Ce lecteur peut parcourir et lire les contenus
stockés sur votre ordinateur et vos serveurs
multimédia certi és DLNA connectés à votre
réseau domestique.
À propos des fonctions DLNA
Ce lecteur est un lecteur multimédia
numérique certi é DLNA pouvant a cher et
lire des contenus vidéo, photo et musicaux à
partir de votre serveur multimédia numérique
compatible DLNA (ordinateurs et produits
électroniques grand public).
La Digital Living Network Alliance (DLNA)
est un organisme intersectoriel regroupant
des fabricants d’appareils électroniques
grand public, d’ordinateurs personnels et de
périphériques mobiles. Digital Living permet
aux consommateurs de partager facilement
des contenus multimédia numériques via un
réseau à domicile.
Le logo de certi cation DLNA permet
d’identi er facilement les produits conformes
aux directives d’interopérabilité DLNA.
Cet appareil est conforme aux directives
d’interopérabilité DLNA v1.5.
Si un ordinateur exécutant le logiciel serveur
DLNA ou tout autre périphérique compatible
DLNA est connecté à ce lecteur, certaines
modi cations des paramètres du logiciel
ou d’autres périphériques seront peut-être
nécessaires. Pour plus d’informations, reportez-
vous au manuel d’utilisation du logiciel ou du
périphérique.
Accès à un serveur multimédia
DLNA
1. Véri er la connexion et les paramètres
réseau (voir pages 28-30).
2. Appuyez sur la touche
HOME MENU.
3. Sélectionnez l’option [Home Link] à l’aide
des touches
U
/
u
/
I
/
i
, puis appuyez sur
ENTER (
).
4. Sélectionnez un serveur multimédia DLNA
dans la liste à l’aide des touches
U
/
u
, puis
appuyez sur ENTER (
).
Si vous voulez réanalyser le serveur
multimédia disponible, appuyez sur la
touche de couleur verte (B).
REMARQUE
En fonction du serveur multimédia, le lecteur aura
peut-être besoin d’une autorisation du serveur.
5. Sélectionnez un  chier à l’aide des touches
U
/
u
/
I
/
i
, puis appuyez sur ENTER ( ) pour
lire le  chier.
HB985-DB.BDEUPPK_FRE.indd 59HB985-DB.BDEUPPK_FRE.indd 59 2010-05-14  1:54:292010-05-14  1:54:29
60
Utilisation
Utilisation
4
REMARQUE
Les impératifs concernant les  chiers sont
décrits page 11.
Vous pouvez utiliser di érentes fonctions de
lecture. Reportez-vous aux pages 40-47.
Les impératifs concernant les  chiers indiqués
page 11 ne sont pas toujours compatibles.
Il se peut qu’il y ait des restrictions selon les
fonctionnalités des  chiers et la capacité du
serveur multimédia.
La vignette des  chiers incompatibles peut
apparaître dans le menu [Home Link], mais ces
chiers ne peuvent pas être lus sur ce lecteur.
Si le menu [Home Link] comporte un  chier
musical incompatible, le lecteur l’ignore et lit le
chier suivant.
Le nom du  chier de sous-titres et celui du
chier vidéo doivent être identiques et les
chiers doivent se trouver dans le même dossier.
La qualité de lecture et de fonctionnement du
menu [Home Link] peut être a ectée par les
conditions de votre réseau domestique.
Il se peut que les  chiers des supports
amovibles (clés USB, lecteur de DVD, etc.) sur
votre serveur multimédia ne soient pas partagés
correctement.
Accès à un dossier partagé de
votre ordinateur
1. Démarrez votre ordinateur connecté à votre
réseau local.
2. Sur votre ordinateur, partagez les dossiers
qui contiennent des  chiers musicaux,
photo ou vidéo.
3. Sur le lecteur, véri ez les réglages et la
connexion réseau (voir pages 28-30).
4. Appuyez sur la touche
HOME MENU.
5. Sélectionnez l’option [Home Link] à l’aide
des touches
U
/
u
/
I
/
i
, puis appuyez sur
ENTER (
).
6. Sélectionnez un dossier partagé dans la
liste à l’aide des touches
U
/
u
, puis appuyez
sur ENTER (
).
Si vous souhaitez rechercher à nouveau les
serveurs multimédia disponibles, appuyez
sur la touche de couleur verte (B).
REMARQUE
En fonction du dossier partagé, il est possible que
vous deviez saisir un identi ant utilisateur réseau et
un mot de passe pour pouvoir accéder à ce dossier.
7. Sélectionnez un  chier à l’aide des touches
U
/
u
/
I
/
i
, puis appuyez sur ENTER ( ) pour
lire le  chier.
HB985-DB.BDEUPPK_FRE.indd 60HB985-DB.BDEUPPK_FRE.indd 60 2010-05-14  1:54:302010-05-14  1:54:30
61
Utilisation
4
Utilisation
REMARQUE
Les impératifs concernant les  chiers sont
décrits page 11.
V
ous pouvez utiliser di érentes fonctions de
lecture. Reportez-vous aux pages 40-47.
La vignette des  chiers incompatibles peut
apparaître dans le menu [Home Link], mais ces
chiers ne peuvent pas être lus sur ce lecteur.
Si le menu [Home Link] comporte un  chier
musical incompatible, le lecteur l’ignore et lit le
chier suivant.
Le nom du  chier de sous-titres et celui du
chier vidéo doivent être identiques et les
chiers doivent se trouver dans le même dossier.
La qualité de lecture et de fonctionnement du
menu [Home Link] peut être a ectée par les
conditions de votre réseau domestique.
Il se peut que les  chiers des supports amovibles
(clés USB, lecteur de DVD, etc.) sur votre
ordinateur ne soient pas partagés correctement.
En fonction de l’environnement de votre
ordinateur, il est possible que vous rencontriez
des problèmes de connexion.
Con guration minimale requise de
l’ordinateur
Windows® XP (Service Pack 2 ou ultérieur),
Windows Vista® (aucun Service Pack requis)
Windows 7®
Processeur Intel® Pentium® III à 1,2 GHz ou
AMD Sempron™ 2200+
Environnement réseau : Ethernet 100 Mbit/
s, réseau local sans  l (IEEE 802.11b/g/n)
REMARQUE
Si vous utilisez Windows® XP ou Windows Vista®,
cliquez sur le lien correspondant ci-dessous pour
obtenir plus d’informations sur les paramètres de
partage de  chiers.
HB985-DB.BDEUPPK_FRE.indd 61HB985-DB.BDEUPPK_FRE.indd 61 2010-05-14  1:54:302010-05-14  1:54:30
62
Utilisation
Utilisation
4
Saisie de l’identi ant utilisateur
réseau et du mot de passe
En fonction de l’environnement de votre
ordinateur, il est possible que vous deviez
saisir un identi ant utilisateur réseau et un mot
de passe pour pouvoir accéder à un dossier
partagé.
1. Le menu clavier apparaît automatiquement
si l’ID utilisateur et le mot de passe du
réseau sont requis.
2. Utilisez
U
/
u
/
I
/
i
pour sélectionner un
caractère, puis appuyez sur ENTER (
)
pour con rmer votre sélection sur le menu
clavier.
Pour saisir une lettre accentuée,
sélectionnez d’abord la lettre, puis accédez
au jeu de caractères étendu.
Exemple: sélectionnez “D, puis appuyez sur
la touche DISPLAY ( ) pour a cher le jeu
de caractères étendu. Utilisez les touches
I
/
i
pour sélectionner “D” ou “Ď” et appuyez
sur ENTER ( ).
[E acer] e ace tous les caractères saisis.
[Espace] – insère un espace à l’emplacement
du curseur.
[<–] – supprime le caractère situé à gauche
du curseur.
[ABC / abc / #+-=&] – modi e le réglage
du clavier pour activer les majuscules, les
minuscules ou les symboles.
3. Lorsque vous avez terminé de saisir
l’identi ant utilisateur réseau et le mot de
passe, sélectionnez [OK] à l’aide des touches
U
/
u
/
I
/
i
et appuyez sur ENTER (
) pour
accéder au dossier.
Une fois que vous aurez accédé au dossier,
l’identi ant utilisateur réseau et le mot
de passe seront mémorisés pour plus de
commodité. Si vous ne voulez pas que
l’identi ant utilisateur réseau et le mot de
passe soient mémorisés, appuyez sur la
touche de couleur rouge (A) pour décocher
la case [Mémoriser] avant d’accéder au
dossier.
HB985-DB.BDEUPPK_FRE.indd 62HB985-DB.BDEUPPK_FRE.indd 62 2010-05-14  1:54:302010-05-14  1:54:30
63
Entretien
5
Entretien
Remarque sur les
disques
Manipulation des disques
Ne jamais coller de papier ou de ruban adhésif
sur le disque.
Stockage des disques
Après la lecture, rangez le disque dans son
boîtier. N’exposez pas les disques aux rayons
directs du soleil ou de sources de chaleur et
ne les laissez jamais dans une voiture garée en
plein soleil.
Nettoyage des disques
N’utilisez pas de solvants puissants comme
l’alcool, le benzène, les diluants, les nettoyants
utilisés dans le commerce, ou des sprays
antistatiques destinés aux vieux disques
vinyles.
Manipuler le lecteur
Lors de l’expédition du lecteur
Veuillez garder le carton d’expédition d’origine
et les matériaux d’emballage. Si vous avez
besoin d’expédier l’appareil, pour une
protection maximale, ré-emballez le lecteur
comme il était à la sortie de l’usine.
Maintenez la surface du lecteur propre.
N’utilisez pas de liquides volatils tels que du
spray insecticide près du lecteur.
Essuyer en appuyant fortement peut
endommager la surface de l’appareil.
Ne laissez pas de produits en caoutchouc
ou en plastique en contact avec le lecteur
pour une longue période.
Nettoyer le lecteur
Pour nettoyer le lecteur, utilisez un chi on
doux et sec. Si les surfaces sont très sales,
utilisez un chi on doux légèrement humidi é
avec une solution détergente neutre. N’utilisez
pas de solvants puissants tels que l’alcool,
du benzène ou du diluant qui pourraient
endommager la surface du lecteur.
Entretien du lecteur
Le lecteur est un appareil de précision haute
technologie. Si le bloc optique incorporé
ou les pièces du lecteur de disques sont
sales ou usées, la qualité de l’image pourrait
être diminuée. Pour plus de détails, veuillez
contacter le service autorisé le plus proche.
5
Entretien
HB985-DB.BDEUPPK_FRE.indd 63HB985-DB.BDEUPPK_FRE.indd 63 2010-05-14  1:54:302010-05-14  1:54:30
64
Dépannage
Dépannage
6
6
Dépannage
Général
L’appareil nest pas sous
tension.
Branchez le cordon d’alimentation sur la prise murale.
La lecture ne démarre pas. Insérez un disque approprié. (Véri ez le type de disque, le
système de couleur et le code régional).
Placez le disque face de lecture vers le bas.
Placez le disque correctement sur le plateau de disque.
Nettoyez le disque.
Annuler la fonction d’évaluation ou changez le niveau
d’évaluation.
L’angle ne peut pas être
changé.
Plusieurs angles de vue ne sont pas enregistrés sur le DVD
vidéo en cours de lecture.
La langue des sous-titres
ne peut être changée ou
désactivée.
Les sous-titres ne sont pas enregistrés sur le DVD vidéo en
cours de lecture.
Les  chiers MP3/WMA/
JPEG/DivX ne peuvent être
lus.
Les  chiers ne sont pas enregistrés dans un format pouvant
être lu par le lecteur.
Le lecteur ne prend pas en charge le codec du  chier vidéo.
La télécommande
ne fonctionne pas
correctement.
La télécommande nest pas dirigée vers le capteur de
l’appareil.
La télécommande est trop loin de l’unité.
Il y a un obstacle sur le chemin de la télécommande du
lecteur.
Les piles de la télécommande sont épuisées.
HB985-DB.BDEUPPK_FRE.indd 64HB985-DB.BDEUPPK_FRE.indd 64 2010-05-14  1:54:302010-05-14  1:54:30
65
Dépannage
6
Dépannage
Image
Il n’y a pas d’image. Sélectionnez le mode d’entrée vidéo approprié sur le
téléviseur de sorte que l’image de l’appareil apparaisse à
l’écran du téléviseur.
Enfoncez correctement les branchements vidéo.
Véri ez que l’option sélectionnée dans [Rég. couleur HDMI]
dans le menu [Con g.] correspond à votre connexion vidéo.
Il est possible que votre téléviseur n’accepte pas la résolution
que vous avez dé nie sur le lecteur. Sélectionnez une
résolution acceptée par votre téléviseur.
La prise de sortie HDMI OUT du lecteur est raccordée à un
appareil DVI qui ne prend pas en charge la protection des
droits d’auteur.
Présence de bruits
parasites sur l’image.
Vous essayez de lire un disque enregistré dans un système
couleur di érent de celui de votre téléviseur.
Sélectionnez une résolution acceptée par votre téléviseur.
Son
Il n’y a aucun son ou le son
est déformé.
L’appareil est en balayage, mouvement lent ou en mode
pause.
Le volume du son est bas.
Véri ez la connexion du câble de haut-parleur. (page 16)
HB985-DB.BDEUPPK_FRE.indd 65HB985-DB.BDEUPPK_FRE.indd 65 2010-05-14  1:54:302010-05-14  1:54:30
66
Dépannage
Dépannage
6
Réseau
La fonctionnalité BD-LIVE
ne fonctionne pas.
Le périphérique de stockage USB connecté ne contient pas
su samment despace. Raccordez un périphérique USB
ayant au moins 1 Go d’espace libre.
Veillez à ce que l’appareil soit correctement connecté au
réseau local et puisse accéder à internet (voir page 28).
Votre débit n’est peut-être pas su samment élevé pour
utiliser les fonctionnalités BD-LIVE. Contactez votre
fournisseur d’accès à Internet pour augmenter votre débit.
Loption [Connexion BD-LIVE] du menu [Con g.] est dé nie
sur [Interdite]. Réglez cette option sur [Autorisée].
La conception et les spéci cations sont sujettes à modi cation sans préavis.
Mises à jour
Notez que les informations sur ce produit sont disponibles sur le site Web de Pioneer.
Recherchez sur le site Web des informations sur les mises à jour et l’entretien de votre lecteur
Blu-ray Disc.
HB985-DB.BDEUPPK_FRE.indd 66HB985-DB.BDEUPPK_FRE.indd 66 2010-05-14  1:54:302010-05-14  1:54:30
67
Annexe
7
Annexe
Commande d’un
téléviseur à l’aide de la
télécommande fournie
Vous pouvez commander votre PIONEER
téléviseur à l’aide des touches ci-dessous.
Touches de
commande
du téléviseur
Touche Utilisation
1
(TV Power)
Allumer ou éteindre le
téléviseur.
INPUT Choisir la source d’entrée
entre le téléviseur et
d’autres sources.
CH +/-
Passer d’une chaîne à l’autre.
VOL +/- Régler le volume du
téléviseur.
REMARQUE
Selon l’appareil raccordé, il se peut que vous ne
puissiez pas commander votre téléviseur à l’aide de
certaines de ces touches.
Réglage de la télécommande
pour commander votre
téléviseur
Vous pouvez piloter votre téléviseur à l’aide de
la télécommande fournie.
Si votre téléviseur est répertorié dans le tableau
ci-dessous, indiquez le code approprié qui
correspond au fabricant.
1. Tout en maintenant la touche
1
(TV
POWER) enfoncée, entrez le code fabricant
de votre téléviseur avec les touches
numériques (voir le tableau ci-dessous).
Fabricant
Numéro de
code
Pioneer 1(par défaut)
Sony 2, 3
Panasonic 4, 5
Samsung 6, 7
LG 8, 9
2. Relâchez la touche
1
(TV POWER) pour
terminer le réglage.
Selon les téléviseurs, la totalité ou certaines
des touches de la télécommande peuvent
ne pas fonctionner avec le téléviseur, même
après avoir entré le code correct du fabricant.
Lorsque vous remplacez les piles de la
télécommande, il est possible que le numéro
de code que vous aviez dé ni soit rétabli aux
valeurs par défaut. Entrez le numéro de code
approprié de nouveau.
7
Annexe
HB985-DB.BDEUPPK_FRE.indd 67HB985-DB.BDEUPPK_FRE.indd 67 2010-05-14  1:54:302010-05-14  1:54:30
68
Annexe
Annexe
7
Liste des codes de région
Choisissez un code de région dans cette liste.
Région Code Région Code Région Code Région Code
Afghanistan AF
Argentine AR
Australie AU
Autriche AT
Belgique BE
Bhoutan BT
Bolivie BO
Brésil BR
Cambodge KH
Canada CA
Chili CL
Chine CN
Colombie CO
Congo CG
Costa Rica CR
Croatie HR
République
tchèque CZ
Danemark DK
Équateur EC
Égypte EG
Salvador SV
Éthiopie ET
Fidji FJ
Finlande FI
France FR
Allemagne DE
Grande-Bretagne GB
Grèce GR
Groenland GL
Hong Kong HK
Hongrie HU
Inde IN
Indonésie ID
Israël IL
Italie IT
Jamaïque JM
Japon JP
Kenya KE
Koweït KW
Libye LY
Luxembourg LU
Malaisie MY
Maldives MV
Mexique MX
Monaco MC
Mongolie MN
Maroc MA
Népal NP
Pays-Bas NL
Antilles
néerlandaises AN
Nouvelle-Zélande NZ
Nigeria NG
Norvège NO
Oman OM
Pakistan PK
Panama PA
Paraguay PY
Philippines PH
Pologne PL
Portugal PT
Roumanie RO
Russian
Russie RU
Arabie Saoudite SA
Sénégal SN
Singapour SG
Slovaquie SK
Slovénie SI
Afrique du Sud ZA
Corée du Sud KR
Espagne ES
Sri Lanka LK
Suède SE
Suisse CH
Taiwan TW
Thaïlande TH
Turquie TR
Ouganda UG
Ukraine UA
États-Unis US
Uruguay UY
Ouzbékistan UZ
Vietnam VN
Zimbabwe ZW
HB985-DB.BDEUPPK_FRE.indd 68HB985-DB.BDEUPPK_FRE.indd 68 2010-05-14  1:54:312010-05-14  1:54:31
69
Annexe
7
Annexe
Liste des codes de langue
Utilisez cette liste a n de sélectionner la langue de votre choix pour les réglages initiaux suivants :
[Audio], [Sous-titres] et [Menu disque].
Langue Code Langue Code Langue Code Langue Code
Afar 6565
Afrikaans 6570
Albanais 8381
Amharique 6577
Arabe 6582
Arménien 7289
Assamais 6583
Aymara 6588
Azéri 6590
Bachkir 6665
Basque 6985
Bengali 6678
Bhoutanais 6890
Bihari 6672
Breton 6682
Bulgare 6671
Birman 7789
Biélorusse 6669
Chinois 9072
Croate 7282
Tchèque 6783
Danois 6865
Néerlandais 7876
Anglais 6978
Espéranto 6979
Estonien 6984
Féroïen 7079
Fidjien 7074
Finnois 7073
Français 7082
Frison 7089
Galicien 7176
Géorgien 7565
Allemand 6869
Grec 6976
Groenlandais 7576
Guarani 7178
Goudjrati 7185
Haoussa 7265
Hébreu 7387
Hindi 7273
Hongrois 7285
Islandais 7383
Indonésien 7378
Interlingue 7365
Irlandais 7165
Italien 7384
Japonais 7465
Kannada 7578
Kashmiri 7583
Kazakh 7575
Kirghiz 7589
Coréen 7579
Kurde 7585
Laotien 7679
Latin 7665
Lette, letton 7686
Lingala 7678
Lituanien 7684
Macédonien 7775
Malgache 7771
Malais 7783
Malayalam 7776
Maori 7773
Marathe 7782
Moldave 7779
Mongol 7778
Nauruan 7865
Népalais 7869
Norvégien 7879
Oriya 7982
Pendjabi 8065
Pachtou 8083
Perse 7065
Polonais 8076
Portugais 8084
Quechua 8185
Rhéto-roman 8277
Roumain 8279
Russe 8285
Samoan 8377
Sanskrit 8365
Gaélique écossais
7168
Serbe 8382
Serbo-croate 8372
Shona 8378
Sindhi 8368
Singhalais 8373
Slovaque 8375
Slovène 8376
Espagnol 6983
Soudanais 8385
Swahili 8387
Suédois 8386
Tagalog 8476
Tadjik 8471
Tamoul 8465
Télougou 8469
Thaï 8472
Tonga 8479
Turc 8482
Turkmène 8475
Twi 8487
Ukrainien 8575
Ourdou 8582
Ouzbek 8590
Vietnamien 8673
Volapük 8679
Galois 6789
Wolof 8779
Xhosa 8872
Yiddish 7473
Yoruba 8979
Zoulou 9085
HB985-DB.BDEUPPK_FRE.indd 69HB985-DB.BDEUPPK_FRE.indd 69 2010-05-14  1:54:312010-05-14  1:54:31
70
Annexe
Annexe
7
Résolution de la sortie vidéo
Lorsque le support lu n’est pas protégé contre la copie
Sortie vidéo
Résolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connecté HDMI déconnecté
576i (480i) 576p (480i) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 720p
1080i 1080i 1080i
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 1080i
1080p / 50 Hz 1080p / 50 Hz 576i (480i) 1080i
Lorsque le support lu est protégé contre la copie
Sortie vidéo
Résolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connecté HDMI déconnecté
576i (480i) 576p (480p) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 576i (480i) 576p (480p)
1080i 1080i 576i (480i) 576p (480p)
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 576p (480p)
1080p / 50 Hz 1080p / 50 Hz 576i (480i) 576p (480p)
Connexion HDMI OUT
Pour le réglage de résolution 576i (480i),
la résolution de sortie réelle HDMI OUT
passera à 576p (480p).
Si vous sélectionnez une résolution
manuellement, puis raccordez la prise HDMI
au téléviseur, mais que votre téléviseur
ne la prend pas en charge, le réglage de
résolution est dé ni sur [Auto].
Si vous sélectionnez une résolution non
prise en charge par votre téléviseur, un
message d’avertissement apparaîtra.
Après modi cation de la résolution, si
rien n’apparaît à l’écran, attendez 20
secondes pour que la résolution revienne
automatiquement au réglage précédent.
La fréquence d’image de sortie vidéo 1080p
peut être dé nie automatiquement sur
24 Hz ou 50 Hz en fonction de la capacité
et de la préférence du téléviseur raccordé,
ainsi que de la fréquence d’image vidéo
native du contenu du BD-ROM.
Connexion COMPONENT VIDEO OUT
Le format BD ou DVD peut empêcher
l’extrapolation en sortie analogique.
Connexion VIDEO OUT
La résolution de la prise de sortie VIDEO OUT
est toujours réglée sur 576i (480i).
HB985-DB.BDEUPPK_FRE.indd 70HB985-DB.BDEUPPK_FRE.indd 70 2010-05-14  1:54:312010-05-14  1:54:31
71
Annexe
7
Annexe
“Blu-ray Disc” et sont des marques de
commerce.
Le logo “BD-LIVE” est une marque commerciale de
l’association “Blu-ray Disc.
“BONUSVIEW est une marque commerciale de
l’association Blu-ray Disc.
Java et toutes les marques commerciales et les
logos Java sont des marques commerciales ou des
marques déposées de Sun Microsystems, Inc. aux
États-Unis et/ou dans d’autres pays.
Fabriqué sous licence de Dolby Laboratories.
Dolby et le sigle double D sont des marques
commerciales de Dolby Laboratories.
Fabriqué sous licence des brevets américains
suivants : 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 et autres licences américaines
et d’autres pays publiées ou en attente.
DTS et le Symbole sont des marques déposées.
Les logos DTS-HD, DTS-HD Master Audio l Essential
et DTS sont des marques de DTS, Inc. Le produit
inclut des logiciels. © DTS, Inc. Tous droits réservés.
HDMI, le logo HDMI et High-De nition Multimedia
Interface sont des marques commerciales ou des
marques déposées de HDMI Licensing, LLC aux
États-Unis et dans d’autres pays.
Le logo est une marque commerciale de
DVD Format/Logo Licensing Corporation.
TM
DLNA et DLNA CERTIFIED sont des marques
commerciales et / ou des marques de service
Digital Living Network Alliance
DivX est une marque déposée de DivX, Inc., et son
utilisation est couverte par une licence.
“x.v.Color ou “x.v.Colour” est une marque de
commerce de Sony Corporation.
Marques de commerce et licences
HB985-DB.BDEUPPK_FRE.indd 71HB985-DB.BDEUPPK_FRE.indd 71 2010-05-14  1:54:312010-05-14  1:54:31
72
Annexe
Annexe
7
AVCHD” et le logo AVCHD” sont des marques
commerciales de Panasonic Corporation et Sony
Corporation.
Ce produit est sous licence des portefeuilles
de brevets AVC et VC-1 pour une utilisation
domestique personnelle et non commerciale
pour (i) encoder un contenu vidéo en conformité
avec les standards AVC et VC-1 (“AVC/VC-1 Video”)
et/ou (ii) décoder un contenu vidéo AVC/VC-1
encodé par un utilisateur à titre personnel et
non commercial et/ou obtenu d’un fournisseur
de contenu vidéo béné ciant d’une licence
l’autorisant à distribuer un contenu vidéo AVC/VC-
1. Aucune licence nest accordée explicitement
ou implicitement pour aucun autre usage. Des
informations supplémentaires peuvent être
obtenues au sujet de MPEG LA, LLC. Voir le site
Web : http://www.mpegla.com.
iPod est une marque commerciale d’Apple Inc.,
enregistrée aux États-Unis et dans d’autres pays.
iPhone est une marque commerciale d’Apple Inc.
Les accessoires électroniques portant la mention
« Made for iPod » ont été conçus pour fonctionner
avec un iPod et sont certi és conformes aux
exigences d’Apple par le fabricant.
Les accessoires électroniques portant la mention
« Works with iPhone » ont été conçus pour
fonctionner avec un iPhone et sont certi és
conformes aux exigences d’Apple par le fabricant.
Apple nest pas responsable pour le
fonctionnement de cet appareil ou de sa
compatibilité avec les normes réglementaires et
de sécurité.
Windows Media est une marque déposée ou une
marque commerciale de Microsoft Corporation aux
États-Unis et / ou dans d’autres pays.
Ce produit inclut une technologie appartenant à
Microsoft Corporation et ne peut pas être utilisé ni
distribué sans licence de Microsoft Licensing, Inc.
®
La technologie sans  l Bluetooth® est un système
qui permet un contact radio entre équipements
électroniques dans un rayon de 10 mètres maximum.
La connexion de périphériques individuels en
employant la technologie sans  l Bluetooth nentraîne
aucune charge supplémentaire. Vous pouvez faire
fonctionner un téléphone mobile équipé de la
technologie sans  l Bluetooth via la Cascade si la
connexion a été réalisée au moyen de la technologie
sans  l Bluetooth.
Le mot servant de marque et les logos Bluetooth sont
la propriété de Bluetooth SIG, Inc. et toute utilisation
de telles marques par Pioneer Corporation s’e ectue
sous licence. Les autres marques commerciales
et noms de commerces appartiennent à leurs
propriétaires respectifs.
HB985-DB.BDEUPPK_FRE.indd 72HB985-DB.BDEUPPK_FRE.indd 72 2010-05-14  1:54:312010-05-14  1:54:31
73
Annexe
7
Annexe
Caractéristiques
Général
Puissance électrique requise:
AC 220-240 V, 50/ 60 Hz
• Consommation électrique:
150 W
En mode veille : inférieur à 0.5 W
Dimensions (L x H x P):
Env. 430 × 64 × 304 mm
Poids net (Env.):
3.6 kg
Température de fonctionnement:
41 °F à 95 °F (5 °C à 35 °C)
• Humidité relative:
5 % à 90 %
• Alimentation USB:
DC 5 V
500 mA
Entrées/ Sorties
• VIDEO OUT:
1,0 V (p-p), 75 Ω, synchro négative, RCA jack x 1
• COMPONENT VIDEO OUT:
(Y) 1,0 V (pp), 75 Ω, synchro négative, RCA jack x 1,
(Pb)/(Pr) 0.7 V (pp), 75 Ω, RCA jack x 2
HDMI OUT (vidéo/audio):
19 pin (norme HDMI, Type A, Version 1.3)
Analogiques audio IN:
2,0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DIGITAL IN (OPTICAL 1/2):
3 V (p-p), Optical jack x 2
• PORTABLE IN:
0,5 Vrms (sortie stéréo 3,5 mm)
Radio
• Plage FM:
87.5 à 108.0 MHz ou 87.50 à 108.00 MHz
Ampli cateur
Puissance de sortie (PEAK), (4Ω/3Ω)
Total 1100 W
Avant 180 W x 2
Centre 180 W
Arrière 180 W x 2
Subwoofer 200 W (Passive)
Puissance de sortie (RMS), THD 10% (4Ω/3Ω)
Total 930 W
Avant 150 W x 2
Centre 150 W
Arrière 150 W x 2
Sub-Woofer 180 W (Passive)
Système
• Laser:
Laser semiconducteur,
Longueur d’onde: 405 nm / 650 nm
Système de signal:
TV couleur NTSC/PAL standard
Réponse en fréquence:
20 Hz à 20 kHz (48 kHz, 96 kHz, 192 kHz
échantillonnage)
• Port LAN:
prise ethernet x 1, 10BASE-T/100BASE-TX
HB985-DB.BDEUPPK_FRE.indd 73HB985-DB.BDEUPPK_FRE.indd 73 2010-05-14  1:54:322010-05-14  1:54:32
74
Annexe
Annexe
7
Enceintes
BCS-707
S-BD707
Haut-parleur avant/enceintes satellites
(gauche/droite)
Type: 2 voie
Impédance nominale: 4 Ω
Dimensions nettes 260 x 1097 x 260 mm
(L x H x P):
Poids net: 3.8 kg
• Enceinte centrale
Type: 1 voie
Impédance nominale: 4 Ω
Dimensions nettes 300 x 87 x 65 mm
(L x H x P):
Poids net: 0.6 kg
S-BD707SW
Caisson de graves
Type: 1 voie 1 haut-parleur
Impédance nominale: 3 Ω
Dimensions nettes 130.5 x 420 x 375 mm
(L x H x P):
Poids net: 4.4 kg
Enceintes
BCS-303
S-BD303
Haut-parleur avant/enceintes satellites
(gauche/droite)
Type: 1 voie
Impédance nominale: 4 Ω
Dimensions nettes 96 x 96 x 85 mm
(L x H x P):
Poids net: 0.4 kg
• Enceinte centrale
Type: 1 voie
Impédance nominale: 4 Ω
Dimensions nettes 300 x 87 x 65 mm
(L x H x P):
Poids net: 0.6 kg
Caisson de graves
Type: 1 voie 1 haut-parleur
Impédance nominale: 3 Ω
Dimensions nettes 130.5 x 420 x 375 mm
(L x H x P):
Poids net: 4.4 kg
HB985-DB.BDEUPPK_FRE.indd 74HB985-DB.BDEUPPK_FRE.indd 74 2010-05-14  1:54:322010-05-14  1:54:32
75
Annexe
7
Annexe
Avis concernant les
logiciels open source
Les  chiers exécutables GPL et les bibliothèques
LGPL suivants utilisés dans ce produit sont sujets aux
accords de licence GPL2.0/LGPL2.1.
EXÉCUTABLES GPL: Linux kernel 2.6, bash, busybox,
cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils,
net-tools, procps, samba-3.0.25b, sysutils, tcpdump,
tftpd, tinylogin, unzip, utelnetd
BIBLIOTHÈQUES LGPL: uClibc, DirectFB, blow sh,
cairo,  mpeg, iconv, libusb, mpg123
BIBLIOTHÈQUE de licence publique gSOAP 1.3:
gsoap
Vous pouvez obtenir une copie du code source
correspondant en prenant les frais de distribution à
votre charge. Pour obtenir une copie, contactez votre
service client Pioneer local.
Vous pouvez obtenir une copie des licences
GPL et LGPL sur les sites http://www.gnu.org/
licenses/old-licenses/gpl-2.0.html et http://
www.gnu.org/licenses/old-licenses/lgpl-
2.1.html .
Vous pouvez aussi obtenir une copie de la licence
publique gSOAP sur
http://www.cs.fsu.edu/~engelen/license.html.
ce logiciel est basé en partie sur le travail du groupe
Independent JPEG Group Copyright © 1991-1998,
Thomas G. Lane.
Ce produit inclut :
boost C++ : Copyright © Beman Dawes 1999-2003
c-ares : Copyright © 1998 Massachusetts Institute
of Technology
curl : Copyright © 1996-2008 Daniel Stenberg
expat : Copyright © 2006 Expat maintainers
freetype : Copyright © 2003 The FreeType Project
(www.freetype.org).
jpeg : ce logiciel est basé en partie sur le travail du
groupe Independent JPEG Group Copyright
© 1991-1998, Thomas G. Lane.
mng : Copyright © 2000-2007 Gerard Juyn, Glenn
Randers-Pehrson
ntp : Copyright © David L. Mills 1992-2006
• OpenSSL
Le logiciel cryptographique écrit par Eric
Young (eay@cryptsoft.com).
Le logiciel écrit par Tim Hudson
(tjh@cryptsoft.com).
Le logiciel développé par OpenSSL Project
pour être utilisé dans la boîte à outils OpenSSL
(http://www.openssl.org).
png : Copyright © 2004 Glenn Randers-Pehrson.
portmap : Copyright © 1990 The Regents of the
University of California.
ptmalloc : Copyright © 2001-2006 Wolfram Gloger
UnitTest++ : Copyright © 2006 Noel Llopis et
Charles Nicholson
Le kit de développement logiciel UPnP :
Copyright © 2000-2003 Intel Corporation
• strace
Copyright © 1991, 1992 Paul Kranenburg
copyright © 1993 Branko Lankester
copyright © 1993 Ulrich Pegelow
copyright © 1995, 1996 Michael Elizabeth Chastain
copyright © 1993, 1994, 1995, 1996 Rick Sladkey
copyright © 1999,2000 Wichert Akkerman
xml2 : Copyright © 1998-2003 Daniel Veillard.
XML-RPC pour C/C++
Copyright © 2001 First Peer, Inc. Tous droits
réservés.
Copyright © 2001 Eric Kidd. Tous droits réservés.
zlib : Copyright © 1995-2002 Jean-Loup Gailly et
Mark Adler.
Tous droits réservés.
de ce logiciel et des  chiers de documentation
associés (le “Logiciel”) est autorisée à utiliser ce
Logiciel gratuitement et sans restriction, notamment,
mais sans s’y limiter, les droits d’utilisation, copie,
modi cation, fusion, publication, distribution, sous-
licence et/ou vente de copies du Logiciel, et à
attribuer les mêmes autorisations aux personnes
à qui ce Logiciel est fourni, conformément aux
conditions suivantes :
LE LOGICIEL EST FOURNI “EN L’ÉTAT, SANS AUCUNE
GARANTIE (EXPRESSE OU IMPLICITE) QUE CE SOIT,
NOTAMMENT MAIS SANS S’Y LIMITER, LES GARANTIES
DE QUALITÉ MARCHANDE, D’ADÉQUATION À UNE
FIN PARTICULIÈRE ET DE NON-TRANSGRESSION.
EN AUCUN CAS LES AUTEURS OU DÉTENTEURS
DES DROITS D’AUTEUR NE SAURONT ÊTRE TENUS
RESPONSABLES EN CAS DE RÉCLAMATION,
DOMMAGE OU AUTRE RESPONSABILITÉ DÉCOULANT
D’UN CONTRAT, D’UN DÉLIT OU AUTRE, EN RELATION
AVEC LE LOGICIEL, SON UTILISATION OU TOUTE
AUTRE MANIPULATION DE CE DERNIER.
HB985-DB.BDEUPPK_FRE.indd 75HB985-DB.BDEUPPK_FRE.indd 75 2010-05-14  1:54:322010-05-14  1:54:32
2 Sicherheitshinweise
Sicherheitshinweise
1
ACHTUNG
STROMSCHLAGGEFAHR
NICHT ÖFFNEN
ACHTUNG: UM DIE GEFAHR VON
STROMSCHLÄGEN ZU VERMEIDEN, DAS GEHÄUSE
(BZW. DIE RÜCKSEITE) NICHT ABNEHMEN UND/
ODER DAS GERÄT SELBST REPARIEREN. ES
BEFINDEN SICH KEINE BAUTEILE IM GERÄT, DIE
VOM BENUTZER REPARIERT WERDEN KÖNNEN.
REPARATUREN STETS VOM FACHMANN
AUSFÜHREN LASSEN.
Der Blitz mit der Pfeilspitze im
gleichseitigen Dreieck dient dazu,
den Benutzer vor unisolierten und
gefährlichen spannungsführenden
Stellen innerhalb des
Gerätegehäuses zu warnen, an
denen die Spannung groß genug
ist, um für den Menschen die
Gefahr eines Stromschlages zu
bergen.
Das Ausrufezeichen im
gleichseitigen Dreieck dient
dazu, den Benutzer auf
wichtige vorhandene Betriebs-
und Wartungsanleitungen
in der produktbegleitenden
Dokumentation hinzuweisen.
Vorsichts- und Warnhinweise
ACHTUNG: UM BRANDGEFAHR UND DIE GEFAHR
EINES STROMSCHLAGES ZU VERMEIDEN, SETZEN
SIE DAS GERÄT WEDER REGEN NOCH SONSTIGER
FEUCHTIGKEIT AUS.
ACHTUNG: Installieren Sie das Gerät nicht in einem
geschlossenen Raum, z. B. in einem Bücherregal oder
an einem ähnlichen Ort.
VORSICHT: Die Belüftungsö nungen niemals
verdecken. Das Gerät immer laut Herstellerangaben
anschließen.
Schlitze und Ö nungen im Gehäuse dienen der
Belüftung, gewährleisten einen störungsfreien
Betrieb des Gerätes und schützen es vor
Überhitzung. Ö nungen sollten niemals durch
Aufstellen des Gerätes auf einem Bett, Sofa, Teppich
oder ähnlichen Untergründen verdeckt werden.
Das Gerät sollte nicht z. B. in einem Bücherregal
oder Schrank aufgestellt werden, wenn keine
ausreichende Belüftung gewährleistet werden kann
oder die Anleitungen missachtet wurden.
VORSICHT: Dieses Produkt ist ein Laser-Produkt der
Klasse 1, das in der Sicherheits-Richtlinie für Laser-
Produkte, IEC 60825-1: 2007, klassi ziert ist.
Um das Gerät richtig zu verwenden, lesen Sie dieses
Benutzerhandbuch sorgfältig durch und bewahren
Sie es auf. Setzen Sie sich zur Wartung mit einem
quali zierten Servicebetrieb in Verbindung.
Durch Bedienungen, Einstellungen oder Verfahren,
die in diesem Handbuch nicht erwähnt werden,
können gefährliche Strahlungen verursacht werden.
Um direkten Kontakt mit dem Laserstrahl zu
vermeiden, darf das Gehäuse nicht geö net werden.
Ansonsten tritt sichtbare Laserstrahlung auf. NIEMALS
DIREKT IN DEN LASERSTRAHL BLICKEN.
1
Sicherheitshinweise
HB985-DB.BDEUPPK_GER.indd 2HB985-DB.BDEUPPK_GER.indd 2 2010-05-14  2:06:402010-05-14  2:06:40
Sicherheitshinweise
3Sicherheitshinweise
1
VORSICHTSHINWEISE zum Netzkabel
Die meisten Geräte sollten an einen eigenen
Stromkreis angeschlossen werden.
D. h. eine separate Steckdose ohne weitere
Anschlüsse oder Zweigleitungen, über die
ausschließlich dieses Gerät mit Strom versorgt wird.
Beachten Sie hierzu die technischen Daten des
Gerätes in diesem Benutzerhandbuch. Steckdosen
niemals überlasten. Bei überlasteten, lockeren oder
beschädigten Steckdosen, Verlängerungskabeln, bei
abgenutzten Kabeln oder beschädigter Isolierung
besteht die Gefahr von Stromschlägen oder Bränden.
Die Gerätekabel sollten regelmäßig überprüft
werden. Bei Beschädigungen oder Abnutzungen
der Kabel sofort den Netzstecker ziehen und das
Kabel von einem quali zierten Techniker durch ein
gleiches Modell austauschen lassen. Das Netzkabel
vor mechanischen Beschädigungen, schützen, wie
z. B. Verdrehen, Knicken, Eindrücken, Einklemmen in
einer Tür oder Darauftreten. Achten Sie besonders
auf die Stecker, Steckdosen und den Bereich, an dem
das Kabel aus dem Gerät austritt. Ziehen Sie zum
Unterbrechen der Stromversorgung den Netzstecker.
Achten Sie beim Aufstellen des Gerätes darauf, dass
der Netzstecker leicht erreichbar bleibt.
Hiermit erklärt PIONEER, dass diese(s)
Produkt(e) die grundlegenden
Anforderungen und die sonstigen
Bestimmungen der Richtlinien
2004/108/EC, 2006/95/EC und
2009/125/EC erfüllt/erfüllen.
ACHTUNG: Zur Vermeidung von Bränden keine
o enen Flammen auf das Gerät stellen (z. B. Kerzen).
Dieses Gerät besitzt eine tragbare Batterie oder
Akku-Batterie.
Sicherheitshinweise zum Herausnehmen
der Batterie aus dem Gerät: Führen Sie zum
Herausnehmen der alten Batterie bzw. das
Batteriepakets die Einzelschritte zum Einlegen der
Batterie in umgekehrter Reihenfolge durch. Um
eine Gefährdung der Umwelt sowie mögliche
Gesundheitsgefährdungen von Menschen und
Tieren zu vermeiden, sollten Altbatterien in einen
geeigneten Behälter einer Sammelstelle gegeben
werden. Altbatterien niemals zusammen mit dem
Hausmüll entsorgen. Bitte geben Sie Altbatterien an
einer kostenlosen Sammelstelle für Batterien und
Akku-Batterien ab. Die Batterie keiner extremen Hitze
aussetzen, wie z. B. direkte Sonneneinstrahlung,
Feuer o. ä.
VORSICHT: Das Gerät darf nicht mit Wasser (Tropf-
oder Spritzwasser) in Berührung kommen und es
sollten keine mit Flüssigkeit gefüllten Behälter auf
das Gerät gestellt werden, wie z. B. Vasen.
HB985-DB.BDEUPPK_GER.indd 3HB985-DB.BDEUPPK_GER.indd 3 2010-05-14  2:06:442010-05-14  2:06:44
4 Sicherheitshinweise
Sicherheitshinweise
1
Hinweise zur Sammlung und Entsorgung von
Altgeräten und verbrauchten Batterien
Diese Symbole auf den Geräten, Verpackungen und/
oder in der beigefügten Literatur weisen darauf hin,
dass diese elektrischen und elektronischen Geräte
sowie Batterien nicht mit dem normalen Hausmüll
entsorgt werden dürfen.
Zur ordnungsgemäßen Weiterverarbeitung,
Wiederaufbereitung und zum Recycling sollten
Altgeräte und verbrauchte Batterien gemäß den
geltenden Richtlinien bei einer vorgesehenen
Sammelstelle abgegeben werden.
Durch eine ordnungsgemäße Entsorgung solcher
Geräte und Batterien können wertvolle Ressourcen
geschont und negative Auswirkungen auf die
Gesundheit und die Umwelt vermieden werden.
Weitere Informationen zur Sammlung und
Wiederverwertung von Altgeräten und Batterien
erhalten Sie bei Ihrer Stadtverwaltung, bei Ihrem
Entsorgungsunternehmen oder beim Händler, bei
dem Sie das Gerät gekauft haben.
Diese Symbole sind nur in der Europäischen
Gemeinschaft gültig.
Länder außerhalb der Europäischen
Gemeinschaft:
Bitte wenden Sie sich zur ordnungsgemäßen
Entsorgung von Altgeräten und verbrauchten
Batterien an die jeweilige Stadtverwaltung oder an
Ihren Händler.
Hinweise zum Copyright
AACS (Advanced Access Content System) ist ein
gültiges System zum Schutz von Inhalten für
das BD-Format, ähnlich CSS (Content Scramble
System) für das DVD-Format. Für z. B. die
Wiedergabe oder den analogen Signalausgang
bei AACS-geschützten Inhalten können
bestimmte Einschränkungen festgelegt werden.
Die Bedienung und die Einschränkungen dieses
Gerätes können je nach Kaufdatum verschieden
sein, da solche AACS-Einschränkungen auch nach
der Herstellung des Gerätes übernommen und/
oder geändert werden können.
Des Weiteren wird das BD-ROM-Zeichen und BD+
mit bestimmten Einschränkungen als zusätzlicher
Schutz der Inhalte für das BD-Format verwendet,
einschließlich Wiedergabeeinschränkungen für
BD-ROM-Zeichen und/oder BD+ geschützte
Inhalte. Weitere Informationen zu AACS, zum BD-
ROM-Zeichen, BD+ oder zu diesem Gerät erhalten
Sie bei einem zugelassenen Kundendienst-Center.
Viele BD-ROM-/DVD-Discs sind mit einem
Kopierschutz versehen. Der Player sollte aus
diesem Grund stets direkt am Fernseher
angeschlossen werden, und nicht über einen
Videorekorder. Beim Anschluss über einen
Videorekorder kann das Bild kopiergeschützter
Discs verzerrt dargestellt werden.
Dieses Produkt verwendet eine durch US-Patente
und andere geistige Eigentumsrechte geschützte
Kopierschutz-Technologie. Für den Einsatz dieser
Kopierschutz-Technologie ist die Genehmigung
durch Rovi erforderlich. Der Einsatz ist ohne
zusätzliche Genehmigung von Rovi ausschließlich
für den Heimgebrauch und andere begrenzte
Vorführungen vorgesehen. Reverse Engineering
oder Zerlegung verboten.
Laut Urheberrecht in den USA und anderen
Ländern wird die unerlaubte Aufnahme,
Verwendung, Vorführung, der Vertrieb oder
die Überarbeitung von Fernsehprogrammen,
Videobändern, BD-ROM-Discs, DVDs, CDs
und anderen Datenträgern zivil- und/oder
strafrechtlich verfolgt.
Pb
(
Beispielsymbole
für Batterien
)
HB985-DB.BDEUPPK_GER.indd 4HB985-DB.BDEUPPK_GER.indd 4 2010-05-14  2:06:442010-05-14  2:06:44
Sicherheitshinweise
5Sicherheitshinweise
1
Wichtige Hinweise zur TV-Farbnorm
Die Farbnorm dieses Players richtet sich nach der
gerade wiedergegebenen Disc.
Wird auf diesem Player z. B. eine in der NTSC-
Farbnorm aufgenommene Disc wiedergegeben,
wird das Bild als NTSC-Signal ausgegeben.
Nur Multinorm-Farbfernseher können sämtliche
Bildsignale dieses Players anzeigen.
Falls Sie einen Fernseher mit PAL-Farbnorm
besitzen, wird das Bild bei der Wiedergabe von
Discs oder Video lmen im NTSC-Format verzerrt
angezeigt.
Dieser Multinorm-Farbfernseher ändert die
Farbnorm je nach Eingangssignal automatisch.
Falls die Farbnorm nicht automatisch eingestellt
wird, schalten Sie das Gerät aus und wieder ein,
um das normale Fernsehbild anzuzeigen.
Auch wenn eine in der NTSC-Farbnorm
aufgenommene Disc störungsfrei auf dem
Fernsehgerät angezeigt wird, wird diese Disc
möglicherweise nicht korrekt mit dem Rekorder
beschrieben.
HB985-DB.BDEUPPK_GER.indd 5HB985-DB.BDEUPPK_GER.indd 5 2010-05-14  2:06:442010-05-14  2:06:44
6
Inhalt
1
Sicherheitshinweise
2 Vorsichts- und Warnhinweise
2
Vorbereitung
8 Einführung
8 Info über das Symbol auf
dem Bildschirm
8 Hinweis zu den verwendeten
Symbolen
9 Mitgeliefertes Zubehör
10 Spielbare Discs
11 Dateikompatibilität
12 Ländercode
12 AVCHD (Advanced Video
Codec High De nition)
12 Besondere
Systemanforderungen
12 Hinweise zur Kompatibilität
13 Fernbedienung
14 Vorderes Bedienfeld
15 Rückseite
3
Montage
16 Montage der Lautsprecher
16 Lautsprechereinstellungen
BCS-707
18 Lautsprechereinstellungen
BCS-303
19 Wandmontage des Mittel-
Lautsprechers
19 Zusätzliche Hinweise zum Standort
der Lautsprecher
20 Aufstellen des Systems
21 Anschluss an einen Fernseher
21 HDMI-Anschluss
22 Component-Video-Anschluss
23 Video-Anschluss
23 Einstellung der Au ösung
24 Antennenanschluss
24 Anschluss von Zusatzgeräten
24 AUX-Anschluss
25 PORTABLE IN-Anschluss
25 OPTICAL IN 1/2-Anschluss
26 Bluetooth®-Verbindung
28 Verbindung mit dem Heimnetzwerk
29 Netzwerkeinstellungen
31 Anschluss eines USB-Gerätes
32 Einstellungen
32 Setup-Einstellungen
vornehmen
33 Das Menü [ANZEIGE]
34 Das Menü [SPRACHE]
35 Das Menü [AUDIO]
36 Das Menü [SPERRE]
37 Das Menü [NETZWERK]
37 Das Menü [WEITERE]
39 Klange ekte
HB985-DB.BDEUPPK_GER.indd 6HB985-DB.BDEUPPK_GER.indd 6 2010-05-14  2:06:452010-05-14  2:06:45
7
1
2
3
4
5
6
7
8
4
Betrieb
40 Normale Wiedergabe
42 Erweiterte Wiedergabe
45 Bildschirmmenü
48 BD-LIVE-Discs anschauen
49 Wiedergabe von Filmdateien und VR-
Discs
51 Bilddateien anzeigen
53 Musik hören
56 Wiedergabe von einem iPod
58 Radiobetrieb
59 Wiedergabe über das Heimnetzwerk
5
Wartung
63 Hinweise zu Discs
63 Handhabung des Gerätes
6
Störungsbehebung
64 Allgemein
65 Bild
65 Ton
66 Netzwerk
7
Anhang
67 Bedienung eines Fernsehgerätes
über die mitgelieferte
Fernbedienung
68 Liste der Ländercodes
69 Liste der Sprachcodes
70 Video-Ausgabeau ösung
71 Marken und Lizenzen
73 Technische Daten
75 Hinweise zu Open Source-Software
HB985-DB.BDEUPPK_GER.indd 7HB985-DB.BDEUPPK_GER.indd 7 2010-05-14  2:06:452010-05-14  2:06:45
8 Vorbereitung
Vorbereitung
2
2
Vorbereitung
Einführung
Info über das Symbol auf
dem Bildschirm
Während des Betriebs erscheint auf dem
Fernsehbildschirm u. U. das Symbol und
zeigt an, dass die im Benutzerhandbuch
erläuterte Funktion für diese Disc nicht
verfügbar ist.
Hinweis zu den verwendeten
Symbolen
HINWEIS
Weist auf besondere Hinweise und
Betriebsmerkmale hin.
VORSICHT
Vorsichtshinweise zur Vermeidung möglicher
Beschädigungen.
Abschnitte, in deren Titel eines der folgenden
Symbole angegeben ist, sind nur für den
dargestellten Disc-Typ gültig.
BD
BD-ROM-Disc
DVD
DVD-Video, DVD±R/RW
im Video-Modus oder VR-
Modus und  nalisiert
AVCHD
DVD±R/RW im AVCHD-
Format
ACD
Audio-CDs
MOVIE
Filmdateien
MUSIC
Musikdateien
PHOTO
Fotodateien
HB985-DB.BDEUPPK_GER.indd 8HB985-DB.BDEUPPK_GER.indd 8 2010-05-14  2:06:452010-05-14  2:06:45
9Vorbereitung
2
Vorbereitung
Mitgeliefertes Zubehör
Videokabel (1) Fernbedienung (1)
Batterien (1) UKW-Antenne (1)
iPod-Dock (1)
Lautsprecherzubehör (S-BD707T)
Lautsprecherkabel (5)
Schrauben (12)
Lautsprecherständer-
Basis (4)
kleine rutschfeste
Unterlagen (1)
mittelgroße
rutschfeste
Unterlagen (1)
Lautsprecherzubehör (S-BD707SW)
Lautsprecherkabel
(1)
große rutschfeste
Unterlagen (1)
Lautsprecherzubehör (S-BD303)
Lautsprecherkabel
(6)
kleine rutschfeste
Unterlagen (1)
große rutschfeste
Unterlagen (1)
HB985-DB.BDEUPPK_GER.indd 9HB985-DB.BDEUPPK_GER.indd 9 2010-05-14  2:06:452010-05-14  2:06:45
10 Vorbereitung
Vorbereitung
2
Spielbare Discs
Blu-Ray-Discs
- Gekaufte oder ausgeliehene
Spiel lm-DVDs.
- BD-R/RE-Discs mit Film-, Musik-
oder Fotodateien.
DVD-VIDEO
8 / 12 cm
Gekaufte oder ausgeliehene
Spiel lm-DVDs.
DVD±R
8 / 12 cm
- Nur  nalisierte Discs im Video-
Modus
- Unterstützt auch Dual-Layer-
Discs
- AVCHD-Format,  nalisiert
- Finalized AVCHD format
- DVD±R-Discs mit Film-, Musik-
oder Fotodateien.
DVD-RW
8 / 12 cm
- Nur Discs im VR-Modus, Video-
Modus und  nalisierte Discs
- AVCHD-Format,  nalisiert
- DVD-RW-Discs mit Film-,
Musik- oder Fotodateien.
DVD+RW
8 / 12 cm
- Nur  nalisierte Discs im Video-
Modus
- AVCHD-Format
- AVCHD-Format,  nalisiert
- DVD+RW-Discs mit Film-,
Musik- oder Fotodateien.
Audio-CD
8 / 12 cm
CD-R/RW
8 / 12 cm
- CD-R/RW-Discs mit Audio-,
Film-, Musik- oder Fotodateien.
HINWEIS
Einige CD-R-/RW- (bzw. DVD±R-/RW-)
Discs können, abhängig vom verwendeten
Aufnahmegerät oder der CD-R-/RW-Disc (bzw.
DVD±R-/RW-Disc) selbst, mit diesem Gerät u. U.
nicht abgespielt werden.
Abhängig von der Aufnahmesoftware und
der Finalisierung können einige beschriebene
Discs (CD-R/RW, DVD±R/RW, BD-R/RE) nicht
wiedergegeben werden.
Mit einem PC oder einem DVD- oder
CD-Rekorder beschriebene BD-R/RE,
DVD±R/RW- oder CD-R/RW-Discs können
u. U. nicht abgespielt werden, falls die Disc
beschädigt oder verschmutzt ist oder die Linse
des Players verschmutzt oder kondensiert ist.
Falls eine Disc mit einem PC beschrieben wird,
auch in einem kompatiblen Aufnahmeformat,
können einige Discs auf Grund der Einstellungen
in der Brennsoftware nicht wiedergegeben
werden. (Genauere Informationen hierzu
erhalten Sie beim Hersteller der Brennsoftware.)
Für eine optimale Wiedergabequalität müssen
Discs und Aufnahmen bestimmte technische
Voraussetzungen erfüllen.
Bereits bespielte DVDs erfüllen diese
Voraussetzungen automatisch. Beschriebene
Discs können in einer Vielzahl verschiedener
Formate vorliegen (einschließlich CD-R-Discs
mit MP3- oder WMA-Dateien). Diese Formate
müssen zur Wiedergabe-Kompatibilität
bestimmte Voraussetzungen erfüllen.
Der Kunde sollte beachten, dass für das
Herunterladen von MP3-/WMA-Dateien
sowie Musikdateien aus dem Internet
eine Genehmigung erforderlich ist. Unser
Unternehmen erteilt solche Genehmigungen
nicht. Diese sollten immer vom Urheber selbst
eingeholt werden.
HB985-DB.BDEUPPK_GER.indd 10HB985-DB.BDEUPPK_GER.indd 10 2010-05-14  2:06:462010-05-14  2:06:46
11Vorbereitung
2
Vorbereitung
Dateikompatibilität
Allgemein
Mögliche Dateierweiterungen:
.jpg”, “.jpeg”, “.png”, “.avi”, “.divx, “.mpg”, “.mpeg”,
.mkv, “.mp4”, “.mp3”, “.wma, “.wav
Je nach DLNA-Server sind verschiedene
Dateierweiterungen verfügbar.
Bestimmte .wav”-Dateien werden von
diesem Gerät u. U. nicht unterstützt.
Der Dateiname darf maximal 180 Zeichen
lang sein.
Je nach Größe und Anzahl der Dateien kann
das L
esen der Disc einige Minuten dauern.
Maximale Anzahl Dateien/Ordner:
2 000 (Gesamtanzahl der Dat
eien und Ordner)
CD-R/RW, DVD±R/RW, BD-R/RE-Format:
ISO 9660+JOLIET, UDF und UDF Bridge-Format
FILM
Mögliche Au ösung:
1 920 x 1 080 (B x H) Bildpunkte
Abspielbare Untertitel: SubRip (.srt/.txt), SAMI
(.smi), SubStation Alpha (.ssa/.txt), MicroDVD
(.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
Das Format VobSub (.sub) wird für die
F
unktion [Home Link] nicht unterstützt.
Abspielbare Codecs: “DIVX3.xx
, “DIVX4.xx,
“DIVX5.xx, “XVID”, “DIVX6.xx” (nur normale
Wiedergabe), H.264/MPEG-4 AVC, MPEG1 SS,
MPEG2 PS, MPEG2 TS
Abspielbare Audioformate: “D
olby Digital”,
“DTS, “MP3”, “WMA, “AAC, “AC3”
Nicht alle WMA- und AAC-Audioformate
können auf diesem Gerät wiedergegeben
werden.
Abtastfrequenz:
32 kHz bis 48 kHz (WMA),
16 kHz bis 48 kHz (MP3)
Bitrate:
20 kbps bis 320 kbps (WMA),
32 kbps bis 320 kbps (MP3)
HINWEIS
HD-Filmdateien auf einer CD oder einem USB
1.0/1.1-Gerät werden u. U. nicht störungsfrei
wiedergegeben. Zur Wiedergabe von HD-
Filmdateien werden BD-, DVD- oder USB
2.0-Datenträger empfohlen.
Dieser Player unterstützt die Pro le H.264/MPEG-
4 AVC Main, High bei Stufe 4,1. Bei Dateien mit
höherer Stufe wird eine Warnmeldung auf dem
Bildschirm eingeblendet.
Mit diesem Player können keine mit GMC*1 oder
Qpel*2 aufgenommenen. Dies sind Verfahren
zur Video-Kodierung im MPEG4-Standard wie
DivX oder XVID.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter Pixel
MUSIK
Abtastfrequenz:
8 kHz bis 48 KHz (WMA),
11 kHz bis 48 kHz (MP3)
Bitrate:
8 kbps bis 320 kbps (WMA, MP3),
HINWEIS
Mit diesem Gerät können keine ID3-Tags einer
MP3-Datei angezeigt werden.
Die Gesamt-Wiedergabedauer wird für VBR-
Dateien u. U. nicht exakt auf dem Bildschirm
angezeigt.
FOTO
Empfohlene Dateigröße:
Unter 4000 x 3000 x 24 Bit/Pixel
Unter 3000 x 3000 x 32 Bit/Pixel
Unter 4 MByte/ le
Progressive sowie verlustfrei komprimierte
Fotodateien werden nicht unterstützt.
HB985-DB.BDEUPPK_GER.indd 11HB985-DB.BDEUPPK_GER.indd 11 2010-05-14  2:06:462010-05-14  2:06:46
12 Vorbereitung
Vorbereitung
2
Ländercode
Der Ländercode dieses Players ist auf der
Geräterückseite aufgedruckt. Es können
nur BD-ROM- oder DVD-Discs mit diesem
Ländercode oder mit dem Ländercode ALLE”
wiedergegeben werden.
AVCHD (Advanced Video Codec
High De nition)
Mit diesem Player können Discs im AVCHD-
Format wiedergegeben werden. Diese Discs
werden normalerweise zur Aufzeichnung
mit Camcordern eingesetzt.
Beim AVCHD-Format handelt es sich
um ein hochau ösendes digitales
Videokameraformat.
Das Format MPEG-4 AVC/H.264 ermöglicht
eine e zientere Komprimierung von
Bildern als mit einem konventionellen
Format zur Bildkomprimierung.
Bestimmte AVCHD-Discs verwenden das
Format “x.v.Colour”.
Mit diesem Player können AVCHD-Discs im
Format “x.v.Colour” wiedergegeben werden.
Je nach Zustand der Aufnahme können
bestimmte Discs im AVCHD-Format u. U.
nicht wiedergegeben werden.
Discs im AVCHD-Format müssen  nalisiert
werden.
“x.v.Colour” ermöglicht eine größere
Farbvielfalt als normale DVD-Camcorder-
Discs.
Besondere
Systemanforderungen
Für hochau ösende Video-Wiedergabe:
• High De nition-Anzeigegerät
mit COMPONENT- oder HDMI-
Eingangsbuchsen.
BD-ROM-Disc mit hochau ösendem Inhalt.
Für bestimmte Inhalte ist ein HDMI- oder
HDCP-fähiger DVI-Eingang am Anzeigegerät
erforderlich (wie von den Disc-Autoren
festgelegt).
Zum Hochkonvertieren normalau ösender,
kopiergeschützter DVDs ist ein HDMI- oder
HDCP-fähiger DVI-Eingang am Anzeigegerät
erforderlich.
Hinweise zur Kompatibilität
Da es sich bei BD-ROM-Discs um ein neues
Format handelt, können Probleme mit
bestimmten Discs, digitalen Anschlüssen
und andere Kompatibilitätsprobleme
auftreten. Bei Problemen mit der
Kompatibilität wenden Sie sich bitte an ein
zugelassenenes Kundendienst-Center.
Zur Darstellung von hochau ösenden
Inhalten und hochkonvertierten Standard-
DVDs ist möglicherweise ein HDMI-fähiger
Eingang oder ein HDCP-fähiger DVI-Eingang
am Anzeigegerät erforderlich..
Bei einigen BD-ROM- und DVD-Discs
sind bestimmte Funktionsbefehle oder
Merkmale u. U. nicht verfügbar.
Mit Hilfe eines USB-Gerätes können
bestimmte Disc-Information gespeichert
werden, einschließlich heruntergeladener
Online-Inhalte. Durch die verwendete
Disc wird festgelegt, wie lange diese
Informationen gespeichert werden.
HB985-DB.BDEUPPK_GER.indd 12HB985-DB.BDEUPPK_GER.indd 12 2010-05-14  2:06:462010-05-14  2:06:46
13Vorbereitung
2
Vorbereitung
Fernbedienung
1
2
3
• • • • • • • • •
a
• • • • • • • • •
1
(STANDBY/ON): Player ein-und
ausschalten.
Z
OPEN/CLOSE: Disc-Fach ö nen
und schließen.
INPUT/TUNER: Eingangsmodus
ändern.
BT AUDIO: Eingangsmodus sofort
auf BT AUDIO einstellen.
OPTICAL: Eingangsmodus auf
optisch direkt einstellen.
DISPLAY: Bildschirmmenü ein-/
ausblenden.
HOME MENU: [Hauptmenü]
ein-/ausblenden.
MENU: Disc-Menü aufrufen.
Pfeiltasten: Auswahl einer Option
im Menü.
ENTER: Annehmen einer
Menüauswahl.
TUNE (+/-): Einen gewünschten
Radiosender einstellen.
PRESET: Gespeicherten
Radiosender aufrufen.
• • • • • • • • •
b
• • • • • • • • •
O
RETURN: Gewünschten
Abschnitt wiederholen.
POPUP/TOP MENU: DVD-
Titelmenü bzw. BD-ROM-
Kontextmenü aufrufen, falls
vorhanden.
x
STOP: Wiedergabe anhalten.
B
PLAY: Wiedergabe starten.
X
PAUSE/STEP: Wiedergabe
unterbrechen.
.
/
>
SKIP: Zur/zum nächsten
bzw. vorherigen Datei/Track/
Kapitel springen.
m
/
M
SCAN: Suchlauf zurück
oder vor.
SPK LEVEL: Lautstärke des
gewünschten Lautsprechers
einstellen.
z
USB REC: Aufnahme einer
Audio-CD.
MUTE: Gerät stummschalten.
SOUND: Klangmodus auswählen.
VOL +/- : Lautstärke der
Lautsprecher einstellen.
• • • • • • • • •
c
• • • • • • • • •
Nummerntasten 0-9: Auswahl
von Aufzählungsoptionen in einem
Menü.
MARKER: Markiert einen Punkt
während der Wiedergabe.
SEARCH: Suchmenü ein-/
ausblenden.
REPEAT: Menü verlassen bzw.
Wiedergabe fortsetzen.
CLEAR: Eine Marke im Suchmenü
löschen bzw. eine Zi er bei der
Kennworteingabe löschen.
DIMMER: Beleuchtung des Gerätes
dimmen.
ZOOM: Menü Zoom aufrufen.
Farbtasten (A, B, C, D): Navigation
in den Menüs.
- Taste A (RDS): Radio-Daten-
System.
- Taste B (PTY): Programmart-
kennung einer RDS-Sendung
anzeigen.
- Taste C (PTY SEARCH):
Programmart suchen.
- Taste D: Auswahl Mono/Stereo
im UKW-Modus.
TV-Bedienungstasten: Siehe Seite
67.
SLEEP: Einstellen einer Zeitdauer
nach der das Gerät ausgeschaltet
wird.
Einlegen der Batterien
Nehmen Sie die
Batterieklappe auf der
Rückseite der Fernbedienung
ab und legen Sie eine R03-
Batterie mit der richtigen
Polung und ein.
HB985-DB.BDEUPPK_GER.indd 13HB985-DB.BDEUPPK_GER.indd 13 2010-05-14  2:06:462010-05-14  2:06:46
14 Vorbereitung
Vorbereitung
2
Vorderes Bedienfeld
a
Disc-Fach
b
Bedienungstasten
1
STANDBY/ON Netzschalter
Z
(OPEN/CLOSE)
FUNCTION
Auswahl einer Eingangsquelle oder
Funktion.
B
/
X
(PLAY / PAUSE)
x
(STOP)
.
/
>
(SKIP)
- TUNE + (Radiosender einstellen)
c
Fernbedienungs-Sensor
d
Anzeigefenster
e
PORTABLE IN
f
USB-Anschluss
g
Lautstärkeregelung
1
2
3 4 5 6 7
HB985-DB.BDEUPPK_GER.indd 14HB985-DB.BDEUPPK_GER.indd 14 2010-05-14  2:06:462010-05-14  2:06:46
15Vorbereitung
2
Vorbereitung
a
Netzkabel
Anschluss an eine Steckdose.
b
Lautsprecheranschlüsse
c
Kühlungslüfter
d
Antennenanschluss
e
VIDEO OUT
f
AUX (L/R) INPUT
g
COMPONENT VIDEO (Y P
B
P
R
)
AUSGANG (PROGRESSIVE SCAN)
h
OPTICAL 1(TV) / 2
i
iPod (24-polig)
Anschluss eines iPod-Dock.
j
HDMI OUT (Typ A, Version 1.3)
Anschluss an einen Fernseher mit HDMI-
Eingängen.
k
LAN-Anschluss
Rückseite
1 2 3 4 5
6 7 8 9 10 11
HB985-DB.BDEUPPK_GER.indd 15HB985-DB.BDEUPPK_GER.indd 15 2010-05-14  2:06:462010-05-14  2:06:46
16 Montage
Montage
3
Montage der
Lautsprecher
Lautsprechereinstellungen
BCS-707
Vorbereitung der Lautsprecher
1. Befestigen Sie die rutschfesten Unterlagen
an den Standfüßen der Lautsprecher, des
Subwoofers und des Mittel-Lautsprechers.
Für Lautsprecherstandfüße:
Befestigen Sie mit den enthaltenen
Klebestreifen vier mittelgroße Unterlagen an
jedem Lautsprecherstandfuß (Unterseite).
middle non-skid pads
mittelgroße rutschfeste Unterlagen
Für Subwoofer:
Befestigen Sie mit den enthaltenen
Klebestreifen vier große Unterlagen am
Standfuß des Subwoofers.
large non-skid pads
große rutschfeste Unterlagen
Für Mittel-Lautsprecher:
Befestigen Sie mit den enthaltenen
Klebestreifen vier kleine Unterlagen am
Standfuß des Mittel-Lautsprechers.
small non-skid pads
kleine rutschfeste
Unterlagen
2. Montieren Sie die Lautsprecherstandfüße
mit den enthaltenen Schrauben an den
Ständern.
Setzen Sie den Ständer auf den Standfuß
und befestigen Sie die kleinen Schrauben
an den Positionen, wie in der folgenden
Abbildung gezeigt. Die Lautsprecher
sollten in Richtung des Standfußes des
gleichschenkligen Dreiecks zeigen.
Rear
Front
Hinten
Vorn
3
Montage
HB985-DB.BDEUPPK_GER.indd 16HB985-DB.BDEUPPK_GER.indd 16 2010-05-14  2:06:472010-05-14  2:06:47
17Montage
3
Montage
3. Schließen Sie die Kabel am Player an.
Schließen Sie den weißen Stecker des
grauen Kabels an den Anschluss (+) und
den anderen Stecker an den Anschluss (–)
an. Um die Kabel am Player anzuschließen,
drücken Sie jeweils auf eine der
Anschlussklemmen auf der Rückseite, so
dass sich die Anschlüsse ö nen. Führen Sie
das jeweilige Kabel ein und lassen Sie die
Anschlussklemme wieder los.
VORSICHT
Es sollten ausschließlich die im Lieferumfang
dieses Systems enthaltenen Lautsprecher
angeschlossen werden.
Die enthaltenen Lautsprecher sollten nur an
den Verstärker dieses Systems angeschlossen
werden. Beim Anschluss an einen anderen
Verstärker besteht die Gefahr von Fehlfunktionen
oder Bränden.
Montage der vorderen und der
Surround-Lautsprecher
Befestigen Sie die vorderen und die
Surround-Lautsprecher mit der enthaltenen
Kunststo klemme. Befestigen Sie zwei
Schraubhaken in der Wand hinter dem
Lautsprecher. Führen Sie zur Stabilisierung des
Lautsprechers ein dickeres Seil um die Haken
und durch die Kunststo klemmen hindurch
(überprüfen Sie, ob das gesamte Gewicht des
Lautsprechers getragen werden kann). Prüfen
Sie nach der Montage, ob der Lautsprecher
fest sitzt.
thick cord
Plastic catch
Ausreichend dickes
Seil
Kunststo klemme
VORSICHT
Bei der Kunststo klemme handelt es sich um
kein Befestigungselement, d. h. der Lautsprecher
sollte nicht allein an der Klemme befestigt
von der Wand hängen. Zur Stabilisierung des
Lautsprechers muss ein Seil verwendet werden.
Pioneer übernimmt keine Haftung für
Verluste oder Schäden jeglicher Art, die auf
einen unsachgemäßen Zusammenbau,
eine unsachgemäße Montage, eine
unzureichende Tragfähigkeit der Montageorte,
eine missbräuchliche Verwendung oder
Naturkatastrophen zurückzuführen sind.
Achten Sie beim Aufstellen darauf, dass das
Gerät fest steht und vermeiden Sie möglichst
Standorte, an denen das Gerät im Falle einer
Naturkatastrophe (z. B. bei einem Erdbeben)
herunterfallen und Verletzungen verursachen
könnte.
Farbe (+)
Schwarz (-)
HB985-DB.BDEUPPK_GER.indd 17HB985-DB.BDEUPPK_GER.indd 17 2010-05-14  2:06:472010-05-14  2:06:47
18 Montage
Montage
3
Lautsprechereinstellungen
BCS-303
Vorbereitung der Lautsprecher
1. Befestigen Sie die rutschfesten Unterlagen
an den Lautsprecherstandfüßen.
Für die vorderen und Surround-
Lautsprecher:
Befestigen Sie mit den enthaltenen
Klebestreifen vier kleinen Unterlagen an
jedem Lautsprecherstandfuß (Unterseite).
samll non-skid pads
kleine rutschfeste Unterlagen
Für Subwoofer:
Befestigen Sie mit den enthaltenen
Klebestreifen vier große Unterlagen am
Standfuß des Subwoofers.
large non-skid pads
große rutschfeste Unterlagen
Für Mittel-Lautsprecher:
Befestigen Sie mit den enthaltenen
Klebestreifen vier kleine Unterlagen am
Standfuß des Mittel-Lautsprechers.
samll non-skid pads
kleine rutschfeste
Unterlagen
2. Schließen Sie die Kabel am Player an.
Schließen Sie den weißen Stecker des
grauen Kabels an den Anschluss (+) und
den anderen Stecker an den Anschluss (–)
an. Um die Kabel am Player anzuschließen,
drücken Sie jeweils auf eine der
Anschlussklemmen auf der Rückseite, so
dass sich die Anschlüsse ö nen. Führen Sie
das jeweilige Kabel ein und lassen Sie die
Anschlussklemme wieder los.
Farbe (+)
Schwarz (-)
HB985-DB.BDEUPPK_GER.indd 18HB985-DB.BDEUPPK_GER.indd 18 2010-05-14  2:06:472010-05-14  2:06:47
19Montage
3
Montage
Wandmontage des
Mittel-Lautsprechers
Der Mittel-Lautsprecher besitzt eine
Montageö nung, mit der der Lautsprecher an
der Wand montiert werden kann.
Vor der Montage
Das Lautsprechersystem ist sehr schwer.
Das Gewicht kann zu einer Lockerung der
Schrauben führen, und die Wand muss das
Gewicht der Lautsprecher tragen können.
Ansonsten könnten die Lautsprecher
herunterfallen. Die Wand muss über eine
ausreichende Stärke verfügen, so dass das
Gesamtgewicht der Lautsprecher getragen
werden kann. Nicht an Wänden aus Sperrholz
oder weichem Material befestigen.
Die Montageschrauben sind nicht im
Lieferumfang enthalten. Verwenden Sie
Schrauben, die für die Bescha enheit und
Tragfähigkeit der Wand geeignet sind.
VORSICHT
Falls Sie die Bescha enheit und Tragfähigkeit
Ihrer Wand nicht einschätzen können, ziehen Sie
einen Fachmann zu Rate.
Pioneer übernimmt keine Haftung für Unfälle
oder Schäden, die auf eine unsachgemäße
Montage zurückzuführen sind.
5 mm
10 mm
Mounting screw
(not supplied)
Montageschrauben
(nicht im
Lieferumfang
enthalten)
Zusätzliche Hinweise
zum Standort der
Lautsprecher
Stellen Sie die vorderen Haupt-Lautsprecher
links und rechts in gleichem Abstand zum
Fernsehgerät auf.
Vorsichtshinweise:
Blanke Lautsprecherkabel müssen
zusammengedreht und vollständig in die
Lautsprecheranschlüsse eingeführt werden.
Sollten die blanken Lautsprecherkabel
die Systemrückseite berühren, wird
möglicherweise die Sicherheitsvorrichtung
des Systems ausgelöst und das System
abgeschaltet.
Die vorderen, der mittlere und die Surround-
Lautsprecher dieses Systems sind magnetisch
abgeschirmt. Falls die Lautsprecher sehr
nahe am Fernsehgerät aufgestellt werden,
können Farbverfälschungen jedoch nicht
ausgeschlossen werden. Schalten Sie in einem
solchen Fall das Fernsehgerät aus und nach
etwa 15 bis 30 Minuten wieder ein. Sollten
die Farbverfälschungen weiterhin auftreten,
stellen Sie das Lautsprechersystem in größerer
Entfernung zum Fernsehgerät auf.
Der Subwoofer besitzt keine magnetische
Abschirmung und sollte daher nicht in der
Nähe eines Fernsehgerätes oder Monitors
aufgestellt werden. Magnetische Datenträger
(z. B. Disketten, Musik- oder Videokassetten)
sollten ebenfalls nicht in der Nähe des
Subwoofers aufbewahrt werden.
Die vorderen, die Surround-Lautsprecher
und der Subwoofer nicht an einer Wand oder
Decke befestigen. Die Lautsprecher könnten
herunterfallen und zu Verletzungen führen.
5 mm - 7 mm
HB985-DB.BDEUPPK_GER.indd 19HB985-DB.BDEUPPK_GER.indd 19 2010-05-14  2:06:482010-05-14  2:06:48
20 Montage
Montage
3
Aufstellen des Systems
Die folgende Abbildung zeigt die Aufstellung
des Systems am Beispiel. Die Abbildungen in
dieser Anleitung können vom tatsächlichen
Gerät abweichen und dienen lediglich zur
Beschreibung.
Ein optimaler Surround-Sound wird erreicht,
wenn alle Lautsprecher mit Ausnahme des
Subwoofers im gleichen Abstand von der
Zuhörerposition (
A
) aufgestellt werden.
A
B
D
E
F
A
A
A
A
A
G
C
A
Vorderer Lautsprecher links (L)/
B
Vorderer Lautsprecher rechts (R):
Stellen Sie die vorderen Lautsprecher neben
den Monitor oder Bildschirm und bündig mit
der Bildschirm äche auf.
C
Mittel-Lautsprecher:
Stellen Sie den Mittel-Lautsprecher ober- oder
unterhalb des Monitors oder Bildschirms auf.
D
Surround-Lautsprecher links (L)/
E
Surround-Lautsprecher rechts (R):
Stellen Sie diese Lautsprecher hinter der
Zuhörerposition und leicht nach innen
ausgerichtet auf.
F
Subwoofer:
Die Position des Subwoofers kann beliebig
gewählt werden, da niederfrequente Bässe nur
leicht direktional sind. Der Subwoofer sollte
jedoch bevorzugt in der Nähe der vorderen
Lautsprecher aufgestellt werden. Richten Sie
den Subwoofer leicht zur Raummitte aus, um
Wandre exionen zu vermeiden.
G
Gerät
VORSICHT
Achten Sie darauf, dass Kinder nicht ihre
Hände oder andere Gegenstände in die
*Lautsprecherö nung einführen.
*Lautsprecherö nung: Eine Aushöhlung im
Lautsprechergehäuse zum Erzeugen satter
Bässe.
Platzieren Sie den Mittel-Lautsprecher für Kinder
unzugänglich.
Ansonsten könnte der Lautsprecher
herunterfallen und Verletzungen und/oder
Sachschäden verursachen.
Die Lautsprecher enthalten magnetische
Bauteile. Aus diesem Grund können
Farbverfälschungen auf dem Bildschirm oder
PC-Monitor auftreten. Die Lautsprecher sollten
daher in ausreichendem Abstand zum Fernseher
oder PC-Monitor aufgestellt werden.
HB985-DB.BDEUPPK_GER.indd 20HB985-DB.BDEUPPK_GER.indd 20 2010-05-14  2:06:482010-05-14  2:06:48
21Montage
3
Montage
Anschluss an einen
Fernseher
Nehmen Sie, abhängig von den Möglichkeiten
Ihrer Geräte, einen der folgenden Anschlüsse
vor.
HDMI-Anschluss (Seite 21-22)
Component-Video-Anschluss (Seite 22)
Video-Anschluss (Seite 23)
HINWEIS
Abhängig vom Fernseher und anderen Geräten
gibt es verschiedene Anschlussmöglichkeiten
an den Player. Verwenden Sie nur einen der in
dieser Anleitung angegebenen Anschlüsse.
Lesen Sie zum Anschluss die Bedienungsanlei-
tung des Fernsehers, der Stereo-Anlage bzw. des
jeweiligen Gerätes.
Der Player muss direkt am Fernseher
angeschlossen werden. Stellen Sie den
Fernseher auf den richtigen Videokanal ein.
Den Player nicht über einen Videorekorder
anschließen. Das DVD-Bild könnte durch das
Kopierschutzsystem verzerrt werden.
HDMI-Anschluss
Ein HDMI-Fernseher oder Monitor kann über
ein HDMI-Kabel an diesen Player angeschlossen
werden (type A, Version 1.3). Verbinden Sie die
HDMI OUT
-Buchse des Players mit der HDMI
IN-Buchse eines HDMI-kompatiblen Fernsehers
oder Monitors.
HDMI-Anschluss
Player
TV
TV
Player
Stellen Sie den Eingang des Fernsehers
auf HDMI (siehe Bedienungsanleitung des
F
ernsehers).
HB985-DB.BDEUPPK_GER.indd 21HB985-DB.BDEUPPK_GER.indd 21 2010-05-14  2:06:482010-05-14  2:06:48
22 Montage
Montage
3
HINWEIS
Beim Ändern der Au ösung bei bereits
angeschlossenem Gerät können Fehlfunktionen
auftreten. Um diese Störung zu beheben,
schalten Sie den Player aus und wieder ein.
Wenn der HDMI-Anschluss noch nicht mir
dem HDCP abgeglichen wurde, erscheint ein
schwarzer Bildschirm. Überprüfen Sie in diesem
Fall den HDMI-Anschluss oder ziehen Sie das
HDMI-Kabel ab.
Überprüfen Sie bei Rauschen oder Streifen auf
dem Bildschirm das HDMI-Kabel (die Länge
sollte 4,5 m nicht überschreiten, zudem sollte
ein HDMI-Hochgeschwindigkeitskabel (Version
1.3) verwendet werden.
Falls ein angeschlossenes HDMI-Gerät den
Audioausgang des Players nicht unterstützt, ist
der Ton des HDMI-Gerätes u. U. nur verzerrt oder
nicht zu hören.
Bei einem HDMI-Anschluss kann die Au ösung
für den HDMI-Ausgang geändert werden. (Siehe
Kapitel “Einstellung der Au ösung” auf Seite 23.)
Legen Sie über die Option [HDMI-Farbeinst.] im
Menü [Setup] die Art der Videoausgabe über die
HDMI OUT-Buchse fest (siehe Seite 34).
Beachten Sie beim Anschluss eines HDMI- oder
DVI-kompatiblen Gerätes folgende Punkte:
- Schalten Sie das HDMI-/DVI-Gerät sowie diesen
Player aus. Schalten Sie dann das HDMI-/DVI-
Gerät ein, warten Sie ca. 30 Sekunden, und
schalten Sie dann den Player ein.
- Der Videoeingang des angeschlossenen
Gerätes muss auf dieses Gerät eingestellt sein.
- Das angeschlossene Gerät muss eine der
Video-Eingangsau ösungen 720x576p (480p),
1280x720p, 1920x1080i oder 1920x1080p
unterstützen.
Nicht alle HDCP-kompatiblen HDMI- oder DVI-
Geräte arbeiten mit diesem Player zusammen.
- Bei nicht-HDCP-Geräten wird das Bild nicht
richtig angezeigt.
- Es erfolgt keine Wiedergabe mit diesem Player
und es wird ein schwarzer Bildschirm angezeigt.
Component-Video-Anschluss
Verbinden Sie die COMPONENT VIDEO OUT-
Buchsen des Players über ein Y Pb Pr-Kabel
mit den entsprechenden Eingangsbuchsen
des Fernsehers. Der Ton wird über die
Systemlautsprecher ausgegeben.
Component-Anschluss
Player
TV
Green
Blue
Red
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Player
Grün
Blau
Rot
TV
HINWEIS
Bei einem COMPONENT VIDEO OUT-Anschluss
kann die Au ösung für den Ausgang geändert
werden. (Siehe Kapitel “Einstellung der Au ösung”
auf Seite 23.)
HB985-DB.BDEUPPK_GER.indd 22HB985-DB.BDEUPPK_GER.indd 22 2010-05-14  2:06:492010-05-14  2:06:49
23Montage
3
Montage
Video-Anschluss
Verbinden Sie die VIDEO OUT-Buchse des
Players über das Videokabel mit der Video-
Eingangsbuchse des Fernsehers. Der Ton wird
über die Systemlautsprecher ausgegeben.
Video-Anschluss
TV
Yellow
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Player
TV
Gelb
Einstellung der Au ösung
Der Player bietet verschiedene
Ausgabeau ösungen für die HDMI OUT-
und COMPONENT VIDEO OUT-Buchsen. Die
Au ösung wird im Menü [Setup] eingestellt.
1. Drücken Sie die Taste HOME MENU (
).
2. Wählen Sie mit den Tasten
I
/
i/U
/
u
den
Eintrag [Setup] und drücken Sie ENTER
(
). Daraufhin wird das Menü [Setup]
aufgerufen.
3. Wählen Sie mit den Tasten
U
/
u
die Option
[ANZEIGE] und drücken Sie die Taste
i
, um
in das Unterverzeichnis zu gelangen.
4. Wählen Sie mit den Tasten
U
/
u
den Eintrag
[Au ösung] und drücken Sie für die dritte
Ebene auf ENTER (
) oder auf
i
.
5. Wählen Sie mit den Tasten
U
/
u
die
gewünschte Au ösung aus und drücken
Sie zur Bestätigung der Auswahl auf
ENTER ( ).
HINWEIS
Falls Ihr Fernsehgerät die am Player eingestellte
Au ösung nicht unterstützt, stellen Sie die
Au ösung wie folgt auf 576p (480p) ein:
1. Drücken Sie zum Ö nen des Disc-Fachs auf
Z
.
2. Halten Sie die Taste
x
mindestens fünf
Sekunden lang gedrückt.
Die Videoausgabe ist von zahlreichen Faktoren
abhängig. Hinweise hierzu  nden Sie unter
Video-Ausgabeau ösung” auf Seite 70.
HB985-DB.BDEUPPK_GER.indd 23HB985-DB.BDEUPPK_GER.indd 23 2010-05-14  2:06:492010-05-14  2:06:49
24 Montage
Montage
3
Antennenanschluss
Schließen Sie zum Radioempfang die
mitgelieferte Antenne an.
Antennenanschluss
Player
Player
HINWEIS
Die UKW-Drahtantenne sollte nach dem Anschluss
so waagerecht wie möglich ausgerichtet werden.
Die UKW-Drahtantenne muss vollständig entfaltet
werden.
Anschluss von
Zusatzgeräten
AUX-Anschluss
Der Ton eines Gerätes kann mit Hilfe der
analogen Audio-Ausgangsbuchsen über
die Lautsprecher des Systems ausgegeben
werden.
Schließen Sie die analogen Audio-
Ausgangsbuchsen des Gerätes an den
Anschluss AUX L/R (INPUT) dieses Gerätes an.
Wählen Sie dann mit den Tasten INPUT/TUNER,
I
/
i
sowie ENTER (
) die Option [AUX].
AUX-Anschluss
Player
To the audio output jacks
of your component
(TV, VCR, etc.)
Red
White
PR
PB
Y
COMPONENT
VIDEO
INPUT
L
AUX
R
VIDEO
Rot
Weiß
Player
Zu den Audio-
Ausgangsbuchsen des
Gerätes (TV,
Videorekorder usw.)
HB985-DB.BDEUPPK_GER.indd 24HB985-DB.BDEUPPK_GER.indd 24 2010-05-14  2:06:502010-05-14  2:06:50
25Montage
3
Montage
PORTABLE IN-Anschluss
Der Ton eines tragbaren Players kann über
die Lautsprecher des Systems ausgegeben
werden.
Verbinden Sie die Kopfhörerbuchse (oder Line
Out-Buchse) des tragbaren Players mit der
PORT. IN-Buchse dieses Gerätes. Wählen Sie
dann mit den Tasten INPUT/TUNER,
I
/
i
sowie
ENTER (
) die Option [PORTABLE].
PORTABLE IN-Anschluss
twZGSGUUU
Z. B. MP3-Player.
OPTICAL IN 1/2-Anschluss
Der Ton eines Gerätes kann mit Hilfe der
digitalen, optischen Buchse über die
Lautsprecher des Systems ausgegeben
werden.
Verbinden Sie die optische Ausgangsbuchse
des Gerätes mit der OPTICAL IN 1/2-Buchse
dieses Gerätes. Wählen Sie dann mit den Tasten
INPUT/TUNER,
I
/
i
sowie ENTER (
) die
Option [OPTICAL 1/2]. Oder wählen Sie diese
Funktion direkt über die Taste OPTICAL aus.
Optischer Anschluss
To the digital
optical output jack
of your component
Zur digitalen,
optischen
Ausgangsbuchse des
Gerätes
HB985-DB.BDEUPPK_GER.indd 25HB985-DB.BDEUPPK_GER.indd 25 2010-05-14  2:06:502010-05-14  2:06:50
26 Montage
Montage
3
Bluetooth®-Verbindung
Über Bluetooth
Bluetooth® ist eine kabellose
Übertragungstechnologie zur Verbindung über
kurze Distanzen.
Die Übertragungsreichweite beträgt etwa
zehn Meter. (Bei Störungen durch andere
elektronische Geräte in der Nähe kann der
Ton bei der Bluetooth-Übertragung über
verschiedene Räume zeitweise unterbrochen
werden.)
Bei der Verbindung mehrere Geräte über
die Bluetooth Wireless-Technologie fallen
keinerlei Gebühren an. Verbindungen mit
Hilfe der Bluetooth Wireless-Technologie über
ein Mobiltelefon können in Reihenschaltung
betrieben werden.
Unterstützte Geräte: Mobiltelefone, MP3-Player,
Notebooks, PDA-Geräte (An diese Geräte muss
ein Stereo-Headset angeschlossen werden
können.)
Bluetooth-Pro le
Um die Bluetooth Wireless-Technologie zu
nutzen, müssen die Geräte mit bestimmten
Pro larten kompatibel sein.
Dieses Gerät unterstützt die folgenden Pro le.
A2DP (Advanced Audio Distribution Pro le
[Übertragung von Audiodaten])
Musik vom Bluetooth-Gerät hören
Verbindung zwischen Gerät und Bluetooth-
Gerät herstellen
Vor der Verbindung muss die Bluetooth-
Funktion Ihres Bluetooth-Gerätes aktiviert
werden. Hinweise  nden Sie in der
Bedienungsanleitung des Bluetooth-Gerätes.
Eine einmal hergestellte Verbindung muss
nicht nochmals hergestellt werden.
1. Wählen Sie mit der Taste INPUT/TUNER oder
BT AUDIO die Bluetooth-Funktion.
Daraufhin erscheint die Meldung “BT AUDIO”
gefolgt von “BT READY” im Anzeigefenster.
2.
Bedienen Sie das Bluetooth-Gerät
und stellen Sie eine Verbindung her.
Während der Suche nach diesem Gerät
mit dem Bluetooth-Gerät wird eine
Liste der gefundenen Geräte in der
Anzeige des Bluetooth-Gerätes, je nach
Funktionsumfang, angezeigt. Dieses Gerät
besitzt die Bezeichnung “PIONEER AUDIO”.
3. Geben Sie die PIN-Nummer ein.
PIN-Nummer: 0000
4. Nach erfolgter Verbindung dieses Gerätes
mit dem Bluetooth-Gerät leuchtet die
Bluetooth-LED dieses Gerätes auf und die
Meldung “BT SINK wird angezeigt.
HINWEIS
Je nach Art des Bluetooth-Gerätes erfolgt die
Herstellung der Verbindung auf verschiedene
Weise.
5. Musik hören.
Hinweise zur Wiedergabe von Musikdateien
auf dem Bluetooth-Gerät  nden Sie in
der Bedienungsanleitung des Bluetooth-
Gerätes.
HINWEIS
Falls die Bluetooth-Verbindung bei einem
Wechsel der Gerätefunktion getrennt wird, muss
diese neu hergestellt werden.
Das AVRCP-Pro l kann in dieser Betriebsart nicht
genutzt werden.
HB985-DB.BDEUPPK_GER.indd 26HB985-DB.BDEUPPK_GER.indd 26 2010-05-14  2:06:512010-05-14  2:06:51
27Montage
3
Montage
Informationen zum verbundenen
Bluetooth-Gerät anzeigen
Diese Funktion ist nach erfolgter Verbindung
möglich. Hier können verschiedene Bluetooth-
Informationen angezeigt werden.
Drücken Sie die Taste DISPLAY gedrückt.
Folgende Bluetooth-Informationen werden
nacheinander angezeigt. Lokale Adresse des
Lokale Adresse des Bluetooth-Gerätes
t
Gerätename
t
Keine
t
...
HINWEIS
Dieses Gerät unterstützt nicht das Pro l Mono-
Sprachausgabe per Headset (Schnurlose
Telefonie).
Bei Störungen der Übertragung durch andere
elektronische Geräte in der Nähe kann der Ton
zeitweise unterbrochen werden.
• Bluetooth-Geräte können nicht über dieses Gerät
bedient werden.
Es kann jeweils nur eine Verbindung zu einem
Bluetooth-Gerät hergestellt werden. Mehrfach-
Verbindungen sind nicht möglich.
Auch wenn das Bluetooth-Gerät und dieses Gerät
weniger als zehn Meter voneinander entfernt
sind, kann die Verbindung durch Hindernisse
zwischen den Geräten gestört werden.
Je nach Art des Gerätes kann die Bluetooth-
Funktion u. U. nicht genutzt werden.
Falls keine Verbindung zu einem Bluetooth-Gerät
besteht, erscheint die Meldung “BT READY” im
Anzeigefenster.
Bei Geräten in der Nähe, die auf derselben
Frequenz betrieben werden, wie z. B.
medizinische Geräte, Mikrowellengeräte oder
WLAN-Geräte, ist auf Grund elektronischer
Störungen möglicherweise keine Verbindung
möglich.
Bei zwischen den Geräten be ndlichen
Personen oder bei einer Unterbrechung der
Verbindung zwischen Bluetooth-Gerät und
Player wird die Verbindung getrennt.
Mit zunehmendem Abstand zwischen Bluetooth-
Gerät und Player nimmt die Tonqualität ab. Bei
zu großem Abstand außerhalb der Reichweite
des Bluetooth-Gerätes wird die Verbindung
getrennt.
Die Verbindung zu Geräten mit Bluetooth
Wireless-Technologie wird beim Ausschalten
des Hauptgerätes oder bei einem Abstand des
Gerätes zum Hauptgerät von über zehn Metern
getrennt.
HB985-DB.BDEUPPK_GER.indd 27HB985-DB.BDEUPPK_GER.indd 27 2010-05-14  2:06:512010-05-14  2:06:51
28 Montage
Montage
3
Verbindung mit dem
Heimnetzwerk
Dieser Player kann über den LAN-Anschluss
auf der Rückseite mit einem lokalen Netzwerk
(LAN) verbunden werden.
Weitere Hinweise  nden Sie in der
Bedienungsanleitung des Netzwerkgerätes.
Verbinden Sie den LAN-Anschluss des Players
über ein handelsübliches LAN- oder Ethernet-
Kabel (CAT5 oder höher mit RJ45-Anschluss)
mit dem entsprechenden Anschluss am
Modem oder Router. In der folgenden
Beispielkon guration für eine Kabelverbindung
kann mit dem Player auf die Inhalte beider PCs
zugegri en werden.
Netzwerkverbindung
Broadband
Service
Router
WAN
LAN 1
LAN 2
LAN 3
Player
PC
PC
Router
Breitband-
Dienst
Player
HINWEIS
Halten Sie das LAN-Kabel beim Anschließen
oder Abziehen immer am Stecker selbst fest.
Ziehen Sie nicht am LAN-Kabel und halten Sie
die Sperre am Stecker gedrückt.
Am LAN-Anschluss darf kein modulares
Telefonkabel angeschlossen werden.
Halten Sie sich auf Grund der zahlreichen
möglichen Anschlussarten an die Angaben Ihres
Telekommunikationsanbieters bzw. Internet-
Anbieters.
Für den Zugri auf Inhalte auf einem PC oder
DLNA-Server muss dieser Player mit demselben
lokalen Netzwerk wie der Router verbunden
sein.
HB985-DB.BDEUPPK_GER.indd 28HB985-DB.BDEUPPK_GER.indd 28 2010-05-14  2:06:512010-05-14  2:06:51
29Montage
3
Montage
Netzwerkeinstellungen
Vor der Einrichtung des Kabel-Netzwerks
muss eine Breitband-Internetverbindung zum
Heimnetzwerk hergestellt werden.
Falls das kabelgebundene lokale Netzwerk
(LAN) einen DHCP-Server besitzt, wird
dem Player automatisch eine IP-Adresse
zugewiesen. Für bestimmte Heimnetzwerke
müssen nach dem Anschluss der Kabel
die Netzwerkeinstellungen des Players
vorgenommen werden. Nehmen Sie die
[NETZWERK]-Einstellungen wie folgt vor.
1. Wählen Sie im Menü [Verbindungseinst.]
die Option [Setup] und drücken Sie auf
oder ENTER (
).
2. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
den IP-
Modus [Dynamisch] oder [Statisch].
Wählen Sie die Option [Dynamisch], um die
IP-Adresse automatisch zu beziehen.
HINWEIS
Falls kein DHCP-Server im Netzwerk vorhanden
ist und die IP-Adresse manuell eingerichtet
werden muss, wählen Sie die Option [Statisch]
und nehmen Sie die Einstellungen für [IP-Adresse],
[Subnetzmaske], [Gateway] und [DNS-Server] mit
den Tasten
U
/
u
/
I
/
i
sowie den Nummerntasten
vor. Drücken Sie bei falscher Eingabe einer Zi er
auf CLEAR, um den markierten Teil zu löschen.
3. Markieren Sie die Option [OK] und
drücken Sie ENTER ( ), um die
Netzwerkeinstellungen zu übernehmen.
4. Der Player fordert Sie zur Prüfung der
Netzwerkverbindung auf. Markieren Sie die
Option [OK] und drücken Sie ENTER (
),
um die Netzwerkverbindung herzustellen.
5. Wählen Sie den Eintrag [Test] und drücken
Sie bei Schritt 4 auf ENTER ( ), um den
Status der Netzwerkverbindung auf dem
Bildschirm anzuzeigen.
Der Test kann auch über die Option
[Verbindungsstatus] im Menü [Setup]
durchgeführt werden.
HB985-DB.BDEUPPK_GER.indd 29HB985-DB.BDEUPPK_GER.indd 29 2010-05-14  2:06:512010-05-14  2:06:51
30 Montage
Montage
3
Hinweise zur Netzwerkverbindung:
Viele Probleme bei der Netzwerkverbindung
während der Einrichtung können häu g
durch ein Zurücksetzen des Routers bzw.
Modems behoben werden. Schalten Sie
nach der Verbindung des Players mit
dem Heimnetzwerk den Router bzw. das
Kabelmodem des Heimnetzwerks schnell
aus und/oder trennen Sie das Netzkabel.
Schalten Sie das Gerät dann wieder ein
und/oder schließen Sie das Netzkabel
wieder an.
Je nach Vertragsbedingungen Ihres
Internet-Anbieters (ISP) kann die Anzahl der
Geräte, für die eine Internet-Verbindung
eingerichtet werden kann, begrenzt sein.
Hinweise erhalten Sie von Ihrem Internet-
Anbieter.
Unser Unternehmen übernimmt keine
Haftung für Fehlfunktionen des Players und/
oder der Internetverbindung auf Grund von
Verbindungsfehlern/Fehlfunktionen, die
durch Ihre Breitband-Internetverbindung
oder andere angeschlossene Geräte
verursacht werden.
Die über die Internetverbindung
angebotenen Funktionserweiterungen für
BD-ROM-Discs werden nicht von unserem
Unternehmen erzeugt oder zur Verfügung
gestellt, und unser Unternehmen
gewährleistet nicht die Funktionalität
oder künftige Verfügbarkeit dieser Inhalte.
Bestimmte über eine Internetverbindung
verfügbare Disc-Inhalte sind mit diesem
Player u. U. nicht kompatibel. Wenden Sie
sich bei Fragen zu solchen Inhalten bitte an
den Hersteller der Disc.
Für bestimmte Internet-Inhalte ist u. U. eine
höhere Bandbreite erforderlich.
Auch wenn der Player korrekt verbunden
und kon guriert ist können bestimmte
Internet-Inhalte auf Grund von Engpässen,
minderer Qualität oder geringer Bandbreite
der Internetverbindung oder Störungen
beim Anbieter nicht richtig wiedergegeben
werden.
Auf Grund bestimmter Einschränkungen
durch den Internet-Anbieter (ISP), der
die Breitband-Internetverbindung
bereitstellt, sind bestimmte Funktionen der
Internetverbindung u. U. nicht möglich.
Jegliche Entgelte des ISP, auch
Verbindungsentgelte, müssen vom
Benutzer selbst getragen werden.
Zur Kabelverbindung dieses Players ist ein
10 Base-T- oder 100 Base-TX-LAN-Anschluss
erforderlich. Falls Ihr Internet-Anbieter einen
solchen Anschluss nicht unterstützt, kann
mit dem Player keine Internetverbindung
hergestellt werden.
Für den xDSL-Dienst ist ein Router
erforderlich.
Zur Nutzung des DSL-Dienstes ist ein DSL-
Modem erforderlich. Für den Kabelmodem-
Dienst ist in ein Kabelmodem erforderlich.
Je nach Zugri sart auf den und den
Vertragsbedingungen des ISP können
Sie die Internetverbindungsfunktion
dieses Players nicht nutzen oder die
Anzahl der Geräte, die gleichzeitig eine
Internetverbindung herstellen können, ist
begrenzt. (Falls Ihr ISP nur die Verbindung
von einem Gerät zulässt, kann mit diesem
Player u. U. keine Verbindung hergestellt
werden, wenn bereits ein PC verbunden
ist.)
Der Einsatz eines “Routers” ist
möglicherweise nicht oder nur
eingeschränkt zulässig, abhängig von den
Bedingungen und Einschränkungen des
ISP. Hinweise erhalten Sie direkt von Ihrem
Internet-Anbieter.
Schalten Sie sämtliche nicht genutzte
Netzwerkgeräte im lokalen Heimnetzwerk
aus. Einige Geräte erzeugen u. U.
Netzwerkverkehr.
HB985-DB.BDEUPPK_GER.indd 30HB985-DB.BDEUPPK_GER.indd 30 2010-05-14  2:06:512010-05-14  2:06:51
31Montage
3
Montage
Anschluss eines USB-
Gerätes
Mit diesem Player können auf einem USB-Gerät
gespeicherte Film-, Musik- und Fotodateien
wiedergegeben werden.
1. Schließen Sie das USB-Gerät fest am USB-
Anschluss an.
USB-Anschluss
2. Drücken Sie die Taste HOME MENU.
Wählen Sie mit den Tasten
U
/
u
/
I
/
i
, die
Option [Spiel lm], [Foto] oder [Musik] und
drücken Sie ENTER ( ).
3. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
eine
Datei aus und drücken Sie zur Wiedergabe
auf PLAY bzw. auf ENTER (
).
Anzeige der freien Speicherkapazität des
USB-Gerätes auf dem Bildschirm.
4. Wählen Sie eine andere Betriebsart. Ziehen
Sie das USB-Gerät vorsichtig ab.
HINWEIS
Dieser Player unterstützt USB-Flash-Speicher/
externe USB-Festplatten mit dem Dateiformat
FAT16, FAT32 und NTFS (Musik, Foto und Video).
Für BD-LIVE sowie zum Kopieren von Audio-
CDs wird jedoch ausschließlich das Dateiformat
FAT16 oder FAT32 unterstützt. Bitte nutzen Sie
für BD-LIVE und zum Kopieren von Audio-CDs
den USB-Flash-Speicher/eine externe Festplatte
mit dem Dateiformat FAT16 oder FAT32.
Das USB-Gerät kann als lokaler Speicher
eingesetzt werden, um BD-LIVE-Discs über das
Internet wiederzugeben.
Dieses Gerät unterstützt bis zu vier Partitionen
auf einem USB-Gerät.
Ein USB-Gerät niemals während des Betriebs
trennen (z. B. während der Wiedergabe oder
eines Kopiervorgangs).
USB-Geräte, für die zum Anschluss an einen
Computer eine zusätzliche Softwareinstallation
erforderlich ist werden nicht unterstützt.
USB-Gerät: USB-Gerät mit Unterstützung für
USB 1.1 und USB 2.0.
Es können Film-, Musik- und Fotodateien
wiedergegeben werden. Weitere Hinweise zu
den Bedienungsfunktionen für die einzelnen
Dateitypen  nden Sie auf den entsprechenden
Seiten.
Zur Vermeidung von Datenverlust sollten
regelmäßig Sicherungskopien erstellt werden.
Bei Verwendung eines Verlängerungskabels,
eines USB-Hubs oder eines USB Multi-
Kartenlesegerätes wird das USB-Gerät u. U. nicht
erkannt.
Bestimmte USB-Geräte funktionieren nicht
zusammen mit diesem Gerät.
Digitalkameras und Mobiltelefone werden nicht
unterstützt.
Der USB-Anschluss dieses Gerätes kann nicht für
den Anschluss an einen PC genutzt werden.
HB985-DB.BDEUPPK_GER.indd 31HB985-DB.BDEUPPK_GER.indd 31 2010-05-14  2:06:512010-05-14  2:06:51
32 Montage
Montage
3
Einstellungen
Setup-Einstellungen
vornehmen
Im Menü [Setup] können die Einstellungen für
den Player vorgenommen werden.
1. Drücken Sie die Taste HOME MENU (
).
2. Wählen Sie mit den Tasten
I
/
i/U
/
u
den
Eintrag [Setup] und drücken Sie ENTER
( ). Daraufhin wird das Menü [Setup]
aufgerufen.
3. Wählen Sie mit den Tasten
U
/
u
den ersten
Eintrag aus und drücken Sie die Taste
i
, um
in das Unterverzeichnis zu gelangen.
4. Wählen Sie mit den Tasten
U
/
u
den zweiten
Eintrag aus und drücken Sie auf ENTER
(
), um in das nächste Unterverzeichnis zu
gelangen.
5. Wählen Sie mit den Tasten
U
/
u
die
gewünschte Einstellung und drücken Sie
zur Bestätigung der Auswahl die Taste
i
oder ENTER ( ).
HB985-DB.BDEUPPK_GER.indd 32HB985-DB.BDEUPPK_GER.indd 32 2010-05-14  2:06:512010-05-14  2:06:51
33Montage
3
Montage
Das Menü [ANZEIGE]
Bildformat
Wählen Sie die für das Bildformat des
Fernsehers die geeignete Einstellung.
[4:3 Letterbox]
Beim Anschluss an einen Standard
4:3-Fernseher. Zeigt Kino lme mit
schwarzen Balken oberhalb und unterhalb
des Bildes.
[4:3 Panscan]
Beim Anschluss an einen Standard
4:3-Fernseher. Das Bild wird verkleinert, um
den Bildschirm zu füllen. Beide Seiten des
Bildes werden abgeschnitten.
[16:9 Original]
Beim Anschluss an einen
16:9-Breitbildfernseher. Das 4:3-Bild wird
im Original-Bildformat 4:3 mit schwarzen
Streifen am linken und rechten Bildrand
angezeigt.
[16:9 Vollbild]
Beim Anschluss an einen
16:9-Breitbildfernseher.
HINWEIS
Die Optionen [4:3 Letterbox] und [4:3 PanScan]
können bei einer höheren Au ösung als 720p nicht
eingestellt werden.
Au ösung
Einstellen der Ausgabeau ösung für das
Component- und HDMI-Videosignal.
Einzelheiten zur Einstellung der Au ösung
nden Sie auf den Seiten 23 und 70.
[Auto]
Falls an der HDMI OUT-Buchse ein
Fernsehgerät angeschlossen ist, das
Anzeigeinformation (EDID) bereitstellt, wird
die Au ösung für den angeschlossenen
Fernseher automatisch optimal angepasst.
Falls der Anschluss ausschließlich über
die COMPONENT VIDEO OUT-Buchse
erfolgt, wird die Standardau ösung 1080i
eingestellt.
[1080p]
Ausgabe von 1080 Zeilen Progressive-Video.
[1080i]
Ausgabe von 1080 Zeilen Interlaced-Video.
[720p]
Ausgabe von 720 Zeilen Progressive-Video.
[576p (480p)]
Ausgabe von 576 (480) Zeilen Progressive-
Video.
[576i (480i)]
Ausgabe von 576 (480) Zeilen Interlaced-
Video.
HB985-DB.BDEUPPK_GER.indd 33HB985-DB.BDEUPPK_GER.indd 33 2010-05-14  2:06:522010-05-14  2:06:52
34 Montage
Montage
3
1080p-Anzeige
Wählen Sie bei einer Au ösung von 1080p die
Einstellung [24 Hz], um Filme auf HDMI-fähigen
Anzeigegeräten mit 1080p/24 Hz-Eingang
ruckelfrei darzustellen (1080p/24 Hz).
HINWEIS
In der Einstellung [24 Hz] können beim Wechsel
zwischen Video- und Filmmaterial Bildstörungen
auftreten. Wählen Sie in diesem Fall die
Einstellung [50 Hz].
Auch wenn die Option [1080p-Anzeige] auf
[24 Hz] eingestellt ist, wird die tatsächliche
Bildfrequenz der Videoausgabe je nach Format
der Video-Quelle auf 50 Hz festgelegt, falls Ihr
Fernsehgerät die Au ösung 1080p/24 Hz nicht
unterstützt.
HDMI-Farbeinst.
Auswahl der Ausgabeart über die HDMI
OUT-Buchse. Hinweise zu dieser Einstellung
nden Sie in der Bedienungsanleitung des
Anzeigegerätes.
[YCbCr]
Wählen Sie diese Einstellung beim
Anschluss an HDMI-Anzeigegerät.
[RGB]
Wählen Sie diese Einstellung beim
Anschluss an DVI-Anzeigegerät.
Das Menü [SPRACHE]
Anzeigemenü
Sprache für das [Setup]-Menü und für die
Bildschirmmenüs festlegen.
Disc-Menü/Disc-Audio/Disc-Untertitel
Wählen Sie die gewünschte Sprache für
Audiotracks (Disc-Audio), für Untertitel und für
die Disc-Menüs aus.
[Original]
Die auf der Disc aufgezeichnete
Originalsprache wird verwendet.
[Andere]
Drücken Sie zur Auswahl einer anderen
Sprache auf ENTER (
). Geben Sie über
die Nummerntasten die entsprechende
vierstellige Nummer ein, die Sie der Liste
der Sprachcodes entnehmen können
(siehe Seite 69), und drücken Sie ENTER ( ).
[Aus] (nur für Disc-Untertitel)
Untertitel ausblenden.
HINWEIS
Die Spracheinstellungen werden je nach Disc
möglicherweise nicht übernommen.
HB985-DB.BDEUPPK_GER.indd 34HB985-DB.BDEUPPK_GER.indd 34 2010-05-14  2:06:522010-05-14  2:06:52
35Montage
3
Montage
Das Menü [AUDIO]
Lautsprecher-Setup
Nutzen Sie für einen optimalen Ton die
Lautsprechereinstellungen, um die Lautstärke
der angeschlossenen Lautsprecher sowie die
Abstände von der Zuhörerposition festzulegen.
Führen Sie den Test durch, um die Lautstärke
der Lautsprecher auf den gleichen Wert
einzustellen.
[Lautsprecher]
Wählen Sie einen einzustellenden
Lautsprecher aus.
[Lautstärke]
Lautstärkepegel für jeden Lautsprecher
festlegen.
[Abstand]
Abstände der einzelnen Lautsprecher zur
Zuhörerposition festlegen.
[Test/Testton beenden]
Ausgabe eines Testtons über die Lautsprecher.
[OK]
Einstellung übernehmen.
[Abbrechen]
Änderungen verwerfen.
HD AV Sync
Beim Digitalfernsehen kann es zu
Verzögerungen zwischen Bild und Ton
kommen. In diesem Fall kann eine Verzögerung
für den Ton festgelegt werden, so dass der Ton
auf das Bild ‘wartet’: Diese Funktion wird als HD
AV Sync bezeichnet. Wählen Sie mit den Tasten
U u
einen Wert zwischen 0 und 300 mSek. für
die Verzögerung aus.
Die Verzögerung kann je nach eingestelltem
digitalen Fernsehsender variieren. Beim
Umschalten des Kanals muss der Wert für HD
AV Sync u. U. geändert werden.
DRC (Steuerung des
Dynamikbereichs)
Während der Wiedergabe von Dolby Digital-
oder Dolby Digital Plus-Inhalten möchten
Sie vielleicht den Dynamikbereich der
Audioausgabe verringern (den Unterschied
zwischen den lautesten und den leisesten
Tönen). Auf diese Weise können Sie z. B. einen
Film bei geringer Lautstärke anschauen, ohne
dass die Klangqualität abnimmt. Stellen Sie
die Option [DRC] auf [Ein], um die Funktion zu
aktivieren.
HINWEIS
Die DRC-Einstellungen können nur vorgenommen
werden, wenn keine Disc eingelegt ist oder die
Wiedergabe vollständig angehalten wurde.
HB985-DB.BDEUPPK_GER.indd 35HB985-DB.BDEUPPK_GER.indd 35 2010-05-14  2:06:522010-05-14  2:06:52
36 Montage
Montage
3
Das Menü [SPERRE]
Um eine Funktion mit der Einstellung [SPERRE]
aufzurufen, müssen Sie den zuvor erstellten
vierstelligen Sicherheitscode eingeben.
Falls Sie noch kein Kennwort vergeben haben,
werden Sie nun dazu aufgefordert. Geben Sie
zweimal ein vierstelliges Kennwort ein und
drücken Sie ENTER (
) um das neue Kennwort
zu erstellen.
Kennwort
Sie können ein Kennwort vergeben oder ändern.
[Keine]
Geben Sie zweimal ein vierstelliges
Kennwort ein und drücken Sie ENTER ( ),
um das neue Kennwort zu erstellen.
[Ändern]
Geben Sie das aktuelle Kennwort ein und
drücken Sie ENTER (
). Geben Sie zweimal
ein vierstelliges Kennwort ein und drücken
Sie ENTER ( ), um das neue Kennwort zu
erstellen.
HINWEIS
Um eine falsche Eingabe vor dem Drücken auf
ENTER (
) zu korrigieren, drücken Sie auf CLEAR.
Geben Sie nun das korrekte Kennwort ein.
Wenn Sie das Kennwort vergessen
haben,
Falls Sie das Kennwort vergessen haben, kann es
mit folgenden Schritten gelöscht werden:
1. Nehmen Sie eine evtl. eingelegte Disc aus
dem Player.
2.
Wählen Sie im [SPERRE]-Menü die Option [Setup].
3. Geben Sie im Menü [Sperre] über die
Nummerntasten das Kennwort “210499” ein.
Das Kennwort wird gelöscht.
DVD-Einstufung
Verhindert die Wiedergabe von nicht
jugendfreien DVDs. (Es sind jedoch nicht alle
DVDs eingestuft.)
[Einstufung 1-8]
Stufe 1 bedeutet niedrigste
Wiedergabeeinschränkungen.
Stufe 8 bedeutet höchste
Wiedergabeeinschränkungen.
[Aufheben]
In dieser Einstellung wird die
Kindersicherung deaktiviert und die Disc
wird ohne Einschränkungen wiedergegeben.
BD-Einstufung
Festlegen einer Altersfreigabe für BD-ROM-
Discs. Geben Sie über die Nummerntasten eine
Altersfreigabe zur Wiedergabe von BD-ROM-
Discs ein.
[255]
Alle BD-ROM-Discs wiedergeben.
[0-254]
BD-ROM-Discs mit der entsprechenden
Einstufung wiedergeben.
HINWEIS
Eine [BD-Einstufung] kann nur für BD-Discs mit
Avance Rating Controller vorgenommen werden.
Ländercode
Geben Sie gemäß der Liste auf Seite 68 den
Code für das Land ein, dessen Standards
bei der Einstufung der DVD-Video-Disc
angewendet wurden.
HB985-DB.BDEUPPK_GER.indd 36HB985-DB.BDEUPPK_GER.indd 36 2010-05-14  2:06:522010-05-14  2:06:52
37Montage
3
Montage
Das Menü [NETZWERK]
Verbindungseinst.
Nachdem Sie Ihr Heimnetzwerk zur Verbindung
mit den Player vorbereitet haben, muss
für der Player für die Netzwerkverbindung
eingerichtet werden. (Siehe Verbindung mit
dem Heimnetzwerk auf den Seite 28.)
Verbindungsstatus
Um den Netzwerkstatus dieses Players
zu überprüfen, wählen Sie die Option
[Verbindungsstatus] und drücken Sie auf
ENTER ( ), um die Verbindung zum Netzwerk
und zum Internet zu testen.
BD-LIVE-Verbindung
Der Internetzugri für die BD-LIVE-Funktionen
kann eingeschränkt werden.
[Zulässig]
Der Internetzugri wird für sämtliche BD-
LIVE-Inhalte freigegeben.
[Teilweise zulässig]
Der Internetzugri wird nur für BD-
LIVE-Inhalte mit entsprechendem
Benutzerzerti kat freigegeben. Für
sämtliche BD-LIVE-Inhalte ohne Zerti kat
werden der Internetzugri sowie AACS-
Onlinefunktionen gesperrt.
[Nicht zulässig]
Der Internetzugri wird für sämtliche BD-
LIVE-Inhalte gesperrt.
Das Menü [WEITERE]
DivX VOD
ÜBER DIVX-VIDEO: DivX® ist ein von DivX, Inc.
entwickeltes digitales Videoformat. Dies ist
ein o zielles DivX Certi ed- oder DivX Ultra
Certi ed-Gerät zur Wiedergabe von DivX-
Video. Weitere Information und Software-Tools
zur Konvertierung von Dateien in DivX-Videos
nden Sie unter www.divx.com.
ÜBER DIVX VIDEO-ON-DEMAND: Dieses DivX®
Certi ed-Gerät muss zur Wiedergabe von DivX
Video-on-Demand (VOD) registriert werden.
Eine Registrierungskennung kann im Abschnitt
DivX VOD im Einstellungsmenü des Gerätes
erstellt werden. Geben Sie diese Kennung
unter vod.divx.com an, um die Registrierung
abzuschließen und weitere Informationen zu
DivX VOD zu erhalten.
[Registrieren]
Anzeige des Registrierungscodes des Players.
[Registrierung deaktivieren]
Player deaktivieren und Deaktivierungscode
anzeigen.
HINWEIS
Sämtliche über DivX VOD heruntergeladenen Filme
mit dem Registrierungscode dieses Players können
nur mit diesem Gerät wiedergegeben werden.
HB985-DB.BDEUPPK_GER.indd 37HB985-DB.BDEUPPK_GER.indd 37 2010-05-14  2:06:522010-05-14  2:06:52
38 Montage
Montage
3
Autom. Ausschalten
Der Bildschirmschoner wird eingeblendet,
wenn der Player ca. fünf Minuten im Stopp-
Modus betrieben wird. In der Einstellung [Ein]
wird das Gerät automatisch abgeschaltet,
nachdem der Bildschirmschoner 25 Minuten
lang angezeigt wurde.
Stellen Sie diese Einstellung auf [Aus] ein, um
den Bildschirmschoner anzuzeigen, bis das
Gerät wieder bedient wird.
Initialisieren
Werkseinstellungen
Der Player kann auf die ursprünglichen
Werkseinstellungen zurückgesetzt werden.
BD-Speicher löschen
BD-Inhalte auf dem angeschlossenen USB-
Gerät löschen.
HINWEIS
Nach dem Zurücksetzen des Players auf
die Werkseinstellungen über die Option
[Werkseinstellungen] müssen sämtliche
Aktivierungen für Online-Dienste sowie die
Netzwerkeinstellungen erneut vorgenommen
werden.
Software-Information
Aktuelle Software-Version anzeigen.
HB985-DB.BDEUPPK_GER.indd 38HB985-DB.BDEUPPK_GER.indd 38 2010-05-14  2:06:522010-05-14  2:06:52
39Montage
3
Montage
Klange ekte
Drücken Sie mehrmals die Taste SOUND am
Gerät, bis die gewünschte Klangart in der
Anzeige oder auf dem Fernsehbildschirm
erscheint. Die angezeigten Einträge für den
Equalizer können je nach Klangquellen und
E ekten variieren.
[Pioneer 1]: Für einen satten Klang durch den
Anschluss kleiner Lautsprecher (S-BD303).
[Pioneer 2]: Für einen satten Klang durch den
Anschluss großer Lautsprecher (S-BD707T).
[Bypass]: Softwaretitel mit Mehrkanal-
Surround-Audiosignalen werden so
wiedergegeben, wie sie aufgenommen
wurden.
[Bass Blast]: Bässe der linken und rechten
Lautsprecher und des Subwoofers verstärken.
[PL ll Movie]: Pro Logic ll Spiel lm-Modus zur
Dekodierung des Eingangssignals zur Ausgabe
von fünf Ausgangskanälen voller Bandbreite
über ein Zweikanal-System. Diese Einstellung
eignet sich ideal zum Anschauen von
synchronisierten Videos oder alten Spiel lmen.
Diese Funktion ist nur im 2-Kanal-Modus
verfügbar.
[PL ll Music]: Pro Logic ll Musik-Modus zur
Dekodierung des Eingangssignals zur Ausgabe
von fünf Ausgangskanälen voller Bandbreite
über ein Zweikanal-System. Diese Einstellung
eignet sich ideal zum Anhören normaler
Stereo-Quellen wie CDs. Diese Funktion ist nur
im 2-Kanal-Modus verfügbar.
[Clear Voice]: In diesem Modus wird
Sprache klarer und mit verbesserter Qualität
wiedergegeben.
[Game]: Virtueller Klang für Videospiele.
[Night]: Diese Funktion ist nützlich, um
Spiel lme bei Nacht mit geringer Lautstärke
anzuschauen.
[Mus. ReTouch]: Klangverbesserung beim
Anhören von MP3-Dateien oder anderen
komprimierten Musikdateien. Diese Funktion
ist nur im 2-Kanal-Modus verfügbar.
[Loudness]: Verbesserung der Bässe und
Höhen.
HB985-DB.BDEUPPK_GER.indd 39HB985-DB.BDEUPPK_GER.indd 39 2010-05-14  2:06:522010-05-14  2:06:52
40 Betrieb
Betrieb
4
Normale Wiedergabe
Discs wiedergeben
1. Drücken Sie die Taste
Z
OPEN/CLOSE und
legen Sie eine Disc in das Disc-Fach.
2. Drücken Sie auf
Z
OPEN/CLOSE, um das
Disc-Fach zu schließen.
Die Wiedergabe wird bei den meisten
Audio-CDs, BD-ROM- und DVD-ROM-Discs
automatisch gestartet.
3. Drücken Sie die Taste
HOME MENU.
4. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
, die
Option [Spiel lm], [Foto] oder [Musik] und
drücken Sie ENTER ( ).
5. Wählen Sie mit den Tasten
I
/
i
den Eintrag
Disc und drücken Sie ENTER (
).
Beim Anschluss von bis zu zwei Geräten
erscheint diese Anzeige.
6. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
eine
Datei aus und drücken Sie zur Wiedergabe
auf
B
PLAY bzw. auf ENTER (
).
HINWEIS
Die in dieser Anleitung beschriebenen
Wiedergabefunktionen sind nicht für alle
Dateien und Medien verfügbar. Bestimmte
Funktionen sind aus verschiedenen Gründen
nicht immer möglich.
Je nach BD-ROM-Titeln muss zur störungsfreien
Wiedergabe ein USB-Gerät angeschlossen
werden.
4
Betrieb
HB985-DB.BDEUPPK_GER.indd 40HB985-DB.BDEUPPK_GER.indd 40 2010-05-14  2:06:522010-05-14  2:06:52
41Betrieb
4
Betrieb
Wiedergabe anhalten
Drücken Sie während der Wiedergabe auf
x
STOP.
Wiedergabe unterbrechen
Drücken Sie während der Wiedergabe auf
X
PAUSE/STEP.
Drücken Sie zum Fortsetzen der Wiedergabe
auf
B
PLAY.
Einzelbildwiedergabe
Drücken Sie während der Wiedergabe auf
X
.
Drücken Sie zur Einzelbildwiedergabe
mehrmals auf
X
.
Suchlauf vor oder zurück.
Drücken Sie für den schnellen Vorlauf bzw. den
schnellen Rücklauf während der Wiedergabe
die Taste
m
bzw.
M
.
Um die Wiedergabegeschwindigkeit zu
ändern, drücken Sie mehrmals die Taste
m
bzw.
M
.
Wiedergabegeschwindigkeit
verringern
Drücken Sie zur Wiedergabe in Zeitlupe
mit verschiedenen Geschwindigkeiten bei
unterbrochener Wiedergabe die Taste
M
SCAN.
Zum/Zur nächsten/vorherigen
Kapitel/Titel/Datei springen
Drücken Sie während der Wiedergabe die Taste
.
bzw.
>
, um zum nächsten Kapitel/
Track/Dateien bzw. zum Anfang das aktuelle
Kapitel/Track/Dateien zu springen.
Drücken Sie zweimal kurz die Taste
.
, um
zum vorherigen Kapitel/Track/Dateien zu
springen.
Bedienungen im Disc-Menü
BD
DVD
AVCHD
Disc-Menü aufrufen
Der Menübildschirm wird u. U. erst nach dem
Laden einer Disc mit Menü angezeigt.
Drücken Sie zur Anzeige des Disc-Menüs
während der Wiedergabe auf MENU.
Wählen Sie mit den Tasten
U
/
u
/
I
/
i
den
gewünschten Menüeintrag aus.
Popup-Menü einblenden
Bestimmte BD-ROM-Discs besitzen ein
Kontextmenü, das während der Wiedergabe
eingeblendet wird.
Drücken Sie während der Wiedergabe die
Taste POPUP/ TOP MENU und rufen Sie mit
den Tasten
U
/
u
/
I
/
i
die gewünschten
Menüpunkte auf.
HB985-DB.BDEUPPK_GER.indd 41HB985-DB.BDEUPPK_GER.indd 41 2010-05-14  2:06:532010-05-14  2:06:53
42 Betrieb
Betrieb
4
Wiedergabe fortsetzen
BD
DVD
AVCHD
MOVIE
ACD
MUSIC
Bei bestimmten Discs merkt sich das Gerät
den Punkt, an dem die Taste
x
STOP gedrückt
wurde. Sobald das Symbol
Xx
(Pause Stop)”
kurz auf dem Bildschirm erscheint, drücken
Sie auf
B
PLAY, um die Wiedergabe (ab der
aktuellen Szene) fortzusetzen.
Bei zweimaligem Drücken auf
x
STOP bzw.
beim Auswerfen der Disc erscheint das Symbol
x
Stop auf dem Bildschirm. Das Gerät löscht
daraufhin sämtliche Anhaltepunkte.
HINWEIS
Der Fortsetzungspunkt wird beim Betätigen
einer Taste u. U. gelöscht (z. B.
1
(POWER),
Z
(OPEN/CLOSE), etc).
Bei BD-Video-Discs einschließlich BD-J ist die
Funktion Wiedergabe fortsetzen nicht möglich.
Beim Drücken auf
x
(STOP) während der
Wiedergabe eines interaktiven Titels einer BD-
ROM wird die Wiedergabe angehalten.
Erweiterte
Wiedergabe
Wiederholte Wiedergabe
BD
DVD
AVCHD
ACD
MUSIC
Drücken Sie während der Wiedergabe
mehrmals die Taste REPEAT (
), um den
gewünschten Wiederholungsmodus
einzustellen.
BDs/DVDs
A-
– Den ausgewählten Abschnitt
wiederholt wiedergeben.
Kapitels
– Das aktuelle Kapitel mehrmals
wiedergeben.
Title
Titel
– Den aktuellen Titel mehrmals
wiedergeben.
Drücken Sie zur normalen Wiedergabe
mehrmals die Taste REPEAT (
) und
wählen Sie die Option [AUS].
Audio-CDs/Musikdateien
– Den aktuellen Track oder die
Datei mehrmals wiedergeben.
– Alle Tracks oder Dateien mehrmals
wiedergeben.
Tracks bzw. Dateien in zufälliger
Reihenfolge wiedergeben.
– Alle Tracks oder Dateien
mehrmals in zufälliger Reihenfolge
wiedergeben.
– Den ausgewählten Abschnitt
wiederholt wiedergeben. (nur Audio-CD)
Drücken Sie zur normalen Wiedergabe die
Taste CLEAR.
HINWEIS
Beim Drücken der Taste
>
während der
wiederholten Wiedergabe eines Kapitels/Titels
wird die Wiedergabewiederholung beendet.
Diese Funktion ist bei einigen Discs oder Titeln
nicht v
erfügbar.
HB985-DB.BDEUPPK_GER.indd 42HB985-DB.BDEUPPK_GER.indd 42 2010-05-14  2:06:532010-05-14  2:06:53
43Betrieb
4
Betrieb
Abschnittswiederholung
BD
DVD
AVCHD
ACD
Es ist möglich, einen markierten Abschnitt
wiederholt wiederzugeben.
1. Drücken Sie während der Wiedergabe die
Taste REPEAT (
), um den Startpunkt [A-]
des zu wiederholenden Abschnitts
festzulegen. Drücken Sie abschließend auf
ENTER (
).
2. Drücken Sie am Ende des Abschnitts auf
ENTER (
). Der gewählte Abschnitt wird
daraufhin fortlaufend wiederholt.
3. Drücken Sie zur normalen Wiedergabe
mehrmals die Taste REPEAT (
) und
wählen Sie die Option [Aus].
HINWEIS
Ein Abschnitt muss mindestens drei Sekunden lang
sein.
Markensuche
BD
DVD
AVCHD
MOVIE
Die Wiedergabe kann von bis zu neun
gespeicherten Punkten erfolgen.
Eine Marke hinzufügen
1. Drücken Sie während der Wiedergabe an
der gewünschten Stelle die Taste MARKER.
Daraufhin wird kurz das Markierungssymbol
auf dem Bildschirm eingeblendet.
2. Wiederholen Sie Schritt 1, um bis zu neun
Markierungen festzulegen.
Aufrufen einer markierten Szene
1. Drücken Sie die Taste SEARCH, um das
Suchmenü auf dem Bildschirm aufzurufen.
2. Wählen Sie über die Nummerntasten die
gewünschte Markierungsnummer aus. Die
Wiedergabe beginnt ab der markierten
Szene.
Eine Marke löschen
1. Drücken Sie die Taste SEARCH, um das
Suchmenü auf dem Bildschirm aufzurufen.
2. Drücken Sie die Taste
u
, um die gewünschte
Markierungsnummer zu markieren.
Wählen Sie mit den Tasten
I
/
i
die
gewünschte markierte Szene zum Löschen
aus.
3. Drücken Sie die Taste CLEAR, um die
markierte Szene im Suchmenü zu löschen.
HINWEIS
Diese Funktion ist bei bestimmten Discs, Titeln
und je nach Verfügbarkeit des Servers nicht
möglich.
Beim Anhalten des Titels (
x
), beim Ändern des
Titels oder beim Auswerfen der Disc werden alle
Markierungspunkte gelöscht.
Falls die Gesamtlänge des Titels weniger als
10 Sekunden beträgt, ist diese Funktion nicht
möglich.
HB985-DB.BDEUPPK_GER.indd 43HB985-DB.BDEUPPK_GER.indd 43 2010-05-14  2:06:532010-05-14  2:06:53
44 Betrieb
Betrieb
4
Funktionen im Suchmenü
BD
DVD
AVCHD
MOVIE
Über das Suchmenü kann eine gewünschte
Stelle zum Beginn der Wiedergabe aufgerufen
werden.
Einen Wiedergabepunkt suchen
1. Drücken Sie während der Wiedergabe
die Taste SEARCH, um das Suchmenü
aufzurufen.
2. Drücken Sie die Taste
I
/
i
, um während der
Wiedergabe 15 Sekunden vor oder zurück
zu springen. Um eine bestimmte Stelle
zu überspringen, halten Sie die Taste
I
/
i
gedrückt.
Wiedergabe ab der markierten Szene
starten
1. Drücken Sie die Taste SEARCH, um das
Suchmenü auf dem Bildschirm aufzurufen.
2. Drücken Sie die Taste
u
, um die gewünschte
Markierungsnummer zu markieren.
Wählen Sie mit den Tasten
I
/
i
die
gewünschte markierte Szene zum Löschen
aus.
3. Drücken Sie zur Wiedergabe ab der
markierten Szene auf ENTER (
).
HINWEIS
Diese Funktion ist bei bestimmten Discs, Titeln
und je nach Verfügbarkeit des Servers nicht
möglich.
Diese Funktion ist je nach Dateityp und
Eigenschaften des DLNA-Servers für bestimmte
Inhalte unter[Home Link] nicht möglich.
Merken der letzten Szene
BD
DVD
Dieses Gerät merkt sich die zuletzt gespielte
Szene der letzten Disc. Die letzte Szene wird im
Speicher aufbewahrt, auch wenn die Disc aus
dem Player herausgenommen oder das Gerät
ausgeschaltet wird. Beim erneuten Einlegen
dieser Disc wird die gespeicherte Szene
automatisch wiedergegeben.
HINWEIS
Die Funktion Letzte Szene merken wird beim
Einlegen einer neuen Disc zurückgesetzt.
Diese Funktion ist bei bestimmten Discs nicht
möglich.
Die Einstellungen einer Disc werden nicht
gespeichert, wenn das Gerät vor der Wiedergabe
der Disc ausgeschaltet wird.
HB985-DB.BDEUPPK_GER.indd 44HB985-DB.BDEUPPK_GER.indd 44 2010-05-14  2:06:532010-05-14  2:06:53
45Betrieb
4
Betrieb
Bildschirmmenü
Es können verschiedene Informationen und
Einstellungen zum Inhalt angezeigt und
bearbeitet werden.
Anzeige der Informationen zum
Inhalt auf dem Bildschirm
BD
DVD
AVCHD
MOVIE
1. Drücken Sie während der Wiedergabe
die Taste DISPLAY (
), um verschiedene
Wiedergabeinformationen anzuzeigen.
a
h
g
f
e
d
c
b
a
Titel – aktuelle Titelnummer/
Gesamtanzahl der Titel
b
Kapitel – Aktuelle Kapitelnummer/
Gesamtan-zahl der Kapitel
c
Zeit – verstrichene Spielzeit/Gesamte
Spielzeit
d
Audio – Ausgewählte Audiosprache oder
gewählter Tonkanal
e
Untertitel – Ausgewählte Untertitel
f
Winkel – Ausgewählter Kamerawinkel/
Gesamt-anzahl der Kamerawinkel
g
Bildformat – gewähltes TV-Bildformat
h
Bildmodus – gewählter Anzeigemodus
2. W
ählen Sie mit den Tasten
U
/
u
eine
Einstellung aus.
3. Stellen Sie mit den Tasten
I
/
i
den
gewünschten Einstellungswert ein.
4. Drücken Sie auf RETURN (
O
), um das
Bildschirmmenü zu verlassen.
HINWEIS
Wird einige Sekunden lang keine Taste gedrückt,
wird die Bildschirmanzeige ausgeblendet.
Bei bestimmten Discs können Titelnummern
nicht ausgewählt werden.
Die verfügbaren Einträge können je nach Disc
oder Titel variieren.
Während der Wiedergabe eines interaktiven
BD-Titels werden auf dem Bildschirm
möglicherweise verschiedene Einstellungen
angezeigt, die jedoch nicht geändert werden
können.
HB985-DB.BDEUPPK_GER.indd 45HB985-DB.BDEUPPK_GER.indd 45 2010-05-14  2:06:532010-05-14  2:06:53
46
Betrieb
Betrieb
4
Wiedergabe ab einer gewählten
Zeitposition
BD
DVD
AVCHD
MOVIE
1. Drücken Sie während der Wiedergabe auf
DISPLAY (
). Im Zeit-Suchlauf-Feld wird die
verstrichene Spielzeit angezeigt.
2. Wechseln Sie in das [Zeit]-Feld und geben
Sie die gewünschte Startzeit von links nach
rechts in Stunden, Minuten und Sekunden
ein.
Um beispielsweise eine Szene an der
Wiedergabezeit 2 Stunden, 10 Minuten und
20 Sekunden zu suchen, geben Sie den
Wert “21020” ein.
Drücken Sie die Taste
I
/
i
, um während der
Wiedergabe 60 Sekunden vor oder zurück
zu springen.
3. Drücken Sie zur Wiedergabe ab dem
gewählten Zeitpunkt auf ENTER (
).
HINWEIS
Diese Funktion ist bei einigen Discs oder Titeln
nicht verfügbar.
Diese Funktion ist je nach Dateityp und
Eigenschaften des DLNA-Servers für bestimmte
Inhalte unter [Home Link] nicht möglich.
Auswahl der Untertitelsprache
BD
DVD
AVCHD
MOVIE
1. Drücken Sie während der Wiedergabe die
Taste DISPLAY (
), um das Bildschirmmenü
einzublenden.
2. Wählen Sie mit den Tasten
U
/
u
die Option
[Audio].
3. Wählen Sie mit den Tasten
I
/
i
die
gewünschte Sprache, die Audiospur oder
den Tonkanal aus.
HINWEIS
Bei bestimmten Discs kann die Sprache nur über
das Disc-Menü eingestellt werden. Drücken
Sie in diesem Fall die Taste POPUP/TOP MENU
bzw. MENU und wählen Sie im Disc-Menü die
gewünschte Sprache.
Unmittelbar nach dem Umstellen des Tons kann
es zu einer vorübergehenden Verzögerung
zwischen Bild und Ton kommen.
Auswahl der Untertitelsprache
BD
DVD
AVCHD
MOVIE
1. Drücken Sie während der Wiedergabe die
Taste DISPLAY (
), um das Bildschirmmenü
einzublenden.
2. Wählen Sie mit den Tasten
U
/
u
die Option
[Untertitel].
3. Wählen Sie mit den Tasten
I
/
i
die
gewünschte Untertitelsprache.
4. Drücken Sie auf RETURN (
O
), um das
Bildschirmmenü zu verlassen.
HINWEIS
Bei bestimmten Discs können die Untertitel nur
über das Disc-Menü eingestellt werden. Drücken
Sie in diesem Fall die Taste POPUP/ TOP MENU
bzw. MENU und wählen Sie im Disc-Menü die
gewünschten Untertitel.
HB985-DB.BDEUPPK_GER.indd 46HB985-DB.BDEUPPK_GER.indd 46 2010-05-14  2:06:532010-05-14  2:06:53
47
Betrieb
4
Betrieb
Anzeige verschiedener
Kamerawinkel
BD
DVD
Falls Szenen auf der Disc in verschiedenen
Kamerawinkeln aufgezeichnet wurden, kann
der Kamerawinkel während der Wiedergabe
gewechselt werden.
1. Drücken Sie während der Wiedergabe die
Taste DISPLAY ( ), um das Bildschirmmenü
einzublenden.
2. Wählen Sie mit den Tasten
U
/
u
die Option
[Winkel].
3. Legen Sie mit den Tasten
I
/
i
den
gewünschten Blickwinkel fest.
4. Drücken Sie auf RETURN (
O
), um das
Bildschirmmenü zu verlassen.
Ändern des TV-Bildformats
BD
DVD
AVCHD
MOVIE
Das TV-Bildformat kann während der
Wiedergabe geändert werden.
1. Drücken Sie während der Wiedergabe die
Taste DISPLAY (
), um das Bildschirmmenü
einzublenden.
2. Wählen Sie mit den Tasten
U
/
u
die Option
[Bildformat].
3. Legen Sie mit den Tasten
I
/
i
das
gewünschte Bildformat fest.
4. Drücken Sie auf RETURN (
O
), um das
Bildschirmmenü zu verlassen.
HINWEIS
Beim Ändern der Einstellung [Bildformat] im
Bildschirmmenü wird die Einstellung [Bildformat]
im Menü [Setup] ebenfalls geändert.
Anzeigemodus einstellen
BD
DVD
AVCHD
MOVIE
Der [Bildmodus] kann während der
Wiedergabe geändert werden.
1. Drücken Sie während der Wiedergabe die
Taste DISPLAY (
), um das Bildschirmmenü
einzublenden.
2. Wählen Sie mit den Tasten
U
/
u
die Option
[Bildmodus].
3. Legen Sie mit den Tasten
I
/
i
das
gewünschte Bildformat fest.
4. Drücken Sie auf RETURN (
O
), um das
Bildschirmmenü zu verlassen.
Einstellen der Option [Benutzereinst.]
1. Drücken Sie während der Wiedergabe die
Taste DISPLAY (
), um das Bildschirmmenü
einzublenden.
2. Wählen Sie mit den Tasten
U
/
u
die Option
[Bildmodus].
3. Wählen Sie mit den Tasten
I
/
i
die Option
[Benutzereinst.] und drücken Sie ENTER (
).
4. Nehmen Sie mit den Tasten
U
/
u
/
I
/
i
die
Einstellungen für den [Bildmodus] vor.
Wählen Sie die Option [Standard]
und drücken Sie ENTER ( ), um die
Bildeinstellungen zurückzusetzen.
5. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
den Eintrag [Schl.] und drücken Sie zum
Beenden der Einstellungen auf ENTER (
).
HB985-DB.BDEUPPK_GER.indd 47HB985-DB.BDEUPPK_GER.indd 47 2010-05-14  2:06:532010-05-14  2:06:53
48
Betrieb
Betrieb
4
BD-LIVE-Discs
anschauen
Mit diesem Gerät werden Funktionen wie
Bild-im-Bild, zweiter Tonkanal oder virtuelle
Pakete für BD-Videoinhalte ermöglicht, die
BONUSVIEW (BD-ROM Version 2 Pro l 1 Version
1.1/Final Standard Pro le) unterstützen.
Für Discs, die die Bild-im-Bild-Funktion
unterstützen, kann ein zweites Videobild
angezeigt und eine zweite Tonspur
wiedergegeben werden. Hinweise zu dieser
Wiedergabeart  nden Sie in der Anleitung zur
jeweiligen Disc.
Neben der BONUSVIEW-Funktion unterstützen
BD-Videoinhalte zudem BD-LIVE-Inhalte (BD-
ROM Version 2 Pro l 2), mit deren Hilfe über
eine Netzwerkfunktion weitere Funktionen
genutzt werden können, wie z. B. das
Herunterladen neuer Filmvorschauen, indem
eine Internetverbindung hergestellt wird.
1. Überprüfen Sie die Netzwerkverbindung
und -einstellungen (Seiten 28-30).
2. Schließen Sie das USB-Speichergerät an den
USB-Anschluss auf dem Bedienungsfeld an.
Zum Herunterladen von Bonus-Material ist
ein USB-Speichergerät erforderlich.
USB-Anschluss
3 . Drücken Sie die Taste HOME MENU,
und nehmen Sie die Einstellungen für die
Option [BD-LIVE-Verbindung] im Menü
[Setup] vor (Seite 37).
Je nach eingelegter Disc ist die BD-LIVE-
Funktion u. U. nicht möglich, falls die
Option [BD-LIVE-Verbindung] auf [Teilweise
zulässig] eingestellt ist.
4 . Legen Sie eine BD-ROM-Disc mit BD-LIVE
ein.
Die Bedienung kann je nach Disc
variieren. Hinweise  nden Sie in der
Bedienungsanleitung der Disc.
HINWEIS
Das angeschlossene USB-Gerät darf nicht
während der Datenübertragung oder bei
eingelegter Blue-Ray-Disc getrennt werden.
Ansonsten könnte das angeschlossene USB-
Gerät beschädigt werden und die BD-LIVE-
Funktionen werden bei einem beschädigten
USB-Gerät u. U. nicht korrekt ausgeführt. Falls das
angeschlossene USB-Gerät aus diesem Grund
beschädigt zu sein scheint, kann das USB-Gerät
über einen PC neu formatiert und mit diesem
Player weiter genutzt werden.
• Der Zugri auf bestimmte BD-LIVE-Inhalte ist in
einigen Ländern u. U. eingeschränkt, je nach den
Richtlinien des Anbieters dieser Inhalte.
Es dauert möglicherweise einige Minuten, bis
die BD-LIVE-Inhalte geladen und angezeigt
werden.
HB985-DB.BDEUPPK_GER.indd 48HB985-DB.BDEUPPK_GER.indd 48 2010-05-14  2:06:542010-05-14  2:06:54
49
Betrieb
4
Betrieb
Wiedergabe von
Filmdateien und VR-
Discs
Mit diesem Player können DVD-RW-Discs
im Video-Aufnahmeformat (VR) sowie
Filmdateien auf einer Disc/einem USB-Gerät
wiedergegeben werden.
1. Drücken Sie die Taste
HOME MENU.
2. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
den
Eintrag [Spiel lm] und drücken Sie ENTER
( ).
3. Wählen Sie mit den Tasten
I
/
i
das Gerät
aus und drücken Sie ENTER ( ).
Beim Anschluss von bis zu zwei Geräten
erscheint diese Anzeige.
4. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
eine
Datei aus und drücken Sie zur Wiedergabe
auf
B
PLAY bzw. auf ENTER (
).
HINWEIS
Die Dateianforderungen  nden Sie auf Seite 11.
Es sind verschiedene Wiedergabefunktionen
möglich. Siehe Seiten 40-47.
Nicht  nalisierte DVD-VR-Discs werden auf
diesem Player u. U. nicht wiedergegeben.
Bestimmte DVD-VR-Discs enthalten CPRM-Daten
des DVD-REKORDERS. Solche Discs können auf
diesem Gerät nicht abgespielt werden.
Was bedeutet CPRM?
CPRM ist ein Kopierschutzsystem (mit
Verschlüsselung), bei dem nur einmalig
kopierbare’ Sendungen aufgenommen werden
können. CPRM steht für Content Protection for
Recordable Media.
HB985-DB.BDEUPPK_GER.indd 49HB985-DB.BDEUPPK_GER.indd 49 2010-05-14  2:06:542010-05-14  2:06:54
50
Betrieb
Betrieb
4
Auswahl der Untertiteldatei
MOVIE
Wenn Filmdatei und Untertiteldatei
den gleichen Namen besitzen, wird die
Untertiteldatei bei der Wiedergabe der
Filmdatei automatisch angezeigt.
Falls Filmdatei und Untertiteldatei
unterschiedliche Dateinamen besitzen, muss
die Untertiteldatei vor der Wiedergabe des
Films im Menü [Spiel lm] ausgewählt werden.
1. Wechseln Sie mit den Tasten
U
/
u
/
I
/
i
im
Menü [Film] eine Untertiteldatei zur Anzeige
aus.
2. Drücken Sie auf ENTER (
).
Drücken Sie zur Auswahl einer
Untertiteldatei nochmals auf ENTER ( ).
Die gewählte Untertiteldatei wird während
der Wiedergabe der Filmdatei angezeigt.
HINWEIS
Drücken Sie während der Wiedergabe auf
x
STOP, um die Auswahl der Untertiteldatei
aufzuheben.
Diese Funktion ist für [Home Link] nicht
verfügbar.
Zeichensatz für Untertitel
ändern
MOVIE
Falls die Untertitel nicht korrekt angezeigt
werden, kann der Zeichensatz der Untertitel
geändert werden.
1. Drücken Sie während der Wiedergabe die
Taste DISPLAY (
), um das Bildschirmmenü
einzublenden.
2. Wählen Sie mit den Tasten
U
/
u
die Option
[Codeliste].
3. Legen Sie mit den Tasten
I
/
i
den
gewünschten Zeichensatz fest.
4. Drücken Sie auf RETURN (
O
), um das
Bildschirmmenü zu verlassen.
HB985-DB.BDEUPPK_GER.indd 50HB985-DB.BDEUPPK_GER.indd 50 2010-05-14  2:06:542010-05-14  2:06:54
51
Betrieb
4
Betrieb
Bilddateien anzeigen
Mit diesem Player können Fotodateien
angezeigt werden.
1. Drücken Sie die Taste
HOME MENU
2. Wählen Sie mit den Tasten
I
/
i
den Eintrag
[Foto] und drücken Sie ENTER ( ).
3. Wählen Sie mit den Tasten
I
/
i
das Gerät
aus und drücken Sie ENTER ( ).
Beim Anschluss von bis zu zwei Geräten
erscheint diese Anzeige.
4. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
eine
Datei aus und drücken Sie zur Fotoanzeige
auf ENTER (
).
Diashow anzeigen
Drücken Sie zum Starten der Diashow auf
B
PLAY.
Diashow beenden
Drücken Sie während der Diashow auf
x
STOP.
Diashow unterbrechen
Drücken Sie während der Diashow auf
X
PAUSE/STEP.
Drücken Sie zum Fortsetzen der Diashow auf
B
PLAY.
Zum vorherigen/nächsten Foto
springen
Drücken Sie während der Vollbildanzeige eines
Fotos auf
I
bzw.
i
, um zum vorherigen bzw.
nächsten Foto zu gelangen.
HINWEIS
Die Dateianforderungen  nden Sie auf Seite 11.
Es sind verschiedene Wiedergabefunktionen
möglich. Siehe Seiten 40-47.
HB985-DB.BDEUPPK_GER.indd 51HB985-DB.BDEUPPK_GER.indd 51 2010-05-14  2:06:542010-05-14  2:06:54
52
Betrieb
Betrieb
4
Funktionen während der
Fotoanzeige
Während der Fotoanzeige im Vollbild stehen
Ihnen verschiedene Funktionen zur Verfügung.
1. Drücken Sie während der Vollbildanzeige
eines Fotos auf DISPLAY (
), um das
Einstellungsmenü aufzurufen.
2. Wählen Sie mit den Tasten
U
/
u
eine
Einstellung aus.
a
g
f
e
d
c
b
h
a
Aktuelles Foto/Gesamtanzahl der Fotos
Wechseln Sie mit den Tasten
I
/
i
zum
vorherigen/nächsten Foto.
b
Diashow – Drücken Sie zum Starten oder
Anhalten der Diashow die Taste ENTER
(
).
c
MusikauswahlWählen Sie eine
Hintergrundmusik für die Diashow aus.
d
Musik –Drücken Sie zum Starten oder
Beenden der Hintergrundmusik auf ENTER
(
).
e
Drehen – Drücken Sie zum Drehen eines
Fotos im Uhrzeigersinn auf ENTER (
).
f
Zoom – Drücken Sie zum Aufrufen des
Menüs [Zoom] auf ENTER( ).
g
E ektWählen Sie mit den Tasten
I
/
i
einen Überblendungse ekt zwischen den
einzelnen Fotos während einer Diashow.
h
GeschwindigkeitWählen Sie mit den
Tasten
I
/
i
die Verzögerung zwischen den
einzelnen Fotos während einer Diashow.
3. Drücken Sie auf RETURN (
O
) um das
Einstellungsmenü zu verlassen.
Während der Diaschau Musik
hören
Während der Fotoanzeige können Musiktitel
wiedergegeben werden.
1. Drücken Sie die Taste
HOME MENU
2. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
,
die Option [Foto] oder [Home Link] und
drücken Sie ENTER ( ).
3. Wählen Sie mit den Tasten
I
/
i
den Eintrag
[Disc] oder [USB] und drücken Sie ENTER ( ).
Zur Anzeige des Menüs [Home Link] muss
ein Server oder ein freigegebener Ordner
ausgewählt werden.
4. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
, eine
Dat
ei aus und drücken Sie zur Fotoanzeige
auf ENTER ( ).
5. Drücken Sie die Taste DISPLAY (
) um das
Einstellungsmenü aufzurufen.
6. Wählen Sie mit den Tasten
U
/
u
den Eintrag
[Musik
auswahl] und drücken Sie ENTER ( )
um das Menü [Musikauswahl] aufzurufen.
HB985-DB.BDEUPPK_GER.indd 52HB985-DB.BDEUPPK_GER.indd 52 2010-05-14  2:06:552010-05-14  2:06:55
53
Betrieb
4
Betrieb
7. Wählen Sie mit den Tasten
U
/
u
ein Gerät
aus und drücken Sie ENTER ( ).
Das auswählbare Gerät ist vom Speicherort
der Fotodatei zur Vollbildanzeige abhängig.
Speicherort des
Fotos
Verfügbares Gerät
Disc Disc, USB
USB Disc, USB
Freigegebene
Ordner auf dem
PC (CIFS)
CIFS
DLNA-Server DLNA-Server
8. Wählen Sie mit den Tasten
U
/
u
eine Dat
ei
oder einen Ordner zur Wiedergabe aus.
Wählen Sie einen Ordner und drücken
Sie ENTER ( ), um zum untergeordneten
Verzeichnis zu gelangen.
Markieren Sie das Symbol
und drücken
Sie ENTER (
), um zum übergeordneten
Verzeichnis zu gelangen.
HINWEIS
Bei der Musikauswahl unter [Home Link] werden
keine Ordner angezeigt. Unter [Home Link] können
ausschließlich Dateien ausgewählt werden.
9. Wählen Sie zur Auswahl der Musiktitel mit
den Tasten
i
den Eintrag [OK] und drücken
Sie ENTER ( ).
Musik hören
Mit dem Player können Audio-CDs und
Musikdateien wiedergegeben werden.
1. Drücken Sie die Taste
HOME MENU
2. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
den
Eintrag [Musik] und drücken Sie ENTER ( ).
3. Wählen Sie mit den Tasten
I
/
i
das Gerät
aus und drücken Sie ENTER ( ).
Beim Anschluss von bis zu zwei Geräten
erscheint diese Anzeige.
4. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
eine
Musikdatei oder einen Audiotrack aus und
drücken Sie zur Wiedergabe auf ENTER (
).
HINWEIS
Die Dateianforderungen  nden Sie auf Seite 11.
Es sind verschiedene Wiedergabefunktionen
möglich. Siehe Seiten 40-47.
HB985-DB.BDEUPPK_GER.indd 53HB985-DB.BDEUPPK_GER.indd 53 2010-05-14  2:06:552010-05-14  2:06:55
54
Betrieb
Betrieb
4
Audio-CD kopieren
Auf einem USB-Speichergerät können einer
oder alle Titel einer Audio-CD aufgenommen
werden.
1. Schließen Sie das USB-Speichergerät an den
USB-Anschluss auf dem Bedienungsfeld an.
2. Drücken Sie die Taste
Z
(OPEN/CLOSE) und
legen Sie eine Audio-CD in das Disc-Fach.
Drücken Sie auf
Z
(OPEN/CLOSE), um das
Disc-Fach zu schließen. Die Wiedergabe
wird automatisch gestartet.
3. Drücken Sie die Taste DISPLAY (
), um das
Einstellungsmenü aufzurufen.
Oder
Drücken Sie die Taste
z
USB REC auf der
Fernbedienung. Es können alle Musiktitel
einer Audio-CD aufgenommen werden.
4. Wählen Sie mit den Tasten
U
/
u
die Funktion
[CD-Aufn.] und drücken Sie ENTER (
), um
das Menü [CD-Aufn.] aufzurufen.
Wiederholen Sie diesen Schritt zur Auswahl
weiterer Titel.
5. Wählen Sie mit den Tasten
U
/
u
im Menü
einen Track zum Kopieren aus und drücken
Sie ENTER (
).
Wiederholen Sie diesen Schritt zur Auswahl
weiterer Titel.
Alle Titel auf einer Audio-CD
auswählen.
Wählen Sie im Popup-Menü eine
Encoding-Option (128 Kbps, 192
Kbps, 320 Kbps oder Verlustfrei).
Aufnahme abbrechen und
zum vorherigen Bildschirm
zurückkehren.
6. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
die
Option [Start] und drücken Sie ENTER (
).
7. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
einen
Zielordner zum Kopieren aus.
Um einen neuen Ordner zu erstellen,
wählen Sie mit den Tasten
U
/
u
/
I
/
i
den
Eintrag [Neuer Ordner] und drücken Sie
ENTER ( ).
Geben Sie über die virtuelle Tastatur einen
Ordnernamen ein, markieren Sie die Option
[OK] und drücken Sie ENTER ( ).
8. Markieren Sie mit den Tasten
U
/
u
/
I
/
i
die
Option [OK] und drücken Sie ENTER (
),
um die Audio-CD zu kopieren.
Um den Kopiervorgang einer Audio-CD
abzubrechen, markieren Sie die Option
[Abbrechen] und drücken Sie ENTER ( ).
9. Bei Abschluss des Kopiervorgangs
der Audio-CD wird eine Mitteilung
eingeblendet. Drücken Sie auf ENTER
(
), um die im Zielordner erstellte
Musikdatei anzuzeigen.
HB985-DB.BDEUPPK_GER.indd 54HB985-DB.BDEUPPK_GER.indd 54 2010-05-14  2:06:562010-05-14  2:06:56
55
Betrieb
4
Betrieb
HINWEIS
In der folgenden Tabelle  nden Sie die
durchschnittlichen Aufnahmedauer am
Beispiel einer Musikdatei mit vier Minuten
Wiedergabedauer bei 192 kbps.
Stop-Modus Während der
Wiedergabe
1,4 Min. 2 min.
Bei den angegebenen Zeiten handelt es sich um
Näherungswerte.
Die tatsächliche Kopierdauer für ein USB-
Speichergerät kann je nach den Merkmalen des
USB-Speichergerätes variieren.
Zur Aufnahme auf einem USB-Speichergerät
sind mindestens 50 MB freier Speicher
erforderlich.
Für eine korrekte Aufnahme sollte ein Musiktitel
mindestens 20 Sekunden lang sein.
Während des Kopiervorgangs einer Audio-
CD darf der Player nicht ausgeschaltet und
das angeschlossene USB-Speichergerät nicht
getrennt werden.
Die unerlaubte Vervielfältigung kopiergeschützter
Inhalte, einschließlich Computerprogramme,
Dateien, Sendungen und Tonaufnahmen, stellt
eine Verletzung des Urheberrechts dar und wird
strafrechtlich verfolgt.
Dieses Gerät sollte nicht für solche Zwecke
eingesetzt werden.
Zeigen Sie Verantwortung
Beachten Sie das Urheberrecht
HB985-DB.BDEUPPK_GER.indd 55HB985-DB.BDEUPPK_GER.indd 55 2010-05-14  2:06:562010-05-14  2:06:56
56
Betrieb
Betrieb
4
Wiedergabe von
einem iPod
Sie können die Musik auf Ihrem iPod
wiedergeben. Weitere Hinweise  nden Sie in
der Bedienungsanleitung des iPod.
Vorbereitung
Videos und Fotos eines iPod auf dem
Bildschirm anzeigen.
- Der Videoanschluss sollte über die VIDEO
OUT-Buchse auf der Rückseite dieses
Gerätes erfolgen. Einen geeigneten
Videoeingangsmodus für den Fernseher
wählen.
- Wählen Sie je nach iPod-Modell das Menü
Videos > Video-Einstellungen und stellen
Sie die Option TV-Ausgang am iPod auf
Fragen oder Ein ein.
Weitere Hinweise zu Video-Einstellungen
nden Sie in der Bedienungsanleitung des
iPod.
-
Fotos können nur im iPod-Eingangsmodus
und nur als Diashow angezeigt werden. Zur
Anzeige der Fotos auf dem Fernseher muss
die Diashow auf dem iPod gestartet werden.
Weitere Hinweise zu Diashows  nden Sie in
der Bedienungsanleitung des iPod.
Schalten Sie dieses Gerät vor dem Anschluss
des iPod und stellen Sie die Lautstärke auf
ein Minimum ein.
1. Schließen Sie den iPod fest an.
Schließen Sie den iPod an
Schließen Sie das Dock
an und stellen Sie den
iPod darauf.
2. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
, eine
Datei aus und drücken Sie zur Wiedergabe
auf ENTER (
).
iPod-Inhalte auf dem
Bildschirm anzeigen
1. Schließen Sie den iPod fest an.
2. Drücken Sie die Taste HOME MENU (
).
3. Wählen Sie mit den Tasten
I
/
i
die Option
[Musik] oder [Spiel
lm] und drücken Sie
ENTER (
).
Wählen Sie bei Anschluss eines anderen
Gerätes (CD oder USB) im Menü den Eintrag
iPod.
4. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
einen
Inhalt und drücken Sie ENTER (
).
HB985-DB.BDEUPPK_GER.indd 56HB985-DB.BDEUPPK_GER.indd 56 2010-05-14  2:06:562010-05-14  2:06:56
57
Betrieb
4
Betrieb
Bedienung des iPod im iPod-
Modus
Ihr iPod lässt sich über die mitgelieferte
Fernbedienung sowie über die Tasten am iPod
bedienen.
1. Schließen Sie den iPod fest an.
Beim Einschalten dieses Gerätes wird der
iPod automatisch mit eingeschaltet und
aufgeladen.
2. Wählen Sie mit der Taste INPUT/TUNER den
iPod-Eingangsmodus.
U
/
u
/
I
/
i
Auswahl einer Option in einem
Menü.
B
/
ENTER
Musik- oder Videowiedergabe
starten.
X
Wiedergabe unterbrechen.
Drücken Sie zum Fortsetzen
der Wiedergabe nochmals auf
B
(PLAY).
m
/
M
Schneller Vor- oder Rücklauf
eines Titels oder Videos.
.
/
>
Titel vor oder zurück
überspringen.
REPEAT Auswahl eines gewünschten
Wiederholungsmodus: Track
(
), Alle ( ), Aus (Keine
Anzeige).
HINWEIS
Dieses System ist mit dem Ton und dem Bild eines
iPod (4. Generation), iPod nano, iPod classic, iPod
mini, iPod touch und iPhone kompatibel.
(iPod shu e wird nicht unterstützt).
HINWEIS
Die Fehlermeldung “IPOD PRÜFEN” oder
Angeschlossenes iPod-Modell wird nicht
unterstützt. wird angezeigt, wenn:
-
Ihr iPod eine bestimmte Funktion nicht unterstützt.
Die Fehlermeldung “IPOD PRÜFEN” oder “Bitte
Software des iPod aktualisieren. wird angezeigt,
wenn:
- Ihr iPod eine ältere Software-Version besitzt.
t
Aktualisieren Sie die Software des iPod auf
die neueste Version.
Falls dieses Gerät eine Fehlermeldung
anzeigt, befolgen Sie die Anweisungen. Die
Fehlermeldung “IPOD PRÜFEN” oder “Bitte iPod
prüfen. wird angezeigt, wenn:
- Keine Verbindung zwischen diesem Gerät und
dem iPod hergestellt werden konnte.
t
Nehmen Sie den iPod vom Dock dieses
Gerätes und setzen Sie es wieder ein.
- Ihr iPod nicht fest angeschlossen ist.
- Ihr iPod von diesem Gerät als unbekanntes
Gerät erkannt wurde.
- Ihr iPod kaum aufgeladen ist.
t
Die Batterie muss aufgeladen werden.
t
Das Au aden einer sehr erschöpften
Batterie des iPod dauert u. U. etwas länger.
Für eine höhere Stabilität des iPod können Sie den
üblicherweise mit dem iPod gelieferten Dock-
Adapter verwenden. Falls Sie keinen Adapter
besitzen, wenden Sie sich an Ihren iPod-Händler.
Die Kompatibilität mit Ihrem iPod richtet sich
nach dem jeweiligen Modell.
Die Bedienung von iPod touch und iPhone
unterscheidet sich von der Bedienung
eines iPod. Zur Bedienung mit diesem Gerät
benötigen Sie u. U. eine zusätzliche Steuerung.
(z. B. “Slide to Unlock”)
Bei Verwendung eines Anwendungsprogramms,
bei einem Anruf oder beim Senden und
Empfangen von SMS-Nachrichten usw. bei
einem iPod touch oder iPhone, trennen Sie
zuvor den iPod vom iPod Dock dieses Gerätes.
Je nach Software-Version des iPod kann der iPod
nicht über dieses Gerät bedient werden. Wir
empfehlen die Aktualisierung auf die aktuelle
Software-Version.
Die Bildqualität ist abhängig von den
Videoquellen des iPod.
Falls Sie ein Problem mit Ihrem iPod haben,
besuchen Sie die Webseite
www.apple.com/de/support/ipod/.
HB985-DB.BDEUPPK_GER.indd 57HB985-DB.BDEUPPK_GER.indd 57 2010-05-14  2:06:562010-05-14  2:06:56
58
Betrieb
Betrieb
4
Radiobetrieb
Die Antenne muss angeschlossen sein.
(Siehe Seite 24.)
Radio hören
1. Drücken Sie die Taste INPUT/TUNER, bis
die Anzeige Tuner (FM) im Anzeigefenster
erscheint. Der zuletzt empfangene Sender
wird eingestellt.
2. Halten Sie die Taste TUNE (-/+) ca.
zwei Sekunden lang gedrückt, bis die
Frequenzanzeige beginnt zu laufen,
und lassen Sie die Taste dann los.
Die Sendersuche stoppt, sobald ein
Radiosender empfangen wird. Oder
Drücken Sie mehrmals auf TUNE (-/+).
3. Stellen Sie über den Lautstärkeregler
VOLUME auf dem Bedienungsfeld oder über
die Tasten VOL (+/-) auf der Fernbedienung
die Lautstärke ein.
Speichern von Radiosendern
Es können 50 UKW-Sender gespeichert werden.
Vor der Sendersuche sollte die Lautstärke
verringert werden.
1. Drücken Sie die Taste INPUT/TUNER, bis
die Anzeige TUNER (FM) im Anzeigefenster
erscheint.
2. Stellen Sie mit den Tasten TUNE (-/+) die
gewünschte Frequenz ein.
3. Drücken Sie die Taste ENTER (
), bis eine
Speicherplatznummer im Anzeigefenster
blinkt.
4. Wählen Sie mit den Tasten PRESET die
gewünschte Speicherplatznummer.
5. Drücken Sie ENTER (
). Der Radiosender
wird gespeichert.
6. Wiederholen Sie die Schritte 2 bis 5, um
weitere Sender zu speichern.
Alle gespeicherten Sender
löschen
Halten Sie die Taste CLEAR zwei Sekunden lang
gedrückt. Daraufhin erscheint die Meldung
ALLE LÖSCHEN”. Daraufhin werden alle
gespeicherten Sender gelöscht.
Schlechten UKW-Empfang
verbessern
Drücken Sie blaue Taste D (MONO/STEREO) auf
der Fernbedienung. Ändern der Einstellung
von Stereo nach Mono zur Verbesserung des
Empfangs.
Siehe die Hinweise über
Radiosender
Der UKW-Tuner ist mit der RDS-Funktion (Radio
Data System) ausgestattet. Hierbei werden
Information über den gerade eingestellten
Radiosender angezeigt. Drücken Sie mehrmals
die Taste RDS, um die verschiedenen
Datentypen zu durchlaufen:
PS (Name des Programmdienstes)
Der Name des Kanals erscheint in
der Anzeige.
PTY (Programmarterkennung)
Die Programmart (z. B. Jazz oder
Nachrichten) erscheint in der
Anzeige.
RT (Radiotext)
Textmeldungen mit
Sonderinformationen des Senders.
Der Text läuft u. U. über die
Anzeige.
CT
(Vom Sender ausgestrahlte Uhrzeit)
Anzeige des vom Sender
ausgestrahlten Datums und der
Uhrzeit.
HB985-DB.BDEUPPK_GER.indd 58HB985-DB.BDEUPPK_GER.indd 58 2010-05-14  2:06:562010-05-14  2:06:56
59
Betrieb
4
Betrieb
Wiedergabe über das
Heimnetzwerk
Mit diesem Player können bei bestehender
Heimnetzwerkverbindung auf einem
PC oder auf DLNA-zerti zierten Medien-
Servern gespeicherte Inhalte angezeigt und
wiedergegeben werden.
Über DLNA
Dieser Player ist ein DLNA-zerti zierter digitaler
Medien-Player, mit dem Film-, Foto- und
Musikinhalte über einen DLNA-kompatiblen
digitalen Medien-Server (PC und
Unterhaltungselektronik) angezeigt und
wiedergegeben werden können.
Bei der Digital Living Network Alliance
(DLNA) handelt es sich um eine
branchenübergreifende Organisation
für Unterhaltungselektronik, die
Computerbranche und Unternehmen für
tragbare Geräte. Digital Living ermöglicht
dem Verbraucher die einfache gemeinsame
Nutzung digitaler Medien über ein Netzwerk
zu Hause.
Das Logo der DLNA-Zerti zierung
kennzeichnet alle Produkte, die dem DLNA
Interoperability Guidelines entsprechen.
Dieses Gerät erfüllt die DLNA Interoperability
Guidelines v1.5.
Bei der Verbindung eines PCs mit DLNA-
Server-Software oder einen anderen DLNA-
kompatiblen Gerätes mit diesem Player
müssen u. U. einige Einstellungen der Software
oder anderer Geräte vorgenommen werden.
Weitere Information  nden Sie in der
Bedienungsanleitung der jeweiligen Software
bzw. des Gerätes.
Zugri auf den DLNA-Medien-
Server
1. Überprüfen Sie die Netzwerkverbindung
und -einstellungen (Seiten 28-30).
2. Drücken Sie die Taste
HOME MENU.
3. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
, den
Eintrag [Home Link] und drücken Sie ENTER
(
).
4. Wählen Sie mit den Tasten
U
/
u
einen
DLNA-Medien-Server aus der Liste und
drücken Sie ENTER ( ).
Um die Suche nach verfügbaren Medien-
Servern zu wiederholen, drücken Sie die
grüne Taste (B).
HINWEIS
Abhängig vom jeweiligen Medien-Server benötigt
dieser Player u. U. eine Genehmigung des Servers.
5. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
eine
Datei aus und drücken Sie zur Wiedergabe
auf ENTER ( ).
HB985-DB.BDEUPPK_GER.indd 59HB985-DB.BDEUPPK_GER.indd 59 2010-05-14  2:06:562010-05-14  2:06:56
60
Betrieb
Betrieb
4
HINWEIS
Die Dateianforderungen  nden Sie auf Seite 11.
Es sind verschiedene Wiedergabefunktionen
möglich. Siehe Seiten 40-47.
Die auf Seite 11 angegebenen
Dat
eianforderungen sind u. U. nicht immer
kompatibel. Je nach den Dateimerkmalen
und Fähigkeiten des Medien-Servers gelten
möglicherweise verschiedene Einschränkungen.
Die Miniaturansicht nicht abspielbarer Dateien
wird zwar im Menü [Home Link] angezeigt, diese
Dateien können jedoch nicht auf diesem Player
wiedergegeben werden.
Der Player überspringt nicht abspielbare
Musik
dateien im Menü [Home Link] und spielt
die nächste Datei.
Untertiteldatei und Filmdatei müssen den
gleichen Namen besitzen und müssen sich im
selben Ordner be nden.
Die Qualität der Wiedergabe und Bedienung
der [Home Link]-Funktion kann durch
die Bedingungen des Heimnetzwerkes
beeinträchtigt werden.
Dateien auf einem Wechseldatenträger wie
einem USB- oder DVD-Laufwerk am Medien-
Server werden u. U. nicht korrekt freigegeben.
Zugri auf einen freigegebenen
Ordner auf dem PC
1. Starten Sie den mit dem lokalen Netzwerk
verbundenen PC.
2. Geben Sie auf dem PC die Ordner mit
Filmen, Fotos oder Musikdateien frei.
3. Überprüfen Sie die Netzwerkverbindung
und -einstellungen (Seiten 28-30).
4. Drücken Sie die Taste
HOME MENU.
5. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
den
Eintrag [Home Link] und drücken Sie ENTER
(
).
6. Wählen Sie mit den Tasten
U
/
u
einen
freigegebenen Ordner und drücken Sie
ENTER (
).
Um die Suche nach verfügbaren Medien-
Servern zu wiederholen, drücken Sie die
grüne Taste (B).
HINWEIS
Je nach Kon guration müssen für den Zugri
auf einen freigegebenen Ordner u. U. die
Benutzerkennung und das Kennwort für den
Netzwerkzugri angegeben werden.
7. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
eine
Datei aus und drücken Sie zur Wiedergabe
auf ENTER ( ).
HB985-DB.BDEUPPK_GER.indd 60HB985-DB.BDEUPPK_GER.indd 60 2010-05-14  2:06:562010-05-14  2:06:56
61
Betrieb
4
Betrieb
HINWEIS
Die Dateianforderungen  nden Sie auf Seite 11.
Es sind verschiedene Wiedergabefunktionen
möglich. Siehe Seiten 40-47.
Die Miniaturansicht nicht abspielbarer Dateien
wird zwar im Menü [Home Link] angezeigt, diese
Dateien können jedoch nicht auf diesem Player
wiedergegeben werden.
Der Player überspringt nicht abspielbare
Musikdateien im Menü [Home Link] und spielt
die nächste Datei.
Untertiteldatei und Filmdatei müssen den
gleichen Namen besitzen und müssen sich im
selben Ordner be nden.
Die Qualität der Wiedergabe und Bedienung
der [Home Link]-Funktion kann durch
die Bedingungen des Heimnetzwerkes
beeinträchtigt werden.
Dateien auf einem Wechseldatenträger wie
einem am PC angeschlossenen USB- oder DVD-
Laufwerk werden u. U. nicht korrekt freigegeben.
Je nach Kon guration des PCs können
Verbindungsprobleme auftreten.
Systemvoraussetzungen
Windows® XP (Service-Pack 2 oder
höher), Windows Vista® (kein Service-Pack
erforderlich)
Windows 7®
1,2 GHz Intel® Pentium® III- oder AMD
Sempron™ 2200+-Prozessor
Netzwerkumgebung: 100 MB Ethernet,
WLAN (IEEE 802.11b/g/n)
HINWEIS
Falls Sie das Betriebssystem Windows® XP oder
Windows Vista® verwenden, rufen Sie den
folgenden Link auf, um weitere Information zur
Dateifreigabe zu erhalten.
HB985-DB.BDEUPPK_GER.indd 61HB985-DB.BDEUPPK_GER.indd 61 2010-05-14  2:06:572010-05-14  2:06:57
62
Betrieb
Betrieb
4
Geben Sie die Benutzerkennung und
das Kennwort für das Netzwerk ein.
Je nach Kon guration des PCs müssen für den
Zugri auf einen freigegebenen Ordner u. U.
die Benutzerkennung und das Kennwort für
den Netzwerkzugri angegeben werden.
1. Falls eine Benutzerkennung und das
Kennwort für den Netzwerkzugri
eingegeben werden müssen, wird das
Tastaturmenü automatisch eingeblendet.
2. Wählen Sie mit den Tasten
U
/
u
/
I
/
i
das
erste Zeichen auf der Tastatur aus und
drücken Sie auf ENTER. (
).
Um einen Buchstaben mit Akzent
einzugeben, wählen Sie den gewünschten
Buchstaben aus den Sonderzeichen aus.
Beispiel: Wählen Sie den Buchstaben “D”
und drücken Sie die Taste DISPLAY ( ), um
die Sonderzeichen anzuzeigen. Wählen Sie
nun mit den Tasten
I
/
i
den Buchstaben “D
oder “Ď und drücken Sie ENTER (
).
[Löschen] – Alles eingegebenen Zeichen
löschen.
[Leer] – Fügt ein Leerzeichen ein.
[<–] – Löscht das vorangehende Zeichen.
[ABC / abc / #+-=&] – Tastatureinstellung
nach Groß- oder Kleinbuchstaben oder
Symbolen ändern.
3. Markieren Sie nach der Eingabe der
Netzwerk-Benutzerkennung und des
Kennworts mit den Tasten
U
/
u
/
I
/
i
die
Option [OK] und drücken Sie ENTER (
),
um den Ordner zu ö nen.
Die Netzwerk-Benutzerkennung und das
Kennwort werden nach dem ersten Zugri
auf den Ordner gespeichert. Falls Netzwerk-
Benutzerkennung und Kennwort nicht
gespeichert werden sollen, drücken Sie die
rote Taste (A) und heben Sie die Markierung
im Kontrollkästchen [Merken] vor dem
Zugri auf den Ordner auf.
HB985-DB.BDEUPPK_GER.indd 62HB985-DB.BDEUPPK_GER.indd 62 2010-05-14  2:06:572010-05-14  2:06:57
63
Wartung
5
Wartung
Hinweise zu Discs
Handhabung von Discs
Bringen Sie auf keiner der beiden Seiten der
Disc Papier oder Aufkleber an.
Aufbewahrung von Discs
Legen Sie die Disc nach der Wiedergabe
wieder in die zugehörige Hülle. Setzen Sie
die Disc keiner direkten Sonneneinstrahlung
oder Wärmequellen aus und lassen Sie sie nie
in einem Auto liegen, das direkt in der Sonne
geparkt wird.
Reinigung von Discs
Verwenden Sie keine starken Lösungsmittel
wie Alkohol, Benzin, Verdünner, handelsübliche
Reiniger oder für Schallplatten vorgesehene
Antistatik-Sprays.
Handhabung des
Gerätes
Transport und Versand des Gerätes
Bewahren Sie den Original-Versandkarton und
das Verpackungsmaterial auf. Wenn Sie das
Gerät einsenden müssen, verpacken Sie es
wieder so, wie es ab Werk geliefert wurde, um
es optimal zu schützen.
Außenseiten sauber halten
Verwenden Sie keine  üchtigen
Flüssigkeiten wie Insektensprays in der
Nähe des Gerätes.
Durch zu starken Druck beim Abwischen
können die Ober ächen beschädigt werden.
Gummi- oder Plastikteile sollten nicht über
einen längeren Zeitraum mit dem Gerät in
Kontakt sein.
Reinigung des Gerätes
Reinigen Sie den Player mit einem weichen,
trockenen Tuch. Wenn die Ober äche stark
verschmutzt ist, verwenden Sie ein mit einer
milden Putzmittellösung angefeuchtetes
weiches Tuch. Verwenden Sie keine starken
Lösungsmittel wie Alkohol, Benzin oder
Verdünner, da sie die Ober äche des Gerätes
angreifen können.
P ege des Gerätes
Bei diesem Gerät handelt es sich um ein
High-Tech-Präzisionsgerät. Die Bildqualität
verschlechtert sich, wenn die Linse und
Teile des Disc-Laufwerks verschmutzt bzw.
abgenutzt sind. Detaillierte Hinweise erhalten
Sie bei Ihrem Kundendienst-Center.
5
Wartung
HB985-DB.BDEUPPK_GER.indd 63HB985-DB.BDEUPPK_GER.indd 63 2010-05-14  2:06:572010-05-14  2:06:57
64
Störungsbehebung
Störungsbehebung
6
6
Störungsbehebung
Allgemein
Das Gerät lässt sich nicht
einschalten.
Schließen Sie das Netzkabel an eine Steckdose an.
Das Gerät startet die
Wiedergabe nicht.
Eine spielbare Disc einlegen. (Disc-Typ, Farbnorm und
Ländercode überprüfen.)
Disc mit der Wiedergabeseite nach unten einlegen.
Disc richtig in die Mulde im Disc-Fach einlegen.
Die Disc reinigen.
Einstufung aufheben oder Freigabestufe ändern.
Der Kamerawinkel kann
nicht geändert werden.
Die wiedergegebene DVD Video-Disc enthält keine weiteren
Kamerawinkel.
Die Untertitelsprache lässt
sich nicht ändern oder wird
nicht angezeigt.
Die wiedergegebene Video-DVD enthält keine Untertitel.
MP3-/WMA-/JPEG-/DivX-
Dateien lassen sich nicht
wiedergeben.
Die Dateien wurden in einem vom Gerät nicht unterstützten
Format erstellt.
Der Codec der Filmdatei wird nicht unterstützt.
Die BD-LIVE-Funktion ist
nicht möglich.
Die Fernbedienung ist nicht auf den Fernbedienungs-Sensor
des Gerätes gerichtet.
Die Fernbedienung ist zu weit vom Gerät entfernt.
Zwischen Fernbedienung und Gerät be ndet sich ein
Hindernis.
Die Batterien der Fernbedienung sind schwach.
HB985-DB.BDEUPPK_GER.indd 64HB985-DB.BDEUPPK_GER.indd 64 2010-05-14  2:06:572010-05-14  2:06:57
65
Störungsbehebung
6
Störungsbehebung
Bild
Kein Bild. Wählen Sie den richtigen Video-Eingangsmodus des
Fernsehers, so dass das Bild des Gerätes angezeigt wird.
Videokabel fest anschließen.
Überprüfen Sie, ob für die Option [HDMI-Farbeinst.] im Menü
[Setup] eine geeignete Einstellung vorgenommen wurde, die
dem Videoanschluss entspricht.
Falls Ihr Fernsehgerät die am Player eingestellte Au ösung
nicht unterstützt, wählen Sie eine vom Fernsehgerät
unterstützte Au ösung.
An der HDMI OUT-Buchse des Players ist ein DVI-Gerät
angeschlossen, dass den Kopierschutz nicht unterstützt.
Verzerrtes Bild. Die wiedergegebene Disc wurde in einer Farbnorm
aufgenommen, die das Fernsehgerät nicht unterstützt.
Wählen Sie eine vom Fernseher unterstützte Au ösung.
Ton
Kein oder verzerrter Ton. Das Gerät führt gerade einen Suchlauf oder eine Wiedergabe
in Zeitlupe durch oder be ndet sich im Pause-Modus.
Die Lautstärke ist zu gering.
Überprüfen Sie die Lautsprecheranschlüsse. (Seite 16)
HB985-DB.BDEUPPK_GER.indd 65HB985-DB.BDEUPPK_GER.indd 65 2010-05-14  2:06:572010-05-14  2:06:57
66
Störungsbehebung
Störungsbehebung
6
Netzwerk
Die BD-LIVE-Funktion ist
nicht möglich.
Auf dem angeschlossenen USB-Speichergerät ist nicht
genügend Speicher verfügbar. Schließen Sie ein USB-
Speichergerät mit mindestens 1 GB freiem Speicher an.
Stellen Sie sicher, dass das Gerät richtig mit dem lokalen
Netzwerk verbunden und auf das Internet zugreifen kann
(siehe Seite 28).
Die Breitbandgeschwindigkeit ist zur Nutzung von BD-
LIVE-Funktionen nicht schnell genug. Wenden Sie sich
an Ihren Internet-Dienstanbieter (ISP) und lassen Sie die
Breitbandgeschwindigkeit erhöhen.
Die Option [BD-LIVE-Verbindung] wurde im [Setup]-Menü
auf [Nicht zulässig] eingestellt. Stellen Sie die Option auf
[Zulässig] ein.
Änderungen der Ausführung und der technischen Daten ohne vorherige Ankündigung
vorbehalten.
Updates
Informationen zu diesem Produkt erhalten Sie auf der Pioneer-Webseite. Hier  nden Sie
Hinweise zur Aktualisierung und Wartung des Blu-ray-Disc-PLAYERS.
HB985-DB.BDEUPPK_GER.indd 66HB985-DB.BDEUPPK_GER.indd 66 2010-05-14  2:06:572010-05-14  2:06:57
67
Anhang
7
Anhang
Bedienung eines
Fernsehgerätes über
die mitgelieferte
Fernbedienung
Dieser PIONEER Fernseher wird mit folgenden
Tasten bedient.
TV-
Steuerungs-
tasten
Taste Funktion
1
(TV Power)
Fernseher ein-/ausschalten.
INPUT
Eingangsquelle des
Fernsehers zwischen TV und
anderen Quellen umschalten.
CH +/- Umschalten der
gespeicherten Sender nach
oben/nach unten.
VOL +/- Lautstärke des Fernsehers
einstellen.
HINWEIS
Je nach angeschlossenem Gerät sind bestimmte
Tasten für Ihren Fernseher ohne Funktion.
Fernbedienung zur Bedienung
Ihres Fernsehgerätes einstellen
Sie können Ihren vorhandenen Fernseher über
die mitgelieferte Fernbedienung bedienen.
Falls Ihr Fernseher in der folgenden Tabelle
aufgeführt wird, stellen Sie die jeweilige
Herstellerkennung ein.
1. Halten Sie die Taste
1
(TV POWER) gedrückt
und geben Sie den Herstellercode Ihres
Fernsehers über die Nummerntasten ein
(siehe folgende Tabelle).
Hersteller Codenummer
Pioneer
1(Standardeinstel-
lung)
Sony 2, 3
Panasonic 4, 5
Samsung 6, 7
LG 8, 9
2. Lassen Sie die Taste
1
(TV POWER) wieder
los, um die Einstellung zu übernehmen.
Je nach Modell Ihres Fernsehers funktionieren
u. U. einige oder keine der Tasten mit dem
Gerät, selbst wenn der richtige Herstellercode
eingegeben wurde. Beim Austauschen der
Batterien der Fernbedienung wird diese
eingegebene Codenummer möglicherweise
auf die Standardeinstellung zurückgesetzt.
In diesem Fall muss die jeweilige Codenummer
erneut eingegeben werden.
7
Anhang
HB985-DB.BDEUPPK_GER.indd 67HB985-DB.BDEUPPK_GER.indd 67 2010-05-14  2:06:572010-05-14  2:06:57
68
Anhang
Anhang
7
Liste der Ländercodes
Wählen Sie einen Ländercode aus der Liste.
Land Code Land Code Land Code Land Code
Afghanistan AF
Argentinien AR
Australien AU
Österreich AT
Belgien BE
Bhutan BT
Bolivien BO
Brasilien BR
Kambodscha KH
Kanada CA
Chile CL
China CN
Kolumbien CO
Republik Kongo CG
Costa Rica CR
Kroatien HR
Tschechische
Republik CZ
Dänemark DK
Ecuador EC
Ägypten EG
El Salvador SV
Äthiopien ET
Fiji FJ
Finnland FI
Frankreich FR
Deutschland DE
Großbritannien GB
Griechenland GR
Grönland GL
Hongkong HK
Ungarn HU
Indien IN
Indonesien ID
Israel IL
Italien IT
Jamaika JM
Japan JP
Kenia KE
Kuwait KW
Libyen LY
Luxemburg LU
Malaysia MY
Malediven MV
Mexiko MX
Monaco MC
Mongolei MN
Marokko MA
Nepal NP
Niederlande NL
Niederländische
Antillen AN
Neu Seeland NZ
Nigeria NG
Norwegen NO
Oman OM
Pakistan PK
Panama PA
Paraguay PY
Philippinen PH
Polen PL
Portugal PT
Rumänien RO
Russische
Föderation RU
Saudi Arabien SA
Senegal SN
Singapur SG
Slowakische
Republik SK
Slowenien SI
Südafrika ZA
Südkorea KR
Spanien ES
Sri Lanka LK
Schweden SE
Schweiz CH
Taiwan TW
Thailand TH
Türkei TR
Uganda UG
Ukraine UA
USA US
Uruguay UY
Usbekistan UZ
Vietnam VN
Simbabwe ZW
HB985-DB.BDEUPPK_GER.indd 68HB985-DB.BDEUPPK_GER.indd 68 2010-05-14  2:06:572010-05-14  2:06:57
69
Anhang
7
Anhang
Liste der Sprachcodes
Verwenden Sie diese Liste zur Einstellung der gewünschten Sprache für die folgenden
Voreinstellungen: [Disc-Audio], [Disc-Untertitel] und [Disc-Menü].
Sprache Code Sprache Code Sprache Code Sprache Code
Afar 6565
Afrikaans 6570
Albanisch 8381
Amharisch 6577
Arabisch 6582
Armenisch 7289
Assamesisch 6583
Aymara 6588
Aserbeidschanisch
6590
Baschkirisch 6665
Baskisch 6985
Bengali, Bangla 6678
Bhutanisch 6890
Bihari 6672
Bretonisch 6682
Bulgarisch 6671
Myanmarisch 7789
Weißrussisch 6669
Chinesisch 9072
Kroatisch 7282
Tschechisch 6783
Dänisch 6865
Niederländisch 7876
Englisch 6978
Esperanto 6979
Estnisch 6984
Faroerisch 7079
Fiji 7074
Finnisch 7073
Französisch 7082
Friesisch 7089
Galizisch 7176
Georgisch 7565
Deutsch 6869
Griechisch 6976
Grönländisch 7576
Guarani 7178
Gujarati 7185
Haussa 7265
Hebräisch 7387
Hindi 7273
Ungarisch 7285
Isländisch 7383
Indonesisch 7378
Interlingua 7365
Irisch 7165
Italienisch 7384
Japanisch 7465
Kanadisch 7578
Kaschmir 7583
Kasachisch 7575
Kirgisisch 7589
Koreanisch 7579
Kurdisch 7585
Laotisch 7679
Lateinisch 7665
Lettisch 7686
Lingala 7678
Litauisch 7684
Mazedonisch 7775
Madagassisch 7771
Malaiisch 7783
Malajalam 7776
Maori 7773
Marathi 7782
Moldawisch 7779
Mongolisch 7778
Nauru 7865
Nepalesisch 7869
Norwegisch 7879
Oriya 7982
Pandschabi 8065
Paschtu 8083
Persisch 7065
Polnisch 8076
Portugiesisch 8084
Quechua 8185
Retoromanisch 8277
Rumänisch 8279
Russisch 8285
Samoanisch 8377
Sanskrit 8365
Schottisch (Gälisch)
7168
Serbisch 8382
Serbo-Kroatisch 8372
Shona 8378
Sindhi 8368
Singalesisch 8373
Slowakisch 8375
Slowenisch 8376
Spanisch 6983
Sudanesisch 8385
Swahili 8387
Schwedisch 8386
Tagalog 8476
Tadschikisch 8471
Tamilisch 8465
Telugu 8469
Thai 8472
Tongalesisch 8479
Türkisch 8482
Turkmenisch 8475
Twi 8487
Ukrainisch 8575
Urdu 8582
Usbekisch 8590
Vietnamesisch 8673
Volapük 8679
Walisisch 6789
Wolof 8779
Xhosa 8872
Jiddish 7473
Yoruba 8979
Zulu 9085
HB985-DB.BDEUPPK_GER.indd 69HB985-DB.BDEUPPK_GER.indd 69 2010-05-14  2:06:572010-05-14  2:06:57
70
Anhang
Anhang
7
Video-Ausgabeau ösung
Bei der Wiedergabe von Datenträgern ohne Kopierschutz
Videoausgang
Auflösung
HDMI OUT
COMPONENT VIDEO OUT
mit HDMI Anschluss ohne HDMI Anschluss
576i (480i) 576p (480i) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 720p
1080i 1080i 1080i
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 1080i
1080p / 50 Hz 1080p / 50 Hz 576i (480i) 1080i
Bei der Wiedergabe kopiergeschützter Datenträger
Videoausgang
Auflösung
HDMI OUT
COMPONENT VIDEO OUT
mit HDMI Anschluss ohne HDMI Anschluss
576i (480i) 576p (480p) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 576i (480i) 576p (480p)
1080i 1080i 576i (480i) 576p (480p)
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 576p (480p)
1080p / 50 Hz 1080p / 50 Hz 576i (480i) 576p (480p)
HDMI OUT-Anschluss
In der Einstellung 576i (480i) wird für
die HDMI OUT-Buchse eine tatsächliche
Au ösung von 576p (576p) eingestellt.
Falls Ihr Fernsehgerät die manuelle Auswahl
der Au ösung für ein an die HDMI-Buchse
angeschlossenes Fernsehgerät nicht zulässt,
wird die Au ösung auf [Auto] eingestellt.
Bei einer eingestellten Au ösung, die
Ihr Fernsehgerät nicht unterstützt, wird
eine Warnmeldung eingeblendet. Falls
nach dem Ändern der Au ösung kein
Bild angezeigt wird, warten Sie bitte 20
Sekunden, bis die vorherige Au ösung
automatisch wiederhergestellt wird.
Die Bildwiederholrate 1080p für den
Videoausgang wird dabei automatisch
auf 24 Hz oder 50 Hz eingestellt, je nach
Möglichkeiten und Voreinstellungen des
angeschlossenen Fernsehgerätes und
basierend auf der ursprünglichen Video-
Bildrate der BD-ROM-Disc.
COMPONENT VIDEO OUT-Anschluss
BD und DVD können eine Hochskalierung oder
analoge Ausgabe verhindern.
VIDEO OUT-Anschluss
Die Au ösung der VIDEO OUT-Buchse ist auf
576i (480i) festgelegt.
HB985-DB.BDEUPPK_GER.indd 70HB985-DB.BDEUPPK_GER.indd 70 2010-05-14  2:06:572010-05-14  2:06:57
71
Anhang
7
Anhang
“Blu-ray Disc” und sind Markenzeichen.
Das “BD-LIVE” Logo ist ein Markenzeichen von Blu-
ray Disc Association.
“BONUSVIEW ist ein Markenzeichen von Blu-ray
Disc Association.
Java und alle Java-basierten Markenzeichen und
Logos sind Markenzeichen oder eingetragene
Markenzeichen von Sun Microsystems, Inc. in den
Vereinigten Staaten und in anderen Ländern.
Hergestellt unter der Lizenz von Dolby
Laboratories. Dolby und das Doppel-D-Symbol
sind Markenzeichen von Dolby Laboratories.
Hergestellt unter folgenden U.S.-Patenten:
5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 und weitere U.S.- und
weltweite Patente ausgestellt und angemeldet.
DTS und das Symbol sind eingetragene
Markenzeichen, DTS-HD, DTS-HD Master Audio l
Essential und die DTS-Logos sind Markenzeichen
von DTS, Inc. Dieses Produkt beinhaltet Software.
© DTS, Inc.
HDMI, das HDMI Logo und High-De nition
Multimedia Interface sind Markenzeichen oder
eingetragene Markenzeichen von HDMI Licensing,
LLC in den Vereinigten Staaten und anderen
Ländern.
ist ein Markenzeichen von DVD Format/Logo
Licensing Corporation.
TM
DLNA und DLNA CERTIFIED sind Marken- und/
oder Dienstleistungszeichen von Digital Living
Network Alliance.
DivX® ist eine eingetragene Marke von DivX, Inc.
und ist lizenziert.
“x.v.Color oder “x.v.Colour” ist ein Markenzeichen
von Sony Corporation.
Marken und Lizenzen
HB985-DB.BDEUPPK_GER.indd 71HB985-DB.BDEUPPK_GER.indd 71 2010-05-14  2:06:582010-05-14  2:06:58
72
Anhang
Anhang
7
AVCHD” und das „AVCHD Logo sind
Markenzeichen von Panasonic Corporation und
Sony Corporation.
Dieses Produkt wurde lizenziert unter AVC Patent-
Lizenz und VC-1 Patent-Lizenz für den privaten
und nicht gewerblichen Einsatz des Kunden zur
(i) Codierung von Video in Übereinstimmung
mit den Normen AVC und VC-1 (“AVC/VC-1
Video”) und/oder (ii) Decodierung von AVC/
VC-1 Video, das vom Kunden für private und
nicht gewerbliche Zwecke codiert und/oder von
einem zugelassenen Video-Anbieter für AVC/
VC-1 Video bezogen wurde. Es darf und wird
keine Genehmigung für eine andere Verwendung
erteilt. Weitere Information erhalten Sie von MPEG
LA, LLC. Siehe http://www.mpegla.com.
iPod ist ein Markenzeichen von Apple Inc.,
eingetragen in den Vereinigten Staaten und
anderen Ländern.
iPhone ist ein Markenzeichen von Apple Inc.
Der Hinweis “Made for iPod” weist darauf hin,
dass ein elektronisches Gerät für den Anschluss
eines iPod entwickelt wurde und von Hersteller
als ein Gerät zerti ziert wurde, das den Apple-
Leistungsstandards entspricht.
Der Hinweis Works with iPhone weist darauf hin,
dass ein elektronisches Gerät für den Anschluss
eines iPhone entwickelt wurde und von Hersteller
als ein Gerät zerti ziert wurde, das den Apple-
Leistungsstandards entspricht.
Apple übernimmt keine Haftung für den Betrieb
dieses Gerät oder dessen Kompatibilität mit
Sicherheitsstandards und Richtlinien.
Windows Media ist entweder ein eingetragenes
Markenzeichen oder ein Markenzeichen von
Microsoft Corporation in den Vereinigten Staaten
und/oder in anderen Ländern.
Dieses Produkt verfügt über eine Technologie
der Microsoft Corporation und darf nicht ohne
Genehmigung von Microsoft Licensing, Inc. genutzt
oder vertrieben werden.
®
Die Bluetooth® Wireless-Technologie ermöglicht die
Funkübertragung zwischen elektronischen Geräten
innerhalb einer Reichweite von bis zu zehn Metern.
Bei der Verbindung mehrere Geräte über die
Bluetooth Wireless-Technologie fallen keinerlei
Gebühren an. Verbindungen mit Hilfe der Bluetooth
Wireless-Technologie über ein Mobiltelefon
können in Reihenschaltung betrieben werden.
Die Bluetooth Markennamen und Logos sind
Eigentum der Bluetooth SIG, Inc. Pioneer Corporation
besitzt eine Genehmigung für die Verwendung
dieser Marken. Alle anderen Markennamen und
Handelsbezeichnungen sind Eigentum der jeweiligen
Besitzer.
HB985-DB.BDEUPPK_GER.indd 72HB985-DB.BDEUPPK_GER.indd 72 2010-05-14  2:06:582010-05-14  2:06:58
73
Anhang
7
Anhang
Technische Daten
Allgemein
• Stromversorgung:
AC 220-240 V, 50/ 60 Hz
• Leistungsaufnahme:
150 W
Im Bereitschaftsmodus: Unter 0,5 W
Abmessungen (B x H x T):
Ca. 430 × 64 × 304 mm
Gesamtgewicht (ca.):
3.6 kg
• Betriebstemperatur:
5 °C bis 35 °C
Luftfeuchtigkeit bei Betrieb:
5 % bis 90 %
Stromversorgung über Bus (USB):
DC 5 V
500 mA
Eingänge/Ausgänge
• VIDEO OUT:
1,0 V (p-p), 75 Ω, negative Sync., Cinch-Buchse x 1
• COMPONENT VIDEO OUT:
(Y) 1,0 V (p-p), 75 Ω, negative Sync., Cinch-Buchse
x 1, (Pb)/(Pr) 0,7 V (p-p), 75 Ω, Cinch-Buchse x 2
HDMI IN/OUT (Video/Audio):
19-polig (HDMI-Norm, Typ A, Version 1.3)
Analog AUDIO IN:
2,0 Vrms (1 kHz, 0 dB), 600 Ω,
Cinch-Buchse (L, R) x 1
DIGITAL IN (OPTICAL 1/2):
3 V (p-p), Optische Buchse x 2
• PORTABLE IN:
0,5 Vrms (3,5 mm Stereo-Buchse)
Tuner
• UKW-Empfangsbereich:
87,5 bis 108,0 MHz oder 87.50 bis 108.00 MHz
Verstärker
Ausgangsleistung, (Spitze), (4 Ω/3 Ω)
Gesamt 1100 W
Vorn 180 W x 2
Mitte 180 W
Hinten 180 W x 2
Subwoofer 200 W (Passive)
• Ausgangsleistung, (RMS),
Geamtklirrfaktor 10 % (4 Ω/3 Ω)
Gesamt 930 W
Vorn 150 W x 2
Mitte 150 W
Hinten 150 W x 2
Subwoofer 180 W (Passiv)
System
• Laser:
Halbleiter-Laser
Wellenlänge: 405 nm / 650 nm
• Fernsehnorm:
Standard NTSC/PAL Farb-Fernsehnorm
• Frequenzbereich:
20 Hz bis 20 kHz (48 kHz-, 96 kHz-, 192 kHz-
Sampling)
• LAN-Anschluss:
Ethernet-Buchse x 1, 10BASE-T/100BASE-TX
HB985-DB.BDEUPPK_GER.indd 73HB985-DB.BDEUPPK_GER.indd 73 2010-05-14  2:06:582010-05-14  2:06:58
74
Anhang
Anhang
7
Lautsprecher BCS-707
S-BD707
• Vordere/Surround-Lautsprecher (Links/Rechts)
Typ: 2 Wege
Nennimpedanz: 4 Ω
Gesamtabmessungen 260 x 1097 x 260 mm
(B x H x T):
Gesamtgewicht: 3,8 kg
• Mittel-Lautsprecher
Typ: 1 Weg
Nennimpedanz: 4 Ω
Gesamtabmessungen 300 x 87x 65 mm
(B x H x T):
Gesamtgewicht: 0,6 kg
S-BD707SW
• Subwoofer
Typ: 1-Weg-1-Lautsprecher
Nennimpedanz: 3 Ω
Gesamtabmessungen 130,5 x 420 x 375 mm
(B x H x T):
Gesamtgewicht: 4,4 kg
Lautsprecher BCS-303
S-BD303
• Vordere/Surround-Lautsprecher (Links/Rechts)
Typ: 1 Weg
Nennimpedanz: 4 Ω
Gesamtabmessungen 96 x 96 x 85 mm
(B x H x T):
Gesamtgewicht: 0.4 kg
• Mittel-Lautsprecher
Typ: 1 Weg
Nennimpedanz: 4 Ω
Gesamtabmessungen 300 x 87 x 65 mm
(B x H x T):
Gesamtgewicht: 0,6 kg
• Subwoofer
Typ: 1-Weg-1-Lautsprecher
Nennimpedanz: 3 Ω
Gesamtabmessungen 130,5 x 420 x 375 mm
(B x H x T):
Gesamtgewicht: 4,4 kg
HB985-DB.BDEUPPK_GER.indd 74HB985-DB.BDEUPPK_GER.indd 74 2010-05-14  2:06:582010-05-14  2:06:58
75
Anhang
7
Anhang
Hinweise zu Open
Source-Software
Die folgenden in diesem Produkt eingesetzten
GPL-Anwendungen und LGPL-Bibliotheken
unterliegen den folgenden GPL2.0-/LGPL2.1-
Lizenzvereinbarungen:
GPL-ANWENDUNGEN: Linux kernel 2.6, bash,
busybox, cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs,
mtd-utils, net-tools, procps, samba-3.0.25b, sysutils,
tcpdump, tftpd, tinylogin, unzip, utelnetd
LGPL-BIBLIOTHEKEN: uClibc, DirectFB, blow sh,
cairo,  mpeg, iconv, libusb, mpg123
gSOAP Public License 1.3-BIBLIOTHEK: gsoap
Eine Kopie des entsprechenden Quellcodes
kann versandkostenp ichtig angefordert werden
Bitte richten Sie Ihre Anfrage an den Pioneer
Kundendienst.
Eine Kopie der GPL- und LGPL-Lizenzen  nden Sie
unter http://www.gnu.org/licenses/old-licenses/
gpl-2.0.html und http://www.gnu.org/licenses/old-
licenses/lgpl-2.1.html .
Eine Kopie der gSOAP Public License  nden Sie unter
http://www.cs.fsu.edu/~engelen/license.html.
Diese Software basiert teilweise auf der Arbeit der
Independent JPEG Group Copyright © 1991-1998,
Thomas G. Lane.
Dieses Produkt beinhaltet
boost C++: Copyright © Beman Dawes 1999-2003
c-ares: Copyright © 1998 Massachusetts Institute
of Technology
curl: Copyright © 1996 - 2008, Daniel Stenberg
expat: Copyright © 2006 expat maintainers
freetype: Copyright © 2003 The FreeType Project
(www.freetype.org).
jpeg: Diese Software basiert teilweise auf der
Arbeit der Independent JPEG Group Copyright ©
1991-1998, Thomas G. Lane.
mng: Copyright © 2000-2007 Gerard Juyn, Glenn
Randers-Pehrson
ntp: Copyright © David L. Mills 1992-2006
• OpenSSL:
Kryptographische Software programmiert von
Eric Young (eay@cryptsoft.com).
Software programmiert von Tim Hudson
(tjh@cryptsoft.com).
Software entwickelt von OpenSSL Project für
den Einsatz im OpenSSL Toolkit.
(http://www.openssl.org)
png: Copyright © 2004 Glenn Randers-Pehrson
portmap: Copyright © 1990 The Regents of the
University of California
ptmalloc: Copyright © 2001-2006 Wolfram Gloger
UnitTest++: Copyright © 2006 Noel Llopis und
Charles Nicholson
UPnP SDK: Copyright © 2000-2003 Intel
Corporation
• strace :
Copyright © 1991, 1992 Paul Kranenburg
copyright © 1993 Branko Lankester
copyright © 1993 Ulrich Pegelow
copyright © 1995, 1996 Michael Elizabeth Chastain
copyright © 1993, 1994, 1995, 1996 Rick Sladkey
copyright © 1999,2000 Wichert Akkerman
xml2 : copyright © 1998-2003 Daniel Veillard
XML-RPC für C/C++:
Copyright © 2001 First Peer, Inc. Alle Rechte
vorbehalten.
Copyright © 2001 Eric Kidd. Alle Rechte
vorbehalten.
zlib: Copyright © 1995-2002 Jean-loup Gailly und
Mark Adler.
Alle Rechte vorbehalten
Hiermit wird kostenfrei allen Nutzern, die eine
Kopie dieser Software und die zugehörigen
Dokumentationsdateien (die “Software”) erhalten, die
Erlaubnis erteilt, die Software ohne Einschränkungen
zu verwenden. Dies umfasst die uneingeschränkte
Genehmigung zum Verwenden, Kopieren, Ändern,
Zusammenführen, Verö entlichen, Verteilen,
Unterlizenzieren und/oder Verkaufen von Kopien
der Software. Diese Rechte dürfen außerdem auf die
Personen übertragen werden, an die die Software
weitergegeben wird, wenn folgende Bedingungen
eingehalten werden:
DIE SOFTWARE WIRD OHNE MÄNGELGEWÄHR
GELIEFERT, OHNE GARANTIEN JEDWEDER
ART, WEDER AUSDRÜCKLICH NOCH IMPLIZIT,
EINSCHLIESSLICH DER, ABER NICHT BESCHRÄNKT
AUF DIE GARANTIEN DER MARKTGÄNGIGKEIT, DER
EIGNUNG FÜR EINEN BESTIMMTEN ZWECK UND
DER NICHTÜBERTRETUNG. IN KEINEM FALL SIND
DIE AUTOREN ODER DIE URHEBERRECHTSINHABER
HAFTBAR FÜR SCHÄDEN ODER SONSTIGE
ANSPRÜCHE, DIE AUS DEM VERTRAG, AUS DESSEN
VERLETZUNG ODER SONST WIE ENTSTEHEN, SEI ES
UNABHÄNGIG VON ODER IN VERBINDUNG MIT DER
SOFTWARE ODER DURCH DIE VERWENDUNG DER
SOFTWARE ODER ANDEREN HANDLUNGEN MIT DER
SOFTWARE.
HB985-DB.BDEUPPK_GER.indd 75HB985-DB.BDEUPPK_GER.indd 75 2010-05-14  2:06:582010-05-14  2:06:58
2 Informazioni sulla sicurezza
Informazioni sulla sicurezza
1
AVVERTENZA
RISCHIO DI SCOSSE ELETTRICHE
NON APRIRE
AVVERTENZA: PER RIDURRE IL RISCHIO DI SCOSSE
ELETTRICHE, NON RIMUOVERE IL COPERCHIO (O
LA PARTE POSTERIORE). L’UNITÀ NON CONTIENE
PARTI RIPARABILI DALL’UTENTE. SE OCCORRE UN
INTERVENTO IN ASSISTENZA, RIVOLGERSI A UN
TECNICO QUALIFICATO.
Questo simbolo di un fulmine
all’interno di un triangolo avverte
l’utente della presenza di tensione
pericolosa non isolata all’interno
dell’unità che può provocare
scosse elettriche.
Il punto esclamativo all’interno di
un triangolo avverte l’utente della
presenza di istruzioni operative e
di manutenzione particolarmente
importanti contenute
nella documentazione di
accompagnamento del prodotto.
Precauzioni ed avvertimenti
Avvertenze: PER EVITARE IL RISCHIO DI INCENDI
O SCOSSE ELETTRICHE, TENERE IL PRODOTTO
LONTANO DALLA PIOGGIA E DALL’UMIDITÀ.
Avvertenze: non installare questo apparecchio in
spazi ristretti quali sca ali o unità simili.
AVVERTENZA: Non ostruire le aperture di
ventilazione. Installare secondo le istruzioni del
fabbricante.
Le feritoie e le aperture sono previste per la
ventilazione e per garantire il corretto funzionamento
del prodotto, proteggendolo dal surriscaldamento.
Non ostruire le aperture collocando il prodotto
su divani, letto, tappeti o altre super ci simili. Non
collocare il prodotto incassato in mobili come
librerie o sca ali, a meno che non sia prevista una
ventilazione su ciente e siano state seguite le
istruzioni del fabbricante.
AVVERTENZA: Questo è un prodotto laser di
classe 1 in base alla classi cazione Sicurezza dei
prodotti laser IEC 60825-1:2007. Per essere sicuri di
utilizzare il prodotto in modo appropriato, leggere
con particolare attenzione questo manuale d’uso e
conservarlo come riferimento per ogni eventuale
futuro intervento di manutenzione; per questi
interventi, rivolgersi a centri di assistenza autorizzati.
L’utilizzo di controlli, regolazioni o procedure diverse
da quelle speci cate di seguito può dare luogo a una
pericolosa esposizione a radiazioni.
Per evitare l’esposizione diretta al fascio laser, non
aprire il contenitore. Quando il contenitore è aperto,
la radiazione laser è visibile. NON FISSARE CON LO
SGUARDO IL FASCIO LASER.
1
Informazioni sulla sicurezza
HB985-DB.BDEUPPK_ITA.indd 2HB985-DB.BDEUPPK_ITA.indd 2 2010-05-14  2:29:532010-05-14  2:29:53
Informazioni sulla sicurezza
3Informazioni sulla sicurezza
1
AVVERTENZA relativa al cavo di alimentazione
Per molti elettrodomestici è consigliabile utilizzare
un circuito dedicato.
Ciò signi ca, un circuito di alimentazione speci co
per un solo apparecchio che non abbia altre prese
in derivazione. A tal  ne, veri care le speci che di
questo Manuale dell’utente. Non sovraccaricare
le prese a muro. Prese sovraccariche, allentate o
danneggiate, prolunghe, cavi s lacciati o isolamenti
spaccati o deteriorati sono pericolosi. In ognuno
dei suddetti casi possono veri carsi incendi o
scosse elettriche. Esaminare periodicamente il cavo
dell’apparecchio e se si notano danneggiamenti
scollegarlo, interrompere l’uso dell’apparecchio
e far sostituire il cavo con uno identico da un
tecnico dell’assistenza quali cato. Evitare che il
cavo sia attorcigliato, piegato o calpestato. Prestare
particolare attenzione alle spine, alle prese a parete
e ai punti in cui il cavo esce dall’unità. Per scollegare
l’alimentazione di rete, staccare il cavo. Durante
l’installazione del prodotto, assicurarsi che la spina sia
facilmente accessibile.
PIONEER dichiara che questo/
i prodotto/i è/sono conforme/i ai
requisiti essenziali e altre indicazioni
della Direttiva 2004/108/CE, 2006/95/
CE e 2009/125/CE.
Avvertenze: Per evitare il pericolo di incendi, non
avvicinare alcuna sorgente di  amma aperta (come
una candela accesa) all’apparecchiatura.
Questo dispositivo è dotato di batteria portatile o
accumulatore.
Modo sicuro per rimuovere la batteria o la
batteria dall’apparecchiatura: Rimuovere la
batteria vecchia o accomulatore seguendo i passi
inversi a quelli seguiti per l’assemblaggio.
Per impedire la contaminazione dell’ambiente
e creare possibili pericoli alla salute dell’uomo o
animali, la vecchia batteria deve essere smaltita
inserendola nel contenitore adeguato nei punti
di raccolta predisposti. Non smaltire le batterie o
accumulatori insieme ai ri uti domestici.
Si raccomanda di utilizzare i sistemi locali di raccolta
di batterie e accumulatori. Non esporre la batteria a
temperature eccessive, ad esempio non esporla al
sole, non gettarla sul fuoco, ecc.
AVVERTENZA: non esporre l’apparecchio all’acqua
(sgocciola-mento o spruzzi) e non collocare su di
esso oggetti riempiti di liquidi, quali ad esempio vasi.
HB985-DB.BDEUPPK_ITA.indd 3HB985-DB.BDEUPPK_ITA.indd 3 2010-05-14  2:29:562010-05-14  2:29:56
4 Informazioni sulla sicurezza
Informazioni sulla sicurezza
1
Informazioni per gli utilizzatori  nali sulla
raccolta e lo smaltimento di vecchi dispositivi e
batterie esauste
Questi simboli sui prodotti, le confezioni e/o i
documenti allegati indicano che i prodotti elettrici
ed elettronici e le batterie non devono essere gettati
insieme alla spazzatura normale.
Per il trattamento appropriato, il recupero ed il riciclo
di vecchi prodotti e di batterie usate, recarsi ai punti
di raccolta in base a quanto disposto dalle norme
locali.
E ettuando lo smaltimento degli apparecchi e
delle batterie in modo corretto, si contribuisce alla
salvaguardia di risorse preziose e s’impediscono gli
e etti potenziali negativi sulla salute dell’uomo e
dell’ambiente che potrebbero altrimenti veri carsi
da una gestione inadeguata della spazzatura.
Per maggiori informazioni dettagliate sullo
smaltimento e sul riciclaggio del vecchio dispositivo
e delle batterie, contattare l’ente locale, il servizio
di nettezza urbana o il punto vendita dove è stato
acquistato il prodotto.
Questi simboli sono validi soltanto nell’Unione
Europea.
Per i paesi extra-UE:
Per gettare questi prodotti, contattare l’ente locale
o il rivenditore e chiedere informazioni sul metodo
corretto di smaltimento.
Questo prodotto è conforme al DM 28/8/1995,
Nº548, ottemperando alle prescrizioni di cui al DM
25/6/1985 (par.3, all. A) e DM 27/8/1987 (All. I).
Note sul Copyright
Poiché l’AACS (Advanced Access Content System)
è approvato come sistema di protezione del
contenuto per il formato BD, analogamente
all’uso del CSS (Content Scramble System) per
il formato DVD, sono presenti alcune limitazioni
su riproduzione, uscita segnale analogico, ecc.,
dei contenuti protetti AACS. Il funzionamento di
questo prodotto e le restrizioni su questo prodotto
possono variare dipendendo dal momento del
vostro acquisto poiché tali restrizioni possono
essere adottate e/o modi cate da AACS dopo la
produzione di questo prodotto.
Inoltre, BD-ROM Mark e BD+ sono utilizzati
ulteriormente come sistema di protezione dei
contenuti per il formato BD, il quale impone
alcune restrizioni incluse restrizioni di riproduzione
di contenuti protetti BD-ROM Mark e/o BD+. Per
informazioni aggiuntive su AACS, contrassegno
BD-ROM, BD+ o su questo prodotto, rivolgersi a
un centro assistenza clienti autorizzato.
Molti dischi BD-ROM/DVD sono codi cati
con protezione dalla copia. A causa di queste
restrizioni, è necessario connettere il lettore
direttamente alla TV anziché il VCR. La connessione
tramite VCR ha come risultato un’immagine
distorta quando questa proviene da dischi protetti
da copia.
Questo prodotto contiene tecnologia di
protezione del copyright protetto da brevetti
USA e da altri diritti di proprietà intellettuale. L’uso
di tale tecnologia di protezione del copyright
deve essere autorizzato da Rovi ed è previsto
solo per uso domestico e altri impieghi limitati di
visualizzazione se non diversamente autorizzato
da Rovi. La decodi ca e il disassemblaggio sono
vietati.
In base alle leggi sul copyright degli U.S.A. e di
altri paesi, registrazione, uso, visualizzazione,
distribuzione o revisione non autorizzati di
programmi televisivi, nastri, dischi BD-ROM, DVD,
CD e altri materiali possono essere soggetti a
responsabilità civile e/o penale.
Symbol examples
for batteries
Pb
Esempio di simboli
per le batterie
HB985-DB.BDEUPPK_ITA.indd 4HB985-DB.BDEUPPK_ITA.indd 4 2010-05-14  2:29:562010-05-14  2:29:56
Informazioni sulla sicurezza
5Informazioni sulla sicurezza
1
Avviso importante per il sistema colore TV
Il sistema colore di questo lettore cambia sulla base
del sistema del disco correntemente in riproduzione.
Per esempio, quando il lettore riproduce un disco
registrato con il sistema colore NTSC, l’uscita
dell’immagine sarà con segnale NTSC.
Solo un apparecchio TV multi sistema colore è in
grado di ricevere tutti i segnali in uscita dal lettore.
Se si dispone di una TV con sistema colore PAL,
quando si usano dischi registrati in NTSC si
vedranno solo delle immagini distorte.
Un apparecchio TV a sistema multiplo colore
cambia automaticamente il sistema colore
sulla base dei segnali in ingresso. Nel caso
in cui il sistema colore non venga cambiato
automaticamente, spegnere l’apparecchio e
riaccendere per vedere le immagini normalmente
sullo schermo.
Anche se i dischi vengono visualizzai
correttamente sull’apparecchio TV, è possibile
che non vengano registrati correttamente sul
registratore.
HB985-DB.BDEUPPK_ITA.indd 5HB985-DB.BDEUPPK_ITA.indd 5 2010-05-14  2:29:562010-05-14  2:29:56
6
Sornmario
1
Informazioni sulla sicurezza
2 Precauzioni ed avvertimenti
2
Preparazione
8 Introduzione
8 Informazioni sul simbolo
8 Simboli utilizzati nel manuale
9 Accessori forniti
10 Dischi riproducibili
11 Compatibilità dei  le
12 Codice regionale
12 AVCHD (Advanced Video
Codec High De nition)
12 Requisiti del sistema
12 Note di compatibilità
13 Telecomando
14 Pannello frontale
15 Pannello posteriore
3
Installazione
16 Assemblare gli altoparlanti
16 Montaggio degli altoparlanti
BCS-707
18 Montaggio degli altoparlanti
BCS-303
19 Installazione a parete
dell’altoparlante centrale
19 Note aggiuntive sugli altoparlanti
20 Posizionamento del sistema
21 Connessioni al TV
21 Connessione HDMI
22 Connessione Component
Video
23 Connessione video
23 Impostazione della
risoluzione
24 Collegamento antenna
24 Connessione con il dispositivo
esterno
24 Connessione AUX
25 PORTA Connessione IN
25 Connessione OPTICAL IN 1/2
26 Collegamento Bluetooth®
28 Connessione alla rete domestica
29 Impostazione rete
31 Collegamento dispositivo USB
32 Settaggi
32 Regolare le impostazioni di
con gurazione
33 Menu [DISPLAY]
34 Menu [LINGUA]
35 Menu [AUDIO]
36 Menu [BLOCCATO]
37 Menu [RETE]
37 Menu [ALTRO]
39 E etto audio
HB985-DB.BDEUPPK_ITA.indd 6HB985-DB.BDEUPPK_ITA.indd 6 2010-05-14  2:29:572010-05-14  2:29:57
7
1
2
3
4
5
6
7
8
4
Uso
40 Riproduzione generale
42 Riproduzione avanzata
44 Visualizzazione su schermo
48 Gustare BD-LIVE
49 Riproduzione di un  le video e disco
VR
51 Visualizzazione di fotogra e
53 Ascolto dei brani musicali
56 Riproduzione del iPod
58 Funzionamento della radio
59 Riproduzione di contenuto sulla rete
domestica
5
Manutenzione
63 Note sui dischi
63 Maneggiamento dell’unità
6
Risoluzione dei problemi
64 Generale
65 Immagine
65 Suono
66 Network
7
Appendice
67 Controllo del televisore mediante il
telecomando
68 Indicativo località
69 Elenco codici lingua
70 Risoluzione video di uscita
71 Marchi commerciali e licenze
73 Speci che tecniche
75 Avviso per il software Open source
HB985-DB.BDEUPPK_ITA.indd 7HB985-DB.BDEUPPK_ITA.indd 7 2010-05-14  2:29:572010-05-14  2:29:57
8 Preparazione
Preparazione
2
2
Preparazione
Introduzione
Informazioni sul simbolo
Durante la riproduzione, sullo schermo della
vostra televisione può apparire , questo
segno indica che la funzione descritta nel
manuale dell’utente non è disponibile su quel
supporto speci co.
Simboli utilizzati nel manuale
NOTA
Indica note speciali e funzionalità operative.
ATTENZIONE
Indica avvertenze di pericolo per la
prevenzione da possibili danni provocati da
uso improprio.
Una sezione, il cui titolo ha uno dei
seguenti simboli, è applicabile solo sul disco
rappresentato dal simbolo.
BD
Disco BD-ROM
DVD
DVD-Video, DVD±R/
RW in modalità Video o
modalità VR e  nalizzata
AVCHD
DVD±R/RW in formato
AVCHD
ACD
CD audio
MOVIE
File video
MUSIC
File musicali
PHOTO
File foto
HB985-DB.BDEUPPK_ITA.indd 8HB985-DB.BDEUPPK_ITA.indd 8 2010-05-14  2:29:572010-05-14  2:29:57
9Preparazione
2
Preparazione
Accessori forniti
Cavo video (1) Telecomando (1)
Batterie (1) Antenna FM (1)
Supporto per iPod
(1)
Accessori della cassa
dell’altoparlante (S-BD707T)
Cavi altoparlante (5)
Viti (12)
Basi per sostegno
altoparlante (4)
Attenuatori
antislittamento
generali (1)
Attenuatori
antislittamento
mediani (1)
Accessori della cassa
dell’altoparlante (S-BD707SW)
Cavi altoparlante (1) Attenuatori
antislittamento
grandi (1)
Accessori della cassa
dell’altoparlante (S-BD303)
Cavi altoparlante (6)
Attenuatori
antislittamento
generali (1)
Attenuatori
antislittamento
grandi (1)
HB985-DB.BDEUPPK_ITA.indd 9HB985-DB.BDEUPPK_ITA.indd 9 2010-05-14  2:29:572010-05-14  2:29:57
10 Preparazione
Preparazione
2
Dischi riproducibili
Blu-ray Disc
- Dischi, contenenti ad esempio
lm, acquistabili o noleggiabili
- Dischi BD-R/RE che
contengono  le di  lm, musica
o foto.
DVD-VIDEO
dischi da 8 / 12 cm
Dischi, contenenti ad esempio
lm, acquistabili o noleggiabili
DVD±R
dischi da 8 / 12 cm
- Solo modalità video e
nalizzata
- Supporta anche dischi dual
layer
- Formato AVCHD  nalizzato
- Dischi DVD±R che contengono
le di  lm, musica o foto.
DVD-RW
dischi da 8 / 12 cm
- Modalità VR, modalità Video e
solo  nalizzata
- Formato AVCHD  nalizzato
- Dischi DVD-RW che
contengono  le di  lm, musica
o foto.
DVD+RW
8 / 12 cm disc
- Solo modalità video e
nalizzata
- Formato AVCHD
- Formato AVCHD  nalizzato
- Dischi DVD+RW che
contengono  le di  lm, musica
o foto.
Audio CD
dischi da 8 / 12 cm
CD-R/RW
dischi da 8 / 12 cm
- Dischi CD-R/RW contenenti
titoli audio,  le video, musica o
foto.
NOTA
In base alle condizioni dell’apparecchiatura
di registrazione o dello stesso disco CD-R/
RW (o DVD±R/RW), non è possibile riprodurre
nell’unità alcuni dischi CD-R/RW (o DVD±R/RW).
In base al software di registrazione e
nalizzazione, potrebbe non essere possibile
riprodurre alcuni dischi registrati (CD-R/RW,
DVD±R/RW, BD-R/RE).
I dischi BD-R/RE, DVD±R/RW e CD-R/RW
registrati mediante PC o masterizzatore DVD o
CD potrebbero non venire riprodotti se il disco
è danneggiato o sporco, oppure se è presente
sporcizia o condensa sulla lente del lettore.
Se il disco è stato registrato tramite PC, anche
mediante un formato compatibile, in alcuni casi
la riproduzione potrebbe risultare impossibile a
causa delle impostazioni del software utilizzato
per creare il disco. Per maggiori informazioni,
consultare il produttore del software.
Per garantire un’ottima qualità della
riproduzione, questo lettore richiede la
conformità di dischi e registrazioni con
determinati standard tecnici.
I DVD preregistrtrati sono conformi con questi
standard. Esistono diversi tipi di formati di dischi
registrabili (compresi CD-R contenenti  le MP3 o
WMA) che richiedono la presenza di determinate
condizioni per assicurare una riproduzione
compatibile.
I clienti devono tenere presente che per scaricare
le MP3/WMA e musicali da Internet è richiesta
autorizzazione. La nostra azienda non ha alcun
diritto per concedere tale autorizzazione.
L’autorizzazione deve essere sempre ottenuta
dal proprietario del copyright.
HB985-DB.BDEUPPK_ITA.indd 10HB985-DB.BDEUPPK_ITA.indd 10 2010-05-14  2:29:582010-05-14  2:29:58
11Preparazione
2
Preparazione
Compatibilità dei  le
Complessivo
Estensioni  le disponibili:
.jpg”, “.jpeg”, “.png”, “.avi”, “.divx, “.mpg”, “.mpeg”,
.mkv, “.mp4”, “.mp3”, .wma”, “.wav
Le estensioni di  le disponibili variano in
funzione dei server DLNA.
Alcuni  le .wav non sono supportati da
questo lettore.
Il nome del  le è limitato a 180 caratteri.
Dipendendo dalle dimensioni e numero di
le, possono essere necessari diversi minuti
per la lettura del contenuto dei supporti.
Massimo numero di  le/cartelle:
Meno di 2 000 (numero totale di  le e cartelle)
Formato CD-R/RW, DVD±R/RW, BD-R/RE:
ISO 9 660+JOLIET, UDF e UDF Bridge
MOVIE
Risoluzione disponibile:
1 920 x 1 080 (OxV) pixel
Sottotitolo riproducibile: SubRip (.srt /
.txt), SAMI (.smi), SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub (.sub), SubViewer
1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer
(.txt), DVD Subtitle System (.txt)
VobSub (.sub) non è disponibile nella
funzione [Coll. Home].
Formati codec riproducibili: “DIVX3.xx”,
“DIVX4.xx, “DIVX5.xx, “XVID”, “DIVX6.xx (solo
riproduzione standard), H.264/MPEG-4 AVC,
MPEG1 SS, MPEG2 PS, MPEG2 TS
Formati audio riproducibili: “Dolby Digital”,
“DTS, “MP3”, “WMA, “AAC, “AC3”
Non tutti i formati audio WMA e AAC sono
compatibili con questa unità.
Frequenza di campionamento:
entro 32 kHz  no a 48 kHz (WMA),
entro 16 kHz  no a 48 kHz (MP3)
Velocità trasmissione:
entro 20 kbps  no a 320 kbps (WMA),
entro 32 kbps  no a 320 kbps (MP3)
NOTA
I  le dei  lm HD contenuti su CD o USB 1,0/1,1
potrebbero non venire correttamente riprodotti.
Si consiglia BD, DVD o USB 2.0 per riprodurre  le
di  lmati HD.
Questo lettore supporta H.264/MPEG-4 AVC
pro lo Main, High al Level 4,1. Nel caso di  le
con livello superiore, sullo schermo apparirà un
messaggio di avvertenza.
Questo lettore non supporta i  le registrati
con GMC
*
1
o Qpel
*
2
. Queste sono tecniche di
registrazione video in standard MPEG4, come
quelle di DivX o XVID.
*1 GMC – Compensazione movimento globale
*2 Qpel – Quarter pixel
MUSICA
Frequenza di campionamento:
entro 8 kHz  no a 48 KHz (WMA),
entro 11 kHz  no a 48 kHz (MP3)
Velocità trasmissione:
entro 8 kbps  no a 320 kbps (WMA, MP3),
NOTA
Questa unità non supporta i  le MP3 con ID3
Tag embedded.
Il tempo di riproduzione totale indicato sullo
schermo può non essere corretto per  le VBR.
PHOTO
Dimensioni consigliate:
Meno di 4,000 x 3,000 x 24 bit/pixel
Meno di 3,000 x 3,000 x 32 bit/pixel
Meno di 4 MByte/ le
Le immagini foto a compressione
progressiva e losless non sono supportate.
HB985-DB.BDEUPPK_ITA.indd 11HB985-DB.BDEUPPK_ITA.indd 11 2010-05-14  2:29:582010-05-14  2:29:58
12 Preparazione
Preparazione
2
Codice regionale
Questa unità dispone di un codice regionale
stampato sul retro. Questa unità è in grado di
riprodurre solo dischi BD-ROM o DVD con la
stessa indicazione presente sul retro o con
l’etichetta “ALL.
AVCHD (Advanced Video Codec
High De nition)
Questo lettore può riprodurre dischi
in formato AVCHD. Tali dischi vengono
normalmente registrati e utilizzati nelle
videocamere.
Il formato AVCHD è un formato digitale ad
alta de nizione per videocamere.
Il formato MPEG-4 AVC/H.264 è in grado
di comprimere le immagini con e cienza
maggiore rispetto al formato convenzionale
di compressione immagini.
Alcuni dischi AVCHD usano il formato
“x.v.Colour.
Questo lettore è in grado di riprodurre
dischi AVCHD tramite il formato “x.v.Colour.
Alcuni dischi in formato AVCHD potrebbero
non venire riprodotti, in base alla condizione
di registrazione.
I dischi in formato AVCHD devono essere
nalizzati.
• “x.v.Colour o re una gamma di colori più
ampia rispetto ai normali dischi DVD delle
videocamere.
Requisiti del sistema
Per la riproduzione video ad alta de nizione:
Un display ad alta de nizione dotato di jack
di ingresso COMPONENT o HDMI.
Disco BD-ROM con contenuto ad alta
de nizione.
Per alcuni contenuti (come de nito
dagli autori) è richiesto un ingresso DVI
compatibile HDMI o HDCP sulla propria
periferica di visualizzazione.
Per la conversione di DVD di de nizione
standard, è necessario avere sul proprio
display un ingresso DVI compatibile HDMI o
HDCP per la copia di contenuto protetto.
Note di compatibilità
Poiché BD-ROM è un nuovo formato,
sono possibili alcuni problemi ai dischi, di
connessione digitale e di compatibilità. Se si
rilevano problemi di compatibilità, rivolgersi
a un centro assistenza autorizzato.
La visione di contenuto ad alta de nizione
e la conversione di contenuti DVD standard
può richiedere un ingresso compatibile
HDMI o un ingresso DVI-HDMI sul
dispositivo usato per la visualizzazione.
Alcuni dischi BD-ROM e DVD possono
limitare l’uso di alcuni comandi o funzioni.
Si può utilizzare un dispositivo USB utilizzato
per memorizzare alcune informazioni
relative al disco, incluso contenuto
scaricato on-line. Il disco usato controllerà
la durata per la quale l’informazione viene
mantenuta.
HB985-DB.BDEUPPK_ITA.indd 12HB985-DB.BDEUPPK_ITA.indd 12 2010-05-14  2:29:582010-05-14  2:29:58
13Preparazione
2
Preparazione
Telecomando
1
2
3
• • • • • • • • •
a
• • • • • • • • •
1
(STANDBY/ON): Accende e
spegne il lettore.
Z
OPEN/CLOSE: Apre/chiude il
vassoio del disco.
INPUT/TUNER: Modi ca la
modalità di ingresso.
BT AUDIO: Si modi ca
direttamente il modo ingresso in
modo BT AUDIO.
OPTICAL: Modi ca direttamente la
modalità di immissione su ottico.
DISPLAY: Visualizza o chiude il
display su schermo (OSD).
HOME MENU: Visualizza il
[Menu prin.] o esce da esso.
MENU: Accede al menu su un
disco.
Pulsanti di direzione: Consentono
di selezionare unopzione nel
menu.
ENTER: Conferma la selezione
di menu.
TUNE (+/-): sintonizza la stazione
radiofonica desiderata.
PRESET: seleziona i programmi
radiofonici prede niti.
• • • • • • • • •
b
• • • • • • • • •
O
RETURN: Esce dal menu o
riprende la riproduzione.
POPUP/ TOP MENU: Visualizza
il menu del titolo DVD o il menu
a comparsa del BD-ROM, se
disponibile.
x
STOP: Interrompe la
riproduzione.
B
PLAY:
Avvia la riproduzione.
X
PAUSE/STEP: Mette la
riproduzione in pausa.
.
/
>
SKIP: Passa al  le/
brano/capitolo successivo o
precedente.
m
/
M
SCAN: Ricerca avanti o
indietro.
SPK LEVEL: Imposta il livello audio
dell’altoparlante desiderato.
z
USB REC: Registra un CD Audio.
MUTE: Silenzia l’unità.
SOUND: Seleziona una modalità di
e etto audio.
VOL +/- : Regola il volume
dell’altoparlante.
• • • • • • • • •
c
• • • • • • • • •
Tasti numerici 0-9: Seleziona le
opzioni numerate in un menu.
MARKER: Segna qualsiasi punto
durante la riproduzione.
SEARCH: Visualizza o esce dal
menu di ricerca.
REPEAT: Ripete una sezione
desiderata.
CLEAR: Rimuove il contrassegno
nel menu di ricerca o un numero
durante l’impostazione della
password.
DIMMER: attenua la luce dell’unità.
ZOOM: Si accede al menu di zoom.
Pulsanti colorati (A, B, C, D):
Usare per navigare i menu.
- Pulsante A (RDS): Radio Data
System.
- Pulsante
B (PTY): Visualizza la
tipologia di programma dell’RDS.
- Pulsante
C (PTY SEARCH): Cerca
la tipologia di programma.
- Pulsante
D: Seleziona mono/
stereo nella modalità FM.
Pulsanti di controllo TV: Vedere
pagina 67.
SLEEP: Imposta un dato periodo di
tempo trascorso il quale l’unità si
spegne.
Installazione della
batteria
Togliere il coperchio
sulla parte posteriore del
telecomando, quindi inserire
una batteria R03 (tipo
AAA) con la polarità e
corretta.
HB985-DB.BDEUPPK_ITA.indd 13HB985-DB.BDEUPPK_ITA.indd 13 2010-05-14  2:29:582010-05-14  2:29:58
14 Preparazione
Preparazione
2
Pannello frontale
a
Vassoio del disco
b
Pulsanti di funzionamento
Pulsante
1
STANDBY/ON
Z
(OPEN/CLOSE)
FUNZIONE
Modi ca la sorgente di ingresso o funzione.
B
/
X
(PLAY / PAUSE)
x
(STOP)
.
/
>
(SKIP)
- TUNE + (Sintonizzazione della radio)
c
Sensore del telecomando
d
Finestra Display
e
PORTABLE IN
f
Porta USB
g
Controllo volume
1
2
3 4 5 6 7
HB985-DB.BDEUPPK_ITA.indd 14HB985-DB.BDEUPPK_ITA.indd 14 2010-05-14  2:29:582010-05-14  2:29:58
15Preparazione
2
Preparazione
a
Cavo di alimentazione CA
Inserire nella presa di corrente.
b
Connettori altoparlanti
c
Ventola di raffreddamento
d
Connettore dell’antenna
e
VIDEO OUT
f
AUX (L/R) INPUT
g
COMPONENT VIDEO (Y P
B
P
R
)
OUTPUT (SCANSIONE PROGRESSIVA)
h
OPTICAL 1(TV) / 2
i
iPod (24 pin)
Connettere al supporto per l’iPod fornito.
j
HDMI OUT (tipo A, Versione 1.3)
Connettere a una TV con ingressi HDMI.
k
Porta LAN
Pannello posteriore
1 2 3 4 5
6 7 8 9 10 11
HB985-DB.BDEUPPK_ITA.indd 15HB985-DB.BDEUPPK_ITA.indd 15 2010-05-14  2:29:592010-05-14  2:29:59
16 Installazione
Installazione
3
Assemblare gli
altoparlanti
Montaggio degli altoparlanti
BCS-707
Preparazione degli altoparlanti
1. Applicare i piedini antiscivolo alla base
di ciascun altoparlante, del subwoofer e
dell’altoparlante centrale.
Per basi dell’altoparlante:
Utilizzare l’adesivo in dotazione per
applicare i quattro piedini medi alla
base (parte inferiore) di ciascuna base
dell’altoparlante.
middle non-skid pads
piedini antiscivolo medi
Per subwoofer:
Utilizzare l’adesivo in dotazione per
applicare i quattro piedini medi alla base.
large non-skid pads
piedini antiscivolo grandi
Per l’altoparlante centrale:
Utilizzare l’adesivo in dotazione per
applicare i quattro piedini piccoli alla base
dell’altoparlante centrale.
small non-skid pads
piedini antiscivolo
piccoli
2. Installare le basi dell’altoparlante sulle aste
utilizzando le viti in dotazione.
Dopo aver allineato l’asta e la base, stringere
le viti piccolo nei punti illustrati di seguito.
Si noti che l’altoparlante deve essere rivolto
nella direzione della base del triangolo
isoscele.
Rear
Front
Parte posteriore
Parte anteriore
3
Installazione
HB985-DB.BDEUPPK_ITA.indd 16HB985-DB.BDEUPPK_ITA.indd 16 2010-05-14  2:29:592010-05-14  2:29:59
17Installazione
3
Installazione
3. Collegare i cavi al lettore.
Collegare il cavo bianco con linea grigia
nel lato (+) e l’altro cavo nel lato (–). Per
collegare il cavo al lettore premere ciascuna
linguetta di plastic per aprire il connettore
di collegamento. Inserire il cavo e rilasciare
la linguetta.
Colore (+)
Nero (-)
ATTENZIONE
Non collegare casse di tipo diverso da quello
fornito con il sistema.
Non collegare gli altoparlanti in dotazione
ad ampli catori diversi da quelli forniti con
il sistema. Il collegamento ad ampli catori
di altro tipo può provocare un problema di
funzionamento o un incendio.
Fissaggio degli altoparlanti anteriore
e surround
Fissare gli altoparlanti anteriore e surround
utilizzando il morsetto in plastica in dotazione.
Avvitare i due ganci di supporto nella parete
dietro all’altoparlante. Passare un cavo spesso
attorno i ganci e attraverso il morsetto in
plastic in modo da stabilizzare l’altoparlante
(veri care che sia in grado di supportare il peso
dell’altoparlante). Dopo l’installazione veri care
che l’altoparlante sia  ssato correttamente.
thick cord
Plastic catch
Cavo
adeguatamente
spesso
Morsetto in plastica
ATTENZIONE
Il morsetto in plastica non è un accessorio
d’installazione e non si deve appendere
l’altoparlante alla parete utilizzando
esclusivamente il morsetto. Per stabilizzare gli
altoparlanti utilizzare sempre un cavo.
Pioneer non è responsabile di danni o perdite
provocate dal montaggio, dall’installazione
inadeguata, dalla forza insu ciente dei materiali
d’installazione, dall’uso improprio o dai disastri
naturali.
Per posizionare l’unità, veri care che sia ben
ssata ed evitare punti in cui è facile che possa
cadere e provocare ferimenti in caso di disastri
naturali (terremoto).
HB985-DB.BDEUPPK_ITA.indd 17HB985-DB.BDEUPPK_ITA.indd 17 2010-05-14  2:29:592010-05-14  2:29:59
18 Installazione
Installazione
3
Montaggio degli altoparlanti
BCS-303
Preparazione degli altoparlanti
1. Applicare i piedini antiscivolo alla base di
ogni altoparlante.
Per altoparlanti anteriore e surround:
Utilizzare l’adesivo in dotazione per
applicare i quattro piedini piccoli alla
base (parte inferiore) di ciascuna base
dell’altoparlante.
samll non-skid pads
piedini antiscivolo piccoli
Per subwoofer:
Utilizzare l’adesivo in dotazione per
applicare i quattro piedini medi alla base.
large non-skid pads
piedini antiscivolo grandi
Per l’altoparlante centrale:
Utilizzare l’adesivo in dotazione per
applicare i quattro piedini piccoli alla base
dell’altoparlante centrale.
samll non-skid pads
piedini antiscivolo
piccoli
2. Collegare i cavi al lettore.
Collegare il cavo bianco con linea grigia
nel lato (+) e l’altro cavo nel lato (–). Per
collegare il cavo al lettore premere ciascuna
linguetta di plastica per aprire il connettore
di collegamento. Inserire il cavo e rilasciare
la linguetta.
Colore (+)
Nero (-)
HB985-DB.BDEUPPK_ITA.indd 18HB985-DB.BDEUPPK_ITA.indd 18 2010-05-14  2:30:002010-05-14  2:30:00
19Installazione
3
Installazione
Installazione a parete
dell’altoparlante
centrale
L’altoparlante centrale è dotato di un foro
d’installazione che può essere utilizzato per
montare l’altoparlante alla parete.
Prima dell’installazione
Ricordarsi che il sistema di altoparlanti è
pesante e il peso potrebbe allentare le viti o
il materiale della parete potrebbe non essere
adeguato a sorreggere, provocando la caduta
dell’altoparlante. Veri care che la parete
che s’intende utilizzare sia adeguatamente
resistente per supportare gli altoparlanti.
Non installare su pareti di compensato o
cartongesso.
Le viti d’installazione non sono fornite.
Utilizzare viti indicate per il materiale della
parete e a supportare il perso dell’altoparlante.
ATTENZIONE
Se non si è sicuri della qualità e della forza
della parte, consultare un tecnico per eventuali
consigli.
Pioneer non è responsabile di incidenti o danni
dovuti all’installazione impropria.
5 mm
10 mm
Mounting screw
(not supplied)
Vite per
l’installazione
(non in dotazione)
Note aggiuntive sugli
altoparlanti
Installare gli altoparlanti principali anteriore
destro e sinistro alla stessa distanza dal TV.
Precauzioni:
Veri care che tutto il cavo scoperto
dell’altoparlante sia attorcigliato insieme
e inserito completamente nel connettore
dell’altoparlante. Se i cavi scoperti del di usore
toccano il panello posteriore si potrebbe
veri care un’interruzione di alimentazione
come misura di sicurezza.
Gli altoparlanti anteriore, centrale e surround
in dotazione con il sistema sono schermati
magneticamente. Tuttavia, a seconda del luogo
d’installazione si può veri care una distorsione
del colore se l’altoparlante è installato molto
vicino allo schermo del televisore. In tal caso,
spegnere l’interruttore del televisore (OFF)
e riaccenderlo (ON) dopo 15 - 30 min. Se il
problema persiste posizionare il sistema di
altoparlanti lontano dal televisore.
Il subwoofer non è schermato magneticamente
e non dovrebbe essere posto vicino a un TV
o a un monitor. I supporti di memorizzazione
magnetica ( oppy-disk, nastri o videocassette)
devono essere conservati lontani dal
subwoofer.
Non installare l’altoparlante centrale/surround
e il subwoofer alla parete o al so tto.
Potrebbero cadere provocando ferimenti.
da 5 mm a 7 mm
HB985-DB.BDEUPPK_ITA.indd 19HB985-DB.BDEUPPK_ITA.indd 19 2010-05-14  2:30:002010-05-14  2:30:00
20 Installazione
Installazione
3
Posizionamento del sistema
Lillustrazione seguente mostra un esempio
di posizionamento del sistema. Notare che
le illustrazioni in queste istruzioni possono
essere diverse dall’unità e ettiva per scopo
esplicativo. Per ottenere il miglior audio
surround possibile, tutti gli altoparlanti diversi
dal subwoofer devono essere posizionati alla
stessa distanza dal punto di ascolto (
A
).
A
B
D
E
F
A
A
A
A
A
G
C
A
Altoparlante anteriore sinistro (S)/
B
Altoparlante anteriore destro (D):
Posizionare gli altoparlanti anteriori sui lati del
monitor o schermo allineandoli il più possibile
all’altezza di quest’ultimo.
C
Cassa centrale:
Posizionare l’altoparlante centrale sopra o sotto
al monitor o schermo.
D
Altoparlante surround sinistro (S)/
E
Altoparlante surround destro (D):
Posizionare questi altoparlanti dietro alla posizione
di ascolto rivolti leggermente verso l’interno.
F
Subwoofer:
La posizione del subwoofer non è così
importante poiché i suoni bassi non sono
altamente direzionali. Ma il meglio posizionare
il subwoofer vicino agli altoparlanti anteriori.
Ruotarlo leggermente verso il centro della
stanza per ridurre i ri essi sulle pareti.
G
Unità
ATTENZIONE
Attenzione che i bambini non mettano le
mani o qualsiasi tipo di oggetto nel *condotto
dell’altoparlante.
*Condotto dell’altoparlante: Un ambiente per un
suono basso pieno nella cassa dell’altoparlante
(alloggiamento).
Posizionare l’altoparlante centrale ad una
distanza di sicurezza dai bambini.
In caso contrario, l’altoparlante potrebbe cadere
e provocare lesioni personali e/o danni alla
proprietà.
Gli altoparlanti contengono parti magnetiche
che possono provocare irregolarità di colore
sullo schermo della TV o del PC. Posizionare gli
altoparlanti lontano dal TV o dal PC.
HB985-DB.BDEUPPK_ITA.indd 20HB985-DB.BDEUPPK_ITA.indd 20 2010-05-14  2:30:002010-05-14  2:30:00
21Installazione
3
Installazione
Connessioni al TV
E ettuare uno dei collegamenti che seguono
a seconda delle capacità delle apparecchiature
esistenti.
Connessione HDMI (pagina 21-22)
Connessione Component Video (pagina 22)
Connessione video (pagina 23)
NOTA
Dipendendo dalle apparecchiature che si
desidera connettere, esistono varie modalità di
connessione del lettore. Usare solo una delle
connessioni descritte in questo manuale.
Consultare i manuali della propria TV,
videoregistratore, impianto stereo o altre
apparecchiature al  ne di e ettuare il miglior
collegamento.
Assicurarsi che il lettore sia collegato
direttamente alla TV. Sintonizzare la TV sul canale
di ingresso video corretto.
Non connettere il lettore passando dal VCR.
L’immagine potrebbe venire distorta dal sistema
di protezione della copia.
Connessione HDMI
Se si possiede un televisore o un monitor HDMI
è possibile collegarli a questo lettore mediante
cavo HDMI (tipo A, Versione 1.3). Connettere il
jack HDMI OUT del lettore al jack HDMI IN della
TV o monitor HDMI compatibile.
Connessione HDMI
Player
TV
TV
Lettore
Impostare la sorgente TV su HDMI (consultare
il manuale del
TV).
HB985-DB.BDEUPPK_ITA.indd 21HB985-DB.BDEUPPK_ITA.indd 21 2010-05-14  2:30:002010-05-14  2:30:00
22 Installazione
Installazione
3
NOTA
La modi ca della risoluzione quando la
connessione è già stata stabilita può avere
un cattivo funzionamento come risultato. Per
risolvere il problema, spegnere i lettore e quindi
riaccenderlo.
Se la connessione HDMI con HDCP non è
veri cata, lo schermo TV diviene nero. In questo
caso, controllare la connessione HDMI, oppure
scollegare il cavo HDMI.
Se ci sono disturbi o linee sullo schermo,
controllare il cavo HDMI (la lunghezza è
generalmente limitata a 4,5 m e usare un cavo
HDMI ad alta velocità (versione 1.3).
Se un dispositivo HDMI connesso non accetta
un’uscita audio del lettore, l’audio del dispositivo
HDMI può essere distorto o può non uscire.
Quando si usa la connessione HDMI, è possibile
modi care la risoluzione dell’uscita HDMI.
(Vedere “Impostazione della risoluzione”
a pagina 23.)
Selezionare il tipo di uscita video dal jack HDMI
OUT usando l’opzione [Imp. colore HDMI] sul
menu [Impostaz.] (vedere pagina 34).
Quando si connette un dispositivo HDMI o DVI
compatibile, accertarsi di quanto segue:
- Provare a spegnere il dispositivo HDMI/DVI
e questo lettore. Dopodiché, accendere il
dispositivo HDMI/DVI e lasciarlo per circa 30
secondi, quindi accendere questo lettore.
- Lingresso video del dispositivo connesso sia
impostato correttamente per questa unità.
- Il dispositivo connesso sia compatibile con
ingresso video 720x576p (480p), 1280x720p,
1920x1080i o 1920x1080p.
Non tutti i dispositivi HDMI o DVI HDCP-
compatibili funzionano con questo lettore.
- Su un dispositivo non HDCP è possibile che
l’immagine non venga visualizzata in modo
corretto.
- Questo lettore non avvia la riproduzione e lo
schermo del televisore diviene nero.
Connessione Component Video
Connettere i jack COMPONENT VIDEO OUT sul
lettore ai jack di ingresso corrispondenti sulla
TV tramite i cavi Y Pb Pr. Potete ascoltare l’audio
sull’altoparlante del sistema.
Connessione componente
Player
TV
Green
Blue
Red
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Lettore
Verde
Blu
Rosso
TV
NOTA
Quando si usa la connessione COMPONENT VIDEO
OUT, è possibile modi care la risoluzione dell’uscita
VIDEO. (Vedere “Impostazione della risoluzione” a
pagina 23.)
HB985-DB.BDEUPPK_ITA.indd 22HB985-DB.BDEUPPK_ITA.indd 22 2010-05-14  2:30:012010-05-14  2:30:01
23Installazione
3
Installazione
Connessione video
Collegare il connettore VIDEO OUT del lettore
al connettore video sul TV tramite il cavo video.
Potete ascoltare l’audio sull’altoparlante del
sistema.
Connessione video
TV
Yellow
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Lettore
Giallo
Impostazione della risoluzione
Il lettore consente di impostare diverse
risoluzioni dell’uscita per i jack HDMI OUT e
COMPONENT VIDEO OUT. Si può modi care la
risoluzione usando il menu di con gurazione
[Impostaz.].
1. Premere HOME MENU (
).
2. Usare
I
/
i/U
/
u
per selezionare [Impostaz.]
e premere ENTER (
). Appare il menu di
con gurazione [Impostaz.].
3. Utilizzare
U
/
u
per selezionare l’opzione
[DISPLAY], quindi premere
i
per passare al
secondo livello.
4. Usare
U
/
u
per selezionare l’opzione
[Resolution] e quindi premere ENTER (
)
o
i
per passare al terzo livello.
5. Utilizzare
U
/
u
per selezionare la risoluzione
desiderata, quindi premere ENTER ( ) per
confermare la selezione.
NOTA
Se la TV non accetta la risoluzione impostata sul
lettore è possibile impostare la risoluzione su
576p (480p) come segue:
1. Premere
Z
per aprire il vassoio del disco.
2. Premere
x
per oltre 5 secondi.
Poiché diversi fattori in uenzano la risoluzione
dell’uscita video, vedere “Risoluzione video di
uscita a pagina 70.
HB985-DB.BDEUPPK_ITA.indd 23HB985-DB.BDEUPPK_ITA.indd 23 2010-05-14  2:30:022010-05-14  2:30:02
24 Installazione
Installazione
3
Collegamento
antenna
Per ascoltare la radio connettere l’antenna
fornita in dotazione.
Collegamento antenna
Player
Lettore
NOTA
Una volta connessa l’antenna a  lo FM tenerla nella
posizione più orizzontale possibile. Veri care che
l’antenna a  lo FM sia completamente distesa.
Connessione con il
dispositivo esterno
Connessione AUX
Si può godere l’audio dell’unità tramite i
jack analogici di uscita degli altoparlanti del
sistema.
Connettere i jack di uscita audio analogici del
componente alla porta AUX S/D (INPUT) di
questa unità. E quindi selezionare l’opzione
[AUX] premendo INPUT/TUNER,
I
/
i
e quindi
ENTER (
).
Connessione AUX
Player
To the audio output jacks
of your component
(TV, VCR, etc.)
Red
White
PR
PB
Y
COMPONENT
VIDEO
INPUT
L
AUX
R
VIDEO
Rosso
Bianco
Lettore
Verso i jack di uscita audio
del componente
(TV, VCR, ecc.)
HB985-DB.BDEUPPK_ITA.indd 24HB985-DB.BDEUPPK_ITA.indd 24 2010-05-14  2:30:022010-05-14  2:30:02
25Installazione
3
Installazione
PORTA Connessione IN
Si può godere l’audio del lettore audio portatile
tramite gli altoparlanti del sistema.
Connettere il jack delle cu e (o line out) del
lettore audio portatile alla porta PORT IN di
questa unità.E quindi selezionare l’opzione
[PORTABLE] premendo INPUT/TUNER,
I
/
i
e
quindi ENTER (
).
Connessione PORT IN
twZGSGUUU
Lettore MP3 ecc..
Connessione OPTICAL IN 1/2
Si può godere l’audio del proprio componente
tramite la connessione ottica digitale che
connette gli altoparlanti del sistema.
Connettere il jack ottico di uscita del
componente ai jack OPTICAL IN 1/2 dell’unità.
E quindi selezionare l’opzione [OPTICAL 1/2]
premendo INPUT/TUNER,
I
/
i
e quindi ENTER
(
). Oppure premere OPTICAL per la selezione
diretta.
Connessione ottica
To the digital
optical output jack
of your component
Verso l’uscita jack
ottico digitale del
componente
HB985-DB.BDEUPPK_ITA.indd 25HB985-DB.BDEUPPK_ITA.indd 25 2010-05-14  2:30:032010-05-14  2:30:03
26 Installazione
Installazione
3
Collegamento Bluetooth®
Informazioni sul Bluetooth
Bluetooth® è una tecnologia di comunicazione
wireless per collegamenti a breve raggio.
Lintervallo supportato è entro i 10 metri (se il
collegamento subisce interferenze da parte
di altre onde elettromagnetiche o si collega
il Bluetooth in altre stanze, l’audio potrebbe
interrompersi).
Il collegamento di singoli dispositivi tramite
la tecnologia Bluetooth non comporta alcun
costo.
Un telefono cellulare dotato di tecnologia
wireless Bluetooth può essere adoperato
tramite il Cascade se la connessione è
e ettuata con Bluetooth.
Dispositivi supportati: telefoni cellulari, MP3,
laptop, PDA (queste unità devono supportare
cu e stereofoniche).
Pro li Bluetooth
Per usare la tecnologia wireless Bluetooth,
i dispositivi devono essere in grado di
interpretare alcuni pro li.
Questa unità è compatibile con i seguenti
pro li.
A2DP (Advanced Audio Distribution Pro le)
Ascolto di musica da un dispositivo
Bluetooth
Accoppiare l’unità e il dispositivo Bluetooth
Prima di cominciare la procedura di
abbinamento, accertarsi che sul dispositivo sia
stato abilitato il Bluetooth.
Fare riferimento alla guida utente del
dispositivo. Non è necessario ripetere
l’operazione di accoppiamento una volta
eseguita la prima volta.
1. Selezionare la funzione Bluetooth usando
INPUT/TUNER o BT AUDIO.
Sul display è visualizzato “BT AUDIO” e
quindi “BT READY”.
2. Attivare il dispositivo Bluetooth ed eseguire
l’operazione di accoppiamento.
Quando l’unità cerca un dispositivo
Bluetooth, sul display di quest’ultimo
può essere visualizzato un elenco delle
periferiche disponibili a seconda del tipo
di dispositivo. L’unità è visualizzata come
“PIONEER AUDIO”.
3. Immettere il codice PIN.
Codice PIN: 0000
4. Se l’unità è accoppiata correttamente con
il dispositivo Bluetooth, il LED Bluetooth
dell’unità si illumina ed è visualizzato “BT
SINK”.
NOTA
La procedura di accoppiamento può cambiare in
base al tipo di dispositivo Bluetooth.
5. Ascolto di brani musicali.
Per riprodurre i  le musicali memorizzati
sul proprio dispositivo Bluetooth, fare
riferimento alla relativa guida utente.
NOTA
Se si cambia il funzionamento dell’unità, la
funzione Bluetooth è disconnessa; in questo caso
è necessario ripetere l’accoppiamento.
AVRCP potrebbe non essere disponibile in
questa modalità.
HB985-DB.BDEUPPK_ITA.indd 26HB985-DB.BDEUPPK_ITA.indd 26 2010-05-14  2:30:032010-05-14  2:30:03
27Installazione
3
Installazione
Controllo delle informazioni del dispositivo
Bluetooth collegato
Questa funzione è attivata dopo
l’accoppiamento. Per controllare le informazioni
sul Bluetooth.
Tenere premuto ripetutamente DISPLAY.
Le informazioni sul Bluetooth cambiano come
di seguito.
Indirizzo del dispositivo Bluetooth locale
t
Nome del dispositivo
t
Nessuno
t
...
NOTA
Questa unità non supporta il pro lo Cu e
monofoniche (pro lo vivavoce).
Quando il collegamento subisce interferenze da
parte di altre onde elettromagnetiche, l’audio
potrebbe essere interrotto.
Con questa unità non è possibile controllare il
dispositivo Bluetooth.
L’accoppiamento è limitato a un dispositivo
Bluetooth per unità; non è supportato
l’accoppiamento multiplo.
Sebbene la distanza tra il Bluetooth e l’unità
sia inferiore a 10 m, in presenza di ostacoli ci
potrebbero essere problemi di collegamento.
A seconda del tipo di dispositivo, potrebbe non
essere possibile utilizzare la funzione Bluetooth.
Quando il Bluetooth è collegato, sul display è
visualizzato “BT READY”.
In caso di malfunzionamenti elettrici
provocati da dispositivi che utilizzano le stesse
frequenze, come apparecchiature medicali,
forni a microonde e periferiche LAN wireless, il
collegamento può interrompersi.
La presenza di una persona tra il dispositivo
Bluetooth e il lettore può interrompere
la comunicazione; in tal caso, si avrà una
disconnessione.
Aumentando la distanza tra il Bluetooth e
l’unità, la qualità audio si reduce; si ha una
disconnessione quando lo spazio tra il Bluetooth
e l’unità supera l’intervallo operativo del
Bluetooth.
La periferica con tecnologia wireless Bluetooth
si disconnette se si spegne l’unità principale
oppure il dispositivo è allontanato dall’unità
principale per oltre 10 m.
HB985-DB.BDEUPPK_ITA.indd 27HB985-DB.BDEUPPK_ITA.indd 27 2010-05-14  2:30:032010-05-14  2:30:03
28 Installazione
Installazione
3
Connessione alla rete
domestica
Questo lettore può essere connesso a una rete
locale (LAN) tramite la porta LAN sul pannello
posteriore.
Per ulteriori informazioni consultare la
documentazione relativa alla propria periferica
di rete. Connettere la porta LAN alla porta
corrispondente del proprio modem o router
usando un cavo LAN o Ethernet disponibile
commercialmente (CAT5 o superiore con
connettore RJ45). Nella con gurazione di
esempio fornita sotto, questo lettore potrà
accedere a contenuti di entrambi PC.
Collegamento rete
Broadband
Service
Router
WAN
LAN 1
LAN 2
LAN 3
Player
PC
PC
Router
Servizio a
banda larga
Lettore
NOTA
Quando si collega o scollega il cavo LAN,
a errare la spina e non il cavo. Quando si
scollega il cavo LAN, non tirarlo ma estrarlo dalla
presa premendo in basso la linguetta.
Non collegare un cavo telefonico modulare alla
porta LAN.
Poiché esistono diverse con gurazioni della
connessione, seguire le speci che della società
telefonica o del fornitore di accesso.
Se si desidera accedere a contenuti dei PC o
dei server DLNA, questo lettore deve essere
connesso a loro tramite un router sulla stessa
rete locale.
HB985-DB.BDEUPPK_ITA.indd 28HB985-DB.BDEUPPK_ITA.indd 28 2010-05-14  2:30:032010-05-14  2:30:03
29Installazione
3
Installazione
Impostazione rete
Prima di impostare la rete cablata è necessario
collegare la rete a banda larga alla rete
domestica.
Se sulla rete locale (LAN) è presente un server
DHCP tramite connessione cablata, questo
lettore riceverà allocato automaticamente
un indirizzo IP. Dopo avere eseguito la
connessione  sica, un certo numero di reti
locali può richiedere una regolazione delle
impostazioni di rete del lettore. Regolare le
impostazioni di rete [RETE] come segue.
1. Selezionare l’opzione [Impost. connessione]
nel menu di [Impostaz.] quindi premere
ENTER (
).
2. Usare i tasti
U
/
u
/
I
/
i
per selezionare la
modalità IP scegliendo tra [Dinamico] e
[Statico].
Solitamente selezionare [Dinamico] per
allocare un indirizzo IP automaticamente.
NOTA
Se sulla rete non ci sono server DHCP e si
desidera impostare il numero di IP manualmente,
selezionare [Statico] quindi impostare [Indirizzo IP],
[Subnet Mask], [Ingresso] e [Server DNS] tramite i
tasti numerici
U
/
u
/
I
/
i
. Se commettete un errore
inserendo il numero, premere CLEAR per cancellare
la sezione evidenziata.
3. Selezionare [OK] e premere ENTER ( ) per
applicare le impostazioni di rete.
4. Il lettore chiederà di veri care la
connessione di rete. Selezionare [OK] e
premere ENTER (
) per completare la
connessione di rete.
5. Se si seleziona [Test] e preme ENTER
( ) al punto 4 di cui sopra, lo stato della
connessione di rete viene visualizzato sullo
schermo.
La connessione di rete può anche essere
testata su [Stato connessione] nel menu di
[Impostaz.].
HB985-DB.BDEUPPK_ITA.indd 29HB985-DB.BDEUPPK_ITA.indd 29 2010-05-14  2:30:032010-05-14  2:30:03
30 Installazione
Installazione
3
Note relative alla connessione di rete:
Molti problemi di connessione di rete
durate la con gurazione possono essere
risolti eseguendo un reset del router o
modem. Dopo avere connesso il lettore
alla rete domestica, accendere e spegnere
il cavo di alimentazione del router delle
rete domestica oppure modem via cavo.
Quindi accendere e/o riconnettere il cavo di
alimentazione.
Dipendendo dal fornitore di servizi Internet
(ISP) il numero di dispositivi che possono
ricevere il servizio Internet può essere
limitato dai termini di servizio applicabili.
Per maggiori dettagli rivolgersi al proprio
gestore del servizio.
La nostra azienda non è responsabile per
eventuali cattivi funzionamenti del lettore
e/o la funzione di connessione a Internet
a causa di errori/cattivi funzionamenti
associati alla connessione a Internet
di banda larga o altre apparecchiature
connesse.
Le funzioni dei dischi BD-ROM resi
disponibili tramite la funzione di
connessione internet non sono create
o fornite dalla nostra azienda e la nostra
azienda non è responsabile per la loro
funzionalità o disponibilità continuata.
Alcuni materiali relativi al disco resi
disponibili tramite la connessione Internet
possono non essere compatibili con questo
lettore. Se avete domande relative a questi
contenuti, rivolgetevi al produttore del
disco.
Alcuni contenuti Internet richiedono una
connessione di rete a banda larga.
Anche se il lettore è connesso e con gurato
correttamente, alcuni contenuti Internet
possono non funzionare correttamente
a causa di congestione di rete, la qualità
della banda del proprio servizio Internet o
problemi con il fornitore dei contenuto.
Alcune operazioni sulle connessioni Internet
possono non essere possibili a causa di date
restrizioni imposte dal fornitore di servizi
internet (ISP) che vi fornisce la connessione
a Internet a banda larga.
Eventuali addebiti imposti dal fornitore
ISP incluso, senza limitazione, i costi di
connessione sono vostra responsabilità.
Per la connessione cablata di questo lettore
è necessaria una porta A 10 Base-T o 100
Base-TX LAN. Se il vostro servizio Internet
non permette questo tipo di connessione,
non sarà possibile collegare il lettore.
Per usare un servizio xDSL è necessario
utilizzare un router.
Per usare un servizio DSL è necessario
un modem DSL e per usare il servizio di
modem cablato è necessario un modem
cablato. ipendendoDipendendo dal
metodo di accesso dell’accordo di licenza
con il vostro ISP, è possibile che la funzione
di connessione Internet del vostro lettore
o è possibile che abbiate un limite ai
dispositivi che possono essere collegati
contemporaneamente. (Se il vostro ISP
limita l’abbonamento ad un dispositivo, è
possibile che a questo questo lettore non
sia permesso connettersi a Internet quando
alla rete è già connesso un PC.)
È possibile che l’uso di un “Router non sia
permesso o sia limitato dipendendo dalle
politiche e restrizioni poste dal ISP.
Per maggiori dettagli rivolgersi direttamente
al proprio ISP.
Spegnere tutte le apparecchiature non
utilizzate presenti sulla rete domestica
locale. Alcuni dispositivi possono generare
tra co di rete.
HB985-DB.BDEUPPK_ITA.indd 30HB985-DB.BDEUPPK_ITA.indd 30 2010-05-14  2:30:032010-05-14  2:30:03
31Installazione
3
Installazione
Collegamento
dispositivo USB
Questo lettore può riprodurre  le video,
musicali e foto contenuti su un dispositivo USB.
1. Inserire un dispositivo USB nella porta USB
no a completo inserimento.
Connessione USB
2. Premere HOME MENU.
Selezionare [Video], [Foto] o [Musica]
usando
U
/
u
/
I
/
i
e premere ENTER ( ).
3. Selezionare un  le tramite
U
/
u
/
I
/
i
e
premere PLAY o ENTER (
) per riprodurre il
le.
Sullo schermo si può controllare la spazio
presente sul dispositivo USB.
4. Selezionare l’altra modalità. Ed estrarre con
attenzione il dispositivo USB.
NOTA
Questo lettore supporta memorie Flash/Disco
rigido sterno formattati FAT16, FAT32 e NTFS
quando accede a  le (musica, foto, video).
Tuttavia, per la registrazione BD-LIVE e Audio
CD, sono supportati solo i formati FAT16 e FAT32.
Usare una memoria USB  ash/disco  sso esterno
formattati con FAT16 o FAT32 quando si usa la
registrazione BD-LIVE e Audio CD.
Il dispositivo USB può essere utilizzato per la
memorizzazione locale per poter vedere dischi
BD Live tramite internet.
Questa unità può supportare  no a 4 partizioni
del dispositivi USB.
Non estrarre il dispositivo USB durante il
funzionamento (riproduzione, ecc.)
Un dispositivo USB che richiede l’installazione
aggiuntiva di un programma quando è
connesso un computer non è supportato.
Dispositivo USB: Dispositivo USB che supporta
USB 1,1 e USB 2,0.
File video, musica e immagine che possono
essere riprodotti. Per informazioni sulle
operazioni su ciascun  le, consultare le pagine
relative.
Si consiglia di eseguire backup regolari per
prevenire la perdita dei dati.
Quando si usa una prolunga USB o lettore USB
multiplo, è possibile che il dispositivo non venga
riconosciuto.
Alcuni dispositivi USB possono non funzionare
con questa unità.
Fotocamere digitali e telefoni cellulari non sono
supportati.
La porta USB su questa unità non può essere
collegata ad un PC.
HB985-DB.BDEUPPK_ITA.indd 31HB985-DB.BDEUPPK_ITA.indd 31 2010-05-14  2:30:032010-05-14  2:30:03
32 Installazione
Installazione
3
Settaggi
Regolare le impostazioni di
con gurazione
Potete cambiare le impostazioni del lettore sul
menu [Impostaz.].
1. Premere HOME MENU (
).
2. Usare
I
/
i/U
/
u
per selezionare [Impostaz.]
e premere ENTER ( ). Appare il menu di
con gurazione [Impostaz.].
3. Usare
U
/
u
per selezionare la prima di
impostazione e premere
i
per passare al
secondo livello.
4. Usare
U
/
u
per selezionare la seconda
opzione di impostazione e poi premere
ENTER (
) per passare al terzo livello.
5. Usare
U
/
u
per selezionare la risoluzione
desiderata quindi premere ENTER ( )
i
per
confermare la selezione.
HB985-DB.BDEUPPK_ITA.indd 32HB985-DB.BDEUPPK_ITA.indd 32 2010-05-14  2:30:042010-05-14  2:30:04
33Installazione
3
Installazione
Menu [DISPLAY]
Aspetto TV
Selezionare un rapporto d’aspetto TV in base al
tipo della propria TV.
[4:3 Letterbox]
Selezionare se è collegato un televisore
standard 4:3. Visualizza le immagini con
barre nere sopra e sotto.
[4:3 Panscan]
Selezionare se è collegato un televisore
standard 4:3. Visualizza immagini tagliate
per riempire lo schermo. Entrambi i lati
dell’immagine sono tagliati.
[16:9 Originale]
Selezionare se è collegato un televisore
16:9. Limmagine a 4:3 è visualizzata con un
rapporto di aspetto 4:3 originale, con barre
nere sul lato destro e sinistro.
[16:9 Full]
Selezionare se è collegato un televisore 16:9.
Limmagine a 4:3 è regolata orizzontalmente
(in proporzione lineare) per riempire tutto
lo schermo.
NOTA
Potete selezionare l’opzione [4:3 Letterbox] e
[4:3 Panscan] quando la risoluzione è impostata ad
una risoluzione superiore a 720p.
Risoluzione
Imposta la risoluzione di uscita del segnale
video Component e HDMI. Vedere la
pagina 23 e 70 per maggiori dettagli relativi
all’impostazione della risoluzione.
[Auto]
Se è collegato il jack HDMI OUT per fornire
i dati di identi cazione dello schermo TV
(EDID), viene selezionata automaticamente
la risoluzione più adatta al televisore
collegato. Se è collegato solo COMPONENT
VIDEO OUT, la risoluzione passa a 1080i
come risolu zione prede nita.
[1080p]
produce 1080 linee di video progressivo.
[1080i]
produce 1080 linee di video interlacciato.
[720p]
produce 720 linee di video progressivo.
[576p (480p)]
produce 576 (480) linee di video
progressivo.
[576i (480i)]
produce 576 (480) linee di video
interlacciato.
HB985-DB.BDEUPPK_ITA.indd 33HB985-DB.BDEUPPK_ITA.indd 33 2010-05-14  2:30:042010-05-14  2:30:04
34 Installazione
Installazione
3
Mod. v. 1080p
Se la risoluzione è impostata su 1080p,
selezionare [24 Hz] per una presentazione
senza disturbi dei  lm (1080p/24 Hz) con
schermo HDMI compatibile con ingresso a
1080p/24 Hz.
NOTA
Se si seleziona [24 Hz], possono veri carsi
disturbi delle immagini quando si passa da
materiali video ai  lm. In questo caso, selezionare
[50 Hz].
Anche se [Mod. v. 1080p] è impostato su
[24 Hz], se il TV non è compatibile con
1080p/24 Hz, la frequenza fotogrammi e ettiva
dell’uscita video sarà di 50 Hz in base al formato
della sorgente video.
Imp. colore HDMI
Selezionare il tipo di uscita dal jack HDMI OUT.
Per questa impostazione, fare riferimento ai
manuali dello schermo.
[YCbCr]
Selezionare quando si collega a uno
schermo HDMI.
[RGB]
Selezionare quando si collega a uno
schermo DVI (RGB).
Menu [LINGUA]
Menu display
Selezionare una lingua per il menu [Impostaz.]
e per le visualizzazioni a schermo.
Menu Disco/ Audio Disco/ Sottotitolo
Disco
Selezionare la lingua preferita per la traccia
audio (disc audio), sottotitoli e menu disco.
[Originale]
Indica la lingua originale in cui è stato
registrato il disco.
[Altro]
Premere ENTER (
) per selezionare un’altra
lingua. Usare i pulsanti numerici quindi
ENTER ( ) per immettere il numero
corrispondente a 4 cifre in base all’elenco
codici lingua a pagina 69.
[O ] (solo per i sottotitoli del disco)
Disattiva i sottotitoli.
NOTA
Dipendendo dal disco è possibile che la funzione
lingua non funzioni.
HB985-DB.BDEUPPK_ITA.indd 34HB985-DB.BDEUPPK_ITA.indd 34 2010-05-14  2:30:042010-05-14  2:30:04
35Installazione
3
Installazione
Menu [AUDIO]
Settaggio Di usori
Per ottenere il miglior audio possibile, usare
il display di con gurazione altoparlanti per
speci care il volume degli altoparlanti connessi
e la loro distanza dal punto di ascolto. Usare
questo test per regolare il volume degli
altoparlanti allo stesso livello.
[Di usore]
Selezionare l’altoparlante che si desidera
regolare.
[Volume]
Regola il livello di uscita di ogni altoparlante.
[Distanza]
Regola la distanza tra ciascuno altoparlante
e la posizione di ascolto.
[Test/ Stop tono test]
Gli altoparlanti emetteranno un tono di test.
[OK]
Conferma le impostazioni.
[Annulla]
Cancella l’impostazione.
HD AV Sync
A volte con la TV digitale ci sono ritardi tra
immagine e audio. Quando si veri ca questa
eventualità potete compensare impostando
un ritardo sull’audio in modo che questo
attenda l’arrivo dell’immagine: questo viene
denominato HD AV Sync. Usare
U u
per
scor
rere verso l’alto e verso il basso il ritardo
che può essere impostato su qualsiasi valore
tra 0 e 300m sec.
Il ritardo varierà in funzione del canale della
TV Digitale su ci si trova. Se si modi ca canale è
possibile che sia necessario risincronizzare HD
AV Sync.
DRC (Controllo range dinamico)
Quando un contenuto codi cato in Dolby
Digital o Dolby Digital Plus viene riprodotto,
potete comprimere l’intervallo dinamico
dell’uscita audio (la di erenza tra i suoni più
forti e quelli più deboli). Questo ti permette
di ascoltare un  lm ad un volume più
basso, senza perdere la chiarezza del suono.
Impostare il [DRC] su [ON] per questo e etto.
NOTA
L’impostazione DRC può essere modi cata solo
quando un disco non viene inserito o l’unità è nella
modalità di arresto completo.
HB985-DB.BDEUPPK_ITA.indd 35HB985-DB.BDEUPPK_ITA.indd 35 2010-05-14  2:30:042010-05-14  2:30:04
36 Installazione
Installazione
3
Menu [BLOCCATO]
Per accedere alle funzioni di [BLOCCATO],
occorre immettere il codice di sicurezza a 4
cifre creato. Se non è ancora stata inserita una
password, verrà chiesto di farlo. Inserire due
volte una password a 4 cifre e premere ENTER
(
) per creare una password nuova.
Password
Potete creare o modi care la password.
[Nessuno]
Inserire due volte una password a 4 cifre
e premere ENTER (
) per creare una
password nuova.
[Modi ca]
Inserire la password attuale e premere
ENTER (
). Inserire due volte una password
a 4 cifre e premere ENTER (
) per creare
una password nuova.
NOTA
Se si commette un errore prima di premere ENTER
( )
, premere CLEAR(ANNULLA). Dopodiché
inserire la password corretta.
Se si dimentica la password,
In caso non si ricordi la password, è possibile
annullarla come segue:
1. Rimuovere eventuali dischi dal lettore.
2. Selezionare l’opzione [Bloccato] nel menu
[Impostaz.].
3. Utilizzare i tasti numerici per inserire “210499”
nel menu [Bloccato]. La password viene
annullata.
Classi cazione DVD
Blocca la riproduzione di DVD classi cati sulla
base dei loro contenuti. (Non tutti i dischi sono
classi cati.)
[Restrizione 1-8]
Il valore 1 presenta le maggiori restrizioni,
mentre il valore 8 presenta restrizioni
minime.
[Sblocca]
Se si seleziona questa opzione, il controllo
parentale non è attivo il disco viene
riprodotto completamente.
Classi cazione BD
Selezionare un limite di età per la riproduzione
di BD-ROM. Usare i tasti numerici per inserire il
limite di età per la visualizzazione di BD-ROM.
[255]
È possibile riprodurre tutti i BD-ROM.
[0-254]
Impedisce la riproduzione di un BD-ROM
con le valutazioni corrispondenti de nite.
NOTA
La [Classi cazione BD] viene applicata solo per
i dischi CD dotati di Advanced Rating Control
(controllo avanzato della classi cazione).
Codice Locale
Immettere il codice dell’area i cui standard
sono stati utilizzati per valutare il DVD, in base
all’elenco a pagina 68.
HB985-DB.BDEUPPK_ITA.indd 36HB985-DB.BDEUPPK_ITA.indd 36 2010-05-14  2:30:042010-05-14  2:30:04
37Installazione
3
Installazione
Menu [RETE]
Impost. connessione
Se la vostra rete domestica è pronta per la
connessione del lettore, il lettore necessita
essere con gurato per la connessione di rete
per poter comunicare sulla rete.
(Vedere “Connessione alla rete domestica alle
pagina 28.)
Stato connessione
Se si desidera controllare lo stato della
connessione di rete su questo lettore,
selezionare le opzioni [Stato connessione] e
premere ENTER ( ) per veri care se sono state
stabilite connessioni alla rete e a Internet.
Collegamento BD-LIVE
È possibile limitare l’accesso a Internet quando
si utilizzano le funzionalità BD-LIVE.
[Consentito]
L’accesso a Internet è consentito per tutti i
contenuti BD-LIVE.
[Parz. Consentito]
L’accesso a Internet è consentito solo per
i contenuti BD-LIVE che dispongono di
certi cati del proprietario. L’accesso a Internet
e le funzionalità AACS Online sono vietati per
tutti i contenuti BD-LIVE senza certi cato.
[Proibito]
L’accesso a Internet è vietato per tutti i
contenuti BD-LIVE.
Menu [ALTRO]
DivX VOD
INFORMAZIONI SU DIVX VIDEO: DivX® è un
formato digitale video creato da DivX, Inc.
Questo dispositivo è un dispositivo originale
certi cato DivX Certi ed® che riproduce DivX
video. Visitate www.divx.com per ulteriori
informazioni e strumenti software per
convertire i vostri  le in DivX video.
INFORMAZIONI SU DIVX VIDEO-ON-DEMAND:
Per riprodurre contenuti Video-on-Demand
(VOD) questo dispositivo originale certi cato
DivX Certi ed® deve essere registrato.
Per generare il codice di registrazione,
individuare la sezione DivX VOD nel menu di
impostazione del dispositivo. Andare a vod.
divx.com con questo codice per completare
il processo di registrazione ed avere ulteriori
informazioni relativamente a DivX VOD.
[Registra]
Visualizza il codice di registrazione del
vostro lettore.
[Disattiva]
Disattivate il lettore e visualizzate il codice
di disattivazione.
NOTA
Tutti i video scaricati da DivX® VOD con il codice
di registrazione di questo lettore possono essere
riprodotti solo su questa unità.
HB985-DB.BDEUPPK_ITA.indd 37HB985-DB.BDEUPPK_ITA.indd 37 2010-05-14  2:30:042010-05-14  2:30:04
38 Installazione
Installazione
3
Spegnimento automatico
Il salvaschermo appare quando si lascia il
lettore in modalità arresto per circa cinque
minuti. Se si imposta l’opzione su [ON],
l’unità si spegne automaticamente quando
il salvaschermo rimane visualizzato per 25
minuti. Impostare questa opzione su [O ]
lasciare il salvaschermo acceso  no a quando
l’unità non viene azionata dall’utente.
Inizializza
Imp.fabbrica
L’unità può essere resettata alle impostazioni
originali di fabbrica.
Canc. mem. BD
Inizializza il contenuto BD dall’unità di
memorizzazione USB connessa.
NOTA
Se si ripristina il lettore alle impostazioni prede nite
utilizzando l’opzione [Imp.fabbrica], bisognerà
impostare di nuovo l’attivazione a tutti i servizi
on-line e di rete.
Info software
Visualizza la versione software corrente.
HB985-DB.BDEUPPK_ITA.indd 38HB985-DB.BDEUPPK_ITA.indd 38 2010-05-14  2:30:042010-05-14  2:30:04
39Installazione
3
Installazione
E etto audio
Potete selezionare una modalità audio adatta.
Premere SOUND ripetutamente  no a quando
non appare la modalità desiderata sul pannello
anteriore o schermo. Gli elementi visualizzati
per l’equalizzatore possono essere diversi
dipendendo dalle fonti audio ed e etti.
[Pioneer 1]: Fornisce una regolazione del
suono adatta con il tipo di collegamento
piccolo degli altoparlanti (S-BD303).
[Pioneer 2]: Fornisce una regolazione del
suono adatta con il tipo di collegamento
grande degli altoparlanti (S-BD707T).
[Bypass]: Software con segnale audio surround
multicanale viene riprodotto in base al modo
con cui è stato registrato.
[Bass Blast]: Rinforza l’e etto audio basso
dagli altoparlanti anteriore destro e sinistro e
subwoofer.
[PL ll Movie]: Esegue la decodi ca modalità
lm Pro Logic ll del segnale di ingresso e
produce cinque canali di uscita a banda
completa da 2 sorgenti canale. Questa
impostazione è ideale per la visione di video di
vecchi  lm o  lm doppiati. Questa modalità è
disponibile solo per 2 sorgenti canale.
[PL ll Music]: Esegue la decodi ca modalità
musica Pro Logic ll del segnale di ingresso
e produce cinque canali di uscita a banda
completa da 2 sorgenti canale. Questa
impostazione è l’ideale sia per gli stereo
normali che per i CD. Questa modalità è
disponibile solo per 2 sorgenti canale.
[Clear Voice]: Questa modalità rende il suono
della voce chiaro migliorando la qualità
dell’audio vocale.
[Game]: Potete godere di un audio più virtuale
durante il gioco dei giochi video.
[Night]: Questo può essere utile quando si
guardano  lm a basso volume a notte tarda.
[Mus. ReTouch]: Quando si ascoltano  le MP3
o altra musica compressa è possibile migliorare
l’audio. Questa modalità è disponibile solo per
2 sorgenti canale.
[Loudness]: Migliora l’audio dei bassi e degli
acuti.
HB985-DB.BDEUPPK_ITA.indd 39HB985-DB.BDEUPPK_ITA.indd 39 2010-05-14  2:30:042010-05-14  2:30:04
40 Uso
Uso
4
Riproduzione
generale
Riproduzione dei dischi
1. Premere
Z
OPEN/CLOSE e posizionare il
disco sul vassoio portadisco.
2. Premere
Z
OPEN/CLOSE per chiudere il
vassoio portadischi e.
Con la maggioranza di dischi Audio CD,
BD-ROM e DVD-ROM la riproduzione viene
avviata automaticamente.
3. Premere
HOME MENU.
4. Selezionare [Video], [Foto] o [Musica]
usando
U
/
u
/
I
/
i
e premere ENTER ( ).
5. Selezionare l’opzione Disc tramite
I
/
i
e
premere ENTER (
).
Quando si connettono fino a due dispositivi
compare come sopra.
6. Selezionare un  le tramite
U
/
u
/
I
/
i
,
e premere
B
(PLAY) o ENTER (
) per
riprodurre il  le.
NOTA
Le funzioni di riproduzione descritte i questo
manuale non sono sempre disponibili con ogni
le e supporto. Alcune funzioni possono essere
limitate dipendendo da molti fattori.
Dipendendo dai titoli BD-ROM, per la
riproduzione corretta è possibile che sia
necessaria una connessione con dispositivo USB.
4
Uso
HB985-DB.BDEUPPK_ITA.indd 40HB985-DB.BDEUPPK_ITA.indd 40 2010-05-14  2:30:042010-05-14  2:30:04
41Uso
4
Uso
Per interrompere l
Premere
x
STOP durante la riproduzione.
Per sospendere l
Premere
X
PAUSE/STEP durante la
riproduzione.
Premere
B
PLAY per riprendere la riproduzione.
Riproduzione fotogramma per
fotogramma
Premere
X
PAUSE/STEP durante la
riproduzione di  lm.
Premere ripetutamente
X
PAUSE/STEP per
riprodurre fotogramma per fotogramma.
Scansione avanti o indietro
Durante la riproduzione premere
m
o
M
per l’avanzamento veloce o il riavvolgimento
veloce.
È possibile cambiare varie velocità di
riproduzione premendo ripetutamente
m
o
M
.
Rallentare la velocità di riproduzione
Con la riproduzione in pausa, premere
M
SCAN ripetutamente per avviare
la riproduzione con diverse velocità di
rallentatore.
Saltare il capitolo/traccia o  le
precedente/successivo
Durante la riproduzione, premere
.
o
>
per passare al capitolo/brano/ le successivo
o tornare all’inizio del capitolo/brano/ le
corrente.
Premere brevemente
.
due volte per
tornare al capitolo/brano/ le precedente.
Uso del menu disco
BD
DVD
AVCHD
Visualizzazione del menu disco
La schermata di menu può essere visualizzata
in primo luogo dopo il caricamento del disco
che contiene un menu. Se si vuole visualizzare
il menu disco durante la riproduzione, premere
MENU.
Usare i pulsanti
U
/
u
/
I
/
i
per navigare le voci
del menu.
Visualizzazione del menu popup
Alcuni dischi BD-ROM contengono menu
Pop-up che vengono visualizzati durante la
riproduzione.
Premere POPUP/ TOP MENU durante la
riproduzione, e usare i pulsanti
U
/
u
/
I
/
i
per
navigare le voci del menu.
Riprendere riproduzione
BD
DVD
AVCHD
MOVIE
ACD
MUSIC
L’unità registra il punto in cui avete premuto il
x
(STOP) dipendendo dal disco.
Se “
Xx
(Resume Stop)” (Riprendi Stop) appare
sullo schermo brevemente, premere
B
(PLAY)
riprendere la riproduzione (dal punto scena).
Se si preme
x
(STOP) due volte o si scarica
il disco,
x
”(Complete Stop) appare sullo
schermo. L’unità annulla il punto di arresto.
NOTA
Il punto di ripresa può essere cancellato quando
si preme un pulsante (ad esempio;
1
(POWER),
Z
(OPEN/CLOSE), ecc).
Sui dischi BD-Video con BD-J, la funzione di
ripresa riproduzione non funziona.
Se si preme
x
(STOP) una volta durante la
riproduzione di un titolo BD-ROM interattivo,
l’unità si troverà nella modalità di arresto completo.
HB985-DB.BDEUPPK_ITA.indd 41HB985-DB.BDEUPPK_ITA.indd 41 2010-05-14  2:30:052010-05-14  2:30:05
42 Uso
Uso
4
Riproduzione
avanzata
Ripetere la riproduzione
BD
DVD
AVCHD
ACD
MUSIC
Durante la riproduzione, premere REPEAT (
)
ripetutamente per selezionare una modalità di
ripetizione.
BD/DVD
A-
– La vostra sezione selezionata verrà
ripetuta continuamente.
Capitolo
– Il  le corrente viene riprodotto
ripetutamente.
Title
Titolo
– Il  le corrente viene riprodotto
ripetutamente.
Per tornare alla riproduzione normale,
premere ripetutamente REPEAT (
) per
selezionare [O ].
Audio CD/File musicali
– Il  le corrente o traccia viene
riprodotto ripetutamente.
Tutte le tracce o  le vengono
riprodotti ripetutamente.
– Le tracce o  le vengono riprodotti in
ordine casuale.
Tutte le tracce o  le vengono
riprodotti in ordine casuale.
– La vostra sezione selezionata verrà
ripetuta continuamente. (Solo AUDIO CD).
Per riprendere la riproduzione normale,
premere CLEAR.
NOTA
Se si preme
>
una volta durante la
riproduzione Ripeti Capitolo/ Traccia, la
riproduzione ripetuta viene annullata.
È possibile che questa funzione non sia funzioni
con alcuni dischi o titolo.
Ripetizione di una sezione
speci ca
BD
DVD
AVCHD
ACD
Questo lettore non è in grado di ripetere una
porzione speci cata.
1. Durante la riproduzione, premere REPEAT
(
) per selezionare [A-] all’inizio della
porzione che si desidera ripetere. E quindi
premere ENTER ( ).
2. Premere ENTER (
) alla  ne di ogni
porzione. La vostra sezione selezionata verrà
ripetuta continuamente.
3. Per tornare alla riproduzione normale,
pr
emere ripetutamente REPEAT ( ) per
selezionare [o ] oppure premere CLEAR.
NOTA
Non potete selezionare una sezione inferiore a 3
secondi.
Ricerca con contrassegno
BD
DVD
AVCHD
MOVIE
È possibile avviare la riproduzione da un
massimo di nove punti registrati.
Per immettere un contrassegno
1. Durante la riproduzione, premere MARKER
(Contrassegno) nel punto desiderato.
Licona Marker appare brevemente sullo
schermo.
2. Ripetere il punto 1 per aggiungere  no a
nove segnalibri.
HB985-DB.BDEUPPK_ITA.indd 42HB985-DB.BDEUPPK_ITA.indd 42 2010-05-14  2:30:052010-05-14  2:30:05
43Uso
4
Uso
Per richiamare una scena
contrassegnata
1. Premere SEARCH; viene visualizzato il menu
di ricerca sullo schermo.
2. Premere un pulsante numerico per
selezionare il contrassegno da richiamare.
La riproduzione viene avviata dalla scena
contrassegnata.
Eliminare un segnalibro
1. Premere SEARCH; viene visualizzato il menu
di ricerca sullo schermo.
2. Premere
u
per evidenziare un numero di
contrassegno. Usare
I
/
i
per selezionare
una scena evidenziata che si desidera
eliminare.
3. Premere CLEAR; la scena contrassegnata
viene cancellata dal menu di ricerca.
NOTA
Questa funzione può non funzionare
dipendendo dai dischi, titoli o capacità del
server.
Tutti i punti contrassegnati vengono cancellati
se il titolo è nella modalità di fermo completo
(
x
), il titolo viene cambiato o se il disco viene
scaricato.
Se la lunghezza totale del titolo è inferiore a 10
secondi, questa funzione non è disponibile.
Utilizzo del menu di ricerca
BD
DVD
AVCHD
MOVIE
Usando il menu di ricerca si può trovare
agevolmente il punto dal quale si desidera
avviare la riproduzione.
Cercare un punto
1. Durante la riproduzione, premere SEARCH
per visualizzare il menu di ricerca.
2. Premere
I
/
i
per andare avanti o indietro di
15 secondi. È possibile selezionare il punto
che si desidera saltare tenendo premuto il
tasto
I
/
i
.
Avviare la riproduzione da un punto
contrassegnato
1. Premere SEARCH; viene visualizzato il menu
di ricerca sullo schermo.
2. Premere
u
per evidenziare un numero di
contrassegno. Usare
I
/
i
per selezionare la
scena evidenziata di cui si desidera avviare
la riproduzione.
3. Premere ENTER (
) per avviare la
riproduzione dalla scena evidenziata.
NOTA
Questa funzione può non funzionare
dipendendo dai dischi, titoli o capacità del
server.
Questa funzione può non funzionare su alcuni
contenuti [Coll. Home] dipendendo dal tipo di
le e capacità del server DLNA.
HB985-DB.BDEUPPK_ITA.indd 43HB985-DB.BDEUPPK_ITA.indd 43 2010-05-14  2:30:052010-05-14  2:30:05
44 Uso
Uso
4
Memorizzazione dell’ultima
scena
BD
DVD
Questa unità è in grado di memorizzare
l’ultima scena dell’ultimo disco visualizzato.
L’ultima scena rimane in memoria anche se
si rimuove il disco o si spegne l’unità. Se si
carica un disco la cui ultima scena è stata
memorizzata, quest’ultima viene richiamata
automaticamente.
NOTA
L’ultima scena memorizzata di un disco
precedente viene cancellata non appena viene
riprodotto un altro disco.
Con alcuni dischi, questa funzione potrebbe non
funzionare.
Questo lettore non memorizza le impostazioni
di un disco se l’unità viene spento prima di
iniziare la riproduzione.
Visualizzazione su
schermo
Si possono visualizzare e regolare varie
informazioni e impostazioni del contenuto.
Visualizzazione di contenuto
sullo schermo
BD
DVD
AVCHD
MOVIE
1. Durante la riproduzione premere DISPLAY
(
) per visualizzare le varie informazioni di
riproduzione.
a
h
g
f
e
d
c
b
a
Titolo – numero del titolo corrente/
numero complessivo di titoli.
b
Capitolo – tempo trascorso di
riproduzione /tempo complessivo di
riproduzione
c
Tempo – tempo trascorso di riproduzione
/tempo complessivo di riproduzione
d
Audio – Scelta della lingua o del canale
audio
e
Sottotitolo – Sottotitolo selezionato
f
Angolo – Angolazione selezionata/
numero totale di angolazioni
HB985-DB.BDEUPPK_ITA.indd 44HB985-DB.BDEUPPK_ITA.indd 44 2010-05-14  2:30:052010-05-14  2:30:05
45Uso
4
Uso
g
Aspetto TV – Rapporto d’aspetto della
TV selezionato
h
Mod. immagine – modo immagine
selezionato.
2. Selezionare unopzione usando
U
/
u
.
3. Usare
I
/
i
per selezionare il parametro
desiderato per l’opzione.
4. Premere RETURN (
O
) per uscire dal menu
su schermo.
NOTA
Se non vengono premuti pulsanti per un paio di
secondi, il display su schermo scompare.
Un numero di titolo non può essere selezionato
su alcuni dischi.
Le voci disponibili possono essere diversi
dipendendo dai dischi e dai titoli.
Durante la riproduzione di un titolo interattivo
BD, alcune informazioni sulle impostazioni
vengono visualizzate sullo schermo ma non è
possibile modi carle.
Riproduzione a partire da un
punto desiderato
BD
DVD
AVCHD
MOVIE
1. Premere DISPLAY (
) durante la
riproduzione. La casella di ricerca tempo
visualizza il tempo trascorso.
2. Selezionare l’opzione [Tempo] quindi
inserire il tempo di inizio desiderato
indicando le ore, i minuti e i secondi da
sinistra a destra.
Per esempio, per trovare una scena a 2 ore,
10 minuti e 20 secondi, inserire “21020”.
Premere
I
/
i
per andare avanti o indietro di
60 secondi.
3. Premere ENTER (
) per avviare la
riproduzione dall’ora speci cata.
NOTA
Questa funzione può non funzionare su alcuni
dischi o titoli.
Questa funzione può non funzionare su alcuni
contenuti [Coll. Home] dipendendo dal tipo di
le e capacità del server DLNA.
HB985-DB.BDEUPPK_ITA.indd 45HB985-DB.BDEUPPK_ITA.indd 45 2010-05-14  2:30:052010-05-14  2:30:05
46
Uso
Uso
4
Ascolto di un diverso audio
BD
DVD
AVCHD
MOVIE
1. Durante la riproduzione, premere DISPLAY
(
) per visualizzare il menu su schermo.
2. Usare
U
/
u
per selezionare l’opzione [Audio].
3. Usare
I
/
i
per selezionare la lingua audio
desiderata, traccia audio o canale audio.
NOTA
Alcuni dischi consentono di cambiare le
selezioni audio solo attraverso il menu del disco.
In questo caso, premere il pulsante POPUP/ TOP
MENU o MENU e scegliere l’audio appropriato
dalle opzioni del menu.
Subito dopo aver cambiato l’impostazione
dell’audio, può veri carsi una discrepanza
temporanea tra immagine e audio.
Scelta della lingua dei
sottotitoli
BD
DVD
AVCHD
MOVIE
1. Durante la riproduzione, premere DISPLAY
(
) per visualizzare il menu su schermo.
2. Usare
U
/
u
per selezionare l’opzione
[Sottotitolo].
3. Usare
I
/
i
per selezionare la lingua
desiderata per i sottotitoli.
4. Premere RETURN (
O
) per uscire dal menu
su schermo.
NOTA
Alcuni dischi consentono di cambiare le selezioni
dei sottotitoli solo attraverso il menu del disco.
In questo caso, premere il pulsante POPUP/ TOP
MENU o MENU e scegliere il sottotitolo appropriato
dalle opzioni del menu.
HB985-DB.BDEUPPK_ITA.indd 46HB985-DB.BDEUPPK_ITA.indd 46 2010-05-14  2:30:052010-05-14  2:30:05
47
Uso
4
Uso
Visione da un’angolazione
diversa
BD
DVD
Se il disco contiene scene registrate a
di erenti angolazioni della telecamera, è
possibile cambiare l’angolazione durante la
riproduzione.
1. Durante la riproduzione, premere DISPLAY
( ) per visualizzare il menu su schermo.
2. Usare
U
/
u
per selezionare l’opzione
[Angolo].
3. Usare
I
/
i
per selezionare l’angolo
desiderato.
4. Premere RETURN (
O
) per uscire dal menu
su schermo.
Modi ca del rapporto di
aspetto della TV
BD
DVD
AVCHD
MOVIE
Si può modi care il rapporto di aspetto della
TV durante la riproduzione.
1. Durante la riproduzione, premere DISPLAY
(
) per visualizzare il menu su schermo.
2. Usare
U
/
u
per selezionare l’opzione
[Aspetto TV].
3. Usare
I
/
i
per selezionare l’opzione
desiderata.
4. Premere RETURN (
O
) per uscire dal menu
su schermo.
NOTA
Anche se si modi ca il valore dell’opzione
[Aspetto TV] l’opzione [Aspetto TV] nel menu di
con gurazione [Impostaz.] non viene modi cata.
Modi ca della modalità
immagine
BD
DVD
AVCHD
MOVIE
Si può modi care la [Mod. immagine] durante
la riproduzione.
1. Durante la riproduzione, premere DISPLAY
(
) per visualizzare il menu su schermo.
2. Usare
U
/
u
per selezionare l’opzione [Mod.
immagine].
3. Usare
I
/
i
per selezionare l’opzione
desiderata.
4. Premere RETURN (
O
) per uscire dal menu
su schermo.
Impostazione dell’opzione [Imp ut]
1. Durante la riproduzione, premere DISPLAY
( ) per visualizzare il menu su schermo.
2. Usare
U
/
u
per selezionare l’opzione [Mod.
immagine].
3. Usare
I
/
i
per selezionare l’opzione
[Imp ut] e premere ENTER (
).
4. Usare
U
/
u
/
I
/
i
per regolare l’opzione [Mod.
immagine].
Selezionare l’opzione [Default] quindi
premere ENTER ( ) per ripristinare tutte le
regolazioni video.
5. Usare
U
/
u
/
I
/
i
per selezionare l’opzione
[Chiudi] e premere ENTER (
) per terminare
l’impostazione.
HB985-DB.BDEUPPK_ITA.indd 47HB985-DB.BDEUPPK_ITA.indd 47 2010-05-14  2:30:062010-05-14  2:30:06
48
Uso
Uso
4
Gustare BD-LIVE
Questa unità consente di utilizzare funzionalità
come picture- in-picture, audio secondario
e pacchetti Virtuali, ecc., con BD-Video che
supporta BONUSVIEW (BD-ROM versione 2
Pro le 1 versione 1.1/ Final Standard Pro le).
Audio e video secondari possono essere
riprodotti da un disco compatibile con
la funzione picture-in-picture (immagine
nell’immagine). Per il metodo di riproduzione
vedere le istruzioni fornite con il disco.
Oltre alla funzione di BONUSVIEW, il BD-Video
con supporto BD-LIVE (BD-ROM versione 2
Pro lo 2) con funzione di estensione di rete
permette di usare più funzioni quali scaricare
i trailer dei nuovi  lm in uscita tramite la
connessione di questa unità a Internet.
1. Controllare la connessione di rete e le
impostazioni (Pagine 28-30).
2. Inserire un dispositivo di memorizzazione
nella porta USB sul pannello anteriore.
Per scaricare i contenuti bonus è
necessario disporre di un dispositivo di
memorizzazione USB.
Connessione USB
3 . Premere HOME MENU, e impostare
l’opzione [Collegamento BD-LIVE] nel menu
di [Impostaz.] (pagina 37).
In base al disco, la funzionalità BD-
LIVE può non essere attiva se l’opzione
[Collegamento BD-LIVE] è impostata su
[Parz. Consentito].
4 . Inserire un BD-ROM con BD-LIVE.
Le operazioni variano in funzione del disco.
Vedere il manuale fornito con il disco.
NOTA
Non estrarre il dispositivo USB collegato durante
il download del contenuto o se un disco Blu-
ray è nel vassoio. In questo caso è possibile
danneggiare il dispositivo USB collegato e le
funzionalità BD-LIVE potrebbero non funzionare
più correttamente con il dispositivo USB
danneggiato. Se il dispositivo USB collegato
appare sembra danneggiato da tale azione, è
possibile formattare il dispositivo USB dal PC e
riutilizzarlo con questo lettore.
In alcuni paesi, l’accesso ad alcuni contenuti
BD-LIVE potrebbe essere limitato, a seguito di
decisioni del fornitore del contenuto stesso.
Per caricare e avviare la riproduzione dei
contenuti BD-LIVE sono necessari alcuni minuti.
HB985-DB.BDEUPPK_ITA.indd 48HB985-DB.BDEUPPK_ITA.indd 48 2010-05-14  2:30:062010-05-14  2:30:06
49
Uso
4
Uso
Riproduzione di un
le video e disco VR
Potete riprodurre i dischi DVD-RW che sono
stati registrati con il formato Video Recording
(VR) e  le video contenuti su un disco o
dispositivo USB.
1. Premere
HOME MENU.
2. Selezionare l’opzione [Video] usando
U
/
u
/
I
/
i
e premere ENTER ( ).
3. Selezionare il dispositivo usando
I
/
i
e
premere ENTER ( ).
Quando si connettono fino a due dispositivi
compare come sopra.
4. Selezionare un  le tramite
U
/
u
/
I
/
i
, e
premere
B
PLAY o ENTER ( ) per riprodurre
il  le.
NOTA
I requisiti per i  le sono descritti a pagina 11.
È possibile utilizzare diverse funzioni di
riproduzione. Vedere le pagine 40-47.
I dischi in formato DVD-VR non  nalizzati non
possono essere riprodotti in questo lettore.
Alcuni dischi DVD-VR sono realizzati con dati
CPRM con DVD RECORDER. Questa unità non
supporta tali tipi di dischi.
Che cos’è CPRM?
CPRM è un sistema di protezione dalla copia
(con sistema di codi ca) che consente solo
la registrazione a copia unica’ dei programmi
trasmessi. CPRM è l’acronimo di Content
Protection for Recordable Media.
HB985-DB.BDEUPPK_ITA.indd 49HB985-DB.BDEUPPK_ITA.indd 49 2010-05-14  2:30:062010-05-14  2:30:06
50
Uso
Uso
4
Selezione della  le dei
sottotitoli.
MOVIE
Se un nome di  le video e nome di  le di
sottotitoli sono uguali, il  le di sottotitoli
viene riprodotto automaticamente con la
riproduzione del  le video.
Se il nome del  le di sottotitoli è diverso da
quello del  le video, è necessario selezionare
il nome del  le sottotitoli nel menu [Video]
prima di riprodurre il  le.
1. Usare
U
/
u
/
I
/
i
per selezionare il  le di
sottotitoli che si desidera riprodurre nel
menu [Video].
2. Premere ENTER (
).
Premere ENTER ( ) nuovamente per
deselezionare il  le di sottotitoli. Il  le di
sottotitoli selezionato viene visualizzato
durate la riproduzione del  le video.
NOTA
S si preme
x
STOP durante la riproduzione la
selezione sottotitolo viene annullata.
Questa funzione può non funzionare con la
funzione [Coll. Home].
Modi ca della pagina di codice
sottotitoli
MOVIE
Se i sottotitoli non vengono visualizzati in
modo corretto, è possibile modi care la
pagina di codice sottotitoli per visualizzare
correttamente il  le.
1. Durante la riproduzione, premere DISPLAY
(
) per visualizzare il menu su schermo.
2. Usare
U
/
u
per selezionare l’opzione
[Pagina codice].
3. Usare
I
/
i
per selezionare l’opzione codice
desiderata.
4. Premere RETURN (
O
) per uscire dal menu
su schermo.
HB985-DB.BDEUPPK_ITA.indd 50HB985-DB.BDEUPPK_ITA.indd 50 2010-05-14  2:30:062010-05-14  2:30:06
51
Uso
4
Uso
Visualizzazione di
fotogra e
Con questo lettore è possibile visualizzare  le
di immagini.
1. Premere
HOME MENU
2. Selezionare l’opzione [Foto] usando
I
/
i
e
premere ENTER ( ).
3. Selezionare il dispositivo tramite
I
/
i
, e
premere ENTER ( ).
Quando si connettono fino a due dispositivi
compare come sopra.
4. Selezionare un  le tramite
U
/
u
/
I
/
i
, e
premere ENTER (
) per visualizzare la foto.
Esecuzione della presentazione
Premere
B
PLAY per avviare la presentazione.
Fermare una presentazione.
Premere
x
STOP durante la presentazione.
Fermare temporaneamente una
presentazione.
Premere
X
PAUSE/STEP durante la
presentazione.
Premere
B
PLAY per riprendere la proiezione.
Passare alla foto precedente /
successiva
Durante la visualizzazione di una foto a tutto
schermo premere
I
o
i
per passare alla foto
precedente o successiva.
NOTA
I requisiti per i  le sono descritti a pagina 11.
È possibile utilizzare diverse funzioni di
riproduzione. Vedere le pagine 40-47.
HB985-DB.BDEUPPK_ITA.indd 51HB985-DB.BDEUPPK_ITA.indd 51 2010-05-14  2:30:062010-05-14  2:30:06
52
Uso
Uso
4
Opzioni durante la
visualizzazione di una foto
Potete usare varie funzioni durante la visione di
una foto a tutto schermo.
1. Durante la visione di una foto a tutto
schermo, premere DISPLAY (
) per
visualizzare il menu delle opzioni.
2. Selezionare unopzione usando
U
/
u
.
a
g
f
e
d
c
b
h
a
Foto corrente/Numero totale di foto
– Usare
I
/
i
per visualizzare la foto
precedente/successiva.
b
Present. – Premere ENTER (
) per avviare
o mettere in pausa la presentazione.
c
Sel. musica – Selezione della musica di
sottofondo per la presentazione.
d
Musica –Premere ENTER (
) per avviare o
mettere in pausa la musica di sottofondo.
e
Ruota – Premere ENTER (
) per ruotare la
foto in senso orario.
f
Zoom – Premere ENTER (
) per
visualizzare il menu [Zoom].
g
e etto – Usare
I
/
i
per selezionare
un e etto di transizione tra foto in una
presentazione.
h
Intervallo – Usare
I
/
i
per selezionare
un e etto di ritardo tra foto in una
presentazione.
3. Premere RETURN (
O
) per chiudere il menu
delle opzioni.
Ascolto musica della musica
durante la presentazione
diapositive
Potete visualizzare i  le di foto durante l’ascolto
dei  le musicali.
1. Premere
HOME MENU
2. Selezionare [Foto] o [Coll. Home] usando
U
/
u
/
I
/
i
, e premere ENTER ( ).
3. Selezionare l’opzione [Disco] o [USB] tramite
I
/
i
e premere ENTER ( ).
Per il menu [Coll. Home] è necessaria la
selezione di un server o cartella condivisa.
4. Selezionare un  le tramite
U
/
u
/
I
/
i
, e
pr
emere ENTER ( ) per visualizzare le foto.
5. Premere DISPLAY (
) per visualizzare il
menu delle opzioni.
6. Usare
U
/
u
per selezionar
e l’opzione
[Sel. musica] e premere ENTER ( ) per
visualizzare il menu [Sel. musica].
HB985-DB.BDEUPPK_ITA.indd 52HB985-DB.BDEUPPK_ITA.indd 52 2010-05-14  2:30:072010-05-14  2:30:07
53
Uso
4
Uso
7. Utilizzare
U
/
u
per selezionare un dispositivo
e quindi premere ENTER ( ).
I dispositivi che potete selezionare possono
essere diverse dipendendo sulla posizione
dei  le di foto che si stanno visualizzando a
tutto schermo.
Posizione foto Dispositivo
disponibile
Disco Disco, USB
USB Disco, USB
Condividere
cartella sul
proprio PC (CIFS)
CIFS
Server DLNA Server DLNA
8. Usare
U
/
u
per selezionar
e il  le o cartella
che si desidera riprodurre.
Selezionare una cartella e premere ENTER
(
) per visualizzare la cartella inferiore.
Selezionare
e premere ENTER ( ) per
visualizzare la cartella superiore.
NOTA
Quando si seleziona musica da [Coll. Home], la
scelta della cartella non è disponibile.
Su [Coll. Home] è disponibile solo la selezione del
le.
9. Usare
i
per selezionare [OK] e premere
ENTER ( ) per completare la selezione
musicale.
Ascolto dei brani
musicali
Questa unità è in grado di riprodurre CD Audio
e  le musicali.
1. Premere
HOME MENU
2. Selezionare l’opzione [Musica] usando
U
/
u
/
I
/
i
e premere ENTER ( ).
3. Selezionare il dispositivo tramite
I
/
i
, e
premere ENTER ( ).
Quando si connettono fino a due dispositivi
compare come sopra.
4. Selezionare un  le musicale o traccia audio
tramite
U
/
u
/
I
/
i
, e premere ENTER ( ) per
riprodurre la musica.
NOTA
I requisiti per i  le sono descritti a pagina 11.
È possibile utilizzare diverse funzioni di
riproduzione. Vedere le pagine 40-47.
HB985-DB.BDEUPPK_ITA.indd 53HB985-DB.BDEUPPK_ITA.indd 53 2010-05-14  2:30:072010-05-14  2:30:07
54
Uso
Uso
4
Registrazione Audio CD
Si può registrare una traccia o tutte le tracce
desiderate da un CD audio su un dispositivo di
memorizzazione.
1. Inserire un dispositivo di memorizzazione
nella porta USB sul pannello anteriore.
2. Premere
Z
(OPEN/CLOSE) e posizionare un
CD audio sul vassoio portadisco.
Premere
Z
(OPEN/CLOSE) per chiudere il
vassoio portadischi e. La riproduzione inizia
automaticamente.
3. Premere DISPLAY (
) per visualizzare il
menu delle opzioni.
Oppure
Premere il tasto
z
USB REC sul
telecomando.
Potete registrare tutta la musica sul CD
audio.
4. Usare
U
/
u
per selezionare l’opzione
[Registrazione CD] e premere ENTER (
)
per visualizzare il menu [Registrazione CD].
Ripetere questo passo per selezionare tutte
le tracce desiderate.
5. Usare
U
/
u
per selezionare la traccia che si
desidera copiare sul menu e premere ENTER
(
).
Ripetere questo passo per selezionare tutte
le tracce desiderate.
Selezionare tutte le tracce su un
CD audio.
Seleziona unopzione di codi ca
dal menu di pop-up menu
(128 kbps, 192 kbps, 320 kbps o
Lossless).
Chiude la registrazione e riporta
alla schermata principale.
6. Usare
U
/
u
/
I
/
i
per selezionate [Start] e
premete ENTER (
).
7. Usare
U
/
u
/
I
/
i
selezionare la cartella di
destinazione da copiare.
Se si desidera creare una cartella nuova
usare
U
/
u
/
I
/
i
per selezionare [Nuova
cartella] e premere ENTER ( ).
Inserire un nome di cartella tramite la
tastiera virtuale e premere ENTER ( ) con
[OK] è selezionato.
8. Usare
U
/
u
/
I
/
i
per selezionare [OK]
e premere ENTER (
) per avviare la
registrazione CD audio.
Se si desidera interrompere la registrazione
audio CD in corso, premere ENTER ( ) con
[Annulla] evidenziato.
9. Quando è completata la registrazione audio
CD appare un messaggio. Premere ENTER
(
)per veri care il  le musicale creato nella
cartella di destinazione.
HB985-DB.BDEUPPK_ITA.indd 54HB985-DB.BDEUPPK_ITA.indd 54 2010-05-14  2:30:082010-05-14  2:30:08
55
Uso
4
Uso
NOTA
La tabella sotto mostra il tempo medio di
registrazione da una traccia audio con 4 minuti
di tempo di riproduzione su un  le musicale con
192 kbps come esempio.
Modalità Stop Durante la
riproduzione
1,4 min. 2 min.
Tutti i tempi riportati nella tabella di cui sopra
sono approssimativi.
Il tempo di ripping per il dispositivo di
memorizzazione USB varia in funzione delle
capacità di archiviazione del dispositivo USB.
Accertarsi che vi siano almeno minimo 50MB di
spazio libero quando si registra sul dispositivo di
memorizzazione USB.
La lunghezza della musica deve essere superiore
a 20 secondi per una registrazione corretta.
Non spegnere il lettore o rimuovere il dispositivo
di archiviazione USB durante la registrazione
Audio CD.
La copia non autorizzata di materiale protetto,
compresi programmi per computer,  le,
trasmissioni e registrazioni audio, potrebbe
infrangere i diritti d’autore e costituire reato.
Questo apparecchio non dovrebbe essere usato
per tali propositi.
Siate responsabili
Rispettate i diritti d’autore
HB985-DB.BDEUPPK_ITA.indd 55HB985-DB.BDEUPPK_ITA.indd 55 2010-05-14  2:30:082010-05-14  2:30:08
56
Uso
Uso
4
Riproduzione del iPod
Potete godere dell’audio del vostro iPod.
Per maggiori dettagli riguardo iPod vedere la
guida dell’utente iPod.
Preparazione
Per visualizzare i video e foto iPod sullo
schermo TV.
- Accertarsi di utilizzare la connessione
video tramite il jack VIDEO OUT sul
pannello posteriore di questa unità.
Selezionare la modalità di ingresso video
appropriata sulla TV.
- Dipendendo dall’iPod, accertarsi che le
impostazioni video di video > e quindi
impostare TV Out su Ask o On dall’iPod.
Per maggiori dettagli riguardo le
impostazioni video vedere la guida
dell’utente iPod.
- la visione delle foto è disponibile solo
se questa unità è nella modalità iPod
IN e si possono vedere foto solo come
presentazione. Dovete avviare una
presentazione sull’iPod per vedere una foto
su una TV. Per maggiori dettagli riguardo
una presentazione vedere la guida
dell’utente iPod.
Prima di connettere l’iPod spegnere questa
unità e ridurre il volume dell’unità al
minimo.
1. Connettere saldamente l’unità iPod.
Collegare l’iPod
Collegare la base e
posizionarvi l’iPod.
2. Selezionare un  le usando
U
/
u
/
I
/
i
, quindi
premere ENTER per avviare la riproduzione.
Visualizzazione iPod sullo
schermo
1. Connettere saldamente l’unità iPod.
2. Premere HOME MENU (
).
3. Selezionare [Musica] oppure [Video] usando
I
/
i
, quindi premere ENTER ( ).
Se si è connesso l’altro dispositivo (CD o
USB), selezionare iPod sul menu.
4. Selezionare un contenuto usando
U
/
u
/
I
/
i
, e premere ENTER (
).
HB985-DB.BDEUPPK_ITA.indd 56HB985-DB.BDEUPPK_ITA.indd 56 2010-05-14  2:30:082010-05-14  2:30:08
57
Uso
4
Uso
Utilizzare l’iPod in modalità
iPod IN
È possibile utilizzare l’iPod tramite il
telecomando fornito e i controlli dell’iPod.
1. Connettere saldamente l’unità iPod.
Se si accende questa unità il vostro iPod
viene automaticamente acceso e viene
riavviata la ricarica.
2. Premere INPUT/TUNER per selezionare la
funzione iPod.
U
/
u
/
I
/
i
Seleziona unopzione di menu.
B
/ENTER
Avvia la riproduzione di musica
o video.
X
Per mettere i pausa durante la
riproduzione. Per riprendere
la riproduzione, premere
nuovamente
B
(PLAY).
m
/
M
Avanti veloce o riavvolgi un
brano o video
.
/
>
Salta la riproduzione avanti o
indietro.
REPEAT Premere ripetutamente per
selezionare una modalità di
ripetizione: Traccia (
), Tutto
(
), O (No display).
NOTA
Questo sistema è compatibile con il sistema audio
e video di iPod (4 generazione), iPod nano, iPod
classic, iPod mini, iPod touch e iPhone.
(L’iPod shu e non è supportato).
NOTA
Un messaggio di errore “CHECK IPOD (controllare
IPOD) o “Connected iPod model is not supported” (il
modello iPod collegato non è supportato) appare
quando:
- il vostro iPod non è disponibile per la funzione da
usare.
t
Aggiornare il software iPod all’ultima versione
disponibile.
Se questa unità visualizza un messaggio di errore,
seguire il messaggio. Un messaggio di errore
“CONTROLLA IPOD” o “Controllare il vostro iPod.
- La comunicazione tra questa unità e l’iPod non è
riuscita
t
Eseguire la procedura di undock & re-dock
dell’iPod su questa unità.
- Il vostro iPod non è connesso saldamente.
- Questa unità riconosce l’iPod come dispositivo
sconosciuto.
- La carica del vostro iPod è eccezionalmente
insu ciente.
t
La batteria necessita di carica.
t
Se si carica la batteria quando al carica dell’iPod
è molto bassa, la procedura di ricarica può
richiedere un tempo di ricarica più lungo.
Potete utilizzare l’adattatore che è stato fornito
con il vostro iPod per eseguire la connessione
per uso stabile dell’iPod.
La compatibilità con il vostro iPod può variare
dipendendo dal tipo di iPod.
iPod touch e iPhone hanno una di erenza di
funzionamento rispetto all’iPod. È possibile
che sia necessario un controllo aggiuntivo
per utilizzarli su questa unità. (es. “scorrere per
sbloccare”)
Se si usa un’applicazione, e ettua una telefonata,
o invia e riceve un messaggio di testo SMS, ecc.
su iPod touch o iPhone, staccarlo dall’iPod dock
di questa unità e quindi usarlo.
Dipendendo dalla versione di software del vostro
iPod, è possibile che non sia possibile controllare
il vostro iPod dall’unità. Si raccomanda di
installare la versione software più recente.
La qualità video dipende dalle sorgenti video del
vostro iPod.
Se si hanno problemi con il proprio iPod, visitare
www.apple.com/support/ipod.
HB985-DB.BDEUPPK_ITA.indd 57HB985-DB.BDEUPPK_ITA.indd 57 2010-05-14  2:30:082010-05-14  2:30:08
58
Uso
Uso
4
Funzionamento della
radio
Veri care che l’antenna sia collegata.
(Vedere a pagina 24.)
Ascoltare la RADIO
1. Premere INPUT/TUNER  no (FM) alla
visualizzazione della radio nella  nestra del
display. Viene sintonizzata l’ultima stazione
radio ricevuta.
2. Premere e tenere premuto TUNE (-/+)
per circa due secondi  no a quando
l’indicazione della frequenza non inizia
a modi care. La scansione si interrompe
quando l’unità si sintonizza su una stazione.
Oppure Premere TUNE (-/+) ripetutamente.
3. Regolare il volume girando la manopola
VOLUME posta sul pannello anteriore
oppure premendo VOL (+/-) del
telecomando.
Preimpostazione delle stazioni
radio
È possibile preimpostare 50 stazioni per la FM.
Prima di sintonizzare, assicurarsi di abbassare il
volume.
1. Premere INPUT/TUNER  no alla
visualizzazione di TUNER (FM) nella  nestra
del display.
2. Selezionare la frequenza desiderata tramite
TUNE (-/+).
3.
Premere ENTER ( ) nella  nestrella del
display lampeggia un numero preimpostato.
4. Premere PRESET per selezionare il numero
di preimpostazione desiderato.
5.
Premere ENTER ( ). La stazione viene salvata.
6. Ripetere i passaggi 2 e 5 per memorizzare
ulteriori stazioni.
Elimina tutte le stazioni salvate
Premere e tenere premuto CLEAR per due
secondi. “ERASE ALL inizia lampeggiare. Quindi
tutte le emittenti salvate vengono eliminate.
Migliorare una ricezione FM
scadente
Premere il pulsante colorato D (blu)
(ST/ MONO) del telecomando. Questo passa
il sintonizzatore dalla modalità stereo a quella
mono e di solito migliora la ricezione.
Vedere informazioni relative a
unemittente radio
Il sintonizzatore FM è dotato di un servizio
Radio Data System (RDS). Questo visualizza
informazioni relative alla stazione radio che si
sta ascoltando. Premere RDS ripetutamente
per scorrere i vari tipi di dati:
PS (Nome del programma di servizio)
Il nome del canale viene
visualizzato sul display.
PTY (Riconoscimento del tipo di
programma)
Il tipo di programma (es. Jazz o
News) viene visualizzato sul display.
RT (Radio Text)
Un messaggio di testo che
contiene informazioni speciali
relative alla stazione emittente.
Questo testo può scorrere sullo
schermo.
CT (Ora controllata dal canale)
Questo visualizza data e ora come
trasmessa dalla stazione radio.
HB985-DB.BDEUPPK_ITA.indd 58HB985-DB.BDEUPPK_ITA.indd 58 2010-05-14  2:30:082010-05-14  2:30:08
59
Uso
4
Uso
Riproduzione di
contenuto sulla rete
domestica
Il lettore può sfogliare e riprodurre contenuti
presenti sul vostro PC e server DLNA certi cati
presenti sulla vostra rete domestica.
Informazioni su DLNA
Questo lettore è un lettore di supporti
multimediali digitali certi cato DLNA in grado
di visualizzare e riprodurre video e musica
dai vostri server di supporti multimediali
digitali compatibili DLNA (PC e elettronica di
consumo).
La Digital Living Network Alliance (DLNA) è
unorganizzazione tra industrie di elettronica di
consumo, industria dei computer e aziende di
telefonia cellulare. Digital Living consente una
facile condivisione di supporti digitali su una
rete domestica.
Il logotipo di certi cazione DLNA rende
agevole individuare prodotti conformi alle linee
guida di interoperativià DLNA. Questa unità è
conforme alle linee guida di interoperatività
DLNA v1.5.
Quando un PC con software server DLNA
o altro dispositivo compatibile DLNA viene
connesso è possibile che sia necessario
impostare modi che al software server
software o altri dispositivi. Vedere le istruzioni
del software o dispositivo per ulteriori
informazioni.
Accesso ad un server DLNA
media
1. Controllare la connessione di rete e le
impostazioni (pagine 28-30).
2. Premere
HOME MENU.
3. Selezionare l’opzione [Coll. Home] usando
U
/
u
/
I
/
i
e premere ENTER (
).
4. Selezionare un server DLNA media all’elenco
usando
U
/
u
, e premere ENTER ( ).
Se si desidera eseguire una nuova scansione
dei server di media disponibili, premere il
pulsante verde (B).
NOTA
Dipendendo dal server multimediale questo
lettore può avere la necessità di ottenere prima un
permesso dal server.
5. Selezionare un  le tramite
U
/
u
/
I
/
i
, e
premere ENTER ( ) per riprodurre il  le.
HB985-DB.BDEUPPK_ITA.indd 59HB985-DB.BDEUPPK_ITA.indd 59 2010-05-14  2:30:082010-05-14  2:30:08
60
Uso
Uso
4
NOTA
I requisiti per i  le sono descritti a pagina 11.
È possibile utilizzare diverse funzioni di
riproduzione. Vedere le pagine 40-47.
I requisiti dei  le a pagina 11 non sono sempre
compatibili. Vi possono essere delle limitazioni
delle funzioni dei  le e della capacità del media
server.
Le miniature dei  le non riproducibili possono
essere visualizzate nel menu [Coll. Home] menu,
ma non possono essere riprodotti su questo
lettore.
Se nel menu [Coll. Home] si trova un  le
musicale che non può esser
e riprodotto il lettore
ignora il  le e passa a quello successivo.
Il nome del  le per sottotitoli e nome del  le
video devono essere uguali e trovarsi nella
stessa cartella.
La qualità di riproduzione e funzionamento della
funzione [Coll. Home] può essere in uenzata
dalle condizioni della r
ete domestica.
I  le su supporti rimovibili quali unità USB, unità
DVD ecc. sul media server possono non essere
condivisi in modo corretto.
Accesso alla cartella condivisa
dal PC
1. Avviare il PC che ha connesso la rete locale.
2. Sul PC, le cartelle condivise che contengono
le video, musicali o immagini.
3. Sul lettore controllare la connessione di rete
e le impostazioni (pagine 28-30).
4. Premere
HOME MENU.
5. Selezionare l’opzione [Coll. Home] usando
U
/
u
/
I
/
i
, e premere ENTER (
).
6. Selezionare una cartella condivisa
dall’elenco selezionando
U
/
u
, e premere
ENTER (
).
Se si desidera e ettuare una scansione dei
server multimediali disponibili, premere il
pulsante color verde (B).
NOTA
Dipendendo dalla cartella condivisa, questo lettore
può richiedere l’immissione di un ID utente di rete
e password per accedere alla cartella.
7. Selezionare un  le tramite
U
/
u
/
I
/
i
, e
premere ENTER ( ) per riprodurre il  le.
HB985-DB.BDEUPPK_ITA.indd 60HB985-DB.BDEUPPK_ITA.indd 60 2010-05-14  2:30:092010-05-14  2:30:09
61
Uso
4
Uso
NOTA
I requisiti per i  le sono descritti a pagina 11.
È possibile utilizzare diverse funzioni di
riproduzione. Vedere le pagine 40-47.
Se nel menu [Coll. Home] si trova un  le
musicale che non può essere riprodotto il lettore
ignora il  le e passa a quello successivo.
Se nel menu [Coll. Home] si trova un  le
musicale che non può essere riprodotto il lettore
ignora il  le e passa a quello successivo.
Il nome del  le per sottotitoli e nome del  le
video devono essere uguali e trovarsi nella
stessa cartella.
La qualità di riproduzione e funzionamento della
funzione [Coll. Home] può essere in uenzata
dalle condizioni della rete domestica.
I  le su supporti rimovibili quali unità USB, unità
DVD ecc. sul PC possono non essere condivisi in
modo corretto.
Dipendendo dall’ambiente del PC si possono
veri care problemi di connessione.
Requisiti PC
Windows® XP (Service Pack 2 o superiore),
Windows Vista® (nessun Service Pack
richiesto)
Windows 7®
Processori 1.2 GHz Intel® Pentium® III o AMD
Sempron™ 2200+
Ambiente di rete: 100 Mb Ethernet, WLAN
(IEEE 802.11b/g/n)
NOTA
Se si usa Windows® XP o Windows Vista®, visitare
il collegamento fornito sotto per ulteriori
informazioni relativamente alle impostazioni di
condivisione  le.
HB985-DB.BDEUPPK_ITA.indd 61HB985-DB.BDEUPPK_ITA.indd 61 2010-05-14  2:30:092010-05-14  2:30:09
62
Uso
Uso
4
Inserimento di un ID utente di rete e
password
Dipendendo dall’ambiente del PC è possibile
che sia necessario inserire un ID utente e
password per accedere alla cartella condivisa.
1. Il menu della tastiera viene visualizzato
automaticamente se è richiesto
l’inserimento dell’ID utente e della password
di rete.
2. Utilizzare
U
/
u
/
I
/
i
per selezionare un
carattere, quindi premere ENTER (
) per
confermare la selezione sul menu della
tastiera.
Per inserire una lettera accentata,
selezionare la lettera dal set di caratteri
esteso.
Esempio: selezionare “D” quindi premere
DISPLAY ( ) per visualizzare il set di caratteri
esteso. Utilizzare
I
/
i
per selezionare “D” o
“Ď”, quindi premere ENTER (
).
[Annulla] – Annulla tutti i caratteri inseriti.
[Spazio] – Inserisce uno spazio nella posizione
del cursore.
[<–] – Elimina il carattere precedente nella
posizione del cursore.
[ABC / abc / #+-=&] – Cambia le impostazioni
del menu della tastiera passando alle lettere
maiuscole, minuscole o simboli.
3. Quando si è  nito0 di inserire ID utente e
password di rete, selezionare [OK] tramite
U
/
u
/
I
/
i
e premere ENTER (
) per
accedere alla cartella.
L’ID utente e la password verranno ricordati
dopo l’accesso alla cartella. Se non si
desidera che ID utente e password vengano
ricordati, premere il pulsante colore rosso
(A) per deselezionare la casella [Ricorda]
prima di accedere alla cartella.
HB985-DB.BDEUPPK_ITA.indd 62HB985-DB.BDEUPPK_ITA.indd 62 2010-05-14  2:30:092010-05-14  2:30:09
63
Manutenzione
5
Manutenzione
Note sui dischi
Maneggiamento dei dischi
Non attaccare mai carta o nastro adesivo al
disco.
Conservazione dei dischi
Dopo la riproduzione riporre sempre il disco
nella sua custodia. Non esporre il disco alla luce
diretta del sole o fonti di calore e non lasciare
mai in un’auto posteggiata alla diretta luce del
sole.
Pulizia dei dischi
Non usare solventi quali alcol, benzina,
diluente, detergenti disponibili in commercio o
spray antistatico prodotti per i vecchi dischi di
vinile.
Maneggiamento
dell’unità
Durante la spedizione
Conservare la scatola e materiale di
imballaggio originali. Se si necessita inviare
l’unità, per ottenere la massima protezione,
imballare l’unità come imballata originalmente
di fabbrica.
Per mantenere le super ci esterne pulite vicino
all’unità.
Non usare liquidi volatili quali spray
insetticidi vicino all’unità.
Stro nare con forza può danneggiare la
super cie.
Non lasciare la gomma dei prodotti di
plastica in contatto con l’unità per un
periodo prolungato di tempo.
Pulizia dell’unità
Per pulire l’apparecchio usare un panno
morbido ed asciutto. Se le super ci sono molto
sporche usare un panno morbido leggermente
inumidito con una soluzione detergente dolce.
Non usare solventi aggressivi come alcol,
benzene o diluente poiché questi possono
rovinare la super cie dell’unità.
Manutenzione dell’unità
L’unità è un apparecchio di precisione ad
altissima tecnologia Quando le lenti ottiche del
pick-up e gli elementi del gruppo conduttore
del disco sono sporchi o usurati, la qualità
dell’immagine può essere ridotta. per dettagli,
rivolgersi al centro di assistenza autorizzato più
vicino.
5
Manutenzione
HB985-DB.BDEUPPK_ITA.indd 63HB985-DB.BDEUPPK_ITA.indd 63 2010-05-14  2:30:092010-05-14  2:30:09
64
Risoluzione dei problemi
Risoluzione dei problemi
6
6
Risoluzione dei problemi
Generale
L’;alimentazione non è
inserita.
Inserire il cavo di alimentazione nella presa di rete.
L’unità non avvia la
riproduzione.
Inserire un disco riproducibile. (Controllare il tipo di disco,
sistema colore e codice regionale.)
Disporre il disco con il lato riproduzione volto verso il basso.
Collocare in modo corretto nella guida il disco nel vassoio
portadisco.
Pulire il disco.
Eliminare la funzione di classi cazione o modi care il livello
di classi cazione.
L’angolo non può essere
modi cato.
Le angolature multiple non sono registrate sul video DVD in
riproduzione.
La lingua dei sottotitoli non
può essere modi cata o
disattivata.
I sottotitoli non sono registrati sul video DVD in riproduzione.
Impossibile riprodurre i  le
MP3/WMA/ JPEG/DivX.
I  le non sono stati registrati con un formato supportato
dall’unità.
L’unità non è compatibile con il codec del  le video.
Il telecomando non
funziona in modo corretto
Il telecomando non è puntato al sensore dell’unità.
Il telecomando è troppo lontano dall’unità.
Cè un ostacolo nel percorso tra telecomando e unità.
Le batterie del telecomando sono scariche
HB985-DB.BDEUPPK_ITA.indd 64HB985-DB.BDEUPPK_ITA.indd 64 2010-05-14  2:30:092010-05-14  2:30:09
65
Risoluzione dei problemi
6
Risoluzione dei problemi
Immagine
Nessuna immagine Selezionare sulla TV il modo corretto di ingresso segnale
video in modo da poter visualizzare sullo schermo
l’immagine.
Collegare saldamente il cavo audio.
Controllare l’impostazione colore [Imp. colore HDMI]
nel menu di con gurazione [Impostaz.] è impostata per
l’elemento corretto conforme alla propria connessione video.
È possibile che la vostra TV non supporti la risoluzione di
impostazione del lettore. Modi care la risoluzione su una
supportata dalla TV.
Il jack di uscita HDMI OUT è connesso ad un dispositivo DVI
che non supporta la funzione di protezione del copyright.
Limmagine è molto
disturbata
Si sta riproducendo un disco registrato con un sistema colore
diverso da quello della TV.
Impostare su una risoluzione supportata dalla propria TV.
Suono
L’audio è assente o l’audio
è distorto
L’unità si trova nella modalità di scansione, rallentatore o
pausa.
Il volume audio è basso.
Controllare la connessione dei cavi dell’altoparlante.
(pagina 16)
HB985-DB.BDEUPPK_ITA.indd 65HB985-DB.BDEUPPK_ITA.indd 65 2010-05-14  2:30:092010-05-14  2:30:09
66
Risoluzione dei problemi
Risoluzione dei problemi
6
Network
La funzionalità BD-LIVE
non funziona.
L’unità di archiviazione USB connessa può non avere spazio
su ciente. Connettere un’unità di memorizzazione USB con
almeno 1GB di spazio libero.
Veri care che l’unità sia collegata correttamente alla rete LAN
e che sia possibile accedere a Internet (vedere a pag. 28).
La velocità della connessione a banda larga non è su ciente
per l’uso delle funzioni BD-LIVE. Rivolgersi al proprio provider
di servizi internet (ISP) e si consiglia aumentare la velocità
della banda larga.
Lopzione [Collegamento BD-LIVE] nel menu di
con gurazione [Impostaz.] è impostata [Proibito]. Impostare
l’opzione su [Consentito].
Il design e le speci che tecniche sono soggette a cambiamento senza preavviso.
Aggiornamenti
Le informazioni relative a questo prodotto sono disponibili sul sito Web di Pioneer.
Accedere al sito per le informazioni sull’aggiornamento o sull’assistenza del lettore di dischi Blu-
ray.
HB985-DB.BDEUPPK_ITA.indd 66HB985-DB.BDEUPPK_ITA.indd 66 2010-05-14  2:30:092010-05-14  2:30:09
67
Appendice
7
Appendice
Controllo del
televisore mediante il
telecomando
Potete controllare la PIONEER TV tramite i
pulsanti sotto.
Pulsanti di
omando TV
Pulsante Uso
1
(TV Power)
Spegne/accende la TV
INPUT Alterna la sorgente di
ingresso TV tra il TV e altre
sorgenti di ingresso.
CH +/- Consente di cercare in
su e in giù tra i canali
memorizzati.
VOL +/- Regola il volume del TV.
NOTA
In base all’unità connessa, è probabile non sia
possibile controllare il TV usando alcuni dei
pulsanti.
Con gurare il telecomando per
controllare l’apparecchio TV
È possibile impartire comandi all’apparecchio
TV utilizzando il telecomando in dotazione.
Se il televisore posseduto è tra quelli elencati di
seguito, impostare il relativo codice di fabbrica.
1. Tenendo premuto il tasto
1
(TV POWER),
premere i tasti numerici per inserire il
codice del produttore dell’apparecchio TV
(vedere la tabella sotto riportata).
Produttore
Numero di
codice
Pioneer 1 (Prede nito)
Sony 2, 3
Panasonic 4, 5
Samsung 6, 7
LG 8, 9
2. Rilasciare il tasto
1
(TV POWER) per
completare la con gurazione.
A seconda del modello di apparecchio TV,
alcuni tasti, o anche tutti, potrebbero non
funzionare, anche dopo aver inserito il corretto
codice del produttore.
Dopo aver sostituito le batterie del
telecomando, il numero del codice impostato
potrebbe ricon gurarsi alle impostazioni
prede nite.
Reimpostare il numero codice appropriato.
7
Appendice
HB985-DB.BDEUPPK_ITA.indd 67HB985-DB.BDEUPPK_ITA.indd 67 2010-05-14  2:30:092010-05-14  2:30:09
68
Appendice
Appendice
7
Indicativo località
Selezionare un codice area dall’elenco.
Area Codice Area Codice Area Codice Area Codice
Afghanistan AF
Argentina AR
Australia AU
Austria AT
Belgio BE
Bhutan BT
Bolivia BO
Brasile BR
Cambogia KH
Canada CA
Cile CL
Cina CN
Colombia CO
Congo CG
Costa Rica CR
Croazia HR
Repubblica Ceca CZ
Danimarca DK
Ecuador EC
Egitto EG
El Salvador SV
Etiopia ET
Fiji FJ
Finlandia FI
Francia FR
Germania DE
Gran Bretagna GB
Grecia GR
Groenlandia GL
Hong Kong HK
Ungheria HU
India IN
Indonesia ID
Israele IL
Italia IT
Giamaica JM
Giappone JP
Kenya KE
Kuwait KW
Libia LY
Lussemburgo LU
Malaysia MY
Maldive MV
Messico MX
Monaco MC
Mongolia MN
Morocco MA
Nepal NP
Paesi Bassi NL
Antille Olandesi AN
Nuova Zelanda NZ
Nigeria NG
Norvegia NO
Oman OM
Pakistan PK
Panama PA
Paraguay PY
Filippine PH
Polonia PL
Portogallo PT
Romania RO
Federazione Russa RU
Arabia Saudita SA
Senegal SN
Singapore SG
Repubblica
Slovacca SK
Slovenia SI
Sud Africa ZA
Corea del Sud KR
Spagna ES
Sri Lanka LK
Svezia SE
Svizzera CH
Taiwan TW
Tailandia TH
Turchia TR
Uganda UG
Ucraina UA
Stati Uniti US
Uruguay UY
Uzbekistan UZ
Vietnam VN
Zimbabwe ZW
HB985-DB.BDEUPPK_ITA.indd 68HB985-DB.BDEUPPK_ITA.indd 68 2010-05-14  2:30:092010-05-14  2:30:09
69
Appendice
7
Appendice
Elenco codici lingua
Usare questo elenco per inserire la lingua desiderata per le seguenti impostazioni iniziali:
[Audio Disco], [Sottotitolo Disco], e [Menu Disco].
Lingua Codice Lingua Codice Lingua Codice Lingua Codice
Afar 6565
Afrikaans 6570
Albanese 8381
Ameharic 6577
Arabo 6582
Armeno 7289
Assamese 6583
Aymara 6588
Azerbaigiano 6590
Bashkir 6665
Basco 6985
Bengali, Bangla 6678
Bhutani 6890
Bihari 6672
Bretone 6682
Bulgaro 6671
Birmano 7789
Bielorusso 6669
Cinese 9072
Croato 7282
Ceco 6783
Danese 6865
Olandese 7876
Inglese 6978
Esperanto 6979
Estone 6984
Faroese 7079
Fiji 7074
Finlandese 7073
Francese 7082
Frisone 7089
Galiziano 7176
Georgiano 7565
Tedesco 6869
Greco 6976
Groenlandese 7576
Guarani 7178
Gujarati 7185
Hausa 7265
Ebraico 7387
Hindi 7273
Ungherese 7285
Islandese 7383
Indonesiano 7378
Interlingua 7365
Irlandese 7165
Italiano 7384
Giapponese 7465
Kannada 7578
Kashmiri 7583
Kazako 7575
Kirghiso 7589
Coreano 7579
Curdo 7585
Laothian 7679
Latino 7665
Lettone, Lettish 7686
Lingala 7678
Lituano 7684
Macedone 7775
Malgascio 7771
Malese 7783
Malayalam 7776
Maori 7773
Maratto 7782
Moldavo 7779
Mongolo 7778
Nauru 7865
Nepali 7869
Norvegese 7879
Oriya 7982
Panjabi 8065
Pashto, Pushto 8083
Persiano 7065
Polacco 8076
Portoghese 8084
Quechua 8185
Retoromanzo 8277
Romeno 8279
Russo 8285
Samoano 8377
Sanscrito 8365
Scozzese Gaelico
7168
Serbo 8382
Serbo-Croato 8372
Shona 8378
Sindhi 8368
Cingalese 8373
Slovacco 8375
Sloveno 8376
Spagnolo 6983
Sudanese 8385
Swahili 8387
Svedese 8386
Tagalog 8476
Tajik 8471
Tamilico 8465
Telugu 8469
Tailandese 8472
Tonga 8479
Turco 8482
Turcomanno 8475
Twi 8487
Ucraino 8575
Urdu 8582
Uzbeco 8590
Vietnamese 8673
Volapük 8679
Gallese 6789
Wolof 8779
Xhosa 8872
Yiddish 7473
Yoruba 8979
Zulu 9085
HB985-DB.BDEUPPK_ITA.indd 69HB985-DB.BDEUPPK_ITA.indd 69 2010-05-14  2:30:092010-05-14  2:30:09
70
Appendice
Appendice
7
Risoluzione video di uscita
Quando si riproducono supporti non protetti da copia
Video Out
Risoluzione
HDMI OUT
COMPONENT VIDEO OUT
HDMI connesso HDMI disconnesso
576i (480i) 576p (480i) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 720p
1080i 1080i 1080i
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 1080i
1080p / 50 Hz 1080p / 50 Hz 576i (480i) 1080i
Se si riproducono supporti con protezione dalla copia
Video Out
Risoluzione
HDMI OUT
COMPONENT VIDEO OUT
HDMI connesso HDMI disconnesso
576i (480i) 576p (480p) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 576i (480i) 576p (480p)
1080i 1080i 576i (480i) 576p (480p)
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 576p (480p)
1080p / 50 Hz 1080p / 50 Hz 576i (480i) 576p (480p)
Connessione HDMI OUT
Per l’impostazione di risoluzione 576i (480i),
la risoluzione reale di HDMI OUT passa a
576p (480p).
Se si seleziona una risoluzione
manualmente, quindi si collega il jack HDMI
al TV e il TV non l’accetta, la risoluzione
viene impostata su [Auto].
Se si seleziona una risoluzione che non
viene accettata dall’apparecchio TV viene
visualizzato un messaggio di avvertenza.
Dopo avere modi cato la risoluzione
se non è possibile vedere lo schermo,
attendere 20 secondi e la risoluzione
tornerà automaticamente alla risoluzione
precedente.
La frequenza delle immagini dell’uscita
video 1080p può essere impostata
automaticamente a 24 Hz o 50 Hz in
base alla capacità e alla preferenza del TV
collegato e alla frequenza delle immagini
nativa del contenuto sul disco BD-ROM.
Connessione COMPONENT VIDEO
OUT
BD o DVD possono impedire il passaggio a
valori superiori su uscita analogica.
Connessione VIDEO OUT
La risoluzione della presa VIDEO OUT è sempre
a 576i (480i).
HB985-DB.BDEUPPK_ITA.indd 70HB985-DB.BDEUPPK_ITA.indd 70 2010-05-14  2:30:102010-05-14  2:30:10
71
Appendice
7
Appendice
“Blu-ray Disc” e sono marchi commerciali.
Il lodo “BD-LIVE” è un marchio dell’associazione
Blu-ray Disc.
“BONUSVIEW è un marchio di Blu-ray Disc Association.
Java e tutti i marchi e loghi basati su Java sono
marchi o marchi registrati di Sun Microsystems,
Inc. negli Stati Uniti e in altri paesi.
Fabbricato sotto licenza della Dolby Laboratories.
“Dolby ed il simbolo della doppia D sono marchi
commerciali della Dolby Laboratories.
Prodotto su licenza con brevetto U.S. n: 5.451.942;
5.956.674; 5.974.380; 5.978.762; 6.226.616;
6.487.535; 7.392.195; 7.272.567; 7.333.929;
7.212.872 e altri brevetti U.S. e internazionali
concessi o in attesa di concessione.
DTS e il simbolo sono marchi registrati e DTS-HD,
DTS-HD Master Audio | Essential e i logo DTS sono
marchi di fabbrica di DTS, Inc.
Il prodotto include il software. © DTS, Inc.
Tutti i diritti riservati.
HDMI, il logo HDMI e la High-De nition
Multimedia Interface sono marchi commerciali o
marchi registrati di HDMI Licensing LLC negli USA
e in altri paesi.
Il è un marchio di DVD Format/Logo
Licensing Corporation.
TM
DLNA e DLNA CERTIFIED sono marchi di fabbrica
e/o marchi di servizio di Digital Living Network
Alliance
DivX è un marchio registrato della DivX, Inc., ed è
utilizzato sotto licenza.
“x.v.Color o “x.v.Colour” è un marchio di Sony
Corporation.
Marchi commerciali e licenze
HB985-DB.BDEUPPK_ITA.indd 71HB985-DB.BDEUPPK_ITA.indd 71 2010-05-14  2:30:102010-05-14  2:30:10
72
Appendice
Appendice
7
AVCHD” e il logo AVCHD” sono marchi di
Panasonic Corporation e Sony Corporation.
Questo prodotto è fornito sotto licenza portfolio
del brevetto AVC e VC-1 per uso personale e non
commerciale di un utente per (i) codi care video
in conformità con la norma AVC e VC-1 (“AVC/
VC-1 Video”) e/o (ii) decodi care video AVC/VC-1
codi cato da un utente per uso personale e non
commerciale e/o ottenuto da un fornitore video
con licenza per fornire video AVC/VC-1. Non è
concessa né è implicita alcuna licenza per altri usi.
Ulteriori informazioni possono essere ottenute da
MPEG LA, LLC. Vedere http://www.mpegla.com.
iPod è un marchio commerciale di Apple
Computer, Inc, registrato negli USA ed in altre
nazioni.
iPhone è un marchio di fabbrica di Apple
Computer, Inc.
“Made for iPod” signi ca che un accessorio
elettronico è stato progettato per connettersi
speci camente con un iPod ed è stato certi cato
dallo sviluppatore corrispondente agli standard di
rendimento previsti da Apple.
Works with iPhone signi ca che un accessorio
elettronico è stato progettato per connettersi
speci camente con un iPhone ed è stato
certi cato dallo sviluppatore corrispondente agli
standard di rendimento previsti da Apple.
Apple non è responsabile per il
funzionamento di questo dispositivo o per
la sua conformità agli standard normativi e
regolamentari di sicurezza.
Windows Media è un marchio registrato o un
marchio di fabbrica di Microsoft Corporation negli
Stati Uniti e/o negli altri paesi.
Il prodotto include sistemi di proprietà di Microsoft
Corporation e non può essere utilizzato o distribuito
senza una licenza di Microsoft Licensing, Inc.
®
Le tecnologia wireless Bluetooth® permette di
collegare tra loro dispositivi elettronici in un intervallo
massimo di 10 metri.
Il collegamento di singoli dispositivi tramite la
tecnologia Bluetooth non comporta alcun costo.
Un telefono cellulare dotato di tecnologia wireless
Bluetooth può essere adoperato tramite il Cascade se
la connessione è e ettuata con Bluetooth.
Il nome e i logo Bluetooth sono di proprietà di
Bluetooth SIG, Inc; qualsiasi utilizzo di tali marchi da
parte di Pioneer Corporation è soggetto a licenza. Altri
marchi registrati e nomi commerciali appartengono
ai rispettivi proprietari.
HB985-DB.BDEUPPK_ITA.indd 72HB985-DB.BDEUPPK_ITA.indd 72 2010-05-14  2:30:102010-05-14  2:30:10
73
Appendice
7
Appendice
Speci che tecniche
Generale
Requisiti di alimentazione:
AC 220-240 V, 50/ 60 Hz
• Consumo elettrico:
150 W
Nella modalità Standby: meno di 0,5 W
Dimensioni (L x A x P):
Circa 430 × 64 × 304 mm
Peso netto (approssimativo):
3,6 kg
Temperatura di esercizio da:
41 °F a 95 °F (5 °C a 35 °C)
Umidità di esercizio:
5 % a 90 %
Alimentazione tensione bus (USB):
DC 5 V
500 mA
Ingressi/ Uscite
• VIDEO OUT:
1,0 V (p-p), 75 , sinc negativo, jack RCA x 1
• COMPONENT VIDEO OUT:
(Y) 1,0 V (p-p), 75 Ω, sinc. negativo, RCA jack x 1
(Pb)/(Pr) 0,7 V (p-p), 75 Ω, RCA jack x 2
HDMI OUT (video/audio):
19 pin (HDMI standard, Tipo A, Versione 1.3)
Analogue AUDIO IN:
2,0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DIGITAL IN (OPTICAL 1/2):
3 V (p-p), jack ottico x 2
• PORTABLE IN:
0,5 Vrms (3,5 mm stereo jack)
Sintonizzatore
Campo di sintonizzazione FM:
87.5 a 108.0 MHz o 87.50 a 108.00 MHz
Ampli catore
Uscita di potenza, (PEAK), (4/3)
Totale 1100 W
Anteriore 180 W x 2
Centro 180 W
Vista posteriore 180 W x 2
Subwoofer 200 W (Passive)
Uscita di potenza, (RMS), THD 10% (4/3)
Totale 930 W
Anteriore 150 W x 2
Centro 150 W
Vista posteriore 150 W x 2
Subwoofer 180 W (Passive)
Sistema
• Laser:
laser semiconduttore,
Lunghezza d’onda: 405 nm / 650 nm
• Sistema segnale:
Sistema colore TV NTSC/PAL standard
Risposta in frequenza:
da 20 Hz a 20 kHz (campionamento 48 kHz,
96 kHz, 192 kHz)
• Porta LAN:
Jack Ethernet x 1, 10BASE-T/100BASE-TX
HB985-DB.BDEUPPK_ITA.indd 73HB985-DB.BDEUPPK_ITA.indd 73 2010-05-14  2:30:102010-05-14  2:30:10
74
Appendice
Appendice
7
Altoparlanti
BCS-707
S-BD707
Cassa anteriore/surround (sinistra/destra)
Tipo: 2 vie
Impedenza nominale: 4 
Dimensioni nette 260 x 1097 x 260 mm
(L x H x P):
Peso netto: 3,8 kg
• Di usore centrale
Tipo: 1 vie
Impedenza nominale: 4 
Dimensioni nette 300 x 87x 65 mm
(L x H x P):
Peso netto: 0,6 kg
S-BD707SW
• Subwoofer
Tipo: 1 vie 1 altoparlante
Impedenza nominale: 3 
Dimensioni nette 130.5 x 420 x 375 mm
(L x H x P):
Peso netto: 4,4 kg
Altoparlanti
BCS-303
S-BD303
Cassa anteriore/surround (sinistra/destra)
Tipo: 1 vie
Impedenza nominale: 4 
Dimensioni nette 96 x 96 x 85 mm
(L x H x P):
Peso netto: 0,4 kg
• Di usore centrale
Tipo: 1 vie
Impedenza nominale: 4 
Dimensioni nette 300 x 87 x 65 mm
(L x H x P):
Peso netto: 0,6 kg
• Subwoofer
Tipo: 1 vie 1 altoparlante
Impedenza nominale: 3 
Dimensioni nette 130.5 x 420 x 375 mm
(L x H x P):
Peso netto: 4,4 kg
HB985-DB.BDEUPPK_ITA.indd 74HB985-DB.BDEUPPK_ITA.indd 74 2010-05-14  2:30:102010-05-14  2:30:10
75
Appendice
7
Appendice
Avviso per il software
Open source
I seguenti eseguibili GPL e librerie LGPL usati in
questo prodotto sono soggetti agli accordi di licenza
GPL2.0/LGPL2.1:
ESEGUIBILI GPL: Linux kernel 2.6, bash, busybox,
cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils,
net-tools, procps, samba-3.0.25b, sysutils, tcpdump,
tftpd, tinylogin, unzip, utelnetd
LIBRERIE LGPL: uClibc, DirectFB, blow sh, cairo,
mpeg, iconv, libusb, mpg123
gSOAP Licenza pubblica 1.3 LIBRERIA: gsoap
Una copia del corrispondente codice sorgente può
essere ottenuta pagando le spese di distribuzione.
Per ottenere una copia, contattare l’Assistenza clienti
locale Pioneer.
Potete ottenere una copia delle licenze di GPL,
LGPL da http://www.gnu.org/licenses/old-licenses/
gpl-2.0.html e http://www.gnu.org/licenses/old-
licenses/lgpl-2.1.html.
Inoltre potete ottenere una copia della
licenza pubblica gSOAP da http://www.cs.fsu.
edu/~engelen/license.html.
Questo software è basato in parte sul lavoro del
Independent JPEG Group diritti di riproduzione ©
1991 – 1998, Thomas G. Lane.
Questo prodotto include:
boost C++: diritti di riproduzione © Beman Dawes
1999-2003
c-ares : diritti di riproduzione © 1998 del
Massachusetts Institute of Technology
curl: diritti di riproduzione © 1996 - 2008, Daniel
Stenberg
expat: diritti di riproduzione © 2006 manutentori
expat
freetype: diritti di riproduzione © 2003 The
FreeType Project (www.freetype.org).
jpeg: Questo software è basato in parte sul
lavoro del Independent JPEG Group diritti di
riproduzione © 1991 – 1998, Thomas G. Lane.
mng: diritti di riproduzione © 2000-2007 Gerard
Juyn, Glenn Randers-Pehrson
ntp: diritti di riproduzione © David L. Mills 1992-
2006
• OpenSSL:
software di crittogra a scritto da Eric Young
(eay@cryptsoft.com).
software scritto da Tim Hudson
(tjh@cryptsoft.com).
software sviluppato dal OpenSSL Project per
l’uso con il tool kit OpenSSL.
(http://www.openssl.org)
png: diritti di riproduzione © 2004 Glenn Randers-
Pehrson
portmap: diritti di riproduzione © 1990 The Regents
of the University of California
ptmalloc: diritti di riproduzione © 2001-2006 Wolfram
Gloger
nitTest++ : diritti di riproduzione © 2006 Noel Llopis
and Charles Nicholson
UPnP SDK : Diritti di riproduzione (c) 2000-2003 Intel
Corporation
• strace :
diritti di riproduzione © 1991, 1992 Paul Kranenburg
diritti di riproduzione © 1993 Branko Lankester
diritti di riproduzione © 1993 Ulrich Pegelow
diritti di riproduzione © 1995, 1996 Michael Elizabeth
Chastain
diritti di riproduzione © 1993, 1994, 1995, 1996 Rick
Sladkey
diritti di riproduzione © 1999, 2000 Wichert Akkerman
xml2: diritti di riproduzione (C) 1998-2003 Daniel
Veillard.
XML-RPC For C/C++:
diritti di riproduzione © 2001 di First Peer, Inc. Tutti i
diritti sono riservati.
diritti di riproduzione © 2001 di Eric Kidd. Tutti i diritti
sono riservati.
zlib : diritti di riproduzione (c) 1995-2002 Jean-loup
Gailly e Mark Adler.
Tutti diritti sono riservati.
Viene di seguito concessa autorizzazione,
gratuitamente, a chiunque ottenga una copia del
presente software e dei  le della documentazione
associata (il “Software”), a operare con il Software
senza limitazione,compresi senza limitazione i diritti
di utilizzare, copiare, modi care, unire, pubblicare,
distribuire, concedere in sublicenza e/o vendere
copie del Software, e di concedere alle persone a cui
il Software è fornito tale autorizzazione, soggetta alle
condizioni seguenti:
IL SOFTWARE VIENE FORNITO COME È, SENZA
GARANZIA DI ALCUN TIPO, ESPRESSA O IMPLICITA,
INCLUSE MA NON LIMITATE ALLE GARANZIE DI
COMMERCIABILITÀ, IDONEITÀ PER UNO SCOPO
PARTICOLARE E NON VIOLAZIONE. IN NESSUN CASO
GLI AUTORI O I DETENTORI DEL COPYRIGHT SONO
RESPONSABILI PER RIVENDICAZIONI, DANNI O ALTRA
RESPONSABILITÀ, IN AZIONE CONTRATTUALE, TORTO
O ALTRO, DERIVANTE DA O CONGIUNTAMENTE AL
SOFTWARE O ALL’UTILIZZO O ALTRI RAPPORTI CON
IL SOFTWARE.
HB985-DB.BDEUPPK_ITA.indd 75HB985-DB.BDEUPPK_ITA.indd 75 2010-05-14  2:30:112010-05-14  2:30:11
2 Información de seguridad
Información de seguridad
1
ADVERTENCIA
RIESGO DE DESCARGA
ELÉCTRICA NO ABRIR
ADVERTENCIA: PARA REDUCIR EL RIESGO DE
DESCARGA ELÉCTRICA NO EXTRAIGA LA CUBIERTA
(O PARTE POSTERIOR). NO HAY EN EL INTERIOR
NINGUNA PARTE QUE PUEDA REEMPLAZAR
EL USUARIO. PARA CUALQUIER REPARACIÓN
CONTACTE CON PERSONAL DE MANTENIMIENTO
CUALIFICADO.
Este símbolo de un relámpago
con cabeza de  echa dentro
de un triángulo equilátero está
destinado para alertar al usuario
de la presencia de una potencia
no aislada peligrosa dentro del
producto que puede ser de la
magnitud su ciente como para
constituir un riesgo de descarga
eléctrica a las personas.
El signo de exclamación dentro
de un triángulo equilátero está
destinado para alertar al usuario
de la presencia de instrucciones de
mantenimiento y funcionamiento
en la documentación que
acompaña al producto.
Precauciones y advertencias
ADVERTENCIA: PARA REDUCIR EL RIESGO DE
INCENDIO O DESCARGA ELÉCTRICA, NO EXPONGA
ESTE PRODUCTO A LA LLUVIA NI A LA HUMEDAD.
ADVERTENCIA: No instale el equipo en un espacio
cerrado, como en una estantería o mueble similar.
PRECAUCIÓN: No obstruya ninguno de los ori cios
de ventilación. Instalar conforme a las instrucciones
del fabricante.
Las ranuras y ori cios de la carcasa cumplen un
propósito de ventilación y aseguran el correcto
funcionamiento del producto, y lo protegen de un
posible sobrecalentamiento. Los ori cios no deben
obstruirse en ningún caso colocando el producto
sobre una cama, sofá, alfombra o super cie similar.
Este producto no debe colocarse en una instalación
empotrada, como una librería o estante, a menos
que se proporcione una correcta ventilación del
mismo y se respeten todas las instrucciones del
fabricante.
PRECAUCIÓN: Éste es un producto láser clase
I, clasi cado conforme a la norma CEI 60825-
1:2007 sobre seguridad de los productos láser.
Para asegurar un uso apropiado de este producto,
lea cuidadosamente este manual del propietario
y consérvelo para futuras consultas. Si la unidad
necesitara de mantenimiento, póngase en contacto
con un centro de servicio autorizado.
El uso de controles, ajustes o procedimientos
diferentes a los especi cados aquí puede provocar
una exposición peligrosa a la radiación.
Para prevenir la exposición directa al rayo láser, no
intente abrir el cerramiento. Radiación visible del
láser al abrirlo. NO FIJE LA VISTA EN EL LÁSER O HAZ
DE LUZ.
1
Información de seguridad
HB985-DB.BDEUPPK_SPA.indd 2HB985-DB.BDEUPPK_SPA.indd 2 2010-05-14  2:48:222010-05-14  2:48:22
Información de seguridad
3Información de seguridad
1
PRECAUCIÓN referente al cable de alimentación
Para la mayor parte los aparatos eléctricos, se
recomienda su conexión en un circuito dedicado.
es decir, un circuito de un sólo enchufe que acciona
solamente este aparato y no tiene enchufes o
circuitos derivados adicionales. Revise la página
de especi caciones de este manual de usuario
para asegurarse. No sobrecargue los enchufes
de pared. Los enchufes de pared sobrecargados,
ojos o dañados, cables de extensión, cables de
alimentación pelados, o el aislamiento dañado
o agrietado del cable son elementos peligrosos.
Cualquiera de estas condiciones podría dar
lugar a descargas eléctricas o fuego. Examine
periódicamente el cable de su electrodoméstico, y si
su aspecto indica daños o deterioro, desenchúfelo,
cese el uso del electrodoméstico, y haga cambiar
el cable por una pieza de recambio exacta por un
distribuidor de servicio autorizado. Proteja el cable
de alimentación de daños físicos o mecánicos y evite
doblarlo, aplastarlo, pellizcarlo o pisarlo con una
puerta o caminar sobre él. Preste especial atención
a los enchufes, tomas de pared, y al punto donde el
cable sale del electrodoméstico. Para desconectar
la alimentación principal, retire el cable principal de
alimentación. Durante la instalación del producto,
asegúrese de que el enchufe sea fácilmente
accesible.
PIONEER declara por este documento
que este/estos producto(s) cumplen con
los requisitos esenciales y las demás
provisiones de la Directiva 2004/108/
EC, 2006/95/EC y 2009/125/EC.
ADVERTENCIA: para evitar el peligro de incendio,
no coloque ninguna llama abierta (por ejemplo, una
vela encendida) sobre el aparato.
Este dispositivo está provisto de una batería o
acumulador portátil.
Forma segura de extraer la pila o el acumulador
del equipo: Retire la pila o juego de pilas usadas y
siga los pasos en orden inverso a su colocación. Para
impedir la contaminación del medioambiente o los
posibles efectos adversos en la salud de humanos
y animales, coloque la pila usada o el acumulador
en el contenedor apropiado de los puntos de
recogida designados para tal  n. No elimine las pilas
o el acumulador junto con la basura doméstica. Se
recomienda utilizar pilas y acumuladores con sistema
de reembolso gratuito en su localidad. No exponga
las pilas al calor intenso intenso, como la luz del sol,
un incendio o similar.
PRECAUCIÓN: El aparato no debe exponerse al
agua (goteo o salpicaduras) y no debe colocar sobre
el aparato objetos llenos de líquidos, como  oreros.
HB985-DB.BDEUPPK_SPA.indd 3HB985-DB.BDEUPPK_SPA.indd 3 2010-05-14  2:48:252010-05-14  2:48:25
4 Información de seguridad
Información de seguridad
1
Información para los usuarios sobre la recogida y
eliminación de equipos usados y pilas agotadas.
Estos símbolos en los productos, embalajes o
documentación que los acompaña signi can que los
productos eléctricos y electrónicos usados y las pilas
agotadas no deberán mezclarse con los residuos
domésticos.
Para un correcto tratamiento, recuperación y reciclaje
de los productos y pilas usados, llévelos a los puntos
de recogida correspondientes, en cumplimiento con
la legislación nacional vigente.
Si elimina estos productos y sus pilas de forma
correcta, estará ayudando a conservar importantes
recursos y evitar cualquier efecto negativo sobre
la salud humana y el medio ambiente que, de otro
modo, podría producirse como resultado de una
gestión incorrecta de los residuos.
Para más información acerca de la recogida y
reciclaje de producto y pilas usados, póngase
en contacto con su ayuntamiento, el servicio de
recogida de residuos o el punto de venta donde
haya adquirido los productos.
Estos símbolos sólo tienen validez en la Unión
Europea.
Para países fuera de la Unión Europea:
Si desea eliminar estos productos, póngase en
contacto con las autoridades locales o su distribuidor
y solicite información acerca del método de
eliminación correcto.
Notas sobre el copyright
Dado que el sistema AACS (Sistema de contenido
de acceso avanzado) está aprobado como sistema
de protección contenido para formato BD, similar
al uso del sistema CSS (Sistema de cifrado de
contenido) para formato DVD, se aplican ciertas
restricciones a la reproducción, la salida de
señales analógicas, etc.. de contenido protegido
por AACS. El manejo de este producto y las
restricciones impuestas sobre él pueden variar
dependiendo del momento de la compra, ya que
esas restricciones pueden haberse adoptado y/
o modi cado por AACS después de la fabricación
de este producto.
Además, la marca BD-ROM y BD+ también se
utilizan como sistema de protección de contenido
en el formato BD, que impone ciertas restricciones
incluidas las de reproducción en los contenidos
protegidos de la marca BD-ROM y/o BD+. Para
obtener información adicional sobre AACS, la
marca BD-ROM, BD+, o su producto, póngase en
contacto con un Centro de Atención al cliente
autorizado.
Muchos discos BD-ROM/DVD están codi cados
con protección anticopia. Por ello, debe conectar
el reproductor directamente al televisor, no a un
vídeo. Si conecta el reproductor a un vídeo, los
discos con protección anticopia emitirán una
imagen distorsionada.
Este producto incorpora tecnología de protección
de derechos de autor amparada mediante
patentes de EE.UU. y otras leyes de propiedad
intelectual. La utilización de esta tecnología
de protección de derechos de autor debe
estar autorizada por Rovi, estando dirigida
exclusivamente al uso doméstico y otros medios
de visualización limitados, salvo autorización
contraria de Rovi. Está prohibida la alteración o
desmontaje de dicha tecnología.
Bajo las leyes de Propiedad Intelectual de EE.UU.
y otros países, la grabación, uso, visualización,
distribución o revisión no autorizada de
programas de televisión, cintas de video, discos
BD-ROM, DVD, CD y otros materiales puede estar
sujeta a responsabilidad civil o criminal.
Pb
(
Símbolo para
pilas y baterías
)
HB985-DB.BDEUPPK_SPA.indd 4HB985-DB.BDEUPPK_SPA.indd 4 2010-05-14  2:48:252010-05-14  2:48:25
Información de seguridad
5Información de seguridad
1
Aviso importante para los sistemas de color del
televisor
El sistema de color de este reproductor varía en
función de los discos que se están reproduciendo en
ese momento.
Por ejemplo, cuando la unidad reproduce un disco
grabado en el sistema de color NTSC, la imagen se
emite como una señal NTSC.
El sistema multicolor del televisor es el único que
puede recibir todas las señales emitidas por el
reproductor.
Si tiene un televisor con un sistema de color
PAL, sólo se mostrarán imágenes distorsionadas
cuando utilice discos o contenido de vídeo
grabado en NTSC.
El televisor con sistema multicolor cambia el
sistema de color de forma automática según las
señales de entrada.
En caso de que el sistema de color no se cambie
automáticamente, desactívelo y actívelo de nuevo
para ver imágenes normales en pantalla.
Incluso si los discos grabados en el sistema de
color NTSC se muestran bien en su televisor
puede que no se graben correctamente en su
grabadora.
HB985-DB.BDEUPPK_SPA.indd 5HB985-DB.BDEUPPK_SPA.indd 5 2010-05-14  2:48:262010-05-14  2:48:26
6
Índice
1
Información de seguridad
2 Precauciones y advertencias
2
Preparación
8 Introducción
8 El símbolo en pantalla
8 Símbolos utilizados en este
manual
9 Accesorios suministrados
10 Discos reproducibles
11 Compatibilidad de archivos
12 Código de región
12 AVCHD (Códec de video
avanzado de alta de nición)
12 Algunos requisitos del
sistema
12 Notas sobre la compatibilidad
13 Mando a distancia
14 Panel delantero
15 Parte posterior
3
Instalación
16 Monte los altavoces
16 Con guración de los
altavoces BCS-707
18 Con guración de los
altavoces BCS-303
19 Montaje mural del altavoz central
19 Notas adicionales sobre la colocación
20 Ubicación del sistema
21 Conexiones a su TV
21 Conexión HDMI
22 Conexión de vídeo
componente
23 Conexión del vídeo
23 Ajuste de la resolución
24 Conexión de la antena
24 Conexiones con un dispositivo
externo
24 Conexión auxiliar
25 Conexión a entrada de
puerto
25 Conexión a entrada óptica
1/2
26 Conexión Bluetooth®
28 Conexión a la red doméstica
29 Con guración de la red
31 Conexión de dispositivos USB
32 Ajustes
32 Ajuste de los valores de
con guración
33 Menú [PANTALLA]
34 Menú [IDIOMA]
35 Menú [AUDIO]
36 Menú [BLOQUEO]
37 Menú [RED]
37 Menú [OTROS]
39 Efecto de sonido
HB985-DB.BDEUPPK_SPA.indd 6HB985-DB.BDEUPPK_SPA.indd 6 2010-05-14  2:48:262010-05-14  2:48:26
7
1
2
3
4
5
6
7
8
4
Funcionamiento
40 Reproducción general
42 Reproducción avanzada
44 Visualización en pantalla
48 Disfrutar de BD-LIVE
49 Reproducción de archivos de vídeo y
discos VR
51 Ver una fotografía
53 Escuchar música
56 Reproducción de iPod
58 Funcionamiento de la radio
59 Reproducción de contenidos a través
de la red doméstica
5
Mantenimiento
63 Notas en los discos
63 Manejo de la unidad
6
Resolución de problemas
64 General
65 Imagen
65 Sonido
66 Red
7
Apéndice
67 Control de un televisor con el mando
a distancia suministrado
68 Lista del código del país
69 Lista de código de idioma
70 Resolución de la salida de vídeo
71 Marcas comerciales y licencias
73 Datos técnicos
75 Aviso sobre el software de código
abierto
HB985-DB.BDEUPPK_SPA.indd 7HB985-DB.BDEUPPK_SPA.indd 7 2010-05-14  2:48:262010-05-14  2:48:26
8 Preparación
Preparación
2
2
Preparación
Introducción
El símbolo en pantalla
El símbolo puede aparecer en la pantalla de
su televisor durante su manejo e indica que la
función explicada en este manual del usuario
no está disponible en ese el aparato.
Símbolos utilizados en este
manual
NOTA
Indica la existencia de notas y características
de funcionamiento particulares.
PRECAUCIÓN
Indica precauciones que se deben tomar para
evitar posibles daños debido a un mal uso.
Un apartado cuyo título contenga uno de los
siguientes símbolos es aplicable sólo al disco
representado por el símbolo.
BD
Disco BD-ROM
DVD
Los discos DVD-Vídeo,
DVD±R/RW en modo
Vídeo o modo VR están
nalizados
AVCHD
Discos DVD±R/RW en
formato AVCHD
ACD
CD de audio
MOVIE
Archivos de vídeo
MUSIC
Archivos de música
PHOTO
Archivos de fotos
HB985-DB.BDEUPPK_SPA.indd 8HB985-DB.BDEUPPK_SPA.indd 8 2010-05-14  2:48:262010-05-14  2:48:26
9Preparación
2
Preparación
Accesorios suministrados
Cable de vídeo (1) Mando a distancia (1)
Pilas (1) Antena FM (1)
Cradle para iPod (1)
Accesorios y cajas de altavoces
(S-BD707T)
Cables para los
altavoces (5)
Tornillos (12)
Bases de soporte
para los altavoces (4)
Apoyos pequeños
antideslizantes (1)
Apoyos intermedios
antideslizantes (1)
Accesorios y cajas de altavoces
(S-BD707SW)
Cables para los
altavoces (1)
Apoyos grandes
antideslizantes (4)
Accesorios y cajas de altavoces
(S-BD303)
Cables para los
altavoces (6)
Apoyos pequeños
antideslizantes (1)
Apoyos grandes
antideslizantes (1)
HB985-DB.BDEUPPK_SPA.indd 9HB985-DB.BDEUPPK_SPA.indd 9 2010-05-14  2:48:262010-05-14  2:48:26
10 Preparación
Preparación
2
Discos reproducibles
Disco Blu-ray
- Discos de películas que
puedan comprarse o alquilarse.
- Discos BD-R/RE que contienen
archivos con películas, música
o fotografías.
DVD-VIDEO
disco 8 / 12 cm
Discos de películas que puedan
comprarse o alquilarse.
DVD±R
disco
8 / 12 cm
- Sólo modo vídeo y  nalizado
- También admite discos de
doble capa
- Formato AVCHD  nalizado
- Discos DVD±R que contienen
archivos con películas, música
o fotografías.
DVD-RW
disco
8 / 12 cm
- Modo VR, Modo Vídeo y
nalizado solamente
- Formato AVCHD  nalizado
- Discos DVD-RW que contienen
archivos con películas, música
o fotografías.
DVD+RW
disco
8 / 12 cm
- Sólo modo vídeo y  nalizado
- Formato AVCHD
- Formato AVCHD  nalizado
- Discos DVD+RW que
contienen archivos con
películas, música o fotografías.
Audio CD
disco
8 / 12 cm
CD-R/RW
disco 8 / 12 cm
- Discos CD-R/RW que
contienen títulos de audio,
archivos de vídeo, música o
fotos.
NOTA
Algunos discos CD-R/RW (o DVD±R/RW) no
podrán reproducirse en la unidad debido a las
condiciones del equipo de grabación o a los
propios discos CD-R/RW (o DVD±R/RW).
Dependiendo de la  nalización y del software de
grabación, algunos discos grabados (CD-R/RW,
DVD±R/RW o BD-R/RE) podrían no reproducirse.
Puede que no se reproduzcan los discos
CD-R/RW y BD-R/RE, DVD±R/RW grabados con
un ordenador personal o una grabadora de DVD
o CD si el disco está dañado o sucio, o si hay
suciedad o restos de condensación en la lente
de la unidad.
Si graba un disco con un ordenador, incluso si
lo hace en un formato compatible, hay casos
en los que no se puede reproducir debido a
los ajustes del programa usado para crear el
disco. (Consulte al editor del programa para más
información).
El reproductor requiere discos y grabaciones que
cumplan ciertas normas técnicas para obtener
una calidad de reproducción óptima.
Los DVD previamente grabados se ajustan
automáticamente a estas normas. Existen
muchos tipos diferentes de formatos de
disco gravables (incluido CD-R con archivos
MP3 o WMA) que exigen ciertas condiciones
preexistentes para garantizar una reproducción
compatible.
Los clientes deben tener en cuenta que
es necesario tener un permiso para poder
descargarse archivos MP3/WMA y música de
Internet. Nuestra empresa no está autorizada
para conceder ese permiso. El permiso deberá
solicitarse siempre al propietario de los derechos
de autor.
HB985-DB.BDEUPPK_SPA.indd 10HB985-DB.BDEUPPK_SPA.indd 10 2010-05-14  2:48:272010-05-14  2:48:27
11Preparación
2
Preparación
Compatibilidad de archivos
General
Extensiones de archivo disponibles:
.jpg”, “.jpeg”, “.png”, “.avi”, “.divx, “.mpg”, “.mpeg”,
.mkv, “.mp4”, “.mp3”, “.wma, “.wav
Las extensiones de archivo que hay disponibles
variarán según los servidores DLNA.
Algunos archivos ”.wav no so con este
reproductor.
El número máximo de caracteres para el
nombre de archivo es 180.
Puede que tarde varios minutos en leer el
contenido del soporte dependiendo del
tamaño y el número de archivos.
Número máximo de archivos/carpetas:
Menos de 2 000 (número total de archivos y
carpetas)
Formato CD-R/RW, DVD±R/RW, BD-R/RE:
ISO 9 660+JOLIET, UDF y formato UDF Bridge
PELÍCULA
Resolución disponible:
Píxeles de 1 920 x 1 080 (An. x Alt.)
Subtítulos que se pueden reproducir:
SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha
(.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub),
SubViewer 1,0 (.sub), SubViewer 2,0 (.sub/.txt),
TMPlayer (.txt), DVD Subtitle System (.txt)
VobSub (.sub) no está disponible en la
función [Enlace principal].
Formato de codec reproducible: “DIVX3.xx”,
“DIVX4.xx, “DIVX5.xx, “XVID”, “DIVX6.xx
(sólo para reproducción estándar), H.264/
MPEG-4 AVC, MPEG1 SS, MPEG2 PS, MPEG2 TS
Formato de audio reproducible: “Dolby
Digital”, “DTS”, “MP3”, “WMA, “AAC”, “AC3”
No todos los formatos de audio WMA y AAC
son compatibles con esta unidad.
Frecuencia de muestreo:
entre 32 kHz y 48 kHz (WMA),
entre 16 kHz y 48 kHz (MP3)
Velocidad de bits:
entre 20 kbps y 320 kbps (WMA)
entre 32 kbps y 320 kbps (MP3)
NOTA
Los archivos de película HD contenidos en
el CD o USB 1,0/1,1 podrían no reproducirse
correctamente. Se recomienda usar los sistemas
BD, DVD o USB 2,0 para reproducir archivos de
película en HD.
Este reproductor admite H.264/MPEG-4 AVC de
per l principal y alto en Level 4,1. Para archivos
con un nivel superior, aparecerá en pantalla un
mensaje de advertencia.
Este reproductor no admite archivos que se
graban con GMC*1 o Qpel*2. Éstas son las
denominadas técnicas de codi cación de vídeo
en el estándar MPEG4, como DivX o XviD.
*1 GMC – Compensación global del movimiento
*2 Qpel – Cuarto de píxel
MÚSICA
Frecuencia de muestreo:
entre 8 y 48 KHz (WMA),
entre 11 y 48 KHz (MP3)
Velocidad de lectura:
entre 8 y 320 kbps (WMA, MP3),
NOTA
Esta unidad no admite archivos MP3 con
etiquetas ID3.
El tiempo de reproducción total indicado en la
pantalla puede no ser correcto para archivos
VBR.
FOTOGRAFÍAS
Tamaño recomendado:
Inferior a 4 000 x 3 000 x 24 bit/píxeles
Inferior a 3 000 x 3 000 x 32 bit/píxeles
Inferior a 4 MByte/ le
No es compatible con archivos de imagen
progresivos y sin pérdida de compresión.
HB985-DB.BDEUPPK_SPA.indd 11HB985-DB.BDEUPPK_SPA.indd 11 2010-05-14  2:48:272010-05-14  2:48:27
12 Preparación
Preparación
2
Código de región
El código de región se encuentra impreso en la
parte posterior de esta unidad. Esta unidad sólo
puede leer discos BD-ROM o DVD cali cados
como la parte posterior de la unidad o Todos”.
AVCHD (Códec de video
avanzado de alta de nición)
Este reproductor puede reproducir discos
en formato AVCHD. Estos discos se graban y
usan normalmente en videocámaras.
El formato AVCHD es un formato de cámara
de vídeo digital de alta de nición.
El formato MPEG-4 AVC/H.264 es capaz
de comprimir imágenes con una e cacia
mayor que el formato de compresión de
imagen convencional.
Algunos discos AVCHD usan el formato
“x.v.Colour.
Este reproductor puede reproducir discos
AVCHD usando el formato “x.v.Colour.
Algunos discos en formato AVCHD podrían
no reproducirse dependiendo de las
condiciones de la grabación.
Los discos en formato AVCHD deben estar
nalizados.
“x.v.Colour” ofrece una mayor gama de
colores que los discos DVD normales de
videocámara.
Algunos requisitos del sistema
Para reproducción de vídeo de alta de nición:
Visualización de alta de nición con tomas
de entrada COMPONENT o HDMI.
Disco BD-ROM con contenido en alta
de nición.
Es necesario que el dispositivo de pantalla
disponga de una entrada DVI apta para
HDMI o HDCP para mostrar algunos
contenidos (como indican los autores del
disco).
Para realizar una conversión de un DVD
con de nición estándar, es necesario que
el dispositivo de pantalla disponga de una
entrada DVI apta para HDMI o HDCP para
contenido con protección anticopia.
Notas sobre la compatibilidad
Dado que BD-ROM es un nuevo formato,
pueden aparecer algunos problemas de
discos, conexión digital y otros problemas
de compatibilidad. Si tiene problemas de
compatibilidad, póngase en contacto con
un Centro de servicio técnico autorizado.
Para visualizar contenidos de alta de nición
y convertir contenido estándar de DVD
a una resolución mayor, es posible que
el dispositivo de pantalla deba tener una
entrada apta para HDMI o una entrada DVI
apta para HDCP.
Algunos discos BD-ROM y DVD pueden
restringir el uso de algunos comandos
operación o algunas funciones.
Puede utilizar un dispositivo USB para
almacenar información relacionada con el
disco, incluso contenido descargado en
línea. El disco que está utilizando controlará
el tiempo que se retiene esta información.
HB985-DB.BDEUPPK_SPA.indd 12HB985-DB.BDEUPPK_SPA.indd 12 2010-05-14  2:48:282010-05-14  2:48:28
13Preparación
2
Preparación
Mando a distancia
1
2
3
• • • • • • • • •
a
• • • • • • • • •
1
(STANDBY/ON): Apaga y
enciende el reproductor.
Z
OPEN/CLOSE: Abre o cierra la
bandeja del disco.
INPUT/TUNER: Cambia el modo
de entrada.
BT AUDIO: Cambia el modo de
entrada a BT AUDIO directamente.
OPTICAL: Cambia el modo de
entrada directamente a óptico.
DISPLAY: Muestra o sale de la
pantalla del menú OSD.
HOME MENU: Muestra o sale
del [MENÚ INICIO].
MENU: Accede al menú de un
disco.
Botones de dirección:
Seleccionan una opción en el
menú.
ENTER: Con rma la selección
del menú.
TUNE (+/-): Sintoniza la emisora de
radio deseada.
PRESET: Selecciona programas de
radio.
• • • • • • • • •
b
• • • • • • • • •
O
RETURN: Sale del menú o
reanuda la reproducción.
POPUP/ TOP MENU: Muestra el
menú del disco DVD o el menú
emergente del BD-ROM, cuando
haya uno disponible.
x
STOP: Detiene la reproducción.
B
PLAY: Comienza la reproducción.
X
PAUSE/STEP: La reproducción
cambia a modo de pausa.
.
/
>
SKIP: Pasa al archive/
pista/capítulo siguiente o anterior.
m
/
M
SCAN: Busca hacia atrás
o delante.
SPK LEVEL: Establece el nivel de
sonido del altavoz deseado.
z
USB REC: Graba un CD de
audio.
MUTE: Silencia la unidad.
SOUND: Selecciona un modo de
efecto de sonido.
VOL +/- : Ajusta el volumen del
altavoz.
• • • • • • • • •
c
• • • • • • • • •
Botones numéricos 0-9:
Selecciona las opciones numéricas
en un menú.
MARKER: Marca un punto
especí co durante la reproducción.
SEARCH: Muestra o sale del menú
de búsqueda.
REPEAT: Repite la sección
deseada.
CLEAR: Elimina la marca del menú
de búsqueda o un número al
de nir la contraseña.
DIMMER: Atenúa la luz del aparato.
ZOOM: Accede al menú de zoom.
Botones coloreados
(A, B, C, D):
Permiten navegar por los menús.
- A Botón (RDS): Sistema de datos
de radio.
- B Botón (PTY): Vistas del tipo de
programa del RDS.
- C Botón (PTY SEARCH): Busca el
tipo de programa.
- D Botón : Selecciona el modo FM
en mono o estéreo.
Botones de control de TV:
Consultar la página 67.
SLEEP: Establece un período de
tiempo concreto después del cual,
se apaga la unidad.
Colocación de las pilas
Retire la tapa de las pilas de
la parte trasera del mando
a distancia e introduzca una
pila R03 (tamaño AAA) con la
polaridad , correcta.
HB985-DB.BDEUPPK_SPA.indd 13HB985-DB.BDEUPPK_SPA.indd 13 2010-05-14  2:48:282010-05-14  2:48:28
14 Preparación
Preparación
2
Panel delantero
a
Bandeja del disco
b
Botones de funcionamiento
1
STANDBY/ON Botón
Z
(OPEN/CLOSE)
FUNCTION
Cambia la fuente de entrada o la función.
B
/
X
(PLAY / PAUSE)
x
(STOP)
.
/
>
(SKIP)
- TUNE + (Sintonización de la rada)
c
Sensor remoto
d
Ventana de visualización
e
PORTABLE IN
f
Puerto USB
g
Control de volumen
1
2
3 4 5 6 7
HB985-DB.BDEUPPK_SPA.indd 14HB985-DB.BDEUPPK_SPA.indd 14 2010-05-14  2:48:282010-05-14  2:48:28
15Preparación
2
Preparación
a
Cable de corriente alterna (CA)
Conectar a la fuente de alimentación.
b
Conexiones de los altavoces
c
Ventilador de refrigeración
d
Conexión de la antena
e
VIDEO OUT
f
AUX (L/R) INPUT
g
COMPONENT VIDEO (Y P
B
P
R
)
OUTPUT (PROGRESSIVE SCAN)
h
OPTICAL 1(TV) / 2
i
iPod (24 pin)
Conectar al cradle de iPod incluido.
j
HDMI OUT (tipo A, Versión 1.3)
Conecta a un TV con entradas HDMI.
k
Puerto LAN
Parte posterior
1 2 3 4 5
6 7 8 9 10 11
HB985-DB.BDEUPPK_SPA.indd 15HB985-DB.BDEUPPK_SPA.indd 15 2010-05-14  2:48:282010-05-14  2:48:28
16 Instalación
Instalación
3
Monte los altavoces
Con guración de los altavoces
BCS-707
Preparación de los altavoces
1. Coloque los apoyos antideslizantes en la
base de cada pie de altavoz, el subwoofer y
el altavoz central.
Para las bases de altavoz:
Utilice el adhesivo incluido para colocar los
cuatro apoyos centrales en la base (inferior)
de cada pie de altavoz.
middle non-skid pads
apoyos centrales antideslizantes
Para subwoofer:
Utilice el adhesivo incluido para colocar
los cuatro apoyos grandes en la base del
subwoofer.
large non-skid pads
apoyos grandes antideslizantes
Para altavoz central:
Utilice el adhesivo incluido para colocar
los cuatro apoyos pequeños en la base del
altavoz central.
small non-skid pads
apoyos pequeños
antideslizantes
2. Coloque los pies del altavoz en los vástagos
con los tornillos incluidos.
Cuando haya alineado el vástago y la base,
fíjelos con los tornillos pequeños en los
puntos que se muestran más adelante.
Tenga en cuenta que el altavoz debe
orientarse en la dirección de la base del
triángulo isósceles.
Rear
Front
Parte trasera
Frente
3
Instalación
HB985-DB.BDEUPPK_SPA.indd 16HB985-DB.BDEUPPK_SPA.indd 16 2010-05-14  2:48:282010-05-14  2:48:28
17Instalación
3
Instalación
3. Conecte los cables al reproductor.
Conecte el cable blanco con el lado de línea
gris (+) y el otro cable en el lado (-). Para
conectar el cable al reproductor, presione
cada pestaña plástica para abrir el terminal
de conexión. Introduzca el cable y suelte la
pestaña.
Color (+)
Negro (-)
PRECAUCIÓN
No conecte ningún altavoz diferente a los
suministrados con este sistema.
No conecte los altavoces suministrados a ningún
ampli cador diferente al que se incluye con
este sistema. La conexión a otro ampli cador
puede dar lugar a fallos de funcionamiento o un
incendio.
Fijación de los altavoces delanteros y
surround.
Coloque los altavoces delanteros y surround
con el pasador plástico incluido. Atornille
los dos ganchos en la pared detrás del
altavoz. Pase un cordón grueso alrededor de
los ganchos y a través del pasador plástico
para estabilizar el altavoz (asegúrese de que
soporte el peso del altavoz). Tras la instalación,
asegúrese de que se haya  jado correctamente
el altavoz.
thick cord
Plastic catch
Cordón con el
grosor su ciente
Pasador plástico
PRECAUCIÓN
El pasador plástico no es un componente
de montaje, y el altavoz no debe colgar
directamente de la pared con este pasador.
Utilice siempre un cordón para estabilizar el
altavoz.
Pioneer no acepta ninguna responsabilidad
por posibles pérdidas o daños resultantes
de un montaje o instalación incorrectos, una
resistencia insu ciente de los materiales de
instalación, uso incorrecto o desastres naturales.
Al colocar esta unidad, asegúrese de  jarla de
forma segura y evite áreas en las que exista la
posibilidad de que caiga y causarle lesiones si
se produce un desastre natural (por ejemplo, un
terremoto).
HB985-DB.BDEUPPK_SPA.indd 17HB985-DB.BDEUPPK_SPA.indd 17 2010-05-14  2:48:292010-05-14  2:48:29
18 Instalación
Instalación
3
Con guración de los altavoces
BCS-303
Preparación de los altavoces
1. Coloque los apoyos antideslizantes en la
base de cada altavoz.
Para las bases de altavoz:
Utilice el adhesivo incluido para colocar los
cuatro apoyos centrales pequeños en la
base (inferior) de cada pie de altavoz.
samll non-skid pads
apoyos antideslizantes
pequeños
Para subwoofer:
Utilice el adhesivo incluido para colocar
los cuatro apoyos grandes en la base del
subwoofer.
large non-skid pads
apoyos grandes
antideslizantes
Para altavoz central:
Utilice el adhesivo incluido para colocar
los cuatro apoyos pequeños en la base del
altavoz central.
samll non-skid pads
apoyos antideslizantes
pequeños
2. Conecte los cables al reproductor.
Conecte el cable blanco con el lado de línea
gris (+) y el otro cable en el lado (-). Para
conectar el cable al reproductor, presione
cada pestaña plástica para abrir el terminal
de conexión. Introduzca el cable y suelte la
pestaña.
Color (+)
Negro (-)
HB985-DB.BDEUPPK_SPA.indd 18HB985-DB.BDEUPPK_SPA.indd 18 2010-05-14  2:48:292010-05-14  2:48:29
19Instalación
3
Instalación
Montaje mural del
altavoz central
El altavoz central tiene un ori cio de montaje
que se puede usar para montar el altavoz en la
pared.
Antes del montaje
Recuerde que el sistema de altavoces es
pesado y que su peso podría hacer que se
a ojen los tornillos, o que falle el material de
la pared que los sujeta, con una posible caída
de los altavoces. Asegúrese de que la pared
en la que desea montar los altavoces tenga
la resistencia su ciente para soportarlos. No
realice el montaje sobre contrachapado o
paredes blandas.
No se incluyen los tornillos de montaje. Utilice
tornillos adecuados para el material de la pared
y apoye el peso del altavoz.
PRECAUCIÓN
Si no está seguro de la calidad y la resistencia de
una pared, consulte a un profesional.
Pioneer no se hace responsable de ningún
accidente o daños resultantes de una instalación
inadecuada.
5 mm
10 mm
Mounting screw
(not supplied)
Tornillo de montaje
(incluido)
Notas adicionales
sobre la colocación
Instale los altavoces principales delanteros
izquierdo y derecho a la misma distancia del
televisor.
Precauciones:
Asegúrese de enroscar el cable pelado del
altavoz e insértelo completamente en el
terminal del altavoz. Si alguno de los cables de
altavoz pelados toca el panel trasero, puede
hacer que se corte la alimentación eléctrica
como medida de seguridad.
Los altavoces delanteros, central y surround
suministrados con este sistema están
protegidos magnéticamente. Sin embargo,
dependiendo de la ubicación de instalación,
puede producirse distorsión del color si los
altavoces se instalan muy cerca de la pantalla
de un televisor. Si esto ocurre, apague el
televisor, y enciéndalo después de 15 – 30
minutos. Si el problema continúa, separe el
sistema de altavoces del televisor.
El subwoofer no está protegido
magnéticamente y, por esta razón, no puede
colocarse cerca de un televisor o monitor. No
coloque medios de almacenaje magnéticos
(como discos  exibles y cintas o cassettes de
vídeo) cerca del subwoofer.
No  je los altavoces delanteros/surround y el
subwoofer a una pared o techo. Podrían caerse
o causar lesiones.
De 5 mm a 7 mm
HB985-DB.BDEUPPK_SPA.indd 19HB985-DB.BDEUPPK_SPA.indd 19 2010-05-14  2:48:292010-05-14  2:48:29
20 Instalación
Instalación
3
Ubicación del sistema
La siguiente imagen muestra un ejemplo de
posicionamiento del sistema. Recuerde que la
ilustración en estas instrucciones di ere de la
unidad real, en cuanto a  nes explicativos
Para un sonido envolvente óptimo, todos
los altavoces aparte del subwoofer deberían
colocarse a la misma distancia de la posición
desde donde se van a escuchar (
A
).
A
B
D
E
F
A
A
A
A
A
G
C
A
Altavoz frontal izquierdo /
B
Altavoz frontal derecho:
Coloque los altavoces frontales a ambos
lados del monitor o pantalla y debidamente
alineados respecto a la pantalla.
C
Altavoz central:
Coloque el altavoz central encima o debajo del
monitor o pantalla.
D
Altavoz izquierdo envolvente /
E
Altavoz derecho envolvente:
Coloque estos altavoces detrás de la posición
desde donde se van a escuchar, orientados
ligeramente hacia dentro.
F
Subwoofer:
La posición del subwoofer no es tan
importante, ya que los sonidos de graves no
dependen en gran medida de su orientación.
No obstante, es mejor colocar el subwoofer
cerca de los altavoces frontales. Gírelo
ligeramente hacia el centro de la habitación
para reducir el re ejo contra la pared.
G
Unidad
PRECAUCIÓN
Tenga cuidado y asegúrese de que los niños no
se apoyen o dejen objetos en el *conducto del
altavoz. *Conducto del altavoz: Habitáculo para
sonidos bajos en la estructura (alojamiento) del
altavoz.
Coloque el altavoz central a una distancia segura
fuera del alcance de los niños.
De lo contrario, puede caerse y causar lesiones
personales y/o daños materiales.
Los altavoces contienen piezas magnéticas,
por lo que pueden aparecer irregularidades
cromáticas en la pantalla del televisor o en el
monitor del ordenador. Utilice los altavoces lejos
de la televisión y del monitor del ordenador.
HB985-DB.BDEUPPK_SPA.indd 20HB985-DB.BDEUPPK_SPA.indd 20 2010-05-14  2:48:292010-05-14  2:48:29
21Instalación
3
Instalación
Conexiones a su TV
Realice una de las conexiones siguientes,
dependiendo de las opciones del propio
equipo.
Conexión HDMI (página 21-22)
Conexión de vídeo componente
(página 22)
Conexión del vídeo (página 23)
NOTA
Dependiendo de su TV y otros equipos que
quiera conectar, hay varias formas de conectar el
reproductor. Utilice sólo una de las conexiones
descritas en este manual.
Por favor, consulte los manuales de su TV,
sistema estéreo y otros dispositivos según
necesite para establecer la mejor conexión
posible.
Asegúrese de que el reproductor está conectado
directamente al TV. Sintonice el TV al canal de
entrada de vídeo correcto.
No conecte el reproductor a través de su VCR.
La imagen podría distorsionarse debido al
sistema de protección anti-copia.
Conexión HDMI
Si dispone de un televisor o monitor HDMI,
puede conectarlo a este reproductor usando
un cable HDMI (tipo A, Versión 1.3).
Conecte la toma HDMI OUT del reproductor
a la toma HDMI IN de un televisor o monitor
compatible con HDMI.
Conexión HDMI
Player
TV
Televisor
Reproductor
Seleccione la fuente del televisor a HDMI
(consulte el manual de instrucciones del
televisor).
HB985-DB.BDEUPPK_SPA.indd 21HB985-DB.BDEUPPK_SPA.indd 21 2010-05-14  2:48:302010-05-14  2:48:30
22 Instalación
Instalación
3
NOTA
No modi que la resolución si la conexión ya se
ha establecido, podrían producirse fallos en el
funcionamiento. Para resolver este problema,
apague el reproductor y vuelva a encenderlo.
Cuando la conexión HDMI con el HDCP no
esté veri cada, la pantalla de TV cambiará a
una pantalla negra. En este caso, compruebe la
conexión HDMI o desconecte el cable HDMI.
Si aparecen ruidos o líneas en la pantalla,
compruebe el cable HDMI (la longitud se limita
generalmente a 4,5 m y se utiliza un cable HDMI
de alta velocidad (versión 1.3).
Si un dispositivo HDMI conectado no acepta
la salida de audio del reproductor, el audio del
dispositivo HDMI podrá distorsionarse o no
emitirse.
Si utiliza una conexión HDMI, se puede cambiar
la resolución para la salida HDMI.
(Consulte Ajuste de la resolución en la página 23).
Seleccione el tipo de salida de vídeo de la toma
HDMI OUT mediante la opción [Conf. color
HDMI] en el menú [Con g.] (ver página 34).
Cuando conecte un dispositivo compatible
con HDMI o DVI, realice las siguientes
comprobaciones:
- Intente apagar el dispositivo HDMI/DVI y
este reproductor. A continuación, encienda el
dispositivo HDMI/DVI y transcurridos unos 30
segundos, encienda el reproductor.
- La entrada de vídeo del dispositivo conectado
está seleccionada correctamente para esta
unidad.
- El dispositivo conectado es compatible con
las entradas de vídeo de resolución 720x576p
(480p), 1280x720p, 1920x1080i o 1920x1080p.
o todos los dispositivos HDMI o DVI compatibles
con HDCP funcionarán con este reproductor.
- La imagen no se verá correctamente con un
dispositivo que no sea compatible con HDCP.
- El reproductor no funciona y la pantalla de TV
se vuelve negra.
Conexión de vídeo componente
Conecte las tomas COMPONENT VIDEO
OUT del reproductor a las tomas de entrada
correspondientes del televisor usando cables
Y Pb Pr. Puede oír el sonido a través del altavoz
del sistema.
Conexión de componentes
Player
TV
Green
Blue
Red
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Reproductor
Verde
Azul
Rojo
Televisor
NOTA
Si utiliza la conexión COMPONENT VIDEO OUT,
puede modi car la resolución de salida (consulte el
apartado Ajuste de la resolución en la página 23.)
HB985-DB.BDEUPPK_SPA.indd 22HB985-DB.BDEUPPK_SPA.indd 22 2010-05-14  2:48:302010-05-14  2:48:30
23Instalación
3
Instalación
Conexión del vídeo
Conecte la toma VIDEO OUT del reproductor
a la toma de entrada de vídeo situada en el
televisor mediante un cable de vídeo. Puede
oír el sonido a través del altavoz del sistema.
Conexión del vídeo
TV
Yellow
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Reproductor
Televisor
Amarillo
Ajuste de la resolución
El reproductor proporciona varias resoluciones
de salida para las conexiones HDMI OUT y
COMPONENT VIDEO OUT. Es posible cambiar la
resolución mediante el menú [Con g.].
1. Pulse HOME MENU (
).
2. Utilice
I
/
i/U
/
u
para seleccionar el menú
[
Con g.
]
y pulse ENTER ( ). Aparecerá el
menú [Con g.].
3. Utilice
U
/
u
para seleccionar la opción
[PANTALLA] y, a continuación, pulse
i
para
pasar al segundo nivel.
4. Utilice
U
/
u
para seleccionar la opción
[Resolución] y, a continuación, pulse ENTER
(
) o
i
para pasar al tercer nivel.
5. Use
U
/
u
para seleccionar una opción y,
a continuación, pulse ENTER ( ) para
con rmar su selección.
NOTA
Si su televisor no acepta la resolución que ha
con gurado en el reproductor, es posible ajustar
la resolución a 576p (480p) de la siguiente
manera:
1. Pulse
Z
para abrir la bandeja de discos.
2 Pulse
x
por más de 5 segundos.
Como son varios los factores que in uyen
en la resolución de salida de vídeo, consulte
“Resolución de la salida de vídeo en la página
70.
HB985-DB.BDEUPPK_SPA.indd 23HB985-DB.BDEUPPK_SPA.indd 23 2010-05-14  2:48:312010-05-14  2:48:31
24 Instalación
Instalación
3
Conexión de la antena
Conecte la antena facilitada para escuchar la
radio.
Conexión de la antena
Player
Reproductor
NOTA
Después de conectar la antena por hilo FM,
manténgala lo más horizontal posible. Asegúrese
de sacar la antena por hilo FM completamente.
Conexiones con un
dispositivo externo
Conexión auxiliar
Puede disfrutar del sonido de su componente
con las tomas de salida de audio analógicas de
los altavoces del sistema.
Conecte las tomas de salida de audio
analógicas a su componente en la conexión
auxiliar izquierda o derecha de esta unidad. Y
después, seleccione la opción [AUX] pulsando
INPUT/TUNER,
I
/
i
y ENTER
(
).
Conexión auxiliar
Player
To the audio output jacks
of your component
(TV, VCR, etc.)
Red
White
PR
PB
Y
COMPONENT
VIDEO
INPUT
L
AUX
R
VIDEO
Rojo
Blanco
Reproductor
A la toma de salida de
audio de su componente
(TV, VCR, etc.)
HB985-DB.BDEUPPK_SPA.indd 24HB985-DB.BDEUPPK_SPA.indd 24 2010-05-14  2:48:322010-05-14  2:48:32
25Instalación
3
Instalación
Conexión a entrada de puerto
Puede disfrutar del sonido de su reproductor
de audio portátil desde los altavoces del
sistema.
Conecte la toma de los auriculares (o la salida
de línea) del reproductor de audio portátil a la
entrada del puerto en esta unidad. Y después,
seleccione la opción [PORTABLE] pulsando
INPUT/TUNER,
I
/
i
y ENTER
(
).
Conexión a entrada de puerto
twZGSGUUU
Reproductor de
MP3, etc.
Conexión a entrada óptica 1/2
Puede disfrutar del sonido de su componente
con la conexión óptica digital de los altavoces
del sistema.
Conecte la toma de salida óptica de su
componente a las tomas de entrada óptica 1/2
de la unidad. Y después, seleccione la opción
[OPTICAL 1/2] pulsando INPUT/TUNER,
I
/
i
y
ENTER
(
). O pulse OPTICAL para seleccionar
directamente.
Conexión óptica
To the digital
optical output jack
of your component
A la toma de salida
óptica digital de su
componente
HB985-DB.BDEUPPK_SPA.indd 25HB985-DB.BDEUPPK_SPA.indd 25 2010-05-14  2:48:322010-05-14  2:48:32
26 Instalación
Instalación
3
Conexión Bluetooth®
Acerca de Bluetooth
Bluetooth® es una tecnología de comunicación
inalámbrica para conexiones de corta distancia.
El alcance disponible es de 10 metros. (Puede
interrumpirse el sonido si hay interferencias
causadas por otra onda electrónica o si se
conecta el bluetooth en otras habitaciones.)
La conexión de aparatos individuales bajo
Tecnología inalámbrica Bluetooth no incurre
en ningún cargo. Se puede utilizar un teléfono
móvil con tecnología inalámbrica Bluetooth
a través de Cascade, si la conexión se ha
realizado con tecnología inalámbrica Bluetooth.
Aparatos disponibles: Teléfono móvil, MP3,
ordenador portátil, PDA (estas unidades deben
ser compatibles con auriculares estéreo.)
Per les de Bluetooth
Para utilizar la tecnología inalámbrica Bluetooth,
los aparatos deben cumplir con ciertos per les.
Este equipo es compatible con el per l
siguiente.
A2DP (Advanced Audio Distribution Pro le)
Escuchar música de un aparato
Bluetooth
Acoplar su equipo y un aparato Bluetooth
Antes de comenzar el procedimiento de
acoplamiento, asegúrese de que se haya
activado la función Bluetooth del aparato
Bluetooth. Consulte la guía de usuario del
aparato Bluetooth. Una vez realizado con éxito
el acoplamiento, no es necesario volver a
realizarlo.
1. Selección la función Bluetooth con INPUT/
TUNER o BT AUDIO.
Aparece “BT AUDIO” y, posteriormente, “BT
READY” en la ventana de la pantalla.
2. Encienda el aparato Bluetooth y realice la
operación de acoplamiento. Durante la
búsqueda del aparato Bluetooth, quizás
se muestre una lista de los dispositivos
encontrados en la pantalla del aparato
Bluetooth, dependiendo del tipo de aparato
de que se trate. Su equipo aparece como
“PIONEER AUDIO”.
3. Introduzca el código PIN.
Código PIN: 0000
4. Cuando se haya realizado el acoplamiento
con éxito, se iluminará el LED del Bluetooth
y se mostrará “BT SINK.
NOTA
Dependiendo del tipo de aparato de que se trate,
el modo de acoplamiento puede ser diferente.
5. Escuchar música.
Para reproducir música guardada en el
aparato Bluetooth, consulte la guía de
usuario de ese aparato.
NOTA
Si cambia la función del equipo, se desconectará
la función Bluetooth y deberá realizar de nuevo
el acoplamiento.
AVRCP no está disponible en este modo.
HB985-DB.BDEUPPK_SPA.indd 26HB985-DB.BDEUPPK_SPA.indd 26 2010-05-14  2:48:322010-05-14  2:48:32
27Instalación
3
Instalación
Comprobación de la información del
aparato Bluetooth conectado
Esta función se realiza tras el acoplamiento.
Puede comprobar la información Bluetooth.
Mantenga pulsado DISPLAY repetidamente.
La información de Bluetooth cambia del modo
siguiente. Dirección local de aparato Bluetooth
t
Nombre de aparato
t
Ninguno
t
...
NOTA
Este equipo no es compatible con el per l de
auriculares mono (per l de manos libres).
El sonido podría interrumpirse cuando otra onda
electrónica inter era en la conexión.
No se puede controlar el aparato Bluetooth con
este equipo.
El acoplamiento se limita a un aparato Bluetooth
por equipo y no es posible el acoplamiento
múltiple.
Aunque la distancia entre su Bluetooth y el
aparato sea inferior a 10 m, si hay obstáculos
entre ambos, no se podrá conectar el aparato
Bluetooth.
Dependiendo del tipo de aparato, quizás no
pueda usar la función Bluetooth.
Cuando no se ha conectado el Bluetooth,
aparece “BT READY” en la ventana de la pantalla.
Si se produce un fallo eléctrico debido a
aparatos que utilizan la misma frecuencia, como
equipos médicos, microondas o dispositivos
LAN inalámbricos, se interrumpirá la conexión.
Cuando se sitúe una persona en el recorrido de
la comunicación entre el aparato Bluetooth y el
reproductor, se interrumpirá la conexión.
Si aumenta la distancia entre el Bluetooth y el
equipo, se reducirá la calidad del sonido y la
conexión se interrumpirá si el espacio entre el
Bluetooth y el equipo es superior al alcance del
Bluetooth.
Se desconecta el aparato con tecnología
inalámbrica Bluetooth, si se apaga el equipo
principal o la distancia entre el aparato y la
unidad principal es superior a 10 m.
HB985-DB.BDEUPPK_SPA.indd 27HB985-DB.BDEUPPK_SPA.indd 27 2010-05-14  2:48:322010-05-14  2:48:32
28 Instalación
Instalación
3
Conexión a la red
doméstica
Este reproductor se puede conectar a una red
de área local (LAN) a través de un puerto LAN
en el panel trasero.
Para más información consulte la
documentación del dispositivo de red.
Conecte el puerto LAN del reproductor al
correspondiente puerto del módem o router
a través de un cable de red LAN o cable
Ethernet (CAT5 o superior con conector RJ45)
disponibles en comercios.
En el ejemplo de con guración de una
conexión por cable que se muestra a
continuación, el reproductor puede acceder
al contenido desde cualquiera de los
ordenadores.
Conexión a red
Broadband
Service
Router
WAN
LAN 1
LAN 2
LAN 3
Player
PC
PC
Router
Servicio
de banda
ancha
Reproductor
NOTA
Cuando enchufe o desenchufe el cable LAN,
hágalo sujetando el cable por el enchufe.
Al desenchufarlo, no estire del cable LAN,
desenchúfelo presionando hacia abajo el
enchufe.
No conecte un cable de teléfono modular al
puerto LAN.
Existen varias con guraciones para la conexión,
siga las especi caciones de su compañía de
telecomunicaciones o de su proveedor de
Internet.
Si desea acceder a contenido desde ordenadores
o servidores DLNA, el reproductor deberá estar
conectado a la misma red de área local que
dichos ordenadores o servidores a través de un
router.
HB985-DB.BDEUPPK_SPA.indd 28HB985-DB.BDEUPPK_SPA.indd 28 2010-05-14  2:48:322010-05-14  2:48:32
29Instalación
3
Instalación
Con guración de la red
Antes de ajustar la red por cable, es necesario
conectar Internet de banda ancha a su red
doméstica.
Si hay un servidor DHCP en la red de área
local (LAN) a través de una conexión por
cable, a este reproductor se le asignará
automáticamente una dirección IP.
Después de realizar la conexión física,
es posible que se tenga que ajustar la
con guración de red del reproductor
en algunas redes domésticas. Ajuste la
con guración de [RED] de la siguiente manera.
1. Seleccione la opción [Con g de conexión]
en el menú [Con g.] y, a continuación,
pulse ENTER (
).
2. Utilice
U
/
u
/
I
/
i
para seleccionar el modo
IP entre [Dinámico] y [Estático].
Normalmente, seleccione [Dinámico] para
asignar de forma automática una dirección
IP.
NOTA
Si no hay disponible un servidor DHCP en la red
y desea con gurar manualmente la dirección IP,
seleccione [Estático] y, a continuación, [dirección
IP], [máscara de red], [gateway] y [servidor DNS]
mediante los botones
U
/
u
/
I
/
i
y los botones
numéricos.
Si se equivoca mientras introduce un número,
pulse CLEAR para borrar la parte resaltada.
3. Seleccione [OK] y pulse ENTER ( ) para
aplicar los ajustes de red.
4. El reproductor le pedirá que compruebe la
conexión de red. Seleccione [OK] y pulse
ENTER ( ) para completar la conexión de
red.
5. Si selecciona [Test] y pulsa ENTER ( ) en el
paso 4 anterior, el estado de conexión de la
red se mostrará en la pantalla.
Además, es posible hacer la comprobación
en [Estado conexión] en el menú [Con g.].
HB985-DB.BDEUPPK_SPA.indd 29HB985-DB.BDEUPPK_SPA.indd 29 2010-05-14  2:48:332010-05-14  2:48:33
30 Instalación
Instalación
3
Notas sobre la conexión de red:
Muchos de los problemas de conexión
a la red que se producen durante la
con guración pueden resolverse a menudo
reseteando el router o cable módem.
Después de conectar el reproductor a la
red doméstica, apague inmediatamente y/
o desconecte el cable de alimentación del
router o cable módem de la red doméstica.
Después, encienda y/o conecte de nuevo el
cable de alimentación.
El número de dispositivos que pueden recibir
el servicio de Internet quedará limitado
por las condiciones de servicio aplicables
dependiendo del proveedor de servicios de
Internet (ISP). Para obtener más información,
póngase en contacto con su ISP.
Nuestra empresa no se responsabiliza de un
mal funcionamiento del reproductor y/o la
función de conexión a Internet por errores/
fallos de comunicación con su conexión
a Internet de banda ancha u otro equipo
conectado.
Nuestra empresa no es la creadora o
suministradora de las características de
los discos BD-ROM disponibles en la
función de conexión a Internet, y tampoco
se responsabiliza de su funcionalidad o
disponibilidad continuada. Puede que haya
material relacionado con el disco disponible
a través de la conexión a Internet que sea
incompatible con este reproductor. Si tiene
alguna duda acerca de dicho contenido,
póngase en contacto con el fabricante del
disco.
Algunos contenidos de Internet pueden
requerir una conexión con un ancho de
banda superior.
Incluso si el reproductor está correctamente
conectado y con gurado, puede que parte
de los contenidos de Internet no funcionen
correctamente debido a congestión de
Internet, la calidad o ancho de banda de
su servicio de Internet, o problemas con el
proveedor de contenido.
Es posible que algunas operaciones
de conexión a Internet no se puedan
realizar debido a ciertas restricciones del
proveedor de servicios de Internet (ISP) que
le proporciona la conexión a Internet de
banda ancha.
Los costes del proveedor de Internet
incluidos (sin limitación) los cargos de
conexión corren por su cuenta y riesgo.
Se necesita un puerto 10 LAN Base-T o 100
Base-TX para la conexión por cable a este
reproductor. Si su servicio de Internet no
permite ese tipo de conexiones no podrá
conectar el reproductor.
Para utilizar el servicio xDSL necesitará un
router.
Es necesario un módem DSL para utilizar el
servicio DSL y un cable módem para usar
el servicio de cable módem. Dependiendo
del método de acceso y el acuerdo de
suscripción que tenga con su ISP, puede que
no pueda utilizar la función de conexión a
Internet de este reproductor, o puede que
se limite al número de dispositivos que se
pueden conectar a la vez. (Si su ISP limita
la suscripción a un dispositivo, puede que
este reproductor no pueda conectarse si ya
hay conectado un ordenador).
Puede que el uso de un “Router no esté
permitido o su uso esté limitado según las
políticas y restricciones de su ISP. Para más
información, póngase directamente en
contacto con su ISP.
Apague todos los equipos de red que no
utilice en su red doméstica local. Algunos
dispositivos pueden generar trá co de red.
HB985-DB.BDEUPPK_SPA.indd 30HB985-DB.BDEUPPK_SPA.indd 30 2010-05-14  2:48:332010-05-14  2:48:33
31Instalación
3
Instalación
Conexión de
dispositivos USB
Este reproductor puede reproducir archivos
de vídeo, música y fotos guardados en el
dispositivo USB.
1. Inserte un dispositivo USB en el puerto USB
hasta que se ajuste en su posición.
Conexión USB
2. Pulse HOME MENU.
Seleccione [Película], [Foto] o [Música] con
los botones
U
/
u
/
I
/
i
, y pulse ENTER ( ).
3. Seleccione un archivo con los botones
U
/
u
/
I
/
i
, y pulse PLAY o ENTER (
) para
reproducir el archivo.
Puede comprobar el espacio del dispositivo
USB en la pantalla.
4. Seleccione el otro modo.
Y retire el dispositivo USB con cuidado.
NOTA
Este reproductor es compatible con memoria
ash USB/HDD externo formateado en FAT16,
FAT32 y NTFS cuando se accede a archivos
(música, fotos, vídeos). Sin embargo, para la
grabación de CD de audio y BD-LIVE sólo son
compatibles los formatos FAT16 y FAT32. Utilice
la memoria  ash USB/HDD externo formateado
en FAT16 o FAT32 cuando use la grabación de
CD de audio y BD-LIVE.
El dispositivo USB puede utilizarse para el
almacenamiento local y así disfrutar de discos
BD-LIVE con Internet.
Esta unidad admite hasta 4 particiones del
dispositivo USB.
No extraiga el dispositivo USB mientras esté en
funcionamiento (reproducción, etc.).
No es compatible con un dispositivo USB que
necesite un programa de instalación adicional al
estar conectado al ordenador.
Dispositivo USB: Dispositivo USB que admite
USB 1,1 y USB 2,0.
Se pueden reproducir archivos de vídeo, música
y fotos. Para obtener una información detallada
de funcionamiento con cada archivo, consulte
las páginas correspondientes.
Es recomendable realizar copias de seguridad
regularmente para evitar pérdida de datos.
Si utiliza un cable de extensión USB, un HUB USB
o un multilector USB, el dispositivo USB puede
no reconocerse.
Es posible que algunos dispositivos USB no
funcionen con esta unidad.
No admite cámaras digitales ni teléfonos
móviles.
El puerto USB de este aparato no puede
conectarse a un ordenador.
HB985-DB.BDEUPPK_SPA.indd 31HB985-DB.BDEUPPK_SPA.indd 31 2010-05-14  2:48:332010-05-14  2:48:33
32 Instalación
Instalación
3
Ajustes
Ajuste de los valores de
con guración
Es posible modi car los ajustes del reproductor
en el menú [Con g.].
1. Pulse HOME MENU (
).
2. Utilice
I
/
i/U
/
u
para seleccionar el menú
[Con g.] y pulse ENTER ( ). Aparecerá el
menú [Con g.].
3. Utilice
U
/
u
para seleccionar la primera
opción de con guración y pulse
i
para
pasar al segundo nivel.
4. Utilice
U
/
u
para seleccionar una segunda
opción de con guración y pulse ENTER (
)
para desplazarse hasta el tercer nivel.
5. Utilice
U
/
u
para seleccionar la opción
deseada y pulse
i
o ENTER ( ) para
con rmar su selección.
HB985-DB.BDEUPPK_SPA.indd 32HB985-DB.BDEUPPK_SPA.indd 32 2010-05-14  2:48:332010-05-14  2:48:33
33Instalación
3
Instalación
Menú [PANTALLA]
Aspecto TV
Seleccione una relación de aspecto del TV
según el tipo de televisor.
[Formato Carta 4:3]
Selecciónelo cuando haya una pantalla
de televisión tradicional (4:3) conectada.
Muestra la imagen con barras que la
ocultan por la parte superior e inferior.
[Form. panorám. 4:3]
Selecciónelo cuando haya una pantalla
de televisión tradicional (4:3) conectada.
Muestra la imagen recortada para ajustarse
a la pantalla de su TV. Ambos lados de la
imagen están recortados.
[16:9 Original]
Seleccione esta opción cuando se haya
conectado a una TV panorámica 16:9. La
imagen de formato 4:3 se mostrará con
una proporción de 4:3 con bandas negras a
derecha e izquierda.
[16:9 Completa]
Seleccione esta opción cuando se haya
conectado a una TV panorámica 16:9.
La imagen de formato 4:3 se ajustará
horizontalmente (en proporción lineal) para
llenar toda la pantalla.
NOTA
No se puede seleccionar [Formato Carta 4:3] y
[Form. panorám. 4:3] si la resolución está ajustada
en un valor superior a 720p.
Resolución
Ajusta la resolución de salida de la señal de
vídeo HDMI y de componente. Re érase a la
página 23 y 70 para obtener detalles sobre la
con guración de la resolución.
[Auto]
Si la conexión [HDMI OUT] se conecta a una
TV que proporcione información de pantalla
(EDID), se seleccionará automáticamente
la resolución que mejor se adapte a la TV
conectada. Si solamente está conectada
la conexión COMPONENT VIDEO OUT], la
resolución se cambiará a 1080i de forma
predeterminada.
[1080p]
Representa 1080 líneas de vídeo progresivo.
[1080i]
Representa 1080 líneas de vídeo
entrelazado.
[720p]
Representa 720 líneas de vídeo progresivo.
[576p (480p)]
Representa 576 (480) líneas de vídeo
progresivo.
[576i (480i)]
Representa 576 (480) líneas de vídeo
entrelazado.
HB985-DB.BDEUPPK_SPA.indd 33HB985-DB.BDEUPPK_SPA.indd 33 2010-05-14  2:48:332010-05-14  2:48:33
34 Instalación
Instalación
3
Pantalla 1080p
Cuando la resolución se con gure como
1080p, seleccione la opción [24Hz] para
obtener una presentación limpia del material
lmado (1080p/24 Hz) con una pantalla
equipada con HDMI compatible con la entrada
1080p/24 Hz.
NOTA
Si selecciona [24 Hz], podrían producirse
distorsiones en la imagen cuando el vídeo
cambia material  lmográ co y de vídeo. En ese
caso, seleccione [50 Hz].
Incluso cuando la opción [Pantalla 1080p] se
con gura a [24 Hz], si la TV no es compatible
con 1080p/24 Hz, la frecuencia de fotogramas
real de la salida de video será 50 Hz según el
formato de la fuente de vídeo.
Conf. color HDMI
Seleccione el tipo de salida de la conexión
HDMI OUT. Para esta con guración, consulte
los manuales del dispositivo de pantalla.
[YCbCr]
Seleccione esta opción al conectar a un
dispositivo de pantalla HDMI.
[RGB]
Seleccione esta opción al conectar a un
dispositivo de pantalla DVI (RGB).
Menú [IDIOMA]
Menú de visualización
Seleccione un idioma para el menú [Con g.] y
para la información en pantalla.
Menú del disco/Audio del disco/
Subtítulo del disco
Seleccione el idioma que pre era para la pista
de audio (audio del disco), los subtítulos, y el
menú del disco.
[Original]
Hace referencia al idioma original en que se
grabó el disco.
[Otros]
Pulse ENTER (
) para seleccionar otro
idioma. Use los botones numéricos y a
continuación ENTER ( ) para introducir
el número de 4 dígitos según la lista de
códigos de idioma de la página 69.
[Apagado] (sólo para subtítulos del
disco)
Desactiva los subtítulos.
NOTA
Puede que el ajuste del idioma no funcione
dependiendo del disco.
HB985-DB.BDEUPPK_SPA.indd 34HB985-DB.BDEUPPK_SPA.indd 34 2010-05-14  2:48:332010-05-14  2:48:33
35Instalación
3
Instalación
Menú [AUDIO]
Ajuste Altavoces
Para obtener el mejor sonido posible, utilice
la pantalla de con guración del altavoz para
especi car el volumen de los altavoces que
ha conectado y la distancia desde donde se
van a escuchar. Utilice la prueba para ajustar el
volumen de los altavoces al mismo nivel.
[Altavoces]
Seleccione un altavoz que quiera ajustar.
[Volumen]
Ajusta el nivel de salida de cada altavoz.
[Distancia]
Ajusta la distancia entre cada altavoz y la
posición desde donde se van a escuchar.
[Prueba/ Parar tono de prueba]
Los altavoces emitirán un tono de prueba.
[OK]
Con rma la con guración.
[Cancelar]
Cancela la con guración.
Sincronismo HD AV
A veces, la televisión digital se encuentra con
cierto desfase entre la imagen y el sonido Si
esto ocurre, se puede compensar ajustando
cierto retraso en el sonido de manera que éste
espere a que llegue la imagen; es lo que se
denomina “Sincronismo HD AV.
Utilice
U u
para aumentar o disminuir el
tiempo de retraso, eligiendo entre 0 y 300 ms.
El retraso variará según el canal de televisión
digital que esté viendo. Si cambia de canal
deberá volver a ajustar el valor Sincronismo HD
AV.
DRC (Control de rango dinámico)
Cuando se reproduce contenido codi cado en
Dolby Digital o Dolby Digital Plus, puede que
quiera comprimir el rango dinámico de la salida
de audio (la diferencia entre los sonidos más
altos y los más bajos). Esta opción le permite
escuchar una película con el volumen bajo sin
perder la precisión del sonido. Con gurar en
[Activo] para obtener este efecto.
NOTA
El ajuste DRC se puede modi car sólo cuando no
hay discos en la unidad o ésta se encuentra parada
completamente.
HB985-DB.BDEUPPK_SPA.indd 35HB985-DB.BDEUPPK_SPA.indd 35 2010-05-14  2:48:342010-05-14  2:48:34
36 Instalación
Instalación
3
Menú [BLOQUEO]
Para acceder a las distintas funciones de
[BLOQUEO] es preciso introducir el código
de seguridad de 4 dígitos establecido
anteriormente.
Si todavía no ha introducido una contraseña,
se le pedirá que lo haga. Introduzca dos veces
una contraseña de 4 dígitos y pulse ENTER (
)
para crear una nueva contraseña.
Contraseña
Puede crear o cambiar la contraseña.
[Ninguno]
Introduzca dos veces una contraseña de 4
dígitos y pulse ENTER (
) para crear una
nueva contraseña.
[Cambiar]
Introduzca la contraseña actual y pulse
ENTER (
). Introduzca dos veces una
contraseña de 4 dígitos y pulse ENTER (
)
para crear una nueva contraseña.
NOTA
Si se equivoca antes de pulsar ENTER
( )
, pulse CLEAR.
A continuación, introduzca la contraseña correcta.
Si olvida su contraseña,
Si olvida su contraseña, puede borrarla siguiendo
estos pasos:
1. Extraiga los discos que puedan estar en el
reproductor.
2. Seleccione la opción [Bloqueo] en el menú
[Con g.].
3. Utilice los botones numéricos para introducir
“210499” en el menú [Bloqueo]. Se borra la
contraseña.
Índice DVD
Bloquea la reproducción de un DVD clasi cado
según su contenido. (No todos los discos están
clasi cados).
[Indice 1-8]
La clasi cación uno (1) es la que tiene más
restricciones y la ocho (8) la que menos.
[Desbloqueo]
Si se selecciona esta opción, el control
paterno no está activo y el disco se
reproduce en su totalidad.
Índice BD
Establece un límite de edad para la
reproducción de BD-ROM. Utilice los botones
numéricos para introducir un límite de edad
para la visualización de BD-ROM.
[255]
Todos los BD-ROM se pueden reproducir.
[0-254]
Prohíbe la reproducción de BD-ROM con
la correspondiente selección de valoración
incorporada.
NOTA
El [Índice BD] se aplicará sólo para el disco BD que
contiene el control de clasi cación avanzada.
Código del país
Introduzca el código del área cuyos estándares
se han utilizado para valorar el DVD, según la
lista que aparece en la página 68.
HB985-DB.BDEUPPK_SPA.indd 36HB985-DB.BDEUPPK_SPA.indd 36 2010-05-14  2:48:342010-05-14  2:48:34
37Instalación
3
Instalación
Menú [RED]
Con g de conexión
Si su entorno de red doméstica está preparado
para la conexión del reproductor, se deberá
con gurar la conexión de red por cable del
reproductor para una comunicación por red.
(Consulte la “Conexión a la red doméstica en
las página 28.)
Estado conexión
Si desea comprobar el estado de red en este
reproductor, seleccione las opciones
[Enlace principal] y pulse ENTER ( ) para
comprobar si se ha establecido una conexión a
la red e Internet.
Conexión BD-LIVE
Al usar las funciones de BD-LIVE puede
restringir el acceso a Internet.
[Permitido]
El acceso a Internet se permite a todos los
contenidos de BDLive.
[Permiso parcial]
El acceso a Internet se permite solamente
al contenido de BD-LIVE que disponga
de certi cados de propietario. El acceso
a Internet y las funciones AACS queda
prohibido para todo el contenido BD-LIVE
sin certi cado.
[Prohibido]
El acceso a Internet queda prohibido a
todos los contenidos de BD-LIVE.
Menú [OTROS]
DivX VOD
ACERCA DE DIVX VIDEO: DivX ® es un formato
de vídeo digital creado por DivX, Inc. Se trata
de un dispositivo o cial con certi cación DivX
que reproduce vídeo DivX. Visite
www.divx.com y podrá obtener más
información y herramientas de software para
convertir sus archivos de vídeo en DivX.
ACERCA DE VÍDEO A DEMANDA DIVX: Este
dispositivo DivX Certi ed ® debe registrarse
para poder reproducir contenido de vídeo a
demanda DivX (VOD).
Para generar el código de registro, busque
la sección de DivX VOD en el menú de
con guración del dispositivo. Visite la página
vod.divx.com con este código, complete el
proceso de registro y obtenga más información
acerca de DivX VOD.
[Registrar]
Muestra el código de registro de su
reproductor.
[Anular registro]
Desactiva el reproductor y visualiza el
código de desactivación.
NOTA
Todos los vídeos descargados de DivX® VOD con
el código de registro de este reproductor sólo
pueden reproducirse en esta unidad.
HB985-DB.BDEUPPK_SPA.indd 37HB985-DB.BDEUPPK_SPA.indd 37 2010-05-14  2:48:342010-05-14  2:48:34
38 Instalación
Instalación
3
Desconexión automat
El protector de pantalla aparece cuando el
reproductor se deja en el modo de parada
durante más de cinco minutos. Si con gura
esta opción en [Activo], la unidad se
desconecta automáticamente después de que
el protector de pantalla se muestre durante 25
minutos. Con gure esta opción en [Apagado]
para dejar el protector de pantalla hasta que la
unidad sea accionada por el usuario.
Inicializar
Ajuste de fábrica
Se pueden restablecer la con guración del
reproductor a los ajustes predeterminados
de fábrica.
Espac. libre en BD
Inicializa el contenido de BD desde el
almacenamiento USB conectado.
NOTA
Si restaura la con guración de fábrica del
reproductor utilizando la opción [Ajuste de fábrica]
deberá realizar la activación de los servicios en
línea y con guración de red de nuevo.
Información de software
Muestra la versión actual del software.
HB985-DB.BDEUPPK_SPA.indd 38HB985-DB.BDEUPPK_SPA.indd 38 2010-05-14  2:48:342010-05-14  2:48:34
39Instalación
3
Instalación
Efecto de sonido
Puede seleccionar un modo de sonido
adecuado. Pulse SOUND varias veces hasta
que aparezca el modo deseado en la pantalla
del panel frontal o en la pantalla del TV. Los
elementos mostrados en el ecualizador
pueden variar según las fuentes de sonido y
los efectos.
[Pioneer 1]: Le proporciona el ajuste de sonido
adecuado cuando se conectan altavoces de
tipo pequeño (S-BD303).
[Pioneer 2]: Le proporciona el ajuste de sonido
adecuado cuando se conectan altavoces de
tipo alto (S-BD707T).
[Bypass]: Las señales de audio envolvente y
de múltiples canales se reproducen según la
manera en la que se grabaron.
[Bass Blast]: Refuerza el efecto del sonido
grave desde el altavoz frontal izquierdo y
derecho y el subwoofer.
[PL ll Movie]: Realiza la decodi cación del
modo de película Pro Logic II en la señal de
entrada y produce cinco canales de salida de
banda ancha desde las fuentes de 2 canales.
Este ajuste es ideal para ver vídeos de películas
ya grabadas o antiguas. Este modo está
disponible sólo en las fuentes de 2 canales.
[PL ll Music]: Realiza la decodi cación del
modo de música Pro Logic II en la señal de
entrada y produce cinco canales de salida
de banda ancha desde las fuentes de 2
canales. Este ajuste es ideal para las fuentes de
estéreo normal como un CD. Este modo está
disponible sólo en las fuentes de 2 canales.
[Clear Voice]: Este modo ofrece un sonido de
voz claro, mejorando la calidad de la voz que
se escucha.
[Game]: Puede disfrutar de un sonido
más virtual mientras se entretiene con sus
videojuegos.
[Night]: Esta opción puede ser útil si quiere ver
películas con el volumen bajo porque ya es
tarde.
[Mus. ReTouch]: Cuando escuche archivos
MP3 u otro tipo de música comprimida, podrá
mejorar el sonido. Este modo está disponible
sólo en las fuentes de 2 canales.
[Loudness]: Mejora el sonido de graves y
agudos.
HB985-DB.BDEUPPK_SPA.indd 39HB985-DB.BDEUPPK_SPA.indd 39 2010-05-14  2:48:342010-05-14  2:48:34
40 Funcionamiento
Funcionamiento
4
Reproducción general
Reproducción de discos
1. Pulse
Z
OPEN/CLOSE, y coloque un disco
en la bandeja de discos.
2. Pulse
Z
OPEN/CLOSE para cerrar la bandeja
de discos.
La mayoría de CDs de audio, BD-ROM y
DVD-ROM se reproducen automáticamente.
3. Pulse
HOME MENU.
4. Seleccione [Película], [Foto] o [Música] con
los botones
U
/
u
/
I
/
i
, y pulse ENTER ( ).
5. Seleccione la opción Disco con
I
/
i
, y pulse
ENTER (
).
Cuando conecte un máximo de dos
dispositivos, se mostrará como previamente.
6. Seleccione un archivo con
U
/
u
/
I
/
i
, y
pulse
B
PLAY o ENTER (
) para reproducir
el archivo.
NOTA
Las funciones de reproducción descritas en este
manual no siempre están disponibles en todos
los archivos y dispositivos. Algunas funciones
pueden estar restringidas por muchos factores.
Dependiendo de los títulos de BD-ROM es
posible que sea necesaria una conexión de
dispositivo USB para una correcta reproducción.
4
Funcionamiento
HB985-DB.BDEUPPK_SPA.indd 40HB985-DB.BDEUPPK_SPA.indd 40 2010-05-14  2:48:342010-05-14  2:48:34
41Funcionamiento
4
Funcionamiento
Para detener la reproducción
Pulse
x
STOP durante la reproducción.
Para hacer una pausa
Pulse
X
PAUSE/STEP durante la reproducción.
Pulse
B
PLAY para reanudar la reproducción.
Para reproducir fotograma a
fotograma
Pulse
X
PAUSE/STEP durante la reproducción
de películas.
Pulse
X
PAUSE/STEP repetidamente para
reproducir fotograma a fotograma.
Para buscar hacia delante o hacia
atrás
Pulse
m
o
M
durante la reproducción
para avanzar rápidamente o retroceder
rápidamente.
Puse
m
o
M
varias veces para cambiar
entre las distintas velocidades de reproducción.
Para reducir la velocidad de
reproducción
Mientras que la reproducción está en pausa,
pulse varias veces
M
para reproducir a varias
velocidades de cámara lenta.
Para saltar al capítulo/pista/archivo
siguiente/anterior
Durante la reproducción, pulse
.
o
>
para ir al siguiente capítulo/pista/archivo o
para volver al principio del capítulo/pista/
archivo actual.
Pulse
.
dos veces brevemente para volver
al capítulo/pista/archivo anterior.
Utilización del menú del disco
BD
DVD
AVCHD
Para visualizar el menú del disco
La pantalla de menús puede aparecer la
primera vez después de cargar un disco que
contenga un menú. Si desea visualizar el menú
del disco durante la reproducción, pulse MENU.
Utilice
U
/
u
/
I
/
i
para navegar a través de las
opciones del menú.
Para mostrar el menú desplegable
Algunos discos BD-ROM contienen un menú
desplegable que se muestra durante la
reproducción.
Pulse POPUP/ TOP MENU durante la
reproducción y utilice los botones
U
/
u
/
I
/
i
para navegar por las opciones del menú.
Reanudar la reproducción
BD
DVD
AVCHD
MOVIE
ACD
MUSIC
La unidad graba a partir del punto en el que
pulsó
x
STOP dependiendo del disco.
Si aparece en la pantalla durante unos
instantes “
Xx
(Resume Stop)” pulse
B
PLAY
para reanudar la reproducción (desde el punto
de la escena).
Si pulsa dos veces
x
STOP o extrae el disco,
aparece en pantalla,
x
”(parada completa). La
unidad eliminará el punto donde se detuvo.
NOTA
El punto de reanudación podría eliminarse si se
pulsa un botón (por ejemplo:;
1
(POWER),
Z
(OPEN/CLOSE), etc).
La función de reanudación no está operativa
para discos BD-Video con BD-J.
Si pulsa una vez
x
(STOP) durante la reproducción
de títulos interactivos de BD-ROM, la unidad
entrará en el modo de parada completa.
HB985-DB.BDEUPPK_SPA.indd 41HB985-DB.BDEUPPK_SPA.indd 41 2010-05-14  2:48:342010-05-14  2:48:34
42 Funcionamiento
Funcionamiento
4
Reproducción
avanzada
Reproducción repetida
BD
DVD
AVCHD
ACD
MUSIC
Durante la reproducción, pulse varias veces
REPEAT (
) para seleccionar el modo de
repetición deseado.
BD/DVD
A-
– El segmento seleccionado se repetirá
de forma continua.
Capítulo
– El capítulo actual se
reproducirá de forma repetitiva.
Título
– El título actual se reproducirá de
forma repetitiva.
Para volver a la reproducción normal, pulse
REPEAT (
) repetidamente para
seleccionar [Apagado].
Archivos de música/CDs de audio
– La pista actual o el archivo se
reproducirá de forma repetitiva.
Todas las pistas o archivos se
reproducirán de forma repetitiva.
– Las pistas o archivos se reproducirán
en orden aleatorio.
Todas las pistas o archivos se
reproducirán de forma repetitiva y en orden
aleatorio.
– El segmento seleccionado se
repetirá de forma continua. (Sólo CD de
audio)
Para volver a la reproducción normal, pulse
CLEAR.
NOTA
Si pulsa una vez
>
durante la reproducción
repetida de capítulo/pista se cancelará la
reproducción repetida.
Esta función puede que no funcione en algunos
discos o títulos.
Repetir una parte concreta
BD
DVD
AVCHD
ACD
Este reproductor permite repetir la parte que
haya seleccionado.
1.
Mientras se reproduce, pulse REPEAT ( )
para seleccionar [A-] al comienzo de la
parte que quiera repetir. Y después, pulse
ENTER ( ).
2. Pulse ENTER ( ) el  na de la parte. El
segmento seleccionado se repetirá de
forma continua.
3. Para volver a la reproducción normal, pulse
REPEAT
( ) varias veces para seleccionar
[OFF] o pulse CLEAR.
NOTA
No puede seleccionar un segmento inferior a 3
segundos.
HB985-DB.BDEUPPK_SPA.indd 42HB985-DB.BDEUPPK_SPA.indd 42 2010-05-14  2:48:342010-05-14  2:48:34
43Funcionamiento
4
Funcionamiento
Búsqueda por marcador
BD
DVD
AVCHD
MOVIE
Puede comenzar la reproducción desde un
máximo de nueve puntos memorizados.
Para introducir un marcador
1. Durante la reproducción, pulse MARKER en
el punto que desee. El icono Marker aparece
brevemente en la pantalla del televisor.
2. Repita el paso 1 para agregar hasta nueve
marcadores.
Para recuperar una escena marcada
1. Pulse SEARCH y aparecerá el menú de
búsqueda en la pantalla.
2. Pulse un botón numérico para seleccionar
el número de marcador que desee
recuperar. La reproducción comenzará
desde la escena marcada.
Para eliminar un marcador
1. Pulse SEARCH y aparecerá el menú de
búsqueda en la pantalla.
2. Pulse
u
para resaltar un número de
marcador. Utilice
I
/
i
para seleccionar una
escena marcada que desea eliminar.
3. Pulse CLEAR y la escena marcada se borrará
del menú de búsqueda.
NOTA
Puede que esta función no esté operativa para
algunos discos, títulos, capacidad del servidor.
Todos los puntos marcados se borran si el
título está en modo de parada completa (
x
) se
cambia el título o si se expulsa el disco.
Esta función no está disponible si la duración
total del título es inferior a 10 segundos.
Usar el menú de búsqueda
BD
DVD
AVCHD
MOVIE
Con el menú de búsqueda, es posible
encontrar fácilmente el punto a partir del cual
se desea iniciar la reproducción.
Para buscar un punto
1. Durante la reproducción, pulse SEARCH
para mostrar el menú de búsqueda.
2. Pulse
I
/
i
para avanzar o retroceder
la reproducción 15 segundos. Puede
seleccionar un punto hasta el que avanzar o
retroceder manteniendo pulsado el botón
I
/
i
.
HB985-DB.BDEUPPK_SPA.indd 43HB985-DB.BDEUPPK_SPA.indd 43 2010-05-14  2:48:352010-05-14  2:48:35
44 Funcionamiento
Funcionamiento
4
Para iniciar la reproducción de una
escena marcada
1. Pulse SEARCH y aparecerá el menú de
búsqueda en la pantalla.
2. Pulse
u
para resaltar un número de
marcador. Utilice
I
/
i
para seleccionar
una escena marcada que desea empezar a
reproducir.
3. Pulse ENTER ( ) para iniciar la reproducción
a partir de la escena marcada.
NOTA
Puede que esta función no esté operativa para
algunos discos, títulos, servidor.
Puede que esta función no esté operativa para
cierto contenido [Enlace principal] según el tipo
de archivo y la capacidad del servidor DLNA.
Memoria de la última escena
BD
DVD
Esta unidad memoriza la última escena
del último disco que se haya visionado. La
última escena visualizada permanece en
memoria incluso si retira el disco de la unidad
o apaga la unidad. Si carga un disco con
la escena memorizada, ésta se recuperará
automáticamente.
NOTA
La función de memoria de un disco anterior se
borrará al reproducir un disco diferente.
Esta función puede no funcionar dependiendo
del disco.
Esta unidad no memoriza los ajustes de un
disco si apaga la unidad antes de comenzar la
reproducción.
Visualización en
pantalla
Es posible visualizar y ajustar diversa
información y ajustes sobre el contenido.
Visualización en pantalla de la
información del contenido
BD
DVD
AVCHD
MOVIE
1. Durante la reproducción pulse DISPLAY
(
) para mostrar diversa información sobre
la reproducción.
a
h
g
f
e
d
c
b
a
Título – número del título actual/número
total de títulos
b
Capítulo – Número del capítulo actual/
número total de capítulos.
c
Tiempo – tiempo de reproducción
transcurrido/tiempo total de
reproducción
d
Audio – Idioma o canal de audio
seleccionado.
e
Subtítulo – Subtítulos seleccionados.
f
Angulo – Ángulo seleccionado/número
total de ángulos.
HB985-DB.BDEUPPK_SPA.indd 44HB985-DB.BDEUPPK_SPA.indd 44 2010-05-14  2:48:352010-05-14  2:48:35
45Funcionamiento
4
Funcionamiento
g
Aspecto TV – relación de aspecto de TV
seleccionado
h
Modo de imagen – modo de imagen
seleccionada
2. Seleccione una opción con
U
/
u
.
3. Utilice
I
/
i
para ajustar el valor de la opción
seleccionada.
4. Pulse RETURN (
O
) para salir de la
visualización en pantalla.
NOTA
Si durante unos segundos no pulsa ningún
botón, la visualización de la pantalla
desaparecerá.
En algunos discos no puede seleccionarse un
número de título.
Las opciones disponibles podrán variar en
función del disco o título.
Si se está reproduciendo un título interactivo BD,
se mostrará información de con guración en la
pantalla, pero no permitirá cambiarla.
Reproducir a partir del tiempo
seleccionado
BD
DVD
AVCHD
MOVIE
1. Presione DISPLAY (
) durante la
reproducción. El cuadro de búsqueda de
tiempo muestra el tiempo de reproducción
transcurrido.
2. Seleccione la opción [Tiempo] e introduzca
el tiempo de inicio deseado en horas,
minutos y segundos, de izquierda a
derecha.
Por ejemplo, para buscar una escena a
las 2 horas, 10 minutos y 20 segundos,
introduzca “21020”.
Pulse
I
/
i
para avanzar o retroceder la
reproducción 60 segundos.
3. Pulse ENTER (
) para iniciar la reproducción
a partir del tiempo seleccionado.
NOTA
Esta función puede no funcionar en algunos
discos o títulos.
Puede que esta función no esté operativa para
cierto contenido [Enlace principal] dependiendo
del tipo de archivo y la capacidad del servidor
DLNA.
HB985-DB.BDEUPPK_SPA.indd 45HB985-DB.BDEUPPK_SPA.indd 45 2010-05-14  2:48:352010-05-14  2:48:35
46
Funcionamiento
Funcionamiento
4
Escuchar un audio diferente
BD
DVD
AVCHD
MOVIE
1. Durante la reproducción, pulse
DISPLAY (
) para mostrar la visualización en
pantalla.
2. Utilice
U
/
u
para seleccionar la opción
[Audio].
3. Utilice
I
/
i
para seleccionar el idioma de
audio, pista de audio o canal de audio que
desee.
NOTA
Algunos discos le permiten cambiar las opciones
de audio sólo con el menú del disco. De ser así,
pulse el botón POPUP/ TOP MENU o MENU y
elija el audio adecuado desde las selecciones en
el menú del disco.
Nada más cambiar el sonido, se producirá una
discrepancia temporal entre el sonido actual y el
visualizado.
Seleccionar el idioma de los
subtítulos
BD
DVD
AVCHD
MOVIE
1. Durante la reproducción, pulse
DISPLAY (
) para mostrar la visualización en
pantalla.
2. Utilice
U
/
u
para seleccionar la opción
[Subtítulo].
3. Utilice
I
/
i
para seleccionar el idioma de
subtítulos deseado.
4. Pulse RETURN (
O
) para salir de la
visualización en pantalla.
NOTA
Algunos discos le permiten cambiar la selección
de subtítulos mediante el menú del disco. Si este
es el caso, pulse el botón POPUP/ TOP MENU o
MENU y seleccione el subtítulo adecuado entre las
opciones del menú del disco.
HB985-DB.BDEUPPK_SPA.indd 46HB985-DB.BDEUPPK_SPA.indd 46 2010-05-14  2:48:352010-05-14  2:48:35
47
Funcionamiento
4
Funcionamiento
Visualizar desde un ángulo
diferente
BD
DVD
Durante la reproducción, si el disco contiene
escenas grabadas desde diferentes ángulos de
cámara, puede cambiar a un ángulo de cámara
diferente.
1. Durante la reproducción, pulse DISPLAY ( )
para mostrar la visualización en pantalla.
2. Utilice
U
/
u
para seleccionar la opción
[Angulo].
3. Utilice
I
/
i
para seleccionar el ángulo
deseado.
4. Pulse RETURN (
O
) para salir de la
visualización en pantalla.
Para cambiar la relación de
aspecto de TV
BD
DVD
AVCHD
MOVIE
Es posible cambiar el ajuste de la relación de
aspecto de TV durante la reproducción.
1. Durante la reproducción, pulse DISPLAY (
)
para mostrar la visualización en pantalla.
2. Utilice
U
/
u
para seleccionar la opción
[Aspecto TV].
3. Utilice
I
/
i
para seleccionar la opción
deseada.
4. Pulse RETURN (
O
) para salir de la
visualización en pantalla.
NOTA
Si cambia el valor de la opción [Aspecto TV] en
la visualización en pantalla, no se modi cará la
opción [Aspecto TV]] del menú [Con g.].
Para cambiar el modo de
imagen
BD
DVD
AVCHD
MOVIE
Es posible cambiar la opción
[Modo de imagen] durante la reproducción.
1. Durante la reproducción, pulse DISPLAY (
)
para mostrar la visualización en pantalla.
2. Utilice
U
/
u
para seleccionar la opción
[Modo de imagen].
3. Utilice
I
/
i
para seleccionar la opción
deseada.
4. Pulse RETURN (
O
) para salir de la
visualización en pantalla.
Ajuste de la opción [Conf. usuario]
1. Durante la reproducción, pulse DISPLAY ( )
para mostrar la visualización en pantalla.
2. Utilice
U
/
u
para seleccionar la opción
[Modo de imagen].
3. Utilice
I
/
i
para seleccionar la opción
[Conf. usuario] y pulse ENTER (
).
4. Utilice
U
/
u
/
I
/
i
para ajustar las opciones
[Modo de imagen].
Seleccione la opción [Predeterm.] y, a
continuación, pulse ENTER ( ) para retear
todos los ajustes de vídeo.
5. Utilice
U
/
u
/
I
/
i
para seleccionar las
opciones [Cerrar] y pulse ENTER (
) para
nalizar la con guración.
HB985-DB.BDEUPPK_SPA.indd 47HB985-DB.BDEUPPK_SPA.indd 47 2010-05-14  2:48:352010-05-14  2:48:35
48
Funcionamiento
Funcionamiento
4
Disfrutar de BD-LIVE
Esta unidad le permite disfrutar de funciones
tales como imagen secundaria (PIP), audio
secundario y paquetes virtuales, etc… con
BD-Video que admite BONUSVIEW (BD-ROM
versión 2 Per l 1 versión 1.1/ Per l de estándar
nal).
Es posible reproducir audio y vídeo secundario
desde un disco compatible con la función
Picture-in-Picture. Para más información sobre
el método de reproducción, consulte las
instrucciones del disco.
Además de la función BONUSVIEW, el BD-
Video, con compatibilidad con BD-LIVE (BD-
ROM versión 2 per l 2) y función de ampliación
de red, le permite disfrutar de más funciones
como la descarga de trailers de películas
nuevas mediante la conexión de esta unidad a
Internet.
1. Compruebe la conexión de red y los ajustes
(páginas 28-30).
2. Inserte en el panel frontal un dispositivo de
almacenamiento USB en el puerto USB.
Para descargar contenido extra se necesita
un dispositivo de almacenamiento USB.
Conexión USB
3 . Pulse HOME MENU, y ajuste la opción
[Conexión BD-LIVE] en el menú [Con g.]
(página 37).
Dependiendo del disco, la función BD-LIVE
puede no utilizarse si la opción [Conexión
BD-LIVE] está con gurada como [Permiso
parcial].
4 . Inserte un BD-ROM con BD-LIVE.
Las operaciones podrán variar en función
del disco. Consulte el manual suministrado
con el disco.
NOTA
No extraiga el dispositivo USB conectado
mientras se está descargando contenido o si hay
un disco Blu-ray en la bandeja de discos. Hacerlo
podría dañar el dispositivo USB conectado y las
características de BD-LIVE podrían no funcionar
correctamente nunca más con el dispositivo
USB dañado. Si el dispositivo USB conectado
parece dañado, puede formatearlo desde el PC y
reusarlo con el reproductor.
Algunos contenidos BD-LIVE podrían tener
acceso restringido en algunas áreas por decisión
propia del proveedor de contenidos.
Puede que se tarde unos minutos en cargar y
comenzar a disfrutar del contenido de BD-LIVE.
HB985-DB.BDEUPPK_SPA.indd 48HB985-DB.BDEUPPK_SPA.indd 48 2010-05-14  2:48:352010-05-14  2:48:35
49
Funcionamiento
4
Funcionamiento
Reproducción de
archivos de vídeo y
discos VR
Es posible reproducir discos DVD-RW grabados
en formato de grabación de vídeo (VR) y
archivos de vídeo almacenados en un disco o
dispositivo USB.
1. Pulse
HOME MENU.
2. Seleccione [Película] con
U
/
u
/
I
/
i
, y pulse
ENTER ( ).
3. Seleccione el dispositivo utilizando
I
/
i
, y
pulse ENTER ( ).
Cuando conecte un máximo de dos
dispositivos, se mostrará como previamente.
4. Seleccione un archivo con los botones
U
/
u
/
I
/
i
, y pulse
B
PLAY o ENTER ( ) para
reproducir el archivo.
NOTA
Los requisitos del archivo se describen en la
página 11.
Puede usar varias funciones de reproducción.
Véanse las páginas 40-47.
Los discos de formato DVD-VR sin  nalizar no
podrán reproducirse en esta unidad.
Algunos discos DVD-VR se hacen con datos
CPRM mediante una DVD RECORDER. Esta
unidad no admite estos tipos de disco.
¿Qué es el CPRM?
CPRM es un sistema de protección anticopia
(con sistema codi cado) que permite solamente
la grabación de programas de emisión “una sola
copia. CPRM signi ca Protección de contenido
para medios grabables.
HB985-DB.BDEUPPK_SPA.indd 49HB985-DB.BDEUPPK_SPA.indd 49 2010-05-14  2:48:352010-05-14  2:48:35
50
Funcionamiento
Funcionamiento
4
Seleccionar un archivo de
subtítulos
MOVIE
En el caso de que coincida el nombre de un
archivo de vídeo y el nombre del archivo de
subtítulos, se reproducirá automáticamente el
archivo de subtítulos al reproducir el archivo
de vídeo.
Si el nombre del archivo de subtítulos es
diferente del nombre del archivo de película,
tendrá que seleccionar el archivo de subtítulos
en el menú [Película] antes de reproducir la
película.
1. Utilice
U
/
u
/
I
/
i
para seleccionar el archivo
de subtítulos que desea reproducir en el
menú [Película].
2. Pulse ENTER (
).
Pulse ENTER ( ) de nuevo para
deseleccionar el archivo de subtítulos.
El archivo de subtítulos seleccionado se
mostrará al reproducir el archivo de vídeo.
NOTA
Si pulsa la tecla
x
(STOP) durante la
reproducción, se cancelará la selección de
subtítulos.
Esta función puede no funcionar en la función
[Enlace principal].
Para cambiar la página del
código de subtítulos
MOVIE
Si los subtítulos no se visualizan correctamente,
se puede cambiar la página del código de
subtítulos para ver el archivo de subtítulos
correctamente.
1. Durante la reproducción, pulse DISPLAY (
)
para mostrar la visualización en pantalla.
2. Utilice
U
/
u
para seleccionar la opción
[Página de código].
3. Utilice
I
/
i
para seleccionar la opción del
código deseada.
4. Pulse RETURN (
O
) para salir de la
visualización en pantalla.
HB985-DB.BDEUPPK_SPA.indd 50HB985-DB.BDEUPPK_SPA.indd 50 2010-05-14  2:48:362010-05-14  2:48:36
51
Funcionamiento
4
Funcionamiento
Ver una fotografía
Es posible visualizar archivos de fotos con este
reproductor.
1. Pulse
HOME MENU
2. Seleccione [Foto] con
I
/
i
, y pulse
ENTER ( ).
3. Seleccione el dispositivo utilizando
I
/
i
, y
pulse ENTER ( ).
Cuando conecte un máximo de dos
dispositivos, se mostrará como previamente.
4. Seleccione un archivo usando
U
/
u
/
I
/
i
y
pulse ENTER (
) para ver la fotografía.
Para reproducir una presentación de
diapositivas
Pulse
B
(PLAY) para iniciar la presentación de
diapositivas.
Para detener una presentación de
diapositivas
Pulse
x
(STOP) durante la presentación de
diapositivas.
Para hacer una pausa en una
presentación de diapositivas
Pulse
X
PAUSE/STEP durante la presentación
de diapositivas.
Pulse
B
PLAY para volver a iniciar la
presentación.
Para saltar a la foto anterior/siguiente
Mientras ve una foto en pantalla completa,
pulse
I
o
i
para ir a la foto anterior o siguiente.
NOTA
Los requisitos del archivo se describen en la
página 11.
Puede usar varias funciones de reproducción.
Véanse las páginas 40-47.
HB985-DB.BDEUPPK_SPA.indd 51HB985-DB.BDEUPPK_SPA.indd 51 2010-05-14  2:48:362010-05-14  2:48:36
52
Funcionamiento
Funcionamiento
4
Opciones durante la
visualización de una foto
Puede utilizar varias opciones mientras
visualiza una foto en pantalla completa.
1. Mientras ve una foto en pantalla completa,
pulse DISPLAY (
) para mostrar el menú de
opciones.
2. Seleccione una opción con
U
/
u
.
a
g
f
e
d
c
b
h
a
Foto actual/número total de fotos
Utilice
I
/
i
para visualizar la foto anterior/
siguiente.
b
Diapositivas – Pulse ENTER (
) para
iniciar o pausar la presentación en
diapositivas.
c
Selec música – Seleccione la música de
fondo para la presentación de diapositivas.
d
Música –Pulse ENTER (
) para iniciar o
hacer una pausa en la música de fondo.
e
Rotar – Pulse ENTER (
) para girar la foto
en sentido horario.
f
Zoom – Pulse ENTER (
) para visualizar el
menú [Zoom].
g
Efecto – Utilice
I
/
i
para seleccionar un
efecto de transición entre fotos en una
presentación de diapositivas.
h
Velocidad – Utilice
I
/
i
para seleccionar
un efecto de transición entre fotos en una
presentación de diapositivas.
3. Pulse RETURN (
O
) para salir del menú de
opciones.
Escuchar música mientras se
muestran diapositivas
Puede mostrar archivos de fotografías mientras
escucha archivos de música.
1.
Pulse HOME MENU
2. Seleccione [Foto] o [Enlace principal]
utilizando
U
/
u
/
I
/
i
, y pulse ENTER ( ).
3. Seleccione la opción [Disco] o [USB] con
I
/
i
, y pulse ENTER ( ).
La selección de un servidor o una carpeta
de recursos compartidos es necesaria para
el menú [Enlace principal].
4. Seleccione un archivo usando
U
/
u
/
I
/
i
, y
pulse ENTER ( ) para ver la fotografía.
5. Pulse DISPLAY ( ) para visualizar el menú
de opciones.
6. Utilice
U
/
u
para seleccionar la opción [Selec
música] y pulse ENTER ( ) para mostrar el
menú [Selec música].
HB985-DB.BDEUPPK_SPA.indd 52HB985-DB.BDEUPPK_SPA.indd 52 2010-05-14  2:48:362010-05-14  2:48:36
53
Funcionamiento
4
Funcionamiento
7. Utilice
U
/
u
para seleccionar un dispositivo
y pulse ENTER. ( ).
Los dispositivos que pueden seleccionarse
di eren dependiendo de la ubicación del
archivo de fotografías que se muestra en
pantalla completa.
Ubicación de la
fotografía
Dispositivo
disponible
Disco Disco, USB
USB Disco, USB
Carpeta
compartida en su
PC (CIFS)
CIFS
Servidor DLNA Servidor DLNA
8. Utilice
U
/
u
para seleccionar un archivo o
una carpeta que desee reproducir.
Seleccione una carpeta y pulse ENTER ( )
para mostrar el directorio inferior.
Seleccione y pulse ENTER ( ) para
mostrar el directorio superior.
NOTA
Al seleccionar música de [Enlace principal], la
selección de carpeta no estará disponible.
En [Enlace principal] sólo está disponible la
selección de archivos.
9. Utilice
i
para seleccionar [OK] y pulse
ENTER ( ) para completar la selección de la
música.
Escuchar música
El reproductor puede reproducir CD de audio y
archivos de música.
1. Pulse
HOME MENU
2. Seleccione [Música] con
U
/
u
/
I
/
i
, y pulse
ENTER ( ).
3. Seleccione el dispositivo utilizando
I
/
i
, y
pulse ENTER ( ).
Cuando conecte un máximo de dos
dispositivos, se mostrará como previamente.
4. Seleccione un archivo de música o pista
de audio con
U
/
u
/
I
/
i
, y pulse ENTER ( )
para escuchar la música.
NOTA
Los requisitos del archivo se describen en la
página 11.
Puede usar varias funciones de reproducción.
Véanse las páginas 40-47.
HB985-DB.BDEUPPK_SPA.indd 53HB985-DB.BDEUPPK_SPA.indd 53 2010-05-14  2:48:372010-05-14  2:48:37
54
Funcionamiento
Funcionamiento
4
Grabación de CD de audio
Es posible grabar una pista o todas las pistas
que desee de un CD de audio hasta un
dispositivo de almacenamiento USB.
1. Inserte en el panel frontal un dispositivo de
almacenamiento USB en el puerto USB.
2. Pulse
Z
(OPEN/CLOSE) y coloque un CD de
audio en la bandeja de discos.
Pulse
Z
(OPEN/CLOSE) para cerrar la
bandeja de discos. La reproducción se inicia
automáticamente.
3. Pulse DISPLAY ( ) para visualizar el menú
de opciones.
O
Pulse el botón
z
USB REC en el mando a
distancia.
Puede grabar toda la música en el CD de
audio.
4. Utilice
U
/
u
para seleccionar la opción
[Grabación de CD] y pulse ENTER (
) para
mostrar el menú [Grabación de CD].
Repita este paso para seleccionar tantas
pistas como pueda.
5.
Utilice
U
/
u
para seleccionar la pista que
desea copiar en el menú, y pulse ENTER ( ).
Repita este paso para seleccionar tantas
pistas como pueda.
Selecciona todas las pistas de un
CD de audio.
Selecciona una opción
de codi cación del menú
desplegable (128 kbps, 192 kbps,
320 kbps o sin pérdidas).
Cancela la grabación y vuelve a
la pantalla anterior.
6. Utilice
U
/
u
/
I
/
i
para seleccionar [Inicio] y
pulse ENTER (
).
7. Utilice
U
/
u
/
I
/
i
para seleccionar la carpeta
de destino a la que desea copiar.
Si desea crear una carpeta nueva, utilice
U
/
u
/
I
/
i
para seleccionar [Nueva carpeta]
y pulse ENTER ( ).
Introduzca un nombre de carpeta con el
teclado virtual, y pulse ENTER ( ) mientras
[OK] está seleccionado.
8. Utilice
U
/
u
/
I
/
i
para seleccionar [OK] y
pulse ENTER (
) para iniciar la grabación
del CD de audio.
Si desea detener la grabación de un CD de
audio, pulse ENTER ( ) mientras [Cancelar]
se ilumina.
9. Aparecerá un mensaje cuando se haya
completado la grabación del CD de audio.
Pulse ENTER (
) para comprobar el archivo
de música creado en la carpeta de destino.
HB985-DB.BDEUPPK_SPA.indd 54HB985-DB.BDEUPPK_SPA.indd 54 2010-05-14  2:48:372010-05-14  2:48:37
55
Funcionamiento
4
Funcionamiento
NOTA
La siguiente tabla muestra el promedio de
tiempo de grabación de una pista de audio
con 4 minutos de tiempo de reproducción a
un archivo de música con 192 kbps a modo de
ejemplo.
Modo de parada Durante la
reproducción
1,4 min. 2 min.
Todos los tiempos de la tabla anterior son
aproximados.
El tiempo de extracción real para el dispositivo
de almacenamiento USB varía dependiendo de
la capacidad del dispositivo de almacenamiento
USB.
Asegúrese de que hay un mínimo de 50 MB de
espacio libre cuando se graba en el dispositivo
de almacenamiento USB.
La duración de la música debe superar los 20
segundos para obtener un registro adecuado.
No apague el reproductor ni extraiga el
dispositivo de almacenamiento USB conectado
durante la grabación del CD de audio.
La realización de copias no autorizadas de material
protegido contra copias, incluyendo los programas
informáticos, archivos, emisiones o grabaciones
de audio, puede infringir los derechos de autor y
como tal constituir una ofensa criminal.
Este equipo no deberá utilizarse con dichos  nes.
Sea responsable
Respete los derechos de autor
HB985-DB.BDEUPPK_SPA.indd 55HB985-DB.BDEUPPK_SPA.indd 55 2010-05-14  2:48:372010-05-14  2:48:37
56
Funcionamiento
Funcionamiento
4
Reproducción de iPod
Puede disfrutar del sonido desde su iPod. Para
más información sobre el iPod, consulte la Guía
de usuario del iPod.
Preparación
Para ver los vídeos y las fotos del iPod en la
pantalla del TV.
- Asegúrese de utilizar la conexión de vídeo
a través de la toma de salida de vídeo en
el panel trasero de la unidad. Seleccione el
modo de entrada de vídeo apropiado en el
TV.
- Dependiendo del iPod, asegúrese de
seleccionar Vídeos > Ajustes de vídeo y
después, con gure la Salida del TV en Ask
(Preguntar) o en On (Activado), desde
el iPod. Para más información sobre los
Ajustes del vídeo, consulte la Guía de
usuario del iPod.
- La visualización de fotos está disponible
sólo si esta unidad está en el modo de
entrada de iPod y le permite ver fotos sólo
a modo de presentación. Debe empezar
una presentación en su iPod para ver una
foto en un TV. Para más información sobre
la con guración de diapositivas, consulte
la Guía de usuario del iPod.
Antes de conectar el iPod, desactive esta
unidad y baje el volumen al mínimo.
1. Conecte el iPod  rmemente.
Conecte el iPod
Conecte el cradle y
coloque el iPod sobre él.
2. Seleccione un archivo usando
U
/
u
/
I
/
i
, y
pulse ENTER (
) para reproducir el archivo.
Disfrutar del iPod en la pantalla
1. Conecte el iPod  rmemente.
2. Pulse HOME MENU ( ).
3. Seleccione [Música] o [Película] utilizando
I
/
i
, y pulse ENTER ( ).
Si había conectado otro dispositivo (CD o
USB), seleccione el iPod en el menú.
4. Seleccione un archivo usando
U
/
u
/
I
/
i
, y
pulse ENTER (
) para reproducir el archivo.
HB985-DB.BDEUPPK_SPA.indd 56HB985-DB.BDEUPPK_SPA.indd 56 2010-05-14  2:48:372010-05-14  2:48:37
57
Funcionamiento
4
Funcionamiento
Disfrutar del iPod en el modo
iPod IN (ENTRADA iPod)
Puede utilizar el iPod usando el control remoto
y los controles del iPod.
1. Conecte el iPod  rmemente.
Al encender la unidad, el iPod se encenderá
automáticamente y comenzará a cargarse.
2. Pulse INPUT/TUNER para seleccionar el
modo iPod IN.
U
/
u
/
I
/
i
Selecciona una opción en el
menú.
B
/ENTER
Inicia la reproducción de
música o vídeos.
X
Se detiene en pausa durante la
reproducción. Para reanudar la
reproducción, pulse
B
(PLAY)
de nuevo.
m
/
M
Avanza o retrocede rápido una
canción o vídeo.
.
/
>
Omite la reproducción
pasando hacia delante o hacia
atrás.
REPEAT Permite seleccionar el modo
de repetición deseado: Pista
( )
, Todos
( )
, Desactivado
(Sin pantalla).
NOTA
Este sistema es compatible con audio y video de
iPod (4 generación), iPod nano, iPod classic, iPod
mini, iPouch touch y iPhone.
(No es compatible con iPod shu e)
NOTA
Aparece un mensaje de error “REVISAR IPOD
o “Modelo iPod conectado no compatible,
cuando:
- su iPod no está disponible para la función a
accionar.
Aparece un mensaje de error “REVISAR IPOD o
Actualizar software de iPod”, cuando:
- su iPod tiene una versión de software obsoleta.
t
Actualice el software de su iPod a la versión
más reciente.
Si esta unidad muestra un mensaje de error, siga
dicho mensaje. Aparece un mensaje de error
“REVISAR IPOD” o “Revisar su iPod”, cuando:
- la comunicación entre esta unidad y su iPod no
se establece correctamente.
t
Acople y desacople su iPod a esta unidad.
- su iPod no está conectado correctamente.
- esta unidad clasi ca a su iPod como un
dispositivo desconocido.
- su iPod tiene muy poca carga de energía.
t
Debe cargar la batería.
t
Si carga la batería cuando el iPod ya
tiene muy poca cantidad, tardará más en
completar la carga.
Debe utilizar el adaptador de acople que se
facilita con su iPod para el uso estable de este
dispositivo. Si necesita un adaptador, consulte al
proveedor de su iPod.
La compatibilidad con su iPod puede variar
dependiendo de tipo de iPod.
Los iPod touch y iPhone funcionan de modo
diferente a cualquier otro iPod.
Pueden necesitarse controles adicionales para
su utilización con esta unidad (por ejemplo,
deslizar para desbloquear”).
Si utiliza una aplicación, realiza una llamada o
envía o recibe un mensaje de texto SMS, etc. en
su iPod táctil o iPhone, desconéctelo del acople
del iPod de esta unidad y después utilícelo.
Dependiendo de la versión de software de su
iPod, puede que no consiga controlar el iPod
desde esta unidad. Recomendamos que instale
la última versión del software.
La calidad del vídeo depende de las fuentes de
vídeo de su iPod.
Si tiene algún problema con su iPod,
consulte:www.apple.com/support/ipod.
HB985-DB.BDEUPPK_SPA.indd 57HB985-DB.BDEUPPK_SPA.indd 57 2010-05-14  2:48:382010-05-14  2:48:38
58
Funcionamiento
Funcionamiento
4
Funcionamiento de la
radio
Asegúrese de que la antena está conectada.
(Consulte la página 24)
Cómo escuchar la radio
1. Pulse INPUT/TUNER hasta que aparezca
TUNER (FM) en la pantalla de visualización.
Se sintoniza la última emisora recibida.
2. Mantenga pulsado TUNE (-/+) durante unos
dos segundos hasta que la indicación de
frecuencia empiece a cambiar. La búsqueda
se detiene cuando la unidad sintoniza una
emisora. O Pulse TUNE (-/+) varias veces.
3. Ajuste el volumen girando VOLUME en el
panel frontal o pulsando VOL (+/-) en el
mando a distancia.
Presintonización de las
emisoras de radio
Puede memorizar 50 emisoras de FM. Antes
de sintonizar, asegúrese de que ha bajado el
volumen.
1. Pulse INPUT/TUNER hasta que aparezca
TUNER (FM) en la pantalla de visualización.
2. Seleccione la frecuencia deseada mediante
TUNE (-/+).
3. Un número de presintonía parpadeará en la
pantalla.
4. Pulse PRESET para seleccionar el número de
presintonía que desea.
5. Pulse ENTER (
). Se memorizará la emisora.
6. Repita los pasos 2 a 5 para memorizar otras
emisoras.
Eliminación de todas las
emisoras guardadas
Mantenga pulsado CLEAR durante dos
segundos. “Borrar todo parpadeará.
A continuación, se eliminarán todas las
emisoras guardadas.
Cómo mejorar una mala
recepción de emisiones en FM
Pulse el botón coloreado D (azul) (MONO/
STEREO) en el mando a distancia. Esto
cambiará el sintonizador de estéreo a mono y
normalmente mejorará la recepción.
Cómo obtener más información
acerca de una emisora de radio
El sintonizador de FM incorpora la función RDS
(Radio Data System). De esta forma obtendrá
información acerca de la emisora de radio que
está escuchando. Pulse RDS varias veces para
recorrer los distintos tipos de datos:
PS (nombre de la red de emisoras)
El nombre del canal aparecerá en
la pantalla.
PTY (tipo de programa)
El tipo de programa (por ejemplo,
Jazz o Noticias) aparecerá en la
pantalla.
RT (radio texto)
Un mensaje de texto que
contiene información especial
de la emisora. Este texto puede
desplazarse por la pantalla.
CT (fecha y hora)
Se muestran la fecha y la hora
según la transmisión de la
emisora.
HB985-DB.BDEUPPK_SPA.indd 58HB985-DB.BDEUPPK_SPA.indd 58 2010-05-14  2:48:382010-05-14  2:48:38
59
Funcionamiento
4
Funcionamiento
Reproducción de
contenidos a través de
la red doméstica
El reproductor puede examinar y reproducir
contenido en su ordenador y servidores de
medios con certi cación DLNA conectados a la
red doméstica.
Acerca de DLNA
Esta unidad es un reproductor de medios
digitales con certi cación DLNA que puede
mostrar y reproducir vídeo, fotos y música
desde el servidor de medios digitales
compatible con DLNA (ordenador y electrónica
de consumo).
La DLNA (Digital Living Network Alliance) es
una organización que abarca varios sectores
industriales como la electrónica de consumo,
la computación y las empresas de dispositivos
móviles. Digital Living proporciona a los
consumidores un medio para compartir
fácilmente medios digitales a través de una red
doméstica.
El logotipo de certi cación DLNA facilita la
búsqueda de productos que cumplen con
las directrices de interoperabilidad DLNA.
Esta unidad cumple con las directrices de
interoperabilidad DLNA v1.5.
Cuando se conecta a este reproductor un
ordenador que ejecuta software del servidor
DLNA u otros dispositivos compatibles con
DLNA, es posible que sea necesario efectuar
algunos cambios de con guración en el
software o dispositivos. Consulte el manual de
instrucciones del software o dispositivo para
obtener más información.
Acceso a un servidor de medios
DLNA
1. Revisar la conexión de red y los ajustes
(páginas 28-30).
2. Pulse
HOME MENU.
3. Seleccione [Enlace principal] con
U
/
u
/
I
/
i
,
y pulse ENTER (
).
4. Seleccione un servidor de medios DLNA de
la lista con
U
/
u
, y pulse ENTER ( ).
Si desea volver a explorar el servidor
de medios disponibles, pulse el botón
coloreado en verde (B).
NOTA
Puede que este reproductor necesite un permiso
del servidor, dependiendo del tipo de servidor de
medios.
5. Seleccione un archivo con
U
/
u
/
I
/
i
, y
pulse ENTER ( ) para reproducir el archivo.
HB985-DB.BDEUPPK_SPA.indd 59HB985-DB.BDEUPPK_SPA.indd 59 2010-05-14  2:48:382010-05-14  2:48:38
60
Funcionamiento
Funcionamiento
4
NOTA
Los requisitos del archivo se describen en la
página 11.
Puede usar varias funciones de reproducción.
Véanse las páginas 40-47.
Los requisitos de archivo de la página 11 no
siempre son compatibles. Puede que haya
algunas restricciones por las características del
archivo y la capacidad de servidor de medios.
La vista en miniatura de los archivos
reproducibles se puede mostrar en el menú
[Enlace principal], pero dichos archivos no se
pueden reproducir en el reproductor.
Si hay un archivo de música reprod
ucible en el
menú [Enlace principal], el reproductor se salta
el archivo y reproduce el archivo siguiente.
El nombre del archivo de subtítulos y el nombre
del archivo de la película han de coincidir y estar
en la misma carpeta.
La calidad de la reproducción y el
funcionamiento de [Enlace principal] puede
verse afectada por el estado de su red
doméstica.
Puede que no se puedan compartir
correctamente los archivos almacenados en
un dispositivo extraíble como una unidad USB,
unidad DVD, etc.
Acceso a una carpeta para
compartir desde el ordenador
1. Arranque el PC conectado a la red de área
local.
2. Comparta las carpetas con archivos de
vídeos, fotos o música que hay en el
ordenador.
3. Compruebe en el reproductor la conexión
de red y los ajustes (páginas 28-30).
4. Pulse
HOME MENU.
5. Seleccione [Enlace principal] con
U
/
u
/
I
/
i
,
y pulse ENTER (
).
6. Seleccione una carpeta para compartir de
la lista con
U
/
u
, y pulse ENTER (
).
Si desea volver a explorar los servidores
de medios disponibles, pulse el botón
coloreado en verde (B).
NOTA
Dependiendo de la carpeta que se vaya a
compartir, este reproductor puede necesitar el ID
de usuario de la red de entrada y la contraseña
para acceder a la carpeta.
7. Seleccione un archivo con
U
/
u
/
I
/
i
, y
pulse ENTER ( ) para reproducir el archivo.
HB985-DB.BDEUPPK_SPA.indd 60HB985-DB.BDEUPPK_SPA.indd 60 2010-05-14  2:48:382010-05-14  2:48:38
61
Funcionamiento
4
Funcionamiento
NOTA
Los requisitos del archivo se describen en la
página 11.
Puede usar varias funciones de reproducción.
Véanse las páginas 40-47.
La vista en miniatura de los archivos
reproducibles se puede mostrar en el menú
[Enlace principal], pero dichos archivos no se
pueden reproducir en el reproductor.
Si hay un archivo de música reproducible en el
menú [Enlace principal], el reproductor se salta
el archivo y reproduce el siguiente.
El nombre del archivo de subtítulos y el nombre
del archivo de la película han de coincidir y estar
en la misma carpeta.
La calidad de la reproducción y el
funcionamiento de [Enlace principal] puede
verse afectado por el estado de su red
doméstica.
Puede que no se puedan compartir
correctamente los archivos almacenados en
un dispositivo extraíble como una unidad USB,
unidad DVD, etc del ordenador.
Es posible que tenga algún problema de
conexión según el entorno de su PC.
Requisitos del PC
Windows ® XP (Service Pack 2 o superior),
Windows Vista ® (no es necesario Service
Pack)
Windows 7®
1,2 GHz Intel ® Pentium ® III o AMD Sempron
™ 2200 + procesadores
Entorno de red: Ethernet de 100 MB, WLAN
(IEEE 802.11b/g/n)
NOTA
Si utiliza Windows ® XP o Windows Vista ®, haga
clic en el siguiente enlace para obtener más
información sobre los ajustes para compartir
archivos.
HB985-DB.BDEUPPK_SPA.indd 61HB985-DB.BDEUPPK_SPA.indd 61 2010-05-14  2:48:382010-05-14  2:48:38
62
Funcionamiento
Funcionamiento
4
Introducción de un ID usuario y
contraseña de red
Dependiendo del entorno de su PC, puede
que tenga que introducir un ID de usuario y
contraseña de red para poder acceder a una
carpeta compartida.
1. El menú de teclado aparece
automáticamente si se solicitan el ID de
usuario de red y la contraseña.
2. Utilice
U
/
u
/
I
/
i
para seleccionar un
carácter y pulse ENTER ( ) en el menú de
teclado para con rmar su selección.
Para introducir una letra con acento,
seleccione la letra del conjunto de
caracteres ampliados.
Ejemplo: Seleccione “D y, a continuación,
pulse DISPLAY( ) para mostrar el grupo
de caracteres expandido. Utilice
I
/
i
para
seleccionar “D o “Ď y, a continuación, pulse
ENTER (
).
[Nítido] – Borrar todos los caracteres
introducidos.
[Espacio] – Insertar un espacio en la posición
del cursor.
[<–] – Eliminar el carácter anterior a la
posición del cursor.
[ABC / abc / #+-=&] – Cambiar la
con guración del menú del teclado a letras
mayúsculas, minúsculas o símbolos.
3. Cuando termine de introducir el ID de
usuario y contraseña de red, seleccione
[OK] con
U
/
u
/
I
/
i
y pulse ENTER (
) para
acceder a la carpeta.
El sistema recordará el ID de usuario y
contraseña de red después de acceder a la
carpeta. Si no desea que el sistema recuerde
el ID de usuario y contraseña de red,
pulse el botón coloreado en rojo (A) para
eliminar la marca de la casilla de veri cación
[Recordar] antes de acceder a la carpeta.
HB985-DB.BDEUPPK_SPA.indd 62HB985-DB.BDEUPPK_SPA.indd 62 2010-05-14  2:48:382010-05-14  2:48:38
63
Mantenimiento
5
Mantenimiento
Notas en los discos
Manipulación de discos
Nunca pegue papel ni cinta adhesiva en el
disco.
Guardar los discos
Tras la reproducción, guarde el disco en su
caja. No deje el disco expuesto a la luz directa
del sol o cerca de una fuente de calor; nunca
lo deje en un coche donde esté expuesto
directamente al sol.
Limpieza de discos
No utilice productos abrasivos como alcohol,
benceno, disolventes u otros productos
disponibles en el mercado. Evite igualmente
los pulverizadores antiestáticos pensados para
grabaciones de vinilo más antiguas.
Manejo de la unidad
Envío de la unidad
Guarde el embalaje original y los materiales
de empaquetado. Si necesita enviar la unidad,
para máxima protección, intente que el
embalaje sea similar al de salida de fábrica.
Mantener las super cies exteriores limpias.
Cuando esté cerca de la unidad, no utilice
productos volátiles como insecticidas.
No ejerza una presión excesiva cuando
limpie la unidad, a  n de evitar daños en la
super cie.
No deje que la unidad entre en contacto
con productos de plástico o goma durante
períodos prolongados.
Limpieza de la unidad
Para limpiar el reproductor, utilice un paño
suave y seco. Si las super cies están muy sucias,
utilice un paño ligeramente humedecido
con un detergente no agresivo. No utilice
productos fuertes como alcohol, benceno o
diluyentes ya que pueden dañar la super cie
de la unidad.
Mantenimiento de la unidad
La unidad es un dispositivo de precisión y alta
tecnología. Si las lentes ópticas o la unidad
del disco acumulan suciedad o presentan
desgaste, afectará a la calidad de la imagen.
Para información más detallada, consulte en el
centro de servicio autorizado más cercano.
5
Mantenimiento
HB985-DB.BDEUPPK_SPA.indd 63HB985-DB.BDEUPPK_SPA.indd 63 2010-05-14  2:48:392010-05-14  2:48:39
64
Resolución de problemas
Resolución de problemas
6
6
Resolución de problemas
General
La corriente no responde. Conecte el cable de alimentación a la fuente de corriente de
la pared.
La unidad no inicia la
reproducción.
Inserte un disco reproducible. (Revise el tiempo de disco, el
sistema de color y el código regional).
Coloque el disco en la posición correcta.
Coloque el disco correctamente en la bandeja para discos,
dentro de la guía.
Limpie el disco.
Cancele la función de clasi cación o cambia el nivel de
clasi cación.
El ángulo no se puede
cambiar.
En un vídeo DVD a reproducir no se graban múltiples
ángulos.
El idioma de los subtítulos
no se puede cambiar ni
desactivar.
En un vídeo DVD a reproducir no se graban los subtítulos.
No puede reproducir
archivos MP3/WMA/ JPEG/
DivX.
Los archivos no están codi cados en un formato que la
unidad puede reproducir.
La unidad no admite el códec del archivo de película.
El mando a distancia no
funciona correctamente.
El mando a distancia no está orientado hacia el sensor
remoto de la unidad.
El mando a distancia está demasiado lejos de la unidad.
Hay un obstáculo delante del mando a distancia y la unidad.
Las pilas del mando a distancia se han agotado.
HB985-DB.BDEUPPK_SPA.indd 64HB985-DB.BDEUPPK_SPA.indd 64 2010-05-14  2:48:392010-05-14  2:48:39
65
Resolución de problemas
6
Resolución de problemas
Imagen
No hay imagen. Seleccione el modo de entrada de vídeo apropiado en el
televisor de modo que la imagen de la unidad aparezca en la
pantalla del televisor.
Conecte  rmemente la conexión de vídeo.
Compruebe si [Conf. color HDMI] en el menú [Con g.] está
ajustado en el elemento adecuado según su conexión de
vídeo.
El televisor no es compatible con la resolución que ha
con gurado en el reproductor. Cambie la resolución a una
compatible con el televisor.
La toma HDMI OUT del reproductor está conectada a un
dispositivo DVI que no es compatible con la protección de
los derechos de autor.
Aparece ruido en la
imagen.
Está reproduciendo un disco grabado en un sistema de color
diferente al del televisor.
Ajuste la resolución que su televisor admita.
Sonido
No hay sonido o está
distorsionado.
La unidad está buscando, en movimiento lento o en el modo
de pausa.
El volumen del sonido es bajo.
Revise la conexión del cable del altavoz. (página 16)
HB985-DB.BDEUPPK_SPA.indd 65HB985-DB.BDEUPPK_SPA.indd 65 2010-05-14  2:48:392010-05-14  2:48:39
66
Resolución de problemas
Resolución de problemas
6
Red
La función BD-LIVE no
funciona.
Es posible que el almacenamiento USB que hay conectado
no tenga espacio su ciente. Conecte el almacenamiento USB
con al menos 1 GB de espacio libre.
Asegúrese de que la unidad está correctamente conectada
a la red de área local y pueda acceder a Internet (véase la
página 28).
Su velocidad de banda ancha puede que no sea lo
su cientemente rápida para usar las funciones BD-LIVE. Le
recomendamos que se ponga en contacto con su proveedor
de servicios Internet (ISP) y aumente la velocidad de banda
ancha.
La opción [Conexión BD-LIVE] del menú [Con g.] está
ajustada en [Prohibido]. Ajuste la opción en [Permitido].
El diseño y las especi caciones están sujetas a cambio sin previo aviso.
Actualizaciones
Esta información está disponible en la página web de Pioneer. Consulte la página web para más
información sobre la actualización o servicio de su reproductor de discos Blu-ray.
HB985-DB.BDEUPPK_SPA.indd 66HB985-DB.BDEUPPK_SPA.indd 66 2010-05-14  2:48:392010-05-14  2:48:39
67
Apéndice
7
Apéndice
Control de un televisor
con el mando a
distancia suministrado
Puede controlar su televisor PIONEER con los
botones siguientes.
Botones de
control del
televisor
Botón Funcionamiento
1
(TV Power)
Encender y apagar el
televisor.
INPUT
Cambiar la fuente de entrada
del televisor entre éste y
otras fuentes de entrada.
CH +/- Avanzar o retroceder por
los canales memorizados.
VOL +/- Ajustar el volumen del
televisor.
NOTA
Dependiendo de la unidad que se conecte, es
posible que no pueda controlar su televisor con
alguno de los botones.
Con guración del mando a
distancia para el televisor
Puede utilizar el televisor con el mando a
distancia incluido.
Si el televisor se encuentra en la lista siguiente,
seleccione el código de fabricante apropiado.
1. Con el botón
1
(ENCENDIDO DEL
TELEVISOR) pulsado, pulse el código de
fabricante para su televisor con los botones
numéricos (véase tabla siguiente).
Fabricante
Número de
código
Pioneer 1 (por defecto)
Sony 2, 3
Panasonic 4, 5
Samsung 6, 7
LG 8, 9
2. Suelte el botón
1
(ENCENDIDO DEL
TELEVISOR) para completar el ajuste.
Dependiendo del televisor, algunos o todos los
botones pueden no funcionar en el televisor,
incluso después de introducir el código de
fabricante correcto. Cuando cambie las pilas
del mando a distancia, el número de código
que haya introducido podría volver al ajuste
por defecto. Introduzca de nuevo el número
de código adecuado.
7
Apéndice
HB985-DB.BDEUPPK_SPA.indd 67HB985-DB.BDEUPPK_SPA.indd 67 2010-05-14  2:48:392010-05-14  2:48:39
68
Apéndice
Apéndice
7
Lista del código del país
Seleccione un código de área de esta lista.
País Código País Código País Código País Código
Afganistán AF
Argentina AR
Australia AU
Austria AT
Bélgica BE
Bután BT
Bolivia SB
Brasil BR
Camboya KH
Canadá CA
Chile CL
China CN
Colombia CO
Congo CG
Costa Rica CR
Croacia HR
República Checa CZ
Dinamarca DK
Ecuador EC
Egipto EG
El Salvador SV
Etiopía ET
Fiji FJ
Finland FI
France FR
Germany DE
Great Britain GB
Greece GR
Greenland GL
Hong Kong HK
Hungary HU
India IN
Indonesia ID
Israel IL
Italy IT
Jamaica JM
Japan JP
Kenya KE
Kuwait KW
Libya LY
Luxembourg LU
Malaysia MY
Maldives MV
Mexico MX
Mónaco MC
Mongolia MN
Marruecos MA
Nepal NP
Holanda NL
Antillas Holandesas AN
Nueva Zelanda NZ
Nigeria NG
Noruega NO
Omán OM
Pakistán PK
Panamá PA
Paraguay PY
Filipinas PH
Polonia PL
Portugal PT
Rumanía RO
Federación de
Rusia RU
Arabia Saudita SA
Senegal SN
Singapur SG
República de
Eslovaquia SK
Eslovenia SI
Sudáfrica ZA
Corea del Sur KR
España ES
Sri Lanka LK
Suecia SE
Suiza CH
Taiwán TW
Tailandia TH
Turquía TR
Uganda UG
Ucrania UA
Estados Unidos US
Uruguay UY
Uzbekistán UZ
Vietnam VN
Zimbabwe ZW
HB985-DB.BDEUPPK_SPA.indd 68HB985-DB.BDEUPPK_SPA.indd 68 2010-05-14  2:48:392010-05-14  2:48:39
69
Apéndice
7
Apéndice
Lista de código de idioma
Utilice esta lista para introducir el idioma deseado para los siguientes ajustes iniciales: [Audio del
disco], [Subtítulo del disco] y [Menú del disco].
Idioma Código Idioma Código Idioma Código Idioma Código
Afar 6565
Afrikaans 6570
Albanés 8381
Amharic 6577
Árabe 6582
Armenio 7289
Assamais 6583
Aymara 6588
Azerbayano 6590
Bashkir 6665
Vasco 6985
Bengalí, Bangla 6678
Butaní 6890
Bihari 6672
Bretón 6682
Búlgaro 6671
Birmano 7789
Bielorruso 6669
Chino 9072
Croata 7282
Checo 6783
Danés 6865
Holandés 7876
Inglés 6978
Esperanto 6979
Estonio 6984
Feroés 7079
Fidji 7074
Finlandés 7073
Francés 7082
Frisón 7089
Gallego 7176
Georgiano 7565
Alemán 6869
Griego 6976
Groenlandés 7576
Guaraní 7178
Goujrati 7185
Haoussa 7265
Hebreo 7387
Hindi 7273
Húngaro 7285
Islandés 7383
Indonesio 7378
Interlingua 7365
Gaélico irlandés 7165
Italiano 7384
Japonés 7465
Kannada 7578
Kashmir 7583
Kazako 7575
Kirghiz 7589
Coreano 7579
Kurdo 7585
Laosiano 7679
Latín 7665
Letón 7686
Lingala 7678
Lituano 7684
Macedonio 7775
Malgache 7771
Malayo 7783
Malayalam 7776
Maorí 7773
Marath 7782
Moldavo 7779
Mongol 7778
Nauru 7865
Nepalés 7869
Noruego 7879
Oriya 7982
Punjabí 8065
Pastún 8083
Persa 7065
Polaco 8076
Portugués 8084
Quechua 8185
Reto-romano 8277
Rumano 8279
Ruso 8285
Samoano 8377
Sánscrito 8365
Gaélico escocés 7168
Serbio 8382
Serbo-croata 8372
Shona 8378
Sindhi 8368
Cingalés 8373
Eslovaco 8375
Esloveno 8376
Español 6983
Sudanés 8385
Swahili 8387
Sueco 8386
Tagalo 8476
Tajiko 8471
Tamil 8465
Telougou 8469
Tailandés 8472
Tonga 8479
Turco 8482
Turkmeno 8475
Twi 8487
Ucraniano 8575
Urdu 8582
Uzbeco 8590
Vietnamita 8673
Volapuk 8679
Galés 6789
Wolof 8779
Xhosa 8872
Yiddish 7473
Yoruba 8979
Zulú 9085
HB985-DB.BDEUPPK_SPA.indd 69HB985-DB.BDEUPPK_SPA.indd 69 2010-05-14  2:48:392010-05-14  2:48:39
70
Apéndice
Apéndice
7
Resolución de la salida de vídeo
Cuando se reproducen medios sin protección anticopia
Salida de vídeo
Resolución
HDMI OUT
COMPONENT VIDEO OUT
HDMI conectado HDMI desconectado
576i (480i) 576p (480i) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 720p
1080i 1080i 1080i
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 1080i
1080p / 50 Hz 1080p / 50 Hz 576i (480i) 1080i
Al reproducir un disco con protección anticopia
Salida de vídeo
Resolución
HDMI OUT
COMPONENT VIDEO OUT
HDMI conectado HDMI desconectado
576i (480i) 576p (480p) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 576i (480i) 576p (480p)
1080i 1080i 576i (480i) 576p (480p)
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 576p (480p)
1080p / 50 Hz 1080p / 50 Hz 576i (480i) 576p (480p)
Conexión HDMI OUT
Para una con guración de resolución de
576i (480i), la resolución real de salida de
HDMI OUT cambiará a 576p(480p).
Si selecciona manualmente una resolución
y, a continuación conecta un terminal HDMI
a la TV y ésta no la acepta, la con guración
de resolución cambiará a [Auto].
Si selecciona una resolución que el
televisor no admite, aparecerá un mensaje
de advertencia. Después de cambiar la
resolución, si no puede ver la pantalla,
espere 20 segundos y la resolución
regresará automáticamente a la resolución
anterior.
La velocidad de fotogramas de la salida
de video 1080p puede con gurarse
automáticamente a 24 Hz o 50 Hz
dependiendo de la capacidad y las
preferencias de la TV conectada y se basa
en la velocidad de fotogramas del vídeo
nativo del contenido del disco BD-ROM.
Conexión COMPONENT VIDEO
OUTconnection
Los sistemas BD o DVD podrían evitar la
escalada en la salida analógica.
Conexión VIDEO OUT
La resolución de la clavija VIDEO OUT siempre
es 576i (480i).
HB985-DB.BDEUPPK_SPA.indd 70HB985-DB.BDEUPPK_SPA.indd 70 2010-05-14  2:48:392010-05-14  2:48:39
71
Apéndice
7
Apéndice
“Disco Blu-ray” y son marcas comerciales.
El logotipo “BD-LIVE” es una marca registrada de la
asociación Blu-ray Disc.
“BONUSVIEW es una marca registrada de Blu-ray
Disc Association.
Java y todas las marcas comerciales y logotipos
basados en Java son marcas registradas o
comerciales de Sun Microsystems, Inc. en los
Estados Unidos y otros países.
Fabricado bajo la licencia de Dolby Laboratories.
Dolby y el símbolo de la doble-D son marcas
comerciales propiedad de Dolby Laboratories.
Fabricado bajo licencia bajo los siguientes
números de patente U.S.: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872 y
otras patentes U.S. y de otros países emitidas y
solicitadas. DTS y el símbolo son marcas registradas
y DTS-HD, DTS-HD Master Audio l Essential and los
logotipos DTS son marcas comerciales de DTS, Inc.
El producto incluye software. © DTS, Inc. Todos los
derechos reservados.
HDMI, el logotipo HDMI y High-De nition
Multimedia Interface son marcas registrada de
HDMI Licensing, LLC en Estados Unidos y otros
países.
El logotipo es una marca registrada de DVD
Format/Logo Licensing Corporation.
TM
DLNA y DLNA CERTIFIED son marcas comerciales
y / o marcas de servicio de Digital Living Network
Alliance
DivX es una marca comercial registrada de DivX,
Inc. y se utiliza bajo licencia.
“x.v.Color o “x.v.Colour” es una marca comercial de
Sony Corporation.
Marcas comerciales y licencias
HB985-DB.BDEUPPK_SPA.indd 71HB985-DB.BDEUPPK_SPA.indd 71 2010-05-14  2:48:392010-05-14  2:48:39
72
Apéndice
Apéndice
7
AVCHD” y el logotipo AVCHD” son marcas
registradas de Panasonic Corporation y Sony
Corporation.
Este producto tiene licencia bajo las previsiones
del archivo de patente AVC y VC-1 para uso
personal y no comercial de un consumidor para
(i) codi car vídeo según los estándares AVC y
VC-1 (“video AVC/VC-1”) o (ii) decodi car vídeo
AVC/VC-1 que ha sido codi cado por un usuario
involucrado en una actividad personal y no
comercial o se obtuvo de un proveedor de vídeo
autorizado para suministrar vídeo AVC/VC-1. No
se concede ni implica ninguna otra licencia para
ningún otro uso. Puede obtener información
adicional de MPEG LA, LLC. Visite
http://www.mpegla.com.
iPod es una marca comercial de Apple Inc.,
registrada en los Estados Unidos y en otros países.
iPhone es una marca comercial de Apple, Inc.
“Made for iPod” signi ca que el accesorio
electrónico ha sido diseñado para conectarse
de forma especí ca al iPod y como tal, ha sido
certi cado por el fabricante conforme a los
estándares de rendimiento de Apple.
Works with iPhone signi ca que el accesorio
electrónico ha sido diseñado para conectarse
de forma especí ca al iPhone y como tal, ha
sido certi cado por el fabricante conforme a los
estándares de rendimiento de Apple.
Apple no se responsabiliza del funcionamiento
de este dispositivo y su cumplimiento con los
estándares de regulación y seguridad.
Windows Media es una marca registrada o marca
comercial de Microsoft Corporation en Estados
Unidos y/u otros países.
Este producto incluye tecnología propiedad de
Microsoft Corporation y no puede ser utilizado o
distribuido sin una licencia de Microsoft Licensing,
Inc.
®
La tecnología inalámbrica Bluetooth® es un sistema
que permite contacto por radio entre aparatos
electrónicos con un alcance máximo de 10 metros.
La conexión de aparatos individuales bajo tecnología
inalámbrica Bluetooth no incurre en ningún cargo.
Se puede utilizar un teléfono móvil con tecnología
inalámbrica Bluetooth a través de Cascade, si la
conexión se ha realizado con tecnología inalámbrica
Bluetooth. El término, la marca y los logotipos
Bluetooth son propiedad de Bluetooth SIG, Inc. y
cualquier uso que Pioneer Corporation haga de
ellos estará bajo licencia. Otras marcas comerciales
y nombre comerciales son propiedad de sus
respectivos propietarios.
HB985-DB.BDEUPPK_SPA.indd 72HB985-DB.BDEUPPK_SPA.indd 72 2010-05-14  2:48:402010-05-14  2:48:40
73
Apéndice
7
Apéndice
Datos técnicos
General
• Requisitos eléctricos:
AC 220-240 V, 50/ 60 Hz
Consumo de energía:
150 W
En modo standby: Menos de 0,5 W
Dimensiones (An. x Al. x Prof.):
Aprox. 430 × 64 × 304 mm
Peso neto (aprox.):
3.6 kg
Temperatura en funcionamiento:
41 °F a 95 °F (5 °C a 35 °C)
• Humedad operativa:
5 % a 90 %
Suministro de corriente a Bus (USB):
DC 5 V
500 mA
Entradas/Salidas
• VIDEO OUT:
1,0 V (p-p), 75 , sincr. negativa, toma RCA x 1
• COMPONENT VIDEO OUT:
(Y) 1,0 V (p-p), 75 , sincr. negativa,
toma RCA x 1, (Pb)/(Pr) 0,7 V (p-p), 75 Ω,
toma RCA x 2
HDMI IN/OUT (vídeo/audio):
19 pines (HDMI estándar, tipo A, Versión 1.3)
Entrada de audio analógica:
2,0 Vrms (1 kHz, 0 dB), 600 ,
toma RCA (Izq., Dcha.) x 1
DIGITAL IN (OPTICAL 1/2):
3 V (p-p), 2 x toma óptica
Entrada de puerto :
0,5 Vrms (toma estéreo 3,5 mm)
Sintonizador
Rango de sintonización FM:
87.5 a 108.0 MHz o 87.50 a 108.00 MHz
Ampli cador
Salida de potencia, (PEAK), (4/3)
Total 1100 W
Parte anterior 180 W x 2
Centro 180 W
Parte trasera 180 W x 2
Subwoofer 200 W (Passive)
Salida de potencia, (RMS), THD 10% (4/3)
Total 930 W
Parte anterior 150 W x 2
Centro 150 W
Parte trasera 150 W x 2
Subwoofer 180 W (Passive)
Sistema
• Láser:
Láser semiconductor,
Longitud de onda: 405 nm / 650 nm
Sistema de señal:
Sistema de TV en color NTSC/PAL estándar
Respuesta de frecuencia:
20 Hz a 20 kHz (muestras, 48 kHz, 96 kHz, 192 kHz)
• Puerto LAN:
Toma Ethernet x 1, 10 BASE-T/100 BASE-TX
HB985-DB.BDEUPPK_SPA.indd 73HB985-DB.BDEUPPK_SPA.indd 73 2010-05-14  2:48:402010-05-14  2:48:40
74
Apéndice
Apéndice
7
Altavoces BCS-707
S-BD707
Altavoz delantero/Surround (Izquierdo/Delantero)
Modelo: 2 altavoces
Relación de impedancia: 4 
Dimensiones netas 260 x 1097 x 260 mm
(An. x Al. x Prof.):
Peso neto: 3.8 kg
• Altavoz central
Modelo: 1 altavoces
Relación de impedancia: 4 
Dimensiones netas 300 x 87x 65 mm
(An. x Al. x Prof.):
Peso neto: 0.6 kg
S-BD707SW
• Subwoofer
Modelo: 1 altavoces, 1 vías
Relación de impedancia: 3 
Dimensiones netas 130.5 x 420 x 375 mm
(An. x Al. x Prof.):
Peso neto: 4.4 kg
Altavoces BCS-303
S-BD303
Altavoz delantero/Surround (Izquierdo/Delantero)
Modelo: 1 altavoces
Relación de impedancia: 4 
Dimensiones netas 96 x 96 x 85 mm
(An. x Al. x Prof.):
Peso neto: 0.4 kg
• Altavoz central
Modelo: 1 altavoces
Relación de impedancia: 4 
Dimensiones netas 300 x 87 x 65 mm
(An. x Al. x Prof.):
Peso neto: 0.6 kg
• Subwoofer
Modelo: 1 altavoces, 1 vías
Relación de impedancia: 3 
Dimensiones netas 130.5 x 420 x 375 mm
(An. x Al. x Prof.):
Peso neto: 4.4 kg
HB985-DB.BDEUPPK_SPA.indd 74HB985-DB.BDEUPPK_SPA.indd 74 2010-05-14  2:48:402010-05-14  2:48:40
75
Apéndice
7
Apéndice
Aviso sobre el
software de código
abierto
Los siguientes ejecutables GPL y bibliotecas LGPL
utilizados en este producto están sujetos a los
Acuerdos de licencia de GPL2.0/LGPL2.1:
EJECUTABLES GPL: Linux kernel 2.6, bash, busybox,
cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils,
net-tools, procps, samba-3.0.25b, sysutils, tcpdump,
tftpd, tinylogin, unzip, utelnetd
BIBLIOTECAS LGPL: uClibc, DirectFB, blow sh,
cairo,  mpeg, iconv, libusb, mpg123
BIBLIOTECA 1.3, licencia pública gSOAL: gsoap
Se puede obtener el código fuente correspondiente
realizando el pago de distribución. Para obtener una
copia, póngase en contacto con el servicio local de
atención al cliente de Pioneer.
Puede obtener una copia de las licencias GPL, LGPL en
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html y
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
También puede obtener una copia de la licencia
pública gSOAP en http://www.cs.fsu.edu/~engelen/
license.html.
Este software se basa en parte del trabajo del
Independent JPEG Group – 1998, Thomas G. Lane.
Este producto incluye:
boost C++: copyright Beman Dawes 1999-2003
c-ares: copyright © 1998 por el MIT (Massachusetts
Institute of Technology)
curl: copyright © 1996 - 2008, Daniel Stenberg
expat: copyright © 2006 expat maintainers
freetype: copyright © 2003 The FreeType Project
(www.freetype.org)
jpeg: Este software se basa en parte del trabajo del
Independent JPEG Group – 1998, Thomas G. Lane
mng: copyright © 2000-2007 Gerard Juyn, Glenn
Randers-Pehrson
ntp : copyright © David L. Mills 1992-2006
• OpenSSL:
software criptográ co escrito por Eric Young
(eay@cryptsoft.com)
software escrito por Tim Hudson
(tjh@cryptsoft.com)
software desarrollado por OpenSSL Project
para su utilización en OpenSSL Toolkit.
(http://www.openssl.org)
png: copyright © 2004 Glenn Randers-Pehrson
portmap: copyright © 1990 The Regents of the
University of California
ptmalloc: copyright © 2001-2006 Wolfram Gloger
UnitTest++: copyright © 2006 Noel Llopis y
Charles Nicholson
UPnP SDK: copyright © 2000-2003 Intel
Corporation
• strace :
copyright © 1991, 1992 Paul Kranenburg
copyright © 1993 Branko Lankester
copyright © 1993 Ulrich Pegelow
copyright © 1995, 1996 Michael Elizabeth Chastain
copyright © 1993, 1994, 1995, 1996 Rick Sladkey
copyright © 1999,2000 Wichert Akkerman
xml2 : copyright © 1998-2003 Daniel Veillard
XML-RPC para C/C++:
copyright © 2001 por First Peer, Inc. Reservados
todos los derechos.
copyright © 2001 por Eric Kidd. Reservados todos
los derechos.
zlib: copyright © 1995-2002 Jean-loup Gailly y
Mark Adler.
Reservados todos los derechos
Por la presente, se concede permiso, de forma
gratuita, a toda persona que obtenga una copia
de este software o de archivos de documentación
relacionados con el mismo (en adelante,
el Software”) para tratar dicho Software sin
restricciones, incluyendo a modo enunciativo, el
derecho a utilizar, copiar, modi car, integrar con otro
Software, publicar, sublicenciar y/o vender copias
del Software, y además permitir a las personas a las
que se les entregue el Software hacer lo mismo,
conforme a las siguientes condiciones:
EL SOFTWARE SE FACILITA TAL CUAL, SIN
GARANTÍA DE NINGÚN TIPO, EXPLÍCITA O IMPLÍCITA,
INCLUYENDO A MODO ENUNCIATIVO, TODA
GARANTÍA DE COMERCIABILIDAD E IDONEIDAD
PARA UN FIN CONCRETO Y SIN VIOLACIÓN DE LOS
DERECHOS. BAJO NINGUNA CIRCUNSTANCIA, LOS
AUTORES O PORTADORES DE LOS DERECHOS DE
COPYRIGHT ASUMIRÁN RESPONSABILIDAD ALGUNA
ANTE RECLAMACIONES, DAÑOS O CUALQUIER OTRA
RESPONSABILIDAD, YA SEA MEDIANTE ACCIÓN
CONTRACTUAL, AGRAVIO U OTROS, RESULTANTE DE
O EN RELACIÓN CON EL SOFTWARE O EL USO QUE
SE HAGA DE ÉSTE U OTROS TEMAS RELACIONADOS
CON EL MISMO.
HB985-DB.BDEUPPK_SPA.indd 75HB985-DB.BDEUPPK_SPA.indd 75 2010-05-14  2:48:402010-05-14  2:48:40
2 Veiligheidsinformatie
Veiligheidsinformatie
1
OPGELET
SCHOKGEVAAR
NIET OPENEN
LET OP: om het risico van een elektrische schok
te voorkomen, het deksel (of de achterzijde)
niet verwijderen. Binnenin bevinden zich geen
onderdelen die door de gebruiker kunnen
worden onderhouden. Bel hiervoor een erkende
servicetechnicus.
Een bliksem met pijl in een
gelijkbenige driehoek is bedoeld
om de gebruiker attent te maken
op de aanwezigheid van een
gevaarlijke, niet-geïsoleerde
spanning in de behuizing van het
product die zo groot kan zijn dat zij
gevaar voor een elektrische schok
oplevert.
Het uitroepteken in een
gelijkbenige driehoek is bedoeld
om de gebruiker attent te
maken op belangrijke gebruiks-
en onderhoudsinstructies in
de bij het apparaat geleverde
gebruiksaanwijzing.
Veiligheidsmaatregelen en
waarschuwingen
WAARSCHUWING: STEL DIT PRODUCT NIET BLOOT
AAN REGEN OF VOCHT OM HET RISICO VAN BRAND
OF EEN ELEKTRISCHE SCHOK TE VOORKOMEN.
WAARSCHUWING: Plaats het toestel niet in een
kleine ruimte, zoals een boekenkast of een dergelijke
afgesloten ruimte.
WAARSCHUWING: Blokkeer de ventilatieopeningen
niet. Installeer volgens de instructies van de fabrikant.
Sleuven en openingen in de kast zijn geplaatst ter
ventilatie en te zorgen voor betrouwbaar gebruik van
het product, en om oververhitting te voorkomen.
De openingen mogen nooit geblokkeerd worden
door het product op een bed, bank, tapijt of
soortgelijke ondergrond te plaatsen. Het product
mag niet geplaatst worden in een inbouwmeubel,
zoals een boekenkast of rek tenzij er gezorgd wordt
in voldoende ventilatie en de instructies van de
fabrikant opgevolgd worden.
WAARSCHUWING: Dit is een klasse 1 laserproduct
en valt onder de norm Veiligheid van laserproducten,
IEC 60825-1:2007. U dient, voor een correct
gebruik van dit product, de gebruikershandleiding
aandachtig door te lezen en deze te bewaren voor
toekomstig gebruik. Indien het apparaat onderhoud
nodig heeft, neem dan contact op met een erkend
servicecentrum.
Het gebruik van een of meer bedieningsknoppen,
instellingen of procedures op een andere wijze dan
in deze handleiding is aangegeven kan blootstelling
aan gevaarlijke straling tot gevolg hebben.
Voorkom directe blootstelling aan de laserstraal
en open het apparaat niet. Zichtbare laser straling
indien geopend. KIJK NIET IN DE STRAAL.
1
Veiligheidsinformatie
HB985-DB.BDEUPPK_DUT.indd 2HB985-DB.BDEUPPK_DUT.indd 2 2010-05-14  2:57:552010-05-14  2:57:55
Veiligheidsinformatie
3Veiligheidsinformatie
1
WAARSCHUWING betre ende de
netvoedingskabel
Wij adviseren de meeste apparaten aan te sluiten
op een eigen circuit, namelijk een enkelvoudig
stopcontact dat alleen dat apparaat van
stroom voorziet en geen verdere aansluitingen
betreft. Controleer de speci caties in deze
gebruikershandleiding om zeker te zijn. Sluit niet
teveel apparaten aan op hetzelfde stopcontact.
Overbelaste stopcontacten, loszittende of
beschadigde stopcontacten, verlengsnoeren,
beschadigde netvoedingskabels of beschadigde of
gebarsten kabelisolatie zijn gevaarlijk. Elk van deze
omstandigheden kunnen leiden tot kortsluiting
of brand. Periodieke controle van de kabel van uw
apparaat is noodzakelijk, en indien het apparaat
tekenen van beschadiging of slijtage toont, trek dan
de stekker uit het stopcontact, gebruik het apparaat
niet, en laat de kabel door een erkend servicecentrum
vervangen door een goedgekeurd gelijkwaardig
exemplaar. Bescherm de netvoedingskabel tegen
fysiek of mechanisch misbruik, zoals buigen,
vastklemmen, klemmen tussen een gesloten
deur, of erover lopen. Let speciaal op stekkers,
wandcontactdozen en het punt waar de kabel het
apparaat verlaat. Verwijder de netvoedingskabel
door aan de stekker te trekken, niet aan de kabel. Let
erop dat de stekker makkelijk toegankelijk is nadat u
het product hebt geïnstalleerd.
Hierdoor verklaart PIONEER dat dit/
deze product(en) voldoet/voldoen
aan de belangrijkste eisen en andere
relevante voorzieningen van de
Europese Richtlijnen 2004/108/EC,
2006/95/EC en 2009/125/EC.
WAARSCHUWING: Voorkom brandgevaar en plaats
geen bronnen met open vuur (zoals brandende
kaarsen) op de apparatuur.
Dit apparaat is voorzien van een draagbare batterij of
accu.
U kunt de batterij of de accu als volgt veilig uit
het apparaat verwijderen: Verwijder de oude
batterij of het batterijpack. Ga in omgekeerde
volgorde als bij het plaatsen te werk. Voorkom
milieuvervuiling en gezondheidsgevaren voor mens
en dier en werp de oude batterij, het batterijpack
of de accu in de daarvoor bestemde bak bij een
o cieel aangewezen inzameladres. Doe oude
batterijen en accu’s nooit samen met het gewone
huisvuil weg. Wij adviseren u gratis batterijen en
accu’s te gebruiken die u tegen vergoeding weer
kunt inleveren(Indien deze service in uw land wordt
geboden.). Stel de batterij (accu) niet bloot aan de
hoge temperatuur van rechtstreekse zonnestraling,
een open haard e.d.
WAARSCHUWING: Dit apparaat mag niet worden
blootgesteld aan druip- of spatwater en plaats geen
objecten gevuld met vloeistof, zoals vazen, op het
apparaat.
HB985-DB.BDEUPPK_DUT.indd 3HB985-DB.BDEUPPK_DUT.indd 3 2010-05-14  2:57:582010-05-14  2:57:58
4 Veiligheidsinformatie
Veiligheidsinformatie
1
Informatie voor gebruikers betre ende het
inzamelen en opruimen van oude apparaten en
gebruikte batterijen
Deze symbolen op de producten, verpakking en/
of meegeleverde documenten betekenen dat
gebruikte elektrische en elektronische producten en
batterijen niet tegelijk met algemeen huishoudelijk
afval mogen worden opgeruimd.
Breng oude producten en gebruikte batterijen
zoals wettelijk voorgeschreven naar de daarvoor
aangewezen inzamelingsadressen die voor een juiste
behandeling, reparatie of hergebruik kunnen zorgen.
Door deze producten en batterijen op de juiste
wijze op te ruimen helpt u waardevolle grondsto en
te behouden en voorkomt u mogelijke negatieve
e ecten voor de gezondheid van mens en dier die
het gevolg zijn van het achteloos wegdoen van afval.
Voor meer informatie over het inzamelen en
hergebruiken van oude producten en batterijen
kunt u contact opnemen met het gemeentehuis van
uw woonplaats, een o cieel inzameladres of het
verkooppunt waar u de goederen hebt gekocht.
Deze symbolen gelden alleen in de Europese
Unie.
Voor landen buiten de Europese Unie:
Als u deze zaken wilt afdanken, neem dan contact
op met het gemeentehuis van uw woonplaats of de
leverancier ervan en vraag naar de juiste manier van
wegdoen.
Wat u moet weten over copyright
Er zijn bepaalde beperkingen voor afspelen,
analoge signaaluitvoer, etc van door AACS
beschermde inhoud, omdat AACS (Advanced
Access Content System) goedgekeurd is als
inhoudbeschermingsysteem voor BD-formaat,
gelijk aan het gebruik van CSS (Content
Scramble System). Het gebruik van dit product
en beperkingen op dit product kunnen variëren
afhankelijk van uw tijd van aankoop aangezien die
beperkingen zijn toegepast en/of gewijzigd door
AACS na de productie van dit product.
Verder worden BD-ROM Mark en BD+ nog
gebruikt als inhoudbeveiligingssyteem voor het
BD-formaat, dat bepaalde beperkingen oplegt
inclusief afspeelbeperkingen aan met BD-ROM
Mark en/of BD+ beveiligde inhoud. Voor extra
informatie over AACS, BD-ROM teken, BD+, of dit
product, neemt u contact op met een erkend
Klantenservicecentrum.
Veel BD-ROM/DVD disks zijn gecodeerd met
kopieerbeveiliging. Hierdoor dient u uw speler
rechtstreeks op uw tv aan te sluiten, niet op
een videorecorder. Het aansluiten op een
videorecorder heeft een gestoord beeld van
tegen kopiëren beveiligde disks tot gevolg.
Dit product maakt gebruik van technologie
voor bescherming van auteursrechten die
beschermd wordt door U.S. patenten en andere
intellectuele eigendomsrechten. Gebruik van deze
technologie ter bescherming van auteursrechten
moet geautoriseerd worden door Rovi, en is
bedoeld voor thuisgebruik en beperkt aantal
kijkbeurten, tenzij anderszins aangegeven door
Rovi. Omgekeerde engineering of demontage is
verboden.
Volgens de Amerikaanse wetgeving op het
auteursrecht en de daarmee vergelijkbare
wetgeving van andere landen, is niet bevoegde
opname, gebruik, tonen, distributie of revisie
van televisieprogrammas, videobanden, BD-
ROM disks, DVD’s, CD’s en andere materialen
onderworpen aan civielrechtelijke en/of
strafrechtelijke wetgeving.
Pb
(
Voorbeelden van
symbolen voor
batterijen
)
HB985-DB.BDEUPPK_DUT.indd 4HB985-DB.BDEUPPK_DUT.indd 4 2010-05-14  2:57:582010-05-14  2:57:58
Veiligheidsinformatie
5Veiligheidsinformatie
1
Belangrijke informatie over het tv-
kleurensysteem
Het door deze speler gebruikte tv-kleurensysteem
richt zich naar de afgespeelde disks.
Wanneer de speler bijvoorbeeld een volgens het
NTSC-kleurensysteem opgenomen disk afspeelt,
wordt het beeld als NTSC-signaal uitgevoerd.
Alleen kleurentelevisies die voor meerdere
kleurensystemen geschikt zijn, kunnen alle door de
speler uitgevoerde signalen verwerken.
Als uw tv uitsluitend geschikt is voor PAL
kleurensignalen toont het beeldscherm
vervormde beelden wanneer u disks of video-
inhoud gebruikt die in NTSC zijn opgenomen.
Een kleuren-tv die voor meerdere systemen
geschikt is, past het kleurensysteem automatisch
aan bij het ingevoerde signaal. Wanneer
het kleurensysteem niet automatisch wordt
overgeschakeld, schakelt u de tv uit en weer aan
waardoor een normaal beeld op het beeldscherm
moet verschijnen.
Ook wanneer volgens het NTSC-kleurensysteem
opgenomen disks door uw tv correct worden
weergegeven is het mogelijk dat dit signaaltype
niet correct door uw recorder wordt opgenomen.
HB985-DB.BDEUPPK_DUT.indd 5HB985-DB.BDEUPPK_DUT.indd 5 2010-05-14  2:57:582010-05-14  2:57:58
6
Inhoud
1
Veiligheidsinformatie
2 Veiligheidsmaatregelen en
waarschuwingen
2
Voorbereiding
8 Inleiding
8 Weergave van het symbool
8 Symbolen die in deze
handleiding worden gebruikt
9 Meegeleverde toebehoren
10 Afspeelbare disks
11 Bestandscompatibiliteit
12 Regiocode
12 AVCHD (Advanced Video
Codec High De nition)
12 Bepaalde systeemvereisten
12 Opmerkingen betre ende
compatibiliteit
13 Afstandsbediening
14 Voorpaneel
15 Achterpaneel
3
Installeren
16 Luidsprekers monteren
16 Luidsprekers installeren
BCS-707
18 Luidsprekers installeren
BCS-303
19 De middenluidspreker aan de wand
bevestigen
19 Extra informatie over het ophangen
van luidsprekers
20 Het systeem opstellen
21 Aansluitingen op uw tv
21 HDMI-aansluiting
22 Component Video-
aansluiting
23 Videoverbinding
23 Resolutie instellen
24 Antenneaansluiting
24 Op een extern apparaat aansluiten
24 AUX-aansluiting
25 PORTABLE IN-aansluiting
25 OPTICAL IN 1/2-aansluiting
26 Bluetooth® aansluiting
28 Aansluiten op uw thuisnetwerk
29 Een netwerk installeren
31 Usb-apparaat aansluiten
32 Instellingen
32 De setup-instellimgen
aanpassen
33 [SCHERM]-menu
34 [TAAL]-menu
35 [AUDIO]-menu
36 [SLOT]-menu
37 [NETWERK]-menu
37 [ANDERS]-menu
39 Geluidse ecten
HB985-DB.BDEUPPK_DUT.indd 6HB985-DB.BDEUPPK_DUT.indd 6 2010-05-14  2:57:592010-05-14  2:57:59
7
1
2
3
4
5
6
7
8
4
Bediening
40 Afspelen in het algemeen
42 Geavanceerd afspelen
45 Beeldscherminformatie (OSD)
48 De ongekende mogelijkheden van
BD-Live
49 Film- en VR-disks afspelen
51 Foto’s bekijken
53 Naar muziek luisteren
56 iPod afspelen
58 Radio
59 Inhoud via uw thuisnetwerk afspelen
5
Onderhoud
63 Wat u over disks moet weten
63 Behandeling van het apparaat
6
Problemen oplossen
64 Algemeen
65 Beeld
65 Geluid
66 Netwerk
7
Bijlage
67 Uw tv bedienen met de
meegeleverde afstandsbediening
68 Regiocodelijst
69 Taalcodelijst
70 Resolutie video-uitvoersignaal
71 Handelsmerken en licenties
73 Technische gegevens
75 Kennisgeving over open-source
software
HB985-DB.BDEUPPK_DUT.indd 7HB985-DB.BDEUPPK_DUT.indd 7 2010-05-14  2:57:592010-05-14  2:57:59
8 Voorbereiding
Voorbereiding
2
2
Voorbereiding
Inleiding
Weergave van het symbool
kan op uw tv-scherm verschijnen tijdens
gebruik en geeft aan dat de functie die wordt
uitgelegd in deze gebruikershandleiding niet
beschikbaar is bij die speci eke media.
Symbolen die in deze
handleiding worden gebruikt
LET OP
Geeft aan dat er bijzondere opmerkingen en
bedieningskenmerken zijn.
VOORZICHTIG
Vestigt uw aandacht op voorzorgsmaatregelen
die mogelijke schade door verkeerd gebruik
kunnen voorkomen.
Een hoofdstuk waarvan de titel een van
de volgende symbolen bevat, is alleen van
toepassing op de disk waarnaar het symbool
verwijst.
BD
BD-ROM disk
DVD
DVD-Video, DVD±R/RW
in Video modus of VR
modus en ge naliseerd
AVCHD
DVD±R/RW in AVCHD
formaat
ACD
Audio cd
MOVIE
Filmbestanden
MUSIC
Muziekbestanden
PHOTO
Fotobestanden
HB985-DB.BDEUPPK_DUT.indd 8HB985-DB.BDEUPPK_DUT.indd 8 2010-05-14  2:57:592010-05-14  2:57:59
9Voorbereiding
2
Voorbereiding
Meegeleverde toebehoren
Videokabel (1)
Afstandsbediening (1)
Batterijen (1) Fm-antenne (1)
iPod houder (1)
Toebehoren voor luidsprekerboxen
(S-BD707T)
Luidsprekerkabel (5)
Schroeven (12)
Luidsprekervoet
-stukken (4)
kleine
antislipkussentjes (1)
Middelgrote
antislipkussentjes (1)
Toebehoren voor luidsprekerboxen
(S-BD707SW)
Luidsprekerkabel (1) Grote
antislipkussentjes (1)
Toebehoren voor luidsprekerboxen
(S-BD303)
Luidsprekerkabel (6)
kleine
antislipkussentjes (1)
Grote
antislipkussentjes (1)
HB985-DB.BDEUPPK_DUT.indd 9HB985-DB.BDEUPPK_DUT.indd 9 2010-05-14  2:57:592010-05-14  2:57:59
10 Voorbereiding
Voorbereiding
2
Afspeelbare disks
Blu-ray Disc
- Disks met  lms die u kunt
kopen of huren.
- BD-R/RE disks die  lm-, muziek-
of fotobestanden bevatten.
DVD-VIDEO
8 / 12 cm
Disks met  lms die u kunt kopen
of huren.
DVD±R
8 / 12 cm
- Alleen video-opnamen, mits
ge naliseerd
- Ook tweelaags disks worden
ondersteund
- Ge naliseerd AVCHD-formaat
- DVD±R disks die  lm-, muziek-
of fotobestanden bevatten.
DVD-RW
8 / 12 cm
- Alleen VR modus, Videomodus
en ge naliseerd
- Ge naliseerd AVCHD-formaat
- DVD-RW disks die  lm-
, muziek- of fotobestanden
bevatten.
DVD+RW
8 / 12 cm
- Alleen video-opnamen, mits
ge naliseerd
- AVCHD-formaat
- Ge naliseerd AVCHD-formaat
- DVD+RW disks die  lm-,
muziek- of fotobestanden
bevatten.
Audio CD
8 / 12 cm
CD-R/RW
8 / 12 cm
- CD-R/RW disks die audiotitels
evenals  lm-, muziek- en
fotobestanden kunnen
bevatten.
LET OP
Afhankelijk van de conditie van de
opnameapparatuur of van de CD-R/RW
(of DVD±R/RW)-disk zelf, kunt u sommige CD-R/
RW (of DVD±R/RW)-disks niet met deze speler
weergeven.
Afhankelijk van de opnamesoftware en de
nalisering is het mogelijk dat u sommige
opgenomen disks (CD-R/RW, DVD±R/RW, BD-R/
RE) niet met deze speler kunt weergeven.
Het is mogelijk dat u CD-R/RW- en BD-R/RE,
DVD±R/RW-disks die met behulp van een pc
of dvd- of cd-recorder zijn opgenomen niet
met deze speler kunt weergeven als de disk is
beschadigd of als er vuil of condens op de lens
van de speler aanwezig is.
Als u een disk met behulp van een pc opneemt,
is het mogelijk dat u de disk - zelfs als u deze in
een compatibel formaat opneemt - niet kunt
weergeven als gevolg van de instellingen van
de applicatiesoftware die u hebt gebruikt om de
disk te beschrijven. (Neem voor meer informatie
contact op met de leverancier van de software.)
Deze speler vereist dat de gebruikte disks en
opnamen aan bepaalde technische normen
voldoen om een optimaal opname- en
weergaveresultaat te bereiken.
Vooraf opgenomen dvd-disks worden
automatisch op deze normen ingesteld. Er is een
groot aantal verschillende typen opneembare
diskformaten (waaronder begrepen cd-r-
disks die mp3- of wma-bestanden bevatten)
en deze vereisen bepaalde vooraf aanwezige
voorwaarden om het compatibel afspelen
mogelijk te maken.
Wij nemen aan dat u weet dat u toestemming
moet hebben voor het downloaden van mp3-
en wma-bestanden van het internet. Ons bedrijf
heeft niet het recht deze toestemming te
verlenen. U moet toestemming hebben van de
eigenaar van het auteursrecht (“copyright”).
HB985-DB.BDEUPPK_DUT.indd 10HB985-DB.BDEUPPK_DUT.indd 10 2010-05-14  2:58:002010-05-14  2:58:00
11Voorbereiding
2
Voorbereiding
Bestandscompatibiliteit
Volledig
Beschikbare bestandsextensies:
.jpg”, “.jpeg”, “.png”, “.avi”, “.divx, “.mpg”, “.mpeg”,
.mkv, “.mp4”, “.mp3”, “.wma, “.wav
De beschikbare bestandsextensies zijn
verschillend, afhankelijk van de DNLA-
servers.
Sommige .wav”-bestanden worden op
deze speler niet ondersteund.
De bestandsnaam is tot 180 tekens beperkt.
Afhankelijk van de grootte en het aantal
bestanden kan het enige minuten duren
om de inhoud op het medium in te lezen.
Maximum bestanden/mappen: Minder dan
2 000 (totaal aantal bestanden en mappen)
CD-R/RW, DVD±R/RW, BD-R/RE formaat:
ISO 9 660+JOLIET, UDF en UDF Bridge formaat
MOVIE (Film)
Beschikbare resolutiegrootte:
1 920 x 1 080 (B x H) pixels
Afspeelbare ondertitel: SubRip (.srt / .txt),
SAMI (.smi), SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub (.sub), SubViewer
1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer
(.txt), DVD Subtitle System (.txt)
VobSub (.sub) is niet beschikbaar in de
[HomeLink]-func
tie.
Afspeelbare DivX ondertiteling: “DIVX3.xx”,
“DIVX4.xx, “DIVX5.xx, “XVID”, “DIVX6.xx (alleen
standaard afspelen), H.264/MPEG-4 AVC,
MPEG1 SS, MPEG2 PS, MPEG2 TS
Afspeelbaar Audioformaat: “Dolby Digital”,
“DTS, “MP3”, “WMA, “AAC, “AC3”
Niet alle wma- en aac-audioformaten zijn
voor dit apparaat geschikt.
Bemonsteringsfrequentie:
Vanaf 32 kHz t/m 48 kHz (WMA),
Vanaf 16 kHz t/m 48 kHz (MP3)
Bitsnelheid:
Vanaf 20 kbps t/m 320 kbps (WMA),
Vanaf 32 kbps t/m 320 kbps (MP3)
LET OP
Het kan voorkomen dat HD  lmbestanden op
een CD of USB 1,0/1,1 niet goed afgespeeld
worden. BD, DVD of USB 2,0 worden aanbevolen
om HD  lmbestanden af te spelen.
Deze speler ondersteunt H.264/MPEG-4 AVC
pro le Main, High op niveau 4,1. Bij titels met
een hoger niveau verschijnt een waarschuwing
op het beeldscherm.
Deze speler ondersteunt geen bestanden die
met GMC*
1
of Qpel*
2
zijn opgenomen. Dat zijn
videocoderingstechnieken volgens de MPEG4-
norm zoals DivX en XviD.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
MUSIC (Muziek)
Bemonsteringsfrequentie:
Vanaf 8 t/m 48 KHz (wma),
Vanaf 11 t/m 48 KHz (mp3),
Bitsnelheid:
Vanaf 8 t/m 320 Kbps (wma, mp3),
LET OP
Dit apparaat ondersteunt geen ID3 tag-
embedded mp3-bestanden.
De totale afspeeltijd aangeduid op het scherm
kan niet voor VBR-bestanden gecorrigeerd
worden.
PHOTO (Foto)
Geadviseerde grootte:
Minder dan 4.000 x 3.000 x 24 bits/pixels
Minder dan 3.000 x 3.000 x 32 bits/pixels
Minder dan 4 MByte/ le
Progressieve en lossless-compression
f
otobeeldbestanden worden niet
ondersteund.
HB985-DB.BDEUPPK_DUT.indd 11HB985-DB.BDEUPPK_DUT.indd 11 2010-05-14  2:58:002010-05-14  2:58:00
12 Voorbereiding
Voorbereiding
2
Regiocode
Achterop deze speler is een regiocode
aangegeven. Deze speler is uitsluitend geschikt
voor het afspelen van BD-ROM- en DVD-disks
waarop dezelfde regiocode of de tekst Alles” is
aangegeven.
AVCHD (Advanced Video Codec
High De nition)
Deze speler kan AVCHD geformatteerde
disks afspelen. Deze disk worden normaliter
opgenomen en gebruikt in camcorders.
Het AVCHD formaat is een hoogde nitie
digitaal videocamera formaat.
Het MPEG-4 AVC/H.264 formaat is
in staat tot het comprimeren van
beelden in een hogere e ciëntie
dan die van het conventionele beeld
comprimeringsformaat.
Sommige AVCHD disks gebruiken het
“x.v.Colour formaat.
Deze speler kan AVCHD disks afspelen met
het “x.v.Colour formaat.
Sommige disks in AVCHD formaat worden
niet afgespeeld, afhankelijk van de opname
omstandigheden.
AVCHD disks moeten ge naliseerd worden.
“x.v.Colour” biedt een groter kleurbereik dan
normale DVD camcorderdisks.
Bepaalde systeemvereisten
Voor het afspelen van hogede nitie-video:
• Hogede nitie-beeldscherm met
COMPONTENT of HDMI ingangen.
BD-Rom disk met hogede nitie inhoud.
Voor de weergave van bepaald materiaal
is een monitor nodig met een voor
HDMI of HDCP geschikte DVI-ingang (als
aangegeven door de makers van de disk).
Voor de up-conversie van DVD’s die
materiaal van standaard-de nitie bevatten
is voor de weergave van tegen kopiëren
beveiligd materiaal een monitor nodig met
een DVI-ingang die voor HDMI of HDMI
geschikt is.
Opmerkingen betre ende
compatibiliteit
Omdat BD-ROM een nieuw formaat
is, kunnen bij bepaalde disks, digitale
aansluitingen en andere verbindingen
compatibiliteitsproblemen optreden.
Neem contact op met het LG
Klantenservicecentrum indien u
compatibiliteitsproblemen aantreft.
De weergave van hogede nitiemateriaal en
het omzetten van standaard DVD inhoud
kan een monitor vereisen met ingangen die
geschikt zijn voor HDMI of een voor HDMI
geschikte DVI.
Sommige BD-ROM en DVD disks
kunnen het gebruik van bepaalde
bedieningscommandos of functies
beperken.
U kunt een usb-apparaat gebruiken dat
wordt gebruikt om bepaalde aan disks
gerelateerde informatie op te slaan
waaronder gedownload on-line materiaal.
De disk die u gebruikt bepaalt hoe lang
deze informatie wordt vastgehouden.
HB985-DB.BDEUPPK_DUT.indd 12HB985-DB.BDEUPPK_DUT.indd 12 2010-05-14  2:58:002010-05-14  2:58:00
13Voorbereiding
2
Voorbereiding
Afstandsbediening
1
2
3
• • • • • • • • •
a
• • • • • • • • •
1
(STANDBY/ON): Schakel het
toestel AAN/UIT.
Z
OPEN/CLOSE: Opent of sluit de
disklade.
INPUT/TUNER: Hiermee kunt u
de invoermodus wijzigen.
BT AUDIO: Changes input mode to
BT AUDIO directly.
OPTICAL: Hiermee wijzigt u de
invoermodus rechtstreeks in
optisch.
DISPLAY: Opent of sluit de On-
Screen Display.
HOME MENU: Geeft het
[Beginmenu] weer of stopt
hiermee.
MENU: Opent een menu op een
disk.
Richtingknoppen: Hiermee
selecteert u een optie in het menu.
ENTER: Bevestigt de
menukeuze.
TUNE (+/-): Stemt af op de
gewenste radiostations.
PRESET: Selecteert
radioprogramma’s.
• • • • • • • • •
b
• • • • • • • • •
O
RETURN: Sluit het menu af en
hervat het afspelen.
POPUP/ TOP MENU: Toont
het DVD titelmenu of BD-ROM
popupmenu indien beschikbaar.
x
STOP: Stopt de weergave.
B
PLAY: De weergave starten.
X
PAUSE/STEP: Pauzeert het
afspelen.
.
/
>
SKIP: Ga naar volgende
of vorige bestand/track/hoofdstuk.
m
/
M
SCAN: Zoekt
achterwaarts of voorwaarts.
SPK LEVEL: Hiermee stelt u het
geluidsniveau van de gewenste
luidspreker in.
z
USB REC: Hiermee neemt u een
audio-cd op.
MUTE: Hiermee kunt u het systeem
stilschakelen.
SOUND: Hiermee selecteert u de
modus voor geluidse ecten.
VOL +/- : Hiermee past u het
luidsprekervolume aan.
• • • • • • • • •
c
• • • • • • • • •
0-9 numerieke toetsen: Selecteert
genummerde opties in een menu.
MARKER: Hiermee kunt u tijdens
het afspelen een herkenningspunt
vastleggen.
SEARCH: Hiermee kunt u het
zoekmenu oproepen of sluiten.
REPEAT: Hiermee herhaalt u
een bepaald hoofdstuk.
CLEAR: Verwijdert een markering
in het zoeken menu of een getal
tijdens het instellen van het
wachtwoord.
DIMMER: Dimt de verlichting van
de speler.
ZOOM: Accesses ths zoom menu.
Gekleurde (A, B, C, D) knoppen:
Hiermee navigeert u door menu’s.
- A Knop voor (RDS): Radio Data
System.
- B Knop voor (PTY): Toont het het
programmatype van het RDS.
- C Knop voor (PTY SEARCH):
Zoekt het programmatype op.
- D Knop voor: Hiermee selecteert
u mono of stereo in de fm-modus.
Tv-bedieningsknoppen: Zie
pagina 67.
SLEEP: Hiermee stelt u een
bepaalde tijdsduur in waarna het
systeem zichzelf automatisch
uitschakelt.
Batterijen installeren
Maak het deksel van
het batterijenvak aan
de achterkant van de
afstandsbediening open
en plaats daarin een R03
(formaat AAA) batterij en wel
zó dat de tekens en op
de batterij aansluiten op deze
tekens in het batterijenvak.
HB985-DB.BDEUPPK_DUT.indd 13HB985-DB.BDEUPPK_DUT.indd 13 2010-05-14  2:58:002010-05-14  2:58:00
14 Voorbereiding
Voorbereiding
2
Voorpaneel
a
Disklade
b
Bedieningsknoppen
1
STANDBY/ON Knop voor
Z
(OPEN/CLOSE)
FUNCTIE
Hiermee wijzigt u de invoerbron of –
functie.
B
/
X
(PLAY / PAUSE)
x
(STOP)
.
/
>
(SKIP)
- TUNE + (Op radiostations afstemmen)
c
Sensor van de afstandsbediening
d
Informatievenster
e
PORTABLE IN
f
Usb-poort
g
Volumeregeling
1
2
3 4 5 6 7
HB985-DB.BDEUPPK_DUT.indd 14HB985-DB.BDEUPPK_DUT.indd 14 2010-05-14  2:58:012010-05-14  2:58:01
15Voorbereiding
2
Voorbereiding
a
Netvoedingskabel
Bevestig deze kabel in een stopcontact.
b
Luidsprekeraansluitingen
c
Koelventilator
d
Antenneaansluiting
e
VIDEO OUT
f
AUX (L/R) INPUT
g
COMPONENT VIDEO (Y P
B
P
R
)
uitgang (PROGRESSIVE SCAN)
h
Optische aansluiting 1(TV) / 2
i
iPod (24 pin)
Aansluiten op de meegeleverde iPod
houder.
j
HDMI OUT (type A, versie 1.3)
Bestemd voor aansluiting op een tv met
HDMI-ingangen.
k
LAN-poort
Achterpaneel
1 2 3 4 5
6 7 8 9 10 11
HB985-DB.BDEUPPK_DUT.indd 15HB985-DB.BDEUPPK_DUT.indd 15 2010-05-14  2:58:012010-05-14  2:58:01
16 Installeren
Installeren
3
Luidsprekers
monteren
Luidsprekers installeren
BCS-707
De luidsprekers voorbereiden
1. Bevestig antislipkussentjes op de onderkant
van de luidsprekerconsoles, de subwoofer
en de middenluidspreker.
Voor luidsprekerconsoles:
Zet vier middelgrote antislipkussentjes
met het meegeleverde hechtmiddel
op de onderkant (de bodem) van de
luidsprekerconsoles vast.
middle non-skid pads
middelgrote antislipkussentjes
Voor de subwoofer:
Zet vier grote antislipkussentjes met
het meegeleverde hechtmiddel op de
onderkant van de subwoofer vast.
large non-skid pads
grote antislipkussentjes
Voor de middenluidspreker:
Zet vier kleine antislipkussentjes op de
onderkant van de middenluidspreker vast.
small non-skid pads
kleine
antislipkussentjes
2. Bevestig de luidsprekerconsoles met
de meegeleverde schroeven op de
draagstangen.
Plaats elke draagstang en console recht op
elkaar en ze zet vervolgens op de hieronder
aangegeven punten met de meegeleverde
schroe es vast. Let erop dat de luidsprekers
in de richting van de gebruikelijke
luisterpositie moeten wijzen.
Rear
Front
Achterzijde
Voorzijde
3
Installeren
HB985-DB.BDEUPPK_DUT.indd 16HB985-DB.BDEUPPK_DUT.indd 16 2010-05-14  2:58:012010-05-14  2:58:01
17Installeren
3
Installeren
3. Sluit de luidsprekerkabels op de speler aan.
Sluit de witte kabel met de grijze lijn op de
(+) zijde aan en de andere kabel op de (-)
zijde. Druk vervolgens op het kunststof lipje
van elk aansluitpunt om dit te openen en
de kabel met de speler te verbinden. Steek
het kabeluiteinde erin en laat het lipje los.
Kleur (+)
Zwart (-)
VOORZICHTIG
Sluit op de speler geen andere luidsprekers
aan dan de luidsprekers die bij dit systeem zijn
geleverd.
Sluit de meegeleverde luidsprekers niet op een
andere versterker aan dan de versterker die
bij dit systeem is meegeleverd. Wanneer u de
luidsprekers op een andere versterker aansluit
riskeert u beschadiging van de luidsprekers en
de versterker evenals brand.
De frontluidsprekers en de surround-
luidspreker vastzetten
Zet de frontluidsprekers en de surround-
luidspreker met de meegeleverde kunststof
houder vast. Schroef twee steunhaken in de
wand achter elke luidspreker. Voer een dik
koord rond de haken en door de kunststof
houder om de luidsprekers te stabiliseren
(controleer of deze constructie het gewicht van
de luidsprekers kan dragen). Controleer nadat
u alles hebt gemonteerd of elke luidspreker
goed vast zit.
thick cord
Plastic catch
Voldoende dik koord
Kunststof houder
VOORZICHTIG
De kunststof houder is geen montage tting en
de luidsprekers mogen niet met deze houder
rechtstreeks aan de wand worden opgehangen.
Gebruik bij het stabiliseren van de luidsprekers
altijd een koord.
Pioneer is niet aansprakelijk voor verliezen of
schade als gevolg van onvakkundige montage,
installatie, onvoldoende sterkte van het
montagemateriaal, verkeerd gebruik of van
buiten komend onheil zoals natuurgeweld.
Bij het plaatsen van dit apparaat moet u ervoor
zorgen dat het stevig vast zit. Bevestig de
apparatuur niet op wandgedeelten waar het
gevaar bestaat dat deze bij een natuurramp
zoals een aardbeving van de wand kan vallen en
personen verwonden.
HB985-DB.BDEUPPK_DUT.indd 17HB985-DB.BDEUPPK_DUT.indd 17 2010-05-14  2:58:022010-05-14  2:58:02
18 Installeren
Installeren
3
Luidsprekers installeren
BCS-303
De luidsprekers voorbereiden
1. Bevestig antislipkussentjes op de onderkant
van elke luidspreker.
Voor front en surround-luidsprekers:
Bevestig vier kleine antislipkussentjes
met het meegeleverde hechtmiddel
op de onderkant (de bodem) van de
luidsprekerconsoles.
samll non-skid pads
kleine antislipkussentjes
Voor de subwoofer:
Zet vier grote antislipkussentjes met
het meegeleverde hechtmiddel op de
onderkant van de subwoofer vast.
large non-skid pads
grote antislipkussentjes
Voor de middenluidspreker:
Zet vier kleine antislipkussentjes op de
onderkant van de middenluidspreker vast.
samll non-skid pads
kleine antislipkussentjes
2. Sluit de luidsprekerkabels op de speler aan.
Sluit de witte kabel met de grijze lijn op de
(+) zijde aan en de andere kabel op de (-)
zijde. Druk vervolgens op het kunststof lipje
van elk aansluitpunt om dit te openen en
de kabel met de speler te verbinden. Steek
het kabeluiteinde erin en laat het lipje los.
Kleur (+)
Zwart (-)
HB985-DB.BDEUPPK_DUT.indd 18HB985-DB.BDEUPPK_DUT.indd 18 2010-05-14  2:58:022010-05-14  2:58:02
19Installeren
3
Installeren
De middenluidspreker
aan de wand bevestigen
De middenluidspreker is voorzien van een
montageopening die u kunt gebruiken om de
luidspreker aan de wand te bevestigen.
Vóór de montage
Denk eraan dat het luidsprekersysteem zwaar is
en dat de schroeven of het bouwmateriaal van
de wand door dit gewicht los kunnen komen
waardoor de luidspreker valt. Controleer altijd
eerst of de wand waarop u de luidsprekers wilt
bevestigen voldoende sterk is om het gewicht
van de luidsprekers te dragen. Monteer de
luidsprekers niet op wanden van triplex,
multiplex of een ander zacht materiaal.
U moet zelf voor de bevestigingsschroeven
zorgen. Gebruik alleen schroeven die voor de
door u gekozen type wand geschikt zijn en
die sterk genoeg zijn om het gewicht van de
luidsprekers te dragen.
VOORZICHTIG
Als u niet zeker weet met welk wandmateriaal u
te maken hebt en of dit sterk genoeg is, neem
dan contact op met een vakman voor advies.
Pioneer is niet aansprakelijk voor ongevallen of
schade als gevolg van een verkeerde installatie.
5 mm
10 mm
Mounting screw
(not supplied)
Montageschroef
(niet meegeleverd)
Extra informatie over
het ophangen van
luidsprekers
Plaats de linker en rechter hoofdluidsprekers
op gelijke afstanden van de televisie.
Voorzorgsmaatregelen:
Zorg ervoor dat het blote einde van de
luidsprekerkabel in elkaar gedraaid en
helemaal in het aansluitpunt is gestoken.
Als namelijk een van de blote einden van
de luidsprekerkabel contact maken met de
achterkant van de luidspreker bestaat de kans
dat de stroom als veiligheidsmaatregel wordt
uitgeschakeld.
De front-, midden- en surround-luidsprekers
die u bij dit systeem hebt ontvangen, zijn
magnetisch afgeschermd. Afhankelijk van de
montagesituatie is het echter mogelijk dat er
kleurvervorming op het beeldscherm optreedt
als een of meer luidsprekers te dicht bij de
televisie worden gemonteerd.
Schakel als u dit constateert de stroom van
de televisie uit en na 15 tot 30 minuten
weer in. Als u het probleem hierdoor niet
kunt oplossen, moet de u de luidsprekers op
grotere afstand van de televisie hangen. De
subwoofer is niet magnetisch afgeschermd en
mag dus niet dicht bij een televisie of monitor
worden geplaatst. Media die voor magnetisme
gevoelig zijn (zoals  oppy disks en band- of
videocassettes) mogen niet in de buurt van
een subwoofer worden bewaard.
Bevestig de front/surround-luidsprekers en de
subwoofer niet aan de wand of het plafond.
Door hun gewicht kunnen ze vallen en
verwondingen veroorzaken.
5 mm tot 7 mm
HB985-DB.BDEUPPK_DUT.indd 19HB985-DB.BDEUPPK_DUT.indd 19 2010-05-14  2:58:022010-05-14  2:58:02
20 Installeren
Installeren
3
Het systeem opstellen
De volgende afbeelding toont een voorbeeld
van de opstelling van een systeem. U moet er
rekening mee houden dat de afbeeldingen in
deze handleiding omwille van de duidelijkheid
kunnen afwijken van de werkelijke uitvoering
van de apparaten. U bereikt de best mogelijke
surround-sound door alle luidsprekers – met
uitzondering van de subwoofer – op dezelfde
afstand van uw luisterpositie (
A
) te plaatsen.
A
B
D
E
F
A
A
A
A
A
G
C
A
Frontluidspreker linkerzijde (L)
B
Frontluidspreker rechterzijde (R):
Plaats de frontluidsprekers links en rechts van
de tv of de monitor en op dezelfde lijn als het
beeldscherm.
C
Middenluidspreker:
Plaats de middenluidspreker boven of onder
het beeldscherm van de tv of de monitor.
D
Surround-luidsprekers linkerzijde
E
Surround-luidsprekers rechterzijde:
Plaats deze luidsprekers enigszins naar binnen
gericht achter uw luisterpositie.
F
Subwoofer:
De plaats van de subwoofer luistert niet
zo nauw omdat lage tonen nauwelijks
richtinggevoelig zijn. Het is echter beter om de
subwoofer in de buurt van de frontluidsprekers
te plaatsen. Plaats de subwoofer min of
meer naar het midden van de kamer gericht
om geluidsre ecties tegen de wanden te
voorkomen.
G
Speler
VOORZICHTIG
Zorg ervoor dat kinderen niet hun vingers
of voorwerpen in het luidsprekerkanaal
steken. *Luidsprekerkanaal: Resonantieruimte
in de luidsprekerkast die voor een rijke
lagetonenweergave zorgt.
Plaats de middenluidspreker buiten bereik van
kinderen.
Wanneer een luidspreker valt, kan hij worden
beschadigd en lichamelijk letsel en/of materiële
schade veroorzaken.
De luidsprekerboxen bevatten magnetische
onderdelen waardoor de kleurenweergave van
uw tv-scherm of pc-monitorscherm kan worden
vervormd. Plaats de luidsprekerboxen op grotere
afstand van de tv of de pc-monitor.
HB985-DB.BDEUPPK_DUT.indd 20HB985-DB.BDEUPPK_DUT.indd 20 2010-05-14  2:58:032010-05-14  2:58:03
21Installeren
3
Installeren
Aansluitingen op uw
tv
Maak een van de volgende aansluitingen,
afhankelijk van de mogelijkheden van uw
bestaande apparatuur.
HDMI-aansluiting (pagina 21-22)
Component Video-aansluiting (pagina 22)
Videoverbinding (pagina 23)
LET OP
Afhankelijk van de mogelijkheden van de
tv en andere apparaten kunt u de speler op
verschillende manieren aansluiten. Kies één
van de aansluitmogelijkheden die in deze
handleiding beschreven zijn.
Zie de handleiding van uw tv, stereo-installatie
of andere apparaten voor de beste manier van
aansluiten.
Sluit de speler rechtstreeks op de tv aan.
Stem de tv af op het juiste video-ingangskanaal.
Sluit de speler niet aan via een videorecorder.
Het kopieerbeveiligingssysteem kan het beeld
vervormen.
HDMI-aansluiting
Indien u een HDMI TV of monitor heeft, kunt u
deze aansluiten op de speler met behulp van
een HDMI kabel (Type A, versie 1.3). Sluit het
HDMI OUT-aansluitpunt van de speler aan op
het HDMI IN-aansluitpunt van een voor HDMI
geschikte tv of monitor.
HDMI-aansluiting
Player
TV
TV
Speler
Stel de TV bron in op HDMI (zie de handleiding
van de TV).
HB985-DB.BDEUPPK_DUT.indd 21HB985-DB.BDEUPPK_DUT.indd 21 2010-05-14  2:58:032010-05-14  2:58:03
22 Installeren
Installeren
3
LET OP
Er kunnen foutmeldingen ontstaan als u de
resolutie wijzigt terwijl de aansluiting reeds
gemaakt is. Om het probleem op te lossen,
schakelt u de speler uit en weer in.
Indien de HDMI aansluiting met HDCP niet
geveri eerd is, wordt het TV scherm gewijzigd in
een zwart scherm. In dat geval controleert u de
HDMI-aansluiting, of koppelt u de HDMI-kabel
los.
Als ruis (“sneeuw”) of strepen op het
beeldscherm verschijnen, controleer dan de
lengte van de HDMI-kabel (de lengte is meestal
beper
kt tot 4,5 m en u moet een high-speed
HDMI-kabel (versie 1.3) gebruiken).
Als een aangesloten HDMI-apparaat het audio-
uitgangssignaal van de speler niet accepteert,
is het mogelijk dat het geluid van het HDMI-
apparaat is vervormd of niet wordt uitgevoerd.
Als u een HDMI-verbinding gebruikt, kunt u
de resolutie van het HDMI-uitgangssignaal
aanpassen. (Zie “Resolutie instellen” op pagina
23.)
Selecteer het type video-uitvoer van de HDMI-
uitgang met gebruikmaking van de optie
[HDMI Kleur instelling.] in het [Instellen]-menu
(zie pagina 34).
Indien u een HDMI- of DVI-compatibel apparaat
aansluit, controleert u het volgende:
- Schakel het HDMI/DVI toestel en deze speler
uit. Schakel vervolgens het HDMI/DVI toestel
in en wacht ongeveer 30 seconden, schakel
vervolgens deze speler in.
- De video ingang van het aangesloten toestel is
correct ingesteld voor deze speler.
- Het aangesloten apparaat is compatibel met
720x576p (480p), 1280x720p, 1920x1080i of
1920x1080p video-invoer.
Niet alle HDCP compatibele HDMI of DVI
apparaten werken met deze speler.
- Het beeld zal niet correct getoond worden bij
een niet-HDCP-apparaat.
- Deze speler speelt niet af en het TV scherm
wordt gewijzigd een zwart scherm.
Component Video-aansluiting
Verbind de COMPONENT VIDEO OUT
stekkerbussen van de speler met Y Pb Pr-kabels
met de overeenkomstige stekkerbussen op de
tv. U kunt het geluid via de luidspreker van het
systeem weergeven.
Componentaansluiting
Player
TV
Green
Blue
Red
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Speler
Groen
Blauw
Rood
TV
LET OP
Indien u gebruik maakt van een COMPONENT
VIDEO UIT-aansluiting, kunt u de resolutie voor
de uitvoer wijzigen. (Zie “Resolutie instellen op
bladzijde 23.)
HB985-DB.BDEUPPK_DUT.indd 22HB985-DB.BDEUPPK_DUT.indd 22 2010-05-14  2:58:042010-05-14  2:58:04
23Installeren
3
Installeren
Videoverbinding
Sluit de VIDEO UIT stekkerbus van de speler
aan op de video in ingang van de tv. Gebruik
hiervoor een videokabel. U kunt het geluid via
de luidspreker van het systeem weergeven.
Videoverbinding
TV
Yellow
PR
PB
Y
COMPONENT
VIDEO
INPUT
OUTPUT
L
AUX
R
VIDEO
Speler
TV
Geel
Resolutie instellen
De speler voorziet in verschillende
uitvoerresoluties voor HDMI en COMPONENT
VIDEO uitgangen. U kunt de resolutie
aanpassen in het [Instellen]-menu.
1. Druk op HOME MENU (
).
2. Gebruik
I
/
i/U
/
u
om [Instellen] te
selecteren en druk op ENTER (
). Het
installatiemenu verschijnt.
3. Selecteer met
U
/
u
de optie [SCHERM] en
druk vervolgens op
i
om naar het tweede
niveau te gaan.
4. Selecteer met
U
/
u
de optie [Resolutie] en
druk vervolgens op ENTER (
) of
i
om
naar het derde niveau te gaan.
5. Selecteer met
U
/
u
de gewenste instelling
en druk vervolgens op ENTER ( ) om uw
keuze te bevestigen.
LET OP
Als de tv de door u op de speler ingestelde
resolutie niet accepteert, kunt u de resolutie als
volgt op 576p (480p) instellen:
1. Druk op
Z
om de disklade te openen.
2 Druk minstens vijf seconden op
x
.
De resolutie van de video-uitvoer is van
verschillende factoren afhankelijk. Zie “Resolutie
video-uitvoersignaal” op pagina 70.
HB985-DB.BDEUPPK_DUT.indd 23HB985-DB.BDEUPPK_DUT.indd 23 2010-05-14  2:58:042010-05-14  2:58:04
24 Installeren
Installeren
3
Antenneaansluiting
Sluit voor de ontvangst van radio-uitzendingen
de meegeleverde antenne aan.
Antenneaansluiting
Player
Speler
LET OP
Nadat u de fm-draadantenne hebt aangesloten
kunt u deze het best zoveel mogelijk horizontaal
bevestigen.Trek de fm-antenne over de volle
lengte uit.
Op een extern
apparaat aansluiten
AUX-aansluiting
U kunt het geluid van een component
weergeven met gebruikmaking van de
analoge audio-uitgangen van de luidsprekers
van het systeem.
Sluit de analoge audio-uitgangen van de
component aan op de AUX L/R (INGANG) van
het hoofdapparaat. Selecteer vervolgens de
optie [AUX] op INPUT/TUNER,
I
/
i
en druk
vervolgens op ENTER (
).
AUX-aansluiting
Player
To the audio output jacks
of your component
(TV, VCR, etc.)
Red
White
PR
PB
Y
COMPONENT
VIDEO
INPUT
L
AUX
R
VIDEO
Rood
Wit
Speler
Naar de audio-uitgangen
van de component
(tv, videorecorder enz.)
HB985-DB.BDEUPPK_DUT.indd 24HB985-DB.BDEUPPK_DUT.indd 24 2010-05-14  2:58:052010-05-14  2:58:05
25Installeren
3
Installeren
PORTABLE IN-aansluiting
U kunt ook het geluid van uw draagbare audio-
apparaten via de luidsprekers van het systeem
weergeven.
Sluit de hoofdtelefoon- of lijnuitgang van de
draagbare audiospeler aan op de PORT IN-
aansluiting van het hoofdapparaat. Selecteer
vervolgens de optie [PORTABLE] door op
INPUT/TUNER,
I
/
i
en vervolgens op ENTER
(
) te drukken.
PORTABLE IN-aansluiting
twZGSGUUU
MP3-SPELER E.D.
OPTICAL IN 1/2-aansluiting
U kunt het geluid van componenten ook
via de digitale optische aansluiting van de
luidsprekers van het systeem weergeven.
Sluit de optische digitale uitgang van de
betre ende component aan op de OPTICAL
IN 1/2-aansluitpunten van het hoofdapparaat.
Selecteer vervolgens de optie [OPTICAL 1/2]
door op INPUT/TUNER,
I
/
i
en vervolgens op
ENTER (
) te drukken. U kunt ook op OPTICAL
drukken om deze aansluiting rechtstreeks te
selecteren.
Optische verbinding
To the digital
optical output jack
of your component
Naar de digitale
optische uitgang van
de component
HB985-DB.BDEUPPK_DUT.indd 25HB985-DB.BDEUPPK_DUT.indd 25 2010-05-14  2:58:052010-05-14  2:58:05
26 Installeren
Installeren
3
Bluetooth® aansluiting
Informatie over Bluetooth
Bluetooth® is een draadloze
communicatietechnologie voor
korteafstandsverbindingen.
Het bereik gaat tot 10 m. (het geluid kan
worden onderbroken wanneer de verbinding
wordt gestoord door andere elektronische
velden of wanneer u een Bluetooth apparaat in
een andere kamer gebruikt.)
Voor het aansluiten van afzonderlijke apparaten
door middel van draadloze Bluetooth
technologie zijn geen kosten verschuldigd.
Een mobiele telefoon met draadloze Bluetooth
technologie kan via de Cascade worden
gebruikt als de verbinding via draadloze
Bluetooth technologie wordt opgebouwd.
Beschikbare apparaten: Mobiele telefoons,
mp3-spelers, laptops, pda’s (deze apparaten
ondersteunen stereo headsets.)
Bluetooth pro elen
Om Bluetooth draadloze technologie te
gebruiken moeten apparaten bepaalde
pro elen kunnen interpreteren.
Deze speler is compatibel met het volgende
pro el.
A2DP (Advanced Audio Distribution Pro le)
Naar muziek van een Bluetooth
apparaat luisteren
Uw apparaat en een Bluetooth apparaat
koppelen
Zorg ervoor dat voordat u de
koppelingsprocedure begint de Bluetooth
functie op uw Bluetooth apparaat is
ingeschakeld. Zie de handleiding van uw
Bluetooth apparaat. Nadat u de koppeling hebt
opgebouwd, hoeft u deze niet opnieuw uit te
voeren.
1. Selecteer de Bluetooth functie met INPUT/
TUNER of BT AUDIO.
In het a eesvenster verschijnt “BT AUDIO”
en vervolgens “BT READY”.
2. Gebruik het Bluetooth apparaat om de
koppeling uit te voeren. Wanneer u met het
Bluetooth apparaat naar deze speler zoekt,
kan – afhankelijk van het Bluetooth apparaat
- een lijst van gevonden apparaten in het
a eesvenster van het Bluetooth apparaat
verschijnen. Uw speler wordt als
“PIONEER AUDIO” aangeduid.
3. Voer uw pincode in.
Pincode : 0000
4. Wanneer deze speler met uw Bluetooth
apparaat is gekoppeld, licht het Bluetooth
statuslampje van de speler op en verschijnt
in het a eesvenster de tekst “BT SINK”.
LET OP
Sommige apparaten gebruiken een afwijkende
manier van koppelen, afhankelijk van het type
Bluetooth apparaat.
5. Naar muziek luisteren.
Zie de handleiding van uw Bluetooth
apparaat voor het afspelen van op uw
Bluetooth apparaat opgeslagen muziek.
LET OP
Als u de functie van de speler wijzigt, wordt
de Bluetooth functie onderbroken en moet u
opnieuw een koppeling opbouwen.
AVRCP is in deze modus niet beschikbaar.
HB985-DB.BDEUPPK_DUT.indd 26HB985-DB.BDEUPPK_DUT.indd 26 2010-05-14  2:58:062010-05-14  2:58:06
27Installeren
3
Installeren
Informatie van een aangesloten Bluetooth
apparaat controleren
Deze functie wordt na de koppeling gebruikt.
U kunt de Bluetooth informatie controleren.
Druk een paar keer op DISPLAY en houd deze
knop even ingedrukt.
De Bluetooth informatie wordt als volgt
gewijzigd.
Local Bluetooth Device Address
t
Device
Name
t
None
t
...
LET OP
Deze speler ondersteunt geen mono
headsetpro el (handsfree pro el).
Het geluid kan worden onderbroken als de
verbinding door andere elektronische apparaten
wordt gestoord.
U kunt met deze speler geen Bluetooth
apparaten bedienen.
Het koppelen is beperkt tot één Bluetooth
apparaat en het koppelen van meerdere
Bluetooth apparaten wordt niet ondersteund.
Hoewel de afstand tussen uw Bluetooth apparaat
en deze speler maximaal 10 meter is, kan de
verbinding door obstakels tussen de speler en
het Bluetooth apparaat worden gestoord.
Afhankelijk van het type apparaat is het mogelijk
dat u de Bluetooth functie niet kunt gebruiken.
Als de verbinding met het Bluetooth apparaat
wordt onderbroken, verschijnt in het
a eesvenster de tekst “BT READY”.
De verbinding kan ook worden gestoord
doordat andere apparaten in de omgeving -
zoals medische apparatuur, een magnetron
oven of een draadloos LAN netwerk – dezelfde
frequentie als het Bluetooth apparaat gebruiken.
De verbinding kan ook worden onderbroken
doordat iemand tussen de speler en het
Bluetooth apparaat gaat staan.
De geluidskwaliteit wordt minder naarmate
de afstand tussen de speler en het Bluetooth
apparaat groter is en de verbinding kan ten
slotte wegvallen doordat de afstand tussen de
speler en het Bluetooth apparaat te groot wordt.
De verbinding met het Bluetooth apparaat valt
weg als u de speler uitschakelt of als de afstand
tussen de speler en het Bluetooth apparaat
groter is dan 10 meter.
HB985-DB.BDEUPPK_DUT.indd 27HB985-DB.BDEUPPK_DUT.indd 27 2010-05-14  2:58:062010-05-14  2:58:06
28 Installeren
Installeren
3
Aansluiten op uw
thuisnetwerk
U kunt deze speler via de LAN-poort achterop
de speler op een lokaal netwerk (LAN)
aansluiten.
Zie voor nadere aanwijzingen de documentatie
van uw netwerkapparaat.
Sluit de LAN-poort van de speler met een in
de handel verkrijgbare LAN- of Ethernetkabel
(CAT5 of beter met RJ45-connector) aan op
de daarmee overeenkomende poort van
uw modem of router. In de onderstaande
voorbeeldcon guratie voor bedrade
aansluitingen heeft de speler toegang tot
bestanden op alle aangesloten pc’s.
Netwerkverbinding
Broadband
Service
Router
WAN
LAN 1
LAN 2
LAN 3
Player
PC
PC
Router
Breedbanddienst
Speler
LET OP
Houd een LAN-kabel bij het aansluiten en
ontkoppelen altijd bij de stekker vast. Trek bij
het ontkoppelen niet aan de LAN-kabel maar
ontkoppel de kabel terwijl u het blokkeernokje
indrukt.
Sluit geen modulaire telefoonkabel op een LAN-
poort aan.
Omdat er verschillende aansluitingscon guraties
mogelijk zijn, moet u de speci caties van uw
telefoonverbinding of internetleverancier
opvolgen.
Als u toegang wilt krijgen tot bestanden op
pc’s of DLNA-servers moet de speler daarmee
verbinding kunnen maken via een router binnen
hetzelfde LAN (Local Area Network).
HB985-DB.BDEUPPK_DUT.indd 28HB985-DB.BDEUPPK_DUT.indd 28 2010-05-14  2:58:062010-05-14  2:58:06
29Installeren
3
Installeren
Een netwerk installeren
Voordat u het bedrade netwerk installeert,
moet u uw thuisnetwerk op een breedband-
internetverbinding aansluiten.
Als er een DHCP-server via een kabelverbinding
op het LAN-netwerk is aangesloten, krijgt deze
speler automatisch een IP-adres toegewezen.
Bij sommige thuisnetwerken is het nodig de
netwerkinstelling van de speler aan te passen
nadat de fysieke verbinding is opgebouwd. Pas
de [NETWERK]-instelling als volgt aan.
1. Selecteer de optie [Verbindingsinstelling] in
het [Instellen]-menu en druk vervolgens op
ENTER (
).
2. Gebruik
U
/
u
/
I
/
i
om de IP-modus tussen
[Dynamisch] en [Statisch] te selecteren.
Meestal kunt u het best [Dynamisch]
selecteren om automatisch een IP-adres toe
te wijzen.
LET OP
Als er een DHCP-server in het netwerk aanwezig
is en u wilt het IP-adres met de hand instellen,
selecteer dan [Statisch] en stel vervolgens de
opties [IP Adres], [Subnet Mask], [Gateway] en
[DNS Server] met behulp van
U
/
u
/
I
/
i
en de
cijfertoetsen in.Als u bij het invoeren van een
getal een fout maakt, druk dan op CLEAR om het
gemarkeerde gedeelte te wissen.
3. Selecteer [OK] en druk op ENTER ( ) om de
netwerkinstellingen toe te passen.
4. Vervolgens vraagt de speler u de
netwerkverbinding te testen. Selecteer
[OK] en druk op ENTER ( ) om de
netwerkverbinding te voltooien.
5. Als u bij de bovenstaande stap 4 de optie
[Test] selecteert en op ENTER ( ) drukt,
wordt de verbindingsstatus van het netwerk
op het scherm weergegeven.
U kunt het netwerk ook testen met behulp
van de optie [Verbindingsstatus] in het
[Instellen]-menu.
HB985-DB.BDEUPPK_DUT.indd 29HB985-DB.BDEUPPK_DUT.indd 29 2010-05-14  2:58:062010-05-14  2:58:06
30 Installeren
Installeren
3
Belangrijke informatie over
netwerkverbindingen:
Problemen bij het opbouwen van een
netwerkverbinding kunt u vaak oplossen
door de router of de modem te resetten.
Nadat u de speler op het thuisnetwerk hebt
aangesloten, schakelt u de stroom even uit
of maakt u de stroomkabel van de router
van het thuisnetwerk of de kabelmodem
los. Vervolgens schakelt u de stroom weer
in en/of sluit u de stroomkabel weer aan.
Uw internetleverancier (ISP) kan
contractueel bepalen hoeveel voor
internet geschikte apparaten u op één
internetaansluiting mag aansluiten. Neem
voor meer informatie contact op met uw
internetleverancier.
LG Electronics is niet verantwoordelijk
voor storingen in de speler en/of
de internetverbinding ten gevolge
van communicatiefouten/storingen
die verband houden met uw
breedbandinternetaansluiting of andere
aangesloten apparatuur.
De functies van BD-ROM-disks die via een
internetverbinding beschikbaar zijn, worden
niet door ons ontwikkeld of geleverd en
wij zijn dan ook niet verantwoordelijk voor
de functionaliteit of leverbaarheid ervan.
Bepaalde aan disks gerelateerde inhoud
die via een internetaansluiting beschikbaar
kan komen, is mogelijk niet voor met deze
speler geschikt. Als u vragen hebt over
dergelijk materiaal, neem dan contact op
met de producent van de disk.
Bepaald internetmateriaal kan een
internetverbinding met een grotere
bandbreedte vereisen.
Zelfs als de speler op de juiste wijze is
aangesloten en gecon gureerd, is het
mogelijk dat bepaald internetmateriaal
niet op de juiste wijze werkt door
internetopstoppingen, de kwaliteit of de
bandbreedte van uw internetverbinding
of problemen bij de leverancier van het
materiaal.
Het is mogelijk dat een aantal functies van
de internetverbinding niet beschikbaar
is wegens bepaalde beperkingen die
door de leverancier van uw breedband-
internetverbinding (ISP) zijn ingesteld.
Alle kosten, inclusief de kosten van
telefoonverbindingen die door uw
internetleverancier aan u in rekening
worden gebracht, komen voor uw rekening.
Voor een kabelaansluiting op deze speler
is een 10 Base-T of 100 Base-TX LAN-poort
nodig. Als uw internetleverancier een
dergelijke aansluiting niet toestaat, kunt u
de speler niet aansluiten.
Voor het gebruik van een xDSL-service
moet u een router aansluiten.
Voor het gebruik van DSL-diensten is
een DSL-modem vereist en voor het
gebruik van kabelmodemdiensten is
een kabelmodem vereist. Afhankelijk
van de toegangsmethode van, en de
abonnementsovereenkomst met, uw
internetleverancier is het mogelijk dat u
de internetverbindingsfunctie van deze
speler niet kunt gebruiken of dat uw
internetleverancier beperkingen heeft
gesteld aan het aantal apparaten dat
u gelijktijdig kunt aansluiten. (Als uw
internetleverancier de met u gesloten
abonnementsovereenkomst tot één
apparaat heeft beperkt, is het mogelijk
dat u deze speler niet op het internet kunt
aansluiten als u al een pc op het internet
hebt aangesloten.)
Mogelijk is het gebruik van een router niet
of slechts onder beperkende voorwaarden
toegestaan, afhankelijk van het beleid van
uw internetleverancier en de door deze
bedongen beperkingen. Neem voor meer
informatie rechtstreeks contact op met uw
internetleverancier.
Schakel alle niet gebruikte
netwerkapparaten in uw thuisnetwerk
(LAN) uit. Sommige apparaten kunnen
netwerkverkeer veroorzaken.
HB985-DB.BDEUPPK_DUT.indd 30HB985-DB.BDEUPPK_DUT.indd 30 2010-05-14  2:58:062010-05-14  2:58:06
31Installeren
3
Installeren
Usb-apparaat
aansluiten
De speler kan op een usb-geheugenstick
opgeslagen  lms, muziek en fotobestanden
afspelen.
1. Plaats de usb-geheugenstick in de usb-
poort en zet hem goed vast.
Usb-aansluiting
2. Druk op HOME MENU.
Selecteer met
U
/
u
/
I
/
i
, de optie [Film],
[Foto] of [Muziek] en druk op ENTER ( ).
3. Selecteer een bestand met
U
/
u
/
I
/
i
, en
druk op PLAY of ENTER (
) om het bestand
af te spelen.
De vrij beschikbare ruimte op de
usb-geheugenstick kunt u op het
beeldscherm controleren.
4. Selecteer een andere modus. Maak de usb-
geheugenstick vervolgens voorzichtig los.
LET OP
Voor het openen van bestanden ( lm, foto
en muziek) ondersteunt deze speler usb-
ashgeheugens en volgens FAT 16, FAT 32 en
NTFS geformatteerde harde disks (HDD). Voor
het opnemen van BD-LIVE en audio-cd’s worden
alleen volgens FAT 16 en FAT 32 geformatteerde
media ondersteund. Gebruik het usb-
ashgeheugen of een externe HDD die volgens
FAT16 of FAT32 zijn geformatteerd wanneer u
BD-LIVE of audio-cd’s wilt opnemen.
U kunt een usb-apparaat gebruiken voor
plaatselijke opslag van BD-Live disks via het
internet.
Dit apparaat ondersteunt totaal vier partities van
een usb-apparaat.
Ontkoppel nooit een usb-apparaat als de speler
ingeschakeld is (afspelen, kopiëren e.d.).
Usb-apparaten die na aansluiting op een
computer de installatie van extra programmas
vereisen, worden niet ondersteund.
Usb-apparaat: Usb-apparaat dat USB 1,1 en USB
2,0 ondersteunt.
Film-, muziek- en fotobestanden kunnen worden
afgespeeld. Voor informatie over gebruik van elk
bestand kijkt u op de relevante bladzijdes.
We raden het regelmatig maken van back-ups
aan om gegevensverlies te voorkomen.
Als u een usb-verlengkabel, een usb-hub of een
usb-multireader gebruikt, is het mogelijk dat de
usb-geheugenstick niet wordt herkend.
Sommige usb-apparaten zijn niet geschikt voor
dit apparaat.
Digitale cameras en mobiele telefoons worden
niet ondersteund.
De usb-poort van deze speler kan niet op een
pc worden aangesloten.
HB985-DB.BDEUPPK_DUT.indd 31HB985-DB.BDEUPPK_DUT.indd 31 2010-05-14  2:58:062010-05-14  2:58:06
32 Installeren
Installeren
3
Instellingen
De setup-instellimgen
aanpassen
U kunt de instellingen van de speler in het
[Instellen]-menu aanpassen.
1. Druk op HOME MENU (
).
2. Gebruik
I
/
i/U
/
u
om [Instellen] te
selecteren en druk op ENTER ( ). Het
installatiemenu verschijnt.
3. Selecteer de eerste setup-optie met
U
/
u
en druk op
i
om naar het tweede niveau te
gaan.
4. Gebruik
U
/
u
om een tweede setup-optie te
selecteren en druk op ENTER (
) om naar
het derde niveau te gaan.
5. Selecteer de gewenste instelling met
U
/
u
en druk op
i
of ENTER ( ) om uw keuze te
bevestigen.
HB985-DB.BDEUPPK_DUT.indd 32HB985-DB.BDEUPPK_DUT.indd 32 2010-05-14  2:58:062010-05-14  2:58:06
33Installeren
3
Installeren
[SCHERM]-menu
Beeldverhouding
Selecteer de hoogte-breedteverhouding
(aspect ratio) die met uw tv overeenstemt.
[4:3 Letter Box]
Selecteer deze optie wanneer een
standaard 4:3-tv is aangesloten. Shows,
theatervoorstellingen e.d. worden met
zwarte balken aan de boven- en onderkant
van het beeld weergegeven.
[4:3 Pan Scan]
Selecteer deze optie wanneer een
standaard 4:3-tv is aangesloten. Het tv-
beeld wordt beeldvullend weergegeven. Bij
deze optie wordt het tv-beeld echter links
en rechts aangesneden.
[16:9 Origineel]
Selecteer deze optie wanneer een
standaard 4:3-tv is aangesloten. Het tv-
beeld wordt beeldvullend weergegeven. Bij
deze optie wordt het tv-beeld echter links
en rechts aangesneden.
[16:9 Volledig]
Selecteer wanneer een 16:9 breedbeeld-
tvaangesloten is. Het 4:3 beeld wordt
weergegeven met een oorspronkelijke 4:3
hoogte/breedte-verhouding, met zwarte
balken aan de linker en rechter kant.
LET OP
De opties [4:3 Letter Box] en [4:3 Pan Scan] zijn niet
beschikbaar wanneer u een hogere resolutie dan
720p kiest.
Resolutie
Hiermee stelt u de uitgangsresolutie van het
HDMI- en Component-Video-signaal in.
Zie pagina 23 en 70 voor meer informatie over
de inst
elling van de resolutie.
[Auto]
Indien uw HDMI ingang is aangesloten
op de TV voor het verstrekken van
scherminformatie (EDID), wordt
automatisch de resolutie die het best bij
de aangesloten TV past, geselecteerd.
Indien de COMPONENT VIDEO UIT alleen
aangesloten is, wijzigt dit de standaard
resolutie naar 1080i als standaard.
[1080p]
Stuurt progressieve video van 1080 lijnen
uit.
[1080i]
Stuurt geïnterlinieerde video van 1080
lijnen uit.
[720p]
Stuurt progressieve video van 720 lijnen uit.
[576p (480p)]
Stuurt progressieve video van 576 (480)
lijnen uit.
[576i (480i)]
Stuurt geïnterlinieerde video van 576 (480)
lijnen uit.
HB985-DB.BDEUPPK_DUT.indd 33HB985-DB.BDEUPPK_DUT.indd 33 2010-05-14  2:58:072010-05-14  2:58:07
34 Installeren
Installeren
3
1080p fullHD beeld
Indien de resolutie ingesteld is op 1080p,
selecteert u [24 Hz] voor een vloeiende
weergave van  lmmateriaal (1080p/24 Hz) op
een HDMI uitgerust scherm dat compatibel is
met 1080p/24 Hz invoer.
LET OP
Wanneer u [24 Hz] selecteert, moet u rekening
houden met de mogelijkheid van enige
beeldstoring wanneer de video overschakelt
tussen video- en  lmmateriaal. Als dat het geval
is, selecteert u [50 Hz].
Zelfs indien het [1080p fullHD beeld] is ingesteld
op [24 Hz] zal de werkelijke beeldfrequentie van
de video uitvoer 50 Hz bedragen volgens het
videobronformaat, indien uw TV niet compatibel
is met 1080p/24 Hz.
HDMI Kleur instelling.
Selecteer het type uitvoer van de HDMI UIT
stekker. Voor deze instelling kijkt u in de
handleidingen van uw weergavetoestel.
[YCbCr]
Selecteer deze optie bij het aansluiten op
een HDMI tv of monitor.
[RGB]
Selecteer deze optie bij het aansluiten op
een DVI (RGB) tv of monitor..
[TAAL]-menu
Schermmenu
Selecteer een taal voor het menu [Instellen] en
de weergave op het scherm.
Disk Menu/Audio disk/
Disk ondertiteling
Selecteer de taal die u voor het audionummer
(geluid op de disk), de ondertiteling en het disk
menu wilt gebruiken.
[Origineel]
Verwijst naar de oorspronkelijke taal die op
de disk is opgenomen.
[Anders]
Druk op ENTER (
) om een andere taal te
selecteren. Gebruik de nummertoetsen
en vervolgens ENTER ( ) om de
overeenkomende 4-cijferige code in te
voeren volgens de taalcodelijst op bladzijde
69.
[Uit] (alleen voor diskondertitels)
Schakelt de ondertiteling uit.
LET OP
Afhankelijk van het type disk is het mogelijk dat de
door u gekozen taalinstelling niet werkt.
HB985-DB.BDEUPPK_DUT.indd 34HB985-DB.BDEUPPK_DUT.indd 34 2010-05-14  2:58:072010-05-14  2:58:07
35Installeren
3
Installeren
[AUDIO]-menu
Luidspreker Set-up
U bereikt de best mogelijke geluidsweergave
met behulp van het scherm voor
luidsprekeropstelling om vervolgens
het geluidsvolume van de aangesloten
luidsprekers en de afstand van de luidsprekers
tot de luisterpositie in te stellen. Maak gebruik
van de test om het geluidsvolume van de
luidsprekers op een gelijk niveau af te stellen.
[Luidspreker]
Hiermee selecteert u een luidspreker die u
wilt afstellen.
[Volume]
Hiermee past u het geluidsvolume van elke
luidspreker afzonderlijk aan.
[Afstand]
Hiermee kunt u de ideale afstand tussen de
luidsprekers afzonderlijk en de luisterpositie
bepalen.
[Teste/ Stop testoon]
De luidsprekers zenden een testtoon uit.
[OK]
Hiermee bevestigt u de instelling.
[Annuleren]
Hiermee maakt u de instelling ongedaan.
HD AV Sync
Soms komt bij digitale tv een vertraging tussen
beeld en geluid voor. Als u dit constateert, kunt
u dit verschijnsel compenseren door voor het
geluid een vertraging in te stellen waardoor het
geluid daadwerkelijk “wacht op het bijbehorende
beeld. Dit wordt HD AV-synchronisatie genoemd.
Met behulp van
U u
kunt u de mate van
vertraging vergroten en verkleinen die u traploos
kunt instellen tussen 0 en 300 m/sec.
De vertraging is afhankelijk van het digitale
tv-kanaal waarop uw tv is afgestemd.
Het is mogelijk dat u een andere HD AV-
synchronisatie moet instellen wanneer u een
ander kanaal kiest.
DRC (Dynamic Range Control)
Tijdens het afspelen van een disk die in Dolby
Digital of Dolby Digital Plus is gecodeerd, kunt
u het dynamische bereik van het audiosignaal
comprimeren (d.w.z. het verschil tussen de
sterkste en zwakste geluiden verkleinen).
Hierdoor kunt u bijvoorbeeld het geluid
van een  lm met een lager geluidsvolume
beluisteren zonder dat het geluid minder
helder wordt. Om dit e ect te bereiken stelt u
DRC in op [aan].
LET OP
U kunt de DRC-instelling alleen wijzigen wanneer
er geen disk in het apparaat aanwezig is of
wanneer het apparaat volledig is gestopt.
HB985-DB.BDEUPPK_DUT.indd 35HB985-DB.BDEUPPK_DUT.indd 35 2010-05-14  2:58:072010-05-14  2:58:07
36 Installeren
Installeren
3
[SLOT]-menu
Om toegang te krijgen tot functies in [SLOT]-
instellingen moet u de beveiligingscode van
vier cijfers invoeren die u hebt gemaakt.
Als u nog geen wachtwoord hebt ingevoerd,
wordt u dit nu gevraagd. Voer een wachtwoord
van vier cijf
ers tweemaal in en druk up ENTER
(
) om een nieuw wachtwoord aan te maken.
Wachtwoord
U kunt een wachtwoord aanmaken of een
bestaand wachtwoord wijzigen.
[Geen]
Voer een wachtwoord van vier cijfers
tweemaal in en druk up ENTER (
) om een
nieuw wachtwoord aan te maken.
[Wijzig]
Voer het huidige wachtwoord in en druk op
ENTER (
). Voer een wachtwoord van vier
cijfers tweemaal in en druk up ENTER (
)
om een nieuw wachtwoord aan te maken.
LET OP
Als u een fout maakt voordat u op ENTER
( )
hebt
gedrukt, druk dan op CLEAR. Voer vervolgens het
juiste wachtwoord in.
Indien u uw wachtwoord bent
vergeten,
U kunt het wachtwoord wissen, indien u dit hebt
vergeten, door de volgende stappen uit te voeren:
1. Verwijder de disk die eventueel in de speler
aanwezig is.
2.
Selecteer de optie [Slot] in het menu [Instellen].
3. Gebruik de cijfertoetsen om “210499” in het
[Slot] menu in te voeren. Het wachtwoord
wordt gewist.
DVD Beoordeling
Blokkeert het afspelen van geclassi ceerde
dvd’s op grond van hun inhoud. (Niet alle disks
zijn geclassi ceerd.)
[Waardering 1-8]
Censuurcijfer één (1) heeft de hoogste
beperkingen en censuurcijfer acht (8) de
laagste.
[Ontgrendelen]
Als u dit selecteert, is het ouderlijk toezicht
(“parental control”) niet actief en wordt de
disk volledig afgespeeld.
BD Beoordeling
Stelt leeftijdsgrens voor het afspelen van een
BD-ROM in. Gebruik de cijferknoppen om een
leeftijdsgrens in te voeren voor het bekijken
van BD-ROM’s.
[255]
De hele BD-ROM kan worden afgespeeld.
[0-254]
Maakt het onmogelijk de BD-ROM waarop
de betre ende leeftijdsgrens is vastgelegd
af te spelen.
LET OP
De [BD Beoordeling] is alleen van toepassing op
BD-disks met Advanced Rating Control.
Regiocode
Voer de code in van de regio waarvan de
normen zijn gebruikt om aan de DVD Video-
disk een waarde toe te kennen die gebaseerd
is op de lijst op pagina 68.
HB985-DB.BDEUPPK_DUT.indd 36HB985-DB.BDEUPPK_DUT.indd 36 2010-05-14  2:58:072010-05-14  2:58:07
37Installeren
3
Installeren
[NETWERK]-menu
Verbindingsinstelling
Als uw thuisnetwerkomgeving klaar is voor
het aansluiten van de speler, moet de speler
worden ingesteld op netwerkcommunicatie.
(Zie Aansluiten op uw thuisnetwerk op pagina
28.)
Verbindingsstatus
Als u op deze speler de netwerkstatus
wilt controleren, selecteert u de optie
[Verbindingsstatus] en drukt u op ENTER ( )
om te controleren of een verbinding met het
netwerk en het internet is opgebouwd.
BD-LIVE aansluiting
U kunt de internettoegang beperken indien de
BD-LIVE functies gebruikt worden.
[Toegestaan]
Internettoegang is toegestaan voor alle
BD-LIVE inhoud.
[Deels toegestaan]
Internettoegang is alleen toegestaan voor
BD-LIVE inhoud waarvan de eigenaar
bekend is. Internettoegang en AACS Online
functies zijn verboden voor alle BD-LIVE
inhoud zonder certi caat.
[Verboden]
Internettoegang is verboden voor alle BD-
LIVE inhoud.
[ANDERS]-menu
DivX VOD
INFORMATIE OVER DIVX VIDEO DivX® is een
digitaal videoformaat dat door DivX, Inc. is
ontwikkeld. De speler die in deze handleiding
wordt uitgelegd is een o cieel door DivX
gecerti ceerd apparaat dat geschikt is voor de
weergave van DivX video. Ga naar
www.divx.com voor meer informatie en
softwaretools voor het omzetten van uw
beeldbestanden in DivX.
INFORMATIE OVER VIDEO-ON-DEMAND: Voor
het afspelen van DivX Video-on-Demand
(VOD) materiaal moet dit DivX Certi ed®-
apparaat worden geregistreerd.
Ga voor het genereren van de registratiecode
naar het hoofdstuk over DivX VOD in het
installatiemenu van het apparaat. Ga met deze
code naar de website vod.divx.com om de
registratieprocedure te voltooien en voor meer
informatie over DivX VOD.
[Registreren]
Toont de registratiecode van uw speler.
[Deregistreren]
Deactiveert de speler en toont de
deactivatiecode.
LET OP
Alle met de registratiecode van deze speler van
DivX VOD (Video on Demand) gedownloade
videobestanden kunnen alleen op deze speler
worden afgespeeld.
HB985-DB.BDEUPPK_DUT.indd 37HB985-DB.BDEUPPK_DUT.indd 37 2010-05-14  2:58:072010-05-14  2:58:07
38 Installeren
Installeren
3
Auto Power uitschakelen
De screensaver verschijnt wanneer u het
systeem ongeveer vijf minuten in de stopstand
laat staan. Als u deze optie op [aan] instelt,
schakelt de speler zichzelf uit nadat de
screensaver 25 minuten op het beeldscherm is
weergegeven.
Als u deze optie op [uit] instelt, blijft de
screensaver actief tot u het apparaat bedient.
Initialiseren
Fabrieksinstelling
Hierdoor wordt de speler naar zijn
oorspronkelijke fabrieksinstellingen
teruggezet.
BD opslag wissen
Verwijdert de BD-inhoud van de
aangesloten usb-geheugenstick.
LET OP
Als u de speler met de optie [Fabrieksinstelling]
naar zijn oorspronkelijke fabrieksinstellingen
terugzet, moet u de activering van alle on-line
diensten en de netwerkinstellingen opnieuw
instellen.
Software info
Toont de huidige softwareversie.
HB985-DB.BDEUPPK_DUT.indd 38HB985-DB.BDEUPPK_DUT.indd 38 2010-05-14  2:58:072010-05-14  2:58:07
39Installeren
3
Installeren
Geluidse ecten
U kunt naar eigen wens een bepaalde
geluidsmodus instellen. Druk een paar keer
op SOUND tot de gewenste geluidsmodus
op n het display aan de voorkant van het
apparaat of op het tv-scherm zichtbaar is. De
weergegeven onderwerpen voor de equalizer
kunnen verschillen, afhankelijk van de gekozen
geluidsbronnen en e ecten.
[Pioneer 1]: Geeft u passende geluidsinstelling
met het verbinden van het kleine type
speakers (S-BD303).
[Pioneer 2]: Geeft u passende geluidsinstelling
met het verbinden van het hoge type speakers
(S-BD707T).
[Bypass]: Software met meerkanaals surround-
sound wordt volgens de oorspronkelijke
opname weergegeven.
[Bass Blast]: In deze stand worden de lage
tonen van de linker en rechter frontluidsprekers
en van de subwoofer extra versterkt.
[PL ll Movie]: Geluidskleur die speciaal is
afgestemd op decodering van het signaal van
de Pro Logic III  lmmodus. Deze maakt het
mogelijk vijf uitvoerkanalen met een volledige
bandbreedte te creëren met gebruikmaking
van slechts twee kanaalbronnen. Deze stand
is ideaal voor het bekijken van video’s van
overgedubde of oudere  lms. Deze stand
is alleen geschikt voor het afspelen van
tweekanaals bronmateriaal.
[PL ll Music]: Geluidskleur die speciaal is
afgestemd op decodering van het signaal
van de Pro Logic II muziekmodus. Creëert
vijf uitvoerkanalen met een volledige
bandbreedte met gebruikmaking van slechts
twee kanaalbronnen. Deze stand is ideaal
voor normale stereobronnen zoals cd’s. Deze
modus is alleen geschikt voor het afspelen van
tweekanaals bronmateriaal.
[Clear Voice]: Met behulp van deze modus
wordt het geluid van de menselijke stem
bijzonder helder weergegeven.
[Game]: Deze stand is speciaal ontwikkeld
voor een dynamische geluidsweergave van
videogames.
[Night]: Als u in de late uren  lms wilt kijken
zonder anderen te storen, is dit de ideale stand.
[Mus. ReTouch]: Stand waarmee u de kwaliteit
van het geluid kunt verbeteren bij het
luisteren naar mp3-muziekbestanden en ander
gecomprimeerd geluid. Deze modus is alleen
geschikt voor het afspelen van tweekanaals
bronmateriaal.
[Loudness]: Hierdoor kunt u de weergave van
de hoge en lage tonen verbeteren.
HB985-DB.BDEUPPK_DUT.indd 39HB985-DB.BDEUPPK_DUT.indd 39 2010-05-14  2:58:072010-05-14  2:58:07
40 Bediening
Bediening
4
Afspelen in het
algemeen
Disks afspelen
1. Druk op
Z
OPEN/CLOSE en leg een disk in
de disklade.
2. Druk op
Z
OPEN/CLOSE om de disklade te
sluiten.
Bij de meeste audio-cd’s, bd-rom- en cd-
romdisks start het afspelen automatisch.
3. Druk op
HOME MENU.
4. Selecteer [Film], [Foto] of [Muziek] met
U
/
u
/
I
/
i
, en druk op ENTER ( ).
5. Selecteer met
I
/
i
de optie Disk en druk op
ENTER (
).
Wanneer u een of twee apparaten aansluit,
ontstaat de bovenstaande situatie.
6. Selecteer een bestand met
U
/
u
/
I
/
i
en
druk op
B
PLAY of ENTER (
) om het
bestand af te spelen.
LET OP
De in deze handleiding beschreven
afspeelfuncties zijn niet voor alle bestanden
en media beschikbaar. Afhankelijk van allerlei
factoren kunnen bepaalde functies beperkt
beschikbaar zijn.
Afhankelijk van de BD-ROM titels is het mogelijk
dat u een usb-aansluiting nodig hebt om het
bestand af te kunnen spelen.
4
Bediening
HB985-DB.BDEUPPK_DUT.indd 40HB985-DB.BDEUPPK_DUT.indd 40 2010-05-14  2:58:072010-05-14  2:58:07
41Bediening
4
Bediening
Afspelen stoppen
Druk tijdens het afspelen op
x
STOP.
Afspelen pauzeren
Druk tijdens het afspelen op
X
PAUSE/STEP.
Druk op
B
PLAY om het afspelen te hervatten.
Beeld-voor-beeld afspelen
Druk tijdens het afspelen van een  lm op
X
PAUSE/STEP.
Druk herhaaldelijk op
X
PAUSE/STEP om frame
voor frame af te spelen.
Vooruit of achteruit scannen
Druk op
m
of
M
om tijdens afspelen snel
naar voren of achteren te spoelen.
U kunt de verschillende afspeelsnelheden
veranderen door herhaaldelijk op
m
of
M
te drukken.
Speelsnelheid vertragen
U kunt verschillende slowmotion-snelheden
kiezen door terwijl het afspelen is gepauzeerd
een paar keer op
M
te drukken.
Naar het volgende of vorige
hoofdstuk, nummer of bestand
overspringen
Druk tijdens het afspelen op
.
of
>
om naar het volgende hoofdstuk/nummer/
bestand of nummer te gaan of om terug
te gaan naar het begin van het lopende
hoofdstuk/nummer/bestand.
Druk tweemaal kort op
.
om terug te gaan
naar het vorige hoofdstuk/nummer/bestand of
nummer.
Diskmenu gebruiken
BD
DVD
AVCHD
Diskmenu weergeven
Nadat u een disk die een menu bevat hebt
geladen, verschijnt meestal eerst het diskmenu.
ls u het diskmenu tijdens het afspelen wilt
weergeven, drukt u op MENU.
Met de
U
/
u
/
I
/
i
knoppen kunt u door de
menuonderwerpen navigeren.
Pop-upmenu weergeven
Sommige BD-ROM-disks bevatten pop-
upmenu’s die tijdens het afspelen verschijnen.
Druk tijdens het afspelen op POPUP/ TOP
MENU en gebruik de
U
/
u
/
I
/
i
knoppen om
door de menuonderwerpen te navigeren.
HB985-DB.BDEUPPK_DUT.indd 41HB985-DB.BDEUPPK_DUT.indd 41 2010-05-14  2:58:082010-05-14  2:58:08
42 Bediening
Bediening
4
Afspelen hervatten
BD
DVD
AVCHD
MOVIE
ACD
MUSIC
Afhankelijk van de disk slaat het apparaat het
punt op waar u op
x
(STOP) hebt gedrukt.
Druk op
B
(PLAY) om het afspelen (vanaf
het opgeslagen punt) te hervatten wanneer
Xx
(Afspelen hervatten)” kortstondig op het
scherm verschijnt.
Als u tweemaal op
x
(STOP) drukt of de disk uit
de disklade verwijdert, verschijnt
x
(Volledige
stop) op het scherm. Hierbij wordt het
opgeslagen stoppunt door het apparaat gewist.
LET OP
Het hervattingspunt kan worden gewist
wanneer u een knop indrukt (bijvoorbeeld:
1
(POWER),
Z
(OPEN/CLOSE), etc).
De functie voor afspelen hervatten werkt niet bij
BD-Video-disks met BD-J.
Als u tijdens het afspelen van een interactieve bd-
rom-tiitel één keer op
x
(STOP) drukt, wordt het
apparaat volledig uitgeschakeld (Complete Stop).
Geavanceerd afspelen
Afspelen herhalen
BD
DVD
AVCHD
ACD
MUSIC
Druk tijdens het afspelen een paar keer op
REPEAT (
) om de gewenste
herhalingsmodus te selecteren.
BD’s / DVD’s
A-
– Het geselecteerde gedeelte wordt
continu herhaald.
Hoofdstuk
– Het momenteel
geselecteerde hoofdstuk wordt continu
herhaald.
Title
Titel
– De momenteel geselecteerde
titel wordt continu herhaald.
Druk een paar keer op REPEAT (
) om [uit]
te selecteren en naar normaal afspelen
terug te gaan.
Audio-cd’s / muziekbestanden
– Het geselecteerde nummer of
bestand wordt continu herhaald.
– Alle nummers of bestanden
worden continu herhaald.
– De nummers of bestanden worden in
willekeurige volgorde afgespeeld.
– Alle nummers of bestanden
worden herhaald in willekeurige volgorde
afgespeeld.
– Het geselecteerde gedeelte wordt
continu herhaald. (Alleen audio-cds)
Druk op CLEAR om naar de normale
afspeelsnelheid terug te gaan.
LET OP
Als u tijdens [Repeat Chapter/Track] (Hoofdstuk/
nummer herhalen) eenmaal op
>
drukt, wordt de functie Afspelen herhalen
geannuleerd.
Bij bepaalde disks en titels werkt deze functie niet.
HB985-DB.BDEUPPK_DUT.indd 42HB985-DB.BDEUPPK_DUT.indd 42 2010-05-14  2:58:082010-05-14  2:58:08
43Bediening
4
Bediening
Een bepaald gedeelte herhalen
BD
DVD
AVCHD
ACD
Deze speler kan een door u geselecteerd
gedeelte van een bestand herhalen.
1. Druk tijdens het afspelen op REPEAT (
)
om [A-] te selecteren aan het begin van het
gedeelt
e dat u wilt herhalen. Druk
vervolgens op ENTER ( ).
2. Druk aan het einde van het gedeelte
op ENTER (
). Het gedeelte dat u hebt
geselecteerd wordt nu continu herhaald.
3. Om naar normaal afspelen terug te gaan
drukt u een paar k
eer op REPEAT ( ) om
[uit] te selecteren of drukt u op CLEAR.
LET OP
U kunt geen gedeelte selecteren dat korter is dan 3
seconden.
Markeringen zoeken
BD
DVD
AVCHD
MOVIE
U kunt beginnen met afspelen vanaf een totaal
van negen punten die u in het geheugen.
Een markering invoeren
1. Druk tijdens het afspelen op het gewenste
punt op MARKER. Het markeerpictogram
verschijnt even op het tv-scherm.
2. Door stap 1 te herhalen kunt u totaal negen
markeringen toevoegen.
Gemarkeerde scènes terugzoeken
1. Druk op SEARCH en het Markering Zoeken
menu wordt geopend.
2. Druk op een nummertoets om een
markeringnummer dat u wilt oproepen,
te selecteren. Het afspelen start vanaf de
gemarkeerde scène.
Markeringen wissen
1. Druk op SEARCH en het Markering Zoeken
menu wordt geopend.
2. Druk op
u
om een markeringsnummer
te markeren. Selecteer met
I
/
i
de
gemarkeerde scène die u wilt wissen.
3. Druk op CLEAR om de gemarkeerde
scène van het Marker Zoeken menu te
verwijderen.
LET OP
Soms werkt deze functie niet, afhankelijk van de
disks, titels en mogelijkheden van de server.
Als de betre ende titel zich de Complete Stop-
modus (
x
) bevindt, is gewijzigd of als u de disk
uit de speler haalt, worden alle gemarkeerde
punten gewist.
Als de totale lengte van de titel minder dan 10
seconden is, is deze functie niet beschikbaar.
HB985-DB.BDEUPPK_DUT.indd 43HB985-DB.BDEUPPK_DUT.indd 43 2010-05-14  2:58:082010-05-14  2:58:08
44 Bediening
Bediening
4
Zoekmenu gebruiken
BD
DVD
AVCHD
MOVIE
Met behulp van het zoekmenu kunt u het punt
waar u het afspelen wilt starten gemakkelijk
terugvinden.
Een punt opzoeken
1. Tijdens afspelen drukt u op SEARCH om het
menu Search weer te geven.
2. Druk op
I
/
i
om afspelen 15 seconden
naar voren of achteren te halen. U kunt een
punt selecteren dat u wilt overslaan door de
knop
I
/
i
in te drukken en vast te houden.
Het afspelen vanaf een gemarkeerde
scène starten
1. Druk op SEARCH en het Markering Zoeken
menu wordt geopend.
2. Druk op
u
om een markeringsnummer
te markeren. Selecteer met
I
/
i
de
gemarkeerde scène die u wilt afspelen.
3. Druk op ENTER (
) om het afspelen vanaf
de gemarkeerde scène te starten.
LET OP
Soms werkt deze functie niet, afhankelijk van de
disks, titels en mogelijkheden van de server.
Afhankelijk van het bestandstype en de
mogelijkheden van de DLNA-server is het
mogelijk dat deze functie bij bepaalde
[Homelink] inhoud niet werkt.
Laatste scène-geheugen
BD
DVD
Deze speler legt de laatst afgespeelde scène
van de laatst afgespeelde disk in zijn geheugen
vast. De laatste scène blijft in het geheugen
aanwezig, ook als u de disk uit de speler
neemt of de speler uitschakelt. Als u een disk
laadt waarvan een scène is het geheugen is
opgeslagen, wordt deze scène automatisch
opgeroepen.
LET OP
De functie Laatste Scène Geheugen voor een
vorige disk wordt gewist zodra er een andere
disk afgespeeld wordt.
Deze functie werkt, afhankelijk van de disk,
misschien niet.
De speler onthoudt geen instellingen van een
disk als u de speler uitschakelt voordat het
afspelen van de disk is gestart.
HB985-DB.BDEUPPK_DUT.indd 44HB985-DB.BDEUPPK_DUT.indd 44 2010-05-14  2:58:082010-05-14  2:58:08
45Bediening
4
Bediening
Beeldscherminformatie
(OSD)
U kunt verschillende soorten informatie óver
en instellingen van de inhoud weergeven en
aanpassen.
Inhoudsinformatie op het
beeldscherm weergeven
BD
DVD
AVCHD
MOVIE
1. Druk tijdens het afspelen op DISPLAY
(
) om verschillende soorten informatie
over het afspelen weer te geven.
a
h
g
f
e
d
c
b
a
Titel – nummer van huidige titel / totaal
aantal bestanden.
b
Hoofdstuk – Huidige
hoofdstuknummer/totaal aantal
hoofdstukken.
c
Tijd – verstreken speeltijd / totale
afspeeltijd.
d
Audio – Geselecteerde audiotaal of
-kanaal.
e
Ondertiteling – Geselecteerde
ondertiteling.
f
Hoek – Geselecteerde
camerastandpunten/ totaal aantal
standpunten.
g
Beeldverhouding – geselecteerde
hoogte-breedteverhouding van het tv-
beeld.
h
Beeldmodus – geselecteerde
beeldmodus.
2. Selecteer een optie met
U
/
u
.
3. Gebruik
I
/
i
om de geselecteerde
optiewaarde aan te passen.
4. Druk op RETURN (
O
) om het OSD-
beeldschermmenu te sluiten.
LET OP
Als u een paar seconden lang geen knop
indrukt, verdwijnt het on-screen scherm.
Een titelnummer kan bij sommige disks niet
geselecteerd worden.
Afhankelijk van de disks en de titels kunnen de
beschikbare onderwerpen variëren.
Tijdens het afspelen van een interactieve BD-
titel wordt bepaalde installatie-informatie
weergegeven doch deze kan niet worden
gewijzigd.
HB985-DB.BDEUPPK_DUT.indd 45HB985-DB.BDEUPPK_DUT.indd 45 2010-05-14  2:58:082010-05-14  2:58:08
46
Bediening
Bediening
4
Geprogrammeerde perioden
afspelen
BD
DVD
AVCHD
MOVIE
1. Druk tijdens afspelen op DISPLAY (
).
Het tijdzoekvak toont de verstreken
afspeeltijd.
2. Selecteer de optie [Tijd] en voer dan
de vereiste starttijd in uren, minuten en
seconden in van links naar rechts.
Om bijvoorbeeld een scène op 2 uur, 10
minuten en 20 seconden te vinden, voert u
“21020” in.
Druk op
I
/
i
om afspelen 60 seconden
naar voren of achteren te halen.
3. Druk op ENTER (
) om het afspelen vanaf
het geselecteerde tijdstip te starten.
LET OP
Deze functie is niet bij alle disks of titels
beschikbaar.
Afhankelijk van het bestandstype en de
mogelijkheden van de DLNA-server is het
mogelijk dat deze functie bij bepaalde
[Homelink] inhoud niet werkt.
Een ander audiosignaal
beluisteren
BD
DVD
AVCHD
MOVIE
1. Druk tijdens het afspelen op DISPLAY
(
) om het OSD (On-Screen Display)
beeldscherm weer te geven.
2. Selecteer met
U
/
u
de optie [Audio].
3. Selecteer met
I
/
i
de gewenste audiotaal
en het audionummer of audiokanaal.
LET OP
Bij sommige disks kunt u de verschillende
mogelijkheden voor geluidsweergave alleen
via het diskmenu kiezen. Druk in dat geval
op de knoppen POPUP/ TOP MENU of MENU
en kies de gewenste geluidsweergave uit de
keuzemogelijkheden in het diskmenu.
Het is mogelijk dat het beeld en geluid korte
tijd niet gelijk lopen nadat u het geluid hebt
overgeschakeld.
De taal voor ondertitels
selecteren
BD
DVD
AVCHD
MOVIE
1. Druk tijdens het afspelen op DISPLAY
(
) om het OSD (On-Screen Display)
beeldscherm weer te geven.
2. Selecteer met
U
/
u
de optie [Ondertiteling].
3. Selecteer met
I
/
i
de gewenste
ondertiteltaal.
4. Druk op RETURN (
O
) om het OSD-
beeldschermmenu te sluiten.
LET OP
Sommige disks stellen u in staat om ondertiteling
selecties alleen via het diskmenu te wijzigen. Indien
dit het geval is drukt u op POPUP/ TOP MENU of
MENU knop en kiest u de juiste taal uit de keuzes
van het diskmenu.
HB985-DB.BDEUPPK_DUT.indd 46HB985-DB.BDEUPPK_DUT.indd 46 2010-05-14  2:58:082010-05-14  2:58:08
47
Bediening
4
Bediening
Kijken vanuit een andere hoek
BD
DVD
Als de disk beelden bevat die onder
verschillende camerahoeken opgenomen
zijn, kunt u overschakelen naar een andere
camerahoek tijdens afspelen.
1. Druk tijdens het afspelen op DISPLAY
(
) om het OSD (On-Screen Display)
beeldscherm weer te geven.
2. Selecteer met
U
/
u
de optie [Hoek].
3. Selecteer met
I
/
i
de gewenste
camerahoek.
4. Druk op RETURN (
O
) om het OSD-
beeldschermmenu te sluiten.
De hoogte-breedteverhouding
van het tv-beeld aanpassen
BD
DVD
AVCHD
MOVIE
Tijdens het afspelen kunt u de ingestelde
hoogte-breedteverhouding van het tv-beeld
aanpassen.
1. Druk tijdens het afspelen op DISPLAY
(
) om het OSD (On-Screen Display)
beeldscherm weer te geven.
2. Selecteer met
U
/
u
de optie
[Beeldverhouding].
3. Selecteer met
I
/
i
de gewenste optie.
4. Druk op RETURN (
O
) om het OSD-
beeldschermmenu te sluiten.
LET OP
Ook als u in het OSD-beeldschermmenu de waarde
van de optie [Beeldverhouding] wijzigt, wordt de
optie [Beeldverhouding] in het [Instellen]-menu
niet gewijzigd.
Beeldmodus wijzigen
BD
DVD
AVCHD
MOVIE
Tijdens het afspelen kunt u de optie
[Beeldmodus] wijzigen.
1. Druk tijdens het afspelen op DISPLAY
(
) om het OSD (On-Screen Display)
beeldscherm weer te geven.
2. Selecteer met
U
/
u
de optie [Beeldmodus].
3. Selecteer met
I
/
i
de gewenste optie.
4. Druk op RETURN (
O
) om het OSD-
beeldschermmenu te sluiten.
[Gebr. Inst.] optie instellen
1. Druk tijdens het afspelen op DISPLAY
(
) om het OSD (On-Screen Display)
beeldscherm weer te geven.
2. Selec
teer met
U
/
u
de optie [Beeldmodus].
3. Selecteer met
I
/
i
de optie [Gebr. Inst.] en
druk op ENTER (
).
4. Gebruik
U
/
u
/
I
/
i
om de opties van
[Beeldmodus] aan te passen.
Selecteer de optie [Standaard] en druk
vervolgens op ENTER ( ) om alle video-
instellingen naar de fabrieksinstelling terug
te zetten.
5. Selecteer met
U
/
u
/
I
/
i
de optie [Sluit]
en druk op ENTER (
) om de instelling te
voltooien.
HB985-DB.BDEUPPK_DUT.indd 47HB985-DB.BDEUPPK_DUT.indd 47 2010-05-14  2:58:092010-05-14  2:58:09
48
Bediening
Bediening
4
De ongekende
mogelijkheden van
BD-Live
Met deze speler kunt u genieten van functies
zoals beeld-in-beeld, secundaire audio en
virtuele pakketten, etc. met BD-Video met
BONUSVIEW (BD-ROM versie 2 Pro el 1 versie
1.1 / De nitieve standaard pro el).
U kunt secundaire video en audio afspelen van
disks die geschikt zijn voor de beeld-in-beeld
functie. Zie voor de weergavemethode de
aanwijzingen op de disk.
Naast de BONUSVIEW functie, heeft BD-
Video, dat BD-Live (BD-ROM version 2 Pro le
2) ondersteunt, een netwerkextensiefunctie
waarmee u door dit apparaat aan te sluiten
op het internet gebruik kunt maken van meer
functies zoals het downloaden van nieuwe
lmtrailers.
1. De aansluitingen en de instellingen van het
netwerk controleren (pagina 28-30).
2. Bevestig een usb-geheugen aan de usb-
poor
t op het frontpaneel.
Een usb-geheugen is nodig voor het
downloaden van extra bonuscontent.
Usb-aansluiting
3 . Druk op HOME MENU, en stel de optie
[BD-LIVE aansluiting] in het [Instellen]-menu
in (pagina 37).
Afhankelijk van de disk is de BD-LIVE functie
niet altijd beschikbaar indien de [BD-
LIVE aansluiting] optie ingesteld is [Deels
toegestaan].
4 . Plaats een BD-ROM-disk met BD-Live
functionaliteit in de disklade.
De mogelijkheden zijn afhankelijk van het
type disk. Zie de handleiding die met de
disk is meegeleverd.
LET OP
Ontkoppel het aangesloten USB-apparaat
niet tijdens het downloaden van beeld- en/
of audiomateriaal of wanneer er nog een Blu-
ray-disk in de disklade zit. Als u dit advies niet
opvolgt, kan het aangesloten USB-apparaat
beschadigd worden en werken de BD-LIVE-
functies niet meer met het beschadigde USB-
apparaat samen. Als het aangesloten USB-
apparaat door een dergelijke actie beschadigd
lijkt, kunt u het aangesloten USB-apparaat
vanaf de PC formatteren en dit met deze speler
opnieuw gebruiken.
Sommige BD-LIVE inhoud kan, zoals bepaald
door de provider van de inhoud, in sommige
gebieden maar beperkt toegankelijk zijn.
Het laden en starten van BD-LIVE inhoud kan
enkele minuten duren.
HB985-DB.BDEUPPK_DUT.indd 48HB985-DB.BDEUPPK_DUT.indd 48 2010-05-14  2:58:092010-05-14  2:58:09
49
Bediening
4
Bediening
Film- en VR-disks
afspelen
U kunt dvd-rw-disks afspelen die in Video
Recording (VR)-formaat zijn opgenomen en
lmbestanden die op een disk of usb-apparaat
zijn opgeslagen.
1. Druk op
HOME MENU.
2. Selecteer met
U
/
u
/
I
/
i
de optie [Film] en
druk op ENTER ( ).
3. Selecteer het apparaat met behulp van
I
/
i
en druk op ENTER ( ).
Wanneer u een of twee apparaten aansluit,
ontstaat de bovenstaande situatie.
4. Selecteer een bestand met
U
/
u
/
I
/
i
en
druk op
B
PLAY of ENTER ( ) om het
bestand af te spelen.
LET OP
De vereisten waaraan de bestanden moeten
voldoen vindt u op pagina 11.
U kunt verscheidene afspeelfuncties gebruiken.
Zie pagina 40-47.
Niet ge naliseerde DVD-VR disks worden.
Sommige dvd-vr-disks zijn opgenomen met
CPRM (Copy Protection for Recordable Media)
kopieerbeveiliging. Dit toestel ondersteunt dit
soort disks niet.
Wat is CPRM?
CPRM is een beveiligingsysteem tegen
kopiëren (met coderingsysteem) dat alleen het
opnemen van één maal kopiëren” programmas
toestaat. CPRM betekent Content Protection for
Recordable Media (Inhoudsbescherming voor
opneembare media).
HB985-DB.BDEUPPK_DUT.indd 49HB985-DB.BDEUPPK_DUT.indd 49 2010-05-14  2:58:092010-05-14  2:58:09
50
Bediening
Bediening
4
Een bestand met ondertitels
selecteren
MOVIE
Als de naam van een  lmbestand en het
betre ende ondertitelbestand gelijk zijn, wordt
het ondertitelbestand automatisch tegelijk
met het  lmbestand afgespeeld.
Als de naam van het ondertitelbestand niet
gelijk is aan die van het  lmbestand, moet
u het ondertitelbestand voordat u de  lm
afspeelt selecteren in het [Film]-menu.
1. Selecteer met
U
/
u
/
I
/
i
in het [Film]-menu
het ondertitelbestand dat u wilt afspelen.
2. Druk op ENTER (
).
Druk nogmaals op ENTER ( ) om de
selectie van het ondertitelbestand
ongedaan te maken. Wanneer u het
lmbestand afspeelt wordt ook het
ondertitelbestand weergegeven.
LET OP
ls u tijdens het afspelen op
x
(STOP) drukt,
wordt de selectie van de ondertitel geannuleerd.
Het is mogelijk dat deze functie in de
[Homelink]-functie niet werkt.
De ondertitel-codepagina
wijzigen
MOVIE
Als de ondertiteling van een  lm niet goed
loopt, kunt u de ondertitelcodepagina wijzigen
om het ondertitelbestand correct weer te
geven.
1. Druk tijdens het afspelen op DISPLAY
(
) om het OSD (On-Screen Display)
beeldscherm weer te geven.
2. Selecteer met
U
/
u
de optie
[Codepaginamenu].
3. Selecteer met
I
/
i
de gewenste codeoptie.
4. Druk op RETURN (
O
) om het OSD-
beeldschermmenu te sluiten.
HB985-DB.BDEUPPK_DUT.indd 50HB985-DB.BDEUPPK_DUT.indd 50 2010-05-14  2:58:092010-05-14  2:58:09
51
Bediening
4
Bediening
Fotos bekijken
U kunt met deze speler ook fotobestanden
weergeven.
1. Druk op
HOME MENU.
2. Selecteer met
I
/
i
de optie [Foto] en druk
op ENTER ( ).
3. Selecteer het apparaat met behulp van
I
/
i
en druk op ENTER ( ).
Wanneer u een of twee apparaten aansluit,
ontstaat de bovenstaande situatie.
4. Selecteer met
U
/
u
/
I
/
i
een bestand en
druk op ENTER (
) om de foto weer te
geven.
Een diavoorstelling (slideshow)
afspelen
Druk op
B
PLAY om de diapresentatie te
starten.
Een diapresentatie stoppen
Druk op
x
STOP terwijl de diapresentatie
loopt.
Een diapresentatie pauzeren
Druk op
X
PAUSE/STEP terwijl de
diapresentatie loopt.
Druk op
B
PLAY om de diapresentatie opnieuw
te starten.
Naar de vorige of volgende foto
overspringen
Wanneer u fotos schermvullend weergeeft,
kunt u door op
I
of
i
te drukken naar de
vorige of volgende foto springen.
LET OP
De vereisten waaraan de bestanden moeten
voldoen vindt u op pagina 11.
U kunt verscheidene afspeelfuncties gebruiken.
Zie pagina 40-47.
HB985-DB.BDEUPPK_DUT.indd 51HB985-DB.BDEUPPK_DUT.indd 51 2010-05-14  2:58:102010-05-14  2:58:10
52
Bediening
Bediening
4
Opties tijdens het weergeven
van fotos
Tijdens het schermvullend weergeven
van fotos hebt u verschillende
keuzemogelijkheden.
1. Druk tijdens het schermvullend weergeven
van fotos op DISPLAY (
) om het
optiemenu op te roepen.
2. Selecteer een optie met
U
/
u
.
a
g
f
e
d
c
b
h
a
Huidige foto / totaal aantal foto’s
Gebruik
I
/
i
om de vorige of de volgende
foto weer te geven.
b
Diavoor. – Druk op ENTER (
) om de
diapresentatie te starten of te pauzeren.
c
Kies Muziek – De achtergrondmuziek
voor uw diapresentatie selecteren
d
Muziek – Druk op ENTER ( ) om
achtergrondmuziek te starten of te pauzeren.
e
Roteren – Druk op ENTER (
) om de foto
rechtsom te draaien.
f
Zoomen – Druk op ENTER (
) om het
[Zoomen]-menu op te roepen.
g
E ect – Selecteer met
I
/
i
een
overgangse ect tussen de fotos in een
diapresentatie.
h
Snelheid – Selecteer met
I
/
i
de
tijdvertraging tussen fotos in een
diapresentatie.
3. Druk op RETURN (
O
) om het optiemenu
te verlaten.
Muziek luisteren tijdens een
diapresentatie
Tijdens het luisteren naar uw muziekbestanden
kunt u ook fotobestanden weergeven.
1. Druk op
HOME MENU.
2. Select met
U
/
u
/
I
/
i
, de optie [Foto] of
[Homelink] en druk op ENTER ( ).
3. Selecteer met
I
/
i
, de optie [Disk] of [USB]
en druk op ENTER ( ).
Om gebruik te kunnen maken van het
[Homelink]-menu moet u een server
selecteren of een map delen.
4. Selecteer met
U
/
u
/
I
/
i
, een bestand en
druk op ENTER (
) om een foto weer te
geven.
5. Druk op DISPLAY (
) om het optiemenu
weer te geven.
6. Selecteer met
U
/
u
de optie [K
ies Muziek]
en druk op ENTER ( ) om het [Kies Muziek]
-menu weer te geven.
HB985-DB.BDEUPPK_DUT.indd 52HB985-DB.BDEUPPK_DUT.indd 52 2010-05-14  2:58:102010-05-14  2:58:10
53
Bediening
4
Bediening
7. Selecteer met
U
/
u
een apparaat en druk op
ENTER ( ).
De apparaten die u kunt selecteren zijn
verschillend afhankelijk van de locatie van
het fotobestand dat u beeldschermvullend
weergeeft.
Fotolocatie Beschikbaar
apparaat
Disk Disk, USB
USB Disk, USB
Mappen op uw
pc (CIFS) delen
CIFS
DLNA-server DLNA-server
8. Selecteer met
U
/
u
een bestand of een map
om af t
e spelen.
Selecteer een map en druk op ENTER ( )
om de onderste directory weer te geven.
Selecteer
en druk o ENTER ( ) om de
bovenste directory weer te geven.
LET OP
U kunt geen muziek in de map [Homelink]
selecteren. In [Homelink] kunt u alleen bestanden
selecteren.
9. Selecteer met
i
de optie [OK] en druk
op ENTER ( ) om de muziekselectie te
voltooien.
Naar muziek luisteren
De speler is geschikt voor het afspelen van
audio-cd’s en muziekbestanden.
1. Druk op
HOME MENU.
2. Selecteer met
U
/
u
/
I
/
i
de optie [Muziek]
en druk op ENTER ( ).
3. Selecteer het apparaat met behulp van
I
/
i
en druk op ENTER ( ).
Wanneer u een of twee apparaten aansluit,
ontstaat de bovenstaande situatie.
4. Selecteer met
U
/
u
/
I
/
i
een muziekbestand
of –nummer en druk op ENTER (
) om de
muziek af te spelen.
LET OP
De vereisten waaraan de bestanden moeten
voldoen vindt u op pagina 11.
U kunt verscheidene afspeelfuncties gebruiken.
Zie pagina 40-47.
HB985-DB.BDEUPPK_DUT.indd 53HB985-DB.BDEUPPK_DUT.indd 53 2010-05-14  2:58:102010-05-14  2:58:10
54
Bediening
Bediening
4
Audio-cd’s opnemen
U kunt een bepaald nummer of alle nummers
van een audio-cd naar een usb-opslagapparaat
(geheugenstick) overzetten.
1. Bevestig een usb-geheugenstick in de usb-
poor
t op het frontpaneel.
2. Druk op
Z
(OPEN/CL
OSE) en leg een audio-
cd in de disklade.
Druk op
Z
(OPEN/CLOSE) om de disklade
te sluiten. Het afspelen start automatisch.
3. Druk op DISPLAY (
) om het optiemenu
weer te geven.
Of
Druk op de afstandsbediening op de USB
REC-knop
z
. U kunt alle muzieknummers
op de audio-cd opnemen.
4. Selecteer met
U
/
u
de optie [Cd opnem]
en druk op ENTER (
) om het [Cd opnem]-
menu weer te geven.
Herhaal deze stap om zoveel mogelijk
nummers te selecteren.
5. Selecteer met
U
/
u
een nummer dat u wilt
kopiëren en druk op ENTER (
).
Herhaal deze stap om zoveel mogelijk
nummers te selecteren.
Selecteer alle nummers op een
audio-cd.
Selecteer in het pop-upmenu
een coderingsoptie (128, 192 of
320 kbps of Lossless)
Annuleert de opname en gaat
terug naar het vorige scherm.
6. Selecteer met
U
/
u
/
I
/
i
de optie [Start] en
druk op ENTER (
).
7. Selecteer met
U
/
u
/
I
/
i
de
bestemmingsmap die moet worden
gekopieerd.
Als u een nieuwe map wilt maken, gebruik
dan
U
/
u
/
I
/
i
om [Nieuwe map] te
selecteren en druk op ENTER ( ).
Voer met het virtuele toetsenbord een
mapnaam in en druk op ENTER ( ) terwijl
[OK] is geselecteerd.
8. Selecteer met
U
/
u
/
I
/
i
de optie [OK] en
druk op ENTER (
) om met het opnemen
van audio-cd’s te beginnen.
Als u tijdens het opnemen van een audio-
cd wilt stoppen, drukt u op ENTER (
)
nadat u eerst [Annuleren] hebt gemarkeerd.
9. Er verschijnt een bericht wanneer het
opnemen van de audio
-cd is voltooid. Druk
op ENTER ( ) om het muziekbestand te
controleren dat u in de bestemmingsmap
hebt gemaakt.
HB985-DB.BDEUPPK_DUT.indd 54HB985-DB.BDEUPPK_DUT.indd 54 2010-05-14  2:58:112010-05-14  2:58:11
55
Bediening
4
Bediening
LET OP
De onderstaande tabel bevat een overzicht van
de gemiddelde opnametijden met bijvoorbeeld
een snelheid van 192 Kbps vanaf een nummer
met een afspeeltijd van 4 minuten naar een
muziekbestand.
Stopmodus Tijdens afspelen
1,4 min. 2 min.
Alle tijden in de bovenstaande tabel zijn
gemiddelden.
De werkelijke riptijd voor een usb-geheugenstick
is afhankelijk van de mogelijkheden van de usb-
geheugenstick.
Zorg ervoor dat u minimaal 50 MB vrije
geheugenruimte nodig hebt wanneer u op een
usb-geheugenstick opneemt.
Voor de feitelijke opname moet de muziek
minimaal 20 seconden lang zijn.
Schakel de speler niet uit en trek de usb-
geheugenstick niet uit de speler tijdens het
opnemen van een audio-cd.
Het zonder toestemming van de eigenaars
van het auteursrecht maken van kopieën van
auteursrechtelijk beschermd materiaal, waaronder
begrepen computerprogramma’s, bestanden,
tv- en radio-uitzendingen en geluidsopnamen,
kan worden aangemerkt als een inbreuk op het
auteursrecht en strafrechtelijk worden vervolgd.
Het is verboden deze apparatuur voor de
bovengenoemde doeleinden te gebruiken.
Neem uw verantwoordelijkheid
Respecteer auteursrechten
HB985-DB.BDEUPPK_DUT.indd 55HB985-DB.BDEUPPK_DUT.indd 55 2010-05-14  2:58:112010-05-14  2:58:11
56
Bediening
Bediening
4
iPod afspelen
U kunt een iPod op dit systeem afspelen. Zie
voor meer informatie de handleiding van de
iPod.
Voorbereiding
Houd rekening met het volgende als u
op een iPod opgeslagen videos en fotos
op het beeldscherm van een tv wilt
weergeven.
- Gebruik een videoaansluiting via het
VIDEO OUT-aansluitpunt aan de achterzijde
van dit apparaat. Selecteer de geschikte
video-ingangsmodus op de tv.
- Zorg er afhankelijk van de iPod voor dat u
Videos > Video-instellingen is geselecteerd
en stel vervolgens de tv-uitgang in op Ask
of “On” van uw iPod.
Zie de iPod handleiding voor meer
informatie over video-instellingen.
- De weergave van fotos is alleen
beschikbaar als u dit apparaat overschakelt
naar de “IN”-modus van de iPod en u kunt
fotos alleen als diapresentatie weergeven.
Om fotos op een tv weer te geven, moet
u een diapresentatie op uw iPod starten.
Zie de handleiding van de iPod voor meer
informatie over diapresentaties.
Schakel dit apparaat uit en zet het geluid
zo zacht mogelijk voordat u een iPod op dit
apparaat aansluit.
1. Sluit de iPod stevig aan.
Een iPod aansluiten
Sluit de houder aan en
plaats uw iPod erin.
2. Selecteer een bestand met
U
/
u
/
I
/
i
en
druk op ENTER om het bestand af te spelen.
iPod op het scherm weergeven
1. Sluit de iPod stevig aan.
2. Druk op HOME MENU (
).
3. Select met
I
/
i
de optie [Muziek] of [Film]
en druk op ENTER ( ).
Nadat u het andere apparaat hebt
aangesloten, selecteert u de iPod in het
menu.
4. Selecteer met
U
/
u
/
I
/
i
, het opgenomen
materiaal en druk op ENTER (
).
HB985-DB.BDEUPPK_DUT.indd 56HB985-DB.BDEUPPK_DUT.indd 56 2010-05-14  2:58:112010-05-14  2:58:11
57
Bediening
4
Bediening
Naar een iPod luisteren in de
iPod IN-modus
U kunt uw iPod bedienen met behulp van
de meegeleverde afstandsbediening en de
bedieningsknoppen op uw iPod.
1. Sluit de iPod stevig aan.
Als u dit apparaat inschakelt, wordt uw
iPod automatisch ingeschakeld en start het
opladen.
2. Druk op INPUT/TUNER om de iPod IN-
modus te selecteren.
U
/
u
/
I
/
i
Een optie in het menu
selecteren.
B
/ENTER
Start het afspelen van de
muziek of video.
X
Hiermee kunt u het afspelen
pauzeren. Druk nog een keer
op
B
(PLAY) om het afspelen
te hervatten.
m
/
M
Een muzieknummer of video
snel vooruit “spoelen.
.
/
>
Het afspelen vooruit of
achteruit overslaan.
REPEAT Een geselecteerde
herhaalmodus selecteren:
Nummer
( )
, Alles
( )
, Uit
(Geen weergave).
LET OP
Dit systeem is compatibel met de audio en video
van de iPod (4
e
generatie), iPod nano, iPod classic,
iPod mini, iPod touch en iPhone.
(iPod shu e wordt niet ondersteund).
LET OP
Het foutbericht “CHECK IPOD (iPod controleren)
of “Connected iPod model is not supported”
(Aangesloten model iPod wordt niet
ondersteund) verschijnt wanneer:
- Uw iPod niet geschikt is voor de functie die u
wilt bedienen.
Het foutbericht “CHECK IPOD (iPod controleren)
of “Please update iPod’s software” (Software van
iPod bijwerken) verschijnt als:
- Uw iPod met een verouderde softwareversie
werkt.
t
Update uw iPod naar de nieuwste versie.
Als dit apparaat een foutbericht toont, volg het
bericht dan op. Het foutbericht “CHECK IPOD”
(iPod controleren) of “Please check your iPod”
(Controleer uw iPod) verschijnt als:
- De verbinding tussen dit apparaat en uw iPod
is verbroken.
t
Ontkoppel uw iPod van dit apparaat en
plaats hem vervolgens in het dock terug.
- Uw iPod is niet goed aangesloten.
- Dit apparaat ziet uw iPod als onbekend
apparaat.
- De accu van uw iPod is vrijwel uitgeput.
t
De accu moet opnieuw worden geladen.
t
Als de accu van uw iPod bijna leeg is, kan het
wat meer tijd kosten om uw iPod weer te laden.
Het best kunt u de meegeleverde dock-adapter
in het dock gebruiken om uw iPod goed aan te
sluiten. Vraag advies van uw iPod leverancier als
u een adapter nodig hebt.
De compatibiliteit met uw iPod is afhankelijk van
het type iPod dat u gebruikt.
De bediening van een iPod touch en iPhone
verschilt van de bediening van een “normale”
iPod. Het is mogelijk dat u een aanvullende
bedieningsmogelijkheid nodig hebt om ze met
dit apparaat te gebruiken. (bijv. “slide to unlock
ofwel openschuiven om te ontgrendelen”)
Als u een toepassing gebruikt, bel dan op of
stuur en ontvang een SMS’-tekstbericht e.d.
over uw iPod touch of iPhone, neem hem uit
de iPod dock van dit apparaat en gebruik hem
vervolgens opnieuw.
Afhankelijk van de softwareversie van uw iPod is
het mogelijk dat u de iPod niet met dit apparaat
kunt gebruiken. Wij adviseren de nieuwste
softwareversie te installeren.
De videokwaliteit is afhankelijk van het
videobronmateriaal op uw iPod
Als u problemen met uw iPod hebt, ga dan naar
www.apple.com/support/ipod.
HB985-DB.BDEUPPK_DUT.indd 57HB985-DB.BDEUPPK_DUT.indd 57 2010-05-14  2:58:122010-05-14  2:58:12
58
Bediening
Bediening
4
Radio
Zorg ervoor dat de antenne is aangesloten.
(Zie pagina 24)
Naar de radio luisteren
1. Druk op INPUT/TUNER tot TUNER (FM)
op het weergavescherm verschijnt. De
radiotuner stemt nu af op het radiostation
waarop u het laatst hebt afgestemd.
2. Druk ongeveer twee seconden op TUNE
(-/+) tot de frequentie-indicatie verandert.
Het scannen stopt wanneer het apparaat
op een station afstemt. Of Druk een paar
keer op TUNE (-/+).
3. U regelt het geluidsvolume door aan
de VOLUME-knop op het frontpaneel te
draaien of door op de afstandsbediening
op VOL (+/-) te drukken.
Voorkeurstations vastleggen
U kunt de afstemming op 50 fm-radiostations
vooraf programmeren. Zet voordat u met
afstemmen begint het volume zo laag mogelijk.
1. Druk op INPUT/TUNER tot TUNER (FM) op
het weergavescherm verschijnt.
2. Selecteer met TUNE (-/+) de frequentie van
een radiostation dat u als voorkeurstation
wilt vastleggen.
3. Druk vervolgens op ENTER (
) en de
afgestemde frequentie gaat op het
weergavescherm knipperen.
4. Druk op PRESET om de gewenste
voorkeurfrequenties te selecteren.
5. Druk op ENTER (
). De door u gekozen
frequentie wordt nu als voorkeurstation
opgeslagen.
6. Herhaal stap 2 t/m 5 om meer stations op
te slaan.
Alle opgeslagen stations wissen
Druk twee seconden op CLEAR (Wissen).
De tekst “ERASE ALL (Verwijder alles) gaat
knipperen. Vervolgens worden alle opgeslagen
stations gewist.
Slechte fm-ontvangst
verbeteren
Druk op de afstandsbediening op de blauwe
(MONO/STEREO) knop D. Hierdoor schakelt de
tuner over van stereo naar mono waardoor de
ontvangst doorgaans beter wordt.
Informatie over radiostations
De fm-tuner is geschikt voor de ontvangst van
Radio Data System (RDS)-informatie. Hierdoor
krijgt u informatie te zien over het radiostation
dat u beluistert. Door herhaald op RDS te
drukken, kunt u de verschillende soorten
informatie bekijken.
PS (Programme Service Name)
Met deze functie kunt u de naam
van de afgestemde radiostations
ofwel programmas op het
weergavescherm bekijken.
PTY (Programme Type Recognition)
Het programmatype (bijv. Jazz of
Nieuws) verschijnt op het display.
RT (Radio Text)
Er verschijnt een bericht met
speciale informatie over het
uitgezonden station. Deze tekst
kan over het display lopen.
CT (Time controlled by the channel)
Dit toont de tijd en de datum
die door het station worden
uitgezonden.
HB985-DB.BDEUPPK_DUT.indd 58HB985-DB.BDEUPPK_DUT.indd 58 2010-05-14  2:58:122010-05-14  2:58:12
59
Bediening
4
Bediening
Inhoud via uw
thuisnetwerk afspelen
De speler kan materiaal opzoeken en
afspelen dat in uw pc en op uw thuisnetwerk
aangesloten DLNA-gecerti ceerde
mediaservers is opgeslagen.
Wat betekent DLNA?
Deze speler is een voor DNLA gecerti ceerde
digitale mediaspeler die  lm-, foto- en
muziekmateriaal afkomstig van een met DNLA
compatibele digitale mediaserver (pc en
consumentenelektronica) kan weergeven en
afspelen.
De Digital Living Network Alliance (DLNA)
is een breedgeoriënteerde organisatie van
bedrijven die actief zijn op het gebied van
consumentenelektronica, computers en
mobiele digitale apparaten. Door middel van
de functie Digital Living kunt u eenvoudig
digitale media via een thuisnetwerk delen.
Producten die aan de richtlijnen voor
onderlinge samenwerking van de
DLNA voldoen, zijn gemakkelijk aan
het certi ceringslogo van de DLNA te
herkennen. Dit apparaat voldoet aan de DLNA
Interoperability Guidelines (Richtlijnen voor
onderlinge samenwerking) versienummer 1.5.
Wanneer een pc die DLNA software uitvoert,
of die op een ander met DLNA compatibel
apparaat is aangesloten, met deze speler
wordt verbonden, kan het nodig zijn bepaalde
instellingen voor software of andere apparaten
aan te passen. Zie voor meer informatie
de handleiding van de software of van het
betre ende apparaat.
Een DLNA-mediaserver openen
1. De aansluitingen en de instellingen van het
netwerk controleren (pagina 28-30).
2. Druk op
HOME MENU.
3. Selecteer met
U
/
u
/
I
/
i
, de optie
[Homelink] en druk op ENTER (
).
4. Selecteer met
U
/
u
een van de DLNA-
mediaservers in het overzicht en druk op
ENTER ( ).
Druk op de groene knop (B) als u de
beschikbare mediaserver opnieuw wilt
scannen.
LET OP
Afhankelijk van de mediaserver is het mogelijk
dat deze speler toestemming van de server moet
krijgen.
5. Selecteer een bestand met
U
/
u
/
I
/
i
en
druk op ENTER ( ) om het bestand af te
spelen.
HB985-DB.BDEUPPK_DUT.indd 59HB985-DB.BDEUPPK_DUT.indd 59 2010-05-14  2:58:122010-05-14  2:58:12
60
Bediening
Bediening
4
LET OP
De vereisten waaraan de bestanden moeten
voldoen vindt u op pagina 11.
U kunt verscheidene afspeelfuncties gebruiken.
Zie pagina 40-47.
De bestandsvereisten op pagina 11 zijn niet altijd
compatibel
. Er kunnen bepaalde beperkingen
gelden voor bestandseigenschappen en de
mogelijkheden van de mediaserver.
In het [Homelink]-menu kunt u de miniaturen
van onspeelbar
e bestanden weergeven maar
u kunt deze bestanden niet op deze speler
afspelen.
Als het [Homelink]-menu een onspeelbaar
muziek
bestand bevat, slaat de speler dit bestand
over en speelt daarna het eerstvolgende
afspeelbare bestand.
De namen van het ondertitelbestand en het
lmbestand moeten dezelfde zijn en deze
bestanden moeten zich in dezelfde map
bevinden.
De afspeelkwaliteit en de
bedieningsmogelijkheden van de [Homelink]-
functie zijn afhankelijk van de conditie van uw
thuisnetwerk.
Soms kunnen bestanden van mobiele media
zoals usb- en dvd-stations en dergelijke op uw
mediaserver niet worden gedeeld.
Gedeelde mappen vanaf uw pc
openen
1. Start de pc die op uw LAN (plaatselijke
netwerk) is aangesloten.
2. Op uw pc kunt u mappen met  lms, foto’s
en muziek delen.
3. C
ontroleer op de speler de
netwerkverbinding en netwerkinstellingen
(pagina 28-30).
4. Druk op HOME MENU.
5. Selecteer met
U
/
u
/
I
/
i
, de optie
[Homelink] en druk op ENTER (
).
6. Selecteer met
U
/
u
in de lijst een map om te
delen en druk op ENTER (
).
Druk op de groene knop (B) als u de
beschikbare mediaservers opnieuw wilt
scannen.
LET OP
Afhankelijk van de te delen map is het mogelijk
dat u met deze speler de gebruikersnaam van de
netwerkgebruiker en het wachtwoord voor het
openen van de map moet invoeren.
7. Selecteer een bestand met
U
/
u
/
I
/
i
en
druk op ENTER ( ) om het bestand af te
spelen.
HB985-DB.BDEUPPK_DUT.indd 60HB985-DB.BDEUPPK_DUT.indd 60 2010-05-14  2:58:122010-05-14  2:58:12
61
Bediening
4
Bediening
LET OP
De vereisten waaraan de bestanden moeten
voldoen vindt u op pagina 11.
U kunt verscheidene afspeelfuncties gebruiken.
Zie pagina 40-47.
In het [Homelink]-menu kunt u de miniaturen
van onspeelbare bestanden weergeven maar
u kunt deze bestanden niet op deze speler
afspelen.
Als het [Homelink]-menu een onspeelbaar
muziekbestand bevat, slaat de speler dit bestand
over en speelt daarna het eerstvolgende
afspeelbare bestand.
De namen van het ondertitelbestand en het
lmbestand moeten dezelfde zijn en deze
bestanden moeten zich in dezelfde map
bevinden.
De afspeelkwaliteit en de
bedieningsmogelijkheden van de [Homelink]-
functie zijn afhankelijk van de conditie van uw
thuisnetwerk.
Het is mogelijk dat u bestanden op verwisselbare
media zoals usb-stations, dvd-stations e.d. op
uw pc niet probleemloos kunt delen.
Afhankelijk van uw pc-omgeving is het mogelijk
dat u problemen met verbindingen tegenkomt.
PC eisen
Windows® XP (Service Pack 2 of hoger),
Windows Vista® (geen Service Pack nodig)
Windows 7®
1.2 GHz Intel® Pentium® III of AMD
Sempron™ 2200+ processors
Netwerkomgeving: 100 MB Ethernet, WLAN
(IEEE 802.11b/g/n)
LET OP
Als u Windows® XP of Windows Vista® gebruikt, ga
dan naar de hieronder vermelde link voor meer
informatie over instellingen voor het delen van
bestanden.
HB985-DB.BDEUPPK_DUT.indd 61HB985-DB.BDEUPPK_DUT.indd 61 2010-05-14  2:58:122010-05-14  2:58:12
62
Bediening
Bediening
4
Uw netwerkgebruikersnaam en
wachtwoord invoeren
Afhankelijk van uw pc-omgeving kan het nodig
zijn dat u de naam van de netwerkgebruiker
en een wachtwoord moet invoeren om een
gedeelde map te openen.
1. Het toetsenbordmenu
verschijnt automatisch als een
netwerkgebruikersnaam en een
wachtwoord vereist zijn.
2. Gebruik
U
/
u
/
I
/
i
om een teken te
selecteren en druk vervolgens op ENTER
(
) om uw keuze in het toetsenbordmenu
te bevestigen.
Letters met een accentteken (á, à, é, è, â,
ê, ã enzovoort) kunt u in de uitgebreide
tekenset (extended character set) vinden en
van daaruit invoeren.
Voorbeeld: Selecteer “D” en druk op DISPLAY
(
) om de uitgebreide tekenset te tonen.
Selecteer “D or “Ď met behulp van
I
/
i
en
druk op ENTER(
).
[Wis] – Alle ingevoerde tekens wissen.
[Spatie] – Voert een spatie op de cursorpositie
in.
[<–] – Verwijder het vorige teken bij de
cursorpositie.
[ABC / abc / #+-=&] – Verandert de instelling
van het toetsenbordmenu in hoofdletter,
kleine letter of symbolen.
3. Wanneer u klaar bent met het invoeren
van uw netwerkgebruikersnaam en
wachtwoord selecteert u met
U
/
u
/
I
/
i
de
optie [OK] en drukt u op ENTER (
) om de
map te openen.
Om het u gemakkelijk te maken,
worden uw netwerkgebruikersnaam en
wachtwoord in een geheugen opgeslagen
nadat u de map hebt geopend. Als u niet
wilt dat de netwerkgebruikersnaam en het
wachtwoord worden opgeslagen, drukt
u voordat u de map opent op de rode (A)
knop om het kruisje uit het selectievakje
[Onthoud] te verwijderen.
HB985-DB.BDEUPPK_DUT.indd 62HB985-DB.BDEUPPK_DUT.indd 62 2010-05-14  2:58:122010-05-14  2:58:12
63
Onderhoud
5
Onderhoud
Wat u over disks moet
weten
Disks hanteren
Plak nooit papier of plakband op een disk.
Disks bewaren
Doe de disk na het afspelen terug in de
bijbehorende cassette. Stel disks niet bloot
aan direct zonlicht of warmtebronnen (bijv. de
verwarming) en laat disks nooit in uw auto in
de zon liggen.
Disks reinigen
Gebruik geen krachtige oplosmiddelen
zoals alcohol, benzeen, thinner, in de
handel verkrijgbare reinigingsmiddelen
of antistatische sprays die voor oudere
vinylgrammofoonplaten bedoeld zijn.
Behandeling van het
apparaat
Het apparaat vervoeren
Bewaar de originele doos en het
verpakkingsmateriaal waarin u het apparaat
hebt gekocht. Als u het apparaat veilig wilt
versturen, verpak het dan op dezelfde manier
waarop het in de fabriek is verpakt.
De buitenkant van het apparaat schoon
houden;
Gebruik in de buurt van het apparaat geen
vluchtige vloeisto en door bijvoorbeeld
insecticide te verstuiven.
Door het apparaat met kracht af te wrijven
kunt u het beschadigen.
Laat geen rubber of kunststof voorwerpen
langdurig in contact met het apparaat.
Apparaat reinigen
Gebruik een zachte droge doek om het
apparaat te reinigen. Als de buitenkant van
het apparaat erg vuil is, gebruik dan een zachte
doek die u met een sopje licht bevochtigt.
Gebruik geen krachtige oplosmiddelen zoals
alcohol, benzeen of thinner omdat deze het
oppervlak van het apparaat kunnen aantasten.
Apparaat onderhouden
Dit apparaat is een high-tech precisieapparaat.
Als de optische pick-uplens en de onderdelen
die de disks aandrijven vuil of versleten
zijn, kan de beeldkwaliteit achteruitgaan.
Neem voor meer informatie contact op met
uw LG leverancier of het dichtstbijzijnde
servicecentrum.
5
Onderhoud
HB985-DB.BDEUPPK_DUT.indd 63HB985-DB.BDEUPPK_DUT.indd 63 2010-05-14  2:58:132010-05-14  2:58:13
64
Problemen oplossen
Problemen oplossen
6
6
Problemen oplossen
Algemeen
De stroom wordt niet
ingeschakeld.
Steek de stroomkabel goed in het stopcontact.
Het apparaat start niet met
afspelen.
Leg een afspeelbare disk in de speler (en controleer of u
het juiste type disk met het juiste kleurensysteem en dito
regiocode gebruikt.)
Leg de disk met de afspeelkant naar beneden.
Leg de disk goed in de geleider in de disklade..
Maak de disk schoon.
Annuleer de beoordelingsfunctie of verander het
beoordelingsniveau.
De hoek kan niet worden
veranderd.
Op de dvd-video die u afspeelt zijn geen verschillende
camerastandpunten (multi-angles) opgenomen.
U kunt de taal van de
ondertitels niet veranderen
of uitschakelen.
Op de dvd-video die u afspeelt zijn geen ondertitels
opgenomen.
Kan geen mp3-, wma-,
jpeg- of DivX-bestanden
afspelen.
De bestanden zijn niet opgenomen in een formaat dat de
speler kan afspelen.
De speler ondersteunt de codec van het  lmbestand niet.
De afstandsbediening
werkt niet goed.
De afstandsbediening is niet op de afstandssensor van het
apparaat gericht.
U gebruikt de afstandsbediening te ver van het apparaat.
Er is een obstakel aanwezig tussen de afstandsbediening en
het apparaat.
De batterijen in de afstandsbediening zijn uitgeput.
HB985-DB.BDEUPPK_DUT.indd 64HB985-DB.BDEUPPK_DUT.indd 64 2010-05-14  2:58:132010-05-14  2:58:13
65
Problemen oplossen
6
Problemen oplossen
Beeld
Er is geen beeld. Selecteer het geschikte video-ingangssignaal op de tv
waardoor het beeld van het speler op het beeldscherm van
de tv verschijnt.
Zorg dat de videoverbinding stevig is aangesloten.
Controleer of de [HDMI Kleur instelling.] in het [Instellen]-
menu is ingesteld op de component die met uw
videoverbinding overeenstemt.
Het is mogelijk dat uw tv de door u op de speler ingestelde
resolutie niet ondersteunt. Verander deze in een resolutie die
uw tv kan verwerken.
De HDMI-uitgang van de speler is aangesloten op een dvi-
apparaat dat de kopieerbeveiligingsfunctie niet ondersteunt.
Er verschijnt beeldruis U speelt een disk af die opgenomen is met een
kleurensysteem dat verschilt van het kleurensysteem van uw
tv.
Stel een resolutie in die uw tv accepteert.
Geluid
Er is geen geluid of het
geluid is vervormd.
Het apparaat is op scannen, slow motion of pauzeren
ingesteld.
Het geluidsvolume is te zwak.
Controleer of de luidsprekerkabel goed is aangesloten.
(pagina 16)
HB985-DB.BDEUPPK_DUT.indd 65HB985-DB.BDEUPPK_DUT.indd 65 2010-05-14  2:58:132010-05-14  2:58:13
66
Problemen oplossen
Problemen oplossen
6
Netwerk
BD-LIVE functie werkt niet. De aangesloten usb-geheugenstick heeft niet genoeg
opslagruimte. Sluit een usb-geheugenstick aan met minstens
1 GB vrij beschikbare geheugenruimte.
Zorg dat het toestel correct aangesloten is op het LAN
netwerk en toegang heeft tot het internet (zie bladzijde 28).
Uw zendsnelheid is te traag voor het gebruik van BD-Live
functies. Wij adviseren u contact op te nemen met uw
leverancier van internetdiensten en deze om een hogere
breedbandsnelheid te vragen.
De optie [BD-LIVE aansluiting] in het [Instellen]-menu is
ingesteld op [Verboden]. Stel de optie in op [Toegestaan].
Ontwerp en speci caties kunnen zonder voorafgaande mededeling worden gewijzigd.
Updates
Informatie over dit product is beschikbaar op de website van Pioneer. Ga naar deze website
voor informatie over het bijwerken of servicen van uw Blu-ray diskspeler.
HB985-DB.BDEUPPK_DUT.indd 66HB985-DB.BDEUPPK_DUT.indd 66 2010-05-14  2:58:132010-05-14  2:58:13
67
Bijlage
7
Bijlage
Uw tv bedienen met
de meegeleverde
afstandsbediening
Met de hieronder afgebeelde toetsen kunt u
uw PIONEER televisie bedienen
TV
bedienings-
knoppen
Knop Bediening
1
(TV Power)
De tv in- en uitschakelen.
INPUT Schakelen tussen de
ingangsbronnen van de tv
en andere bronnen.
CH +/- Omhoog en omlaag
scannen door
geprogrammeerde kanalen.
VOL +/- Het geluidsvolume van de
tv aanpassen.
LET OP
Afhankelijk van het aangesloten toestel, is het
mogelijk dat u uw tv met bepaalde knoppen niet
kunt bedienen.
De afstandsbediening voor uw
tv geschikt maken
U kunt uw tv met de meegeleverde
afstandsbediening bedienen.
Als uw tv in de onderstaande lijst voorkomt,
kunt u de bijbehorende fabriekscode ingeven.
1. Terwijl u de
1
(TV POWER)-knop ingedrukt
houdt, voert u met de cijfertoetsen de
fabriekscode van uw tv in (zie onderstaande
tabel).
Merk Code
Pioneer 1(Standaard)
Sony 2, 3
Panasonic 4, 5
Samsung 6, 7
LG 8, 9
2. Laat de
1
(TV POWER) knop los om de
instelling te voltooien.
Afhankelijk van uw tv is het mogelijk dat
sommige of alle toetsen niet met uw tv
samenwerken, ook niet nadat u de juiste
fabriekscode hebt ingevoerd. Wanneer u
de batterijen van de afstandsbediening
vervangt, wordt de door u ingegeven code
naar de standaardinstelling teruggezet. Stel de
betre ende code opnieuw in.
7
Bijlage
HB985-DB.BDEUPPK_DUT.indd 67HB985-DB.BDEUPPK_DUT.indd 67 2010-05-14  2:58:132010-05-14  2:58:13
68
Bijlage
Bijlage
7
Regiocodelijst
Kies een regiocode uit de lijst.
Gebied Code Gebied Code Gebied Code Gebied Code
Afghanistan AF
Argentinië AR
Australië AU
Oostenrijk AT
België BE
Bhoetan BT
Bolivia BO
Brazilië BR
Cambodja KH
Canada CA
Chili CL
China CN
Colombia CO
Congo CG
Costa Rica CR
Kroatië HR
Tsjechië CZ
Denemarken DK
Ecuador EC
Egypte EG
El Salvador SV
Ethiopië ET
Fijis FJ
Finland FI
Frankrijk FR
Duitsland DE
Groot-Brittanië GB
Griekenland GR
Groenland GL
Hong-Kong HK
Hongarije HU
India IN
Indonesië ID
Israël IL
Italië IT
Jamaica JM
Japan JP
Kenia KE
Koeweit KW
Libië LY
Luxemburg LU
Maleisië MY
Maldiven MV
Mexico MX
Monaco MC
Mongolië MN
Marokko MA
Nepal NP
Nederland NL
Nederlandse
Antillen AN
Nieuw-Zeeland NZ
Nigeria NG
Noorwegen NO
Oman OM
Pakistan PK
Panama PA
Paraguay PY
Filipijnen PH
Polen PL
Portugal PT
Roemenië RO
Russische
Federatie RU
Saudi Arabië SA
Senegal SN
Singapore SG
Slowakije SK
Slovenië SI
Zuid-Afrika ZA
Zuid-Korea KR
Spanje ES
Sri Lanka LK
Zweden SE
Zwitserland CH
Taiwan TW
Thailand TH
Turkije TR
Oeganda UG
Oekraïne UA
Verenigde Staten US
Uruguay UY
Oezbekistan UZ
Vietnam VN
Zimbabwe ZW
HB985-DB.BDEUPPK_DUT.indd 68HB985-DB.BDEUPPK_DUT.indd 68 2010-05-14  2:58:132010-05-14  2:58:13
69
Bijlage
7
Bijlage
Taalcodelijst
Aan de hand van deze lijst kunt u de gewenste taal voor de volgende startinstellingen invoeren:
[Audio disk], [Disk ondertiteling] en [Disk Menu].
Taal Code Taal Code Taal Code Taal Code
Afaars 6565
Afrikaans 6570
Albanees 8381
Amharisch 6577
Arabisch 6582
Armeens 7289
Assamees 6583
Aymara 6588
Azerbeidzjaans 6590
Bashkir 6665
Basks 6985
Bengali; Bangladesh
6678
Bhutani 6890
Bihari 6672
Bretons 6682
Bulgaars 6671
Burmees 7789
Wit-russisch 6669
Chinees 9072
Kroatisch 7282
Tsjechisch 6783
Deens 6865
Nederlands 7876
English 6978
Esperanto 6979
Ests 6984
Faroëse 7079
Fijis 7074
Fins 7073
Frans 7082
Fries 7089
Keltisch 7176
Georgies 7565
Duits 6869
Grieks 6976
Groenlands 7576
Guarani 7178
Gujarati 7185
Hausa 7265
Hebreeuws 7387
Hindi 7273
Hongaars 7285
Ijslands 7383
Indonesisch 7378
Interlingua 7365
Iers 7165
Italiaans 7384
Japans 7465
Canada 7578
Kashmiri 7583
Kazakh 7575
Kirghiz 7589
Koreaans 7579
Koerdisch 7585
Laothiaans 7679
Latijns 7665
Lets 7686
Lingalaas 7678
Litouws 7684
Macedonies 7775
Malagasy 7771
Maleis 7783
Malayalam 7776
Maori 7773
Marathi 7782
Moldavisch 7779
Mongools 7778
Nauru 7865
Nepalees 7869
Noors 7879
Oriya 7982
Panjabi 8065
Pashto, Pushto 8083
Perzisch 7065
Pools 8076
Portugees 8084
Quechua 8185
Reto-romaans 8277
Roemeens 8279
Russisch 8285
Samoaans 8377
Sanskriet 8365
Schots Keltisch 7168
Servisch 8382
Servo-Kroatisch 8372
Shona 8378
Sindhi 8368
Singalees 8373
Slovaaks 8375
Sloveens 8376
Spaans 6983
Soedanees 8385
Swahili 8387
Zweeds 8386
Tagalog 8476
Tajik 8471
Tamil 8465
Telugu 8469
Thai 8472
Tonga 8479
Turks 8482
Turkmeens 8475
Twi 8487
Oekraïens 8575
Urdu 8582
Oezbeeks 8590
Vietnamees 8673
Volapük 8679
Welsh 6789
Wolof 8779
Xhosa 8872
Yiddish 7473
Yoruba 8979
Zulu 9085
HB985-DB.BDEUPPK_DUT.indd 69HB985-DB.BDEUPPK_DUT.indd 69 2010-05-14  2:58:132010-05-14  2:58:13
70
Bijlage
Bijlage
7
Resolutie video-uitvoersignaal
Wanneer de niet tegen kopiëren beschermde media worden afgespeeld
Video-uitgang
Resolutie
HDMI OUT
COMPONENT VIDEO UIT
HDMI aangesloten HDMI ontkoppeld
576i (480i) 576p (480i) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 720p
1080i 1080i 1080i
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 1080i
1080p / 50 Hz 1080p / 50 Hz 576i (480i) 1080i
Bij afspelen van beveiligde media
Video-uitgang
Resolutie
HDMI OUT
COMPONENT VIDEO UIT
HDMI aangesloten HDMI ontkoppeld
576i (480i) 576p (480p) 576i (480i)
576p (480p) 576p (480p) 576p (480p)
720p 720p 576i (480i) 576p (480p)
1080i 1080i 576i (480i) 576p (480p)
1080p / 24 Hz 1080p / 24 Hz 576i (480i) 576p (480p)
1080p / 50 Hz 1080p / 50 Hz 576i (480i) 576p (480p)
HDMI-uitgang
Bij de 576i (480i) resolutie instelling, wordt
de werkelijk uitgevoerde resolutie van
HDMI OUT gewijzigd in 576p (480p).
Indien u een resolutie met de hand
selecteert en vervolgens de HDMI
contrastekker aansluit op uw TV en uw
TV accepteert dit niet, dan is de resolutie
instelling ingesteld op [Auto].
Als u een resolutie kiest die uw tv niet
accepteert, verschijnt een waarschuwing.
Wacht ca. 20 seconden als u na aanpassing
van de resolutie geen beeld ziet waarna de
resolutie automatisch teruggaat naar de
vorige resolutie.
De 1080p framesnelheid van de video-
uitgang wordt automatisch ingesteld op 24
Hz of 50 Hz afhankelijk van de mogelijkheid
en voorkeur van de aangesloten TV en
gebaseerd op de video-framesnelheid van
de BD-ROM disk.
COMPONENT VIDEO-uitgang
BD of DVD kan het upscalen van analoge
uitgangssignalen voorkomen.
VIDEO-uitgang
De resolutie van de video-uitgang wordt altijd
uitgevoerd op resolutie 576i (480i).
HB985-DB.BDEUPPK_DUT.indd 70HB985-DB.BDEUPPK_DUT.indd 70 2010-05-14  2:58:132010-05-14  2:58:13
71
Bijlage
7
Bijlage
“Blu-ray Disc” en zijn handelsmerken.
“BD-LIVE” logo is een handelsmerk van Blu-Ray
organisatie.
“BONUSVIEW is een handelsmerk van Blu-Ray Disc
Association.
Java en alle op Java gebaseerde handelsmerken
en logos zijn handelsmerken of gedeponeerde
handelsmerken van Sun Microsystems, Inc. in de
Verenigde Staten en andere landen.
Gefabriceerd onder licentie van Dolby
Laboratories. Dolby en het dubbele-D-symbool
zijn handelsmerken van Dolby Laboratories.
Gefabriceerd onder licentie van een of meer van
de volgende Amerikaanse patenten: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 en andere verleende en aangevraagde
Amerikaanse en wereldwijde patenten. DTS en het
DTS-symbool zijn gedeponeerde handelsmerken.
DTS-HD, DTS-HD Master Audio l Essential en de
DTS logos zijn handelsmerken van DTS, Inc. Het
product bevat software van derden. © DTS, Inc.
Alle rechten voorbehouden.
HDMI, het HDMI Logo en High-De nition
Multimedia Interface zijn handelsmerken of
gedeponeerde handelsmerken van HDMI
Licensing, LLC in de Verenigde Staten en in andere
landen.
is een handelsmerk van DVD Format/Logo
Licentiebedrijf.
TM
DLNA en DLNA CERTIFIED zijn handelsmerken
en/of sevicemerken van Digital Living Network
Alliance.
DivX is een gedeponeerd handelsmerk van DivX,
Inc. en wordt in licentie gebruikt.
“x.v.Color of “x.v.Colour” is een handelsmerk van
Sony Corporation.
Handelsmerken en licenties
HB985-DB.BDEUPPK_DUT.indd 71HB985-DB.BDEUPPK_DUT.indd 71 2010-05-14  2:58:132010-05-14  2:58:13
72
Bijlage
Bijlage
7
AVCHD” en het AVCHD” logo zijn handelsmerken
van Panasonic Corporation en Sony Corporation.
Dit product is gelicenseerd volgens de AVC
patent portfolio licentie en VC-1 patent portfolio
licentie voor het persoonlijke en niet-commercieel
gebruik van een consument voor het (i) coderen
van video volgens de AVC Standaard en VC-1
Standaard (“AVC/VC-1 Video) en/of (ii) coderen
van AVC/VC-1 video die gecodeerd werd door
een consument die betrokken is bij persoonlijke
en niet-commercieel activiteiten en/of werd
verkregen van een video provider die een licentie
heeft om AVC/VC-1 Video te verstrekken. Er
wordt geen licentie toegekend voor enig ander
gebruik, impliciet of expliciet. Extra informatie kan
verkregen worden van MPEG LA, LLC. Zie
http://www.mpegla.com.
De naam iPod is een handelsmerk van Apple
Computer, Inc. dat gedeponeerd is in de Verenigde
Staten en andere landen.
iPhone is een handelsmerk van Apple Inc.
“Made for iPod” betekent dat een elektronisch
accessoire speciaal voor aansluiting op een iPod is
ontwikkeld en door de ontwerper goedgekeurd
volgens de kwaliteitsnormen van Apple.
Works with iPod” betekent dat een elektronisch
accessoire speciaal voor aansluiting op een iPod is
ontwikkeld en door de ontwerper goedgekeurd
volgens de kwaliteitsnormen van Apple.
Apple is niet verantwoordelijk voor de werking
van dit apparaat of het voldoen ervan aan de
veiligheidsnormen en de wettelijke normen.
Windows Media is een gedeponeerd handelsmerk
of een handelsmerk van Microsoft Corporation in de
Verenigde Staten en/of in andere landen.
Dit product bevat technologie die eigendom is van
Microsoft Corporation en deze kan niet worden
gebruikt of gedistribueerd zonder een licentie van
Microsoft Licensing, Inc.
®
Bluetooth® draadloze technologie is een systeem dat
radiocontact tussen elektronische apparaten binnen
een maximum afstand van 10 meter mogelijk maakt.
Voor het aansluiten van afzonderlijke apparaten door
middel van draadloze Bluetooth technologie zijn
geen kosten verschuldigd. Een mobiele telefoon met
draadloze Bluetooth technologie kan via de Cascade
worden gebruikt als de verbinding via draadloze
Bluetooth technologie wordt opgebouwd. Het
woordmerk en de logos van Bluetooth zijn eigendom
van Bluetooth SIG, Inc. en voor het gebruik daarvan
is aan Pioneer Corporation licentie verleend. Andere
handelsmerken en handelsnamen zijn eigendom van
de betre ende eigenaren.
HB985-DB.BDEUPPK_DUT.indd 72HB985-DB.BDEUPPK_DUT.indd 72 2010-05-14  2:58:142010-05-14  2:58:14
73
Bijlage
7
Bijlage
Technische gegevens
Algemeen
• Voeding:
AC 220-240 V, 50/ 60 Hz
• Opgenomen vermogen:
150 W
In standby-modus: minder dan 0,5 W.
• Afmetingen (bxhxd):
plm. 430 × 64 × 304 mm
Netto gewicht (plm.):
3,6 kg
• Bedrijfstemperatuur:
41 °F t/m 95 °F (5 °C t/m 35 °C)
Relatieve vochtigheid omgeving:
5 % t/m 90 %
• Usb-busvoeding:
DC 5 V gelijkstroom over
500 mA
Ingangen / uitgangen
• VIDEO OUT:
1,0 V (p-p), 75 Ω, negatieve synchronisatie,
1x RCA-aansluiting
• COMPONENT VIDEO OUT:
(Y) 1,0 V (p-p), 75 Ω, negatieve synchronisatie,
1x RCA-aansluiting, (Pb)/(Pr) 0,7 V (p-p), 75 ohm,
2 RCA-aansluitingen
HDMI OUT (video/audio):
19-polig (HDMI-norm, type A, Versie 1.3)
Analogue AUDIO IN:
2,0 Vrms (1 kHz, 0 dB), 600 Ω,
1 RCA aansluiting (L, R)
DIGITAL IN (OPTICAL 1/2):
3 V (p-p), 2 optische aansluitpunten
• PORTABLE IN:
0,5 Vrms (3,5 mm stereoaansluiting)
Tuner
• Afstembereik fm-band:
87,5 t/m 108,0 MHz of 87,50 t/m 108,00 MHz
Versterker
Uitgangsvermogen, (piekvermogen), (4 Ω/3 Ω)
Totaal 1100 W
Voorzijde 180 W x 2
Centre 180 W
Achter 180 W x 2
Sub-Woofer 200 W (Passive)
Uitgangsvermogen, (RMS), THD 10 % (4 Ω/3 Ω)
Totaal 930 W
Voorzijde 150 W x 2
Centre 150 W
Achter 150 W x 2
Sub-Woofer 180 W (Passive)
Systeem
• Laser:
Halfgeleiderlaser,
Gol engte: 405 nm / 650 nm
• Signaalsysteem:
Standaard NTSC/PAL kleurentelevisiesysteem
• Frequentiegebied:
20 Hz – 20 kHz
(bemonstering bij 48, 96 en 192 kHz)
• LAN-poort:
Ethernet-aansluiting 1x, 10BASE-T/100BASE-TX
HB985-DB.BDEUPPK_DUT.indd 73HB985-DB.BDEUPPK_DUT.indd 73 2010-05-14  2:58:142010-05-14  2:58:14
74
Bijlage
Bijlage
7
Luidsprekers BCS-707
S-BD707
• Front/surround-luidsprekerbox (links/rechts)
Type: tweeweg
Gewogen impedantie: 4 Ω
Afmetingen 260 x 1097 x 260 mm
(bxhxd):
Netto gewicht: 3,8 kg
• Middenluidspreker
Type: eenweg
Gewogen impedantie: 4 Ω
Afmetingen 300 x 87x 65 mm
(bxhxd):
Netto gewicht: 0,6 kg
S-BD707SW
• Subwoofer
Type: eenweg, 1 luidspreker
Gewogen impedantie: 3 Ω
Afmetingen 130,5 x 420 x 375 mm
(bxhxd):
Netto gewicht: 4,4 kg
Luidsprekers BCS-303
S-BD303
• Front/surround-luidsprekerbox (links/rechts)
Type: eenweg
Gewogen impedantie: 4 Ω
Afmetingen 96 x 96 x 85 mm
(bxhxd):
Netto gewicht: 0,4 kg
• Middenluidspreker
Type: eenweg
Gewogen impedantie: 4 Ω
Afmetingen 300 x 87 x 65 mm
(bxhxd):
Netto gewicht: 0,6 kg
• Subwoofer
Type: eenweg, 1 luidspreker
Gewogen impedantie: 3 Ω
Afmetingen 130,5 x 420 x 375 mm
(bxhxd):
Netto gewicht: 4,4 kg
HB985-DB.BDEUPPK_DUT.indd 74HB985-DB.BDEUPPK_DUT.indd 74 2010-05-14  2:58:142010-05-14  2:58:14
75
Bijlage
7
Bijlage
Kennisgeving over
open-source software
De volgende in dit product gebruikte uitvoerbare
GPL-bestanden en LGPL-programmabibliotheken
zijn onderworpen aan licentieovereenkomsten voor
GPL2.0/LGPL2.1:
UITVOERBARE GPL-BESTANDEN: Linux kernel
2.6, bash, busybox, cramfs, dhcpcd, e2fsprogs, fdisk,
mkdosfs, mtd-utils, net-tools, procps, samba-3.0.25b,
sysutils, tcpdump, tftpd, tinylogin, unzip, utelnetd
LGPL-PROGRAMMABIBLIOTHEKEN: uClibc,
DirectFB, blow sh, cairo,  mpeg, iconv, libusb,
mpg123
gSOAP Public License 1.3 BIBLIOTHEEK: gsoap
Een exemplaar van de corresponderende broncode
is verkrijgbaar door betaling van een vergoeding
voor de afgifte. Neem contact op met de
dichtstbijzijnde Pioneer klantenondersteuning om
een exemplaar van de broncode te verkrijgen.
Een exemplaar van de GPL en LGPL-licenties is
verkrijgbaar via http://www.gnu.org/licenses/old-
licenses/gpl-2.0.html en http://www.gnu.org/
licenses/old-licenses/lgpl-2.1.html.
U kunt ook een exemplaar van de openbare gSOAP-
licentie downloaden van
http://www.cs.fsu.edu/~engelen/license.html.
Deze software is gedeeltelijk gebaseerd op de
inbreng van de onafhankelijke JPEG Group copyright
© 1991 - 1998, Thomas G. Lane.
Dit product bevat:
boost C++: copyright © Beman Dawes 1999-2003
c-ares: copyright © 1998 by the Massachusetts
Institute of Technology
curl: copyright © 1996 - 2008, Daniel Stenberg
expat: copyright © 2006 expat maintainers
freetype: copyright © 2003 The FreeType Project
(www.freetype.org).
jpeg: Deze software is gedeeltelijk gebaseerd op
de inbreng van de onafhankelijke JPEG Group
copyright © 1991 - 1998, Thomas G. Lane.
mng: copyright © 2000-2007 Gerard Juyn, Glenn
Randers-Pehrson
ntp: copyright © David L. Mills 1992-2006
• OpenSSL:
cryptogra sche software geschreven door Eric
Young (eay@cryptsoft.com).
software geschreven door Tim Hudson
(tjh@cryptsoft.com).
Software ontwikkeld door het OpenSSL Project
voor gebruik in de OpenSSL Toolkit.
(http://www.openssl.org)
png: copyright © 2004 Glenn Randers-Pehrson
portmap: copyright © 1990 The Regents of the
University of California.
ptmalloc : copyright © 2001-2006 Wolfram Gloger
UnitTest++: copyright © 2006 Noel Llopis and
Charles Nicholson
UPnP SDK : copyright © 2000-2003 Intel
Corporation
• strace :
copyright © 1991, 1992 Paul Kranenburg
copyright © 1993 Branko Lankester
copyright © 1993 Ulrich Pegelow
copyright © 1995, 1996 Michael Elizabeth Chastain
copyright © 1993, 1994, 1995, 1996 Rick Sladkey
copyright © 1999,2000 Wichert Akkerman
xml2 : copyright © 1998-2003 Daniel Veillard
XML-RPC For C/C++:
copyright © 2001 by First Peer, Inc. Alle rechten
voorbehouden.
copyright © 2001 by Eric Kidd. Alle rechten
voorbehouden.
zlib: copyright © 1995-2002 Jean-Loup Gailly en
Mark Adler.
Alle rechten voorbehouden.
Hierbij wordt aan elke persoon die een
exemplaar van deze software en de bijbehorende
documentatiebestanden (de “Software”) verkrijgt
zonder kosten toestemming verleend om deze
software onbeperkt te verhandelen, inclusief het
onbeperkte recht tot het gebruiken, kopiëren,
wijzigen, integreren, publiceren, distribueren, in
onderlicentie geven en/of verkopen van kopieën
van de software en personen aan wie de software is
verstrekt toe te staan aldus te handelen, mits aan de
volgende voorwaarden wordt voldaan:
DE SOFTWARE WORDT ALS ZODANIG VERSTREKT
ZONDER ENIGE NADRUKKELIJKE OF IMPLICIETE
GARANTIE DAN OOK, INCLUSIEF MAAR NIET BEPERKT
TOT DE GARANTIES VAN VERKOOPBAARHEID,
GESCHIKTHEID VOOR EEN BEPAALD DOEL EN
NIET-INBREUKMAKING. DE SCHRIJVERS OF DE
RECHTHEBBENDEN OP DE AUTEURSRECHTEN
ZULLEN IN GEEN GEVAL AANSPRAKELIJK ZIJN
VOOR ENIGE CLAIM, SCHADE OF ANDERE
AANSPRAKELIJKHEID ALS GEVOLG VAN EEN
CONTRACTUELE VERPLICHTING, ONRECHTMATIGE
DAAD OF ANDERSZINS, VOORTKOMEND UIT OF IN
VERBAND MET DE SOFTWARE OF HET GEBRUIK VAN
OF ANDERE TRANSACTIES IN DE SOFTWARE.
HB985-DB.BDEUPPK_DUT.indd 75HB985-DB.BDEUPPK_DUT.indd 75 2010-05-14  2:58:142010-05-14  2:58:14
76
Bijlage
Bijlage
7
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
Manufacturer:
Pioneer Corporation
1-1, SHIN-OGURA, SAIWAI-KU,
KAWASAKI-SHI,
KANAGAWA-KEN 212-0031, JAPAN
EU Representatives:
Pioneer Europe NV
Haven 1087, Keetberglaan 1,
9120 Melsele, Belgium
http://www.pioneer.eu
English:
Hereby, Pioneer, declares that this BCS-707
(BCS-303) is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC.
Suomi:
Pioneer vakuuttaa täten että BCS-707 (BCS-
303) tyyppinen laite on direktiivin 1999/5/
EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Nederlands:
Hierbij verklaart Pioneer dat het toestel BCS-
707 (BCS-303) in overeenstemming is met
de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Français:
Par la présente Pioneer déclare que
l’appareil BCS-707 (BCS-303) est conforme
aux exigences essentielles et aux autres
dispositions pertinentes de la directive
1999/5/CE.
Svenska:
Härmed intygar Pioneer att denna BCS-707
(BCS-303) står I överensstämmelse med de
väsentliga egenskapskrav ch övriga relevanta
bestämmelser som framgår av direktiv
1999/5/EG.
Dansk:
Undertegnede Pioneer erklærer herved,
at følgende udstyr BCS-707 (BCS-303)
overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF.
Deutsch:
Hiermit erklärt Pioneer, dass sich dieses BCS-
707 (BCS-303) in Übereinstimmung mit den
grundlegenden Anforderungen und den
anderen relevanten Vorschriften der Richtlinie
1999/5/EG.
Ελληνικά:
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Pioneer ΔΗΛΩΝΕΙ ΟΤΙ
BCS-707 (BCS-303) ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ
ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/
ΕΚ.
Italiano:
Con la presente Pioneer dichiara che questo
BCS-707 (BCS-303) è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
Español:
Por medio de la presente Pioneer declara
que el BCS-707 (BCS-303) cumple con los
requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
HB985-DB.BDEUPPK_DUT.indd 76HB985-DB.BDEUPPK_DUT.indd 76 2010-05-14  2:58:142010-05-14  2:58:14
77
Bijlage
7
Bijlage
Português:
Pioneer declara que este BCS-707 (BCS-303)
está conforme com os requisitos essenciais e
outras disposições da Directiva 1999/5/CE.
Čeština:
Pioneer tímto prohlašuje, že tento BCS-
707 (BCS-303) je ve shodě se základními
požadavky a dalšími příslušnými
ustanoveními směrnice 1999/5/ES.
Eesti:
Käesolevaga kinnitab Pioneer seadme BCS-
707 (BCS-303) vastavust direktiivi 1999/5/
EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
Magyar:
Alulírott, Pioneer nyilatkozom, hogy a BCS-
707 (BCS-303) megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv
egyéb elõírásainak.
Latviešu valoda:
Ar šo Pioneer deklarē, ka BCS-707 (BCS-
303) atbilst Direktīvas 1999/5/EK būtiskajām
prasībām un citiem ar to saistītajiem
noteikumiem.
Lietuvių kalba:
Šiuo Pioneer deklaruoja, kad šis BCS-707 (BCS-
303) (BCS-303) atitinka esminius reikalavimus
ir kitas 1999/5/EB Direktyvos nuostatas.
Malti:
Hawnhekk, Pioneer jiddikjara li dan BCS-707
(BCS-303) jikkonforma mal-ħtiġijiet essenzjali
u ma provvedimenti oħrajn relevanti li hemm
d-Dirrettiva 1999/5/EC.
Slovenčina:
Pioneer týmto vyhlasuje, že BCS-707 (BCS-
303) spĺňa základné požiadavky a všetky
príslušné ustanovenia Smernice 1999/5/ES.
Slovenščina:
Pioneer izjavlja, da je ta BCS-707 (BCS-303) v
skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/5/ES.
Română:
Prin prezenta, Pioneer declara ca acest
BCS-707 (BCS-303) este in conformitate
cu cerintele esentiale si alte prevederi ale
Directivei 1999/5/EU.
български:
С настоящето, Pioneer декларира, че
този BCS-707 (BCS-303) отговаря на
основните изисквания и други съответни
постановления на Директива 1999/5/EC.
Polski:
Niniejszym Pioneer oświadcza, że BCS-
707 (BCS-303) jest zgodny z zasadniczymi
wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Norsk:
Pioneer erklærer herved at utstyret BCS-
707 (BCS-303) er i samsvar med de
grunnleggende krav og øvrige relevante krav
i direktiv 1999/5/EF.
Íslenska:
Hér með lýsir Pioneer y r því að BCS-707
(BCS-303) er í samræmi við grunnkröfur
og aðrar kröfur, sem gerðar eru í tilskipun
1999/5/EC.
HB985-DB.BDEUPPK_DUT.indd 77HB985-DB.BDEUPPK_DUT.indd 77 2010-05-14  2:58:142010-05-14  2:58:14
http://www.pioneer.co.uk
http://www.pioneer.fr
http://www.pioneer.de
http://www.pioneer.it
http://www.pioneer.nl
http://www.pioneer.be
http://www.pioneer.es
http://www.pioneer.eu
Published by Pioneer Corporation.
Copyright © 2010 Pioneer Corporation.
All rights reserved.
Publication de Pioneer Corporation.
© 2010 Pioneer Corporation.
Tous droits de reproduction et de traduction réservés.
Printed in Indonesia / Imprimé en Indonesia
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
HB985-DB.BDEUPPK_DUT.indd 78HB985-DB.BDEUPPK_DUT.indd 78 2010-05-14  2:58:142010-05-14  2:58:14
1/448