fp floor protector GmbH

Waldgasse 2

A-2700 Wr. Neustadt

Certification information

a) User Information gem. FCC 15.21 enthalten:

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to

operate the equipment.

interference that may cause undesired operation of the device.

c) Statement gem.RSS GEN Issue 5:c) Statement gem.RSS GEN Issue 5:

This device contains licence-exempt transmitter(s)/receiver(s)

that comply with Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is subject to the

following two conditions:

(1) This device may not cause interference

(2) This device must accept any interference, including interference

that may cause undesired operation of the device.that may cause undesired operation of the device.

Cet appareil contient des émetteurs / récepteurs exemptés de

• Always store unassembled easyloggers in the original packaging

in a frost-proof and dry place

• Protect from direct sunlight

• Do not built in damaged devices

• Do not open or modify the device

• Never keep next to magnetic fields

Hints

Read out the easylogger is possible with an own APP, called

“easylogger”, which is available for Android and Apple-Smartphones

in the respective store (Apple-AppStore or Android-PlayStore).

With the easylogger, the room climate can be measured directly on the

screed-surface during the screed drying and the associated diagram

can be displayed.

The data can be read out contactless via radio connection with The data can be read out contactless via radio connection with

synchronization using a mobile phone or a PC.

The device can be read out up to five times.

Product description

Drill, with a 35mm drill, an approximately 18mm deep hole into the

subsurface and glue the easylogger into the borehole with filler or

floor adhesive (see picture).

edge of the screed (see picture).

Version 1 - straight into the fresh screed

Installation

Quick guide