Documenttranscriptie

INSTALLATION MANUAL of Intel’s 1156 Mounting Clip Disassemble the Intel LGA-775 clip with screw driver and mount the Intel LGA-1156 clip on the heatsink and tighten it by using a screw driver. Entfernen Sie den Intel LGA-775 Clip mit einem Schraubendreher und installieren Sie den Intel LGA-1156 Clip mit einem Schraubendreher auf dem Kühlkörper. Retirer le système d’accroche pour socket Intel LGA-775 en utilisant un tournevis et monter le système d’accroche pour plateforme Intel LGA-1156 sur le ventirad et serrer à l’aide d’un tournevis. Desmontar el Intel LGA-775 con un destornillador en montar el gancho Intel LGA-1156 en el Heatsinkapretar usando el destornillador. Verwijder de Intel LGA-775 clip met een schroe-vendraaier en plaats de Intel LGA-1156 clip op de heatsink. Schroef de clip vast met een schroevendraaier. Limits of Warranty Warranty coverage does not include the following: - A faulty product that leads to harm or damage to other products - Damage of product as a result of other product components - Incorrect method of operation or use of product not for intended use - Any form of alteration to original product - Inability to install the product as a result of incompatibility with other components. © Copyright 2009 all rights reserved by GELID Solutions Limited The Specifications are subject to change without notice. Please consult our website for further information: www.gelidsolutions.com Disclaimer: In no event shall GELID Solutions its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product. All Brand names & Trademarks are the properties of their respective owners.