23500
Kawasaki Z900RS Fly Screen Fitting Instructions
Follow the diagrams below for assistance when fitting.
Fitting notes:
The Z900RS internal nut on the headlight needs to be accessed to
tighten up the fly screen brackets.
To do this the outer ring of the headlight (shown in diagram above)
needs to be removed temporarily. This can be achieved by
removing the two small bolts on the underside of the headlight
and unclipping the outer ring at the top.
and unclipping the outer ring at the top.
The outer ring can be difficult to refit once the Pyramid Fly Screen is
in place so it’s best to remove the Pyramid Fly Screen from the
brackets supplied (shown as ‘5’ in diagram above) once the
brackets are tightened up in the correct position.
Items from this list in GREY are not needed for fitment on the Z900RS
5
OEM Bolt
OEM Nut
Headlight Brackets
Outer Ring
Fairing
Screen
M6 X 20
mm
Bolt
Screen Kit
(3X Well Nuts, M5 X 16
mm
Bolts, Washers & Bolt Caps)
Metal Brackets
(pair)
M6 X 8
mm
Bolts
M6 X 12
M6 X 12
mm
Bolts & Nuts
M6 Plastic Washers
M8 Nuts
M8 X 35
mm
Bolts
M8 Steel Washers
M8 X 15
mm
X 9
mm
Spacers
M6 X 12
mm
X 8
mm
Spacers
Rubber Trim
Rubber Trim
Yellow Ball Decals - two designs (for
23500P
only)
CBRA08230P
1
2
3
4
5
6
7
7
8
9
10
11
12
13
14
14
15
Any questions?
sales@pyramid-plastics.co.uk
+44 (0)1427 677990
www.pyramid-plastics.co.uk
Follow us on social media and
feel free to leave us a review!
-
1
in andere talen
- English: Pyramid 23500 Installation guide
Andere documenten
-
BERLIN BG0421WH Handleiding
-
Pypes Performance Exhaust SJJ20SB Installatie gids
-
-
-
CNB VBM-21VF de handleiding
-
Rikon Power Tools 70-906 Handleiding
-
Alienware 13 R3 Handleiding
-
APEC Water Systems WH-SOLUTION-15 Handleiding
-
Bosch nkg 645 a de handleiding
-
Samsung CM1069A Handleiding
