Yamaha XS6 de handleiding

Type
de handleiding

Deze handleiding is ook geschikt voor

MOTIF XS Editor Owner’s Manual 1
Contents
What is the MOTIF XS Editor?.................................................2
Studio Manager ........................................................................2
Studio Connections .................................................................2
About Open Plug-in Technology .............................................3
Data Structure of the MOTIF XS Editor...................................4
Starting the MOTIF XS Editor ..................................................5
An Example of MOTIF XS Editor in Use .................................6
MOTIF XS Editor Window.......................................................12
Basic Operations....................................................................34
Menu ........................................................................................36
Troubleshooting .....................................................................52
Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for
your personal use.
The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.
Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without
the written consent of the manufacturer.
•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot
be held responsible for the results of the use of this manual and the software.
The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat
different from the screens which appear on your computer.
The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their
respective companies.
Click on the red-colored text to jump to the related item in this manual.
© 2008 Yamaha Corporation. All rights reserved.
This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operations. If you are not,
please refer to the owner’s manual which came with your Windows/Macintosh software before using the MOTIF XS
Editor.
For information about hardware requirements, the interconnection of devices and the installation of the MOTIF XS
Editor software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective MIDI
device.
MOTIF XS Editor
Owner’s Manual
MOTIF XS Editor
Owner’s Manual
What is the MOTIF XS Editor?
MOTIF XS Editor Owner’s Manual
2
What is the MOTIF XS Editor?
MOTIF XS Editor is a convenient tool which lets you edit and save the various parameters of your MOTIF XS
tone generator. These include Voice and Mixing parameters (edited in the Voice or Mixing mode of the
MOTIF XS) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-understand
graphical interface, you can edit various parameters of the MOTIF XS right from your computer—using the
mouse to adjust the virtual knobs, sliders, and buttons and entering values from the computer keyboard.
Finally, all the changes you have made can be saved to your computer or transmitted to the MOTIF XS
instrument.
You can use this MOTIF XS Editor as a plug-in for the software below
Studio Manager
•DAW application software compatible with Studio Connections
Studio Manager
Studio Manager V2 is a cross-platform application that enables you to start multiple Editors for controlling
Yamaha hardware products remotely, and to save multiple Editor settings. You can run Studio Manager as a
stand-alone application, or as a plug-in within DAW applications compatible with Studio Connections such
as Cubase 4 or Cubase AI 4.
For more information, refer to the Studio Manager PDF manual.
Studio Connections
Studio Connections is a joint project begun by Steinberg and Yamaha. Music
production systems now increasingly rely on both software and hardware, and there
is a pressing need for closer integration between the two. Studio Connections
provides a comprehensive and seamless music production environment—making the
use of hardware and software both easier and much more efficient. The following
functions are available in Studio Connections.
Recall
With the Recall function, all settings in each Editor can be saved within Studio Manager, and then called up
again when needed. This enables you to recall all the settings of multiple devices from Studio Manager and
control the entire system easily, instantly and automatically.
Recall is especially convenient when used with a DAW application compatible with Studio Connections. This
lets you save the Editor data directly to the project file of the DAW letting you recall all necessary hardware
settings automatically by simply opening the project file.
When executing the Recall function in the Studio Manager, the parameter settings of either device (MOTIF XS or DAW software on
a computer) are synchronized with the other. You can determine which device (MOTIF XS or DAW software) is regarded as the
master of the parameter settings by setting the Auto Sync Setting (page 40).
About Open Plug-in Technology
MOTIF XS Editor Owner’s Manual
3
Audio Integration
Plug-in software such as software synthesizers and software samplers are exceptionally convenient in that
they let you easily change the various settings and parameters within the host application. However, control
over hardware is not so easy—with the need for various setups such as audio connections, driver settings
and MIDI port connections.
By using a Studio Connections-compatible DAW software, you can control the external hardware synthesizer
within the application, without the need to set up complex connections within a DAW software application—
just as easily and conveniently as you would with plug-in software. The Audio Integration function makes all
this possible. For details about Recall and Audio Integration, visit our web site at:
http://www
.studioconnections.org/
About Open Plug-in Technology
Open Plug-in Technology (OPT) is a software format that enables you to control MIDI devices from a music
DAW application software. For example, this allows you to start up and operate various parts of your music
system, such as voice editors of the synthesizer and mixing control editors—directly from an OPT-compatible
software, without having to use each separately. OPT also makes it unnecessary to set MIDI drivers for each
application, streamlining your music production system and making all operations more convenient and
seamless.
In addition to the original OPT, Open Plug-in Technology Version 2 (OPT 2), designed for Studio Connections,
is also available. The host application Studio Manager supports OPT 2.
About the OPT 2 Overview
OPT 2 is a plug-in format that enhances OPT Level 1 (Panels) and adds some convenient
functions for Studio Connections.
Plug-in software compatible with OPT 2 is indirectly
connected to the DAW application compatible with
Studio Connection, via the Studio Manager.
Editor
Host
Application
Editor
Editor
OPT2
Studio
Manager
Data Structure of the MOTIF XS Editor
MOTIF XS Editor Owner’s Manual
4
Data Structure of the MOTIF XS Editor
The MOTIF XS Editor lets you create the following data and save them as a single file (extension: X0E).
Current Global data (latest status of edited global parameters)
Current data in the Voice mode (latest status of edited Voice)
Current data in the Song/Pattern mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices)
User Voice data (consisting of three Normal Voice Banks and one Drum Voice Bank)
Current settings includes the latest settings of the Common and Element parameters for the Voice last assigned to
each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for
each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The MOTIF
XS Editor lets you edit parameters (including Element parameters) of the Voice assigned to each Part and save the
latest edit status as a file without storing it as a User Voice or a Mixing Voice. This means that you can easily recall
the latest status of the previous edit simply by opening the file.
n The MOTIF XS Editor handles the Global data which includes some of the parameters shown on the “G” row in the Mixer
section and all the parameters in the Global Settings of the Parameter Category section (pages 20 and 23).
The diagram illustrated below indicates the structure of the data created via the MOTIF XS Editor, the
structure of the data stored in the internal memory of the MOTIF XS instrument and the relationship between
those two types of data.
*1 When the MOTIF XS instrument is connected to the computer properly with the ONLINE status, editing a parameter on the MOTIF XS Editor affects the same parameter on the MOTIF
XS itself, and vice versa.
*2 The Store Voice operation on the Editor will store the Voice data to the memory of the MOTIF XS instrument as well as the memory of the Editor.
*3 The Store Global operation and Store Mixing operation will store the data only to the memory of the MOTIF XS instrument.
MOTIF XS Editor (computer)
Current Global data
Current data in the Voice mode
Current data in the Song or
Pattern mode
• Multi Common data
Part Voice data
(16 Voices)
Mixing Voice data
(16 Voices)
Store Voice
*2
(page 47)
Store Voice
*2
(page 47)
User Voice data
• Normal User 1 (128 Voices)
• Normal User 2 (128 Voices)
• Normal User 3 (128 Voices)
• Drum User (32 Voices)
Editor file
(Extension: .X0E)
Data sync
*1
Data sync
*1
Data sync
*1
Current Global data
Current data in the Voice mode
Current data in the Song or
Pattern mode
• Multi Common data
Global data
User Voice data
• Normal User 1 (128 Voices)
• Normal User 2 (128 Voices)
• Normal User 3 (128 Voices)
• Drum User (32 Voices)
Part Voice data
(16 Voices)
Mixing data
• Multi Common data
Mixing Voice data
(16 Voices)
Store Voice
*2
(page 47)
Store Voice
*2
(page 47)
Store Voice
*2
(page 47)
Store Mixing
*3
(page 48)
Store Global
*3
(page 47)
MOTIF XS instrument
Store Voice
*2
(page 47)
Starting the MOTIF XS Editor
MOTIF XS Editor Owner’s Manual
5
Starting the MOTIF XS Editor
Install the driver (USB-MIDI driver or AI driver), Studio Manager and MOTIF XS Editor by following the
respective Installation Guides, then install the host application such as Cubase if necessary. After making
the required connection and setting the MIDI IN/OUT parameter to “USB” or “mLAN” in the Utility mode,
follow the instructions below to start the MOTIF XS Editor.
n For details about connection between the MOTIF XS and a computer, refer to the Owner’s Manual of the MOTIF XS.
1. Start the Studio Manager.
Studio Manager can be started as a plug-in within a Studio Connections-compatible DAW software, or
can be started as a stand-alone application.
2. Set the MIDI Ports.
When starting Studio Manager as a stand-alone application:
Set the MIDI Ports by calling up the MIDI Ports window via [File]
[Setup] ([SM2]
[Preference] for Mac)
[MIDI Settings]. When the connection is done via a USB cable, enter the checkmarks to the boxes of Por ts
1 and 4 for the MOTIF XS in both the Input Ports and the Output Ports, as illustrated below. When connection
is made via the IEEE1394 cable, enter checkmarks to the boxes of the Por ts corresponding to the mLAN MIDI
In and the mLAN MIDI Out of the MOTIF XS, in both the Input Por ts and the Output Ports.
When starting Studio Manager as a plug-in:
Set the MIDI Ports on the DAW application. For details, refer to the manual of your DAW application.
When connecting the MOTIF XS to a computer via a USB cable, the MIDI Ports are automatically set
simply by starting Studio Manager from Cubase 4 or Cubase AI 4. This is also true when connecting the
MOTIF XS to a computer via an IEEE1394 cable and installing “Extensions for Steinberg DAW” to the
computer.
3. Start the MOTIF XS Editor from the window of the Studio Manager.
For details, refer to the Installation Guide and the PDF manual of the Studio Manager.
When using Studio Manager as a plug-in with the Audio Integration features of Studio Connections
(within a compatible DAW), you can start the MOTIF XS Editor just as you would any other software
synthesizer. For details, visit the following web site.
http://www.studioconnections.org/
An Example of MOTIF XS Editor in Use
MOTIF XS Editor Owner’s Manual
6
An Example of MOTIF XS Editor in Use
There is no single way to use the many components in the MOTIF XS Editor. Your editing needs and
preferences may differ; however, the following example gives you a simple step-by-step guide in how to use
the MOTIF XS Editor. As an example, this section explains how to edit a Voice in the Voice mode, edit a
Mixing program in the Song mode, then store the edited data to the memory of the MOTIF XS instrument and
save the final results of your editing to a file.
n If the [Song] or [Pattern] indication (at the top left of the display) is on, perform the instructions below from step 1. If the
[Voice] indication is on, perform the instructions below from step 2.
1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left
of the display).
If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync
window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you
should proceed to step 3.
2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE]
indication is set to [OFFLINE].
3. On the Auto Sync window, set communication-related parameters such as Input Port,
Output Port and Device Number in the Data Port section, then set the direction of Data
Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section.
When you want to use the settings on the MOTIF XS itself as starting data for editing, set the boxes of
Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to the
computer. To use the settings on the MOTIF XS Editor as starting data, set both Global, Current and
Voice to the opposite, so that the arrow indicates data flow from the computer to the keyboard. For
details, see page 39.
CAUTION
Keep in mind that when you set Global, Current and User Voice to On, enable data sync from the computer to the MOTIF XS
(instrument), and then click the [Start] button at the bottom, this operation transmits these types of data currently on the
Editor to the MOTIF XS itself, automatically overwriting and erasing all the corresponding data already existing on memory of
the MOTIF XS instrument. When you want to use the settings on the MOTIF XS itself as starting data for editing, set the
boxes of Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to the computer.
An Example of MOTIF XS Editor in Use
MOTIF XS Editor Owner’s Manual
7
CAUTION
Regarding the data transfer for synchronization, the setting here takes precedence over that specified in Studio Manager.
Make sure to set the desired data transfer direction, regardless of the setting on the Studio Manager, in order to avoid data
loss.
4. From the Auto Sync window, click [Start] at the bottom.
The data synchronization will be started if the Port settings are correct. As soon as data synchronization
is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE
indication automatically. In this ONLINE status, editing a parameter on the MOTIF XS Editor affects the
same parameter on the MOTIF XS itself, and vice versa.
5. Edit the Voice in the Voice mode.
5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the
VOICE LIBRARY window.
5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to
the current Part.
You can confirm the sound of the selected Voice by clicking any note on the virtual keyboard or the
MOTIF XS keyboard.
5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY
window.
You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of
the window. By executing this operation, the Voice selection is reset to the original status and the VOICE
LIBRARY window closes.
An Example of MOTIF XS Editor in Use
MOTIF XS Editor Owner’s Manual
8
CAUTION
When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store the
edits, make sure to store the Voice by using the Store window (page 47) before changing the Voice.
5-4 Edit the Voice parameters as desired.
Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them.
To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the
MOTIF XS keyboard.
To make detailed settings of the selected Voice, click the arrow button at the top of the right panel
next to the main window to call up the Detailed Parameter section.
6. Store the edited settings as a User Voice, as necessary.
6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 47).
6-2 Select a Voice Bank from the following list:
• Normal User 1
• Normal User 2
• Normal User 3
• Drum User
n Normal User 1 – 3 are shown in the Store window when editing the Normal Voice while Drum User is shown in
the Store window when editing the Drum Voice.
An Example of MOTIF XS Editor in Use
MOTIF XS Editor Owner’s Manual
9
6-3 Open the selected Bank, select the desired number as destination, then enter the name
of the Voice in the box at the top of this window.
6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank.
Performing this operation will store the Voice data to the User Voice Bank in the MOTIF XS instrument as
well as that within the Editor.
CAUTION
When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument) will be
overwritten. Select the destination Voice number carefully to prevent important data from being erased accidentally.
n You can store the settings of the parameters in the “G” row by clicking [Store Global] under [Edit] in the menu
bar.
7. Edit the Mixing parameters in the Song mode.
This section explains how to edit a Mixing program in the Song mode.
7-1 Change the mode to the Song mode by clicking [Song] of the [Voice]/[Song]/[Pattern]
indication.
The Auto Sync window appears automatically.
7-2 From the Auto Sync window, click [Start] at the bottom.
Data synchronization will be started if the Port settings are correct. As soon as data synchronization is
completed, the Auto Sync window is closed.
An Example of MOTIF XS Editor in Use
MOTIF XS Editor Owner’s Manual
10
7-3 Edit the parameters of the Mixing and Voice assigned to each Part.
If you want to change the parameter values from the original ones of the selected Song or Pattern, click
(drag and drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/
Multi section and “1” – “16” in the Part section.
To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard.
To make detailed settings of the selected Multi, click the arrow button at the top of the right panel
next to the main window to call up the Detailed Parameter section.
n The MOTIF XS Editor lets you edit the Voice parameters in the Song or Pattern mode as well as Voice mode.
In the Voice mode, you can edit only the selected Voice. In the Song or Pattern mode, on the other hand, you
can edit the parameters of the Voice assigned to each Part as well as the Mixing parameters. The edited
Voice can be stored to the same Voice Bank as a User Voice regardless of the mode used for editing.
An Example of MOTIF XS Editor in Use
MOTIF XS Editor Owner’s Manual
11
8. Store the edited Voice or a Mixing, as necessary.
8-1 On the MOTIF XS instrument, press the [STORE] button to call up the Mixing Store
window, select the destination, then press the [ENTER] button to store the edited Mixing.
For details, refer to the Owner’s Manual of the MOTIF XS.
n You can store the edited Mixing also by selecting [Store Mixing] under [Edit] in the menu bar. Note that this
operation does not allow you to select the Song as destination and the edited Mixing will be stored to the
currently selected Song.
8-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in
the menu bar to call up the Store window (page 47) then store the Voice via the same
operations as in steps 6-1, 6-2, 6-3 and 6-4.
9. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a file
(extension: *.X0E).
All the settings you made and the Voice data you stored to the User Banks will be saved as a single file
(extension: X0E). When you open this file next time to call up the Auto Sync window, click [Start] to
synchronize the status of the parameter settings between the MOTIF XS Editor and the MOTIF XS
instrument.
When starting the MOTIF XS Editor from Studio Manager, you can save the MOTIF XS Editor data into a
Document file of Studio Manager.
When using DAW (digital audio workstation) software compatible with Studio Connections and the
Studio Manager together, the MOTIF XS Editor data can be saved into a project file of the DAW.
MOTIF XS Editor Window: Overall section
MOTIF XS Editor Owner’s Manual
12
MOTIF XS Editor Window
Overall section
1 File, Edit, Bulk, Help
Refer to page 36.
2 Voice/Song/Pattern mode
Determines the mode of the MOTIF XS, Voice, Song or Pattern. As soon as “Voice,” “Song” or “Pattern” is
selected here, the mode of the MOTIF XS instrument changes accordingly and the Auto Sync window
(page 51) opens. After setting parameters as necessary on this window, click [Start] to execute data
synchronization between the MOTIF XS Editor and the MOTIF XS instrument.
3 ONLINE/OFFLINE
Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is
indicated, the edited status is completely synchronized between the MOTIF XS Editor and the MOTIF XS
instrument, meaning that any parameter edit you make on the MOTIF XS Editor is reflected in the same
parameter on the MOTIF XS instrument and vice versa. When OFFLINE is selected, editing on the MOTIF
XS Editor will not affect the MOTIF XS instrument and vice versa even if the MOTIF XS instrument is
connected to a computer.
Note that the indication here is automatically changed according to the status of communication
between the MOTIF XS Editor and the MOTIF XS instrument. For example, the ONLINE status changes
automatically to OFFLINE when the cable is disconnected accidentally.
1
Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE (2) described below.
Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the
MOTIF XS instrument is not properly connected to a computer.
2
This OFFLINE indication shows that the MIDI Port is set properly and the MOTIF XS is properly connected
to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you can
synchronize the settings between the MOTIF XS Editor and the MOTIF XS by clicking the [Start] button. As
soon as data synchronization is completed, the Auto Sync window is closed and the status of the Editor
changes from OFFLINE to ONLINE.
n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync
window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync
window.
3
This OFFLINE indication shows that the MIDI Port is not set properly or the MOTIF XS instrument is not
connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to
connect the MOTIF XS instrument to a computer, set the MIDI Port properly then click the [Start] button in
the Auto Sync window to execute data synchronization between the MOTIF XS Editor and the MOTIF XS
instrument. As soon as data synchronization is completed, the Auto Sync window is closed and the status
of the Editor is changed from OFFLINE to ONLINE.
1
2
3
MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor Owner’s Manual
13
Mixer section (when the Voice/Song/Pattern is set to “Voice”)
1 Global
This strip lets you edit the main parameters in the Voice mode, such as effect-related ones. Clicking “G”
turns this section on as illustrated below.
n When editing any of the Global parameters described below, a small square appears at the top right of the
“G” box until you save the edited data as a file. This indication is the same as the green [F] indicator
(page 25).
Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)
Edits the Master EQ parameters.
Chorus
Selects the Chorus type.
Reverb
Selects the Reverb type.
Master Effect
Tur ns the Master Effect on or off and selects the Master Effect type.
Volume
Adjust the entire volume.
2 [Voice]/[AD/mLAN Part] tab
Selects the Parts to be edited from [Voice] and [AD/mLAN Part]. The illustration below indicates that the
[Voice] tab is active.
1
3
2
Before editing
After editing
MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor Owner’s Manual
14
3 Voice
When the [Voice] is selected:
Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below.
n When editing any of the Voice parameters described below, a small square appears at the top right of the “V”
box until you save the edited data as a file or you store the edited data as a Voice. This indication is the same
as the blue [V] indicator (page 28).
Category, Bank, No., Voice Name
Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window
appears at the right half section, letting you select a different Voice for editing.
VOICE LIBRARY
1 Close button
Click this to close this window without applying the changes to the MOTIF XS Editor.
2 [Category]/[Bank] checkboxes
Click either of these boxes to determine whether the Voices listed here are divided into Category
folders or Bank folders.
3 [+]/[–] buttons
Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to
close all folders.
4 Folder (Category or Bank)
Click each folder to open or close it.
Before editing
After editing
19
3
4
5
2
67
8
MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor Owner’s Manual
15
5 Voices
Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When
double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the
Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by
dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-and-
dropping the Voice(s) to a new location.
When the Category checkbox is entered, a checkbox is shown at left of each Voice. If you enter
checkmarks to the checkboxes of your most-used or favorite Voice, you can call up a list of these
Voices on the VOICE LIBRARY by setting the [Favorites] checkbox to on.
n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as
normal on your computer OS.
n By right-clicking this section and selecting a menu, you can use the following functions.
Opening/closing all the folders
Determining whether the Voices listed here are divided into Category folders or Bank folders.
Copying/pasting
Changing the Voice name
Deleting all the checkmarks of the Favorites checkboxes at left of the Voices
6 Search Box
You can search for your desired Voice by inputting a keyword here.
7 [Favorites] checkbox
By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE
LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the
appropriate checkboxes (appearing only when the [Category] checkbox is entered) at the left of each
Voice.
8 [OK]/[Cancel] buttons
Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit
without applying the Voice selection.
9 Refresh
When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the MOTIF XS itself, the
name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the MOTIF
XS. If this happens, click this button to update the Voice names of the VOICE LIBRARY.
EQ Lo, Mi, Hi (Part EQ)
Adjusts the equalizer settings for the current Voice.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using
the graphic knobs.
Volume
Adjusts the volume of the current Voice.
ARP (Arpeggio)
Tur ns Arpeggio playback on or off for the current Voice.
MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor Owner’s Manual
16
When the [AD/mLAN Part] is selected:
This section lets you edit parameters for the AD/mLAN Part in the Voice mode. Clicking “AD” or “mLAN”
row turns this section on as illustrated below.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD/mLAN Part in the
Voice mode by using the graphic knobs.
Volume
Adjusts the Volume for the AD/mLAN Part.
Output Select
Determines the specific output(s) for the AD/mLAN Part.
LCD Output jacks Stereo/Mono
L&R OUTPUT L and R Stereo
asL&R ASSIGNABLE OUTPUT L and R Stereo
m1&2 mLAN OUTPUT 1 and 2 Stereo (1: L, 2: R)
m3&4 mLAN OUTPUT 3 and 4 Stereo (3: L, 4: R)
m5&6 mLAN OUTPUT 5 and 6 Stereo (5: L, 6: R)
m7&8 mLAN OUTPUT 7 and 8 Stereo (7: L, 8: R)
m9&10 mLAN OUTPUT 9 and 10 Stereo (9: L, 10: R)
m11&12 mLAN OUTPUT 11 and 12 Stereo (11: L, 12: R)
m13&14 mLAN OUTPUT 13 and 14 Stereo (13: L, 14: R)
asL ASSIGNABLE OUTPUT L Mono
asR ASSIGNABLE OUTPUT R Mono
m1 mLAN OUTPUT 1 Mono
:: :
m14 mLAN OUTPUT 14 Mono
MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
MOTIF XS Editor Owner’s Manual
17
Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
1 Global
This strip lets you edit the main parameters in the Song or Pattern mode, such as effect-related ones.
Clicking “G” turns this section on as illustrated below.
n When editing any of the Global parameters described below, a small square appears at the top right of the
“G” box until you save the edited data as a file. This indication is the same as the green [F] indicator
(page 28).
Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)
Adjusts the Master EQ setting.
Chorus
Selects the Chorus type.
Reverb
Selects the Reverb type.
Master Effect
Tur ns the Master Effect on or off and selects the Master Effect type.
Volume
Adjusts the entire volume.
1
3
2
Before editing
After editing
MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
MOTIF XS Editor Owner’s Manual
18
2 [Part 1-16]/[AD/mLAN Part] tab
Selects the Parts to be edited from [Part 1-16] and [AD/mLAN Part]. The illustration below indicates that
the [Part 1-16] tab is selected.
3 Part
When [Part 1-16] is selected:
This section lets you edit parameters for each Part. Clicking any of 1 – 16 turns the corresponding Part
on. In the example illustration below, Part 1 is active.
n When editing any of the Voice parameters such as Element parameters for each Part, a small square
appears at the top right of the “1” – “16” box until you store the edited Voice as a User Voice or Mixing Voice
or you save the edited data as a file. This indication is the same as the blue [V] indicator (page 28).
Part (Part number)
Indicates the Part number. Clicking here turns the corresponding Part on.
n In some situations, selecting a Part number on the Editor may not change a Part number on the MOTIF XS
and vice versa, even if the Editor is in the ONLINE status. If you come across such a situation and you want
to match the Part number of the MOTIF XS with the one in the Editor, change the Part number via the panel
controls of the MOTIF XS.
Mute/Solo
1 Mute
Sets the Mute status for each Part. Clicking “M” here changes the Mute status for all Parts
simultaneously.
2 Solo
Selects the Solo Part. Only one Part can be soloed at a time.
Category, Bank, No. and Voice Name
Indicates the Category Bank and name of the Voice assigned to each Part. When clicking here, the
VOICE LIBRARY window appears at the right half section, letting you select a different Voice for the
current Part. Using the VOICE LIBRARY is the same here as in the Voice mode; for details, refer to
page 14.
EQ Lo, Mi, Hi (Part EQ)
Adjusts the equalizer settings for each Part.
Ins.FX (Insertion Effect Switch)
Switches the Insertion Effect on or off.
n Insertion Effects can be applied up to eight Parts.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level, and stereo Pan position for each Part by using the
graphic knobs.
Volume
Adjusts the Volume for each Part.
12
MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
MOTIF XS Editor Owner’s Manual
19
Rcv Channel (Receive Channel)
Determines the MIDI Receive Channel for each Part.
Output Select
Determines the specific output(s) for the individual Part. The following settings are available.
* When a Normal Voice is assigned to the edited Part, this value is indicated as “L&R (dr)” and the sound will be
output via the OUTPUT L and R jacks in stereo. When a Drum Voice is assigned to the edited Part, this value is
indicated as “drum” and the sound will be output via the jacks set in the Drum Key Edit as the Output Select
parameter on the MOTIF XS Editor.
n Depending on the setting of the Quick Setup (page 32), the audio signal of Parts which are set to “L&R” or
“m1” – “m14” or “m1&2” – “m13&14” will be output via the OUTPUT L/R jack as well as mLAN.
ARP (Arpeggio)
Tur ns Arpeggio playback on or off for each Part.
n Up to four Parts can play back the Arpeggio simultaneously.
When [AD/mLAN Part] is selected:
This section lets you edit parameters for the AD/mLAN Part in the Song or Pattern mode. Clicking “AD”
or “mLAN” row turns this section on as illustrated below.
Ins FX (Insertion Effect)
Switches the Insertion Effect on or off (only in the AD Part).
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD/mLAN Part by
using the knob icons.
Volume
Adjusts the Volume for the AD/mLAN Part.
Output Select
Determines the specific output(s) for the AD/mLAN Part. The available settings are the same as those of
the AD/mLAN Part in the Voice mode. Refer to page 16.
LCD Output jacks Stereo/Mono
L&R OUTPUT L and R Stereo
asL&R ASSIGNABLE OUTPUT L and R Stereo
m1&2 mLAN OUTPUT 1 and 2 Stereo (1: L, 2: R)
m3&4 mLAN OUTPUT 3 and 4 Stereo (3: L, 4: R)
m5&6 mLAN OUTPUT 5 and 6 Stereo (5: L, 6: R)
m7&8 mLAN OUTPUT 7 and 8 Stereo (7: L, 8: R)
m9&10 mLAN OUTPUT 9 and 10 Stereo (9: L, 10: R)
m11&12 mLAN OUTPUT 11 and 12 Stereo (11: L, 12: R)
m13&14 mLAN OUTPUT 13 and 14 Stereo (13: L, 14: R)
asL ASSIGNABLE OUTPUT L Mono
asR ASSIGNABLE OUTPUT R Mono
m1 mLAN OUTPUT 1 Mono
:: :
m14 mLAN OUTPUT 14 Mono
drum See below* See below*
MOTIF XS Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor Owner’s Manual
20
Parameter Category section (when the Voice/Song/Pattern is set to
“Voice”)
You can edit detailed parameters for the current Part by clicking the button (located near the top right of
the window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed
Parameter section moves the Parameter Category Section rightward as shown below.
Parameter Category section
Parameter Category section Detailed Parameter section
MOTIF XS Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor Owner’s Manual
21
The indicated categories in the Parameter Category section differs depending on the selected row: G, V, or
AD/mLAN Part, as illustrated below. Clicking each of Categories calls up the corresponding parameters in
the Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “V”
indication shown below appears by clicking the “V” row appearing only when the [Voice] tab is selected at
the bottom of the Mixer section. The “AD/mLAN” indication shown below appears by clicking the “AD/mLAN”
row appearing only when the [AD/mLAN Part] tab is selected at the bottom of the Mixer section.
1 Open/Close button
This button opens/closes the Detailed Parameter section. When only the left arrow is indicated in white,
the Detailed Parameter section is hidden and you can call it up by clicking here. When only the right
arrow is indicated in white, the Detailed Parameter section is shown on the display, allowing you to edit
the displayed parameters. The Detailed Parameter section can be closed by clicking this button. You
can also conveniently open and close the Detailed Parameter window from your computer keyboard.
Hold down the <Ctrl> key (Command key for Mac) and simultaneously press the left arrow () key to
open the window, or hold <Ctrl> key (Command key for Mac) and press the right arrow () key to close
it.
2 Global Settings
This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter
categories calls up the corresponding Global parameters in the Detailed Parameter section.
3 Voice Common
This is shown when the “V” row is selected in the Mixer section. Clicking each of the parameter
categories calls up the corresponding Voice Common parameters in the Detailed Parameter section.
5
6
4
3
2
1
1 1
“G” “V” “AD/mLAN”
MOTIF XS Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor Owner’s Manual
22
4 Element or Drum Key
This is shown when the “V” row is selected in the Mixer section. When a Normal Voice is selected
(“Element” is shown in the Parameter Category section) and you select an Element number (from 1 –
16), then clicking each of the parameter categories calls up the corresponding Element parameters in
the Detailed Parameter section. When a Drum Voice is selected (“Drum Key” is shown in the Parameter
Category section) and you select a key number (from C0 – C6), then clicking each of the parameter
categories calls up the corresponding Drum Key parameters in the Detailed Parameter section.
1 Checkboxes for Elements (available when the Normal Voice is selected)
Tur ns each Element on or off.
2 [1] – [8], [All] buttons (available when the Normal Voice is selected)
Selects the Element to be edited. When [All] is selected, the Element Quick Setting window appears in the
Detailed Parameter section. This window conveniently lets you edit frequently-used Element parameters of
all Elements in a single window.
3 Element Parameter categories (available when the Normal Voice is selected)
Indicates the categories of Element parameters. Clicking each of the categories calls up the
corresponding Element parameters in the Detailed Parameter section.
4 Checkbox for the Drum Key (available when the Drum Voice is selected)
Tur ns the current Drum Key on or off.
5 Drum Key (available when the Drum Voice is selected)
Indicates the current Drum Key to be edited. You can select the Drum Key to be edited by clicking either of
the triangular buttons below the key indication.
6 Drum Key Parameter categories (available when the Drum Voice is selected)
Indicates the categories of Drum Key parameters. Clicking each of categories calls up the corresponding
Drum Key parameters in the Detailed Parameter section.
5 AD/mLAN
This is shown when the AD/mLAN Part is selected in the Mixer section. The Detailed Parameter section
shows the Effect-related parameters.
6 i (Information)
Indicates information about the parameter at the cursor arrow position. To view the information for a
desired parameter, mouse-over the knob, slider or setting for that parameter. You can switch this
Information feature on or off by clicking the “
i” box.
1
4
2 53 6
When the Normal Voice is
selected:
When the Drum Voice is
selected:
MOTIF XS Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
MOTIF XS Editor Owner’s Manual
23
Parameter Category section (when the Voice/Song/Pattern is set to
“Song” or “Pattern”)
You can edit detailed parameters for the current Part by clicking the button (located near the top right of the
window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed
Parameter section moves the Parameter Category Section rightward as shown below.
Parameter Category section
Parameter Category section Detailed Parameter section
MOTIF XS Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
MOTIF XS Editor Owner’s Manual
24
The indicated categories in the Parameter Category section differs depending on the selected Part type: M,
Part 1 – 16, or AD/mLAN Part. Clicking each of the Categories calls up the corresponding parameters in the
Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “Part 1
– 16” indication shown below appears by clicking any place on the Part row appearing only when the [Part 1-
16] tab is selected at the bottom of the Mixer section. The “AD/mLAN” indication shown below appears by
clicking the “AD/mLAN” row appearing only when the [AD/mLAN Part] tab is selected at the bottom of the
Mixer section.
1 Open/Close button
Same as in the Voice mode (page 21).
2 Global Settings
This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter
categories calls up the corresponding Global parameters in the Detailed Parameter section.
3 Multi Common
This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter
categories calls up the corresponding Common parameters in the Detailed Parameter section.
4 Part Common
This is shown when one of Parts 1 – 16 is selected in the Mixer section. Clicking each of the parameter
categories calls up the corresponding Common parameters of the Voice/Part in the Detailed Parameter
section.
5 Element or Drum Key
This is shown when one of Parts 1 – 16 is selected in the Mixer section. When a Normal Voice is
assigned to the current Part (“Element” is shown in the Parameter Category section) and you select an
Element number (from 1 – 16), then clicking each of the parameter categories calls up the
corresponding Element parameters in the Detailed Parameter section. When a Drum Voice is assigned
to the current Part (“Drum Key” is shown in the Parameter Category section) and you select a key
number (from C0 – C6), then clicking each of the parameter categories calls up the corresponding Drum
Key parameters in the Detailed Parameter section.
For details, see the Voice mode (page 22).
6 AD/mLAN
Same as in the Voice mode (page 22).
7 i (Information)
Same as in the Voice mode (page 22).
6
7
5
4
2
3
1
1 1
“G” Part 1 – 16 “AD/mLAN”
MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor Owner’s Manual
25
Detailed Parameter section (when the Voice/Song/Pattern is set to
“Voice”)
This section indicates the detailed parameters of the selected category for the current Voice or Global
settings. This section introduces what parameters belong to each of the Parameter Categories. For details
about each parameter, refer to the Owner’s Manual of the MOTIF XS.
Three Indicators showing the Editing Status
One or more of the following three indicators are shown at the right top of the window when you edit a
parameter.
n These indicators, “V,” “G” and “F” are linked with the small squares at the top right of “1” – “16” boxes and
“G” box in the Mixer section. The “V” and “G” indicators disappear if you execute the Voice Store, Mixing
Store and Global Store operation, respectively. The “F” indicator and the small squares at the top right of the
“G” box in the Mixer section disappear only if you execute the File Save operation. All the indicators and the
small squares disappear if you execute the File Save operation.
Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator
disappears when you execute Voice Store (page 47).
Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global
Store (page 47).
Indicates that the parameter edits are not saved yet as a file.
V, G, F
indicators
MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor Owner’s Manual
26
Global Settings
This Parameter category which is called up by selecting the “G” row in the Mixer section consists of the
following sub categories.
Master FX/EQ (Master Effect/EQ)
Clicking this in the Parameter Category section calls up the Master Effect/EQ parameters in the Detailed
Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by
selecting “Master FX” or “Master EQ” on the UTILITY window.
Controller Assign
Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed
Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by
selecting “Control” on the UTILITY window.
Micro Tuning
Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed
Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by
selecting “Tuning” on the UTILITY window.
Voice Common
This Parameter Category is called up by selecting the “V” row in the Mixer section. The parameters
belonging to this category lets you make the settings applied to all the Elements or Drum Keys commonly.
The following sub categories are included.
General
Clicking this in the Parameter Category section calls up the parameters such as Voice name and pitch-
related parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters
are the same as those called up by selecting “EG/EQ” on the Voice Play window ([VOICE] [F3]) and
“Name” and “Play Mode” on the VOICE Edit-Common window.
ARP (Arpeggio)
Clicking this in the Parameter Category section calls up the Arpeggio-related parameters in the Detailed
Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by
selecting “ARP Main” and “ARP Other” on the VOICE Edit-Common window.
Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which
lets you use the search function for the selecting Arpeggio Types, as with the VOICE LIBRARY window
(page 14).
Controller Set
Clicking this in the Parameter Category section calls up the Controller Set parameters in the Detailed
Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by
selecting “Control Set” on the VOICE Edit-Common window.
LFO (Low Frequency Oscillator)
Clicking this in the Parameter Category section calls up the LFO-related parameters in the Detailed
Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by
selecting “Com LFO” on the VOICE Edit-Common window. This Parameter Category is not available for
Drum Voices.
Effect
Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed
Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by
selecting “Effect” on the VOICE Edit-Common window.
MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor Owner’s Manual
27
Element or Drum Key
This Parameter Category is called up by selecting the “V” row in the Mixer section. The “Element” is shown
when the Normal Voice is selected while the “Drum Key” is shown when the Drum Voice is selected. The
parameters belonging to this category lets you make the settings applied to each of the Elements or Drum
Keys individually. The following sub categories are included.
n For information about the checkboxes at left of each Element number 1 – 8 and “All,” refer to page 22. For information
about the Drum Key (note name) and checkbox, refer to page 22.
Oscillator/Pitch
Clicking this in the Parameter Category section calls up the parameters related to the Oscillator and
Pitch in the Detailed Parameter section.
Filter
Clicking this in the Parameter Category section calls up the Filter-related parameters in the Detailed
Parameter section.
Amplitude
Clicking this in the Parameter Category section calls up the Amplitude-related parameters in the
Detailed Parameter section.
LFO/EQ (Low Frequency Oscillator/Equalizer)
Clicking this in the Parameter Category section calls up the parameters related to the LFO and EQ in the
Detailed Parameter section.
AD/mLAN
This Parameter Category is called up by selecting the “AD/mLAN” row in the Mixer section. The parameters
belonging to this category lets you make the settings applied to the AD/mLAN Part in the Voice mode. The
following sub category is included.
Effect
Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to
the AD/mLAN Part of the Voice mode in the Detailed Parameter section.
MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
MOTIF XS Editor Owner’s Manual
28
Detailed Parameter section (when the Voice/Song/Pattern is set to
“Song” or “Pattern”)
This section indicates the detailed parameters of the selected category for the current Part and the Voice
assigned to the current Part, or the Global settings. This section introduces what parameters belong to each
of the Parameter Categories. For details about each parameters, refer to the Owner’s Manual of the MOTIF
XS.
Four Indicators showing the Editing Status
One or more of the following four indicators are shown at the right top of the window when you edit a
parameter.
n These indicators, “V,” “M,” “G” and “F” are linked with the small squares at the top right of “1” – “16” boxes and “G” box
in the Mixer section. The “V,” “M” and “G” indicators disappear if you execute the Voice Store, Mixing Store and Global
Store operations, respectively. The “F” indicator and the small squares at the top right of the “G” box in the Mixer section
disappear only if you execute the File Save operation. All the indicators and the small squares disappear if you execute
the File Save operation.
Global Settings
This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following
sub categories.
Micro Tuning
Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed
Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by
selecting “Tuning” on the UTILITY window.
Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator
disappears when you execute Voice Store (page 47).
Indicates that the Multi edits are not stored yet. This indicator disappears when you execute Mixing
Store (page 48).
Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global
Store (page 47).
Indicates that the parameter edits are not saved yet as a file.
V, M, G, F
indicators
MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
MOTIF XS Editor Owner’s Manual
29
Multi Common
This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following
sub categories.
Effect
Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed
Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by
selecting “Reverb” and “Chorus” on the SONG or PATTERN Edit-Common window.
Master FX/EQ (Master Effect/EQ)
Clicking this in the Parameter Category section calls up the parameters related to the Master Effect and
EQ in the Detailed Parameter section. On the MOTIF XS instrument, the Master EQ parameters are the
same as those called up by selecting “Master FX”/”Master EQ” on the SONG or PATTERN Edit-Common
window.
Controller Assign
Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed
Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by
selecting “Ctrl Asgn” on the SONG or PATTERN Edit-Common window.
Part Common
This Parameter category which is called up by selecting any of the “1” – “16” rows in the Mixer section
consists of the following sub categories.
General
Clicking this calls up the GENERAL window in the Parameter Category section. This window lets you edit
the Voice Common parameters such as naming and the Mixing Part parameters such as Pitch,
Portamento, Note/Velocity Limit and Part EQ. In the Part Common General section, both the Mixing Part
parameters (the “M” indicator appears at the top right during editing) and Voice Common parameters
(the “V” indicator appears at the top right during editing) can be edited. To distinguish between them, a
small dot is shown at the immediate left of the parameters.
ARP (Arpeggio)
Clicking this in the Parameter Category section calls up the parameters related to the Arpeggio
assigned to the current Part in the Detailed Parameter section. On the MOTIF XS instrument, these
parameters are the same as those called up by selecting “ARP Main” and “ARP Other” on the SONG or
PATTERN Edit-Part window.
Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which
lets you use the search function for the selecting Types, as with the VOICE LIBRARY window (page 14).
RCV/Control Set (Receive/Control Set)
Clicking this calls up the RCV/CONTROLLER SET ASSIGN window in the Parameter Category section.
This window lets you edit the Receive Switch parameters for the current Part and the Controller Set
Assign parameters for the current Part and the Voice. On the MOTIF XS instrument, these parameters
are the same as those called up by selecting “RcvSwitch” on the SONG or PATTERN Edit-Part window.
LFO (Low Frequency Oscillator)
Clicking this in the Parameter Category section calls up the LFO-related parameters of the Voice
assigned to the current Part in the Detailed Parameter section. This Parameter Category is not available
if the Drum Voice is assigned to the current Part.
Effect
Clicking this in the Parameter Category section calls up the parameters related to the Insertion Effect for
the current Part and System Effect applied to all the Parts in the Detailed Parameter section.
MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
MOTIF XS Editor Owner’s Manual
30
Element or Drum Key
This Parameter Category is called up by selecting any of the “1” – “16” rows in the Mixer section. The
“Element” indication appears when the Normal Voice is assigned to the current Part while the “Drum Key” is
shown when the Drum Voice is assigned. The parameters belonging to this category lets you make the
settings applied to each of the Elements or Drum Keys individually. For details, see the Voice mode section.
AD/mLAN
This Parameter Category is called up by selecting the “AD/mLAN” row in the Mixer section. The parameters
belonging to this category lets you make the settings applied to the AD/mLAN Part in the Song or Pattern
mode. The following sub category is included.
Effect
Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to
the AD/mLAN Part of the Song or Pattern mode in the Detailed Parameter section.
MOTIF XS Editor Window: Bottom section
MOTIF XS Editor Owner’s Manual
31
Bottom section
1 Controller Set status
This section indicates which controller on the MOTIF XS instrument is used as the Control Source of the
Controller Set edited in the RCV/CONTROLLER SET ASSIGN window.
1 Part
Indicates the current Part.
2 Control Source (Controller)
Indicates the six controllers as source of the Controller Set. The abbreviations for the Controllers are as
follows:
3 On/Off status
When a lamp is turned on, a certain function (Destination) is assigned to the corresponding Source
(controller). When a lamp is turned off, no function (Destination) is assigned to the corresponding Source
(controller).
Indication Control Source Indication Control Source
PB Pitch Bend Wheel BC Breath Controller
MW Modulation Wheel AS1 ASSIGN 1 knob
AT After Touch (keyboard) AS2 ASSIGN 2 knob
FC Foot Controller FC2 Foot Controller 2
FS Foot Switch AF1 ASSIGNABLE FUNCTION 1 button
RB Ribbon Controller AF2 ASSIGNABLE FUNCTION 2 button
1
2
4
6
5
37
1
3
2
MOTIF XS Editor Window: Bottom section
MOTIF XS Editor Owner’s Manual
32
2 Quick Setup
From this section, you can instantly call up appropriate panel settings for the Song or Pattern mode of
the MOTIF XS instrument by clicking a convenient preset setup.
n The settings of the MOTIF XS instrument made via the operation here cannot be saved as an Editor file.
MIDI
The following setups are equivalent to those in Quick Setup in the Utility mode of the MOTIF XS.
1 Internal
This setup is useful when you use the sequencer function (Song or Pattern) on the MOTIF XS instrument
alone (without a computer).
2 SEQ to PC
This setup is useful when you transmit the Song or Pattern playback data to a connected computer and
record it to a DAW application software on the computer.
3 REC on PC
This setup is useful when you record your keyboard performance on the MOTIF XS to a DAW application
software on the connected computer.
4 ARP to PC
This setup is useful when you transmit the Arpeggio playback data on the MOTIF XS instrument to a
connected computer and record it to a DAW application software on the computer.
mLAN Audio
The following setups are equivalent to the mLAN Monitor Setup in the Utility mode of the MOTIF XS.
5 St-Alone (stand alone)
This should be selected when you are using the MOTIF XS alone or are not using the DAW software even
with a computer connected to the MOTIF XS via an IEEE1394 cable. When this is selected, the audio
signal of the MOTIF XS (only Parts which are set to “L&R” as the Output Select parameter) will be output
directly via the OUTPUT L/MONO and R jacks normally.
6 With PC
This should be selected when you are using the MOTIF XS as an audio device with the DAW software.
When this is selected, the audio signal of the MOTIF XS (only Parts which are set to “L&R” as the Output
Select parameter) will be output to the DAW software on a computer via an IEEE1394 cable, merged and
mixed with the DAW sound, returned back to the MOTIF XS, then output via the OUTPUT L/MONO and R
jacks. Selecting this allows you to apply VST Effects within the DAW software to the MOTIF XS sound.
7 PC Drct (Direct Monitor)
This should be selected when recording your keyboard performance on the MOTIF XS instrument to the
DAW software on the computer. The audio signal of the MOTIF XS (only Parts which are set to “m1” –“m14”
or “m1&2” – “13&14” as the Output Select parameter) will be sent to DAW, while the audio signal also will
be output directly via the OUTPUT L/MONO and R jacks to monitor the sound without latency. The audio
signal from the DAW software will be output via an IEEE1394 cable. Keep in mind that the Rec Monitor of
the DAW software should be set to “off” in order to prevent “double” sound from occurring.
1
3
2
4
6
7
5
MOTIF XS Editor Window: Bottom section
MOTIF XS Editor Owner’s Manual
33
3 Quick Edit Knobs
This section lets you adjusts various parameters assigned to the Knobs on the front panel of the MOTIF
XS instrument.
1 [TONE 1]/[TONE 2]/[ARP]
Selects the set of functions assigned to the eight knobs. The functions shown above each of the knobs are
same as those printed on the front panel of the MOTIF XS.
2 Knobs 1 – 8
You can click each of the eight knobs to adjust the value of the assigned function.
4 ARP (Arpeggio)
Allows you to change the Arpeggio related setup (on/off status and selecting 1 – 5).
5 MIDI monitor
Tur ns the MIDI monitor function on or off. By turning this MIDI jack icon on, the note on/off
messages transmitted to the MOTIF XS will be shown on the virtual keyboard at the bottom of the
Editor window. Turn the MIDI monitor on if you want to confirm the edit result by playing the
MOTIF XS or the MIDI keyboard connected to the computer.
6 [A.Func] (Assignable Function) button
This button is related to “All AF off,” “AF1 on” and “AF2 on” selected as a value of the XA Control
parameter on the OSCILLATOR/PITCH window of the Normal Voice Element Edit. For details, refer to the
Owner’s Manual of the MOTIF XS.
7 Keyboard
Allows you to audition the edited sound. Note on/off messages corresponding to the keys you click or
drag will be transmitted to the external device via the MIDI port specified in the Editor Setup window
(page 39) as the MIDI OUT parameter.
n The velocity when clicking a key is determined by the setting of the Keyboard Velocity parameter (page 41)
in the Setup window.
n When a Drum Voice is edited, you can initialize the parameter settings of each key by right-clicking on the
virtual keyboard. From the menu called up by right-clicking, selecting “Initialize key” will initialize all the
parameter settings except for the waveform assignment of the currently selected drum key, while selecting
“Initialize key (with Wave)” will initialize the all the parameter settings including the waveform assignment.
12
Basic Operations
MOTIF XS Editor Owner’s Manual
34
Basic Operations
This section covers basic operations of the MOTIF XS Editor.
Naming a Voice
You can assign an original name of your choice to the edited Voice on the VOICE LIBRARY window,
GENERAL window in the Part Common General, and the Store window.
From the VOICE LIBRARY window (page 14), select a User Voice or Mixing Voice then click the selected
Voice so that you can edit the name. After editing the Voice name, pressing the <Enter> key or locating the
cursor to another parameter finalizes the edited name while pressing the <Esc> key aborts it.
From the GENERAL window (below) and Store window (page 47), locate the cursor in the text box of “Voice
Name” at the top of this window, then edit the name in the text box as desired. After editing, pressing the
<Enter> key or locating the cursor to another parameter finalizes the edited name.
Searching for a Voice/Arpeggio Type
You can search for the desired Voice and Arpeggio type on the VOICE LIBRARY window (page 14) and ARP
LIBRARY window just by inputting a keyword in the text box at the bottom of these windows respectively.
Likewise, the Search function is available on the Import window (page 37).
Inputting a numerical value
When double clicking a value box such as that shown above, the value box can be edited and you can input
a numerical value directly by using numeric keys. After editing, pressing the <Enter> key or locating the
cursor to another parameter finalizes the value while pressing the <Esc> key aborts it. You can edit the value
also by using the Cursor key or <Page Up>/<Page Down> key after clicking this box.
In Windows, to reset the value to its default, simultaneously hold down the <Ctrl> key and click on the value
box. On the Macintosh, to reset the value to its default, simultaneously hold down the Command key and
click on the value box.
n For certain parameters, the value can be edited only by using the mouse and cannot be input directly by using the
numeric keys.
Basic Operations
MOTIF XS Editor Owner’s Manual
35
Selecting a value
Clicking inside the value box like such as that shown above calls up the list box, from which you can select
the desired value. You can also select the value also by clicking the arrow at right end of this box.
Using a knob
Dragging or clicking the knob such as that shown above changes the value of the corresponding parameter.
After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you
want to make fine adjustments to the value, drag the mouse while holding the <Shift> key.
The specific operation of the knob is determined by the settings of the Knob Guide parameter and Knob
Mouse Control parameter in the Setup window (page 39). In Windows, to reset the value to its default,
simultaneously hold down the <Ctrl> key and click on the knob. On the Macintosh, to reset the value to its
default, simultaneously hold down the Command key and click on the knob.
Using a slider
Dragging or clicking the slider such as that shown above changes the value of the corresponding parameter.
After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you
want to make fine adjustments to the value, drag the mouse while holding the <Shift> key.
The specific operation of the slider is determined by the setting of the Slider Mouse Control parameter in the
Setup window (page 39). In Windows, to reset the value to its default, simultaneously hold down the <Ctrl>
key and click on the slider. On the Macintosh, to reset the value to its default, simultaneously hold down the
Command key and click on the slider.
Using a graph
Dragging one of the boxes in the graph (as shown above) changes the value of the corresponding parameter.
In Windows, simultaneously hold down the <Ctrl> key and click on the box to reset the corresponding value
to the default setting. To reset the entire graph and its values to the default setting, simultaneously hold down
the <Ctrl> key and click on any section in the graph (other than one of the boxes) to reset the entire graph
and its values to the default setting. On the Macintosh, simultaneously hold down the Command key and
click on the box to reset the corresponding value to the default setting. To reset the entire graph and its
values to the default setting, simultaneously hold down the Command key and click on any section in the
graph (other than one of the boxes) to reset the entire graph and its values to the default setting.
Menu: [File] menu
MOTIF XS Editor Owner’s Manual
36
Menu
[File] menu
New
Creates and opens a new file containing the default Mixing setup and Voice data.
Open...
Opens an already saved file of the MOTIF XS Editor. The following file types can be selected and opened.
MOTIF XS Editor (.X0E)
MOTIF-RACK XS Editor (.X1E)
MO6/MO8 Multi Part Editor file (.M4E)
MOTIF-RACK ES Multi Part Editor (.M3E)
MOTIF ES6/7/8 Multi Part Editor (.M4E)
MOTIF XS All Files (.X0A)
CAUTION
Unlike files of other applications such as word processors, only a single file can be opened and edited on the MOTIF XS Editor. Before
opening a new file, make sure to save the edited settings as a file to avoid losing data.
Save
Saves the current settings by overwriting the current file.
Save As...
Saves the current settings as a MOTIF XS Editor file (.X0E) under a new or different name.
Menu: [File] menu
MOTIF XS Editor Owner’s Manual
37
Import
Imports the Voice data (a specific Voice in a specific folder or all Voices in a specific folder) from a different
file to the current file.
Click the File Select button (3), select a file including your desired Voice(s) so that the folders in the selected
file are listed as the Source Voice list (8), select a Voice or Voices or a folder or folders in the list (8), select
a destination location in the Destination Voice list (9) of the current file, then click [Import] (5) to execute the
Import operation.
The following file types can be selected.
MOTIF XS Editor (.X0E)
MOTIF-RACK XS Editor (.X1E)
MO6/MO8 Voice Editor and MOTIF ES6/7/8 Voice Editor (.W7E)
MO6/MO8 Multi Part Editor (.M4E)
MOTIF-RACK ES Multi Part Editor (.M3E)
MOTIF ES6/7/8 Multi Part Editor (.M4E, .M2E)
MOTIF-RACK ES Voice Editor files(.W9E)
MOTIF XS ALL (.X0A)
MOTIF XS ALL Voice (.X0V)
1 [X] (Close) button
Click this to close this window without importing.
2 File name (Indication only)
Indicates the currently selected file.
3 File selection button
Click this to open the dialog for file selection.
4 [Category]/[Bank] checkboxes
Click either of these boxes to determine whether the Voices in the Source Voice list (8) are divided into
Categories or Banks.
1
2
3
4
56
7
6
9
7
8
)
Menu: [File] menu
MOTIF XS Editor Owner’s Manual
38
5 [Import] button
Click this to actually import the Voice(s) selected in the Source Voice list (8) to the specified location in
the Destination Voice list (9).
n You can also import Voice data without the use of this button by dragging the desired Voice or folder from the
Source Voice list then dropping it to the Destination Voice list.
n A Normal Voice cannot be imported to the User Drum Voice Bank. Likewise, a Drum Voice cannot be
imported to the User Normal Voice Bank. No Voices can be imported to the Preset Voice Bank.
6 [+]/[–] buttons
Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to
close all folders.
7 Folder button (Bank or Category)
Double click here to open or close the folder.
8 Source Voice list
Indicates the Voices or folders of the selected file to be imported.
By right-clicking this section and selecting a menu, you can perform the following functions.
Opening/Closing all the folders
Determining whether the Voices listed here are divided into Category folders or Bank folders
9 Destination Voice list
Indicates the Voices or folders currently edited on the MOTIF XS Editor.
n By right-clicking this section and selecting a menu, you can open or close all the folders.
) Search box
You can search for your desired Voice from the Source Voice list (8) by inputting a keyword here.
Menu: [File] menu
MOTIF XS Editor Owner’s Manual
39
Setup
Determines the basic setup of the MOTIF XS Editor. After setting necessary parameters, click [OK] to
actually apply the settings to the MOTIF XS Editor.
1 [X] (Close) button
Click this to close this window without applying the settings. This button is the same as the [Cancel]
button (#).
2 [mLAN/1394]/[USB] checkboxes
Select which port (USB or mLAN) is used for communication between the MOTIF XS and computer.
3 [Detail] button
When “USB” is selected at the [mLAN/1394]/[USB] checkboxes (2), you can make detailed settings for
the Input Port and Output Port by setting this button to “On.” This setting is necessary if the Port name is
changed on a computer.
4 MIDI
Set the MIDI Port for communication between the MOTIF XS Editor and the MOTIF XS instrument. When
“USB” is selected at the [mLAN/1394]/[USB] checkboxes (2) and the [Detail] button (3) is set to “Off,”
select a value such as “Yamaha USB 0-1” or “MOTIF XS6-1(2,3,4)” at the top left column. When “USB” is
selected and the [Detail] button (3) is set to “On,” select Port 4 for the MOTIF XS in the MIDI In setting
then select Port 1 and Port 4 for the MOTIF XS in the MIDI Out settings. When “mLAN/1394” is selected
at the [mLAN/1394]/[USB] checkboxes (2), select the MIDI Port of the MOTIF XS at the MIDI column
and select the model name such as “MOTIF XS” at the mLAN Device column.
n When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the previously
used Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the host
application.
n When the MOTIF XS is connected to a computer via an IEEE1394 cable and the mLAN/1394 setting above is
turned on, the MIDI Port can handle only note on/off messages. The mLAN Device setting is necessary for
transferring MIDI messages other than note on/off.
n Keep in mind that setup on the host application (Studio Manager) is necessary before making settings here.
When starting Studio Manager as a stand-alone application, see page 5. When starting Studio Manager as a
plug-in of the DAW application, refer to the manual of the DAW application.
n Make sure to set the MIDI IN/OUT parameter to “USB” in the MIDI display of the Utility mode on the MOTIF
XS instrument when “USB” is selected at the [mLAN/1394]/[USB] checkboxes. Likewise, make sure to set the
MIDI IN/OUT parameter to “mLAN” in the Utility mode when “mLAN/1394” is selected.
1
4
5
6
7
2
3
8
9
)
!
@
#
Menu: [File] menu
MOTIF XS Editor Owner’s Manual
40
5 Device No.
Set the Device number to the same as the value specified in the MIDI display of the Utility mode on the
MOTIF XS itself. When the Device number on the MOTIF XS is set to “All,” set the Device No. here to “1.”
6 Auto Sync Setting
This section lets you set how the data synchronization between the MOTIF XS Editor and the MOTIF XS
instrument is executed when “OFFLINE” is changed to “ONLINE.” Actual data synchronization is
executed from the Auto Sync window (page 51) called up automatically under certain circumstances
such as clicking the [OFFLINE] button, starting the MOTIF XS Editor and opening a new file on the
Editor.
Global
Determines whether or not the Global data (see page 4) is synchronized and which data (MOTIF XS
Editor or MOTIF XS itself) is synchronized with the other.
Current
Determines whether or not the Current data (see page 4) is synchronized and which data (MOTIF XS
Editor or MOTIF XS itself) is synchronized with the other.
Voice
Determines whether or not the Voice data (see page 4) is synchronized and which data (MOTIF XS
Editor or MOTIF XS itself) is synchronized with the other.
Auto Start
When this is set to “On” and one of the following operations is executed, data synchronization will be
started automatically as soon as the Auto Sync window is opened.
When clicking “OFFLINE” after setting the MIDI IN/OUT parameter correctly in the Utility mode on
the MOTIF XS, setting the MIDI Ports correctly on the computer, and making a proper connection.
When the connection between the MOTIF XS and a computer are corrected after appropriately
correcting the setup of the MOTIF XS and the computer.
When the settings on the MOTIF XS instrument and the computer are corrected after
appropriately reconnecting the devices.
n The parameters set here apply also to the parameters having the same names in the Auto Sync window.
CAUTION
When the Auto Start parameter is set to “On, data synchronization is started automatically under certain circumstances
(page 51) such as clicking the [OFFLINE] button, starting the Editor and opening a new file on the Editor. Keep in mind that
this will cause unexpected data loss on the MOTIF XS Editor or the MOTIF XS itself, since new data automatically overwrites
old data upon data synchronization. Make sure to save your important data before using the MOTIF XS Editor.
7 Knob Guide
Determines whether or not the Knob Guide (knob editing area) appears when adjusting a knob. Setting
this to On conveniently enlarges the knob editing area (as shown), making it much easier to edit a knob’s
parameter.
Knob Guide: On Knob Guide: Off
Menu: [File] menu
MOTIF XS Editor Owner’s Manual
41
8 Knob Mouse Control
Determines how the knob illustrated at right responds to
your mouse control.
Circular
When this is selected, you can jump to a specific value by clicking at a point within the Knob editing
area. You can edit the value also by dragging the mouse in a circular direction—in much the same way
as turning an actual knob.
Relative Circular
When this is selected, you can edit the value by dragging the mouse in a circular direction—in much the
same way as turning an actual knob.
Linear
When this is selected, you can edit the value by dragging any point in the knob editing area (the mouse
pointer disappears) and moving it vertically or horizontally—in much the same way as operating a slider.
9 Slider Mouse Control
Determines how the Slider illustrated at right responds to your
mouse control.
Jump
When this is selected, clicking any location in the slider jumps the slider pointer to that location.
Touch
When this is selected, you can edit the value by dragging and moving the slider pointer horizontally—in
much the same way as operating an actual slider. Clicking at any location in the slider (other than the
orange pointers) does not affect the slider.
Ramp
When this is selected, clicking at any location in the slider (other than the orange pointers) moves the
nearest pointer to that location. Dragging any point in the slider moves the slider pointer accordingly.
Relative
When this is selected, you can edit the value by dragging any point (the mouse pointer disappears) and
moving it horizontally.
) Keyboard Velocity
Determines the Velocity value generated when clicking any note on the virtual keyboard at the bottom of
the Editor window. When “Fix” is turned on, clicking any key generates the same velocity value which
can be specified in the box at right of “Fix.” When “Free” is turned on, the generated Velocity value
differs depending on the click location. The lower on the key graphic you click, the higher the Velocity.
Menu: [File] menu
MOTIF XS Editor Owner’s Manual
42
! Inc/Dec Action
Determines how the triangular buttons ([]/[]/[L]/[M]) located at the parameter boxes as illustrated
below work.
Inc/Inc:
When this is selected, clicking the [] button increases the value by 1 while clicking the [L] button
moves the cursor downward by one item.
Inc/Dec:
When this is selected, clicking the [] button increases the value by 1 while clicking the [L] button
moves the cursor upward by one item.
Dec/Inc:
When this is selected, clicking the [] button decreases the value by 1 while clicking the [L] button
moves the cursor downward by one item.
Dec/Dec:
When this is selected, clicking the [] button decreases the value by 1 while clicking the [L] button
moves the cursor upward by one item.
@ [OK] button
Click this to actually apply the settings to the MOTIF XS Editor and close the Setup window.
# [Cancel] button
Click this to close the Setup window without applying the settings to the MOTIF XS Editor.
Menu: [File] menu
MOTIF XS Editor Owner’s Manual
43
Hardware Utility
From the HARDWARE UTILITY window called up by selecting this menu, you can make the settings related
to the parameters in the Utility mode of the MOTIF XS. Editing the parameter on this window will affect the
parameter having the same name of the MOTIF XS instrument. After making the settings, click [Store] at the
bottom of this window to store the settings as Global data.
MOTIF XS Editor
(parameters on the above window)
MOTIF XS instrument
1 Tone Note Shift [UTILITY] [F1] General [SF1] Play
Tune [UTILITY] [F1] General [SF1] Play
2 Auto Load Setup Power On Mode [UTILITY] [F1] General [SF4] AutoLoad
3 MIDI Channel Basic Receive Ch [UTILITY] [F5] Control [SF2] MIDI
Basic Transmit Ch [UTILITY] [F5] Control [SF2] MIDI
4 MIDI Sync MIDI Sync [UTILITY] [F5] Control [SF2] MIDI
Clock Out [UTILITY] [F5] Control [SF2] MIDI
5 MIDI Switch Bank Select [UTILITY] [F5] Control [SF2] MIDI
Program Change [UTILITY] [F5] Control [SF2] MIDI
Local Control [UTILITY] [F5] Control [SF2] MIDI
6 MIDI Other Controller Reset [UTILITY] [F5] Control [SF2] MIDI
1
5
6
4
2
3
Menu: [Edit] menu
MOTIF XS Editor Owner’s Manual
44
[Edit] menu
Undo
Cancels the changes you made in your most recent editing. [Undo] menu will be gray and cannot be
selected depending on the most recent edited parameter.
Redo
Redo is available only after using Undo, and lets you restore the changes you made before undoing them.
Copy
Copies the selected items such as characters of the Voice name in the text box, Voice(s) in the VOICE
LIBRARY window and entire Part setup to the clipboard.
Paste
Pastes the Voice(s), entire Part setup, and characters from the clipboard to the specified location.
Initialize Current Voice (in the Voice mode)/Initialize Current Part Voice (in the Song or
Pattern mode)
In the Voice mode, select [Initialize Current Voice] under [Edit] to call up the Initialize Current Voice window
from which you can initialize the current Voice by clicking [Start]. In the Song or Pattern mode, select
[Initialize Current Part Voice] under [Edit] to call up the Initialize Current Part Voice window from which you
can initialize the Voice assigned to the current Part by clicking [Start].
When a Normal Voice is edited:
Voice mode Song or Pattern mode
1
5
6
4
2
3
Menu: [Edit] menu
MOTIF XS Editor Owner’s Manual
45
When a Drum Voice is edited:
1 [X] (Close) button
Click this to close the window without executing Initialization.
2 [All]/[Clear] button
Clicking [All] turns all the checkboxes in this window on while clicking [Clear] turns them off.
3 [Common] checkbox
When this is turned on, clicking [Start] initializes the settings of all the Common parameters (Voice
Common parameters when the Editor is set to the Voice mode or Part Common parameters when the
Editor is set to the Song or Pattern mode).
4 with Wave Assignment
When this is turned on, clicking [Start] initializes the Waveform assignment for all Elements of the current
Voice.
5 Element [1] – [8] or Drum Key C0 – C6 checkboxes
When a Normal Voice is edited, clicking [Start] initializes the settings of all parameters for the Elements
which are turned on here. When a Drum Voice is edited, clicking [Start] initializes the settings of all
parameters for the drum keys which are turned on here.
6 [Start] button
After the setup is completed, click [Start] to initialize the parameter settings and close the window.
1
5
6
4
2
3
Menu: [Edit] menu
MOTIF XS Editor Owner’s Manual
46
Initialize Current Mixing (only in the Song or Pattern mode)
Select this menu to call up the Initialize Current Part Voice window, set the parameters as necessary, then
click [Start] to initialize the Voice data assigned to the current Part.
1 [X] (Close) button
Click this to close the window without executing Initialization.
2 [All]/[Clear] button
Clicking [All] turns all the check boxes in this window on while clicking [Clear] turns them off.
3 [Multi Common] checkbox
When this is turned on, clicking [Start] initializes the settings of all the Multi Common parameters.
4 Initialize Template
The following templates for initializing are available.
Normal:
When this is selected, clicking [Start] initializes the Editor setup to the normal default settings.
GM:
When this is selected, clicking [Start] initializes the Editor Setup so that the MOTIF XS can be used as a
GM tone generator.
Contemporary R&B – TurkishPop:
When one of these templates is selected, clicking [Start] initializes the Editor Setup so that the MOTIF XS
can be used as a tone generator which matches the name of the selected template.
5 Output Template
Sets the Output jack for audio signal of all the Parts to “L&R” or “mLAN.”
6 Part [1] – [16] checkboxes
Clicking [Start] initializes the settings of all parameters for the Parts which are turned on here.
7 [AD]/[mLAN] checkbox
When this is turned on, clicking [Start] initializes the settings of all parameters for the AD/mLAN Part.
8 [Start] button
After setup is completed, click [Start] to initialize the Mixing setup and close the window.
1
6
8
4 5
2
3
7
Menu: [Edit] menu
MOTIF XS Editor Owner’s Manual
47
Store Global
Simply selecting this menu will store the Global settings. The Global settings will be stored only to the internal
memory of the MOTIF XS instrument.
Store Voice
From the window selected via this menu, you can store the edited Voice. The current Voice is stored in the
Voice mode while the Voice assigned to the current Part is stored in the Song or Pattern mode. Select the
desired Bank folder (5), select the number of the destination Voice (6), input the Voice name (2), then click
the [Store] button to store the Voice as a User Voice or Mixing Voice (available only in the Song or Pattern
mode).
1 [X] (Close) button
Click this to close this window without executing the Store operation.
2 Voice Name
Enter an original name for the Voice to be stored.
3 [Store] button
Click this to store the edited Voice to the specified Bank and number.
CAUTION
Like other parameters, the Voice data is synchronized with the MOTIF XS instrument when ONLINE (page 12) is indicated.
This means that clicking [Store] in this window stores the edited Voice to the corresponding Bank in the internal memory of
the MOTIF XS instrument. Be careful not to overwrite any important data.
4 [+]/[–] buttons
Pressing the [+] button opens all the Bank folders, while pressing the [–] button closes them.
1
4
5
6
23
Menu: [Edit] menu
MOTIF XS Editor Owner’s Manual
48
5 Bank folder
This section indicates the following Banks to which you can store the edited Voice.
• Normal User 1
• Normal User 2
• Normal User 3
• Drum User
• Mixing
Clicking on each Bank folder opens it and all the Voices stored in the Bank appear as illustrated above
(from the left illustration to the right one). When clicking the Bank folder again, it closes as illustrated
above (from the right illustration to the left one).
Note that the indicated Bank differs depending on the current mode and current Voice type. The Mixing
Bank is shown only in the Song or Pattern mode. The Drum User Bank is shown only when the Drum
Voice is selected (in the Voice mode) or the Drum Voice is assigned to the current Part (in the Song or
Pattern mode). Likewise, the Normal User Bank is shown only when the Normal Voice is selected (in the
Voice mode) or the Normal Voice is assigned to the current Part (in the Song or Pattern mode).
6 Voices
The Voices in the selected Bank are listed. Before clicking the [Store] button, you need to select the
number of the destination Voice here. Right clicking on this section calls up the menus “All Open” and
“All Close,” letting you open or close all the Bank folders.
Store Mixing (only in the Song or Pattern mode)
Simply selecting this menu will store the Mixing settings in the Song or Pattern mode. The Mixing settings will
be stored to the internal memory (overwritten to the Mixing setup of the currently selected Song or Pattern) of
the MOTIF XS instrument.
Voice Compare (only in the Voice mode)
This menu lets you switch between the just-edited Voice and its original, unedited condition, allowing you to
hear how your edits affect the sound. Select “Voice Compare” to enter the Voice Compare mode. In this
mode, you can hear the sound of the original Voice and none of the parameters in the window can be edited.
Select “Voice Compare” again to return to the original status.
n The status of the MOTIF XS instrument is maintained even if you enable the Voice Compare mode on the MOTIF XS
Editor.
Mixing Compare (only in the Song or Pattern mode)
This menu lets you switch between the just-edited Mixing and its original, unedited condition, allowing you to
hear how your edits affect the sound. Select “Mixing Compare” to enter the Mixing Compare mode. In this
mode, you can hear the sound of the original Mixing setup and none of the parameters in the window can be
edited. Select “Mixing Compare” again to return to the original status.
n The status of the MOTIF XS instrument is maintained even if you enable the Mixing Compare mode on the MOTIF XS
Editor.
Menu: [Bulk] menu
MOTIF XS Editor Owner’s Manual
49
[Bulk] menu
Data Sync
Select this menu to call up the Initialize Data Sync window, set the parameters as necessary, then click
[Start] to transmit the specified data from/to the MOTIF XS Editor to/from the MOTIF XS instrument.
1 [X] (Close) button
Click this to close this window without executing Data Sync.
2 [Transmit]/[Receive] checkboxes
Determines whether the MOTIF XS Editor transmits data to the MOTIF XS or receives data from the
MOTIF XS.
[Transmit] checkbox:
When this is checked, clicking [Start] button transmits data from the Editor to the instrument.
[Receive] checkbox:
When this is checked, clicking [Start] button transmits data from the instrument to the Editor.
3 Data type to be transmitted/received
Here, you can set which data type is to be transmitted or received. Clicking the [All] button turns all the
data types on while clicking the [Clear] button turns all the data types off.
Current
Turn this on then click the [Start] button to transmit or receive the Current settings.
Global
Turn this on then click the [Start] button to transmit or receive the Global settings.
Preset (Favorites)
Turn this on then click the [Start] button to transmit or receive the Favorites-related settings of the Preset
Voice(s).
Normal User 1 – 3
Turn this on then click the [Start] button to transmit or receive the data of the Normal User Voice Bank 1,
2, and 3 respectively.
Drum User
Turn this on then click the [Start] button to transmit or receive the data of the Drum User Voice Bank.
1
3
5 6
2
4
Menu: [Help] menu
MOTIF XS Editor Owner’s Manual
50
4 Progress Bar
Shows how much of the data has been transmitted.
5 [Start] button
After setup is completed, click the [Start] button to actually execute data transmission.
6 [Stop] button
This button is available only when data transmission is being executed and allows you to cancel the
transmission.
[Help] menu
Manual
Selecting this menu calls up this manual in PDF format.
About
Selecting this menu calls up information such as the version number of the MOTIF XS Editor.
Menu: Auto Sync window
MOTIF XS Editor Owner’s Manual
51
Auto Sync window
This window is used for changing the status of the Editor from “OFFLINE” to “ONLINE.” While editing a parameter
on the Editor affects the same parameter on the MOTIF XS instrument and vice versa in the Online status, you can
disable the “mirroring” of parameter changes between the devices by switching to Offline status. The Auto Sync
window can be called up by clicking “OFFLINE” on the Editor window when the Editor is in the Offline status. The
Auto Sync window can also be called up automatically (without clicking “OFFLINE”) under the following
circumstances:
When opening a file.
When creating a new file by selecting “New” under the File menu.
When changing the mode on the Editor in the Online status of the Editor.
When changing the mode on the MOTIF XS instrument in the Online status of the Editor.
When the connection between the MOTIF XS and a computer are corrected after appropriately correcting the
setup of the MOTIF XS and the computer.
When the settings on the MOTIF XS instrument and the computer are corrected after appropriately reconnecting
the devices.
n If the Auto Start parameter is set to “On” in the Auto Sync window, data synchronization may be started automatically as
soon as the Auto Sync window is opened in certain conditions. For details, see page 40.
On the Auto Sync window, set the Data Port properly then click [Start] button to execute data synchronization. As
soon as the data synchronization is completed, the Auto Sync window is closed then the OFFLINE indication
changes to ONLINE automatically.
1 [X] (Close) button
Click this to close this window without executing data synchronization.
2 [mLAN1394]/[USB] checkboxes
3 [Detail] button
4 Port
5 Device No.
6 Auto Sync Setting
These parameters are same as in the Setup window. See page 39.
7 Progress Bar
8 [Start] button
9 [Stop] button
These parameters are same as in the Data Sync window. See page 50.
1
5
6
7
8
4
2
3
9
Troubleshooting
MOTIF XS Editor Owner’s Manual
52
Troubleshooting
If you encounter problems such as no sound output or abnormal behavior, verify the connections before
checking the following.
Sound does not change when using the knobs or sliders.
Is “ONLINE” indicated on the Editor window?
Is the lamp at left of “ONLINE” indicator turned on?
If it is turned off, the settings related to communication between the MOTIF XS and a computer
may be wrong. Check the MIDI Port setting (page 39) on the MOTIF XS Editor and Studio
Manager, the MIDI IN/OUT parameter setting in the MIDI display of the Utility mode on the MOTIF
XS instrument, or the cable connection between the MOTIF XS and the computer.
Check the MIDI Port setting and Device No. setting. (page 40)
Bulk data is not transmitted/received successfully.
Check the same points as above such as “ONLINE” indication and MIDI Port settings.
The appropriate Port is not shown in the Setup window.
The MIDI Port in the Setup window can be selected from the Ports specified in the host
application. Check the MIDI Port settings in the host application.
When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the
previously used Port cannot be found or some Ports are not set properly. Check the MIDI Port
settings in the host application.
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
©2007 Yamaha Corporation
805MW-B0

Documenttranscriptie

MOTIF XS Editor Owner’s Manual Contents What is the MOTIF XS Editor?.................................................2 Studio Manager ........................................................................2 Studio Connections .................................................................2 About Open Plug-in Technology .............................................3 Data Structure of the MOTIF XS Editor...................................4 Starting the MOTIF XS Editor ..................................................5 An Example of MOTIF XS Editor in Use .................................6 MOTIF XS Editor Window.......................................................12 Basic Operations....................................................................34 Menu ........................................................................................36 Troubleshooting .....................................................................52 • Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. • The software and this owner’s manual are exclusive copyrights of Yamaha Corporation. • Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. • Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. • The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer. • The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective companies. • Click on the red-colored text to jump to the related item in this manual. This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operations. If you are not, please refer to the owner’s manual which came with your Windows/Macintosh software before using the MOTIF XS Editor. For information about hardware requirements, the interconnection of devices and the installation of the MOTIF XS Editor software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective MIDI device. © 2008 Yamaha Corporation. All rights reserved. MOTIF XS Editor Owner’s Manual 1 What is the MOTIF XS Editor? What is the MOTIF XS Editor? MOTIF XS Editor is a convenient tool which lets you edit and save the various parameters of your MOTIF XS tone generator. These include Voice and Mixing parameters (edited in the Voice or Mixing mode of the MOTIF XS) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-understand graphical interface, you can edit various parameters of the MOTIF XS right from your computer—using the mouse to adjust the virtual knobs, sliders, and buttons and entering values from the computer keyboard. Finally, all the changes you have made can be saved to your computer or transmitted to the MOTIF XS instrument. You can use this MOTIF XS Editor as a plug-in for the software below • Studio Manager • DAW application software compatible with Studio Connections Studio Manager Studio Manager V2 is a cross-platform application that enables you to start multiple Editors for controlling Yamaha hardware products remotely, and to save multiple Editor settings. You can run Studio Manager as a stand-alone application, or as a plug-in within DAW applications compatible with Studio Connections such as Cubase 4 or Cubase AI 4. For more information, refer to the Studio Manager PDF manual. Studio Connections Studio Connections is a joint project begun by Steinberg and Yamaha. Music production systems now increasingly rely on both software and hardware, and there is a pressing need for closer integration between the two. Studio Connections provides a comprehensive and seamless music production environment—making the use of hardware and software both easier and much more efficient. The following functions are available in Studio Connections. Recall With the Recall function, all settings in each Editor can be saved within Studio Manager, and then called up again when needed. This enables you to recall all the settings of multiple devices from Studio Manager and control the entire system easily, instantly and automatically. When executing the Recall function in the Studio Manager, the parameter settings of either device (MOTIF XS or DAW software on a computer) are synchronized with the other. You can determine which device (MOTIF XS or DAW software) is regarded as the master of the parameter settings by setting the Auto Sync Setting (page 40). Recall is especially convenient when used with a DAW application compatible with Studio Connections. This lets you save the Editor data directly to the project file of the DAW letting you recall all necessary hardware settings automatically by simply opening the project file. MOTIF XS Editor Owner’s Manual 2 About Open Plug-in Technology Audio Integration Plug-in software such as software synthesizers and software samplers are exceptionally convenient in that they let you easily change the various settings and parameters within the host application. However, control over hardware is not so easy—with the need for various setups such as audio connections, driver settings and MIDI port connections. By using a Studio Connections-compatible DAW software, you can control the external hardware synthesizer within the application, without the need to set up complex connections within a DAW software application— just as easily and conveniently as you would with plug-in software. The Audio Integration function makes all this possible. For details about Recall and Audio Integration, visit our web site at: http://www.studioconnections.org/ About Open Plug-in Technology Open Plug-in Technology (OPT) is a software format that enables you to control MIDI devices from a music DAW application software. For example, this allows you to start up and operate various parts of your music system, such as voice editors of the synthesizer and mixing control editors—directly from an OPT-compatible software, without having to use each separately. OPT also makes it unnecessary to set MIDI drivers for each application, streamlining your music production system and making all operations more convenient and seamless. In addition to the original OPT, Open Plug-in Technology Version 2 (OPT 2), designed for Studio Connections, is also available. The host application Studio Manager supports OPT 2. About the OPT 2 Overview OPT 2 is a plug-in format that enhances OPT Level 1 (Panels) and adds some convenient functions for Studio Connections. Editor Host Application Studio Manager OPT2 Editor Plug-in software compatible with OPT 2 is indirectly connected to the DAW application compatible with Studio Connection, via the Studio Manager. Editor MOTIF XS Editor Owner’s Manual 3 Data Structure of the MOTIF XS Editor Data Structure of the MOTIF XS Editor The MOTIF XS Editor lets you create the following data and save them as a single file (extension: X0E). • • • • Current Global data (latest status of edited global parameters) Current data in the Voice mode (latest status of edited Voice) Current data in the Song/Pattern mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices) User Voice data (consisting of three Normal Voice Banks and one Drum Voice Bank) Current settings includes the latest settings of the Common and Element parameters for the Voice last assigned to each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The MOTIF XS Editor lets you edit parameters (including Element parameters) of the Voice assigned to each Part and save the latest edit status as a file without storing it as a User Voice or a Mixing Voice. This means that you can easily recall the latest status of the previous edit simply by opening the file. n The MOTIF XS Editor handles the Global data which includes some of the parameters shown on the “G” row in the Mixer section and all the parameters in the Global Settings of the Parameter Category section (pages 20 and 23). The diagram illustrated below indicates the structure of the data created via the MOTIF XS Editor, the structure of the data stored in the internal memory of the MOTIF XS instrument and the relationship between those two types of data. MOTIF XS Editor (computer) Data sync*1 Current Global data Store Voice*2 (page 47) Data sync*1 Current data in the Voice mode User Voice data Current data in the Song or Pattern mode • Normal User 1 (128 Voices) • Normal User 2 (128 Voices) • Normal User 3 (128 Voices) • Drum User (32 Voices) • Multi Common data Editor file (Extension: .X0E) Store Voice*2 (page 47) Part Voice data (16 Voices) Store Voice*2 (page 47) Mixing Voice data (16 Voices) MOTIF XS instrument Store Global*3 (page 47) Current Global data Current data in the Voice mode Current data in the Song or Pattern mode Global data Store Voice*2 (page 47) User Voice data Store Voice*2 (page 47) • Normal User 1 (128 Voices) • Normal User 2 (128 Voices) • Normal User 3 (128 Voices) • Drum User (32 Voices) Store Mixing*3 (page 48) Mixing data • Multi Common data Data sync*1 Part Voice data • Multi Common data (16 Voices) Store Voice*2 (page 47) Mixing Voice data (16 Voices) *1 When the MOTIF XS instrument is connected to the computer properly with the ONLINE status, editing a parameter on the MOTIF XS Editor affects the same parameter on the MOTIF XS itself, and vice versa. *2 The Store Voice operation on the Editor will store the Voice data to the memory of the MOTIF XS instrument as well as the memory of the Editor. *3 The Store Global operation and Store Mixing operation will store the data only to the memory of the MOTIF XS instrument. MOTIF XS Editor Owner’s Manual 4 Starting the MOTIF XS Editor Starting the MOTIF XS Editor Install the driver (USB-MIDI driver or AI driver), Studio Manager and MOTIF XS Editor by following the respective Installation Guides, then install the host application such as Cubase if necessary. After making the required connection and setting the MIDI IN/OUT parameter to “USB” or “mLAN” in the Utility mode, follow the instructions below to start the MOTIF XS Editor. n For details about connection between the MOTIF XS and a computer, refer to the Owner’s Manual of the MOTIF XS. 1. Start the Studio Manager. Studio Manager can be started as a plug-in within a Studio Connections-compatible DAW software, or can be started as a stand-alone application. 2. Set the MIDI Ports. When starting Studio Manager as a stand-alone application: Set the MIDI Ports by calling up the MIDI Ports window via [File] → [Setup] ([SM2] → [Preference] for Mac) → [MIDI Settings]. When the connection is done via a USB cable, enter the checkmarks to the boxes of Por ts 1 and 4 for the MOTIF XS in both the Input Por ts and the Output Ports, as illustrated below. When connection is made via the IEEE1394 cable, enter checkmarks to the boxes of the Por ts corresponding to the mLAN MIDI In and the mLAN MIDI Out of the MOTIF XS, in both the Input Por ts and the Output Ports. When starting Studio Manager as a plug-in: Set the MIDI Ports on the DAW application. For details, refer to the manual of your DAW application. When connecting the MOTIF XS to a computer via a USB cable, the MIDI Ports are automatically set simply by starting Studio Manager from Cubase 4 or Cubase AI 4. This is also true when connecting the MOTIF XS to a computer via an IEEE1394 cable and installing “Extensions for Steinberg DAW” to the computer. 3. Start the MOTIF XS Editor from the window of the Studio Manager. For details, refer to the Installation Guide and the PDF manual of the Studio Manager. When using Studio Manager as a plug-in with the Audio Integration features of Studio Connections (within a compatible DAW), you can start the MOTIF XS Editor just as you would any other software synthesizer. For details, visit the following web site. http://www.studioconnections.org/ MOTIF XS Editor Owner’s Manual 5 An Example of MOTIF XS Editor in Use An Example of MOTIF XS Editor in Use There is no single way to use the many components in the MOTIF XS Editor. Your editing needs and preferences may differ; however, the following example gives you a simple step-by-step guide in how to use the MOTIF XS Editor. As an example, this section explains how to edit a Voice in the Voice mode, edit a Mixing program in the Song mode, then store the edited data to the memory of the MOTIF XS instrument and save the final results of your editing to a file. n If the [Song] or [Pattern] indication (at the top left of the display) is on, perform the instructions below from step 1. If the [Voice] indication is on, perform the instructions below from step 2. 1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left of the display). If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you should proceed to step 3. 2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE] indication is set to [OFFLINE]. 3. On the Auto Sync window, set communication-related parameters such as Input Port, Output Port and Device Number in the Data Port section, then set the direction of Data Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section. When you want to use the settings on the MOTIF XS itself as starting data for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to the computer. To use the settings on the MOTIF XS Editor as starting data, set both Global, Current and Voice to the opposite, so that the arrow indicates data flow from the computer to the keyboard. For details, see page 39. CAUTION Keep in mind that when you set Global, Current and User Voice to On, enable data sync from the computer to the MOTIF XS (instrument), and then click the [Start] button at the bottom, this operation transmits these types of data currently on the Editor to the MOTIF XS itself, automatically overwriting and erasing all the corresponding data already existing on memory of the MOTIF XS instrument. When you want to use the settings on the MOTIF XS itself as starting data for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to the computer. MOTIF XS Editor Owner’s Manual 6 An Example of MOTIF XS Editor in Use CAUTION Regarding the data transfer for synchronization, the setting here takes precedence over that specified in Studio Manager. Make sure to set the desired data transfer direction, regardless of the setting on the Studio Manager, in order to avoid data loss. 4. From the Auto Sync window, click [Start] at the bottom. The data synchronization will be started if the Port settings are correct. As soon as data synchronization is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE indication automatically. In this ONLINE status, editing a parameter on the MOTIF XS Editor affects the same parameter on the MOTIF XS itself, and vice versa. 5. Edit the Voice in the Voice mode. 5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the VOICE LIBRARY window. 5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to the current Part. You can confirm the sound of the selected Voice by clicking any note on the virtual keyboard or the MOTIF XS keyboard. 5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY window. You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of the window. By executing this operation, the Voice selection is reset to the original status and the VOICE LIBRARY window closes. MOTIF XS Editor Owner’s Manual 7 An Example of MOTIF XS Editor in Use CAUTION When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store the edits, make sure to store the Voice by using the Store window (page 47) before changing the Voice. 5-4 Edit the Voice parameters as desired. Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them. To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the MOTIF XS keyboard. To make detailed settings of the selected Voice, click the arrow button next to the main window to call up the Detailed Parameter section. at the top of the right panel 6. Store the edited settings as a User Voice, as necessary. 6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 47). 6-2 Select a Voice Bank from the following list: • Normal User 1 • Normal User 2 • Normal User 3 • Drum User n Normal User 1 – 3 are shown in the Store window when editing the Normal Voice while Drum User is shown in the Store window when editing the Drum Voice. MOTIF XS Editor Owner’s Manual 8 An Example of MOTIF XS Editor in Use 6-3 Open the selected Bank, select the desired number as destination, then enter the name of the Voice in the box at the top of this window. 6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank. Performing this operation will store the Voice data to the User Voice Bank in the MOTIF XS instrument as well as that within the Editor. CAUTION When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument) will be overwritten. Select the destination Voice number carefully to prevent important data from being erased accidentally. n You can store the settings of the parameters in the “G” row by clicking [Store Global] under [Edit] in the menu bar. 7. Edit the Mixing parameters in the Song mode. This section explains how to edit a Mixing program in the Song mode. 7-1 Change the mode to the Song mode by clicking [Song] of the [Voice]/[Song]/[Pattern] indication. The Auto Sync window appears automatically. 7-2 From the Auto Sync window, click [Start] at the bottom. Data synchronization will be started if the Port settings are correct. As soon as data synchronization is completed, the Auto Sync window is closed. MOTIF XS Editor Owner’s Manual 9 An Example of MOTIF XS Editor in Use 7-3 Edit the parameters of the Mixing and Voice assigned to each Part. If you want to change the parameter values from the original ones of the selected Song or Pattern, click (drag and drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/ Multi section and “1” – “16” in the Part section. To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard. To make detailed settings of the selected Multi, click the arrow button next to the main window to call up the Detailed Parameter section. at the top of the right panel n The MOTIF XS Editor lets you edit the Voice parameters in the Song or Pattern mode as well as Voice mode. In the Voice mode, you can edit only the selected Voice. In the Song or Pattern mode, on the other hand, you can edit the parameters of the Voice assigned to each Part as well as the Mixing parameters. The edited Voice can be stored to the same Voice Bank as a User Voice regardless of the mode used for editing. MOTIF XS Editor Owner’s Manual 10 An Example of MOTIF XS Editor in Use 8. Store the edited Voice or a Mixing, as necessary. 8-1 On the MOTIF XS instrument, press the [STORE] button to call up the Mixing Store window, select the destination, then press the [ENTER] button to store the edited Mixing. For details, refer to the Owner’s Manual of the MOTIF XS. n You can store the edited Mixing also by selecting [Store Mixing] under [Edit] in the menu bar. Note that this operation does not allow you to select the Song as destination and the edited Mixing will be stored to the currently selected Song. 8-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in the menu bar to call up the Store window (page 47) then store the Voice via the same operations as in steps 6-1, 6-2, 6-3 and 6-4. 9. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a file (extension: *.X0E). All the settings you made and the Voice data you stored to the User Banks will be saved as a single file (extension: X0E). When you open this file next time to call up the Auto Sync window, click [Start] to synchronize the status of the parameter settings between the MOTIF XS Editor and the MOTIF XS instrument. • When starting the MOTIF XS Editor from Studio Manager, you can save the MOTIF XS Editor data into a Document file of Studio Manager. • When using DAW (digital audio workstation) software compatible with Studio Connections and the Studio Manager together, the MOTIF XS Editor data can be saved into a project file of the DAW. MOTIF XS Editor Owner’s Manual 11 MOTIF XS Editor Window: Overall section MOTIF XS Editor Window Overall section 1 2 3 1 File, Edit, Bulk, Help Refer to page 36. 2 Voice/Song/Pattern mode Determines the mode of the MOTIF XS, Voice, Song or Pattern. As soon as “Voice,” “Song” or “Pattern” is selected here, the mode of the MOTIF XS instrument changes accordingly and the Auto Sync window (page 51) opens. After setting parameters as necessary on this window, click [Start] to execute data synchronization between the MOTIF XS Editor and the MOTIF XS instrument. 3 ONLINE/OFFLINE Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is indicated, the edited status is completely synchronized between the MOTIF XS Editor and the MOTIF XS instrument, meaning that any parameter edit you make on the MOTIF XS Editor is reflected in the same parameter on the MOTIF XS instrument and vice versa. When OFFLINE is selected, editing on the MOTIF XS Editor will not affect the MOTIF XS instrument and vice versa even if the MOTIF XS instrument is connected to a computer. Note that the indication here is automatically changed according to the status of communication between the MOTIF XS Editor and the MOTIF XS instrument. For example, the ONLINE status changes automatically to OFFLINE when the cable is disconnected accidentally. 1 Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE (2) described below. Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the MOTIF XS instrument is not properly connected to a computer. 2 This OFFLINE indication shows that the MIDI Port is set properly and the MOTIF XS is properly connected to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you can synchronize the settings between the MOTIF XS Editor and the MOTIF XS by clicking the [Start] button. As soon as data synchronization is completed, the Auto Sync window is closed and the status of the Editor changes from OFFLINE to ONLINE. n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync window. 3 This OFFLINE indication shows that the MIDI Port is not set properly or the MOTIF XS instrument is not connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to connect the MOTIF XS instrument to a computer, set the MIDI Port properly then click the [Start] button in the Auto Sync window to execute data synchronization between the MOTIF XS Editor and the MOTIF XS instrument. As soon as data synchronization is completed, the Auto Sync window is closed and the status of the Editor is changed from OFFLINE to ONLINE. MOTIF XS Editor Owner’s Manual 12 MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”) Mixer section (when the Voice/Song/Pattern is set to “Voice”) 1 3 2 1 Global This strip lets you edit the main parameters in the Voice mode, such as effect-related ones. Clicking “G” turns this section on as illustrated below. n When editing any of the Global parameters described below, a small square appears at the top right of the “G” box until you save the edited data as a file. This indication is the same as the green [F] indicator (page 25). Before editing After editing Lo, Lo-M, Mid, Hi-M, Hi (Master EQ) Edits the Master EQ parameters. Chorus Selects the Chorus type. Reverb Selects the Reverb type. Master Effect Turns the Master Effect on or off and selects the Master Effect type. Volume Adjust the entire volume. 2 [Voice]/[AD/mLAN Part] tab Selects the Parts to be edited from [Voice] and [AD/mLAN Part]. The illustration below indicates that the [Voice] tab is active. MOTIF XS Editor Owner’s Manual 13 MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”) 3 Voice When the [Voice] is selected: Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below. n When editing any of the Voice parameters described below, a small square appears at the top right of the “V” box until you save the edited data as a file or you store the edited data as a Voice. This indication is the same as the blue [V] indicator (page 28). Before editing After editing Category, Bank, No., Voice Name Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window appears at the right half section, letting you select a different Voice for editing. VOICE LIBRARY 1 2 9 3 4 5 6 7 8 1 Close button Click this to close this window without applying the changes to the MOTIF XS Editor. 2 [Category]/[Bank] checkboxes Click either of these boxes to determine whether the Voices listed here are divided into Category folders or Bank folders. 3 [+]/[–] buttons Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to close all folders. 4 Folder (Category or Bank) Click each folder to open or close it. MOTIF XS Editor Owner’s Manual 14 MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”) 5 Voices Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-anddropping the Voice(s) to a new location. When the Category checkbox is entered, a checkbox is shown at left of each Voice. If you enter checkmarks to the checkboxes of your most-used or favorite Voice, you can call up a list of these Voices on the VOICE LIBRARY by setting the [Favorites] checkbox to on. n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as normal on your computer OS. n By right-clicking this section and selecting a menu, you can use the following functions. • Opening/closing all the folders • Determining whether the Voices listed here are divided into Category folders or Bank folders. • Copying/pasting • Changing the Voice name • Deleting all the checkmarks of the Favorites checkboxes at left of the Voices 6 Search Box You can search for your desired Voice by inputting a keyword here. 7 [Favorites] checkbox By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the appropriate checkboxes (appearing only when the [Category] checkbox is entered) at the left of each Voice. 8 [OK]/[Cancel] buttons Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit without applying the Voice selection. 9 Refresh When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the MOTIF XS itself, the name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the MOTIF XS. If this happens, click this button to update the Voice names of the VOICE LIBRARY. EQ Lo, Mi, Hi (Part EQ) Adjusts the equalizer settings for the current Voice. Cho, Rev, Pan (Chorus, Reverb, Pan) Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using the graphic knobs. Volume Adjusts the volume of the current Voice. ARP (Arpeggio) Turns Arpeggio playback on or off for the current Voice. MOTIF XS Editor Owner’s Manual 15 MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”) When the [AD/mLAN Part] is selected: This section lets you edit parameters for the AD/mLAN Part in the Voice mode. Clicking “AD” or “mLAN” row turns this section on as illustrated below. Cho, Rev, Pan (Chorus, Reverb, Pan) Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD/mLAN Part in the Voice mode by using the graphic knobs. Volume Adjusts the Volume for the AD/mLAN Part. Output Select Determines the specific output(s) for the AD/mLAN Part. LCD Output jacks Stereo/Mono L&R OUTPUT L and R Stereo asL&R ASSIGNABLE OUTPUT L and R Stereo m1&2 mLAN OUTPUT 1 and 2 Stereo (1: L, 2: R) m3&4 mLAN OUTPUT 3 and 4 Stereo (3: L, 4: R) m5&6 mLAN OUTPUT 5 and 6 Stereo (5: L, 6: R) m7&8 mLAN OUTPUT 7 and 8 Stereo (7: L, 8: R) m9&10 mLAN OUTPUT 9 and 10 Stereo (9: L, 10: R) m11&12 mLAN OUTPUT 11 and 12 Stereo (11: L, 12: R) m13&14 mLAN OUTPUT 13 and 14 Stereo (13: L, 14: R) asL ASSIGNABLE OUTPUT L Mono asR ASSIGNABLE OUTPUT R Mono m1 mLAN OUTPUT 1 Mono : m14 : mLAN OUTPUT 14 MOTIF XS Editor Owner’s Manual : Mono 16 MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”) Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”) 1 3 2 1 Global This strip lets you edit the main parameters in the Song or Pattern mode, such as effect-related ones. Clicking “G” turns this section on as illustrated below. n When editing any of the Global parameters described below, a small square appears at the top right of the “G” box until you save the edited data as a file. This indication is the same as the green [F] indicator (page 28). Before editing After editing Lo, Lo-M, Mid, Hi-M, Hi (Master EQ) Adjusts the Master EQ setting. Chorus Selects the Chorus type. Reverb Selects the Reverb type. Master Effect Turns the Master Effect on or off and selects the Master Effect type. Volume Adjusts the entire volume. MOTIF XS Editor Owner’s Manual 17 MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”) 2 [Part 1-16]/[AD/mLAN Part] tab Selects the Parts to be edited from [Part 1-16] and [AD/mLAN Part]. The illustration below indicates that the [Part 1-16] tab is selected. 3 Part When [Part 1-16] is selected: This section lets you edit parameters for each Part. Clicking any of 1 – 16 turns the corresponding Part on. In the example illustration below, Part 1 is active. n When editing any of the Voice parameters such as Element parameters for each Part, a small square appears at the top right of the “1” – “16” box until you store the edited Voice as a User Voice or Mixing Voice or you save the edited data as a file. This indication is the same as the blue [V] indicator (page 28). Part (Part number) Indicates the Part number. Clicking here turns the corresponding Part on. n In some situations, selecting a Part number on the Editor may not change a Part number on the MOTIF XS and vice versa, even if the Editor is in the ONLINE status. If you come across such a situation and you want to match the Part number of the MOTIF XS with the one in the Editor, change the Part number via the panel controls of the MOTIF XS. Mute/Solo 1 2 1 Mute Sets the Mute status for each Part. Clicking “M” here changes the Mute status for all Parts simultaneously. 2 Solo Selects the Solo Part. Only one Part can be soloed at a time. Category, Bank, No. and Voice Name Indicates the Category Bank and name of the Voice assigned to each Part. When clicking here, the VOICE LIBRARY window appears at the right half section, letting you select a different Voice for the current Part. Using the VOICE LIBRARY is the same here as in the Voice mode; for details, refer to page 14. EQ Lo, Mi, Hi (Part EQ) Adjusts the equalizer settings for each Part. Ins.FX (Insertion Effect Switch) Switches the Insertion Effect on or off. n Insertion Effects can be applied up to eight Parts. Cho, Rev, Pan (Chorus, Reverb, Pan) Adjusts the Chorus Send level, Reverb Send level, and stereo Pan position for each Part by using the graphic knobs. Volume Adjusts the Volume for each Part. MOTIF XS Editor Owner’s Manual 18 MOTIF XS Editor Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”) Rcv Channel (Receive Channel) Determines the MIDI Receive Channel for each Part. Output Select Determines the specific output(s) for the individual Part. The following settings are available. LCD Output jacks Stereo/Mono L&R OUTPUT L and R Stereo asL&R ASSIGNABLE OUTPUT L and R Stereo m1&2 mLAN OUTPUT 1 and 2 Stereo (1: L, 2: R) m3&4 mLAN OUTPUT 3 and 4 Stereo (3: L, 4: R) m5&6 mLAN OUTPUT 5 and 6 Stereo (5: L, 6: R) m7&8 mLAN OUTPUT 7 and 8 Stereo (7: L, 8: R) m9&10 mLAN OUTPUT 9 and 10 Stereo (9: L, 10: R) m11&12 mLAN OUTPUT 11 and 12 Stereo (11: L, 12: R) m13&14 mLAN OUTPUT 13 and 14 Stereo (13: L, 14: R) asL ASSIGNABLE OUTPUT L Mono asR ASSIGNABLE OUTPUT R Mono mLAN OUTPUT 1 Mono m1 : : : m14 mLAN OUTPUT 14 Mono drum See below* See below* * When a Normal Voice is assigned to the edited Part, this value is indicated as “L&R (dr)” and the sound will be output via the OUTPUT L and R jacks in stereo. When a Drum Voice is assigned to the edited Part, this value is indicated as “drum” and the sound will be output via the jacks set in the Drum Key Edit as the Output Select parameter on the MOTIF XS Editor. n Depending on the setting of the Quick Setup (page 32), the audio signal of Parts which are set to “L&R” or “m1” – “m14” or “m1&2” – “m13&14” will be output via the OUTPUT L/R jack as well as mLAN. ARP (Arpeggio) Turns Arpeggio playback on or off for each Part. n Up to four Parts can play back the Arpeggio simultaneously. When [AD/mLAN Part] is selected: This section lets you edit parameters for the AD/mLAN Part in the Song or Pattern mode. Clicking “AD” or “mLAN” row turns this section on as illustrated below. Ins FX (Insertion Effect) Switches the Insertion Effect on or off (only in the AD Part). Cho, Rev, Pan (Chorus, Reverb, Pan) Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD/mLAN Part by using the knob icons. Volume Adjusts the Volume for the AD/mLAN Part. Output Select Determines the specific output(s) for the AD/mLAN Part. The available settings are the same as those of the AD/mLAN Part in the Voice mode. Refer to page 16. MOTIF XS Editor Owner’s Manual 19 MOTIF XS Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Voice”) Parameter Category section (when the Voice/Song/Pattern is set to “Voice”) You can edit detailed parameters for the current Part by clicking the button (located near the top right of the window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed Parameter section moves the Parameter Category Section rightward as shown below. Parameter Category section Parameter Category section MOTIF XS Editor Owner’s Manual Detailed Parameter section 20 MOTIF XS Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Voice”) The indicated categories in the Parameter Category section differs depending on the selected row: G, V, or AD/mLAN Part, as illustrated below. Clicking each of Categories calls up the corresponding parameters in the Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “V” indication shown below appears by clicking the “V” row appearing only when the [Voice] tab is selected at the bottom of the Mixer section. The “AD/mLAN” indication shown below appears by clicking the “AD/mLAN” row appearing only when the [AD/mLAN Part] tab is selected at the bottom of the Mixer section. “G” “V” 1 1 2 3 “AD/mLAN” 1 5 4 6 1 Open/Close button This button opens/closes the Detailed Parameter section. When only the left arrow is indicated in white, the Detailed Parameter section is hidden and you can call it up by clicking here. When only the right arrow is indicated in white, the Detailed Parameter section is shown on the display, allowing you to edit the displayed parameters. The Detailed Parameter section can be closed by clicking this button. You can also conveniently open and close the Detailed Parameter window from your computer keyboard. Hold down the <Ctrl> key (Command key for Mac) and simultaneously press the left arrow (←) key to open the window, or hold <Ctrl> key (Command key for Mac) and press the right arrow (→) key to close it. 2 Global Settings This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter categories calls up the corresponding Global parameters in the Detailed Parameter section. 3 Voice Common This is shown when the “V” row is selected in the Mixer section. Clicking each of the parameter categories calls up the corresponding Voice Common parameters in the Detailed Parameter section. MOTIF XS Editor Owner’s Manual 21 MOTIF XS Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Voice”) 4 Element or Drum Key This is shown when the “V” row is selected in the Mixer section. When a Normal Voice is selected (“Element” is shown in the Parameter Category section) and you select an Element number (from 1 – 16), then clicking each of the parameter categories calls up the corresponding Element parameters in the Detailed Parameter section. When a Drum Voice is selected (“Drum Key” is shown in the Parameter Category section) and you select a key number (from C0 – C6), then clicking each of the parameter categories calls up the corresponding Drum Key parameters in the Detailed Parameter section. When the Drum Voice is selected: When the Normal Voice is selected: 2 3 5 6 4 1 1 Checkboxes for Elements (available when the Normal Voice is selected) Turns each Element on or off. 2 [1] – [8], [All] buttons (available when the Normal Voice is selected) Selects the Element to be edited. When [All] is selected, the Element Quick Setting window appears in the Detailed Parameter section. This window conveniently lets you edit frequently-used Element parameters of all Elements in a single window. 3 Element Parameter categories (available when the Normal Voice is selected) Indicates the categories of Element parameters. Clicking each of the categories calls up the corresponding Element parameters in the Detailed Parameter section. 4 Checkbox for the Drum Key (available when the Drum Voice is selected) Turns the current Drum Key on or off. 5 Drum Key (available when the Drum Voice is selected) Indicates the current Drum Key to be edited. You can select the Drum Key to be edited by clicking either of the triangular buttons below the key indication. 6 Drum Key Parameter categories (available when the Drum Voice is selected) Indicates the categories of Drum Key parameters. Clicking each of categories calls up the corresponding Drum Key parameters in the Detailed Parameter section. 5 AD/mLAN This is shown when the AD/mLAN Part is selected in the Mixer section. The Detailed Parameter section shows the Effect-related parameters. 6 i (Information) Indicates information about the parameter at the cursor arrow position. To view the information for a desired parameter, mouse-over the knob, slider or setting for that parameter. You can switch this Information feature on or off by clicking the “i” box. MOTIF XS Editor Owner’s Manual 22 MOTIF XS Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Song” or “Pattern”) Parameter Category section (when the Voice/Song/Pattern is set to “Song” or “Pattern”) You can edit detailed parameters for the current Part by clicking the button (located near the top right of the window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed Parameter section moves the Parameter Category Section rightward as shown below. Parameter Category section Parameter Category section MOTIF XS Editor Owner’s Manual Detailed Parameter section 23 MOTIF XS Editor Window: Parameter Category section (when the Voice/Song/Pattern is set to “Song” or “Pattern”) The indicated categories in the Parameter Category section differs depending on the selected Part type: M, Part 1 – 16, or AD/mLAN Part. Clicking each of the Categories calls up the corresponding parameters in the Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “Part 1 – 16” indication shown below appears by clicking any place on the Part row appearing only when the [Part 116] tab is selected at the bottom of the Mixer section. The “AD/mLAN” indication shown below appears by clicking the “AD/mLAN” row appearing only when the [AD/mLAN Part] tab is selected at the bottom of the Mixer section. “G” Part 1 – 16 1 1 2 4 “AD/mLAN” 1 6 3 5 7 1 Open/Close button Same as in the Voice mode (page 21). 2 Global Settings This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter categories calls up the corresponding Global parameters in the Detailed Parameter section. 3 Multi Common This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter categories calls up the corresponding Common parameters in the Detailed Parameter section. 4 Part Common This is shown when one of Parts 1 – 16 is selected in the Mixer section. Clicking each of the parameter categories calls up the corresponding Common parameters of the Voice/Part in the Detailed Parameter section. 5 Element or Drum Key This is shown when one of Parts 1 – 16 is selected in the Mixer section. When a Normal Voice is assigned to the current Part (“Element” is shown in the Parameter Category section) and you select an Element number (from 1 – 16), then clicking each of the parameter categories calls up the corresponding Element parameters in the Detailed Parameter section. When a Drum Voice is assigned to the current Part (“Drum Key” is shown in the Parameter Category section) and you select a key number (from C0 – C6), then clicking each of the parameter categories calls up the corresponding Drum Key parameters in the Detailed Parameter section. For details, see the Voice mode (page 22). 6 AD/mLAN Same as in the Voice mode (page 22). 7 i (Information) Same as in the Voice mode (page 22). MOTIF XS Editor Owner’s Manual 24 MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Voice”) Detailed Parameter section (when the Voice/Song/Pattern is set to “Voice”) This section indicates the detailed parameters of the selected category for the current Voice or Global settings. This section introduces what parameters belong to each of the Parameter Categories. For details about each parameter, refer to the Owner’s Manual of the MOTIF XS. V, G, F indicators Three Indicators showing the Editing Status One or more of the following three indicators are shown at the right top of the window when you edit a parameter. Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator disappears when you execute Voice Store (page 47). Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global Store (page 47). Indicates that the parameter edits are not saved yet as a file. n These indicators, “V,” “G” and “F” are linked with the small squares at the top right of “1” – “16” boxes and “G” box in the Mixer section. The “V” and “G” indicators disappear if you execute the Voice Store, Mixing Store and Global Store operation, respectively. The “F” indicator and the small squares at the top right of the “G” box in the Mixer section disappear only if you execute the File Save operation. All the indicators and the small squares disappear if you execute the File Save operation. MOTIF XS Editor Owner’s Manual 25 MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Voice”) Global Settings This Parameter category which is called up by selecting the “G” row in the Mixer section consists of the following sub categories. Master FX/EQ (Master Effect/EQ) Clicking this in the Parameter Category section calls up the Master Effect/EQ parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “Master FX” or “Master EQ” on the UTILITY window. Controller Assign Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “Control” on the UTILITY window. Micro Tuning Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “Tuning” on the UTILITY window. Voice Common This Parameter Category is called up by selecting the “V” row in the Mixer section. The parameters belonging to this category lets you make the settings applied to all the Elements or Drum Keys commonly. The following sub categories are included. General Clicking this in the Parameter Category section calls up the parameters such as Voice name and pitchrelated parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “EG/EQ” on the Voice Play window ([VOICE] → [F3]) and “Name” and “Play Mode” on the VOICE Edit-Common window. ARP (Arpeggio) Clicking this in the Parameter Category section calls up the Arpeggio-related parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “ARP Main” and “ARP Other” on the VOICE Edit-Common window. Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which lets you use the search function for the selecting Arpeggio Types, as with the VOICE LIBRARY window (page 14). Controller Set Clicking this in the Parameter Category section calls up the Controller Set parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “Control Set” on the VOICE Edit-Common window. LFO (Low Frequency Oscillator) Clicking this in the Parameter Category section calls up the LFO-related parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “Com LFO” on the VOICE Edit-Common window. This Parameter Category is not available for Drum Voices. Effect Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “Effect” on the VOICE Edit-Common window. MOTIF XS Editor Owner’s Manual 26 MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Voice”) Element or Drum Key This Parameter Category is called up by selecting the “V” row in the Mixer section. The “Element” is shown when the Normal Voice is selected while the “Drum Key” is shown when the Drum Voice is selected. The parameters belonging to this category lets you make the settings applied to each of the Elements or Drum Keys individually. The following sub categories are included. n For information about the checkboxes at left of each Element number 1 – 8 and “All,” refer to page 22. For information about the Drum Key (note name) and checkbox, refer to page 22. Oscillator/Pitch Clicking this in the Parameter Category section calls up the parameters related to the Oscillator and Pitch in the Detailed Parameter section. Filter Clicking this in the Parameter Category section calls up the Filter-related parameters in the Detailed Parameter section. Amplitude Clicking this in the Parameter Category section calls up the Amplitude-related parameters in the Detailed Parameter section. LFO/EQ (Low Frequency Oscillator/Equalizer) Clicking this in the Parameter Category section calls up the parameters related to the LFO and EQ in the Detailed Parameter section. AD/mLAN This Parameter Category is called up by selecting the “AD/mLAN” row in the Mixer section. The parameters belonging to this category lets you make the settings applied to the AD/mLAN Part in the Voice mode. The following sub category is included. Effect Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to the AD/mLAN Part of the Voice mode in the Detailed Parameter section. MOTIF XS Editor Owner’s Manual 27 MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Song” or “Pattern”) Detailed Parameter section (when the Voice/Song/Pattern is set to “Song” or “Pattern”) This section indicates the detailed parameters of the selected category for the current Part and the Voice assigned to the current Part, or the Global settings. This section introduces what parameters belong to each of the Parameter Categories. For details about each parameters, refer to the Owner’s Manual of the MOTIF XS. V, M, G, F indicators Four Indicators showing the Editing Status One or more of the following four indicators are shown at the right top of the window when you edit a parameter. Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator disappears when you execute Voice Store (page 47). Indicates that the Multi edits are not stored yet. This indicator disappears when you execute Mixing Store (page 48). Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global Store (page 47). Indicates that the parameter edits are not saved yet as a file. n These indicators, “V,” “M,” “G” and “F” are linked with the small squares at the top right of “1” – “16” boxes and “G” box in the Mixer section. The “V,” “M” and “G” indicators disappear if you execute the Voice Store, Mixing Store and Global Store operations, respectively. The “F” indicator and the small squares at the top right of the “G” box in the Mixer section disappear only if you execute the File Save operation. All the indicators and the small squares disappear if you execute the File Save operation. Global Settings This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following sub categories. Micro Tuning Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “Tuning” on the UTILITY window. MOTIF XS Editor Owner’s Manual 28 MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Song” or “Pattern”) Multi Common This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following sub categories. Effect Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “Reverb” and “Chorus” on the SONG or PATTERN Edit-Common window. Master FX/EQ (Master Effect/EQ) Clicking this in the Parameter Category section calls up the parameters related to the Master Effect and EQ in the Detailed Parameter section. On the MOTIF XS instrument, the Master EQ parameters are the same as those called up by selecting “Master FX”/”Master EQ” on the SONG or PATTERN Edit-Common window. Controller Assign Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “Ctrl Asgn” on the SONG or PATTERN Edit-Common window. Part Common This Parameter category which is called up by selecting any of the “1” – “16” rows in the Mixer section consists of the following sub categories. General Clicking this calls up the GENERAL window in the Parameter Category section. This window lets you edit the Voice Common parameters such as naming and the Mixing Part parameters such as Pitch, Portamento, Note/Velocity Limit and Part EQ. In the Part Common General section, both the Mixing Part parameters (the “M” indicator appears at the top right during editing) and Voice Common parameters (the “V” indicator appears at the top right during editing) can be edited. To distinguish between them, a small dot is shown at the immediate left of the parameters. ARP (Arpeggio) Clicking this in the Parameter Category section calls up the parameters related to the Arpeggio assigned to the current Part in the Detailed Parameter section. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “ARP Main” and “ARP Other” on the SONG or PATTERN Edit-Part window. Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which lets you use the search function for the selecting Types, as with the VOICE LIBRARY window (page 14). RCV/Control Set (Receive/Control Set) Clicking this calls up the RCV/CONTROLLER SET ASSIGN window in the Parameter Category section. This window lets you edit the Receive Switch parameters for the current Part and the Controller Set Assign parameters for the current Part and the Voice. On the MOTIF XS instrument, these parameters are the same as those called up by selecting “RcvSwitch” on the SONG or PATTERN Edit-Part window. LFO (Low Frequency Oscillator) Clicking this in the Parameter Category section calls up the LFO-related parameters of the Voice assigned to the current Part in the Detailed Parameter section. This Parameter Category is not available if the Drum Voice is assigned to the current Part. Effect Clicking this in the Parameter Category section calls up the parameters related to the Insertion Effect for the current Part and System Effect applied to all the Parts in the Detailed Parameter section. MOTIF XS Editor Owner’s Manual 29 MOTIF XS Editor Window: Detailed Parameter section (when the Voice/Song/Pattern is set to “Song” or “Pattern”) Element or Drum Key This Parameter Category is called up by selecting any of the “1” – “16” rows in the Mixer section. The “Element” indication appears when the Normal Voice is assigned to the current Part while the “Drum Key” is shown when the Drum Voice is assigned. The parameters belonging to this category lets you make the settings applied to each of the Elements or Drum Keys individually. For details, see the Voice mode section. AD/mLAN This Parameter Category is called up by selecting the “AD/mLAN” row in the Mixer section. The parameters belonging to this category lets you make the settings applied to the AD/mLAN Part in the Song or Pattern mode. The following sub category is included. Effect Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to the AD/mLAN Part of the Song or Pattern mode in the Detailed Parameter section. MOTIF XS Editor Owner’s Manual 30 MOTIF XS Editor Window: Bottom section Bottom section 3 1 7 4 5 2 6 1 Controller Set status This section indicates which controller on the MOTIF XS instrument is used as the Control Source of the Controller Set edited in the RCV/CONTROLLER SET ASSIGN window. 2 1 3 1 Part Indicates the current Part. 2 Control Source (Controller) Indicates the six controllers as source of the Controller Set. The abbreviations for the Controllers are as follows: Indication Control Source Indication Control Source PB Pitch Bend Wheel BC Breath Controller MW Modulation Wheel AS1 ASSIGN 1 knob AT After Touch (keyboard) AS2 ASSIGN 2 knob FC Foot Controller FC2 Foot Controller 2 FS Foot Switch AF1 ASSIGNABLE FUNCTION 1 button RB Ribbon Controller AF2 ASSIGNABLE FUNCTION 2 button 3 On/Off status When a lamp is turned on, a certain function (Destination) is assigned to the corresponding Source (controller). When a lamp is turned off, no function (Destination) is assigned to the corresponding Source (controller). MOTIF XS Editor Owner’s Manual 31 MOTIF XS Editor Window: Bottom section 2 Quick Setup From this section, you can instantly call up appropriate panel settings for the Song or Pattern mode of the MOTIF XS instrument by clicking a convenient preset setup. n The settings of the MOTIF XS instrument made via the operation here cannot be saved as an Editor file. 1 2 5 6 7 3 4 MIDI The following setups are equivalent to those in Quick Setup in the Utility mode of the MOTIF XS. 1 Internal This setup is useful when you use the sequencer function (Song or Pattern) on the MOTIF XS instrument alone (without a computer). 2 SEQ to PC This setup is useful when you transmit the Song or Pattern playback data to a connected computer and record it to a DAW application software on the computer. 3 REC on PC This setup is useful when you record your keyboard performance on the MOTIF XS to a DAW application software on the connected computer. 4 ARP to PC This setup is useful when you transmit the Arpeggio playback data on the MOTIF XS instrument to a connected computer and record it to a DAW application software on the computer. mLAN Audio The following setups are equivalent to the mLAN Monitor Setup in the Utility mode of the MOTIF XS. 5 St-Alone (stand alone) This should be selected when you are using the MOTIF XS alone or are not using the DAW software even with a computer connected to the MOTIF XS via an IEEE1394 cable. When this is selected, the audio signal of the MOTIF XS (only Parts which are set to “L&R” as the Output Select parameter) will be output directly via the OUTPUT L/MONO and R jacks normally. 6 With PC This should be selected when you are using the MOTIF XS as an audio device with the DAW software. When this is selected, the audio signal of the MOTIF XS (only Parts which are set to “L&R” as the Output Select parameter) will be output to the DAW software on a computer via an IEEE1394 cable, merged and mixed with the DAW sound, returned back to the MOTIF XS, then output via the OUTPUT L/MONO and R jacks. Selecting this allows you to apply VST Effects within the DAW software to the MOTIF XS sound. 7 PC Drct (Direct Monitor) This should be selected when recording your keyboard performance on the MOTIF XS instrument to the DAW software on the computer. The audio signal of the MOTIF XS (only Parts which are set to “m1” –“m14” or “m1&2” – “13&14” as the Output Select parameter) will be sent to DAW, while the audio signal also will be output directly via the OUTPUT L/MONO and R jacks to monitor the sound without latency. The audio signal from the DAW software will be output via an IEEE1394 cable. Keep in mind that the Rec Monitor of the DAW software should be set to “off” in order to prevent “double” sound from occurring. MOTIF XS Editor Owner’s Manual 32 MOTIF XS Editor Window: Bottom section 3 Quick Edit Knobs This section lets you adjusts various parameters assigned to the Knobs on the front panel of the MOTIF XS instrument. 1 2 1 [TONE 1]/[TONE 2]/[ARP] Selects the set of functions assigned to the eight knobs. The functions shown above each of the knobs are same as those printed on the front panel of the MOTIF XS. 2 Knobs 1 – 8 You can click each of the eight knobs to adjust the value of the assigned function. 4 ARP (Arpeggio) Allows you to change the Arpeggio related setup (on/off status and selecting 1 – 5). 5 MIDI monitor Turns the MIDI monitor function on or off. By turning this MIDI jack icon on, the note on/off messages transmitted to the MOTIF XS will be shown on the virtual keyboard at the bottom of the Editor window. Turn the MIDI monitor on if you want to confirm the edit result by playing the MOTIF XS or the MIDI keyboard connected to the computer. 6 [A.Func] (Assignable Function) button This button is related to “All AF off,” “AF1 on” and “AF2 on” selected as a value of the XA Control parameter on the OSCILLATOR/PITCH window of the Normal Voice Element Edit. For details, refer to the Owner’s Manual of the MOTIF XS. 7 Keyboard Allows you to audition the edited sound. Note on/off messages corresponding to the keys you click or drag will be transmitted to the external device via the MIDI port specified in the Editor Setup window (page 39) as the MIDI OUT parameter. n The velocity when clicking a key is determined by the setting of the Keyboard Velocity parameter (page 41) in the Setup window. n When a Drum Voice is edited, you can initialize the parameter settings of each key by right-clicking on the virtual keyboard. From the menu called up by right-clicking, selecting “Initialize key” will initialize all the parameter settings except for the waveform assignment of the currently selected drum key, while selecting “Initialize key (with Wave)” will initialize the all the parameter settings including the waveform assignment. MOTIF XS Editor Owner’s Manual 33 Basic Operations Basic Operations This section covers basic operations of the MOTIF XS Editor. Naming a Voice You can assign an original name of your choice to the edited Voice on the VOICE LIBRARY window, GENERAL window in the Part Common General, and the Store window. From the VOICE LIBRARY window (page 14), select a User Voice or Mixing Voice then click the selected Voice so that you can edit the name. After editing the Voice name, pressing the <Enter> key or locating the cursor to another parameter finalizes the edited name while pressing the <Esc> key aborts it. From the GENERAL window (below) and Store window (page 47), locate the cursor in the text box of “Voice Name” at the top of this window, then edit the name in the text box as desired. After editing, pressing the <Enter> key or locating the cursor to another parameter finalizes the edited name. Searching for a Voice/Arpeggio Type You can search for the desired Voice and Arpeggio type on the VOICE LIBRARY window (page 14) and ARP LIBRARY window just by inputting a keyword in the text box at the bottom of these windows respectively. Likewise, the Search function is available on the Import window (page 37). Inputting a numerical value When double clicking a value box such as that shown above, the value box can be edited and you can input a numerical value directly by using numeric keys. After editing, pressing the <Enter> key or locating the cursor to another parameter finalizes the value while pressing the <Esc> key aborts it. You can edit the value also by using the Cursor key or <Page Up>/<Page Down> key after clicking this box. In Windows, to reset the value to its default, simultaneously hold down the <Ctrl> key and click on the value box. On the Macintosh, to reset the value to its default, simultaneously hold down the Command key and click on the value box. n For certain parameters, the value can be edited only by using the mouse and cannot be input directly by using the numeric keys. MOTIF XS Editor Owner’s Manual 34 Basic Operations Selecting a value Clicking inside the value box like such as that shown above calls up the list box, from which you can select the desired value. You can also select the value also by clicking the arrow at right end of this box. Using a knob Dragging or clicking the knob such as that shown above changes the value of the corresponding parameter. After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you want to make fine adjustments to the value, drag the mouse while holding the <Shift> key. The specific operation of the knob is determined by the settings of the Knob Guide parameter and Knob Mouse Control parameter in the Setup window (page 39). In Windows, to reset the value to its default, simultaneously hold down the <Ctrl> key and click on the knob. On the Macintosh, to reset the value to its default, simultaneously hold down the Command key and click on the knob. Using a slider Dragging or clicking the slider such as that shown above changes the value of the corresponding parameter. After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you want to make fine adjustments to the value, drag the mouse while holding the <Shift> key. The specific operation of the slider is determined by the setting of the Slider Mouse Control parameter in the Setup window (page 39). In Windows, to reset the value to its default, simultaneously hold down the <Ctrl> key and click on the slider. On the Macintosh, to reset the value to its default, simultaneously hold down the Command key and click on the slider. Using a graph Dragging one of the boxes in the graph (as shown above) changes the value of the corresponding parameter. In Windows, simultaneously hold down the <Ctrl> key and click on the box to reset the corresponding value to the default setting. To reset the entire graph and its values to the default setting, simultaneously hold down the <Ctrl> key and click on any section in the graph (other than one of the boxes) to reset the entire graph and its values to the default setting. On the Macintosh, simultaneously hold down the Command key and click on the box to reset the corresponding value to the default setting. To reset the entire graph and its values to the default setting, simultaneously hold down the Command key and click on any section in the graph (other than one of the boxes) to reset the entire graph and its values to the default setting. MOTIF XS Editor Owner’s Manual 35 Menu: [File] menu Menu [File] menu New Creates and opens a new file containing the default Mixing setup and Voice data. Open... Opens an already saved file of the MOTIF XS Editor. The following file types can be selected and opened. • MOTIF XS Editor (.X0E) • MOTIF-RACK XS Editor (.X1E) • MO6/MO8 Multi Part Editor file (.M4E) • MOTIF-RACK ES Multi Part Editor (.M3E) • MOTIF ES6/7/8 Multi Part Editor (.M4E) • MOTIF XS All Files (.X0A) CAUTION Unlike files of other applications such as word processors, only a single file can be opened and edited on the MOTIF XS Editor. Before opening a new file, make sure to save the edited settings as a file to avoid losing data. Save Saves the current settings by overwriting the current file. Save As... Saves the current settings as a MOTIF XS Editor file (.X0E) under a new or different name. MOTIF XS Editor Owner’s Manual 36 Menu: [File] menu Import Imports the Voice data (a specific Voice in a specific folder or all Voices in a specific folder) from a different file to the current file. Click the File Select button (3), select a file including your desired Voice(s) so that the folders in the selected file are listed as the Source Voice list (8), select a Voice or Voices or a folder or folders in the list (8), select a destination location in the Destination Voice list (9) of the current file, then click [Import] (5) to execute the Import operation. The following file types can be selected. • MOTIF XS Editor (.X0E) • MOTIF-RACK XS Editor (.X1E) • MO6/MO8 Voice Editor and MOTIF ES6/7/8 Voice Editor (.W7E) • MO6/MO8 Multi Part Editor (.M4E) • MOTIF-RACK ES Multi Part Editor (.M3E) • MOTIF ES6/7/8 Multi Part Editor (.M4E, .M2E) • MOTIF-RACK ES Voice Editor files(.W9E) • MOTIF XS ALL (.X0A) • MOTIF XS ALL Voice (.X0V) 2 3 4 5 6 1 6 7 ) 8 7 9 1 [X] (Close) button Click this to close this window without importing. 2 File name (Indication only) Indicates the currently selected file. 3 File selection button Click this to open the dialog for file selection. 4 [Category]/[Bank] checkboxes Click either of these boxes to determine whether the Voices in the Source Voice list (8) are divided into Categories or Banks. MOTIF XS Editor Owner’s Manual 37 Menu: [File] menu 5 [Import] button Click this to actually import the Voice(s) selected in the Source Voice list (8) to the specified location in the Destination Voice list (9). n You can also import Voice data without the use of this button by dragging the desired Voice or folder from the Source Voice list then dropping it to the Destination Voice list. n A Normal Voice cannot be imported to the User Drum Voice Bank. Likewise, a Drum Voice cannot be imported to the User Normal Voice Bank. No Voices can be imported to the Preset Voice Bank. 6 [+]/[–] buttons Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to close all folders. 7 Folder button (Bank or Category) Double click here to open or close the folder. 8 Source Voice list Indicates the Voices or folders of the selected file to be imported. By right-clicking this section and selecting a menu, you can perform the following functions. • Opening/Closing all the folders • Determining whether the Voices listed here are divided into Category folders or Bank folders 9 Destination Voice list Indicates the Voices or folders currently edited on the MOTIF XS Editor. n By right-clicking this section and selecting a menu, you can open or close all the folders. ) Search box You can search for your desired Voice from the Source Voice list (8) by inputting a keyword here. MOTIF XS Editor Owner’s Manual 38 Menu: [File] menu Setup Determines the basic setup of the MOTIF XS Editor. After setting necessary parameters, click [OK] to actually apply the settings to the MOTIF XS Editor. 1 4 2 5 3 6 8 7 9 ! ) @ # 1 [X] (Close) button Click this to close this window without applying the settings. This button is the same as the [Cancel] button (#). 2 [mLAN/1394]/[USB] checkboxes Select which port (USB or mLAN) is used for communication between the MOTIF XS and computer. 3 [Detail] button When “USB” is selected at the [mLAN/1394]/[USB] checkboxes (2), you can make detailed settings for the Input Port and Output Port by setting this button to “On.” This setting is necessary if the Port name is changed on a computer. 4 MIDI Set the MIDI Port for communication between the MOTIF XS Editor and the MOTIF XS instrument. When “USB” is selected at the [mLAN/1394]/[USB] checkboxes (2) and the [Detail] button (3) is set to “Off,” select a value such as “Yamaha USB 0-1” or “MOTIF XS6-1(2,3,4)” at the top left column. When “USB” is selected and the [Detail] button (3) is set to “On,” select Port 4 for the MOTIF XS in the MIDI In setting then select Port 1 and Port 4 for the MOTIF XS in the MIDI Out settings. When “mLAN/1394” is selected at the [mLAN/1394]/[USB] checkboxes (2), select the MIDI Port of the MOTIF XS at the MIDI column and select the model name such as “MOTIF XS” at the mLAN Device column. n When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the previously used Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the host application. n When the MOTIF XS is connected to a computer via an IEEE1394 cable and the mLAN/1394 setting above is turned on, the MIDI Port can handle only note on/off messages. The mLAN Device setting is necessary for transferring MIDI messages other than note on/off. n Keep in mind that setup on the host application (Studio Manager) is necessary before making settings here. When starting Studio Manager as a stand-alone application, see page 5. When starting Studio Manager as a plug-in of the DAW application, refer to the manual of the DAW application. n Make sure to set the MIDI IN/OUT parameter to “USB” in the MIDI display of the Utility mode on the MOTIF XS instrument when “USB” is selected at the [mLAN/1394]/[USB] checkboxes. Likewise, make sure to set the MIDI IN/OUT parameter to “mLAN” in the Utility mode when “mLAN/1394” is selected. MOTIF XS Editor Owner’s Manual 39 Menu: [File] menu 5 Device No. Set the Device number to the same as the value specified in the MIDI display of the Utility mode on the MOTIF XS itself. When the Device number on the MOTIF XS is set to “All,” set the Device No. here to “1.” 6 Auto Sync Setting This section lets you set how the data synchronization between the MOTIF XS Editor and the MOTIF XS instrument is executed when “OFFLINE” is changed to “ONLINE.” Actual data synchronization is executed from the Auto Sync window (page 51) called up automatically under certain circumstances such as clicking the [OFFLINE] button, starting the MOTIF XS Editor and opening a new file on the Editor. Global Determines whether or not the Global data (see page 4) is synchronized and which data (MOTIF XS Editor or MOTIF XS itself) is synchronized with the other. Current Determines whether or not the Current data (see page 4) is synchronized and which data (MOTIF XS Editor or MOTIF XS itself) is synchronized with the other. Voice Determines whether or not the Voice data (see page 4) is synchronized and which data (MOTIF XS Editor or MOTIF XS itself) is synchronized with the other. Auto Start When this is set to “On” and one of the following operations is executed, data synchronization will be started automatically as soon as the Auto Sync window is opened. • When clicking “OFFLINE” after setting the MIDI IN/OUT parameter correctly in the Utility mode on the MOTIF XS, setting the MIDI Ports correctly on the computer, and making a proper connection. • When the connection between the MOTIF XS and a computer are corrected after appropriately correcting the setup of the MOTIF XS and the computer. • When the settings on the MOTIF XS instrument and the computer are corrected after appropriately reconnecting the devices. n The parameters set here apply also to the parameters having the same names in the Auto Sync window. CAUTION When the Auto Start parameter is set to “On,” data synchronization is started automatically under certain circumstances (page 51) such as clicking the [OFFLINE] button, starting the Editor and opening a new file on the Editor. Keep in mind that this will cause unexpected data loss on the MOTIF XS Editor or the MOTIF XS itself, since new data automatically overwrites old data upon data synchronization. Make sure to save your important data before using the MOTIF XS Editor. 7 Knob Guide Determines whether or not the Knob Guide (knob editing area) appears when adjusting a knob. Setting this to On conveniently enlarges the knob editing area (as shown), making it much easier to edit a knob’s parameter. Knob Guide: On MOTIF XS Editor Owner’s Manual Knob Guide: Off 40 Menu: [File] menu 8 Knob Mouse Control Determines how the knob illustrated at right responds to your mouse control. Circular When this is selected, you can jump to a specific value by clicking at a point within the Knob editing area. You can edit the value also by dragging the mouse in a circular direction—in much the same way as turning an actual knob. Relative Circular When this is selected, you can edit the value by dragging the mouse in a circular direction—in much the same way as turning an actual knob. Linear When this is selected, you can edit the value by dragging any point in the knob editing area (the mouse pointer disappears) and moving it vertically or horizontally—in much the same way as operating a slider. 9 Slider Mouse Control Determines how the Slider illustrated at right responds to your mouse control. Jump When this is selected, clicking any location in the slider jumps the slider pointer to that location. Touch When this is selected, you can edit the value by dragging and moving the slider pointer horizontally—in much the same way as operating an actual slider. Clicking at any location in the slider (other than the orange pointers) does not affect the slider. Ramp When this is selected, clicking at any location in the slider (other than the orange pointers) moves the nearest pointer to that location. Dragging any point in the slider moves the slider pointer accordingly. Relative When this is selected, you can edit the value by dragging any point (the mouse pointer disappears) and moving it horizontally. ) Keyboard Velocity Determines the Velocity value generated when clicking any note on the virtual keyboard at the bottom of the Editor window. When “Fix” is turned on, clicking any key generates the same velocity value which can be specified in the box at right of “Fix.” When “Free” is turned on, the generated Velocity value differs depending on the click location. The lower on the key graphic you click, the higher the Velocity. MOTIF XS Editor Owner’s Manual 41 Menu: [File] menu ! Inc/Dec Action Determines how the triangular buttons ([▲]/[▼]/[L]/[M]) located at the parameter boxes as illustrated below work. Inc/Inc: When this is selected, clicking the [▲] button increases the value by 1 while clicking the [L] button moves the cursor downward by one item. Inc/Dec: When this is selected, clicking the [▲] button increases the value by 1 while clicking the [L] button moves the cursor upward by one item. Dec/Inc: When this is selected, clicking the [▲] button decreases the value by 1 while clicking the [L] button moves the cursor downward by one item. Dec/Dec: When this is selected, clicking the [▲] button decreases the value by 1 while clicking the [L] button moves the cursor upward by one item. @ [OK] button Click this to actually apply the settings to the MOTIF XS Editor and close the Setup window. # [Cancel] button Click this to close the Setup window without applying the settings to the MOTIF XS Editor. MOTIF XS Editor Owner’s Manual 42 Menu: [File] menu Hardware Utility From the HARDWARE UTILITY window called up by selecting this menu, you can make the settings related to the parameters in the Utility mode of the MOTIF XS. Editing the parameter on this window will affect the parameter having the same name of the MOTIF XS instrument. After making the settings, click [Store] at the bottom of this window to store the settings as Global data. 1 2 4 3 MOTIF XS Editor (parameters on the above window) 1 Tone 5 6 MOTIF XS instrument Note Shift [UTILITY] → [F1] General → [SF1] Play Tune [UTILITY] → [F1] General → [SF1] Play 2 Auto Load Setup Power On Mode [UTILITY] → [F1] General → [SF4] AutoLoad 3 MIDI Channel Basic Receive Ch [UTILITY] → [F5] Control → [SF2] MIDI Basic Transmit Ch [UTILITY] → [F5] Control → [SF2] MIDI 4 MIDI Sync MIDI Sync [UTILITY] → [F5] Control → [SF2] MIDI Clock Out [UTILITY] → [F5] Control → [SF2] MIDI 5 MIDI Switch Bank Select [UTILITY] → [F5] Control → [SF2] MIDI Program Change [UTILITY] → [F5] Control → [SF2] MIDI Local Control [UTILITY] → [F5] Control → [SF2] MIDI Controller Reset [UTILITY] → [F5] Control → [SF2] MIDI 6 MIDI Other MOTIF XS Editor Owner’s Manual 43 Menu: [Edit] menu [Edit] menu Voice mode Song or Pattern mode Undo Cancels the changes you made in your most recent editing. [Undo] menu will be gray and cannot be selected depending on the most recent edited parameter. Redo Redo is available only after using Undo, and lets you restore the changes you made before undoing them. Copy Copies the selected items such as characters of the Voice name in the text box, Voice(s) in the VOICE LIBRARY window and entire Part setup to the clipboard. Paste Pastes the Voice(s), entire Part setup, and characters from the clipboard to the specified location. Initialize Current Voice (in the Voice mode)/Initialize Current Part Voice (in the Song or Pattern mode) In the Voice mode, select [Initialize Current Voice] under [Edit] to call up the Initialize Current Voice window from which you can initialize the current Voice by clicking [Start]. In the Song or Pattern mode, select [Initialize Current Part Voice] under [Edit] to call up the Initialize Current Part Voice window from which you can initialize the Voice assigned to the current Part by clicking [Start]. When a Normal Voice is edited: 1 2 4 3 5 6 MOTIF XS Editor Owner’s Manual 44 Menu: [Edit] menu When a Drum Voice is edited: 1 2 4 3 5 6 1 [X] (Close) button Click this to close the window without executing Initialization. 2 [All]/[Clear] button Clicking [All] turns all the checkboxes in this window on while clicking [Clear] turns them off. 3 [Common] checkbox When this is turned on, clicking [Start] initializes the settings of all the Common parameters (Voice Common parameters when the Editor is set to the Voice mode or Part Common parameters when the Editor is set to the Song or Pattern mode). 4 with Wave Assignment When this is turned on, clicking [Start] initializes the Waveform assignment for all Elements of the current Voice. 5 Element [1] – [8] or Drum Key C0 – C6 checkboxes When a Normal Voice is edited, clicking [Start] initializes the settings of all parameters for the Elements which are turned on here. When a Drum Voice is edited, clicking [Start] initializes the settings of all parameters for the drum keys which are turned on here. 6 [Start] button After the setup is completed, click [Start] to initialize the parameter settings and close the window. MOTIF XS Editor Owner’s Manual 45 Menu: [Edit] menu Initialize Current Mixing (only in the Song or Pattern mode) Select this menu to call up the Initialize Current Part Voice window, set the parameters as necessary, then click [Start] to initialize the Voice data assigned to the current Part. 1 2 4 5 3 6 7 8 1 [X] (Close) button Click this to close the window without executing Initialization. 2 [All]/[Clear] button Clicking [All] turns all the check boxes in this window on while clicking [Clear] turns them off. 3 [Multi Common] checkbox When this is turned on, clicking [Start] initializes the settings of all the Multi Common parameters. 4 Initialize Template The following templates for initializing are available. Normal: When this is selected, clicking [Start] initializes the Editor setup to the normal default settings. GM: When this is selected, clicking [Start] initializes the Editor Setup so that the MOTIF XS can be used as a GM tone generator. Contemporary R&B – TurkishPop: When one of these templates is selected, clicking [Start] initializes the Editor Setup so that the MOTIF XS can be used as a tone generator which matches the name of the selected template. 5 Output Template Sets the Output jack for audio signal of all the Parts to “L&R” or “mLAN.” 6 Part [1] – [16] checkboxes Clicking [Start] initializes the settings of all parameters for the Parts which are turned on here. 7 [AD]/[mLAN] checkbox When this is turned on, clicking [Start] initializes the settings of all parameters for the AD/mLAN Part. 8 [Start] button After setup is completed, click [Start] to initialize the Mixing setup and close the window. MOTIF XS Editor Owner’s Manual 46 Menu: [Edit] menu Store Global Simply selecting this menu will store the Global settings. The Global settings will be stored only to the internal memory of the MOTIF XS instrument. Store Voice From the window selected via this menu, you can store the edited Voice. The current Voice is stored in the Voice mode while the Voice assigned to the current Part is stored in the Song or Pattern mode. Select the desired Bank folder (5), select the number of the destination Voice (6), input the Voice name (2), then click the [Store] button to store the Voice as a User Voice or Mixing Voice (available only in the Song or Pattern mode). 2 3 1 4 5 6 1 [X] (Close) button Click this to close this window without executing the Store operation. 2 Voice Name Enter an original name for the Voice to be stored. 3 [Store] button Click this to store the edited Voice to the specified Bank and number. CAUTION Like other parameters, the Voice data is synchronized with the MOTIF XS instrument when ONLINE (page 12) is indicated. This means that clicking [Store] in this window stores the edited Voice to the corresponding Bank in the internal memory of the MOTIF XS instrument. Be careful not to overwrite any important data. 4 [+]/[–] buttons Pressing the [+] button opens all the Bank folders, while pressing the [–] button closes them. MOTIF XS Editor Owner’s Manual 47 Menu: [Edit] menu 5 Bank folder This section indicates the following Banks to which you can store the edited Voice. • Normal User 1 • Normal User 2 • Normal User 3 • Drum User • Mixing Clicking on each Bank folder opens it and all the Voices stored in the Bank appear as illustrated above (from the left illustration to the right one). When clicking the Bank folder again, it closes as illustrated above (from the right illustration to the left one). Note that the indicated Bank differs depending on the current mode and current Voice type. The Mixing Bank is shown only in the Song or Pattern mode. The Drum User Bank is shown only when the Drum Voice is selected (in the Voice mode) or the Drum Voice is assigned to the current Part (in the Song or Pattern mode). Likewise, the Normal User Bank is shown only when the Normal Voice is selected (in the Voice mode) or the Normal Voice is assigned to the current Part (in the Song or Pattern mode). 6 Voices The Voices in the selected Bank are listed. Before clicking the [Store] button, you need to select the number of the destination Voice here. Right clicking on this section calls up the menus “All Open” and “All Close,” letting you open or close all the Bank folders. Store Mixing (only in the Song or Pattern mode) Simply selecting this menu will store the Mixing settings in the Song or Pattern mode. The Mixing settings will be stored to the internal memory (overwritten to the Mixing setup of the currently selected Song or Pattern) of the MOTIF XS instrument. Voice Compare (only in the Voice mode) This menu lets you switch between the just-edited Voice and its original, unedited condition, allowing you to hear how your edits affect the sound. Select “Voice Compare” to enter the Voice Compare mode. In this mode, you can hear the sound of the original Voice and none of the parameters in the window can be edited. Select “Voice Compare” again to return to the original status. n The status of the MOTIF XS instrument is maintained even if you enable the Voice Compare mode on the MOTIF XS Editor. Mixing Compare (only in the Song or Pattern mode) This menu lets you switch between the just-edited Mixing and its original, unedited condition, allowing you to hear how your edits affect the sound. Select “Mixing Compare” to enter the Mixing Compare mode. In this mode, you can hear the sound of the original Mixing setup and none of the parameters in the window can be edited. Select “Mixing Compare” again to return to the original status. n The status of the MOTIF XS instrument is maintained even if you enable the Mixing Compare mode on the MOTIF XS Editor. MOTIF XS Editor Owner’s Manual 48 Menu: [Bulk] menu [Bulk] menu Data Sync Select this menu to call up the Initialize Data Sync window, set the parameters as necessary, then click [Start] to transmit the specified data from/to the MOTIF XS Editor to/from the MOTIF XS instrument. 1 3 2 4 5 6 1 [X] (Close) button Click this to close this window without executing Data Sync. 2 [Transmit]/[Receive] checkboxes Determines whether the MOTIF XS Editor transmits data to the MOTIF XS or receives data from the MOTIF XS. [Transmit] checkbox: When this is checked, clicking [Start] button transmits data from the Editor to the instrument. [Receive] checkbox: When this is checked, clicking [Start] button transmits data from the instrument to the Editor. 3 Data type to be transmitted/received Here, you can set which data type is to be transmitted or received. Clicking the [All] button turns all the data types on while clicking the [Clear] button turns all the data types off. Current Turn this on then click the [Start] button to transmit or receive the Current settings. Global Turn this on then click the [Start] button to transmit or receive the Global settings. Preset (Favorites) Turn this on then click the [Start] button to transmit or receive the Favorites-related settings of the Preset Voice(s). Normal User 1 – 3 Turn this on then click the [Start] button to transmit or receive the data of the Normal User Voice Bank 1, 2, and 3 respectively. Drum User Turn this on then click the [Start] button to transmit or receive the data of the Drum User Voice Bank. MOTIF XS Editor Owner’s Manual 49 Menu: [Help] menu 4 Progress Bar Shows how much of the data has been transmitted. 5 [Start] button After setup is completed, click the [Start] button to actually execute data transmission. 6 [Stop] button This button is available only when data transmission is being executed and allows you to cancel the transmission. [Help] menu Manual Selecting this menu calls up this manual in PDF format. About Selecting this menu calls up information such as the version number of the MOTIF XS Editor. MOTIF XS Editor Owner’s Manual 50 Menu: Auto Sync window Auto Sync window This window is used for changing the status of the Editor from “OFFLINE” to “ONLINE.” While editing a parameter on the Editor affects the same parameter on the MOTIF XS instrument and vice versa in the Online status, you can disable the “mirroring” of parameter changes between the devices by switching to Offline status. The Auto Sync window can be called up by clicking “OFFLINE” on the Editor window when the Editor is in the Offline status. The Auto Sync window can also be called up automatically (without clicking “OFFLINE”) under the following circumstances: • When opening a file. • When creating a new file by selecting “New” under the File menu. • When changing the mode on the Editor in the Online status of the Editor. • When changing the mode on the MOTIF XS instrument in the Online status of the Editor. • When the connection between the MOTIF XS and a computer are corrected after appropriately correcting the setup of the MOTIF XS and the computer. • When the settings on the MOTIF XS instrument and the computer are corrected after appropriately reconnecting the devices. n If the Auto Start parameter is set to “On” in the Auto Sync window, data synchronization may be started automatically as soon as the Auto Sync window is opened in certain conditions. For details, see page 40. On the Auto Sync window, set the Data Port properly then click [Start] button to execute data synchronization. As soon as the data synchronization is completed, the Auto Sync window is closed then the OFFLINE indication changes to ONLINE automatically. 1 4 2 5 3 6 7 8 9 1 [X] (Close) button Click this to close this window without executing data synchronization. 2 [mLAN1394]/[USB] checkboxes 3 [Detail] button 4 Port 5 Device No. 6 Auto Sync Setting These parameters are same as in the Setup window. See page 39. 7 Progress Bar 8 [Start] button 9 [Stop] button These parameters are same as in the Data Sync window. See page 50. MOTIF XS Editor Owner’s Manual 51 Troubleshooting Troubleshooting If you encounter problems such as no sound output or abnormal behavior, verify the connections before checking the following. Sound does not change when using the knobs or sliders. • Is “ONLINE” indicated on the Editor window? • Is the lamp at left of “ONLINE” indicator turned on? If it is turned off, the settings related to communication between the MOTIF XS and a computer may be wrong. Check the MIDI Port setting (page 39) on the MOTIF XS Editor and Studio Manager, the MIDI IN/OUT parameter setting in the MIDI display of the Utility mode on the MOTIF XS instrument, or the cable connection between the MOTIF XS and the computer. • Check the MIDI Port setting and Device No. setting. (page 40) Bulk data is not transmitted/received successfully. • Check the same points as above such as “ONLINE” indication and MIDI Port settings. The appropriate Port is not shown in the Setup window. • The MIDI Port in the Setup window can be selected from the Ports specified in the host application. Check the MIDI Port settings in the host application. • When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the previously used Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the host application. U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation ©2007 Yamaha Corporation 805MW-B0 MOTIF XS Editor Owner’s Manual 52
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Yamaha XS6 de handleiding

Type
de handleiding
Deze handleiding is ook geschikt voor