Huawei E8278 Snelstartgids

Quick Start

1

This guide briefly describes the appearance of the CAR WiFi and the

procedures for using the CAR WiFi. To access CAR WiFi 's web

management page, use a connected device's browser and visit

http://192.168.1.1. The default user name and password is admin.

Getting to Know Your CAR WiFi

The following figure shows the CAR

WiFi. It is provided only for your

reference. The actual product may be

different.

 USB connector

1

5

6

7

2

3

4

2

 Wi-Fi indicator

 Steady green: A Wi-Fi connection is set up.

 Off: The Wi-Fi function is turned off or fails, or the CAR WiFi has

been removed.

 SMS indicator

 Steady green: There are unread messages in your inbox.

 Blinking green once every 2s: The message storage is full.

 Off: The CAR WiFi is powered off, there are no unread messages, or

the message storage is not full.

 2G/3G/LTE indicator

 Blinking green twice every 2s: The CAR WiFi is powered on.

 Blinking green once every 0.2s: The software of the CAR WiFi is

3

being upgraded.

 Blinking green once every 2s: The CAR WiFi is registered with a 2G

network.

 Steady green: The CAR WiFi is connected to a 2G network .

 Blinking blue once every 2s: The CAR WiFi is registered with a 3G

network.

 Steady blue: The CAR WiFi is connected to a 3G network.

 Blinking cyan once every 2s: The CAR WiFi is registered with a LTE

network.

 Steady cyan: The CAR WiFi is connected to a 3G+/LTE network.

 Off: The CAR WiFi is removed.

 microSD card slot

 SIM card slot

4

 Reset button

Press and hold the Reset button for 5 seconds to restore all the settings

to factory defaults.

Installing the SIM Card

1. Slide the cover off.

2. Insert the SIM card into the card slot.

3. Slide the cover back onto the CAR WiFi until it snaps into place.

5

Inserting the microSD Card (optional)

Insert the microSD card into the CAR WiFi, as shown in the following

figure.

Note:

 Do not remove the microSD or SIM card when the card is in use.

Otherwise, the card as well as your CAR WiFi may get damaged

and the data stored on the card may be corrupted.

 Do not use any SIM card that is not

standard or is incompatible with the CAR

6

WiFi. Otherwise, the card as well as your CAR WiFi may get

damaged and the data stored on the card may be corrupted.

Connecting to Your CAR WiFi

1. Connect the CAR WiFi into the

in-car charger, and then connect

the in-car charger into your car’s

power socket.

2. Wait for the Wi-Fi indicator of the

CAR WiFi to turn on.

3. Search for wireless connections

on your device.

4. Select SSID of your CAR WiFi and

enter the Wi-Fi key.

7

Note:

 Only use in-car charger compatible with the CAR WiFi and provided

by a designated manufacturer (in-car charger: HWCC02 ).

 Wi-Fi devices, such as an iPhone, iPod touch, PS3 and NDSi, can all

access the Internet through the CAR WiFi. For specific operations,

refer to the Wi-Fi device's user manual.

 If a security mechanism is enabled for the wireless network

connection, enter the correct Wi-Fi

key.

 The SSID and the Wi-Fi key are

printed on the CAR WiFi, as shown

in the following figure.

x

xxxxxxxxxxxxxx

8

Démarrage rapide

9

Ce guide décrit succinctement l'aspect et les procédures d'utilisation du

CAR WiFi. Pour accéder à la page Web d'administration du CAR WiFi,

utilisez le navigateur d'un appareil connecté et accédez à

http://192.168.1.1. Le nom d'utilisateur et le mot de passe par défaut

sont admin.

Découvrir le CAR WiFi

L'illustration suivante montre le CAR

WiFi. Elle n'est fournie qu'à titre de

référence. Le produit réel peut être

différent.



Connecteur USB

1

5

6

7

2

3

4

10



Voyant Wi-Fi



Vert fixe : une connexion Wi-Fi est configurée.



Éteint : le Wi-Fi est désactivé ou en échec, ou le CAR WiFi a été

retiré.



Voyant SMS



Vert fixe : votre boîte de réception contient des messages non lus.



Vert clignotant une fois toutes les 2 secondes : l'espace de stockage

des messages est plein.



Éteint : le CAR WiFi est éteint, il n'y a pas de messages non lus ou

l'espace de stockage des messages n'est pas plein.



Voyant 2G/3G/LTE



Vert clignotant deux fois toutes les 2 secondes : le CAR WiFi est

allumé.

11



Vert clignotant une fois toutes les 0,2 seconde : le logiciel du CAR

WiFi est en cours de mise à niveau.



Vert clignotant une fois toutes les 2 secondes : le CAR WiFi

s’enregistre auprès d'un réseau 2G.



Vert fixe : le CAR WiFi est connecté à un réseau 2G.



Bleu clignotant une fois toutes les 2 secondes : le CAR WiFi

s’enregistre auprès d'un réseau 3G.



Bleu fixe : le CAR WiFi est connecté à un réseau 3G.



Cyan clignotant une fois toutes les 2 secondes : le CAR WiFi

s’enregistre auprès d'un réseau LTE.



Cyan fixe : le CAR WiFi est connecté à un réseau 3G+/LTE.



Éteint : le CAR WiFi a été retiré.



Emplacement de la carte microSD

12



Emplacement de la carte SIM



Bouton Reset (Réinitialiser)

Appuyez pendant cinq secondes sur le bouton Reset (Réinitialiser) pour

restaurer tous les paramètres d'usine par défaut.

Installer la carte SIM

5.

Faites glisser le cache.

6.

Insérez la carte SIM dans son emplacement.

7.

Refaites glisser le cache sur le CAR WiFi jusqu'à ce qu'il s'enclenche.

13

Insérer la carte microSD (facultatif)

Insérez la carte microSD dans le CAR WiFi comme sur l'illustration

suivante.

Remarque :



Ne retirez pas la carte microSD ou la carte SIM lorsque la carte est

en cours d'utilisation. La carte et le CAR WiFi risqueraient de subir

des dommages et les données stockées sur la carte risqueraient

d'être endommagées.

14



N'utilisez pas de carte SIM non conforme ou incompatible avec le

CAR WiFi La carte et le CAR WiFi

risqueraient de subir des dommages et

les données stockées sur la carte

risqueraient d'être endommagées.

Se connecter à votre CAR

WiFi

1.

Connectez le CAR WiFi au

chargeur de voiture, puis

connectez ce dernier à la prise

électrique de votre véhicule.

2.

Attendez que le voyant Wi-Fi du

CAR WiFi s'allume.

15

3.

Recherchez des connexions sans fil sur votre appareil.

4.

Sélectionnez le SSID de votre CAR WiFi et entrez la clé Wi-Fi.

Remarque :



Utilisez exclusivement un chargeur de voiture compatible avec le CAR

WiFi et fourni par un fabricant désigné (chargeur de voiture :

HWCC02).



Les appareils Wi-Fi (iPhone, iPod Touch, PS3 et NDSi) peuvent tous

accéder à Internet via le CAR WiFi. Pour une utilisation spécifique,

reportez-vous au manuel de l'utilisateur de l'appareil Wi-Fi.



Si un mécanisme de sécurité est activé

pour la connexion au réseau sans fil,

entrez la clé Wi-Fi adéquate.



Le SSID et la clé Wi-Fi sont imprimés sur

le CAR WiFi (voir l'illustration suivante).

x

xxxxxxxxxxxxxx

16

Kurzanleitung

17

Dieses Handbuch enthält eine Gerätebeschreibung des CAR WiFi und

erklärt die Vorgehensweise für die Verwendung des CAR WiFi. Um die

Web-Verwaltungsseite des CAR WiFi aufzurufen, verwenden Sie den

Browser eines verbundenen Gerätes und rufen Sie http://192.168.1.1

auf. Der Standardbenutzername und das Kennwort lauten admin.

Überblick über das CAR WiFi

Die folgende Abbildung zeigt das CAR

WiFi. Sie dient nur zu Ihrer Information.

Das tatsächliche Produkt kann davon

abweichen.

 USB-Anschluss

1

5

6

7

2

3

4

18

 WLAN-Anzeige

 Leuchtet grün: Es wird eine WLAN-Verbindung hergestellt.

 Aus: Die WLAN-Funktion ist ausgeschaltet oder ausgefallen oder das

CAR WiFi wurde entfernt.

 SMS-Anzeige

 Leuchtet grün dauerhaft: Es befinden sich ungelesene Nachrichten in

Ihrem Posteingang.

 Grün, blinkt einmal alle 2 Sekunden: Der Nachrichtenspeicher ist voll.

 Aus: Das CAR WiFi ist ausgeschaltet, es liegen keine ungelesenen

Nachrichten vor oder der Nachrichtenspeicher ist nicht voll.

 2G/3G/LTE-Anzeige

 Grün, blinkt zweimal alle 2 Sekunden: Das CAR WiFi ist eingeschaltet.

 Grün, blinkt einmal alle 0,2 Sekunden: Die Software des CAR WiFi

19

wird aktualisiert.

 Grün, blinkt einmal alle 2 Sekunden: Das CAR WiFi ist bei einem

2G-Netzwerk registriert.

 Leuchtet grün: Das CAR WiFi ist mit einem 2G-Netzwerk verbunden.

 Blau, blinkt einmal alle 2 Sekunden: Das CAR WiFi ist bei einem

3G-Netzwerk registriert.

 Leuchtet blau: Das CAR WiFi ist mit einem 3G-Netzwerk verbunden.

 Cyan, blinkt einmal alle 2 Sekunden: Das CAR WiFi ist bei einem

LTE-Netzwerk registriert.

 Leuchtet cyan: Das CAR WiFi ist mit einem 3G+/LTE-Netzwerk verbunden.

 Aus: Das CAR WiFi wurde entfernt.

 microSD-Kartenslot

 SIM-Kartensteckplatz

20

 Reset-Taste

Drücken und halten Sie die Reset-Taste für 5 Sekunden, um alle

Einstellungen auf die Werkseinstellungen zurückzusetzen.

Einsetzen der SIM-Karte

1. Schieben Sie die Abdeckung wie abgebildet zurück.

2. Setzen Sie die SIM-Karte in den Steckplatz ein.

3. Schieben Sie die Abdeckung wieder auf das CAR WiFi; sie muss

einrasten.

21

Einsetzen der microSD-Karte (optional)

Setzen Sie die microSD-Karte in das CAR WiFi ein, wie in der folgenden

Abbildung dargestellt.

Hinweis:

 Entfernen Sie die microSD- oder die SIM-Karte nicht, wenn auf die

Karte zugegriffen wird. Dies kann zur

Beschädigung Ihrer Karte, Ihres CAR

WiFi, sowie der auf der Karte

gespeicherten Daten führen.

22

 Verwenden Sie nur Standard-SIM-Karten oder solche, die mit dem

CAR WiFi kompatibel sind. Anderenfalls können die Karte sowie Ihr

CAR WiFi beschädigt werden und es kann zu einer Beschädigung

der auf der Karte gespeicherten Daten kommen.

Anschluss des CAR WiFi

1. Verbinden Sie das CAR WiFi mit

dem Kfz-Ladegerät und schließen

Sie das Kfz-Ladegerät an den

Zigarettenanzünder Ihres Autos

an.

2. Warten Sie, bis die

WLAN-Anzeige des CAR WiFi

leuchtet.

23

3. Suchen Sie nach Drahtlosverbindungen auf Ihrem Gerät.

4. Wählen Sie die SSID Ihres CAR WiFi und geben Sie den

WLAN-Schlüssel ein.

Hinweis:

 Verwenden Sie nur Kfz-Ladegeräte, die mit dem CAR WiFi

kompatibel sind und von einem empfohlenen Hersteller bezogen

wurden (Kfz-Ladegerät: HWCC02).

 WLAN-Geräte wie iPhone, iPod Touch, PS3 und NDSi können

ebenfalls über das CAR WiFi auf das Internet zugreifen.

Informationen zur genauen Vorgehensweise finden Sie in der

Bedienungsanleitung des jeweiligen WLAN-Gerätes.

 Falls ein Sicherheitsmechanismus für die drahtlose

Netzwerkverbindung aktiviert ist, geben Sie den korrekten

WLAN-Schlüssel ein.

24

 Die SSID und der WLAN-Schlüssel sind wie in der folgenden

Abbildung dargestellt auf dem CAR WiFi aufgedruckt.

x

xxxxxxxxxxxxxx

25

Avvio rapido

26

Questa guida descrive brevemente l'aspetto di CAR WiFi e le procedure

per il suo utilizzo. Per accedere alla pagina di gestione Web di CAR WiFi,

usare un browser del dispositivo connesso e visitare http://192.168.1.1.

Il nome utente e la password predefiniti sono entrambi admin.

Cenni generali su CAR WiFi

La figura riportata di seguito mostra

CAR WiFi ad esclusivo scopo di

riferimento. Il prodotto reale

potrebbe essere diverso.

 Connettore USB

1

5

6

7

2

3

4

27

 Indicatore Wi-Fi

 Verde fisso: è impostata una connessione Wi-Fi.

 Spento: la funzione Wi-Fi è disattivata o non funziona o CAR WiFi è

stato rimosso.

 Indicatore SMS

 Verde fisso: ci sono messaggi da leggere nella casella di posta in

arrivo.

 Verde, lampeggiante una volta ogni 2 sec.: archiviazione messaggi

piena.

 Spento: CAR WiFi è spento, non ci sono messaggi da leggere o

l'archiviazione messaggi non è piena.

28

 Indicatore 2G/3G/ LTE

 Verde, lampeggiante due volte ogni 2 sec.: CAR WiFi è stato acceso.

 Verde, lampeggiante una volta ogni 0,2 sec.: il software di CAR WiFi

è in aggiornamento.

 Verde, lampeggiante una volta ogni 2 sec.: CAR WiFi si sta

registrando su una rete 2G.

 Verde fisso: CAR WiFi è connesso a una rete 2G.

 Blu, lampeggiante una volta ogni 2 sec.: CAR WiFi si sta registrando

su una rete 3G.

 Blu fisso: CAR WiFi è connesso a una rete 3G.

 Ciano, lampeggiante una volta ogni 2 sec.: CAR WiFi si sta

registrando su una rete LTE.

 Ciano fisso: CAR WiFi è connesso a una rete 3G+/LTE.

 Spento: CAR WiFi è stato rimosso.

29

 Slot scheda microSD

 Slot scheda SIM

 Pulsante Reimposta (Reset)

Tenere premuto il pulsante Reimposta (Reset) per 5 secondi per

ripristinare tutte le impostazioni su quelle predefinite di fabbrica.

Installazione della scheda SIM

1. Togliere il coperchio facendolo scorrere.

2. Inserire la scheda SIM nell'apposito slot.

3. Riposizionare il coperchio su CAR WiFi finché non scatta in posizione.

30

Inserire la scheda microSD (opzionale)

Inserire la scheda microSD in CAR WiFi, come illustrato nella figura

seguente.

31

Nota:

 non rimuovere la scheda microSD o SIM quando è in uso. In caso

contrario, la scheda e CAR WiFi

potrebbero subire danni, così come i

dati archiviati sulla scheda.

 Non usare schede SIM non standard

o incompatibili con CAR WiFi. In caso contrario, la scheda e CAR

WiFi potrebbero subire danni, così come i dati archiviati sulla

scheda.

32

Collegamento a CAR WiFi

1. Collegare CAR WiFi al caricatore

per auto, quindi collegare il

caricatore alla presa di corrente

dell'auto.

2. Attendere che l'indicatore Wi-Fi di

CAR WiFi si accenda.

3. Cercare connessioni wireless sul

dispositivo.

4. Selezionare l'identificativo SSID di

CAR WiFi e immettere la chiave

Wi-Fi.

33

Nota:

 usare solo un caricatore per auto compatibile con CAR WiFi e fornito

da un produttore qualificato (caricatore per auto: HWCC02).

 Attraverso CAR WiFi possono accedere a Internet i dispositivi Wi-Fi,

quali ad esempio iPhone, iPod Touch, PS3 e NDSi. Per istruzioni

specifiche, consultare il manuale utente del dispositivo Wi-Fi.

 Se è attivato un meccanismo di

sicurezza per la connessione di rete

wireless, immettere la chiave Wi-Fi

corretta.

 L'identificativo SSID e la chiave Wi-Fi

sono stampati su CAR Wi-Fi, come

illustrato nella figura che segue.

x

xxxxxxxxxxxxxx

34

Snelstartgids

35

Deze gids omschrijft beknopt het voorkomen van de CAR WiFi en de

procedures voor het gebruik van de CAR WiFi. Voor toegang tot de

internetbeheerpagina van CAR WiFi, gebruikt u de zoekmachine van

een verbonden toestel en surft u naar http://192.168.1.1. De standaard

gebruikersnaam en het wachtwoord is admin.

Aan de slag met uw CAR WiFi

De volgende afbeelding toont de CAR

WiFi. Deze is louter ter referentie. Het

eigenlijke product kan afwijken.



USB-aansluiting

1

5

6

7

2

3

4

36



Wi-Fi-lampje



Constant groen: Een Wi-Fi-verbinding is ingesteld.



Uit: Wi-Fi is uitgeschakeld of defect, of de CAR WiFi werd verwijderd.



SMS-lampje



Constant groen: Er bevinden zich ongelezen berichten in uw Postvak

IN.



Knippert om de 2 sec groen: Het berichtgeheugen is vol.



Uit: De CAR WiFi is uitgeschakeld, er zijn geen ongelezen berichten

meer of het berichtgeheugen is niet vol.



2G/3G/LTE-lampje



Knippert om de 2 sec tweemaal groen: De CAR WiFi is ingeschakeld.



Knippert om de 0,2 sec groen: De software van de CAR WiFi wordt

geüpdatet.

37



Knippert om de 2 sec groen: De CAR WiFi is geregistreerd met een

2G-netwerk.



Constant groen: De CAR WiFi is verbonden met een 2G-netwerk.



Knippert om de 2 sec blauw: De CAR WiFi is geregistreerd met een

3G-netwerk.



Constant blauw: De CAR WiFi is verbonden met een 3G-netwerk.



Knippert om de 2 sec cyaan: De CAR WiFi is geregistreerd met een

LTE-netwerk.



Constant cyaan: De CAR WiFi is verbonden met een

3G+/LTE-netwerk.



Uit: De CAR WiFi is verwijderd.



microSD-kaartsleuf



SIM-kaartsleuf

38



Reset-knop

Houd de Reset-knop gedurende 5 seconden ingedrukt om de standaard

fabrieksinstellingen terug te zetten.

De SIM-kaart plaatsen

1.

Verwijder het deksel.

2.

Plaats de SIM-kaart in de kaartsleuf.

3.

Plaats het deksel opnieuw op de CAR WiFi tot deze op zijn plaats

klikt.

39

De microSD-kaart plaatsen (optioneel)

Plaats de microSD-kaart in de CAR WiFi, zoals getoond op de volgende

afbeelding.

Opmerking:



Verwijder de microSD- of SIM-kaart niet wanneer de kaart in

gebruik is. Anders kan zowel de kaart

als uw CAR WiFi beschadigd worden

en kunnen de gegevens op uw kaart

verloren gaan.

40



Gebruik geen SIM-kaart die niet standaard is of die niet compatibel

is met de CAR WiFi. Anders kan zowel de kaart als uw CAR WiFi

beschadigd worden en kunnen de gegevens op uw kaart verloren

gaan.

Verbinden met uw CAR WiFi

1.

Sluit de CAR WiFi aan op de lader in

de wagen en sluit dan de lader in

de wagen aan op de

sigarettenaansteker van uw wagen.

2.

Wacht tot het Wi-Fi-lampje van de

CAR WiFi gaat branden.

3.

Zoek naar draadloze verbindingen

op uw toestel.

41

4.

Selecteer SSID van uw CAR WiFi en voer de Wi-Fi-code in.

Opmerking:



Gebruik enkel een lader voor in de wagen die compatibel is met de

CAR WiFi en die verschaft werd door een aangewezen fabrikant

(lader voor in de wagen: HWCC02 ).



Wi-Fi-toestellen, zoals een iPhone, iPod touch, PS3 en NDSi, kunnen

toegang krijgen tot het internet via de CAR WiFi. Voor specifieke

acties, zie de handleiding van het Wi-Fi-toestel.



Voer de juiste Wi-Fi-code in wanneer een

beveiligingsmechanisme is ingeschakeld

voor de draadloze netwerkverbinding.



De SSID en de WiFi-code staan gedrukt op

de CAR WiFi, zoals getoond op de

volgende afbeelding.

x

xxxxxxxxxxxxxx

42

Início rápido

43

Este guia descreve sucintamente o aspecto do CAR WiFi e os

procedimentos para utilizar o CAR WiFi. Para aceder à página de gestão

Web do CAR WiFi, utilize o browser de um dispositivo ligado e visite

http://192.168.1.1. O nome de utilizador e a palavra-passe predefinidos

são ambos admin.

Introdução ao CAR WiFi

A figura seguinte mostra o CAR WiFi. É

fornecida apenas para sua referência.

O produto real poderá diferir

ligeiramente da imagem.

 Ficha USB

1

5

6

7

2

3

4

44

 Indicador Wi-Fi

 Verde constante: Está configurada uma ligação Wi-Fi.

 Apagado: a função Wi-Fi está desligada ou falha, ou o CAR WiFi foi

removido.

 Indicador de SMS

 Verde constante: Existem mensagens não lidas na sua caixa de

entrada.

 Verde intermitente a cada 2 segundos: A caixa de mensagens está

cheia.

 Apagado: o CAR WiFi está desligado, não existem mensagens não

lidas ou a caixa de mensagens não está cheia.

 Indicador 2G/3G/LTE

 Verde com duas intermitências a cada 2 segundos: o CAR WiFi está

45

ligado à corrente.

 Verde intermitente a cada 0,2 segundos: o software do CAR WiFi

está em actualização.

 Verde intermitente a cada 2 segundos: o CAR WiFi está registado

numa rede 2G.

 Verde contínuo: o CAR WiFi está ligado a uma rede 2G.

 Azul intermitente a cada 2 segundos: o CAR WiFi está registado

numa rede 3G.

 Azul contínuo: o CAR WiFi está ligado a uma rede 3G.

 Ciano intermitente a cada 2 segundos: o CAR WiFi está registado

numa rede LTE.

 Ciano contínuo: o CAR WiFi está ligado a uma rede 3G+/LTE.

 Apagado: o CAR WiFi foi removido.

 Entrada do cartão microSD

 Entrada do cartão SIM

46

 Botão Reiniciar

Prima continuamente o botão Reiniciar durante 5 segundos para

restaurar as predefinições de fábrica.

Colocar o cartão SIM

1. Deslize a tampa para a retirar.

2. Insira o cartão SIM na entrada de cartões.

3. Volte a deslizar a tampa para a respectiva posição no CAR WiFi até

encaixar.

47

Inserir o cartão microSD (opcional)

Insira o cartão microSD no CAR WiFi tal como indicado na figura

seguinte.

Nota:

 Não retire o cartão microSD ou SIM quando em uso. Caso

contrário, o cartão e o CAR WiFi

poderão ficar danificados e os dados

armazenados no cartão corrompidos.

48

 Não utilize nenhum cartão SIM que não seja padrão ou

incompatível com o CAR WiFi. Caso contrário, o cartão e o CAR

WiFi poderão ficar danificados e os dados armazenados no cartão

corrompidos.

Ligar ao CAR WiFi

1. Ligue o CAR WiFi ao carregador do

automóvel e em seguida ligue o

carregador do automóvel à tomada

de alimentação do automóvel.

2. Aguarde que o indicador Wi-Fi do

CAR WiFi se acenda.

3. Procure ligações sem fios para o

dispositivo.

49

4. Seleccione o SSID do CAR WiFi e introduza a chave Wi-Fi.

Nota:

 Utilize apenas o carregador do automóvel compatível com o CAR

WiFi e indicado por um fabricante designado (carregador do

automóvel (in-car charger): HWCC02).

 Os dispositivos Wi-Fi, tais como o iPhone, iPod touch, PS3 e NDSi,

podem todos aceder à Internet através do CAR WiFi. Para consultar

operações específicas, consulte o manual do

utilizador do dispositivo Wi-Fi.

 Caso esteja activado algum mecanismo de

segurança para a ligação a uma rede sem fios,

introduza a chave Wi-Fi correcta.

 O SSID e a chave Wi-Fi estão impressos no

CAR WiFi, conforme indicado na figura seguinte.

x

xxxxxxxxxxxxxx

50

Guía de inicio

rápido

51

Este guía describe brevemente el aspecto del CAR WiFi y cómo utilizarlo.

Para acceder a la página de administración web del CAR WiFi, utilice el

navegador del dispositivo conectado para acceder a http://192.168.1.1.

El nombre de usuario y la contraseña predeterminados son admin.

Información del CAR WiFi

La siguiente figura muestra el CAR

WiFi. Se proporciona únicamente con

fines de referencia. El producto

adquirido puede presentar ciertas

diferencias.

 Conector USB

1

5

6

7

2

3

4

52

 Indicador de Wi-Fi

 Verde sin parpadear: Se estableció una conexión Wi-Fi.

 Apagado: La función Wi-Fi está desactivada o presenta fallos, o se ha

extraído el CAR WiFi.

 Indicador de SMS

 Verde sin parpadear: Hay mensajes sin leer en la bandeja de entrada.

 Verde parpadeante una vez cada 2 s: Memoria de mensajes llena.

 Apagado: El CAR WiFi está apagado, no hay mensajes sin leer o la

memoria de mensajes no está llena.

 Indicador 2G/3G/LTE

 Verde parpadeante dos veces cada 2 s: El CAR WiFi está encendido.

 Verde parpadeante una vez cada 0,2 s: El software del CAR WiFi se

53

está actualizando.

 Verde parpadeante una vez cada 2 s: El CAR WiFi se está registrando

en una red 2G.

 Verde sin parpadear: El CAR WiFi está conectado a una red 2G.

 Azul parpadeante una vez cada 2 s: El CAR WiFi se está registrando

en una red 3G.

 Azul sin parpadear: El CAR WiFi está conectado a una red 3G.

 Cian parpadeante una vez cada 2 s: El CAR WiFi se está registrando

en una red LTE.

 Cian sin parpadear: El CAR WiFi está conectado a una red 3G+/LTE.

 Apagado: Se extrajo el CAR WiFi.

 Ranura para tarjeta microSD

 Ranura para tarjeta SIM

54

 Botón Reset

Mantenga pulsado el botón Reset durante 5 segundos para restablecer

los valores de fábrica de los ajustes.

Instalación de la tarjeta SIM

1. Retire la tapa.

2. Inserte la tarjeta SIM en la ranura correspondiente.

3. Vuelva a colocar la tapa del CAR WiFi, deslizándola hasta que

encastre en su lugar.

55

Cómo insertar la tarjeta microSD (opcional)

Introduzca la tarjeta microSD en el CAR WiFi, como se muestra en la

siguiente figura.

Nota:

 No extraiga las tarjetas microSD ni SIM cuando estén en uso. Si lo

hace, se podrían dañar la tarjeta, el CAR WiFi y los datos

almacenados en la tarjeta.

 No utilice tarjetas SIM que no sean

estándares o compatibles con el CAR WiFi.

56

Si lo hace, se podrían dañar la tarjeta, el CAR WiFi y los datos

almacenados en la tarjeta.

Cómo conectarse al CAR WiFi

1. Conecte el CAR WiFi al cargador de

automóvil y conecte el cargador a la

toma del vehículo.

2. Espere hasta que el indicador de Wi-Fi

del CAR WiFi se encienda.

3. Busque las conexiones inalámbricas en

su dispositivo.

4. Seleccione el SSID del CAR WiFi e

introduzca la clave de Wi-Fi.

57

Nota:

 Solo utilice cargadores para automóvil compatibles con el CAR WiFi y

suministrados por el fabricante correspondiente (cargador para

automóvil: HWCC02).

 Los dispositivos Wi-Fi, como iPhone, iPod touch, PS3 y NDSi, pueden

acceder a Internet a través del CAR WiFi. Para operaciones

específicas, consulte el manual del usuario del dispositivo Wi-Fi.

 Si hay algún mecanismo de seguridad

habilitado para la conexión de red

inalámbrica, introduzca la clave de Wi-Fi

correcta.

 El SSID y la clave de Wi-Fi se encuentran

impresos en el CAR WiFi, tal como se

muestra en la siguiente figura.

x

xxxxxxxxxxxxxx

58

Safety Information

59

rights reserved.

No part of this manual may be reproduced or transmitted in any form or

by any means without prior written consent of Huawei Technologies

Co., Ltd. and its affiliates ("Huawei").

The product described in this manual may include copyrighted software

of Huawei and possible licensors. Customers shall not in any manner

reproduce, distribute, modify, decompile, disassemble, decrypt, extract,

reverse engineer, lease, assign, or sublicense the said software, unless

such restrictions are prohibited by applicable laws or such actions are

approved by respective copyright holders.

60

Trademarks and Permissions

, , and are trademarks or registered

trademarks of Huawei Technologies Co., Ltd.

LTE is a trademark of ETSI.

Other trademarks, product, service and company names mentioned

may be the property of their respective owners.

Notice

Some features of the product and its accessories described herein rely

on the software installed, capacities and settings of local network, and

therefore may not be activated or may be limited by local network

operators or network service providers.

61

Thus, the descriptions herein may not exactly match the product or its

accessories which you purchase.

Huawei reserves the right to change or modify any information or

specifications contained in this manual without prior notice and without

any liability.

DISCLAIMER

ALL CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS

REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND,

EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,

RELIABILITY OR CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO

EVENT SHALL HUAWEI BE LIABLE FOR ANY SPECIAL, INCIDENTAL,

62

INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS,

BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED

SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE

OR NOT.

THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO

LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW

PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING FROM THE USE

OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO

THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS

PRODUCT.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and

regulations and be responsible to obtain all necessary governmental

permits and licenses in order to export, re-export or import the product

63

mentioned in this manual including the software and technical data

therein.

Privacy Policy

To better understand how we protect your personal information, please

see the privacy policy at http://consumer.huawei.com/privacy-policy.

Safety information

This section contains important information about the operation of your

device. It also contains information about how to use the device safely.

Read this information carefully before using your device.

Electronic device

Do not use your device if using the device is prohibited. Do not use the

device if doing so causes danger or interference with other electronic

64

devices.

Interference with medical equipment

 Follow rules and regulations set forth by hospitals and health care

facilities. Do not use your device where prohibited.

 Some wireless devices may affect the performance of hearing aids or

pacemakers. Consult your service provider for more information.

 Pacemaker manufacturers recommend that a minimum distance of

15 cm be maintained between a device and a pacemaker to prevent

potential interference with the pacemaker. If using a pacemaker,

hold the device on the side opposite the pacemaker and do not carry

the device in your front pocket.

65

Areas with flammables and explosives

 Do not use the device where flammables or explosives are stored (in

a gas station, oil depot, or chemical plant, for example). Using your

device in these environments increases the risk of explosion or fire. In

addition, follow the instructions indicated in text or symbols.

 Do not store or transport the device in containers with flammable

liquids, gases, or explosives.

Traffic security

 Observe local laws and regulations while using the device. To reduce

the risk of accidents, do not use your wireless device while driving.

 Concentrate on driving. Your first responsibility is to drive safely.

 RF signals may affect the electronic systems of motor vehicles. For

more information, consult the vehicle manufacturer.

66

 Do not place the device over the air bag or in the air bag deployment

area in a motor vehicle. Doing so may hurt you because of the

strong force when the air bag inflates.

 Do not use your device while flying in an aircraft or immediately

before boarding. Using wireless devices in an aircraft may disrupt

wireless networks, present a hazard to aircraft operation, or be

illegal.

Operating environment

 Avoid dusty, damp, or dirty environments. Avoid magnetic fields.

Using the device in these environments may result in circuit

malfunctions.

 Do not use your device during thunderstorms to protect your device

against any danger caused by lightning.

67

 Ideal operating temperatures are -10 °C to +40 °C. Ideal storage

temperatures are -20 °C to +70 °C. Extreme heat or cold may

damage your device or accessories.

 Keep the device and accessories in a well-ventilated and cool area

away from direct sunlight. Do not enclose or cover your device with

towels or other objects. Do not place the device in a container with

poor heat dissipation, such as a box or bag.

 Do not expose your device to direct sunlight (such as on a car

dashboard) for prolonged periods.

 To protect your device or accessories from fire or electrical shock

hazards, avoid rain and moisture.

 Keep the device away from sources of heat and fire, such as a heater,

microwave oven, stove, water heater, radiator, or candle.

68

 Stop using your device or applications for a while if the device is

overheated. If skin is exposed to an overheated device for an

extended period, low temperature burn symptoms, such as red spots

and darker pigmentation, may occur.

 Do not touch the device's antenna. Otherwise, communication

quality may be reduced.

 Do not allow children or pets to bite or suck the device or

accessories. Doing so may result in damage or explosion.

 Observe local laws and regulations, and respect the privacy and legal

rights of others.

Child's safety

 Comply with all precautions with regard to child's safety. Letting

children play with the device or its accessories may be dangerous.

69

The device includes detachable parts that may present a choking

hazard. Keep away from children.

 The device and its accessories are not intended for use by children.

Children should only use the device with adult supervision.

Accessories

 Using an unapproved or incompatible power adapter, charger or

battery may cause fire, explosion or other hazards.

 Choose only accessories approved for use with this model by the

device manufacturer. The use of any other types of accessories may

void the warranty, may violate local regulations and laws, and may

be dangerous. Please contact your retailer for information about the

availability of approved accessories in your area.

70

Power adapter safety

 The power plug is intended to serve as a disconnect device.

 For pluggable devices, the socket-outlet shall be installed near the

devices and shall be easily accessible.

 Unplug the power adapter from electrical outlets and the device

when not in use.

 Do not drop or cause an impact to the power adapter. If it is

damaged, take it to an authorized service center for inspection.

 If the power cable is damaged (for example, the cord is exposed or

broken), or the plug loosens, stop using it at once. Continued use

may lead to electric shocks, short circuits, or fire.

 Do not touch the power cord with wet hands or pull the power cord

to disconnect the power adapter.

71

 Do not touch the device or the power adapter with wet hands.

Doing so may lead to short circuits, malfunctions, or electric shocks.

 If your power adapter has been exposed to water, other liquids, or

excessive moisture, take it to an authorized service center for

inspection.

 Ensure that the power adapter meets the requirements of Clause 2.5

in IEC60950-1/EN60950-1/UL60950-1 and has been tested and

approved according to national or local standards.

Cleaning and maintenance

 Keep the device and accessories dry. Do not attempt to dry it with an

external heat source, such as a microwave oven or hair dryer.

 Do not expose your device or accessories to extreme heat or cold.

These environments may interfere with proper function and may lead

to fire or explosion.

72

 Avoid collision, which may lead to device malfunctions, overheating,

fire, or explosion.

 Before you clean or maintain the device, stop using it, stop all

applications, and disconnect all cables connected to it.

 Do not use any chemical detergent, powder, or other chemical

agents (such as alcohol and benzene) to clean the device or

accessories. These substances may cause damage to parts or present

a fire hazard. Use a clean, soft, and dry cloth to clean the device and

accessories.

 Do not place magnetic stripe cards, such as credit cards and phone

cards, near the device for extended periods of time. Otherwise the

magnetic stripe cards may be damaged.

 Do not dismantle or remanufacture the device and its accessories.

This voids the warranty and releases the manufacturer from liability

73

for damage. In case of damage, contact an authorized service center

for assistance or repair.

Disposal and recycling information

This symbol (with or without a solid bar) on the device,

batteries (if included), and/or the packaging, indicates that the device

and its electrical accessories (for example, a headset, adapter, or cable)

and batteries should not be disposed of as household garbage. These

items should not be disposed of as unsorted municipal waste and

should be taken to a certified collection point for recycling or proper

disposal.

74

For more detailed information about device or battery recycling, contact

your local city office, household waste disposal service, or retail store.

Disposal of the device and batteries (if included) is subject to WEEE

Directive Recast (Directive 2012/19/EU) and Battery Directive (Directive

2006/66/EC). The purpose of separating WEEE and batteries from other

waste is to minimize the potential environmental impacts and human

health risk of any hazardous substances that may be present.

Reduction of hazardous substances

This device is compliant with the REACH Regulation [Regulation (EC) No

1907/2006] and RoHS Directive Recast (Directive 2011/65/EU). Batteries

(if included) are compliant with the Battery Directive (Directive

2006/66/EC). For up-to-date information about REACH and RoHS

compliance, please visit the web site

http://consumer.huawei.com/certification.

75

EU regulatory conformance

RF exposure requirements

Important safety information regarding radio frequency (RF) radiation

exposure:

RF exposure guidelines require that the device be used at a minimum of

1.5 cm from the human body. Failure to observe this guideline may

result in RF exposure exceeding limits.

Certification information (SAR)

This device meets guidelines for exposure to radio waves.

Your device is a low-power radio transmitter and receiver. As

recommended by international guidelines, the device is designed not to

exceed the limits for exposure to radio waves. These guidelines were

developed by the International Commission on Non-Ionizing Radiation

Protection (ICNIRP), an independent scientific organization, and include

76

safety measures designed to ensure the safety of all users, regardless of

age and health.

The Specific Absorption Rate (SAR) is the unit of measurement for the

amount of radio frequency energy absorbed by the body when using a

device. The SAR value is determined at the highest certified power level

in laboratory conditions, but the actual SAR level during operation can

be well below the value. This is because the device is designed to use

the minimum power required to reach the network.

The SAR limit adopted by Europe is 2.0 W/kg averaged over 10 grams of

tissue, and the highest SAR value for this device complies with this limit.

Statement

Hereby, Huawei Technologies Co., Ltd. declares that this device is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

77

For the declaration of conformity, visit the web site

http://consumer.huawei.com/certification.

The following marking is included in the product:

This device may be operated in all member states of the EU.

Observe national and local regulations where the device is used.

This device may be restricted for use, depending on the local network.

Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical area

within a radius of 20 km from the centre of Ny-Ålesund.

Please visit http://consumer.huawei.com/en/support/hotline for recently

updated hotline and email address in your country or region.

78

Informations relatives à la

sécurité

 Les températures d'utilisation idéales sont entre -10°C et +40°C. Les

températures de stockage idéales sont entre -20°C et +70°C. Des

températures extrêmement froides ou chaudes peuvent

endommager votre appareil ou les accessoires.

 Conservez l'appareil et les accessoires dans un endroit bien aéré et

frais, à l'écart des rayons directs du soleil. N'enveloppez pas et ne

recouvrez pas votre appareil de serviettes ou d'autres objets. Ne

placez pas l'appareil dans un récipient ayant une faible capacité de

dissipation thermique, comme par exemple une boîte ou un sac.

79

 Conservez l'appareil à l'écart des sources de chaleur et de flammes,

telles qu'un radiateur, un four à micro-ondes, une cuisinière, une

bouilloire ou une bougie.

 L'utilisation d'un adaptateur d'alimentation, d'un chargeur ou d'une

batterie non approuvé(e) ou incompatible peut entraîner un incendie,

une explosion ou d'autres dangers.

 Seuls les accessoires approuvés par le fabricant de l'appareil pour

une utilisation avec ce modèle peuvent être utilisés. L'utilisation de

tout autre type d'accessoires peut entraîner la nullité de la garantie,

enfreindre les règlementations et lois locales et être dangereuse.

Veuillez contacter votre détaillant pour obtenir plus d'informations

sur la disponibilité, près de chez vous, d'accessoires agréés.

 La fiche d'alimentation est conçue pour réaliser les débranchements.

80

 Pour les appareils enfichables, la prise de courant doit être installée

près des appareils et être facile d'accès.

 Par la présente, Huawei Technologies Co., Ltd. déclare que cet

appareil est conforme aux exigences fondamentales et aux autres

dispositions pertinentes de la directive 1999/5/CE.

81

Sicherheitsinformationen

 Die optimale Betriebstemperatur ist -10 °C bis +40 °C. Die optimale

Lagerungstemperatur ist -20 °C bis +70 °C. Extreme Hitze oder Kälte

kann Ihr Gerät oder das Zubehör beschädigen.

 Bewahren Sie das Gerät und das Zubehör in einem gut belüfteten

und kühlen Bereich fern von direkter Sonneneinstrahlung auf.

Umhüllen oder bedecken Sie Ihr Gerät nicht mit Handtüchern oder

anderen Objekten. Platzieren Sie das Gerät nicht in einem Behälter

mit einer schlechten Wärmeableitung, wie beispielsweise in eine

Schachtel oder Tasche.

82

 Halten Sie das Gerät fern von Hitzequellen und offenen Flammen,

wie z. B. einem Heizgerät, einer Mikrowelle, einem Herd, einem

Wassererhitzer, einer Heizung oder einer Kerze.

 Durch die Verwendung eines unzulässigen oder inkompatiblen

Netzadapters, Ladegeräts oder Akkus kann es zu einem

Feuerausbruch, einer Explosion oder zu anderen Gefahren kommen.

 Verwenden Sie nur Zubehör, das vom Gerätehersteller für dieses

Modell zugelassen ist. Die Verwendung von anderem Zubehör kann

dazu führen, dass die Garantie erlischt, sie kann gegen lokale

Vorschriften und Gesetze verstoßen und sie kann gefährlich sein.

Informationen zur Verfügbarkeit des zugelassenen Zubehörs in Ihrer

Region erhalten Sie bei Ihrem Fachhändler.

 Der Netzstecker dient als Trennvorrichtung.

83

 Für Geräte mit Stecker sollte sich die Steckdose in unmittelbarer

Nähe der Geräte befinden und leicht zugänglich sein.

 Huawei Technologies Co., Ltd. erklärt hiermit, dass dieses Geräts den

wesentlichen Anforderungen und anderen relevanten Bestimmungen

der Richtlinie 1999/5/EG entspricht.

84

Informazioni sulla sicurezza

 La temperatura di funzionamento ideale varia da -10°C a +40°C. La

temperatura di conservazione ideale varia da -20°C a +70°C.

Condizioni estreme di calore o freddo possono danneggiare il

dispositivo e gli accessori.

 Tenere il dispositivo e gli accessori in un'area fresca e ben ventilata,

lontana dalla luce diretta del sole. Non racchiudere o coprire il

dispositivo con asciugamani o altri oggetti. Non inserire il dispositivo

in un contenitore nel quale il calore stenta a dissiparsi, come ad

esempio all'interno di una scatola o di una busta.

85

 Conservare il dispositivo lontano da fonti di calore e da fiamme, quali

termosifoni, forni a microonde, stufe, scaldabagni, camini o candele.

 L'uso di adattatori di alimentazione, caricabatterie o batterie non

approvati o incompatibili potrebbe causare un incendio,

un'esplosione o altri eventi pericolosi.

 Scegliere solo accessori approvati per l'utilizzo con questo modello

dal produttore del dispositivo. L'uso di un qualsiasi altro tipo di

accessori può rendere nulla la garanzia, violare leggi e normative

locali ed esporre a rischi persone e cose. Contattare il rivenditore per

informazioni sulla disponibilità di accessori approvati nella propria

zona.

 La spina ha la finalità di consentire lo scollegamento.

 Per i dispositivi collegabili, la presa deve essere installata accanto al

dispositivo ed essere facilmente accessibile.

86

 Con il presente documento, Huawei Technologies Co., Ltd. dichiara

che questo dispositivo è conforme ai requisiti essenziali e alle altre

disposizioni applicabili della direttiva 1999/5/CE.

87

Veiligheidsinformatie

 De ideale werktemperatuur ligt tussen de -10°C en +40°C. De ideale

opslagtemperatuur ligt tussen de -20°C en +70°C. Extreme hitte of

kou kan uw apparaat of accessoires beschadigen.

 Bewaar het apparaat en de accessoires in een voldoende

geventileerde en koele ruimte, uit de buurt van direct zonlicht.

Omwikkel of bedek uw apparaat niet met handdoeken of andere

voorwerpen. Plaats het apparaat niet in een container met een

slechte warmte-afscheiding, zoals een doos of tas.

 Houd het apparaat weg van hitte- en vuurbronnen, zoals een kachel,

magnetron, kookplaat, waterkoker, radiator of kaars.

88

 Het gebruik van een niet goedgekeurde of niet compatibele

voedingsadapter, oplader of batterij kan brand, explosies of andere

gevaren tot gevolg hebben.

 Kies alleen accessoires die door de fabrikant zijn goedgekeurd voor

gebruik met dit model. Het gebruik van andere typen accessoires kan

de garantie ongeldig maken, in strijd zijn met lokale voorschriften en

wetten, en kan gevaarlijk zijn. Neem contact op met uw

verkooppunt voor informatie over de beschikbaarheid van

goedgekeurde accessoires bij u in de buurt.

 De stroomstekker is bedoeld als ontkoppelingsmiddel.

 Voor aansluiting van apparaten op het stroomnet moet de

wandcontactdoos dicht bij de apparaten worden geïnstalleerd en

goed toegankelijk zijn.

89

 Hierbij verklaart Huawei Technologies Co., Ltd. dat dit apparaat

voldoet aan de essentiële vereisten en andere relevante bepalingen

van de 1999/5/EG-richtlijn.

90

Informações de segurança

 As temperaturas ideais de funcionamento situam-se entre os -10 °C

e os +40 °C. As temperaturas ideais de armazenamento situam-se

também entre os -20 °C e os +70 °C. O calor ou o frio em excesso

pode danificar o dispositivo ou os acessórios.

 Mantenha o dispositivo e os acessórios numa área fresca e bem

ventilada protegida da luz solar directa. Não envolva nem cubra o

dispositivo com toalhas ou outros objectos. Não coloque o

dispositivo num recipiente com pouca dissipação do calor, como

uma caixa ou saco.

91

 Mantenha o dispositivo protegido de fontes de calor e de incêndio,

como aquecedores, fornos de micro-ondas, fogões, esquentadores,

radiadores ou velas.

 A utilização de um transformador de corrente, carregador ou bateria

não aprovado ou incompatível pode provocar um incêndio, uma

explosão ou outros perigos.

 Seleccione apenas acessórios aprovados pelo fabricante do

dispositivo para utilização com este modelo. A utilização de qualquer

outro tipo de acessórios pode anular a garantia, violar as leis e os

regulamentos locais e ser perigoso. Contacte o seu revendedor para

obter informações sobre a disponibilidade de acessórios aprovados

na sua área.

 A ficha de alimentação destina-se a funcionar como uma interrupção

da ligação.

92

 No caso de dispositivos de ligação à corrente, a tomada eléctrica

deverá estar situada perto dos dispositivos e facilmente acessível.

 A Huawei Technologies Co., Ltd. declara pelo presente que este

dispositivo está em conformidade com os requisitos essenciais e

outras disposições relevantes da Directiva 1999/5/CE.

93

Información de seguridad

 Las temperaturas de operación ideales oscilan entre -10 °C y +40 °C.

Las temperaturas de almacenamiento ideales oscilan entre -20 °C y

+70 °C. El frío o el calor extremos pueden dañar el dispositivo o los

accesorios.

 Mantenga el dispositivo y sus accesorios en un área fresca y bien

ventilada lejos de la luz directa del sol. No envuelva ni cubra el

dispositivo con toallas ni otros objetos. No coloque el dispositivo en

un contenedor con poca disipación del calor, como una caja o un

bolso.

94

 Mantenga el dispositivo alejado del fuego o de fuentes de calor (por

ejemplo, estufas, hornos de microondas, cocinas, calentadores,

radiadores o velas).

 El uso de baterías, cargadores o adaptadores de corriente no

autorizados o incompatibles puede generar incendios, explosiones u

otras situaciones peligrosas.

 Utilice solo los accesorios aprobados por el fabricante para este

modelo. El uso de cualquier otro tipo de accesorio puede invalidar la

garantía,violar leyes y normas locales, y resultar peligroso.

Comuníquese con el vendedor para obtener información sobre la

disponibilidad de accesorios aprobados en el área donde reside.

 El enchufe debe funcionar como un dispositivo de desconexión.

95

 En el caso de los dispositivos que van conectados a la red, la toma de

corriente debe encontrarse cerca del dispositivo y debe ser de fácil

acceso.

 Por este medio, Huawei Technologies Co., Ltd. declara que este

dispositivo cumple con los requerimientos esenciales y otras

disposiciones pertinentes de la Directiva 1999/5/EC.

31010***_01

Huawei E8278 Snelstartgids

Huawei E8278 Snelstartgids

in andere talen

Gerelateerde papieren

Andere documenten