Zebra LS4278 Referentie gids

Merk: Zebra

Model: LS4278

Categorie: Streepjescodelezers

Type: Referentie gids

LS4278

Quick Reference Guide

2 LS4278

Zebra reserves the right to make changes to any product to improve reliability, function, or

design.

Zebra does not assume any product liability arising out of, or in connection with, the

application or use of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under any

patent right or patent, covering or relating to any combination, system, apparatus, machine,

material, method, or process in which Zebra products might be used. An implied license exists

only for equipment, circuits, and subsystems contained in Zebra products.

Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is

a registered trademark of Symbol Technologies, Inc., a Zebra Technologies company.

Zebra Technologies Corporation

Lincolnshire, IL U.S.A.

http://www.zebra.com

Warranty

For the complete Zebra hardware product warranty statement, go to:

http://www.zebra.com/warranty

Quick Reference Guide 3

Introduction

The LS4278 scanner combines excellent scanning performance and advanced

ergonomics to provide the best value in a lightweight laser scanner. Whether used

as a hand-held scanner or in hands-free mode in a stand, the scanner ensures

comfort and ease of use for extended periods of time. Before programming the

scanner, scan the appropriate bar code(s), beginning on page 8, to communicate

with the host.

Parts

Battery Insertion/Removal

Beeper

LED

Scan

Trigger

Scan

Window

Connect

456

4 LS4278

Scanner Insertion in Cradle

Table Top

Wall Mount

Aiming

hook

facing up

Quick Reference Guide 5

Scanning

Beeper Definitions

The scanner issues different beep sequences and patterns to indicate status. The

table below defines beep sequences that occur during both normal scanning and

while programming the scanner.

Beeper Sequence Indication

Standard Use

Low/medium/high beeps Power up.

High beep A bar code symbol was decoded (if decode beeper is

enabled).

Four long low beeps A transmission error was detected in a scanned symbol.

The data is ignored. This occurs if a unit is not properly

configured. Check option setting.

Five low long beeps Conversion or format error.

Low/high/low beeps ADF transmit error.

High/high/high/low beeps RS-232 receive error.

Parameter Menu Scanning

Long low/long high beeps Input error, incorrect bar code or “Cancel” scanned, wrong

entry, incorrect bar code programming sequence; remain

in program mode.

High/low beeps Keyboard parameter selected. Enter value using bar code

keypad.

High/low/high/low beeps Successful program exit with change in the parameter

setting.

Long low/long high/long low/long

high beeps

Out of host parameter storage space. Scan Set Defaults

on page 8.

Wireless Operation

High/low/high/low beeps Pairing bar code scanned.

Low/high beeps Bluetooth connection established.

012345

6 LS4278

LED Definitions

In addition to beeper sequences, the scanner communicates with the user using a

two-color LED display. The table below defines LED colors that display during

scanning and charging.

High/low beeps Bluetooth disconnection event.

Long low/long high beeps Page timeout; remote device is out of range/not powered.

Long low/long high/long low/long

high beeps

Connection attempt was rejected by remote device.

Code 39 Buffering

High/low beeps New Code 39 data was entered into the buffer.

Three long high beep Code 39 buffer is full.

Low/high/low beeps The Code 39 buffer was erased or there was an attempt to

clear or transmit an empty buffer.

Low/high beeps A successful transmission of buffered data.

Host Specific

USB only

Four high beeps Scanner has not completed initialization. Wait several

seconds and scan again.

Scanner gives a power-up beep

after scanning a USB Device Type.

Communication with the bus must be established before

the scanner can operate at the highest power level.

This power-up beep occurs more

than once.

The USB bus may put the scanner in a state where power

to the scanner is cycled on and off more than once. This is

normal and usually happens when the host PC cold boots.

RS-232 only

High beep A <BEL> character is received and Beep on <BEL> is

enabled.

Scanning LED Indication

Green Flash A bar code was successfully decoded.

Charging LED Indication

Green - Slow Continuous Flash Non-critical battery temperature fault.

Green - Fast Continuous Flash Scanner is charging.

Green - Solid Scanner is fully charged.

Amber - Continuous Flash Critical battery temperature fault.

Beeper Sequence Indication

Quick Reference Guide 7

Troubleshooting

Problem Possible Cause Possible Solutions

LED indicates a

battery temperature

fault.

Battery is above or

below normal

operating

temperature.

Do not use the scanner. Move the scanner to a

location within normal operating temperature.

The scanner can remain in the cradle while the

battery warms or cools to normal operating

temperature. Refer to the Product Reference

Guide for more information.

Nothing happens

when the trigger is

pulled.

No power to the

scanner.

Battery may be discharged; charge scanner in

cradle.

Check that battery door is closed

Ensure that end cap to battery chamber is

secured.

Scanner is disabled. Some host interfaces (e.g., Synapse, IBM-468x)

can disable the scanner. If this applies, enable

the scanner via the host interface.

Laser comes on,

but symbol does not

decode.

Scanner is not

programmed for the

correct bar code

type.

Ensure the scanner is programmed to read the

type of bar code scanned.

Refer to the Product Reference Guide for more

information.

Bar code symbol is

unreadable.

Check the symbol to ensure it is not defaced. Try

scanning test symbols of the same bar code type.

Distance between

scanner and bar

code is incorrect.

Move the scanner closer to or further from the bar

code.

Symbol is decoded

but not transmitted

to the host.

Cradle is not

programmed for the

correct host

interface.

Check scanner host parameters or edit options.

Scanner not paired

to host-connected

interface.

Pair the scanner to the cradle (using PAIR bar

code on the cradle).

Interface cable is

loose.

Ensure all cable connections are secure.

Cradle has lost

connection to host.

In this exact order: disconnect power supply;

disconnect host cable; wait three seconds;

reconnect host cable; reconnect power supply;

reestablish pairing.

Scanned data is

incorrectly

displayed on the

host.

Scanner is not

programmed to work

with the host.

Ensure proper host is selected.

Check the scanner’s host type parameters or

editing options.

For RS-232, ensure the scanner’s

communication parameters match the host’s

settings.

For a keyboard wedge configuration, ensure the

system is programmed for the correct keyboard

type, and the CAPS LOCK key is off.

Ensure editing options (e.g., UPC-E to UPC-A

conversion) are properly programmed.

Refer to the Product Reference Guide for more

information.

8 LS4278

Programming Bar Codes

Following are some frequently used programming bar codes.

Set Defaults

Scan SET DEFAULTS to set all parameters to their default values.

SET DEFAULTS

Scanning Modes

Scan the appropriate bar code below to determine the scanning pattern.

• SINGLE LINE ONLY - No up and down scan line movement (no raster).

• MULTI-LINE SMART RASTER - The scan line begins as a single line and

moves up and down (rasters) when a partial scan of a bar code is detected, or

no bar code is decoded 500 ms after the trigger is pulled.

• MULTI-LINE ALWAYS RASTER (default) - Rastering (up and down scan line

movement) begins immediately.

SINGLE LINE ONLY

MULTI-LINE SMART RASTER

MULTI-LINE ALWAYS RASTER (Default)

NOTE For additional host types, refer to the LS4278 Product Reference

Guide, p/n 72E-69834-xx, available on the website:

http://www.zebra.com/support.

Quick Reference Guide 9

Host Types

If a Synapse cable is used (i.e., part number STIxx-xxxx), the scanner autodetects

the Synapse cable and there is no need to scan bar codes to enable the Synapse

host.

If a USB interface is used, the scanner autodetects the USB and defaults to the

HID keyboard interface. See page 12 to select the IBM hand-held host type.

If a Keyboard Wedge, RS-232, Wand Emulation, Scanner Emulation, or IBM

46XX is used, the appropriate host type must be scanned. Select the appropriate

host type from the bar codes that follow.

Keyboard Wedge Host Type

Country Keyboard Types (Country Codes)

IBM PC/AT and IBM PC COMPATIBLES

NORTH AMERICAN (Default)

FRENCH Windows

FRENCH CANADIAN Windows 95/98

FRENCH CANADIAN Windows XP/2000

10 LS4278

Country Keyboard Types (Country Codes)

GERMAN Windows

SPANISH Windows

ITALIAN Windows

SWEDISH Windows

UK ENGLISH Windows

JAPANESE Windows

PORTUGUESE-BRAZILIAN Windows

Quick Reference Guide 11

RS-232 Host Types

USB Host Types

STANDARD RS-232

ICL RS-232

NIXDORF RS-232 MODE A

NIXDORF RS-232 MODE B

FUJITSU RS-232

OPOS/JPOS

HID KEYBOARD EMULATION

IBM HAND-HELD USB

12 LS4278

IBM 46XX Host Types

Wand Emulation Host Type

Many Wand hosts require input as Code 39 data. Scan the following bar codes to

enable or disable transmission of data to the Wand host as Code 39 data.

Scanner Emulation Host Type

Scan the bar code below to enable the Scanner Emulation host.

PORT 5B

PORT 9B

SYMBOL WAND

ENABLE CONVERT TO CODE 39 FOR WAND HOST

DISABLE CONVERT TO CODE 39 FOR WAND HOST (Default)

ENABLE SCANNER EMULATION HOST

Quick Reference Guide 13

Radio Communications Host Types

Scan a bar code below to choose how the scanner connects to a remote device.

Scan Cradle Host if connecting to the STB4278 cradle.

Pairing

When the scanner is configured as an SPP or HID Master, a 'pairing bar code'

must be created for the remote Bluetooth device to which the scanner can

connect. The Bluetooth address of the remote device must be known. Pairing bar

codes are Code 128 bar codes. The format is: <Fnc 3>Bxxxxxxxxxxxx (where

xxxxxxxxxxxx represents the 12-character Bluetooth address).

Pairing Modes

When operating with the cradle, two modes of pairing are supported:

• Locked Pairing Mode - When a cradle is paired (connected) to the scanner,

any attempt to connect to a different scanner, by scanning the pairing bar code

on the cradle or by inserting it into the cradle with Pairing on Contacts

enabled, is rejected. The currently connected scanner maintains its

connection.

• Unlocked Pairing Mode - A new scanner can be paired (connected) to a

cradle at any time by scanning the pairing bar code on the cradle or by

inserting it into the cradle with Pairing On Contacts enabled. The original

scanner is disconnected from the cradle in favor of the new one (Point-to-Point

mode only).

CRADLE HOST

SERIAL PORT PROFILE (MASTER)

SERIAL PORT PROFILE (SLAVE)

BLUETOOTH KEYBOARD EMULATION

(HID SLAVE)

14 LS4278

Pairing Methods

There are two pairing methods. The default method pairs (connects) the scanner

and cradle when the pairing bar code on the cradle is scanned. A second method

pairs the scanner and cradle when the scanner is inserted in the cradle. To enable

this feature, scan Enable Pair On Contacts below. With this feature enabled it is

not necessary to scan the pairing bar code on the cradle. If the pairing is

successful, a low/high connection beep sequence sounds a few seconds after the

scanner is placed in the cradle.

Carriage Return/Line Feed

To append a carriage return/line feed to all transmitted data, scan the following

bar codes in the order shown. To cancel this operation, the SET DEFAULTS bar

code on page 8, or refer to the Product Reference Guide.

NOTE If three scanners are actively connected to the cradle

(Multipoint-to-Point mode), a fourth scanner cannot connect

regardless of the pairing mode.

UNLOCKED PAIRING MODE (Default)

LOCKED PAIRING MODE

ENABLE PAIR ON CONTACTS

DISABLE PAIR ON CONTACTS (Default)

SCAN OPTIONS

ENTER

Quick Reference Guide 15

Ergonomic Recommendations

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Regulatory Information

This guide applies to Model Number LS4278.

All Zebra devices are designed to be compliant with rules and regulations in locations they are

sold and will be labeled as required.

Any changes or modifications to Zebra Technologies equipment, not expressly approved by

Zebra Technologies, could void the user's authority to operate the equipment.

Local language translations are available at the following website:

http://www.zebra.com/support

Country Approval

Regulatory markings are applied to the device signifying the radio (s) are approved for use in

the following countries: United States, Canada, Australia, Japan & Europe.

Please refer to the Declaration of Conformity (DoC) for details of other country markings. This

is available at http://www.zebra.com/doc.

Note: For 2.4GHz Products: Europe includes, Austria, Belgium, Bulgaria, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United

Kingdom.

Radio Modules

The LS4278 Scanners contain an approved radio module. This module is the Bluetooth radio

Type: LMX5452.

CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow

the recommendations below. Consult with your local Health & Safety

Manager to ensure that you are adhering to your company’s safety

programs to prevent employee injury.

16 LS4278

Bluetooth Devices

This product is an approved Bluetooth device. BT ID: B02793.

Operation of the device without regulatory approval is illegal.

FCC / EU RF Exposure Guidelines

Safety Information

The device complies with Internationally recognised standards covering Specific Absorption

Rate (SAR) related to human exposure to electromagnetic fields from radio devices.

Reducing RF Exposure – Use Properly

It is advisable to use the device only in the normal operating position.

Hand Held Devices:

To comply with FCC RF exposure requirements, this device must be operated in the hand.

Other operating configurations should be avoided.

Radio Frequency Interference Requirements

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Radio Frequency Interference Requirements - Canada

Radio Transmitters

This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada

technical specifications were met.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil de la classe B est conforme à la norme NMB-003 du Canada.

Tested to comply

with FCC Standards

FOR HOME OR OFFICE USE

Quick Reference Guide 17

Marking and European Economic Area (EEA)

Bluetooth for use through the EEA have the following restrictions:

• Maximum radiated transmit power of 10mW EIRP in the frequency range 2.400 -2.4835

GHz

• Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range

Statement of Compliance

Zebra hereby, declares that this device is in compliance with the essential requirements and

other relevant provisions of Directive 1999/5/EC and 2011/65/EU. A Declaration of Conformity

may be obtained from http://www.zebra.com/doc

Laser Labels

In accordance with IEC60825-1 and EN60825, the following information is provided to the

user:

ENGLISH HEBREW

CLASS 1 CLASS 1 LASER PRODUCT

CLASS 2 LASER LIGHT

DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

DANISH / DANSK ITALIAN / ITALIANO

KLASSE 1 KLASSE 1 LASERPRODUKT CLASSE 1 PRODOTTO AL LASER DI CLASSE 1

KLASSE 2 LASERLYF CLASSE 2 LUCE LASER

SE IKKE IND I STRÅLEN NON FISSARE IL RAGGIO

KLASSE 2 LASERPRODUKT PRODOTTO AL LASER DI CLASSE 2

DUTCH / NEDERLANDS NORWEGIAN / NORSK

KLASSE 1 KLASSE-1 LASERPRODUKT KLASSE 1 LASERPRODUKT, KLASSE 1

KLASSE 2 LASERLICHT KLASSE 2 LASERLYS

NIET IN STRAAL STAREN IKKE STIRR INN I LYSSTRÅLEN

KLASSE-2 LASERPRODUKT LASERPRODUKT, KLASSE 2

FINNISH / SUOMI PORTUGUESE / PORTUGUÊS

LUOKKA 1 LUOKKA 1 LASERTUOTE CLASSE 1 PRODUTO LASER DA CLASSE 1

LUOKKA 2 LASERVALO CLASSE 2 LUZ DE LASER

ÄLÄ TUIJOTA SÄDETTÄ NÃO FIXAR O RAIO LUMINOSO

LUOKKA 2 LASERTUOTE PRODUTO LASER DA CLASSE 2

FRENCH / FRANÇAIS SPANISH / ESPAÑOL

CLASSE 1 PRODUIT LASER DE CLASSE 1 CLASE 1 PRODUCTO LÁSER DE LA CLASE 1

CLASSE 2 LUMIERE LASER CLASE 2 LUZ LÁSER

NE PAS REGARDER LE RAYON FIXEMENT NO MIRE FIJAMENTE EL HAZ

PRODUIT LASER DE CLASSE 2 PRODUCTO LÁSER DE LA CLASE 2

GERMAN / DEUTSCH SWEDISH / SVENSKA

KLASSE 1 LASERPRODUKT DER KLASSE 1 KLASS 1 LASERPRODUKT KLASS 1

KLASSE 2 LASERSTRAHLEN KLASS 2 LASERLJUS

NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN STIRRA INTE MOT STRÅLEN

LASERPRODUKT DER KLASSE 2 LASERPRODUKT KLASS 2

18 LS4278

Laser Devices

COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS

PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC

60825-1 (Ed. 2.0), EN60825-1:2007.

The laser classification is marked on one of the labels on the device.

Class 1 Laser devices are not considered to be hazardous when used for their intended

purpose. The following statement is required to comply with US and international regulations:

Caution: Use of controls, adjustments or performance of procedures other than those

specified herein may result in hazardous laser light exposure.

Class 2 laser scanners use a low power, visible light diode. As with any very bright light

source, such as the sun, the user should avoid staring directly into the light beam. Momentary

exposure to a Class 2 laser is not known to be harmful.

Scanner Labeling

Waste Electrical and Electronic Equipment (WEEE)

English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling. For

information on how to return product, please go to: http://www.zebra.com/weee.

Български: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се връщат

на Zebra за рециклиране. За информация относно връщането на продукти, моля отидете на адрес:

http://www.zebra.com/weee.

Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skončení jejich životnosti vrátit společnosti

Zebra k recyklaci. Informace o způsobu vrácení produktu najdete na webové stránce:

http://www.zebra.com/weee.

Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs

oplysningerne om returnering af produkter på: http://www.zebra.com/weee.

Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling

an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter

http://www.zebra.com/weee.

Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Zebra'ile.

Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi:

http://www.zebra.com/weee.

Quick Reference Guide 19

Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final de su

ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto, visite:

http://www.zebra.com/weee.

Ελληνικά : Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να επιστρ

έφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή ενός π

ροϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο.

Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés à

Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez :

http://www.zebra.com/weee.

Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono essere

restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare il

seguente sito Web: http://www.zebra.com/weee.

Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į

kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.

Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra otrreizējai

pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet:

http://www.zebra.com/weee.

Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni

újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a

http://www.zebra.com/weee weboldalra.

Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati

għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur:

http://www.zebra.com/weee.

Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra te

worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie over het

terugzenden van producten.

Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji naleźy zwrócić do firmy Zebra

w celu ich utylizacji. Informacje na temat zwrotu produktów znajdują się na stronie internetowej

http://www.zebra.com/weee.

Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para

reciclagem. Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee.

Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie returnate la

Zebra pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi: http://www.zebra.com/weee.

Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za reciklažo.

Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.

Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Zebra-yhtiöön,

kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee.

Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för

återvinning. Information om hur du returnerar produkten finns på http://www.zebra.com/weee.

Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade edilmelidir.

Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin: http://www.zebra.com/weee.

TURKISH WEEE Statement of Compliance

EEE Yönetmeliğine Uygundur

If you have a problem using the equipment, contact your facility’s technical or

systems support. If there is a problem with the equipment, they will contact the

Zebra Global Customer Support Center at: http://www.zebra.com/support.

For the latest version of this guide go to: http://www.zebra.com/support.

Zebra Technologies Corporation

Lincolnshire, IL U.S.A.

http://www.zebra.com

Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo

is a registered trademark of Symbol Technologies, Inc., a Zebra Technologies company.

72-69835-02 Revision A - March 2015

Service Information

Zebra LS4278 Referentie gids

Merk: Zebra

Model: LS4278

Categorie: Streepjescodelezers

Type: Referentie gids

Download PDF

rapport

in andere talen

English: Zebra LS4278 Reference guide

Zebra LS4278 Referentie gids

Zebra LS4278 Referentie gids

in andere talen

Gerelateerde artikelen

Andere documenten