Motorola Symbol LS4278 Quick Reference Manual
- Categorie
- Streepjescodelezers
- Type
- Quick Reference Manual
QUESTIONS?
Ask the experts at POSMicro.com.
1.800.241.6264
Live Chat Now
Monday - Friday 6 AM to 5 PM Pacic Time
BULK DISCOUNTS
FREE SHIPPING*
SE HABLA
ESPAñOL
*Free ground shipping to the continental USA on orders over $100.
For Help Call
1.800.241.6264
Symbol LS4278 Quick
Start
More information available at POSMicro.com
Symbol LS4278
Quick Reference Guide
2 Symbol LS4278
© 2008 - 2010 MOTOROLA, INC. All rights reserved.
Motorola reserves the right to make changes to any product to improve reliability,
function, or design.
Motorola does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which Motorola products might be used. An
implied license exists only for equipment, circuits, and subsystems contained in
Motorola products.
MOTOROLA, the Stylized M Logo and Symbol and the Symbol logo are registered
trademarks of Motorola, Inc. Other product names mentioned in this manual may be
trademarks or registered trademarks of their respective companies and are hereby
acknowledged.
Motorola, Inc.
One Motorola Plaza
Holtsville, N.Y. 11742-1300
http://www.motorola.com/enterprisemobility
Warranty
For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty
Quick Reference Guide 3
Introduction
The Symbol LS4278 scanner combines excellent scanning performance and
advanced ergonomics to provide the best value in a lightweight laser scanner.
Whether used as a hand-held scanner or in hands-free mode in a stand, the
scanner ensures comfort and ease of use for extended periods of time. Before
programming the scanner, scan the appropriate bar code(s), beginning on page 8,
to communicate with the host.
Parts
Battery Insertion/Removal
Beeper
LED
Scan
Trigger
Scan
Window
12
3
Connect
456
4 Symbol LS4278
Scanner Insertion in Cradle
Table Top
Wall Mount
Aiming
hook
facing up
65
o
65
o
Quick Reference Guide 5
Scanning
Beeper Definitions
The scanner issues different beep sequences and patterns to indicate status. The
table below defines beep sequences that occur during both normal scanning and
while programming the scanner.
Beeper Sequence Indication
Standard Use
Low/medium/high beeps Power up.
High beep A bar code symbol was decoded (if decode beeper is
enabled).
Four long low beeps A transmission error was detected in a scanned symbol.
The data is ignored. This occurs if a unit is not properly
configured. Check option setting.
Five low long beeps Conversion or format error.
Low/high/low beeps ADF transmit error.
High/high/high/low beeps RS-232 receive error.
Parameter Menu Scanning
Long low/long high beeps Input error, incorrect bar code or “Cancel” scanned, wrong
entry, incorrect bar code programming sequence; remain
in program mode.
High/low beeps Keyboard parameter selected. Enter value using bar code
keypad.
High/low/high/low beeps Successful program exit with change in the parameter
setting.
Long low/long high/long low/long
high beeps
Out of host parameter storage space. Scan Set Defaults
on page 8.
Wireless Operation
High/low/high/low beeps Pairing bar code scanned.
Low/high beeps Bluetooth connection established.
012345
012345
012345
012345
6 Symbol LS4278
LED Definitions
In addition to beeper sequences, the scanner communicates with the user using a
two-color LED display. The table below defines LED colors that display during
scanning and charging.
High/low beeps Bluetooth disconnection event.
Long low/long high beeps Page timeout; remote device is out of range/not powered.
Long low/long high/long low/long
high beeps
Connection attempt was rejected by remote device.
Code 39 Buffering
High/low beeps New Code 39 data was entered into the buffer.
Three long high beep Code 39 buffer is full.
Low/high/low beeps The Code 39 buffer was erased or there was an attempt to
clear or transmit an empty buffer.
Low/high beeps A successful transmission of buffered data.
Host Specific
USB only
Four high beeps Scanner has not completed initialization. Wait several
seconds and scan again.
Scanner gives a power-up beep
after scanning a USB Device Type.
Communication with the bus must be established before
the scanner can operate at the highest power level.
This power-up beep occurs more
than once.
The USB bus may put the scanner in a state where power
to the scanner is cycled on and off more than once. This is
normal and usually happens when the host PC cold boots.
RS-232 only
High beep A <BEL> character is received and Beep on <BEL> is
enabled.
Scanning LED Indication
Green Flash A bar code was successfully decoded.
Charging LED Indication
Green - Slow Continuous Flash Non-critical battery temperature fault.
Green - Fast Continuous Flash Scanner is charging.
Green - Solid Scanner is fully charged.
Amber - Continuous Flash Critical battery temperature fault.
Beeper Sequence Indication
Quick Reference Guide 7
Troubleshooting
Problem Possible Cause Possible Solutions
LED indicates a
battery temperature
fault.
Battery is above or
below normal
operating
temperature.
Do not use the scanner. Move the scanner to a
location within normal operating temperature.
The scanner can remain in the cradle while the
battery warms or cools to normal operating
temperature. Refer to the Product Reference
Guide for more information.
Nothing happens
when the trigger is
pulled.
No power to the
scanner.
Battery may be discharged; charge scanner in
cradle.
Check that battery door is closed
Ensure that end cap to battery chamber is
secured.
Scanner is disabled. Some host interfaces (e.g., Synapse, IBM-468x)
can disable the scanner. If this applies, enable
the scanner via the host interface.
Laser comes on,
but symbol does not
decode.
Scanner is not
programmed for the
correct bar code
type.
Ensure the scanner is programmed to read the
type of bar code scanned.
Refer to the Product Reference Guide for more
information.
Bar code symbol is
unreadable.
Check the symbol to ensure it is not defaced. Try
scanning test symbols of the same bar code type.
Distance between
scanner and bar
code is incorrect.
Move the scanner closer to or further from the bar
code.
Symbol is decoded
but not transmitted
to the host.
Cradle is not
programmed for the
correct host
interface.
Check scanner host parameters or edit options.
Scanner not paired
to host-connected
interface.
Pair the scanner to the cradle (using PAIR bar
code on the cradle).
Interface cable is
loose.
Ensure all cable connections are secure.
Cradle has lost
connection to host.
In this exact order: disconnect power supply;
disconnect host cable; wait three seconds;
reconnect host cable; reconnect power supply;
reestablish pairing.
Scanned data is
incorrectly
displayed on the
host.
Scanner is not
programmed to work
with the host.
Ensure proper host is selected.
Check the scanner’s host type parameters or
editing options.
For RS-232, ensure the scanner’s
communication parameters match the host’s
settings.
For a keyboard wedge configuration, ensure the
system is programmed for the correct keyboard
type, and the CAPS LOCK key is off.
Ensure editing options (e.g., UPC-E to UPC-A
conversion) are properly programmed.
Refer to the Product Reference Guide for more
information.
8 Symbol LS4278
Programming Bar Codes
Following are some frequently used programming bar codes.
Set Defaults
Scan SET DEFAULTS to set all parameters to their default values.
SET DEFAULTS
Scanning Modes
Scan the appropriate bar code below to determine the scanning pattern.
• SINGLE LINE ONLY - No up and down scan line movement (no raster).
• MULTI-LINE SMART RASTER - The scan line begins as a single line and
moves up and down (rasters) when a partial scan of a bar code is detected, or
no bar code is decoded 500 ms after the trigger is pulled.
• MULTI-LINE ALWAYS RASTER (default) - Rastering (up and down scan line
movement) begins immediately.
SINGLE LINE ONLY
MULTI-LINE SMART RASTER
MULTI-LINE ALWAYS RASTER (Default)
NOTE For additional host types, refer to the Symbol LS4278 Product
Reference Guide, p/n 72E-69834-xx, available on the website:
http://www.motorola.com/enterprisemobility/manuals
.
Quick Reference Guide 9
Host Types
If a Synapse cable is used (i.e., part number STIxx-xxxx), the scanner autodetects
the Synapse cable and there is no need to scan bar codes to enable the Synapse
host.
If a USB interface is used, the scanner autodetects the USB and defaults to the
HID keyboard interface. See page 12 to select the IBM hand-held host type.
If a Keyboard Wedge, RS-232, Wand Emulation, Scanner Emulation, or IBM
46XX is used, the appropriate host type must be scanned. Select the appropriate
host type from the bar codes that follow.
Keyboard Wedge Host Type
Country Keyboard Types (Country Codes)
IBM PC/AT and IBM PC COMPATIBLES
NORTH AMERICAN (Default)
FRENCH Windows
FRENCH CANADIAN Windows 95/98
FRENCH CANADIAN Windows XP/2000
10 Symbol LS4278
Country Keyboard Types (Country Codes)
GERMAN Windows
SPANISH Windows
ITALIAN Windows
SWEDISH Windows
UK ENGLISH Windows
JAPANESE Windows
PORTUGUESE-BRAZILIAN Windows
Quick Reference Guide 11
RS-232 Host Types
USB Host Types
STANDARD RS-232
ICL RS-232
NIXDORF RS-232 MODE A
NIXDORF RS-232 MODE B
FUJITSU RS-232
OPOS/JPOS
HID KEYBOARD EMULATION
IBM HAND-HELD USB
12 Symbol LS4278
IBM 46XX Host Types
Wand Emulation Host Type
Many Wand hosts require input as Code 39 data. Scan the following bar codes to
enable or disable transmission of data to the Wand host as Code 39 data.
Scanner Emulation Host Type
Scan the bar code below to enable the Scanner Emulation host.
PORT 5B
PORT 9B
SYMBOL WAND
ENABLE CONVERT TO CODE 39 FOR WAND HOST
DISABLE CONVERT TO CODE 39 FOR WAND HOST (Default)
ENABLE SCANNER EMULATION HOST
Quick Reference Guide 13
Radio Communications Host Types
Scan a bar code below to choose how the scanner connects to a remote device.
Scan Cradle Host if connecting to the Symbol STB4278 cradle.
Pairing
When the scanner is configured as an SPP or HID Master, a 'pairing bar code'
must be created for the remote Bluetooth device to which the scanner can
connect. The Bluetooth address of the remote device must be known. Pairing bar
codes are Code 128 bar codes. The format is: <Fnc 3>Bxxxxxxxxxxxx (where
xxxxxxxxxxxx represents the 12-character Bluetooth address).
Pairing Modes
When operating with the cradle, two modes of pairing are supported:
• Locked Pairing Mode - When a cradle is paired (connected) to the scanner,
any attempt to connect to a different scanner, by scanning the pairing bar code
on the cradle or by inserting it into the cradle with Pairing on Contacts
enabled, is rejected. The currently connected scanner maintains its
connection.
• Unlocked Pairing Mode - A new scanner can be paired (connected) to a
cradle at any time by scanning the pairing bar code on the cradle or by
inserting it into the cradle with Pairing On Contacts enabled. The original
scanner is disconnected from the cradle in favor of the new one (Point-to-Point
mode only).
CRADLE HOST
SERIAL PORT PROFILE (MASTER)
SERIAL PORT PROFILE (SLAVE)
BLUETOOTH KEYBOARD EMULATION
(HID SLAVE)
14 Symbol LS4278
Pairing Methods
There are two pairing methods. The default method pairs (connects) the scanner
and cradle when the pairing bar code on the cradle is scanned. A second method
pairs the scanner and cradle when the scanner is inserted in the cradle. To enable
this feature, scan Enable Pair On Contacts below. With this feature enabled it is
not necessary to scan the pairing bar code on the cradle. If the pairing is
successful, a low/high connection beep sequence sounds a few seconds after the
scanner is placed in the cradle.
Carriage Return/Line Feed
To append a carriage return/line feed to all transmitted data, scan the following
bar codes in the order shown. To cancel this operation, the SET DEFAULTS bar
code on page 8, or refer to the Product Reference Guide.
NOTE If three scanners are actively connected to the cradle
(Multipoint-to-Point mode), a fourth scanner cannot connect
regardless of the pairing mode.
UNLOCKED PAIRING MODE (Default)
LOCKED PAIRING MODE
ENABLE PAIR ON CONTACTS
DISABLE PAIR ON CONTACTS (Default)
SCAN OPTIONS
<DATA><SUFFIX>
ENTER
Quick Reference Guide 15
Ergonomic Recommendations
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Regulatory Information
Symbol Technologies, Inc., the Enterprise Mobility business of Motorola, Inc. ("Motorola").
All Symbol devices are designed to be compliant with rules and regulations in locations they
are sold and will be labeled as required. Any changes or modifications to Symbol
Technologies equipment, not expressly approved by Symbol Technologies, could void the
user's authority to operate the equipment.
Local language translations are available at the following web site:
http://www.motorola.com/enterprisemobility/support
Country Approval
Regulatory markings are applied to the device signifying the radio (s) are approved for use in
the following countries: United States, Canada, Australia, Japan & Europe1.
Please refer to the Symbol Declaration of Conformity (DoC) for details of other country
markings. This is available at http://www.motorola.com/doc.
Note: For 2.4GHz Products: Europe includes, Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United
Kingdom.
Radio Modules
The Symbol LS4278 Scanners contain an approved radio module. This module is the Symbol
Bluetooth radio Type: LMX5452.
CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow
the recommendations below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your company’s safety
programs to prevent employee injury.
16 Symbol LS4278
Bluetooth Devices
This product is an approved Bluetooth device. BT ID: B02793.
Operation of the device without regulatory approval is illegal.
FCC / EU RF Exposure Guidelines
Safety Information
The device complies with Internationally recognised standards covering Specific Absorption
Rate (SAR) related to human exposure to electromagnetic fields from radio devices.
Reducing RF Exposure – Use Properly
It is advisable to use the device only in the normal operating position.
Hand Held Devices:
To comply with FCC RF exposure requirements, this device must be operated in the hand.
Other operating configurations should be avoided.
Radio Frequency Interference Requirements
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radio Frequency Interference Requirements - Canada
Radio Transmitters
This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada
technical specifications were met.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil de la classe B est conforme à la norme NMB-003 du Canada.
Tested to comply
with FCC Standards
FOR HOME OR OFFICE USE
Quick Reference Guide 17
Marking and European Economic Area (EEA)
Bluetooth for use through the EEA have the following restrictions:
• Maximum radiated transmit power of 10mW EIRP in the frequency range 2.400 -2.4835
GHz
• Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range
• Italy requires a user license for outside usage.
Statement of Compliance
Motorola/Symbol hereby, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of
Conformity may be obtained from http://www.motorola.com/doc
Laser Labels
In accordance with IEC60825-1 and EN60825, the following information is provided to the
user:
ENGLISH HEBREW
CLASS 1 CLASS 1 LASER PRODUCT
CLASS 2 LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
DANISH / DANSK ITALIAN / ITALIANO
KLASSE 1 KLASSE 1 LASERPRODUKT CLASSE 1 PRODOTTO AL LASER DI CLASSE 1
KLASSE 2 LASERLYF CLASSE 2 LUCE LASER
SE IKKE IND I STRÅLEN NON FISSARE IL RAGGIO
KLASSE 2 LASERPRODUKT PRODOTTO AL LASER DI CLASSE 2
DUTCH / NEDERLANDS NORWEGIAN / NORSK
KLASSE 1 KLASSE-1 LASERPRODUKT KLASSE 1 LASERPRODUKT, KLASSE 1
KLASSE 2 LASERLICHT KLASSE 2 LASERLYS
NIET IN STRAAL STAREN IKKE STIRR INN I LYSSTRÅLEN
KLASSE-2 LASERPRODUKT LASERPRODUKT, KLASSE 2
FINNISH / SUOMI PORTUGUESE / PORTUGUÊS
LUOKKA 1 LUOKKA 1 LASERTUOTE CLASSE 1 PRODUTO LASER DA CLASSE 1
LUOKKA 2 LASERVALO CLASSE 2 LUZ DE LASER
ÄLÄ TUIJOTA SÄDETTÄ NÃO FIXAR O RAIO LUMINOSO
LUOKKA 2 LASERTUOTE PRODUTO LASER DA CLASSE 2
FRENCH / FRANÇAIS SPANISH / ESPAÑOL
CLASSE 1 PRODUIT LASER DE CLASSE 1 CLASE 1 PRODUCTO LÁSER DE LA CLASE 1
CLASSE 2 LUMIERE LASER CLASE 2 LUZ LÁSER
NE PAS REGARDER LE RAYON FIXEMENT NO MIRE FIJAMENTE EL HAZ
PRODUIT LASER DE CLASSE 2 PRODUCTO LÁSER DE LA CLASE 2
GERMAN / DEUTSCH SWEDISH / SVENSKA
KLASSE 1 LASERPRODUKT DER KLASSE 1 KLASS 1 LASERPRODUKT KLASS 1
KLASSE 2 LASERSTRAHLEN KLASS 2 LASERLJUS
NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN STIRRA INTE MOT STRÅLEN
LASERPRODUKT DER KLASSE 2 LASERPRODUKT KLASS 2
18 Symbol LS4278
Laser Devices
COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC
60825-1 (Ed. 2.0), EN60825-1:2007.
The laser classification is marked on one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their intended
purpose. The following statement is required to comply with US and international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light
source, such as the sun, the user should avoid staring directly into the light beam. Momentary
exposure to a Class 2 laser is not known to be harmful.
Scanner Labeling
Waste Electrical and Electronic Equipment (WEEE)
Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се
връщат на Motorola за рециклиране. За информация относно връщането на продукти, моля
отидете на адрес: http://www.motorola.com/recycling/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit
spoleènosti Motorola k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce:
http://www.motorola.com/recycling/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Motorola til recirkulering, når de er udtjent.
Læs oplysningerne om returnering af produkter på: http://www.motorola.com/recycling/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Motorola zurückgesandt werden. Informationen zur Rücksendung von Produkten finden
Sie unter http://www.motorola.com/recycling/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να
επιστρέφονται στην Motorola για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.motorola.com/recycling/weee στο
Διαδίκτυο.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil
Motorola'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi:
http://www.motorola.com/recycling/weee.
Quick Reference Guide 19
English: For EU Customers: All products at the end of their life must be returned to Motorola for
recycling. For information on how to return product, please go to:
http://www.motorola.com/recycling/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Motorola al
final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un
producto, visite: http://www.motorola.com/recycling/weee.
Français: Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être
retournés à Motorola pour recyclage. Pour de plus amples informations sur le retour de produits,
consultez : http://www.motorola.com/recycle/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono
essere restituiti a Motorola al fine di consentirne il riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web: http://www.motorola.com/recycling/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Motorola
otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Motorola, lūdzu, skatiet:
http://www.motorola.com/recycling/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į
kompaniją „Motorola“. Daugiau informacijos, kaip grąžinti gaminį, rasite:
http://www.motorola.com/recycling/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Motorola vállalathoz kell eljuttatni
újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson
el a http://www.motorola.com/recycling/weee weboldalra.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu
rritornati għand Motorola għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.motorola.com/recycling/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar
Motorola te worden teruggezonden voor recycling. Raadpleeg
http://www.motorola.com/recycling/weee voor meer informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy
Motorola w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie
internetowej http://www.motorola.com/recycling/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Motorola
para reciclagem. Para obter informações sobre como devolver o produto, visite:
http://www.motorola.com/recycling/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie
returnate la Motorola pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi:
http://www.motorola.com/recycling/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Motorola za
reciklažo. Za informacije o vračilu izdelka obiščite: http://www.motorola.com/recycling/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Motorola na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:
http://www.motorola.com/recycling/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi
Motorola-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa
http://www.motorola.com/recycling/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Motorola
för återvinning. Information om hur du returnerar produkten finns på
http://www.motorola.com/recycling/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Motorola'ya iade
edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.motorola.com/recycling/weee.
If you have a problem using the equipment, contact your facility’s Technical or
Systems Support. If there is a problem with the equipment, they will contact
Motorola Enterprise Mobility Support at:
http://
www.motorola.com/enterprisemobility/contactsupport.
For the latest version of this guide go to:
http://
www.motorola.com/enterprisemobility/manuals.
Motorola, Inc.
One Motorola Plaza
Holtsville, New York 11742, USA
1-800-927-9626
http://www.motorola.com/enterprisemobility
MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S.
Patent and Trademark Office. All other product or service names are the property of their
respective owners. © Motorola, Inc. 2010
72E-69835-01 Revision C - June 2010
Service Information
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
Motorola Symbol LS4278 Quick Reference Manual
- Categorie
- Streepjescodelezers
- Type
- Quick Reference Manual
in andere talen
- English: Motorola Symbol LS4278