Pagina wordt geladen...
May 2015
SanDisk® Clip Jam™
User Manual
!
CHAPTER 1! 1!
Safety Tips and Cleaning Instructions
! 1!
Disposal Instructions! 1!
CHAPTER 2! 2!
SanDisk Clip Jam MP3 Player Overview
! 2!
Features! 2!
Minimum System Requirements! 2!
Package Contents! 2!
Clip Jam MP3 Player at a Glance! 3!
Main Menu Options:! 5!
Product Capacities! 6!
Battery! 6!
Charging! 6!
Firmware Updater! 7!
Earbuds! 7!
CHAPTER 3! 8!
Basic Operation
! 8!
Power/ Select Button! 8!
Power On! 8!
Power Off! 8!
Reset! 8!
Connecting Player to a Windows or Mac Computer! 8!
Disconnecting the Player from a Windows Computer! 9!
Disconnecting the Player from a Mac Computer! 9!
Chapter 4! 10!
Music
! 10!
Loading Music! 10!
Drag and Drop (Windows)! 10!
Drag and Drop (Mac)! 11!
Playing Music! 11!
Options Menu! 12!
Creating Playlists! 14!
CHAPTER 5! 18!
Radio
! 18!
Listening to FM Radio! 18!
Programming FM Presets! 18!
Chapter 6! 19!
Books
! 19!
Loading Audiobooks and Podcasts! 19!
Drag and Drop (Windows)! 19!
Drag and Drop (Mac)! 20!
Playing Audiobooks and Podcasts! 20!
Chapter 7! 22!
Card
! 22!
microSDHC™ Card! 22!
Chapter 8! 23!
Settings
! 23!
System Settings! 23!
Music Options! 29!
Audiobook and Podcast Options! 29!
Radio Options! 30!
Chapter 9! 31!
Learn More, Service, and Warranty
Information
! 31!
THIRD PARTY INTELLECTUAL PROPERTY NOTICE! 31!
SanDisk Manufacturer’s Limited Warranty! 32!
FCC REGULATION! 32!
Safety Tips, Cleaning & Instructions
!
1!
CHAPTER 1
This chapter describes the safety tips and cleaning instructions for
the SanDisk Clip Jam MP3 player.
Safety Tips and Cleaning Instructions
1.! Read the safety instructions carefully before using the player.
2.! Review this entire manual to ensure proper usage.
3.! Keep this User Manual for future reference.
4.! Do not use headphones/earphones while driving, cycling, or operating any
motorized
vehicle. This may create a traffic hazard and may be illegal in
some areas. It can also be
dangerous to play your music with
headphones/earphones at high volume while walking,
or engaged in other
activities. You should exercise extreme caution and discontinue use in
potentially hazardous situations.
5.! Avoid using headphones/earphones at high volume. Hearing experts advise
against
continuous loud and extended music play. Keep the volume at a
moderate level, so that
you are better able to hear outside sound and are
considerate of the people around you.
6.! Keep the player away from sinks, drinks, bathtubs, showers, rain, and other
sources of
moisture. Moisture can cause electric shocks with any electronic
device.
7.! Follow these tips to keep the player working well for a long time:
•! Clean the player with a soft lint-free cloth.
•! Do not allow children to use the player unsupervised.
•! Never force any connector into the ports of the player or your computer.
Make sure
your connectors are the identical shape and size before you
connect.
•! Do not disassemble, crush, short-circuit, or incinerate the internal
rechargeable
battery as it may cause fire, injury, burns, or other hazards.
Disposal Instructions
Do not dispose of this device with unsorted waste. Improper disposal may be
harmful to the
environment and human health. Please refer to your local waste
authority for information on
return and collection systems in your area for
proper disposal of electronic products,
components, and accessories.
SanDisk Clip Jam MP3 Player Overview
!
2!
CHAPTER 2
This chapter describes the features and functionality of the SanDisk
Clip Jam MP3 player.
SanDisk Clip Jam MP3 Player Overview
Congratulations on your purchase of a SanDisk Clip Jam™ MP3 player!
Put the fun back into music-on-the-go with the compact and colorful Clip Jam
digital music player you can clip on and take anywhere. The bright one inch
screen and big navigation buttons make it easy to drag, drop and play files in
popular audio formats including AAC. Add even more music via the microSD™
card slot
1
for up to 18 hours
2
of big sound.
Features
•! Super lightweight wearable personal music player
•! Deep, rich sound quality
•! 8GB internal capacity with a built-in microSD™ card expansion slot
1
•! Big, bright readable screen and large navigation buttons
•! Up to 18 hour battery life
2
•! Available in neon bright red, purple, blue, green and glossy black
•! Play audio files in lots of formats (MP3, WMA (no DRM), AAC (DRM free
iTunes), and Audible (DRM only)
Minimum System Requirements
•! Windows® XP SP2 or Mac OS X 10.3 and Linux
•! USB 2.0 port (for hi-speed transfers and charging)
Package Contents
The Clip Jam MP3 Player is shipped with the following components:
•! SanDisk Clip Jam MP3 player
•! Earbuds
•! USB 2.0 Cable
•! Quick Start Guide
SanDisk Clip Jam MP3 Player Overview
!
3!
Clip Jam MP3 Player at a Glance
SanDisk Clip Jam MP3 Player Overview
!
4!
Playback Screen
1
Play/Pause
Displays the music or recording playback status.
2
Battery Indicator
Displays the battery status.
4
Artist name/ song
name
Displays the artist name and the song name
5
Song progress
Displays the progress of the current track
6
Song no./ all songs
Displays the current track song No./ total No. of song in
current
location
SanDisk Clip Jam MP3 Player Overview
!
5!
Main Menu Options:
Music – Browse and listen to artists, albums and playlists.
Radio
– Listen to FM broadcast radio and save presets.
Books
– Browse and listen to audiobooks DRM.
Card
– Optional microSD™ or microSDHC cards allow
extra storage and content. Card sold separately.
Settings
– View or customize the SanDisk player
features.
Folders
– Browse and listen to content saved in individual
folders.
SanDisk Clip Jam MP3 Player Overview
!
6!
Quick Tips: The battery CANNOT be overcharged.
Product Capacities
8GB*
Carry up to 2,000 songs
3
Notes:
*1GB=1,000,000,000 bytes. Actual user storage less.
1
Card not included; sold separately.
2
Based on continuous playback at 128 kbps MP3. Actual life and performance may vary upon usage and
settings; battery is not replaceable.
3
Based on 3.5 min. songs. Approximations: results may vary based on file attributes, and other factors.
Battery
The player comes with an internal rechargeable battery that can last up to 18
hours* during
typical use. To use the player for the very first time, you should
fully charge the battery. You
can charge your SanDisk player through the USB
port of your computer, a car adapter (not
included), or AC adapter (not
included).
*Based on continuous playback at 128 Kbps MP3. Actual life and performance
may vary
depending upon usage and settings. Battery not replaceable.
Charging
Before using the player, fully charge the device. To charge the battery, follow
these steps:
1.
!
Connect player to computer (computer must be on).
2.
!
A “Charging” icon will appear on the device while it is charging (shown
below). Full
charge takes up to three hours. When fully charged, battery
indicator will be solid
green and “Charged” message will appear.
3.
!
To stop charging, unplug device.
•! If your computer does not recognize the player, verify that you are using
Windows®
XP SP2 or Mac OS X 10.3 and Linux (mass storage class only),
restart the player, and
try again.
•! NOTE: When battery level reaches 20% device will notify: "Battery running
low", at 5%-
battery will turn off
SanDisk Clip Jam MP3 Player Overview
!
7!
Firmware Updater
SanDisk occasionally releases firmware updates, which may include new features
and
performance enhancements. SanDisk highly recommends updating the MP3
player to the
latest firmware. It is highly recommended to update the firmware
after the first battery
charge.
For the latest firmware, access http://www.sandisk.com/clipjam and follow these
steps:
1.! Click on the banner, “Download Firmware Updater.”
2.! Click on the downloader file and press “run.”
3.! Follow the step-by-step instructions to upgrade the firmware.
4.! Restart the player after firmware update is complete.
Earbuds
The player comes with adjustable earbuds that can be customized to fit various
ear sizes. To
properly fit earbuds, try different cups until you find the size that
fits most snugly in your ear.
Then slide cord fastener upward under chin to
tighten.
1.! To remove the earbud cup, hold the earbud and gently pull the cup away
from the
earbud stem. (Do not hold or pull on the earbud base or cord.)
2.! To replace the earbud cup, gently push the cup onto the earbud stem until it
fits
firmly into place.
Quick Tips: After the first download, the Updater will automatically
notify you of any new firmware updates. User manual is also
available via the Updater.
Basic Operation
!
8!
CHAPTER 3
This chapter describes basic user operation instructions for the
SanDisk Clip Jam MP3 player.
Basic Operation
Power/ Select Button
The Power button is located in the center of the player. It can be used to turn
the player on
or off, and also to select player options.
Power On
Press and hold the Power button for three seconds to turn on the player. The
last played
function screen from the Main Menu will appear after the device has
been powered on.
Power Off
Press and hold the Power button for three seconds to turn off the player.
Reset
If the player freezes for any reason, power off the player and then restart it
again. After you
perform the reset, any adjustments made during the last
operation will be lost. Your saved
content (e.g. Music Files, Audiobooks, etc.)
will not be deleted from the player.
Connecting Player to a Windows or Mac Computer
1.! To connect the player to a Windows computer, follow these steps:
2.! Connect the large end of the USB cable into an available USB port on the
computer.
3.! Connect the smaller end of the USB cable into the player’s dock connector.
4.! The display screen will show “Charging” (shown below).
5.! The player will appear in My Computer as “CLIP JAM.”
Basic Operation
!
9!
Disconnecting the Player from a Windows Computer
Simply disconnect the USB cable from the player after you have finished
charging,
transferring, or upgrading firmware.
Disconnecting the Player from a Mac Computer
Eject the removable disk by dragging the icon to the Trash and then disconnect
the USB cable
from the computer after you have finished charging, transferring,
or upgrading firmware.
CAUTION: Do not disconnect the player while it is transferring data.
Disconnecting the player from the computer during data transfer may damage
the device.
CAUTION: Do not disconnect the player while it is transferring data.
Disconnecting the player from the computer during data transfer may damage
the device.
Music
!
!
10!
Chapter 4
This chapter describes how to load music files from your computer
to the SanDisk Clip Jam MP3 player and play music on the device.
Music
The SanDisk Clip Jam MP3 player is able to store hundreds of songs in various
formats and provides multiple listening options that can be customized to suit
your
individual needs.
Loading Music
You can transfer music from your computer to the player using the drag-and-
drop
method.
Drag and Drop (Windows)
To drag-and-drop music to the player from a Windows computer, follow these
steps:
1.! Connect the player to your computer using the USB cable.
2.! Select Open device to view files using Windows Explorer on initial
connection or by going to My Computer.
3.! Double-click on the CLIP JAM icon.
4.! Double-click on the Music folder.
5.! Drag and drop music files from your computer to the player’s Music folder.
6.! If an optional microSD™ card is inserted inside the player, you can also drag
and drop
files to the card by double-clicking on the second removable disk
that appears when
you connect the player (My Computer > Removable
Device). The second removable
disk is displayed with the card’s name, just as
if you connected it via a card reader.
7.! You can only drag and drop files to the card if you have write permissions for
the card.
(Please refer to Chapter 7 for more details.)
8.! Visit the following link for step-by-step instructions:
http://kb.sandisk.com/app/answers/detail/a_id/946/
Note: Device will notify “refresh your media” for few seconds.
Music
!
!
11!
Drag and Drop (Mac)
To drag-and-drop music to the player from a Mac computer, follow these steps:
1.
!
Connect the player to your computer using the USB cable.
2.
!
Double-click on the removable disk icon named “CLIP JAM” that appears on
your desktop.
3.
!
Double-click on the Music folder.
4.
!
Drag and drop music files from your computer to the player’s Music folder.
5.
!
Visit the following link for step-by-step instructions:
http://kb.sandisk.com/app/answers/detail/a_id/1141/
If an optional microSD card is inserted inside the player, you can also drag and
drop
files to the card by double-clicking on the second removable disk that
appears when
you connect the player (My Computer > Removable Device). The
second removable
disk is displayed with the card’s name, just as if you
connected it via a card reader.
You can only drag and drop files to the card if you have write permissions for
the card.
(Please refer to Chapter 7 for more details.)
Playing Music
To play music, follow these steps:
1.! Select Music from the Main Menu.
2.! Select from the music content groupings: Shuffle, Artists, Albums,
Songs, and
Playlists.
•! Shuffle plays all content saved on the device in random order.
•! Artists shuffles artists or selects the artist’s name to show their songs.
•! Albums shuffles songs from all albums or enables scrolling to find desired
Albums. Once selected, the album songs will be listed.
•! Songs provides a list to select a song title, which are shown in alphabetical
order.
•! Playlists lists all song titles of content for playlist or GoList groups that
have been created.
Quick Tips: Remember to eject the removable disk using the Windows or Mac
eject before disconnecting the player.
Quick Tips: Under artists, songs, playlists, and albums pressing “Shuffle” will shuffle
all songs in music library, not just the songs under specific selected category of
artists, songs, playlists, or albums. In order to shuffle a single album, select one
specific album title and press select, then select Shuffle.
Music
!
!
12!
1.! Highlight and select the desired track or file to play from the music content
groupings.
2.! Press the Forward button to skip to the next song or press-and-hold to fast
forward.
3.! Press the Previous button once to go back to the beginning of the current
song
or press Previous button twice to go back to the previous song. Press-
and-hold
the Previous button to rewind.
4.! If the display screen does not show current song, then press the Back button
to
return to main menu.
5.! The following options are available during music playback by pressing the
6.! Options button to access the Options menu.
•! Add Song to GoList
•! Repeat
•! Shuffle
•! Music EQ
•! Delete Song
•! Track Info
Options Menu
When listening to music, the player offers seven options for personalizing your
listening experience (Add Song to GoList, Repeat, Shuffle,
Music EQ, Delete
Song, Track Info).
To select music options, follow these steps:
1.! Press the Options button while playing a song. The Options Menu will be
displayed.
2.! Customize the player with the following options.
Add Song to GoList
The GoList is an on-the-go optional playlist that enables you to quickly and
easily add
and remove songs to one of three available GoLists. Each GoList
holds up to 100 songs.
1.! Select Add Song to GoList, then select desired GoList.
2.! Press the Back button to return to the playback screen.
Quick Tips: Clearing the music GoList does not delete songs from the device. It merely
clears the content from the playlist that was saved locally to the device.
Music
!
!
13!
Repeat
This option repeats the song.
1.
!
Select Repeat.
2.
!
Press Select to toggle and choose a repeat mode:
•! Off: No repeat of tracks
•! Song: Repeat the current track
•! All: Repeat all selected tracks at the current menu location
3.
!
Press the Back button to return to the playback screen.
Shuffle
This option plays songs in random order.
1.
!
Select Shuffle.
2.
!
Press the Select button to toggle between Shuffle On and Shuffle Off (to
play
songs in random order, set Shuffle to ON).
3.
!
Press the Back button to return to the playback screen.
Music EQ
This option enhances the sound quality of certain music types to better match
the
genre being played.
1.
!
Select Music EQ.
2.
!
Press the Up or Down button to scroll through the music types and select a
desired option that best matches the music being played.
Delete Song
This option deletes a song from the player.
1.
!
Select Delete Song.
2.
!
Select Yes to confirm.
Track Info
This option displays information about the music being played.
1.
!
Select Track Info.
2.
!
Press the Up or Down button to scroll through the track information.
3.
!
Press the Back button to return to the playback screen.
Music
!
!
14!
Creating Playlists
How do I create a playlist on the Clip Jam?
The Clip Jam only supports M3U playlists and they must be stored in the same
directory as the files in the playlist. The process below gives instructions for
creating
an M3U playlist using Windows Media Player for the use on the Clip
Jam.
Step 1 - Move all the files you want in the play list into a folder on the computer
Music
!
!
15!
Step 2 - Drag the folder into Windows Media Player
Music
!
!
16!
Step 3 - Click the drop down menu and select "Save list as"
Step 4 - Brows to the same directory where the files you want in the playlist are
saved, choose M3U playlist as the file type, name the playlist and click save
Music
!
!
17!
You should now see the M3U playlist saved along side the songs you want in the
play list
Step 5 - Drag the entire folder containing the songs and the M3U playlist to the
Music
folder of the Clip Jam
The Playlist will now be available under the Playlist option in the Music menu.
Radio
!
!
18!
CHAPTER 5
This chapter describes how to listen to FM broadcast radio and
program the preset stations on the SanDisk Clip Jam MP3 player.
Radio
The SanDisk Clip Jam MP3 player includes an integrated FM radio for listening to
live
broadcast FM stations.
Listening to FM Radio
To listen to live broadcast FM stations, follow these steps:
1.! Select Radio from the Main Menu. A radio frequency menu will appear.
2.! Press the Previous button or Forward button to adjust and search for the
desired
station, or select preset by pressing the Select button.
3.! For fast search, press and hold the Previous button or the Forward button.
Programming FM Presets
You can program up 40 preset stations. To program the preset stations on the
player, follow
these steps:
1.! Press the Options button during Radio playback.
2.! Select Add Preset to save current frequency into presets, which can be found
under
View all Presets. Or while the earphones are connected, select Auto
Presets to
allow the player to automatically search and store the strongest
broadcast signals.
3.! Select View All Presets to view all stored added presets.
Quick Tips:
Your headphones are the antenna for your device. For best reception or
maximizing the number of presets your device can find, extend the
headphone cord as much as possible to increase the antenna length
and therefore, reception.
Pressing play/pause during a radio broadcast is the equivalent of
muting the radio. There is no dynamic, live pausing capability on the
SanDisk Clip Jam MP3 player.
Books
!
!
19!
Chapter 6
This chapter describes how to load and play audiobooks and
podcasts on the SanDisk Clip Jam MP3 player.
Books
The SanDisk Clip Jam MP3 player is able to store multiple audiobooks and
podcasts. An
audiobook is a recorded book in .mp3 format and a podcast is a
recorded broadcast in .mp3
format.
Note that the SanDisk Clip Jam Player is only compatible with Audible books.
Loading Audiobooks and Podcasts
You can transfer audio files from your computer to the player using the drag-
and-drop method.
Drag and Drop (Windows)
To drag-and-drop audio files to the player from a Windows computer, follow
these steps:
1.! Connect the player to your computer using the USB cable.
2.! Select Open device to view files using Windows Explorer on initial connection
or
by going to My Computer.
3.! Double-click on the CLIP JAMS icon.
4.! Double-click on the Audible folder.
5.! Drag and drop Audible files from your computer to the player’s Audible
folder.
If an optional microSD™ card is inserted inside the player, you can also drag and
drop files to
the card by double-clicking on the second removable disk that
appears when you connect the
player (My Computer > Removable Device). The
second removable disk is displayed with
the card’s name, just as if you
connected it via a card reader. You can only drag and drop files
to the card if
you have write permissions for the card. (Please refer to Chapter 7 for more
details.)
Quick Tips: Remember to eject the removable disk before disconnecting the player.
Books
!
!
20!
Drag and Drop (Mac)
To drag-and-drop audio files to the player from a Mac computer, follow these
steps:
1.! Connect the player to your computer using the USB cable.
2.! Double-click on the CLIP JAM icon that appears on your desktop.
3.! Double-click on the Audible folder.
4.! Drag and drop audio files from your computer to the player’s Audible folder.
5.! Visit the following link for step-by-step instructions:
http://kb.sandisk.com/app/answers/detail/a_id/1141/kw/1141
If an optional microSD™ card is inserted inside the player, you can also drag and
drop files to
the card by double-clicking on the second removable disk that
appears when you connect the
player (My Computer > Removable Device). The
second removable disk is displayed with
the card’s name, just as if you
connected it via a card reader. You can only drag and drop files
to the card if
you have write permissions for the card. (Please refer to Chapter 7 for more
details.)
Playing Audiobooks and Podcasts
Audiobooks
1.! To play audiobooks, follow these steps:
2.! Select Books from the Main Menu.
3.! Select Audiobooks, then select Audible. Audiobooks are listed in A-Z order.
4.! Select desired audiobook.
5.! Select desired Chapters. After Chapter is selected, audiobook will play and
audiobook name/chapter will be displayed.
6.! The following options are available during playback by pressing the Options
button:
•! Speed: Select between normal, fast or slow.
•! Chapter Skip: Select between off or on whether you want the book to
keep its
place when you skip between chapters.
•! Delete Audiobook: Select between yes or no to delete audiobook from the
player. Deleting audiobook from player will not permanently delete the
content
from your computer.
Quick Tips: Remember to eject the removable disk before disconnecting
the player.
Books
!
!
21!
Quick Tips: if you stop playing an audibook before it finishes, your player
will create a .pos file, it is to save the resume point and it is not a
playable file. This file will be seen only under folder view.
Podcasts
To play podcasts, follow these steps:
1.! Select Books from the Main Menu.
2.! Select Podcasts. Podcasts are listed in A-Z order.
3.! Select desired Episodes, which are listed in newest to oldest order. After
Episode is
selected, podcast will play and podcast name/episode will be
displayed.
4.! The following options are available during playback by pressing the Options
button:
•! Speed: Select between normal, fast or slow.
•! Delete Podcast: Select between yes or no to delete podcast from the
player.
Deleting podcast from the player will not permanently delete the
content from
your computer.
Quick Tips: to ensure files sorter correctly, file should not exceed 16
characters long or use ID3 tags. Also, to make sure your book seen
under audiable section, place your audiobook under the audiobook
folder.
Card
!
!
22!
Chapter 7
This chapter describes how to play music from a preloaded
microSDHC Card with content for expanded storage.
Card
The SanDisk Clip Jam MP3 player accepts a microSDHC card that provides extra
storage
for content, enabling the card to become a portable content holder.
Books and music can
be loaded from a computer to the microSDHC card in the
same manner they are loaded to
the player. (Please refer to Chapters 3 and 6
for content loading details.) The microSDHC
card is sold separately and is not
required for using the SanDisk Clip Jam MP3 Player.
microSDHC™ Card
1.! Insert a microSDHC card
loaded with audio content files
into the microSDHC
card slot.
2.! Select Card from the Main
Menu. The display screen will
show “Refreshing
your media” and a content menu appears.
3.! Select Artists, Albums,
Songs, or Books to navigate
to the desired content.
4.! Alternately, from the Folders
Menu, select Folders >
External Card, and
navigate
through folders to desired
content.
Note: You can access your card content from
the card menu.
Additional Information
The SanDisk Clip Jam MP3 player is capable of working with microSDHC cards
up
to 32GB. The player can store up to 40GB* of total device content including
internal memory (e.g., 8GB player with a 32GB card).
* 1GB=1,000,000,000 bytes. Actual user storage less.
Quick Tips: The microSDHC logo on the actual card (sold
separately) will appear upside- down when properly oriented for
inserting into the microSDHC card slot.
Quick Tips:
For higher capacity of content, the device will take longer to load.
Player Settings
!
!
23!
Chapter 8
This chapter describes how to customize the SanDisk Clip Jam MP3
player’s settings.
Settings
The SanDisk Clip Jam MP3 player has multiple settings that allow you to
customize the
device to match your own personal listening preferences.
System Settings
To select system setting options, follow these steps:
1.! Select Settings from the Main Menu.
2.! Select System Settings.
3.! Customize the player with the following options:
•! Backlight
•! Brightness
•! Power Saver
•! Sleep
•! Customize
•! Menu Looping
•! Equalizer
•! Replay Gain
•! Language
•! Date
•! Time
•! Volume
•! Info
•! Format
•! Restore
Backlight
This option selects the time that the player will trigger the backlight timer
program to
automatically turn off the backlight. You can press any button to re-
activate the
backlight.
1.! Select Backlight.
2.! Press the Previous or Forward buttons to select desired backlight timer (15
seconds to 90 seconds).
Player Settings
!
!
24!
Brightness
This option adjusts the display brightness for better viewing in different lighting
environments.
1.
!
Select Brightness.
2.
!
Press the Previous or Forward buttons to set the contrast level (20% to
100%).
3.
!
Press the Select button to confirm choice.
Power Saver
This option turns the player off automatically when it has been idle for a defined
period of
time.
1.
!
Select Power Saver.
2.
!
Press the Previous or Forward buttons to select desired time (None to 120
minutes) before power off. The player will not enter the power saver mode
if it is
set to None.
3.
!
Press the Select button to confirm choice.
Sleep
This option turns the player off automatically after a defined period of playback
time.
1.
!
Select Sleep.
2.
!
Press the Previous or Forward buttons to select desired playback time
before
power off (None to 120 minutes). The player will not enter the sleep
mode if it is
set to None.
3.
!
Press the Select button to confirm choice.
Player Settings
!
!
25!
Customize
This option removes player home features from the Main Menu.
1.
!
Select Customize.
2.
!
Select the name of the feature you want removed.
3.
!
Press the Select button to toggle between On or Off.
4.
!
Press the Back button to return to previous menu.
Menu Looping
This option enables continuous menu scrolling, or looping, without stopping at
the end
and beginning of a menu.
1.
!
Select Menu Looping.
2.
!
Press the Select button to toggle between On or Off.
Equalizer
This option enhances the sound quality of certain music types to better match
the genre
being played.
1.
!
Select Equalizer.
2.
!
Press the Up or Down buttons to scroll through the music types.
3.
!
Press the Select button to choose the desired option that best matches the
music
being played.
Player Settings
!
!
26!
Replay Gain
This option provides a method for keeping the perceived volume level constant
during
playback of content. Typically, music albums are mixed and targeted to
differing average
levels. During playback in shuffle mode there can be wide
differences in the track
volume, causing the user to make frequent corrections
to the volume level.
1.! Select Replay Gain.
2.! Select Mode and press the Select button to choose between Songs, Albums,
or Off.
3.! Select Pre-Gain and press the Select button to choose how many decibels
(dB)
you want to adjust the overall Playback Volume level upward to
compensate for
the “average” level of your library’s track adjustment.
Language
This option selects different languages for the player’s display screen.
1.! Select Language.
2.! Press the Up or Down buttons to scroll through languages.
3.! Press the Select button to choose desired language.
Date
This option selects the date.
1.! Select Date.
2.! Press the Previous or Forward buttons to select the day, month, or year.
3.! Select the Up button to increase numbers or Down button to decrease
numbers,
respectively.
4.! Press the Select button after final date has been set.
Quick Tips: European users be aware of the Europeans limits of volume
within the laws and regulations of the European Union.
Quick Tips: For more information, please visit:
http://kb.sandisk.com/app/answers/detail/a_id/430
!
Quick Tips: The date format will be set according to your initial device
regional settings. For the Americas region, date will show
month/day/year. For other regions, date will show day/month/year.
Player Settings
!
!
27!
Time
This option selects the time.
1.! Select Time.
2.! Press the Previous or Forward buttons to select the hour, minute, or second.
3.! Select Up to increase numbers or Down to decrease numbers, respectively.
4.! Press the Select button after final time has been set.
Volume
This option adjust the volume.
1.
!
Select Volume.
2.
!
Select Normal or High.
3.
!
Press the Select button to choose the desired option.
Info
This option displays player information, such as firmware version, available/free
memory,
number of contents loaded in the player, and the battery status.
1.
!
Select Info.
2.
!
Press the Up or Down buttons to scroll through information.
Player Settings
!
!
28!
Format
1.
!
Select Format.
2.
!
Select Internal Memory, External Memory, or All.
3.
!
Choose desired option by selecting Yes or No.
4.
!
Press the Select button to confirm, or press the Back button to return to the
previous menu.
Restore
This option restores the player to the original factory settings it had when the
device was
first purchased.
1.
!
Select Restore.
2.
!
Choose desired option by selecting Yes or No.
3.
!
Press the Select button to confirm, or press the Back button to return to the
previous menu.
CAUTION: This option will delete all the files stored on the
player. Ensure that you back up all the media files on the
player before formatting the device. All media files will have to
re-transferred the device after you have formatted it.
CAUTION: This option will delete all customized settings from the player.
Player Settings
!
!
29!
Music Options
To select music options, follow these steps:
1.! Select Settings from the Main Menu.
2.! Select Music Options.
3.! Customize the player with the following options:
•! Shuffle
•! Repeat
Shuffle
This option plays songs in random order.
1.! Select Shuffle.
2.! Press the Select button to toggle between Shuffle On and Shuffle Off (to play
songs in random order, set Shuffle to ON).
Repeat
This option repeats the song.
1.! Select Repeat.
2.! Press Select to toggle and choose a repeat mode:
•! Off: No repeat of tracks
•! Song: Repeat the current track
•! All: Repeat all selected tracks at the current menu location
Audiobook and Podcast Options
To select audiobook and podcast options, follow these steps:
1.! Select Settings from the Main Menu.
2.! Select Audibook Options or Podcast Options.
3.! Customize the player with the following option.
Quick Tips: While on shuffle mode, Forward and Backwards will randomly select a song.
Quick Tips: If music is currently playing, the Options Menu can be accessed by
pressing the Options button when the playback screen is open. Music options
include: Add Song To GoList, Remove Song From GoList, Repeat, Shuffle, Music EQ,
Delete Song, and Track Info. Please refer to Chapter 4 for more details.
Player Settings
!
!
30!
Speed
This option controls the pace of the content when it is being played.
1.! Select Speed.
2.! Press the Select button to toggle between Normal, Fast, and Slow playback.
Radio Options
To select radio options, follow these steps:
1.! Select Settings from the Main Menu.
2.! Select Radio Options.
3.! Customize the player with the following options:
•! Delete All Presets
•! FM Mode
Delete All Presets
This option deletes all preset radio stations.
1.! Select Delete All Presets.
2.! Choose desired option by selecting Yes or No.
3.! Press the Select button to confirm, or press the Back button to return to
previous
menu.
FM Mode
This option selects stereo or mono radio mode.
1.! Select FM Mode.
2.! Press the Select button to toggle between Stereo or Mono.
3.! Press the Back button to return to previous menu.
Service & Warranty
!
!
31!
Chapter 9
This chapter describes how to get service and support for the
SanDisk Clip Jam MP3 player.
Learn More, Service, and Warranty
Information
Getting Technical Support
If you have questions about the use or features of your SanDisk player as well as
other
SanDisk products, please visit our Knowledgebase at kb.sandisk.com or
www.sandisk.com/support .
THIRD PARTY INTELLECTUAL PROPERTY NOTICE
This product is protected by certain intellectual property rights of Microsoft
Corporation. Use or
distribution of such technology outside of this product is
prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
Content providers are using the digital rights
management technology for Windows
Media contained in this device (“WM-DRM”) to protect
the integrity of their content
(“Secure Content”) so that their intellectual property, including
copyright, in such
content is not misappropriated. This device uses WM-DRM software to play
Secure
Content (“WM-DRM Software”). If the security of the WM-DRM Software in this
device
has been compromised, owners of Secure Content (“Secure Content
Owners”) may request that
Microsoft revoke the WM-DRM Software’s rights to
acquire new licenses to copy display and/or
play Secure Content. Revocation does
not alter the WM-DRM Software’s ability to play
unprotected content. A list of
revoked WM-DRM Software is sent to your device whenever you
download a license for Secure Content from the Internet or from a PC. Microsoft, may, in
conjunction with such license, also download revocation lists onto your device on behalf of
Secure Content Owners.
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT
PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN
COMPLIANCE WITH THE MPEG-4
VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO
THAT WAS
ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON
COMMERCIAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED BY MPEG LA TO PROVIDE
MPEG-4 VIDEO. NO LICENSE IS GRANTED
OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT
RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL
USES AND LICENSING MAY BE
OBTAINED FROM MPEGLA, LLC.
SEE HTTP://WWW.MPEGLA.COM.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS
and Thompson.
Service & Warranty
!
!
32!
SanDisk Manufacturer’s Limited Warranty
For Technical Support over the Internet, visit: www.sandisk.com/wug
FCC REGULATION
This device complies with part 15 of the FCC Rules. Operation is subject to
the
following two conditions:
1.! This device may not cause harmful interference, and
2.! This device must accept any interference received, including interference
that may cause undesired operation.
3.! This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
4.! However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and then
on, the user is encouraged to try to correct the interference by one or more
of
the following measures:
5.! Increase the separation between the equipment and receiver.
6.! Correct the equipment to a different outlet so that the equipment and
receiver are on different branch circuits.
7.! Consult the dealer or an experienced radio / TV technician for help.
To prevent possible hearing damage, do not
listen to high volume levels for long periods.
SanDisk, Clip Jam and others are trademarks of SanDisk Corporation. The
microSD mark is a trademark of SD-3C, LLC. Other brand names mentioned
herein are for identification purposes only and may be the trademarks of their
respective holder(s).
©2015 SanDisk Corporation.
/