SanDisk SDMX26-008G-G46B Handleiding

Merk: SanDisk

Model: SDMX26-008G-G46B

Categorie: MP3 / MP4-spelers

Type: Handleiding

Deze handleiding is ook geschikt voor

May 2015

SanDisk® Clip Jam™

User Manual

CHAPTER 1! 1!

Safety Tips and Cleaning Instructions

! 1!

Disposal Instructions! 1!

CHAPTER 2! 2!

SanDisk Clip Jam MP3 Player Overview

! 2!

Features! 2!

Minimum System Requirements! 2!

Package Contents! 2!

Clip Jam MP3 Player at a Glance! 3!

Main Menu Options:! 5!

Product Capacities! 6!

Battery! 6!

Charging! 6!

Firmware Updater! 7!

Earbuds! 7!

CHAPTER 3! 8!

Basic Operation

! 8!

Power/ Select Button! 8!

Power On! 8!

Power Off! 8!

Reset! 8!

Connecting Player to a Windows or Mac Computer! 8!

Disconnecting the Player from a Windows Computer! 9!

Disconnecting the Player from a Mac Computer! 9!

Chapter 4! 10!

Music

! 10!

Loading Music! 10!

Drag and Drop (Windows)! 10!

Drag and Drop (Mac)! 11!

Playing Music! 11!

Options Menu! 12!

Creating Playlists! 14!

CHAPTER 5! 18!

Radio

! 18!

Listening to FM Radio! 18!

Programming FM Presets! 18!

Chapter 6! 19!

Books

! 19!

Loading Audiobooks and Podcasts! 19!

Drag and Drop (Windows)! 19!

Drag and Drop (Mac)! 20!

Playing Audiobooks and Podcasts! 20!

Chapter 7! 22!

Card

! 22!

microSDHC™ Card! 22!

Chapter 8! 23!

Settings

! 23!

System Settings! 23!

Music Options! 29!

Audiobook and Podcast Options! 29!

Radio Options! 30!

Chapter 9! 31!

Learn More, Service, and Warranty

Information

! 31!

THIRD PARTY INTELLECTUAL PROPERTY NOTICE! 31!

SanDisk Manufacturer’s Limited Warranty! 32!

FCC REGULATION! 32!

Safety Tips, Cleaning & Instructions

CHAPTER 1

This chapter describes the safety tips and cleaning instructions for

the SanDisk Clip Jam MP3 player.

Safety Tips and Cleaning Instructions

1.! Read the safety instructions carefully before using the player.

2.! Review this entire manual to ensure proper usage.

3.! Keep this User Manual for future reference.

4.! Do not use headphones/earphones while driving, cycling, or operating any

motorized

vehicle. This may create a traffic hazard and may be illegal in

some areas. It can also be

dangerous to play your music with

headphones/earphones at high volume while walking,

or engaged in other

activities. You should exercise extreme caution and discontinue use in

potentially hazardous situations.

5.! Avoid using headphones/earphones at high volume. Hearing experts advise

against

continuous loud and extended music play. Keep the volume at a

moderate level, so that

you are better able to hear outside sound and are

considerate of the people around you.

6.! Keep the player away from sinks, drinks, bathtubs, showers, rain, and other

sources of

moisture. Moisture can cause electric shocks with any electronic

device.

7.! Follow these tips to keep the player working well for a long time:

•! Clean the player with a soft lint-free cloth.

•! Do not allow children to use the player unsupervised.

•! Never force any connector into the ports of the player or your computer.

Make sure

your connectors are the identical shape and size before you

connect.

•! Do not disassemble, crush, short-circuit, or incinerate the internal

rechargeable

battery as it may cause fire, injury, burns, or other hazards.

Disposal Instructions

Do not dispose of this device with unsorted waste. Improper disposal may be

harmful to the

environment and human health. Please refer to your local waste

authority for information on

return and collection systems in your area for

proper disposal of electronic products,

components, and accessories.

SanDisk Clip Jam MP3 Player Overview

CHAPTER 2

This chapter describes the features and functionality of the SanDisk

Clip Jam MP3 player.

SanDisk Clip Jam MP3 Player Overview

Congratulations on your purchase of a SanDisk Clip Jam™ MP3 player!

Put the fun back into music-on-the-go with the compact and colorful Clip Jam

digital music player you can clip on and take anywhere. The bright one inch

screen and big navigation buttons make it easy to drag, drop and play files in

popular audio formats including AAC. Add even more music via the microSD™

card slot

for up to 18 hours

of big sound.

Features

•! Super lightweight wearable personal music player

•! Deep, rich sound quality

•! 8GB internal capacity with a built-in microSD™ card expansion slot

•! Big, bright readable screen and large navigation buttons

•! Up to 18 hour battery life

•! Available in neon bright red, purple, blue, green and glossy black

•! Play audio files in lots of formats (MP3, WMA (no DRM), AAC (DRM free

iTunes), and Audible (DRM only)

Minimum System Requirements

•! Windows® XP SP2 or Mac OS X 10.3 and Linux

•! USB 2.0 port (for hi-speed transfers and charging)

Package Contents

The Clip Jam MP3 Player is shipped with the following components:

•! SanDisk Clip Jam MP3 player

•! Earbuds

•! USB 2.0 Cable

•! Quick Start Guide

SanDisk Clip Jam MP3 Player Overview

Clip Jam MP3 Player at a Glance

SanDisk Clip Jam MP3 Player Overview

Playback Screen

Play/Pause

Displays the music or recording playback status.

Battery Indicator

Displays the battery status.

Artist name/ song

name

Displays the artist name and the song name

Song progress

Displays the progress of the current track

Song no./ all songs

Displays the current track song No./ total No. of song in

current

location

SanDisk Clip Jam MP3 Player Overview

Main Menu Options:

Music – Browse and listen to artists, albums and playlists.

Radio

– Listen to FM broadcast radio and save presets.

Books

– Browse and listen to audiobooks DRM.

Card

– Optional microSD™ or microSDHC cards allow

extra storage and content. Card sold separately.

Settings

– View or customize the SanDisk player

features.

Folders

– Browse and listen to content saved in individual

folders.

SanDisk Clip Jam MP3 Player Overview

Quick Tips: The battery CANNOT be overcharged.

Product Capacities

8GB*

Carry up to 2,000 songs

Notes:

*1GB=1,000,000,000 bytes. Actual user storage less.

Card not included; sold separately.

Based on continuous playback at 128 kbps MP3. Actual life and performance may vary upon usage and

settings; battery is not replaceable.

Based on 3.5 min. songs. Approximations: results may vary based on file attributes, and other factors.

Battery

The player comes with an internal rechargeable battery that can last up to 18

hours* during

typical use. To use the player for the very first time, you should

fully charge the battery. You

can charge your SanDisk player through the USB

port of your computer, a car adapter (not

included), or AC adapter (not

included).

*Based on continuous playback at 128 Kbps MP3. Actual life and performance

may vary

depending upon usage and settings. Battery not replaceable.

Charging

Before using the player, fully charge the device. To charge the battery, follow

these steps:

Connect player to computer (computer must be on).

A “Charging” icon will appear on the device while it is charging (shown

below). Full

charge takes up to three hours. When fully charged, battery

indicator will be solid

green and “Charged” message will appear.

To stop charging, unplug device.

•! If your computer does not recognize the player, verify that you are using

Windows®

XP SP2 or Mac OS X 10.3 and Linux (mass storage class only),

restart the player, and

try again.

•! NOTE: When battery level reaches 20% device will notify: "Battery running

low", at 5%-

battery will turn off

SanDisk Clip Jam MP3 Player Overview

Firmware Updater

SanDisk occasionally releases firmware updates, which may include new features

and

performance enhancements. SanDisk highly recommends updating the MP3

player to the

latest firmware. It is highly recommended to update the firmware

after the first battery

charge.

For the latest firmware, access http://www.sandisk.com/clipjam and follow these

steps:

1.! Click on the banner, “Download Firmware Updater.”

2.! Click on the downloader file and press “run.”

3.! Follow the step-by-step instructions to upgrade the firmware.

4.! Restart the player after firmware update is complete.

Earbuds

The player comes with adjustable earbuds that can be customized to fit various

ear sizes. To

properly fit earbuds, try different cups until you find the size that

fits most snugly in your ear.

Then slide cord fastener upward under chin to

tighten.

1.! To remove the earbud cup, hold the earbud and gently pull the cup away

from the

earbud stem. (Do not hold or pull on the earbud base or cord.)

2.! To replace the earbud cup, gently push the cup onto the earbud stem until it

fits

firmly into place.

Quick Tips: After the first download, the Updater will automatically

notify you of any new firmware updates. User manual is also

available via the Updater.

Basic Operation

CHAPTER 3

This chapter describes basic user operation instructions for the

SanDisk Clip Jam MP3 player.

Basic Operation

Power/ Select Button

The Power button is located in the center of the player. It can be used to turn

the player on

or off, and also to select player options.

Power On

Press and hold the Power button for three seconds to turn on the player. The

last played

function screen from the Main Menu will appear after the device has

been powered on.

Power Off

Press and hold the Power button for three seconds to turn off the player.

Reset

If the player freezes for any reason, power off the player and then restart it

again. After you

perform the reset, any adjustments made during the last

operation will be lost. Your saved

content (e.g. Music Files, Audiobooks, etc.)

will not be deleted from the player.

Connecting Player to a Windows or Mac Computer

1.! To connect the player to a Windows computer, follow these steps:

2.! Connect the large end of the USB cable into an available USB port on the

computer.

3.! Connect the smaller end of the USB cable into the player’s dock connector.

4.! The display screen will show “Charging” (shown below).

5.! The player will appear in My Computer as “CLIP JAM.”

Basic Operation

Disconnecting the Player from a Windows Computer

Simply disconnect the USB cable from the player after you have finished

charging,

transferring, or upgrading firmware.

Disconnecting the Player from a Mac Computer

Eject the removable disk by dragging the icon to the Trash and then disconnect

the USB cable

from the computer after you have finished charging, transferring,

or upgrading firmware.

CAUTION: Do not disconnect the player while it is transferring data.

Disconnecting the player from the computer during data transfer may damage

the device.

CAUTION: Do not disconnect the player while it is transferring data.

Disconnecting the player from the computer during data transfer may damage

the device.

Music

10!

Chapter 4

This chapter describes how to load music files from your computer

to the SanDisk Clip Jam MP3 player and play music on the device.

Music

The SanDisk Clip Jam MP3 player is able to store hundreds of songs in various

formats and provides multiple listening options that can be customized to suit

your

individual needs.

Loading Music

You can transfer music from your computer to the player using the drag-and-

drop

method.

Drag and Drop (Windows)

To drag-and-drop music to the player from a Windows computer, follow these

steps:

1.! Connect the player to your computer using the USB cable.

2.! Select Open device to view files using Windows Explorer on initial

connection or by going to My Computer.

3.! Double-click on the CLIP JAM icon.

4.! Double-click on the Music folder.

5.! Drag and drop music files from your computer to the player’s Music folder.

6.! If an optional microSD™ card is inserted inside the player, you can also drag

and drop

files to the card by double-clicking on the second removable disk

that appears when

you connect the player (My Computer > Removable

Device). The second removable

disk is displayed with the card’s name, just as

if you connected it via a card reader.

7.! You can only drag and drop files to the card if you have write permissions for

the card.

(Please refer to Chapter 7 for more details.)

8.! Visit the following link for step-by-step instructions:

http://kb.sandisk.com/app/answers/detail/a_id/946/

Note: Device will notify “refresh your media” for few seconds.

Music

11!

Drag and Drop (Mac)

To drag-and-drop music to the player from a Mac computer, follow these steps:

Connect the player to your computer using the USB cable.

Double-click on the removable disk icon named “CLIP JAM” that appears on

your desktop.

Double-click on the Music folder.

Drag and drop music files from your computer to the player’s Music folder.

Visit the following link for step-by-step instructions:

http://kb.sandisk.com/app/answers/detail/a_id/1141/

If an optional microSD card is inserted inside the player, you can also drag and

drop

files to the card by double-clicking on the second removable disk that

appears when

you connect the player (My Computer > Removable Device). The

second removable

disk is displayed with the card’s name, just as if you

connected it via a card reader.

You can only drag and drop files to the card if you have write permissions for

the card.

(Please refer to Chapter 7 for more details.)

Playing Music

To play music, follow these steps:

1.! Select Music from the Main Menu.

2.! Select from the music content groupings: Shuffle, Artists, Albums,

Songs, and

Playlists.

•! Shuffle plays all content saved on the device in random order.

•! Artists shuffles artists or selects the artist’s name to show their songs.

•! Albums shuffles songs from all albums or enables scrolling to find desired

Albums. Once selected, the album songs will be listed.

•! Songs provides a list to select a song title, which are shown in alphabetical

order.

•! Playlists lists all song titles of content for playlist or GoList groups that

have been created.

Quick Tips: Remember to eject the removable disk using the Windows or Mac

eject before disconnecting the player.

Quick Tips: Under artists, songs, playlists, and albums pressing “Shuffle” will shuffle

all songs in music library, not just the songs under specific selected category of

artists, songs, playlists, or albums. In order to shuffle a single album, select one

specific album title and press select, then select Shuffle.

Music

12!

1.! Highlight and select the desired track or file to play from the music content

groupings.

2.! Press the Forward button to skip to the next song or press-and-hold to fast

forward.

3.! Press the Previous button once to go back to the beginning of the current

song

or press Previous button twice to go back to the previous song. Press-

and-hold

the Previous button to rewind.

4.! If the display screen does not show current song, then press the Back button

return to main menu.

5.! The following options are available during music playback by pressing the

6.! Options button to access the Options menu.

•! Add Song to GoList

•! Repeat

•! Shuffle

•! Music EQ

•! Delete Song

•! Track Info

Options Menu

When listening to music, the player offers seven options for personalizing your

listening experience (Add Song to GoList, Repeat, Shuffle,

Music EQ, Delete

Song, Track Info).

To select music options, follow these steps:

1.! Press the Options button while playing a song. The Options Menu will be

displayed.

2.! Customize the player with the following options.

Add Song to GoList

The GoList is an on-the-go optional playlist that enables you to quickly and

easily add

and remove songs to one of three available GoLists. Each GoList

holds up to 100 songs.

1.! Select Add Song to GoList, then select desired GoList.

2.! Press the Back button to return to the playback screen.

Quick Tips: Clearing the music GoList does not delete songs from the device. It merely

clears the content from the playlist that was saved locally to the device.

Music

13!

Repeat

This option repeats the song.

Select Repeat.

Press Select to toggle and choose a repeat mode:

•! Off: No repeat of tracks

•! Song: Repeat the current track

•! All: Repeat all selected tracks at the current menu location

Press the Back button to return to the playback screen.

Shuffle

This option plays songs in random order.

Select Shuffle.

Press the Select button to toggle between Shuffle On and Shuffle Off (to

play

songs in random order, set Shuffle to ON).

Press the Back button to return to the playback screen.

Music EQ

This option enhances the sound quality of certain music types to better match

the

genre being played.

Select Music EQ.

Press the Up or Down button to scroll through the music types and select a

desired option that best matches the music being played.

Delete Song

This option deletes a song from the player.

Select Delete Song.

Select Yes to confirm.

Track Info

This option displays information about the music being played.

Select Track Info.

Press the Up or Down button to scroll through the track information.

Press the Back button to return to the playback screen.

Music

14!

Creating Playlists

How do I create a playlist on the Clip Jam?

The Clip Jam only supports M3U playlists and they must be stored in the same

directory as the files in the playlist. The process below gives instructions for

creating

an M3U playlist using Windows Media Player for the use on the Clip

Jam.

Step 1 - Move all the files you want in the play list into a folder on the computer

Music

15!

Step 2 - Drag the folder into Windows Media Player

Music

16!

Step 3 - Click the drop down menu and select "Save list as"

Step 4 - Brows to the same directory where the files you want in the playlist are

saved, choose M3U playlist as the file type, name the playlist and click save

Music

17!

You should now see the M3U playlist saved along side the songs you want in the

play list

Step 5 - Drag the entire folder containing the songs and the M3U playlist to the

Music

folder of the Clip Jam

The Playlist will now be available under the Playlist option in the Music menu.

Radio

18!

CHAPTER 5

This chapter describes how to listen to FM broadcast radio and

program the preset stations on the SanDisk Clip Jam MP3 player.

Radio

The SanDisk Clip Jam MP3 player includes an integrated FM radio for listening to

live

broadcast FM stations.

Listening to FM Radio

To listen to live broadcast FM stations, follow these steps:

1.! Select Radio from the Main Menu. A radio frequency menu will appear.

2.! Press the Previous button or Forward button to adjust and search for the

desired

station, or select preset by pressing the Select button.

3.! For fast search, press and hold the Previous button or the Forward button.

Programming FM Presets

You can program up 40 preset stations. To program the preset stations on the

player, follow

these steps:

1.! Press the Options button during Radio playback.

2.! Select Add Preset to save current frequency into presets, which can be found

under

View all Presets. Or while the earphones are connected, select Auto

Presets to

allow the player to automatically search and store the strongest

broadcast signals.

3.! Select View All Presets to view all stored added presets.

Quick Tips:

Your headphones are the antenna for your device. For best reception or

maximizing the number of presets your device can find, extend the

headphone cord as much as possible to increase the antenna length

and therefore, reception.

Pressing play/pause during a radio broadcast is the equivalent of

muting the radio. There is no dynamic, live pausing capability on the

SanDisk Clip Jam MP3 player.

Books

19!

Chapter 6

This chapter describes how to load and play audiobooks and

podcasts on the SanDisk Clip Jam MP3 player.

Books

The SanDisk Clip Jam MP3 player is able to store multiple audiobooks and

podcasts. An

audiobook is a recorded book in .mp3 format and a podcast is a

recorded broadcast in .mp3

format.

Note that the SanDisk Clip Jam Player is only compatible with Audible books.

Loading Audiobooks and Podcasts

You can transfer audio files from your computer to the player using the drag-

and-drop method.

Drag and Drop (Windows)

To drag-and-drop audio files to the player from a Windows computer, follow

these steps:

1.! Connect the player to your computer using the USB cable.

2.! Select Open device to view files using Windows Explorer on initial connection

by going to My Computer.

3.! Double-click on the CLIP JAMS icon.

4.! Double-click on the Audible folder.

5.! Drag and drop Audible files from your computer to the player’s Audible

folder.

If an optional microSD™ card is inserted inside the player, you can also drag and

drop files to

the card by double-clicking on the second removable disk that

appears when you connect the

player (My Computer > Removable Device). The

second removable disk is displayed with

the card’s name, just as if you

connected it via a card reader. You can only drag and drop files

to the card if

you have write permissions for the card. (Please refer to Chapter 7 for more

details.)

Quick Tips: Remember to eject the removable disk before disconnecting the player.

Books

20!

Drag and Drop (Mac)

To drag-and-drop audio files to the player from a Mac computer, follow these

steps:

1.! Connect the player to your computer using the USB cable.

2.! Double-click on the CLIP JAM icon that appears on your desktop.

3.! Double-click on the Audible folder.

4.! Drag and drop audio files from your computer to the player’s Audible folder.

5.! Visit the following link for step-by-step instructions:

http://kb.sandisk.com/app/answers/detail/a_id/1141/kw/1141

If an optional microSD™ card is inserted inside the player, you can also drag and

drop files to

the card by double-clicking on the second removable disk that

appears when you connect the

player (My Computer > Removable Device). The

second removable disk is displayed with

the card’s name, just as if you

connected it via a card reader. You can only drag and drop files

to the card if

you have write permissions for the card. (Please refer to Chapter 7 for more

details.)

Playing Audiobooks and Podcasts

Audiobooks

1.! To play audiobooks, follow these steps:

2.! Select Books from the Main Menu.

3.! Select Audiobooks, then select Audible. Audiobooks are listed in A-Z order.

4.! Select desired audiobook.

5.! Select desired Chapters. After Chapter is selected, audiobook will play and

audiobook name/chapter will be displayed.

6.! The following options are available during playback by pressing the Options

button:

•! Speed: Select between normal, fast or slow.

•! Chapter Skip: Select between off or on whether you want the book to

keep its

place when you skip between chapters.

•! Delete Audiobook: Select between yes or no to delete audiobook from the

player. Deleting audiobook from player will not permanently delete the

content

from your computer.

Quick Tips: Remember to eject the removable disk before disconnecting

the player.

Books

21!

Quick Tips: if you stop playing an audibook before it finishes, your player

will create a .pos file, it is to save the resume point and it is not a

playable file. This file will be seen only under folder view.

Podcasts

To play podcasts, follow these steps:

1.! Select Books from the Main Menu.

2.! Select Podcasts. Podcasts are listed in A-Z order.

3.! Select desired Episodes, which are listed in newest to oldest order. After

Episode is

selected, podcast will play and podcast name/episode will be

displayed.

4.! The following options are available during playback by pressing the Options

button:

•! Speed: Select between normal, fast or slow.

•! Delete Podcast: Select between yes or no to delete podcast from the

player.

Deleting podcast from the player will not permanently delete the

content from

your computer.

Quick Tips: to ensure files sorter correctly, file should not exceed 16

characters long or use ID3 tags. Also, to make sure your book seen

under audiable section, place your audiobook under the audiobook

folder.

Card

22!

Chapter 7

This chapter describes how to play music from a preloaded

microSDHC Card with content for expanded storage.

Card

The SanDisk Clip Jam MP3 player accepts a microSDHC card that provides extra

storage

for content, enabling the card to become a portable content holder.

Books and music can

be loaded from a computer to the microSDHC card in the

same manner they are loaded to

the player. (Please refer to Chapters 3 and 6

for content loading details.) The microSDHC

card is sold separately and is not

required for using the SanDisk Clip Jam MP3 Player.

microSDHC™ Card

1.! Insert a microSDHC card

loaded with audio content files

into the microSDHC

card slot.

2.! Select Card from the Main

Menu. The display screen will

show “Refreshing

your media” and a content menu appears.

3.! Select Artists, Albums,

Songs, or Books to navigate

to the desired content.

4.! Alternately, from the Folders

Menu, select Folders >

External Card, and

navigate

through folders to desired

content.

Note: You can access your card content from

the card menu.

Additional Information

The SanDisk Clip Jam MP3 player is capable of working with microSDHC cards

to 32GB. The player can store up to 40GB* of total device content including

internal memory (e.g., 8GB player with a 32GB card).

* 1GB=1,000,000,000 bytes. Actual user storage less.

Quick Tips: The microSDHC logo on the actual card (sold

separately) will appear upside- down when properly oriented for

inserting into the microSDHC card slot.

Quick Tips:

For higher capacity of content, the device will take longer to load.

Player Settings

23!

Chapter 8

This chapter describes how to customize the SanDisk Clip Jam MP3

player’s settings.

Settings

The SanDisk Clip Jam MP3 player has multiple settings that allow you to

customize the

device to match your own personal listening preferences.

System Settings

To select system setting options, follow these steps:

1.! Select Settings from the Main Menu.

2.! Select System Settings.

3.! Customize the player with the following options:

•! Backlight

•! Brightness

•! Power Saver

•! Sleep

•! Customize

•! Menu Looping

•! Equalizer

•! Replay Gain

•! Language

•! Date

•! Time

•! Volume

•! Info

•! Format

•! Restore

Backlight

This option selects the time that the player will trigger the backlight timer

program to

automatically turn off the backlight. You can press any button to re-

activate the

backlight.

1.! Select Backlight.

2.! Press the Previous or Forward buttons to select desired backlight timer (15

seconds to 90 seconds).

Player Settings

24!

Brightness

This option adjusts the display brightness for better viewing in different lighting

environments.

Select Brightness.

Press the Previous or Forward buttons to set the contrast level (20% to

100%).

Press the Select button to confirm choice.

Power Saver

This option turns the player off automatically when it has been idle for a defined

period of

time.

Select Power Saver.

Press the Previous or Forward buttons to select desired time (None to 120

minutes) before power off. The player will not enter the power saver mode

if it is

set to None.

Press the Select button to confirm choice.

Sleep

This option turns the player off automatically after a defined period of playback

time.

Select Sleep.

Press the Previous or Forward buttons to select desired playback time

before

power off (None to 120 minutes). The player will not enter the sleep

mode if it is

set to None.

Press the Select button to confirm choice.

Player Settings

25!

Customize

This option removes player home features from the Main Menu.

Select Customize.

Select the name of the feature you want removed.

Press the Select button to toggle between On or Off.

Press the Back button to return to previous menu.

Menu Looping

This option enables continuous menu scrolling, or looping, without stopping at

the end

and beginning of a menu.

Select Menu Looping.

Press the Select button to toggle between On or Off.

Equalizer

This option enhances the sound quality of certain music types to better match

the genre

being played.

Select Equalizer.

Press the Up or Down buttons to scroll through the music types.

Press the Select button to choose the desired option that best matches the

music

being played.

Player Settings

26!

Replay Gain

This option provides a method for keeping the perceived volume level constant

during

playback of content. Typically, music albums are mixed and targeted to

differing average

levels. During playback in shuffle mode there can be wide

differences in the track

volume, causing the user to make frequent corrections

to the volume level.

1.! Select Replay Gain.

2.! Select Mode and press the Select button to choose between Songs, Albums,

or Off.

3.! Select Pre-Gain and press the Select button to choose how many decibels

(dB)

you want to adjust the overall Playback Volume level upward to

compensate for

the “average” level of your library’s track adjustment.

Language

This option selects different languages for the player’s display screen.

1.! Select Language.

2.! Press the Up or Down buttons to scroll through languages.

3.! Press the Select button to choose desired language.

Date

This option selects the date.

1.! Select Date.

2.! Press the Previous or Forward buttons to select the day, month, or year.

3.! Select the Up button to increase numbers or Down button to decrease

numbers,

respectively.

4.! Press the Select button after final date has been set.

Quick Tips: European users be aware of the Europeans limits of volume

within the laws and regulations of the European Union.

Quick Tips: For more information, please visit:

http://kb.sandisk.com/app/answers/detail/a_id/430

Quick Tips: The date format will be set according to your initial device

regional settings. For the Americas region, date will show

month/day/year. For other regions, date will show day/month/year.

Player Settings

27!

Time

This option selects the time.

1.! Select Time.

2.! Press the Previous or Forward buttons to select the hour, minute, or second.

3.! Select Up to increase numbers or Down to decrease numbers, respectively.

4.! Press the Select button after final time has been set.

Volume

This option adjust the volume.

Select Volume.

Select Normal or High.

Press the Select button to choose the desired option.

Info

This option displays player information, such as firmware version, available/free

memory,

number of contents loaded in the player, and the battery status.

Select Info.

Press the Up or Down buttons to scroll through information.

Player Settings

28!

Format

Select Format.

Select Internal Memory, External Memory, or All.

Choose desired option by selecting Yes or No.

Press the Select button to confirm, or press the Back button to return to the

previous menu.

Restore

This option restores the player to the original factory settings it had when the

device was

first purchased.

Select Restore.

Choose desired option by selecting Yes or No.

Press the Select button to confirm, or press the Back button to return to the

previous menu.

CAUTION: This option will delete all the files stored on the

player. Ensure that you back up all the media files on the

player before formatting the device. All media files will have to

re-transferred the device after you have formatted it.

CAUTION: This option will delete all customized settings from the player.

Player Settings

29!

Music Options

To select music options, follow these steps:

1.! Select Settings from the Main Menu.

2.! Select Music Options.

3.! Customize the player with the following options:

•! Shuffle

•! Repeat

Shuffle

This option plays songs in random order.

1.! Select Shuffle.

2.! Press the Select button to toggle between Shuffle On and Shuffle Off (to play

songs in random order, set Shuffle to ON).

Repeat

This option repeats the song.

1.! Select Repeat.

2.! Press Select to toggle and choose a repeat mode:

•! Off: No repeat of tracks

•! Song: Repeat the current track

•! All: Repeat all selected tracks at the current menu location

Audiobook and Podcast Options

To select audiobook and podcast options, follow these steps:

1.! Select Settings from the Main Menu.

2.! Select Audibook Options or Podcast Options.

3.! Customize the player with the following option.

Quick Tips: While on shuffle mode, Forward and Backwards will randomly select a song.

Quick Tips: If music is currently playing, the Options Menu can be accessed by

pressing the Options button when the playback screen is open. Music options

include: Add Song To GoList, Remove Song From GoList, Repeat, Shuffle, Music EQ,

Delete Song, and Track Info. Please refer to Chapter 4 for more details.

Player Settings

30!

Speed

This option controls the pace of the content when it is being played.

1.! Select Speed.

2.! Press the Select button to toggle between Normal, Fast, and Slow playback.

Radio Options

To select radio options, follow these steps:

1.! Select Settings from the Main Menu.

2.! Select Radio Options.

3.! Customize the player with the following options:

•! Delete All Presets

•! FM Mode

Delete All Presets

This option deletes all preset radio stations.

1.! Select Delete All Presets.

2.! Choose desired option by selecting Yes or No.

3.! Press the Select button to confirm, or press the Back button to return to

menu.

FM Mode

This option selects stereo or mono radio mode.

1.! Select FM Mode.

2.! Press the Select button to toggle between Stereo or Mono.

3.! Press the Back button to return to previous menu.

Service & Warranty

31!

Chapter 9

This chapter describes how to get service and support for the

SanDisk Clip Jam MP3 player.

Learn More, Service, and Warranty

Information

Getting Technical Support

If you have questions about the use or features of your SanDisk player as well as

other

SanDisk products, please visit our Knowledgebase at kb.sandisk.com or

www.sandisk.com/support .

THIRD PARTY INTELLECTUAL PROPERTY NOTICE

This product is protected by certain intellectual property rights of Microsoft

Corporation. Use or

distribution of such technology outside of this product is

prohibited without a license from

Microsoft or an authorized Microsoft subsidiary.

Content providers are using the digital rights

management technology for Windows

Media contained in this device (“WM-DRM”) to protect

the integrity of their content

(“Secure Content”) so that their intellectual property, including

content is not misappropriated. This device uses WM-DRM software to play

Secure

Content (“WM-DRM Software”). If the security of the WM-DRM Software in this

device

has been compromised, owners of Secure Content (“Secure Content

Owners”) may request that

Microsoft revoke the WM-DRM Software’s rights to

acquire new licenses to copy display and/or

play Secure Content. Revocation does

not alter the WM-DRM Software’s ability to play

unprotected content. A list of

revoked WM-DRM Software is sent to your device whenever you

download a license for Secure Content from the Internet or from a PC. Microsoft, may, in

conjunction with such license, also download revocation lists onto your device on behalf of

Secure Content Owners.

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT

PORTFOLIO LICENSE FOR

THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN

COMPLIANCE WITH THE MPEG-4

VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO

THAT WAS

ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON

COMMERCIAL ACTIVITY

AND/OR WAS OBTAINED FROM A VIDEO PROVIDER

LICENSED BY MPEG LA TO PROVIDE

MPEG-4 VIDEO. NO LICENSE IS GRANTED

OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION

INCLUDING THAT

RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL

USES AND LICENSING MAY BE

OBTAINED FROM MPEGLA, LLC.

SEE HTTP://WWW.MPEGLA.COM.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS

and Thompson.

Service & Warranty

32!

SanDisk Manufacturer’s Limited Warranty

For Technical Support over the Internet, visit: www.sandisk.com/wug

FCC REGULATION

This device complies with part 15 of the FCC Rules. Operation is subject to

the

following two conditions:

1.! This device may not cause harmful interference, and

2.! This device must accept any interference received, including interference

that may cause undesired operation.

3.! This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate

radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

4.! However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause interference to radio or television

reception, which can be determined by turning the equipment off and then

on, the user is encouraged to try to correct the interference by one or more

the following measures:

5.! Increase the separation between the equipment and receiver.

6.! Correct the equipment to a different outlet so that the equipment and

receiver are on different branch circuits.

7.! Consult the dealer or an experienced radio / TV technician for help.

To prevent possible hearing damage, do not

listen to high volume levels for long periods.

SanDisk, Clip Jam and others are trademarks of SanDisk Corporation. The

microSD mark is a trademark of SD-3C, LLC. Other brand names mentioned

herein are for identification purposes only and may be the trademarks of their

respective holder(s).

Documenttranscriptie

SanDisk® Clip Jam™ User Manual May 2015 CHAPTER 1 Safety Tips and Cleaning Instructions Disposal Instructions CHAPTER 2 SanDisk Clip Jam MP3 Player Overview Features Minimum System Requirements Package Contents Clip Jam MP3 Player at a Glance Main Menu Options: Product Capacities Battery Charging Firmware Updater Earbuds CHAPTER 3 Basic Operation Power/ Select Button Power On Power Off Reset Connecting Player to a Windows or Mac Computer Disconnecting the Player from a Windows Computer Disconnecting the Player from a Mac Computer Chapter 4 Music Loading Music Drag and Drop (Windows) Drag and Drop (Mac) Playing Music Options Menu Creating Playlists CHAPTER 5 Radio Listening to FM Radio Programming FM Presets 1 1 1 2 2 2 2 2 3 5 6 6 6 7 7 8 8 8 8 8 8 8 9 9 10 10 10 10 11 11 12 14 18 18 18 18 Chapter 6 Books Loading Audiobooks and Podcasts Drag and Drop (Windows) Drag and Drop (Mac) Playing Audiobooks and Podcasts Chapter 7 Card microSDHC™ Card Chapter 8 Settings System Settings Music Options Audiobook and Podcast Options Radio Options Chapter 9 Learn More, Service, and Warranty Information THIRD PARTY INTELLECTUAL PROPERTY NOTICE SanDisk Manufacturer’sLimited Warranty FCC REGULATION 19 19 19 19 20 20 22 22 22 23 23 23 29 29 30 31 31 31 32 32 CHAPTER 1 This chapter describes the safety tips and cleaning instructions for the SanDisk Clip Jam MP3 player. Safety Tips and Cleaning Instructions 1. 2. 3. 4. Read the safety instructions carefully before using the player. Review this entire manual to ensure proper usage. Keep this User Manual for future reference. Do not use headphones/earphones while driving, cycling, or operating any motorized vehicle. This may create a traffic hazard and may be illegal in some areas. It can also be dangerous to play your music with headphones/earphones at high volume while walking, or engaged in other activities. You should exercise extreme caution and discontinue use in potentially hazardous situations. 5. Avoid using headphones/earphones at high volume. Hearing experts advise against continuous loud and extended music play. Keep the volume at a moderate level, so that you are better able to hear outside sound and are considerate of the people around you. 6. Keep the player away from sinks, drinks, bathtubs, showers, rain, and other sources of moisture. Moisture can cause electric shocks with any electronic device. 7. Follow these tips to keep the player working well for a long time: • Clean the player with a soft lint-free cloth. • Do not allow children to use the player unsupervised. • Never force any connector into the ports of the player or your computer. Make sure your connectors are the identical shape and size before you connect. • Do not disassemble, crush, short-circuit, or incinerate the internal rechargeable battery as it may cause fire, injury, burns, or other hazards. Disposal Instructions Do not dispose of this device with unsorted waste. Improper disposal may be harmful to the environment and human health. Please refer to your local waste authority for information on return and collection systems in your area for proper disposal of electronic products, components, and accessories. Safety Tips, Cleaning & Instructions 1 CHAPTER 2 This chapter describes the features and functionality of the SanDisk Clip Jam MP3 player. SanDisk Clip Jam MP3 Player Overview Congratulations on your purchase of a SanDisk Clip Jam™ MP3 player! Put the fun back into music-on-the-go with the compact and colorful Clip Jam digital music player you can clip on and take anywhere. The bright one inch screen and big navigation buttons make it easy to drag, drop and play files in popular audio formats including AAC. Add even more music via the microSD™ card slot1 for up to 18 hours2 of big sound. Features • • • • • • • Super lightweight wearable personal music player Deep, rich sound quality 8GB internal capacity with a built-in microSD™ card expansion slot1 Big, bright readable screen and large navigation buttons Up to 18 hour battery life2 Available in neon bright red, purple, blue, green and glossy black Play audio files in lots of formats (MP3, WMA (no DRM), AAC (DRM free iTunes), and Audible (DRM only) Minimum System Requirements • Windows® XP SP2 or Mac OS X 10.3 and Linux • USB 2.0 port (for hi-speed transfers and charging) Package Contents The Clip Jam MP3 Player is shipped with the following components: • SanDisk Clip Jam MP3 player • Earbuds • USB 2.0 Cable • Quick Start Guide SanDisk Clip Jam MP3 Player Overview 2 Clip Jam MP3 Player at a Glance SanDisk Clip Jam MP3 Player Overview 3 Playback Screen 1 Play/Pause Displays the music or recording playback status. 2 Battery Indicator Displays the battery status. 4 Artist name/ song name Displays the artist name and the song name 5 Song progress Displays the progress of the current track 6 Song no./ all songs Displays the current track song No./ total No. of song in current location SanDisk Clip Jam MP3 Player Overview 4 Main Menu Options: Music – Browse and listen to artists, albums and playlists. Radio – Listen to FM broadcast radio and save presets. Books – Browse and listen to audiobooks DRM. Card – Optional microSD™ or microSDHC cards allow extra storage and content. Card sold separately. Settings – View or customize the SanDisk player features. Folders – Browse and listen to content saved in individual folders. SanDisk Clip Jam MP3 Player Overview 5 Product Capacities 8GB* Carry up to 2,000 songs3 Notes: *1GB=1,000,000,000 bytes. Actual user storage less. 1 Card not included; sold separately. 2 Based on continuous playback at 128 kbps MP3. Actual life and performance may vary upon usage and settings; battery is not replaceable. 3 Based on 3.5 min. songs. Approximations: results may vary based on file attributes, and other factors. Battery The player comes with an internal rechargeable battery that can last up to 18 hours* during typical use. To use the player for the very first time, you should fully charge the battery. You can charge your SanDisk player through the USB port of your computer, a car adapter (not included), or AC adapter (not included). *Based on continuous playback at 128 Kbps MP3. Actual life and performance may vary depending upon usage and settings. Battery not replaceable. Charging Before using the player, fully charge the device. To charge the battery, follow these steps: 1. Connect player to computer (computer must be on). 2. A “Charging” icon will appear on the device while it is charging (shown below). Full charge takes up to three hours. When fully charged, battery indicator will be solid green and “Charged” message will appear. 3. To stop charging, unplug device. Quick Tips: The battery CANNOT be overcharged. • If your computer does not recognize the player, verify that you are using Windows® XP SP2 or Mac OS X 10.3 and Linux (mass storage class only), restart the player, and try again. • NOTE: When battery level reaches 20% device will notify: "Battery running low", at 5%- battery will turn off SanDisk Clip Jam MP3 Player Overview 6 Firmware Updater SanDisk occasionally releases firmware updates, which may include new features and performance enhancements. SanDisk highly recommends updating the MP3 player to the latest firmware. It is highly recommended to update the firmware after the first battery charge. For the latest firmware, access http://www.sandisk.com/clipjam and follow these steps: 1. Click on the banner, “Download Firmware Updater.” 2. Click on the downloader file and press “run.” 3. Follow the step-by-step instructions to upgrade the firmware. 4. Restart the player after firmware update is complete. Quick Tips: After the first download, the Updater will automatically notify you of any new firmware updates. User manual is also available via the Updater. Earbuds The player comes with adjustable earbuds that can be customized to fit various ear sizes. To properly fit earbuds, try different cups until you find the size that fits most snugly in your ear. Then slide cord fastener upward under chin to tighten. 1. To remove the earbud cup, hold the earbud and gently pull the cup away from the earbud stem. (Do not hold or pull on the earbud base or cord.) 2. To replace the earbud cup, gently push the cup onto the earbud stem until it fits firmly into place. SanDisk Clip Jam MP3 Player Overview 7 CHAPTER 3 This chapter describes basic user operation instructions for the SanDisk Clip Jam MP3 player. Basic Operation Power/ Select Button The Power button is located in the center of the player. It can be used to turn the player on or off, and also to select player options. Power On Press and hold the Power button for three seconds to turn on the player. The last played function screen from the Main Menu will appear after the device has been powered on. Power Off Press and hold the Power button for three seconds to turn off the player. Reset If the player freezes for any reason, power off the player and then restart it again. After you perform the reset, any adjustments made during the last operation will be lost. Your saved content (e.g. Music Files, Audiobooks, etc.) will not be deleted from the player. Connecting Player to a Windows or Mac Computer 1. To connect the player to a Windows computer, follow these steps: 2. Connect the large end of the USB cable into an available USB port on the computer. 3. Connect the smaller end of the USB cable into the player’s dock connector. 4. The display screen will show “Charging” (shown below). 5. The player will appear in My Computer as “CLIP JAM.” Basic Operation 8 Disconnecting the Player from a Windows Computer Simply disconnect the USB cable from the player after you have finished charging, transferring, or upgrading firmware. CAUTION: Do not disconnect the player while it is transferring data. Disconnecting the player from the computer during data transfer may damage the device. Disconnecting the Player from a Mac Computer Eject the removable disk by dragging the icon to the Trash and then disconnect the USB cable from the computer after you have finished charging, transferring, or upgrading firmware. CAUTION: Do not disconnect the player while it is transferring data. Disconnecting the player from the computer during data transfer may damage the device. Basic Operation 9 Chapter 4 This chapter describes how to load music files from your computer to the SanDisk Clip Jam MP3 player and play music on the device. Music The SanDisk Clip Jam MP3 player is able to store hundreds of songs in various formats and provides multiple listening options that can be customized to suit your individual needs. Loading Music You can transfer music from your computer to the player using the drag-anddrop method. Drag and Drop (Windows) To drag-and-drop music to the player from a Windows computer, follow these steps: 1. Connect the player to your computer using the USB cable. 2. Select Open device to view files using Windows Explorer on initial connection or by going to My Computer. 3. Double-click on the CLIP JAM icon. 4. Double-click on the Music folder. 5. Drag and drop music files from your computer to the player’s Music folder. 6. If an optional microSD™ card is inserted inside the player, you can also drag and drop files to the card by double-clicking on the second removable disk that appears when you connect the player (My Computer > Removable Device). The second removable disk is displayed with the card’s name, just as if you connected it via a card reader. 7. You can only drag and drop files to the card if you have write permissions for the card. (Please refer to Chapter 7 for more details.) 8. Visit the following link for step-by-step instructions: http://kb.sandisk.com/app/answers/detail/a_id/946/ Note: Device will notify “refresh your media” for few seconds. Music 10 Drag and Drop (Mac) To drag-and-drop music to the player from a Mac computer, follow these steps: 1. Connect the player to your computer using the USB cable. 2. Double-click on the removable disk icon named “CLIP JAM” that appears on your desktop. 3. Double-click on the Music folder. 4. Drag and drop music files from your computer to the player’s Music folder. 5. Visit the following link for step-by-step instructions: http://kb.sandisk.com/app/answers/detail/a_id/1141/ If an optional microSD card is inserted inside the player, you can also drag and drop files to the card by double-clicking on the second removable disk that appears when you connect the player (My Computer > Removable Device). The second removable disk is displayed with the card’s name, just as if you connected it via a card reader. You can only drag and drop files to the card if you have write permissions for the card. (Please refer to Chapter 7 for more details.) Quick Tips: Remember to eject the removable disk using the Windows or Mac eject before disconnecting the player. Playing Music To play music, follow these steps: 1. Select Music from the Main Menu. 2. Select from the music content groupings: Shuffle, Artists, Albums, Songs, and Playlists. • Shuffle plays all content saved on the device in random order. • Artists shuffles artists or selects the artist’s name to show their songs. • Albums shuffles songs from all albums or enables scrolling to find desired Albums. Once selected, the album songs will be listed. • Songs provides a list to select a song title, which are shown in alphabetical order. • Playlists lists all song titles of content for playlist or GoList groups that have been created. Quick Tips: Under artists, songs, playlists, and albums pressing “Shuffle” will shuffle all songs in music library, not just the songs under specific selected category of artists, songs, playlists, or albums. In order to shuffle a single album, select one specific album title and press select, then select Shuffle. Music 11 1. Highlight and select the desired track or file to play from the music content groupings. 2. Press the Forward button to skip to the next song or press-and-hold to fast forward. 3. Press the Previous button once to go back to the beginning of the current song or press Previous button twice to go back to the previous song. Pressand-hold the Previous button to rewind. 4. If the display screen does not show current song, then press the Back button to return to main menu. 5. The following options are available during music playback by pressing the 6. Options button to access the Options menu. • Add Song to GoList • Repeat • Shuffle • Music EQ • Delete Song • Track Info Options Menu When listening to music, the player offers seven options for personalizing your listening experience (Add Song to GoList, Repeat, Shuffle, Music EQ, Delete Song, Track Info). To select music options, follow these steps: 1. Press the Options button while playing a song. The Options Menu will be displayed. 2. Customize the player with the following options. Add Song to GoList The GoList is an on-the-go optional playlist that enables you to quickly and easily add and remove songs to one of three available GoLists. Each GoList holds up to 100 songs. 1. Select Add Song to GoList, then select desired GoList. 2. Press the Back button to return to the playback screen. Quick Tips: Clearing the music GoList does not delete songs from the device. It merely clears the content from the playlist that was saved locally to the device. Music 12 Repeat This option repeats the song. 1. Select Repeat. 2. Press Select to toggle and choose a repeat mode: • Off: No repeat of tracks • Song: Repeat the current track • All: Repeat all selected tracks at the current menu location 3. Press the Back button to return to the playback screen. Shuffle This option plays songs in random order. 1. Select Shuffle. 2. Press the Select button to toggle between Shuffle On and Shuffle Off (to play songs in random order, set Shuffle to ON). 3. Press the Back button to return to the playback screen. Music EQ This option enhances the sound quality of certain music types to better match the genre being played. 1. Select Music EQ. 2. Press the Up or Down button to scroll through the music types and select a desired option that best matches the music being played. Delete Song This option deletes a song from the player. 1. Select Delete Song. 2. Select Yes to confirm. Track Info This option displays information about the music being played. 1. Select Track Info. 2. Press the Up or Down button to scroll through the track information. 3. Press the Back button to return to the playback screen. Music 13 Creating Playlists How do I create a playlist on the Clip Jam? The Clip Jam only supports M3U playlists and they must be stored in the same directory as the files in the playlist. The process below gives instructions for creating an M3U playlist using Windows Media Player for the use on the Clip Jam. Step 1 - Move all the files you want in the play list into a folder on the computer Music 14 Step 2 - Drag the folder into Windows Media Player Music 15 Step 3 - Click the drop down menu and select "Save list as" Step 4 - Brows to the same directory where the files you want in the playlist are saved, choose M3U playlist as the file type, name the playlist and click save Music 16 You should now see the M3U playlist saved along side the songs you want in the play list Step 5 - Drag the entire folder containing the songs and the M3U playlist to the Music folder of the Clip Jam The Playlist will now be available under the Playlist option in the Music menu. Music 17 CHAPTER 5 This chapter describes how to listen to FM broadcast radio and program the preset stations on the SanDisk Clip Jam MP3 player. Radio The SanDisk Clip Jam MP3 player includes an integrated FM radio for listening to live broadcast FM stations. Listening to FM Radio To listen to live broadcast FM stations, follow these steps: 1. Select Radio from the Main Menu. A radio frequency menu will appear. 2. Press the Previous button or Forward button to adjust and search for the desired station, or select preset by pressing the Select button. 3. For fast search, press and hold the Previous button or the Forward button. Quick Tips: Your headphones are the antenna for your device. For best reception or maximizing the number of presets your device can find, extend the headphone cord as much as possible to increase the antenna length and therefore, reception. Pressing play/pause during a radio broadcast is the equivalent of muting the radio. There is no dynamic, live pausing capability on the SanDisk Clip Jam MP3 player. Programming FM Presets You can program up 40 preset stations. To program the preset stations on the player, follow these steps: 1. Press the Options button during Radio playback. 2. Select Add Preset to save current frequency into presets, which can be found under View all Presets. Or while the earphones are connected, select Auto Presets to allow the player to automatically search and store the strongest broadcast signals. 3. Select View All Presets to view all stored added presets. Radio 18 Chapter 6 This chapter describes how to load and play audiobooks and podcasts on the SanDisk Clip Jam MP3 player. Books The SanDisk Clip Jam MP3 player is able to store multiple audiobooks and podcasts. An audiobook is a recorded book in .mp3 format and a podcast is a recorded broadcast in .mp3 format. Note that the SanDisk Clip Jam Player is only compatible with Audible books. Loading Audiobooks and Podcasts You can transfer audio files from your computer to the player using the dragand-drop method. Drag and Drop (Windows) To drag-and-drop audio files to the player from a Windows computer, follow these steps: 1. Connect the player to your computer using the USB cable. 2. Select Open device to view files using Windows Explorer on initial connection or by going to My Computer. 3. Double-click on the CLIP JAMS icon. 4. Double-click on the Audible folder. 5. Drag and drop Audible files from your computer to the player’s Audible folder. If an optional microSD™ card is inserted inside the player, you can also drag and drop files to the card by double-clicking on the second removable disk that appears when you connect the player (My Computer > Removable Device). The second removable disk is displayed with the card’s name, just as if you connected it via a card reader. You can only drag and drop files to the card if you have write permissions for the card. (Please refer to Chapter 7 for more details.) Quick Tips: Remember to eject the removable disk before disconnecting the player. Books 19 Drag and Drop (Mac) To drag-and-drop audio files to the player from a Mac computer, follow these steps: 1. Connect the player to your computer using the USB cable. 2. Double-click on the CLIP JAM icon that appears on your desktop. 3. Double-click on the Audible folder. 4. Drag and drop audio files from your computer to the player’s Audible folder. 5. Visit the following link for step-by-step instructions: http://kb.sandisk.com/app/answers/detail/a_id/1141/kw/1141 If an optional microSD™ card is inserted inside the player, you can also drag and drop files to the card by double-clicking on the second removable disk that appears when you connect the player (My Computer > Removable Device). The second removable disk is displayed with the card’s name, just as if you connected it via a card reader. You can only drag and drop files to the card if you have write permissions for the card. (Please refer to Chapter 7 for more details.) Quick Tips: Remember to eject the removable disk before disconnecting the player. Playing Audiobooks and Podcasts Audiobooks 1. 2. 3. 4. 5. To play audiobooks, follow these steps: Select Books from the Main Menu. Select Audiobooks, then select Audible. Audiobooks are listed in A-Z order. Select desired audiobook. Select desired Chapters. After Chapter is selected, audiobook will play and audiobook name/chapter will be displayed. 6. The following options are available during playback by pressing the Options button: • Speed: Select between normal, fast or slow. • Chapter Skip: Select between off or on whether you want the book to keep its place when you skip between chapters. • Delete Audiobook: Select between yes or no to delete audiobook from the player. Deleting audiobook from player will not permanently delete the content from your computer. Books 20 Quick Tips: if you stop playing an audibook before it finishes, your player will create a .pos file, it is to save the resume point and it is not a playable file. This file will be seen only under folder view. Quick Tips: to ensure files sorter correctly, file should not exceed 16 characters long or use ID3 tags. Also, to make sure your book seen under audiable section, place your audiobook under the audiobook folder. Podcasts To play podcasts, follow these steps: 1. Select Books from the Main Menu. 2. Select Podcasts. Podcasts are listed in A-Z order. 3. Select desired Episodes, which are listed in newest to oldest order. After Episode is selected, podcast will play and podcast name/episode will be displayed. 4. The following options are available during playback by pressing the Options button: • Speed: Select between normal, fast or slow. • Delete Podcast: Select between yes or no to delete podcast from the player. Deleting podcast from the player will not permanently delete the content from your computer. Books 21 Chapter 7 This chapter describes how to play music from a preloaded microSDHC Card with content for expanded storage. Card The SanDisk Clip Jam MP3 player accepts a microSDHC card that provides extra storage for content, enabling the card to become a portable content holder. Books and music can be loaded from a computer to the microSDHC card in the same manner they are loaded to the player. (Please refer to Chapters 3 and 6 for content loading details.) The microSDHC card is sold separately and is not required for using the SanDisk Clip Jam MP3 Player. Quick Tips: The microSDHC logo on the actual card (sold separately) will appear upside- down when properly oriented for inserting into the microSDHC card slot. microSDHC™ Card 1. Insert a microSDHC card loaded with audio content files into the microSDHC card slot. 2. Select Card from the Main Menu. The display screen will show “Refreshing your media” and a content menu appears. 3. Select Artists, Albums, Songs, or Books to navigate to the desired content. 4. Alternately, from the Folders Menu, select Folders > External Card, and navigate through folders to desired content. Note: You can access your card content from the card menu. Additional Information The SanDisk Clip Jam MP3 player is capable of working with microSDHC cards up to 32GB. The player can store up to 40GB* of total device content including internal memory (e.g., 8GB player with a 32GB card). Quick Tips: For higher capacity of content, the device will take longer to load. * 1GB=1,000,000,000 bytes. Actual user storage less. Card 22 Chapter 8 This chapter describes how to customize the SanDisk Clip Jam MP3 player’s settings. Settings The SanDisk Clip Jam MP3 player has multiple settings that allow you to customize the device to match your own personal listening preferences. System Settings To select system setting options, follow these steps: 1. Select Settings from the Main Menu. 2. Select System Settings. 3. Customize the player with the following options: • Backlight • Brightness • Power Saver • Sleep • Customize • Menu Looping • Equalizer • Replay Gain • Language • Date • Time • Volume • Info • Format • Restore Backlight This option selects the time that the player will trigger the backlight timer program to automatically turn off the backlight. You can press any button to reactivate the backlight. 1. Select Backlight. 2. Press the Previous or Forward buttons to select desired backlight timer (15 seconds to 90 seconds). Player Settings 23 Brightness This option adjusts the display brightness for better viewing in different lighting environments. 1. 2. Select Brightness. Press the Previous or Forward buttons to set the contrast level (20% to 100%). 3. Press the Select button to confirm choice. Power Saver This option turns the player off automatically when it has been idle for a defined period of time. 1. 2. Select Power Saver. Press the Previous or Forward buttons to select desired time (None to 120 minutes) before power off. The player will not enter the power saver mode if it is set to None. 3. Press the Select button to confirm choice. Sleep This option turns the player off automatically after a defined period of playback time. 1. 2. Select Sleep. Press the Previous or Forward buttons to select desired playback time before power off (None to 120 minutes). The player will not enter the sleep mode if it is set to None. 3. Press the Select button to confirm choice. Player Settings 24 Customize This option removes player home features from the Main Menu. 1. 2. 3. 4. Select Customize. Select the name of the feature you want removed. Press the Select button to toggle between On or Off. Press the Back button to return to previous menu. Menu Looping This option enables continuous menu scrolling, or looping, without stopping at the end and beginning of a menu. 1. 2. Select Menu Looping. Press the Select button to toggle between On or Off. Equalizer This option enhances the sound quality of certain music types to better match the genre being played. 1. 2. 3. Select Equalizer. Press the Up or Down buttons to scroll through the music types. Press the Select button to choose the desired option that best matches the music being played. Player Settings 25 Replay Gain This option provides a method for keeping the perceived volume level constant during playback of content. Typically, music albums are mixed and targeted to differing average levels. During playback in shuffle mode there can be wide differences in the track volume, causing the user to make frequent corrections to the volume level. Quick Tips: European users be aware of the Europeans limits of volume within the laws and regulations of the European Union. 1. Select Replay Gain. 2. Select Mode and press the Select button to choose between Songs, Albums, or Off. 3. Select Pre-Gain and press the Select button to choose how many decibels (dB) you want to adjust the overall Playback Volume level upward to compensate for the “average” level of your library’s track adjustment. Quick Tips: For more information, please visit: http://kb.sandisk.com/app/answers/detail/a_id/430 Language This option selects different languages for the player’s display screen. 1. Select Language. 2. Press the Up or Down buttons to scroll through languages. 3. Press the Select button to choose desired language. Date This option selects the date. 1. Select Date. 2. Press the Previous or Forward buttons to select the day, month, or year. 3. Select the Up button to increase numbers or Down button to decrease numbers, respectively. 4. Press the Select button after final date has been set. Quick Tips: The date format will be set according to your initial device regional settings. For the Americas region, date will show month/day/year. For other regions, date will show day/month/year. Player Settings 26 Time This option selects the time. 1. Select Time. 2. Press the Previous or Forward buttons to select the hour, minute, or second. 3. Select Up to increase numbers or Down to decrease numbers, respectively. 4. Press the Select button after final time has been set. Volume This option adjust the volume. 1. Select Volume. 2. Select Normal or High. 3. Press the Select button to choose the desired option. Info This option displays player information, such as firmware version, available/free memory, number of contents loaded in the player, and the battery status. 1. Select Info. 2. Press the Up or Down buttons to scroll through information. Player Settings 27 Format CAUTION: This option will delete all the files stored on the player. Ensure that you back up all the media files on the player before formatting the device. All media files will have to re-transferred the device after you have formatted it. 1. Select Format. 2. Select Internal Memory, External Memory, or All. 3. Choose desired option by selecting Yes or No. 4. Press the Select button to confirm, or press the Back button to return to the previous menu. Restore This option restores the player to the original factory settings it had when the device was first purchased. CAUTION: This option will delete all customized settings from the player. 1. Select Restore. 2. Choose desired option by selecting Yes or No. 3. Press the Select button to confirm, or press the Back button to return to the previous menu. Player Settings 28 Music Options To select music options, follow these steps: 1. Select Settings from the Main Menu. 2. Select Music Options. 3. Customize the player with the following options: • Shuffle • Repeat Shuffle This option plays songs in random order. 1. Select Shuffle. 2. Press the Select button to toggle between Shuffle On and Shuffle Off (to play songs in random order, set Shuffle to ON). Quick Tips: While on shuffle mode, Forward and Backwards will randomly select a song. Repeat This option repeats the song. 1. Select Repeat. 2. Press Select to toggle and choose a repeat mode: • Off: No repeat of tracks • Song: Repeat the current track • All: Repeat all selected tracks at the current menu location Quick Tips: If music is currently playing, the Options Menu can be accessed by pressing the Options button when the playback screen is open. Music options include: Add Song To GoList, Remove Song From GoList, Repeat, Shuffle, Music EQ, Delete Song, and Track Info. Please refer to Chapter 4 for more details. Audiobook and Podcast Options To select audiobook and podcast options, follow these steps: 1. Select Settings from the Main Menu. 2. Select Audibook Options or Podcast Options. 3. Customize the player with the following option. Player Settings 29 Speed This option controls the pace of the content when it is being played. 1. Select Speed. 2. Press the Select button to toggle between Normal, Fast, and Slow playback. Radio Options To select radio options, follow these steps: 1. Select Settings from the Main Menu. 2. Select Radio Options. 3. Customize the player with the following options: • Delete All Presets • FM Mode Delete All Presets This option deletes all preset radio stations. 1. Select Delete All Presets. 2. Choose desired option by selecting Yes or No. 3. Press the Select button to confirm, or press the Back button to return to previous menu. FM Mode This option selects stereo or mono radio mode. 1. Select FM Mode. 2. Press the Select button to toggle between Stereo or Mono. 3. Press the Back button to return to previous menu. Player Settings 30 Chapter 9 This chapter describes how to get service and support for the SanDisk Clip Jam MP3 player. Learn More, Service, and Warranty Information Getting Technical Support If you have questions about the use or features of your SanDisk player as well as other SanDisk products, please visit our Knowledgebase at kb.sandisk.com or www.sandisk.com/support . THIRD PARTY INTELLECTUAL PROPERTY NOTICE This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. Content providers are using the digital rights management technology for Windows Media contained in this device (“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, in such content is not misappropriated. This device uses WM-DRM software to play Secure Content (“WM-DRM Software”). If the security of the WM-DRM Software in this device has been compromised, owners of Secure Content (“Secure Content Owners”) may request that Microsoft revoke the WM-DRM Software’s rights to acquire new licenses to copy display and/or play Secure Content. Revocation does not alter the WM-DRM Software’s ability to play unprotected content. A list of revoked WM-DRM Software is sent to your device whenever you download a license for Secure Content from the Internet or from a PC. Microsoft, may, in conjunction with such license, also download revocation lists onto your device on behalf of Secure Content Owners. THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEGLA, LLC. SEE HTTP://WWW.MPEGLA.COM. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thompson. Service & Warranty 31 SanDisk Manufacturer’s Limited Warranty For Technical Support over the Internet, visit: www.sandisk.com/wug FCC REGULATION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 3. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 4. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following measures: 5. Increase the separation between the equipment and receiver. 6. Correct the equipment to a different outlet so that the equipment and receiver are on different branch circuits. 7. Consult the dealer or an experienced radio / TV technician for help. To prevent possible hearing damage, do not listen to high volume levels for long periods. SanDisk, Clip Jam and others are trademarks of SanDisk Corporation. The microSD mark is a trademark of SD-3C, LLC. Other brand names mentioned herein are for identification purposes only and may be the trademarks of their respective holder(s). ©2015 SanDisk Corporation. Service & Warranty 32