Zebra LS7808 Referentie gids
- Categorie
- Streepjescodelezers
- Type
- Referentie gids
LS7808 Horizontal Slot Scanner
Quick Reference Guide
2 LS7808 Horizontal Slot Scanner
© 2015 Symbol Technologies, Inc.
Zebra reserves the right to make changes to any product to improve reliability, function,
or design.
Zebra does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any combination, system, apparatus,
machine, material, method, or process in which Zebra products might be used. An
implied license exists only for equipment, circuits, and subsystems contained in Zebra
products.
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol
logo is a registered trademark of Symbol Technologies, Inc., a Zebra Technologies
company.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty.
For Australia Only
For Australia Only. This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd.,
71 Robinson Road, #05-02/03, Singapore 068895, Singapore. Our goods come with
guarantees that cannot be excluded under the Australia Consumer Law. You are enti-
tled to a replacement or refund for a major failure and compensation for any other rea-
sonably foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not amount
to a major failure. Zebra Technologies Corporation Australia’s limited warranty above is
in addition to any rights and remedies you may have under the Australian Consumer
Law. If you have any queries, please call Zebra Technologies Corporation at
+65 6858 0722. You may also visit our website: http://www.zebra.com for the most
updated warranty terms.
Quick Reference Guide 3
Introduction
This guide is designed to assist during routine LS7808 operation. Detailed
information about unpacking, installation, performance specifications,
programming and troubleshooting can be found in the LS7808 Product
Reference Guide (p/n 72E-73952-XX).
Product Description
The LS7808 horizontal slot scanner is a high performance, omni-directional
scanner that supports high throughput applications at the point of sale (POS). The
scanner reads all retail symbologies and has multi-interface capability to interface
to all popular POS devices. The scanner is designed for horizontal in-counter
mounting and allows slide-through scanning of items enhancing productivity and
throughput. The scanner has an integrated Electronic Article Surveillance (EAS)
antenna for use with Checkpoint
®
EAS systems.
The LS7808-SR20007TCR features standard tin oxide glass, and the
LS7808-SR2X009SCR features scratch proof sapphire glass.
Configurations
The LS7808 is available in the following configurations.
Configuration Features
LS7808-SR20007TCR Standard (tin oxide) glass window; twilight
black; Checkpoint
®
EAS; RoHS compliant.
LS7808-SR20009SCR Scratch proof (sapphire) glass window;
stainless steel bezel top; Checkpoint
®
EAS;
RoHS compliant.
LS7808-SR22009SCR Scratch proof (sapphire) glass window;
stainless steel bezel top; Checkpoint
®
EAS;
RoHS compliant; Remote Scanner
Management (RSM) ready “out of the box.”
A stainless steel in-counter mounting kit (p/n 12-17206-02R) is required for all
models. See the Mounting Instructions and EAS Installation Guide for
mounting/installation instructions.
4 LS7808 Horizontal Slot Scanner
Operating the Scanner
Parts
Power
The LS7808 does not have an on/off switch. It is ready to scan when
connected to a power supply.
Indicator Lights
The scanner employs an LED with a combination of red and green lights
to indicate operation and decode status. See LED Definitions on page
10 for the different light combinations and their meanings.
If the scanner is not operating normally, contact the technical person in
charge of scanning, or call Zebra Support (see details on the back
cover).
LED Indicator
Connector Cover
(Connector Ports behind
Connector Cover)
Speaker
Bucket
Quick Reference Guide 5
Sleep Mode
The scanner automatically enters Sleep mode when it has been inactive
for a specified length of time. The scanner has two levels of sleep: laser
and motor. In laser sleep mode, after ten seconds of inactivity the laser
pulses at a 50% rate, and then drops to 3% after a specified time. In
motor sleep mode, the scanner is programmed to turn off the motor and
the laser.
To wake the scanner from sleep mode, present a bar code at the scanner
window.
Beeper Volume
The scanner emits a short beep when it successfully reads a bar code.
The volume of the beep is changed electronically by a command sent by
the host, or by scanning one of the beeper volume bar codes in the
LS7808 Product Reference Guide. See Beeper Definitions on page 8.
Connections
The scanner’s ports are at the lower edge of the scanner. Remove the
connection cover to access the ports.
EAS
Power
Port
EAS
Interlock
Port
(Behind
Label)
Secondary
Scanner
Port
RS-232
Auxiliary
Port
Connector
Cover
Host Port
6 LS7808 Horizontal Slot Scanner
Routing the Cables
The scanner case has several channels to route the outgoing cables so
that they are organized and don’t hinder the scanner’s placement. After
placing the cable connectors in the appropriate scanner ports, route the
cables through the nearest channel.
For a cable with a Y-connector (containing both power and interface
connectors):
1. Connect the power and interface cables to the appropriate ports.
2. Route the cables according to the following diagram.
Installing the Scanner
The LS7808 mounts in the counter with the face of the scanner flush with
the counter top. Refer to the LS7808 Product Reference Guide for
detailed installation instructions.
Quick Reference Guide 7
Scanning Bar Codes
Install and program the scanner. Refer to the LS7808 Product Reference
Guide for programming instructions. For assistance, contact the local
supplier or Zebra Support (see details on the back cover).
To scan a bar code:
1. Ensure all cable connections are secure.
2. Orient the item with the bar code facing the scanner window.
3. Move the item through the active scan area (see page 8) in the
direction of the scan arrow, or place the item in front of the scanner.
4. Upon successful decode, the scanner beeps and the green LED
flashes momentarily.
Product Flow
Scan Arrows
Scanner
Window
8 LS7808 Horizontal Slot Scanner
Active Scan Area
The active scan area, in front of the scanner window, is optimized to scan
items as they move in the direction of the scan arrow.
The dotted areas below represent the active scan area.
Beeper Definitions
The scanner communicates with the user by emitting different beeper
sequences and patterns. See the Beeper Indications table below for
beeper sequences that occur during both normal scanning and while
programming the scanner.
Beeper Sequence Indication
Standard Use
3 high beeps Power up.
High beep A bar code symbol was decoded (if decode beeper is
enabled).
4 long low beeps A transmission error was detected in a scanned symbol.
The data is ignored. This occurs if the scanner is not
properly configured. Check option setting.
5 low beeps Conversion or format error.
High-high-high-low
beeps
RS-232 receive error on RS-232 host or RS-232 auxiliary
port.
Scanner
Window
Quick Reference Guide 9
Code 39 Buffering
High-low beep New Code 39 data was entered into the buffer.
3 long high beeps Code 39 buffer is full.
Low-high-low beeps The Code 39 buffer was erased or there was an attempt to
clear or transmit an empty buffer.
Low-high beeps A successful transmission of buffered data.
Host Specific
USB only
4 short high beeps Scanner has not completed initialization. Wait several
seconds and scan again.
Scanner gives a
power-up beep after
scanning a USB
Device Type.
Communication with the bus must be established before
the scanner can operate at the highest power level.
This power-up beep
occurs more than
once.
The USB bus may put the scanner in a state where power
to the scanner is cycled on and off more than once. This is
normal and usually happens when the PC cold boots.
RS-232 Host only
High beep A <BEL> character is received and Beep on <BEL> is
enabled.
RS-232 Auxiliary Port only
High beep A complete block of data was received and sent to the
host, either due to a carriage return or because the
two-second serial response timeout has elapsed.
4 long low beeps A data overrun condition has occurred. Abstain from
scanning data from other ports when large amounts of
data are sent to the RS-232 Auxiliary port.
Beeper Sequence Indication
10 LS7808 Horizontal Slot Scanner
LED Definitions
In addition to beeper sequences, the scanner communicates with the
user via an LED display. The Standard LED Definitions table defines LED
indications that display during scanning.
Maintenance
Cleaning the exit window is the only maintenance required. A dirty or
scratched window may affect scanning activity.
- Remove any dirt particles with a damp cloth.
- Wipe the window with a tissue moistened with ammonia or water.
To clean the exit window:
1. Insert a coin into the large screw heads on the front of the scanner
and turn counter-clockwise.
2. Lift off the window.
3. Wipe clean the underside of the upper window.
4. Wipe clean the top surface of the lower window.
5. Re-install the top cover by tightening the two large screws.
To change the exit window:
1. Remove the window as described above.
2. Replace with a new window.
3. Reinstall the top cover by tightening the two large screws.
LED Indication
Off No power is applied to the scanner.
Green The scanner is on and ready to scan.
Momentary flash A bar code was successfully decoded.
Slow continuous red flashing, green on The scanner is in programming mode.
Fast continuous red flashing, green on There is an internal problem; the laser
is shut off for regulatory reasons.
Green on (and laser blinking) Scanner is in low power blink mode.
Red and green on Scanner is in low power (sleep) mode
and laser shutdown mode.
Quick Reference Guide 11
Troubleshooting
Problem Possible Causes Possible Solutions
The omni-line scan
pattern does not
display when you
follow the directions for
installing the host
cable.
No power to the
scanner.
Ensure the host has power,
and is on. If the scanner uses
a separate power supply,
ensure it’s connected to a
working AC outlet.
Power-up sequence is
incorrect. Refer to the LS7808
Product Reference Guide for
more information.
Interface cable is not
properly connected.
Check for loose cable
connections.
Scan line(s) display,
but bar code cannot be
read.
Scanner is not
programmed to read
the bar code type.
Ensure scanner is
programmed to read the bar
code type you are scanning.
Bar code is damaged. Try scanning other bar codes
of the same bar code type.
Bar code is too far from
scanner.
Move the bar code closer to
the scanner.
The host has disabled
scanning or overridden
parameter settings.
See the technical person in
charge of scanning.
Bar code is decoded,
but not transmitted to
the host.
Scanner is not
programmed for the
correct host type.
Scan the appropriate host
type bar code.
12 LS7808 Horizontal Slot Scanner
Scanned data is
incorrectly displayed
on the host.
Scanner is not
programmed to work
with the host. Check
scanner host type
parameters or editing
options.
Ensure proper host is
selected.
For RS-232, ensure the
scanner’s communication
parameters match the host’s
settings.
For keyboard wedge, ensure
scanner is programmed with
the correct country code and
that the CAPS LOCK key is
off.
Ensure editing options (e.g.,
UPCE-to-UPCA Conversion)
are properly programmed.
Although the green
and red LEDs are on,
the scanner does not
produce the
omni-directional scan
pattern.
The scanner has gone
into the low power
“Motor Sleep” mode.
Move a bar coded item over
the active scan area to
awaken the unit.
USB or Synapse host
not functioning
properly.
Scanner does not
recognize host.
Remove and reinsert external
power supply to force cable to
autodetect correct host.
NOTE If the symbol still does not scan, contact distributor or call Zebra
Support. See the back cover for contact information.
Problem Possible Causes Possible Solutions
Quick Reference Guide 13
Programming
Generally, the technical person in charge of scanning customizes the
scanner for the particular application using programming bar codes
found in the LS7808 Product Reference Guide, p/n 72E-73952-XX. If
the user is programming the scanner, consult the LS7808 Product
Reference Guide for more information.
Following are some frequently used programming bar codes.
Test
To confirm that your scanner is working properly, scan the UPC-A bar
code below.
Verify the Scanner Is Working
NOTE For additional host types, refer to the LS7808 Product Reference
Guide available at
http://www.zebra.com/support.
When scanning the desired bar code, cover the other bar code on
the page.
14 LS7808 Horizontal Slot Scanner
Set Defaults
Scanning this bar code sets all parameters to their factory default values.
Set Defaults
Host Type Selection
If a Synapse cable (i.e., part number STIxx-xxxx) is used, the scanner
autocoders the type of host, so there is no need to scan host type
selection bar codes.
If a USB interface is used, the scanner autocoders the USB and defaults
to the HID keyboard interface. See page 27 to select the IBM Hand-Held
host type. Refer to the LS7808 Product Reference Guide, p/n 72-69531-XX,
for additional USB host types.
If a Keyboard Wedge, RS-232, Wand Emulation or IBM 46XX host is
used, select that host type from the programming bar codes that follow. If
Keyboard Wedge is selected, also select a country keyboard type from
the following pages.
Keyboard Wedge Host Type
IBM PC/AT & IBM PC Compatibles
NOTE When scanning the desired bar code, cover other bar code on
page.
Quick Reference Guide 15
Keyboard Wedge Host Type (continued)
IBM PS/2 (Model 30)
IBM AT NOTEBOOK
NOTE When scanning the desired bar code, cover other bar code on
page.
16 LS7808 Horizontal Slot Scanner
Keyboard Wedge Host Type (continued)
NCR7 7052
Country Keyboard Types (Country Codes)
Country keyboard options apply to the Keyboard Wedge interface only.
North American
NOTE When scanning the desired bar code, cover other bar code on
page.
Quick Reference Guide 17
Country Keyboard Types (continued)
French
French Canadian Win95/98
NOTE When scanning the desired bar code, cover other bar code on
page.
18 LS7808 Horizontal Slot Scanner
Country Keyboard Types (continued)
French Canadian XP/2000
German
NOTE When scanning the desired bar code, cover other bar code on
page.
Quick Reference Guide 19
Country Keyboard Types (continued)
Spanish
Italian
NOTE When scanning the desired bar code, cover other bar code on
page.
20 LS7808 Horizontal Slot Scanner
Country Keyboard Types (continued)
Swedish
UK English
NOTE When scanning the desired bar code, cover other bar code on
page.
Quick Reference Guide 21
Country Keyboard Types (continued)
Japanese
Brazil Portuguese Windows
NOTE When scanning the desired bar code, cover other bar code on
page.
22 LS7808 Horizontal Slot Scanner
RS-232 Host Types
Standard RS-232
ICL RS-232
Quick Reference Guide 23
RS-232 Host Types (continued)
Wincor-Nixdorf RS-232 Mode A
Wincor-Nixdorf RS-232 Mode B
NOTE When scanning the desired bar code, cover other bar code on
page.
24 LS7808 Horizontal Slot Scanner
RS-232 Host Types (continued)
Fujitsu RS-232
OPOS
NOTE When scanning the desired bar code, cover other bar code on
page.
Quick Reference Guide 25
RS-232 Host Types (continued)
JPOS
USB Host Types
HID Keyboard Emulation
(Common Keyboard Wedge Interfacing)
NOTE When scanning the desired bar code, cover other bar code on
page.
NOTE When scanning the desired bar code, cover other bar code on
page.
26 LS7808 Horizontal Slot Scanner
USB Host Types (continued)
IBM Table Top USB
IBM Hand-Held USB
(For IBM SurePOS 700 Series)
NOTE When scanning the desired bar code, cover other bar code on
page.
Quick Reference Guide 27
USB Host Types (continued)
OPOS
IBM 46XX Host Types
* None Selected
NOTE When scanning the desired bar code, cover other bar code on
page.
28 LS7808 Horizontal Slot Scanner
IBM 46XX Host Types (continued)
Port 5B
Port 9B
NOTE When scanning the desired bar code, cover other bar code on
page.
Quick Reference Guide 29
IBM 46XX Host Types (continued)
Port 17
NOTE When scanning the desired bar code, cover other bar code on
page.
30 LS7808 Horizontal Slot Scanner
Regulatory Information
This guide applies to Model Number: LS7808
All Zebra devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required.
Any changes or modifications to Zebra equipment, not expressly approved by
Zebra, could void the user's authority to operate the equipment.
Local language translations are available at the following web site:
http://www.zebra.com/support.
Health & Safety Recommendations
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow
the recommendations below. Consult with your local Health & Safety Manager to
ensure that you are adhering to your company’s safety programs to prevent
employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Quick Reference Guide 31
Laser Devices
COMPLIES WITH 21CFR1040.10 AND 1040.11 EXCEPT FOR
DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED JUNE
24, 2007 AND IEC 60825-1 (Ed. 2.0), EN60825-1:2007.
The laser classification is marked on one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their
intended purpose. The following statement is required to comply with US and
international regulations:
Class 2 laser scanners use a low power, visible light diode. As with any very bright
light source, such as the sun, the user should avoid staring directly into the light
beam. Momentary exposure to a Class 2 laser is not known to be harmful.
Scanner Labeling
CAUTION Use of controls, adjustments or performance of procedures other than
those specified herein may result in hazardous laser light exposure.
32 LS7808 Horizontal Slot Scanner
Laser Labels
In accordance with IEC60825-1 and EN60825, the following
information is provided to the user:
Power Supply
Note: Use ONLY a LISTED, Type no. 50-14000 (5Vdc / 2A), or PWRS-14000
(5Vdc / 2A), Direct Plug-In Power supply, marked Class 2 or LPS (IEC60950-1,
SELV). Use of Alternative Power Supply will invalidate any approvals given to this
unit and may be dangerous.
Quick Reference Guide 33
Radio Frequency Interference Requirements-FCC
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Marking and European Economic Area (EEA)
Statement of Compliance
Zebra hereby declares that this device is in compliance with all the
applicable Directives, 2004/108/EC, 2006/95/EC and 2011/65/EU. A
Declaration of Conformity may be obtained from
http://www.zebra.com/doc.
Other Countries
Ukraine
34 LS7808 Horizontal Slot Scanner
Waste Electrical and Electronic Equipment (WEEE)
English: For EU Customers: All products at the end of their life must be returned to Zebra for
recycling. For information on how to return product, please go to: http://www.zebra.com/weee.
Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва
да се връщат на Zebra за рециклиране. За информация относно връщането на
продукти, моля отидете на адрес: http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit
spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové
stránce: http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udt-
jent. Læs oplysningerne om returnering af produkter på: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer
zum Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Pro-
dukten finden Sie unter http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της
διάρκειας ζωής τους,
πρέπει να επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες
σχετικά με την επιστροφή ενός προϊόντος, επισκεφθείτε τη διεύθυνση
http://www.zebra.com/weee στο ∆ιαδίκτυο.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise
eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun
aadressi: http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a
Zebra al final de su ciclo de vida para que sean reciclados. Si desea más información sobre
cómo devolver un producto, visite: http://www.zebra.com/weee.
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent
être retournés à Zebra pour recyclage. Pour de plus amples informations sur le retour de pro-
duits, consultez : http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita
devono essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle
modalità di restituzione, visitare il seguente sito Web: http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ
Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lū
dzu,
skatiet: http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti
utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite:
http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljut-
tatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudni-
valókért látogasson el a http://www.zebra.com/weee weboldalra.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom,
iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna
l-prodott, jekk jogħġbok żur: http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur
naar Zebra te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee
voor meer informatie over het terugzenden van producten.
Quick Reference Guide 35
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ
do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na
stronie internetowej http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à
Zebra para reciclagem. Para obter informações sobre como devolver o produto, visite:
http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, tre-
buie returnate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului, acce-
saţi: http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich
životnosti vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov náj-
dete na: http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju
Zebra za reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi
Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoit-
teessa http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till
Zebra för återvinning. Information om hur du returnerar produkten finns på
http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya
iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.zebra.com/weee.
If you have a problem using the equipment, contact your facility’s Technical or Systems
Support. If there is a problem with the equipment, they will contact Zebra Support at:
http://www.zebra.com/support.
For the latest version of this guide go to:
http://www.zebra.com/support.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The
Symbol logo is a registered trademark of Symbol Technologies, Inc., a Zebra
Technologies company.
© 2015 Symbol Technologies, Inc.
72-73950-04 Revision A - March 2015
Service Information
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Zebra LS7808 Referentie gids
- Categorie
- Streepjescodelezers
- Type
- Referentie gids
in andere talen
- English: Zebra LS7808 Reference guide