![](//vs1.manuzoid.nl/store/data-gzf/4fff845568e07d1761bb156c5a271dfa/2/000374804.htmlex.zip/bga.jpg)
710052-3-4 en ma ev ol 2014
INSTRUCTION MANUAL
ASSEMBLY, INSTALLATION USE AND MAINTENANCE.
Rev. 07/2013
The producer declines every responsibility on any print and/or transcription mistake contained in this booklet
The producer can change features and datas of this booklet with the proposal of keeping on increase the quality of its products.
Anytime and without notice, this booklet can’t be considered as contract with third parties.
2
1. Instruction warnings
The user has to hold the whole instruction and store up this document in case of
use. The manufacturer does not assume any responsibility for damages incurred due to
the failure of improper use of this manual.
All measures in this manual are expressed in mm.
2. Safety and Right Use Warning
The manufacturer products meet the latest technological evolutions
and current safety guidelines.
The trolley line CAPRICORNO, object of this booklet, is projected to
be in compliance with directives and field laws, in order to guarantee a safe
and reliable product. Any other use will be considered inapposite to the
original destination. The producer do not assume any responsibility for
damages caused by an improper use. Responsibility lies only on user.
A proper use also includes compliance with the instructions for use and installation
and any additional documentation as well as the conditions of inspection and maintenance
3. Warranty
We thank you for purchasing a product, designed and produced for a professional
environment. Due to commercial and construction requirements, the manufacturer
reserves the right to make changes in order to enhance the quality and use of product, in
compliance with European Community legislation, grants its products for 24 months. This
warranty does not include electrical parts, labour and all replacements related to an
improper use of the good.
Any manipulation carried out automatically excludes the liability of the
manufacturer. The products or parts to be replaced or repaired for unequivocal defects in
workmanship and materials used must be in a “free port” at the offices of the producer,
who after a careful inspection, will repair or replace them. The repairs are carried out
exclusively at the headquarters of the manufacturer, and none cost incurred by the
customer for repairs will be refunded by the manufacturer unless expressly agreed.
4. Settings
This item is packed and shipped assembled. The manufacturer declines every
responsibility of damage of someone or something caused by the failure to comply with the
instructions of this manual.
Do not make any structural change to the trolley.
The elements composing the trolley (plastic, polyurethane foam, bubbole wrap,
Styrofoam, cardboard and so on) must be kept away from children as potential
sources of danger and must be collected and disposed off separately in
accordance with local regulations.
The manufacturer declines every responsibility of damage of someone or something
caused by the failure to comply with the instructions of this manual.
After the unpacking of the item from its packing, proceed by removing the adhesive
plastic tape before sarting up the product. Any residual glue has to be removed carefully
(do not use abrasive cleaners).
The device is designed to run on AC to the voltage specified on the technical data
plate (located on the bottom of the tank).