Yamaha MCRN560BBR Handleiding

Categorie
Luidsprekers
Type
Handleiding
EnglishFranc¸ aisDeutschEspan˜ olРусский
NS-BP182
Speaker Package
Package Enceintes
4
3
5
2
1
2
CONNECTION
CONNEXION
ANSCHLUSS
CONEXIÓN
ПОДКЛЮЧЕНИЕ
When using a banana plug
Lorsqu’une fiche banane est utilise´ e
Bei Verwendung von Bananensteckern
Cuando utilice una clavija tipo banana
Использование банановый штекер
Banana plug
Fiche banane
Bananenstecker
Clavija tipo banana
Банановый штекер
NS-BP182 (R) NS-BP182 (L)
Receiver
Re´ cepteur
Receiver
Receptor
Ресивер
Speaker output terminal
Borne de sortie d’enceinte
Lautsprecherausgangsklemme
Terminal de salida para altavoz
Выходной терминал колонок
TG
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
TG
2 En
English
Install the speakers in a cool, dry, clean, stable and horizontal
place.
To avoid electric shock, fire, injury, damage to the speakers, and
discoloration of the cabinet, install away from windows, heat
sources, sources of excessive vibration, dust, moisture, cold, rain,
water, falling objects, noise sources (transformers, motors, etc.)
and direct sunlight.
Do not insert a hand or object into the port or pick up the speaker
by holding the port, as it may cause personal injury or damage to
the speaker.
Any time you note distortion, reduce the volume control on your
receiver to a lower setting. Never allow your receiver to be driven
into “clipping”. Otherwise the speakers may be damaged.
When using a receiver with a rated output power higher than the
nominal input power of the speakers, care should be taken never
to exceed the speakers’ maximum input.
Do not attempt to clean the speakers with chemical solvents (ex.
alcohol or thinners etc.); this might damage the finish. Use a
clean, dry cloth.
Do not attempt to modify or fix the speakers. Contact qualified
Yamaha service personnel when any service is needed. The cabi-
net should never be opened for any reasons.
Secure placement or installation is the owner’s respon-
sibility. Yamaha shall not be liable for any accident
caused by improper placement or installation of speak-
ers.
The following items are included.
Speaker cable (2 m) × 2 / Grille × 2
The speaker and the grille are packed
separately. To attach the grille, line up
the projections (magnets) on the reverse
side of the grille with their
corresponding screw heads on the
speaker.
When the grille is removed, be sure not to touch the
speaker units with your hands or to exert excessive force
with tools.
BEFORE MAKING CONNECTIONS, MAKE SURE THAT
THE RECEIVER IS SWITCHED OFF.
When this unit is connected to the receiver, refer also to the owner’s
manual supplied with the receiver.
See page 1 for the connection method.
Place the speakers on a sturdy, vibration-free surface.
Better stereo images will be obtained when the speakers are
slightly angled in towards the listening position.
Be sure to connect the left channel (L) and right channel (R)
properly.
Placing the speakers too close to a CRT-type TV may
impair the picture color or cause a buzzing noise. In this
case, move the speakers away from the TV. This is not an
issue with LCD and plasma TVs.
Type ..............................................2-way bass-reflex speaker system
Non-magnetic shielding Type
Driver.....................................................12 cm (4-3/4") cone woofer
3 cm (1-1/4") soft dome tweeter
Impedance................................................................................... 6 Ω
Frequency Response................................. 60 Hz to 40 kHz (-10 dB)
100 kHz (-30 dB)
Nominal Input Power ................................................................40 W
Maximum Input Power............................................................110 W
Sensitivity............................................................. 83 dB/2.83 V, 1 m
Crossover Frequency ................................................................5 kHz
Dimensions (W × H × D) ...............................154 × 273 × 230 mm
(6" × 10-6/8" × 9")
Weight.......................................................................3.3 kg (7.2 lbs.)
* Specifications are subject to change without notice due to
product improvements.
* Care should be taken not to exceed the input power values noted
above.
PRECAUTIONS
ACCESSORIES
ATTACHING THE GRILLE
Note
CONNECTION TO YOUR RECEIVER
PLACING THE SPEAKERS
Note
SPECIFICATIONS
(L) (R)
3 Fr
Franc¸ ais
Installez les enceintes dans un endroit frais, sec, propre, stable et
horizontal.
Afin de prévenir les chocs électriques, les incendie, les blessures,
les dommages aux enceintes et la décoloration des boîtiers, ins-
tallez-les loin des fenêtres, des sources de chaleur, des sources de
vibrations excessives, de poussière, d’humidité, de froid, d’eau,
de chute d’objets, de sources de bruits (transformateurs, moteurs,
etc.) et de la lumière directe du soleil.
N’insérez pas une main ni un objet dans le port et ne soulevez pas
l’enceinte en la tenant par le port, car cela pourrait entraîner des
blessures personnelles ou des dommages à l’enceinte.
Lorsque vous entendez de la distorsion, réduisez le niveau du
volume du récepteur. Ne laissez pas le récepteur écrêter. Sinon,
les enceintes risquent d’être endommagés.
Lorsque vous utilisez un récepteur dont la puissance de sortie
nominale est supérieure à la puissance d’entrée nominale des
enceintes, prenez garde de dépasser cette puissance.
N’essayez pas de nettoyer les enceintes avec des solvants chimi-
ques (alcool ou diluant, etc.). Cela risquerait d’endommager
l’apprêt. Utilisez un chiffon propre et sec.
N’essayez pas de modifier ou de réparer les enceintes. Pour la
réparation, contactez un centre de service après-vente Yamaha
agréé. Lenceinte ne doit en aucun cas être ouverte.
Le propriétaire des enceintes est responsable de leur
emplacement et de leur installation. Yamaha décline
toute responsabilité en cas d’accident causé par un
positionnement ou une installation inadéquate des
enceintes.
Les articles suivants sont compris.
Câble d’enceinte (2 m) × 2 / Grille × 2
L’enceinte et la grille sont emballées
séparément. Pour fixer la grille, alignez
les saillies magnétiques situées au dos de
la grille sur les têtes de vis
correspondantes de l’enceinte.
Lorsque la grille est retirée, prenez soin de ne pas
toucher les enceintes avec les mains ou de ne pas
appliquer une force excessive avec un outil.
AVANT DE RÉALISER LES RACCORDEMENTS,
ASSUREZ-VOUS QUE LE RÉCEPTEUR EST ÉTEINT.
Pour raccorder cet appareil au récepteur, reportez-vous aussi au
mode d’emploi fourni avec le récepteur.
Reportez-vous à la page 1 pour la méthode de connexion.
Placez les enceintes sur une surface solide et non sujettes à des
vibrations.
La qualité des images stéréo sera meilleure si vous tournez
légèrement les enceintes vers l’intérieur pour les diriger vers la
position d’écoute.
Prenez soin de bien raccorder le canal gauche (L) et le canal
droit (R).
Placer les enceintes trop près d’un téléviseur à tube
cathodique peut affecter la couleur de l’image ou créer
un bourdonnement. Dans ce cas éloignez l’enceinte du
téléviseur. Ceci ne représente pas un problème avec des
téléviseurs LCD ou au plasma.
Type..................................................... Enceintes bass-reflex 2 voies
Type à blindage non magnétique
Pilote..............................................Enceinte grave en cône de 12 cm
Haut-parleur d’aigus à pavillon souple de 3 cm
Impédance ....................................................................................6 Ω
Réponse en fréquence.................................60 Hz à 40 kHz (-10 dB)
100 kHz (-30 dB)
Puissance d’entrée nominale .....................................................40 W
Puissance d’entrée maximum..................................................110 W
Sensibilité............................................................. 83 dB/2,83 V, 1 m
Fréquence de transfert ..............................................................5 kHz
Dimensions (L × H × P).................................. 154 × 273 × 230 mm
Poids.........................................................................................3,3 kg
* Les spécification sont sujettes à changement sans notification
pour amélioration des performances du produit.
* Veillez à ce que les valeurs de puissance d’entrée mentionnées ci-
dessus ne soient pas dépassées.
PRÉCAUTIONS
ACCESSOIRES
FIXATION DE LA GRILLE
Remarque
RACCORDEMENT À VOTRE RÉCEPTEUR
POSITIONNEMENT DES ENCEINTES
Remarque
SPECIFICATIONS
(L) (R)
4 De
Deutsch
Stellen Sie die Lautsprecher an einem kühlen, trockenen, sauberen,
stabilen und ebenen Ort auf.
Um elektrische Schläge, Brände, Verletzungen, Schäden an den
Lautsprechern oder Verfärbung des Gehäuses zu verhindern, stel-
len Sie die Lautsprecher entfernt von Fenstern, Wärmequellen,
starken Vibrationsquellen, Staub, Feuchtigkeit, Kälte, Regen, Was-
ser, Störungsquellen (Trafos, Motoren usw.) und direktem Sonnen-
licht auf.
Führen Sie Ihre Hand oder einen Fremdkörper nie in die Öffnung
des Lautsprechers ein oder greifen Sie den Lautsprecher an der
Öffnung, da dies zu Körperverletzungen oder einer Beschädigung
des Lautsprechers führen kann.
Jedes Mal, wenn Verzerrung auftritt, reduzieren Sie den Lautstär-
kepegel am Receiver. Achten Sie darauf, dass der Receiver nie in
eine „Begrenzungsverzerrung“ getrieben wird. Anderenfalls könn-
ten die Lautsprecher beschädigt werden.
Wenn Sie einen Receiver verwenden, dessen Nennausgangslei-
stung höher ist als die Nenneingangsleistung der Lautsprecher,
sollten Sie immer darauf achten, dass die maximale Eingangslei-
stung der Lautsprecher nicht überschritten wird.
Verwenden Sie zum Reinigen der Lautsprecher keine chemischen
Lösungsmittel (z.B. Alkohol oder Verdünner usw.), da diese die
Appretur beschädigen könnten. Verwenden Sie zum Reinigen ein
sauberes, trockenes Tuch.
Versuchen Sie nicht, die Lautsprecher abzuändern oder zu reparie-
ren. Falls Reparaturarbeiten erforderlich sind, wenden Sie sich
bitte immer an das qualifizierte Kundendienstpersonal von
Yamaha. Das Gehäuse sollte unter keinen Umständen geöffnet
werden.
Der Benutzer ist für die sichere Aufstellung oder Mon-
tage der Lautsprecher verantwortlich. Yamaha haftet
unter keinen Umständen für Unfälle, die auf die
unsachgemäße Aufstellung oder Montage der Laut-
sprecher zurückzuführen sind.
Die folgenden Artikel sind im Lieferumfang enthalten.
Lautsprecherkabel (2 m) × 2 / Gitter × 2
Der Lautsprecher und das vordere Gitter
sind separat verpackt. Um das vordere
Gitter anzubringen, richten Sie die
vorstehenden Teile (Magnete) der
Rückseite des vorderen Gitters an den
entsprechenden Schraubenköpfen am
Lautsprecher aus.
Achten Sie beim abgenommenen Gitter darauf, die
Lautsprecher nicht mit der Hand zu berühren oder mit
einem Werkzeug gewaltsam zu behandeln.
VOR DEM HERSTELLEN VON ANSCHLÜSSEN STELLEN
SIE SICHER, DASS DER RECEIVER AUSGESCHALTET
IST.
Wenn dieses Gerät an den Receiver angeschlossen ist, siehe auch
mit dem Receiver mitgelieferte Bedienungsanleitung.
Siehe Seite 1 zum Anschlussverfahren.
Stellen Sie die Lautsprecher auf einer festen, erschütterungsfrei-
en Unterlage auf.
Sie erzielen ein besseres Stereoklangbild, wenn Sie die Lautspre-
cher etwas schräg in Richtung der Hörposition aufstellen.
Achten Sie auf den korrekten Anschluss des linken Kanals (L)
und des rechten Kanals (R).
Wenn Sie die Lautsprecher zu nahe an einem Bildröhren-
Fernsehgerät aufstellen, können verfälschte Bildfarben
oder Brummgeräusche erzeugt werden. Stellen Sie die
Lautsprecher in diesem Fall weiter vom Fernseher ent-
fernt auf. Bei LCD- und Plasma-Fernsehgeräten tritt die-
ses Problem nicht auf.
Typ........................................2-Weg-Bassreflex-Lautsprecheranlage
Typ ohne Magnetabschirmung
Treiber ............................................................12-cm-Konustieftöner
3 cm Soft Dome Hochtöner
Impedanz ..................................................................................... 6 Ω
Frequenzgang ..........................................60 Hz bis 40 kHz (-10 dB)
100 kHz (-30 dB)
Nenneingangsleistung................................................................40 W
Maximale Eingangsleistung ....................................................110 W
Empfindlichkeit .................................................... 83 dB/2,83 V, 1 m
Überschneidungsfrequenz .......................................................5 kHz
Abmessungen (B × H × T) ...............................154 × 273 × 230 mm
Gewicht................................................................................... 3,3 kg
* Änderungen der technischen Daten aus
Produktverbesserungsgründen ohne vorherige Ankündigung
vorbehalten.
* Achten Sie besonders darauf, die oben aufgelisteten Werte für die
Eingangsleistung nicht zu überschreiten.
VORSICHTSMASSNAHMEN
ZUBEHÖR
ANBRINGEN DES GITTERS
Hinweis
ANSCHLUSS AN IHREN RECEIVER
AUFSTELLUNG DER LAUTSPRECHER
Hinweis
TECHNISCHE DATEN
(L) (R)
5 Es
Espan˜ ol
Instale los altavoces en un lugar fresco, seco, limpio, estable, y
horizontal.
Para evitar descargas eléctricas, incendios, lesiones, No inserte la
mano ni ningún objeto daños a los altavoces, y la decoloración de
las cajas, instálelos alejados de ventanas, fuentes de calor, fuentes
de vibraciones excesivas, polvo, humedad, frío, lluvia, agua,
objetos que caigan, fuentes de ruido (transformadores, motores,
etc.) y de la luz solar directa.
No inserte la mano ni ningún objeto en el orificio ni tome el alta-
voz sujetándolo por dicho orificio, ya que podrían producirse
lesiones o daños del altavoz.
Cada vez que note distorsión, reduzca el volumen en su receptor
a un ajuste inferior. No permita nunca que su receptor produzca
“cortes acústicos” porque, de lo contrario, sus altavoces podrán
dañarse.
Cuando utilice un receptor con una potencia de salida nominal
más alta que la potencia de entrada nominal de los altavoces,
deberá tener cuidado para no sobrepasar nunca la entrada máxi-
ma de los altavoces.
No intente limpiar los altavoces con disolventes químicos (por
ejemplo, alcohol, diluyentes, etc.); porque éstos podrían dañar su
acabado. Utilice un paño limpio y seco.
No intente modificar ni arreglar los altavoces. Póngase en con-
tacto con el personal de servicio Yamaha cualificado cuando
necesite tener que hacer alguna reparación. La caja no debe
abrirse nunca por ninguna razón.
La colocación o instalación segura es responsabilidad
del propietario. Yamaha no se hará responsable por
ningún accidente causado por una mala colocación o
instalación de los altavoces.
Se incluyen los siguientes elementos.
2 cables de altavoces (2 m) / Reja × 2
El altavoz y la reja se suministran por
separado. Para fijar la reja, alinee las
proyecciones (imanes) del reverso de la
reja con las cabezas de tornillo
correspondientes del altavoz.
Cuando quite la reja, asegúrese de no tocar las unidades
de altavoces con sus manos ni aplicar una fuerza
excesiva con herramientas.
ANTES DE REALIZAR LAS CONEXIONES, CERCIÓRESE
DE QUE EL RECEPTOR ESTÉ APAGADO.
Para conectar esta unidad al receptor, consulte también el manual
del usuario suministrado con el receptor.
Con respecto al método de conexión, consulte la página 1.
Coloque los altavoces en una superficie fuerte y sin vibraciones.
Cuando los altavoces estén dirigidos hacia la posición de escucha
podrá obtenerse una imagen estéreo mejor.
Asegurarse de conectar el canal izquierdo (I) y el canal derecho
(D) correctamente.
Si se colocan los altavoces demasiado cerca a un
televisor de tipo CRT se puede dañar el color de las
imágenes o causar un zumbido. En este caso, poner los
altavoces lejos del televisor. Este problema no se
presenta con los televisores de plasma y LCD.
Tipo ...................Sistema de altavoces de reflejo de graves de 2 vías
Tipo sin blindaje magnético
Excitador ....................................Altavoz de graves cónico de 12 cm
Altavoz de agudos de cúpula blanda de 3 cm
Impedancia ...................................................................................6 Ω
Respuesta de frecuencia .............................60 Hz a 40 kHz (-10 dB)
100 kHz (-30 dB)
Potencia de entrada nominal .....................................................40 W
Potencia de entrada máxima....................................................110 W
Sensibilidad .......................................................... 83 dB/2,83 V, 1 m
Frecuencia de cruce..................................................................5 kHz
Dimensiones (An × Al × Prof) .........................154 × 273 × 230 mm
Peso ..........................................................................................3,3 kg
* Las especificaciones están sujetas a cambios sin previo aviso.
* Deberá tenerse mucho cuidado para no sobrepasar los valores de
potencia de entrada indicados más arriba.
PRECAUCIONES
ACCESORIOS
FIJACIÓN DE LA REJA
Nota
CONEXIÓN A SU RECEPTOR
COLOCACIÓN DE LOS ALTAVOCES
Nota
ESPECIFICACIONES
(I) (D)
6 Zh
中文
将扬声器安装于阴凉、干燥、清洁、稳固、水平处。
为了避免触电、火灾、受伤、损坏扬声器或外壳变色,安装
地点应远离窗户、热源、强震动源、灰尘、潮湿处、寒冷
处、雨、水、坠落物、噪声源 (变压器、电动机等)和直
射阳光。
不要将手或其他物体伸入扬声器孔或握住孔拿起扬声器,因
为这样会导致人身伤害或损坏扬声器。
如果您察觉到失真﹐请降低接收机的音量。不要将接收机调
节到极限位置。要不然﹐扬声器就会损坏。
如果使用的接收机的额定输出功率高于扬声器的名义输入功
率﹐就必须注意﹐不要使得输入超过扬声器的最大输入。
不要使用化学溶剂 (例如酒精或稀释剂等)清洗扬声器﹐
以免损坏其表面涂层。请使用清洁的干布。
不要试图改装或修理扬声器。如果需要服务﹐请 Yamaha
服务人员联系。任何时候都不要打开壳体。
安全的放置和安装是用户自己应负的责任。对于扬声器的不
妥当放置和安装所引起的事故﹐ Yamaha 不负任何责任。
包含下列物品。
扬声器电缆 (2 m) × 2 / 格栅 × 2
扬声器和格栅是分开包装的。安装
栅时,请将格栅反面的凸出部分 (磁
体)对准扬声器上对应的螺钉头。
当格栅去掉后﹐请一定不要用手触
扬声器单元或使用工具对其施力。
在进行连接之前,请确认接收机的电源已经关闭。
将本机连接到接收机时,请同时参考接收机附带的用户使用说
明书。
请对照第一页参考连接方法。
请将扬声器放置在结实且无震动的平面。
如果扬声器能够朝向听音位置稍微倾斜﹐就能得到更好的立
体声像。
请确认正确连接左声道和右声道。
扬声器过度靠近 CRT (阴极射线管)电视机时可能会影响电视
机图像的色彩或产生蜂鸣噪声。在此情况下,请把扬声器从电
视机处移开。液晶显示器和等离子电视不会出现此类问题。
类型 ........................... 双向低音反射扬声器系统
隔磁屏型
发音单元 ....................... 12 cm 锥盆超低音扬声器
3 cm 软圆顶高频扬声器
阻抗 .............................................. 6
频率响应 ........................ 60 Hz - 40 kHz(-10 dB)
100 kHz (-30 dB)
名义输入功 ..................................... 40 W
最大输入功 .................................... 110 W
敏感度 .............................. 83 dB/2.83 V,1 m
分频频率 ........................................ 5 kHz
尺寸 ( ×× ) ............... 154 × 273 × 230 mm
重量 ........................................... 3.3 kg
* 因为产品改良﹐规格可能时有变化。
* 必须注意﹐输入功率不能超过上述数值。
: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。
: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超 SJ/T 11363-2006 标准规定的限量要求
注意
附件
安装格栅
注意
连接到接收机
放置扬声
注意
规格
(左) (右)
部件名称
有毒有害物质或元素
(Pb)
(Hg)
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
外壳箱体
扬声器单元
7 Ru
Русский
Устанавливайте колонки в прохладном, сухом, чистом
помещении на устойчивой горизонтальной поверхности.
Во избежание поражения электрическим током, пожара,
получения травмы, повреждения колонок и обесцвечивания
корпуса устанавливайте колонки подальше от окон,
источников тепла, чрезмерной вибрации, пыли, влаги,
холоди источников шума (трансформаторов, двигателей и
т.п.), в местах, недоступных для дождя, воды, прямого
сол
н
ечного света, и безопасных с точки зрения возможности
падения на колонки других предметов.
Не просовывайте руки или другие предметы в отверстие, и
не поднимайте колонки за это отверстиеэто может стать
причиной травмирования или повредить колонки.
В случае искажения звучания понизьте уровень громкости на
ресивере. Не допускайтесрезаниязвука ресивером. В
п
р
отивном случае єто может стать причиной повреждения
колонок.
При использовании ресивера с номинальной выходной
мощностью, превышающей номинальную входную
мощность колонок, необходимо следить за непревышением
максимальной входной мощности колонок.
Не пытайтесь использовать различные химические составы
(например, алкоголь или разбавители и др.); для очистки
колонок. Это может привести к разрушению по
кры
вающего
слоя. Используйте чистую сухую ткань.
Не пытайтесь модифицировать или чинить колонки. При
необходимости обратитесь к квалифицированному
сотруднику сервисного центра Yamaha. Ни в коем случае не
следует открывать корпус аппарата.
Ответственность за безопасность размещения и
установку несёт владелец. Компания Yamaha не
несёт ответственность за какие-либо несчастные
случаи, вызванные ненадлежащим размещением
ил
и ус
тановкой динамиков.
В комплект поставки входят следующие детали.
Кабель колонки (2 м) × 2 / Решетка × 2
Решетка запакована отдельно от
акустической системы. Чтобы
установить решетка, совместите
выступающие части (магниты) на
заднейчасти решетка с
соответствующими головками винтов
на акустической системе.
Не касайтесь частей колонки руками и не прилагайте
дополнительных усилий при работе инструментами с
кол
о
нкой со снятой решетка.
ПЕРЕД ВЫПОЛНЕНИЕМ ПОДКЛЮЧЕНИЙ УБЕДИТЕСЬ
В ТОМ, ЧТО РЕСИВЕР ОТКЛЮЧЕН.
Если данный прибор подключен к ресиверу, ознакомьтесь с
инструкциями, содержащимися в руководстве пользователя
ресивера.
Что касается метода подключения, см. стр. 1.
Уст а н а вливайте динамики на устойчивой невибрирующей
поверхности.
Наилучшее качество стереозвучания достигается в случае
установки колонок под некоторым уг
лом к расположению
слушателя.
Проверьте, что левый канал (L) и правый канал (R)
правильно соединены.
Размещение колонок слишком близко к ЭЛТ-
телевизору может ухудшить цветность изображения
или вызвать появление мерцающих помех. В таком
случае установите колонки подальше от телевизора.
Такие проблемы не возникают с ЖКД и плазменными
телевизорами.
Тип ................ 2-полосная акустическая система с фро
нтальным
отражением звуковой волны
Экранирование немагнитными материалами
Голов ка ............низкочастотный динамик куполообразного типа
диаметром 12 см
Высокочастотный динамик с мягким куполом
диаметром 3 см
Импеданс .....................................................................................6 Ω
Частотные характеристики ...................... 60 Гц - 40 кГц (-10 дБ)
100 кГц (-30 дБ)
Номинальная входная мощность .......................................... 40 Вт
Максимальная входная мощность ..................................... 110 Вт
Чувствительность ................................................83 дБ/2,83 В, 1 м
Частота кроссоверов .............................................................. 5 кГц
Габариты (Ш × В × Г) ....................................154 × 273
× 230 мм
Вес............................................................................................3,3 кг
* В результате усовершенствования изделия технические
характеристики могут изменяться без предварительного
уведомления.
* Необходимо следить за непревышением вышеуказанных
значений входной мощности.
Меры предосторожности
АКСЕССУАРЫ
ЗАКРЕПЛЕНИЕ РЕШЕТКА
Примечание
ПОДКЛЮЧЕНИЕ К РЕСИВЕРУ
РАЗМЕЩЕНИЕ КОЛОНОК
Примечание
ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ
(L) (R)
© 2013 Yamaha Corporation Printed in Indonesia ZH10800
Information for Users on Collection and Disposal of Old Equipment
English
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be
mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your
national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human
health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or
the point of sale where you purchased the items.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
Information concernant la Collecte et le Traitement des déchets d’équipements électriques et électroniques.
Français
Le symbole sur les produits, l’emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés ne doivent
pas être mélangés avec les déchets domestiques habituels.
Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques, veuillez les
déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives 2002/96/EC.
En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauvegarde de précieuses
ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors d’un traitement inapproprié des déchets.
Pour plus d’informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques, veuillez contacter
votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les produits.
[Information sur le traitement dans d’autres pays en dehors de l’Union Européenne]
Ce symbole est seulement valables dans l’Union Européenne. Si vous souhaitez vous débarrasser de déchets d’équipements électriques et électroniques, veuillez
contacter les autorités locales ou votre fournisseur et demander la méthode de traitement appropriée.
Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte
Deutsch
Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten benutzte elektrische Geräte nicht
mit dem normalen Haushaltsabfall entsorgt werden. In Übereinstimmung mit Ihren nationalen Bestimmungen und den Richtlinien 2002/96/EC,
bringen Sie alte Geräte bitte zur fachgerechten Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen.
Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle Ressourcen zu schützen und verhindern mögliche negative
Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Müllentsorgung auftreten könnten.
Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte, kontaktieren Sie bitte Ihre örtliche Stadt- oder
Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel.
[Entsorgungsinformation für Länder außerhalb der Europäischen Union]
Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausrangieren möchten, kontaktieren Sie bitte Ihre örtlichen Behörden oder
Ihren Händler und fragen Sie nach der sachgerechten Entsorgungsmethode.
Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo
Español
Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usados
no deben ser mezclados con desechos hogareños corrientes.
Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de
acuerdo a su legislación nacional y las directivas 2002/96/EC.
Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto negativo sobre la
salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos.
Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio de gestión
de residuos o el punto de venta en el cual usted adquirió los artículos.
[Información sobre la Disposición en otros países fuera de la Unión Europea]
Este símbolo sólo es válidos en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autoridades locales y pregunte por el método correcto de disposición.

Documenttranscriptie

Speaker Package Package Enceintes ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ Español CONNECTION CONNEXION ANSCHLUSS CONEXIÓN Franç ais OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG MANUAL DE INSTRUCCIONES Deutsch NS-BP182 English TG ПОДКЛЮЧЕНИЕ NS-BP182 (L) 3 1 5 2 4 When using a banana plug Lorsqu’une fiche banane est utilisée Bei Verwendung von Bananensteckern Cuando utilice una clavija tipo banana Receiver Récepteur Receiver Receptor Ресивер Speaker output terminal Borne de sortie d’enceinte Lautsprecherausgangsklemme Terminal de salida para altavoz Выходной терминал колонок Использование банановый штекер 2 Banana plug Fiche banane Bananenstecker Clavija tipo banana Банановый штекер Русский NS-BP182 (R) English PRECAUTIONS CONNECTION TO YOUR RECEIVER • Install the speakers in a cool, dry, clean, stable and horizontal place. • To avoid electric shock, fire, injury, damage to the speakers, and discoloration of the cabinet, install away from windows, heat sources, sources of excessive vibration, dust, moisture, cold, rain, water, falling objects, noise sources (transformers, motors, etc.) and direct sunlight. • Do not insert a hand or object into the port or pick up the speaker by holding the port, as it may cause personal injury or damage to the speaker. • Any time you note distortion, reduce the volume control on your receiver to a lower setting. Never allow your receiver to be driven into “clipping”. Otherwise the speakers may be damaged. • When using a receiver with a rated output power higher than the nominal input power of the speakers, care should be taken never to exceed the speakers’ maximum input. • Do not attempt to clean the speakers with chemical solvents (ex. alcohol or thinners etc.); this might damage the finish. Use a clean, dry cloth. • Do not attempt to modify or fix the speakers. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons. • Secure placement or installation is the owner’s responsibility. Yamaha shall not be liable for any accident caused by improper placement or installation of speakers. BEFORE MAKING CONNECTIONS, MAKE SURE THAT THE RECEIVER IS SWITCHED OFF. When this unit is connected to the receiver, refer also to the owner’s manual supplied with the receiver. See page 1 for the connection method. ACCESSORIES The following items are included. Speaker cable (2 m) × 2 / Grille × 2 ATTACHING THE GRILLE The speaker and the grille are packed separately. To attach the grille, line up the projections (magnets) on the reverse side of the grille with their corresponding screw heads on the speaker. Note When the grille is removed, be sure not to touch the speaker units with your hands or to exert excessive force with tools. 2 En PLACING THE SPEAKERS (L) (R) • Place the speakers on a sturdy, vibration-free surface. • Better stereo images will be obtained when the speakers are slightly angled in towards the listening position. • Be sure to connect the left channel (L) and right channel (R) properly. Note Placing the speakers too close to a CRT-type TV may impair the picture color or cause a buzzing noise. In this case, move the speakers away from the TV. This is not an issue with LCD and plasma TVs. SPECIFICATIONS Type ..............................................2-way bass-reflex speaker system Non-magnetic shielding Type Driver..................................................... 12 cm (4-3/4") cone woofer 3 cm (1-1/4") soft dome tweeter Impedance................................................................................... 6 Ω Frequency Response ................................. 60 Hz to 40 kHz (-10 dB) 100 kHz (-30 dB) Nominal Input Power ................................................................40 W Maximum Input Power............................................................110 W Sensitivity ............................................................. 83 dB/2.83 V, 1 m Crossover Frequency ................................................................5 kHz Dimensions (W × H × D) ...............................154 × 273 × 230 mm (6" × 10-6/8" × 9") Weight....................................................................... 3.3 kg (7.2 lbs.) * Specifications are subject to change without notice due to product improvements. * Care should be taken not to exceed the input power values noted above. • Installez les enceintes dans un endroit frais, sec, propre, stable et horizontal. • Afin de prévenir les chocs électriques, les incendie, les blessures, les dommages aux enceintes et la décoloration des boîtiers, installez-les loin des fenêtres, des sources de chaleur, des sources de vibrations excessives, de poussière, d’humidité, de froid, d’eau, de chute d’objets, de sources de bruits (transformateurs, moteurs, etc.) et de la lumière directe du soleil. • N’insérez pas une main ni un objet dans le port et ne soulevez pas l’enceinte en la tenant par le port, car cela pourrait entraîner des blessures personnelles ou des dommages à l’enceinte. • Lorsque vous entendez de la distorsion, réduisez le niveau du volume du récepteur. Ne laissez pas le récepteur écrêter. Sinon, les enceintes risquent d’être endommagés. • Lorsque vous utilisez un récepteur dont la puissance de sortie nominale est supérieure à la puissance d’entrée nominale des enceintes, prenez garde de dépasser cette puissance. • N’essayez pas de nettoyer les enceintes avec des solvants chimiques (alcool ou diluant, etc.). Cela risquerait d’endommager l’apprêt. Utilisez un chiffon propre et sec. • N’essayez pas de modifier ou de réparer les enceintes. Pour la réparation, contactez un centre de service après-vente Yamaha agréé. L’enceinte ne doit en aucun cas être ouverte. • Le propriétaire des enceintes est responsable de leur emplacement et de leur installation. Yamaha décline toute responsabilité en cas d’accident causé par un positionnement ou une installation inadéquate des enceintes. ACCESSOIRES Les articles suivants sont compris. Câble d’enceinte (2 m) × 2 / Grille × 2 FIXATION DE LA GRILLE L’enceinte et la grille sont emballées séparément. Pour fixer la grille, alignez les saillies magnétiques situées au dos de la grille sur les têtes de vis correspondantes de l’enceinte. Remarque Lorsque la grille est retirée, prenez soin de ne pas toucher les enceintes avec les mains ou de ne pas appliquer une force excessive avec un outil. RACCORDEMENT À VOTRE RÉCEPTEUR AVANT DE RÉALISER LES RACCORDEMENTS, ASSUREZ-VOUS QUE LE RÉCEPTEUR EST ÉTEINT. Pour raccorder cet appareil au récepteur, reportez-vous aussi au mode d’emploi fourni avec le récepteur. Reportez-vous à la page 1 pour la méthode de connexion. POSITIONNEMENT DES ENCEINTES (L) (R) • Placez les enceintes sur une surface solide et non sujettes à des vibrations. • La qualité des images stéréo sera meilleure si vous tournez légèrement les enceintes vers l’intérieur pour les diriger vers la position d’écoute. • Prenez soin de bien raccorder le canal gauche (L) et le canal droit (R). Remarque Placer les enceintes trop près d’un téléviseur à tube cathodique peut affecter la couleur de l’image ou créer un bourdonnement. Dans ce cas éloignez l’enceinte du téléviseur. Ceci ne représente pas un problème avec des téléviseurs LCD ou au plasma. SPECIFICATIONS Type ..................................................... Enceintes bass-reflex 2 voies Type à blindage non magnétique Pilote..............................................Enceinte grave en cône de 12 cm Haut-parleur d’aigus à pavillon souple de 3 cm Impédance ....................................................................................6 Ω Réponse en fréquence.................................60 Hz à 40 kHz (-10 dB) 100 kHz (-30 dB) Puissance d’entrée nominale .....................................................40 W Puissance d’entrée maximum..................................................110 W Sensibilité ............................................................. 83 dB/2,83 V, 1 m Fréquence de transfert .............................................................. 5 kHz Dimensions (L × H × P) .................................. 154 × 273 × 230 mm Poids .........................................................................................3,3 kg * Les spécification sont sujettes à changement sans notification pour amélioration des performances du produit. * Veillez à ce que les valeurs de puissance d’entrée mentionnées cidessus ne soient pas dépassées. 3 Fr Franç ais PRÉCAUTIONS Deutsch VORSICHTSMASSNAHMEN ANSCHLUSS AN IHREN RECEIVER • Stellen Sie die Lautsprecher an einem kühlen, trockenen, sauberen, stabilen und ebenen Ort auf. • Um elektrische Schläge, Brände, Verletzungen, Schäden an den Lautsprechern oder Verfärbung des Gehäuses zu verhindern, stellen Sie die Lautsprecher entfernt von Fenstern, Wärmequellen, starken Vibrationsquellen, Staub, Feuchtigkeit, Kälte, Regen, Wasser, Störungsquellen (Trafos, Motoren usw.) und direktem Sonnenlicht auf. • Führen Sie Ihre Hand oder einen Fremdkörper nie in die Öffnung des Lautsprechers ein oder greifen Sie den Lautsprecher an der Öffnung, da dies zu Körperverletzungen oder einer Beschädigung des Lautsprechers führen kann. • Jedes Mal, wenn Verzerrung auftritt, reduzieren Sie den Lautstärkepegel am Receiver. Achten Sie darauf, dass der Receiver nie in eine „Begrenzungsverzerrung“ getrieben wird. Anderenfalls könnten die Lautsprecher beschädigt werden. • Wenn Sie einen Receiver verwenden, dessen Nennausgangsleistung höher ist als die Nenneingangsleistung der Lautsprecher, sollten Sie immer darauf achten, dass die maximale Eingangsleistung der Lautsprecher nicht überschritten wird. • Verwenden Sie zum Reinigen der Lautsprecher keine chemischen Lösungsmittel (z.B. Alkohol oder Verdünner usw.), da diese die Appretur beschädigen könnten. Verwenden Sie zum Reinigen ein sauberes, trockenes Tuch. • Versuchen Sie nicht, die Lautsprecher abzuändern oder zu reparieren. Falls Reparaturarbeiten erforderlich sind, wenden Sie sich bitte immer an das qualifizierte Kundendienstpersonal von Yamaha. Das Gehäuse sollte unter keinen Umständen geöffnet werden. • Der Benutzer ist für die sichere Aufstellung oder Montage der Lautsprecher verantwortlich. Yamaha haftet unter keinen Umständen für Unfälle, die auf die unsachgemäße Aufstellung oder Montage der Lautsprecher zurückzuführen sind. VOR DEM HERSTELLEN VON ANSCHLÜSSEN STELLEN SIE SICHER, DASS DER RECEIVER AUSGESCHALTET IST. Wenn dieses Gerät an den Receiver angeschlossen ist, siehe auch mit dem Receiver mitgelieferte Bedienungsanleitung. Siehe Seite 1 zum Anschlussverfahren. ZUBEHÖR Die folgenden Artikel sind im Lieferumfang enthalten. Lautsprecherkabel (2 m) × 2 / Gitter × 2 ANBRINGEN DES GITTERS Der Lautsprecher und das vordere Gitter sind separat verpackt. Um das vordere Gitter anzubringen, richten Sie die vorstehenden Teile (Magnete) der Rückseite des vorderen Gitters an den entsprechenden Schraubenköpfen am Lautsprecher aus. Hinweis Achten Sie beim abgenommenen Gitter darauf, die Lautsprecher nicht mit der Hand zu berühren oder mit einem Werkzeug gewaltsam zu behandeln. 4 De AUFSTELLUNG DER LAUTSPRECHER (L) (R) • Stellen Sie die Lautsprecher auf einer festen, erschütterungsfreien Unterlage auf. • Sie erzielen ein besseres Stereoklangbild, wenn Sie die Lautsprecher etwas schräg in Richtung der Hörposition aufstellen. • Achten Sie auf den korrekten Anschluss des linken Kanals (L) und des rechten Kanals (R). Hinweis Wenn Sie die Lautsprecher zu nahe an einem BildröhrenFernsehgerät aufstellen, können verfälschte Bildfarben oder Brummgeräusche erzeugt werden. Stellen Sie die Lautsprecher in diesem Fall weiter vom Fernseher entfernt auf. Bei LCD- und Plasma-Fernsehgeräten tritt dieses Problem nicht auf. TECHNISCHE DATEN Typ ........................................ 2-Weg-Bassreflex-Lautsprecheranlage Typ ohne Magnetabschirmung Treiber ............................................................ 12-cm-Konustieftöner 3 cm Soft Dome Hochtöner Impedanz ..................................................................................... 6 Ω Frequenzgang ..........................................60 Hz bis 40 kHz (-10 dB) 100 kHz (-30 dB) Nenneingangsleistung................................................................40 W Maximale Eingangsleistung ....................................................110 W Empfindlichkeit .................................................... 83 dB/2,83 V, 1 m Überschneidungsfrequenz .......................................................5 kHz Abmessungen (B × H × T) ...............................154 × 273 × 230 mm Gewicht................................................................................... 3,3 kg * Änderungen der technischen Daten aus Produktverbesserungsgründen ohne vorherige Ankündigung vorbehalten. * Achten Sie besonders darauf, die oben aufgelisteten Werte für die Eingangsleistung nicht zu überschreiten. PRECAUCIONES CONEXIÓN A SU RECEPTOR • Instale los altavoces en un lugar fresco, seco, limpio, estable, y horizontal. • Para evitar descargas eléctricas, incendios, lesiones, No inserte la mano ni ningún objeto daños a los altavoces, y la decoloración de las cajas, instálelos alejados de ventanas, fuentes de calor, fuentes de vibraciones excesivas, polvo, humedad, frío, lluvia, agua, objetos que caigan, fuentes de ruido (transformadores, motores, etc.) y de la luz solar directa. • No inserte la mano ni ningún objeto en el orificio ni tome el altavoz sujetándolo por dicho orificio, ya que podrían producirse lesiones o daños del altavoz. • Cada vez que note distorsión, reduzca el volumen en su receptor a un ajuste inferior. No permita nunca que su receptor produzca “cortes acústicos” porque, de lo contrario, sus altavoces podrán dañarse. • Cuando utilice un receptor con una potencia de salida nominal más alta que la potencia de entrada nominal de los altavoces, deberá tener cuidado para no sobrepasar nunca la entrada máxima de los altavoces. • No intente limpiar los altavoces con disolventes químicos (por ejemplo, alcohol, diluyentes, etc.); porque éstos podrían dañar su acabado. Utilice un paño limpio y seco. • No intente modificar ni arreglar los altavoces. Póngase en contacto con el personal de servicio Yamaha cualificado cuando necesite tener que hacer alguna reparación. La caja no deberá abrirse nunca por ninguna razón. • La colocación o instalación segura es responsabilidad del propietario. Yamaha no se hará responsable por ningún accidente causado por una mala colocación o instalación de los altavoces. ANTES DE REALIZAR LAS CONEXIONES, CERCIÓRESE DE QUE EL RECEPTOR ESTÉ APAGADO. Para conectar esta unidad al receptor, consulte también el manual del usuario suministrado con el receptor. Con respecto al método de conexión, consulte la página 1. ACCESORIOS ESPECIFICACIONES Se incluyen los siguientes elementos. 2 cables de altavoces (2 m) / Reja × 2 FIJACIÓN DE LA REJA El altavoz y la reja se suministran por separado. Para fijar la reja, alinee las proyecciones (imanes) del reverso de la reja con las cabezas de tornillo correspondientes del altavoz. Nota Cuando quite la reja, asegúrese de no tocar las unidades de altavoces con sus manos ni aplicar una fuerza excesiva con herramientas. COLOCACIÓN DE LOS ALTAVOCES (D) • Coloque los altavoces en una superficie fuerte y sin vibraciones. • Cuando los altavoces estén dirigidos hacia la posición de escucha podrá obtenerse una imagen estéreo mejor. • Asegurarse de conectar el canal izquierdo (I) y el canal derecho (D) correctamente. Nota Si se colocan los altavoces demasiado cerca a un televisor de tipo CRT se puede dañar el color de las imágenes o causar un zumbido. En este caso, poner los altavoces lejos del televisor. Este problema no se presenta con los televisores de plasma y LCD. Tipo ................... Sistema de altavoces de reflejo de graves de 2 vías Tipo sin blindaje magnético Excitador ....................................Altavoz de graves cónico de 12 cm Altavoz de agudos de cúpula blanda de 3 cm Impedancia ...................................................................................6 Ω Respuesta de frecuencia .............................60 Hz a 40 kHz (-10 dB) 100 kHz (-30 dB) Potencia de entrada nominal .....................................................40 W Potencia de entrada máxima....................................................110 W Sensibilidad .......................................................... 83 dB/2,83 V, 1 m Frecuencia de cruce .................................................................. 5 kHz Dimensiones (An × Al × Prof) .........................154 × 273 × 230 mm Peso ..........................................................................................3,3 kg * Las especificaciones están sujetas a cambios sin previo aviso. * Deberá tenerse mucho cuidado para no sobrepasar los valores de potencia de entrada indicados más arriba. 5 Es Español (I) 注意 放置扬声器 • 将扬声器安装于阴凉、干燥、清洁、稳固、水平处。 • 为了避免触电、火灾、受伤、损坏扬声器或外壳变色,安装 地点应远离窗户、热源、强震动源、灰尘、潮湿处、寒冷 处、雨、水、坠落物、噪声源 (变压器、电动机等)和直 射阳光。 • 不要将手或其他物体伸入扬声器孔或握住孔拿起扬声器,因 为这样会导致人身伤害或损坏扬声器。 • 如果您察觉到失真﹐请降低接收机的音量。不要将接收机调 节到极限位置。要不然﹐扬声器就会损坏。 • 如果使用的接收机的额定输出功率高于扬声器的名义输入功 率﹐就必须注意﹐不要使得输入超过扬声器的最大输入。 • 不要使用化学溶剂 (例如酒精或稀释剂等)清洗扬声器﹐ 以免损坏其表面涂层。请使用清洁的干布。 • 不要试图改装或修理扬声器。如果需要服务﹐请与 Yamaha 的 服务人员联系。任何时候都不要打开壳体。 • 安全的放置和安装是用户自己应负的责任。对于扬声器的不 妥当放置和安装所引起的事故﹐ Yamaha 不负任何责任。 (左) • 请将扬声器放置在结实且无震动的平面。 • 如果扬声器能够朝向听音位置稍微倾斜﹐就能得到更好的立 体声像。 • 请确认正确连接左声道和右声道。 注意 扬声器过度靠近 CRT (阴极射线管)电视机时可能会影响电视 机图像的色彩或产生蜂鸣噪声。在此情况下,请把扬声器从电 视机处移开。液晶显示器和等离子电视不会出现此类问题。 附件 中文 (右) 规格 包含下列物品。 扬声器电缆 (2 m) × 2 / 格栅 × 2 类型 ........................... 双向低音反射扬声器系统 隔磁屏型 发音单元 ....................... 12 cm 锥盆超低音扬声器 3 cm 软圆顶高频扬声器 阻抗 .............................................. 6 欧 频率响应 ........................ 60 Hz - 40 kHz(-10 dB) 100 kHz (-30 dB) 名义输入功率 ..................................... 40 W 最大输入功率 .................................... 110 W 敏感度 .............................. 83 dB/2.83 V,1 m 分频频率 ........................................ 5 kHz 尺寸 ( 宽 × 高 × 深 ) ............... 154 × 273 × 230 mm 重量 ........................................... 3.3 kg * 因为产品改良﹐规格可能时有变化。 * 必须注意﹐输入功率不能超过上述数值。 安装格栅 扬声器和格栅是分开包装的。安装格 栅时,请将格栅反面的凸出部分 (磁 体)对准扬声器上对应的螺钉头。 注意 当格栅去掉后﹐请一定不要用手触摸 扬声器单元或使用工具对其施力。 连接到接收机 在进行连接之前,请确认接收机的电源已经关闭。 将本机连接到接收机时,请同时参考接收机附带的用户使用说 明书。 请对照第一页参考连接方法。 : 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 : 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 有毒有害物质或元素 部件名称 外壳箱体 扬声器单元 6 Zh 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) Меры предосторожности ПОДКЛЮЧЕНИЕ К РЕСИВЕРУ • Устанавливайте колонки в прохладном, сухом, чистом помещении на устойчивой горизонтальной поверхности. • Во избежание поражения электрическим током, пожара, получения травмы, повреждения колонок и обесцвечивания корпуса устанавливайте колонки подальше от окон, источников тепла, чрезмерной вибрации, пыли, влаги, холоди источников шума (трансформаторов, двигателей и т.п.), в местах, недоступных для дождя, воды, прямого солнечного света, и безопасных с точки зрения возможности падения на колонки других предметов. • Не просовывайте руки или другие предметы в отверстие, и не поднимайте колонки за это отверстие – это может стать причиной травмирования или повредить колонки. • В случае искажения звучания понизьте уровень громкости на ресивере. Не допускайте “срезания” звука ресивером. В противном случае єто может стать причиной повреждения колонок. • При использовании ресивера с номинальной выходной мощностью, превышающей номинальную входную мощность колонок, необходимо следить за непревышением максимальной входной мощности колонок. • Не пытайтесь использовать различные химические составы (например, алкоголь или разбавители и др.); для очистки колонок. Это может привести к разрушению покрывающего слоя. Используйте чистую сухую ткань. • Не пытайтесь модифицировать или чинить колонки. При необходимости обратитесь к квалифицированному сотруднику сервисного центра Yamaha. Ни в коем случае не следует открывать корпус аппарата. • Ответственность за безопасность размещения и установку несёт владелец. Компания Yamaha не несёт ответственность за какие-либо несчастные случаи, вызванные ненадлежащим размещением или установкой динамиков. ПЕРЕД ВЫПОЛНЕНИЕМ ПОДКЛЮЧЕНИЙ УБЕДИТЕСЬ В ТОМ, ЧТО РЕСИВЕР ОТКЛЮЧЕН. Если данный прибор подключен к ресиверу, ознакомьтесь с инструкциями, содержащимися в руководстве пользователя ресивера. Что касается метода подключения, см. стр. 1. РАЗМЕЩЕНИЕ КОЛОНОК (L) (R) • Устанавливайте динамики на устойчивой невибрирующей поверхности. • Наилучшее качество стереозвучания достигается в случае установки колонок под некоторым углом к расположению слушателя. • Проверьте, что левый канал (L) и правый канал (R) правильно соединены. АКСЕССУАРЫ В комплект поставки входят следующие детали. Кабель колонки (2 м) × 2 / Решетка × 2 ЗАКРЕПЛЕНИЕ РЕШЕТКА Решетка запакована отдельно от акустической системы. Чтобы установить решетка, совместите выступающие части (магниты) на заднейчасти решетка с соответствующими головками винтов на акустической системе. Примечание Не касайтесь частей колонки руками и не прилагайте дополнительных усилий при работе инструментами с колонкой со снятой решетка. ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ Тип ................ 2-полосная акустическая система с фронтальным отражением звуковой волны Экранирование немагнитными материалами Головка ............низкочастотный динамик куполообразного типа диаметром 12 см Высокочастотный динамик с мягким куполом диаметром 3 см Импеданс .....................................................................................6 Ω Частотные характеристики ...................... 60 Гц - 40 кГц (-10 дБ) 100 кГц (-30 дБ) Номинальная входная мощность .......................................... 40 Вт Максимальная входная мощность ..................................... 110 Вт Чувствительность ................................................ 83 дБ/2,83 В, 1 м Частота кроссоверов .............................................................. 5 кГц Габариты (Ш × В × Г) .................................... 154 × 273 × 230 мм Вес............................................................................................ 3,3 кг * В результате усовершенствования изделия технические характеристики могут изменяться без предварительного уведомления. * Необходимо следить за непревышением вышеуказанных значений входной мощности. 7 Ru Русский Примечание Размещение колонок слишком близко к ЭЛТтелевизору может ухудшить цветность изображения или вызвать появление мерцающих помех. В таком случае установите колонки подальше от телевизора. Такие проблемы не возникают с ЖКД и плазменными телевизорами. English Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Information concernant la Collecte et le Traitement des déchets d’équipements électriques et électroniques. Français Le symbole sur les produits, l’emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels. Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques, veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives 2002/96/EC. En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauvegarde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors d’un traitement inapproprié des déchets. Pour plus d’informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques, veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les produits. [Information sur le traitement dans d’autres pays en dehors de l’Union Européenne] Ce symbole est seulement valables dans l’Union Européenne. Si vous souhaitez vous débarrasser de déchets d’équipements électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement appropriée. Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte Deutsch Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten benutzte elektrische Geräte nicht mit dem normalen Haushaltsabfall entsorgt werden. In Übereinstimmung mit Ihren nationalen Bestimmungen und den Richtlinien 2002/96/EC, bringen Sie alte Geräte bitte zur fachgerechten Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen. Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle Ressourcen zu schützen und verhindern mögliche negative Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Müllentsorgung auftreten könnten. Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte, kontaktieren Sie bitte Ihre örtliche Stadt- oder Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel. [Entsorgungsinformation für Länder außerhalb der Europäischen Union] Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausrangieren möchten, kontaktieren Sie bitte Ihre örtlichen Behörden oder Ihren Händler und fragen Sie nach der sachgerechten Entsorgungsmethode. Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo Español Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usados no deben ser mezclados con desechos hogareños corrientes. Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de acuerdo a su legislación nacional y las directivas 2002/96/EC. Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto negativo sobre la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos. Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio de gestión de residuos o el punto de venta en el cual usted adquirió los artículos. [Información sobre la Disposición en otros países fuera de la Unión Europea] Este símbolo sólo es válidos en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autoridades locales y pregunte por el método correcto de disposición. © 2013 Yamaha Corporation Printed in Indonesia ZH10800
1 / 1

Yamaha MCRN560BBR Handleiding

Categorie
Luidsprekers
Type
Handleiding