Spangenberg International B.V. – Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
info@spangenberg.nl - www.maximaholland.com
First Time Use
•Unpack and inspect your machine immediately after receipt. If there are any latent defects or damages to
the machine then immediately contact the freight carrier as well as your dealer. Save all packaging materials
for inspection by the freight carrier.
•Read this instruction manual completely before attempting to install and operate this product. All
installations and set ups must be done by authorized service agents, your dealer, or Maxima
representatives.
•The machine must be positioned on a flat surface with sufficient space around the machine to allow for easy
access to the machine, and for cleaning and ventilation.
•If your machine is supplied with a factory fitted molded plug then you may plug the unit into a standard
electrical outlet. Make sure that the voltage of the machine and the wall outlet are compatible. If your
machine is not supplied with a factory fitted molded plug then a qualified electrical technician must be
contracted to wire the unit to the power supply.
•Before using your machine for the first time it is recommended that the exterior of the machine is wiped
down with a damp cloth, and the worksurfaces, attachments or attributes are cleaned using a food safe
cleaning detergent and rinsed with warm water.
•After cleaning, wait for appliance to dry completely and then plug the appliance into the power socket.
•Level and position the machine in such a way that the plug is accessible at all times.
Operation
•Plug the machine into the main socket.
•Before switching on the machine, select the desired mixing speed using the speed handle. It is critical to
select an appropriate speed when mixing heavy dough. Only use the lowest speed when mixing heavy
dough.
•ATTENTION! Never overload the machine. When processing heavy dough, do not fill the bowl for more than
50% of its capacity. In case of heavy operation the maximum capacity may even be less. Consult your
supplier in case of doubt.
•Once the speed has been selected, press the start button to activate the mixer. The safety guard must be
closed for the mixer to operate. If the safety guard is open or not closed properly then the mixer will not
start.
•ATTENTION! In order to prolong the life span of the motor and gearbox, it is required that the mixer is
turned off before switching from one speed to another. To change speeds, stop the mixer. You can change
the speed once the mixing attachment has stopped rotating. Select the desired speed using the speed
handle or button and press the start button to reactivate the mixer.
•When mixing light batches it is recommended that the mixer is not used continuously for more than 30
minutes. Allow the machine to cool down for approximately 15 minutes between mixing cycles.
•When mixing heavy batches it is recommended that the mixer is not used continuously for more than 20
minutes. Allow the machine to cool down for approximately 30 minutes between mixing cycles.
•Should the machine not be used for a longer period, please remove the plug from the main socket.