Yamaha RX-V440 Handleiding

Merk: Yamaha

Model: RX-V440

Categorie: AV-ontvangers

Type: Handleiding

Deze handleiding is ook geschikt voor

RX-V540

OWNER’S MANUAL

RX-V540/RX-V440

AV Receiver

0100RX-V540440-cv1_EN-U.p65 02.12.20, 3:21 PM1

I CAUTION

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to alert

you to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert you to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

1 Read Instructions – All the safety and operating instructions

should be read before the product is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the product and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and use instructions

should be followed.

5 Cleaning – Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

6 Attachments – Do not use attachments not recommended

by the product manufacturer as they may cause hazards.

7 Water and Moisture – Do not use this product near water –

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool;

and the like.

8 Accessories – Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall,

causing serious injury to a child or adult, and serious

damage to the product. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the product. Any mounting of the product should

follow the manufacturer’s instructions, and should use a

mounting accessory recommended by the manufacturer.

9 A product and cart combination should be

moved with care. Quick stops, excessive

force, and uneven surfaces may cause the

product and cart combination to overturn.

10 Ventilation – Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should not

be placed in a built-in installation such as a bookcase or

rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

11 Power Sources – This product should be operated only from

the type of power source indicated on the marking label. If

you are not sure of the type of power supply to your home,

consult your product dealer or local power company. For

products intended to operate from battery power, or other

sources, refer to the operating instructions.

12 Grounding or Polarization – This product may be equipped

with a polarized alternating current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

13 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

14 Lightning – For added protection for this product during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line

surges.

15 Power Lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touching

such power lines or circuits as contact with them might be

fatal.

16 Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result

in a risk of fire or electric shock.

17 Object and Liquid Entry – Never push objects of any kind

into this product through openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on

the product.

18 Servicing – Do not attempt to service this product yourself

as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19 Damage Requiring Service – Unplug this product from the

wall outlet and refer servicing to qualified service personnel

under the following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into

the product,

c) If the product has been exposed to rain or water,

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

0101RX-V540440_Cau_EN-U.p65 02.12.20, 3:26 PM2

CAUTION II

1. IMPORTANT NOTICE : DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved

by Yamaha may void your authority, granted by the

FCC, to use the product.

2. IMPORTANT : When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation

instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE : This product has been tested and found to

comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a

reasonable level of assurance that your use of this

product in a residential environment will not result in

harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and,

if not installed and used according to the instructions

found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee

that interference will not occur in all installations. If

this product is found to be the source of interference,

which can be determined by turning the unit “OFF” and

“ON”, please try to eliminate the problem by using one

of the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon

lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810–20)

GROUNDING CONDUCTORS

(NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC

– NATIONAL ELECTRICAL CODE

FCC INFORMATION (for US customers)

Note to CATV system installer:

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the

grounding system of the building, as close to the point of

cable entry as practical.

d) If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its normal

operation,

e) If the product has been dropped or damaged in any

way, and

f) When the product exhibits a distinct change in

performance - this indicates a need for service.

20 Replacement Parts – When replacement parts are

required, be sure the service technician has used

replacement parts specified by the manufacturer or have

the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric

shock, or other hazards.

21 Safety Check – Upon completion of any service or

repairs to this product, ask the service technician to

perform safety checks to determine that the product is in

proper operating condition.

22 Wall or Ceiling Mounting – The unit should be mounted

to a wall or ceiling only as recommended by the

manufacturer.

23 Heat – The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

24 Outdoor Antenna Grounding – If an outside antenna or

cable system is connected to the product, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA

70, provides information with regard to proper grounding of

the mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit, connection

to grounding electrodes, and requirements for the

grounding electrode.

0101RX-V540440_Cau_EN-U.p65 02.12.20, 3:26 PM3

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool,

dry, clean place — away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 30 cm on the top,

20 cm on the left and right, and 20 cm on the back

of this unit.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in a environment with high humidity (i.e. a room with

a humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage to

this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed

to liquid dripping or splashing. On the top of this

unit, do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

–

Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the

user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation.

If the temperature inside this unit rises, it may

cause fire, damage to this unit, and/or personal

injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set

this unit in standby mode, and disconnect the AC

power plug from the wall outlet.

VOLTAGE SELECTOR (China and General models only)

The VOLTAGE SELECTOR on the rear panel of this

unit must be set for your local main voltage

BEFORE plugging into the AC main supply.

Voltages are 110/120/220/240 V AC, 50/60 Hz.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet,

even if this unit itself is turned off. This state is called

standby mode. In this state, this unit is designed to

consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

IMPORTANT

Please record the serial number of this unit in the

space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

III CAUTION

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer

Electronics Group want you to get the most out of your equipment

by playing it at a safe level. One that lets the sound come through

loud and clear without annoying blaring or distortion – and, most

importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often

undetectable until it is too late, YAMAHA and the

Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid

prolonged exposure from excessive volume levels.

0101RX-V540440_Cau_EN-U.p65 02.12.20, 3:26 PM4

English

INTRODUCTION

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

CONTENTS

INTRODUCTION

CONTENTS ............................................................ 1

FEATURES ............................................................. 2

GETTING STARTED ............................................ 3

Supplied accessories .................................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel................................................................. 4

Remote control .......................................................... 6

Front panel display .................................................... 8

ADVANCED OPERATION

SET MENU ........................................................... 38

Set menu list ............................................................ 38

Adjusting the items on the set menu ....................... 38

SOUND 1 SPEAKER SET (speaker mode settings)

............................................................................. 39

SOUND 2 SP DISTANCE (speaker distance) ........ 41

SOUND 3 LFE LEVEL .......................................... 41

SOUND 4 D. RANGE (dynamic range) ................. 41

SOUND 5 CENTER GEQ

(center graphic equalizer) .................................... 42

SOUND 6 HP TONE CTRL

(headphone tone control) .................................... 42

INPUT 1 I/O ASSIGN (input/output assignment) .. 42

INPUT 2 INPUT MODE (initial input mode) ........ 43

OPTION 1 DISPLAY SET ...................................... 43

OPTION 2 MEM. GUARD (memory guard) ......... 43

OPTION 3 AUDIO MUTE ..................................... 43

OPTION 4 ZONE SET ........................................... 44

REMOTE CONTROL FEATURES ................... 45

Control area ............................................................. 45

Setting the manufacturer code ................................. 46

Clearing setup manufacturer codes ......................... 46

Controlling other components ................................. 47

SETTING THE SPEAKER LEVELS ................ 48

Adjusting the volume during playback ................... 48

Using the test tone ................................................... 48

PREPARATION

CONNECTIONS .................................................... 9

Before connecting components ................................. 9

Connecting video components ................................ 10

Connecting audio components ................................ 12

Connecting the antennas.......................................... 13

Connecting an external decoder .............................. 14

Connecting the speakers .......................................... 15

Connecting the power supply cords ........................ 18

Turning on the power .............................................. 18

BASIC SYSTEM SETTINGS ............................. 19

Using the basic menu .............................................. 19

Setting the unit to match your speaker system ........ 21

Setting speaker output levels (SP LEVEL) ............. 21

BASIC OPERATION

PLAYBACK .......................................................... 22

Input modes and indications .................................... 24

Selecting a sound field program .............................. 25

DIGITAL SOUND FIELD PROCESSING (DSP)

............................................................................ 28

Understanding sound fields ..................................... 28

Hi-Fi DSP programs ................................................ 28

CINEMA-DSP ...................................................... 29

Sound design of CINEMA-DSP ............................. 29

CINEMA-DSP Programs ........................................ 29

Sound field effects ................................................... 31

TUNING ................................................................ 32

Presetting stations .................................................... 33

Selecting a preset station ......................................... 35

SLEEP TIMER ..................................................... 36

RECORDING ....................................................... 37

ADDITIONAL INFORMATION

SOUND FIELD PROGRAM PARAMETER

EDITING .......................................................... 49

Changing parameter settings ................................... 49

Digital sound field parameter descriptions .............. 50

TROUBLESHOOTING ....................................... 51

GLOSSARY .......................................................... 55

SPECIFICATIONS .............................................. 57

0102RX-V540440_01-08_EN-U.P65 02.12.20, 3:27 PM1

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are

trademarks of Dolby Laboratories.

FEATURES

Multi-mode digital sound field processing

◆ Dolby Pro Logic/Dolby Pro Logic II decoder

◆ Dolby Digital/Dolby Digital EX decoder

◆ DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6

Decoder

◆ CINEMA DSP: Combination of YAMAHA DSP

technology and Dolby Pro Logic, Dolby Digital or

DTS

◆ Virtual CINEMA DSP

◆ SILENT CINEMA DSP

Sophisticated AM/FM Tuner

◆ 40-Station random access preset tuning

◆ Automatic preset tuning

◆ Preset station shifting capability (Preset editing)

Other features

◆ 96 kHz/24-bit D/A converter

◆ Set menu for optimizing this unit for your Audio/

Video system

◆ Test tone generator for easier speaker balance

adjustment

◆ 6-channel external decoder input

◆ Component video input/output capability

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Remote control with preset manufacturer codes

◆ Zone B capability

RX-V540

◆ S-video signal input/output capability

◆ Video Conversion (Composite Video ⇔ S Video)

“DTS”, “DTS-ES Extended Surround” and “Neo:6” are

trademarks of Digital Theater System, Inc.

Built-in 6-channel power amplifier

◆ Minimum RMS output power

(0.06% THD, 20 Hz – 20 kHz, 8Ω)

RX-V540

[U.S.A. and Canada models]

Main: 80 W + 80 W

Center: 80 W

Rear: 80 W + 80 W

Rear center: 80 W

[Other models]

Main: 70 W + 70 W

Center: 70 W

Rear: 70 W + 70 W

Rear center: 70 W

RX-V440

[U.S.A. and Canada models]

Main: 75 W + 75 W

Center: 75 W

Rear: 75 W + 75 W

Rear center: 75 W

[Other models]

Main: 65 W + 65 W

Center: 65 W

Rear: 65 W + 65 W

Rear center: 65 W

■ About this manual

• This document is the owner’s manual for both the RX-V540 and RX-V440. For details on various functions unique to

each model, descriptions given for each model name.

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases

when the button names differ between the main unit and the remote control, the button name on the remote control is

given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part for the reason of

the improvement in operativity ability, and others. In this case, the product has priority.

0102RX-V540440_01-08_EN-U.P65 02.12.20, 3:27 PM2

English

INTRODUCTION

Installing batteries in the remote

control

Insert the batteries in the correct direction by aligning the

+ and – marks on the batteries with the polarity markings

(+ and –) inside the battery compartment.

1 Press the part marked with a and slide off

the battery compartment cover.

2 Insert the four batteries supplied (AAA, R03,

UM-4) according to the polarity markings on

the inside of the battery compartment.

3 Slide the cover back on so that it snaps into

place.

■ Notes on batteries

• Change all of the batteries if you notice a decrease in

the operating range of the remote control, that the

indicator does not flash, or the light becoming dim.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline

and manganese batteries) together. Read the packaging

carefully as these different types of batteries may have

the same shape and color.

• If the batteries have leaked, dispose of them

immediately. Avoid touching the leaked material or

letting it come into contact with clothing, etc. Clean the

battery compartment thoroughly before installing new

batteries.

If the remote control is without batteries for more than

2 minutes, or if exhausted batteries remain in the

remote control, the contents of the memory may be

cleared. When the memory is cleared, insert new

batteries, set up the manufacturer code and program

any acquired functions that may have been cleared.

AM loop antenna

(Europe, U.K., Australia and

Singapore models)

Indoor FM antenna

(U.S.A., Canada, China,

Korea and General models)

Batteries (4)

(AAA, R03, UM-4)

Remote control

GETTING STARTED

Supplied accessories

After unpacking, check that the following parts are contained.

75-ohm/300-ohm antenna

adapter (U.K. model)

POWER

SLEEP

CODE SET

STANDBY

TRANSMIT

6CH INPUT

SYSTEM

AUX

TV/CBL

REC

DISC SKIP

SET MENU

SELECT

PRESET/CH

TV INPUTTV MUTE

A/B/C/D/E

AUDIO

VOLUME

LEVEL

TEST

STEREO

EFFECT

RETURN

DISPLAY

TITLE

MUTE

AMP

POWER POWER

AVTV

VCR

DVD

MD/CD-R TUNERCD

–

TV CHTV VOL

–

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

0102RX-V540440_01-08_EN-U.P65 02.12.20, 3:27 PM3

CONTROLS AND FUNCTIONS

Front panel

1 STANDBY/ON

Turns the unit on, or sets it in standby mode. When you

turn the unit on, you will hear a click and there will be a 4

to 5-second delay before it can reproduce sound.

Standby mode

In this mode, the unit uses a small amount of power in

order to receive infrared-signals from the remote

control.

2 INPUT MODE

Sets the priority for the types of input signals (AUTO,

DTS, ANALOG) received when one component is

connected to two or more input jacks. You cannot set

priority for an audio source if you have selected 6CH

INPUT as the input source.

3 INPUT

Selects the input source you want to listen to or watch.

4 6CH INPUT

Selects the audio source connected to the 6CH INPUT

jacks. This selection takes priority over sources selected

with INPUT (or the input selector buttons on the remote

control).

5 Remote control sensor

Receives signals from the remote control.

6 Front panel display

Shows information about the operational status of the

unit.

7 TUNING MODE (AUTO/MAN’L MONO)

Switches the tuning mode between automatic and manual.

8 PRESET/TUNING (EDIT)

Switches the function of PRESET/TUNING l / h

between selecting a preset station number and tuning (the

colon (:) turns on or off).

This button is also used to exchange the assignment of

two preset stations with each other.

9 FM/AM

Switches the reception band between FM and AM.

0 MEMORY (MAN’L/AUTO FM)

Stores the current station in memory.

q VOLUME

Controls the output level of all audio channels.

This does not affect the OUT (REC) level.

(U.K. and Europe models only)

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

MODE START

PTY SEEK

EDIT

RDS MODE/FREQ

EON

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

1 32 4 8756 q9

a s fd

MODE START

RDS MODE/FREQ

PTY SEEK

EON

w r y o

0102RX-V540440_01-08_EN-U.P65 02.12.20, 3:27 PM4

English

INTRODUCTION

w SILENT (PHONES jack)

Allows you to enjoy DSP effects when listening with

headphones. When you connect headphones to the

headphone jack, no signals are output to the speakers.

e SPEAKERS A/B

Turns the set of main speakers connected to the A and/or

B terminals on or off.

r STEREO/EFFECT

Switches between normal stereo and DSP effect

reproduction. When you select STEREO, the unit mixes

down all Dolby Digital and DTS signals (except the LFE

channel) as well as those 2-channel signals without

effects, to the main left and right speakers.

t PROGRAM l / h

Select the DSP program.

y A/B/C/D/E

Selects preset station groups A to E when the unit is in

tuner mode.

Selects the set menu mode when the unit is not in tuner

mode.

u PRESET/TUNING l / h

Select preset station numbers 1 to 8 when a colon (:) is

displayed in the front panel display.

Select the tuning frequency when a colon (:) is not

displayed when the unit is in tuner mode.

SET MENU –/+

Adjust settings on the set menu when the unit is not in

tuner mode.

i CONTROL

Switches between Bass (low-frequency response) control

mode and Treble (high-frequency response) control mode.

o BASS/TREBLE –/+

Increase or decrease low/high-frequency response when

the unit is in Bass/Treble control mode. The sound

changes 2dB each time you press one of these buttons.

Control range: –10 to +10dB

p VIDEO AUX jacks

Inputs for audio and video signals from a portable

external source (game console, etc.). Set the input source

to V-AUX to select source signals from these jacks.

(U.K. and Europe models only)

a RDS MODE/FREQ

Press this button when the unit is receiving an RDS

station, to cycle the display mode among PS mode,

PTY mode, RT mode, CT mode (if the station offers

those RDS data service) and/or frequency display

mode in turn.

s PTY SEEK MODE

Press this button to set the unit in the PTY SEEK

mode.

d PTY SEEK START

Press this button to begin searching for a station after

the desired program type has been selected in the PTY

SEEK mode.

f EON

Press this button to select a radio program type

(NEWS, INFO, AFFAIRS, SPORT) to tune in

automatically.

CONTROLS AND FUNCTIONS

0102RX-V540440_01-08_EN-U.P65 02.12.20, 3:27 PM5

POWER

SLEEP

CODE SET

STANDBY

TRANSMIT

6CH INPUT

SYSTEM

AUX

TV/CBL

REC

DISC SKIP

SET MENU

SELECT

PRESET/CH

TV INPUT

TV MUTE

A/B/C/D/E

AUDIO

VOLUME

LEVEL

TEST

STEREO

EFFECT

RETURN

DISPLAY

TITLE

MUTE

AMP

POWER POWER

AVTV

VCR

DVD

MD/CD-R TUNERCD

–

TV CHTV VOL

–

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

Remote control

1 Infrared window

Outputs infrared control signals. Aim this window at the

component you want to operate.

2 CODE SET

Used to set up manufacturer codes (see page 46).

3 Input selector buttons

Select the input source and set the remote control to

operate the selected source component.

4 DSP program

Select DSP programs when the remote control is in AMP

mode. Press one of these buttons repeatedly to select a

DSP program within a program group.

5 LEVEL

Selects the effect speaker channel to adjust.

6 Multi control section

Used to change and implement settings.

7 TEST

Outputs a test tone for use when adjusting the speaker

levels.

8 TRANSMIT indicator

Flashes while the remote control is sending signals.

9 STANDBY

Sets this unit in standby mode.

0 SYSTEM POWER

Turns on the power of the unit.

q SLEEP

Sets the sleep timer.

w 6CH INPUT

Selects the audio source connected to the 6CH INPUT

jacks.

e AMP

Switches the function of the same controls between AMP

and the component selected using the input selector

buttons.

r ★/★★

Sets the remote control to operate other components (not

necessarily connected to this unit) without changing this

unit’s input source.

t VOLUME +/–

Increases or decreases the volume level.

CONTROLS AND FUNCTIONS

This section describes the remote control controls and

their functions. Make sure that the AMP mode is selected

before starting operation.

0102RX-V540440_01-08_EN-U.P65 02.12.20, 3:27 PM6

English

INTRODUCTION

Approximately 6 m (20 feet)

■ Using the remote control

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the main unit during operation.

■ Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– high humidity or temperature such as near a heater,

stove or bath;

– dusty places; or

– in places subject to extremely low temperatures.

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

30° 30°

CONTROLS AND FUNCTIONS

y MUTE

Mutes the sound. Press again to restore the audio output

to the previous volume level.

u 6.1/5.1

Switches the Dolby Digital EX or DTS ES decoder on or

off.

i STEREO/EFFECT

Switches between normal stereo and DSP effect

reproduction. When you select STEREO the unit mixes

down all Dolby Digital and DTS signals (except the LFE

channel) as well as those 2-channel signals without effect

sounds, to the main left and right speakers.

o NIGHT

Sets the unit in night listening mode.

p SET MENU

Selects the set menu mode.

0102RX-V540440_01-08_EN-U.P65 02.12.20, 3:27 PM7

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

DISCRETEMATRIX

DIGITAL

PCM

SILENT

DSP

HiFi

NIGHT

VIRTUAL

A B

AUTO

STEREO

SLEEP

VOLUME

MUTE

MEMORYTUNED

L C R

RLLFE RC RR

~~~~~~~~~~~~~~

CTRTPTYPS

HOLDPTYEON

90qw yer uiop

1 Processor indicators

The indicators for the various decoders light up when the

decoders are in use.

2 VIRTUAL indicator

Lights up when using Virtual CINEMA DSP.

3 Headphones indicator

Lights up when headphones are connected to the

headphone jack.

4 Input source indicator

Highlights the current input source with a cursor.

5 Sound field indicator

Displays the sound field management the unit is using

when you listen to a DSP sound field program.

6 AUTO indicator

Shows that this unit is in the automatic tuning mode.

7 MUTE indicator

Flashes while the MUTE function is on.

8 VOLUME level indicator

Indicates the volume level.

9 PCM indicator

Lights up when this unit is reproducing PCM (pulse code

modulation) digital audio signals.

0 SILENT indicator

Lights up when headphones are connected and the digital

sound field processor is on.

q SP A B indicator

Lights up to indicate which set of main speakers is

selected. Both indicators light up when both sets of

speakers are selected.

w NIGHT indicator

Lights up when the unit is set to night listening mode.

e HiFi DSP indicator

Lights up when you select a Hi-Fi DSP sound field

program.

r CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound field

program.

t Multi-information display

Shows the current DSP program name and other

information when you are adjusting or changing settings.

y STEREO indicator

Lights up when the unit is receiving a strong signal from

a FM stereo broadcast while the “AUTO” indicator is lit.

u TUNED indicator

Lights up when this unit is tuned to a radio station.

i MEMORY indicator

Flashes to show a station can be stored in memory.

o SLEEP indicator

Lights up while the sleep timer is on.

p LFE indicator

Lights up when the input signal contains an LFE signal.

a Input channel indicator

The indicators for the appropriate sound channels light up

when a digital signal from a source is played back.

s RDS indicator (U.K. and Europe models only)

The name(s) of the RDS data offered by the currently

received RDS station light(s) up.

EON indicator lights up when an RDS station that offers

the EON data service is being received.

PTY HOLD indicator lights up while searching for

stations in the PTY SEEK mode.

Front panel display

(U.K. and Europe models only)

CONTROLS AND FUNCTIONS

0102RX-V540440_01-08_EN-U.P65 02.12.20, 3:27 PM8

English

PREPARATION

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the

mains power until all connections between the

components have been completed.

• Be sure all connections are made correctly, that is to

say L (left) to L, R (right) to R, “+” to “+” and “–” to

“–”. Some components require different connection

methods and have different jack names. Refer to the

operation instructions for each component you wish to

connect to this unit.

• After you have completed all connections, check them

again to make sure they are correct.

• The jack names correspond to the names on the input

selector.

■ Connecting to digital jacks

This unit has digital jacks for direct transmission of

digital signals through either coaxial or fiber optic cables.

You can use the digital jacks to input PCM, Dolby Digital

and DTS bitstreams. Use digital connections if you wish

to enjoy the multi-channel sound track of DVD material,

etc. with DSP effects. All digital input jacks are

acceptable for 96 kHz sampling digital signals.

Note

• The OPTICAL jacks on this unit conform to the EIA standard.

If you use a fiber optic cable that does not conform to this

standard this unit may not function properly.

AC OUTLETS

(page 18)

6CH INPUT jacks

(page 14)

DIGITAL OUTPUT jack

(page 12)

DIGITAL INPUT jacks

(pages 9 – 12)

Antenna input terminals

(page 13)

Speaker terminals

(page 17)

Video component jacks

(pages 10 – 11)

Audio component jacks

(page 12)

SUBWOOFER OUTPUT

jack (page 17)

This jack is reserved for factory use.

Do not connect any equipment to this jack.

MAIN

CENTER

R L

CENTER

SUB

WOOFER

SUB

WOOFER

6CH INPUT OUTPUT

DIGITAL

OUTPUT

DIGITAL

INPUT

VIDEOAUDIOAUDIO

MD/CD-R

DVD

D-TV/CBL

OPTICAL

COAXIAL

VCR

OUT

MONITOR OUT

DVD

D-TV

/CBL

/CD-R

OUT

(REC)

(PLAY)

SURROUND

MAIN

S VIDEOVIDEO

TUNER

75Ω UNBAL.

ANT

GND

ANT

SPEAKERS

REAR

(SURROUND)

REAR

CENTER

R L

DVD

B Y

COMPORNENT VIDEO

D-TV

/CBL

MONITOR

OUT

All illustrations of the rear panel in this manual are based on the RX-V540.

The jacks in the shaded area in this illustration are not present on the RX-V440.

0103RX-V540440_09-18_EN-U.p65 02.12.20, 3:27 PM9

Connecting video components

Refer to the connection examples on the next page.

■ Types of video jacks

1 VIDEO jack

Conventional composite video signal.

2 S VIDEO jack

RX-V540

Transmits color and luminance separately and

achieves high-quality color reproduction.

3 COMPONENT VIDEO jacks

Transmit color difference (P

B, PR) and luminance

separately and provide the best quality picture.

Use the commercially available cable type specified for

connecting each jack.

• You can designate the input for the COMPONENT VIDEO A

and B jacks to suit your components by using “INPUT 1 I/O

ASSIGNMENT” on the set menu.

RX-V540

• Signals received through the S VIDEO input jacks can be

converted to composite signals in this unit and output through

its VIDEO MONITOR OUT as well.

• (With the exception of China and General models) Signals

received through the VIDEO jack on this unit can be output

through the S VIDEO MONITOR OUT jack by setting “V

CONV.” in “OPTION 1 DISPLAY SET” on the set menu to

ON.

• When the unit receives signals through both S VIDEO and

VIDEO jacks, signals input through the S VIDEO jack have

priority.

■ Connecting a video monitor

Connect the video input jack on your video monitor to the

MONITOR OUT VIDEO jack.

Note

• If you connect this unit with a source component using

Component video jacks, you also need to connect your video

monitor using Component video jacks.

■ Connecting a DVD player/digital TV/cable

Connect the optical digital audio signal output jack on

your component to the DIGITAL INPUT jack and

connect the video signal output jack on the component to

the VIDEO jack on this unit.

Note

RX-V440

• The unit has only one DIGITAL INPUT jack, for use with a

DVD player.

• Use the AUDIO jacks on this unit for a video component

which does not have optical digital output jack. However,

multi-channel reproduction cannot be obtained with audio

signals input from the AUDIO jacks.

■ Connecting a recording component

Connect the audio signal input jacks on your video

component to the AUDIO OUT jacks on this unit. Then

connect the video signal input jack on the video

component to the VIDEO OUT jack on this unit for

picture recording.

Connect the audio signal output jacks on your component

to the AUDIO IN jacks on this unit. Then connect the

video signal output jack on the component to the VIDEO

IN jack on this unit to play a source from your recording

component.

Note

• Once you have connected a recording component to this unit,

keep its power turned on while using this unit. If the power is

off, this unit may distort the sound from other components.

Only when “V CONV.” in “OPTION 1 DISPLAY SET”

is set to ON on the set menu.

Output

(MONITOR OUT)

Signal flow inside this unit

Input

CONNECTIONS

COMPONENT VIDEO

R PB Y

S VIDEOVIDEO

1 2 3

RX-V540

S VIDEO

VIDEO

COMPONENT

VIDEO

0103RX-V540440_09-18_EN-U.p65 02.12.20, 5:51 PM10

English

PREPARATION

CENTER

SUB

WOOFER

6CH INPUT OUTPUT

DIGITAL

OUTPUT

DIGITAL

INPUT

AUDIO

MD/CD-R

OPTICAL

COAXIAL

/CD-R

OUT

(REC)

(PLAY)

SURROUND

MAIN

TUNER

75Ω UNBAL.

ANT

GND

ANT

SUB

WOOFER

VIDEOAUDIO

VCR

OUT

MONITOR OUT

DVD

D-TV

/CBL

S VIDEOVIDEO

DVD

COMPORNENT VIDEO

D-TV

/CBL

MONITOR

OUT

DVD

D-TV/CBL

OPTICAL

AUDIO

OUTPUT

AUDIO

INPUT

VIDEO

INPUT

VIDEO

OUTPUT

LR LR

OPTICAL

OUTPUT

VIDEO

OUTPUT

AUDIO

OUTPUT

L R

VIDEO

OUTPUT

OPTICAL

OUTPUT

AUDIO

OUTPUT

RX-V540

VIDEO

INPUT

indicates video signal direction

indicates optical cables

indicates right analog cables

indicates left analog cables

indicates audio signal direction

Video monitorVCR

DVD player

TV/digital TV/

cable TV

CONNECTIONS

0103RX-V540440_09-18_EN-U.p65 02.12.20, 3:27 PM11

Connecting audio components

■ Connecting a CD player

Connect the coaxial digital output jack on your CD player

to the DIGITAL INPUT CD jack on this unit.

• Use the AUDIO jacks on this unit for a CD player which does

not have coaxial digital output jack.

■ Connecting a CD recorder or MD

recorder

RX-V540

Connect the optical digital signal input jack on your CD

recorder or MD recorder to the DIGITAL OUTPUT MD/

CD-R jack on this unit for digital recording.

Connect the optical digital output jack on your CD

recorder or MD recorder to the DIGITAL INPUT MD/

CD-R jack on this unit to play a source from your

recording component.

RX-V440

Connect the input jacks on your CD recorder or MD

recorder to the MD/CD-R OUT (REC) jacks for analog

recording.

Connect the output jacks on your CD recorder or MD

recorder to the MD/CD-R IN (PLAY) jacks to play a

source from your recording component.

indicates right analog cables

indicates left analog cables

indicates signal direction

CD player

• Use the AUDIO jacks on this unit for a CD recorder or MD

recorder which does not have optical digital input or output

jack.

Notes

• Once you have connected a recording component to this unit,

keep its power turned on while using this unit. If the power is

off, this unit may distort the sound from other components.

RX-V540

• The DIGITAL OUTPUT jack and analog OUT (REC) jacks

are independent. The DIGITAL OUTPUT jack only outputs

digital signals, while the OUT (REC) jacks output analog

signals only.

indicates coaxial cables

indicates optical cables

CD recorder or

MD recorder

CONNECTIONS

CENTER

SUB

WOOFER

6CH INPUT OUTPUT

SURROUND

TUNER

75Ω UNBAL.

ANT

GND

ANT

SUB

WOOFER

VIDEOAUDIO

VCR

OUT

MONITOR OUT

DVD

D-TV

/CBL

S VIDEOVIDEO

DVD

COMPORNENT VID

D-TV

/CBL

MONITOR

OUT

DVD

D-TV/CBL

OPTICAL

AUDIO

/CD-R

OUT

(REC)

(PLAY)

MAIN

DIGITAL

INPUT

COAXIAL

DIGITAL

OUTPUT

MD/CD-R

OPTICAL

INPUT

OPTICAL

OUTPUT

AUDIO

OUTPUT

AUDIO

INPUT

COAXIAL

OUTPUT

RX-V540

0103RX-V540440_09-18_EN-U.p65 02.12.20, 3:27 PM12

English

PREPARATION

■ Connecting the AM loop antenna

1 Set up the AM loop antenna, then connect it

to the terminals on this unit.

2 Press and hold the tab to insert the AM loop

antenna lead wires into the AM ANT and

GND terminals.

3 Orient the AM loop antenna for the best

reception.

Notes

• The AM loop antenna should be placed away from this unit.

• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

A properly installed outdoor antenna provides clearer

reception than an indoor one. If you experience poor

reception quality, an outdoor antenna may improve the

quality. Consult the nearest authorized YAMAHA

dealer or service center about the outdoor antennas.

FREQUENCY STEP switch (China and General

models only)

Because the inter-station frequency

spacing differs in different areas, set the

FREQUENCY STEP switch (located on

the rear panel) according to the frequency

spacing in your area.

North, Central and South America:

100 kHz/10 kHz

Other areas: 50 kHz/9 kHz

Before setting this switch, disconnect the

AC power plug of this unit from the AC

outlet.

Ground (GND terminal)

For maximum safety and minimum

interference, connect the antenna GND

terminal to a good earth ground. A good

earth ground is a metal stake driven into

moist earth.

Indoor FM

antenna

(included)

AM loop antenna

(included)

Connecting the antennas

Open the cover of the

included 75-ohm/300-ohm

antenna adapter.

Cut the external sleeve

of the 75-ohm coaxial

cable and prepare it for

connection.

Cut the lead wire and

remove it.

Insert the cable wire into the

slot, and clamp it with pliers.

Snap the cover into

place.

Unit:

mm (inch)

Lead wire

Clamp with

pliers.

Clamp

with

pliers.

Insert the wire

into the slot.

75-ohm/300-ohm antenna adapter (U.K. model only)

11 (7/16)

8 (5/16)

6 (1/14)

Both AM and FM indoor antennas are included with this

unit. In general, these antennas should provide sufficient

signal strength.

Connect each antenna correctly to the designated

terminals.

CONNECTIONS

TUNER

75Ω UNBAL.

ANT

GND

ANT

100kHz/10kHz

FREQUENCY

STEP

50kHz/9kHz

FM/AM

0103RX-V540440_09-18_EN-U.p65 02.12.20, 3:27 PM13

Connecting an external decoder

This unit is equipped with 6 additional input jacks (MAIN

left and right, CENTER, SURROUND left and right and

SUBWOOFER) for discrete multi-channel input from a

component equipped with a multi-channel decoder and 6

channel output jacks such as a DVD/SACD player.

Note

• When you select 6CH INPUT as the input source, the unit

automatically turns off the digital sound field processor, and

you cannot use DSP programs.

CONNECTIONS

DVD/SACD player

OUTPUT

SUB

WOOFER

VCR

OUT

MONITOR OUT

S VIDEOVIDEO

6CH INPUT

CENTER

SUB

WOOFER

SURROUND

MAIN

L R

SUBWOOFER MAIN

CENTER SURROUND

0103RX-V540440_09-18_EN-U.p65 02.12.20, 3:27 PM14

English

PREPARATION

Connecting the speakers

■ Speakers

This unit has been designed to provide the best sound-

field quality with a 6-speaker system, using main left and

right speakers, rear left and right speakers, a center

speaker, and a rear center speaker. If you use different

brands of speakers (with different tonal qualities) in your

system, the tone of a moving human voice and other types

of sound may not shift smoothly. We recommend that you

use speakers from the same manufacturer or speakers

with the same tonal quality.

The main speakers are used for the main source sound

plus effect sounds. They will probably be the speakers

from your present stereo system. The rear speakers are

used for effect and surround sounds. The center speaker is

for the center sounds (dialog, vocals, etc.). The rear center

speaker supplements the rear (left and right) speakers and

provides for more realistic front-to-back transitions.

The main speakers should be high-performance models

and have enough power-handling capacity to accept the

maximum output of your audio system. The other

speakers do not have to be equal to the main speakers. For

precise sound localization, however, it is ideal to use the

models of equivalent performance with the main

speakers.

Use of a subwoofer expands your sound field

It is also possible to further expand your system with the

addition of a subwoofer. The use of a subwoofer is

effective not only for reinforcing bass frequencies from

any or all channels, but also for reproducing the LFE

(low-frequency effect) channel with high fidelity when

playing back Dolby Digital or DTS signals. The

YAMAHA Active Servo Processing Subwoofer System is

ideal for natural and lively bass reproduction.

Main

speaker (L)

1.8 m (6 feet)

Rear speaker (L)

Rear center

speaker

Rear speaker (R)

Subwoofer

Main speaker (R)

Center speaker

CONNECTIONS

■ Speaker placement

Refer to the following diagram when you place the

speakers.

Main speakers

Place the main left and right speakers an equal distance

from the ideal listening position. The distance between

each speaker and each side of the video monitor should

also be the same.

Center speaker

Align the front face of the center speaker with the front

face of your video monitor. Place the speaker as close to

the monitor as possible (such as directly over or under the

monitor) and centrally between the main speakers.

Rear speakers

Place these speakers behind your listening position,

facing slightly inwards, about 1.8 m (6 feet) above the

floor.

Rear center speaker

Place the rear center speaker in the center between the

rear left and right speakers at the same height from the

floor as the rear speakers.

Subwoofer

The position of the subwoofer is not so critical, because

low bass sounds are not highly directional. However, it is

better to place the subwoofer near the main speakers.

Turn it slightly toward the center of the room to reduce

wall reflections.

Note

• If you do not use any of effect speakers (rear, center and/or

rear center), change the settings of “SOUND 1 SPEAKER

SET” items at the set menu to direct signals to other terminals

you have connected speakers to.

CAUTION

Use magnetically shielded speakers. If these speakers

still create interference with the monitor, place the

speakers away from the monitor.

0103RX-V540440_09-18_EN-U.p65 02.12.20, 3:27 PM15

10 mm (3/8”)

Red: positive (+)

Black: negative (–)

Banana plug

CONNECTIONS

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

4ΩMIN.

8ΩMIN.

6ΩMIN.

/SPEAKER

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

8ΩMIN.

16ΩMIN.

8ΩMIN.

/SPEAKER

■ IMPEDANCE SELECTOR switch

WARNING

Do not change setting of the IMPEDANCE SELECTOR switch when the unit power is switched on, as doing so may

damage the unit. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the

IMPEDANCE SELECTOR switch may not be fully slid to either position. If this is the case, slide the switch all the

way to either position when this unit is in standby mode. Be sure to move this switch only when this unit is in

standby mode.

Select the switch position (left or right) according to the impedance of the speakers in your system.

■ Connections

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) in accordance with the markers on

this unit, the speakers, and the speaker cables. If the connections are faulty, no sound will be heard from the speakers,

and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

CAUTION

• Use speakers with the specified impedance shown on the rear panel of this unit.

• Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/

or the speakers.

A speaker cord is actually a pair of insulated cables

running side by side. One cable is colored or shaped

differently, perhaps with a stripe, groove or ridge.

1 Remove approximately 10 mm (3/8”) of

insulation from each of the speaker cables.

2 Twist the exposed wires of the cable

together to prevent short circuits.

3 Unscrew the knob.

4 Insert one bare wire into the hole in the side

of each terminal.

5 Tighten the knob to secure the wire.

(With the exception of U.K. and Europe models)

• You can also use banana plug connectors. First, tighten the

knob and then insert the banana plug connector into the end of

the corresponding terminal.

(With the exception of U.K. and Europe models)

Switch

position

Left

Right

Speaker

Main

Center,

Rear Center,

Rear

Main*

Center,

Rear Center,

Rear

Impedance level

If you use one/two set(s) of main speakers, the impedance of

each speaker must be 4 Ω/8 Ω or higher.

The impedance of each speaker must be 6 Ω or higher.

If you use one/two set(s) of main speakers, the impedance of

each speaker must be 8 Ω/16 Ω or higher.

The impedance of each speaker must be 8 Ω or higher.

* [Canada model only]

When the switch is set to right, you cannot use “A+B”.

IMPEDANCE SELECTOR

switch

(General model)

0103RX-V540440_09-18_EN-U.p65 02.12.20, 3:27 PM16

English

PREPARATION

Subwoofer

system

Rear center

speakerMain B speaker

Center

speaker

Right

Rear speaker

SUBWOOFER jack

When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System,

connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the

main, center and/or rear channels to this jack in accordance with your SPEAKER SET selections. The LFE (low-

frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance

with your SPEAKER SET selections.

Notes

• The cut-off frequency of the SUBWOOFER jack is 90 Hz.

• If you do not use a subwoofer, allocate the signals to the main left and right speakers by changing the setting of “SOUND 1

SPEAKER SET” item “1E BASS” on the set menu to MAIN.

• Use the control on the subwoofer to adjust its volume level. You can also adjust the volume level by using this unit’s remote control

(see “SETTING THE SPEAKER LEVELS” on page 48).

Right Left

Main A speaker

Right Left Left

MAIN SPEAKERS terminals

You can connect up to two speaker systems to these

terminals. When using only one speaker system, connect

it to either of the MAIN A or the MAIN B terminals.

REAR SPEAKERS terminals

A rear speaker system can be connected to these

terminals.

CENTER SPEAKER terminals

A center speaker can be connected to these terminals.

REAR CENTER SPEAKER terminals

A rear center speaker can be connected to these terminals.

CONNECTIONS

The diagram shows the speaker layout in the listening

room.

CENTER

SUB

WOOFER

6CH INPUT

DIGITAL

OUTPUT

DIGITAL

INPUT

VIDEOAUDIOAUDIO

MD/CD-R

DVD

D-TV/CBL

OPTICAL

COAXIAL

VCR

OUT

MONITOR OUT

DVD

D-TV

/CBL

/CD-R

OUT

(REC)

(PLAY)

SURROUND

MAIN

S VIDEOVIDEO

TUNER

75Ω UNBAL.

ANT

GND

ANT

DVD

B Y

COMPORNENT VIDEO

D-TV

/CBL

MONITOR

OUT

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

4ΩMIN.

8ΩMIN.

6ΩMIN.

/SPEAKER

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

8ΩMIN.

16ΩMIN.

8ΩMIN.

/SPEAKER

OUTPUT

SUB

WOOFER

MAIN

CENTER

R L

SPEAKERS

REAR

(SURROUND)

REAR

CENTER

R L

432

0103RX-V540440_09-18_EN-U.p65 02.12.20, 3:28 PM17

Connecting the power supply

cords

■ Connecting the AC power cord

Plug in this unit to a wall outlet.

■ AC OUTLETS (SWITCHED)

U.S.A., Canada, China, Europe, Singapore and

General models ..............................................2 OUTLETS

U.K. and Australia model ................................ 1 OUTLET

Use these outlets to connect the power cords from your

components to this unit. The power to the AC OUTLETS

is controlled by this unit’s STANDBY/ON (or SYSTEM

POWER and STANDBY). These outlets will supply

power to any source component connected to this unit

whenever this unit is turned on. The maximum power

(total power consumption of components) that can be

connected to the AC OUTLETS varies depending on the

area which it was purchasing.

China and General models......................................... 50 W

Other models ........................................................... 100 W

■ VOLTAGE SELECTOR

(China and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit

must be set for your local main voltage BEFORE

plugging into the AC main supply. Voltages are 110/120/

220/240 V AC, 50/60 Hz.

VOLTAGE SELECTOR

Turning on the power

When all connections are complete, turn on the power of

this unit.

1 Press STANDBY/ON (SYSTEM POWER on

the remote control) to turn on the power of

this unit.

The level of the main volume, and then the current

DSP program name appear on the front panel

display.

Remote control

Front panel

(General model)

CONNECTIONS

REAR

CENTER

AC OUTLETS

SWITCHED

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

4ΩMIN.

8ΩMIN.

6ΩMIN.

/SPEAKER

IMPEDANCE SELECTOR

SET BEFORE POWER ON

MAIN

CENTER

REAR CENTER

REAR

A OR B :

A+B :

8ΩMIN.

16ΩMIN.

8ΩMIN.

/SPEAKER

VOLTAGE

SELECTOR

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

POWER

SLEEP

CODE SET

STANDBY

TRANSMIT

6CH INPUT

SYSTEM

AUX

TV/CBL

TV INPUT

TV MUTE

VOLUME

MUTE

AMP

POWER POWER

AVTV

VCR

DVD

MD/CD-R TUNERCD

–

TV CHTV VOL

STANDBY

/ON

POWER

SYSTEM

0103RX-V540440_09-18_EN-U.p65 02.12.20, 5:52 PM18

English

PREPARATION

Using the basic menu

Use the remote control to make adjustments.

• Press SPEAKERS A or B on the front panel to select

the main speakers you want to use.

• Make sure you disconnect headphones from this unit.

1 Press AMP.

2 Press SET MENU.

“BASIC MENU” appears on the front panel display,

as shown here.

If the front panel display

changes to show anything

other than “BASIC MENU”,

press u until it displays

“BASIC MENU”.

3 Press j / i to enter into the BASIC menu.

The front panel display changes as shown here:

BASIC SYSTEM SETTINGS

The “BASIC” menu allows you to set some of the basic “SOUND” menu parameters with a minimum of effort. If you

wish to configure the unit more precisely to suit your listening environment, use the more detailed parameters from the

“SOUND” menu instead of those under the “BASIC” menu (See page 39). Altering any parameters in the BASIC menu

will reset all parameters in the “SOUND” menu.

SET MENU

SELECT

PRESET/CH

TV INPUT

TV MUTE

A/B/C/D/E

VOLUME

LEVEL

TEST

STEREO

EFFECT

RETURN

DISPLAY

TITLE

MUTE

AMP

VCR

–

TV CHTV VOL

–

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

4,7

3,5

SET MENU

A/B/C/D/E

SELECT

PRESET/CH

–

4 Press u / d to change the display to the

setting you want to alter.

SETUP

Changes the speaker and amplifier settings to suit the

size of the room you are using. Refer to “Setting the

unit to match your speaker system” for more

information.

SP LEVEL

Adjusts the output levels of the speakers.

Refer to “Setting speaker output levels” for more

information.

5 Press j / i to enter the desired setting mode.

6 Change the unit settings to suit your

listening environment. When you have

finished, the unit will automatically return to

the basic menu.

7 Press u / d to exit from the set menu.

The front panel display changes in the following

order:

BASIC MENU

SELECT

PRESET/CH

–

1 SETUP

SELECT

PRESET/CH

–

↑

BASIC

↓↑

SOUND

↓↑

INPUT

↓↑

OPTION

↓

Exit

AMP

0104RX-V540440_19-21_EN-U.p65 02.12.20, 3:28 PM19

SET MENU

BASIC SOUND INPUT OPTION

1 SETUP

Press j / i to alter the settings for each

parameter. Use d to move to the next

setting.

2 SP LEVEL

Press j / i to adjust the balance

between each speaker and the left main

speaker. Use d to move to the next

setting.

1 ROOM

Choose from S/M/L.

2 SUBWOOFER

Choose either of YES/NONE.

3 SPEAKERS

Choose from 2/3/4/5/6 spk.

4 SET/CANCEL

Choose either of SET/CANCEL.

5 CHECK OK:

Choose either of YES/NO.

1 L-R

Adjust the balance between the main

left and right speakers.

2 C

Adjust the balance between the main

left and center speakers.

3 RL

Adjust the balance between the main

left and rear left speakers.

4 RC

Adjust the balance between the rear

left and rear center speakers.

5 RR

Adjust the balance between the rear

left and rear right speakers.

SET

BASIC SYSTEM SETTINGS

YES

CANCEL

• After altering the “1 SETUP” parameters, readjust the output levels of the speakers at “2 SP LEVEL”.

• See pages 38 – 44 for a detailed explanation of the “SOUND”, “INPUT” and “OPTION” menus.

6 SWFR

Adjust the balance between the main

left speaker and the subwoofer.

0104RX-V540440_19-21_EN-U.p65 02.12.20, 3:28 PM20

English

PREPARATION

Setting the unit to match your

speaker system

Follow the instructions below to set the amplifier output

to match the size of your room and speakers. Press u / d

to cycle through parameters 1 through 4, and j / i to alter

the parameter setting.

Factory default settings are highlighted.

1 ROOM

Settings: S, M, L

Select the size of the room you have installed your

speakers in. Roughly speaking, the room sizes are

defined as follows:

[U.S.A. and Canada models]

S: 16ft. x 3ft., 200sq.ft. (4.8 x 4m, 20m

)

M: 20ft. x 16ft., 300sq.ft. (6.3 x 5.0m, 30m

)

L: 26ft. x 19ft., 450sq.ft. (7.9 x 5.8m, 45m

)

[Other models]

S: 3.6m x 2.8m, 10m

M: 4.8m x 4.0m, 20m

L: 6.3m x 5.0m, 30m

2 SUBWOOFER

Settings: YES, NONE

Select YES if you have a subwoofer in your system,

or NONE if you do not.

3 SPEAKERS

Settings: 2, 3, 4, 5, 6 (spk)

Select the number of speakers you wish to use in your

speaker configuration. This number does not include

your subwoofer.

BASIC SYSTEM SETTINGS

4 SET or CANCEL

Select SET to confirm the changes you made to the

above three settings. The unit will output a test tone to

the speakers (see

). Alternatively, select CANCEL

to exit this menu without altering any of the unit

settings.

5 Use the test tone to check the speaker levels.

When you select SET in

, the display changes to

“CHECK: TestTone”, and the unit outputs a test tone

to each of the speakers in turn. When the test tone

begins, the display changes to “CHECK OK: YES”.

If the volume of the test tone varies between speakers,

press j / i to change the display to “NO”. The unit

will automatically enter the “2 SP LEVEL” mode.

If the test tone is output at the same volume from all

of the speakers, select “CHECK OK: YES”. The unit

will exit from the SETUP menu.

Notes

• The unit cycles the test tone around each of the speakers in

turn twice.

• The indicator of the speaker currently outputting the test tone

flashes on the front panel display.

Setting speaker output levels

(SP LEVEL)

Use this menu to compare and adjust the test tone output

from each speaker to the output from the left main (or left

rear) speaker so that the volume level for all speakers is

identical. Press u / d to select a speaker, then adjust the

balance using j / i.

Note

• The unit outputs the test tone from the selected speaker and

the left main (or left rear) speaker in turn. The indicator of the

speaker currently outputting the test tone flashes on the front

panel display.

1 L-R

Adjusts the balance between the main left and right

speakers.

2 C

Adjusts the balance between the main left and center

speakers.

3 RL

Adjusts the balance between the main left and rear

left speakers.

4 RC

Adjusts the balance between the rear left and rear

center speakers.

5 RR

Adjusts the balance between the rear left and rear

right speakers.

6 SWFR

Adjust the balance between the main left speaker and

the subwoofer.

Setting

2spk

3spk

4spk

5spk

6spk

Display

L R

L C R

L R

RL RR

L C R

RL RR

L C R

RL RC RR

Speaker

Main L/Main R

Main L/Center/Main R

Main L/Main R/Rear L/

Rear R

Main L/Center/Main R/

Rear L/Rear R

Main L/Center/Main R/

Rear L/Rear Center/Rear R

0104RX-V540440_19-21_EN-U.p65 02.12.20, 3:28 PM21

PLAYBACK

1 Press STANDBY/ON (SYSTEM POWER on

the remote control) to turn on the power.

2 Turn on the video monitor connected to this

unit.

3 Press SPEAKERS A or B

to select the main

speakers you want to use.

If you are using two sets of

main speakers, press both A

and B.

4 Rotate the INPUT selector (or press one of

the input selector buttons on the remote

control) to select the input source.

The selected input source name and input mode

appear on the front panel display for a few seconds.

To select the audio source connected to the 6CH

INPUT jacks

• Select the input to which the video source component is

connected before selecting an audio source.

Press 6CH INPUT until “6CH INPUT” appears on the

front panel display.

Note

• If “6CH INPUT” is shown on the front panel display, no other

source can be played. To select another input source, first

press 6CH INPUT so that “6CH INPUT” disappears from the

front panel display.

STANDBY

/ON

POWER

SYSTEM

Remote control

Front panel

Selected input source

6CH INPUT

Remote control

Front panel

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

POWER

SLEEP

CODE SET

STANDBY

TRANSMIT

6CH INPUT

SYSTEM

AUX

TV/CBL

TV INPUT

TV MUTE

VOLUME

STEREO

EFFECT

MUTE

AMP

POWER POWER

AVTV

VCR

DVD

MD/CD-R TUNERCD

–

TV CHTV VOL

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

SPEAKERS

INPUT

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

VOLUME

L R

DVD AUTO

AUX

TV/CBL

VCR

VCR2/DVR

DVD

MD/CD-R TUNERCD

0105RX-V540440_22-27_EN-U.p65 02.12.20, 3:28 PM22

English

BASIC

OPERATION

■ BGV (background video) function

The BGV function allows you to view images from a

video source together with sounds from an audio source.

For example, you can enjoy listening to classical music

while watching beautiful scenery from a video source on

the video monitor.

Select a source from the video group, then select a source

from the audio group using the input selector buttons on

the remote control.

■ To mute the sound

Press MUTE on the

remote control.

To resume audio output, press

MUTE again.

• You can change the amount by which the unit reduces the

volume in “OPTION 3 AUDIO MUTE” in the set menu.

• You can also cancel mute by pressing VOLUME +/–, etc.

• During muting, the MUTE indicator flashes on the front panel

display.

■ Night listening mode

This mode reproduces dialogue clearly while reducing the

volume of loud sound effects for easier listening at low

volumes or at night.

Press NIGHT on the

remote control.

Press NIGHT once more to

return to normal reproduction.

Note

• Setting the unit in standby mode cancels night listening mode.

• You can use night listening mode with any of the sound field

programs.

• The NIGHT indicator on the front panel display lights when

the unit is in night listening mode.

• Night listening mode may vary in effectiveness depending on

the input source and surround sound settings you use.

■ When you have finished using this unit

Press STANDBY/ON (STANDBY on the

remote control) to set this unit in standby

mode.

5 Start playback or select a broadcast station

on the source component.

Refer to the operation instructions for the

component.

6 Adjust the volume to the desired level.

The volume level is displayed digitally.

Example: –70 dB

Control range: VOLUME MUTE (minimum) to

0 dB (maximum)

The volume level indicator also shows the current

volume level as a bar graph.

If desired, use CONTROL and BASS/TREBLE –/+.

These controls only effect the sound from the main

speakers.

Notes

• If you increase or decrease the high-frequency or the low-

frequency sound to an extreme level, the tonal quality from the

center and rear speakers may not match that of the main left

and right speakers.

• If you have connected a recording component to the VCR

OUT, or MD/CD-R OUT jacks, and you notice distortion or

low volume during playback from other components, try

turning the recording component on.

7 Select a DSP program if desired.

Use PROGRAM l / h (DSP program buttons on

the remote control) to select a DSP program. See

pages 28 – 30 for details about DSP programs.

When using the remote control, press AMP before

selecting a DSP program.

VOLUME

Front panel

Remote control

Front panel Remote control

STANDBY

/ON

STANDBY

Front panel

Remote control

MUTE

VOLUME

–

PROGRAM

STEREO

EFFECT

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

AUX

TV/CBL

VCR

VCR2/DVR

DVD

MD/CD-R TUNERCD

PLAYBACK

BASS/TREBLE

CONTROL

NIGHT

Front panel

0105RX-V540440_22-27_EN-U.p65 02.12.20, 3:28 PM23

Input modes and indications

This unit is equipped with a variety of input jacks. You

can select the type of input signals you wish to use.

Each time you turn on the unit power, the input mode is

set to the “INPUT 2 INPUT MODE” setting defined in

the set menu.

Press INPUT MODE repeatedly until the

desired input mode is shown on the front

panel display.

AUTO: In this mode, the input signal is selected

automatically as follows:

1) Digital signal

2) Analog signal

DTS: In this mode, only digital input signals

encoded with DTS are selected, even if the

unit is receiving another signal

simultaneously.

ANALOG: In this mode, only analog input signals are

selected, even the unit is receiving digital

signals at the same time.

Notes

• When AUTO is selected, this unit automatically determines

the type of signal. If it detects a Dolby Digital or DTS signal,

the decoder automatically switches to the appropriate setting.

• When playing a disc encoded with Dolby Digital or DTS on

some LD or DVD players, there is a delay in sound output for

a moment when playback resumes after a search, because the

unit must select the digital signal again.

• When playing a LD source that has not been digitally

recorded, the unit may not output any sound for some LD

players. In this case, set the input mode to ANALOG.

Front panel

Input mode

■ Notes on digital signals

The digital input jacks of this unit can handle 96 kHz

sampling digital signals. Note the following when a

digital signal with a sampling frequency greater than 48

kHz is input to this unit:

• You cannot use any DSP programs.

• The unit will output sound as 2-channel stereo from the

main left and right speakers only. Therefore, you

cannot adjust the level of the effect speakers while

listening to such a source.

■ Notes on playing DTS-CD/LDs

• If the digital output data of the player has been

processed in any way, the unit may not be able to

perform DTS decoding even if there is a digital

connection between this unit and the player.

• If you play a source encoded with a DTS signal and set

the input mode to ANALOG, the unit may reproduce

the noise of an unprocessed DTS signal. In this case,

connect the source to a digital input jack on this unit

and set the input mode to AUTO or DTS.

• If you switch the input mode to ANALOG while

playing a source encoded with a DTS signal, the unit

does not output any sound.

• If you play a source encoded with a DTS signal with

the input mode set to AUTO;

– The unit automatically switches to the DTS-

decoding mode (The “t” indicator lights up)

after detecting the DTS signal. When playback of

the DTS source is completed, the “t” indicator

may flash. While this indicator is flashing, the unit

can only reproduce DTS source. If you want to play

a normal PCM source immediately, change the input

mode back to AUTO.

– When the input mode is set to AUTO and a search

or skip operation is performed during playback of a

DTS source, the “t” indicator may flash. If this

state continues for longer than 30 seconds, the unit

will automatically switch from “DTS-decoding”

mode to PCM digital signal input mode. The “t”

indicator will turn off.

PLAYBACK

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

VOLUME

L R

DVD AUTO

INPUT MODE

0105RX-V540440_22-27_EN-U.p65 02.12.20, 3:28 PM24

English

BASIC

OPERATION

Selecting a sound field program

You can enhance your listening experience by selecting a

DSP program. For details about each program, see pages

28 – 30.

1 Press AMP.

2 Press one of the numeric buttons on the

remote control to select the desired

program.

The name of the selected program appears on the

front panel display.

AMP

3 After selecting the desired program, press

the same button repeatedly to cycle through

sub-programs if available.

Example: Pressing MOVIE THEATER 2

repeatedly switches the sub-program

between “Adventure” and

“General”.

Notes

• There are 9 programs with sub-programs available with this

unit. However, the selection depends on the input signal

format and not all sub-programs can be used with all input

signal formats.

• You cannot use the digital sound field processor with a source

connected to the 6CH INPUT jacks of this unit or when the

unit is reproducing a digital source with a sampling frequency

greater than 48 kHz.

• The acoustics of your listening room affect the DSP program.

Minimize the sound reflections in your room to maximize the

effect created by the program.

• When you select an input source, this unit automatically

selects the last DSP program used with that source.

• When you set this unit in standby mode, it stores the current

source and DSP program in memory and automatically selects

them when you turn on the power again.

• If the unit receives a Dolby Digital or DTS signal when the

input mode is set to AUTO, the DSP program (No. 7–9)

automatically switches to the appropriate decoding program.

• When the unit is reproducing a monaural source with PRO

LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie,

no sound is output from the main and rear speakers. Sound can

only be heard from the center speaker. (If “1A CENTER” on

the set menu is set to NON, the center channel sound is output

from the main speakers.)

• You can also select DSP program by pressing PROGRAM

l / h on the front panel.

• Select a program based on your listening preference. Program

names are just for reference.

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

PROGRAM l / h

POWER

SLEEP

CODE SET

STANDBY

TRANSMIT

6CH INPUT

SYSTEM

AUX

TV/CBL

TV INPUT

TV MUTE

VOLUME

STEREO

EFFECT

MUTE

AMP

POWER POWER

AVTV

VCR 1

DVD

MD/CD-R TUNERCD

–

TV CHTV VOL

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

2,3

STEREO

EFFECT

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

STEREO

EFFECT

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

PLAYBACK

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

VOLUME

L C R

RLLFE RR

Adventure

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

VOLUME

L C R

RLLFE RR

General

0105RX-V540440_22-27_EN-U.p65 02.12.20, 3:28 PM25

■ Selecting PRO LOGIC, PRO LOGIC II or

Neo:6

You can listen to 2-channel sources decoded into five or

six discrete channels by selecting PRO LOGIC, PRO

LOGIC II or Neo:6 in program No. 9.

1 Select a 2-channel source and start playback

on the source component.

2 Press AMP.

3 Press q/DTS SUR.

AMP

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

PROGRAM l / h

POWER

SLEEP

CODE SET

STANDBY

TRANSMIT

6CH INPUT

SYSTEM

AUX

TV/CBL

TV INPUT

TV MUTE

VOLUME

STEREO

EFFECT

MUTE

AMP

POWER POWER

AVTV

VCR

DVD

MD/CD-R TUNERCD

–

TV CHTV VOL

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

STEREO

EFFECT

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

6.1/5.1

+10

(Example)

PLAYBACK

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

MATRIX

VOLUME

L C R

RLLFE RR

Matrix 6.1

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

VOLUME

L R

PRO LOGIC

The display cycles as follows each time you press q/

DTS SUR :

PRO LOGIC→PRO LOGIC Enhanced→PRO LOGIC II

Movie→PRO LOGIC II Music→Neo:6 Cinema→Neo:6

Music→PRO LOGIC→....

• You can select PRO LOGIC, PRO LOGIC Enhanced, PRO

LOGIC II Movie, PRO LOGIC II Music, Neo:6 Cinema, and

Neo:6 Music by pressing PROGRAM l / h on the front

panel repeatedly.

■ Playing Dolby Digital EX or DTS ES

material

Press 6.1/5.1 to turn on the Dolby Digital EX or DTS ES

decoder to listen to Dolby Digital EX and DTS ES

material with a rear center speaker.

Press 6.1/5.1 to choose the playback mode. (The modes

you can select vary depending on the format of the

material you are playing.)

AUTO: This mode automatically switches to Dolby

Digital EX/DTS ES Matrix 6.1/DTS ES

Discrete 6.1 depending on the signal in the

input source that the unit detects. The rear

center speaker does not output sound for 5.1

channel sources.

Discrete 6.1: This mode can only be selected only when

the unit detects a source encoded with the

DTS ES Discrete format. (The DISCRETE

indicator lights up.)

Matrix 6.1: This mode allows for 6-channel playback of

the input source through the Matrix 6.1

decoder. (Either

or MATRIX

indicator lights up.)

OFF: The rear center speaker does not output

sound in this mode.

Notes

• Some 6.1-channel compatible discs do not have a signal (flag)

that this unit can automatically detect. Select “Matrix 6.1” to

play these kinds of discs with 6.1-channel sound.

• 6.1-channel playback is not possible even if you press 6.1/5.1

in the following cases:

1 When “1C REAR LR” is set to NON.

2 When effects are turned off.

3 When the source connected to the 6CH INPUT jack is

being played.

4 When the unit is reproducing a Dolby Digital KARAOKE

source.

5 When headphones are connected to the PHONES jack.

• The input mode resets to AUTO when you turn the unit power

off.

0105RX-V540440_22-27_EN-U.p65 02.12.20, 3:28 PM26

English

BASIC

OPERATION

STEREO

EFFECT

ENTER

Front panel

Remote control

SELECT

PRESET/CH

–

EFFECT

STEREO

PLAYBACK

■ Virtual CINEMA DSP

With Virtual CINEMA DSP, you can enjoy all DSP

programs without rear speakers. It creates virtual speakers

to reproduce a natural sound field.

You can listen to virtual CINEMA DSP by setting “1C

REAR LR” in the set menu to NON. Sound field

processing changes to VIRTUAL CINEMA DSP

automatically.

Note

• This unit is not set in the virtual CINEMA DSP mode even if

“1C REAR LR” is set to NON in the following cases:

– when the 6ch Stereo, DOLBY DIGITAL, Pro Logic, Pro

Logic II, or DTS program is selected;

– when the sound effect is turned off;

– when 6CH INPUT is selected as the input source;

– when a digital signal with a sampling frequency greater

than 48 kHz is input to this unit;

– when using the test tone; or

– when connecting the headphones.

■ SILENT CINEMA DSP

You can enjoy a powerful sound field similar to what you

could expect from actual speakers through headphones,

with SILENT CINEMA DSP. You can listen to SILENT

CINEMA DSP by connecting your headphones to the

PHONES jack while the digital sound field processor is

on. The “SILENT” indicator lights up on the front panel

display. (When sound effects are off, the unit reproduces

the source in normal stereo.)

Notes

• This feature is not available when 6CH INPUT is selected or

the unit is receiving a digital signal with a sampling frequency

greater than 48 kHz.

• The sound from the LFE channel will be mixed and output

from the headphones.

■ Normal stereo reproduction

Press STEREO/EFFECT to turn off the sound

effect for normal stereo reproduction.

Press STEREO/EFFECT again to turn the sound

effect back on.

Notes

• If you turn off the sound effects, no sound is output from the

center speaker, rear speakers, or rear center speaker.

• If you turn off the sound effects while the unit is reproducing

sound from a Dolby Digital or DTS signal, the dynamic range

of the signal is automatically compressed and the unit will

output mix the sounds of the center and rear speaker channels

and output them from the main speakers.

• The volume may be greatly reduced when you turn off the

sound effects or if you set “SOUND 4 D. RANGE (dynamic

range)” on the set menu to MIN. In this case turn on the sound

effect.

• During stereo reproduction, you can display information such

as the type, format and sampling frequency of the signal input

from the components connected to this unit.

(While playing a source)

1 Press AMP.

2 Press d to display the information about the

input signal.

(Format): The display shows the signal format. When the

unit cannot detect a digital signal it

automatically switches to analog input.

in: The display shows the number of input signal

source channels, as follows: For multi-channel

soundtrack such as front 3 channels, rear 2

channels and LFE, the display shows “3/2/

LFE”.

For bilingual broadcasts where the signal is

split into 2 channels, the display shows “1+1”.

For signals with more than 3 channels the

display shows “MLT”.

fs: The display shows the sampling frequency.

When the unit is unable to detect the sampling

frequency “Unknown” shows in the front panel

display.

rate: The display shows the bit rate. When the unit is

unable to detect the bit rate “Unknown” shows

in the front panel display.

flg: The display shows the flag - data encoded in a

DTS or Dolby Digital signal that causes this

unit to automatically switch to the appropriate

decoder for playback.

0105RX-V540440_22-27_EN-U.p65 02.12.20, 3:28 PM27

DIGITAL SOUND FIELD PROCESSING (DSP)

Understanding sound fields

A sound field is defined as the “characteristic sound reflections of a

particular space.” In concert halls and other music venues, we hear

early reflections and reverberations as well as the direct sound

produced by the artist(s). The variations in the early reflections and

other reverberations among the different music venues is what gives

each venue its special and recognizable sound quality.

YAMAHA sent teams of sound engineers all around the world to

measure the sound reflections of famous concert halls and music

venues, and collect detailed sound field information such as the

direction, strength, range, and delay time of those reflections. Then

we stored this enormous amount of data in the ROM chips of this

unit.

■ Recreating a sound field

Recreating the sound field of a concert hall or an opera house requires localizing the virtual sound sources in your

listening room. The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound

field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data.

The processor controls the strength and delay time of the signals output from the four effect speakers to localize the

virtual sound sources and fully encompass the listener.

Hi-Fi DSP programs

The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in

mind that most of these are precise digital recreations of actual acoustic environments.

No.

Program

CONCERT HALL

JAZZ CLUB

ROCK CONCERT

ENTERTAINMENT/

Disco

ENTERTAINMENT/

6ch Stereo

Features

A large round concert hall with a rich surround effect. Pronounced reflections from all directions

emphasize the extension of sounds. The sound field has a great deal of presence, and your virtual

seat is near the center, close to the stage.

This is the sound field at stage front in “The Bottom Line”, a famous New York jazz club, that

seats up to 300 people. Its wide left to right seating arrangement offers a real and vibrant sound.

The ideal program for lively, dynamic rock music. The data for this program was recorded at LA’s

“hottest” rock club. The listener’s virtual seat is at the center-left of the hall.

This program recreates the acoustic environment of a lively disco in the heart of a big city. The

sound is dense and highly concentrated. It is also characterized by a high-energy, “immediate”

sound.

Using this program increases the listening position range. This is a sound field suitable for

background music at parties, etc.

0106RX-V540440_28-31_EN-U.p65 02.12.20, 5:52 PM28

English

BASIC

OPERATION

CINEMA-DSP

Sound design of CINEMA-DSP

Filmmakers intend for the dialog to be located right on the screen, the effect sound a little farther back, the music spread

even farther back, and the surround sound around the listener. Of course, all of these sounds must be synchronized with

the images on the screen.

CINEMA-DSP is an upgraded version of YAMAHA DSP specially designed for movie soundtracks. CINEMA-DSP

integrates the DTS, Dolby Digital, and Dolby Pro Logic surround sound technologies with YAMAHA DSP sound field

programs to provide a surround sound field. It recreates comprehensive movie sound design in your audio room. In

CINEMA-DSP sound field programs, YAMAHA’s exclusive DSP processing is added to the Main left and right, and

Center channels, so the listener can enjoy realistic dialogue, depth of sound, smooth transition between sound sources,

and a surround sound field that goes beyond the screen.

When a DTS or Dolby Digital signal is detected, the CINEMA-DSP sound field processor automatically chooses the

most suitable sound field program for that signal.

L SURROUND SOUND FIELD

R SURROUND SOUND FIELD

PRESENCE SOUND FIELD

DIALOG

EFFECT MUSIC

In addition to the DSP, this unit is equipped with a variety of precise decoders; Dolby Pro Logic decoder for Dolby

Surround sources, Dolby Pro Logic II decoder for Dolby Surround and 2-channel sources, Dolby Digital/DTS decoder

for multi-channel sources and Dolby Digital EX or DTS-ES decoder for adding a rear center channel. You can select

CINEMA-DSP programs to optimize these decoders and the DSP sound patterns depending on the input source.

CINEMA-DSP Programs

The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in

mind that most of these are precise digital recreations of actual acoustic environments. Select the DSP program that you

feel sounds best regardless of the name and description given for it below.

■ For audio-video sources: No. 4 to 6

No.

Program

ENTERTAINMENT/

Game

MUSIC VIDEO

TV THEATER/

Mono Movie

TV THEATER/Variety/

Sports

Features

This program adds a deep and spatial feeling to video game sounds.

This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an

actual jazz or rock concert.

This program is provided for reproducing monaural video sources (such as old movies). The

program produces the optimum reverberation to create sound depth using only the presence sound

field.

Though the presence sound field is relatively narrow, the surround sound field employs the sound

environment of a large concert hall. This effect enhances the experience of watching various TV

programs such as news, variety shows, music programs or sports programs.

0106RX-V540440_28-31_EN-U.p65 02.12.20, 3:29 PM29

■ For movie programs

No.

Features

This program creates the extremely wide sound field of a 70-mm movie theater. It

precisely reproduces the source sound in detail, making both the video and the sound field

incredibly real. This is ideal for any kind of video source encoded with Dolby Surround,

Dolby Digital or DTS (especially large-scale movie productions).

This program clearly reproduces dialog and sound effects in the latest sound form of

science fiction films, thus creating a broad and expansive cinematic space amid the

silence. You can enjoy science fiction films in a virtual-space sound field that includes

Dolby Surround, Dolby Digital and DTS-encoded software employing the most advanced

techniques.

This program is ideal for precisely reproducing the sound design of the newest 70-mm and

multichannel soundtrack films. The sound field is made to be similar to that of the newest

movie theaters, so the reverberations of the sound field itself are restrained as much as

possible.

This program is for reproducing sounds from 70-mm and multichannel soundtrack films,

and is characterized by a soft and extensive sound field. The presence sound field is

relatively narrow. It spatially spreads all around and toward the screen, restraining the

echo effect of conversations without losing clarity.

The built-in decoder reproduces source sounds and sound-effects precisely.

No DSP effect is applied in this program.

This program ideally simulates the multi-surround speaker systems of the 35-mm film

theaters. Dolby Pro Logic decoding, Dolby Digital decoding or DTS decoding and digital

sound field processing create precise effects without altering the original sound orienta-

tion.

The surround effects produced by this sound field wrap around the viewer naturally from

the back to the left and right, and toward the screen.

MOVIE

THEATER 1

MOVIE

THEATER 2

Spectacle

Sci-Fi

Adventure

General

Program

Straight Decode

Enhanced Mode

CINEMA-DSP

Straight Decode

This unit is equipped with various precise decoders;

• Dolby Digital/DTS decoder for multi-channel reproduction of the original sound

• Dolby Digital EX/DTS ES decoder for an additional rear center channel

• Dolby Pro Logic/Pro Logic II/DTS Neo:6 decoder for multi-channel reproduction of 2-channel sources

Select any of the STRAIGHT DECODE modes in Program 9 (except for the sub-program “Enhanced.”) to use any of

these decoders for reproducing the original sound without any sound effects added. In this case, no DSP effect is applied

and the DSP indicator turns off.

Note

• When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, and the main

and rear speakers output effect sounds.

0106RX-V540440_28-31_EN-U.p65 02.12.20, 3:29 PM30

English

BASIC

OPERATION

Sound field effects

The 6-channel soundtracks found on 70-mm film produce precise sound field localization and rich, deep sound without

using matrix processing. This unit’s MOVIE THEATER programs provide the same quality of sound and sound

localization that 6-channel soundtracks do. The built-in Dolby Digital or DTS decoder brings the professional-quality

sound designed for movie theaters into your home. With this unit’s MOVIE THEATER programs, you can use Dolby

Digital or DTS technology to recreate a dynamic sound that gives you the feeling of being in a public theater.

■ Dolby Digital/DTS + DSP sound field effect

These programs use YAMAHA’s tri-field DSP processing

on each of the Dolby Digital or DTS signals for the front,

left surround, and right surround channels. This

processing enables this unit to reproduce the immense

sound field and surround expression of a Dolby Digital-

or DTS-equipped movie theater without sacrificing the

clear separation of all channels.

■ Dolby Digital EX/DTS-ES + DSP sound field effect

These programs provide you with the maximum experience of the spacious surround effects by adding an extra rear

center DSP sound field created from the rear center channel.

■ Dolby Pro Logic + DSP sound field effect

Most movie material has 4-channel (left, center, right, and

surround) sound information encoded by Dolby Surround

matrix processing and stored on the left and right tracks.

These signals are processed by the Dolby Pro Logic

decoder. The MOVIE THEATER programs are designed

to recreate the spaciousness and delicate nuances of

sound that tend to be lost in the encoding and decoding

processes.

■ Dolby Pro Logic II/DTS Neo:6

This unit comes with Dolby Pro Logic II and DTS Neo:6 decoders which decode 2-channel Dolby Surround data into

five or six full range channels. Both decoders have two modes, MOVIE/CINEMA for movies, and MUSIC for 2-

channel sources.

Surround DSP

sound field

Right surround DSP

sound field

Presence DSP

sound field

Left surround DSP

sound field

Presence DSP

sound field

CINEMA-DSP

0106RX-V540440_28-31_EN-U.p65 02.12.20, 3:29 PM31

TUNING

4 Press PRESET/TUNING l / h once to begin

automatic tuning.

Press h to tune in to a higher frequency, or press l

to tune in to a lower frequency.

When the unit is tuned in to a station, the “TUNED”

indicator lights up and the frequency of the station

received is shown on the front panel display.

■ Manual tuning

If the signal from the station you are trying to select is

weak, you must tune in to it manually.

1 Select TUNER and the reception band

following steps 1 and 2 described in

“Automatic tuning” at left.

2 Press TUNING MODE (AUTO/MAN’L MONO)

until the “AUTO” indicator disappears from

the front panel display.

If the colon (:) appears on the front panel display,

press PRESET/TUNING (EDIT) to turn it off.

3 Press PRESET/TUNING

l / h to tune in to the

desired station manually.

Hold down the button to

continue searching.

Note

• Manually tuning in to an FM station will automatically change

the reception mode to monaural to increase the signal quality.

There are 2 methods of tuning; automatic and manual.

Automatic tuning is effective when station signals are

strong and there is no interference.

■ Automatic tuning

1 Rotate the INPUT selector (or press TUNER

on the remote control) to select TUNER as

the input source.

2 Press FM/AM to select the reception band.

“FM” or “AM” appears on the front panel display.

3 Press TUNING MODE (AUTO/MAN’L MONO)

so that the “AUTO” indicator lights up on the

front panel display.

If the colon (:) appears on the front panel display,

press PRESET/TUNING (EDIT) to turn it off.

Lights up

Front panel Remote control

Disappears

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

233

INPUT

AUX

TV/CBL

VCR

VCR2/DVR

DVD

MD/CD-R TUNERCD

FM/AM

AUTO/MANUAL MONO

TUNING MODE

AUTO

EDIT

PRESET/TUNING

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

AUTO

TUNED

A AM 1440 kHz

PRESET/TUNING

SET MENU

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

AUTO

TUNED

A AM 1530 kHz

AUTO/MANUAL MONO

TUNING MODE

AUTO

EDIT

PRESET/TUNING

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

TUNED

A AM 1440 kHz

PRESET/TUNING

SET MENU

0107RX-V540440_32-37_EN-U.P65 02.12.20, 5:53 PM32

English

BASIC

OPERATION

Presetting stations

■ Automatically presetting stations (for FM

stations)

You can use the automatic preset tuning feature to store

FM stations. This function enables the unit to

automatically tune in to FM stations with strong signals,

and to store up to 40 (8 stations x 5 groups) of those

stations in order. You can then recall any preset station

easily by selecting the preset number.

1 Press FM/AM to select the FM band.

2 Press TUNING MODE (AUTO/MAN’L MONO)

until the “AUTO” indicator lights up on the

front panel display.

3 Press and hold MEMORY (MAN’L/AUTO FM)

for at least 3 seconds.

The preset number and the “MEMORY” and

“AUTO” indicators flash. After about 5 seconds,

automatic preset tuning starts, beginning at the

frequency currently displayed and moving toward the

higher frequencies.

When automatic preset tuning is completed, the front

panel display shows the frequency of the last preset

station.

AUTO

Lights up

Notes

• Any stored station data existing under a preset number is

cleared when you store a new station under that preset number.

• If the number of the received stations does not reach E8,

automatic preset tuning has automatically stopped after

searching all stations.

• Only FM stations with sufficient signal strength are stored

automatically by automatic preset tuning. If the station you

want to store is weak in signal strength, tune in to it manually

in the monaural mode, and store it by following the procedure

described in “Manually presetting stations”.

Automatic preset tuning options

You can select the preset number from which this unit

will store FM stations and/or begin tuning toward lower

frequencies. After pressing MEMORY in step 3:

1. Press A/B/C/D/E and PRESET/TUNING l / h to

select the preset number under which the first station

will be stored. Automatic preset tuning will stop when

stations have all been stored up to E8.

2. Press PRESET/TUNING (EDIT) to turn off the colon

(:) and then press PRESET/TUNING l to begin

tuning toward lower frequencies.

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is set in standby mode,

the power cord is disconnected from the AC outlet, or

the power supply is temporarily cut due to power

failure. However, if the power is cut for more than one

week, the preset stations may be cleared. If so, store

the stations again.

TUNING

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

1 32

FM/AM

AUTO/MANUAL MONO

TUNING MODE

MAN`L/AUTO FM

MEMORY

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

AUTO

MEMORY

A1:FM 89.9 MHz

0107RX-V540440_32-37_EN-U.P65 02.12.20, 3:29 PM33

4 Press PRESET/TUNING l / h to select a

preset station number (1 to 8) while the

“MEMORY” indicator is flashing.

Press h to select a higher preset station number.

Press l to select a lower preset station number.

5 Press MEMORY (MAN’L/AUTO FM) on the

front panel while the “MEMORY” indicator is

flashing.

The station band and frequency appear on the front

panel display with the preset group and number you

have selected.

Shows the displayed station has been stored as C3.

6 Repeat steps 1 to 5 to store other stations.

Notes

• Any stored station data existing under a preset number is

cleared when you store a new station under that preset number.

• The reception mode (stereo or monaural) is stored along with

the station frequency.

■ Manually presetting stations

You can store up to 40 stations (8 stations x 5 groups)

manually.

1 Tune in to a station.

See page 32 for tuning instructions.

When tuned to a station, the front panel display

shows the frequency of the station received.

2 Press MEMORY (MAN’L/AUTO FM).

The “MEMORY” indicator flashes for about

5 seconds.

3 Press A/B/C/D/E repeatedly to select a preset

station group (A to E) while the “MEMORY”

indicator is flashing.

The group letter appears. Check that the colon (:) is

showing on the front panel display.

Flashes

TUNING

Preset group

Preset number

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

2,5

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

TUNED

A AM 1440 kHz

MAN`L/AUTO FM

MEMORY

A/B/C/D/E

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

MEMORYTUNED

C:AM 1440 kHz

PRESET/TUNING

SET MENU

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

MEMORYTUNED

C3:AM 1440 kHz

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

TUNED

C3:AM 1440 kHz

MAN`L/AUTO FM

MEMORY

0107RX-V540440_32-37_EN-U.P65 02.12.20, 3:29 PM34

English

BASIC

OPERATION

■ Exchanging preset stations

You can exchange the assignment of two preset stations.

The example below describes the procedure for

exchanging preset station “E1” with “A5”.

1 Select preset station “E1” by using the

A/B/C/D/E and PRESET/TUNING l / h.

See “Selecting a preset station” at left.

2 Press and hold PRESET/TUNING (EDIT) for

at least 3 seconds.

“E1” and the “MEMORY” indicator flash on the

front panel display.

3 Select preset station “A5” by using the

A/B/C/D/E and PRESET/TUNING l / h.

“A5” and the “MEMORY” indicator flash on the

front panel display.

4 Press PRESET/TUNING (EDIT) again.

The stations stored at the two preset assignments are

exchanged.

Selecting a preset station

You can recall any desired station simply by selecting the

preset station number under which it was stored.

1 Press A/B/C/D/E (A/B/C/D/E on the remote

control) to select the preset station group.

The preset group letter appears on the front panel

display and changes each time you press A/B/C/D/E.

2 Press PRESET/TUNING l / h (PRESET u /

d on the remote control) to select a preset

station number (1 to 8).

The preset group and number appear on the front

panel display along with the station band and

frequency, and the “TUNED” indicator lights up.

Shows the exchange of stations has been

completed.

Front panel

Remote control

Front panel

Remote control

TUNING

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

TUNED

C3:AM 1440 kHz

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

REC

DISC SKIP

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

AUDIO

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

A/B/C/D/E

SET MENU

A/B/C/D/E

PRESET/TUNING

SET MENU

SELECT

PRESET/CH

–

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

2,4

1,31,3

EDIT

PRESET/TUNING

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

MEMORYTUNED

E1:FM 87.5 MHz

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

MEMORYTUNED

A5:FM 90.6 MHz

EDIT

PRESET/TUNING

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

MEMORY

EDIT E1-A5

0107RX-V540440_32-37_EN-U.P65 02.12.20, 3:29 PM35

Use this feature to automatically set this unit in standby

mode after the amount of time you have set. The sleep

timer is useful when you are going to sleep while this unit

is playing or recording a source. The sleep timer also

automatically turns off the external component(s)

connected to AC OUTLET(S).

The sleep timer can only be set with the remote control.

• By connecting a commercially available timer to this unit, you

can also set a wake-up timer. Refer to the operation

instructions of the timer.

■ Setting the sleep timer

1 Select a source and start playback on the

source component.

2 Press SLEEP repeatedly

to set the amount of time.

Each time you press SLEEP,

the front panel display changes

as shown below.

3 The “SLEEP” indicator lights up on the front

panel display soon after the sleep timer has

been set.

The display then returns to the previous indication.

SLEEP TIMER

■ Canceling the sleep timer

Press SLEEP repeatedly until “SLEEP OFF”

appears on the front panel display.

After a few seconds, “SLEEP OFF” disappears, the

“SLEEP” indicator goes off and the display returns

to the previous indication.

• The sleep timer setting can also be canceled by setting this

unit in standby mode by using STANDBY on the remote

control (or STANDBY/ON on the front panel) or by

disconnecting the AC power cord from the AC outlet.

POWER

SLEEP

CODE SET

STANDBY

TRANSMIT

6CH INPUT

SYSTEM

AUX

TV/CBL

TV INPUT

TV MUTE

VOLUME

MUTE

AMP

POWER POWER

AVTV

VCR

DVD

MD/CD-R TUNERCD

–

TV CHTV VOL

SLEEP

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

DSP

HiFi

SLEEP

VOLUME

L R

ROCK CONCERT

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

DSP

HiFi

SLEEP

VOLUME

L R

SLEEP 120min

0107RX-V540440_32-37_EN-U.P65 02.12.20, 3:29 PM36

English

BASIC

OPERATION

Recording adjustments and other operations are

performed on other recording components. Refer to the

operation instructions for these components for details on

their operation.

1 Turn on the power of this unit and all

connected components.

2 Select the source component you want to

record from.

3 Start playback (or select a broadcast station)

on the source component.

4 Start recording on the recording component.

Front panel Remote control

RECORDING

Notes

• Do a test recording before you start an actual recording.

• When this unit is set in standby mode, you cannot record

between the components connected to it.

• DSP programs and volume, bass, and treble settings do not

affected the recorded material.

• You cannot record from a source connected to the 6CH

INPUT jacks on this unit.

• Input sources are not output to the same OUT (REC) channel.

(For example, the signal input from VCR IN is not output to

VCR OUT.)

• This unit’s DIGITAL OUTPUT jack and analog OUT(REC)

jacks are independent. To record a source using a digital

recording component connected to the DIGITAL OUTPUT

jack, connect the source component to one of the DIGITAL

INPUT jacks.

• Check the copyright laws in your country if you wish to

record from records, CDs, radio, etc. Recording of

copyrighted material may infringe copyright laws.

If you playback a video source that uses scrambled or

encoded signals to prevent it from being dubbed, the

picture itself may be disturbed due to those signals.

■ Special considerations when recording

DTS material

The DTS signal is a digital bitstream. Attempting to

digitally record the DTS bitstream will result in noise

being recorded. Therefore, if you want to use this unit to

record sources that have DTS signals recorded on them,

the following considerations and adjustments need to be

made.

For LDs, DVDs and CDs encoded with DTS, follow the

operating instructions of your player to set it to output an

analog signal, if it is compatible with the DTS format.

INPUT

AUTO/MANUAL MONO

MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING

FM/AM

RAUDIOLVIDEO

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAMSTEREOSPEAKERS

6CH INPUTINPUT MODE

SILENT

PHONES

VOLUME

VIDEO AUX

STANDBY

/ON

BASS/TREBLE

CONTROL

POWER

SLEEP

CODE SET

STANDBY

TRANSMIT

6CH INPUT

SYSTEM

AUX

TV/CBL

TV INPUT

TV MUTE

VOLUME

MUTE

AMP

POWER POWER

AVTV

VCR

DVD

MD/CD-R TUNERCD

–

TV CHTV VOL

INPUT

AUX

TV/CBL

VCR

DVD

MD/CD-R TUNERCD

0107RX-V540440_32-37_EN-U.P65 02.12.20, 6:20 PM37

Adjusting the items on the set

Use the remote control to make adjustments.

• You can change set menu parameters while the unit is

reproducing sound.

• You can use NEXT and SET MENU +/– on the front panel to

change these settings, if the unit is not set to TUNER mode.

Press NEXT to select the category or field you wish to change,

and SET MENU +/– to change the parameters.

Note

• You cannot change some set menu parameters while the unit is

in night listening mode.

1 Press AMP.

2 Press SET MENU to enter

the set menu.

3 Press u / d repeatedly to select the desired

menu.

4 Press j / i to enter the selected menu.

5 Press u / d repeatedly to select the item

you want to adjust.

• By pressing SET MENU repeatedly, you can select items in

the same order as when pressing d.

AMP

SET MENU

You can set the following parameters on the set menu to

obtain a better sound from the unit. Change the settings to

reflect the needs of your listening environment.

Set menu list

The set menus are divided by use and function into the 4

categories listed here.

■ BASIC

The BASIC area contains the basic parameters that you

must set before using this unit. It consists of the following

menus. See pages 19 – 21 for a detailed explanation.

1 SETUP

2 SP LEVEL (Speaker level)

■ SOUND

The SOUND area contains parameters for altering sound

output. It consists of the following menus that you can

use to alter the quality and tone of the sound output by the

system.

1 SPEAKER SET

2 SP DISTANCE (Speaker distance)

3 LFE LEVEL (Low frequency effect level)

4 D. RANGE (Dynamic range)

5 CENTER GEQ (Center graphic equalizer)

6 HP TONE CTRL (Headphone tone control)

■ INPUT

The INPUT area contains parameters concerned with

signal input. It consists of the following menus that you

can use to change the assignment of input jacks.

1 I/O ASSIGN

2 INPUT MODE

■ OPTION

This is a supplementary set up menu provided for your

convenience. It consists of the following menus that you

can use to change display brightness, protect existing

settings, and perform other non-essential functions.

1 DISPLAY SET

2 MEM. GUARD

3 AUDIO MUTE

4 ZONE SET

• In the descriptions for each item from the following page, the

default setting is indicated in bold.

SET MENU

A/B/C/D/E

SELECT

PRESET/CH

–

SET MENU

SELECT

PRESET/CH

TV INPUT

TV MUTE

A/B/C/D/E

VOLUME

LEVEL

TEST

STEREO

EFFECT

RETURN

DISPLAY

TITLE

MUTE

AMP

VCR

–

TV CHTV VOL

–

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

3,5,8

4,6,7

0108RX-V540440_38-44_EN-U.p65 02.12.20, 3:30 PM38

English

ADVANCED

OPERATION

6 Press j / i once to enter

the setup mode of the

selected item.

The last setting you adjusted

appears on the front panel

display.

Depending on the menu item,

press u/d to select a sub

item.

7 Press j / i repeatedly to

change the menu item

setting.

8 Press u / d repeatedly until the menu

disappears or just press one of the DSP

program group buttons to exit from the set

menu.

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is in standby mode.

However, if the power cord is disconnected from the

AC outlet, or the power supply is cut for more than

one week, the stored data will be lost. If this happens,

adjust the items again.

The BASIC and SOUND menus

The “BASIC” menu allows you to easily set the

“SOUND 1 SPEAKER SET” and “SOUND 2 SP

DISTANCE” parameters. It is not necessary to reset

any of the parameters in the “BASIC” menu, but you

can access more detailed parameters in the “SOUND”

menu if you wish.

Note

• After altering parameters in the “SOUND” menu, if you

select “BASIC 1 SETUP” and then select “SET”, the

parameters from the “SOUND” menu alter in response to

any changes you make in “BASIC 1 SETUP”. Do not enter

the “BASIC 1 SETUP” menu unless you wish to change

these settings. If you accidentally enter the “BASIC 1

SETUP” menu, select “CANCEL” to return to the

“BASIC” menu. (page 20)

SELECT

PRESET/CH

–

SELECT

PRESET/CH

–

SELECT

PRESET/CH

–

SOUND 1 SPEAKER SET

(speaker mode settings)

Use this feature to select suitable output modes for your

speaker configuration.

Note

• Some menu item settings have no effect when the unit is

reproducing a source with a digital signal sampling frequency

greater than 48 kHz.

■ 1A CENTER (center speaker mode)

If you add a center speaker to your speaker configuration,

this unit can provide better dialog localization for several

listeners and superior synchronization of sound and

images.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large center speaker. The unit

directs the entire range of the center channel signal to the

center speaker.

SML

Select this if you have a small center speaker. The unit

directs the low-frequency signals (90 Hz and below) of

the center channel to the speakers selected with “1E

BASS”.

NON

Select this if you do not have a center speaker. The unit

directs all of the center channel signal to the main left and

right speakers.

STEREO

EFFECT

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

SELECT

PRESET/CH

–

SET MENU

0108RX-V540440_38-44_EN-U.p65 02.12.20, 3:30 PM39

■ 1B MAIN (main speaker mode)

Choices: LARGE, SMALL

LARGE

Select this if you have large main speakers. The unit

directs the entire range of the main left and right channel

signals to the main left and right speakers.

SMALL

Select this if you have small main speakers. The unit

directs the low-frequency signals (90 Hz and below) of

the main channel to the speakers selected with “1E

BASS”.

■ 1C REAR LR (rear speaker mode)

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have large rear left and right speakers or

if a rear subwoofer is connected to the rear speakers. The

entire range of the rear channel signal is directed to the

rear left and right speakers.

SML

Select this if you have small rear left and right speakers.

The low-frequency signals (90 Hz and below) of the rear

channel are directed to the speakers selected with “1E

BASS”.

NON

Select this if you do not have rear speakers.

• This unit is set in the virtual CINEMA DSP mode when you

select NON for “1C REAR LR”. In this case, the rear center

speaker will automatically be set to NON and the “1D REAR

CT” item will be skipped.

■ 1D REAR CT (rear center speaker mode)

If you add a rear center speaker to your speaker

configuration, this unit can provide more realistic front-

to-back transitions.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large rear center speaker. The

unit directs the entire range of the rear center channel

signal to the rear center speaker.

SML

Select this if you have a small rear center speaker. The

unit directs the low-frequency signals (90 Hz and below)

of the rear center channel to the speakers selected with

“1E BASS”.

NON

Select this if you do not have a rear center speaker. The

unit directs all of the rear center channel signal to the rear

left and right speakers.

■ 1E BASS (bass out mode)

LFE signals carry low-frequency effects when this unit

decodes a Dolby Digital or DTS signal. Low-frequency

signals are defined as 90 Hz and below. The Low-

frequency signals can be directed to both main left and

right speakers, and to the subwoofer (subwoofer can be

used for both stereo reproduction and the DSP program).

Choices: SWFR (subwoofer), MAIN, BOTH

SWFR

Select this if you use a subwoofer. The unit directs the

LFE signals to the subwoofer.

MAIN

Select this if you do not use a subwoofer. The unit directs

LFE signals to the main speakers.

BOTH

The unit directs LFE signals to the subwoofer. Low-

frequency signals designated to the main channels in

accordance with other speaker mode settings are directed

to both main speakers and the subwoofer.

Note

• When you select MAIN for “1E BASS”, the unit directs the

low-frequency signals (90 Hz and below) of the main channel

to the main speakers even if you select SMALL for the main

speaker mode.

SET MENU

0108RX-V540440_38-44_EN-U.p65 02.12.20, 3:30 PM40

English

ADVANCED

OPERATION

SOUND 2 SP DISTANCE

(speaker distance)

Use this feature to adjust the delay applied to center and

rear center channel sounds. This feature works when there

is sound output from the center speakers with a source

such as Dolby Digital or DTS. Ideally, the center speaker

and the rear speakers should be the same distance from

the main listening position as the left and right main

speakers. However, in most home situations, the center

speaker or the rear center speaker is placed in line with

the main speakers or the rear speakers. By delaying the

sound from the center speaker and the rear speakers, you

can adjust the apparent distance from the center speaker

and the rear speakers to the main listening position to

make it seem the same as the distance between the

listening position and main left and right speakers.

1 Press u / d to select “UNIT”.

2 Press j / i to select the unit “meters” or

“feet” to be used in setting.

3 Press u / d to select the speaker for which

you want to adjust the delay.

4 Press j / i to set the delay.

Press i for higher values and j for lower values.

■ Setting by “meters”

Control range: 0.3 to 24.00 m (for main L/R, center,

rear L/R, rear center)

Initial settings: 3.00 m (for main L/R, center, rear L/

R), 2.10 m (for rear center)

■ Setting by “feet”

Control range: 1 to 80 ft (for main L/R, center, rear

L/R, rear center)

Initial settings: 10.0 ft (for main L/R, center, rear L/

R), 7.0 ft (for rear center)

Note

• No delay will be set if you set the same distance for the main

L/R and center, or the rear L/R and rear center.

SOUND 3 LFE LEVEL

Use this feature to adjust the output level of the LFE

(low-frequency effect) channel when playing back a

Dolby Digital or DTS signal. The LFE signal carries low-

frequency special effect sound which is only added to

certain scenes.

Control range:

SPEAKER ............ –20 to 0 dB

HEADPHONE ..... –20 to 0 dB

Initial setting: 0 dB

1 Press u / d to select the item to be

adjusted.

2 Press j to adjust the LFE level.

Note

• Adjust the LFE level according to the capacity of your

subwoofer or headphones.

SOUND 4 D. RANGE

(dynamic range)

Use this feature to adjust the dynamic range. This setting

is effective only when the unit is decoding Dolby Digital

signals.

Choices: MAX, STD (standard), MIN (minimum)

MAX

Select MAX for feature films.

STD

Select STD for general use.

MIN

Select MIN for listening to sources at low volume levels.

SET MENU

0108RX-V540440_38-44_EN-U.p65 02.12.20, 3:30 PM41

SOUND 5 CENTER GEQ (center

graphic equalizer)

Use this feature to adjust the built-in 5-band graphic

equalizer so that the center speaker tonal quality matches

that of the left and right main speakers. You can select the

100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.

Control range (dB): –6 to +6

Initial setting: 0 dB for 5-band

1 Press d to select a higher frequency and u

to select a lower frequency.

2 Press j / i to adjust the level of that

frequency.

Note

• You can monitor the center speaker sound while adjusting this

parameter by using the test tone. Press TEST before starting

the foregoing procedure. Once you begin this procedure, the

test tone remains at the center speaker and you can hear how

the sound changes as you adjust the various frequency levels.

To stop the test tone, press TEST.

SOUND 6

HP TONE CTRL

(headphone tone control)

Use this feature to adjust the level of the bass and treble

when you are using headphones.

Control range (dB):

BASS .................... –6 to +3

TRBL (treble) ....... –6 to +3

Initial setting:

BASS .................... 0 dB

TRBL.................... 0 dB

INPUT 1 I/O ASSIGN (input/

output assignment)

You can assign jacks according to the component to be

used if this unit’s COMPONENT VIDEO input jack or

DIGITAL INPUT/OUTPUT jack settings (component

names for jacks) differ from those of the component. This

lets you to change the jack assignment and effectively

connect more components.

Once assigned, select that component with INPUT (or the

input selector buttons on the remote control).

■ 1A for COMPONENT VIDEO INPUT jacks

Choices: [A] DVD, VCR, V-AUX, D-TV/CBL

[B] DVD, VCR, V-AUX, D-TV/CBL

■ 1B for OPTICAL OUTPUT jack

RX-V540

Choices: (1) MD/CD-R, CD, VCR, V-AUX,

D-TV/CBL, DVD

■ 1C for OPTICAL INPUT jacks

RX-V540

Choices: (2) MD/CD-R, CD, VCR, V-AUX,

D-TV/CBL, DVD

(3) MD/CD-R, CD, VCR, V-AUX,

D-TV/CBL, DVD

(4) MD/CD-R, CD, VCR, V-AUX,

D-TV/CBL, DVD

RX-V440

Choices: (1) MD/CD-R, CD, VCR, V-AUX,

D-TV/CBL, DVD

■ 1D for COAXIAL INPUT jack

RX-V540

Choices: (5) MD/CD-R, CD, VCR, V-AUX,

D-TV/CBL, DVD

RX-V440

Choices: (2) MD/CD-R, CD, VCR, V-AUX,

D-TV/CBL, DVD

Notes

• You cannot select a specific item more than once for the same

type of jack.

• When you connect a component to both the COAXIAL and

OPTICAL jacks, priority is given to the input signals from the

COAXIAL jack.

SET MENU

0108RX-V540440_38-44_EN-U.p65 02.12.20, 3:30 PM42

English

ADVANCED

OPERATION

OPTION 2 MEM. GUARD

(memory guard)

Use this feature to prevent accidental changes to settings

on the unit.

Choices: ON, OFF

Select ON to protect the following features:

• All set menu items

• Center, rear speakers, rear center, and subwoofer levels

• DSP program parameters

Notes

• When this item is set to ON, you cannot use the test tone.

• When this item is set to ON, you cannot select any other set

menu items.

OPTION 3 AUDIO MUTE

Adjusts the amount by which the MUTE function reduces

the output volume.

Choices: MUTE, –50dB, –20dB

MUTE

Completely halts all output of sound.

–50dB

Reduces the volume of the present sound output by 50dB.

–20dB

Reduces the volume of the present sound output by 20dB.

INPUT 2 INPUT MODE

(initial input mode)

Use this feature to designate the input mode for sources

connected to the DIGITAL INPUT jacks when you turn

this unit on (see page 24 for details about the input

mode).

Choices: AUTO, LAST

AUTO

Select this setting to allow the unit to automatically detect

the type of input signal and select the appropriate input

mode.

LAST

Select this setting to set this unit to automatically select

the last input mode used for the respective sources.

OPTION 1 DISPLAY SET

■ DIMMER

Use this to adjust the brightness of the front panel display.

Control range: –4 to 0

■ V CONV. (Video conversion)

RX-V540

(With the exception of China and General models)

Use this feature to turn on/off the conversion of

composite signals to S-video signals to output through the

S-video jack when the unit is receiving a video signal that

is not in the S-video format.

Choices: ON, OFF

Select ON to convert composite signals to S-video

signals.

OFF

Select OFF to stop the conversion of composite signals to

S-video signals.

SET MENU

0108RX-V540440_38-44_EN-U.p65 02.12.20, 3:30 PM43

OPTION 4 ZONE SET

■ SP B (speaker B set)

Use this feature to select the location of the main speakers

connected to the SPEAKERS B terminals.

Choices: MAIN, ZONE B

MAIN

Select this to turn on/off SPEAKERS A and B when the

speakers connected to the SPEAKERS B terminals are set

in the main room.

ZONE B

Select this if the speakers connected to the SPEAKERS B

terminals are set another room. If SPEAKERS A is turned

OFF and SPEAKERS B is turned ON, all the speakers

including the subwoofer in the main room are muted and

the unit outputs sound from SPEAKERS B only.

Notes

• If you connect headphones to the PHONES jack on the unit,

the sound is output from both headphones and SPEAKERS B.

• When a DSP program is selected, the unit automatically enters

the Virtual CINEMA DSP mode.

SET MENU

0108RX-V540440_38-44_EN-U.p65 02.12.20, 3:30 PM44

English

ADVANCED

OPERATION

REMOTE CONTROL FEATURES

In addition to controlling this unit, the remote control can operate other A/V components made by YAMAHA and other

manufacturers. To control other components, set up the remote control with the appropriate manufacturer codes.

Control area

■ Controlling this unit

The shaded areas below can be used to control this unit

when the AMP mode is selected. Press AMP to select the

AMP mode.

★/★★ buttons and input

selector buttons switch the

control area for each component.

* ★/★★ buttons are to operate

the other components that are

not connected to this unit.

Component control area

You can control up to 9 different components by setting appropriate

manufacturer codes (see page 47).

★/★★ buttons

and input

selector buttons

The buttons in the

dotted lines

(SYSTEM POWER,

STANDBY, SLEEP,

6CH INPUT,

VOLUME +/– and

MUTE) function in

any mode.

Press AMP to

control this unit.

POWER

SLEEP

CODE SET

STANDBY

TRANSMIT

6CH INPUT

SYSTEM

AUX

TV/CBL

REC

DISC SKIP

SET MENU

SELECT

PRESET/CH

TV INPUT

TV MUTE

A/B/C/D/E

AUDIO

VOLUME

LEVEL

TEST

STEREO

EFFECT

RETURN

DISPLAY

TITLE

MUTE

AMP

POWER POWER

VCR

DVD

MD/CD-R TUNERCD

–

TV CHTV VOL

–

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

TV AV

POWER

SLEEP

CODE SET

STANDBY

TRANSMIT

6CH INPUT

SYSTEM

AUX

TV/CBL

REC

DISC SKIP

SET MENU

SELECT

PRESET/CH

TV INPUT

TV MUTE

A/B/C/D/E

AUDIO

VOLUME

LEVEL

TEST

STEREO

EFFECT

RETURN

DISPLAY

TITLE

MUTE

AMP

POWER POWER

AVTV

VCR

DVD

MD/CD-R TUNERCD

–

TV CHTV VOL

–

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

REC

DISC SKIP

SET MENU

SELECT

PRESET/CH

TV INPUT

TV MUTE

A/B/C/D/E

AUDIO

LEVEL

TEST

STEREO

EFFECT

RETURN

DISPLAY

TITLE

–

TV CHTV VOL

–

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

■ Controlling other component

The shaded areas below can be used to control other

components. Each button has a different function

depending on the selected components. Select the

component you want to control by pressing an input

selector button.

0109RX-V540440_45-48_EN-U.p65 02.12.20, 3:30 PM45

REMOTE CONTROL FEATURES

Setting the manufacturer code

You can control other components by setting a

manufacturer code. Codes can be set for each of the 9

component controls.

The following table shows factory-set component

(Library: component category) and the manufacturer code

for each component control.

1 Press an input selector button or ★/★★ to

select the component you want to set up.

2 Press CODE SET using a ballpoint pen or

similar object.

The TRANSMIT indicator flashes twice.

3 Press the numeric buttons to enter the four

digit manufacturer’s code for the component

to be used.

Refer to “LIST OF MANUFACTURER’S CODES”

at the end of this manual.

The TRANSMIT indicator flashes twice.

Notes

• If the manufacturer of your component has more than one

code, try each of them until you find the correct one.

• If you wait for more than 30 seconds during step 3, the setup

process is canceled. If this happens, start over from step 2.

CODE SET

Component

control

(buttons)

MD/CD-R

TUNER

DVD

D-TV/CBL

V-AUX

VCR

★

★★

Component category

(Library)

TUNER

DVD

–

Manufacturer

YAMAHA

–

TRANSMIT

Code

0005

0024

0003

0098

–

CODE SET

TRANSMIT

Clearing setup manufacturer

codes

■ Clearing setup manufacturer code for the

component control

1 Press an input selector button or ★/★★ to

select the component control for which you

want to clear the manufacturer code.

2 Press CODE SET by using a ballpoint pen or

similar object.

The TRANSMIT indicator flashes twice.

Note

• If you do not press any button within 30 seconds after step 2,

the clearing process cancels. If this happens, start over from

step 1.

3 Enter the code number “0000”.

The TRANSMIT indicator flashes twice, and the

manufacturer code for the selected component is

cleared.

• You can clear all setup manufacturer codes at once by entering

the code number “9990”.

AUX

TV/CBL

VCR

★

DVD

MD/CD-R TUNERCD

★★

STEREO

EFFECT

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

AUX

TV/CBL

VCR

★

DVD

MD/CD-R TUNERCD

★★

0109RX-V540440_45-48_EN-U.p65 02.12.20, 3:30 PM46

English

ADVANCED

OPERATION

REMOTE CONTROL FEATURES

Controlling other components

DVD player VCR TV, digital/cable TV CD player CD/MD recorder Tuner

1 AV POWER *

Power *

VCR power *

Power *

Power

2 TV POWER *

TV power *

TV power

3 TV CH + *

TV channel up *

TV channel up TV channel up *

TV channel up *

TV channel up

TV CH – *

TV channel down

TV channel down TV channel down

TV channel down

4 TV VOL + *

TV volume up *

TV volume up TV volume up *

TV volume up *

TV volume up

TV VOL – *

TV volume down

TV volume down TV volume down

TV volume down

5 TV MUTE *

TV mute *

TV mute TV mute *

TV mute *

TV mute

6 TV INPUT *

TV input *

TV input TV input *

TV input *

TV input

7 1-9, 0, +10

Numeric buttons Numeric buttons Numeric buttons Numeric buttons Numeric buttons Preset stations (1-8)

8 TITLE Title

9 PRESET/CH u Up VCR channel up Preset up

PRESET/CH d Down

VCR channel down

Preset down

PRESET/CH j Left

PRESET/CH i Right

SELECT Select

0 RETURN Return

REC/DISC SKIP

Disc skip Rec *

VCR rec Disc skip Rec (MD)

w Play Play *

VCR play Play Play

Search backward Search backward

VCR search backward

Search backward Search backward

r Search forward Search forward *

VCR search forward

Search forward Search forward

AUDIO Audio

d Pause Pause *

VCR pause Pause Pause

t Skip backward Skip backward Skip backward

y Skip forward Skip forward Skip forward

a Stop Stop *

VCR stop Stop Stop

w ENTER Title/Index Enter Enter Index Index

e MENU Menu A/B/C/D/E

r DISPLAY Display Display Display

This button functions only when the original remote control of the component has a POWER button.

These buttons can operate your TV without switching the input if the manufacturer code is set in D-TV/CBL or ★★. When the

manufacturer code for your TV is set up in the both D-TV/CBL and ★★ areas, priority is given to the signal in the D-TV/CBL area.

These buttons can operate your VCR without switching the input to VCR if the manufacturer code is set in VCR.

You can operate other components if you have set the

manufacturer code for your component in the remote

control. Note, however, that some buttons may not

operate the component correctly.

Once you select an input source, the remote control

switches to the mode for operating the component.

POWER

SLEEP

CODE SET

STANDBY

TRANSMIT

6CH INPUT

SYSTEM

AUX

TV/CBL

TV INPUT

TV MUTE

VOLUME

MUTE

AMP

POWER POWER

AVTV

VCR

DVD

MD/CD-R TUNERCD

–

TV CHTV VOL

HALL

ENTER-

TAINMENT

ROCK

CONCERT

JAZZ CLUB

3421

REC

DISC SKIP

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

AUDIO

LEVEL

TEST

STEREO

EFFECT

RETURN

DISPLAY

TITLE

MUTE

–

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

0109RX-V540440_45-48_EN-U.p65 02.12.20, 3:30 PM47

Using the test tone

Use the test tone to set speaker levels so that the volume

from each speaker is identical when heard from your

listening position.

1 Press AMP.

2 Press TEST.

The unit will output a test tone.

3 Press u / d repeatedly to select a speaker

to adjust.

Each time you press d, the unit will cycle through

the speakers in the following order:

TEST LEFT(main L)→TEST

CENTER(center)→TEST RIGHT(main R)→TEST R

SUR.(rear R)→TEST REAR CNTR(rear

center)→TEST L SUR.(rear L)→TEST

SUBWOOFER(subwoofer)→.....

(Press u to cycle the speakers in the reverse order.)

4 Press j / i to adjust speaker volumes.

5 Press TEST when you have completed your

adjustment.

The test tone halts.

Notes

• You cannot enter test mode if headphones are connected to the

PHONES jack. Remove the headphones from the PHONES

jack.

• You cannot adjust speaker volumes if the “SOUND 1

SPEAKER SET” parameter on the set menu is set to NON.

• You cannot adjust the subwoofer level if the “1E BASS”

parameter in “SOUND 1 SPEAKER SET” in the set menu is

set to MAIN.

• If you select “BASIC 1 SETUP” in the set menu and then

select “SET”, speaker levels change in response to any

changes you make in ”BASIC 1 SETUP”.

• Depending on the source the unit is reproducing, the speaker

levels set with the test tone may not be to your liking. If this is

the case, adjust the speaker levels while listening to the

source.

SETTING THE SPEAKER LEVELS

Adjusting the volume during

playback

You can adjust the volume of the speakers while listening

to sound playback.

1 Press AMP.

2 Press LEVEL repeatedly to select the

speaker you want to adjust.

The unit cycles through the speakers in the following

order each time you press LEVEL:

MAIN L→CENTER→MAIN R→R SUR.

(rear R)→REAR CT (rear center)→L SUR.

(rear L)→SWFR (subwoofer)→.....

• Pressing LEVEL once opens the level display. Press u / d at

this time to select a speaker.

3 Press j / i to adjust the speaker volume.

• The center and rear speakers can be adjusted by a

maximum of –10dB ~ +10dB.

• The main speakers and subwoofer can be adjusted

by a maximum of –20dB ~ 0dB.

Notes

• You cannot adjust speaker levels if the “SOUND 1 SPEAKER

SET” parameter in the set menu is set to NON.

• You cannot adjust the subwoofer level if the “1E BASS”

parameter in “SOUND 1 SPEAKER SET” in the set menu is

set to MAIN.

• If you use LEVEL to adjust speaker levels, the speaker levels

you previously set with the test tone will also change.

• If you select “BASIC 1 SETUP” in the set menu and then

select “SET”, speaker levels change in response to any

changes you make in ”BASIC 1 SETUP”.

SET MENU

SELECT

PRESET/CH

TV INPUT

TV MUTE

A/B/C/D/E

VOLUME

LEVEL

TEST

STEREO

EFFECT

RETURN

DISPLAY

TITLE

MUTE

AMP

VCR

–

TV CHTV VOL

–

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

SET MENU

SELECT

PRESET/CH

TV INPUT

TV MUTE

A/B/C/D/E

VOLUME

LEVEL

TEST

STEREO

EFFECT

RETURN

DISPLAY

TITLE

MUTE

AMP

VCR

–

TV CHTV VOL

–

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

2,5

0109RX-V540440_45-48_EN-U.p65 02.12.20, 3:30 PM48

English

ADDITIONAL

INFORMATION

SOUND FIELD PROGRAM PARAMETER EDITING

Changing parameter settings

The initial sound field program settings will provide you

an excellent listening experience as they are. It is not

necessary to alter these settings, but you can create an

original listening environment by doing so.

Note

• The editable parameters vary depending on the sound field

program you select. Refer to the explanation for the parameter.

1 Press AMP.

2 Select a sound field program.

3 Press u / d to select the

parameter you want to

change.

4 Press j / i to change the

parameter setting.

SET MENU

SELECT

PRESET/CH

TV INPUT

TV MUTE

A/B/C/D/E

VOLUME

LEVEL

TEST

STEREO

EFFECT

RETURN

DISPLAY

TITLE

MUTE

AMP

VCR

–

TV CHTV VOL

–

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

AMP

STEREO

EFFECT

HALL

ENTER-

TAINMENT

MUSIC

VIDEO

THEATER

NIGHT

6.1/5.1

MOVIE

THEATER 1

MOVIE

THEATER 2

/DTS

SUR.

ROCK

CONCERT

JAZZ CLUB

3421

ENTER

+10

67 8

SELECT

PRESET/CH

–

SELECT

PRESET/CH

–

5 Repeat steps 2 – 4 if you wish to alter other

parameters.

Note

• You cannot alter these parameters if the “OPTION 2 MEM.

GUARD” parameter in the set menu is set to ON. Change this

setting to OFF if you wish to alter any other parameters.

0110RX-V540440_49-57_EN-U.p65 02.12.20, 3:31 PM49

Digital sound field parameter descriptions

You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your

listening room. Not all of the following parameters are found in every program.

■ DSP LEVEL

Function: This parameter adjusts the level of all the DSP effect sounds within a narrow range.

Description: Depending on the acoustics of your listening room, you may want to increase or decrease the DSP

effect level relative to the direct sound.

Control Range: –6 dB to +3 dB

■ DELAY

Function: Adjusts the time difference between the beginning of the sound from the main speakers and the

beginning of the sound effect from the rear speakers. The larger the value, the later the sound effect is

generated.

Control range: 1 to 99 ms (Control range varies depending on the input source and the DSP program you use.)

For 6ch Stereo

Function: These parameters adjust the volume level for each channel in 6-channel stereo mode.

Control range: 0 to 100%

■ CT LEVEL (Center level)

■ RL LEVEL (Rear left level)

■ RR LEVEL (Rear right level)

■ RC LEVEL (Rear center level)

For PRO LOGIC II Music

■ PANORAMA

Function: Extends the front stereo image to include the surround speakers for a wraparound effect.

Choices: OFF/ON, initial setting is OFF.

■ DIMENSION

Function: Gradually adjusts the soundfield either towards the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).

■ CT WIDTH (Center width)

Function: Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the

center image towards the main left and right speakers.

Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only

from main left and right speakers), initial setting is 3.

For DTS Neo:6 Music

■ C. IMAGE (Center Image)

Function: This parameter adjusts the center image from all three front speakers to varying degrees.

Control Range: 0 to 0.5

SOUND FIELD PROGRAM PARAMETER EDITING

0110RX-V540440_49-57_EN-U.p65 02.12.20, 3:31 PM50

English

ADDITIONAL

INFORMATION

TROUBLESHOOTING

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed

below or if the instruction below does not help, set this unit to standby mode, disconnect the power cord, and contact the

nearest authorized YAMAHA dealer or service center.

■ General

Problem

This unit fails to turn

on when STANDBY/

ON (or SYSTEM

POWER) is pressed,

or enters in standby

mode soon after the

power has been

turned on.

No sound.

The picture does not

appear.

The sound suddenly

goes off.

Cause

The power cord is not connected or the

plug is not completely inserted.

The IMPEDANCE SELECTOR switch on

the rear panel is not fully set to either the

left or right position.

The protection circuitry has been

activated.

This unit has been exposed to a strong

external electric shock (such as lightning

and strong static electricity).

Incorrect input or output cable connec-

tions.

No appropriate input source is selected.

The speaker connections are not secure.

The main speakers have not been selected

properly.

The volume is turned down.

The sound is muted.

Digital signals which this unit cannot

reproduce are being received from a

source component e.g; a CD-ROM.

The output and input for the picture are

connected to different types of video

jacks.

The protection circuit has been activated

because of a short circuit, etc.

The sleep timer has turned the unit off.

The sound is muted.

Remedy

Connect the power cord firmly.

Set the switch fully to the left or right position when

this unit is in standby mode.

Make sure all speaker wire connections on this unit

and on all speakers are secure and that the wire for

each connection is not touching anything other than

its respective connection.

Set this unit in standby mode, disconnect the power

cord, plug it back in after 30 seconds, then use it

normally.

Connect the cables properly. If the problem persists,

the cables may be defective.

Select an appropriate input source with INPUT or

6CH INPUT (or the input selector buttons).

Secure the connections.

Select the main speakers with SPEAKERS A and/or

Turn up the volume.

Press MUTE or any operation buttons on the unit to

cancel mute and adjust the volume.

Play a source whose signals this unit can reproduce.

Connect components using the same type of video

jacks (S VIDEO, VIDEO (composite), or COMPO-

NENT VIDEO) for both the input and output.

Check the IMPEDANCE SELECTOR switch is set to

the appropriate position and then turn the unit back

on.

Check the speaker wires are not touching each other

and then turn the unit back on.

Turn on the power, and play the source again.

Press MUTE or any operation buttons on the unit to

cancel a mute and adjust the volume.

Refer to

page

–

16 – 17

–

10 – 17

16 – 17

–

10 – 11

–

0110RX-V540440_49-57_EN-U.p65 02.12.20, 3:31 PM51

Problem

Only the speaker on

one side can be

heard.

No sound from the

effect speakers.

No sound from the

center speaker.

No sound from the

rear speakers.

No sound from the

subwoofer.

Poor bass

reproduction.

Cause

Incorrect cable connections.

The sound effect is switched off.

A Dolby Surround, Dolby Digital or DTS

decoding DSP program is being used with

material not encoded with Dolby

Surround, Dolby Digital or DTS.

A digital signal with a sampling

frequency greater than 48 kHz is input to

this unit.

The output level of the center speaker is

set to minimum.

“SOUND 1A CENTER” on the set menu

is set to NON.

One of the Hi-Fi DSP programs (1 to 4)

has been selected (except for 6ch Stereo).

The source encoded with a Dolby Digital

or DTS signal does not have a center

channel signal.

The output level of the rear speakers is set

to minimum.

A monaural source is being played with

program 9.

“SOUND 1E BASS” on the set menu is

set to MAIN when a Dolby Digital or

DTS signal is being played.

“SOUND 1E BASS” on the set menu is

set to SWFR or MAIN when a 2-channel

source is being played.

The source does not contain low bass

signals (90 Hz and below).

“SOUND 1E BASS” on the set menu is

set to SWFR or BOTH and your system

does not include a subwoofer.

The speaker mode settings (main, center,

rear, or rear center) on the set menu does

not match your speaker configuration.

Remedy

Connect the cables properly. If the problem persists,

the cables may be defective.

Press STEREO/EFFECT to turn it on.

Select another DSP program.

Raise the level of the center speaker.

Select the appropriate mode for your center speaker.

Select another DSP program.

Raise the output level of the rear speakers.

Select another DSP program.

Select SWFR or BOTH.

Select BOTH.

Select MAIN.

Select the appropriate position for each speaker based

on the size of the speakers in your configuration.

Refer to

page

–

25 – 30

–

25 – 30

–

25 – 30

–

39 – 40

TROUBLESHOOTING

0110RX-V540440_49-57_EN-U.p65 02.12.20, 3:31 PM52

English

ADDITIONAL

INFORMATION

Problem

No sound from the rear

center speaker.

A “humming” sound can

be heard.

The volume level cannot

be increased, or the

sound is distorted.

The sound effect cannot

be recorded.

RX-V540

A source cannot be

recorded by a digital

recording component

connected to the

DIGITAL OUTPUT jack of

this unit.

The sound field

parameters and some

other settings on the

unit cannot be changed.

The unit does not

operate properly.

“CHECK SP WIRES”

appears on the front

panel display.

There is noise interfer-

ence from digital or

high-frequency

equipment, or this unit.

The unit suddenly turns

into standby mode.

Cause

“SOUND 1C REAR LR” or “SOUND 1D

REAR CT” on the set menu is set to NON.

The Dolby Digital EX or the DTS-ES

decoder is not switched on.

Incorrect cable connections.

The component connected to the OUT

(REC) jacks of this unit is turned off.

It is not possible to record the sound effect

with a recording component.

There is no source component connected

to the DIGITAL INPUT jacks of this unit.

“OPTION 2 MEM. GUARD” in the set

menu is set to ON.

The internal microcomputer has been

frozen by an external electric shock (such

as lightning or excessive static electricity)

or by a power supply with low voltage.

The speaker cables are short circuited.

This unit is too close to the digital or high-

frequency equipment.

The internal temperature has become too

high and the overheat protection circuitry

has been activated.

Remedy

Select LRG or SML.

Press 6.1/5.1 on the remote control to switch the

decoder on.

Firmly connect the audio plugs. If the problem

persists, the cables may be defective.

Turn on the power to the component.

Connect the source component to the DIGITAL

INPUT jacks of this unit.

Set “OPTION 2 MEM. GUARD” in the set menu

to OFF.

Disconnect the AC power cord from the outlet

and then plug it in again after about 30 seconds.

Make sure all speaker cables are connected

correctly.

Move this unit further away from such

equipment.

Wait until the unit cools down and then turn it

back on.

Refer to

page

–

10 – 12

–

TROUBLESHOOTING

0110RX-V540440_49-57_EN-U.p65 02.12.20, 3:31 PM53

■ Tuner

FM stereo reception is

noisy.

There is distortion, and

clear reception cannot

be obtained even with a

good FM antenna.

The desired station

cannot be tuned in with

the automatic tuning

method.

Previously preset

stations can no longer

be tuned in.

The desired station

cannot be tuned in with

the automatic tuning

method.

There are continuous

crackling and hissing

noises.

There are buzzing and

whining noises

(especially in the

evening).

Problem

Cause

The characteristics of FM stereo

broadcasts may cause this problem

when the transmitter is too far away or

the antenna input is poor.

There is multipath interference.

The station is too weak.

The unit has been disconnected for a

long period.

The signal is weak or the antenna

connections are loose.

Noises result from lightning,

fluorescent lamps, motors, thermostats

and other electrical equipment.

A TV set is being used nearby.

Remedy

Check the antenna connections.

Try using a high-quality directional FM

antenna.

Use the manual tuning method.

Adjust the antenna position to eliminate

multipath interference.

Use a high-quality directional FM antenna.

Use the manual tuning method.

Re-store the stations.

Tighten the AM loop antenna connections and

orient it for best reception.

Use the manual tuning method.

Use an outdoor antenna and a ground wire.

This will help somewhat, but it is difficult to

eliminate all noise.

Move this unit away from the TV.

Refer to

page

–

■ Remote control

Problem

The remote control does

not work nor function

properly.

Cause

Wrong distance or angle.

Direct sunlight or lighting (from an

inverter type of fluorescent lamp, etc.) is

striking the remote control sensor of this

unit.

The batteries are weak.

The manufacture code has not correctly

set.

Even if the manufacturer code is correctly

set, there are some models that do not

respond to the remote control.

Remedy

The remote control will function within a

maximum range of 6 m (20 feet) and no more

than 30 degrees off-axis from the front panel.

Reposition this unit.

Replace all batteries with new ones.

Set the code correctly.

Try setting another code of the same manufac-

turer.

Refer to

page

–

TROUBLESHOOTING

0110RX-V540440_49-57_EN-U.p65 02.12.20, 3:31 PM54

English

ADDITIONAL

INFORMATION

GLOSSARY

■ Dolby Surround

Dolby Surround uses a 4 channel analog recording system

to reproduce realistic and dynamic sound effects: 2 main

left and right channels (stereo), a center channel for

dialog (monaural), and a rear channel for special sound

effects (monaural). The rear channel reproduces sound

within a narrow frequency range.

Dolby Surround is widely used with nearly all video tapes

and laser discs, and in many TV and cable broadcasts as

well. The Dolby Pro Logic decoder built into this unit

employs a digital signal processing system that

automatically stabilizes the volume on each channel to

enhance moving sound effects and directionality.

■ Dolby Digital

Dolby Digital is a digital surround sound system that

gives you completely independent multi-channel audio.

With 3 front channels (left, center, and right), and 2 rear

stereo channels, Dolby Digital provides 5 full-range audio

channels. With an additional channel especially for bass

effects, called LFE (low frequency effect), the system has

a total of 5.1 channels (LFE is counted as 0.1 channel).

By using 2-channel stereo for the rear speakers, more

accurate moving sound effects and surround sound

environment are possible than with Dolby Surround. The

wide dynamic range (from maximum to minimum

volume) reproduced by the 5 full-range channels and the

precise sound orientation generated using digital sound

processing provide listeners with previously unheard of

excitement and realism.

With this unit, any sound environment from monaural up

to a 5.1-channel configuration can be freely selected for

your enjoyment.

Dolby Digital EX creates 6 full-bandwidth output

channels from 5.1-channel sources. This is done using a

matrix decoder that derives 3 surround channels from the

2 in the original recording. For the best results, Dolby

Digital EX should be used with movie sound tracks

recorded with Dolby Digital Surround EX. With this

additional channel, you can experience more dynamic and

realistic moving sound especially with scenes with “fly-

over” and “fly-around” effects.

■ Dolby Pro Logic II

Dolby Pro Logic II is an improved technique used to

decode vast numbers of existing Dolby Surround

software. This new technology enables a discrete 5-

channel playback with 2 main left and right channels, 1

center channel, and 2 rear left and right channels (instead

of only 1 rear channel for conventional Pro Logic

technology). A music mode is also available for 2-channel

sources in addition to the movie mode.

■ DTS (Digital Theater Systems) Digital

Surround

DTS digital surround was developed to replace the analog

soundtracks of movies with a 6-channel digital sound

track, and is now rapidly gaining popularity in movie

theaters around the world. Digital Theater Systems Inc.

has developed a home theater system so that you can

enjoy the depth of sound and natural spatial

representation of DTS digital surround in your home.

This system produces practically distortion-free 6-channel

sound (technically, a left, right and center channels, 2 rear

channels, plus an LFE 0.1 channel as a subwoofer, for a

total of 5.1 channels).

The unit incorporates DTS-ES decoder that enables 6.1-

channel reproduction by adding the rear center channel to

existing 5.1-channel format.

■ Neo:6

Neo:6 decodes the conventional 2-channel sources for 6

channel playback by a specific decoder. It enables

playback with the full-range of channels with higher

separation just like digital discrete signal playback. Two

modes are available; “Music mode” for playing music

sources and “Cinema mode” for movies.

■ LFE 0.1 channel

This channel is for the reproduction of low bass signals.

The frequency range for this channel is 20 Hz to 120 Hz.

This channel is counted as 0.1 because it only enforces a

low frequency range compared to the full-range

reproduced by the other 5 channels in a Dolby Digital or

DTS 5.1 channel systems.

■ CINEMA DSP

Since the Dolby Surround and DTS systems were

originally designed for use in movie theaters, their effect

is best felt in a theater having many speakers and

designed for acoustic effects. Since home conditions,

such as room size, wall material, number of speakers, and

so on, can differ so widely, it’s inevitable that there are

differences in the sound heard as well. Based on a wealth

of actually measured data, YAMAHA CINEMA DSP uses

YAMAHA original sound field technology to combine

Dolby Pro Logic, Dolby Digital and DTS systems to

provide the visual and audio experience of movie theater

in the listening room of your own home.

■ SILENT CINEMA

YAMAHA has developed a natural, realistic sound effect

DSP algorithm for headphones.

Parameters for headphones have been set for each sound

field so that accurate representations of all the sound field

programs can be enjoyed using headphones.

0110RX-V540440_49-57_EN-U.p65 02.12.20, 3:31 PM55

■ Virtual CINEMA DSP

YAMAHA has developed a virtual CINEMA DSP

algorithm that allows you to enjoy DSP sound field

surround effects even without any rear speakers by using

virtual rear speakers.

It is even possible to enjoy virtual CINEMA DSP using a

minimal 2-speaker system that does not include a center

speaker.

■ PCM (Linear PCM)

Linear PCM is a signal format under which an analog

audio signal is digitized, recorded and transmitted without

using any compression. This is used as a method of

recording CDs and DVD audio. The PCM system uses a

technique for sampling the size of the analog signal per

very small unit of time. Standing for “pulse code

modulation”, the analog signal is encoded as pulses and

then modulated for recording.

■ Sampling frequency and number of

quantized bits

When digitizing an analog audio signal, the number of

times the signal is sampled per second is called the

sampling frequency, while the degree of fineness when

converting the sound level into a numeric value is called

the number of quantized bits.

The range of rates that can be played back is determined

based on the sampling rate, while the dynamic range

representing the sound level difference is determined by

the number of quantized bits. In principle, the higher the

sampling frequency, the wider the range of frequencies

that can be played back, and the higher the number of

quantized bits, the more finely the sound level can be

reproduced.

■ S-video signal

With the S-video signal system, the video signal normally

transmitted using a pin cable is separated and transmitted

as the Y signal for the luminance and the C signal for the

chrominance through the S-video cable. Using the S

VIDEO jack eliminates video signal transmission loss and

allows recording and playback of even more beautiful

images.

■ Component video signal

With the component video signal system, the video signal

is separated into the Y signal for the luminance and the P

and PR signals for the chrominance. Color can be

reproduced more faithfully with this system because each

of these signals is independent. The component signal is

also called the “color difference signal” because the

luminance signal is subtracted from the color signal.

A monitor with component input jacks is required in

order to use the component signal for output.

GLOSSARY

0110RX-V540440_49-57_EN-U.p65 02.12.20, 3:31 PM56

English

ADDITIONAL

INFORMATION

SPECIFICATIONS

AUDIO SECTION

• Minimum RMS Output Power for Main, Center, Rear, Rear Center

RX-V540

[U.S.A. and Canada models]

20 Hz to 20 kHz, 0.06% THD, 8 Ω ....................................... 80 W

1 kHz, 0.7% THD, 8 Ω .......................................................... 95 W

RX-V540

[Other models]

20 Hz to 20 kHz, 0.06% THD, 8 Ω ....................................... 70 W

1 kHz, 0.7% THD, 8 Ω .......................................................... 85 W

RX-V440

[U.S.A. and Canada models]

20 Hz to 20 kHz, 0.06% THD, 8 Ω ....................................... 75 W

1 kHz, 0.7% THD, 8 Ω .......................................................... 90 W

RX-V440

[Other models]

20 Hz to 20 kHz, 0.06% THD, 8 Ω ....................................... 65 W

1 kHz, 0.7% THD, 8 Ω .......................................................... 80 W

• DIN Standard Output Power

[Europe model]

1 kHz, 0.7% THD, 4 Ω

RX-V540

.................................... 115 W

RX-V440

..................................... 110 W

• Maximum Power (EIAJ)

[China, Korea and General models]

1 kHz, 10% THD, 8 Ω

RX-V540

.................................... 100 W

RX-V440

....................................... 95 W

• Dynamic Power (IHF) 8/6/4/2 Ω

RX-V540

[U.S.A. and Canada models] ...... 100/125/160/200 W

[Other models] .............................. 90/110/145/180 W

RX-V440

[U.S.A. and Canada models] ........ 95/120/150/190 W

[Other models] .............................. 85/105/140/170 W

• Damping Factor

20 Hz to 20 kHz, 8 Ω ................................................. 100 or more

• Frequency Response

CD to Main L/R ...................................... 10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

20 Hz to 20 kHz, 40 W, 8 Ω, Main L/R ................................0.06%

• Signal to Noise Ratio (IHF-A Network)

CD (250 mV, shorted) to Main L/R, Effect Off .................. 100 dB

• Residual Noise (IHF-A Network)

Main L/R ................................................................ 150 µV or less

• Channel Separation (1 kHz/10 kHz)

CD (5.1 kΩ terminated) to Main L/R ........................ 60 dB/45 dB

• Tone Control (Main L/R)

BASS Boost/Cut ...................................................... ±10 dB/60 Hz

TREBLE Boost/Cut ............................................... ±10 dB/20 kHz

• Phones Output ........................................................... 150 mV/100 Ω

• Input Sensitivity

CD, etc .................................................................... 150 mV/47 kΩ

6CH INPUT ............................................................ 150 mV/47 kΩ

• Output Level

OUT (REC) ........................................................... 150 mV/1.2 kΩ

OUTPUT SUBWOOFER ............................................. 4 V/1.2 kΩ

VIDEO SECTION

• Video Signal Type ...................................................... NTSC or PAL

• Signal to Noise Ratio ............................................................... 50 dB

• Frequency Response (MONITOR OUT)

Composite, S-Video

RX-V540

.............. 5 Hz to 10 MHz, –3 dB

Component ................................................. DC to 30 MHz, –3 dB

FM SECTION

• Tuning Range

[U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz

[Other models] .............................................. 87.50 to 108.00 MHz

• 50 dB Quieting Sensitivity (IHF, 100% mod.)

Mono/Stereo ........................ 2.0 µV (17.3 dBf) /25 µV (39.2 dBf)

• Usable sensitivity (IHF, Mono) ............................ 1.0 µV (11.2 dBf)

• Signal to Noise Ratio (IHF)

Mono/Stereo .............................................................. 76 dB/70 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo ................................................................. 0.2%/0.3%

• Stereo Separation (1 kHz) ....................................................... 42 dB

• Frequency Response ........................... 20 Hz to 15 kHz +0.5, –2 dB

AM SECTION

• Tuning Range ......................................... 530/531 to 1710/1611 kHz

• Usable Sensitivity ............................................................. 300 µV/m

GENERAL

• Power Supply

[U.S.A. and Canada models] ............................... AC 120 V/60 Hz

[Australia model] ................................................. AC 240 V/50 Hz

[U.K., Europe and Singapore models] ................ AC 230 V/50 Hz

[Korea model] ...................................................... AC 220 V/60 Hz

[China and General models] ..... AC 110/120/220/240 V, 50/60 Hz

• Power Consumption

[U.S.A. and Canada models] .................................. 270 W/360 VA

[Other models] ..................................................................... 270 W

Standby Mode ......................................................... approx. 0.8 W

• AC Outlets

[U.S.A., Canada, Europe and Singapore models]

.......................................................... 2 (Total 100 W maximum)

[China and General models] .................. 2 (Total 50 W maximum)

[U.K. and Australia models] ......................... 1 (100 W maximum)

• Dimension (W x H x D)

..................... 435 x 161 x 390 mm (17-1/8” x 6-3/8” x 15-3/8”)

• Weight .............................................................. 11.0 kg (24 lbs 4 oz)

*Specifications are subject to change without notice.

0110RX-V540440_49-57_EN-U.p65 02.12.20, 3:31 PM57

LIST OF MANUFACTURER CODES

LISTE DES CODES DES FABRICANTS

A TANDY 0941

ABEX 1151

ADMIRA 1141

ADVENTURA 1131

AIKO 1121

AIWA 1481

AKAI 0331, 1101, 1111

ALBA 0431

ALLERON 1091

AMBASSADOR 1081

AMSTRAD 0481, 1081

ANAM 0251, 1041, 1051,

1061, 1071

ANAM NATIONAL 1041

AOC 0361, 1021, 1031,

1111, 1161

ARCHER 1161

AUDIOSONIC 1001

AUDIOVOX 1051, 1161

BAUER 0441

BAUR 1001

BEIJING 1511, 1551, 1561

BELCOR 1031

BELL & HOWELL 0981, 0991

BEON 1001

BRADFORD 1051

BROCKWOOD 1031

BROKSONIC 1161

BUSH 1001

CANDLE 0351, 0361, 0961,

0971, 1111, 1131

CAPEHART 1021

CARVER 0101

CATHAY 1001

CELEBRITY 0951

CENTURION 0411

CHANGHONG 1541, 1551, 1561,

1621

CITIZEN 0351, 0361, 0921,

0931, 0941, 0961,

0971, 1111, 1121,

1131

CLAIRTONE 1011

CLARIVOX 1001

CONCERTO 0351, 0971

CONROWA 1751

CONTEC 0901, 0911, 1011,

1051

CORANDO 0941

CRAIG 0251, 1051

CROWN 0941, 1051

CURTIS MATHES 0161, 0361,

0931, 0941,

0981, 1111

CXC 1051

DAEWOO 0291, 0301, 0331,

0721, 0941, 1001,

1031, 1121, 1191,

1531, 1581, 1591,

1601

DANSAI 1001

DAYTRON 0941, 1031

DECCA 0271, 1001

DIXI 0331, 1001, 1071

DUMONT 0891, 1031

DYNATECH 0881

ELECTROBAND 0951, 1011

ELECTROHOME 0941

ELECTRON 0941

ELIN 1001

ELTA 0331

EMERSON 0001, 0021, 0061,

0071, 0081, 0091,

0111, 0811, 0821,

0831, 0841, 0851,

0861, 0871, 0901,

0921, 0941, 0981,

1011, 1031, 1051,

1081, 1091

ENVISION 0361, 1111

ERRES 1001

ETRON 0331

FERGUSON 1001

FINLUX 1001

FISHER 0171, 0801, 0981

FORMENTI 0441

FORMONTI 1001

FORTRESS 1141

FUJITSU 1091

FUNAI 1051, 1091, 1501,

1521

FUTURETECH 1051

GE 0131, 0161, 0201,

0751, 0761, 0771,

0781, 0791, 0811,

0861, 1041

GEC 0271, 1001

GEMINI 0391

GENEXXA 0431

GIBRALTER 0891, 1031, 1111

GOODMANS/TASHIKO

0271, 0661, 1001

GRANADA 1001

GRUNDIG 1781, 1791, 1801,

1811, 1821, 1831,

1841, 1851, 1861,

1871, 1881

GUNPY 1051, 1091

HARMAN/KARDON

0721

HALLMARK 0861

HANSEATIC 1001

HARVARD 1051, 1061

HINARI 1001, 1091

HITACHI 0181, 0351, 0671,

0681, 0691, 0701,

0711, 0871, 0941,

0971, 1351

HYPSON 1001

IMA 1051

INDIANA 1001

INFINITY REFERENCE

0101

INTERFUNK 1001

ITT 0611

JANEIL 1131

JBL 0101

JCB 0951

JENSEN 0311

JINXING 1531, 1541, 1551,

1561, 1571, 1621,

1631, 1641, 1651,

1691, 1731

JVC (VICTOR) 0261, 0281, 0641,

0651, 0661, 0841

KAWASHO 0901

KAYPANI 1021

KENWOOD 0361, 1031, 1111

KLOSS 0631, 0721, 1131

KTV 0921, 0941, 1011,

1051, 1111

LEYCO 1001

LG (GOLDSTAR) 0031, 0121,

0351, 0411, 0731,

0741, 0861, 0941,

0971, 1001, 1031,

1111, 1151

LIESENK & TTER 1001

LLOYTRON 0941

LOEWE 1001

LOGIK 0991, 1771

LUXMAN 0351, 0971

LXI 0101, 0621, 0761,

0861, 0981

MAGNAVOX 0101, 0341, 0391,

0401, 0411, 0421,

0581, 0591, 0601,

0611, 0631, 0661,

0961, 1111

MAJESTIC 0991

MARANTZ 0101, 0221, 0361,

1001, 1111

MARK 1001

MATSUI 0271, 0331, 1001

MEDIATOR 1001

MEGATRON 0691, 0861, 1161

MEI 1011

M-ELECTRONIC 1001

MEMOREX 0331, 0571, 0861,

0971, 0981, 0991,

1771

METZ 1791, 1831, 1891,

1901, 1911, 1921,

1931, 1941

MGA 0361, 0561, 0571,

0861, 1031, 1111

MIDLAND 0751, 0761, 0891,

0941, 1151

MITSUBISHI 0221, 0321, 0561,

0571, 0661, 0861,

1031, 1101, 1381

MONTGOMERY 1091

MOTOROLA 1041, 1141

MTC 0351, 0361, 0881,

0931, 0971, 1011,

1031, 1111

MULTITECH 0881, 1051

NAD 0551, 0621, 0861

NEC 0241, 0351, 0361,

0661, 0971, 1031,

1111, 1321, 1711

NECKERMANN 1001

NEI 1001

NIKKAI 0271, 0431, 1001,

1151

NIKKO 0861, 1111, 1121

NOVABEAM 0721

NTC 1121

ONWA 1051

OPTIMUS 0551

OPTONICA 0541, 1141

ORION 0831, 1001

OSAKI 0271, 1151

OTTO VERSAND 1001

PANASONIC 0101, 0191, 0251,

0751, 1041, 1311,

1371, 1431

PANDA 1541, 1721

PENNY 0161, 0361, 0521,

0531, 0621, 0731,

0751, 0761, 0781,

0791, 0861, 0931,

0941, 1031, 1041,

1111, 1151, 1161

PEONY 1561, 1621

PHILCO 0361, 0581, 0591,

0601, 0611, 0631,

0961, 1031, 1111

PHILIPS 0101, 0401, 1001

PHONOLA 1001

PILOT 0941, 1031, 1111

PIONEER 0511, 0551, 0871

PORTLAND 0941, 1031, 1121

PRICECLUB 0931

PRISM 0751

PROSCAN 0761

PROTECH 1001

PROTON 0501, 0861, 0941,

1021, 1161

PULSAR 0891

PULSER 1031

QUASAR 0251, 0751, 1041

QUELLE 1001

RADIO SHACK 0541, 0941,

1031, 1051,

1151

RADIOLA 1001

RCA 0051, 0141, 0151,

0181, 0411, 0491,

0531, 0761, 0771,

0871, 1031

REALISTIC 0541, 0861, 0941,

0971, 0981, 1031,

1051, 1111, 1151

RHAPSODY 1011

R-LINE 1001

RUNCO 0891, 1111

SAISHO 0331, 1081

SAMPO 0361, 0941, 1021,

1111, 1151

SAMSUNG 0331, 0341, 0351,

0361, 0861, 0931,

0941, 0971, 1001,

1031, 1111, 1151

0111RX-V540440_code.p65 02.12.20, 3:31 PM2

SAMSUX 0941

SANYO 0171, 0231, 0271,

0661, 0801, 0911,

0981, 1231, 1251,

1261

SBR 1001

SCHEIDER 1001

SCIMITSU 1031

SCOTCH 0861

SCOTT 0831, 0861, 0941,

1031, 1051, 1091

SEARS 0101, 0161, 0171,

0351, 0481, 0521,

0621, 0761, 0801,

0861, 0971, 0981,

1091

SHANGHAI 1561, 1681

SHARP 0461, 0471, 0541,

0661, 0911, 0941,

1141

SHOGUN 1031

SIGNATURE 0991, 1771

SIMPSON 0581, 0961

SOLAVOX 1151

SONOKO 1001

SONTEC 1001

SONY 0371, 0451, 0661,

0841, 0951, 1281,

1441

SOUNDESIGN 0861, 0961, 1051,

1091

SOUNDWAVE 1001

SPECTRICON 1161

SQUAREVIEW 0481

SSS 1031, 1051

STAR-LITE 1051

SUPREM 0951

SUPRE-MACY 1131

SURPA 0351, 0971

SYLVANIA 0101, 0361, 0441,

0581, 0591, 0601,

0611, 0631, 0961,

1111

SYMPHONIC 0481

SYSLINE 1001

TANDY 0271, 0431, 1141

TATUNG 0271, 0881, 1001,

1041, 1161

TCL 1561, 1631, 1701

TECHNICS 0751

TECHWOOD 0351, 0751, 0971

TEKNIKA 0101, 0351, 0571,

0931, 0941, 0961,

0971, 0991, 1031,

1051, 1091, 1121,

1131, 1771

TELETECH 0331

TERA 0501

THAKRAL 1671

THORM 1001

TMK 0351, 0861, 0971,

1081

TOSHIBA 0381, 0521, 0621,

0661, 0931, 0981,

1301

TOSONIC 1011

TOTEVISION 0941

TRICAL 0911

UNIVERSAL 0781, 0791

UNIVERSUM 1001

VECTOR RESEARCH

0361, 1111

VESTEL 1001

VIDEO CONCEPT 1101

VIDIKRON 0101, 0211

VIDTECH 0861, 1031

VIKING 1131

WARDS 0101, 0361, 0451,

0541, 0581, 0591,

0601, 0611, 0771,

0781, 0791, 0861,

0971, 0991, 1031,

1091, 1111, 1771

WATSON 1001

XOGEGO 1611, 1621, 1661,

1741, 1761

YAMAHA 0361, 1031, 1111

YOKO 1001

ZENITH 0011, 0041, 0891,

0991, 1771

ZONDA 1161

CABLE TV

ABC 0256, 0376

ANTRONIX 0136

ARCHER 0136, 0286

BBT 0076

CABLETIME 0166

CABLEVISION 0196

COLOUR VOICE 0306, 0346

COMTRONICS 0216, 0276

EAGLE COMTRONICS

0276

EASTERN 0066

ELECTRICORD 0206

ELECTUS 0266

GE 0116, 0126

GEC CABLE SYSTEM

0196

HAMLIN H5 0676

HAMLIN H6 0666

HAMLIN H6S 0656

HAMLIN H8 0646

HAMLIN H9 0636

JERROLD 0256

JERROLD 400L 0626

JERROLD 450L 0616

JERROLD 550 0606

JERROLD OSD CATV

0596

JERROLD SPRUCER

0436

MAGNAVOX/PHILIPS

0416, 0426

MAMM 0296

MEMOREX 0386

MOVIE TIME 0146, 0206

NORTHCOAST 0016

NSC 0146

OAK 0106

OAK SIGMA 450 0546

OAK SIGMA 550 0536

PANASONIC TZ 120/130

0476

PANASONIC TZ 170/180

0446

PANASONIC TZ140 0466

PANASONIC TZ150/160

0456

PARAGON 0386

PHILIPS 0036, 0216, 0306,

0316, 0326, 0336,

0346

PIONEER 0006, 0086

PIONEER BR50 0846

PIONEER BR60/70/80/81/82

0696

PIONEER BR90 0556

PULSAR 0386

RCA DIGITAL SATELLITE

SYSTEM 0396, 0406

REALISTIC 0136

REGENCY/EASTERN 0686

RUNCO 0386

SAMSUNG 0276

SCIENTIFIC ATLANTA 175/475

0576

SCIENTIFIC ATLANTA 75

0366, 0586

SCIENTIFIC ATLANTA 8650

0566

SIGNAL 0276

SL MARX 0276

SPECTAVISION0236

STANDARD COMPONENTS

0186

STARCOM V 0256

STARGATE 0276

SYLVANIA/TEXSCAN

0376, 0496

TEKNIKA 0176

TELESERVICE 0056

TELEVIEW 0276

TEXSCAN 0186, 0376

TFC 0026

TOCOM 0226, 0356

TOCOM 5503A 0526

TOCOM 5503VIP/5507 0516

TOCOM TC56 0506

TOSHIBA 0386

TUDI 0046

UNIKA 0136

UNIVERSAL 0136, 0156, 0206,

0286

VIDEOWAY 0096

VIEWSTAR 0216

ZENITH 0246, 0386, 0486

SATELLITE TUNER

ALPHA STAR 0826

CHAPARRAL 0756

ECHOSTAR 0836

GENERAL INSTRUMENT

0776, 0876

HTS 0836

HUGHES NETWORK SYSTEMS

0816

JERROLD 0776, 0786

PANASONIC 0806

PRIMESTAR 0776, 0786

RCA 0766

SONY 0796

(DBS)

HITACHI 0856

MAGNAVOX 0886

MEMOREX 0886

PANASONIC 0896

PHILIPS 0886

SONY 0906

STAR CHOICE 0876

TOSHIBA 0866, 0916

UNIDEN 0886

VCR

A TANDY 0902

ADVENTURA 0992

AIKO 0982

AIWA 0992

AKAI 0262, 0942, 0952,

0962, 0972

AMERICAN HIGH 0932

AMSTRAD 0992

ASA 0002, 0912

ASHA 0922

AUDIO DYNAMICS 0202

AUDIOVOX 0912

BEAUMARK 0922

BELL & HOWELL 0902

BLAUPUNKT 0412

BROKSONIC 0872, 0882, 0892

BUSH 0852

CALIX 0912

CANON 0862, 0932

CCE 0852, 0982

CITIZEN 0912, 0982

COLT 0852

CRAIG 0832, 0842, 0852,

0912, 0922

CURTIS MATHES 0662, 0822,

0932

CYBERNEX 0922

DAEWOO 0802, 0812, 0982

DBX 0202

DYNATECH 0472, 0992

ELECTROHOME 0912

ELECTROPHONIC 0912

EMEREX 0792

EMERSON 0072, 0132, 0142,

0152, 0162, 0172,

0182, 0192, 0212,

0702, 0712, 0722,

0732, 0742, 0752,

0762, 0772, 0782,

0872, 0882, 0892,

0912, 0952, 0992,

1072

FINLUX 0002, 0992

FISHER 0682, 0692, 0842,

0902

FUJI 0672, 0932

FUNAI 0992

GARRARD 0992

GE 0662, 0822, 0932

GO VIDEO 0642, 0652

GOODMANS 0402

GRADIENTE 0992

GRANDA 0612, 0902

GRUNDIG 0002

HARLEY DAVIDSON

0992

0111RX-V540440_code.p65 02.12.20, 3:31 PM3

III

HARMAN/KARDON

0632, 1082

HARWOOD 0752, 0852

HEADQUARTER 0612

HI-Q 0842

HINARI 0852

HITACHI 0102, 0562, 0572,

0582, 0592, 0602,

0992

ITT 0942

JVC (VICTOR) 0202, 0522, 0532,

0542, 0552

KENWOOD 0202, 0542, 0612,

0632, 0902

KLH 0852

KODAK 0912, 0932

LG (GOLDSTAR) 0082, 0632,

0912

LLOYD 0992

LOGIK 0852

LUXOR 0942

LXI 0022, 0912

MAGNAVOX 0002, 0482, 0492,

0502, 0512, 0932

MAGNIN 0922

MARANTZ 0002, 0202, 0402,

0632, 0932

MARTA 0912

MATSUSHITA 0932

MATSUI 0722

MEI 0222, 0932

MEMOREX 0232, 0242, 0472,

0512, 0612, 0842,

0902, 0912, 0922,

0932, 0992

MGA 0762, 0952

MGA TECHNOLOGY

0922

MINOLTA 0592, 0602

MITSUBISHI 0452, 0462, 0542,

0762, 0952, 1082

MOTOROLA 0472, 0932

MTC 0922, 0992

MULTITECH 0852, 0992

NAD 0442

NEC 0122, 0202, 0292,

0422, 0432, 0542,

0632

NIKKO 0912

NOBLEX 0922

OLYMPUS 0412, 0932

OPTIMUS 0442, 0472, 0912

OPTONICA 0402

ORION 0212, 0722, 0742,

0772

OSAKI 0912

PANASONIC 0012, 0052, 0092,

0222, 0372, 0382,

0392, 0412, 0932

PENNY 0202, 0432, 0602,

0632, 0692, 0912,

0922, 0932

PENTAX 0592, 0602

PERDIO 0992

PHILCO 0002, 0932

PHILIPS 0002, 0282, 0402,

0492, 0932

PILOT 0912

PIONEER 0442, 0542

PROSCAN 1002, 1012, 1022,

1032, 1042, 1052,

1062

PULSAR 0512

QUARTER 0612

QUARTZ 0272, 0612

QUASAR 0382, 0392, 0932

RADIO SHACK 0912, 0992

RADIX 0912

RANDEX 0912

RCA 0112, 0382, 0392,

0482, 0592, 0602,

0662, 0822, 0942

REALISTIC 0402, 0472, 0612,

0682, 0842, 0902,

0912, 0922, 0932,

0992

RICOH 0352, 0362

SAISHO 0212, 0582, 0722,

0732, 0742, 0772

SALORA 0612, 0762

SAMSUNG 0212, 0312, 0922,

0962

SANKY 0472, 0512

SANSUI 0292, 0542, 0832

SANYO 0242, 0612, 0842,

0902, 0922

SBR 0002, 0282

SCHEIDER 0852

SCOTT 0342, 0712, 0762,

0872, 0882, 0892

SEARS 0302, 0592, 0602,

0612, 0682, 0692,

0842, 0902, 0912,

0932

SHARP 0402, 0472

SHINTOM 0852

SHOGUN 0922

SINGER 0852

SONY 0032, 0332, 0352,

0362, 0672, 0792,

0932

STS 0602

SUNPAK 0352

SYLVANIA 0002, 0492, 0502,

0762, 0932, 0992

SYMPHONIC 0992

TANDY 0992

TASHIKO 0712, 0992

TEAC 0992

TECHNICS 0932

TEKNIKA 0322, 0912, 0932,

0992

TELEFUNKEN 0252

TMK 0212, 0732, 0772,

0922

TOSHIBA 0062, 0302, 0342,

0622, 0682, 0712,

0762

TOTEVISION 0912, 0922

UNITECH 0922

VECTOR RESEARCH

0202, 0432, 0632

VIDEO CONCEPTS

0202, 0432, 0632,

0952

WARDS 0322, 0402, 0472,

0482, 0602, 0712,

0842, 0852, 0922,

0932, 0992

YAMAHA 0202, 0632

ZENITH 0042, 0362, 0512,

0672

DVD PLAYER

AKAI 0058

AIWA 0218

DENON 0188

HITACHI 0198

JVC (VICTOR) 0088, 0178

KENWOOD 0148

LG (GOLDSTAR) 0228

MAGNAVOX 0128

MITSUBISHI 0138

ONKYO 0068, 0128

PANASONIC 0028

PHILIPS 0098, 0128

PIONEER 0108, 0118

PROSCAN 0158

RCA 0158

SAMSUNG 0078

SHARP 0038

SONY 0018

TECHNICS 0028

THOMSON 0168

TOSHIBA 0048, 0128

YAMAHA 0008, 0028, 0098,

0208

ZENITH 0128

LD PLAYER

AIWA 0157

DENON 0147

DISCO VISION 0017

FUNAI 0157

HITACHI (E) 0017

KENWOOD 0087, 0107

MAGNAVOX 0027

MARANTZ 0027

MITSUBISHI 0137

NAD 0137

PANASONIC 0077, 0177

PHILIPS 0027

PIONEER 0017, 0037, 0137

RCA 0167

REALISTIC 0157

SHARP 0127

SONY 0047, 0057, 0117

VICTOR 0097

YAMAHA 0007, 0067

CD PLAYER

ACOUSTIC RESEARCH

1295

ADC 0025, 0065

ADCOM 0205, 0255, 1015

ADS 0265

AIWA 0295, 0945, 1035,

1055

AKAI 0175, 0485, 0535

ALPINE 1215, 1305

AUDIO-TECHNICA 0545

BSR 0245, 0655, 0775

CALIFORNIA AUDIO LAB

0055

CAPETRONIC 1205

CARRERA 0245

CARVER 0285, 1135

CASIO 0345

CROWN 0185

CURTIS MATHES 0345

DENON 0275, 0875, 0885

DEUAL (E) 0505

DYNAMIC BASS (H)

0555

EMERSON 0205, 0325, 1105

EROICA 1275

FISHER 0095, 0555, 0925,

1005

GARRARD 0365

GENEXXA 0305, 0325, 1105

HARMAN/KARDON

0105, 0175,

0465, 0995

HITACHI 0195, 0205, 0505,

0815

INKEL 0115, 0395

JVC (VICTOR) 0315

KENWOOD 0045, 0095, 0405,

0585, 0725, 0735,

0745, 0755, 0895

KYOCERA 0025

LG (GOLDSTAR) 1135, 1225,

1265, 1335

LUXMAN 0075, 0425, 0675,

0705, 0715, 0985

MAGNAVOX 0165, 0215, 0645,

0955

MARANTZ 0215, 0235, 0375,

0785, 1345

MCINTOSH 0355, 1085

MCS 0905, 1315

MEMOREX 0205, 0225, 0235,

0305, 0325, 1105

MGA 0135

MISSION 0215

MITSUBISHI 0135, 0445

MTC 1255

NAD 0035, 0615, 0685,

0695

NAKAMICHI 0125, 0435, 0515

NEC 0255, 0905, 0965

NIKKO 0545, 1005

ONKYO 0155, 0455, 0495,

0805, 1155

OPTIMUS 0225, 0245, 0555,

0595, 0845, 0855,

0865, 0895, 0935

PANASONIC 0055, 0825, 1095,

1125

PENNY 0905

PHILIPS 0165, 0215

PIONEER 0305, 0935, 1045

PROTON 0215, 1185

QUASAR 0055

RCA 0205, 0915, 1115

REALISTIC 0205, 0225, 0235,

0325, 0555, 0845

REVOX 1175

ROTEL 0215

SABA TELECOMMANDER (E)

0505

SAE 0215

SAMSUNG 1285

SANSUI 0215, 0625, 0975,

1025, 1105

0111RX-V540440_code.p65 02.12.20, 3:31 PM4

SANYO 0145, 0555, 0635,

0765

SCOTT 0325, 1105

SEARS 0345

SHARP 0235, 0665, 0895,

1065, 1075

SHERWOOD 0115, 0235, 0395,

0475

SIEMENTS GARRARD

1245

SIGNATURE 0175

SONTEC 1165

SONY 0065, 0565, 0865,

1145

STARON 1235

STS 0025

SYLVANIA 0215

SYMPHONIC 0335

TANDY 0305

TANGBERG 1195

TEAC 0235, 0335, 0385,

0525, 0795, 0835,

1355

TECHNICS 0055, 0605, 1095

TECHWOOD 1325

TELEFUNKEN (E) 0505

THOMSON (E) 0505

TOSHIBA 0035, 0685

VECTOR RESEARCH

0065, 1135

WARDS 0175

YAMAHA 0005, 0015, 0085,

0415, 0545, 0575,

1065

CD RECORDER/CD-

HITACHI 0474

JVC (VICTOR) 0504

MARANTZ 0484, 0494

PHILIPS 0444

PIONEER 0454

YAMAHA 0414

MD RECORDER

KENWOOD 0384

PIONEER 0424

SHARP 0434

SONY 0394

YAMAHA 0024, 0394, 0404,

0514

TAPE DECK

AIWA 0094, 0214, 0224

AKAI 0184

CARVER 0094

DENON 0304

FISHER 0144

GARRARD 0194, 0204

JVC (VICTOR) 0274, 0284, 0294

KENWOOD 0124, 0134, 0154,

0234, 0244, 0264

MAGNAVOX 0094

MARANTZ 0094, 0344

MITSUBISHI 0184

OPTIMUS 0034, 0064, 0204,

0334

ONKYO 0364, 0374

PHILIPS 0094

PIONEER 0034, 0044, 0064

REVOX 0354

SANSUI 0094, 0344

SHARP 0264

SHERWOOD 0334

SONY 0054, 0084, 0324

TEAC 0194, 0254

TECHNICS 0074, 0314

WARDS 0034

YAMAHA 0004, 0014, 0104,

0114, 0164, 0174,

0264

0111RX-V540440_code.p65 02.12.20, 3:31 PM5

Printed in Malaysia WA72720

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

0100RX-V540440-cv4_EN-U.p65 02.12.20, 3:22 PM1

Yamaha RX-V440 Handleiding

Merk: Yamaha

Model: RX-V440

Categorie: AV-ontvangers

Type: Handleiding

Deze handleiding is ook geschikt voor

RX-V540

Download PDF

rapport

in andere talen

English: Yamaha RX-V440 User manual
italiano: Yamaha RX-V440 Manuale utente
русский: Yamaha RX-V440 Руководство пользователя
français: Yamaha RX-V440 Manuel utilisateur
español: Yamaha RX-V440 Manual de usuario
Deutsch: Yamaha RX-V440 Benutzerhandbuch
português: Yamaha RX-V440 Manual do usuário
dansk: Yamaha RX-V440 Brugermanual
suomi: Yamaha RX-V440 Ohjekirja
čeština: Yamaha RX-V440 Uživatelský manuál
svenska: Yamaha RX-V440 Användarmanual
Türkçe: Yamaha RX-V440 Kullanım kılavuzu
polski: Yamaha RX-V440 Instrukcja obsługi
română: Yamaha RX-V440 Manual de utilizare

Andere documenten

Pioneer DJ RM-07 Handleiding

Yamaha RX-V440 Handleiding

Deze handleiding is ook geschikt voor

Yamaha RX-V440 Handleiding

in andere talen

Gerelateerde artikelen

Andere documenten