Yamaha HTR-5630 Handleiding

Merk: Yamaha

Model: HTR-5630

Categorie: AV-ontvangers

Type: Handleiding

Deze handleiding is ook geschikt voor

HTR-5640

OWNER’S MANUAL

HTR-5630

AV Receiver

0100V340(U)-cv1 03.3.10, 3:54 PM1

I CAUTION

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to alert

you to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert you to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

1 Read Instructions – All the safety and operating instructions

should be read before the product is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the product and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and use instructions

should be followed.

5 Cleaning – Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

6 Attachments – Do not use attachments not recommended

by the product manufacturer as they may cause hazards.

7 Water and Moisture – Do not use this product near water –

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool;

and the like.

8 Accessories – Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall,

causing serious injury to a child or adult, and serious

damage to the product. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the product. Any mounting of the product should

follow the manufacturer’s instructions, and should use a

mounting accessory recommended by the manufacturer.

9 A product and cart combination should be

moved with care. Quick stops, excessive

force, and uneven surfaces may cause the

product and cart combination to overturn.

10 Ventilation – Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should not

be placed in a built-in installation such as a bookcase or

rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

11 Power Sources – This product should be operated only from

the type of power source indicated on the marking label. If

you are not sure of the type of power supply to your home,

consult your product dealer or local power company. For

products intended to operate from battery power, or other

sources, refer to the operating instructions.

12 Grounding or Polarization – This product may be equipped

with a polarized alternating current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

13 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

14 Lightning – For added protection for this product during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line

surges.

15 Power Lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touching

such power lines or circuits as contact with them might be

fatal.

16 Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result

in a risk of fire or electric shock.

17 Object and Liquid Entry – Never push objects of any kind

into this product through openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on

the product.

18 Servicing – Do not attempt to service this product yourself

as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19 Damage Requiring Service – Unplug this product from the

wall outlet and refer servicing to qualified service personnel

under the following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into

the product,

c) If the product has been exposed to rain or water,

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

0101RX-V340_Cau_EN-U.p65 03.3.28, 11:53 AM2

CAUTION II

1. IMPORTANT NOTICE : DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved

by Yamaha may void your authority, granted by the

FCC, to use the product.

2. IMPORTANT : When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation

instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE : This product has been tested and found to

comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a

reasonable level of assurance that your use of this

product in a residential environment will not result in

harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and,

if not installed and used according to the instructions

found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee

that interference will not occur in all installations. If

this product is found to be the source of interference,

which can be determined by turning the unit “OFF” and

“ON”, please try to eliminate the problem by using one

of the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon

lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810–20)

GROUNDING CONDUCTORS

(NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC

– NATIONAL ELECTRICAL CODE

FCC INFORMATION (for US customers)

Note to CATV system installer:

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the

grounding system of the building, as close to the point of

cable entry as practical.

d) If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its normal

operation,

e) If the product has been dropped or damaged in any

way, and

f) When the product exhibits a distinct change in

performance - this indicates a need for service.

20 Replacement Parts – When replacement parts are

required, be sure the service technician has used

replacement parts specified by the manufacturer or have

the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric

shock, or other hazards.

21 Safety Check – Upon completion of any service or

repairs to this product, ask the service technician to

perform safety checks to determine that the product is in

proper operating condition.

22 Wall or Ceiling Mounting – The unit should be mounted

to a wall or ceiling only as recommended by the

manufacturer.

23 Heat – The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

24 Outdoor Antenna Grounding – If an outside antenna or

cable system is connected to the product, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA

70, provides information with regard to proper grounding of

the mast and supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit, connection

to grounding electrodes, and requirements for the

grounding electrode.

0101RX-V340_Cau_EN-U.p65 03.3.28, 11:53 AM3

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool,

dry, clean place — away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 30 cm on the top,

20 cm on the left and right, and 20 cm on the back

of this unit.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in a environment with high humidity (i.e. a room with

a humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage to

this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed

to liquid dripping or splashing. On the top of this

unit, do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

–

Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the

user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation.

If the temperature inside this unit rises, it may

cause fire, damage to this unit, and/or personal

injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

To prevent damage by lightning, disconnect the power

cord from the wall outlet during an electrical storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set

this unit in standby mode, and disconnect the AC

power plug from the wall outlet.

VOLTAGE SELECTOR (General model only)

The VOLTAGE SELECTOR on the rear panel of this

unit must be set for your local main voltage

BEFORE plugging into the AC main supply.

Voltages are 110V-120V, 220V-240V AC, 50/60 Hz.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet,

even if this unit itself is turned off. This state is called

standby mode. In this state, this unit is designed to

consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

IMPORTANT

Please record the serial number of this unit in the

space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

III CAUTION

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer

Electronics Group want you to get the most out of your equipment

by playing it at a safe level. One that lets the sound come through

loud and clear without annoying blaring or distortion – and, most

importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often

undetectable until it is too late, YAMAHA and the

Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid

prolonged exposure from excessive volume levels.

0101RX-V340_Cau_EN-U.p65 03.4.1, 4:14 PM4

English

INTRODUCTION

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

CONTENTS

INTRODUCTION

CONTENTS ............................................................ 1

FEATURES ............................................................. 2

GETTING STARTED ............................................ 3

Supplied accessories .................................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel ................................................................. 4

Remote control .......................................................... 6

Front panel display .................................................... 8

PREPARATION

CONNECTIONS .................................................... 9

Before connecting components ................................. 9

Connecting video components ................................ 10

Connecting audio components ................................ 11

Connecting the antennas .......................................... 12

Connecting an external decoder .............................. 13

Connecting the speakers .......................................... 14

Connecting the power supply cords ........................ 17

Turning on the power .............................................. 17

BASIC SYSTEM SETTINGS ............................. 18

Using the basic menu .............................................. 18

Setting the unit to match your speaker system ........ 20

Setting speaker output levels (SP LEVEL) ............. 20

BASIC OPERATION

PLAYBACK .......................................................... 21

Input modes and indications .................................... 23

Selecting a sound field program .............................. 24

DIGITAL SOUND FIELD PROCESSING (DSP)

............................................................................ 27

Understanding sound fields ..................................... 27

Hi-Fi DSP programs ................................................ 27

CINEMA-DSP ...................................................... 28

Sound design of CINEMA-DSP ............................. 28

CINEMA-DSP Programs ........................................ 28

Sound field effects ................................................... 30

TUNING ................................................................ 31

Presetting stations .................................................... 32

Selecting a preset station ......................................... 34

SLEEP TIMER ..................................................... 35

RECORDING ....................................................... 36

ADVANCED OPERATION

SET MENU ........................................................... 37

Set menu list ............................................................ 37

Adjusting the items on the set menu ....................... 37

SOUND 1 SPEAKER SET (speaker mode settings)

............................................................................. 38

SOUND 2 SP DISTANCE (speaker distance) ........ 40

SOUND 3 LFE LEVEL .......................................... 40

SOUND 4 D. RANGE (dynamic range) ................. 40

SOUND 5 CENTER GEQ

(center graphic equalizer) .................................... 41

SOUND 6 HP TONE CTRL

(headphone tone control) .................................... 41

INPUT 1 I/O ASSIGN (input/output assignment) .. 41

INPUT 2 INPUT MODE (initial input mode) ........ 41

OPTION 1 DISPLAY SET ...................................... 42

OPTION 2 MEM. GUARD (memory guard) ......... 42

OPTION 3 AUDIO MUTE ..................................... 42

REMOTE CONTROL FEATURES ................... 43

Control area ............................................................. 43

Setting the manufacturer code ................................. 44

Controlling other components ................................. 45

SETTING THE SPEAKER LEVELS ................ 46

Adjusting the volume during playback ................... 46

Using the test tone ................................................... 46

ADDITIONAL INFORMATION

SOUND FIELD PROGRAM PARAMETER

EDITING .......................................................... 47

Changing parameter settings ................................... 47

Digital sound field parameter descriptions .............. 48

TROUBLESHOOTING ....................................... 49

GLOSSARY .......................................................... 52

SPECIFICATIONS .............................................. 54

0103V340R_01-08_EN(U).p65 03.4.2, 4:27 PM1

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are

trademarks of Dolby Laboratories.

FEATURES

Multi-mode digital sound field processing

◆ Dolby Pro Logic/Dolby Pro Logic II decoder

◆ Dolby Digital/Dolby Digital + Matrix 6.1 Decoder

◆ DTS/DTS + Matrix 6.1 Decoder

◆ CINEMA DSP: Combination of YAMAHA DSP

technology and Dolby Pro Logic, Dolby Digital or

DTS

◆ Virtual CINEMA DSP

◆ SILENT CINEMA DSP

Sophisticated AM/FM Tuner

◆ 40-Station random access preset tuning

◆ Automatic preset tuning

◆ Preset station shifting capability (Preset editing)

Other features

◆ 96 kHz/24-bit D/A converter

◆ Set menu for optimizing this unit for your Audio/

Video system

◆ Test tone generator for easier speaker balance

adjustment

◆ 6-channel external decoder input

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Remote control with preset manufacturer codes

“DTS” and “DTS Digital Surround” are registered

trademarks of Digital Theater Systems, Inc.

Built-in 5-channel power amplifier

◆ Minimum RMS output power

(0.1% THD, 1 kHz, 6Ω)

[U.S.A. and Canada models]

Main: 70 W + 70 W

Center: 70 W

Rear: 70 W + 70 W

[Other models]

Main: 60 W + 60 W

Center: 60 W

Rear: 60 W + 60 W

■ About this manual

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases

when the button names differ between the main unit and the remote control, the button name on the remote control is

given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part for the reason of

the improvement in operativity ability, and others. In this case, the product has priority.

0103V340R_01-08_EN(U).p65 03.3.28, 11:54 AM2

English

INTRODUCTION

Installing batteries in the remote

control

Insert the batteries in the correct direction by aligning the

+ and – marks on the batteries with the polarity markings

(+ and –) inside the battery compartment.

1 Press the part marked with a and slide off

the battery compartment cover.

2 Insert the two batteries supplied (AA, R06,

UM-3) according to the polarity markings on

the inside of the battery compartment.

3 Slide the cover back on so that it snaps into

place.

■ Notes on batteries

• Change all of the batteries if you notice a decrease in

the operating range of the remote control.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline

and manganese batteries) together. Read the packaging

carefully as these different types of batteries may have

the same shape and color.

• If the batteries have leaked, dispose of them

immediately. Avoid touching the leaked material or

letting it come into contact with clothing, etc. Clean the

battery compartment thoroughly before installing new

batteries.

If the remote control is without batteries for more than

2 minutes, or if exhausted batteries remain in the

remote control, the contents of the memory may be

cleared. When the memory is cleared, insert new

batteries, set up the manufacturer code and program

any acquired functions that may have been cleared.

AM loop antenna (Europe, U.K., Australia and

Singapore models)

Indoor FM antenna

(U.S.A., Canada, China,

Korea and General models)

Batteries (2)

(AA, R06, UM-3)

Remote control

GETTING STARTED

Supplied accessories

After unpacking, check that the following parts are contained.

SYSTEM

POWER

STANDBY

POWER

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

AMP

CODE SET

MUTE

INPUTMUTE

REC

6CH INPUT

AUDIO

DISC SKIP

VOLUME

–

CHVOL

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

0103V340R_01-08_EN(U).p65 03.3.28, 11:54 AM3

CONTROLS AND FUNCTIONS

Front panel

1 STANDBY/ON

Turns the unit on, or sets it in standby mode. When you

turn the unit on, you will hear a click and there will be a 4

to 5-second delay before it can reproduce sound.

Standby mode

In this mode, the unit uses a small amount of power in

order to receive infrared-signals from the remote

control.

2 Remote control sensor

Receives signals from the remote control.

3 Front panel display

Shows information about the operational status of the

unit.

4 TUNING MODE (AUTO/MAN’L MONO)

Switches the tuning mode between automatic and manual.

5 PRESET/TUNING (EDIT)

Switches the function of PRESET/TUNING l / h

between selecting a preset station number and tuning (the

colon (:) turns on or off).

This button is also used to exchange the assignment of

two preset stations with each other.

6 FM/AM

Switches the reception band between FM and AM.

7 MEMORY (MAN’L/AUTO FM)

Stores the current station in memory.

8 VOLUME

Controls the output level of all audio channels.

This does not affect the OUT (REC) level.

SILENT (PHONES jack)

Allows you to enjoy DSP effects when listening with

headphones.

Inserting the plug from your headphones into the

PHONES jack does not affect the sound output from the

speakers. If you wish to stop the signal output to the

speakers, press SPEAKERS ON/OFF so that it is in the

OFF position.

0 SPEAKERS ON/OFF

Turns on or off the speakers that you selected by

SPEAKERS A/B.

q SPEAKERS A/B

Selects the set of main speakers connected to the A or B

terminals.

(U.K. and Europe models only)

VOLUME

STANDBY

/ON

MODE START

PTY SEEK

RDS MODE/FREQ EON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

12 543 67 8

a s fd

MODE START

RDS MODE/FREQ

PTY SEEK

EON

9 0 q w r iute po

0103V340R_01-08_EN(U).p65 03.3.28, 11:54 AM4

English

INTRODUCTION

w STEREO (EFFECT)

Switches between normal stereo and DSP effect

reproduction. When you select STEREO, the unit mixes

down all Dolby Digital and DTS signals (except the LFE

channel) as well as those 2-channel signals without

effects, to the main left and right speakers.

e PROGRAM l / h

Select the DSP program.

r A/B/C/D/E

Selects preset station groups A to E when the unit is in

tuner mode.

Selects the set menu mode when the unit is not in tuner

mode.

t PRESET/TUNING l / h

Select preset station numbers 1 to 8 when a colon (:) is

displayed in the front panel display.

Select the tuning frequency when a colon (:) is not

displayed when the unit is in tuner mode.

SET MENU –/+

Adjust settings on the set menu when the unit is not in

tuner mode.

y CONTROL

Switches between Bass (low-frequency response) control

mode and Treble (high-frequency response) control mode.

u BASS/TREBLE –/+

Increase or decrease low/high-frequency response when

the unit is in Bass/Treble control mode. The sound

changes 2dB each time you press one of these buttons.

Control range: –10 to +10dB.

i INPUT MODE

Sets the priority for the types of input signals (AUTO,

DTS, ANALOG) received when one component is

connected to two types of input jacks. You cannot set

priority for an audio sources if you have selected 6CH

INPUT as the input source.

o INPUT l / h

Selects the input source you want to listen to or watch.

p 6CH INPUT

Selects the audio source connected to the 6CH INPUT

jacks. This selection takes priority over sources selected

with INPUT (or the input selector buttons on the remote

control).

(U.K. and Europe models only)

a RDS MODE/FREQ

Press this button when the unit is receiving an RDS

station, to cycle the display mode among PS mode,

PTY mode, RT mode, CT mode (if the station offers

those RDS data service) and/or frequency display

mode in turn.

s PTY SEEK MODE

Press this button to set the unit in the PTY SEEK

mode.

d PTY SEEK START

Press this button to begin searching for a station after

the desired program type has been selected in the PTY

SEEK mode.

f EON

Press this button to select a radio program type

(NEWS, INFO, AFFAIRS, SPORT) to tune in

automatically.

CONTROLS AND FUNCTIONS

0103V340R_01-08_EN(U).p65 03.3.28, 11:54 AM5

SYSTEM

POWER

STANDBY

POWER

ENTER

+10

STEREO /DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

AMP

CODE SET

MUTE

INPUTMUTE

REC

6CH INPUT

AUDIO

DISC SKIP

VOLUME

–

CHVOL

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

6.1/5.1

NIGHT

Remote control

1 Infrared emitter

Outputs infrared control signals. Aim this emitter at the

component you want to operate.

2 Input selector buttons

Select the input source and set the remote control to

operate the selected source component.

3 DSP program

Select DSP programs when the remote control is in AMP

mode. Press one of these buttons repeatedly to select a

DSP program within a program group.

4 LEVEL

Selects the effect speaker channel to adjust.

5 Multi control section

Used to change and implement settings.

6 TEST

Outputs a test tone for use when adjusting the speaker

levels.

7 STANDBY

Sets this unit in standby mode.

8 SYSTEM POWER

Turns on the power of the unit.

9 SLEEP

Sets the sleep timer.

0 6CH INPUT

Selects the audio source connected to the 6CH INPUT

jacks.

q CODE SET

Used to set up manufacturer codes (see page 44).

w AMP

Switches control from a previously selected component

by using the input selector buttons to this unit.

e VOLUME +/–

Increases or decreases the volume level.

CONTROLS AND FUNCTIONS

This section describes the controls and functions of the

remote control when it is set in AMP mode. Please make

sure to select AMP mode before beginning operation.

0103V340R_01-08_EN(U).p65 03.3.28, 11:54 AM6

English

INTRODUCTION

Approximately 6 m (20 feet)

■ Using the remote control

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the main unit during operation.

■ Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– high humidity or temperature such as near a heater,

stove or bath;

– dusty places; or

– in places subject to extremely low temperatures.

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

SYSYTEM

POWER

STANDBY

POWER

ENTER

+10

STEREO

MATRIX 6.1

SELECT

/DTS

8765

MOVIE THTR

MONO MOVIETV SPORTS

432

ENTERTAINMENT

ROCKJAZZHALL

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

AMP

CODE SET

MUTE

INPUTMUTE

REC

6CH INPUT

AUDIO

DISC SKIP

VOLUME

–

CHVOL

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

30° 30°

CONTROLS AND FUNCTIONS

r MUTE

Mutes the sound. Press again to restore the audio output

to the previous volume level.

t 6.1/5.1

Switches on or off the Dolby Digital + Matrix 6.1 or DTS

+ Matrix 6.1 decoder.

y STEREO

Switches between normal stereo and DSP effect

reproduction. When you select STEREO the unit mixes

down all Dolby Digital and DTS signals (except the LFE

channel) as well as those 2-channel signals without effect

sounds, to the main left and right speakers.

u NIGHT

Sets the unit in night listening mode.

i SET MENU

Selects the set menu mode.

0103V340R_01-08_EN(U).p65 03.3.28, 11:54 AM7

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

MATRIX

DIGITAL

PCM

SILENT

DSP

HiFi

NIGHT

VIRTUAL

AUTO

STEREO

SLEEP

VOLUME

MUTE

MEMORYTUNED

L C R

RLLFE RC RR

~~~~~~~~~~~~~~

CTRTPTYPS

HOLDPTYEON

90qw yer uiop

1 Processor indicators

The indicators for the various decoders light up when the

decoders are in use.

2 VIRTUAL indicator

Lights up when using Virtual CINEMA DSP.

3 Headphones indicator

Lights up when headphones are connected to the

headphone jack.

4 Input source indicator

Highlights the current input source with a cursor.

5 Sound field indicator

Displays the sound field management the unit is using

when you listen to a DSP sound field program.

6 AUTO indicator

Shows that this unit is in the automatic tuning mode.

7 MUTE indicator

Flashes while the MUTE function is on.

8 VOLUME level indicator

Indicates the volume level.

9 PCM indicator

Lights up when this unit is reproducing PCM (pulse code

modulation) digital audio signals.

0 SILENT indicator

Lights up when headphones are connected and the digital

sound field processor is on.

q Multi-information display

Shows the current DSP program name and other

information when you are adjusting or changing settings.

w NIGHT indicator

Lights up when the unit is set to night listening mode.

e HiFi DSP indicator

Lights up when you select a Hi-Fi DSP sound field

program.

r CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound field

program.

t STEREO indicator

Lights up when the unit is receiving a strong signal from

a FM stereo broadcast while the “AUTO” indicator is lit.

y TUNED indicator

Lights up when this unit is tuned to a radio station.

u MEMORY indicator

Flashes to show a station can be stored in memory.

i SLEEP indicator

Lights up while the sleep timer is on.

o LFE indicator

Lights up when the input signal contains an LFE signal.

p Input channel indicator

The indicators for the appropriate sound channels light up

when a digital signal from a source is played back.

a RDS indicator (U.K. and Europe models only)

The name(s) of the RDS data offered by the currently

received RDS station light(s) up.

EON indicator lights up when an RDS station that offers

the EON data service is being received.

PTY HOLD indicator lights up while searching for

stations in the PTY SEEK mode.

Front panel display

(U.K. and Europe models only)

CONTROLS AND FUNCTIONS

0103V340R_01-08_EN(U).p65 03.3.28, 11:54 AM8

English

PREPARATION

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the

mains power until all connections between the

components have been completed.

• Be sure all connections are made correctly, that is to

say L (left) to L, R (right) to R, “+” to “+” and “–” to

“–”. Some components require different connection

methods and have different jack names. Refer to the

operation instructions for each component you wish to

connect to this unit.

• After you have completed all connections, check them

again to make sure they are correct.

• The jack names correspond to the names on the input

selector.

■ Connecting to digital jacks

This unit has digital jacks for direct transmission of

digital signals through either a coaxial or fiber optic

cable. You can use the digital jacks to input PCM, Dolby

Digital and DTS bitstreams. Use digital connections if

you wish to enjoy the multi-channel sound track of DVD

material, etc. with DSP effects. Both digital input jacks

are acceptable for 96 kHz sampling digital signals.

Note

• The OPTICAL jack on this unit conform to the EIA standard.

If you use a fiber optic cable that does not conform to this

standard this unit may not function properly.

6CH INPUT jacks

(page 13)

DIGITAL INPUT jacks

(pages 9 – 11)

Antenna input terminals

(page 12)

Speaker terminals

(page 16)

Video component jacks

(page 10)

Audio component jacks

(page 11)

SUBWOOFER OUTPUT

jack (page 16)

This jack is reserved for factory use.

Do not connect any equipment to this jack.

AUDIO

AUDIO VIDEO TUNER SPEAKERS

CLASS 2 WIRING

CD DVD

MAIN

REAR

(

SURROUND

)

CENTER

ANT

GND

ANT

(PLAY)

MAIN

DVD

DIGITAL

INPUT

SUB

WOOFER

CENTER

SUB

WOOFER

MONITOR

OUT

SURROUND

OPTICAL

COAXIAL

OUT

(REC)

/CD-R

D-TV

/CBL

V-AUX

VCR

OUT

6CH INPUT OUTPUT

75Ω UNBAL.

MAIN A OR B : 6Ω MIN./SPEAKER

CENTER : 6Ω MIN./SPEAKER

REAR

: 6Ω MIN./SPEAKER

0104V340R_09-18_EN(U).p65 03.3.28, 11:54 AM9

AUDIO

AUDIO VIDEO TUNER

CD DVD

ANT

GND

ANT

(PLAY)

MAIN

DVD

DIGITAL

INPUT

SUB

WOOFER

CENTER

SUB

WOOFER

MONITOR

OUT

SURROUND

OPTICAL

COAXIAL

OUT

(REC)

/CD-R

D-TV

/CBL

V-AUX

VCR

OUT

6CH INPUT OUTPUT

75Ω UNBAL.

VIDEO

INPUT

AUDIO

OUTPUT

AUDIO

INPUT

OPTICAL

OUTPUT

VIDEO

OUTPUT

AUDIO

OUTPUT

V V

AUDIO

OUTPUT

L R

VIDEO

OUTPUT

AUDIO

OUTPUT

L R

VIDEO

OUTPUT

VIDEO

INPUT

VIDEO

OUTPUT

Connecting video components

■ Connecting a video monitor

Connect the video input jack on your video monitor to the

MONITOR OUT VIDEO jack.

■ Connecting a DVD player

Connect the optical digital audio signal output jack on

your component to the DIGITAL INPUT jack and

connect the video signal output jack on the component to

the VIDEO jack on this unit.

• Use the AUDIO jacks on this unit for a video component

which does not have optical digital output jack. However,

multi-channel reproduction cannot be obtained with audio

signals input from the AUDIO jacks.

■ Connecting a digital TV/cable TV

Connect the video signal output jack on your component

to the VIDEO jack on this unit.

Connect the audio signal output jacks on the component

to the AUDIO jacks on this unit.

■ Connecting another video component

Connect the video signal output jack on your component

to the VIDEO jack on this unit.

Connect the audio signal output jacks on the component

to the AUDIO jacks on this unit.

■ Connecting a recording component

Connect the audio signal input jacks on your video

component to the AUDIO OUT jacks on this unit. Then

connect the video signal input jack on the video

component to the VIDEO OUT jack on this unit for

picture recording.

Connect the audio signal output jacks on your component

to the AUDIO IN jacks on this unit. Then connect the

video signal output jack on the component to the VIDEO

IN jack on this unit to play a source from your recording

component.

Note

• Once you have connected a recording component to this unit,

keep its power turned on while using this unit. If the power is

off, this unit may distort the sound from other components.

indicates right analog cables

indicates left analog cables

indicates audio signal direction

Video monitor

VCR

DVD player

TV/digital TV/

cable TV

CONNECTIONS

Another video

component

indicates optical cables

indicates video signal direction

indicates video cables

0104V340R_09-18_EN(U).p65 03.3.28, 11:54 AM10

English

PREPARATION

Connecting audio components

■ Connecting a CD player

Connect the coaxial digital output jack on your CD player

to the DIGITAL INPUT CD jack on this unit.

• Use the AUDIO jacks on this unit to connect to a CD player

that does not have a COAXIAL DIGITAL OUTPUT jack, or

to record from CD players.

■ Connecting a CD recorder or MD

recorder

Connect the input jacks on your CD recorder or MD

recorder to the MD/CD-R OUT (REC) jacks.

Connect the output jacks on your CD recorder or MD

recorder to the MD/CD-R IN (PLAY) jacks to play a

source from your recording component.

indicates right analog cables

indicates left analog cables

indicates signal direction

CD player

indicates coaxial cables

CD recorder or

MD recorder

CONNECTIONS

AUDIO

AUDIO VIDEO TUNER

CD DVD

ANT

GND

ANT

(PLAY)

MAIN

DVD

DIGITAL

INPUT

SUB

WOOFER

CENTER

SUB

WOOFER

MONITOR

OUT

SURROUND

OPTICAL

COAXIAL

OUT

(REC)

/CD-R

D-TV

/CBL

V-AUX

VCR

OUT

6CH INPUT OUTPUT

75Ω UNBAL.

AUDIO

INPUT

AUDIO

OUTPUT

AUDIO

OUTPUT

COAXIAL

OUTPUT

Note

• Once you have connected a recording component to this unit,

keep its power turned on while using this unit. If the power is

off, this unit may distort the sound from other components.

0104V340R_09-18_EN(U).p65 03.3.28, 11:54 AM11

■ Connecting the AM loop antenna

1 Set up the AM loop antenna, then connect it

to the terminals on this unit.

2 Press and hold the tab to insert the AM loop

antenna lead wires into the AM ANT and

GND terminals.

3 Orient the AM loop antenna for the best

reception.

Notes

• The AM loop antenna should be placed away from this unit.

• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

A properly installed outdoor antenna provides clearer

reception than an indoor one. If you experience poor

reception quality, an outdoor antenna may improve the

quality. Consult the nearest authorized YAMAHA

dealer or service center about the outdoor antennas.

FREQUENCY STEP switch

(General model only)

Because the inter-station frequency spacing differs in

different areas, set the FREQUENCY STEP switch

(located on the rear panel) according to the frequency

spacing in your area.

North, Central and South America: 100 kHz/10 kHz

Other areas: 50 kHz/9 kHz

Before setting this switch, disconnect the AC power

plug of this unit from the AC outlet.

Ground (GND terminal)

For maximum safety and minimum

interference, connect the antenna GND

terminal to a good earth ground. A good

earth ground is a metal stake driven into

moist earth.

Indoor FM

antenna

(included)

AM loop antenna

(included)

Connecting the antennas

Both AM and FM indoor antennas are included with this

unit. In general, these antennas should provide sufficient

signal strength.

Connect each antenna correctly to the designated

terminals.

CONNECTIONS

EO TUNER

ANT

GND

ANT

MONITOR

OUT

75Ω UNBAL.

50 kHz/ 9kHz

100 kHz/10kHz

FM/AM

FREQUENCY STEP

0104V340R_09-18_EN(U).p65 03.3.28, 11:54 AM12

English

PREPARATION

Connecting an external decoder

This unit is equipped with 6 additional input jacks (MAIN

left and right, CENTER, SURROUND left and right and

SUBWOOFER) for discrete multi-channel input from a

component equipped with a multi-channel decoder and 6

channel output jacks such as a DVD/SACD player.

Note

• When you select 6CH INPUT as the input source, the unit

automatically turns off the digital sound field processor, and

you cannot use DSP programs.

CONNECTIONS

DVD/SACD player

ANT

MAIN

DVD

DIGITAL

INPUT

SUB

WOOFER

CENTER

SUB

WOOFER

MONITOR

OUT

SURROUND

OPTICAL

COAXIAL

OUT

(REC)

/CD

V-AUX

VCR

OUT

6CH INPUT OUTPUT

75Ω UNBAL.

L R

SUBWOOFER MAIN

CENTER SURROUND

SUBWOOFER MAIN

CENTER SURROUND

0104V340R_09-18_EN(U).p65 03.3.28, 11:54 AM13

Connecting the speakers

■ Speakers

This unit has been designed to provide the best sound-

field quality with a 5-speaker system, using main left and

right speakers, rear left and right speakers and a center

speaker. If you use different brands of speakers (with

different tonal qualities) in your system, the tone of a

moving human voice and other types of sound may not

shift smoothly. We recommend that you use speakers

from the same manufacturer or speakers with the same

tonal quality.

The main speakers are used for the main source sound

plus effect sounds. They will probably be the speakers

from your present stereo system. The rear speakers are

used for effect and surround sounds. The center speaker is

for the center sounds (dialog, vocals, etc.).

The main speakers should be high-performance models

and have enough power-handling capacity to accept the

maximum output of your audio system. The other

speakers do not have to be equal to the main speakers. For

precise sound localization, however, it is ideal to use the

models of equivalent performance with the main

speakers.

Use of a subwoofer expands your sound field

It is also possible to further expand your system with the

addition of a subwoofer. The use of a subwoofer is

effective not only for reinforcing bass frequencies from

any or all channels, but also for reproducing the LFE

(low-frequency effect) channel with high fidelity when

playing back Dolby Digital or DTS signals. The

YAMAHA Active Servo Processing Subwoofer System is

ideal for natural and lively bass reproduction.

CONNECTIONS

■ Speaker placement

Refer to the following diagram when you place the

speakers.

Main speakers

Place the main left and right speakers an equal distance

from the ideal listening position. The distance between

each speaker and each side of the video monitor should

also be the same.

Center speaker

Align the front face of the center speaker with the front

face of your video monitor. Place the speaker as close to

the monitor as possible (such as directly over or under the

monitor) and centrally between the main speakers.

Rear speakers

Place these speakers behind your listening position,

facing slightly inwards, about 1.8 m (6 feet) above the

floor.

Subwoofer

The position of the subwoofer is not so critical, because

low bass sounds are not highly directional. However, it is

better to place the subwoofer near the main speakers.

Turn it slightly toward the center of the room to reduce

wall reflections.

Note

• If you do not use any of effect speakers (rear and/or center),

change the settings of “SOUND 1 SPEAKER SET” items at

the set menu to direct signals to other terminals you have

connected speakers to.

CAUTION

Use magnetically shielded speakers. If these speakers

still create interference with the monitor, place the

speakers away from the monitor.

Main

speaker (L)

1.8 m (6 feet)

Rear speaker (L)

Rear speaker (R)

Subwoofer

Main speaker (R)

Center speaker

0104V340R_09-18_EN(U).p65 03.3.28, 11:54 AM14

English

PREPARATION

10 mm (3/8”)

Red: positive (+)

Black: negative (–)

Banana plug

CONNECTIONS

■ Connections

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) in accordance with the markers on

this unit, the speakers, and the speaker cables. If the connections are faulty, no sound will be heard from the speakers,

and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

CAUTION

• Use speakers with the specified impedance shown on the rear panel of this unit.

• Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/

or the speakers.

A speaker cord is actually a pair of insulated cables

running side by side. One cable is colored or shaped

differently, perhaps with a stripe, groove or ridge.

1 Remove approximately 10 mm (3/8”) of

insulation from each of the speaker cables.

2 Twist the exposed wires of the cable

together to prevent short circuits.

1 Unscrew the knob.

2 Insert one bare wire into the hole in the side

of each terminal.

3 Tighten the knob to secure the wire.

(With the exception of U.K., Europe, Korea, and Singapore

models)

• You can also use banana plug connectors. First, tighten the

knob and then insert the banana plug connector into the end of

the corresponding terminal.

1 Press and open the tab.

2 Insert one bare wire into the hole of each

terminal.

3 Release the tab to secure the wire.

(With the exception of U.K., Europe, Korea, and

Singapore models)

Connecting to the MAIN A SPEAKERS terminals

Red: positive (+)

Black: negative (–)

Connecting to the MAIN B, CENTER and REAR SPEAKERS terminals

0104V340R_09-18_EN(U).p65 03.3.28, 11:54 AM15

Subwoofer

system

Main B speaker

Center

speaker

Right

Rear speaker

SUBWOOFER jack

When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System,

connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the

main, center and/or rear channels to this jack in accordance with your SPEAKER SET selections. The LFE (low-

frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance

with your SPEAKER SET selections.

Notes

• The cut-off frequency of the SUBWOOFER jack is 90 Hz.

• If you do not use a subwoofer, allocate the signals to the main left and right speakers by changing the setting of “SOUND 1

SPEAKER SET” item “1D BASS” on the set menu to MAIN.

• Use the control on the subwoofer to adjust its volume level. You can also adjust the volume level by using this unit’s remote control

(see “SETTING THE SPEAKER LEVELS” on page 46).

Right Left

Main A speaker

Right Left Left

MAIN SPEAKERS terminals

You can connect up to two speaker systems to these

terminals. When using only one speaker system, connect

it to either of the MAIN A or the MAIN B terminals.

REAR SPEAKERS terminals

A rear speaker system can be connected to these

terminals.

CENTER SPEAKER terminals

A center speaker can be connected to these terminals.

CONNECTIONS

The diagram shows the speaker layout in the listening

room.

AUDIO

AUDIO VIDEO TUNER SPEAKERS

CLASS 2 WIRING

CD DVD

MAIN

REAR

(

SURROUND

)

CENTER

ANT

GND

ANT

(PLAY)

MAIN

DVD

DIGITAL

INPUT

SUB

WOOFER

CENTER

SUB

WOOFER

MONITOR

OUT

SURROUND

OPTICAL

COAXIAL

OUT

(REC)

/CD-R

D-TV

/CBL

V-AUX

VCR

OUT

6CH INPUT OUTPUT

75Ω UNBAL.

MAIN A OR B : 6Ω MIN./SPEAKER

CENTER : 6Ω MIN./SPEAKER

REAR

: 6Ω MIN./SPEAKER

0104V340R_09-18_EN(U).p65 03.3.28, 11:54 AM16

English

PREPARATION

Connecting the power supply

cords

■ Connecting the AC power cord

Plug in this unit to a wall outlet.

■ VOLTAGE SELECTOR

(General model only)

The VOLTAGE SELECTOR on the rear panel of this unit

must be set for your local main voltage BEFORE

plugging into the AC main supply. Voltages are 110V-

120V/220V-240V AC, 50/60 Hz.

VOLTAGE SELECTOR

Turning on the power

When all connections are complete, turn on the power of

this unit.

1 Press STANDBY/ON (SYSTEM POWER on

the remote control) to turn on the power of

this unit.

The level of the main volume, and then the current

DSP program name appear on the front panel

display.

Remote control

Front panel

(General model)

CONNECTIONS

REAR

RROUND

)

110V-120V

220V-240V

./SPEAKER

VOLTAGE

SELECTOR

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

SYSTEM

POWER

STANDBY

POWER

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

AMP

CODE SET

REC

6CH INPUT

AUDIO

DISC SKIP

+ ++

STANDBY

/ON

POWER

SYSTEM

0104V340R_09-18_EN(U).p65 03.3.28, 11:54 AM17

Using the basic menu

Use the remote control to make adjustments.

• Press SPEAKERS A/B on the front panel to select the

main speakers you want to use, and set SPEAKERS

ON/OFF to the ON position.

• Make sure you disconnect headphones from this unit.

1 Press AMP.

2 Press SET MENU.

“BASIC MENU” appears on the front panel display,

as shown here.

If the front panel display

changes to show anything

other than “BASIC MENU”,

press u until it displays

“BASIC MENU”.

3 Press j / i to enter into the BASIC menu.

The front panel display changes as shown here:

BASIC SYSTEM SETTINGS

The “BASIC” menu allows you to set some of the basic “SOUND” menu parameters with a minimum of effort. If you

wish to configure the unit more precisely to suit your listening environment, use the more detailed parameters from the

“SOUND” menu instead of those under the “BASIC” menu (See page 38). Altering any parameters in the BASIC menu

will reset all parameters in the “SOUND” menu.

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

AMP

MUTE

INPUTMUTE

VOLUME

–

CHVOL

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

4,7

3,5

SET MENU

A/B/C/D/E

SELECT

–

PRESET/CH

4 Press u / d to change the display to the

setting you want to alter.

SETUP

Changes the speaker and amplifier settings to suit the

size of the room you are using. Refer to “Setting the

unit to match your speaker system” on page 20 for

more information.

SP LEVEL

Adjusts the output levels of the speakers.

Refer to “Setting speaker output levels” on page 20

for more information.

5 Press j / i to enter the desired setting mode.

6 Change the unit settings to suit your

listening environment. When you have

finished, the unit will automatically return to

the basic menu.

7 Press u / d to exit from the set menu.

The front panel display changes in the following

order:

BASIC MENU

SELECT

–

PRESET/CH

1 SETUP

SELECT

–

PRESET/CH

↑

BASIC

↓↑

SOUND

↓↑

INPUT

↓↑

OPTION

↓

Exit

AMP

0105V340R_19-21_EN(U)a.p65 03.3.28, 11:54 AM18

English

PREPARATION

SET MENU

BASIC SOUND INPUT OPTION

1 SETUP

Press j / i to alter the settings for each

parameter. Use d to move to the next

setting.

2 SP LEVEL

Press j / i to adjust the balance

between each speaker and the left main

speaker. Use d to move to the next

setting.

1 ROOM

Choose from S/M/L.

2 SUBWOOFER

Choose either of YES/NONE.

3 SPEAKERS

Choose from 2/3/4/5 spk.

4 SET/CANCEL

Choose either of SET/CANCEL.

5 CHECK OK:

Choose either of YES/NO.

1 L-R

Adjust the balance between the main

left and right speakers.

2 C

Adjust the balance between the main

left and center speakers.

3 RL

Adjust the balance between the main

left and rear left speakers.

4 RR

Adjust the balance between the rear

left and rear right speakers.

SET

BASIC SYSTEM SETTINGS

YES

CANCEL

• After altering the “1 SETUP” parameters, readjust the output levels of the speakers at “2 SP LEVEL”.

• See pages 37 – 42 for a detailed explanation of the “SOUND”, “INPUT” and “OPTION” menus.

5 SWFR

Adjust the balance between the main

left speaker and the subwoofer.

0105V340R_19-21_EN(U)a.p65 03.3.28, 11:54 AM19

Setting the unit to match your

speaker system

Follow the instructions below to set the amplifier output

to match the size of your room and speakers. Press u / d

to cycle through parameters 1 through 4, and j / i to alter

the parameter setting.

Factory default settings are highlighted.

1 ROOM

Settings: S, M, L

Select the size of the room you have installed your

speakers in. Roughly speaking, the room sizes are

defined as follows:

[U.S.A. and Canada models]

S: 16ft. x 3ft., 200sq.ft. (4.8 x 4m, 20m

)

M: 20ft. x 16ft., 300sq.ft. (6.3 x 5.0m, 30m

)

L: 26ft. x 19ft., 450sq.ft. (7.9 x 5.8m, 45m

)

[Other models]

S: 3.6m x 2.8m, 10m

M: 4.8m x 4.0m, 20m

L: 6.3m x 5.0m, 30m

2 SUBWOOFER

Settings: YES, NONE

Select YES if you have a subwoofer in your system,

or NONE if you do not.

3 SPEAKERS

Settings: 2, 3, 4, 5 (spk)

Select the number of speakers you wish to use in your

speaker configuration. This number does not include

your subwoofer.

BASIC SYSTEM SETTINGS

4 SET or CANCEL

Select SET to confirm the changes you made to the

above three settings. The unit will output a test tone to

the speakers (see

). Alternatively, select CANCEL

to exit this menu without altering any of the unit

settings.

5 Use the test tone to check the speaker levels.

When you select SET in

, the display changes to

“CHECK: TestTone”, and the unit outputs a test tone

to each of the speakers in turn. When the test tone

begins, the display changes to “CHECK OK?--YES”.

If the volume of the test tone varies between speakers,

press j / i to change the display to “NO”. The unit

will automatically enter the “2 SP LEVEL” mode.

If the test tone is output at the same volume from all

of the speakers, select “CHECK OK: YES”. Press d

to exit from the SETUP menu.

Notes

• The unit cycles the test tone around each of the speakers in

turn twice.

• The indicator of the speaker currently outputting the test tone

flashes on the front panel display.

Setting speaker output levels

(SP LEVEL)

Use this menu to compare and adjust the test tone output

from each speaker to the output from the left main (or left

rear) speaker so that the volume level for all speakers is

identical. Press u / d to select a speaker, then adjust the

balance using j / i.

Note

• The unit outputs the test tone from the selected speaker and

the left main (or left rear) speaker in turn. The indicator of the

speaker currently outputting the test tone flashes on the front

panel display.

1 L-R

Adjusts the balance between the main left and right

speakers.

2 C

Adjusts the balance between the main left and center

speakers.

3 RL

Adjusts the balance between the main left and rear

left speakers.

4 RR

Adjusts the balance between the rear left and rear

right speakers.

5 SWFR

Adjust the balance between the main left speaker and

the subwoofer.

Setting

2spk

3spk

4spk

5spk

Display

L R

L C R

L R

RL RR

L C R

RL RR

Speaker

Main L/Main R

Main L/Center/Main R

Main L/Main R/Rear L/

Rear R

Main L/Center/Main R/

Rear L/Rear R

0105V340R_19-21_EN(U)a.p65 03.3.28, 11:54 AM20

English

BASIC

OPERATION

PLAYBACK

1 Press STANDBY/ON (SYSTEM POWER on

the remote control) to turn on the power.

2 Turn on the video monitor connected to this

unit.

3 Press and set SPEAKERS

ON/OFF inward (ON).

4 Press and set SPEAKERS

A/B inward (A) or outward

(B) to select the main

speakers you want to use.

5 Press INPUT l / h repeatedly (one of the

input selector buttons on the remote control)

to select the input source.

The selected input source name and input mode

appear on the front panel display for a few seconds.

To select the audio source connected to the 6CH

INPUT jacks

• Select the input to which the video source component is

connected before selecting an audio source.

Press 6CH INPUT until “6CH INPUT” appears on the

front panel display.

Note

• If “6CH INPUT” is shown on the front panel display, no other

source can be played. To select another input source, first

press 6CH INPUT so that “6CH INPUT” disappears from the

front panel display.

STANDBY

/ON

POWER

SYSTEM

Remote control

Front panel

Selected input source

6CH INPUT

Remote control

Front panel

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

34 5

SYSTEM

POWER

STANDBY

POWER

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

AMP

CODE SET

MUTE

INPUTMUTE

REC

6CH INPUT

AUDIO

DISC SKIP

VOLUME

–

CHVOL

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

VOLUME

L R

DVD AUTO

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

SPEAKERS

AON

BOFF

SPEAKERS

AON

BOFF

INPUT

0106V340R_22-27_EN(U).p65 03.3.28, 11:54 AM21

■ BGV (background video) function

The BGV function allows you to view images from a

video source together with sounds from an audio source.

For example, you can enjoy listening to classical music

while watching beautiful scenery from a video source on

the video monitor.

Select a source from the video group, then select a source

from the audio group using the input selector buttons on

the remote control.

■ To mute the sound

Press MUTE on the

remote control.

To resume audio output, press

MUTE again.

• You can change the amount by which the unit reduces the

volume in “OPTION 3 AUDIO MUTE” in the set menu.

• You can also cancel mute by pressing VOLUME +/–, etc.

• During muting, the MUTE indicator flashes on the front panel

display.

■ Night listening mode

This mode reproduces dialogue clearly while reducing the

volume of loud sound effects for easier listening at low

volumes or at night.

Press NIGHT on the

remote control.

Press NIGHT once more to

return to normal reproduction.

Note

• Setting the unit in standby mode cancels night listening mode.

• You can use night listening mode with any of the sound field

programs.

• The NIGHT indicator on the front panel display lights when

the unit is in night listening mode.

• Night listening mode may vary in effectiveness depending on

the input source and surround sound settings you use.

■ When you have finished using this unit

Press STANDBY/ON (STANDBY on the

remote control) to set this unit in standby

mode.

6 Start playback or select a broadcast station

on the source component.

Refer to the operation instructions for the

component.

7 Adjust the volume to the desired level.

The volume level is displayed digitally.

Example: –70 dB

Control range: VOLUME MUTE (minimum) to

0 dB (maximum)

The volume level indicator also shows the current

volume level as a bar graph.

If desired, use CONTROL and BASS/TREBLE –/+.

These controls only effect the sound from the main

speakers.

Notes

• If you increase or decrease the high-frequency or the low-

frequency sound to an extreme level, the tonal quality from the

center and rear speakers may not match that of the main left

and right speakers.

• If you have connected a recording component to the VCR

OUT, or MD/CD-R OUT jacks, and you notice distortion or

low volume during playback from other components, try

turning the recording component on.

8 Select a DSP program if desired.

Use PROGRAM l / h (DSP program buttons on

the remote control) to select a DSP program. See

pages 27 – 30 for details about DSP programs.

When using the remote control, press AMP before

selecting a DSP program.

VOLUME

Front panel

Remote control

Front panel Remote control

STANDBY

/ON

STANDBY

Front panel

Remote control

MUTE

VOLUME

–

PROGRAM

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

PLAYBACK

BASS/TREBLE

CONTROL

NIGHT

Front panel

0106V340R_22-27_EN(U).p65 03.3.28, 11:54 AM22

English

BASIC

OPERATION

Input modes and indications

This unit is equipped with 2 types of input jacks for the

CD and DVD sources only. You can select the type of

input signals you wish to use.

Each time you turn on the unit power, the input mode is

set to the “INPUT 2 INPUT MODE” setting defined in

the set menu.

Press INPUT MODE repeatedly until the

desired input mode is shown on the front

panel display.

AUTO: In this mode, the input signal is selected

automatically as follows:

1) Digital signal

2) Analog signal

DTS: In this mode, only digital input signals

encoded with DTS are selected, even if the

unit is receiving another signal

simultaneously.

ANALOG: In this mode, only analog input signals are

selected, even the unit is receiving digital

signals at the same time.

Notes

• When AUTO is selected, this unit automatically determines

the type of signal. If it detects a Dolby Digital or DTS signal,

the decoder automatically switches to the appropriate setting.

• When playing a disc encoded with Dolby Digital or DTS on

some LD or DVD players, there is a delay in sound output for

a moment when playback resumes after a search, because the

unit must select the digital signal again.

• When playing a LD source that has not been digitally

recorded, the unit may not output any sound for some LD

players. In this case, set the input mode to ANALOG.

Front panel

Input mode

■ Notes on digital signals

The digital input jacks of this unit can handle 96 kHz

sampling digital signals. Note the following when a

digital signal with a sampling frequency greater than 48

kHz is input to this unit:

• You cannot use any DSP programs.

• The unit will output sound as 2-channel stereo from the

main left and right speakers only. Therefore, you

cannot adjust the level of the effect speakers while

listening to such a source.

■ Notes on playing DTS-CD/LDs

• If the digital output data of the player has been

processed in any way, the unit may not be able to

perform DTS decoding even if there is a digital

connection between this unit and the player.

• If you play a source encoded with a DTS signal and set

the input mode to ANALOG, the unit may reproduce

the noise of an unprocessed DTS signal. In this case,

connect the source to a digital input jack on this unit

and set the input mode to AUTO or DTS.

• If you switch the input mode to ANALOG while

playing a source encoded with a DTS signal, the unit

does not output any sound.

• If you play a source encoded with a DTS signal with

the input mode set to AUTO;

– The unit automatically switches to the DTS-

decoding mode (The “t” indicator lights up)

after detecting the DTS signal. When playback of

the DTS source is completed, the “t” indicator

may flash. While this indicator is flashing, the unit

can only reproduce DTS source. If you want to play

a normal PCM source immediately, change the input

mode back to AUTO.

– When the input mode is set to AUTO and a search

or skip operation is performed during playback of a

DTS source, the “t” indicator may flash. If this

state continues for longer than 30 seconds, the unit

will automatically switch from “DTS-decoding”

mode to PCM digital signal input mode. The “t”

indicator will turn off.

PLAYBACK

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

VOLUME

L R

DVD AUTO

INPUT MODE

0106V340R_22-27_EN(U).p65 03.3.28, 11:54 AM23

Selecting a sound field program

You can enhance your listening experience by selecting a

DSP program. For details about each program, see pages

27 – 30.

1 Press AMP.

2 Press one of the numeric buttons on the

remote control to select the desired

program.

The name of the selected program appears on the

front panel display.

AMP

3 After selecting the desired program, press

the same button repeatedly to cycle through

sub-programs if available.

Example: Pressing MOVIE 2 repeatedly

switches the sub-program between

“Adventure” and “General”.

Notes

• There are 9 programs with sub-programs available with this

unit. However, the selection depends on the input signal

format and not all sub-programs can be used with all input

signal formats.

• You cannot use the digital sound field processor with a source

connected to the 6CH INPUT jacks of this unit or when the

unit is reproducing a digital source with a sampling frequency

greater than 48 kHz.

• The acoustics of your listening room affect the DSP program.

Minimize the sound reflections in your room to maximize the

effect created by the program.

• When you select an input source, this unit automatically

selects the last DSP program used with that source.

• When you set this unit in standby mode, it stores the current

source and DSP program in memory and automatically selects

them when you turn on the power again.

• If the unit receives a Dolby Digital or DTS signal when the

input mode is set to AUTO, the DSP program (No. 7–9)

automatically switches to the appropriate decoding program.

• When the unit is reproducing a monaural source with PRO

LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie,

no sound is output from the main and rear speakers. Sound can

only be heard from the center speaker. (If “1A CENTER” on

the set menu is set to NON, the center channel sound is output

from the main speakers.)

• You can also select DSP program by pressing PROGRAM

l / h on the front panel.

• Select a program based on your listening preference. Program

names are just for reference.

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

PROGRAM l / h

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

AMP

MUTE

INPUTMUTE

VOLUME

–

CHVOL

SET MENU

EVE

2,3

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

PLAYBACK

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

VOLUME

L C R

RLLFE RR

Adventure

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

VOLUME

L C R

RLLFE RR

General

0106V340R_22-27_EN(U).p65 03.3.28, 11:54 AM24

English

BASIC

OPERATION

The display cycles as follows each time you press q/

DTS:

PRO LOGIC→PRO LOGIC Enhanced→PRO LOGIC II

Movie→PRO LOGIC II Music→PRO LOGIC→....

• You can select PRO LOGIC, PRO LOGIC Enhanced, PRO

LOGIC II Movie, and PRO LOGIC II Music by pressing

PROGRAM l / h on the front panel repeatedly.

■ Playing Dolby Digital EX or DTS ES

material

Press 6.1/5.1 to turn on the Dolby Digital + Matrix 6.1 or

DTS + Matrix 6.1 decoder.

The display changes AUTO → Matrix6.1 → OFF each

time 6.1/5.1 is pressed.

AUTO: This mode automatically switches Dolby

Digital + Matrix 6.1 and DTS + Matrix 6.1

depending on the signal. Virtual rear center

speaker does not work for 5.1 channel

sources.

Matrix 6.1: This setting produces 6-channel playback of

the input source using the Matrix 6.1

decoder. The virtual rear center speaker can

be used when playing a 5.1-channel source.

OFF: Virtual rear center speaker does not work in

this setting.

Notes

• Some 6.1-channel compatible discs do not have a signal (flag)

that this unit can automatically detect. Select “Matrix 6.1” to

play these kinds of discs with 6.1-channel sound.

• 6.1-channel playback is not possible even if you press 6.1/5.1

in the following cases:

1 When effects are turned off.

2 When the source connected to the 6CH INPUT jacks is

being played.

3 When the unit is reproducing a Dolby Digital KARAOKE

source.

4 When headphones are connected to the PHONES jack.

• The input mode resets to AUTO when you turn the unit power

off.

■ Selecting PRO LOGIC or PRO LOGIC II

You can listen to 2-channel sources decoded into five

discrete channels by selecting PRO LOGIC or PRO

LOGIC II in program No. 9.

1 Select a 2-channel source and start playback

on the source component.

2 Press AMP.

3 Press q/DTS.

AMP

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

PROGRAM l / h

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

AMP

MUTE

INPUTMUTE

VOLUME

–

CHVOL

SET MENU

LEVEL

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

6.1/5.1

+10

(Example)

PLAYBACK

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

MATRIX

VOLUME

L C R

RLLFE RR

Matrix 6.1

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

VOLUME

L R

PRO LOGIC

0106V340R_22-27_EN(U).p65 03.3.28, 11:54 AM25

Notes

• If you turn off the sound effects, no sound is output from the

center speaker or rear speakers.

• If you turn off the sound effects while the unit is reproducing

sound from a Dolby Digital or DTS signal, the dynamic range

of the signal is automatically compressed and the unit will mix

the sounds of the center and rear speaker channels and output

them from the main speakers.

• The volume may be greatly reduced when you turn off the

sound effects or if you set “SOUND 4 D. RANGE (dynamic

range)” on the set menu to MIN. In this case turn on the sound

effect.

• During stereo reproduction, you can display information such

as the type, format and sampling frequency of the signal input

from the components connected to this unit.

(While playing a source)

1 Press AMP.

2 Press d to display the information about the

input signal.

(Format): The display shows the signal format. When the

unit cannot detect a digital signal it

automatically switches to analog input.

in: The display shows the number of input signal

source channels, as follows: For multi-channel

soundtrack such as front 3 channels, rear 2

channels and LFE, the display shows “3/2/

LFE”.

fs: The display shows the sampling frequency.

When the unit is unable to detect the sampling

frequency “Unknown” shows in the front panel

display.

rate: The display shows the bit rate. When the unit is

unable to detect the bit rate “Unknown” shows

in the front panel display.

flg: The display shows the flag - data encoded in a

DTS or Dolby Digital signal that causes this

unit to automatically switch to the appropriate

decoder for playback.

■ Virtual CINEMA DSP

With Virtual CINEMA DSP, you can enjoy all DSP

programs without rear speakers. It creates virtual speakers

to reproduce a natural sound field.

You can listen to virtual CINEMA DSP by setting “1C

REAR LR” in the set menu to NON. Sound field

processing changes to VIRTUAL CINEMA DSP

automatically.

Note

• This unit is not set in the virtual CINEMA DSP mode even if

“1C REAR LR” is set to NON in the following cases:

– when the 5ch Stereo, DOLBY DIGITAL, Pro Logic, Pro

Logic II, or DTS program is selected;

– when the sound effect is turned off;

– when 6CH INPUT is selected as the input source;

– when a digital signal with a sampling frequency greater

than 48 kHz is input to this unit;

– when using the test tone; or

– when connecting the headphones.

■ SILENT CINEMA DSP

You can enjoy a powerful sound field similar to what you

could expect from actual speakers through headphones,

with SILENT CINEMA DSP. You can listen to SILENT

CINEMA DSP by connecting your headphones to the

PHONES jack while the digital sound field processor is

on. The “SILENT” indicator lights up on the front panel

display. (When sound effects are off, the unit reproduces

the source in normal stereo.)

To listen to sounds with headphones only, press

SPEAKERS ON/OFF to turn off the output of all the

speakers.

Notes

• This feature is not available when 6CH INPUT is selected or

the unit is receiving a digital signal with a sampling frequency

greater than 48 kHz.

• The sound from the LFE channel will be mixed and output

from the headphones.

■ Normal stereo reproduction

Press STEREO to turn off the sound effect

for normal stereo reproduction.

Press STEREO again to turn the sound effect back

on.

STEREO

ENTER

Front panel

Remote control

SELECT

PRESET/CH

–

EFFECT

STEREO

PLAYBACK

0106V340R_22-27_EN(U).p65 03.3.28, 11:54 AM26

English

BASIC

OPERATION

DIGITAL SOUND FIELD PROCESSING (DSP)

Understanding sound fields

A sound field is defined as the “characteristic sound reflections of a

particular space.” In concert halls and other music venues, we hear

early reflections and reverberations as well as the direct sound

produced by the artist(s). The variations in the early reflections and

other reverberations among the different music venues is what gives

each venue its special and recognizable sound quality.

YAMAHA sent teams of sound engineers all around the world to

measure the sound reflections of famous concert halls and music

venues, and collect detailed sound field information such as the

direction, strength, range, and delay time of those reflections. Then

we stored this enormous amount of data in the ROM chips of this

unit.

■ Recreating a sound field

Recreating the sound field of a concert hall or an opera house requires localizing the virtual sound sources in your

listening room. The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound

field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data.

The processor controls the strength and delay time of the signals output from the four effect speakers to localize the

virtual sound sources and fully encompass the listener.

Hi-Fi DSP programs

The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in

mind that most of these are precise digital recreations of actual acoustic environments.

No.

Program

CONCERT HALL

(except China

model)

HALL IN CHINA

(China model only)

JAZZ CLUB

ROCK CONCERT

ENTERTAINMENT/

Disco

ENTERTAINMENT/

5ch Stereo

Features

A large round concert hall with a rich surround effect. Pronounced reflections from all directions

emphasize the extension of sounds. The sound field has a great deal of presence, and your virtual

seat is near the center, close to the stage.

An large, extremely famous concert hall in China with approx. 650 seats on the first floor and

approx. 500 seats on the second floor. The clear sound field of this gorgeous and majestic hall is

suited especially for classic music. Your virtual seat is near the center on the first floor.

This is the sound field at stage front in “The Bottom Line”, a famous New York jazz club, that

seats up to 300 people. Its wide left to right seating arrangement offers a real and vibrant sound.

The ideal program for lively, dynamic rock music. The data for this program was recorded at LA’s

“hottest” rock club. The listener’s virtual seat is at the center-left of the hall.

This program recreates the acoustic environment of a lively disco in the heart of a big city. The

sound is dense and highly concentrated. It is also characterized by a high-energy, “immediate”

sound.

Using this program increases the listening position range. This is a sound field suitable for

background music at parties, etc.

0107V340R_28-31_EN(U).p65 03.3.28, 11:54 AM27

CINEMA-DSP

Sound design of CINEMA-DSP

Filmmakers intend for the dialog to be located right on the screen, the effect sound a little farther back, the music spread

even farther back, and the surround sound around the listener. Of course, all of these sounds must be synchronized with

the images on the screen.

CINEMA-DSP is an upgraded version of YAMAHA DSP specially designed for movie soundtracks. CINEMA-DSP

integrates the DTS, Dolby Digital, and Dolby Pro Logic surround sound technologies with YAMAHA DSP sound field

programs to provide a surround sound field. It recreates comprehensive movie sound design in your audio room. In

CINEMA-DSP sound field programs, YAMAHA’s exclusive DSP processing is added to the Main left and right, and

Center channels, so the listener can enjoy realistic dialogue, depth of sound, smooth transition between sound sources,

and a surround sound field that goes beyond the screen.

When a DTS or Dolby Digital signal is detected, the CINEMA-DSP sound field processor automatically chooses the

most suitable sound field program for that signal.

L SURROUND SOUND FIELD

R SURROUND SOUND FIELD

PRESENCE SOUND FIELD

DIALOG

EFFECT

MUSIC

In addition to the DSP, this unit is equipped with a variety of precise decoders; Dolby Pro Logic decoder for Dolby

Surround sources, Dolby Pro Logic II decoder for Dolby Surround and 2-channel sources, Dolby Digital/DTS decoder

for multi-channel sources and Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder for adding a rear center channel

(the rear center channel is outputted from virtual rear center speaker). You can select CINEMA-DSP programs to

optimize these decoders and the DSP sound patterns depending on the input source.

CINEMA-DSP Programs

The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in

mind that most of these are precise digital recreations of actual acoustic environments. Select the DSP program that you

feel sounds best regardless of the name and description given for it below.

■ For audio-video sources: No. 4 to 6

No.

Program

ENTERTAINMENT/

Game

MUSIC VIDEO

TV THEATER/

Mono Movie

TV THEATER/Variety/

Sports

Features

This program adds a deep and spatial feeling to video game sounds.

This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an

actual jazz or rock concert.

This program is provided for reproducing monaural video sources (such as old movies). The

program produces the optimum reverberation to create sound depth using only the presence sound

field.

Though the presence sound field is relatively narrow, the surround sound field employs the sound

environment of a large concert hall. This effect enhances the experience of watching various TV

programs such as news, variety shows, music programs or sports programs.

0107V340R_28-31_EN(U).p65 03.3.28, 11:54 AM28

English

BASIC

OPERATION

■ For movie programs

No.

Features

This program creates the extremely wide sound field of a 70-mm movie theater. It

precisely reproduces the source sound in detail, making both the video and the sound field

incredibly real. This is ideal for any kind of video source encoded with Dolby Surround,

Dolby Digital or DTS (especially large-scale movie productions).

This program clearly reproduces dialog and sound effects in the latest sound form of

science fiction films, thus creating a broad and expansive cinematic space amid the

silence. You can enjoy science fiction films in a virtual-space sound field that includes

Dolby Surround, Dolby Digital and DTS-encoded software employing the most advanced

techniques.

This program is ideal for precisely reproducing the sound design of the newest 70-mm and

multichannel soundtrack films. The sound field is made to be similar to that of the newest

movie theaters, so the reverberations of the sound field itself are restrained as much as

possible.

This program is for reproducing sounds from 70-mm and multichannel soundtrack films,

and is characterized by a soft and extensive sound field. The presence sound field is

relatively narrow. It spatially spreads all around and toward the screen, restraining the

echo effect of conversations without losing clarity.

The built-in decoder reproduces source sounds and sound-effects precisely.

No DSP effect is applied in this program.

This program ideally simulates the multi-surround speaker systems of the 35-mm film

theaters. Dolby Pro Logic decoding, Dolby Digital decoding or DTS decoding and digital

sound field processing create precise effects without altering the original sound orienta-

tion.

The surround effects produced by this sound field wrap around the viewer naturally from

the back to the left and right, and toward the screen.

MOVIE

THEATER 1

MOVIE

THEATER 2

Spectacle

Sci-Fi

Adventure

General

Program

Straight Decode

Enhanced Mode

CINEMA-DSP

Straight Decode

This unit is equipped with various precise decoders;

• Dolby Digital/DTS decoder for multi-channel reproduction of the original sound

• Dolby Pro Logic/Pro Logic II decoder for multi-channel reproduction of 2-channel sources

Select any of the Straight Decode modes in Program 9 (except for the sub-program “Enhanced”) to use any of these

decoders for reproducing the original sound without any sound effects added. In this case, no DSP effect is applied and

the DSP indicator turns off.

Note

• When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, and the main

and rear speakers output effect sounds.

0107V340R_28-31_EN(U).p65 03.3.28, 11:54 AM29

Sound field effects

The 6-channel soundtracks found on 70-mm film produce precise sound field localization and rich, deep sound without

using matrix processing. This unit’s MOVIE THEATER programs provide the same quality of sound and sound

localization that 6-channel soundtracks do. The built-in Dolby Digital or DTS decoder brings the professional-quality

sound designed for movie theaters into your home. With this unit’s MOVIE THEATER programs, you can use Dolby

Digital or DTS technology to recreate a dynamic sound that gives you the feeling of being in a public theater.

■ Dolby Digital/DTS + DSP sound field effect

These programs use YAMAHA’s tri-field DSP processing

on each of the Dolby Digital or DTS signals for the front,

left surround, and right surround channels. This

processing enables this unit to reproduce the immense

sound field and surround expression of a Dolby Digital-

or DTS-equipped movie theater without sacrificing the

clear separation of all channels.

■ Dolby Digital/DTS + Matrix 6.1 + DSP sound field effect

These programs provide you with the maximum experience of the spacious surround effects by adding an extra rear

center DSP sound field created from the virtual rear center speaker.

■ Dolby Pro Logic + DSP sound field effect

Most movie material has 4-channel (left, center, right, and

surround) sound information encoded by Dolby Surround

matrix processing and stored on the left and right tracks.

These signals are processed by the Dolby Pro Logic

decoder. The MOVIE THEATER programs are designed

to recreate the spaciousness and delicate nuances of

sound that tend to be lost in the encoding and decoding

processes.

■ Dolby Pro Logic II

Dolby Pro Logic II decodes Dolby Surround software into 5 discrete full-range channels (3 channels in front and 2

channels in rear). There are 2 modes; MOVIE for movies and MUSIC for 2-channel audio sources.

Surround DSP

sound field

Right surround DSP

sound field

Presence DSP

sound field

Left surround DSP

sound field

Presence DSP

sound field

CINEMA-DSP

0107V340R_28-31_EN(U).p65 03.3.28, 11:54 AM30

English

BASIC

OPERATION

TUNING

4 Press PRESET/TUNING l / h once to begin

automatic tuning.

Press h to tune in to a higher frequency, or press l

to tune in to a lower frequency.

When the unit is tuned in to a station, the “TUNED”

indicator lights up and the frequency of the station

received is shown on the front panel display.

■ Manual tuning

If the signal from the station you are trying to select is

weak, you must tune in to it manually.

1 Select TUNER and the reception band

following steps 1 and 2 described in

“Automatic tuning” at left.

2 Press TUNING MODE (AUTO/MAN’L MONO)

until the “AUTO” indicator disappears from

the front panel display.

If the colon (:) appears on the front panel display,

press PRESET/TUNING (EDIT) to turn it off.

3 Press PRESET/TUNING

l / h to tune in to the

desired station manually.

Hold down the button to

continue searching.

Note

• Manually tuning in to an FM station will automatically change

the reception mode to monaural to increase the signal quality.

There are 2 methods of tuning; automatic and manual.

Automatic tuning is effective when station signals are

strong and there is no interference.

■ Automatic tuning

1 Press INPUT l / h (TUNER on the remote

control) to select TUNER as the input source.

2 Press FM/AM to select the reception band.

“FM” or “AM” appears on the front panel display.

3 Press TUNING MODE (AUTO/MAN’L MONO)

so that the “AUTO” indicator lights up on the

front panel display.

If the colon (:) appears on the front panel display,

press PRESET/TUNING (EDIT) to turn it off.

Lights up

Front panel Remote control

Disappears

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

233

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

FM/AM

AUTO/MANUAL MONO

TUNING MODE

AUTO

EDIT

PRESET/TUNING

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

AUTO

TUNED

A AM 1440 kHz

PRESET/TUNING

SET MENU

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

AUTO

TUNED

A AM 1530 kHz

AUTO/MANUAL MONO

TUNING MODE

AUTO

EDIT

PRESET/TUNING

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

TUNED

A AM 1440 kHz

PRESET/TUNING

SET MENU

INPUT

0108V340R_32-39_EN(U).P65 03.3.28, 11:54 AM31

Presetting stations

■ Automatically presetting stations (for FM

stations)

You can use the automatic preset tuning feature to store

FM stations. This function enables the unit to

automatically tune in to FM stations with strong signals,

and to store up to 40 (8 stations x 5 groups) of those

stations in order. You can then recall any preset station

easily by selecting the preset number.

1 Press FM/AM to select the FM band.

2 Press TUNING MODE (AUTO/MAN’L MONO)

until the “AUTO” indicator lights up on the

front panel display.

3 Press and hold MEMORY (MAN’L/AUTO FM)

for at least 3 seconds.

The preset number and the “MEMORY” and

“AUTO” indicators flash. After about 5 seconds,

automatic preset tuning starts, beginning at the

frequency currently displayed and moving toward the

higher frequencies.

When automatic preset tuning is completed, the front

panel display shows the frequency of the last preset

station.

AUTO

Lights up

Notes

• Any stored station data existing under a preset number is

cleared when you store a new station under that preset number.

• If the number of the received stations does not reach E8,

automatic preset tuning has automatically stopped after

searching all stations.

• Only FM stations with sufficient signal strength are stored

automatically by automatic preset tuning. If the station you

want to store is weak in signal strength, tune in to it manually

in the monaural mode, and store it by following the procedure

described in “Manually presetting stations” on page 33.

Automatic preset tuning options

You can select the preset number from which this unit

will store FM stations and/or begin tuning toward lower

frequencies. After pressing MEMORY in step 3:

1. Press A/B/C/D/E and PRESET/TUNING l / h to

select the preset number under which the first station

will be stored. Automatic preset tuning will stop when

stations have all been stored up to E8.

2. Press PRESET/TUNING (EDIT) to turn off the colon

(:) and then press PRESET/TUNING l to begin

tuning toward lower frequencies.

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is set in standby mode,

the power cord is disconnected from the AC outlet, or

the power supply is temporarily cut due to power

failure. However, if the power is cut for more than one

week, the preset stations may be cleared. If so, store

the stations again.

TUNING

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

1 32

FM/AM

AUTO/MANUAL MONO

TUNING MODE

MAN`L/AUTO FM

MEMORY

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

AUTO

MEMORY

A1:FM 89.9 MHz

0108V340R_32-39_EN(U).P65 03.3.28, 11:54 AM32

English

BASIC

OPERATION

4 Press PRESET/TUNING l / h to select a

preset station number (1 to 8) while the

“MEMORY” indicator is flashing.

Press h to select a higher preset station number.

Press l to select a lower preset station number.

5 Press MEMORY (MAN’L/AUTO FM) on the

front panel while the “MEMORY” indicator is

flashing.

The station band and frequency appear on the front

panel display with the preset group and number you

have selected.

Shows the displayed station has been stored as C3.

6 Repeat steps 1 to 5 to store other stations.

Notes

• Any stored station data existing under a preset number is

cleared when you store a new station under that preset number.

• The reception mode (stereo or monaural) is stored along with

the station frequency.

■ Manually presetting stations

You can store up to 40 stations (8 stations x 5 groups)

manually.

1 Tune in to a station.

See page 31 for tuning instructions.

When tuned to a station, the front panel display

shows the frequency of the station received.

2 Press MEMORY (MAN’L/AUTO FM).

The “MEMORY” indicator flashes for about

5 seconds.

3 Press A/B/C/D/E repeatedly to select a preset

station group (A to E) while the “MEMORY”

indicator is flashing.

The group letter appears. Check that the colon (:) is

showing on the front panel display.

Flashes

TUNING

Preset group

Preset number

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

2,5

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

TUNED

A AM 1440 kHz

MAN`L/AUTO FM

MEMORY

A/B/C/D/E

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

MEMORYTUNED

C :AM 1440 kHz

PRESET/TUNING

SET MENU

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

MEMORYTUNED

C3:AM 1440 kHz

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

TUNED

C3:AM 1440 kHz

MAN`L/AUTO FM

MEMORY

0108V340R_32-39_EN(U).P65 03.3.28, 11:54 AM33

■ Exchanging preset stations

You can exchange the assignment of two preset stations.

The example below describes the procedure for

exchanging preset station “E1” with “A5”.

1 Select preset station “E1” by using the

A/B/C/D/E and PRESET/TUNING l / h.

See “Selecting a preset station” at left.

2 Press and hold PRESET/TUNING (EDIT) for

at least 3 seconds.

“E1” and the “MEMORY” indicator flash on the

front panel display.

3 Select preset station “A5” by using the

A/B/C/D/E and PRESET/TUNING l / h.

“A5” and the “MEMORY” indicator flash on the

front panel display.

4 Press PRESET/TUNING (EDIT) again.

The stations stored at the two preset assignments are

exchanged.

Selecting a preset station

You can recall any desired station simply by selecting the

preset station number under which it was stored.

1 Press A/B/C/D/E (A/B/C/D/E on the remote

control) to select the preset station group.

The preset group letter appears on the front panel

display and changes each time you press A/B/C/D/E.

2 Press PRESET/TUNING l / h (PRESET u /

d on the remote control) to select a preset

station number (1 to 8).

The preset group and number appear on the front

panel display along with the station band and

frequency, and the “TUNED” indicator lights up.

Shows the exchange of stations has been

completed.

Front panel

Remote control

Front panel

Remote control

TUNING

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

TUNED

C3:AM 1440 kHz

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

MUTE

INPUTMUTE

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

A/B/C/D/E

SET MENU

A/B/C/D/E

PRESET/TUNING

SET MENU

SELECT

–

PRESET/CH

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

2,4

1,31,3

EDIT

PRESET/TUNING

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

MEMORYTUNED

E1:FM 87.5 MHz

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

MEMORYTUNED

A5:FM 90.6 MHz

EDIT

PRESET/TUNING

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER

MEMORY

EDIT E1-A5

0108V340R_32-39_EN(U).P65 03.3.28, 11:54 AM34

English

BASIC

OPERATION

Use this feature to automatically set this unit in standby

mode after the amount of time you have set. The sleep

timer is useful when you are going to sleep while this unit

is playing or recording a source.

The sleep timer can only be set with the remote control.

• By connecting a commercially available timer to this unit, you

can also set a wake-up timer. Refer to the operation

instructions of the timer.

■ Setting the sleep timer

1 Select a source and start playback on the

source component.

2 Press SLEEP repeatedly

to set the amount of time.

Each time you press SLEEP,

the front panel display changes

as shown below.

3 The “SLEEP” indicator lights up on the front

panel display soon after the sleep timer has

been set.

The display then returns to the previous indication.

SLEEP TIMER

■ Canceling the sleep timer

Press SLEEP repeatedly until “SLEEP OFF”

appears on the front panel display.

After a few seconds, “SLEEP OFF” disappears, the

“SLEEP” indicator goes off and the display returns

to the previous indication.

• The sleep timer setting can also be canceled by setting this

unit in standby mode by using STANDBY on the remote

control (or STANDBY/ON on the front panel) or by

disconnecting the AC power cord from the AC outlet.

SYSTEM

POWER

STANDBY

POWER

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

AMP

CODE SET

REC

6CH INPUT

AUDIO

DISC SKIP

+ ++

SLEEP

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

DSP

HiFi

SLEEP

VOLUME

L R

ROCK CONCERT

V-AUXVCR

D-TV/CBL

DVD

MD/CD-R

TUNER CD

DSP

HiFi

SLEEP

VOLUME

L R

SLEEP 120min

0108V340R_32-39_EN(U).P65 03.3.28, 11:54 AM35

Recording adjustments and other operations are

performed on other recording components. Refer to the

operation instructions for these components for details on

their operation .

1 Turn on the power of this unit and all

connected components.

2 Select the source component you want to

record from.

3 Start playback (or select a broadcast station)

on the source component.

4 Start recording on the recording component.

Front panel Remote control

RECORDING

Notes

• Do a test recording before you start an actual recording.

• When this unit is set in standby mode, you cannot record

between the components connected to it.

• DSP programs and volume, bass, and treble settings do not

affect the recorded material.

• You cannot record from a source connected to the 6CH

INPUT jacks on this unit.

• Input sources are not output to the same OUT (REC) channel.

(For example, the signal input from VCR IN is not output to

VCR OUT.)

• You cannot record audio signals from a source connected to

the DIGITAL INPUT jack on this unit because the signals

from the DIGITAL INPUT jack and analog input jacks are

independent. Please connect a source to the analog in jacks if

you wish to record from the analog out jacks.

• Check the copyright laws in your country if you wish to

record from records, CDs, radio, etc. Recording of

copyrighted material may infringe copyright laws.

If you playback a video source that uses scrambled or

encoded signals to prevent it from being dubbed, the

picture itself may be disturbed due to those signals.

■ Special considerations when recording

DTS material

The DTS signal is a digital bitstream. Attempting to

digitally record the DTS bitstream will result in noise

being recorded. Therefore, if you want to use this unit to

record sources that have DTS signals recorded on them,

the following considerations and adjustments need to be

made.

For LDs, DVDs and CDs encoded with DTS, follow the

operating instructions of your player to set it to output an

analog signal, if it is compatible with the DTS format.

VOLUME

STANDBY

/ON

AUTO/MAN`L MONO MAN`L/AUTO FM

TUNING MODE MEMORY

EDIT

PRESET/TUNING FM/AM

SILENT

PHONES

SPEAKERS

AON

BOFF

EFFECT

PRESET/TUNING

SET MENU

A/B/C/D/E

PROGRAM

STEREO

BASS/TREBLE

CONTROL

INPUT

6CH INPUTINPUT MODE

SYSTEM

POWER

STANDBY

POWER

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

AMP

CODE SET

REC

6CH INPUT

AUDIO

DISC SKIP

+ ++

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

INPUT

0108V340R_32-39_EN(U).P65 03.3.28, 11:54 AM36

English

ADVANCED

OPERATION

Adjusting the items on the set

Use the remote control to make adjustments.

• You can change set menu parameters while the unit is

reproducing sound.

• You can use NEXT and SET MENU +/– on the front panel to

change these settings, if the unit is not set to TUNER mode.

Press NEXT to select the category or field you wish to change,

and SET MENU +/– to change the parameters.

Note

• You cannot change some set menu parameters while the unit is

in night listening mode.

1 Press AMP.

2 Press SET MENU to enter

the set menu.

3 Press u / d repeatedly to select the desired

menu.

4 Press j / i to enter the selected menu.

5 Press u / d repeatedly to select the item

you want to adjust.

• By pressing SET MENU repeatedly, you can select items in

the same order as when pressing d.

AMP

SET MENU

You can set the following parameters on the set menu to

obtain a better sound from the unit. Change the settings to

reflect the needs of your listening environment.

Set menu list

The set menus are divided by use and function into the 4

categories listed here.

■ BASIC

The BASIC area contains the basic parameters that you

must set before using this unit. It consists of the following

menus. See pages 18 – 20 for a detailed explanation.

1 SETUP

2 SP LEVEL (Speaker level)

■ SOUND

The SOUND area contains parameters for altering sound

output. It consists of the following menus that you can

use to alter the quality and tone of the sound output by the

system.

1 SPEAKER SET

2 SP DISTANCE (Speaker distance)

3 LFE LEVEL (Low frequency effect level)

4 D. RANGE (Dynamic range)

5 CENTER GEQ (Center graphic equalizer)

6 HP TONE CTRL (Headphone tone control)

■ INPUT

The INPUT area contains parameters concerned with

signal input. It consists of the following menus that you

can use to change the assignment of input jacks.

1 I/O ASSIGN

2 INPUT MODE

■ OPTION

This is a supplementary set up menu provided for your

convenience. It consists of the following menus that you

can use to change display brightness, protect existing

settings, and perform other non-essential functions.

1 DISPLAY SET

2 MEM. GUARD

3 AUDIO MUTE

• In the descriptions for each item from the following page, the

default setting is indicated in bold.

SET MENU

A/B/C/D/E

SELECT

–

PRESET/CH

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

AMP

MUTE

INPUTMUTE

VOLUME

–

CHVOL

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

ENTER

3,5,8

4,6,7

0109V340R_40-45_EN(U).p65 03.3.28, 11:54 AM37

6 Press j / i once to enter

the setup mode of the

selected item.

The last setting you adjusted

appears on the front panel

display.

Depending on the menu item,

press u/d to select a sub

item.

7 Press j / i repeatedly to

change the menu item

setting.

8 Press u / d repeatedly until the menu

disappears or just press one of the DSP

program group buttons to exit from the set

menu.

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is in standby mode.

However, if the power cord is disconnected from the

AC outlet, or the power supply is cut for more than

one week, the stored data will be lost. If this happens,

adjust the items again.

The BASIC and SOUND menus

The “BASIC” menu allows you to easily set the

“SOUND 1 SPEAKER SET” and “SOUND 2 SP

DISTANCE” parameters. It is not necessary to reset

any of the parameters in the “BASIC” menu, but you

can access more detailed parameters in the “SOUND”

menu if you wish.

Note

• After altering parameters in the “SOUND” menu, if you

select “BASIC 1 SETUP” and then select “SET”, the

parameters from the “SOUND” menu alter in response to

any changes you make in “BASIC 1 SETUP”. Do not enter

the “BASIC 1 SETUP” menu unless you wish to change

these settings. If you accidentally enter the “BASIC 1

SETUP” menu, select CANCEL to return to the “BASIC”

menu. (page 19)

SELECT

–

PRESET/CH

SELECT

–

PRESET/CH

SELECT

–

PRESET/CH

SOUND 1 SPEAKER SET

(speaker mode settings)

Use this feature to select suitable output modes for your

speaker configuration.

Note

• Some menu item settings have no effect when the unit is

reproducing a source with a digital signal sampling frequency

greater than 48 kHz.

■ 1A CENTER (center speaker mode)

If you add a center speaker to your speaker configuration,

this unit can provide better dialog localization for several

listeners and superior synchronization of sound and

images.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large center speaker. The unit

directs the entire range of the center channel signal to the

center speaker.

SML

Select this if you have a small center speaker. The unit

directs the low-frequency signals (90 Hz and below) of

the center channel to the speakers selected with “1D

BASS”.

NON

Select this if you do not have a center speaker. The unit

directs all of the center channel signal to the main left and

right speakers.

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

SELECT

–

PRESET/CH

SET MENU

0109V340R_40-45_EN(U).p65 03.3.28, 11:54 AM38

English

ADVANCED

OPERATION

■ 1B MAIN (main speaker mode)

Choices: LARGE, SMALL

LARGE

Select this if you have large main speakers. The unit

directs the entire range of the main left and right channel

signals to the main left and right speakers.

SMALL

Select this if you have small main speakers. The unit

directs the low-frequency signals (90 Hz and below) of

the main channel to the speakers selected with “1D

BASS”.

■ 1C REAR LR (rear speaker mode)

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have large rear left and right speakers or

if a rear subwoofer is connected to the rear speakers. The

entire range of the rear channel signal is directed to the

rear left and right speakers.

SML

Select this if you have small rear left and right speakers.

The low-frequency signals (90 Hz and below) of the rear

channel are directed to the speakers selected with “1D

BASS”.

NON

Select this if you do not have rear speakers.

• This unit is set in the virtual CINEMA DSP mode when you

select NON for “1C REAR LR”.

■ 1D BASS (bass out mode)

LFE signals carry low-frequency effects when this unit

decodes a Dolby Digital or DTS signal. Low-frequency

signals are defined as 90 Hz and below. The Low-

frequency signals can be directed to both main left and

right speakers, and to the subwoofer (subwoofer can be

used for both stereo reproduction and the DSP program).

Choices: SWFR (subwoofer), MAIN, BOTH

SWFR

Select this if you use a subwoofer. The unit directs the

LFE signals to the subwoofer.

MAIN

Select this if you do not use a subwoofer. The unit directs

LFE signals to the main speakers.

BOTH

The unit directs LFE signals to the subwoofer. Low-

frequency signals designated to the main channels in

accordance with other speaker mode settings are directed

to both main speakers and the subwoofer.

Note

• When you select MAIN for “1D BASS”, the unit directs the

low-frequency signals (90 Hz and below) of the main channel

to the main speakers even if you select SMALL for the main

speaker mode.

SET MENU

0109V340R_40-45_EN(U).p65 03.3.28, 11:54 AM39

SOUND 2 SP DISTANCE

(speaker distance)

Use this feature to adjust the delay applied to center

channel sounds. This feature works when there is sound

output from the center speakers with a source such as

Dolby Digital or DTS. Ideally, the center speaker should

be the same distance from the main listening position as

the left and right main speakers. However, in most home

situations, the center speaker is placed in line with the

main speakers. By delaying the sound from the center

speaker, you can adjust the apparent distance from the

center speaker to the main listening position to make it

seem the same as the distance between the listening

position and main left and right speakers.

1 Press u / d to select “UNIT”.

2 Press j / i to select the unit “meters” or

“feet” to be used in setting.

3 Press u / d to select the speaker for which

you want to adjust the delay.

4 Press j / i to set the delay.

Press i for higher values and j for lower values.

■ Setting by “meters”

Control range: 0.3 to 24.00 m (for main L/R,

center, rear L/R)

Initial settings: 3.00 m (for main L/R, center,

rear L/R)

■ Setting by “feet”

Control range: 1 to 80 ft (for main L/R, center,

rear L/R)

Initial settings: 10.0 ft (for main L/R, center,

rear L/R)

Note

• No delay will be set if you set the same distance for the main

L/R, center and rear L/R.

SOUND 3 LFE LEVEL

Use this feature to adjust the output level of the LFE

(low-frequency effect) channel when playing back a

Dolby Digital or DTS signal. The LFE signal carries low-

frequency special effect sound which is only added to

certain scenes.

Control range:

SPEAKER ............ –20 to 0 dB

HEADPHONE ..... –20 to 0 dB

Initial setting: 0 dB

1 Press u / d to select the item to be

adjusted.

2 Press j to adjust the LFE level.

Note

• Adjust the LFE level according to the capacity of your

subwoofer or headphones.

SOUND 4 D. RANGE

(dynamic range)

Use this feature to adjust the dynamic range. This setting

is effective only when the unit is decoding Dolby Digital

signals.

Choices: MAX, STD (standard), MIN (minimum)

MAX

Select MAX for feature films.

STD

Select STD for general use.

MIN

Select MIN for listening to sources at low volume levels.

SET MENU

Center speaker image

0109V340R_40-45_EN(U).p65 03.3.28, 11:54 AM40

English

ADVANCED

OPERATION

SOUND 5 CENTER GEQ (center

graphic equalizer)

Use this feature to adjust the built-in 5-band graphic

equalizer so that the center speaker tonal quality matches

that of the left and right main speakers. You can select the

100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.

Control range (dB): –6 to +6

Initial setting: 0 dB for 5-band

1 Press d to select a higher frequency and u

to select a lower frequency.

2 Press j / i to adjust the level of that

frequency.

Note

• You can monitor the center speaker sound while adjusting this

parameter by using the test tone. Press TEST before starting

the foregoing procedure. Once you begin this procedure, the

test tone remains at the center speaker and you can hear how

the sound changes as you adjust the various frequency levels.

To stop the test tone, press TEST.

SOUND 6

HP TONE CTRL

(headphone tone control)

Use this feature to adjust the level of the bass and treble

when you are using headphones.

Control range (dB):

BASS .................... –6 to +3

TRBL (treble) ....... –6 to +3

Initial setting:

BASS .................... 0 dB

TRBL .................... 0 dB

INPUT 1 I/O ASSIGN (input/

output assignment)

You can assign jacks according to the component to be

used if this unit’s DIGITAL INPUT jack settings

(component names for jacks) differ from those of the

component. This lets you to change the jack assignment

and effectively connect more components.

Once assigned, select that component with INPUT l / h

(or the input selector buttons on the remote control).

■ 1A for OPTICAL INPUT jack

Choices: (1) DVD, MD/CD-R, CD, VCR, V-AUX,

D-TV/CBL

■ 1B for COAXIAL INPUT jack

Choices: (2) CD, VCR, V-AUX, D-TV/CBL,

DVD, MD/CD-R

Note

• When you connect a component to both the COAXIAL and

OPTICAL jacks, priority is given to the input signals from the

COAXIAL jack.

INPUT 2 INPUT MODE

(initial input mode)

Use this feature to designate the input mode for sources

connected to the DIGITAL INPUT jacks when you turn

this unit on (see page 23 for details about the input

mode).

Choices: AUTO, LAST

AUTO

Select this setting to allow the unit to automatically detect

the type of input signal and select the appropriate input

mode.

LAST

Select this setting to set this unit to automatically select

the last input mode used for the respective sources.

SET MENU

0109V340R_40-45_EN(U).p65 03.3.28, 11:54 AM41

OPTION 1 DISPLAY SET

■ DIMMER

Use this to adjust the brightness of the front panel display.

Control range: –4 to 0

OPTION 2 MEM. GUARD

(memory guard)

Use this feature to prevent accidental changes to settings

on the unit.

Choices: ON, OFF

Select ON to protect the following features:

• All set menu items

• Main, center, rear speakers, and subwoofer levels

• DSP program parameters

Notes

• When this item is set to ON, you cannot use the test tone.

• When this item is set to ON, you cannot select any other set

menu items.

OPTION 3 AUDIO MUTE

Adjusts the amount by which the MUTE function reduces

the output volume.

Choices: MUTE, –50dB, –20dB

MUTE

Completely halts all output of sound.

–50dB

Reduces the volume of the present sound output by 50dB.

–20dB

Reduces the volume of the present sound output by 20dB.

SET MENU

0109V340R_40-45_EN(U).p65 03.3.28, 11:54 AM42

English

ADVANCED

OPERATION

REMOTE CONTROL FEATURES

In addition to controlling this unit, the remote control can operate other A/V components made by YAMAHA and other

manufacturers. To control other components, you must set up the remote control with the manufacturer codes.

Control area

■ Controlling this unit

The shaded areas below can be used to control this unit

when the AMP mode is selected. Press AMP to select the

AMP mode.

Input selector buttons switch the

control area for each component.

Component control area

You can control up to 7 different components. You can set up

manufacturer code.

Input selector

buttons

The buttons in the

dotted lines (SYSTEM

POWER, STANDBY,

SLEEP, 6CH INPUT,

VOLUME +/– and

MUTE) function in

any mode.

■ Controlling other component

The shaded areas below can be used to control other

components. Each button has a different function

depending on the selected components. Select the

component to be controlled by pressing an input selector

button.

SYSTEM

POWER

STANDBY

POWER

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

MUTE

6CH INPUT

VOLUME

–

ENTER

+10

STEREO /DTS

8765

432

ENTERTAINMENT

ROCKJAZZHALL

INPUTMUTE

REC

AUDIO

DISC SKIP

–

CHVOL

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

6.1/5.1

NIGHT

TV THTR MOVIE1 MOVIE2MUSIC

SYSTEM

POWER

STANDBY

POWER

ENTER

+10

STEREO /DTS

8765

432

ENTERTAINMENT

ROCKJAZZHALL

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

AMP

CODE SET

MUTE

INPUTMUTE

REC

6CH INPUT

AUDIO

DISC SKIP

VOLUME

–

CHVOL

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

TV THTR MOVIE1 MOVIE2MUSIC

6.1/5.1

NIGHT

Press AMP to control

this unit.

0110V340R_46-49_EN(U).p65 03.3.28, 11:54 AM43

Setting the manufacturer code

You can control other components with the remote

control by setting the appropriate manufacturer code.

The following table shows factory-set component controls

(Library: component category) and the manufacturer code

for each.

1 Press and hold CODE SET. With CODE SET

depressed, press an input selector button to

select the component you want to set up.

Note

• You must press and hold CODE SET throughout this

procedure.

2 With CODE SET depressed, use the numeric

buttons to enter the 3 digit code of your

component’s manufacturer.

• Refer to the LIST OF MANUFACTURER’S

CODES at the end of this manual.

• To reset the code, enter the factory-set code for

each component shown in the above table.

Notes

• If the manufacturer of your component has more than one

code, try each of them until you find the correct one.

• You can only assign one manufacturer code to each input

selector button.

Component

control

(buttons)

MD/CD-R

TUNER*

DVD

D-TV/CBL*

V-AUX

VCR

Component category

(Library)

CD player

CD recorder

Tuner

DVD player

–

Manufacturer

YAMAHA

–

Code

199

499

Fixed

699

–

REMOTE CONTROL FEATURES

ENTER

+10

STEREO /DTS

8765

432

ENTERTAINMENT

ROCKJAZZHALL

AMP

CODE SET

MUTE

INPUTMUTE

REC

6CH INPUT

AUDIO

DISC SKIP

VOLUME

–

CHVOL

SET MENU

LEVEL

TITLE

TV THTR MOVIE1 MOVIE2MUSIC

6.1/5.1

NIGHT

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

AMP

CODE SET

REC

6CH INPUT

AUDIO

DISC SKIP

You can control this unit and other Yamaha tuners only.

You can only set TV manufacturer codes for the D-TV/CBL

buttons.

0110V340R_46-49_EN(U).p65 03.3.28, 11:54 AM44

English

ADVANCED

OPERATION

Controlling other components

You can operate other components if you have set the

manufacturer code for your component in the remote

control. Note, however, that some buttons may not

operate the component correctly.

Once you select an input source, the remote control

switches to the mode for operating the component.

This button functions only when the original remote control of the component has a POWER button.

These buttons can operate your TV without switching the input if the manufacturer code is set in D-TV/CBL.

These buttons can operate your VCR without switching the input to VCR if the manufacturer code is set in VCR.

1 AV POWER

2 TV POWER

REC/DISC SKIP

AUDIO

4 TV CH +

TV CH –

5 TV VOL +

TV VOL –

6 TV MUTE

7 TV INPUT

8 1-9, 0, +10

9 TITLE

0 PRESET/CH u

PRESET/CH d

PRESET/CH j

PRESET/CH i

SELECT

q RETURN

w ENTER

e MENU

r DISPLAY

DVD player

Power

TV power

Disc skip

Play

Search backward

Search forward

Audio

Pause

Skip backward

Skip forward

Stop

TV channel up

TV channel down

TV volume up

TV volume down

TV mute

TV input

Numeric buttons

Title

Down

Left

Right

Select

Return

Title/Index

Display

VCR

Power

TV power

Rec

Play

Search backward

Search forward

Pause

Stop

TV channel up

TV channel down

TV volume up

TV volume down

TV mute

TV input

Numeric buttons

VCR channel up

VCR channel down

Enter

TV, digital/cable TV

VCR power

TV power

VCR rec

VCR play

VCR search backward

VCR search forward

VCR pause

VCR stop

TV channel up

TV channel down

TV volume up

TV volume down

TV mute

TV input

Numeric buttons

Enter

CD player

Power

TV power

Disc skip

Play

Search backward

Search forward

Pause

Skip backward

Skip forward

Stop

TV channel up

TV channel down

TV volume up

TV volume down

TV mute

TV input

Numeric buttons

Index

Display

CD/MD recorder

Power

TV power

Rec (MD)

Play

Search backward

Search forward

Pause

Skip backward

Skip forward

Stop

TV channel up

TV channel down

TV volume up

TV volume down

TV mute

TV input

Numeric buttons

Index

Display

Tuner

Power

TV power

TV channel up

TV channel down

TV volume up

TV volume down

TV mute

TV input

Preset stations (1-8)

Preset up

Preset down

A/B/C/D/E

SYSTEM

POWER

STANDBY

POWER

432

ENTERTAINMENT

ROCKJAZZHALL

V-AUXVCRD-TV/CBLDVD

SLEEPTUNERMD/CD-RCD

AMP

CODE SET

MUTE

INPUTMUTE

REC

6CH INPUT

AUDIO

DISC SKIP

VOLUME

–

CHVOL

ENTER

+10

STEREO /DTS

8765

432

ENTERTAINMENT

ROCKJAZZHALL

MUTE

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

6.1/5.1

NIGHT

TV THTR MOVIE1

MOVIE2

MUSIC

REMOTE CONTROL FEATURES

0110V340R_46-49_EN(U).p65 03.3.28, 11:54 AM45

Using the test tone

Use the test tone to set speaker levels so that the volume

from each speaker is identical when heard from your

listening position.

1 Press AMP.

2 Press TEST.

The unit will output a test tone.

3 Press u / d repeatedly to select a speaker

to adjust.

Each time you press d, the unit will cycle through

the speakers in the following order:

TEST LEFT (main L)→TEST CENTER (center)→

TEST RIGHT (main R)→TEST R SUR. (rear R)→

TEST L SUR. (rear L)→TEST SUBWOOFER

(subwoofer)→.....

(Press u to cycle the speakers in the reverse order.)

4 Press j / i to adjust speaker volumes.

5 Press TEST when you have completed your

adjustment.

The test tone halts.

Notes

• You cannot enter test mode if headphones are connected to the

PHONES jack. Remove the headphones from the PHONES

jack.

• You cannot adjust speaker volumes if the “SOUND 1

SPEAKER SET” parameter on the set menu is set to NON.

• You cannot adjust the subwoofer level if the “1D BASS”

parameter in “SOUND 1 SPEAKER SET” in the set menu is

set to MAIN.

• If you select “BASIC 1 SETUP” in the set menu and then

select “SET”, speaker levels change in response to any

changes you make in “BASIC 1 SETUP”.

• Depending on the source the unit is reproducing, the speaker

levels set with the test tone may not be to your liking. If this is

the case, adjust the speaker levels while listening to the

source.

SETTING THE SPEAKER LEVELS

Adjusting the volume during

playback

You can adjust the volume of the speakers while listening

to sound playback.

1 Press AMP.

2 Press LEVEL repeatedly to select the

speaker you want to adjust.

The unit cycles through the speakers in the following

order each time you press LEVEL:

MAIN L→CENTER→MAIN R→

R SUR. (rear R)→L SUR. (rear L)→

SWFR (subwoofer)→.....

• Pressing LEVEL once opens the level display. Press u / d at

this time to select a speaker.

3 Press j / i to adjust the speaker volume.

• The center and rear speakers can be adjusted by a

maximum of –10dB ~ +10dB.

• The main speakers and subwoofer can be adjusted

by a maximum of –20dB ~ 0dB.

Notes

• You cannot adjust speaker levels if the “SOUND 1 SPEAKER

SET” parameter in the set menu is set to NON.

• You cannot adjust the subwoofer level if the “1D BASS”

parameter in “SOUND 1 SPEAKER SET” in the set menu is

set to MAIN.

• If you use LEVEL to adjust speaker levels, the speaker levels

you previously set with the test tone will also change.

• If you select “BASIC 1 SETUP” in the set menu and then

select “SET”, speaker levels change in response to any

changes you make in ”BASIC 1 SETUP”.

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

AMP

MUTE

INPUTMUTE

VOLUME

–

CHVOL

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

AMP

MUTE

INPUTMUTE

VOLUME

–

CHVOL

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

2,5

0110V340R_46-49_EN(U).p65 03.3.28, 11:54 AM46

English

ADDITIONAL

INFORMATION

SOUND FIELD PROGRAM PARAMETER EDITING

Changing parameter settings

The initial sound field program settings will provide you

with an excellent listening experience as they are. It is not

necessary to alter these settings, but you can create an

original listening environment by doing so.

Note

• The editable parameters vary depending on the sound field

program you select. Refer to the explanation for the parameter.

1 Press AMP.

2 Select a sound field program.

3 Press u / d to select the

parameter you want to

change.

4 Press j / i to change the

parameter setting.

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

AMP

MUTE

INPUTMUTE

VOLUME

–

CHVOL

SET MENU

SELECT

PRESET/CH

A/B/C/D/E

LEVEL

TEST

RETURN

DISPLAY

TITLE

–

AMP

ENTER

+10

STEREO

6.1/5.1

NIGHT

/DTS

8765

MOVIE2MOVIE1TV THTRMUSIC

432

ENTERTAINMENT

ROCKJAZZHALL

SELECT

–

PRESET/CH

SELECT

–

PRESET/CH

5 Repeat steps 2 – 4 if you wish to alter other

parameters.

Note

• You cannot alter these parameters if the “OPTION 2 MEM.

GUARD” parameter in the set menu is set to ON. Change this

setting to OFF if you wish to alter any other parameters.

0120V340R_50-58_EN(U)d.p65 03.4.2, 4:29 PM47

Digital sound field parameter descriptions

You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your

listening room. Not all of the following parameters are found in every program.

■ DSP LEVEL

Function: This parameter adjusts the level of all the DSP effect sounds within a narrow range.

Description: Depending on the acoustics of your listening room, you may want to increase or decrease the DSP

effect level relative to the direct sound.

Control Range: –6 dB to +3 dB

■ DELAY

Function: Adjusts the time difference between the beginning of the sound from the main speakers and the

beginning of the sound effect from the rear speakers. The larger the value, the later the sound effect is

generated.

Control range: 1 to 99 ms (Control range varies depending on the input source and the DSP program you use.)

For 5ch Stereo

Function: These parameters adjust the volume level for each channel in 5-channel stereo mode.

Control range: 0 to 100%

■ CT LEVEL (Center level)

■ RL LEVEL (Rear left level)

■ RR LEVEL (Rear right level)

For PRO LOGIC II Music

■ PANORAMA

Function: Extends the front stereo image to include the surround speakers for a wraparound effect.

Choices: OFF/ON, initial setting is OFF.

■ DIMENSION

Function: Gradually adjusts the soundfield either towards the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).

■ CT WIDTH (Center width)

Function: Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the

center image towards the main left and right speakers.

Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only

from main left and right speakers), initial setting is 3.

SOUND FIELD PROGRAM PARAMETER EDITING

0120V340R_50-58_EN(U)d.p65 03.4.2, 4:29 PM48

English

ADDITIONAL

INFORMATION

TROUBLESHOOTING

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed

below or if the instruction below does not help, set this unit to standby mode, disconnect the power cord, and contact the

nearest authorized YAMAHA dealer or service center.

■ General

Problem

This unit fails to turn

on when STANDBY/

ON (or SYSTEM

POWER) is pressed,

or enters in standby

mode soon after the

power has been

turned on.

No sound.

The sound suddenly

goes off.

No sound / weak

sound from particular

speakers.

No sound from the

effect speakers.

Cause

The power cord is not connected or the

plug is not completely inserted.

The protection circuitry has been

activated.

This unit has been exposed to a strong

external electric shock (such as lightning

and strong static electricity).

Incorrect input or output cable connec-

tions.

No appropriate input source is selected.

The speaker connections are not secure.

The main speakers have not been selected

properly.

The volume is turned down.

The sound is muted.

Digital signals which this unit cannot

reproduce are being received from a

source component e.g.; a CD-ROM.

The protection circuit has been activated

because of a short circuit, etc.

The sleep timer has turned the unit off.

The sound is muted.

Incorrect cable connections.

The sound effect is switched off.

A Dolby Surround, Dolby Digital or DTS

decoding DSP program is being used with

material not encoded with Dolby

Surround, Dolby Digital or DTS.

A digital signal with a sampling

frequency of greater than 48 kHz is input

to this unit.

Remedy

Connect the power cord firmly.

Make sure all speaker wire connections on this unit

and on all speakers are secure and that the wire for

each connection is not touching anything other than

its respective connection.

Set this unit in standby mode, disconnect the power

cord, plug it back in after 30 seconds, then use it

normally.

Connect the cables properly. If the problem persists,

the cables may be defective.

Select an appropriate input source with INPUT l /

h or 6CH INPUT (or the input selector buttons).

Secure the connections.

Press and set SPEAKERS ON/OFF to ON, and select

the proper main speakers with SPEAKERS A/B.

Turn up the volume.

Press MUTE or any operation buttons on the unit to

cancel mute and adjust the volume.

Play a source whose signals this unit can reproduce.

Check the speaker wires are not touching each other

and then turn the unit back on.

Turn on the power, and play the source again.

Press MUTE or any operation buttons on the unit to

cancel a mute and adjust the volume.

Connect the cables properly. If the problem persists,

the cables may be defective.

Press STEREO to turn it on.

Select another DSP program.

Refer to

page

–

15 – 16

–

9 – 16

15 – 16

–

24 – 29

–

0120V340R_50-58_EN(U)d.p65 03.4.2, 4:29 PM49

Problem

No sound from the center

speaker.

No sound from the rear

speakers.

No sound from the

subwoofer.

Poor bass

reproduction.

A “humming” sound can

be heard.

The volume level cannot be

increased, or the sound is

distorted.

The sound effect cannot

be recorded.

The sound field parameters

and some other settings on

the unit cannot be changed.

The unit does not operate

properly.

“CHECK SP WIRES”

appears on the front

panel display.

There is noise interference

from digital or high-frequency

equipment, or this unit.

The unit suddenly turns

into standby mode.

Cause

The output level of the center speaker is

set to minimum.

“SOUND 1A CENTER” on the set menu

is set to NON.

One of the Hi-Fi DSP programs (1 to 4)

has been selected (except for 5ch Stereo).

The source encoded with a Dolby Digital

or DTS signal does not have a center

channel signal.

The output level of the rear speakers is set

to minimum.

A monaural source is being played with

program 9.

“SOUND 1D BASS” on the set menu is

set to MAIN when a Dolby Digital or

DTS signal is being played.

“SOUND 1D BASS” on the set menu is

set to SWFR or MAIN when a 2-channel

source is being played.

The source does not contain low bass

signals (90 Hz and below).

“SOUND 1D BASS” on the set menu is

set to SWFR or BOTH and your system

does not include a subwoofer.

The speaker mode settings (main, center

or rear) on the set menu does not match

your speaker configuration.

Incorrect cable connections.

The component connected to the OUT

(REC) jacks of this unit is turned off.

It is not possible to record the sound

effect with a recording component.

“OPTION 2 MEM. GUARD” in the set

menu is set to ON.

The internal microcomputer has been

frozen by an external electric shock (such

as lightning or excessive static electricity)

or by a power supply with low voltage.

The speaker cables are short circuited.

This unit is too close to the digital or

high-frequency equipment.

The internal temperature has become too

high and the overheat protection circuitry

has been activated.

Remedy

Raise the level of the center speaker.

Select the appropriate mode for your center

speaker.

Select another DSP program.

Raise the output level of the rear speakers.

Select another DSP program.

Select SWFR or BOTH.

Select BOTH.

Select MAIN.

Select the appropriate position for each speaker

based on the size of the speakers in your

configuration.

Firmly connect the audio plugs. If the problem

persists, the cables may be defective.

Turn on the power to the component.

Set “OPTION 2 MEM. GUARD” in the set

menu to OFF.

Disconnect the AC power cord from the outlet

and then plug it in again after about 30 seconds.

Make sure all speaker cables are connected

correctly.

Move this unit further away from such

equipment.

Wait until the unit cools down and then turn it

back on.

Refer to

page

24 – 29

–

24 – 29

–

38 – 39

–

TROUBLESHOOTING

0120V340R_50-58_EN(U)d.p65 03.4.2, 4:29 PM50

English

ADDITIONAL

INFORMATION

■ Tuner

FM stereo reception is

noisy.

There is distortion, and

clear reception cannot

be obtained even with a

good FM antenna.

The desired station

cannot be tuned in with

the automatic tuning

method.

Previously preset

stations can no longer

be tuned in.

The desired station

cannot be tuned in with

the automatic tuning

method.

There are continuous

crackling and hissing

noises.

There are buzzing and

whining noises

(especially in the

evening).

Problem

Cause

The characteristics of FM stereo

broadcasts may cause this problem

when the transmitter is too far away or

the antenna input is poor.

There is multipath interference.

The station is too weak.

The unit has been disconnected for a

long period.

The signal is weak or the antenna

connections are loose.

Noises result from lightning,

fluorescent lamps, motors, thermostats

and other electrical equipment.

A TV set is being used nearby.

Remedy

Check the antenna connections.

Try using a high-quality directional FM

antenna.

Use the manual tuning method.

Adjust the antenna position to eliminate

multipath interference.

Use a high-quality directional FM antenna.

Use the manual tuning method.

Re-store the stations.

Tighten the AM loop antenna connections and

orient it for best reception.

Use the manual tuning method.

Use an outdoor antenna and a ground wire.

This will help somewhat, but it is difficult to

eliminate all noise.

Move this unit away from the TV.

Refer to

page

–

■ Remote control

Problem

The remote control does

not work nor function

properly.

Cause

Wrong distance or angle.

Direct sunlight or lighting (from an

inverter type of fluorescent lamp, etc.) is

striking the remote control sensor of this

unit.

The batteries are weak.

The manufacture code has not correctly

set.

Even if the manufacturer code is correctly

set, there are some models that do not

respond to the remote control.

Remedy

The remote control will function within a

maximum range of 6 m (20 feet) and no more

than 30 degrees off-axis from the front panel.

Reposition this unit.

Replace all batteries with new ones.

Set the code correctly.

Try setting another code of the same manufac-

turer.

Refer to

page

–

TROUBLESHOOTING

0120V340R_50-58_EN(U)d.p65 03.4.2, 4:29 PM51

GLOSSARY

■ Dolby Surround

Dolby Surround uses a 4 channel analog recording system

to reproduce realistic and dynamic sound effects: 2 main

left and right channels (stereo), a center channel for

dialog (monaural), and a rear channel for special sound

effects (monaural). The rear channel reproduces sound

within a narrow frequency range.

Dolby Surround is widely used with nearly all video tapes

and laser discs, and in many TV and cable broadcasts as

well. The Dolby Pro Logic decoder built into this unit

employs a digital signal processing system that

automatically stabilizes the volume on each channel to

enhance moving sound effects and directionality.

■ Dolby Digital

Dolby Digital is a digital surround sound system that

gives you completely independent multi-channel audio.

With 3 front channels (left, center, and right), and 2 rear

stereo channels, Dolby Digital provides 5 full-range audio

channels. With an additional channel especially for bass

effects, called LFE (low frequency effect), the system has

a total of 5.1 channels (LFE is counted as 0.1 channel).

By using 2-channel stereo for the rear speakers, more

accurate moving sound effects and surround sound

environment are possible than with Dolby Surround. The

wide dynamic range (from maximum to minimum

volume) reproduced by the 5 full-range channels and the

precise sound orientation generated using digital sound

processing provide listeners with previously unheard of

excitement and realism.

With this unit, any sound environment from monaural up

to a 5.1-channel configuration can be freely selected for

your enjoyment.

■ Matrix 6.1

The unit incorporates Matrix 6.1 decoder for Dolby

Digital and DTS multi-channel software that enables 6.1-

channel reproduction by adding the rear center channel to

existing 5.1-channel format. (The rear center channel is

created from rear left and right channels, and outputted

from virtual rear center speaker.) With this additional

channel, you can experience more dynamic and realistic

moving sound especially with scenes with “fly-over ” and

“fly-around ” effects.

■ Dolby Pro Logic II

Dolby Pro Logic II is an improved technique used to

decode vast numbers of existing Dolby Surround

software. This new technology enables a discrete 5-

channel playback with 2 main left and right channels, 1

center channel, and 2 rear left and right channels (instead

of only 1 rear channel for conventional Pro Logic

technology). A music mode is also available for 2-channel

sources in addition to the movie mode.

■ DTS (Digital Theater Systems) Digital

Surround

DTS digital surround was developed to replace the analog

soundtracks of movies with a 6-channel digital sound

track, and is now rapidly gaining popularity in movie

theaters around the world. Digital Theater Systems Inc.

has developed a home theater system so that you can

enjoy the depth of sound and natural spatial

representation of DTS digital surround in your home.

This system produces practically distortion-free 6-channel

sound (technically, a left, right and center channels, 2 rear

channels, plus an LFE 0.1 channel as a subwoofer, for a

total of 5.1 channels).

■ LFE 0.1 channel

This channel is for the reproduction of low bass signals.

The frequency range for this channel is 20 Hz to 120 Hz.

This channel is counted as 0.1 because it only enforces a

low frequency range compared to the full-range

reproduced by the other 5 channels in a Dolby Digital or

DTS 5.1 channel systems.

■ CINEMA DSP

Since the Dolby Surround and DTS systems were

originally designed for use in movie theaters, their effect

is best felt in a theater having many speakers and

designed for acoustic effects. Since home conditions,

such as room size, wall material, number of speakers, and

so on, can differ so widely, it’s inevitable that there are

differences in the sound heard as well. Based on a wealth

of actually measured data, YAMAHA CINEMA DSP uses

YAMAHA original sound field technology to combine

Dolby Pro Logic, Dolby Digital and DTS systems to

provide the visual and audio experience of movie theater

in the listening room of your own home.

■ SILENT CINEMA

YAMAHA has developed a natural, realistic sound effect

DSP algorithm for headphones.

Parameters for headphones have been set for each sound

field so that accurate representations of all the sound field

programs can be enjoyed using headphones.

■ Virtual CINEMA DSP

YAMAHA has developed a virtual CINEMA DSP

algorithm that allows you to enjoy DSP sound field

surround effects even without any rear speakers by using

virtual rear speakers.

It is even possible to enjoy virtual CINEMA DSP using a

minimal 2-speaker system that does not include a center

speaker.

0120V340R_50-58_EN(U)d.p65 03.4.2, 4:29 PM52

English

ADDITIONAL

INFORMATION

■ PCM (Linear PCM)

Linear PCM is a signal format under which an analog

audio signal is digitized, recorded and transmitted without

using any compression. This is used as a method of

recording CDs and DVD audio. The PCM system uses a

technique for sampling the size of the analog signal per

very small unit of time. Standing for “pulse code

modulation”, the analog signal is encoded as pulses and

then modulated for recording.

■ Sampling frequency and number of

quantized bits

When digitizing an analog audio signal, the number of

times the signal is sampled per second is called the

sampling frequency, while the degree of fineness when

converting the sound level into a numeric value is called

the number of quantized bits.

The range of rates that can be played back is determined

based on the sampling rate, while the dynamic range

representing the sound level difference is determined by

the number of quantized bits. In principle, the higher the

sampling frequency, the wider the range of frequencies

that can be played back, and the higher the number of

quantized bits, the more finely the sound level can be

reproduced.

GLOSSARY

0120V340R_50-58_EN(U)d.p65 03.4.2, 4:29 PM53

SPECIFICATIONS

FM SECTION

• Tuning Range

[U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz

[Other models] .............................................. 87.50 to 108.00 MHz

• 50 dB Quieting Sensitivity (IHF, 100% mod.)

Mono/Stereo ........................ 2.0 µV (17.3 dBf) /25 µV (39.2 dBf)

• Selectivity (400 kHz) ............................................................... 70 dB

• Signal to Noise Ratio (IHF)

Mono/Stereo .............................................................. 76 dB/70 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo ................................................................. 0.2%/0.3%

• Stereo Separation (1 kHz) ....................................................... 42 dB

• Frequency Response ........................... 20 Hz to 15 kHz +0.5, –2 dB

AM SECTION

• Tuning Range ......................................... 530/531 to 1710/1611 kHz

• Usable Sensitivity ............................................................. 300 µV/m

GENERAL

• Power Supply

[U.S.A. and Canada models] ............................... AC 120 V/60 Hz

[Australia model] ................................................. AC 240 V/50 Hz

[U.K., Europe and Singapore models] ................ AC 230 V/50 Hz

[Korea model] ...................................................... AC 220 V/60 Hz

[China model] ...................................................... AC 220 V/50 Hz

[General model] .................... AC 110-120 V/220-240 V, 50/60 Hz

• Power Consumption

[U.S.A. and Canada models] .................................. 210 W/280 VA

[Other models] ..................................................................... 210 W

Standby Mode ........................................................... 0.8 W or less

• Dimension (W x H x D) ................................... 435 x 151 x 322 mm

(17-1/8” x 5-15/16” x 12-11/16”)

• Weight ................................................................. 8 kg (17 lbs 10 oz)

*Specifications are subject to change without notice.

AUDIO SECTION

• Minimum RMS Output Power for Main, Center, Rear

1 kHz, 0.1% THD, 6 Ω

[U.S.A. and Canada models] ................................................. 70 W

[Other models] ....................................................................... 60 W

1 kHz, 0.7% THD, 6 Ω

[U.S.A. and Canada models] ................................................. 75 W

[U.K., Europe, Australia and Korea models] ......................... 65 W

• DIN Standard Output Power

[Europe model]

1 kHz, 0.7% THD, 4 Ω .......................................................... 75 W

• Maximum Power (EIAJ)

[China, Korea and General models]

1 kHz, 10% THD, 6 Ω ........................................................... 80 W

• Dynamic Power (IHF, 6/4/2 Ω)

[U.S.A. and Canada models] ................................... 85/100/115 W

[Other models] ........................................................... 75/95/105 W

• Frequency Response

CD, etc. to Main L/R .............................. 10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

1 kHz, 30 W, 6 Ω, Main L/R ................................................. 0.06%

• Signal to Noise Ratio (IHF-A Network)

CD (250 mV, shorted) to Main L/R, Effect Off .............. h100 dB

• Residual Noise (IHF-A Network)

Main L/R ................................................................ 150 µV or less

• Channel Separation (1 kHz/10 kHz)

CD, etc. (5.1 kΩ terminated) to Main L/R ........ h60 dB/h45 dB

• Tone Control (Main L/R)

BASS Boost/Cut .................................................... ±10 dB/100 Hz

TREBLE Boost/Cut ............................................... ±10 dB/20 kHz

• Phones Output ........................................................... 300 mV/470 Ω

• Input Sensitivity

CD, etc. ................................................................... 150 mV/47 kΩ

6CH INPUT ............................................................ 150 mV/47 kΩ

• Output Level

OUT (REC) ........................................................... 150 mV/1.2 kΩ

OUTPUT SUBWOOFER ............................................. 4 V/1.2 kΩ

VIDEO SECTION

• Video Signal Type ...................................................... NTSC or PAL

• Composite Video Signal Level ...................................... 1 Vp-p/75 Ω

• Signal to Noise Ratio ........................................................... h 50 dB

• Frequency Response (MONITOR OUT)

............................................................... 5 Hz to 10 MHz, –3 dB

0120V340R_50-58_EN(U)d.p65 03.4.2, 4:29 PM54

LIST OF MANUFACTURER’S CODES

Yamaha 299 292

Admiral 292 293

Aiwa 294 276 283 284

Akai 295 296

Alba 296

AOC 297

Bell&Howell 292

Bestar 298

Blaupunkt 229 222

Blue sky 298

Brandt 223

Brocsonic 297

Bush 296

Clatronic 298

Craig 224

Croslex 225

Curtis Mathis 297 226

Daewoo 297 298 224 227 228

Daytron 239

Dual 298

Emerson 297 224 239 232

Ferguson 223 265 266

First line 298

Funai 277 278

Fisher 295 233

Fraba 298

GE 293 297 234 235 236

LG/Goldstar 297 298 239 237

Goodmans 296 298 223

Grundig 229 238 249

Hitachi 297 239 242 243 285

ICE 296

Irradio 296

Itt/Nokia 244 245

JC Penny 293 297 234 237

JVC 296 246 247 286

Kendo 298

KTV 297 239

Loewe 298 248

LXI 293 297 225 226 233

Magnavox 297 225 239

Matsui 295

Mitsubishi 299 297 259 287

NEC 297 252 282

Nokia 244 245

Nokia Oceanic 245

Nordmende 265 266

Onwa 296

Panasonic 234 235 236 253 288 211

Philco 297 225 239

Philips 225

Pioneer 226 235 254 255 268

Portland 297 256

Quasar 234 235

Radio Shack 299 293 297

RCA 293 297 234 256 257 258

SABA 223 269 265 266

Samsung 297 239 248 262 275

Sanyo 295 233 279 272 273 274 212

Schneider 296

Scott 297

Sharp 292 239 232 213

Siemens 229

Signature 292

Sony 263 214

Sylvania 297 225

Telefunken 269 264 265 266

Thomson 223 266

Toshiba 292 226 267 215

Videch 297 242

Wards 297 239 232

VCR

Yamaha 399 392 393 394

Admiral 395

Aiwa 396 397 398 329

Akai 322 323 324

Audio Dynamic 392 394

Bell&Howell 393

Blaupunkt 325 326

Brocsonic 327

Bush 322

Canon 325 328

CGM 396 332

Citizen 396

Craig 396

Curtis Mathis 397 328 333

Daewoo 328 334 335

DBX 392 394

Dimensia 333

Emerson 327 334

Fisher 393 336

Funai 397

GE 328 333 387

LG/Goldstar 396 388

Goodmans 334 337

Grundig 332 338

Hitachi 325 333 349 342 343

Instant Replay 325 328

Itt/Nokia 393

JC Penny 392 393 394 328 333 349

JVC 392 394 344 345 346 347

Kendo 396

Kenwood 392 394 396

Loewe 396 337

Luxor 395

LXI 393 396 397 336 349

Magnavox 325 326 328

Marantz 392 394

Marta 396

Matsui 396

Memorex 328 336

Minolta 333 349

Mitsubishi 399 344 348 359 352 353

Multitech 397 348 354

NEC 392 394 344 383

Nokia 393 395

Nokia Oceanic 395

Okano 323

Olympic 325 328

Orion 327

Panasonic 325 328 355 378 384 385 386

Pentax 333 349

Philco 325 328

Philips 325 326 328 337 356 357

Phonola 337

Pioneer 325

Quasar 325 328

RCA/PROSCAN 325 326 328 333 335 349 358 369

Realistic 393 397 328 336 359 362

Samsung 354 358 363 364 365 366

Sansui 394

Sanyo 393 336 367

Schneider 337

200V340U_manucode-b.p65 03.4.2, 4:33 PM1

Scott 399 335 336 348 359 352 354

358

Seleco 322

Sharp 395 362 382

Siemens 393

Signature 2000 395 397

Sony 368 379 372 373 374 375

Sylvania 397 325 326 328

Symphonic 397

Tandberg 334

Tashiro 396

Tatung 392 394

Teac 392 394 397

Technics 325 328

Telefunken 376 377

Thorn 393 396

Toshiba 335 369 389

Universum 396 327 376

W.WHouse 396

Wards 395 396 336 362

DVD player

Yamaha 699 622 623 647

DENON 623 624

Funai 625

HITACHI 626

JVC 627

KENWOOD 628

Mitsubishi 629

Onkyo 632 633 634

Panasonic 623 635

Philips 699 647

Pioneer 636 637 638

RCA 639

Samsung 642

Sharp 643

Sony 644

Toshiba 634

LG/GOLD STAR 645

THOMSON 646

MD Recorder

Yamaha 599

CD player

Yamaha 199

CD Recorder

Yamaha 499

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in China

WB14620

200V340U_manucode-b.p65 03.4.2, 4:33 PM2

Documenttranscriptie

U HTR-5630 AV Receiver OWNER’S MANUAL 0100V340(U)-cv1 1 03.3.10, 3:54 PM IMPORTANT SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1 2 3 4 5 6 7 8 9 11 Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and use instructions should be followed. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 12 13 14 15 16 17 18 19 Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization – This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, I CAUTION 0101RX-V340_Cau_EN-U.p65 2 03.3.28, 11:53 AM d) 20 21 22 23 If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 24 Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING MAST ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810–20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810–21) GROUND CLAMPS Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H) NEC – NATIONAL ELECTRICAL CODE FCC INFORMATION (for US customers) 1. 2. 3. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. CAUTION II 0101RX-V340_Cau_EN-U.p65 3 03.3.28, 11:53 AM CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. 5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: – Other components, as they may cause damage and/or discoloration on the surface of this unit. – Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury. – Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit. 6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury. 7 Do not plug in this unit to a wall outlet until all connections are complete. 8 Do not operate this unit upside-down. It may overheat, possibly causing damage. 9 Do not use force on switches, knobs and/or cords. 10 When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord. 11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified. 13 To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm. 14 Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons. 15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet. 16 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that this unit is faulty. 17 Before moving this unit, press STANDBY/ON to set this unit in standby mode, and disconnect the AC power plug from the wall outlet. 18 VOLTAGE SELECTOR (General model only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110V-120V, 220V-240V AC, 50/60 Hz. This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called standby mode. In this state, this unit is designed to consume a very small quantity of power. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. IMPORTANT Please record the serial number of this unit in the space below. MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. III CAUTION 0101RX-V340_Cau_EN-U.p65 4 03.4.1, 4:14 PM CONTENTS CONTENTS ............................................................ 1 FEATURES ............................................................. 2 GETTING STARTED ............................................ 3 Supplied accessories .................................................. 3 Installing batteries in the remote control ................... 3 CONTROLS AND FUNCTIONS ......................... 4 PREPARATION CONNECTIONS .................................................... 9 BASIC SYSTEM SETTINGS ............................. 18 Using the basic menu .............................................. 18 Setting the unit to match your speaker system ........ 20 Setting speaker output levels (SP LEVEL) ............. 20 Set menu list ............................................................ 37 Adjusting the items on the set menu ....................... 37 SOUND 1 SPEAKER SET (speaker mode settings) ............................................................................. 38 SOUND 2 SP DISTANCE (speaker distance) ........ 40 SOUND 3 LFE LEVEL .......................................... 40 SOUND 4 D. RANGE (dynamic range) ................. 40 SOUND 5 CENTER GEQ (center graphic equalizer) .................................... 41 SOUND 6 HP TONE CTRL (headphone tone control) .................................... 41 INPUT 1 I/O ASSIGN (input/output assignment) .. 41 INPUT 2 INPUT MODE (initial input mode) ........ 41 OPTION 1 DISPLAY SET ...................................... 42 OPTION 2 MEM. GUARD (memory guard) ......... 42 OPTION 3 AUDIO MUTE ..................................... 42 REMOTE CONTROL FEATURES ................... 43 Control area ............................................................. 43 Setting the manufacturer code ................................. 44 Controlling other components ................................. 45 BASIC OPERATION Before connecting components ................................. 9 Connecting video components ................................ 10 Connecting audio components ................................ 11 Connecting the antennas .......................................... 12 Connecting an external decoder .............................. 13 Connecting the speakers .......................................... 14 Connecting the power supply cords ........................ 17 Turning on the power .............................................. 17 SET MENU ........................................................... 37 PREPARATION Front panel ................................................................. 4 Remote control .......................................................... 6 Front panel display .................................................... 8 INTRODUCTION ADVANCED OPERATION INTRODUCTION SETTING THE SPEAKER LEVELS ................ 46 Adjusting the volume during playback ................... 46 Using the test tone ................................................... 46 ADDITIONAL INFORMATION PLAYBACK .......................................................... 21 Input modes and indications .................................... 23 Selecting a sound field program .............................. 24 DIGITAL SOUND FIELD PROCESSING (DSP) ............................................................................ 27 Understanding sound fields ..................................... 27 Hi-Fi DSP programs ................................................ 27 SOUND FIELD PROGRAM PARAMETER EDITING .......................................................... 47 ADVANCED OPERATION BASIC OPERATION Changing parameter settings ................................... 47 Digital sound field parameter descriptions .............. 48 TROUBLESHOOTING ....................................... 49 GLOSSARY .......................................................... 52 SPECIFICATIONS .............................................. 54 ADDITIONAL INFORMATION CINEMA-DSP ...................................................... 28 Sound design of CINEMA-DSP ............................. 28 CINEMA-DSP Programs ........................................ 28 Sound field effects ................................................... 30 TUNING ................................................................ 31 Presetting stations .................................................... 32 Selecting a preset station ......................................... 34 SLEEP TIMER ..................................................... 35 RECORDING ....................................................... 36 English 1 0103V340R_01-08_EN(U).p65 1 03.4.2, 4:27 PM FEATURES Built-in 5-channel power amplifier ◆ Minimum RMS output power (0.1% THD, 1 kHz, 6Ω) [U.S.A. and Canada models] Main: 70 W + 70 W Center: 70 W Rear: 70 W + 70 W [Other models] Main: 60 W + 60 W Center: 60 W Rear: 60 W + 60 W Multi-mode digital sound field processing ◆ Dolby Pro Logic/Dolby Pro Logic II decoder ◆ Dolby Digital/Dolby Digital + Matrix 6.1 Decoder ◆ DTS/DTS + Matrix 6.1 Decoder ◆ CINEMA DSP: Combination of YAMAHA DSP technology and Dolby Pro Logic, Dolby Digital or DTS ◆ Virtual CINEMA DSP ◆ SILENT CINEMA DSP Sophisticated AM/FM Tuner ◆ 40-Station random access preset tuning ◆ Automatic preset tuning ◆ Preset station shifting capability (Preset editing) Other features ◆ 96 kHz/24-bit D/A converter ◆ Set menu for optimizing this unit for your Audio/ Video system ◆ Test tone generator for easier speaker balance adjustment ◆ 6-channel external decoder input ◆ Optical and coaxial digital audio signal jacks ◆ Sleep timer ◆ Remote control with preset manufacturer codes ■ About this manual • y indicates a tip for your operation. • Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button names differ between the main unit and the remote control, the button name on the remote control is given in parentheses. • This manual is printed prior to production. Design and specifications are subject to change in part for the reason of the improvement in operativity ability, and others. In this case, the product has priority. Manufactured under license from Dolby Laboratories. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. 2 0103V340R_01-08_EN(U).p65 2 03.3.28, 11:54 AM GETTING STARTED INTRODUCTION Supplied accessories After unpacking, check that the following parts are contained. Remote control Batteries (2) (AA, R06, UM-3) Indoor FM antenna (U.S.A., Canada, China, Korea and General models) AM loop antenna (Europe, U.K., Australia and Singapore models) SYSTEM POWER POWER TV AV CD STANDBY POWER MD/CD-R TUNER DVD D-TV/CBL SLEEP VCR V-AUX 6CH INPUT REC AUDIO DISC SKIP CODE SET AMP TV + VOL + + CH VOLUME – – MUTE INPUT – MUTE HALL 1 MUSIC 5 /DTS 9 JAZZ ROCK 2 3 TV THTR MOVIE1 ENTERTAINMENT 4 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER LEVEL SET MENU TITLE MENU A/B/C/D/E – SELECT + TEST DISPLAY RETURN PRESET/CH Installing batteries in the remote control Insert the batteries in the correct direction by aligning the + and – marks on the batteries with the polarity markings (+ and –) inside the battery compartment. 2 1 3 Press the part marked with a and slide off the battery compartment cover. 2 Insert the two batteries supplied (AA, R06, UM-3) according to the polarity markings on the inside of the battery compartment. 3 Slide the cover back on so that it snaps into place. • Change all of the batteries if you notice a decrease in the operating range of the remote control. • Do not use old batteries together with new ones. • Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color. • If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the manufacturer code and program any acquired functions that may have been cleared. English 1 ■ Notes on batteries 3 0103V340R_01-08_EN(U).p65 3 03.3.28, 11:54 AM CONTROLS AND FUNCTIONS Front panel 1 2 3 45 67 8 VOLUME RDS MODE/FREQ EON PRESET/TUNING FM/AM EDIT STANDBY /ON PTY SEEK MODE START TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM INPUT MODE SILENT 6CH INPUT SPEAKERS ON A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE y u INPUT PHONES 9 0 qw e RDS MODE/FREQ r t i o p EON PTY SEEK MODE START as df (U.K. and Europe models only) 1 STANDBY/ON Turns the unit on, or sets it in standby mode. When you turn the unit on, you will hear a click and there will be a 4 to 5-second delay before it can reproduce sound. Standby mode In this mode, the unit uses a small amount of power in order to receive infrared-signals from the remote control. 2 Remote control sensor Receives signals from the remote control. 3 Front panel display Shows information about the operational status of the unit. 4 TUNING MODE (AUTO/MAN’L MONO) Switches the tuning mode between automatic and manual. 5 PRESET/TUNING (EDIT) Switches the function of PRESET/TUNING l / h between selecting a preset station number and tuning (the colon (:) turns on or off). This button is also used to exchange the assignment of two preset stations with each other. 6 FM/AM Switches the reception band between FM and AM. 7 MEMORY (MAN’L/AUTO FM) Stores the current station in memory. 8 VOLUME Controls the output level of all audio channels. This does not affect the OUT (REC) level. 9 SILENT (PHONES jack) Allows you to enjoy DSP effects when listening with headphones. Inserting the plug from your headphones into the PHONES jack does not affect the sound output from the speakers. If you wish to stop the signal output to the speakers, press SPEAKERS ON/OFF so that it is in the OFF position. 0 SPEAKERS ON/OFF Turns on or off the speakers that you selected by SPEAKERS A/B. q SPEAKERS A/B Selects the set of main speakers connected to the A or B terminals. 4 0103V340R_01-08_EN(U).p65 4 03.3.28, 11:54 AM CONTROLS AND FUNCTIONS (U.K. and Europe models only) e PROGRAM l / h Select the DSP program. a RDS MODE/FREQ Press this button when the unit is receiving an RDS station, to cycle the display mode among PS mode, PTY mode, RT mode, CT mode (if the station offers those RDS data service) and/or frequency display mode in turn. r A/B/C/D/E Selects preset station groups A to E when the unit is in tuner mode. s PTY SEEK MODE Press this button to set the unit in the PTY SEEK mode. NEXT Selects the set menu mode when the unit is not in tuner mode. d PTY SEEK START Press this button to begin searching for a station after the desired program type has been selected in the PTY SEEK mode. t PRESET/TUNING l / h Select preset station numbers 1 to 8 when a colon (:) is displayed in the front panel display. Select the tuning frequency when a colon (:) is not displayed when the unit is in tuner mode. INTRODUCTION w STEREO (EFFECT) Switches between normal stereo and DSP effect reproduction. When you select STEREO, the unit mixes down all Dolby Digital and DTS signals (except the LFE channel) as well as those 2-channel signals without effects, to the main left and right speakers. f EON Press this button to select a radio program type (NEWS, INFO, AFFAIRS, SPORT) to tune in automatically. SET MENU –/+ Adjust settings on the set menu when the unit is not in tuner mode. y CONTROL Switches between Bass (low-frequency response) control mode and Treble (high-frequency response) control mode. u BASS/TREBLE –/+ Increase or decrease low/high-frequency response when the unit is in Bass/Treble control mode. The sound changes 2dB each time you press one of these buttons. Control range: –10 to +10dB. i INPUT MODE Sets the priority for the types of input signals (AUTO, DTS, ANALOG) received when one component is connected to two types of input jacks. You cannot set priority for an audio sources if you have selected 6CH INPUT as the input source. o INPUT l / h Selects the input source you want to listen to or watch. p 6CH INPUT Selects the audio source connected to the 6CH INPUT jacks. This selection takes priority over sources selected with INPUT (or the input selector buttons on the remote control). English 5 0103V340R_01-08_EN(U).p65 5 03.3.28, 11:54 AM CONTROLS AND FUNCTIONS Remote control This section describes the controls and functions of the remote control when it is set in AMP mode. Please make sure to select AMP mode before beginning operation. 2 Input selector buttons Select the input source and set the remote control to operate the selected source component. 7 1 3 DSP program Select DSP programs when the remote control is in AMP mode. Press one of these buttons repeatedly to select a DSP program within a program group. SYSTEM POWER POWER TV AV CD 2 DVD STANDBY POWER 8 MD/CD-R TUNER SLEEP D-TV/CBL V-AUX VCR 4 LEVEL Selects the effect speaker channel to adjust. 9 5 Multi control section Used to change and implement settings. 6CH INPUT REC 0 AUDIO DISC SKIP CODE SET w 6 TEST Outputs a test tone for use when adjusting the speaker levels. e 7 STANDBY Sets this unit in standby mode. r 8 SYSTEM POWER Turns on the power of the unit. q AMP TV + + + VOL CH VOLUME – – – MUTE INPUT MUTE 3 HALL JAZZ ROCK 1 2 3 MUSIC 5 /DTS 9 4 TV THTR MOVIE1 ENTERTAINMENT 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER LEVEL SET MENU TITLE MENU – SELECT 9 SLEEP Sets the sleep timer. 4 MOVIE2 A/B/C/D/E 5 1 Infrared emitter Outputs infrared control signals. Aim this emitter at the component you want to operate. + t y i u 0 6CH INPUT Selects the audio source connected to the 6CH INPUT jacks. q CODE SET Used to set up manufacturer codes (see page 44). TEST 6 DISPLAY RETURN PRESET/CH w AMP Switches control from a previously selected component by using the input selector buttons to this unit. e VOLUME +/– Increases or decreases the volume level. 6 0103V340R_01-08_EN(U).p65 6 03.3.28, 11:54 AM CONTROLS AND FUNCTIONS r MUTE Mutes the sound. Press again to restore the audio output to the previous volume level. VOLUME PRESET/TUNING FM/AM EDIT STANDBY /ON TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM INPUT MODE SILENT 6CH INPUT SPEAKERS ON A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE INPUT PHONES y STEREO Switches between normal stereo and DSP effect reproduction. When you select STEREO the unit mixes down all Dolby Digital and DTS signals (except the LFE channel) as well as those 2-channel signals without effect sounds, to the main left and right speakers. 30° 30° Approximately 6 m (20 feet) INTRODUCTION t 6.1/5.1 Switches on or off the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder. ■ Using the remote control SYSYTEM POWER POWER TV AV CD STANDBY POWER MD/CD-R TUNER DVD D-TV/CBL SLEEP VCR V-AUX 6CH INPUT REC AUDIO DISC SKIP CODE SET AMP TV + + + VOL CH VOLUME – MUTE – – INPUT MUTE HALL JAZZ 1 2 TV SPORTS MONO MOVIE 5 ROCK 3 6 ENTERTAINMENT 4 1 - MOVIE THTR - 2 7 8 /DTS - SELECT MATRIX 6.1 STEREO 9 u NIGHT Sets the unit in night listening mode. i SET MENU Selects the set menu mode. 0 +10 LEVEL ENTER SET MENU TITLE MENU A/B/C/D/E – SELECT + TEST DISPLAY RETURN PRESET/CH The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation. ■ Handling the remote control • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following types of conditions: – high humidity or temperature such as near a heater, stove or bath; – dusty places; or – in places subject to extremely low temperatures. English 7 0103V340R_01-08_EN(U).p65 7 03.3.28, 11:54 AM CONTROLS AND FUNCTIONS Front panel display 1 2 3 4 VCR VIRTUAL MATRIX DIGITAL SILENT PCM PL PL 9 V-AUX D-TV/CBL 6 5 DVD MD/CD-R 7 TUNER ~~~~~~~~~~~~~~ w e CD MUTE VOLUME PS PTY RT CT STEREO AUTO SLEEP EON PTY HOLD TUNED MEMORY NIGHT HiFi DSP 0q 8 r L C R ft dB t y u i LFE RL RC RR o p a (U.K. and Europe models only) 1 Processor indicators The indicators for the various decoders light up when the decoders are in use. w NIGHT indicator Lights up when the unit is set to night listening mode. 2 VIRTUAL indicator Lights up when using Virtual CINEMA DSP. e HiFi DSP indicator Lights up when you select a Hi-Fi DSP sound field program. 3 Headphones indicator Lights up when headphones are connected to the headphone jack. r CINEMA DSP indicator Lights up when you select a CINEMA DSP sound field program. 4 Input source indicator Highlights the current input source with a cursor. t STEREO indicator Lights up when the unit is receiving a strong signal from a FM stereo broadcast while the “AUTO” indicator is lit. 5 Sound field indicator Displays the sound field management the unit is using when you listen to a DSP sound field program. y TUNED indicator Lights up when this unit is tuned to a radio station. 6 AUTO indicator Shows that this unit is in the automatic tuning mode. u MEMORY indicator Flashes to show a station can be stored in memory. 7 MUTE indicator Flashes while the MUTE function is on. i SLEEP indicator Lights up while the sleep timer is on. 8 VOLUME level indicator Indicates the volume level. o LFE indicator Lights up when the input signal contains an LFE signal. 9 PCM indicator Lights up when this unit is reproducing PCM (pulse code modulation) digital audio signals. p Input channel indicator The indicators for the appropriate sound channels light up when a digital signal from a source is played back. 0 SILENT indicator Lights up when headphones are connected and the digital sound field processor is on. a RDS indicator (U.K. and Europe models only) The name(s) of the RDS data offered by the currently received RDS station light(s) up. EON indicator lights up when an RDS station that offers the EON data service is being received. PTY HOLD indicator lights up while searching for stations in the PTY SEEK mode. q Multi-information display Shows the current DSP program name and other information when you are adjusting or changing settings. 8 0103V340R_01-08_EN(U).p65 8 03.3.28, 11:54 AM CONNECTIONS Before connecting components CAUTION Do not connect this unit or other components to the mains power until all connections between the components have been completed. This unit has digital jacks for direct transmission of digital signals through either a coaxial or fiber optic cable. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. Use digital connections if you wish to enjoy the multi-channel sound track of DVD material, etc. with DSP effects. Both digital input jacks are acceptable for 96 kHz sampling digital signals. Note • The OPTICAL jack on this unit conform to the EIA standard. If you use a fiber optic cable that does not conform to this standard this unit may not function properly. PREPARATION • Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Some components require different connection methods and have different jack names. Refer to the operation instructions for each component you wish to connect to this unit. • After you have completed all connections, check them again to make sure they are correct. • The jack names correspond to the names on the input selector. ■ Connecting to digital jacks DIGITAL INPUT jacks (pages 9 – 11) Audio component jacks (page 11) AUDIO R Video component jacks (page 10) AUDIO L R VIDEO Speaker terminals (page 16) TUNER SPEAKERS L CLASS 2 WIRING CD DVD IN D-TV /CBL A R MAIN L AM ANT (PLAY) MD /CD-R OUT DIGITAL INPUT (REC) V-AUX MAIN IN VCR DVD L FM ANT CENTER OUT SURROUND REAR (SURROUND) MAIN A OR B : 6Ω MIN./SPEAKER COAXIAL OPTICAL MAIN 75Ω UNBAL. 2 CD B R GND R L 1 SUB WOOFER SUB WOOFER MONITOR OUT CENTER 6CH INPUT CENTER : 6Ω MIN./SPEAKER REAR : 6Ω MIN./SPEAKER OUTPUT This jack is reserved for factory use. Do not connect any equipment to this jack. 6CH INPUT jacks (page 13) Antenna input terminals (page 12) SUBWOOFER OUTPUT jack (page 16) English 9 0104V340R_09-18_EN(U).p65 9 03.3.28, 11:54 AM CONNECTIONS ■ Connecting another video component Connecting video components Connect the video signal output jack on your component to the VIDEO jack on this unit. Connect the audio signal output jacks on the component to the AUDIO jacks on this unit. ■ Connecting a video monitor Connect the video input jack on your video monitor to the MONITOR OUT VIDEO jack. ■ Connecting a DVD player ■ Connecting a recording component Connect the audio signal input jacks on your video component to the AUDIO OUT jacks on this unit. Then connect the video signal input jack on the video component to the VIDEO OUT jack on this unit for picture recording. Connect the audio signal output jacks on your component to the AUDIO IN jacks on this unit. Then connect the video signal output jack on the component to the VIDEO IN jack on this unit to play a source from your recording component. Connect the optical digital audio signal output jack on your component to the DIGITAL INPUT jack and connect the video signal output jack on the component to the VIDEO jack on this unit. y • Use the AUDIO jacks on this unit for a video component which does not have optical digital output jack. However, multi-channel reproduction cannot be obtained with audio signals input from the AUDIO jacks. Note ■ Connecting a digital TV/cable TV Connect the video signal output jack on your component to the VIDEO jack on this unit. Connect the audio signal output jacks on the component to the AUDIO jacks on this unit. • Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is off, this unit may distort the sound from other components. TV/digital TV/ cable TV DVD player Another video component O OPTICAL OUTPUT L R AUDIO OUTPUT AUDIO R V AUDIO L R VIDEO OUTPUT VIDEO VIDEO OUTPUT V L R VIDEO OUTPUT AUDIO OUTPUT V L R AUDIO OUTPUT TUNER L CD DVD IN D-TV /CBL AM ANT (PLAY) GND MD /CD-R OUT DIGITAL INPUT CD (REC) V-AUX MAIN IN 75Ω UNBAL. 2 FM ANT VCR COAXIAL DVD OUT SURROUND OPTICAL 1 SUB WOOFER SUB WOOFER MONITOR OUT CENTER V 6CH INPUT VIDEO INPUT OUTPUT Video monitor indicates audio signal direction AUDIO OUTPUT L R AUDIO INPUT L R V VIDEO INPUT V VIDEO OUTPUT L indicates left analog cables R indicates right analog cables O indicates optical cables indicates video signal direction VCR V indicates video cables 10 0104V340R_09-18_EN(U).p65 10 03.3.28, 11:54 AM CONNECTIONS Note Connecting audio components • Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is off, this unit may distort the sound from other components. ■ Connecting a CD player Connect the coaxial digital output jack on your CD player to the DIGITAL INPUT CD jack on this unit. y • Use the AUDIO jacks on this unit to connect to a CD player that does not have a COAXIAL DIGITAL OUTPUT jack, or to record from CD players. ■ Connecting a CD recorder or MD recorder PREPARATION Connect the input jacks on your CD recorder or MD recorder to the MD/CD-R OUT (REC) jacks. Connect the output jacks on your CD recorder or MD recorder to the MD/CD-R IN (PLAY) jacks to play a source from your recording component. L AUDIO OUTPUT R CD recorder or MD recorder AUDIO R L AUDIO INPUT AUDIO L R VIDEO TUNER L CD DVD IN D-TV /CBL R AM ANT (PLAY) GND MD /CD-R COAXIAL OUTPUT CD player OUT DIGITAL INPUT CD (REC) V-AUX MAIN IN 75Ω UNBAL. 2 C FM ANT VCR COAXIAL DVD OUT SURROUND OPTICAL 1 SUB WOOFER SUB WOOFER 6CH INPUT AUDIO OUTPUT MONITOR OUT CENTER OUTPUT L R indicates signal direction L indicates left analog cables R indicates right analog cables C indicates coaxial cables English 11 0104V340R_09-18_EN(U).p65 11 03.3.28, 11:54 AM CONNECTIONS Connecting the antennas Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength. ■ Connecting the AM loop antenna 1 Set up the AM loop antenna, then connect it to the terminals on this unit. 2 Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals. 3 Orient the AM loop antenna for the best reception. Connect each antenna correctly to the designated terminals. AM loop antenna (included) DEO Indoor FM antenna (included) TUNER AM ANT GND 75Ω UNBAL. FM ANT MONITOR OUT Ground (GND terminal) For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth. Notes • The AM loop antenna should be placed away from this unit. • The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit. A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas. FREQUENCY STEP switch (General model only) 50 kHz/ 9kHz 100 kHz/10kHz FM/AM FREQUENCY STEP Because the inter-station frequency spacing differs in different areas, set the FREQUENCY STEP switch (located on the rear panel) according to the frequency spacing in your area. North, Central and South America: 100 kHz/10 kHz Other areas: 50 kHz/9 kHz Before setting this switch, disconnect the AC power plug of this unit from the AC outlet. 12 0104V340R_09-18_EN(U).p65 12 03.3.28, 11:54 AM CONNECTIONS Connecting an external decoder This unit is equipped with 6 additional input jacks (MAIN left and right, CENTER, SURROUND left and right and SUBWOOFER) for discrete multi-channel input from a component equipped with a multi-channel decoder and 6 channel output jacks such as a DVD/SACD player. /CD-R OUT DIGITAL INPUT (REC) V-AUX MAIN IN 75Ω UNBAL. 2 CD FM ANT VCR COAXIAL PREPARATION DVD OUT SURROUND OPTICAL 1 SUB WOOFER SUB WOOFER MONITOR OUT CENTER 6CH INPUT OUTPUT L CENTER L R R SURROUND SUBWOOFER MAIN DVD/SACD player Note • When you select 6CH INPUT as the input source, the unit automatically turns off the digital sound field processor, and you cannot use DSP programs. English 13 0104V340R_09-18_EN(U).p65 13 03.3.28, 11:54 AM CONNECTIONS Connecting the speakers ■ Speakers This unit has been designed to provide the best soundfield quality with a 5-speaker system, using main left and right speakers, rear left and right speakers and a center speaker. If you use different brands of speakers (with different tonal qualities) in your system, the tone of a moving human voice and other types of sound may not shift smoothly. We recommend that you use speakers from the same manufacturer or speakers with the same tonal quality. The main speakers are used for the main source sound plus effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for effect and surround sounds. The center speaker is for the center sounds (dialog, vocals, etc.). The main speakers should be high-performance models and have enough power-handling capacity to accept the maximum output of your audio system. The other speakers do not have to be equal to the main speakers. For precise sound localization, however, it is ideal to use the models of equivalent performance with the main speakers. Use of a subwoofer expands your sound field It is also possible to further expand your system with the addition of a subwoofer. The use of a subwoofer is effective not only for reinforcing bass frequencies from any or all channels, but also for reproducing the LFE (low-frequency effect) channel with high fidelity when playing back Dolby Digital or DTS signals. The YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass reproduction. ■ Speaker placement Refer to the following diagram when you place the speakers. Center speaker Main speaker (R) Rear speaker (R) Subwoofer Main speaker (L) 1.8 m (6 feet) Rear speaker (L) Main speakers Place the main left and right speakers an equal distance from the ideal listening position. The distance between each speaker and each side of the video monitor should also be the same. Center speaker Align the front face of the center speaker with the front face of your video monitor. Place the speaker as close to the monitor as possible (such as directly over or under the monitor) and centrally between the main speakers. Rear speakers Place these speakers behind your listening position, facing slightly inwards, about 1.8 m (6 feet) above the floor. Subwoofer The position of the subwoofer is not so critical, because low bass sounds are not highly directional. However, it is better to place the subwoofer near the main speakers. Turn it slightly toward the center of the room to reduce wall reflections. Note • If you do not use any of effect speakers (rear and/or center), change the settings of “SOUND 1 SPEAKER SET” items at the set menu to direct signals to other terminals you have connected speakers to. CAUTION Use magnetically shielded speakers. If these speakers still create interference with the monitor, place the speakers away from the monitor. 14 0104V340R_09-18_EN(U).p65 14 03.3.28, 11:54 AM CONNECTIONS ■ Connections Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) in accordance with the markers on this unit, the speakers, and the speaker cables. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION • Use speakers with the specified impedance shown on the rear panel of this unit. • Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/ or the speakers. 10 mm (3/8”) 1 2 1 Remove approximately 10 mm (3/8”) of insulation from each of the speaker cables. 2 Twist the exposed wires of the cable together to prevent short circuits. PREPARATION A speaker cord is actually a pair of insulated cables running side by side. One cable is colored or shaped differently, perhaps with a stripe, groove or ridge. Connecting to the MAIN A SPEAKERS terminals Red: positive (+) Black: negative (–) 2 1 3 1 2 Unscrew the knob. 3 Tighten the knob to secure the wire. Insert one bare wire into the hole in the side of each terminal. y (With the exception of U.K., Europe, Korea, and Singapore models) • You can also use banana plug connectors. First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal. Banana plug (With the exception of U.K., Europe, Korea, and Singapore models) Connecting to the MAIN B, CENTER and REAR SPEAKERS terminals Red: positive (+) Black: negative (–) 3 2 1 1 2 Press and open the tab. 3 Release the tab to secure the wire. Insert one bare wire into the hole of each terminal. English 15 0104V340R_09-18_EN(U).p65 15 03.3.28, 11:54 AM CONNECTIONS Main A speaker Right Left 1 AUDIO R 2 AUDIO L R Main B speaker Right Left VIDEO TUNER SPEAKERS L CD CLASS 2 WIRING A DVD R MAIN L AM ANT IN R CD OUT (REC) 75Ω UNBAL. FM ANT IN MAIN VCR CENTER OUT SURROUND REAR (SURROUND) MAIN A OR B : 6Ω MIN./SPEAKER COAXIAL DVD L V-AUX 2 OPTICAL MAIN GND MD /CD-R DIGITAL INPUT B D-TV /CBL (PLAY) R L 1 SUB WOOFER SUB WOOFER MONITOR OUT CENTER 6CH INPUT CENTER : 6Ω MIN./SPEAKER REAR : 6Ω MIN./SPEAKER OUTPUT 3 4 Subwoofer system MAIN SPEAKERS terminals You can connect up to two speaker systems to these terminals. When using only one speaker system, connect it to either of the MAIN A or the MAIN B terminals. 5 Center speaker 6 Right Left Rear speaker 3 1 4 2 REAR SPEAKERS terminals A rear speaker system can be connected to these terminals. 5 6 CENTER SPEAKER terminals A center speaker can be connected to these terminals. The diagram shows the speaker layout in the listening room. SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distributed from the main, center and/or rear channels to this jack in accordance with your SPEAKER SET selections. The LFE (lowfrequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance with your SPEAKER SET selections. Notes • The cut-off frequency of the SUBWOOFER jack is 90 Hz. • If you do not use a subwoofer, allocate the signals to the main left and right speakers by changing the setting of “SOUND 1 SPEAKER SET” item “1D BASS” on the set menu to MAIN. • Use the control on the subwoofer to adjust its volume level. You can also adjust the volume level by using this unit’s remote control (see “SETTING THE SPEAKER LEVELS” on page 46). 16 0104V340R_09-18_EN(U).p65 16 03.3.28, 11:54 AM CONNECTIONS Connecting the power supply cords Turning on the power When all connections are complete, turn on the power of this unit. VOLTAGE SELECTOR 1 VOLUME PRESET/TUNING FM/AM EDIT STANDBY /ON TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM VOLTAGE SELECTOR INPUT MODE SILENT 6CH INPUT SPEAKERS A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE INPUT PREPARATION ON PHONES REAR URROUND) L 110V-120V 220V-240V SYSTEM POWER POWER TV AV N./SPEAKER N./SPEAKER CD (General model) STANDBY POWER MD/CD-R TUNER DVD D-TV/CBL 1 SLEEP VCR V-AUX 6CH INPUT REC AUDIO DISC SKIP CODE SET AMP TV + + + ■ Connecting the AC power cord Plug in this unit to a wall outlet. ■ VOLTAGE SELECTOR (General model only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110V120V/220V-240V AC, 50/60 Hz. 1 Press STANDBY/ON (SYSTEM POWER on the remote control) to turn on the power of this unit. SYSTEM POWER STANDBY /ON or Front panel Remote control The level of the main volume, and then the current DSP program name appear on the front panel display. English 17 0104V340R_09-18_EN(U).p65 17 03.3.28, 11:54 AM BASIC SYSTEM SETTINGS The “BASIC” menu allows you to set some of the basic “SOUND” menu parameters with a minimum of effort. If you wish to configure the unit more precisely to suit your listening environment, use the more detailed parameters from the “SOUND” menu instead of those under the “BASIC” menu (See page 38). Altering any parameters in the BASIC menu will reset all parameters in the “SOUND” menu. 4 Using the basic menu SETUP Changes the speaker and amplifier settings to suit the size of the room you are using. Refer to “Setting the unit to match your speaker system” on page 20 for more information. Use the remote control to make adjustments. • Press SPEAKERS A/B on the front panel to select the main speakers you want to use, and set SPEAKERS ON/OFF to the ON position. • Make sure you disconnect headphones from this unit. AMP + VOL + + CH VOLUME – – MUTE INPUT SP LEVEL Adjusts the output levels of the speakers. Refer to “Setting speaker output levels” on page 20 for more information. 1 TV – MUTE HALL 1 MUSIC 5 /DTS 9 JAZZ ROCK 2 3 TV THTR MOVIE1 ENTERTAINMENT 4 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER LEVEL 2 4,7 SET MENU TITLE MENU A/B/C/D/E – + SELECT 5 6 Press j / i to enter the desired setting mode. 7 Press u / d to exit from the set menu. The front panel display changes in the following order: TEST DISPLAY RETURN Press u / d to change the display to the setting you want to alter. PRESET/CH 3,5 1 Press AMP. 2 Press SET MENU. “BASIC MENU” appears on the front panel display, as shown here. AMP Change the unit settings to suit your listening environment. When you have finished, the unit will automatically return to the basic menu. Exit – + SELECT PRESET/CH SET MENU BASIC MENU MENU A/B/C/D/E If the front panel display changes to show anything other than “BASIC MENU”, press u until it displays “BASIC MENU”. 3 – SELECT + PRESET/CH Press j / i to enter into the BASIC menu. The front panel display changes as shown here: – SELECT Exit 1 SETUP + PRESET/CH 18 0105V340R_19-21_EN(U)a.p65 18 ↑ BASIC ↓↑ SOUND ↓↑ INPUT ↓↑ OPTION ↓ 03.3.28, 11:54 AM BASIC SYSTEM SETTINGS SET MENU BASIC SOUND INPUT OPTION 2 SP LEVEL Press j / i to alter the settings for each parameter. Use d to move to the next setting. Press j / i to adjust the balance between each speaker and the left main speaker. Use d to move to the next setting. 1 ROOM 1 L-R Choose from S/M/L. Adjust the balance between the main left and right speakers. 2 SUBWOOFER 2C Choose either of YES/NONE. Adjust the balance between the main left and center speakers. 3 SPEAKERS 3 RL Choose from 2/3/4/5 spk. Adjust the balance between the main left and rear left speakers. CANCEL 4 SET/CANCEL 4 RR Choose either of SET/CANCEL. SET YES PREPARATION 1 SETUP Adjust the balance between the rear left and rear right speakers. NO 5 CHECK OK: 5 SWFR Choose either of YES/NO. Adjust the balance between the main left speaker and the subwoofer. • After altering the “1 SETUP” parameters, readjust the output levels of the speakers at “2 SP LEVEL”. • See pages 37 – 42 for a detailed explanation of the “SOUND”, “INPUT” and “OPTION” menus. English 19 0105V340R_19-21_EN(U)a.p65 19 03.3.28, 11:54 AM BASIC SYSTEM SETTINGS Setting the unit to match your speaker system Follow the instructions below to set the amplifier output to match the size of your room and speakers. Press u / d to cycle through parameters 1 through 4, and j / i to alter the parameter setting. Factory default settings are highlighted. 1 ROOM Settings: S, M, L Select the size of the room you have installed your speakers in. Roughly speaking, the room sizes are defined as follows: [U.S.A. and Canada models] S: 16ft. x 3ft., 200sq.ft. (4.8 x 4m, 20m2) M: 20ft. x 16ft., 300sq.ft. (6.3 x 5.0m, 30m2) L: 26ft. x 19ft., 450sq.ft. (7.9 x 5.8m, 45m2) 2 SUBWOOFER Settings: YES, NONE Select YES if you have a subwoofer in your system, or NONE if you do not. 3 SPEAKERS Settings: 2, 3, 4, 5 (spk) Select the number of speakers you wish to use in your speaker configuration. This number does not include your subwoofer. Display Speaker 2spk L 3spk L C R Main L/Center/Main R L R RL RR Main L/Main R/Rear L/ Rear R 4spk 5spk Main L/Main R R Main L/Center/Main R/ Rear L/Rear R L C R RL RR 5 Use the test tone to check the speaker levels. When you select SET in 4, the display changes to “CHECK: TestTone”, and the unit outputs a test tone to each of the speakers in turn. When the test tone begins, the display changes to “CHECK OK?--YES”. If the volume of the test tone varies between speakers, press j / i to change the display to “NO”. The unit will automatically enter the “2 SP LEVEL” mode. If the test tone is output at the same volume from all of the speakers, select “CHECK OK: YES”. Press d to exit from the SETUP menu. Notes • The unit cycles the test tone around each of the speakers in turn twice. • The indicator of the speaker currently outputting the test tone flashes on the front panel display. [Other models] S: 3.6m x 2.8m, 10m2 M: 4.8m x 4.0m, 20m2 L: 6.3m x 5.0m, 30m2 Setting 4 SET or CANCEL Select SET to confirm the changes you made to the above three settings. The unit will output a test tone to the speakers (see 5). Alternatively, select CANCEL to exit this menu without altering any of the unit settings. Setting speaker output levels (SP LEVEL) Use this menu to compare and adjust the test tone output from each speaker to the output from the left main (or left rear) speaker so that the volume level for all speakers is identical. Press u / d to select a speaker, then adjust the balance using j / i. Note • The unit outputs the test tone from the selected speaker and the left main (or left rear) speaker in turn. The indicator of the speaker currently outputting the test tone flashes on the front panel display. 1 L-R Adjusts the balance between the main left and right speakers. 2 C Adjusts the balance between the main left and center speakers. 3 RL Adjusts the balance between the main left and rear left speakers. 4 RR Adjusts the balance between the rear left and rear right speakers. 5 SWFR Adjust the balance between the main left speaker and the subwoofer. 20 0105V340R_19-21_EN(U)a.p65 20 03.3.28, 11:54 AM PLAYBACK 1 5 7 VOLUME PRESET/TUNING FM/AM Press INPUT l / h repeatedly (one of the input selector buttons on the remote control) to select the input source. The selected input source name and input mode appear on the front panel display for a few seconds. EDIT STANDBY /ON TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM INPUT MODE SILENT 6CH INPUT SPEAKERS ON A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE INPUT INPUT CD PHONES or 3 4 7 8 5 5 DVD Front panel MD/CD-R TUNER SLEEP D-TV/CBL V-AUX VCR Remote control SYSTEM POWER POWER TV AV CD 5 DVD STANDBY POWER MD/CD-R TUNER SLEEP D-TV/CBL V-AUX VCR 6CH INPUT REC AUDIO DISC SKIP CODE SET 1 VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER CD VOLUME DVD L R Selected input source AMP TV + + + VOL CH VOLUME – – – MUTE INPUT To select the audio source connected to the 6CH INPUT jacks • Select the input to which the video source component is connected before selecting an audio source. Press 6CH INPUT until “6CH INPUT” appears on the front panel display. 7 MUTE HALL 1 MUSIC 5 /DTS 9 1 JAZZ ROCK 2 3 TV THTR MOVIE1 ENTERTAINMENT 4 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER 8 6CH INPUT Press STANDBY/ON (SYSTEM POWER on the remote control) to turn on the power. BASIC OPERATION 5 AUTO 6CH INPUT or SYSTEM POWER STANDBY /ON Front panel Front panel Remote control 2 Turn on the video monitor connected to this unit. 3 Press and set SPEAKERS ON/OFF inward (ON). 4 Remote control or Press and set SPEAKERS A/B inward (A) or outward (B) to select the main speakers you want to use. SPEAKERS ON A OFF B Note • If “6CH INPUT” is shown on the front panel display, no other source can be played. To select another input source, first press 6CH INPUT so that “6CH INPUT” disappears from the front panel display. SPEAKERS ON A OFF B English 21 0106V340R_22-27_EN(U).p65 21 03.3.28, 11:54 AM PLAYBACK 6 Start playback or select a broadcast station on the source component. Refer to the operation instructions for the component. 7 Adjust the volume to the desired level. The volume level is displayed digitally. Example: –70 dB Control range: VOLUME MUTE (minimum) to 0 dB (maximum) The volume level indicator also shows the current volume level as a bar graph. VOLUME ■ BGV (background video) function The BGV function allows you to view images from a video source together with sounds from an audio source. For example, you can enjoy listening to classical music while watching beautiful scenery from a video source on the video monitor. Select a source from the video group, then select a source from the audio group using the input selector buttons on the remote control. CD DVD MD/CD-R TUNER SLEEP D-TV/CBL V-AUX VCR + VOLUME or Front panel ■ To mute the sound – Press MUTE on the remote control. To resume audio output, press MUTE again. Remote control If desired, use CONTROL and BASS/TREBLE –/+. These controls only effect the sound from the main speakers. BASS/TREBLE CONTROL MUTE y • You can change the amount by which the unit reduces the volume in “OPTION 3 AUDIO MUTE” in the set menu. • You can also cancel mute by pressing VOLUME +/–, etc. • During muting, the MUTE indicator flashes on the front panel display. ■ Night listening mode This mode reproduces dialogue clearly while reducing the volume of loud sound effects for easier listening at low volumes or at night. Front panel Notes • If you increase or decrease the high-frequency or the lowfrequency sound to an extreme level, the tonal quality from the center and rear speakers may not match that of the main left and right speakers. • If you have connected a recording component to the VCR OUT, or MD/CD-R OUT jacks, and you notice distortion or low volume during playback from other components, try turning the recording component on. Press NIGHT on the remote control. Press NIGHT once more to return to normal reproduction. NIGHT 0 Note • Setting the unit in standby mode cancels night listening mode. y 8 Select a DSP program if desired. Use PROGRAM l / h (DSP program buttons on the remote control) to select a DSP program. See pages 27 – 30 for details about DSP programs. When using the remote control, press AMP before selecting a DSP program. HALL JAZZ ROCK 1 2 3 ENTERTAINMENT 4 • You can use night listening mode with any of the sound field programs. • The NIGHT indicator on the front panel display lights when the unit is in night listening mode. • Night listening mode may vary in effectiveness depending on the input source and surround sound settings you use. ■ When you have finished using this unit PROGRAM MUSIC or 5 /DTS 9 Front panel TV THTR MOVIE1 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER Press STANDBY/ON (STANDBY on the remote control) to set this unit in standby mode. Remote control STANDBY STANDBY /ON or Front panel 22 0106V340R_22-27_EN(U).p65 22 03.3.28, 11:54 AM Remote control PLAYBACK ■ Notes on digital signals Input modes and indications This unit is equipped with 2 types of input jacks for the CD and DVD sources only. You can select the type of input signals you wish to use. Each time you turn on the unit power, the input mode is set to the “INPUT 2 INPUT MODE” setting defined in the set menu. Press INPUT MODE repeatedly until the desired input mode is shown on the front panel display. INPUT MODE Front panel VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER CD VOLUME AUTO L R Input mode AUTO: In this mode, the input signal is selected automatically as follows: 1) Digital signal 2) Analog signal DTS: In this mode, only digital input signals encoded with DTS are selected, even if the unit is receiving another signal simultaneously. ANALOG: In this mode, only analog input signals are selected, even the unit is receiving digital signals at the same time. Notes ■ Notes on playing DTS-CD/LDs • If the digital output data of the player has been processed in any way, the unit may not be able to perform DTS decoding even if there is a digital connection between this unit and the player. • If you play a source encoded with a DTS signal and set the input mode to ANALOG, the unit may reproduce the noise of an unprocessed DTS signal. In this case, connect the source to a digital input jack on this unit and set the input mode to AUTO or DTS. • If you switch the input mode to ANALOG while playing a source encoded with a DTS signal, the unit does not output any sound. • If you play a source encoded with a DTS signal with the input mode set to AUTO; – The unit automatically switches to the DTSdecoding mode (The “t” indicator lights up) after detecting the DTS signal. When playback of the DTS source is completed, the “t” indicator may flash. While this indicator is flashing, the unit can only reproduce DTS source. If you want to play a normal PCM source immediately, change the input mode back to AUTO. – When the input mode is set to AUTO and a search or skip operation is performed during playback of a DTS source, the “t” indicator may flash. If this state continues for longer than 30 seconds, the unit will automatically switch from “DTS-decoding” mode to PCM digital signal input mode. The “t” indicator will turn off. BASIC OPERATION DVD The digital input jacks of this unit can handle 96 kHz sampling digital signals. Note the following when a digital signal with a sampling frequency greater than 48 kHz is input to this unit: • You cannot use any DSP programs. • The unit will output sound as 2-channel stereo from the main left and right speakers only. Therefore, you cannot adjust the level of the effect speakers while listening to such a source. • When AUTO is selected, this unit automatically determines the type of signal. If it detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate setting. • When playing a disc encoded with Dolby Digital or DTS on some LD or DVD players, there is a delay in sound output for a moment when playback resumes after a search, because the unit must select the digital signal again. • When playing a LD source that has not been digitally recorded, the unit may not output any sound for some LD players. In this case, set the input mode to ANALOG. English 23 0106V340R_22-27_EN(U).p65 23 03.3.28, 11:54 AM PLAYBACK 3 Selecting a sound field program You can enhance your listening experience by selecting a DSP program. For details about each program, see pages 27 – 30. After selecting the desired program, press the same button repeatedly to cycle through sub-programs if available. Example: Pressing MOVIE 2 repeatedly switches the sub-program between “Adventure” and “General”. VOLUME EDIT STANDBY /ON TUNING MODE HALL JAZZ ROCK 1 2 3 MUSIC PRESET/TUNING FM/AM 5 MEMORY TV THTR MOVIE1 ENTERTAINMENT 4 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER AUTO/MAN`L MONO MAN`L/AUTO FM /DTS INPUT MODE SILENT 9 6CH INPUT SPEAKERS ON A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU BASS/TREBLE CONTROL INPUT PHONES VCR V-AUX D-TV/CBL DVD MD/CD-R General AMP + + + VOL CH VOLUME – – MUTE INPUT JAZZ ROCK 2 3 1 TV THTR MOVIE1 5 /DTS 4 2,3 MOVIE2 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER EVE SET MENU 1 Press AMP. 2 Press one of the numeric buttons on the remote control to select the desired program. The name of the selected program appears on the front panel display. AMP HALL JAZZ ROCK 1 2 3 MUSIC 5 /DTS 9 VCR TV THTR MOVIE1 ENTERTAINMENT 4 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER V-AUX D-TV/CBL RR • There are 9 programs with sub-programs available with this unit. However, the selection depends on the input signal format and not all sub-programs can be used with all input signal formats. • You cannot use the digital sound field processor with a source connected to the 6CH INPUT jacks of this unit or when the unit is reproducing a digital source with a sampling frequency greater than 48 kHz. • The acoustics of your listening room affect the DSP program. Minimize the sound reflections in your room to maximize the effect created by the program. • When you select an input source, this unit automatically selects the last DSP program used with that source. • When you set this unit in standby mode, it stores the current source and DSP program in memory and automatically selects them when you turn on the power again. • If the unit receives a Dolby Digital or DTS signal when the input mode is set to AUTO, the DSP program (No. 7–9) automatically switches to the appropriate decoding program. • When the unit is reproducing a monaural source with PRO LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie, no sound is output from the main and rear speakers. Sound can only be heard from the center speaker. (If “1A CENTER” on the set menu is set to NON, the center channel sound is output from the main speakers.) ENTERTAINMENT 6 9 L C R LFE RL Notes – MUTE HALL CD 1 TV MUSIC TUNER VOLUME PROGRAM l / h DVD MD/CD-R TUNER CD VOLUME Adventure L C R LFE RL RR y • You can also select DSP program by pressing PROGRAM l / h on the front panel. • Select a program based on your listening preference. Program names are just for reference. 24 0106V340R_22-27_EN(U).p65 24 03.3.28, 11:54 AM PLAYBACK ■ Selecting PRO LOGIC or PRO LOGIC II You can listen to 2-channel sources decoded into five discrete channels by selecting PRO LOGIC or PRO LOGIC II in program No. 9. The display cycles as follows each time you press q/ DTS: PRO LOGIC→PRO LOGIC Enhanced→PRO LOGIC II Movie→PRO LOGIC II Music→PRO LOGIC→.... y • You can select PRO LOGIC, PRO LOGIC Enhanced, PRO LOGIC II Movie, and PRO LOGIC II Music by pressing PROGRAM l / h on the front panel repeatedly. VOLUME PRESET/TUNING FM/AM EDIT STANDBY /ON TUNING MODE MEMORY ■ Playing Dolby Digital EX or DTS ES material AUTO/MAN`L MONO MAN`L/AUTO FM INPUT MODE SILENT 6CH INPUT SPEAKERS ON A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE INPUT Press 6.1/5.1 to turn on the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder. PHONES 6.1/5.1 +10 PROGRAM l / h AMP 2 TV + + + VOL CH VOLUME – – – MUTE INPUT (Example) VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER CD VOLUME MATRIX MUTE HALL JAZZ ROCK 2 3 1 MUSIC 4 TV THTR MOVIE1 5 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 9 LEVEL ENTER 3 SET MENU 1 Select a 2-channel source and start playback on the source component. 2 Press AMP. 3 Press q/DTS. AMP HALL JAZZ ROCK 1 2 3 MUSIC 4 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER 9 VCR ENTERTAINMENT TV THTR MOVIE1 5 /DTS V-AUX D-TV/CBL RR DVD MD/CD-R PRO LOGIC The display changes AUTO → Matrix6.1 → OFF each time 6.1/5.1 is pressed. AUTO: This mode automatically switches Dolby Digital + Matrix 6.1 and DTS + Matrix 6.1 depending on the signal. Virtual rear center speaker does not work for 5.1 channel sources. Matrix 6.1: This setting produces 6-channel playback of the input source using the Matrix 6.1 decoder. The virtual rear center speaker can be used when playing a 5.1-channel source. OFF: Virtual rear center speaker does not work in this setting. Notes TUNER CD VOLUME PL L C R LFE RL MOVIE2 BASIC OPERATION /DTS Matrix 6.1 ENTERTAINMENT L R • Some 6.1-channel compatible discs do not have a signal (flag) that this unit can automatically detect. Select “Matrix 6.1” to play these kinds of discs with 6.1-channel sound. • 6.1-channel playback is not possible even if you press 6.1/5.1 in the following cases: 1 When effects are turned off. 2 When the source connected to the 6CH INPUT jacks is being played. 3 When the unit is reproducing a Dolby Digital KARAOKE source. 4 When headphones are connected to the PHONES jack. • The input mode resets to AUTO when you turn the unit power off. English 25 0106V340R_22-27_EN(U).p65 25 03.3.28, 11:54 AM PLAYBACK ■ Virtual CINEMA DSP With Virtual CINEMA DSP, you can enjoy all DSP programs without rear speakers. It creates virtual speakers to reproduce a natural sound field. You can listen to virtual CINEMA DSP by setting “1C REAR LR” in the set menu to NON. Sound field processing changes to VIRTUAL CINEMA DSP automatically. Note • This unit is not set in the virtual CINEMA DSP mode even if “1C REAR LR” is set to NON in the following cases: – when the 5ch Stereo, DOLBY DIGITAL, Pro Logic, Pro Logic II, or DTS program is selected; – when the sound effect is turned off; – when 6CH INPUT is selected as the input source; – when a digital signal with a sampling frequency greater than 48 kHz is input to this unit; – when using the test tone; or – when connecting the headphones. ■ SILENT CINEMA DSP You can enjoy a powerful sound field similar to what you could expect from actual speakers through headphones, with SILENT CINEMA DSP. You can listen to SILENT CINEMA DSP by connecting your headphones to the PHONES jack while the digital sound field processor is on. The “SILENT” indicator lights up on the front panel display. (When sound effects are off, the unit reproduces the source in normal stereo.) To listen to sounds with headphones only, press SPEAKERS ON/OFF to turn off the output of all the speakers. Notes • This feature is not available when 6CH INPUT is selected or the unit is receiving a digital signal with a sampling frequency greater than 48 kHz. • The sound from the LFE channel will be mixed and output from the headphones. ■ Normal stereo reproduction Press STEREO to turn off the sound effect for normal stereo reproduction. Press STEREO again to turn the sound effect back on. STEREO STEREO or ENTER Notes • If you turn off the sound effects, no sound is output from the center speaker or rear speakers. • If you turn off the sound effects while the unit is reproducing sound from a Dolby Digital or DTS signal, the dynamic range of the signal is automatically compressed and the unit will mix the sounds of the center and rear speaker channels and output them from the main speakers. • The volume may be greatly reduced when you turn off the sound effects or if you set “SOUND 4 D. RANGE (dynamic range)” on the set menu to MIN. In this case turn on the sound effect. y • During stereo reproduction, you can display information such as the type, format and sampling frequency of the signal input from the components connected to this unit. (While playing a source) 1 2 Press AMP. Press d to display the information about the input signal. – SELECT PRESET/CH (Format): The display shows the signal format. When the unit cannot detect a digital signal it automatically switches to analog input. in: The display shows the number of input signal source channels, as follows: For multi-channel soundtrack such as front 3 channels, rear 2 channels and LFE, the display shows “3/2/ LFE”. fs: The display shows the sampling frequency. When the unit is unable to detect the sampling frequency “Unknown” shows in the front panel display. rate: The display shows the bit rate. When the unit is unable to detect the bit rate “Unknown” shows in the front panel display. flg: The display shows the flag - data encoded in a DTS or Dolby Digital signal that causes this unit to automatically switch to the appropriate decoder for playback. EFFECT Front panel Remote control 26 0106V340R_22-27_EN(U).p65 26 + 03.3.28, 11:54 AM DIGITAL SOUND FIELD PROCESSING (DSP) Understanding sound fields A sound field is defined as the “characteristic sound reflections of a particular space.” In concert halls and other music venues, we hear early reflections and reverberations as well as the direct sound produced by the artist(s). The variations in the early reflections and other reverberations among the different music venues is what gives each venue its special and recognizable sound quality. YAMAHA sent teams of sound engineers all around the world to measure the sound reflections of famous concert halls and music venues, and collect detailed sound field information such as the direction, strength, range, and delay time of those reflections. Then we stored this enormous amount of data in the ROM chips of this unit. ■ Recreating a sound field Hi-Fi DSP programs BASIC OPERATION Recreating the sound field of a concert hall or an opera house requires localizing the virtual sound sources in your listening room. The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data. The processor controls the strength and delay time of the signals output from the four effect speakers to localize the virtual sound sources and fully encompass the listener. The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. No. 1 Features Program CONCERT HALL (except China model) A large round concert hall with a rich surround effect. Pronounced reflections from all directions emphasize the extension of sounds. The sound field has a great deal of presence, and your virtual seat is near the center, close to the stage. HALL IN CHINA (China model only) An large, extremely famous concert hall in China with approx. 650 seats on the first floor and approx. 500 seats on the second floor. The clear sound field of this gorgeous and majestic hall is suited especially for classic music. Your virtual seat is near the center on the first floor. 2 JAZZ CLUB This is the sound field at stage front in “The Bottom Line”, a famous New York jazz club, that seats up to 300 people. Its wide left to right seating arrangement offers a real and vibrant sound. 3 ROCK CONCERT The ideal program for lively, dynamic rock music. The data for this program was recorded at LA’s “hottest” rock club. The listener’s virtual seat is at the center-left of the hall. 4 ENTERTAINMENT/ Disco This program recreates the acoustic environment of a lively disco in the heart of a big city. The sound is dense and highly concentrated. It is also characterized by a high-energy, “immediate” sound. ENTERTAINMENT/ 5ch Stereo Using this program increases the listening position range. This is a sound field suitable for background music at parties, etc. English 27 0107V340R_28-31_EN(U).p65 27 03.3.28, 11:54 AM CINEMA-DSP Sound design of CINEMA-DSP Filmmakers intend for the dialog to be located right on the screen, the effect sound a little farther back, the music spread even farther back, and the surround sound around the listener. Of course, all of these sounds must be synchronized with the images on the screen. CINEMA-DSP is an upgraded version of YAMAHA DSP specially designed for movie soundtracks. CINEMA-DSP integrates the DTS, Dolby Digital, and Dolby Pro Logic surround sound technologies with YAMAHA DSP sound field programs to provide a surround sound field. It recreates comprehensive movie sound design in your audio room. In CINEMA-DSP sound field programs, YAMAHA’s exclusive DSP processing is added to the Main left and right, and Center channels, so the listener can enjoy realistic dialogue, depth of sound, smooth transition between sound sources, and a surround sound field that goes beyond the screen. When a DTS or Dolby Digital signal is detected, the CINEMA-DSP sound field processor automatically chooses the most suitable sound field program for that signal. L SURROUND SOUND FIELD PRESENCE SOUND FIELD DIALOG EFFECT MUSIC R SURROUND SOUND FIELD In addition to the DSP, this unit is equipped with a variety of precise decoders; Dolby Pro Logic decoder for Dolby Surround sources, Dolby Pro Logic II decoder for Dolby Surround and 2-channel sources, Dolby Digital/DTS decoder for multi-channel sources and Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder for adding a rear center channel (the rear center channel is outputted from virtual rear center speaker). You can select CINEMA-DSP programs to optimize these decoders and the DSP sound patterns depending on the input source. CINEMA-DSP Programs The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. Select the DSP program that you feel sounds best regardless of the name and description given for it below. ■ For audio-video sources: No. 4 to 6 No. Features Program 4 ENTERTAINMENT/ Game This program adds a deep and spatial feeling to video game sounds. 5 MUSIC VIDEO This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual jazz or rock concert. 6 TV THEATER/ Mono Movie This program is provided for reproducing monaural video sources (such as old movies). The program produces the optimum reverberation to create sound depth using only the presence sound field. TV THEATER/Variety/ Sports Though the presence sound field is relatively narrow, the surround sound field employs the sound environment of a large concert hall. This effect enhances the experience of watching various TV programs such as news, variety shows, music programs or sports programs. 28 0107V340R_28-31_EN(U).p65 28 03.3.28, 11:54 AM CINEMA-DSP ■ For movie programs No. 7 8 MOVIE THEATER 1 MOVIE THEATER 2 Features Spectacle This program creates the extremely wide sound field of a 70-mm movie theater. It precisely reproduces the source sound in detail, making both the video and the sound field incredibly real. This is ideal for any kind of video source encoded with Dolby Surround, Dolby Digital or DTS (especially large-scale movie productions). Sci-Fi This program clearly reproduces dialog and sound effects in the latest sound form of science fiction films, thus creating a broad and expansive cinematic space amid the silence. You can enjoy science fiction films in a virtual-space sound field that includes Dolby Surround, Dolby Digital and DTS-encoded software employing the most advanced techniques. Adventure This program is ideal for precisely reproducing the sound design of the newest 70-mm and multichannel soundtrack films. The sound field is made to be similar to that of the newest movie theaters, so the reverberations of the sound field itself are restrained as much as possible. General This program is for reproducing sounds from 70-mm and multichannel soundtrack films, and is characterized by a soft and extensive sound field. The presence sound field is relatively narrow. It spatially spreads all around and toward the screen, restraining the echo effect of conversations without losing clarity. Straight Decode The built-in decoder reproduces source sounds and sound-effects precisely. No DSP effect is applied in this program. Enhanced Mode This program ideally simulates the multi-surround speaker systems of the 35-mm film theaters. Dolby Pro Logic decoding, Dolby Digital decoding or DTS decoding and digital sound field processing create precise effects without altering the original sound orientation. The surround effects produced by this sound field wrap around the viewer naturally from the back to the left and right, and toward the screen. BASIC OPERATION 9 Program Straight Decode This unit is equipped with various precise decoders; • Dolby Digital/DTS decoder for multi-channel reproduction of the original sound • Dolby Pro Logic/Pro Logic II decoder for multi-channel reproduction of 2-channel sources Select any of the Straight Decode modes in Program 9 (except for the sub-program “Enhanced”) to use any of these decoders for reproducing the original sound without any sound effects added. In this case, no DSP effect is applied and the DSP indicator turns off. Note • When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, and the main and rear speakers output effect sounds. English 29 0107V340R_28-31_EN(U).p65 29 03.3.28, 11:54 AM CINEMA-DSP Sound field effects The 6-channel soundtracks found on 70-mm film produce precise sound field localization and rich, deep sound without using matrix processing. This unit’s MOVIE THEATER programs provide the same quality of sound and sound localization that 6-channel soundtracks do. The built-in Dolby Digital or DTS decoder brings the professional-quality sound designed for movie theaters into your home. With this unit’s MOVIE THEATER programs, you can use Dolby Digital or DTS technology to recreate a dynamic sound that gives you the feeling of being in a public theater. ■ Dolby Digital/DTS + DSP sound field effect Presence DSP sound field Left surround DSP sound field These programs use YAMAHA’s tri-field DSP processing on each of the Dolby Digital or DTS signals for the front, left surround, and right surround channels. This processing enables this unit to reproduce the immense sound field and surround expression of a Dolby Digitalor DTS-equipped movie theater without sacrificing the clear separation of all channels. Right surround DSP sound field ■ Dolby Digital/DTS + Matrix 6.1 + DSP sound field effect These programs provide you with the maximum experience of the spacious surround effects by adding an extra rear center DSP sound field created from the virtual rear center speaker. ■ Dolby Pro Logic + DSP sound field effect Presence DSP sound field Most movie material has 4-channel (left, center, right, and surround) sound information encoded by Dolby Surround matrix processing and stored on the left and right tracks. These signals are processed by the Dolby Pro Logic decoder. The MOVIE THEATER programs are designed to recreate the spaciousness and delicate nuances of sound that tend to be lost in the encoding and decoding processes. Surround DSP sound field ■ Dolby Pro Logic II Dolby Pro Logic II decodes Dolby Surround software into 5 discrete full-range channels (3 channels in front and 2 channels in rear). There are 2 modes; MOVIE for movies and MUSIC for 2-channel audio sources. 30 0107V340R_28-31_EN(U).p65 30 03.3.28, 11:54 AM TUNING There are 2 methods of tuning; automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. 4 ■ Automatic tuning Press PRESET/TUNING l / h once to begin automatic tuning. Press h to tune in to a higher frequency, or press l to tune in to a lower frequency. PRESET/TUNING 3 3 2 SET MENU VOLUME PRESET/TUNING FM/AM EDIT STANDBY /ON TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM INPUT MODE SILENT 6CH INPUT SPEAKERS ON A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU BASS/TREBLE CONTROL INPUT VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER PHONES TUNED A Press INPUT l / h (TUNER on the remote control) to select TUNER as the input source. BASIC OPERATION 1 AM 1530 kHz When the unit is tuned in to a station, the “TUNED” indicator lights up and the frequency of the station received is shown on the front panel display. 1 4 AUTO ■ Manual tuning If the signal from the station you are trying to select is weak, you must tune in to it manually. INPUT CD or DVD Front panel 2 MD/CD-R TUNER SLEEP D-TV/CBL V-AUX VCR Remote control 1 Select TUNER and the reception band following steps 1 and 2 described in “Automatic tuning” at left. 2 Press TUNING MODE (AUTO/MAN’L MONO) until the “AUTO” indicator disappears from the front panel display. Press FM/AM to select the reception band. “FM” or “AM” appears on the front panel display. TUNING MODE FM/AM AUTO AUTO/MANUAL MONO or 3 Disappears If the colon (:) appears on the front panel display, press PRESET/TUNING (EDIT) to turn it off. Press TUNING MODE (AUTO/MAN’L MONO) so that the “AUTO” indicator lights up on the front panel display. VCR PRESET/TUNING TUNING MODE D-TV/CBL DVD MD/CD-R AUTO/MANUAL MONO Lights up If the colon (:) appears on the front panel display, press PRESET/TUNING (EDIT) to turn it off. VCR PRESET/TUNING V-AUX D-TV/CBL DVD MD/CD-R 3 TUNER TUNED A TUNER TUNED EDIT EDIT V-AUX AUTO AUTO AM 1440 kHz A AM 1440 kHz Press PRESET/TUNING l / h to tune in to the desired station manually. Hold down the button to continue searching. PRESET/TUNING SET MENU Note • Manually tuning in to an FM station will automatically change the reception mode to monaural to increase the signal quality. English 31 0108V340R_32-39_EN(U).P65 31 03.3.28, 11:54 AM TUNING Notes Presetting stations ■ Automatically presetting stations (for FM stations) You can use the automatic preset tuning feature to store FM stations. This function enables the unit to automatically tune in to FM stations with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order. You can then recall any preset station easily by selecting the preset number. 2 13 VOLUME PRESET/TUNING FM/AM EDIT STANDBY /ON TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM INPUT MODE SILENT 6CH INPUT SPEAKERS ON A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE INPUT PHONES 1 Press FM/AM to select the FM band. FM/AM 2 Press TUNING MODE (AUTO/MAN’L MONO) until the “AUTO” indicator lights up on the front panel display. TUNING MODE AUTO Automatic preset tuning options You can select the preset number from which this unit will store FM stations and/or begin tuning toward lower frequencies. After pressing MEMORY in step 3: 1. Press A/B/C/D/E and PRESET/TUNING l / h to select the preset number under which the first station will be stored. Automatic preset tuning will stop when stations have all been stored up to E8. 2. Press PRESET/TUNING (EDIT) to turn off the colon (:) and then press PRESET/TUNING l to begin tuning toward lower frequencies. Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is set in standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the preset stations may be cleared. If so, store the stations again. Lights up AUTO/MANUAL MONO 3 • Any stored station data existing under a preset number is cleared when you store a new station under that preset number. • If the number of the received stations does not reach E8, automatic preset tuning has automatically stopped after searching all stations. • Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune in to it manually in the monaural mode, and store it by following the procedure described in “Manually presetting stations” on page 33. Press and hold MEMORY (MAN’L/AUTO FM) for at least 3 seconds. The preset number and the “MEMORY” and “AUTO” indicators flash. After about 5 seconds, automatic preset tuning starts, beginning at the frequency currently displayed and moving toward the higher frequencies. MEMORY MAN`L/AUTO FM VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER AUTO MEMORY A1:FM 89.9 MHz When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station. 32 0108V340R_32-39_EN(U).P65 32 03.3.28, 11:54 AM TUNING ■ Manually presetting stations You can store up to 40 stations (8 stations x 5 groups) manually. 4 2,5 Press PRESET/TUNING l / h to select a preset station number (1 to 8) while the “MEMORY” indicator is flashing. Press h to select a higher preset station number. Press l to select a lower preset station number. PRESET/TUNING VOLUME SET MENU PRESET/TUNING FM/AM EDIT STANDBY /ON TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM INPUT MODE SILENT 6CH INPUT SPEAKERS ON A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE INPUT PHONES VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER TUNED MEMORY C3:AM 1440 kHz 3 4 Preset number 1 Tune in to a station. See page 31 for tuning instructions. VCR V-AUX D-TV/CBL DVD MD/CD-R 5 TUNER TUNED AM 1440 kHz When tuned to a station, the front panel display shows the frequency of the station received. 2 MEMORY MAN`L/AUTO FM BASIC OPERATION A Press MEMORY (MAN’L/AUTO FM) on the front panel while the “MEMORY” indicator is flashing. The station band and frequency appear on the front panel display with the preset group and number you have selected. Press MEMORY (MAN’L/AUTO FM). The “MEMORY” indicator flashes for about 5 seconds. MEMORY VCR MEMORY MAN`L/AUTO FM D-TV/CBL DVD MD/CD-R TUNER TUNED C3:AM 1440 kHz Flashes 3 V-AUX Press A/B/C/D/E repeatedly to select a preset station group (A to E) while the “MEMORY” indicator is flashing. The group letter appears. Check that the colon (:) is showing on the front panel display. A/B/C/D/E NEXT VCR V-AUX D-TV/CBL DVD MD/CD-R Shows the displayed station has been stored as C3. 6 Repeat steps 1 to 5 to store other stations. Notes • Any stored station data existing under a preset number is cleared when you store a new station under that preset number. • The reception mode (stereo or monaural) is stored along with the station frequency. TUNER TUNED MEMORY C :AM 1440 kHz Preset group English 33 0108V340R_32-39_EN(U).P65 33 03.3.28, 11:54 AM TUNING ■ Exchanging preset stations Selecting a preset station You can recall any desired station simply by selecting the preset station number under which it was stored. You can exchange the assignment of two preset stations. The example below describes the procedure for exchanging preset station “E1” with “A5”. 2,4 VOLUME PRESET/TUNING FM/AM VOLUME EDIT STANDBY /ON TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM PRESET/TUNING FM/AM EDIT STANDBY /ON TUNING MODE INPUT MODE MEMORY 6CH INPUT AUTO/MAN`L MONO MAN`L/AUTO FM SILENT SPEAKERS ON A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU BASS/TREBLE CONTROL INPUT INPUT MODE 6CH INPUT PHONES SILENT SPEAKERS ON A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE INPUT PHONES 1 2 1,3 1,3 MUTE INPUT HALL JAZZ ROCK 2 3 MUTE 1 MUSIC 5 /DTS 9 TV THTR MOVIE1 ENTERTAINMENT 4 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER LEVEL SET MENU TITLE 1 2 MENU A/B/C/D/E – + SELECT TEST DISPLAY RETURN PRESET/CH 1 1 Select preset station “E1” by using the A/B/C/D/E and PRESET/TUNING l / h. See “Selecting a preset station” at left. 2 Press and hold PRESET/TUNING (EDIT) for at least 3 seconds. “E1” and the “MEMORY” indicator flash on the front panel display. Press A/B/C/D/E (A/B/C/D/E on the remote control) to select the preset station group. The preset group letter appears on the front panel display and changes each time you press A/B/C/D/E. VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER PRESET/TUNING TUNED MEMORY A/B/C/D/E SET MENU or MENU NEXT A/B/C/D/E 3 Front panel 2 E1:FM 87.5 MHz EDIT Remote control Press PRESET/TUNING l / h (PRESET u / d on the remote control) to select a preset station number (1 to 8). The preset group and number appear on the front panel display along with the station band and frequency, and the “TUNED” indicator lights up. VCR – SELECT or + V-AUX D-TV/CBL DVD MD/CD-R TUNER TUNED MEMORY A5:FM 90.6 MHz 4 PRESET/TUNING Select preset station “A5” by using the A/B/C/D/E and PRESET/TUNING l / h. “A5” and the “MEMORY” indicator flash on the front panel display. Press PRESET/TUNING (EDIT) again. The stations stored at the two preset assignments are exchanged. SET MENU VCR PRESET/CH V-AUX D-TV/CBL DVD MD/CD-R TUNER PRESET/TUNING MEMORY Front panel Remote control EDIT EDIT E1-A5 Shows the exchange of stations has been completed. VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER TUNED C3:AM 1440 kHz 34 0108V340R_32-39_EN(U).P65 34 03.3.28, 11:54 AM SLEEP TIMER Use this feature to automatically set this unit in standby mode after the amount of time you have set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. ■ Canceling the sleep timer Press SLEEP repeatedly until “SLEEP OFF” appears on the front panel display. After a few seconds, “SLEEP OFF” disappears, the “SLEEP” indicator goes off and the display returns to the previous indication. The sleep timer can only be set with the remote control. y • By connecting a commercially available timer to this unit, you can also set a wake-up timer. Refer to the operation instructions of the timer. SLEEP ■ Setting the sleep timer y • The sleep timer setting can also be canceled by setting this unit in standby mode by using STANDBY on the remote control (or STANDBY/ON on the front panel) or by disconnecting the AC power cord from the AC outlet. SYSTEM POWER POWER TV STANDBY POWER AV CD MD/CD-R TUNER DVD D-TV/CBL SLEEP VCR V-AUX 2 6CH INPUT REC AUDIO DISC SKIP CODE SET BASIC OPERATION AMP TV + + + 1 Select a source and start playback on the source component. 2 Press SLEEP repeatedly to set the amount of time. Each time you press SLEEP, the front panel display changes as shown below. VCR V-AUX D-TV/CBL DVD SLEEP MD/CD-R TUNER SLEEP 3 CD SLEEP HiFi DSP 120min VOLUME L R The “SLEEP” indicator lights up on the front panel display soon after the sleep timer has been set. The display then returns to the previous indication. VCR V-AUX D-TV/CBL DVD MD/CD-R TUNER CD SLEEP HiFi DSP ROCK CONCERT VOLUME L R English 35 0108V340R_32-39_EN(U).P65 35 03.3.28, 11:54 AM RECORDING Recording adjustments and other operations are performed on other recording components. Refer to the operation instructions for these components for details on their operation . VOLUME PRESET/TUNING FM/AM EDIT STANDBY /ON TUNING MODE MEMORY AUTO/MAN`L MONO MAN`L/AUTO FM INPUT MODE SILENT 6CH INPUT SPEAKERS ON A STEREO OFF B EFFECT PROGRAM A/B/C/D/E PRESET/TUNING NEXT SET MENU CONTROL BASS/TREBLE INPUT PHONES 2 SYSTEM POWER POWER TV AV CD 2 STANDBY POWER MD/CD-R TUNER DVD D-TV/CBL SLEEP VCR V-AUX If you playback a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals. AUDIO DISC SKIP CODE SET AMP TV 1 2 • Do a test recording before you start an actual recording. • When this unit is set in standby mode, you cannot record between the components connected to it. • DSP programs and volume, bass, and treble settings do not affect the recorded material. • You cannot record from a source connected to the 6CH INPUT jacks on this unit. • Input sources are not output to the same OUT (REC) channel. (For example, the signal input from VCR IN is not output to VCR OUT.) • You cannot record audio signals from a source connected to the DIGITAL INPUT jack on this unit because the signals from the DIGITAL INPUT jack and analog input jacks are independent. Please connect a source to the analog in jacks if you wish to record from the analog out jacks. • Check the copyright laws in your country if you wish to record from records, CDs, radio, etc. Recording of copyrighted material may infringe copyright laws. 6CH INPUT REC + Notes + + ■ Special considerations when recording DTS material Turn on the power of this unit and all connected components. Select the source component you want to record from. CD INPUT or Front panel DVD MD/CD-R TUNER SLEEP D-TV/CBL V-AUX VCR The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise being recorded. Therefore, if you want to use this unit to record sources that have DTS signals recorded on them, the following considerations and adjustments need to be made. For LDs, DVDs and CDs encoded with DTS, follow the operating instructions of your player to set it to output an analog signal, if it is compatible with the DTS format. Remote control 3 Start playback (or select a broadcast station) on the source component. 4 Start recording on the recording component. 36 0108V340R_32-39_EN(U).P65 36 03.3.28, 11:54 AM SET MENU You can set the following parameters on the set menu to obtain a better sound from the unit. Change the settings to reflect the needs of your listening environment. Set menu list Adjusting the items on the set menu Use the remote control to make adjustments. The set menus are divided by use and function into the 4 categories listed here. AMP 1 TV ■ BASIC + + + VOL CH VOLUME – – MUTE INPUT – MUTE The BASIC area contains the basic parameters that you must set before using this unit. It consists of the following menus. See pages 18 – 20 for a detailed explanation. HALL 1 MUSIC 5 /DTS 9 JAZZ ROCK 2 3 ENTERTAINMENT 4 TV THTR MOVIE1 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER LEVEL SET MENU TITLE 1 SETUP 8 2 3,5,8 MOVIE2 6 MENU A/B/C/D/E – + SELECT TEST 2 SP LEVEL (Speaker level) DISPLAY RETURN PRESET/CH 4,6,7 ■ SOUND The SOUND area contains parameters for altering sound output. It consists of the following menus that you can use to alter the quality and tone of the sound output by the system. 1 SPEAKER SET 2 SP DISTANCE (Speaker distance) 3 LFE LEVEL (Low frequency effect level) 4 D. RANGE (Dynamic range) • You can change set menu parameters while the unit is reproducing sound. • You can use NEXT and SET MENU +/– on the front panel to change these settings, if the unit is not set to TUNER mode. Press NEXT to select the category or field you wish to change, and SET MENU +/– to change the parameters. Note • You cannot change some set menu parameters while the unit is in night listening mode. 6 HP TONE CTRL (Headphone tone control) 1 Press AMP. AMP 2 Press SET MENU to enter the set menu. SET MENU ■ INPUT The INPUT area contains parameters concerned with signal input. It consists of the following menus that you can use to change the assignment of input jacks. 1 I/O ASSIGN ADVANCED OPERATION 5 CENTER GEQ (Center graphic equalizer) y MENU A/B/C/D/E 2 INPUT MODE ■ OPTION This is a supplementary set up menu provided for your convenience. It consists of the following menus that you can use to change display brightness, protect existing settings, and perform other non-essential functions. 1 DISPLAY SET 3 Press u / d repeatedly to select the desired menu. 4 5 Press j / i to enter the selected menu. Press u / d repeatedly to select the item you want to adjust. 2 MEM. GUARD 3 AUDIO MUTE – • In the descriptions for each item from the following page, the default setting is indicated in bold. SELECT + PRESET/CH y 37 0109V340R_40-45_EN(U).p65 37 03.3.28, 11:54 AM English • By pressing SET MENU repeatedly, you can select items in the same order as when pressing d. SET MENU 6 Press j / i once to enter the setup mode of the selected item. The last setting you adjusted appears on the front panel display. – + SELECT PRESET/CH Use this feature to select suitable output modes for your speaker configuration. Depending on the menu item, press u/d to select a sub item. Note – + SELECT PRESET/CH 7 – + SELECT Press u / d repeatedly until the menu disappears or just press one of the DSP program group buttons to exit from the set menu. – SELECT + HALL JAZZ ROCK 1 2 3 MUSIC or 5 /DTS 9 PRESET/CH • Some menu item settings have no effect when the unit is reproducing a source with a digital signal sampling frequency greater than 48 kHz. ■ 1A CENTER (center speaker mode) Press j / i repeatedly to change the menu item setting. PRESET/CH 8 SOUND 1 SPEAKER SET (speaker mode settings) TV THTR MOVIE1 ENTERTAINMENT 4 If you add a center speaker to your speaker configuration, this unit can provide better dialog localization for several listeners and superior synchronization of sound and images. Choices: LRG (large), SML (small), NON (none) LRG Select this if you have a large center speaker. The unit directs the entire range of the center channel signal to the center speaker. MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is in standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If this happens, adjust the items again. SML Select this if you have a small center speaker. The unit directs the low-frequency signals (90 Hz and below) of the center channel to the speakers selected with “1D BASS”. NON Select this if you do not have a center speaker. The unit directs all of the center channel signal to the main left and right speakers. The BASIC and SOUND menus The “BASIC” menu allows you to easily set the “SOUND 1 SPEAKER SET” and “SOUND 2 SP DISTANCE” parameters. It is not necessary to reset any of the parameters in the “BASIC” menu, but you can access more detailed parameters in the “SOUND” menu if you wish. Note • After altering parameters in the “SOUND” menu, if you select “BASIC 1 SETUP” and then select “SET”, the parameters from the “SOUND” menu alter in response to any changes you make in “BASIC 1 SETUP”. Do not enter the “BASIC 1 SETUP” menu unless you wish to change these settings. If you accidentally enter the “BASIC 1 SETUP” menu, select CANCEL to return to the “BASIC” menu. (page 19) 38 0109V340R_40-45_EN(U).p65 38 03.3.28, 11:54 AM SET MENU ■ 1B MAIN (main speaker mode) Choices: LARGE, SMALL LARGE Select this if you have large main speakers. The unit directs the entire range of the main left and right channel signals to the main left and right speakers. ■ 1D BASS (bass out mode) LFE signals carry low-frequency effects when this unit decodes a Dolby Digital or DTS signal. Low-frequency signals are defined as 90 Hz and below. The Lowfrequency signals can be directed to both main left and right speakers, and to the subwoofer (subwoofer can be used for both stereo reproduction and the DSP program). SMALL Select this if you have small main speakers. The unit directs the low-frequency signals (90 Hz and below) of the main channel to the speakers selected with “1D BASS”. Choices: SWFR (subwoofer), MAIN, BOTH ■ 1C REAR LR (rear speaker mode) MAIN Select this if you do not use a subwoofer. The unit directs LFE signals to the main speakers. Choices: LRG (large), SML (small), NON (none) LRG Select this if you have large rear left and right speakers or if a rear subwoofer is connected to the rear speakers. The entire range of the rear channel signal is directed to the rear left and right speakers. SML Select this if you have small rear left and right speakers. The low-frequency signals (90 Hz and below) of the rear channel are directed to the speakers selected with “1D BASS”. SWFR Select this if you use a subwoofer. The unit directs the LFE signals to the subwoofer. BOTH The unit directs LFE signals to the subwoofer. Lowfrequency signals designated to the main channels in accordance with other speaker mode settings are directed to both main speakers and the subwoofer. Note • When you select MAIN for “1D BASS”, the unit directs the low-frequency signals (90 Hz and below) of the main channel to the main speakers even if you select SMALL for the main speaker mode. NON Select this if you do not have rear speakers. ADVANCED OPERATION y • This unit is set in the virtual CINEMA DSP mode when you select NON for “1C REAR LR”. English 39 0109V340R_40-45_EN(U).p65 39 03.3.28, 11:54 AM SET MENU SOUND 2 SP DISTANCE (speaker distance) Use this feature to adjust the delay applied to center channel sounds. This feature works when there is sound output from the center speakers with a source such as Dolby Digital or DTS. Ideally, the center speaker should be the same distance from the main listening position as the left and right main speakers. However, in most home situations, the center speaker is placed in line with the main speakers. By delaying the sound from the center speaker, you can adjust the apparent distance from the center speaker to the main listening position to make it seem the same as the distance between the listening position and main left and right speakers. 1 2 Press u / d to select “UNIT”. 3 Press u / d to select the speaker for which you want to adjust the delay. 4 Press j / i to set the delay. Press i for higher values and j for lower values. Press j / i to select the unit “meters” or “feet” to be used in setting. Center speaker image SOUND 3 LFE LEVEL Use this feature to adjust the output level of the LFE (low-frequency effect) channel when playing back a Dolby Digital or DTS signal. The LFE signal carries lowfrequency special effect sound which is only added to certain scenes. Control range: SPEAKER ............ –20 to 0 dB HEADPHONE ..... –20 to 0 dB Initial setting: 0 dB 1 Press u / d to select the item to be adjusted. 2 Press j to adjust the LFE level. Note • Adjust the LFE level according to the capacity of your subwoofer or headphones. SOUND 4 D. RANGE (dynamic range) Use this feature to adjust the dynamic range. This setting is effective only when the unit is decoding Dolby Digital signals. Choices: MAX, STD (standard), MIN (minimum) C L C R MAX Select MAX for feature films. STD Select STD for general use. RR RL MIN Select MIN for listening to sources at low volume levels. ■ Setting by “meters” Control range: Initial settings: 0.3 to 24.00 m (for main L/R, center, rear L/R) 3.00 m (for main L/R, center, rear L/R) ■ Setting by “feet” Control range: Initial settings: 1 to 80 ft (for main L/R, center, rear L/R) 10.0 ft (for main L/R, center, rear L/R) Note • No delay will be set if you set the same distance for the main L/R, center and rear L/R. 40 0109V340R_40-45_EN(U).p65 40 03.3.28, 11:54 AM SET MENU SOUND 5 CENTER GEQ (center graphic equalizer) Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right main speakers. You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies. Control range (dB): –6 to +6 Initial setting: 0 dB for 5-band 1 Press d to select a higher frequency and u to select a lower frequency. INPUT 1 I/O ASSIGN (input/ output assignment) You can assign jacks according to the component to be used if this unit’s DIGITAL INPUT jack settings (component names for jacks) differ from those of the component. This lets you to change the jack assignment and effectively connect more components. Once assigned, select that component with INPUT l / h (or the input selector buttons on the remote control). ■ 1A for OPTICAL INPUT jack Choices: 2 Press j / i to adjust the level of that frequency. Note ■ 1B for COAXIAL INPUT jack Choices: • You can monitor the center speaker sound while adjusting this parameter by using the test tone. Press TEST before starting the foregoing procedure. Once you begin this procedure, the test tone remains at the center speaker and you can hear how the sound changes as you adjust the various frequency levels. To stop the test tone, press TEST. SOUND 6 HP TONE CTRL (headphone tone control) Control range (dB): BASS .................... –6 to +3 TRBL (treble) ....... –6 to +3 Initial setting: BASS .................... 0 dB TRBL .................... 0 dB (2) CD, VCR, V-AUX, D-TV/CBL, DVD, MD/CD-R Note • When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack. INPUT 2 INPUT MODE (initial input mode) Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn this unit on (see page 23 for details about the input mode). Choices: AUTO, LAST ADVANCED OPERATION Use this feature to adjust the level of the bass and treble when you are using headphones. (1) DVD, MD/CD-R, CD, VCR, V-AUX, D-TV/CBL AUTO Select this setting to allow the unit to automatically detect the type of input signal and select the appropriate input mode. LAST Select this setting to set this unit to automatically select the last input mode used for the respective sources. English 41 0109V340R_40-45_EN(U).p65 41 03.3.28, 11:54 AM SET MENU OPTION 1 DISPLAY SET ■ DIMMER Use this to adjust the brightness of the front panel display. Control range: –4 to 0 OPTION 2 MEM. GUARD (memory guard) Use this feature to prevent accidental changes to settings on the unit. Choices: ON, OFF Select ON to protect the following features: • All set menu items • Main, center, rear speakers, and subwoofer levels • DSP program parameters Notes • When this item is set to ON, you cannot use the test tone. • When this item is set to ON, you cannot select any other set menu items. OPTION 3 AUDIO MUTE Adjusts the amount by which the MUTE function reduces the output volume. Choices: MUTE, –50dB, –20dB MUTE Completely halts all output of sound. –50dB Reduces the volume of the present sound output by 50dB. –20dB Reduces the volume of the present sound output by 20dB. 42 0109V340R_40-45_EN(U).p65 42 03.3.28, 11:54 AM REMOTE CONTROL FEATURES In addition to controlling this unit, the remote control can operate other A/V components made by YAMAHA and other manufacturers. To control other components, you must set up the remote control with the manufacturer codes. Control area ■ Controlling this unit The shaded areas below can be used to control this unit when the AMP mode is selected. Press AMP to select the AMP mode. SYSTEM POWER POWER TV AV CD Input selector buttons DVD STANDBY POWER MD/CD-R TUNER SLEEP D-TV/CBL V-AUX VCR 6CH INPUT REC AUDIO DISC SKIP CODE SET The buttons in the dotted lines (SYSTEM POWER, STANDBY, SLEEP, 6CH INPUT, VOLUME +/– and MUTE) function in any mode. ■ Controlling other component The shaded areas below can be used to control other components. Each button has a different function depending on the selected components. Select the component to be controlled by pressing an input selector button. SYSTEM POWER POWER TV AV CD Input selector buttons switch the control area for each component. DVD STANDBY POWER MD/CD-R TUNER SLEEP D-TV/CBL V-AUX VCR AMP + + + VOL CH VOLUME – – MUTE INPUT 6CH INPUT Press AMP to control this unit. TV REC AUDIO DISC SKIP – MUTE JAZZ ROCK ENTERTAINMENT 1 2 3 4 MUSIC 5 /DTS 9 TV THTR MOVIE1 6 7 NIGHT 6.1/5.1 0 +10 + VOL MOVIE2 – 8 MUTE STEREO VOLUME + – CH – MUTE INPUT ENTER HALL LEVEL SET MENU TITLE MENU 1 MUSIC 5 + SELECT /DTS TEST 9 JAZZ ROCK 2 3 ENTERTAINMENT TV THTR MOVIE1 4 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER DISPLAY RETURN PRESET/CH LEVEL SET MENU TITLE MENU A/B/C/D/E – SELECT + TEST DISPLAY RETURN ADVANCED OPERATION A/B/C/D/E – + TV HALL PRESET/CH Component control area You can control up to 7 different components. You can set up manufacturer code. English 43 0110V340R_46-49_EN(U).p65 43 03.3.28, 11:54 AM REMOTE CONTROL FEATURES Setting the manufacturer code You can control other components with the remote control by setting the appropriate manufacturer code. The following table shows factory-set component controls (Library: component category) and the manufacturer code for each. Component control (buttons) Component category (Library) Manufacturer Code 199 CD CD player YAMAHA MD/CD-R CD recorder YAMAHA 499 TUNER*1 Tuner YAMAHA Fixed DVD DVD player YAMAHA 699 D-TV/CBL*2 – – – V-AUX – – – VCR – – – 1 * You can control this unit and other Yamaha tuners only. *2 You can only set TV manufacturer codes for the D-TV/CBL buttons. 1 Press and hold CODE SET. With CODE SET depressed, press an input selector button to select the component you want to set up. CD MD/CD-R TUNER DVD D-TV/CBL SLEEP VCR V-AUX 6CH INPUT REC AUDIO DISC SKIP CODE SET AMP TV Note • You must press and hold CODE SET throughout this procedure. 2 With CODE SET depressed, use the numeric buttons to enter the 3 digit code of your component’s manufacturer. • Refer to the LIST OF MANUFACTURER’S CODES at the end of this manual. • To reset the code, enter the factory-set code for each component shown in the above table. 6CH INPUT REC AUDIO DISC SKIP CODE SET AMP TV + VOL + + CH VOLUME – – MUTE INPUT – MUTE HALL 1 MUSIC 5 /DTS 9 JAZZ ROCK 2 3 TV THTR MOVIE1 ENTERTAINMENT 4 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER LEVEL SET MENU TITLE MENU Notes • If the manufacturer of your component has more than one code, try each of them until you find the correct one. • You can only assign one manufacturer code to each input selector button. 44 0110V340R_46-49_EN(U).p65 44 03.3.28, 11:54 AM REMOTE CONTROL FEATURES Controlling other components You can operate other components if you have set the manufacturer code for your component in the remote control. Note, however, that some buttons may not operate the component correctly. Once you select an input source, the remote control switches to the mode for operating the component. 1 SYSTEM 2 POWER POWER TV AV CD DVD STANDBY POWER MD/CD-R TUNER SLEEP D-TV/CBL V-AUX VCR 6CH INPUT REC MUTE HALL JAZZ ROCK 1 2 3 3 9 0 q LEVEL SET MENU TITLE MENU 4 5 /DTS 6 7 DVD player *1 VOLUME – – INPUT HALL JAZZ ROCK ENTERTAINMENT 1 2 3 4 VOL CD player NIGHT 6.1/5.1 STEREO 0 +10 A/B/C/D/E – PRESET/CH *1 TV power Play VCR search backward Search backward Search backward Search forward Search forward Search forward Search forward *3 VCR search forward Power *2 TV power Play *3 *1 Power Disc skip Search backward Tuner *2 VCR rec Search backward r DISPLAY RETURN VCR play Play + SELECT TEST Power *3 Play w e ENTER CD/MD recorder *2 TV power *3 8 9 *1 VCR power Rec 7 MUTE *2 TV power Disc skip CH – MUTE *3 Power *2 TV power + TV, digital/cable TV *1 Power *2 + 6 TV power Rec (MD) Audio Pause Pause *3 VCR pause Skip backward Pause Pause Skip backward Skip backward Skip forward Skip forward Skip forward Stop *2 TV channel up *2 TV channel down *2 *2 TV volume up TV volume down *2 Stop *2 TV channel up *2 TV channel down *2 TV volume up *2 TV volume down TV mute *2 TV input *2 *2 Numeric buttons *3 VCR stop TV channel up TV channel down TV volume up TV volume down Stop ADVANCED OPERATION 1 AV POWER 2 TV POWER 3 REC/DISC SKIP w e r AUDIO d t y a 4 TV CH + TV CH – 5 TV VOL + TV VOL – 6 TV MUTE 7 TV INPUT 8 1-9, 0, +10 9 TITLE 0 PRESET/CH u PRESET/CH d PRESET/CH j PRESET/CH i SELECT q RETURN w ENTER e MENU r DISPLAY VCR TV + MOVIE2 TV THTR MOVIE1 5 CODE SET AMP 4 8 AUDIO DISC SKIP ENTERTAINMENT MUSIC Stop *2 TV channel up *2 TV channel down *2 TV volume up *2 TV volume down *2 TV channel up *2 TV channel down *2 TV volume up *2 TV volume down *2 TV channel up *2 TV channel down *2 *2 TV volume up TV volume down TV mute *2 TV mute *2 TV mute *2 TV input TV input *2 TV input *2 TV input *2 Numeric buttons Numeric buttons TV mute Numeric buttons Numeric buttons TV mute TV input Preset stations (1-8) Title Up VCR channel up Preset up Down VCR channel down Preset down Left Right Select Return Title/Index Enter Enter Index Index Menu Menu Display Display A/B/C/D/E Display English *1 This button functions only when the original remote control of the component has a POWER button. *2 These buttons can operate your TV without switching the input if the manufacturer code is set in D-TV/CBL. *3 These buttons can operate your VCR without switching the input to VCR if the manufacturer code is set in VCR. 45 0110V340R_46-49_EN(U).p65 45 03.3.28, 11:54 AM SETTING THE SPEAKER LEVELS Adjusting the volume during playback You can adjust the volume of the speakers while listening to sound playback. Using the test tone Use the test tone to set speaker levels so that the volume from each speaker is identical when heard from your listening position. AMP AMP TV TV 1 + + + VOL CH VOLUME + + + – – VOL CH VOLUME MUTE INPUT – – – MUTE INPUT HALL JAZZ ROCK ENTERTAINMENT MUSIC 1 2 3 4 5 5 HALL /DTS 9 2 TV THTR MOVIE1 1 /DTS MOVIE2 6 7 8 9 NIGHT 6.1/5.1 STEREO LEVEL 0 +10 ENTER TITLE LEVEL SET MENU TITLE MENU SELECT – 2,5 + TEST PRESET/CH 3 ENTERTAINMENT 4 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER SET MENU MENU SELECT + Press AMP. Press LEVEL repeatedly to select the speaker you want to adjust. The unit cycles through the speakers in the following order each time you press LEVEL: MAIN L→CENTER→MAIN R→ R SUR. (rear R)→L SUR. (rear L)→ SWFR (subwoofer)→..... DISPLAY PRESET/CH Press AMP. 3 Press u / d repeatedly to select a speaker to adjust. Each time you press d, the unit will cycle through the speakers in the following order: TEST LEFT (main L)→TEST CENTER (center)→ TEST RIGHT (main R)→TEST R SUR. (rear R)→ TEST L SUR. (rear L)→TEST SUBWOOFER (subwoofer)→..... (Press u to cycle the speakers in the reverse order.) 4 5 Press j / i to adjust speaker volumes. Notes • You cannot adjust speaker levels if the “SOUND 1 SPEAKER SET” parameter in the set menu is set to NON. • You cannot adjust the subwoofer level if the “1D BASS” parameter in “SOUND 1 SPEAKER SET” in the set menu is set to MAIN. • If you use LEVEL to adjust speaker levels, the speaker levels you previously set with the test tone will also change. • If you select “BASIC 1 SETUP” in the set menu and then select “SET”, speaker levels change in response to any changes you make in ”BASIC 1 SETUP”. 4 1 2 • Pressing LEVEL once opens the level display. Press u / d at this time to select a speaker. Press j / i to adjust the speaker volume. • The center and rear speakers can be adjusted by a maximum of –10dB ~ +10dB. • The main speakers and subwoofer can be adjusted by a maximum of –20dB ~ 0dB. 3 TEST RETURN 3 y 3 ROCK 2 DISPLAY RETURN 1 2 JAZZ TV THTR MOVIE1 A/B/C/D/E A/B/C/D/E – – MUTE MUTE MUSIC 1 Press TEST. The unit will output a test tone. Press TEST when you have completed your adjustment. The test tone halts. Notes • You cannot enter test mode if headphones are connected to the PHONES jack. Remove the headphones from the PHONES jack. • You cannot adjust speaker volumes if the “SOUND 1 SPEAKER SET” parameter on the set menu is set to NON. • You cannot adjust the subwoofer level if the “1D BASS” parameter in “SOUND 1 SPEAKER SET” in the set menu is set to MAIN. • If you select “BASIC 1 SETUP” in the set menu and then select “SET”, speaker levels change in response to any changes you make in “BASIC 1 SETUP”. y • Depending on the source the unit is reproducing, the speaker levels set with the test tone may not be to your liking. If this is the case, adjust the speaker levels while listening to the source. 46 0110V340R_46-49_EN(U).p65 46 03.3.28, 11:54 AM SOUND FIELD PROGRAM PARAMETER EDITING 5 Changing parameter settings The initial sound field program settings will provide you with an excellent listening experience as they are. It is not necessary to alter these settings, but you can create an original listening environment by doing so. Repeat steps 2 – 4 if you wish to alter other parameters. Note • You cannot alter these parameters if the “OPTION 2 MEM. GUARD” parameter in the set menu is set to ON. Change this setting to OFF if you wish to alter any other parameters. Note • The editable parameters vary depending on the sound field program you select. Refer to the explanation for the parameter. AMP 1 TV + + + VOL CH VOLUME – – MUTE INPUT HALL JAZZ ROCK – 2 3 MUTE 1 MUSIC 5 /DTS ENTERTAINMENT TV THTR MOVIE1 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER 9 2 4 MOVIE2 6 LEVEL SET MENU TITLE MENU 3 A/B/C/D/E – + SELECT TEST DISPLAY RETURN PRESET/CH 4 1 Press AMP. 2 Select a sound field program. AMP HALL JAZZ ROCK 1 2 3 MUSIC 5 /DTS 9 TV THTR MOVIE1 4 MOVIE2 6 7 8 NIGHT 6.1/5.1 STEREO 0 +10 ENTER Press u / d to select the parameter you want to change. – SELECT ADDITIONAL INFORMATION 3 ENTERTAINMENT + PRESET/CH 4 Press j / i to change the parameter setting. – SELECT + PRESET/CH English 47 0120V340R_50-58_EN(U)d.p65 47 03.4.2, 4:29 PM SOUND FIELD PROGRAM PARAMETER EDITING Digital sound field parameter descriptions You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all of the following parameters are found in every program. ■ DSP LEVEL Function: Description: This parameter adjusts the level of all the DSP effect sounds within a narrow range. Depending on the acoustics of your listening room, you may want to increase or decrease the DSP effect level relative to the direct sound. Control Range: –6 dB to +3 dB ■ DELAY Function: Adjusts the time difference between the beginning of the sound from the main speakers and the beginning of the sound effect from the rear speakers. The larger the value, the later the sound effect is generated. Control range: 1 to 99 ms (Control range varies depending on the input source and the DSP program you use.) For 5ch Stereo Function: These parameters adjust the volume level for each channel in 5-channel stereo mode. Control range: 0 to 100% ■ CT LEVEL (Center level) ■ RL LEVEL (Rear left level) ■ RR LEVEL (Rear right level) For PRO LOGIC II Music ■ PANORAMA Function: Choices: Extends the front stereo image to include the surround speakers for a wraparound effect. OFF/ON, initial setting is OFF. ■ DIMENSION Function: Gradually adjusts the soundfield either towards the front or towards the rear. Control range: –3 (towards the rear) to +3 (towards the front), initial setting is STD (standard). ■ CT WIDTH (Center width) Function: Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the center image towards the main left and right speakers. Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only from main left and right speakers), initial setting is 3. 48 0120V340R_50-58_EN(U)d.p65 48 03.4.2, 4:29 PM TROUBLESHOOTING Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. ■ General Problem This unit fails to turn on when STANDBY/ ON (or SYSTEM POWER) is pressed, or enters in standby mode soon after the power has been turned on. Cause Remedy Refer to page The power cord is not connected or the plug is not completely inserted. Connect the power cord firmly. The protection circuitry has been activated. Make sure all speaker wire connections on this unit and on all speakers are secure and that the wire for each connection is not touching anything other than its respective connection. 15 – 16 This unit has been exposed to a strong external electric shock (such as lightning and strong static electricity). Set this unit in standby mode, disconnect the power cord, plug it back in after 30 seconds, then use it normally. – Incorrect input or output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. 9 – 16 No appropriate input source is selected. Select an appropriate input source with INPUT l / h or 6CH INPUT (or the input selector buttons). 21 The speaker connections are not secure. Secure the connections. The main speakers have not been selected properly. Press and set SPEAKERS ON/OFF to ON, and select the proper main speakers with SPEAKERS A/B. 21 The volume is turned down. Turn up the volume. 22 The sound is muted. Press MUTE or any operation buttons on the unit to cancel mute and adjust the volume. – Digital signals which this unit cannot reproduce are being received from a source component e.g.; a CD-ROM. Play a source whose signals this unit can reproduce. – The protection circuit has been activated because of a short circuit, etc. Check the speaker wires are not touching each other and then turn the unit back on. – The sleep timer has turned the unit off. Turn on the power, and play the source again. – The sound is muted. Press MUTE or any operation buttons on the unit to cancel a mute and adjust the volume. – No sound / weak sound from particular speakers. Incorrect cable connections. Connect the cables properly. If the problem persists, the cables may be defective. 15 No sound from the effect speakers. The sound effect is switched off. Press STEREO to turn it on. – A Dolby Surround, Dolby Digital or DTS decoding DSP program is being used with material not encoded with Dolby Surround, Dolby Digital or DTS. Select another DSP program. 24 – 29 No sound. English A digital signal with a sampling frequency of greater than 48 kHz is input to this unit. 15 – 16 ADDITIONAL INFORMATION The sound suddenly goes off. – – 49 0120V340R_50-58_EN(U)d.p65 49 03.4.2, 4:29 PM TROUBLESHOOTING Cause Problem No sound from the center speaker. Remedy The output level of the center speaker is set to minimum. Raise the level of the center speaker. 46 “SOUND 1A CENTER” on the set menu is set to NON. Select the appropriate mode for your center speaker. 38 One of the Hi-Fi DSP programs (1 to 4) has been selected (except for 5ch Stereo). Select another DSP program. The source encoded with a Dolby Digital or DTS signal does not have a center channel signal. No sound from the rear speakers. No sound from the subwoofer. 24 – 29 – The output level of the rear speakers is set to minimum. Raise the output level of the rear speakers. A monaural source is being played with program 9. Select another DSP program. “SOUND 1D BASS” on the set menu is set to MAIN when a Dolby Digital or DTS signal is being played. Select SWFR or BOTH. 39 “SOUND 1D BASS” on the set menu is set to SWFR or MAIN when a 2-channel source is being played. Select BOTH. 39 The source does not contain low bass signals (90 Hz and below). Poor bass reproduction. Refer to page 46 24 – 29 – “SOUND 1D BASS” on the set menu is set to SWFR or BOTH and your system does not include a subwoofer. Select MAIN. The speaker mode settings (main, center or rear) on the set menu does not match your speaker configuration. Select the appropriate position for each speaker based on the size of the speakers in your configuration. 38 – 39 A “humming” sound can be heard. Incorrect cable connections. Firmly connect the audio plugs. If the problem persists, the cables may be defective. – The volume level cannot be increased, or the sound is distorted. The component connected to the OUT (REC) jacks of this unit is turned off. Turn on the power to the component. – The sound effect cannot be recorded. It is not possible to record the sound effect with a recording component. The sound field parameters and some other settings on the unit cannot be changed. “OPTION 2 MEM. GUARD” in the set menu is set to ON. Set “OPTION 2 MEM. GUARD” in the set menu to OFF. – The unit does not operate properly. The internal microcomputer has been frozen by an external electric shock (such as lightning or excessive static electricity) or by a power supply with low voltage. Disconnect the AC power cord from the outlet and then plug it in again after about 30 seconds. – “CHECK SP WIRES” appears on the front panel display. The speaker cables are short circuited. Make sure all speaker cables are connected correctly. – There is noise interference from digital or high-frequency equipment, or this unit. This unit is too close to the digital or high-frequency equipment. Move this unit further away from such equipment. – The unit suddenly turns into standby mode. The internal temperature has become too high and the overheat protection circuitry has been activated. Wait until the unit cools down and then turn it back on. – – 50 0120V340R_50-58_EN(U)d.p65 50 39 03.4.2, 4:29 PM TROUBLESHOOTING ■ Tuner Problem Cause FM stereo reception is noisy. FM AM Remedy The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. Refer to page Check the antenna connections. Try using a high-quality directional FM antenna. 12 Use the manual tuning method. 31 There is distortion, and clear reception cannot be obtained even with a good FM antenna. There is multipath interference. Adjust the antenna position to eliminate multipath interference. – The desired station cannot be tuned in with the automatic tuning method. The station is too weak. Use a high-quality directional FM antenna. – Use the manual tuning method. 31 Previously preset stations can no longer be tuned in. The unit has been disconnected for a long period. Re-store the stations. 32 The desired station cannot be tuned in with the automatic tuning method. The signal is weak or the antenna connections are loose. Tighten the AM loop antenna connections and orient it for best reception. – Use the manual tuning method. 31 There are continuous crackling and hissing noises. Noises result from lightning, fluorescent lamps, motors, thermostats and other electrical equipment. Use an outdoor antenna and a ground wire. This will help somewhat, but it is difficult to eliminate all noise. 12 There are buzzing and whining noises (especially in the evening). A TV set is being used nearby. Move this unit away from the TV. – ■ Remote control The remote control does not work nor function properly. Cause Remedy Refer to page Wrong distance or angle. The remote control will function within a maximum range of 6 m (20 feet) and no more than 30 degrees off-axis from the front panel. 7 Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit. – The batteries are weak. Replace all batteries with new ones. 3 The manufacture code has not correctly set. Set the code correctly. 44 Try setting another code of the same manufacturer. 44 Even if the manufacturer code is correctly set, there are some models that do not respond to the remote control. English – 51 0120V340R_50-58_EN(U)d.p65 51 03.4.2, 4:29 PM ADDITIONAL INFORMATION Problem GLOSSARY ■ Dolby Surround Dolby Surround uses a 4 channel analog recording system to reproduce realistic and dynamic sound effects: 2 main left and right channels (stereo), a center channel for dialog (monaural), and a rear channel for special sound effects (monaural). The rear channel reproduces sound within a narrow frequency range. Dolby Surround is widely used with nearly all video tapes and laser discs, and in many TV and cable broadcasts as well. The Dolby Pro Logic decoder built into this unit employs a digital signal processing system that automatically stabilizes the volume on each channel to enhance moving sound effects and directionality. ■ Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (left, center, and right), and 2 rear stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (low frequency effect), the system has a total of 5.1 channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the rear speakers, more accurate moving sound effects and surround sound environment are possible than with Dolby Surround. The wide dynamic range (from maximum to minimum volume) reproduced by the 5 full-range channels and the precise sound orientation generated using digital sound processing provide listeners with previously unheard of excitement and realism. With this unit, any sound environment from monaural up to a 5.1-channel configuration can be freely selected for your enjoyment. ■ Matrix 6.1 The unit incorporates Matrix 6.1 decoder for Dolby Digital and DTS multi-channel software that enables 6.1channel reproduction by adding the rear center channel to existing 5.1-channel format. (The rear center channel is created from rear left and right channels, and outputted from virtual rear center speaker.) With this additional channel, you can experience more dynamic and realistic moving sound especially with scenes with “fly-over ” and “fly-around ” effects. ■ Dolby Pro Logic II Dolby Pro Logic II is an improved technique used to decode vast numbers of existing Dolby Surround software. This new technology enables a discrete 5channel playback with 2 main left and right channels, 1 center channel, and 2 rear left and right channels (instead of only 1 rear channel for conventional Pro Logic technology). A music mode is also available for 2-channel sources in addition to the movie mode. ■ DTS (Digital Theater Systems) Digital Surround DTS digital surround was developed to replace the analog soundtracks of movies with a 6-channel digital sound track, and is now rapidly gaining popularity in movie theaters around the world. Digital Theater Systems Inc. has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS digital surround in your home. This system produces practically distortion-free 6-channel sound (technically, a left, right and center channels, 2 rear channels, plus an LFE 0.1 channel as a subwoofer, for a total of 5.1 channels). ■ LFE 0.1 channel This channel is for the reproduction of low bass signals. The frequency range for this channel is 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low frequency range compared to the full-range reproduced by the other 5 channels in a Dolby Digital or DTS 5.1 channel systems. ■ CINEMA DSP Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater having many speakers and designed for acoustic effects. Since home conditions, such as room size, wall material, number of speakers, and so on, can differ so widely, it’s inevitable that there are differences in the sound heard as well. Based on a wealth of actually measured data, YAMAHA CINEMA DSP uses YAMAHA original sound field technology to combine Dolby Pro Logic, Dolby Digital and DTS systems to provide the visual and audio experience of movie theater in the listening room of your own home. ■ SILENT CINEMA YAMAHA has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound field so that accurate representations of all the sound field programs can be enjoyed using headphones. ■ Virtual CINEMA DSP YAMAHA has developed a virtual CINEMA DSP algorithm that allows you to enjoy DSP sound field surround effects even without any rear speakers by using virtual rear speakers. It is even possible to enjoy virtual CINEMA DSP using a minimal 2-speaker system that does not include a center speaker. 52 0120V340R_50-58_EN(U)d.p65 52 03.4.2, 4:29 PM GLOSSARY ■ PCM (Linear PCM) Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression. This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time. Standing for “pulse code modulation”, the analog signal is encoded as pulses and then modulated for recording. ■ Sampling frequency and number of quantized bits When digitizing an analog audio signal, the number of times the signal is sampled per second is called the sampling frequency, while the degree of fineness when converting the sound level into a numeric value is called the number of quantized bits. The range of rates that can be played back is determined based on the sampling rate, while the dynamic range representing the sound level difference is determined by the number of quantized bits. In principle, the higher the sampling frequency, the wider the range of frequencies that can be played back, and the higher the number of quantized bits, the more finely the sound level can be reproduced. ADDITIONAL INFORMATION English 53 0120V340R_50-58_EN(U)d.p65 53 03.4.2, 4:29 PM SPECIFICATIONS AUDIO SECTION FM SECTION • Minimum RMS Output Power for Main, Center, Rear 1 kHz, 0.1% THD, 6 Ω [U.S.A. and Canada models] ................................................. 70 W [Other models] ....................................................................... 60 W 1 kHz, 0.7% THD, 6 Ω [U.S.A. and Canada models] ................................................. 75 W [U.K., Europe, Australia and Korea models] ......................... 65 W • Tuning Range [U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz [Other models] .............................................. 87.50 to 108.00 MHz • DIN Standard Output Power [Europe model] 1 kHz, 0.7% THD, 4 Ω .......................................................... 75 W • Signal to Noise Ratio (IHF) Mono/Stereo .............................................................. 76 dB/70 dB • Maximum Power (EIAJ) [China, Korea and General models] 1 kHz, 10% THD, 6 Ω ........................................................... 80 W • 50 dB Quieting Sensitivity (IHF, 100% mod.) Mono/Stereo ........................ 2.0 µV (17.3 dBf) /25 µV (39.2 dBf) • Selectivity (400 kHz) ............................................................... 70 dB • Harmonic Distortion (1 kHz) Mono/Stereo ................................................................. 0.2%/0.3% • Stereo Separation (1 kHz) ....................................................... 42 dB • Dynamic Power (IHF, 6/4/2 Ω) [U.S.A. and Canada models] ................................... 85/100/115 W [Other models] ........................................................... 75/95/105 W • Frequency Response ........................... 20 Hz to 15 kHz +0.5, –2 dB • Frequency Response CD, etc. to Main L/R .............................. 10 Hz to 100 kHz, –3 dB • Usable Sensitivity ............................................................. 300 µV/m • Total Harmonic Distortion 1 kHz, 30 W, 6 Ω, Main L/R ................................................. 0.06% GENERAL • Signal to Noise Ratio (IHF-A Network) CD (250 mV, shorted) to Main L/R, Effect Off .............. h100 dB • Residual Noise (IHF-A Network) Main L/R ................................................................ 150 µV or less • Channel Separation (1 kHz/10 kHz) CD, etc. (5.1 kΩ terminated) to Main L/R ........ h60 dB/h45 dB • Tone Control (Main L/R) BASS Boost/Cut .................................................... ±10 dB/100 Hz TREBLE Boost/Cut ............................................... ±10 dB/20 kHz • Phones Output ........................................................... 300 mV/470 Ω • Input Sensitivity CD, etc. ................................................................... 150 mV/47 kΩ 6CH INPUT ............................................................ 150 mV/47 kΩ • Output Level OUT (REC) ........................................................... 150 mV/1.2 kΩ OUTPUT SUBWOOFER ............................................. 4 V/1.2 kΩ AM SECTION • Tuning Range ......................................... 530/531 to 1710/1611 kHz • Power Supply [U.S.A. and Canada models] ............................... AC 120 V/60 Hz [Australia model] ................................................. AC 240 V/50 Hz [U.K., Europe and Singapore models] ................ AC 230 V/50 Hz [Korea model] ...................................................... AC 220 V/60 Hz [China model] ...................................................... AC 220 V/50 Hz [General model] .................... AC 110-120 V/220-240 V, 50/60 Hz • Power Consumption [U.S.A. and Canada models] .................................. 210 W/280 VA [Other models] ..................................................................... 210 W Standby Mode ........................................................... 0.8 W or less • Dimension (W x H x D) ................................... 435 x 151 x 322 mm (17-1/8” x 5-15/16” x 12-11/16”) • Weight ................................................................. 8 kg (17 lbs 10 oz) *Specifications are subject to change without notice. VIDEO SECTION • Video Signal Type ...................................................... NTSC or PAL • Composite Video Signal Level ...................................... 1 Vp-p/75 Ω • Signal to Noise Ratio ........................................................... h50 dB • Frequency Response (MONITOR OUT) ............................................................... 5 Hz to 10 MHz, –3 dB 54 0120V340R_50-58_EN(U)d.p65 54 03.4.2, 4:29 PM LIST OF MANUFACTURER’S CODES TV Yamaha Admiral Aiwa Akai Alba AOC Bell&Howell Bestar Blaupunkt Blue sky Brandt Brocsonic Bush Clatronic Craig Croslex Curtis Mathis Daewoo Daytron Dual Emerson Ferguson First line Funai Fisher Fraba GE LG/Goldstar Goodmans Grundig Hitachi ICE Irradio Itt/Nokia JC Penny JVC Kendo KTV Loewe LXI Magnavox Matsui Mitsubishi NEC Nokia Nokia Oceanic Nordmende Onwa Panasonic Philco Philips Pioneer Portland Quasar Radio Shack RCA SABA Samsung Sanyo Schneider Scott Sharp Siemens Signature Sony Sylvania Telefunken 200V340U_manucode-b.p65 299 292 294 295 296 297 292 298 229 298 223 297 296 298 224 225 297 297 239 298 297 223 298 277 295 298 293 297 296 229 297 296 296 244 293 296 298 297 298 293 297 295 299 297 244 245 265 296 234 297 225 226 297 234 299 293 223 297 295 296 297 292 229 292 263 297 269 292 293 276 283 284 296 Thomson Toshiba Videch Wards 223 292 297 297 266 226 267 215 242 239 232 399 395 396 322 392 393 325 327 322 325 396 396 396 397 328 392 333 327 393 397 328 396 334 332 325 325 393 392 392 396 392 396 395 393 325 392 396 396 328 333 399 397 392 393 395 323 325 327 325 333 325 325 337 325 325 325 393 354 394 393 337 392 393 394 VCR 222 226 298 224 227 228 224 239 232 265 266 278 233 297 298 298 238 239 234 235 236 239 237 223 249 242 243 285 245 297 234 237 246 247 286 239 248 297 225 226 233 225 239 297 259 287 252 282 245 266 235 236 253 288 211 225 239 235 256 235 293 297 269 239 233 254 255 268 297 234 265 248 279 256 257 258 266 262 275 272 273 274 212 239 232 213 214 225 264 265 266 1 Yamaha Admiral Aiwa Akai Audio Dynamic Bell&Howell Blaupunkt Brocsonic Bush Canon CGM Citizen Craig Curtis Mathis Daewoo DBX Dimensia Emerson Fisher Funai GE LG/Goldstar Goodmans Grundig Hitachi Instant Replay Itt/Nokia JC Penny JVC Kendo Kenwood Loewe Luxor LXI Magnavox Marantz Marta Matsui Memorex Minolta Mitsubishi Multitech NEC Nokia Nokia Oceanic Okano Olympic Orion Panasonic Pentax Philco Philips Phonola Pioneer Quasar RCA/PROSCAN Realistic Samsung Sansui Sanyo Schneider 397 398 329 323 324 394 326 328 332 328 333 334 335 394 334 336 333 387 388 337 338 333 349 342 343 328 393 394 328 333 349 394 344 345 346 347 394 396 337 396 397 336 349 326 328 394 336 349 344 348 359 352 353 348 354 394 344 383 395 328 328 355 378 384 385 386 349 328 326 328 337 356 357 328 326 328 333 335 349 358 369 397 328 336 359 362 358 363 364 365 366 336 367 03.4.2, 4:33 PM Scott 358 Seleco Sharp Siemens Signature 2000 Sony Sylvania Symphonic Tandberg Tashiro Tatung Teac Technics Telefunken Thorn Toshiba Universum W.WHouse Wards 399 335 336 348 359 352 354 322 395 393 395 368 397 397 334 396 392 392 325 376 393 335 396 396 395 362 382 397 379 372 373 374 375 325 326 328 394 394 397 328 377 396 369 389 327 376 396 336 362 DVD player Yamaha DENON Funai HITACHI JVC KENWOOD Mitsubishi Onkyo Panasonic Philips Pioneer RCA Samsung Sharp Sony Toshiba LG/GOLD STAR THOMSON 699 623 625 626 627 628 629 632 623 699 636 639 642 643 644 634 645 646 622 623 647 624 633 634 635 647 637 638 MD Recorder Yamaha 599 CD player Yamaha 199 CD Recorder Yamaha YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA 499 ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA 200V340U_manucode-b.p65 2 03.4.2, 4:33 PM Printed in China WB14620