Yamaha CDC-902 Handleiding

Categorie
CD spelers
Type
Handleiding

Deze handleiding is ook geschikt voor

Natural Sound Compact Disc Player
Lecteur de disque audionumérique de la série “Natural Sound”
Thank you for selecting this YAMAHA Compact Disc Player.
Nous vous remercions d’avoir porté votre choix sur ce lecteur de disque
audionumérique YAMAHA.
OWNER’S MANUAL
MODE D’EMPLOI
CDC-902 / 502
CONTENTS
Safety Instructions.................................................. 2
Features................................................................. 4
Connections........................................................... 5
Identification of Components ................................. 6
Basic Operation ..................................................... 8
Random-Sequence Play...................................... 13
Program Play ....................................................... 14
Repeat Play.......................................................... 16
Index Search........................................................ 16
CD Synchronized Recording.................................17
Track Programming for Recording to Tape
for CDC-902 only............................................. 18
Notes about the Remote Control
Transmitter ........................................................... 22
Notes about Handling Compact Discs................. 22
Troubleshooting.................................................... 23
Specifications....................................................... 23
TABLE DES MATIERES
Caractéristiques .................................................. 24
Attention ............................................................. 25
Connexions ......................................................... 26
Identification des composants ............................ 27
Fonctionnement de base .................................... 29
Lecture en séquence aléatoire ........................... 34
Lecture programmée .......................................... 35
Lecture repetée .................................................. 37
Recherche d’index .............................................. 37
Enregistrement synchronise d’un
disque audionumérique ........................................38
Programmation des plages pour
enregistrement sur bande
CDC-902 seulement ........................................ 39
Remarques concernant la télécommande .......... 43
Remarques concernant la manipulation des disques
.... 43
Dépistage de pannes .......................................... 44
Caractéristiques techniques ............................... 44
2
SAFETY INSTRUCTIONS
1 Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2 Retain Instructions – The safety and operating instructions
should be retained for future reference.
3 Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and other instructions
should be followed.
5 Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6 Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
unit and cart combination to overturn.
7 Wall or Ceiling Mounting – The unit should
be mounted to a wall or ceiling only as recommended by
the manufacturer.
8 Ventilation – The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be situated
on a bed, sofa, rug, or similar surface, that may block the
ventilation openings; or placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow
of air through the ventilation openings.
9 Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances that
produce heat.
10 Power Sources – The unit should be connected to a
power supply only of the type described in the operating
instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.
15 Damage Requiring Service – The unit should be serviced
by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into the
unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing – The user should not attempt to service the unit
beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
17 Power Lines – An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
Explanation of Graphical Symbols
CAUTION
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
IMPORTANT!
Please record the serial number of this unit in the space
below.
Model:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference
3
English
1 To ensure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers,
motors). To prevent fire or electrical shock, do not expose
to rain and water.
3 Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4 Never open the cabinet. If a foreign object drops into the
set, contact your dealer.
5 Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
6 Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
7 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit
is faulty.
8 Do not place another component on top of this unit,
because to do so will discolor or damage the surface of
the unit.
9 To prevent damage by lightning, disconnect the power
cord from the household AC outlet during an electrical
storm.
10 When disconnecting the power cord from the household
AC outlet, grasp the plug; do not pull the cord.
11 When moving the unit, be sure to first disconnect the
power cord from the household AC outlet, and disconnect
cords connected to other equipment.
CAUTION FOR CARRYING THIS UNIT
Be sure not to carry or tip this unit with discs remaining in it.
CAUTION FOR MOVING THIS UNIT
When moving this unit, first remove all discs from the disc tray and
close the tray by pressing the OPEN/CLOSE button. After you
confirm that the display lights up as shown below, switch off the
power by pressing the POWER switch, and then disconnect the
power plug from the AC outlet.
Never switch off the power untill the display lights up as above,
otherwise this unit will break down during moving because the
internal mechanism is not locked.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personel only.
To avoid electrical shock, do not open the unit. Refer
servicing to qualified personnel only.
DANGER: The use of optical instrument with this product will
increase eye hazard.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
DANGER
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
The apparatus is not disconnected from the AC power
source as long as it is connected to the wall outlet, even if
the apparatus itself is turned off.
WARNING
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, YAMAHA
and the Electronic Industries Association’s
Consumer Electronics Group recommend you to
avoid prolonged exposure from excessive
volume levels.
We Want You Listening For A Lifetime (for US customers only)
Laser Diode Properties
• Material: GaAlAs
• Wavelength: 780nm
• Emission Duration: continuous
• Laser Output: max. 44.6µW*
* This output is the value measured at a distance of about
200mm from the objective lens surface on the Optical Pick-
up Block.
4
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions.
Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
FEATURES
5-Disc Carousel Auto-changer
Full Opening Disc Tray for Changing 5
Discs at a Time
PLAYXCHANGE; Disc Changing
Capability while Playing Another
Random Access Programmable Play
Random-Sequence Play
Single Track/Entire Disc/All Disc Repeat
Play
Adjustable Display Brightness
Remote Control Capability
Disc Scanning Capability Useful for Disc
Searching or Disc Checking
CD Synchronized Recording with a
Compatible YAMAHA Tape Deck
CDC-902 only
Automatic Programming for Recording to
Tape
Automatic Peak Level Searching
Capability
Optical Digital Output
CAUTION (FOR CANADA MODEL)
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT AND FULLY INSERT.
FOR CANADIAN CUSTOMER
THIS CLASS B DIGITAL APPARATUS MEETS ALL
REQUIREMENTS OF THE CANADIAN INTERFERENCE-
CAUSING EQUIPMENT REGULATIONS.
DIGITAL INCD
OPTICAL
OPTICAL
DIGITAL
AUDIO
OUT
LINE OUT
LINE OUT
5
English
When the LINE OUT (analog) terminals of this
unit are used (
)
Be sure that the left (“L”) and right (“R”) LINE OUT terminals
are connected to the corresponding (left and right) terminals
of the amplifier or other component.
Connect the “LINE OUT” terminals to the “CD” (or “AUX”)
terminals of the amplifier. If the amplifier does not have
such terminals, use the “TAPE PB” terminals. For additional
details concerning these connections, refer to the operation
instructions for the amplifier being used.
CDC-902 only
Adjust the level of signals output into an amplifier, etc. by
using the OUTPUT LEVEL button.
CDC-902 only
When the DIGITAL AUDIO OUT (OPTICAL)
terminal of this unit is used (
)
Before using this terminal, remove the terminal’s cover by
pulling it.
Make the connection from this terminal to the optical input
terminal of an amplifier by using a commercially available
optical fiber cable.
* Use an optical fiber cable that conforms to EIAJ
standards. Other cables might not function correctly.
Be sure to attach the terminal’s cover when this terminal is
not being used, in order to protect the terminal from dust.
Set the level of signals output into an amplifier to max. by
using the OUTPUT LEVEL button.
This terminal can also be connected to the optical input
terminal of a digital audio tape deck (DAT) etc. to record CD
onto tape directly.
CONNECTIONS
Before making any connections, switch OFF the power to
the unit and the amplifier or other component.
Connections should be made to the correct input terminals
of the amplifier or other component.
If the placement of this unit causes noise to other
equipment, such as a tuner, separate them from each other.
CDC-502
Amplifier
Choose one of the ways listed below to connect this unit to your amplifier.
Connection cord
(included)
Connection cord
(included)
CDC-902
To AC outletTo AC outlet
Optical fiber cable
(not included)
6
POWER
12345
SKIP/SEARCH
+10 1 2 3 4 5 6 7 8 9 0
PROG
FILE
/
SAVE
PLAYXCHANGE
OPEN/CLOSE
OUTPUT LEVEL
PHONES
DISC
NATURAL SOUND COMPACT DISC PLAYER
PEAK
/
AUTO
DISPLAY OFF
–+
IDENTIFICATION OF COMPONENTS
FRONT PANEL
* ( ) indicates the page number on which the control and its function are best described.
* The control functions on the main unit and on the remote
control transmitter are virtually identical, with the exceptions
below.
* The (PLAY/PAUSE) button on the main unit has both
the functions of the PLAY button and the PAUSE button on
the remote control transmitter.
* The SKIP/SEARCH buttons on the main unit have both the
functions of the SKIP button and the SEARCH button on the
remote control transmitter.
POWER
1234 5
SKIP/SEARCH
PLAYXCHANGE
OPEN/CLOSE
DISC
NATURAL SOUND COMPACT DISC PLAYER
/
POWER switch (p. 8)
PLAYXCHANGE button (p. 9)
PHONES jack (p. 12)
Remote control sensor (p. 22)
Display panel
PEAK button (p. 21)
POWER switch (p. 8)
Disc tray (p. 8)
Disc tray (p. 8) DISC-select buttons (p. 8)
PLAYXCHANGE button (p. 9)
Display panel Remote control sensor (p. 22)
DISC-select buttons (p. 8)
CDC-502
CDC-902
7
English
* ( ) indicates the page number on which the control button is best described.
REMOTE CONTROL TRANSMITTER
CLEAR button (p. 15)
OPEN/CLOSE button (p. 8)
PROG button (p. 14)
Numeric buttons (p. 10)
DISC SKIP button (p. 8)
SYNCHRO button (p. 17)
SKIP button (p. 10)
SEARCH button (p. 10)
TIME display mode-select button
(p. 11)
DIMMER button (p. 12)
REPEAT button (p. 16)
RANDOM button (p. 13)
DISC SCAN button (p. 11)
PAUSE button (p. 9)
PLAY button (p. 8)
STOP button (p. 9)
INDEX button (p. 16)
CDC-902 only
OUTPUT LEVEL button (p. 12)
Disc play MODE-select button
(p. 8)
21
TAPE
SYNCHRO
3
INDEX
PROGCLEAR
87 9 0
54 6 +10
DIMMER TIME
OPEN/
CLOSE
REPEAT RANDOMMODEDISC SCAN
SEARCH
SKIP
OUTPUT LEVEL
–+
STOP PAUSE PLAY
DISC SKIP
CDC-902 only
TAPE button (p. 18)
Parts in the shaded areas are provided for CDC-902 only.
1 Turn the power on.
2 Open the disc tray and load discs.
3 Close the disc tray
4 Select a desired disc play mode (1DISC or 5DISC)
confirming it on the display.
“1DISC” mode: The unit will play a designated disc only.
“5DISC” mode: The unit will play all discs on the tray in
sequence.
5 Start play from the first track of the disc 1.
* If necessary, select a desired disc by using the DISC SKIP
button or a DISC-select button.
To turn off the power
Press the POWER switch again.
1DISC 5DISC
8
BASIC OPERATION
POWER
OPEN/
CLOSE
OPEN/
CLOSE
MODE
PLAY
DISC SKIP
PLAY
Shows the selected disc
mode.
Disc tray
This manual describes how to operate this unit by using the remote control transmitter.
To operate this unit on the front panel, use the corresponding buttons on the front panel.
POWER
234
DISC
CDC-902 CDC-502
Label side
upward
(On the front panel)
1
To stop play temporarily
To resume play, press the PAUSE button again (or press the
PLAY button).
* The (PLAY/PAUSE) button on the front panel can also
be used to stop play temporarily or to resume play.
To stop play completely
STOP
or
9
English
Notes
After closing the disc tray by pressing the OPEN/CLOSE
button when this unit is stopped or after selecting any disc
by using the DISC SKIP button when this unit is stopped,
the display shows the total number of tracks and the total
recorded time of the selected disc for a few seconds.
Additionally, you can close the disc tray by pressing the
PLAY ( ) button, a DISC-select button on the front
panel, a numeric button or the RANDOM button, or by
pressing the front edge of the disc tray gently. If the tray is
closed in these ways, play will begin automatically, however,
the display will not show the total number of tracks and the
total recorded time of the first selected disc.
PLAYXCHANGE
During play, you can open the disc tray by pressing the
PLAYXCHANGE button on the front panel without interrupting
disc play. However, in this case, pressing the DISC SKIP
button has no effect.
Display information at disc play
Encloses the tray number of the selected disc.
Lights up the tray numbers with discs only.
* All tray numbers light up when the power turns on, and
whenever the disc tray rotates to change a disc selected,
a tray number with no disc goes off.
Shows the selected track number.
Shows the time displays. (Refer to “Selecting time
displays” on page 11.)
Displays the numbers that correspond to the numbers of
the tracks (as high as number 20) on the selected disc.
After each track is played, its corresponding number
disappears so the number of remaining tracks (and their
numbers) can be seen at a glance.
CDC-902 only
Shows the level of signals output into an amplifier or the
headphone level adjusted by using the OUTPUT LEVEL
button.
1 2 3 4 5 6 7 8 9 10 11 12
TOTAL
5DISC
3 4 5 6 7 8 9 10 11 12
REMAIN
5DISC
➂➃
PAUSE
or
(On the front panel)(On the front panel)
DIRECT PLAY
Select a desired track by using the numeric buttons.
Example: To select track 25
Press
twice, then immediately press
once.
* If a track number higher than the highest track number on
the disc is selected, the last track on the disc will be played.
SKIP PLAY
To play from the beginning of the track following the one now
playing
To play from the beginning of the track now playing
To play from the beginning of the track before the one now
playing
These operations can also be performed when the unit is
paused or stopped.
When using the SKIP button on the remote control
transmitter:
If the button is pressed and held, the track number is
continuously changed to higher numbers (or lower
numbers).
When using the SKIP/SEARCH buttons on the front panel:
Be careful not to press and hold a button, otherwise the
selected track is played forward (or backward) rapidly.
+10
10
SKIP
To play a desired track on the disc
5
5 6 7 8 9 10 11 12
1DISC
SKIP
SKIP
The selected track
number is displayed.
5
To advance rapidly
To reverse rapidly
The sound can be heard (although slightly garbled) during
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
Manual search can also be performed while disc play is
paused, though no sound will be heard.
When using the SKIP/SEARCH buttons on the front panel:
Be careful not to release the button just after it is pressed,
otherwise the play is skipped to the beginning of the next
track or returned to the beginning of the current track.
To advance or reverse play rapidly (MANUAL SEARCH)
SEARCH
SEARCH
(Press and hold.)
(Press and hold.)
➀➁
(Twice)
11
English
When the DISC SCAN button is pressed when this unit is
stopped, this unit will play an initial part of each disc in turn.
Each disc is played for 8 seconds.
If, during this play, you find a disc that you want to listen to,
press the DISC SCAN button once again or press the PLAY
button to cancel this function. The unit will enter into the normal
play mode.
Notes
During this play, the disc tray numbers flash on and off on
the display. Every time the play of a disc is finished, the
corresponding tray number is changed from flashing to
lighting.
There might be cases that you will hear no sound during disc
scan. An example of this would be if the disc being played
has a long blank space between tracks.
Scanning discs to search for a desired disc (or to check discs on the disc tray)
DISC SCAN
Note
The remaining time
will not be displayed if the track
number is 21 or higher.
Selecting time displays
You can select any of the four time displays by pressing the TIME display mode-select button.
2 3 4 5 6 7 8 9 10 11 12
REMAIN
5DISC
2 3 4 5 6 7 8 9 10 11 12
5DISC
2 3 4 5 6 7 8 9 10 11 12
REMAIN
TOTAL
5DISC
2 3 4 5 6 7 8 9 10 11 12
TOTAL
5DISC
TIME
Elapsed time of the track now playing
Remaining time of the track now playing
Total disc play time
Total remaining time on the disc
12
OUTPUT LEVEL
–+
PHONES
OUTPUT LEVEL
–+
or
(On the front panel)
Changing brightness of the display
If desired, you can change brightness of the display
in three degrees by pressing the DIMMER button.
Normal illumination
Slightly dim
Dim
DIMMER
CDC-902 only
Adjusting the level of signals output into an
amplifier, etc.
You can adjust the level of sound signals output from the LINE
OUT terminals on the rear panel into an amplifier, etc. as you
prefer by using the OUTPUT LEVEL button.
* When the DIGITAL AUDIO OUT (OPTICAL) terminal is used
for the connection, set the level of output signals to max.
* The level of output signals can be checked on the display.
CDC-902 only
When you listen with headphones
Connect the headphones to the PHONES jack and adjust the
volume by using the OUTPUT LEVEL button.
* Note that the use of the OUTPUT LEVEL button will also
vary the level of the signal output to an amplifier, etc.
13
English
1 Load one or more discs.
2 Close the disc tray.
3 Select a desired disc play mode (1DISC or 5DISC).
* If you select “1DISC” mode, next select a desired disc by
using the DISC SKIP button on the remote control
transmitter or a DISC-select button on the front panel.
4
“RNDM” lights up on the display.
To cancel random-sequence play
Press the STOP button or RANDOM button once again, or
open the disc tray by pressing the OPEN/CLOSE button.
“RNDM” disappears from the display.
Notes
This feature will not function during programming, or during
program play.
If the SKIP button is pressed during random-sequence
play, the next randomly programmed track will be played. If
the SKIP button is pressed, play will return to the
beginning of the track now being played.
This indication appears while the unit is
mixing up tracks.
Total remaining time on the disc will not be displayed during
random-sequence play.
RANDOM-SEQUENCE PLAY
You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or a
designated disc on the disc tray.
MODE
21
TAPE
SYNCHRO
3
INDEX
PROGCLEAR
87 9 0
54 6 +I0
DIMMER TIME
OPEN/
CLOSE
REPEAT RANDOMMODEDISC SCAN
SEARCH
SKIP
OUTPUT LEVEL
–+
STOP PAUSE PLAY
DISC SKIP
2
4
3
DISC SKIP
21
SYNCHRO
3
INDEX
PROGCLEAR
87 9 0
54 6 +I0
DIMMER TIME
OPEN/
CLOSE
REPEAT RANDOMMODEDISC SCAN
SEARCH
SKIP
STOP PAUSE PLAY
DISC SKIP
4
2
3
DISC SKIP
CDC-902 CDC-502
RANDOM
OPEN/
CLOSE
1 Stop the unit.
2 If you will select tracks from a disc (or discs) other than
the disc on the Disc 1 tray, make this unit display the
total recorded time of each disc to be used by pressing
the DISC SKIP button in turn.
* Without this operation, the total time of the
programmed tracks will not be displayed during
programming.
3 Press the PROG button to begin programming.
4 If necessary, select a desired disc.
5 Program a desired track by pressing the corresponding
numeric button.
6 Repeat steps 4 – 5 to program more tracks. You can
select the same track again.
7 When the programming is completed;
14
PROGRAM PLAY
You can enjoy listening to your favorite tracks selected from one or more discs in any desired order by programming tracks.
PLAY
PROG
TOTAL
PROG
DISC SKIP
DISC SKIP
or
234
DISC
5
21
TAPE
SYNCHRO
3
INDEX
PROGCLEAR
87 9 0
54 6 +I0
DIMMER TIME
OPEN/
CLOSE
REPEAT RANDOMMODEDISC SCAN
SEARCH
SKIP
OUTPUT LEVEL
–+
STOP PAUSE PLAY
DISC SKIP
3
2, 4
5
7
1
21
SYNCHRO
3
INDEX
PROGCLEAR
87 9 0
54 6 +I0
DIMMER TIME
OPEN/
CLOSE
REPEAT RANDOMMODEDISC SCAN
SEARCH
SKIP
STOP PAUSE PLAY
DISC SKIP
5
7
3
2, 4
1
(On the front panel)
STOP
CDC-902 CDC-502
15
English
To stop program play
Press the STOP button. The first programmed track number
will be displayed.
To resume play, press the PLAY button. Play will begin from
the beginning of the program.
To cancel a programmed sequence
There are several methods, as described below.
Press the STOP button or the CLEAR button while the unit
is stopped.
Open the disc tray.
Switch off the power.
To check program data
1. If during program play, press the STOP button.
2. Press the PROG button.
3. Each time the SKIP button is pressed, the track
numbers and sequential order of the programmed tracks
can be checked one after another. The display of the track
number can be returned (sequentially in reverse order) by
pressing the SKIP button.
To correct program data
1. Follow the procedure described in “To check program
data”.
2. Display the track number to be corrected by pressing the
SKIP button.
3. Press a numeric button to select a track to replace the one
displayed. The previously programmed track will be
cleared from the memory and the new one will be
programmed.
4. After the correction has been completed, press the PROG
button or PLAY button once again.
Display information during programming
Shows the program number for the track to be programmed
next.
Shows the selected disc and track number.
Shows the total time of the tracks currently programmed.
Shows only the numbers of programmed tracks on the
selected disc.
* If “P-01” does not appear on the display after the PROG
button is pressed, press the TIME display mode-select
button.
* If the total time exceeds 99 minutes and 59 seconds, the
time will not be displayed.
Notes
You can program as many as 40 tracks at one time.
You can program a whole disc by pressing “0”, instead of
one track. At that time, “AL” flashes on the display.
The total time of the programmed tracks will not be
displayed, if a track number higher than 20 is programmed.
If, during programming, the TIME display mode-select button
is pressed, the program number display can be changed to
display the total time of the programmed tracks or no
information. To return to the previous display, press the
TIME display mode-select button once again.
The SKIP ( and ) button can be used during
playing, but only within the range of the programmed tracks.
The SEARCH ( and ) button can be used during
playing to search all tracks, including unprogrammed tracks.
6
TOTAL
PROG
TOTAL
PROG
➁➂
16
1 Select a track which has index numbers.
2
3 Select the desired index number.
To cancel the index search function
Press the INDEX button.
Notes
Not all discs have index numbers. The index system is a
method for sub-dividing tracks into smaller divisions (such
as, for example, the movements within classical
symphonies) for easier location of those parts. The liner
notes with the disc usually tell if such index numbers are
included.
If an index number is selected that is higher than any index
number on that disc, play will start from the last index
number point on the disc.
For some discs, play may begin slightly prior to the actual
designated index point.
If the disc has no encoded index points, play will begin from
the start of the selected track.
The index number can be designated only while “INDEX” is
illuminated on the display.
SINGLE REPEAT (REP S)
A single track is repeatedly played.
* This is also available in the program play mode and the
random-sequence play mode. (If the repeat play mode is
switched off, the program play mode or the random-
sequence play mode will be resumed.)
FULL REPEAT (REP F)
In the “1DISC” disc play mode: A designated disc is played
repeatedly played.
In the “5DISC” disc play mode: All discs on the disc tray are
repeatedly played.
* In the program play mode, all programmed tracks are
repeatedly played.
* In the random-sequence play mode, all randomly sequenced
tracks are repeatedly played in the same order.
6 7 8 9 10 11 12
INDEX
INDEX SEARCH
If the disc includes index numbers, play can be started from any desired index number.
REPEAT PLAY
You can play any desired track or disc (or a set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will
change whenever you press the REPEAT button.
3
5
REPEAT
INDEX
(OFF)
SREP
FREP
6 7 8 9 10 11 12
INDEX
17
English
1 Select a disc.
2 Load a tape on the tape deck.
* CDC-902 only
The peak level searching function of this unit is
useful for adjusting recording level on the tape deck.
(Refer to page 21.)
3
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this mode, the time display on this unit flashes on
and off.
4 If desired, select the track to be recorded first.
5
Both CD play and tape deck recording begin.
* CD play begins a little later than recording.
6 If you want to stop recording temporarily and restart
recording from a desired track, follow steps 3–5 again.
To cancel this function
Press the STOP button.
Notes
To finish or stop the recording, press the “STOP” button on
the tape deck.
Programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
page 14–15 for the programming procedure.)
CDC-902 only
This function can also be used together with the automatic
tape-programming function. (Refer to page 18–20.)
This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on
tape very easily and more precisely.
This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to
know whether it is compatible or not.)
* This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s
remote control transmitter at the same time.
PLAY
SYNCHRO
CD SYNCHRONIZED RECORDING
DISC SKIP
21
TAPE
SYNCHRO
3
INDEX
PROGCLEAR
87 9 0
54 6 +I0
DIMMER TIME
OPEN/
CLOSE
REPEAT RANDOMMODEDISC SCAN
SEARCH
SKIP
OUTPUT LEVEL
–+
STOP PAUSE PLAY
DISC SKIP
1
4
5
4
3
5
SKIP
or
21
SYNCHRO
3
INDEX
PROGCLEAR
87 9 0
54 6 +I0
DIMMER TIME
OPEN/
CLOSE
REPEAT RANDOMMODEDISC SCAN
SEARCH
SKIP
STOP PAUSE PLAY
DISC SKIP
4
5
4
1
3
CDC-902 CDC-502
18
1 Stop the unit.
2 Select the disc.
3 The peak level searching function of this unit is useful
for adjusting recording level on the tape deck. (Refer to
page 21.)
4
Enter the tape’s total possible recording time (tape length).
You can select any of four tape lengths by pressing the
TAPE button.
5 Otherwise, you can also enter the tape’s total possible
recording time manually.
Example: For a C-64 tape (32 minutes on each side)
6 Press the REPEAT button.
The unit automatically programs tracks for side A and
side B separately considering the tape’s total time.
7 Begin recording on the tape deck and press the PLAY
button on this unit at the same time.
8 The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and, at
the same time, press the PLAY or PAUSE button on
this unit.
Notes
All tracks may not be programmed if the tape’s length is not
enough. To program all tracks, use a longer tape.
In step 6, you can check the program data for side A and
side B.
Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished, and
then it is replaced by the number of the first programmed
track for side A.
Shows the total time of programmed tracks for each side.
Shows the programmed track numbers for each side.
CD synchronized recording function can be used if your tape
deck is compatible with it. In this case, in step 7 and 8, press
the SYNCHRO button and then press the PLAY button on
this unit’s remote control transmitter. Recording automatically
begins. (For details, refer to page 17.)
1 2 3 4 5
TOTAL
PROG
4
TRACK PROGRAMMING FOR RECORDING TO TAPE
for CDC-655 only
for CDC-902 only
This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording
time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of
unrecorded space remaining at each end of the tape.
Automatic tape programming
The unit will automatically program tracks on a disc with the original
order of tracks unchanged.
21
TAPE
SYNCHRO
3
INDEX
PROGCLEAR
87 9 0
54 6 +I0
DIMMER TIME
OPEN/
CLOSE
REPEAT RANDOMMODEDISC SCAN
SEARCH
SKIP
OUTPUT LEVEL
–+
STOP PAUSE PLAY
DISC SKIP
2
5
7, 8
8
6
1
4
STOP
6
TAPE
REPEAT
DISC SKIP
(off)
TAPE
19
English
1 Stop the unit.
2 If you will select tracks from a disc (or discs) other than
the disc on the Disc 1 tray, make this unit display the
total recorded time of each disc to be used by pressing
the DISC SKIP button in turn.
* This unit will read the contents of a disc by this
operation. If there is a disc to which this operation is
omitted, tracks on the disc cannot be programmed.
3 Follow step 4 and 5 on page 18.
4
5 If necessary,
select a
desired disc.
6 Select a
desired track.
7 Repeat step 5 and 6 to program more tracks for side A
of the tape. You can select the same track again.
* If “E rr” appears on the display, the track number just
selected cannot be programmed because there is no
enough time remaining on side A of the tape.
8 When you finish the programming for side A, program
the pause mode by pressing the TAPE button.
* “Pu” flashes on the display, and after then you can begin
programming for side B.
9 Follow step 5 and 6.
10 Repeat step 5 and 6 to program more tracks for side
B of the tape.
You can select the same track again.
* If “E rr” appears on the display, the track number just
selected cannot be programmed because there is no
enough time remaining on side B of the tape.
11 The peak level searching function of this unit is
useful for adjusting recording level on the tape deck.
For peak level searching, when the programming for
side B is finished, press the PROG button and then
press the PEAK button on the front panel. (Refer to
page 21.)
12 Begin recording on the tape deck and press the
PLAY button on this unit at the same time.
13 The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and,
at the same time, press the PLAY or PAUSE button
on this unit.
Notes
In step 7 and 10, even if “E rr” appears on the display, you
can program another track of which time is shorter than the
remaining time on the side of the tape. At this time, if any
other track number is flashing continuously on the display,
you can program it.
CD synchronized recording function can be used if your tape
deck is compatible with it.
In this case, in step 12 and 13, press the SYNCHRO button
and then press the PLAY button on this unit’s remote control
transmitter. Recording automatically begins.
(For details, refer to page 17.)
Notes on tape programming
To check, cancel or correct program data, refer to page 15.
The maximum number of tracks that can be programmed is
40. If, however, the PAUSE mode is inserted, it is counted
as one track.
This function can be used to program up to track number 20.
If the disc has more than 20 tracks, track number 21 and
thereafter will not be programmed.
Manual tape programming
This is for recording desired tracks selected
from one or more discs in any desired order onto tape.
21
TAPE
SYNCHRO
3
INDEX
PROGCLEAR
87 9 0
54 6 +I0
DIMMER TIME
OPEN/
CLOSE
REPEAT RANDOMMODEDISC SCAN
SEARCH
SKIP
OUTPUT LEVEL
–+
STOP PAUSE PLAY
DISC SKIP
2, 5
6
12, 13
4, 11
13
1
8
5
TAPE
PROG
DISC SKIP
REMAIN
TOTAL
PROG
STOP
20
Random sequential tape programming
The unit will automatically program tracks on a disc in random sequential order for recording to tape.
Notes
Because the programmed data changes every time the
RANDOM button is pressed, the amount of time remaining
at the end of the tape also changes accordingly.
If the tape’s length is not enough, all tracks cannot be
programmed. In this case, exchange the tape for a longer
one.
In step 2, you can check the program data for side A and
side B.
Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished, and
then it is replaced by the number of the first programmed
track for side A.
Shows the total time of programmed tracks for each side.
Shows the programmed track numbers for each side.
CD synchronized recording function can be used if your tape
deck is compatible with it.
In this case, in step 3 and 4, press the SYNCHRO button
and then press the PLAY button on this unit’s remote control
transmitter. Recording automatically begins.
(For details, refer to page 17.)
1 Follow step 1 – 5 on page 18.
2
* The unit will automatically program tracks for side A and
side B separately considering the tape’s total time.
3 Begin recording on the tape deck and press the PLAY
button on this unit at the same time.
4 The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and,
at the same time, press the PLAY or PAUSE button on
this unit.
Display information during programming
Shows the side of the tape and the program number for the
track to be programmed next.
Shows the selected disc and track number.
Shows the total remaining time on the side of the tape.
Programmed track numbers light up and programmable
track numbers among the unprogrammed ones flash on
and off.
* If “A-01” does not appear on the display after the PROG
button is pressed, press the TIME display mode-select
button.
* If, during programming, the TIME display mode-select button
is pressed, the program number display can be changed to
display the total remaining time on the side of the tape. To
return to the previous display, press the TIME display mode-
select button once again.
21
TAPE
SYNCHRO
3
INDEX
PROGCLEAR
87 9 0
54 6 +I0
DIMMER TIME
OPEN/
CLOSE
REPEAT RANDOMMODEDISC SCAN
SEARCH
SKIP
OUTPUT LEVEL
–+
STOP PAUSE PLAY
DISC SKIP
2
3, 4
4
1 3 5 7
TOTAL
PROG
➀➁
RANDOM
1 2 3 4 5 6 7 8 9 10
REMAIN
TOTAL
PROG
1 2 3 4 5 6 7 8 9 10
REMAIN
TOTAL
PROG
21
English
1 Stop the unit.
2 Select the “1DISC” disc play mode.
3 Select the disc.
4
The peak level search is performed on the disc.
Next, the part where the source level peaks is
repeatedly played. Adjust the recording level on the
tape deck listening to this repeat play.
To cancel this function
Press the STOP button.
Automatic searching for the peak level on a disc
This convenient feature automatically searches a disc for a part where the source level peaks, and next plays the part repeatedly.
For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.
STOP
0
PEAK
8 9 10 11 12
REP
1DISC
8 9 10 11 12
REP
1DISC
10 11 12
SREP
INDEX
REMAIN
TOTAL
PROG
1DISC
Notes
Even if the peak level search is performed twice or more on
the same disc, the same part will not be always selected,
because this unit will search for the peak level among parts
on the disc that are randomly selected by the internal
microcomputer.
In the program play mode, this feature will function among
the programmed tracks only. If program play is being
performed, first press the STOP button, and then press the
PEAK button. If program play is not being performed, only
press the PEAK button.
To search for the peak level through all discs on the disc
tray, in step 2, select the “5DISC” disc play mode.
21
TAPE
SYNCHRO
3
INDEX
PROGCLEAR
87 9 0
54 6 +I0
DIMMER TIME
OPEN/
CLOSE
REPEAT RANDOMMODEDISC SCAN
SEARCH
SKIP
OUTPUT LEVEL
–+
STOP PAUSE PLAY
DISC SKIP
2
3
1
2345
SKIP/SEARCH
456789 0
PLAYXCHANGE
OPEN/CLOSE
OUTPUT LEVEL
PHONES
DISC
PEAK
/
–+
MODE
1DISC
DISC SKIP
(On the front panel)
4
for CDC-902 only
22
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
NOTES ABOUT HANDLING COMPACT DISCS
This compact-disc player is designed only for playing of
compact discs bearing the mark. Never attempt to
load any other type of disc into the unit.
The unit will also play 3-inch (8-cm) compact discs.
To remove a disc from its storage case, open the case and
then press down at the center; with a finger through the
center hole and the outer edges held as shown in the
illustration, lift the disc out carefully.
Always handle the disc with care so that its surface is not
scratched.
Compact discs are not subjected to wear during play, but
damage to the disc surface when the disc is being handled
can adversely affect the disc’s play.
Compact discs are not affected by small particles of dust or
fingerprints on their playing surface, but even so they should
be kept clean. Wipe by using a clean, dry cloth. Do not
wipe with a circular motion; wipe straight outward from the
center.
Do not try to clean the disc's surface by using any type of
disc cleaner, record spray, anti-static spray or liquid, or any
other chemical-based liquid, because such substances
might irreparably damage the disc's surface.
Do not expose discs to direct sunlight, high temperature or
high humidity for a long period of time, because these might
warp or otherwise damage the disc.
To play a 3-inch (8-cm) CD
Place it in the inner recessed area of the disc tray. Do not put
a normal (5-inch/12-cm) CD on top of a 3-inch CD.
Battery installation
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
Use only AA, R6, UM-3 batteries for replacement.
Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
Remove the batteries if the remote control transmitter will
not be used for an extended period of time.
If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
Remote control transmitter operation range
Notes
There should be no large obstacles between the remote
control transmitter and the main unit.
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid
direct lighting.
1
3
2
30°
30°
Remoto control sensor
Within approximately
6 m (19.7 feet)
NO!
CDC-902CDC-502
23
English
AUDIO SECTION
Frequency response .......................... 2 Hz – 20 kHz, ±0.5 dB
Harmonic distortion+noise (1 kHz)
<
CDC-902
>
.................................................. 0.003% or less
<
CDC-502
>
...................................................0.004% or less
S/N ratio
<
CDC-902
>
................................................. 106 dB or more
<
CDC-502
>
..................................................102 dB or more
Dynamic range
<
CDC-902
>
................................................... 96 dB or more
<
CDC-502
>
....................................................95 dB or more
Wow & flutter ................................................... Unmeasurable
Output voltage (1 kHz, 0 dB) .................................... 2.0±0.5V
Headphones output (–20 dB) .............. 200±40 mV/150 ohms
GENERAL
Power requirements
U.S.A. and Canada models ............................ 120V, 60 Hz
Australia model .............................................. 240V, 50 Hz
Europe and U.K. models..................................230V, 50 Hz
General model ...................... 110/120/220/240V, 50/60 Hz
Power consumption ........................................................ 20W
Dimensions (W x H x D) ......................... 435 x 116 x 388 mm
(17-1/8” x 4-9/16” x 15-1/4”)
Weight .................................................... 5.8 kg (12 lbs. 12 oz.)
Accessories .................................................. Connection cord
Remote control transmitter
Batteries (size AA, R6,UM-3)
Please note that all specifications are subject to change
without notice.
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple
measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit’s power cord and
contact your authorized YAMAHA dealer or service center for help.
SYMPTOM
This unit does not switch ON when the
POWER switch is pressed.
The disc tray does not close completely.
A disc number does not light up on the
display.
Play does not begin.
Play is delayed, or begins at the wrong
place.
No sound.
Sound “skips”.
Sound “hums”.
Noise from a nearby tuner.
Noise from inside of the disc tray.
The remote control transmitter does not
work.
PROBABLE CAUSE
The power cord is not connected or not completely
connected.
A foreign object is obstructing the tray.
The disc has been loaded upside down.
The disc is damaged.
There is moisture on the laser pickup.
The disc has been loaded upside down.
The disc is dirty.
The disc may be scratched or damaged.
Improper output cable connections.
Improper amplifier operation.
This unit is being subjected to vibrations or
impacts.
The disc is dirty.
Improper cable connections.
The tuner is too close to this unit.
The disc may be warped.
The batteries of this remote control transmitter are too
weak.
Direct sunlight or lighting (of an inverter type of
fluorescent lamp etc.) is striking the remote control
sensor of the main unit.
REMEDY
Securely connect the power cord.
Carefully check the disc tray and remove the foreign
object.
Reload the disc with the label side up.
Check the disc carefully; replace it if necessary.
Wait 20 to 30 minutes after switching the unit ON
before trying to play a disc.
Reload the disc with the label side up.
Clean the disc.
Check the disc carefully; replace it if necessary.
Connect the cables properly. If the problem persists,
the cables may be defective.
Set the amplifier controls to the correct input selection.
Relocate this unit.
Clean the disc.
Securely connect the audio cables. If the problem
persists, the cables may be defective.
Move the tuner and this unit farther apart.
Replace the disc.
Replace the batteries with new ones.
Change position of the main unit.
SPECIFICATIONS
YAMAHA ELECTRONICS CORPORATION, USA6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD.135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H.SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A.RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD.YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B.J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD.17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VV36110

Documenttranscriptie

CDC-902/502 Natural Sound Compact Disc Player Lecteur de disque audionumérique de la série “Natural Sound” Thank you for selecting this YAMAHA Compact Disc Player. Nous vous remercions d’avoir porté votre choix sur ce lecteur de disque audionumérique YAMAHA. OWNER’S MANUAL MODE D’EMPLOI CONTENTS TABLE DES MATIERES Safety Instructions.................................................. 2 Features ................................................................. 4 Connections ........................................................... 5 Identification of Components ................................. 6 Basic Operation ..................................................... 8 Random-Sequence Play ...................................... 13 Program Play ....................................................... 14 Repeat Play.......................................................... 16 Index Search ........................................................ 16 CD Synchronized Recording.................................17 Track Programming for Recording to Tape for CDC-902 only ............................................. 18 Notes about the Remote Control Transmitter ........................................................... 22 Notes about Handling Compact Discs ................. 22 Troubleshooting.................................................... 23 Specifications....................................................... 23 Caractéristiques .................................................. 24 Attention ............................................................. 25 Connexions ......................................................... 26 Identification des composants ............................ 27 Fonctionnement de base .................................... 29 Lecture en séquence aléatoire ........................... 34 Lecture programmée .......................................... 35 Lecture repetée .................................................. 37 Recherche d’index .............................................. 37 Enregistrement synchronise d’un disque audionumérique ........................................38 Programmation des plages pour enregistrement sur bande CDC-902 seulement ........................................ 39 Remarques concernant la télécommande .......... 43 Remarques concernant la manipulation des disques .... 43 Dépistage de pannes .......................................... 44 Caractéristiques techniques ............................... 44 SAFETY INSTRUCTIONS 9 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Heat – The unit should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat. 10 Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 11 Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. 12 Cleaning – The unit should be cleaned only as recommended by the manufacturer. 13 Nonuse Periods – The power cord of the unit should be unplugged from the outlet when left unused for a long period of time. 14 Object and Liquid Entry – Care should be taken so that objects do not fall into and liquids are not spilled into the inside of the unit. 15 Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. damaged; or B. Objects have fallen, or liquid has been spilled into the unit; or C. The unit has been exposed to rain; or 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. D. The unit does not appear to operate normally or 2 Retain Instructions – The safety and operating instructions should be retained for future reference. E. The unit has been dropped, or the cabinet damaged. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 4 Follow Instructions – All operating and other instructions should be followed. 5 Water and Moisture – The unit should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. 6 Carts and Stands – The unit should be used only with a cart or stand that is recommended by the manufacturer. 6A A unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn. 2 7 Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. 8 Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. exhibits a marked change in performance; or 16 Servicing – The user should not attempt to service the unit beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel. 17 Power Lines – An outdoor antenna should be located away from power lines. 18 Grounding or Polarization – Precautions should be taken so that the grounding or polarization is not defeated. IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to rain and water. 3 Do not operate the unit upside-down. It may overheat, possibly causing damage. 4 Never open the cabinet. If a foreign object drops into the set, contact your dealer. 5 Do not use force on switches, knobs or cords. When moving the set, first turn the unit off. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself. 9 English CAUTION: READ THIS BEFORE OPERATING YOUR UNIT To prevent damage by lightning, disconnect the power cord from the household AC outlet during an electrical storm. 10 When disconnecting the power cord from the household AC outlet, grasp the plug; do not pull the cord. 11 When moving the unit, be sure to first disconnect the power cord from the household AC outlet, and disconnect cords connected to other equipment. CAUTION FOR CARRYING THIS UNIT Be sure not to carry or tip this unit with discs remaining in it. CAUTION FOR MOVING THIS UNIT When moving this unit, first remove all discs from the disc tray and close the tray by pressing the OPEN/CLOSE button. After you confirm that the display lights up as shown below, switch off the power by pressing the POWER switch, and then disconnect the power plug from the AC outlet. 6 Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 7 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that your unit is faulty. 8 Do not place another component on top of this unit, because to do so will discolor or damage the surface of the unit. Never switch off the power untill the display lights up as above, otherwise this unit will break down during moving because the internal mechanism is not locked. WARNING CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only. DANGER Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. DANGER: The use of optical instrument with this product will increase eye hazard. Laser Diode Properties • Material: GaAlAs • Wavelength: 780nm • Emission Duration: continuous • Laser Output: max. 44.6µW* * This output is the value measured at a distance of about 200mm from the objective lens surface on the Optical Pickup Block. To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only. The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off. We Want You Listening For A Lifetime (for US customers only) YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. 3 FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. Relocate either this product or the device that is being affected by the interference. 3. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. CAUTION (FOR CANADA MODEL) TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. FOR CANADIAN CUSTOMER THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCECAUSING EQUIPMENT REGULATIONS. FEATURES 4 ● 5-Disc Carousel Auto-changer ● Remote Control Capability ● Full Opening Disc Tray for Changing 5 Discs at a Time ● Disc Scanning Capability Useful for Disc Searching or Disc Checking ● PLAYXCHANGE; Disc Changing Capability while Playing Another ● CD Synchronized Recording with a Compatible YAMAHA Tape Deck ● Random Access Programmable Play ● Random-Sequence Play CDC-902 only ● Automatic Programming for Recording to Tape ● Single Track/Entire Disc/All Disc Repeat Play ● Automatic Peak Level Searching Capability ● Adjustable Display Brightness ● Optical Digital Output ● ● Before making any connections, switch OFF the power to the unit and the amplifier or other component. Connections should be made to the correct input terminals of the amplifier or other component. If the placement of this unit causes noise to other equipment, such as a tuner, separate them from each other. ● CDC-502 LINE OUT English CONNECTIONS CDC-902 LINE OUT DIGITAL AUDIO OUT OPTICAL To AC outlet To AC outlet ➋ Optical fiber cable (not included) ➊ Connection cord (included) ➊ Connection cord (included) Amplifier OPTICAL CD DIGITAL IN Choose one of the ways listed below to connect this unit to your amplifier. When the LINE OUT (analog) terminals of this unit are used ( ➊ ) ● ● ● Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component. Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, refer to the operation instructions for the amplifier being used. CDC-902 only Adjust the level of signals output into an amplifier, etc. by using the OUTPUT LEVEL button. CDC-902 only When the DIGITAL AUDIO OUT (OPTICAL) terminal of this unit is used ( ➋ ) ● ● ● ● ● Before using this terminal, remove the terminal’s cover by pulling it. Make the connection from this terminal to the optical input terminal of an amplifier by using a commercially available optical fiber cable. * Use an optical fiber cable that conforms to EIAJ standards. Other cables might not function correctly. Be sure to attach the terminal’s cover when this terminal is not being used, in order to protect the terminal from dust. Set the level of signals output into an amplifier to max. by using the OUTPUT LEVEL button. This terminal can also be connected to the optical input terminal of a digital audio tape deck (DAT) etc. to record CD onto tape directly. 5 IDENTIFICATION OF COMPONENTS * ( ) indicates the page number on which the control and its function are best described. FRONT PANEL * The control functions on the main unit and on the remote control transmitter are virtually identical, with the exceptions below. * The (PLAY/PAUSE) button on the main unit has both the functions of the PLAY button and the PAUSE button on the remote control transmitter. * The SKIP/SEARCH buttons on the main unit have both the functions of the SKIP button and the SEARCH button on the remote control transmitter. CDC-902 POWER switch (p. 8) PLAYXCHANGE button (p. 9) Disc tray (p. 8) DISC-select buttons (p. 8) NATURAL SOUND COMPACT DISC PLAYER / OPEN/CLOSE PLAYXCHANGE AUTO DISPLAY OFF FILE/ SAVE PROG +10 1 1 DISC 3 2 4 5 SKIP/SEARCH POWER PHONES 2 3 4 5 6 7 8 9 0 PEAK Display panel OUTPUT LEVEL – + PEAK button (p. 21) Remote control sensor (p. 22) PHONES jack (p. 12) CDC-502 POWER switch (p. 8) PLAYXCHANGE button (p. 9) Disc tray (p. 8) DISC-select buttons (p. 8) NATURAL SOUND COMPACT DISC PLAYER / OPEN/CLOSE PLAYXCHANGE POWER 1 Display panel 6 2 DISC 3 4 Remote control sensor (p. 22) 5 SKIP/SEARCH English * ( ) indicates the page number on which the control button is best described. REMOTE CONTROL TRANSMITTER CDC-902 only TAPE button (p. 18) DIMMER button (p. 12) TIME display mode-select button (p. 11) SYNCHRO DIMMER TIME OPEN/ CLOSE TAPE CLEAR PROG SYNCHRO button (p. 17) OPEN/CLOSE button (p. 8) PROG button (p. 14) Numeric buttons (p. 10) Disc play MODE-select button (p. 8) 1 2 3 4 5 6 +10 7 8 9 0 DISC SCAN MODE REPEAT RANDOM INDEX INDEX button (p. 16) REPEAT button (p. 16) DISC SCAN button (p. 11) RANDOM button (p. 13) DISC SKIP SEARCH SEARCH button (p. 10) DISC SKIP button (p. 8) – CDC-902 only OUTPUT LEVEL button (p. 12) CLEAR button (p. 15) OUTPUT LEVEL + SKIP SKIP button (p. 10) STOP PAUSE PLAY PLAY button (p. 8) STOP button (p. 9) PAUSE button (p. 9) Parts in the shaded areas are provided for CDC-902 only. 7 This manual describes how to operate this unit by using the remote control transmitter. To operate this unit on the front panel, use the corresponding buttons on the front panel. BASIC OPERATION CDC-902 SYNCHRO 4 5 POWER DIMMER TIME OPEN/ CLOSE TAPE CLEAR PROG CDC-502 2, 3 DIMMER TIME OPEN/ CLOSE CLEAR PROG 1 2 3 INDEX 1 2 3 4 5 6 +I0 4 5 6 7 8 9 0 7 8 9 0 DISC SCAN MODE REPEAT RANDOM DISC SCAN MODE REPEAT RANDOM OUTPUT LEVEL 4 5 SEARCH DISC SKIP – STOP + PAUSE SKIP 5 PLAY 1 1 SYNCHRO 4 Turn the power on. 2, 3 INDEX +I0 SEARCH DISC SKIP SKIP STOP PAUSE PLAY 5 Select a desired disc play mode (1DISC or 5DISC) confirming it on the display. POWER 1DISC 5DISC MODE Shows the selected disc mode. 2 Open the disc tray and load discs. OPEN/ CLOSE “1DISC” mode: The unit will play a designated disc only. “5DISC” mode: The unit will play all discs on the tray in sequence. Label side upward 5 Start play from the first track of the disc 1. PLAY Disc tray 3 Close the disc tray * If necessary, select a desired disc by using the DISC SKIP button or a DISC-select button. OPEN/ CLOSE DISC SKIP 2 DISC 3 PLAY (On the front panel) To turn off the power Press the POWER switch again. 8 4 English Notes ● After closing the disc tray by pressing the OPEN/CLOSE button when this unit is stopped or after selecting any disc by using the DISC SKIP button when this unit is stopped, the display shows the total number of tracks and the total recorded time of the selected disc for a few seconds. Display information at disc play ➁ ➂ ➀ ➃ 5DISC REMAIN 5DISC 3 4 5 6 7 8 9 10 11 12 TOTAL 1 2 3 4 5 6 7 8 9 10 11 12 ● Additionally, you can close the disc tray by pressing the PLAY ( ) button, a DISC-select button on the front panel, a numeric button or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the first selected disc. ➄ ➀ ➁ ➂ ➃ PLAYXCHANGE During play, you can open the disc tray by pressing the PLAYXCHANGE button on the front panel without interrupting disc play. However, in this case, pressing the DISC SKIP button has no effect. ➄ ➅ To stop play temporarily PAUSE ➅ Encloses the tray number of the selected disc. Lights up the tray numbers with discs only. * All tray numbers light up when the power turns on, and whenever the disc tray rotates to change a disc selected, a tray number with no disc goes off. Shows the selected track number. Shows the time displays. (Refer to “Selecting time displays” on page 11.) Displays the numbers that correspond to the numbers of the tracks (as high as number 20) on the selected disc. After each track is played, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance. CDC-902 only Shows the level of signals output into an amplifier or the headphone level adjusted by using the OUTPUT LEVEL button. To stop play completely STOP or or (On the front panel) (On the front panel) To resume play, press the PAUSE button again (or press the PLAY button). * The (PLAY/PAUSE) button on the front panel can also be used to stop play temporarily or to resume play. 9 To play a desired track on the disc DIRECT PLAY SKIP PLAY Select a desired track by using the numeric buttons. To play from the beginning of the track following the one now playing 5 SKIP To play from the beginning of the track now playing 1DISC SKIP The selected track number is displayed. 5 6 7 8 9 10 11 12 Example: To select track 25 Press ➀ twice, then immediately press ➁ once. +10 To play from the beginning of the track before the one now playing 5 SKIP ➀ ➁ (Twice) ● * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played. ● ● These operations can also be performed when the unit is paused or stopped. When using the SKIP button on the remote control transmitter: If the button is pressed and held, the track number is continuously changed to higher numbers (or lower numbers). When using the SKIP/SEARCH buttons on the front panel: Be careful not to press and hold a button, otherwise the selected track is played forward (or backward) rapidly. To advance or reverse play rapidly (MANUAL SEARCH) To advance rapidly ● SEARCH ● (Press and hold.) To reverse rapidly SEARCH (Press and hold.) 10 ● The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. Manual search can also be performed while disc play is paused, though no sound will be heard. When using the SKIP/SEARCH buttons on the front panel: Be careful not to release the button just after it is pressed, otherwise the play is skipped to the beginning of the next track or returned to the beginning of the current track. English Scanning discs to search for a desired disc (or to check discs on the disc tray) When the DISC SCAN button is pressed when this unit is stopped, this unit will play an initial part of each disc in turn. Each disc is played for 8 seconds. If, during this play, you find a disc that you want to listen to, press the DISC SCAN button once again or press the PLAY button to cancel this function. The unit will enter into the normal play mode. Notes During this play, the disc tray numbers flash on and off on the display. Every time the play of a disc is finished, the corresponding tray number is changed from flashing to lighting. ● DISC SCAN ● There might be cases that you will hear no sound during disc scan. An example of this would be if the disc being played has a long blank space between tracks. Selecting time displays You can select any of the four time displays by pressing the TIME display mode-select button. ➀ ➃ Elapsed time of the track now playing 5DISC Total remaining time on the disc 5DISC TOTAL REMAIN 2 3 4 5 6 7 8 9 10 11 12 2 3 4 5 6 7 8 9 10 11 12 TIME ➁ Remaining time of the track now playing 5DISC ➂ Total disc play time 5DISC TOTAL REMAIN 2 3 4 5 6 7 8 9 10 11 12 2 3 4 5 6 7 8 9 10 11 12 Note The remaining time ➁ will not be displayed if the track number is 21 or higher. 11 Changing brightness of the display If desired, you can change brightness of the display in three degrees by pressing the DIMMER button. Normal illumination DIMMER Slightly dim Dim CDC-902 only CDC-902 only Adjusting the level of signals output into an amplifier, etc. You can adjust the level of sound signals output from the LINE OUT terminals on the rear panel into an amplifier, etc. as you prefer by using the OUTPUT LEVEL button. – OUTPUT LEVEL Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL button. * Note that the use of the OUTPUT LEVEL button will also vary the level of the signal output to an amplifier, etc. OUTPUT LEVEL + or – + (On the front panel) * When the DIGITAL AUDIO OUT (OPTICAL) terminal is used for the connection, set the level of output signals to max. * The level of output signals can be checked on the display. 12 When you listen with headphones PHONES English RANDOM-SEQUENCE PLAY You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or a designated disc on the disc tray. CDC-902 SYNCHRO 3 DISC SKIP TIME OPEN/ CLOSE TAPE CLEAR PROG 2 SYNCHRO DIMMER TIME OPEN/ CLOSE CLEAR PROG 1 2 3 INDEX 1 2 3 4 5 6 +I0 4 5 6 7 8 9 0 7 8 9 0 DISC SCAN MODE REPEAT RANDOM DISC SCAN MODE REPEAT RANDOM SEARCH DISC SKIP – OUTPUT LEVEL STOP 1 DIMMER CDC-502 + PAUSE 3 4 DISC SKIP SKIP PLAY 3 +I0 4 SKIP STOP Load one or more discs. INDEX SEARCH DISC SKIP 2 PAUSE PLAY Select a desired disc play mode (1DISC or 5DISC). MODE * If you select “1DISC” mode, next select a desired disc by using the DISC SKIP button on the remote control transmitter or a DISC-select button on the front panel. 2 4 Close the disc tray. RANDOM OPEN/ CLOSE “RNDM” lights up on the display. To cancel random-sequence play Press the STOP button or RANDOM button once again, or open the disc tray by pressing the OPEN/CLOSE button. “RNDM” disappears from the display. Notes ● This feature will not function during programming, or during program play. ● ● ● If the SKIP button is pressed during random-sequence play, the next randomly programmed track will be played. If the SKIP button is pressed, play will return to the beginning of the track now being played. This indication appears while the unit is mixing up tracks. Total remaining time on the disc will not be displayed during random-sequence play. 13 PROGRAM PLAY You can enjoy listening to your favorite tracks selected from one or more discs in any desired order by programming tracks. CDC-902 SYNCHRO 5 2, 4 1 1 DIMMER TIME OPEN/ CLOSE TAPE CLEAR PROG 1 2 3 4 5 6 +I0 7 8 9 0 DISC SCAN MODE REPEAT RANDOM OUTPUT LEVEL STOP SYNCHRO 3 + 5 2, 4 1 SKIP PAUSE PLAY 7 4 Stop the unit. DIMMER OPEN/ CLOSE TIME CLEAR SEARCH DISC SKIP – INDEX CDC-502 1 2 3 4 5 6 PROG INDEX 3 +I0 7 8 9 0 DISC SCAN MODE REPEAT RANDOM SEARCH DISC SKIP SKIP STOP PAUSE PLAY 7 If necessary, select a desired disc. STOP DISC 3 2 DISC SKIP 4 or (On the front panel) 2 If you will select tracks from a disc (or discs) other than the disc on the Disc 1 tray, make this unit display the total recorded time of each disc to be used by pressing the DISC SKIP button in turn. * Without this operation, the total time of the programmed tracks will not be displayed during programming. 5 Program a desired track by pressing the corresponding numeric button. 5 DISC SKIP 6 3 Repeat steps 4 – 5 to program more tracks. You can select the same track again. Press the PROG button to begin programming. 7 When the programming is completed; PROG PROG TOTAL 14 PLAY Notes You can program as many as 40 tracks at one time. ● You can program a whole disc by pressing “0”, instead of one track. At that time, “AL” flashes on the display. ● The total time of the programmed tracks will not be displayed, if a track number higher than 20 is programmed. ● If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks or no information. To return to the previous display, press the TIME display mode-select button once again. ● The SKIP ( and ) button can be used during playing, but only within the range of the programmed tracks. ● The SEARCH ( and ) button can be used during playing to search all tracks, including unprogrammed tracks. ● PROG TOTAL ➁ ➂ ➀ PROG TOTAL 6 English Display information during programming ➃ ➀ ➁ ➂ ➃ Shows the program number for the track to be programmed next. Shows the selected disc and track number. Shows the total time of the tracks currently programmed. Shows only the numbers of programmed tracks on the selected disc. * If “P-01” does not appear on the display after the PROG button is pressed, press the TIME display mode-select button. * If the total time exceeds 99 minutes and 59 seconds, the time will not be displayed. To stop program play To check program data Press the STOP button. The first programmed track number will be displayed. To resume play, press the PLAY button. Play will begin from the beginning of the program. 1. If during program play, press the STOP button. 2. Press the PROG button. 3. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. To cancel a programmed sequence There are several methods, as described below. ● Press the STOP button or the CLEAR button while the unit is stopped. ● Open the disc tray. ● Switch off the power. To correct program data 1. Follow the procedure described in “To check program data”. 2. Display the track number to be corrected by pressing the SKIP button. 3. Press a numeric button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. 4. After the correction has been completed, press the PROG button or PLAY button once again. 15 REPEAT PLAY You can play any desired track or disc (or a set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. SINGLE REPEAT (REP S) A single track is repeatedly played. * This is also available in the program play mode and the random-sequence play mode. (If the repeat play mode is switched off, the program play mode or the randomsequence play mode will be resumed.) (OFF) REPEAT FULL REPEAT (REP F) REP S In the “1DISC” disc play mode: A designated disc is played repeatedly played. In the “5DISC” disc play mode: All discs on the disc tray are repeatedly played. REP F * In the program play mode, all programmed tracks are repeatedly played. * In the random-sequence play mode, all randomly sequenced tracks are repeatedly played in the same order. INDEX SEARCH If the disc includes index numbers, play can be started from any desired index number. 1 To cancel the index search function Press the INDEX button. Select a track which has index numbers. 5 2 INDEX INDEX 6 7 8 9 10 11 12 3 Select the desired index number. 3 INDEX 6 7 8 9 10 11 12 16 Notes ● Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if such index numbers are included. ● If an index number is selected that is higher than any index number on that disc, play will start from the last index number point on the disc. ● For some discs, play may begin slightly prior to the actual designated index point. ● If the disc has no encoded index points, play will begin from the start of the selected track. ● The index number can be designated only while “INDEX” is illuminated on the display. This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely. This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote control transmitter at the same time. CDC-902 3 4 1 SYNCHRO TIME OPEN/ CLOSE TAPE CLEAR PROG 1 2 3 4 5 6 +I0 7 8 9 0 DISC SCAN MODE REPEAT RANDOM OUTPUT LEVEL CDC-502 3 + PAUSE SYNCHRO DIMMER SKIP PLAY 4 2 3 4 5 6 7 8 9 0 DISC SCAN MODE REPEAT RANDOM INDEX +I0 SEARCH DISC SKIP SKIP STOP 4 Select a disc. PROG 1 1 4 5 OPEN/ CLOSE TIME CLEAR INDEX SEARCH DISC SKIP – STOP 1 DIMMER English CD SYNCHRONIZED RECORDING PAUSE PLAY 4 5 If desired, select the track to be recorded first. 5 SKIP DISC SKIP or 2 Load a tape on the tape deck. * CDC-902 only The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) 5 PLAY Both CD play and tape deck recording begin. * CD play begins a little later than recording. 3 SYNCHRO 6 This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit flashes on and off. If you want to stop recording temporarily and restart recording from a desired track, follow steps 3–5 again. To cancel this function Press the STOP button. Notes ● To finish or stop the recording, press the “STOP” button on the tape deck. ● Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 14–15 for the programming procedure.) ● CDC-902 only This function can also be used together with the automatic tape-programming function. (Refer to page 18–20.) 17 TRACK PROGRAMMING FOR RECORDING TO TAPE CDC-655 only for CDC-902 This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. SYNCHRO ■ Automatic tape programming 4 5 The unit will automatically program tracks on a disc with the original order of tracks unchanged. 2 1 1 Stop the unit. 6 STOP DIMMER TIME TAPE CLEAR OPEN/ CLOSE PROG 1 2 3 4 5 6 7 8 9 0 DISC SCAN MODE REPEAT RANDOM OUTPUT LEVEL STOP +I0 6 8 7, 8 SEARCH DISC SKIP – INDEX + SKIP PAUSE PLAY Press the REPEAT button. REPEAT 2 Select the disc. The unit automatically programs tracks for side A and side B separately considering the tape’s total time. DISC SKIP 7 3 4 8 The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) Begin recording on the tape deck and press the PLAY button on this unit at the same time. The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. Enter the tape’s total possible recording time (tape length). Notes ● All tracks may not be programmed if the tape’s length is not enough. To program all tracks, use a longer tape. ● In step 6, you can check the program data for side A and side B. TAPE ➁ ➀ You can select any of four tape lengths by pressing the TAPE button. PROG TOTAL 1 2 3 4 5 TAPE ➂ (off) ➀ 5 18 Otherwise, you can also enter the tape’s total possible recording time manually. Example: For a C-64 tape (32 minutes on each side) 6 4 ➀ ➁ ➁ ➂ ● Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. Shows the total time of programmed tracks for each side. Shows the programmed track numbers for each side. CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 7 and 8, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 17.) English ■ Manual tape programming SYNCHRO This is for recording desired tracks selected from one or more discs in any desired order onto tape. 8 6 2, 5 1 1 Stop the unit. 9 STOP 3 11 Follow step 4 and 5 on page 18. PROG 12 PROG TOTAL REMAIN 5 6 7 13 If necessary, select a desired disc. DISC SKIP Select a desired track. 5 1 2 3 4 5 6 OPEN/ CLOSE PROG INDEX 7 8 9 0 DISC SCAN MODE REPEAT RANDOM SEARCH DISC SKIP – OUTPUT LEVEL STOP + PAUSE 4, 11 +I0 SKIP PLAY 13 12, 13 Repeat step 5 and 6 to program more tracks for side B of the tape. You can select the same track again. The peak level searching function of this unit is useful for adjusting recording level on the tape deck. For peak level searching, when the programming for side B is finished, press the PROG button and then press the PEAK button on the front panel. (Refer to page 21.) Begin recording on the tape deck and press the PLAY button on this unit at the same time. The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. Notes In step 7 and 10, even if “E rr” appears on the display, you can program another track of which time is shorter than the remaining time on the side of the tape. At this time, if any other track number is flashing continuously on the display, you can program it. ● CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 12 and 13, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 17.) ● Repeat step 5 and 6 to program more tracks for side A of the tape. You can select the same track again. * If “E rr” appears on the display, the track number just selected cannot be programmed because there is no enough time remaining on side A of the tape. 8 CLEAR * If “E rr” appears on the display, the track number just selected cannot be programmed because there is no enough time remaining on side B of the tape. If you will select tracks from a disc (or discs) other than the disc on the Disc 1 tray, make this unit display the total recorded time of each disc to be used by pressing the DISC SKIP button in turn. * This unit will read the contents of a disc by this operation. If there is a disc to which this operation is omitted, tracks on the disc cannot be programmed. 4 TIME TAPE Follow step 5 and 6. 10 2 DIMMER When you finish the programming for side A, program the pause mode by pressing the TAPE button. TAPE * “Pu” flashes on the display, and after then you can begin programming for side B. Notes on tape programming To check, cancel or correct program data, refer to page 15. ● The maximum number of tracks that can be programmed is 40. If, however, the PAUSE mode is inserted, it is counted as one track. ● This function can be used to program up to track number 20. If the disc has more than 20 tracks, track number 21 and thereafter will not be programmed. ● 19 ➀ Display information during programming Shows the side of the tape and the program number for the track to be programmed next. Shows the selected disc and track number. Shows the total remaining time on the side of the tape. Programmed track numbers light up and programmable track numbers among the unprogrammed ones flash on and off. ➁ ➂ ➃ PROG TOTAL REMAIN 1 2 3 4 5 6 7 8 9 10 ➀ * If “A-01” does not appear on the display after the PROG button is pressed, press the TIME display mode-select button. ➂ ➁ * If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total remaining time on the side of the tape. To return to the previous display, press the TIME display modeselect button once again. PROG TOTAL REMAIN 1 2 3 4 5 6 7 8 9 10 ➃ ■ Random sequential tape programming The unit will automatically program tracks on a disc in random sequential order for recording to tape. SYNCHRO DIMMER TIME TAPE CLEAR PROG 1 2 3 4 5 6 7 8 9 0 DISC SCAN MODE REPEAT RANDOM 4 – OUTPUT LEVEL Follow step 1 – 5 on page 18. 2 RANDOM STOP INDEX +I0 2 SEARCH DISC SKIP 1 OPEN/ CLOSE + PAUSE SKIP PLAY 3, 4 Notes ● Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly. ● If the tape’s length is not enough, all tracks cannot be programmed. In this case, exchange the tape for a longer one. ● In step 2, you can check the program data for side A and side B. ➀ * The unit will automatically program tracks for side A and side B separately considering the tape’s total time. 3 4 PROG TOTAL 1 Begin recording on the tape deck and press the PLAY button on this unit at the same time. ➁ ➂ ● 20 3 5 7 ➂ ➀ The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. ➁ Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. Shows the total time of programmed tracks for each side. Shows the programmed track numbers for each side. CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 3 and 4, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 17.) English Automatic searching for the peak level on a disc for CDC-902 only This convenient feature automatically searches a disc for a part where the source level peaks, and next plays the part repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck. SYNCHRO DIMMER OPEN/ CLOSE TIME TAPE CLEAR PROG / 2 3 1 1 1 2 3 4 5 6 PLAYXCHANGE +I0 7 8 9 0 DISC SCAN MODE REPEAT RANDOM DISC 3 2 – OUTPUT LEVEL STOP 4 5 5 6 7 8 9 0 SEARCH + SKIP/SEARCH PHONES 4 DISC SKIP OPEN/CLOSE INDEX PEAK OUTPUT LEVEL – + SKIP PAUSE PLAY 4 4 Stop the unit. 0 PEAK STOP (On the front panel) 2 1DISC Select the “1DISC” disc play mode. PROG INDEX TOTAL REMAIN REP S 10 11 12 MODE The peak level search is performed on the disc. 1DISC 3 Select the disc. 1DISC DISC SKIP REP 8 9 10 11 12 1DISC REP 8 9 10 11 12 Next, the part where the source level peaks is repeatedly played. Adjust the recording level on the tape deck listening to this repeat play. To cancel this function Press the STOP button. Notes • Even if the peak level search is performed twice or more on the same disc, the same part will not be always selected, because this unit will search for the peak level among parts on the disc that are randomly selected by the internal microcomputer. • • In the program play mode, this feature will function among the programmed tracks only. If program play is being performed, first press the STOP button, and then press the PEAK button. If program play is not being performed, only press the PEAK button. To search for the peak level through all discs on the disc tray, in step 2, select the “5DISC” disc play mode. 21 NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range CDC-502 CDC-902 2 Remoto control sensor 1 3 Within approximately 6 m (19.7 feet) Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement. ● Be sure the polarities are correct. (See the illustration inside the battery compartment.) ● Remove the batteries if the remote control transmitter will not be used for an extended period of time. ● If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. 30° 30° Notes ● There should be no large obstacles between the remote control transmitter and the main unit. ● If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting. NOTES ABOUT HANDLING COMPACT DISCS ● This compact-disc player is designed only for playing of compact discs bearing the mark. Never attempt to load any other type of disc into the unit. The unit will also play 3-inch (8-cm) compact discs. ● To remove a disc from its storage case, open the case and then press down at the center; with a finger through the center hole and the outer edges held as shown in the illustration, lift the disc out carefully. ● ● Compact discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center. ,,, , , ● Do not try to clean the disc's surface by using any type of disc cleaner, record spray, anti-static spray or liquid, or any other chemical-based liquid, because such substances might irreparably damage the disc's surface. ● Do not expose discs to direct sunlight, high temperature or high humidity for a long period of time, because these might warp or otherwise damage the disc. Always handle the disc with care so that its surface is not scratched. NO! ● Compact discs are not subjected to wear during play, but damage to the disc surface when the disc is being handled can adversely affect the disc’s play. To play a 3-inch (8-cm) CD Place it in the inner recessed area of the disc tray. Do not put a normal (5-inch/12-cm) CD on top of a 3-inch CD. 22 If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit’s power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM REMEDY PROBABLE CAUSE This unit does not switch ON when the POWER switch is pressed. The power cord is not connected or not completely connected. Securely connect the power cord. The disc tray does not close completely. A foreign object is obstructing the tray. Carefully check the disc tray and remove the foreign object. A disc number does not light up on the display. The disc has been loaded upside down. Reload the disc with the label side up. The disc is damaged. Check the disc carefully; replace it if necessary. There is moisture on the laser pickup. Wait 20 to 30 minutes after switching the unit ON before trying to play a disc. The disc has been loaded upside down. Reload the disc with the label side up. The disc is dirty. Clean the disc. Play is delayed, or begins at the wrong place. The disc may be scratched or damaged. Check the disc carefully; replace it if necessary. No sound. Improper output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. Improper amplifier operation. Set the amplifier controls to the correct input selection. This unit is being subjected to vibrations or impacts. Relocate this unit. Play does not begin. Sound “skips”. English TROUBLESHOOTING The disc is dirty. Clean the disc. Sound “hums”. Improper cable connections. Securely connect the audio cables. If the problem persists, the cables may be defective. Noise from a nearby tuner. The tuner is too close to this unit. Move the tuner and this unit farther apart. Noise from inside of the disc tray. The disc may be warped. Replace the disc. The remote control transmitter does not work. The batteries of this remote control transmitter are too weak. Replace the batteries with new ones. Direct sunlight or lighting (of an inverter type of fluorescent lamp etc.) is striking the remote control sensor of the main unit. Change position of the main unit. SPECIFICATIONS AUDIO SECTION GENERAL Frequency response .......................... 2 Hz – 20 kHz, ±0.5 dB Harmonic distortion+noise (1 kHz) <CDC-902> .................................................. 0.003% or less <CDC-502> ...................................................0.004% or less S/N ratio <CDC-902> ................................................. 106 dB or more <CDC-502> ..................................................102 dB or more Dynamic range <CDC-902> ................................................... 96 dB or more <CDC-502> ....................................................95 dB or more Wow & flutter ................................................... Unmeasurable Output voltage (1 kHz, 0 dB) .................................... 2.0±0.5V Headphones output (–20 dB) .............. 200±40 mV/150 ohms Power requirements U.S.A. and Canada models ............................ 120V, 60 Hz Australia model .............................................. 240V, 50 Hz Europe and U.K. models ..................................230V, 50 Hz General model ...................... 110/120/220/240V, 50/60 Hz Power consumption ........................................................ 20W Dimensions (W x H x D) ......................... 435 x 116 x 388 mm (17-1/8” x 4-9/16” x 15-1/4”) Weight .................................................... 5.8 kg (12 lbs. 12 oz.) Accessories .................................................. Connection cord Remote control transmitter Batteries (size AA, R6,UM-3) Please note that all specifications are subject to change without notice. 23 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA VV36110
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Yamaha CDC-902 Handleiding

Categorie
CD spelers
Type
Handleiding
Deze handleiding is ook geschikt voor