Documenttranscriptie

CDC-845/745 Natural Sound Compact Disc Player 5-Disc Carousel Auto-Changer PLAYXCHANGE; Disc Changing Capability while Playing Another Random Access Programmable Play Random-Sequence Play Single Track/Entire Disc/All Disc Repeat Play Automatic Tape-Programming Automatic Peak Level Searching Capability Program Data Filing Capability Disc Scanning Capability Useful for Disc Searching or Disc Checking Display Brightness Changing Capability CD Synchronized Recording with a Compatible YAMAHA Tape Deck Optical Digital Output Remote Control Capability Thank you for selecting this YAMAHA Compact Disc Player. OWNER’S MANUAL CONTENTS Safety Instructions.................... 2 Connections ............................. 4 Identification of Components.... 5 Loading Discs/Disc Play........... 7 Random-Sequence Play ........ 11 Program Play.......................... 12 Repeat Play............................ 16 Index Search .......................... 16 Track Programming for Recording to Tape ...................17 CD Synchronized Recording ...21 Notes about the Remote Control Transmitter ................. 22 Notes about Handling Compact Discs ....................... 22 Troubleshooting ...................... 23 Specifications ......................... 23 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT! Please record the serial number of this unit in the space below. • Explanation of Graphical Symbols Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.  SAFETY INSTRUCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 11 Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 12 Cleaning – The unit should be cleaned only as Follow Instructions – All operating and other instructions should be followed. 13 Nonuse Periods – The power cord of the unit should be Water and Moisture – The unit should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. 14 Object and Liquid Entry – Care should be taken so that Carts and Stands – The unit should be used only with a cart or stand that is recommended by the manufacturer. 15 Damage Requiring Service – The unit should be serviced 4 5 6 recommended by the manufacturer. unplugged from the outlet when left unused for a long period of time. objects do not fall into and liquids are not spilled into the inside of the unit. by qualified service personnel when: 6A A unit and cart combination should be A. The power-supply cord or the plug has been moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn. 7 8 9 damaged; or B. Objects have fallen, or liquid has been spilled into the unit; or C. The unit has been exposed to rain; or Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. Heat – The unit should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat. D. The unit does not appear to operate normally or exhibits a marked change in performance; or E. The unit has been dropped, or the cabinet damaged. 16 Servicing – The user should not attempt to service the unit beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel. 17 Power Lines – An outdoor antenna should be located away from power lines. 18 Grounding or Polarization – Precautions should be taken so that the grounding or polarization is not defeated. 10 Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 2 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to rain and water. 3 Do not operate the unit upside-down. It may overheat, possibly causing damage. 4 Never open the cabinet. If a foreign object drops into the set, contact your dealer. 5 Do not use force on switches, knobs or cords. When moving the set, first turn the unit off. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself. 6 Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 7 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that your unit is faulty. CAUTION FOR CARRYING THIS UNIT Be sure not to carry or tip the unit with discs remaining in it. CAUTION FOR MOVING THIS UNIT When moving this unit, first remove all discs from the disc tray and close the tray by pressing the OPEN/CLOSE button, and then switch off the power after you confirm that the display has turned as follows. Never switch off the power if the display does not turn as above, otherwise the unit will get out of order during moving because the internal mechanism is not locked.  WARNING CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only. DANGER Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. DANGER: The use of optical instrument with this product will increase eye hazard. To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only. The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off. FCC INFORMATION 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. Relocate either this product or the device that is being affected by the interference. 3. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. 3  CONNECTIONS ● ● Before making any connections, switch OFF the power to the unit and the amplifier or other component. Connections should be made to the correct input terminals of the amplifier or other component. ● If the placement of this unit causes noise to other equipment, such as a tuner, separate them from each other. This unit LINE OUT DIGITAL AUDIO OUT OPTICAL To AC outlet ➊ ➋ Optical fiber cable (not included) Connection cord (included) Amplifier OPTICAL CD DIGITAL IN Choose one of the ways listed below to connect this unit to your amplifier. When the LINE OUT (analog) terminals of this unit are used ( ➊ ) ● ● ● 4 Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component. Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, refer to the operation instructions for the amplifier being used. Adjust the level of signals output into an amplifier, etc. by using the OUTPUT LEVEL control. When the DIGITAL AUDIO OUT (OPTICAL) terminal of this unit is used ( ➋ ) ● ● ● ● Before using this terminal, remove the terminal’s cover by pulling it. Make the connection from this terminal to the digital input terminal of an amplifier or D/A (digital-to-analog) converter by using a commercially available optical fiber cable. Be sure to attach the terminal’s cover when this terminal is not being used, in order to protect the terminal from dust. * Use an optical fiber cable that conforms to EIAJ standards. Other cables might not function correctly. When this terminal is used for the connection, set the OUTPUT LEVEL control to maximum.  IDENTIFICATION OF COMPONENTS CDC-845 DISC SKIP button (p. 7) * ( ) indicates the page number on which the control part is best described. OPEN/CLOSE button (p. 7) FRONT PANEL Disc play MODE select button (p. 7) STOP button (p. 8) POWER switch (p. 7) FILE/SAVE button (p. 14) PLAYXCHANGE button (p. 7) CLEAR button (p. 13) PLAY/PAUSE button (p. 7) Disc tray (p. 7) RANDOM button (p. 11) TAPE button (p. 17) PLAYXCHANGE PLAY/ PAUSE 1 PROG TAPE CLEAR FILE/SAVE MODE SKIP REPEAT RANDOM 2 OPEN/CLOSE STOP DISC SKIP DISC 3 4 5 SEARCH POWER +10 FILE 1 2 3 4 5 6 7 8 9 0 TIME OUTPUT LEVEL SAVE PEAK DOWN PHONES UP AUTO DISPLAY OFF PROG button (p. 12) Remote control sensor (p. 22) REPEAT button (p. 16) Numeric buttons (p. 8) SKIP button (p. 8) PEAK button (p. 20) TIME display mode select button (p. 9) Display panel SEARCH button (p. 9) OUTPUT LEVEL button (p. 10) PHONES jack (p. 10) REMOTE CONTROL TRANSMITTER DISC-select buttons (p. 7) The control functions on the main unit and on the remote control transmitter are virtually identical, with the exceptions described below. DIMMER button (p. 10) OPEN/CLOSE PROG TAPE DIMMER TIME REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 7 8 9 0 DISC SKIP DISC SCAN button (p. 9) DISC SCAN SYNCHRO button (p. 21) SKIP PAUSE PLAY SEARCH INDEX STOP – OUTPUT LEVEL + INDEX button (p. 16) * The PLAY/PAUSE button on the main unit has both the functions of the PLAY button and the PAUSE button on the remote control transmitter. * Remote control transmitter has two DISC SKIP buttons. Pressing each button will search discs in the direction shown by the arrow. SYNCHRO OUTPUT LEVEL buttons (p. 10) (“+” is identical with “UP” and “–” with “DOWN” of the OUTPUT LEVEL control on the main unit.) This manual mainly describes how to operate this unit by using the front panel buttons. To operate this unit on the remote control transmitter, use buttons with the same name as those on the front panel. 5  CDC-745 * ( ) indicates the page number on which the control part is best described. DISC SKIP button (p. 7) FRONT PANEL OPEN/CLOSE button (p. 7) DISC-select buttons (p. 7) POWER switch (p. 7) STOP button (p. 8) PLAYXCHANGE button (p. 7) Disc tray (p. 7) PLAY/PAUSE button (p. 7) TIME display mode select button (p. 9) SEARCH button (p. 9) PLAYXCHANGE PLAY/ PAUSE TIME 1 DISC 3 2 4 5 SKIP SEARCH FILE/ SAVE OPEN/CLOSE STOP DISC SKIP MODE REPEAT RANDOM POWER FILE OUTPUT LEVEL +10 SAVE 1 2 3 4 5 6 7 8 9 0 PROG TAPE DOWN PHONES UP AUTO DISPLAY OFF PEAK Numeric buttons (p. 8) SKIP button (p. 8) PEAK button (p. 20) PROG button (p. 12) TAPE button (p. 17) Display panel Remote control sensor (p. 22) FILE/SAVE button (p. 14) OUTPUT LEVEL button (p. 10) MODE-select button (p. 7) REMOTE CONTROL TRANSMITTER REPEAT button (p. 16) PHONES jack (p. 10) RANDOM button (p. 11) The control functions on the main unit and on the remote control transmitter are virtually identical, with the exceptions described below. DIMMER button (p. 10) OPEN/CLOSE PROG TAPE DIMMER TIME REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 7 8 9 0 DISC SKIP DISC SCAN button (p. 9) DISC SCAN SYNCHRO button (p. 21) SKIP PAUSE PLAY SEARCH INDEX STOP – OUTPUT LEVEL + INDEX button (p. 16) SYNCHRO OUTPUT LEVEL buttons (p. 10) (“+” is identical with “UP” and “–” with “DOWN” of the OUTPUT LEVEL control on the main unit.) 6 * The PLAY/PAUSE button on the main unit has both the functions of the PLAY button and the PAUSE button on the remote control transmitter. * Remote control transmitter has two DISC SKIP buttons. Pressing each button will search discs in the direction shown by the arrow. This manual mainly describes how to operate this unit by using the front panel buttons. To operate this unit on the remote control transmitter, use buttons with the same name as those on the front panel.  LOADING DISCS/DISC PLAY CDC-845 CDC-745 5 6 2, 4 6 3, 6 6 1 1 6 3, 6 5 1 5 POWER 2, 4 Select the disc play mode (DISC MODE: SINGLE or ALL) while watching the display. MODE 2 Shows the selected disc mode. Label side upward OPEN/CLOSE “SINGLE” mode: The unit will play a designated disc only. “ALL” mode: The unit will play all discs in the tray in sequence. 6 Disc tray PLAY/ PAUSE 3 DISC SKIP * If necessary, select a desired disc by using a DISC-select button or the DISC SKIP button. DISC SKIP CDC-845 1 2 DISC 3 4 5 Load the fifth disc. 4 Notes After closing the disc tray by pressing the OPEN/CLOSE button in the stop mode or after selecting any disc by using the DISC SKIP button, the display shows the total number of tracks and the total recorded time of the disc to be played for a few seconds. ● CDC-745 OPEN/CLOSE 1 ● 2 DISC 3 4 5 PLAY/ PAUSE Additionally, you can close the disc tray by pressing the PLAY/PAUSE button, a DISC-select button, a numeric button or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the first disc to be played. PLAYXCHANGE During play, you can open the disc tray by pressing the PLAYXCHANGE button without interrupting disc play. However, in this case, pressing the DISC SKIP button has no effect. 7  To stop play temporarily PLAY/ PAUSE To stop play completely STOP PAUSE * To resume play, press the PLAY/PAUSE button again (or press the PLAY or PAUSE button on the remote control transmitter). To play a desired track on the disc DIRECT PLAY SKIP PLAY Select a desired track by using the numeric buttons. ● To play from the beginning of the track following the one now playing SKIP + 10 2 1 3 4 5 6 7 9 8 0 ● To play from the beginning of the track now playing SKIP The selected track number is displayed. ● Example: To select track 25 Press ➀ twice, then immediately press ➁ once. + 10 2 1 3 4 5 ➀ 6 7 8 To play from the beginning of the track before the one now playing SKIP 9 0 (twice) ➁ * These operations can also be performed when the unit is in the pause or stop mode. * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played. ➀ ➁ ➂ ➃ Display information at disc play ➀ ➁ ➂ ➃ ➄ ➅ ➄ 8 ➅ Encloses the tray number of the selected disc. Shows the tray numbers with discs. Shows the selected track number. Shows the time displays. (Refer to “Selecting time displays” on page 9.) Displays the numbers that correspond to the numbers of the tracks (as high as number 15) on the disc. After each track is played, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance. Shows the level of signals output into an amplifier or the headphone level adjusted by using the OUTPUT LEVEL control.  To advance or reverse play rapidly (MANUAL SEARCH) To advance rapidly ● SEARCH ● The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. Manual search can also be performed while disc play is paused, though no sound will be heard. (press and hold) To reverse rapidly SEARCH (press and hold) Scanning discs to search for a desired disc (or to check discs on the disc tray) When the DISC SCAN button is pressed while this unit is stopped, this unit will play an early part of each disc in turn. Each disc is played for 8 seconds. If, during this play, you hear a disc that you want to listen to in entirely, press this button once again, or press the PLAY button on the remote control transmitter. This will cancel this play mode and the unit will enter into the normal play mode. Notes During this play, the disc tray numbers flash on and off on the display. Every time the play of a disc is finished, the corresponding tray number is changed from flashing to lighting. ● DISC SCAN ● ● There may be a case that you can gain no sound with this play, if the disc has a long blank space between tracks, for example. Durng this play, the setting of the disc play mode (MODE), the program play mode, etc. are canceled temporarily. Selecting time displays You can select any of the four time displays by pressing the TIME display mode-select button. ➀ ➁ Elapsed time of the track now playing Remaining time of the track now playing Note The remaining time 21 or higher. ➁ ➃ Total remaining time on the disc ➂ Total disc play time will not be displayed for track number 9  Changing brightness of the display You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button. Except during play During play Normal illumination Normal illumination Dim Dim DIMMER “OFF” Dim (The AUTO DISPLAY OFF indicator illuminates. In this mode, if a disc is played, the display illumination will be off.) * While the display illumination is off, the AUTO DISPLAY OFF indicator on the front panel illuminates. FILE SAVE AUTO DISPLAY OFF When you listen with headphones Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL control. * Note that the use of the OUTPUT LEVEL control will also vary the level of the signal output to the amplifier. PHONES – OUTPUT LEVEL + OUTPUT LEVEL DOWN UP or Open/close the control door CDC-845 When it is not necessary to operate controls inside the control door, close the door. To close the door 10 To open the door  RANDOM-SEQUENCE PLAY You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or any desired disc in the disc tray. CDC-845 3 CDC-745 3 4 2 2 4 1 3 Select whether to play one disc or all discs in the tray. MODE * If the “SINGLE” disc play mode is selected, next select a desired disc by using the DISC SKIP button or a DISCselect button. 2 4 OPEN/CLOSE RANDOM To cancel random-sequence play Press the STOP button or RANDOM button once again, or open the disc tray by pressing the OPEN/CLOSE button. Notes ● This feature will not function during programming, or during programmed play. ● If the POWER is switched off when the random-sequence play mode is functioning, when the POWER is switched on again, the unit will begin the random-sequence play automatically. (This feature is available for timer play.) ● If the SKIP button is pressed during random-sequence play, the next randomly programmed track will be played. If the SKIP button is pressed, play will return to the beginning of the track now being played. ● ● This indication appears while the unit is mixing up tracks. Total remaining time on the disc will not be displayed during random-sequence play. 11  PROGRAM PLAY You can enjoy listening to your favorite tracks selected from one or several discs in any desired order using programmed play. CDC-845 CDC-745 2 5 3 1 5 1 3 4 1 3 4 3 4 Stop the unit. 2 Select the desired track. STOP + 10 2 PROG 2 3 4 5 6 7 8 9 0 * Repeat step 3 – 4 to set more programs. 5 3 1 When the programming is completed; PLAY/ PAUSE If necessary, select the desired disc. CDC-845 1 2 DISC 3 4 5 DISC SKIP or CDC-745 1 DISC 3 2 4 Display information during programming ➂ ➃ 12 ➀ ➁ ➂ ➃ Shows the program number for the track to be set next. Shows the selected disc and track number. Shows the total time of the tracks currently programmed. Shows only the numbers of programmed tracks on the selected disc. * If “P-01” does not appear in the display after the PROG button is pressed, press the TIME display mode-select button. ➀ ➁ 5 * If the total time exceeds 99 minutes and 59 seconds, the time will not be displayed.  Notes ● You can set as many as 40 programs at one time. ● You can set a whole disc as a program by pressing “0”, instead of selecting a track number. At that time, “AL” flashes in the display. ● If you will program tracks from more than one disc, before you press the PROG button, check the total recorded time of each disc on the disc tray by pressing the DISC SKIP button in turn. Without this operation, the total time of the programmed tracks will not be displayed during programming. ● The total time of the programmed tracks will not be displayed, if a track number higher than 20 is programmed. To stop program play ● ● Press the STOP button. The first track number programmed will be displayed. To resume play, press the PLAY/PAUSE button. Play will begin from the beginning of the program. To cancel a programmed setting There are several methods, as described below. ● Press the STOP button while the unit is stopped. ● CDC-845 only Press the CLEAR button while the unit is stopped. ● Open the disc tray. ● Switch off the power. ● ● ● If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks or no information. To return to the previous display, press the TIME display mode-select button once again. The SKIP ( and ) button can be used during playing, but only within the range of the programmed tracks. The SEARCH ( and ) button can be used during playing to search through all tracks, including unprogrammed tracks. To check programmed data 1. If the unit is in the play mode, press the STOP button. 2. Press the PROG button. 3. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. To correct programmed data 1. Follow the procedure described in “To check programmed data”. 2. Display the track number to be corrected by pressing the SKIP button. 3. Press a numeric button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. 4. After the correction has been completed, press the PROG button or PLAY/PAUSE button once again. 13  PROGRAM FILING This unit has a function that can store (file) program data that has been set. You can play a disc with your favorite program at any time without setting it again. However, note that you can not file program data which consists of tracks selected from more than one disc. CDC-845 CLEAR FILE/SAVE PLAY/PAUSE OPEN/CLOSE STOP DISC POWER PROG Numeric buttons 0 CDC-745 DISC 0 PLAY/PAUSE OPEN/CLOSE STOP POWER Numeric buttons PROG FILE/SAVE To file data of tracks programmed in a desired order 1 Follow step 1 – 3 on page 12. 2 Select track numbers in a desired order. + 10 1 2 3 4 5 6 7 8 9 0 * If programs have already been set, make sure that “TRACK” is flashing continuously in the display. If it is not, once again press the PROG button. (If a program play is being performed, press the STOP button, and then press the PROG button.) 3 CDC-845 CDC-745 FILE/SAVE FILE/ SAVE FILE SAVE AUTO DISPLAY OFF 14 Notes ● Program data filed in this way can be retained for about two weeks with the power switched off. ● One-program data can be filed for any one disc. If different program data is filed for a disc, the previous program data will be deleted from the file, and only the new program data will be retained in the file. ● Program data for a total of as many as about 100 discs can be filed at any one time.  To play with program data To delete program data from file 1 1 2 2 If the unit is playing a disc, press the STOP button. * If a program play is on standby, press the STOP button (or the CLEAR button for CDC-845 only) to cancel that program setting. If the FILE indicator is illuminated in the display, press the FILE/SAVE button to turn the indicator off. OPEN/CLOSE 3 Select the disc of which program you want to delete. DISC SKIP 3 If the FILE indicator is not illuminated in the display, press the FILE/SAVE button. CDC-845 CDC-745 FILE/ SAVE FILE/SAVE FILE 4 PROG SAVE AUTO DISPLAY OFF 4 Select the disc to be played. CDC-845 5 CDC-745 CDC-845 CDC-745 1 2 DISC 3 4 5 1 2 4 The SAVE indicator goes off. FILE/ SAVE FILE/SAVE DISC 3 5 Notes ● If, in step 4, the SAVE indicator does not illuminate, the disc does not have its program data in the memory’s file. ● To stop the play of the filed program data and change to ordinary play of the disc, press the FILE/SAVE button. By this operation, the disc will be played in the ordinary sequence of tracks, but the program data in the memory’s file for that disc will not be deleted from the memory. To once again call out the program data, follow step 3 and 4. ● In the “ALL” disc play mode, discs which have program data in the memory’s file are played with their program data, and others are played normally. To delete all program data from the memory’s file 1 2 Turn the POWER off. CDC-845 FILE/SAVE CDC-745 0 0 FILE/ SAVE (Press and hold.) 3 4 POWER CDC-845 FILE/SAVE CDC-745 0 0 FILE/ SAVE (Release.) 15  REPEAT PLAY You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. SINGLE REPEAT (S REP) (OFF) A single track is repeatedly played. * This is also available in the programmed-play mode and the random-sequence play mode. (If the repeat play mode is switched off, the programmed-play mode or the randomsequence play mode will be resumed.) REPEAT S REP FULL REPEAT (F REP) In the “SINGLE” disc play mode: A designated disc is repeatedly played. In the “ALL” disc play mode: All discs in the disc tray are repeatedly played. * In the programmed-play mode, all programmed tracks are repeatedly played. * In the random-sequence play mode, all randomly sequenced tracks are repeatedly played in the same order. FREP INDEX SEARCH If the disc includes index numbers, play can be started from any desired index number. 1 Select a track which has index numbers. 5 2 INDEX 3 Select the desired index number. 5 16 To cancel the index search function Press the INDEX button. Notes ● Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if such index numbers are included. ● If an index number is selected that is higher than any index number on that disc, play will start from the last index number point on the disc. ● For some discs, play may begin slightly prior to the actual designated index point. ● If the disc has no encoded index points, play will begin from the start of the selected track. ● The index number can be designated only while the INDEX number display is illuminated.  TRACK PROGRAMMING FOR RECORDING TO TAPE This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. ■ Automatic tape programming This is for recording tracks on a disc so that they best fit onto a tape. CDC-845 CDC-745 4 6 7, 8 1 7, 8 1 2 2 5 1 2 5 Stop the unit. 4 REPEAT 6 STOP * By pressing the REPEAT button, the unit automatically programs tracks for side A and side B separately considering the tape’s total time. Select the disc. DISC SKIP 7 3 4 6 8 The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 20.) Enter the tape’s total possible recording time. Begin recording on the tape deck and press the PLAY/PAUSE button on this unit at the same time. The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY/PAUSE button on this unit. Notes All tracks may not be programmed if the tape’s length is not enough. To program all tracks, use a longer tape. ● In step 6, you can check the program data for side A and side B. TAPE ● ➀ ➁ You can select any of four tape lengths by pressing the TAPE button. TAPE (off) ➂ ➀ 5 Otherwise, you can also enter the tape’s total possible recording time manually. Example: For a C-64 tape (32 minutes on each side) + 10 1 2 3 4 5 6 7 8 9 ➁ ➂ 0 ● ➁ ➀ Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. Shows the total time of programmed tracks for each side. Shows the programmed track numbers for each side. CD synchronized recording method can be used if your tape deck is compatible with it. In this case, in step 7 and 8, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 21.) 17  ■ Manual tape programming This is for recording desired tracks selected from one or more discs in any desired order onto tape. CDC-845 CDC-745 6 9 9 10, 11 3 2, 9 3 6 4 1 2 4 8 Follow step 1, 4 and 5 on page 17. 2, 9 Repeat step 3–4 to set more programs for the side B of the tape. You can select the same track again. * If “E rr” a ppears in the display, the track number just selected cannot be programmed because there is not enough time remaining on side B of the tape. Flashes on and off. PROG 9 3 10, 11 If necessary, select the desired disc. The peak level searching function of this unit is useful for adjusting recording level on the tape deck. For peak level searching, when the programming for side B is finished, press the PROG button and then press the PEAK button. DISC SKIP 4 Select the desired track. + 10 1 2 3 4 5 6 7 8 9 0 10 Begin recording on the tape deck and press the PLAY/PAUSE button on this unit at the same time. 11 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY/PAUSE button on this unit. Notes If you will program tracks from more than one disc, before you press the PROG button, check the total recorded time of each disc on the disc tray by pressing the DISC SKIP button in turn. Without this operation, the total remaining time of each side of the tape and previously programmed track numbers (and also unprogrammed track numbers) will not be displayed during programming. ● In step 5 and 8, even if “E rr” appears in the display, you can program another track of which time is shorter than the remaining time on the side of the tape. In this case, you can check the remaining time on the side of the tape by pressing the TIME display mode-select button. ● CD synchronized recording method can be used if your tape deck is compatible with it. In this case, in step 10 and 11, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 21.) ● 5 Repeat step 3–4 to set more programs for side A of the tape. You can select the same track again. * If “E rr” appears in the display, the track number just selected cannot be programmed because there is not enough time remaining on side A of the tape. 6 After you finish the programming for side A, program the pause mode by pressing the TAPE button. TAPE * “Pu” flashes in the display, and after then you can begin programming for side B. Notes on tape programming To check, cancel or correct program data, refer to page 13. ● Up to a maximum of 40 tracks can be programmed from among any or all of the five discs loaded on the disc tray. If, however, the PAUSE mode is inserted, each PAUSE is counted as one track. ● This function can be used to program up to track number 20. If the disc has more than 20 tracks, track number 21 and thereafter will not be programmed. ● 7 18 Follow step 3–4.  Display information during programming ➀ ➁ ➂ ➃ ➀ ➁ Shows the side of the tape and the program number for the track to be set next. Shows the selected disc and track number. Shows the total remaining time on the side of the tape. Programmed track numbers illuminate and unprogrammed ones flash on and off. * If “A-01” does not appear in the display after the PROG button is pressed, press the TIME display mode-select button. ➂ ➃ ■ Random sequential tape programming The unit will automatically program tracks on a disc in random sequential order for recording to tape. CDC-845 CDC-745 2 3, 4 3, 4 2 1 2 Follow step 1 – 5 on page 17. RANDOM Notes Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly. ● If the tape’s length is not enough, all tracks cannot be programmed. In this case, exchange the tape for a longer one. ● In step 2, you can check the program data for side A and side B. ● ➀ ➁ * The unit will automatically program tracks for side A and side B separately considering the tape’s total time. 3 4 Begin recording on the tape deck and press the PLAY/PAUSE button on this unit at the same time. ➂ ➀ The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY/PAUSE button on this unit. ➁ ➂ ● Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. Shows the total time of programmed tracks for each side. Shows the programmed track numbers for each side. CD synchronized recording method can be used if your tape deck is compatible with it. In this case, in step 3 and 4, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 21.) 19  Automatic searching of the peak level on a disc This convenient feature automatically searches for the part on a disc where the source level peaks, and next plays the part repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck. CDC-845 2 CDC-745 1 1 3 3 4 2 4 1 4 Stop the unit. 0 STOP 2 PEAK Select the SINGLE disc play mode. MODE Searches the disc for the peak level. 3 REP Select the disc. DISC SKIP REP Repeatedly plays the part where the source level peaks. Adjust the recording level on the tape deck listening to this repeat play. To cancel this function Press the STOP button. (Some other buttons can also be used to cancel this function.) Notes • This feature will also function in the program play mode. If program play is being performed, first press the STOP button, and then press the PEAK button. If program play is not being performed, only press the PEAK button. • To search for the peak level through all discs on the disc tray, in step 2, select the ALL disc play mode. 20 • Even if the peak level searching is performed twice or more on the same disc, the same part will not be always selected, because this unit will search for the peak level among parts on the disc that are randomly selected by the internal microcomputer.  CD SYNCHRONIZED RECORDING This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely. This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that they can receive the signals from this unit’s remote control transmitter at the same time. 1 1 2 3 MODE 4 5 6 +10 7 8 9 0 4 DISC SKIP DISC SCAN 4 3 1 SKIP PAUSE PLAY SEARCH INDEX STOP – OUTPUT LEVEL + SYNCHRO 4 Select the disc. 5 If necessary, select the desired track. SKIP DISC SKIP 4 or 2 Load a tape on the tape deck. * To record from the beginning of the tape, rewind the tape to the full end of the supply reel. * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 20.) 5 PLAY 3 Both CD play and tape deck recording begin. SYNCHRO This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit flashes on and off. * CD play begins a little later than recording. Notes • To finish or stop the recording, make proper operations on the tape deck. • Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 12–13 for the programming procedure.) • This function can also be used together with the automatic tape-programming function. (Refer to page 17–19.) 21  NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range 1 3 Remote control sensor 2 Within approximately 7 m (23 feet) Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement. ● Be sure the polarities are correct. (See the illustration inside the battery compartment.) ● Remove the batteries if the remote control transmitter will not be used for an extended period of time. ● If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. 30° 30° Notes ● There should be no large obstacles between the remote control transmitter and the main unit. ● If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter to not work correctly. In this case, reposition the main unit to avoid direct lighting. NOTES ABOUT HANDLING COMPACT DISCS ● This compact-disc player is designed only for playing of compact discs bearing the mark. Never attempt to load any other type of disc into the unit. The unit will also play 3-inch (8-cm) compact discs. ● To remove a disc from its storage case, open the case and then press down at the center; with a finger through the center hole and the outer edges held as shown in the illustration, lift the disc out carefully. ● ● Compact discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center. ,,, , , ● Do not try to clean the disc’s surface by using any type of disc cleaner, record spray, anti-static spray or liquid, or any other chemical-based liquid, because such substances might irreparably damage the disc’s surface. ● Do not expose discs to direct sunlight, high temperature or high humidity for a long period of time, because these might warp or otherwise damage the disc. Always handle the disc with care so that its surface is not scratched. NO! ● Compact discs are not subjected to wear during play, but damage to the disc surface when the disc is being handled can adversely affect the disc's play. To play a 3-inch (8-cm) CD Place it in the inner recessed area of the disc tray. Do not put a normal (5-inch/12-cm) CD on top of a 3-inch CD. 22  TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit's power cord and contact your authorized YAMAHA dealer or service center for assistance. SYMPTOM REMEDY PROBABLE CAUSE The player does not switch ON when the POWER switch is pressed. The power cord is not connected or not completely connected. Securely connect the power cord. The disc tray does not close completely. A foreign object is obstructing the tray. Carefully check the disc tray and remove the foreign object. A disc number does not illuminate in the display. The disc has been loaded upside down. Load the disc correctly. The disc is damaged. Check the disc carefully; replace it if necessary. There is moisture on the laser pickup. Wait 20 to 30 minutes after switching the unit ON before trying to play a disc. The disc has been loaded upside down. Reload the disc with the label side up. The disc is dirty. Clean the disc. Play is delayed, or begins at the wrong place. The disc may be scratched or damaged. Check the disc carefully; replace it if necessary. No sound. Improper output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. Improper amplifier operation. Set the amplifier controls to the correct input selection. The player is being subjected to vibrations or impacts. Relocate the player. Play does not begin. Sound “skips”. The disc is dirty. Clean the disc. Sound “hums”. Improper cable connections. Securely connect the audio cables. If the problem persists, the cables may be defective. Noise from a nearby tuner. The tuner is too close to the player. Move the tuner and player farther apart. Noise from inside of the disc tray. The disc may be warped. Replace the disc. The remote control transmitter does not work. The batteries of this remote control transmitter are too weak. Replace the batteries with new ones. Direct sunlight or lighting (of an inverter type of fluorescent lamp etc.) is striking the remote control sensor of the main unit. Change position of the main unit. SPECIFICATIONS AUDIO SECTION GENERAL Frequency response <CDC-845> ..................................... 2 Hz – 20 kHz, ±0.3 dB <CDC-745> ..................................... 2 Hz – 20 kHz, ±0.5 dB De-emphasis equalization ......................................... ±0.5 dB Harmonic distortion+noise (with L.P.F.) <CDC-845> ................................. Less than 0.002% (1 kHz) <CDC-745> ............................... Less than 0.0025% (1 kHz) S/N ratio <CDC-845> ............................................................... 118 dB <CDC-745> ............................................................... 115 dB Dynamic range ............................................................. 100 dB Wow & flutter ................................................... Unmeasurable Output voltage ................................................................. 2.0V Headphones output (–20 dB) ............ 200 ± 40 mV/150 ohms Power requirements U.S.A. and Canada models ............................ 120V, 60 Hz Power consumption ........................................................ 20W Dimensions (W x H x D) ...................... 435 x 107.5 x 387 mm (17-1/8” x 4-1/4” x 15-1/4”) Weight <CDC-845>................................................................. 6.0 kg <CDC-745>................................................................. 5.9 kg Accessories .................................................. Connection cord Remote control transmitter Batteries (size AA, R6,UM-3) Please note that all specifications are subject to change without notice. 23  YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA VR 20240