Yamaha S70XS de handleiding

Categorie
Audio-equalizers
Type
de handleiding

Deze handleiding is ook geschikt voor

S90 XS/S70 XS Editor VST Owner’s Manual 1
Contents
What is the S90 XS/S70 XS Editor VST? ................................2
Data Structure of the S90 XS/S70 XS Editor VST ..................3
Starting the S90 XS/S70 XS Editor VST..................................4
An Example of S90 XS/S70 XS Editor VST in Use .................7
S90 XS/S70 XS Editor VST Window ......................................13
Basic Operations....................................................................36
Menu ........................................................................................38
Troubleshooting .....................................................................55
Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for
your personal use.
The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.
Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without
the written consent of the manufacturer.
•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot
be held responsible for the results of the use of this manual and the software.
The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat
different from the screens which appear on your computer.
The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their
respective companies.
Click on the red-colored text to jump to the related item in this manual.
© 2009 Yamaha Corporation. All rights reserved.
This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operations. If you are not,
please refer to the owner’s manual which came with your Windows/Macintosh software before using the S90 XS/S70
XS Editor VST.
For information about hardware requirements, the interconnection of devices and the installation of the S90 XS/S70
XS Editor VST software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective
MIDI device.
S90 XS/S70 XS Editor VST
Owner’s Manual
S90 XS/S70 XS Editor VST
Owner’s Manual
What is the S90 XS/S70 XS Editor VST?
S90 XS/S70 XS Editor VST Owner’s Manual
2
What is the S90 XS/S70 XS Editor VST?
S90 XS/S70 XS Editor VST is a convenient tool which lets you edit and save the various parameters of your
S90 XS/S70 XS Music Synthesizer. These include Voice and Mixing parameters (edited in the Voice or Multi
mode of the S90 XS/S70 XS) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-
understand graphical interface, you can edit various parameters of the S90 XS/S70 XS right from your
computer—using the mouse to adjust the virtual knobs, sliders, and buttons and entering values from the
computer keyboard. Finally, all the changes you have made can be saved to your computer or transmitted to
the S90 XS/S70 XS instrument.
The S90 XS/S70 XS Editor VST, based on the “VST3 technology” by Steinberg, works as a VST3 plug-in with
Cubase series 4.5 or later (DAW application). The S90 XS/S70 XS Editor VST also works as the same way as
other VST instrument software, allowing you to save the edited settings of the S90 XS/S70 XS, or use them for
another project. In addition, you can handle the S90 XS/S70 XS Voices in the Media Bay window in Cubase
when using the S90 XS/S70 XS Editor VST with Cubase 4.5 or later, allowing you to search for, listen, and
play the S90 XS/S70 XS Voices within Media Bay in Cubase. The S90 XS/S70 XS Editor VST provides a
comprehensive and seamless music production environment—making the use of hardware and software
both easier and much more efficient.
Data Structure of the S90 XS/S70 XS Editor VST
S90 XS/S70 XS Editor VST Owner’s Manual
3
Data Structure of the S90 XS/S70 XS Editor VST
The S90 XS/S70 XS Editor VST lets you create the following data and save them as a single file (extension: .X2E).
Global data (latest status of edited global parameters)
Current data in the Voice mode (latest status of edited Voice)
Current data in the Multi mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices)
User Voice data (consisting of four Normal Voice Banks and one Drum Voice Bank)
Current settings include the latest settings of the Common and Element parameters for the Voice last assigned to
each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for
each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The S90 XS/
S70 XS Editor VST lets you edit parameters (including Element parameters) of the Voice assigned to each Part and
save the latest edit status as a file without storing it as a User Voice or a Mixing Voice. This means that you can
easily recall the latest status of the previous edit simply by opening the file.
n The S90 XS/S70 XS Editor VST handles the Global data which includes some of the parameters shown on the “G” row in
the Mixer section and all the parameters in the Global Settings of the Parameter Category section (pages 22 and 25).
The diagram illustrated below indicates the structure of the data created via the S90 XS/S70 XS Editor VST,
the structure of the data stored in the internal memory of the S90 XS/S70 XS instrument and the relationship
between those two types of data.
*1 When the S90 XS/S70 XS instrument is connected to the computer properly with the ONLINE status, editing a parameter on the S90 XS/S70 XS Editor VST affects the same parameter
on the S90 XS/S70 XS itself, and vice versa.
*2 The Store Voice operation on the Editor will store the Voice data to the memory of the S90 XS/S70 XS instrument as well as the memory of the Editor.
*3 The Store Global operation and Store Mixing operation will store the data only to the memory of the S90 XS/S70 XS instrument.
S90 XS/S70 XS Editor VST (VST3 Plug-in)
Global data
Current data in the Voice mode
Current data in the Multi mode
• Multi Common data
Part Voice data
(16 Voices)
Mixing Voice data
(16 Voices)
Store Voice
*2
(page 50)
Store Voice
*2
(page 50)
User Voice data
• Normal User 1 (128 Voices)
• Normal User 2 (128 Voices)
• Normal User 3 (128 Voices)
• Normal User 4 (128 Voices)
• Drum User (32 Voices)
Editor file
(Extension: .X2E)
Data sync
*1
Data sync
*1
Data sync
*1
Global data
Current data in the Voice mode
Current data in the Multi mode
• Multi Common data
Global data
Part Voice data
(16 Voices)
Mixing data
• Multi Common data
Mixing Voice data
(16 Voices)
Store Voice
*2
(page 50)
Store Voice
*2
(page 50)
Store Voice
*2
(page 50)
Store Mixing
*3
(page 51)
Store Global
*3
(page 50)
S90 XS/S70 XS instrument
Store Voice
*2
(page 50)
Project file of the DAW application (computer)
User Voice data
• Normal User 1 (128 Voices)
• Normal User 2 (128 Voices)
• Normal User 3 (128 Voices)
• Normal User 4 (128 Voices)
• Drum User (32 Voices)
Starting the S90 XS/S70 XS Editor VST
S90 XS/S70 XS Editor VST Owner’s Manual
4
Starting the S90 XS/S70 XS Editor VST
Install the USB-MIDI Driver, and S90 XS/S70 XS Editor VST by following the respective Installation Guides.
After making the required connection and setting the MIDI IN/OUT parameter to “USB” in the Utility mode,
follow the instructions below to start the S90 XS/S70 XS Editor VST.
This example describes the operation steps for Cubase 4.5 with the device connected to a computer via a
USB cable.
n For details about connection between the S90 XS/S70 XS and a computer, refer to the Owner’s Manual of the S90 XS/
S70 XS.
n If you want to use audio signals from the S90 XS/S70 XS instrument on the DAW application, make sure to connect the
OUTPUT jacks or ASSIGNABLE OUTPUT jacks of the S90 XS/S70 XS to your audio interface.
n On Windows Vista, make sure to remove the checkmark of Port 4 at the "All MIDI Input" section in the [Device] menu
[Device Setup].
1. Open the VST Instrument window via [Devices] [VST Instruments] in the DAW
application menu.
2. Click the Instrument Slot in the VST Instrument Rack, then select [External] [S90 XS/
S70 XS VST].
3. When the dialog box asking “Do you want to create a MIDI track assigned to plug-in
“S90 XS/S70 XS VST”?” appears, click [Create].
A MIDI track will be created and the S90 XS/S70 XS Editor VST window will appear.
Starting the S90 XS/S70 XS Editor VST
S90 XS/S70 XS Editor VST Owner’s Manual
5
4. Click the Output Setup button at the right side of the Edit button ( ) in the VST
Instrument Rack, then verify that “S90/S70 XS 1 [stereo] is selected. If you want to use
the ASSIGNABLE OUTPUT L/R jacks for Cubase project, also check (enable) “S90/S70
XS 2 [stereo].
After this operation, the S90 XS/S70 XS Busses appear in the project window of the DAW application.
5. Call up the Editor Setup window in the S90 XS/S70 XS Editor VST via [File] [Editor
Setup].
6. Set the “Detail” column to “off at the USB in the Data Port section.
7. Select “S90 XS/S70 XS” at the [USB Device] column.
8. Click [OK] button at the bottom.
9. Call up the VSTi Setup window in the S90 XS/S70 XS Editor VST via [File] [VSTi
Setup].
10. Set signal input ports of your audio interface that is connected with the S90 XS/S70 XS
in the Audio Return Ports column.
11. Click the [OK] button at the bottom.
12. If the S90 XS/S70 XS Editor VST is “OFFLINE, click the [ONLINE/OFFLINE] button to go
“ONLINE.
Starting the S90 XS/S70 XS Editor VST
S90 XS/S70 XS Editor VST Owner’s Manual
6
13. In Quick Set Up, select [1] or [2].
n For more details about MIDI button group in the Quick Set Up, refer to the Owner’s Manual of the S90 XS/S70
XS instrument.
n Step 5 through 11 are required when starting S90 XS/S70 XS Editor VST for the first time. These steps are
saved in the editor and do not need to be repeated each time it is started.
n The S90 XS/S70 XS Editor VST launch procedure is the same as for other VST instruments. Refer to the
manual supplied with your DAW application for information on other launch procedure.
An Example of S90 XS/S70 XS Editor VST in Use
S90 XS/S70 XS Editor VST Owner’s Manual
7
An Example of S90 XS/S70 XS Editor VST in Use
There is no single way to use the many components in the S90 XS/S70 XS Editor VST. Your editing needs and
preferences may differ; however, the following example gives you a simple step-by-step guide in how to use
the S90 XS/S70 XS Editor VST. As an example, this section explains how to edit a Voice in the Voice mode,
edit a Mixing program in the Multi mode, then store the edited data to the memory of the S90 XS/S70 XS
instrument and save the final results of your editing to a file.
n If the [Multi] indication (at the top left of the display) is on, perform the instructions below from step 1. If the [Voice]
indication is on, perform the instructions below from step 2.
1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left
of the display).
If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync
window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you
should proceed to step 3.
2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE]
indication is set to [OFFLINE].
3. On the Auto Sync window, set communication-related parameters such as Input Port,
Output Port and Device Number in the Data Port section, then set the direction of Data
Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section.
When you want to use the settings on the S90 XS/S70 XS itself as starting data for editing, set the boxes
of Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to
the computer. To use the settings on the S90 XS/S70 XS Editor VST as starting data, set both Global,
Current and Voice to the opposite, so that the arrow indicates data flow from the computer to the
instrument. For details, see page 41.
CAUTION
Keep in mind that when you set Global, Current and Voice to On, enable data sync from the computer to the S90 XS/S70 XS
(instrument), and then click the [Start] button at the bottom, this operation transmits these types of data currently on the
Editor to the S90 XS/S70 XS itself, automatically overwriting and erasing all the corresponding data already existing on
memory of the S90 XS/S70 XS instrument. When you want to use the settings on the S90 XS/S70 XS itself as starting data
for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the
instrument to the computer.
CAUTION
Make sure to set the desired data transfer direction in order to avoid data loss.
An Example of S90 XS/S70 XS Editor VST in Use
S90 XS/S70 XS Editor VST Owner’s Manual
8
4. From the Auto Sync window, click [Start] at the bottom.
The data synchronization will be started if the Port settings are correct. As soon as data synchronization
is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE
indication automatically. In this ONLINE status, editing a parameter on the S90 XS/S70 XS Editor VST
affects the same parameter on the S90 XS/S70 XS itself, and vice versa.
5. Edit the Voice in the Voice mode.
5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the
VOICE LIBRARY window.
5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to
the current Part.
You can confirm the sound of the selected Voice by clicking any note on the virtual keyboard or the S90
XS/S70 XS keyboard.
5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY
window.
You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of
the window. By executing this operation, the Voice selection is reset to the original status and the VOICE
LIBRARY window closes.
CAUTION
When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store the
edits, make sure to store the Voice by using the Store window (page 50) before changing the Voice.
An Example of S90 XS/S70 XS Editor VST in Use
S90 XS/S70 XS Editor VST Owner’s Manual
9
5-4 Edit the Voice parameters as desired.
Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them.
To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the
S90 XS/S70 XS keyboard.
To make detailed settings of the selected Voice, click the arrow button at the top of the right panel
next to the main window to call up the Detailed Parameter section.
6. Store the edited settings as a User Voice, as necessary.
6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 50).
6-2 Select a Voice Bank from the following list:
• Normal User 1
• Normal User 2
• Normal User 3
• Normal User 4
• Drum User
n Normal User 1 – 4 are shown in the Store window when editing the Normal Voice while Drum User is shown in
the Store window when editing the Drum Voice.
An Example of S90 XS/S70 XS Editor VST in Use
S90 XS/S70 XS Editor VST Owner’s Manual
10
6-3 Open the selected Bank, select the desired number as destination, then enter the name
of the Voice in the box at the top of this window.
6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank.
Performing this operation will store the Voice data to the User Voice Bank in the S90 XS/S70 XS
instrument as well as that within the Editor.
CAUTION
When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument) will be
overwritten. Select the destination Voice number carefully to prevent important data from being erased accidentally.
n You can store the settings of the parameters in the “G” row by clicking [Store Global] under [Edit] in the menu
bar.
7. Edit the Mixing parameters in the Multi mode.
7-1 Change the mode to the Multi mode by clicking [Multi] of the [Voice]/[Multi] indication.
The Auto Sync appears automatically during ONLINE status.
7-2 From the Auto Sync window, click [Start] at the bottom.
Data synchronization will be started if the Port settings are correct. As soon as data synchronization is
completed, the Auto Sync window is closed.
An Example of S90 XS/S70 XS Editor VST in Use
S90 XS/S70 XS Editor VST Owner’s Manual
11
7-3 On the “G” row of the Global/Multi section, click the Multi name or Voice name to call up
the MULTI LIBRARY window.
The MULTI LIBRARY lists the Multi programs which are stored in the S90 XS/S70 XS instrument when the
S90 XS/S70 XS Editor is in ONLINE status.
n The MULTI LIBRARY is not available when the S90 XS/S70 XS Editor is in “OFFLINE” status.
You can call up the Multi setup simply by selecting one of these listed template programs.
7-4 From the list in the MULTI LIBRARY, select the desired Multi program to be edited.
All the Multi parameters such as the Voice assignment to Part 1 – 16 are set automatically only via this
operation.
7-5 Edit the parameters of the Mixing and Voice assigned to each Part.
If you want to change the parameter values from the original ones of the selected Multi, click (drag and
drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/Multi section
and “1” – “16” in the Part section.
To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the
S90 XS/S70 XS keyboard.
To make detailed settings of the selected Multi, click the arrow button at the top of the right panel
next to the main window to call up the Detailed Parameter section.
n The S90 XS/S70 XS Editor VST lets you edit the Voice parameters in the Multi mode as well as Voice mode. In
the Voice mode, you can edit only the selected Voice. In the Multi mode, on the other hand, you can edit the
parameters of the Voice assigned to each Part as well as the Mixing parameters. The edited Voice can be
stored to the same Voice Bank as a User Voice regardless of the mode used for editing.
An Example of S90 XS/S70 XS Editor VST in Use
S90 XS/S70 XS Editor VST Owner’s Manual
12
8. Store the edited Voice or a Multi, as necessary.
8-1 Select the [Store Mixing] under the [Edit] menu to store the edited Multi.
n You can also store the edited Multi with the Store operation on the S90 XS/S70 XS instrument. For details,
refer to the Owner's Manual of the S90 XS/S70 XS.
8-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in
the menu bar to call up the Store window (page 50) then store the Voice via the same
operations as in steps 6-1, 6-2, 6-3 and 6-4.
9. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a file
(extension: *.X2E).
All the settings you made and the Voice data you stored to the User Banks will be saved as a single file
(extension: .X2E). When you open this file next time to call up the Auto Sync window, click [Start] to
synchronize the status of the parameter settings between the S90 XS/S70 XS Editor VST and the S90 XS/
S70 XS instrument.
The S90 XS/S70 XS Editor VST data can be saved into a project file of the DAW application.
S90 XS/S70 XS Editor VST Window: Overall section
S90 XS/S70 XS Editor VST Owner’s Manual
13
S90 XS/S70 XS Editor VST Window
Overall section
1 File, Edit, Bulk, Help
Refer to page 38.
2 Voice/Multi mode
Determines the mode of the S90 XS/S70 XS, Voice or Multi. As soon as “Voice” or “Multi” is selected
here, the mode of the S90 XS/S70 XS instrument changes accordingly and the Auto Sync window
(page 54) opens. After setting parameters as necessary on this window, click [Start] to execute data
synchronization between the S90 XS/S70 XS Editor VST and the S90 XS/S70 XS instrument.
3 ONLINE/OFFLINE
Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is
indicated, the edited status is completely synchronized between the S90 XS/S70 XS Editor VST and the
S90 XS/S70 XS instrument, meaning that any parameter edit you make on the S90 XS/S70 XS Editor VST
is reflected in the same parameter on the S90 XS/S70 XS instrument and vice versa. When OFFLINE is
selected, editing on the S90 XS/S70 XS Editor VST will not affect the S90 XS/S70 XS instrument and vice
versa even if the S90 XS/S70 XS instrument is connected to a computer.
Note that the indication here is automatically changed according to the status of communication
between the S90 XS/S70 XS Editor VST and the S90 XS/S70 XS instrument. For example, the ONLINE
status changes automatically to OFFLINE when the cable is disconnected accidentally.
1
Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE (2) described below.
Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the
S90 XS/S70 XS instrument is not properly connected to a computer.
2
This OFFLINE indication shows that the MIDI Port is set properly and the S90 XS/S70 XS is properly
connected to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you
can synchronize the settings between the S90 XS/S70 XS Editor VST and the S90 XS/S70 XS by clicking
the [Start] button. As soon as data synchronization is completed, the Auto Sync window is closed and the
status of the Editor changes from OFFLINE to ONLINE.
n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync
window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync
window.
3
This OFFLINE indication shows that the MIDI Port is not set properly or the S90 XS/S70 XS instrument is not
connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to
connect the S90 XS/S70 XS instrument to a computer, set the MIDI Port properly then click the [Start]
button in the Auto Sync window to execute data synchronization between the S90 XS/S70 XS Editor VST
and the S90 XS/S70 XS instrument. As soon as data synchronization is completed, the Auto Sync window
is closed and the status of the Editor is changed from OFFLINE to ONLINE.
1
2
3
S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Voice”)
S90 XS/S70 XS Editor VST Owner’s Manual
14
Mixer section (when the Voice/Multi is set to “Voice”)
1 Global
This strip lets you edit the main parameters in the Voice mode, such as effect-related ones. Clicking “G”
turns this section on as illustrated below.
n When editing any of the Global parameters described below, a small square appears at the top right of the
“G” box until you save the edited data as a file. This indication is the same as the green [F] indicator
(page 27).
Ins.FX (Insertion Effect)
Turns the Insertion Effect on or off.
Chorus
Turns the Chorus on or off and selects the Chorus type.
Reverb
Turns the Chorus on or off and selects the Reverb type.
MFX (Master Effect)
Turns the Master Effect on or off and selects the Master Effect type.
MEQ Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)
Turns the Master EQ on or off and edits the parameters.
Volume
Adjust the entire volume.
2 [Voice]/[AD Part] tab
Selects the Parts to be edited from [Voice] and [AD Part]. The illustration below indicates that the [Voice]
tab is active.
1
3
2
Before editing
After editing
S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Voice”)
S90 XS/S70 XS Editor VST Owner’s Manual
15
3 Voice
When the [Voice] is selected:
Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below.
n When editing any of the Voice parameters described below, a small square appears at the top right of the “V”
box until you save the edited data as a file or you store the edited data as a Voice. This indication is the same
as the blue [V] indicator (page 30).
n The MIDI monitor mark is at the left side of the “V” mark. A small red LED lights when MIDI messages are
received.
Category, Bank, No., Voice Name
Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window
appears at the right half section, letting you select a different Voice for editing.
VOICE LIBRARY
1 Close button
Click this to close this window without applying the changes to the S90 XS/S70 XS Editor VST.
2 [Category]/[Bank] checkboxes
Click either of these boxes to determine whether the Voices listed here are divided into Category
folders or Bank folders.
Before editing
After editing
19
3
4
5
2
67
8
S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Voice”)
S90 XS/S70 XS Editor VST Owner’s Manual
16
3 [+]/[–] buttons
Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to
close all folders.
4 Folder (Category or Bank)
Click each folder to open or close it.
5 Voices
Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When
double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the
Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by
dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-and-
dropping the Voice(s) to a new location.
A checkbox exists at left of each Voice. If you enter checkmarks to the checkboxes of your most-used
or favorite Voice, you can call up a list of these Voices on the VOICE LIBRARY by setting the [Favorites]
checkbox to on.
n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as
normal on your computer OS.
n By right-clicking on Windows / <control> key + clicking on Macintosh this section and selecting a
menu, you can use the following functions.
Opening/closing all the folders
Determining whether the Voices listed here are divided into Category folders or Bank folders.
Copying/pasting
Changing the Voice name
Deleting all the checkmarks of the Favorites checkboxes at left of the Voices
Saving the VST presets
n There are two ways to save a VST preset.
Right-click (Windows) / <control> key + click (Macintosh) on the Voice Library > Save VST presets
Click the “Save a VST preset” button on the DAW application
“Save VST presets” on the right click menu allows you to save a voice of the User Bank separately.
You need to save the voice of the Preset Bank to the User Bank when you want to save the Voice of
the Preset Bank as a VST preset.
The “Save a VST preset” button on the DAW application will save all settings (e.g. Editor Setup, VSTi
Setup) of the S90 XS/S70 XS Editor VST as a VST preset.
6 Search Box
You can search for your desired Voice by inputting a keyword here.
7 [Favorites] checkbox
By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE
LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the
appropriate checkboxes at the left of each Voice.
8 [OK]/[Cancel] buttons
Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit
without applying the Voice selection.
9 [Refresh] button
When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the S90 XS/S70 XS
itself, the name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the
S90 XS/S70 XS. If this happens, click this button to update the Voice names of the VOICE LIBRARY.
S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Voice”)
S90 XS/S70 XS Editor VST Owner’s Manual
17
EQ Lo, Mi, Hi (Part EQ)
Adjusts the equalizer settings for the current Voice.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using
the graphic knobs.
Volume
Adjusts the volume of the current Voice.
ARP (Arpeggio)
Turns Arpeggio playback on or off for the current Voice.
When the [AD Part] is selected:
This section lets you edit parameters for the A/D Part in the Voice mode. Clicking “AD” row turns this
section on as illustrated below.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the A/D Part in the Voice
mode by using the graphic knobs.
Volume
Adjusts the Volume for the A/D Part.
Output Select
Determines the specific output(s) for the A/D Part.
LCD Output jacks Stereo/Mono
L&R OUTPUT L and R Stereo
asL&R ASSIGNABLE OUTPUT L and R Stereo
asL ASSIGNABLE OUTPUT L Mono
asR ASSIGNABLE OUTPUT R Mono
vocoder Insertion Effect for Part 1
-
S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Multi”)
S90 XS/S70 XS Editor VST Owner’s Manual
18
Mixer section (when the Voice/Multi is set to “Multi”)
1 Global
This strip lets you edit the main parameters in the Multi mode, such as effect-related ones. Clicking “G”
turns this section on as illustrated below.
n When editing any of the Global parameters described below, a small square appears at the top right of the
“G” box until you save the edited data as a file. This indication is the same as the green [F] indicator
(page 30).
1
3
2
Before editing
After editing
S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Multi”)
S90 XS/S70 XS Editor VST Owner’s Manual
19
Multi program
At the right of the “G” indication, the name of the Multi program which includes the parameter settings
for all the Parts 1 – 16 is shown when the [Part 1-16] tab (page 20) is selected. Clicking the Multi
program name will call up the MULTI LIBRARY which lets you select the desired Multi program.
MULTI LIBRARY
1 Close button
Click this to close this window without applying the changes to the S90 XS/S70 XS Editor VST.
2 [+]/[–] buttons
Click the [+] button to open all the folders so that all Multi programs appear in all folders. Click the [–]
button to close all folders.
3 Multi programs
Indicates the Multi programs included in the folder. When pressing the [OK] button after clicking or
double-clicking on a Multi, the Multi is actually selected and this window closes.
n By right-clicking on Windows / <control> key + clicking on Macintosh this section and selecting a
menu, you can use the following function.
• Opening/closing all the folders
4 Search Box
You can search for your desired Multi by inputting a keyword here.
5 [OK]/[Cancel] buttons
Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit
without applying the settings.
6 [Refresh] button
When the MULTI LIBRARY is shown in the Editor and you store the Multi(s) on the S90 XS/S70 XS itself,
the name(s) of the Multi(s) in the MULTI LIBRARY may be different from the Multi name(s) on the
S90 XS/S70 XS. If this happens, click this button to update the Multi names of the MULTI LIBRARY.
Ins.FX (Insertion Effect)
Switches the Insertion Effect on or off.
Chorus
Turns the Chorus on or off and selects the Chorus type.
Reverb
Turns the Chorus on or off and selects the Reverb type.
MFX (Master Effect)
Turns the Master Effect on or off and selects the Master Effect type.
MEQ Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)
Turns the Master EQ on or off and edits the parameters.
Volume
Adjusts the entire volume.
2
1
3
4
5
6
S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Multi”)
S90 XS/S70 XS Editor VST Owner’s Manual
20
2 [Part 1-16]/[AD Part] tab
Selects the Parts to be edited from [Part 1-16] and [AD Part]. The illustration below indicates that the
[Part 1-16] tab is selected.
3 Part
When [Part 1-16] is selected:
This section lets you edit parameters for each Part. Clicking any of 1 – 16 turns the corresponding Part
on. In the example illustration below, Part 1 is active.
n When editing any of the Voice parameters such as Element parameters for each Part, a small square
appears at the top right of the “1” – “16” box until you store the edited Voice as a User Voice or Mixing Voice
or you save the edited data as a file. This indication is the same as the blue [V] indicator (page 30).
Part (Part number)
Indicates the Part number. Clicking here turns the corresponding Part on.
n In some situations, selecting a Part number on the Editor may not change a Part number on the S90 XS/S70
XS and vice versa, even if the Editor is in the ONLINE status. If you come across such a situation and you
want to match the Part number of the S90 XS/S70 XS with the one in the Editor, change the Part number via
the panel controls of the S90 XS/S70 XS.
Mute/Solo
1 Mute
Sets the Mute status for each Part. Clicking “M” here changes the Mute status for all Parts
simultaneously.
2 Solo
Selects the Solo Part. Only one Part can be soloed at a time.
Category, Bank, No. and Voice Name
Indicates the Category Bank and name of the Voice assigned to each Part. When clicking here, the
VOICE LIBRARY window appears at the right half section, letting you select a different Voice for the
current Part. Using the VOICE LIBRARY is the same here as in the Voice mode; for details, refer to
page 15.
EQ Lo, Mi, Hi (Part EQ)
Adjusts the equalizer settings for each Part.
Ins.FX (Insertion Effect Switch)
Switches the Insertion Effect on or off.
n Insertion Effects can be applied up to eight Parts.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level, and stereo Pan position for each Part by using the
graphic knobs.
Volume
Adjusts the Volume for each Part.
12
S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Multi”)
S90 XS/S70 XS Editor VST Owner’s Manual
21
Rcv Channel (Receive Channel)
Determines the MIDI Receive Channel for each Part.
Output Select
Determines the specific output(s) for the individual Part. The following settings are available.
* When a Normal Voice is assigned to the edited Part, this value is indicated as “L&R (dr)” and the sound will be
output via the OUTPUT L and R jacks in stereo. When a Drum Voice is assigned to the edited Part, this value is
indicated as “drum” and the sound will be output via the jacks set in the Drum Key Edit as the Output Select
parameter on the S90 XS/S70 XS Editor VST.
ARP (Arpeggio)
Turns Arpeggio playback on or off for each Part.
n Up to four Parts can play back the Arpeggio simultaneously.
When [AD Part] is selected:
This section lets you edit parameters for the A/D Part in the Multi mode. Clicking “AD” row turns this
section on as illustrated below.
Ins.FX (Insertion Effect Switch)
Switches the Insertion Effect on or off.
n Insertion Effects can be applied up to eight Parts.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the A/D Part by using the
knob icons.
Volume
Adjusts the Volume for the A/D Part.
Output Select
Determines the specific output(s) for the A/D Part. The available settings are the same as those of the
A/D Part in the Voice mode. Refer to page 17.
LCD Output jacks Stereo/Mono
L&R OUTPUT L and R Stereo
asL&R ASSIGNABLE OUTPUT L and R Stereo
asL ASSIGNABLE OUTPUT L Mono
asR ASSIGNABLE OUTPUT R Mono
drum See below* See below*
S90 XS/S70 XS Editor VST Window: Parameter Category section (when the Voice/Multi is set to “Voice”)
S90 XS/S70 XS Editor VST Owner’s Manual
22
Parameter Category section (when the Voice/Multi is set to “Voice”)
You can edit detailed parameters for the current Part by clicking the button (located near the top right of
the window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed
Parameter section moves the Parameter Category Section rightward as shown below.
Parameter Category section
Parameter Category section Detailed Parameter section
S90 XS/S70 XS Editor VST Window: Parameter Category section (when the Voice/Multi is set to “Voice”)
S90 XS/S70 XS Editor VST Owner’s Manual
23
The indicated categories in the Parameter Category section differ depending on the selected row: G, V, or
AD Part, as illustrated below. Clicking each of Categories calls up the corresponding parameters in the
Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “V”
indication shown below appears by clicking the “V” row appearing only when the [Voice] tab is selected at
the bottom of the Mixer section. The “AD” indication shown below appears by clicking the “AD” row
appearing only when the [AD Part] tab is selected at the bottom of the Mixer section.
1 Open/Close button
This button opens/closes the Detailed Parameter section. When only the left arrow is indicated in white,
the Detailed Parameter section is hidden and you can call it up by clicking here. When only the right
arrow is indicated in white, the Detailed Parameter section is shown on the display, allowing you to edit
the displayed parameters. The Detailed Parameter section can be closed by clicking this button. You
can also conveniently open and close the Detailed Parameter window from your computer keyboard.
Hold down the <Ctrl> key (Command key for Mac) and simultaneously press the left arrow () key to
open the window, or hold <Ctrl> key (Command key for Mac) and press the right arrow () key to close
it.
2 Global Settings
This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter
categories calls up the corresponding Global parameters in the Detailed Parameter section.
3 Voice Common
This is shown when the “V” row is selected in the Mixer section. Clicking each of the parameter
categories calls up the corresponding Voice Common parameters in the Detailed Parameter section.
5
6
4
3
2
1
1 1
“G” “V” “AD”
S90 XS/S70 XS Editor VST Window: Parameter Category section (when the Voice/Multi is set to “Voice”)
S90 XS/S70 XS Editor VST Owner’s Manual
24
4 Element or Drum Key
This is shown when the “V” row is selected in the Mixer section. When a Normal Voice is selected
(“Element” is shown in the Parameter Category section) and you select an Element number (from 1 –
16), then clicking each of the parameter categories calls up the corresponding Element parameters in
the Detailed Parameter section. When a Drum Voice is selected (“Drum Key” is shown in the Parameter
Category section) and you select a key number (from C0 – C6), then clicking each of the parameter
categories calls up the corresponding Drum Key parameters in the Detailed Parameter section.
1 Checkboxes for Elements (available when the Normal Voice is selected)
Tur ns each Element on or off.
2 [1] – [8], [All] buttons (available when the Normal Voice is selected)
Selects the Element to be edited. When [All] is selected, the Element Quick Setting window appears in the
Detailed Parameter section. This window conveniently lets you edit frequently-used Element parameters of
all Elements in a single window.
3 Element Parameter categories (available when the Normal Voice is selected)
Indicates the categories of Element parameters. Clicking each of the categories calls up the
corresponding Element parameters in the Detailed Parameter section.
4 Checkbox for the Drum Key (available when the Drum Voice is selected)
Tur ns the current Drum Key on or off.
5 Drum Key (available when the Drum Voice is selected)
Indicates the current Drum Key to be edited. You can select the Drum Key to be edited by clicking either of
the triangular buttons below the key indication.
6 Drum Key Parameter categories (available when the Drum Voice is selected)
Indicates the categories of Drum Key parameters. Clicking each of categories calls up the corresponding
Drum Key parameters in the Detailed Parameter section.
5 AD
This is shown when the AD Part is selected in the Mixer section. The Detailed Parameter section shows
the Effect-related parameters.
6 i (Information)
Indicates information about the parameter at the cursor arrow position. To view the information for a
desired parameter, mouse-over the knob, slider or setting for that parameter. You can switch this
Information feature on or off by clicking the “
i” box.
1
4
2 53 6
When the Normal Voice is
selected:
When the Drum Voice is
selected:
S90 XS/S70 XS Editor VST Window: Parameter Category section (when the Voice/Multi is set to “Multi”)
S90 XS/S70 XS Editor VST Owner’s Manual
25
Parameter Category section (when the Voice/Multi is set to “Multi”)
You can edit detailed parameters for the current Part by clicking the button (located near the top right of the
window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed
Parameter section moves the Parameter Category Section rightward as shown below.
Parameter Category section
Parameter Category section Detailed Parameter section
S90 XS/S70 XS Editor VST Window: Parameter Category section (when the Voice/Multi is set to “Multi”)
S90 XS/S70 XS Editor VST Owner’s Manual
26
The indicated categories in the Parameter Category section differ depending on the selected Part type: G,
Part 1 – 16, or AD Part. Clicking each of the Categories calls up the corresponding parameters in the
Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “Part 1
– 16” indication shown below appears by clicking any place on the Part row appearing only when the [Part 1-
16] tab is selected at the bottom of the Mixer section. The “AD” indication shown below appears by clicking
the “AD” row appearing only when the [AD Part] tab is selected at the bottom of the Mixer section.
1 Open/Close button
Same as in the Voice mode (page 23).
2 Global Settings
This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter
categories calls up the corresponding Global parameters in the Detailed Parameter section.
3 Part Common
This is shown when one of Parts 1 – 16 is selected in the Mixer section. Clicking each of the parameter
categories calls up the corresponding Common parameters of the Voice/Part in the Detailed Parameter
section.
4 Element or Drum Key
This is shown when one of Parts 1 – 16 is selected in the Mixer section. When a Normal Voice is
assigned to the current Part (“Element” is shown in the Parameter Category section) and you select an
Element number (from 1 – 16), then clicking each of the parameter categories calls up the
corresponding Element parameters in the Detailed Parameter section. When a Drum Voice is assigned
to the current Part (“Drum Key” is shown in the Parameter Category section) and you select a key
number (from C0 – C6), then clicking each of the parameter categories calls up the corresponding Drum
Key parameters in the Detailed Parameter section.
For details, see the Voice mode (page 24).
5 AD
Same as in the Voice mode (page 24).
6 i (Information)
Same as in the Voice mode (page 24).
5
6
4
3
2
1
1 1
“G” Part 1 – 16 “AD”
S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Voice”)
S90 XS/S70 XS Editor VST Owner’s Manual
27
Detailed Parameter section (when the Voice/Multi is set to “Voice”)
This section indicates the detailed parameters of the selected category for the current Voice or Global
settings. This section introduces what parameters belong to each of the Parameter Categories. For details
about each parameter, refer to the Owner’s Manual of the S90 XS/S70 XS.
Three Indicators showing the Editing Status
One or more of the following three indicators are shown at the right top of the window when you edit a
parameter.
n These indicators, “V,” “G” and “F” are linked with the small squares at the top right of "V" box and “G” box in
the Mixer section. The “V” and “G” indicators disappear if you execute the Voice Store, Mixing Store and
Global Store operation, respectively. The “F” indicator and the small squares at the top right of the “G” box in
the Mixer section disappear only if you execute the File Save operation. All the indicators and the small
squares disappear if you execute the File Save operation.
Indicates that the Voice edits are not stored yet as a User Voice. This indicator disappears when you
execute Voice Store (page 50).
Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global
Store (page 50).
Indicates that the parameter edits are not saved yet as a file.
V, G, F
indicators
S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Voice”)
S90 XS/S70 XS Editor VST Owner’s Manual
28
Global Settings
This Parameter category which is called up by selecting the “G” row in the Mixer section consists of the
following sub categories.
Master FX/EQ (Master Effect/EQ)
Clicking this in the Parameter Category section calls up the Master Effect/EQ parameters in the Detailed
Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up
by selecting “Master FX” or “Master EQ” on the Utility Voice Select display.
Controller Assign
Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed
Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up
by selecting “Controller” on the Utility Select display.
Micro Tuning
Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed
Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up
by selecting “Micro Tune” on the Utility Select display.
Voice Common
This Parameter Category is called up by selecting the “V” row in the Mixer section. The parameters
belonging to this category lets you make the settings applied to all the Elements or Drum Keys commonly.
The following sub categories are included.
General
Clicking this in the Parameter Category section calls up the parameters such as Voice name and pitch-
related parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these
parameters are the same as those called up by selecting “Name,” “Play Mode,” “Filter/EG” and “3 Band
EQ” on the Voice Edit Select display.
ARP (Arpeggio)
Clicking this in the Parameter Category section calls up the Arpeggio-related parameters in the Detailed
Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up
by selecting “Arpeggio” on the Voice Edit Select display.
Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which
lets you use the search function for the selecting Arpeggio Types, as with the VOICE LIBRARY window
(page 15).
Control Set
Clicking this in the Parameter Category section calls up the Controller Set parameters in the Detailed
Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up
by selecting “Controller” on the Voice Edit Select display.
LFO (Low Frequency Oscillator)
Clicking this in the Parameter Category section calls up the LFO-related parameters in the Detailed
Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up
by selecting “LFO” on the Voice Edit Select display. This Parameter Category is not available for Drum
Voices.
Effect
Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed
Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up
by selecting “Effect” on the Voice Edit Select display.
S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Voice”)
S90 XS/S70 XS Editor VST Owner’s Manual
29
Element or Drum Key
This Parameter Category is called up by selecting the “V” row in the Mixer section. The “Element” is shown
when the Normal Voice is selected while the “Drum Key” is shown when the Drum Voice is selected. The
parameters belonging to this category lets you make the settings applied to each of the Elements or Drum
Keys individually. The following sub categories are included.
n For information about the checkboxes at left of each Element number 1 – 8 and “All,” refer to page 24. For information
about the Drum Key (note name) and checkbox, refer to page 24.
n The Element parameters of the Normal Voice and Drum Key parameters of the Drum Voice can be edited only on the
Editor. Note that these cannot be edited on the S90 XS/S70 XS instrument.
Oscillator/Pitch
Clicking this in the Parameter Category section calls up the parameters related to the Oscillator and
Pitch in the Detailed Parameter section.
Filter
Clicking this in the Parameter Category section calls up the Filter-related parameters in the Detailed
Parameter section.
Amplitude
Clicking this in the Parameter Category section calls up the Amplitude-related parameters in the
Detailed Parameter section.
LFO/EQ (Low Frequency Oscillator/Equalizer)
Clicking this in the Parameter Category section calls up the parameters related to the LFO and EQ in the
Detailed Parameter section.
AD
This Parameter Category is called up by selecting the “AD” row in the Mixer section. The parameters
belonging to this category lets you make the settings applied to the A/D Part in the Voice mode. The
following sub category is included.
Effect
Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to
the A/D Part of the Voice mode in the Detailed Parameter section.
S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”)
S90 XS/S70 XS Editor VST Owner’s Manual
30
Detailed Parameter section (when the Voice/Multi is set to “Multi”)
This section indicates the detailed parameters of the selected category for the current Part and the Voice
assigned to the current Part, or the Global settings. This section introduces what parameters belong to each
of the Parameter Categories. For details about each parameter, refer to the Owner’s Manual of the S90 XS/
S70 XS.
Four Indicators showing the Editing Status
One or more of the following four indicators are shown at the right top of the window when you edit a
parameter.
n These indicators, “V,” “M,” “G” and “F” are linked with the small squares at the top right of the “1” – “16” boxes and “G”
box in the Mixer section. The “V,” “M” and “G” indicators disappear if you execute the Voice Store, Mixing Store and
Global Store operations, respectively. The “F” indicator and the small squares at the top right of the “G” box in the Mixer
section disappear only if you execute the File Save operation. All the indicators and the small squares disappear if you
execute the File Save operation.
Global Settings
This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following
sub categories.
Controller Assign
Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed
Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up
by selecting “Controller” on the Utility Select display.
Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator
disappears when you execute Voice Store (page 50).
Indicates that the Multi edits are not stored yet. This indicator disappears when you execute Mixing
Store (page 51).
Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global
Store (page 50).
Indicates that the parameter edits are not saved yet as a file.
V, M, G, F
indicators
S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”)
S90 XS/S70 XS Editor VST Owner’s Manual
31
Micro Tuning
Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed
Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up
by selecting “Micro Tune” on the Utility Select display.
Multi Common
This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following
sub categories.
Effect
Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed
Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up
by selecting “Effect” on the Multi Common Edit Select display then selecting “Reverb” and “Chorus.”
Master FX/EQ (Master Effect/EQ)
Clicking this in the Parameter Category section calls up the parameters related to the Master Effect and
EQ in the Detailed Parameter section. On the S90 XS/S70 XS instrument, the Master Effect parameters
are the same as those called up by selecting “Effect” on the Multi Common Edit Select display then
selecting “Master,” while the Master EQ parameters are the same as those called up by selecting
“Master EQ” on the Multi Common Edit Select display.
Multi Name
Clicking this in the Parameter Category section calls up the box which lets you edit the Multi name in the
Detailed Parameter section. On the S90 XS/S70 XS instrument, this is the same as the display called up
by selecting “Name” on the Multi Common Edit Select display.
Part Common
This Parameter category which is called up by selecting any of the “1” – “16” rows in the Mixer section
consists of the following sub categories.
General
Clicking this calls up the GENERAL window in the Parameter Category section. This window lets you edit
the Voice Common parameters such as naming and the Mixing Part parameters such as Pitch,
Portamento, Note/Velocity Limit and Part EQ. In the Part Common General section, both the Mixing Part
parameters (the “M” indicator appears at the top right during editing) and Voice Common parameters
(the “V” indicator appears at the top right during editing) can be edited. To distinguish between them, a
small dot is shown at the immediate left of the parameters.
ARP (Arpeggio)
Clicking this in the Parameter Category section calls up the parameters related to the Arpeggio
assigned to the current Part in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these
parameters are the same as those called up by selecting “Arpeggio” on the Multi Common Edit Select
display or Multi Edit Select display.
Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which
lets you use the search function for the selecting Types, as with the VOICE LIBRARY window (page 15).
RCV/Control Set (Receive/Control Set)
Clicking this calls up the RCV/Control Set window in the Parameter Category section. This window lets
you edit the Receive Switch parameters for the current Part and the Controller Set Assign parameters for
the current Part and the Voice. On the S90 XS/S70 XS instrument, these parameters are the same as
those called up by selecting “RcvSw” on the Multi Edit Select display.
LFO (Low Frequency Oscillator)
Clicking this in the Parameter Category section calls up the LFO-related parameters of the Voice
assigned to the current Part in the Detailed Parameter section. This Parameter Category is not available
if the Drum Voice is assigned to the current Part.
S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”)
S90 XS/S70 XS Editor VST Owner’s Manual
32
Effect
Clicking this in the Parameter Category section calls up the parameters related to the Insertion Effect for
the current Part and System Effect applied to all the Parts in the Detailed Parameter section.
Element or Drum Key
This Parameter Category is called up by selecting any of the “1” – “16” rows in the Mixer section. The
“Element” indication appears when the Normal Voice is assigned to the current Part while the “Drum Key” is
shown when the Drum Voice is assigned. The parameters belonging to this category lets you make the
settings applied to each of the Elements or Drum Keys individually. For details, see the Voice mode section.
AD
This Parameter Category is called up by selecting the “AD” row in the Mixer section. The parameters
belonging to this category lets you make the settings applied to the A/D Part in the Multi mode. The following
sub category is included.
Effect
Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to
the A/D Part of the Multi mode in the Detailed Parameter section.
S90 XS/S70 XS Editor VST Window: Bottom section
S90 XS/S70 XS Editor VST Owner’s Manual
33
Bottom section
1 Controller Set status
This section indicates which controller of the S90 XS/S70 XS (either built-in or connected) is used as the
Control Source of the Controller Set edited in the RCV/Control Set window.
1 Part
Indicates the current Part. When [Voice]/[Multi] is set to “Voice” (Voice mode is enabled), in the Voice
mode, this indication is fixed to “1.” When the [Voice]/[Multi] is set to “Multi” (Multi mode is enabled), in the
Multi mode, this indication is determined by selecting the Part in the Mixer section.
2 Control Source (Controller)
Indicates the six controllers as source of the Controller Set. The abbreviations for the Controllers are as
follows:
3 On/Off status
When a lamp is turned on, a certain function (Destination) is assigned to the corresponding Source
(controller). When a lamp is turned off, no function (Destination) is assigned to the corresponding Source
(controller).
Indication Control Source Indication Control Source
PB Pitch Bend Wheel BC Breath Controller
MW Modulation Wheel AS1 ASSIGN 1 knob
AT After Touch (keyboard) AS2 ASSIGN 2 knob
FC Foot Controller FC2 Foot Controller 2
FS Foot Switch AF1 ASSIGNABLE FUNCTION 1 button
RB Ribbon Controller AF2 ASSIGNABLE FUNCTION 2 button
1
2
5
7
3
6
4
1
3
2
S90 XS/S70 XS Editor VST Window: Bottom section
S90 XS/S70 XS Editor VST Owner’s Manual
34
2 Quick Setup
From this section, you can instantly call up appropriate settings related to the MIDI parameters.
n The settings of the S90 XS/S70 XS instrument made via the operation here cannot be saved as an Editor file.
You can select a template from 1 – 3. On the S90 XS/S70 XS instrument, this section is the same as the
Quick Setup parameter on the first page of the display called up by selecting "Quick Set" in the Utility
Select display.
n The parameters set via the Quick Setup can be edited on the Hardware Utility window (page 45).
3 Knobs
This section lets you adjust various parameters assigned to the Knobs on the front panel of the S90 XS/
S70 XS instrument.
1 [TONE]/[EG]/[EQ]/[Effect]/[MIC]
Same as the Knob Function buttons on the panel of the S90 XS/S70 XS.
2 Knobs 1 – 4
Same as the four knobs on the panel of the S90 XS/S70 XS.
4 ARP (Arpeggio)
Allows you to change the Arpeggio related setup (on/off status and selecting 1 – 5).
5 MIDI monitor
Turns the MIDI monitor function on or off. By turning this MIDI jack icon on, the note on/off
messages transmitted to the S90 XS/S70 XS will be shown on the virtual keyboard at the bottom
of the Editor window.
n When using the MIDI monitor function, make sure to set the audio ports of the audio interface connected to
the S90 XS/S70 XS instrument on the VSTi Setup window (page 46). The VSTi Setup is not determined, or no
audio device is installed, the MIDI monitor function is limited when no audio port is selected.
6 [A.Func] (Assignable Function) button
This button is related to “all AF off,” “AF1 on” and “AF2 on” selected as a value of the XA Control
parameter on the Oscillator/Pitch window of the Normal Voice Element Edit. For details, refer to the
Owner’s Manual of the S90 XS/S70 XS.
21
S90 XS/S70 XS Editor VST Window: Bottom section
S90 XS/S70 XS Editor VST Owner’s Manual
35
7 Keyboard
Allows you to audition the edited sound. Note on/off messages corresponding to the keys you click or
drag will be transmitted to the external device via the MIDI port specified in the Editor Setup window
(page 41) as the MIDI OUT parameter.
n The velocity when clicking a key is determined by the setting of the Keyboard Velocity parameter (page 43)
in the Setup window.
n When a Drum Voice is edited, you can initialize the parameter settings of each key by right-clicking
(Windows) / <control> key + clicking (Macintosh) on the virtual keyboard. From the menu called up by right-
clicking (Windows) / <control> key + clicking (Macintosh), selecting “Initialize key” will initialize all the
parameter settings except for the waveform assignment of the currently selected drum key, while selecting
“Initialize key (with Wave)” will initialize the all the parameter settings including the waveform assignment.
Basic Operations
S90 XS/S70 XS Editor VST Owner’s Manual
36
Basic Operations
This section covers basic operations of the S90 XS/S70 XS Editor VST.
Naming a Voice
You can assign an original name of your choice to the edited Voice on the VOICE LIBRARY window,
GENERAL window in the Part Common General, and the Store window.
From the VOICE LIBRARY window (page 15), select a User Voice or Mixing Voice then click the selected
Voice so that you can edit the name. After editing the Voice name, pressing the <Enter> key or locating the
cursor to another parameter finalizes the edited name while pressing the <Esc> key aborts it.
From the GENERAL window (below) and Store window (page 50), locate the cursor in the text box of “Voice
Name” at the top of this window, then edit the name in the text box as desired. After editing, pressing the
<Enter> key or locating the cursor to another parameter finalizes the edited name.
Searching for a Voice/Arpeggio Type
You can search for the desired Voice, Multi and Arpeggio type on the VOICE LIBRARY window (page 15),
MULTI LIBRARY window (page 19) and ARP LIBRARY window just by inputting a keyword in the text box at
the bottom of these windows respectively. Likewise, the Search function is available on the Import window
(page 39).
Inputting a numerical value
When double clicking a value box such as that shown above, the value box can be edited and you can input
a numerical value directly by using numeric keys. After editing, pressing the <Enter> key or locating the
cursor to another parameter finalizes the value while pressing the <Esc> key aborts it. You can edit the value
also by using the Cursor key or <Page Up>/<Page Down> key after clicking this box.
In Windows, to reset the value to its default, simultaneously hold down the <Ctrl> key and click on the value
box. On the Macintosh, to reset the value to its default, simultaneously hold down the Command key and
click on the value box.
n For certain parameters, the value can be edited only by using the mouse and cannot be input directly by using the
numeric keys.
Basic Operations
S90 XS/S70 XS Editor VST Owner’s Manual
37
Selecting a value
Clicking inside the value box like such as that shown above calls up the list box, from which you can select
the desired value. You can also select the value also by clicking the arrow at right end of this box.
Using a knob
Dragging or clicking the knob such as that shown above changes the value of the corresponding parameter.
After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you
want to make fine adjustments to the value, drag the mouse while holding the <Shift> key.
The specific operation of the knob is determined by the settings of the Knob Guide parameter and Knob
Mouse Control parameter in the Setup window (page 41). In Windows, to reset the value to its default,
simultaneously hold down the <Ctrl> key and click on the knob. On the Macintosh, to reset the value to its
default, simultaneously hold down the Command key and click on the knob.
Using a slider
Dragging or clicking the slider such as that shown above changes the value of the corresponding parameter.
After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you
want to make fine adjustments to the value, drag the mouse while holding the <Shift> key.
The specific operation of the slider is determined by the setting of the Slider Mouse Control parameter in the
Setup window (page 41). In Windows, to reset the value to its default, simultaneously hold down the <Ctrl>
key and click on the slider. On the Macintosh, to reset the value to its default, simultaneously hold down the
Command key and click on the slider.
Using a graph
Dragging one of the boxes in the graph (as shown above) changes the value of the corresponding parameter.
In Windows, simultaneously hold down the <Ctrl> key and click on the box to reset the corresponding value
to the default setting. To reset the entire graph and its values to the default setting, simultaneously hold down
the <Ctrl> key and click on any section in the graph (other than one of the boxes) to reset the entire graph
and its values to the default setting. On the Macintosh, simultaneously hold down the Command key and
click on the box to reset the corresponding value to the default setting. To reset the entire graph and its
values to the default setting, simultaneously hold down the Command key and click on any section in the
graph (other than one of the boxes) to reset the entire graph and its values to the default setting.
Menu: [File] menu
S90 XS/S70 XS Editor VST Owner’s Manual
38
Menu
[File] menu
New
Creates and opens a new file containing the default Mixing setup and Voice data.
Open...
Opens an already saved file of the S90 XS/S70 XS Editor VST. The following file types can be selected and
opened.
S90 XS/S70 XS Editor (.X2E)
S90 ES Multi Part Editor (.M6E)
S90 XS/S70 XS All Files (.X2A)
CAUTION
Unlike files of other applications such as word processors, only a single file can be opened and edited on the S90 XS/S70 XS Editor VST.
Before opening a new file, make sure to save the edited settings as a file to avoid losing data.
Save
Saves the current settings by overwriting the current file.
Save As...
Saves the current settings as a S90 XS/S70 XS Editor file (.X2E) under a new or different name.
Menu: [File] menu
S90 XS/S70 XS Editor VST Owner’s Manual
39
Import
Imports the Voice data (a specific Voice in a specific folder or all Voices in a specific folder) from a different
file to the current file.
Click the File Select button (3), select a file including your desired Voice(s) so that the folders in the selected
file are listed as the Source Voice list (8), select a Voice or Voices or a folder or folders in the list (8), select
a destination location in the Destination Voice list (9) of the current file, then click [Import] (5) to execute the
Import operation.
The following file types can be selected.
S90 XS/S70 XS Editor (.X2E)
MOTIF XS Editor (.X0E)
MOTIF-RACK XS Editor (.X1E)
S90 ES Voice Editor (.S7E)
S90 ES Multi Part Editor (.M6E)
S90 XS/S70 XS All (.X2A)
S90 XS/S70 XS All Voice (.X2V)
MOTIF XS All (.X0A)
MOTIF XS All Voice (.X0V)
1 [X] (Close) button
Click this to close this window without importing.
2 File name (Indication only)
Indicates the currently selected file.
3 File selection button
Click this to open the dialog for file selection.
4 [Category]/[Bank] checkboxes
Click either of these boxes to determine whether the Voices in the Source Voice list (8) are divided into
Categories or Banks.
1
2
3
4
56
7
6
9
7
8
)
Menu: [File] menu
S90 XS/S70 XS Editor VST Owner’s Manual
40
5 [Import] button
Click this to actually import the Voice(s) selected in the Source Voice list (8) to the specified location in
the Destination Voice list (9).
n You can also import Voice data without the use of this button by dragging the desired Voice or folder from the
Source Voice list then dropping it to the Destination Voice list.
n A Normal Voice cannot be imported to the User Drum Voice Bank. Likewise, a Drum Voice cannot be
imported to the User Normal Voice Bank. No Voices can be imported to the Preset Voice Bank.
6 [+]/[–] buttons
Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to
close all folders.
7 Folder button (Bank or Category)
Double click here to open or close the folder.
8 Source Voice list
Indicates the Voices or folders of the selected file to be imported.
By right-clicking (Windows) / <control> key + clicking (Macintosh) this section and selecting a menu,
you can perform the following functions.
Opening/Closing all the folders
Determining whether the Voices listed here are divided into Category folders or Bank folders
9 Destination Voice list
Indicates the Voices or folders currently edited on the S90 XS/S70 XS Editor VST.
n By right-clicking (Windows) / <control> key + clicking (Macintosh) this section and selecting a menu, you
can open or close all the folders.
) Search box
You can search for your desired Voice from the Source Voice list (8) by inputting a keyword here.
Menu: [File] menu
S90 XS/S70 XS Editor VST Owner’s Manual
41
Setup
Determines the basic setup of the S90 XS/S70 XS Editor VST. After setting necessary parameters, click [OK]
to actually apply the settings to the S90 XS/S70 XS Editor VST.
1 [X] (Close) button
Click this to close this window without applying the settings. This button is the same as the [Cancel]
button (#).
2 [Detail] button
You can make detailed settings for the Input Port and Output Port by setting this button to “On.” This
setting is necessary if the Port name is changed on a computer.
3 MIDI
Set the MIDI Port for communication between the S90 XS/S70 XS Editor VST and the S90 XS/S70 XS
instrument. When the [Detail] button (2) is set to “Off,” select a value such as “S90 XS” or “S70 XS” at
the “USB Device” column. When the [Detail] button (2) is set to “On,” select Port 4 for the S90 XS/S70
XS in the MIDI In setting, then select Port 1 and Port 4 for the S90 XS/S70 XS in the MIDI Out settings.
n When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the previously
used Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the DAW
application.
n Keep in mind that setup on the DAW application is necessary before making settings here.
n Make sure to set the MIDI IN/OUT parameter to “USB” in the MIDI display of the Utility mode on the S90 XS/
S70 XS instrument.
4 Device No.
Set the Device number to the same as the value specified in the MIDI display of the Utility mode on the
S90 XS/S70 XS itself. When the Device number on the S90 XS/S70 XS is set to “All,” set the Device No.
here to “1.”
1
3
4
5
6
2
7
8
9 !
)
@
#
Menu: [File] menu
S90 XS/S70 XS Editor VST Owner’s Manual
42
5 Auto Sync Setting
This section lets you set how the data synchronization between the S90 XS/S70 XS Editor VST and the
S90 XS/S70 XS instrument is executed when “OFFLINE” is changed to “ONLINE.” Actual data
synchronization is executed from the Auto Sync window (page 54) called up automatically under certain
circumstances such as clicking the [OFFLINE] button, starting the S90 XS/S70 XS Editor VST and
opening a new file on the Editor.
Global
Determines whether or not the Global data (see page 3) is synchronized and which data (S90 XS/S70 XS
Editor VST or S90 XS/S70 XS itself) is synchronized with the other.
Current
Determines whether or not the Current data (see page 3) is synchronized and which data (S90 XS/S70
XS Editor VST or S90 XS/S70 XS itself) is synchronized with the other.
Voice
Determines whether or not the Voice data (see page 3) is synchronized and which data (S90 XS/S70 XS
Editor VST or S90 XS/S70 XS itself) is synchronized with the other.
Auto Start
When this is set to “On” and one of the following operations is executed, data synchronization will be
started automatically as soon as the Auto Sync window is opened.
When clicking “OFFLINE” after setting the MIDI IN/OUT parameter correctly in the Utility mode on the
S90 XS/S70 XS, setting the MIDI Ports correctly on the computer, and making a proper connection.
When the connection between the S90 XS/S70 XS and a computer are corrected after appropriately
correcting the setup of the S90 XS/S70 XS and the computer.
When the settings on the S90 XS/S70 XS instrument and the computer are corrected after
appropriately reconnecting the devices.
When the settings on the S90 XS/S70 XS instrument and the computer are corrected after
appropriately launching the S90 XS/S70 XS Editor VST.
n The parameters set here apply also to the parameters having the same names in the Auto Sync window.
CAUTION
When the Auto Start parameter is set to “On, data synchronization is started automatically under certain circumstances
(page 54) such as clicking the [OFFLINE] button, starting the Editor and opening a new file on the Editor. Keep in mind that
this will cause unexpected data loss on the S90 XS/S70 XS Editor VST or the S90 XS/S70 XS itself, since new data
automatically overwrites old data upon data synchronization. Make sure to save your important data before using the S90
XS/S70 XS Editor VST.
6 Knob Guide
Determines whether or not the Knob Guide (knob editing area) appears when adjusting a knob. Setting
this to On conveniently enlarges the knob editing area (as shown), making it much easier to edit a knob’s
parameter.
Knob Guide: On Knob Guide: Off
Menu: [File] menu
S90 XS/S70 XS Editor VST Owner’s Manual
43
7 Knob Mouse Control
Determines how the knob illustrated at right responds to
your mouse control.
Circular
When this is selected, you can jump to a specific value by clicking at a point within the Knob editing
area. You can edit the value also by dragging the mouse in a circular direction—in much the same way
as turning an actual knob.
Relative Circular
When this is selected, you can edit the value by dragging the mouse in a circular direction—in much the
same way as turning an actual knob.
Linear
When this is selected, you can edit the value by dragging any point in the knob editing area (the mouse
pointer disappears) and moving it vertically or horizontally—in much the same way as operating a slider.
8 Slider Mouse Control
Determines how the Slider illustrated at right responds to your
mouse control.
Jump
When this is selected, clicking any location in the slider jumps the slider pointer to that location.
Touch
When this is selected, you can edit the value by dragging and moving the slider pointer horizontally—in
much the same way as operating an actual slider. Clicking at any location in the slider (other than the
orange pointers) does not affect the slider.
Ramp
When this is selected, clicking at any location in the slider (other than the orange pointers) moves the
nearest pointer to that location. Dragging any point in the slider moves the slider pointer accordingly.
Relative
When this is selected, you can edit the value by dragging any point (the mouse pointer disappears) and
moving it horizontally.
9 Keyboard Velocity
Determines the Velocity value generated when clicking any note on the virtual keyboard at the bottom of
the Editor window. When “Fix” is turned on, clicking any key generates the same velocity value which
can be specified in the box at right of “Fix.” When “Free” is turned on, the generated Velocity value
differs depending on the click location. The lower on the key graphic you click, the higher the Velocity.
Menu: [File] menu
S90 XS/S70 XS Editor VST Owner’s Manual
44
) Inc/Dec Action
Determines how the triangular buttons ([]/[]/[L]/[M]) located at the parameter boxes as illustrated
below work.
Inc/Inc:
When this is selected, clicking the [] button increases the value by 1 while clicking the [L] button
moves the cursor downward by one item.
Inc/Dec:
When this is selected, clicking the [] button increases the value by 1 while clicking the [L] button
moves the cursor upward by one item.
Dec/Inc:
When this is selected, clicking the [] button decreases the value by 1 while clicking the [L] button
moves the cursor downward by one item.
Dec/Dec:
When this is selected, clicking the [] button decreases the value by 1 while clicking the [L] button
moves the cursor upward by one item.
! Startup Mode
This section lets you set the startup mode when launching the S90 XS/S70 XS Editor VST.
Voice
The editor will start in the Voice mode.
Multi
The editor will start in the Multi mode.
n When using Cubase 5.0.1 or later, if the S90 XS/S70 XS Editor VST is opened from the Instrument Track or the
Media Bay window, the editor will start in the Voice mode.
@ [OK] button
Click this to actually apply the settings to the S90 XS/S70 XS Editor VST and close the Setup window.
# [Cancel] button
Click this to close the Setup window without applying the settings to the S90 XS/S70 XS Editor VST.
Menu: [File] menu
S90 XS/S70 XS Editor VST Owner’s Manual
45
Hardware Utility
From the Hardware Utility window called up by selecting this menu, you can make the settings related to the
parameters in the Utility mode of the S90 XS/S70 XS. Editing the parameter on this window will affect the
parameter having the same name of the S90 XS/S70 XS instrument. After making the settings, click [Store] at
the bottom of this window to store the settings as Global data.
S90 XS/S70 XS Editor VST
(parameters on the above window)
S90 XS/S70 XS instrument
1 Tone Note Shift [UTILITY] General Note Shift
Tune [UTILITY] General Tune
2 Auto Load Setup Power On Mode [UTILITY] General Power On Mode
3 MIDI Channel Basic Receive Ch [UTILITY] MIDI Basic Receive Ch
Basic Transmit Ch [UTILITY] MIDI Keyboard Transmit Ch
4 MIDI Sync MIDI Sync [UTILITY] MIDI MIDI Sync
Clock Out [UTILITY] MIDI Clock Out
5 MIDI Switch Bank Select [UTILITY] MIDI Bank Select Sw
Program Change [UTILITY] MIDI Prg Change Sw
Local Control [UTILITY] MIDI Local Control
6 MIDI Other Controller Reset [UTILITY] MIDI Controller Reset
7 Quick Setup 1, 2, 3 [UTILITY] Quick Set Quick Setup
1
5
6
7
4
2
3
Menu: [File] menu
S90 XS/S70 XS Editor VST Owner’s Manual
46
VSTi Setup
This determines the setup of the audio routing from the S90 XS/S70 XS instrument to the DAW application via
the VSTi Setup window in the menu of the S90 XS/S70 XS Editor VST.
All connections of the audio ports will be cleared when clicking the [Clear] button.
Select the audio ports of the audio interface to which the S90 XS/S70 XS instrument is connected.
n When the VSTi Setup is not determined, or no audio device is installed, an error message appears on the S90 XS/S70 XS
Editor VST. The follow functions are limited when no audio port is selected.
Automation
Keyboard (page 35)
Make sure to set the audio ports of the audio interface connected to the S90 XS/S70 XS instrument on the VSTi Setup
window.
Menu: [Edit] menu
S90 XS/S70 XS Editor VST Owner’s Manual
47
[Edit] menu
Undo
Cancels the changes you made in your most recent editing. [Undo] menu will be black and cannot be
selected depending on the most recent edited parameter.
Redo
Redo is available only after using Undo, and lets you restore the changes you made before undoing them.
Copy
Copies the selected items such as characters of the Voice name in the text box, Voice(s) in the VOICE
LIBRARY window and entire Part setup to the clipboard.
Paste
Pastes the Voice(s), entire Part setup, and characters from the clipboard to the specified location.
Initialize Current Voice (in the Voice mode)/Initialize Current Part Voice (in the Multi
mode)
In the Voice mode, select [Initialize Current Voice] under [Edit] to call up the Initialize Current Voice window
from which you can initialize the current Voice by clicking [Start]. In the Multi mode, select [Initialize Current
Part Voice] under [Edit] to call up the Initialize Current Part Voice window from which you can initialize the
Voice assigned to the current Part by clicking [Start].
When a Normal Voice is edited:
Voice mode Multi mode
1
5
6
4
2
3
Menu: [Edit] menu
S90 XS/S70 XS Editor VST Owner’s Manual
48
When a Drum Voice is edited:
1 [X] (Close) button
Click this to close the window without executing Initialization.
2 [All]/[Clear] button
Clicking [All] turns all the checkboxes in this window on while clicking [Clear] turns them off.
3 [Common] checkbox
When this is turned on, clicking [Start] initializes the settings of all the Common parameters (Voice
Common parameters when the Editor is set to the Voice mode or Part Common parameters when the
Editor is set to the Multi mode).
4 with Wave Assignment
When this is turned on, clicking [Start] initializes the Waveform assignment for all Elements of the current
Voice.
5 Element [1] – [8] or Drum Key C0 – C6 checkboxes
When a Normal Voice is edited, clicking [Start] initializes the settings of all parameters for the Elements
which are turned on here. When a Drum Voice is edited, clicking [Start] initializes the settings of all
parameters for the drum keys which are turned on here.
6 [Start] button
After the setup is completed, click [Start] to initialize the parameter settings and close the window.
1
5
6
4
2
3
Menu: [Edit] menu
S90 XS/S70 XS Editor VST Owner’s Manual
49
Initialize Current Mixing (only in the Multi mode)
Select this menu to call up the Initialize Current Mixing window, set the parameters as necessary, then click
[Start] to initialize the Mixing data.
1 [X] (Close) button
Click this to close the window without executing Initialization.
2 [All]/[Clear] button
Clicking [All] turns all the check boxes in this window on while clicking [Clear] turns them off.
3 [Multi Common] checkbox
When this is turned on, clicking [Start] initializes the settings of all the Multi Common parameters.
4 Initialize Template
The following templates for initializing are available.
Normal:
When this is selected, clicking [Start] initializes the Editor Setup to the normal default settings.
GM:
When this is selected, clicking [Start] initializes the Editor Setup so that the S90 XS/S70 XS can be used
as a GM tone generator.
Contemporary R&B – TurkishPop:
When one of these templates is selected, clicking [Start] initializes the Editor Setup so that the S90 XS/
S70 XS can be used as a tone generator which matches the name of the selected template.
5 Part [1] – [16] checkboxes
Clicking [Start] initializes the settings of all parameters for the Parts which are turned on here.
6 [AD] checkbox
When this is turned on, clicking [Start] initializes the settings of all parameters for the A/D Part.
7 [Start] button
After setup is completed, click [Start] to initialize the Mixing setup and close the window.
1
5
7
4
2
3
6
Menu: [Edit] menu
S90 XS/S70 XS Editor VST Owner’s Manual
50
Store Global
Simply selecting this menu will store the Global settings. The Global settings will be stored only to the internal
memory of the S90 XS/S70 XS instrument.
Store Voice
From the window selected via this menu, you can store the edited Voice. The current Voice is stored in the
Voice mode while the Voice assigned to the current Part is stored in the Multi mode. Select the desired Bank
folder (5), select the number of the destination Voice (6), input the Voice name (2), then click the [Store]
button to store the Voice as a User Voice or Mixing Voice (available only in the Multi mode).
1 [X] (Close) button
Click this to close this window without executing the Store operation.
2 Voice Name
Enter an original name for the Voice to be stored.
3 [Store] button
Click this to store the edited Voice to the specified Bank and number.
CAUTION
Like other parameters, the Voice data is synchronized with the S90 XS/S70 XS instrument when ONLINE (page 13) is
indicated. This means that clicking [Store] in this window stores the edited Voice to the corresponding Bank in the internal
memory of the S90 XS/S70 XS instrument. Be careful not to overwrite any important data.
4 [+]/[–] buttons
Pressing the [+] button opens all the Bank folders, while pressing the [–] button closes them.
1
4
5
6
23
Menu: [Edit] menu
S90 XS/S70 XS Editor VST Owner’s Manual
51
5 Bank folder
This section indicates the following Banks to which you can store the edited Voice.
• Normal User 1
• Normal User 2
• Normal User 3
• Normal User 4
• Drum User
• Mixing
Clicking on each Bank folder opens it and all the Voices stored in the Bank appear as illustrated above
(from the left illustration to the right one). When clicking the Bank folder again, it closes as illustrated
above (from the right illustration to the left one).
Note that the indicated Bank differs depending on the current mode and current Voice type. The Mixing
Bank is shown only in the Multi mode. The Drum User Bank is shown only when the Drum Voice is
selected (in the Voice mode) or the Drum Voice is assigned to the current Part (in the Multi mode).
Likewise, the Normal User Bank is shown only when the Normal Voice is selected (in the Voice mode) or
the Normal Voice is assigned to the current Part (in the Multi mode).
6 Voices
The Voices in the selected Bank are listed. Before clicking the [Store] button, you need to select the
number of the destination Voice here. Right-clicking (Windows) / <control> key + clicking (Macintosh) on
this section calls up the menus “All Open” and “All Close,” letting you open or close all the Bank folders.
Store Mixing (only in the Multi mode)
This menu lets you store the Mixing settings in the Multi mode. Select the desired Multi number and enter the
desired name, then click the [Store] button to store the Mixing settings to internal memory (overwritten to the
currently selected Multi) of the S90 XS/S70 XS instrument.
Voice Compare
This menu lets you switch between the just-edited Voice and its original, unedited condition, allowing you to
hear how your edits affect the sound. Select “Voice Compare” to enter the Voice Compare mode. In this
mode, you can hear the sound of the original Voice and none of the parameters in the window can be edited.
Select “Voice Compare” again to return to the original status.
n The status of the S90 XS/S70 XS instrument is maintained even if you enable the Voice Compare mode on the S90 XS/
S70 XS Editor VST.
Mixing Compare (only in the Multi mode)
This menu lets you switch between the just-edited Mixing and its original, unedited condition, allowing you to
hear how your edits affect the sound. Select “Mixing Compare” to enter the Mixing Compare mode. In this
mode, you can hear the sound of the original Mixing setup and none of the parameters in the window can be
edited. Select “Mixing Compare” again to return to the original status.
n The status of the S90 XS/S70 XS instrument is maintained even if you enable the Mixing Compare mode on the S90 XS/
S70 XS Editor VST.
Menu: [Bulk] menu
S90 XS/S70 XS Editor VST Owner’s Manual
52
[Bulk] menu
Data Sync
Select this menu to call up the Data Sync window, set the parameters as necessary, then click [Start] to
transmit the specified data from/to the S90 XS/S70 XS Editor VST to/from the S90 XS/S70 XS instrument.
1 [X] (Close) button
Click this to close this window without executing Data Sync.
2 [Transmit]/[Receive] checkboxes
Determines whether the S90 XS/S70 XS Editor VST transmits data to the S90 XS/S70 XS or receives data
from the S90 XS/S70 XS.
[Transmit] checkbox:
When this is checked, clicking [Start] button transmits data from the Editor to the instrument.
[Receive] checkbox:
When this is checked, clicking [Start] button transmits data from the instrument to the Editor.
3 Data type to be transmitted/received
Here, you can set which data type is to be transmitted or received. Clicking the [All] button turns all the
data types on while clicking the [Clear] button turns all the data types off.
Current
Turn this on then click the [Start] button to transmit or receive the Current settings.
Global
Turn this on then click the [Start] button to transmit or receive the Global settings.
Preset (Favorites)
Turn this on then click the [Start] button to transmit or receive the Favorites-related settings of the Preset
Voice(s).
Normal User 1 – 4
Turn this on then click the [Start] button to transmit or receive the data of the Normal User Voice Bank
1, 2, 3, and 4 respectively.
Drum User
Turn this on then click the [Start] button to transmit or receive the data of the Drum User Voice Bank.
1
3
5 6
2
4
Menu: [Help] menu
S90 XS/S70 XS Editor VST Owner’s Manual
53
4 Progress Bar
Shows how much of the data has been transmitted.
5 [Start] button
After setup is completed, click the [Start] button to actually execute data transmission.
6 [Stop] button
This button is available only when data transmission is being executed and allows you to cancel the
transmission.
[Help] menu
Manual
Selecting this menu calls up this manual in PDF format.
About
Selecting this menu calls up information such as the version number of the S90 XS/S70 XS Editor VST.
Menu
S90 XS/S70 XS Editor VST Owner’s Manual
54
Auto Sync window
This window is used for changing the status of the Editor from “OFFLINE” to “ONLINE.” While editing a parameter
on the Editor affects the same parameter on the S90 XS/S70 XS instrument and vice versa in the Online status, you
can disable the “mirroring” of parameter changes between the devices by switching to Offline status. The Auto
Sync window can be called up by clicking “OFFLINE” on the Editor window when the Editor is in the Offline status.
The Auto Sync window can also be called up automatically (without clicking “OFFLINE”) under the following
circumstances:
When opening a file.
When creating a new file by selecting “New” under the File menu.
When changing the mode on the Editor in the Online status of the Editor.
When changing the mode on the S90 XS/S70 XS instrument in the Online status of the Editor.
When the connection between the S90 XS/S70 XS and a computer are corrected after appropriately correcting
the setup of the S90 XS/S70 XS and the computer.
When the settings on the S90 XS/S70 XS instrument and the computer are corrected after appropriately
reconnecting the devices.
n If the Auto Start parameter is set to “On” in the Auto Sync window, data synchronization may be started automatically as
soon as the Auto Sync window is opened in certain conditions. For details, see page 42.
On the Auto Sync window, set the Data Port properly then click [Start] button to execute data synchronization. As
soon as the data synchronization is completed, the Auto Sync window is closed then the OFFLINE indication
changes to ONLINE automatically.
1 [X] (Close) button
Click this to close this window without executing data synchronization.
2 [Detail] button
3 Port
4 Device No.
5 Auto Sync Setting
These parameters are same as in the Setup window. See page 41.
6 Progress Bar
7 [Start] button
8 [Stop] button
These parameters are same as in the Data Sync window. See page 53.
1
4
5
6
7
3
2
8
Troubleshooting
S90 XS/S70 XS Editor VST Owner’s Manual
55
Troubleshooting
If you encounter problems such as no sound output or abnormal behavior, verify the connections before
checking the following.
Sound does not change when using the knobs or sliders.
Is “ONLINE” indicated on the Editor window?
Is the lamp at left of “ONLINE” indicator turned on?
If it is turned off, the settings related to communication between the S90 XS/S70 XS and a
computer may be wrong. Check the MIDI Port setting (page 41) on the S90 XS/S70 XS Editor
VST, the MIDI IN/OUT parameter setting in the MIDI display of the Utility mode on the S90 XS/S70
XS instrument, or the cable connection between the S90 XS/S70 XS and the computer.
Check the MIDI Port setting and Device No. setting. (page 41)
Bulk data is not transmitted/received successfully.
Check the same points as above such as “ONLINE” indication and MIDI Port settings.
The appropriate Port is not shown in the Setup window.
The MIDI Port in the Setup window can be selected from the Ports specified in the DAW
application. Check the MIDI Port settings in the DAW application.
When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the
previously used Port cannot be found or some Ports are not set properly. Check the MIDI Port
settings in the DAW application.
“No Audio Port Connection” error message appears.
Set up the audio ports of your audio interface connected to the S90 XS/S70 XS in the VSTi Setup
window (page 46).
The sounds of the S90 XS/S70 XS do not come to the Audio Mixer in the DAW
application.
Set up the audio ports of your audio interface connected to the S90 XS/S70 XS in the VSTi Setup
window (page 46).
The multi port audio from S90 XS/S70 XS does not come to the DAW application.
Refer to “Starting the S90 XS/S70 XS Editor VST” (page 4).
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
©2009 Yamaha Corporation
905MW-A0

Documenttranscriptie

S90 XS/S70 XS Editor VST Owner’s Manual Contents What is the S90 XS/S70 XS Editor VST? ................................2 Data Structure of the S90 XS/S70 XS Editor VST ..................3 Starting the S90 XS/S70 XS Editor VST..................................4 An Example of S90 XS/S70 XS Editor VST in Use .................7 S90 XS/S70 XS Editor VST Window ......................................13 Basic Operations....................................................................36 Menu ........................................................................................38 Troubleshooting .....................................................................55 • Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. • The software and this owner’s manual are exclusive copyrights of Yamaha Corporation. • Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. • Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. • The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer. • The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective companies. • Click on the red-colored text to jump to the related item in this manual. This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operations. If you are not, please refer to the owner’s manual which came with your Windows/Macintosh software before using the S90 XS/S70 XS Editor VST. For information about hardware requirements, the interconnection of devices and the installation of the S90 XS/S70 XS Editor VST software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective MIDI device. © 2009 Yamaha Corporation. All rights reserved. S90 XS/S70 XS Editor VST Owner’s Manual 1 What is the S90 XS/S70 XS Editor VST? What is the S90 XS/S70 XS Editor VST? S90 XS/S70 XS Editor VST is a convenient tool which lets you edit and save the various parameters of your S90 XS/S70 XS Music Synthesizer. These include Voice and Mixing parameters (edited in the Voice or Multi mode of the S90 XS/S70 XS) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-tounderstand graphical interface, you can edit various parameters of the S90 XS/S70 XS right from your computer—using the mouse to adjust the virtual knobs, sliders, and buttons and entering values from the computer keyboard. Finally, all the changes you have made can be saved to your computer or transmitted to the S90 XS/S70 XS instrument. The S90 XS/S70 XS Editor VST, based on the “VST3 technology” by Steinberg, works as a VST3 plug-in with Cubase series 4.5 or later (DAW application). The S90 XS/S70 XS Editor VST also works as the same way as other VST instrument software, allowing you to save the edited settings of the S90 XS/S70 XS, or use them for another project. In addition, you can handle the S90 XS/S70 XS Voices in the Media Bay window in Cubase when using the S90 XS/S70 XS Editor VST with Cubase 4.5 or later, allowing you to search for, listen, and play the S90 XS/S70 XS Voices within Media Bay in Cubase. The S90 XS/S70 XS Editor VST provides a comprehensive and seamless music production environment—making the use of hardware and software both easier and much more efficient. S90 XS/S70 XS Editor VST Owner’s Manual 2 Data Structure of the S90 XS/S70 XS Editor VST Data Structure of the S90 XS/S70 XS Editor VST The S90 XS/S70 XS Editor VST lets you create the following data and save them as a single file (extension: .X2E). • • • • Global data (latest status of edited global parameters) Current data in the Voice mode (latest status of edited Voice) Current data in the Multi mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices) User Voice data (consisting of four Normal Voice Banks and one Drum Voice Bank) Current settings include the latest settings of the Common and Element parameters for the Voice last assigned to each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The S90 XS/ S70 XS Editor VST lets you edit parameters (including Element parameters) of the Voice assigned to each Part and save the latest edit status as a file without storing it as a User Voice or a Mixing Voice. This means that you can easily recall the latest status of the previous edit simply by opening the file. n The S90 XS/S70 XS Editor VST handles the Global data which includes some of the parameters shown on the “G” row in the Mixer section and all the parameters in the Global Settings of the Parameter Category section (pages 22 and 25). The diagram illustrated below indicates the structure of the data created via the S90 XS/S70 XS Editor VST, the structure of the data stored in the internal memory of the S90 XS/S70 XS instrument and the relationship between those two types of data. Project file of the DAW application (computer) S90 XS/S70 XS Editor VST (VST3 Plug-in) Data sync*1 Global data Store Voice*2 (page 50) Current data in the Voice mode Data sync*1 User Voice data • Normal User 1 (128 Voices) • Normal User 2 (128 Voices) • Normal User 3 (128 Voices) • Normal User 4 (128 Voices) • Drum User (32 Voices) Current data in the Multi mode • Multi Common data Editor file (Extension: .X2E) Store Voice*2 (page 50) Part Voice data (16 Voices) Store Voice*2 (page 50) Mixing Voice data (16 Voices) S90 XS/S70 XS instrument Store Global*3 (page 50) Global data Current data in the Voice mode Current data in the Multi mode Global data Store Voice*2 (page 50) Store Voice*2 (page 50) • Multi Common data Data sync*1 Part Voice data Store Mixing*3 (page 51) User Voice data • Normal User 1 (128 Voices) • Normal User 2 (128 Voices) • Normal User 3 (128 Voices) • Normal User 4 (128 Voices) • Drum User (32 Voices) Mixing data • Multi Common data (16 Voices) Store Voice*2 (page 50) Mixing Voice data (16 Voices) *1 When the S90 XS/S70 XS instrument is connected to the computer properly with the ONLINE status, editing a parameter on the S90 XS/S70 XS Editor VST affects the same parameter on the S90 XS/S70 XS itself, and vice versa. *2 The Store Voice operation on the Editor will store the Voice data to the memory of the S90 XS/S70 XS instrument as well as the memory of the Editor. *3 The Store Global operation and Store Mixing operation will store the data only to the memory of the S90 XS/S70 XS instrument. S90 XS/S70 XS Editor VST Owner’s Manual 3 Starting the S90 XS/S70 XS Editor VST Starting the S90 XS/S70 XS Editor VST Install the USB-MIDI Driver, and S90 XS/S70 XS Editor VST by following the respective Installation Guides. After making the required connection and setting the MIDI IN/OUT parameter to “USB” in the Utility mode, follow the instructions below to start the S90 XS/S70 XS Editor VST. This example describes the operation steps for Cubase 4.5 with the device connected to a computer via a USB cable. n For details about connection between the S90 XS/S70 XS and a computer, refer to the Owner’s Manual of the S90 XS/ S70 XS. n If you want to use audio signals from the S90 XS/S70 XS instrument on the DAW application, make sure to connect the OUTPUT jacks or ASSIGNABLE OUTPUT jacks of the S90 XS/S70 XS to your audio interface. n On Windows Vista, make sure to remove the checkmark of Port 4 at the "All MIDI Input" section in the [Device] menu → [Device Setup]. 1. Open the VST Instrument window via [Devices] ➞ [VST Instruments] in the DAW application menu. 2. Click the Instrument Slot in the VST Instrument Rack, then select [External] ➞ [S90 XS/ S70 XS VST]. 3. When the dialog box asking “Do you want to create a MIDI track assigned to plug-in “S90 XS/S70 XS VST”?” appears, click [Create]. A MIDI track will be created and the S90 XS/S70 XS Editor VST window will appear. S90 XS/S70 XS Editor VST Owner’s Manual 4 Starting the S90 XS/S70 XS Editor VST 4. Click the Output Setup button at the right side of the Edit button ( ) in the VST Instrument Rack, then verify that “S90/S70 XS 1 [stereo] is selected. If you want to use the ASSIGNABLE OUTPUT L/R jacks for Cubase project, also check (enable) “S90/S70 XS 2 [stereo].” After this operation, the S90 XS/S70 XS Busses appear in the project window of the DAW application. 5. Call up the Editor Setup window in the S90 XS/S70 XS Editor VST via [File] ➞ [Editor Setup]. 6. Set the “Detail” column to “off” at the USB in the Data Port section. 7. Select “S90 XS/S70 XS” at the [USB Device] column. 8. Click [OK] button at the bottom. 9. Call up the VSTi Setup window in the S90 XS/S70 XS Editor VST via [File] ➞ [VSTi Setup]. 10. Set signal input ports of your audio interface that is connected with the S90 XS/S70 XS in the Audio Return Ports column. 11. Click the [OK] button at the bottom. 12. If the S90 XS/S70 XS Editor VST is “OFFLINE,” click the [ONLINE/OFFLINE] button to go “ONLINE.” S90 XS/S70 XS Editor VST Owner’s Manual 5 Starting the S90 XS/S70 XS Editor VST 13. In Quick Set Up, select [1] or [2]. n For more details about MIDI button group in the Quick Set Up, refer to the Owner’s Manual of the S90 XS/S70 XS instrument. n Step 5 through 11 are required when starting S90 XS/S70 XS Editor VST for the first time. These steps are saved in the editor and do not need to be repeated each time it is started. n The S90 XS/S70 XS Editor VST launch procedure is the same as for other VST instruments. Refer to the manual supplied with your DAW application for information on other launch procedure. S90 XS/S70 XS Editor VST Owner’s Manual 6 An Example of S90 XS/S70 XS Editor VST in Use An Example of S90 XS/S70 XS Editor VST in Use There is no single way to use the many components in the S90 XS/S70 XS Editor VST. Your editing needs and preferences may differ; however, the following example gives you a simple step-by-step guide in how to use the S90 XS/S70 XS Editor VST. As an example, this section explains how to edit a Voice in the Voice mode, edit a Mixing program in the Multi mode, then store the edited data to the memory of the S90 XS/S70 XS instrument and save the final results of your editing to a file. n If the [Multi] indication (at the top left of the display) is on, perform the instructions below from step 1. If the [Voice] indication is on, perform the instructions below from step 2. 1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left of the display). If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you should proceed to step 3. 2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE] indication is set to [OFFLINE]. 3. On the Auto Sync window, set communication-related parameters such as Input Port, Output Port and Device Number in the Data Port section, then set the direction of Data Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section. When you want to use the settings on the S90 XS/S70 XS itself as starting data for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to the computer. To use the settings on the S90 XS/S70 XS Editor VST as starting data, set both Global, Current and Voice to the opposite, so that the arrow indicates data flow from the computer to the instrument. For details, see page 41. CAUTION Keep in mind that when you set Global, Current and Voice to On, enable data sync from the computer to the S90 XS/S70 XS (instrument), and then click the [Start] button at the bottom, this operation transmits these types of data currently on the Editor to the S90 XS/S70 XS itself, automatically overwriting and erasing all the corresponding data already existing on memory of the S90 XS/S70 XS instrument. When you want to use the settings on the S90 XS/S70 XS itself as starting data for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to the computer. CAUTION Make sure to set the desired data transfer direction in order to avoid data loss. S90 XS/S70 XS Editor VST Owner’s Manual 7 An Example of S90 XS/S70 XS Editor VST in Use 4. From the Auto Sync window, click [Start] at the bottom. The data synchronization will be started if the Port settings are correct. As soon as data synchronization is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE indication automatically. In this ONLINE status, editing a parameter on the S90 XS/S70 XS Editor VST affects the same parameter on the S90 XS/S70 XS itself, and vice versa. 5. Edit the Voice in the Voice mode. 5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the VOICE LIBRARY window. 5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to the current Part. You can confirm the sound of the selected Voice by clicking any note on the virtual keyboard or the S90 XS/S70 XS keyboard. 5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY window. You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of the window. By executing this operation, the Voice selection is reset to the original status and the VOICE LIBRARY window closes. CAUTION When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store the edits, make sure to store the Voice by using the Store window (page 50) before changing the Voice. S90 XS/S70 XS Editor VST Owner’s Manual 8 An Example of S90 XS/S70 XS Editor VST in Use 5-4 Edit the Voice parameters as desired. Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them. To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the S90 XS/S70 XS keyboard. To make detailed settings of the selected Voice, click the arrow button next to the main window to call up the Detailed Parameter section. at the top of the right panel 6. Store the edited settings as a User Voice, as necessary. 6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 50). 6-2 Select a Voice Bank from the following list: • Normal User 1 • Normal User 2 • Normal User 3 • Normal User 4 • Drum User n Normal User 1 – 4 are shown in the Store window when editing the Normal Voice while Drum User is shown in the Store window when editing the Drum Voice. S90 XS/S70 XS Editor VST Owner’s Manual 9 An Example of S90 XS/S70 XS Editor VST in Use 6-3 Open the selected Bank, select the desired number as destination, then enter the name of the Voice in the box at the top of this window. 6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank. Performing this operation will store the Voice data to the User Voice Bank in the S90 XS/S70 XS instrument as well as that within the Editor. CAUTION When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument) will be overwritten. Select the destination Voice number carefully to prevent important data from being erased accidentally. n You can store the settings of the parameters in the “G” row by clicking [Store Global] under [Edit] in the menu bar. 7. Edit the Mixing parameters in the Multi mode. 7-1 Change the mode to the Multi mode by clicking [Multi] of the [Voice]/[Multi] indication. The Auto Sync appears automatically during ONLINE status. 7-2 From the Auto Sync window, click [Start] at the bottom. Data synchronization will be started if the Port settings are correct. As soon as data synchronization is completed, the Auto Sync window is closed. S90 XS/S70 XS Editor VST Owner’s Manual 10 An Example of S90 XS/S70 XS Editor VST in Use 7-3 On the “G” row of the Global/Multi section, click the Multi name or Voice name to call up the MULTI LIBRARY window. The MULTI LIBRARY lists the Multi programs which are stored in the S90 XS/S70 XS instrument when the S90 XS/S70 XS Editor is in ONLINE status. n The MULTI LIBRARY is not available when the S90 XS/S70 XS Editor is in “OFFLINE” status. You can call up the Multi setup simply by selecting one of these listed template programs. 7-4 From the list in the MULTI LIBRARY, select the desired Multi program to be edited. All the Multi parameters such as the Voice assignment to Part 1 – 16 are set automatically only via this operation. 7-5 Edit the parameters of the Mixing and Voice assigned to each Part. If you want to change the parameter values from the original ones of the selected Multi, click (drag and drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/Multi section and “1” – “16” in the Part section. To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the S90 XS/S70 XS keyboard. To make detailed settings of the selected Multi, click the arrow button next to the main window to call up the Detailed Parameter section. at the top of the right panel n The S90 XS/S70 XS Editor VST lets you edit the Voice parameters in the Multi mode as well as Voice mode. In the Voice mode, you can edit only the selected Voice. In the Multi mode, on the other hand, you can edit the parameters of the Voice assigned to each Part as well as the Mixing parameters. The edited Voice can be stored to the same Voice Bank as a User Voice regardless of the mode used for editing. S90 XS/S70 XS Editor VST Owner’s Manual 11 An Example of S90 XS/S70 XS Editor VST in Use 8. Store the edited Voice or a Multi, as necessary. 8-1 Select the [Store Mixing] under the [Edit] menu to store the edited Multi. n You can also store the edited Multi with the Store operation on the S90 XS/S70 XS instrument. For details, refer to the Owner's Manual of the S90 XS/S70 XS. 8-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in the menu bar to call up the Store window (page 50) then store the Voice via the same operations as in steps 6-1, 6-2, 6-3 and 6-4. 9. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a file (extension: *.X2E). All the settings you made and the Voice data you stored to the User Banks will be saved as a single file (extension: .X2E). When you open this file next time to call up the Auto Sync window, click [Start] to synchronize the status of the parameter settings between the S90 XS/S70 XS Editor VST and the S90 XS/ S70 XS instrument. The S90 XS/S70 XS Editor VST data can be saved into a project file of the DAW application. S90 XS/S70 XS Editor VST Owner’s Manual 12 S90 XS/S70 XS Editor VST Window: Overall section S90 XS/S70 XS Editor VST Window Overall section 1 2 3 1 File, Edit, Bulk, Help Refer to page 38. 2 Voice/Multi mode Determines the mode of the S90 XS/S70 XS, Voice or Multi. As soon as “Voice” or “Multi” is selected here, the mode of the S90 XS/S70 XS instrument changes accordingly and the Auto Sync window (page 54) opens. After setting parameters as necessary on this window, click [Start] to execute data synchronization between the S90 XS/S70 XS Editor VST and the S90 XS/S70 XS instrument. 3 ONLINE/OFFLINE Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is indicated, the edited status is completely synchronized between the S90 XS/S70 XS Editor VST and the S90 XS/S70 XS instrument, meaning that any parameter edit you make on the S90 XS/S70 XS Editor VST is reflected in the same parameter on the S90 XS/S70 XS instrument and vice versa. When OFFLINE is selected, editing on the S90 XS/S70 XS Editor VST will not affect the S90 XS/S70 XS instrument and vice versa even if the S90 XS/S70 XS instrument is connected to a computer. Note that the indication here is automatically changed according to the status of communication between the S90 XS/S70 XS Editor VST and the S90 XS/S70 XS instrument. For example, the ONLINE status changes automatically to OFFLINE when the cable is disconnected accidentally. 1 Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE (2) described below. Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the S90 XS/S70 XS instrument is not properly connected to a computer. 2 This OFFLINE indication shows that the MIDI Port is set properly and the S90 XS/S70 XS is properly connected to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you can synchronize the settings between the S90 XS/S70 XS Editor VST and the S90 XS/S70 XS by clicking the [Start] button. As soon as data synchronization is completed, the Auto Sync window is closed and the status of the Editor changes from OFFLINE to ONLINE. n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync window. 3 This OFFLINE indication shows that the MIDI Port is not set properly or the S90 XS/S70 XS instrument is not connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to connect the S90 XS/S70 XS instrument to a computer, set the MIDI Port properly then click the [Start] button in the Auto Sync window to execute data synchronization between the S90 XS/S70 XS Editor VST and the S90 XS/S70 XS instrument. As soon as data synchronization is completed, the Auto Sync window is closed and the status of the Editor is changed from OFFLINE to ONLINE. S90 XS/S70 XS Editor VST Owner’s Manual 13 S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Voice”) Mixer section (when the Voice/Multi is set to “Voice”) 1 3 2 1 Global This strip lets you edit the main parameters in the Voice mode, such as effect-related ones. Clicking “G” turns this section on as illustrated below. n When editing any of the Global parameters described below, a small square appears at the top right of the “G” box until you save the edited data as a file. This indication is the same as the green [F] indicator (page 27). Before editing After editing Ins.FX (Insertion Effect) Turns the Insertion Effect on or off. Chorus Turns the Chorus on or off and selects the Chorus type. Reverb Turns the Chorus on or off and selects the Reverb type. MFX (Master Effect) Turns the Master Effect on or off and selects the Master Effect type. MEQ Lo, Lo-M, Mid, Hi-M, Hi (Master EQ) Turns the Master EQ on or off and edits the parameters. Volume Adjust the entire volume. 2 [Voice]/[AD Part] tab Selects the Parts to be edited from [Voice] and [AD Part]. The illustration below indicates that the [Voice] tab is active. S90 XS/S70 XS Editor VST Owner’s Manual 14 S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Voice”) 3 Voice When the [Voice] is selected: Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below. n When editing any of the Voice parameters described below, a small square appears at the top right of the “V” box until you save the edited data as a file or you store the edited data as a Voice. This indication is the same as the blue [V] indicator (page 30). Before editing After editing n The MIDI monitor mark is at the left side of the “V” mark. A small red LED lights when MIDI messages are received. Category, Bank, No., Voice Name Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window appears at the right half section, letting you select a different Voice for editing. VOICE LIBRARY 1 2 9 3 4 5 6 7 8 1 Close button Click this to close this window without applying the changes to the S90 XS/S70 XS Editor VST. 2 [Category]/[Bank] checkboxes Click either of these boxes to determine whether the Voices listed here are divided into Category folders or Bank folders. S90 XS/S70 XS Editor VST Owner’s Manual 15 S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Voice”) 3 [+]/[–] buttons Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to close all folders. 4 Folder (Category or Bank) Click each folder to open or close it. 5 Voices Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-anddropping the Voice(s) to a new location. A checkbox exists at left of each Voice. If you enter checkmarks to the checkboxes of your most-used or favorite Voice, you can call up a list of these Voices on the VOICE LIBRARY by setting the [Favorites] checkbox to on. n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as normal on your computer OS. n By right-clicking on Windows / <control> key + clicking on Macintosh this section and selecting a menu, you can use the following functions. • Opening/closing all the folders • Determining whether the Voices listed here are divided into Category folders or Bank folders. • Copying/pasting • Changing the Voice name • Deleting all the checkmarks of the Favorites checkboxes at left of the Voices • Saving the VST presets n There are two ways to save a VST preset. • Right-click (Windows) / <control> key + click (Macintosh) on the Voice Library > Save VST presets • Click the “Save a VST preset” button on the DAW application “Save VST presets” on the right click menu allows you to save a voice of the User Bank separately. You need to save the voice of the Preset Bank to the User Bank when you want to save the Voice of the Preset Bank as a VST preset. The “Save a VST preset” button on the DAW application will save all settings (e.g. Editor Setup, VSTi Setup) of the S90 XS/S70 XS Editor VST as a VST preset. 6 Search Box You can search for your desired Voice by inputting a keyword here. 7 [Favorites] checkbox By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the appropriate checkboxes at the left of each Voice. 8 [OK]/[Cancel] buttons Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit without applying the Voice selection. 9 [Refresh] button When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the S90 XS/S70 XS itself, the name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the S90 XS/S70 XS. If this happens, click this button to update the Voice names of the VOICE LIBRARY. S90 XS/S70 XS Editor VST Owner’s Manual 16 S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Voice”) EQ Lo, Mi, Hi (Part EQ) Adjusts the equalizer settings for the current Voice. Cho, Rev, Pan (Chorus, Reverb, Pan) Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using the graphic knobs. Volume Adjusts the volume of the current Voice. ARP (Arpeggio) Turns Arpeggio playback on or off for the current Voice. When the [AD Part] is selected: This section lets you edit parameters for the A/D Part in the Voice mode. Clicking “AD” row turns this section on as illustrated below. Cho, Rev, Pan (Chorus, Reverb, Pan) Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the A/D Part in the Voice mode by using the graphic knobs. Volume Adjusts the Volume for the A/D Part. Output Select Determines the specific output(s) for the A/D Part. LCD Output jacks Stereo/Mono L&R OUTPUT L and R Stereo asL&R ASSIGNABLE OUTPUT L and R Stereo asL ASSIGNABLE OUTPUT L Mono asR ASSIGNABLE OUTPUT R Mono vocoder Insertion Effect for Part 1 - S90 XS/S70 XS Editor VST Owner’s Manual 17 S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Multi”) Mixer section (when the Voice/Multi is set to “Multi”) 1 3 2 1 Global This strip lets you edit the main parameters in the Multi mode, such as effect-related ones. Clicking “G” turns this section on as illustrated below. n When editing any of the Global parameters described below, a small square appears at the top right of the “G” box until you save the edited data as a file. This indication is the same as the green [F] indicator (page 30). Before editing After editing S90 XS/S70 XS Editor VST Owner’s Manual 18 S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Multi”) Multi program At the right of the “G” indication, the name of the Multi program which includes the parameter settings for all the Parts 1 – 16 is shown when the [Part 1-16] tab (page 20) is selected. Clicking the Multi program name will call up the MULTI LIBRARY which lets you select the desired Multi program. MULTI LIBRARY 6 1 2 3 4 5 1 Close button Click this to close this window without applying the changes to the S90 XS/S70 XS Editor VST. 2 [+]/[–] buttons Click the [+] button to open all the folders so that all Multi programs appear in all folders. Click the [–] button to close all folders. 3 Multi programs Indicates the Multi programs included in the folder. When pressing the [OK] button after clicking or double-clicking on a Multi, the Multi is actually selected and this window closes. n By right-clicking on Windows / <control> key + clicking on Macintosh this section and selecting a menu, you can use the following function. • Opening/closing all the folders 4 Search Box You can search for your desired Multi by inputting a keyword here. 5 [OK]/[Cancel] buttons Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit without applying the settings. 6 [Refresh] button When the MULTI LIBRARY is shown in the Editor and you store the Multi(s) on the S90 XS/S70 XS itself, the name(s) of the Multi(s) in the MULTI LIBRARY may be different from the Multi name(s) on the S90 XS/S70 XS. If this happens, click this button to update the Multi names of the MULTI LIBRARY. Ins.FX (Insertion Effect) Switches the Insertion Effect on or off. Chorus Turns the Chorus on or off and selects the Chorus type. Reverb Turns the Chorus on or off and selects the Reverb type. MFX (Master Effect) Turns the Master Effect on or off and selects the Master Effect type. MEQ Lo, Lo-M, Mid, Hi-M, Hi (Master EQ) Turns the Master EQ on or off and edits the parameters. Volume Adjusts the entire volume. S90 XS/S70 XS Editor VST Owner’s Manual 19 S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Multi”) 2 [Part 1-16]/[AD Part] tab Selects the Parts to be edited from [Part 1-16] and [AD Part]. The illustration below indicates that the [Part 1-16] tab is selected. 3 Part When [Part 1-16] is selected: This section lets you edit parameters for each Part. Clicking any of 1 – 16 turns the corresponding Part on. In the example illustration below, Part 1 is active. n When editing any of the Voice parameters such as Element parameters for each Part, a small square appears at the top right of the “1” – “16” box until you store the edited Voice as a User Voice or Mixing Voice or you save the edited data as a file. This indication is the same as the blue [V] indicator (page 30). Part (Part number) Indicates the Part number. Clicking here turns the corresponding Part on. n In some situations, selecting a Part number on the Editor may not change a Part number on the S90 XS/S70 XS and vice versa, even if the Editor is in the ONLINE status. If you come across such a situation and you want to match the Part number of the S90 XS/S70 XS with the one in the Editor, change the Part number via the panel controls of the S90 XS/S70 XS. Mute/Solo 1 2 1 Mute Sets the Mute status for each Part. Clicking “M” here changes the Mute status for all Parts simultaneously. 2 Solo Selects the Solo Part. Only one Part can be soloed at a time. Category, Bank, No. and Voice Name Indicates the Category Bank and name of the Voice assigned to each Part. When clicking here, the VOICE LIBRARY window appears at the right half section, letting you select a different Voice for the current Part. Using the VOICE LIBRARY is the same here as in the Voice mode; for details, refer to page 15. EQ Lo, Mi, Hi (Part EQ) Adjusts the equalizer settings for each Part. Ins.FX (Insertion Effect Switch) Switches the Insertion Effect on or off. n Insertion Effects can be applied up to eight Parts. Cho, Rev, Pan (Chorus, Reverb, Pan) Adjusts the Chorus Send level, Reverb Send level, and stereo Pan position for each Part by using the graphic knobs. Volume Adjusts the Volume for each Part. S90 XS/S70 XS Editor VST Owner’s Manual 20 S90 XS/S70 XS Editor VST Window: Mixer section (when the Voice/Multi is set to “Multi”) Rcv Channel (Receive Channel) Determines the MIDI Receive Channel for each Part. Output Select Determines the specific output(s) for the individual Part. The following settings are available. LCD Output jacks Stereo/Mono L&R OUTPUT L and R Stereo asL&R ASSIGNABLE OUTPUT L and R Stereo asL ASSIGNABLE OUTPUT L Mono asR ASSIGNABLE OUTPUT R Mono drum See below* See below* * When a Normal Voice is assigned to the edited Part, this value is indicated as “L&R (dr)” and the sound will be output via the OUTPUT L and R jacks in stereo. When a Drum Voice is assigned to the edited Part, this value is indicated as “drum” and the sound will be output via the jacks set in the Drum Key Edit as the Output Select parameter on the S90 XS/S70 XS Editor VST. ARP (Arpeggio) Turns Arpeggio playback on or off for each Part. n Up to four Parts can play back the Arpeggio simultaneously. When [AD Part] is selected: This section lets you edit parameters for the A/D Part in the Multi mode. Clicking “AD” row turns this section on as illustrated below. Ins.FX (Insertion Effect Switch) Switches the Insertion Effect on or off. n Insertion Effects can be applied up to eight Parts. Cho, Rev, Pan (Chorus, Reverb, Pan) Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the A/D Part by using the knob icons. Volume Adjusts the Volume for the A/D Part. Output Select Determines the specific output(s) for the A/D Part. The available settings are the same as those of the A/D Part in the Voice mode. Refer to page 17. S90 XS/S70 XS Editor VST Owner’s Manual 21 S90 XS/S70 XS Editor VST Window: Parameter Category section (when the Voice/Multi is set to “Voice”) Parameter Category section (when the Voice/Multi is set to “Voice”) You can edit detailed parameters for the current Part by clicking the button (located near the top right of the window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed Parameter section moves the Parameter Category Section rightward as shown below. Parameter Category section Parameter Category section S90 XS/S70 XS Editor VST Owner’s Manual Detailed Parameter section 22 S90 XS/S70 XS Editor VST Window: Parameter Category section (when the Voice/Multi is set to “Voice”) The indicated categories in the Parameter Category section differ depending on the selected row: G, V, or AD Part, as illustrated below. Clicking each of Categories calls up the corresponding parameters in the Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “V” indication shown below appears by clicking the “V” row appearing only when the [Voice] tab is selected at the bottom of the Mixer section. The “AD” indication shown below appears by clicking the “AD” row appearing only when the [AD Part] tab is selected at the bottom of the Mixer section. “G” “V” 1 1 2 3 “AD” 1 5 4 6 1 Open/Close button This button opens/closes the Detailed Parameter section. When only the left arrow is indicated in white, the Detailed Parameter section is hidden and you can call it up by clicking here. When only the right arrow is indicated in white, the Detailed Parameter section is shown on the display, allowing you to edit the displayed parameters. The Detailed Parameter section can be closed by clicking this button. You can also conveniently open and close the Detailed Parameter window from your computer keyboard. Hold down the <Ctrl> key (Command key for Mac) and simultaneously press the left arrow (←) key to open the window, or hold <Ctrl> key (Command key for Mac) and press the right arrow (→) key to close it. 2 Global Settings This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter categories calls up the corresponding Global parameters in the Detailed Parameter section. 3 Voice Common This is shown when the “V” row is selected in the Mixer section. Clicking each of the parameter categories calls up the corresponding Voice Common parameters in the Detailed Parameter section. S90 XS/S70 XS Editor VST Owner’s Manual 23 S90 XS/S70 XS Editor VST Window: Parameter Category section (when the Voice/Multi is set to “Voice”) 4 Element or Drum Key This is shown when the “V” row is selected in the Mixer section. When a Normal Voice is selected (“Element” is shown in the Parameter Category section) and you select an Element number (from 1 – 16), then clicking each of the parameter categories calls up the corresponding Element parameters in the Detailed Parameter section. When a Drum Voice is selected (“Drum Key” is shown in the Parameter Category section) and you select a key number (from C0 – C6), then clicking each of the parameter categories calls up the corresponding Drum Key parameters in the Detailed Parameter section. When the Drum Voice is selected: When the Normal Voice is selected: 2 3 5 6 4 1 1 Checkboxes for Elements (available when the Normal Voice is selected) Turns each Element on or off. 2 [1] – [8], [All] buttons (available when the Normal Voice is selected) Selects the Element to be edited. When [All] is selected, the Element Quick Setting window appears in the Detailed Parameter section. This window conveniently lets you edit frequently-used Element parameters of all Elements in a single window. 3 Element Parameter categories (available when the Normal Voice is selected) Indicates the categories of Element parameters. Clicking each of the categories calls up the corresponding Element parameters in the Detailed Parameter section. 4 Checkbox for the Drum Key (available when the Drum Voice is selected) Turns the current Drum Key on or off. 5 Drum Key (available when the Drum Voice is selected) Indicates the current Drum Key to be edited. You can select the Drum Key to be edited by clicking either of the triangular buttons below the key indication. 6 Drum Key Parameter categories (available when the Drum Voice is selected) Indicates the categories of Drum Key parameters. Clicking each of categories calls up the corresponding Drum Key parameters in the Detailed Parameter section. 5 AD This is shown when the AD Part is selected in the Mixer section. The Detailed Parameter section shows the Effect-related parameters. 6 i (Information) Indicates information about the parameter at the cursor arrow position. To view the information for a desired parameter, mouse-over the knob, slider or setting for that parameter. You can switch this Information feature on or off by clicking the “i” box. S90 XS/S70 XS Editor VST Owner’s Manual 24 S90 XS/S70 XS Editor VST Window: Parameter Category section (when the Voice/Multi is set to “Multi”) Parameter Category section (when the Voice/Multi is set to “Multi”) You can edit detailed parameters for the current Part by clicking the button (located near the top right of the window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed Parameter section moves the Parameter Category Section rightward as shown below. Parameter Category section Parameter Category section S90 XS/S70 XS Editor VST Owner’s Manual Detailed Parameter section 25 S90 XS/S70 XS Editor VST Window: Parameter Category section (when the Voice/Multi is set to “Multi”) The indicated categories in the Parameter Category section differ depending on the selected Part type: G, Part 1 – 16, or AD Part. Clicking each of the Categories calls up the corresponding parameters in the Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “Part 1 – 16” indication shown below appears by clicking any place on the Part row appearing only when the [Part 116] tab is selected at the bottom of the Mixer section. The “AD” indication shown below appears by clicking the “AD” row appearing only when the [AD Part] tab is selected at the bottom of the Mixer section. “G” Part 1 – 16 1 1 2 3 “AD” 1 5 4 6 1 Open/Close button Same as in the Voice mode (page 23). 2 Global Settings This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter categories calls up the corresponding Global parameters in the Detailed Parameter section. 3 Part Common This is shown when one of Parts 1 – 16 is selected in the Mixer section. Clicking each of the parameter categories calls up the corresponding Common parameters of the Voice/Part in the Detailed Parameter section. 4 Element or Drum Key This is shown when one of Parts 1 – 16 is selected in the Mixer section. When a Normal Voice is assigned to the current Part (“Element” is shown in the Parameter Category section) and you select an Element number (from 1 – 16), then clicking each of the parameter categories calls up the corresponding Element parameters in the Detailed Parameter section. When a Drum Voice is assigned to the current Part (“Drum Key” is shown in the Parameter Category section) and you select a key number (from C0 – C6), then clicking each of the parameter categories calls up the corresponding Drum Key parameters in the Detailed Parameter section. For details, see the Voice mode (page 24). 5 AD Same as in the Voice mode (page 24). 6 i (Information) Same as in the Voice mode (page 24). S90 XS/S70 XS Editor VST Owner’s Manual 26 S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Voice”) Detailed Parameter section (when the Voice/Multi is set to “Voice”) This section indicates the detailed parameters of the selected category for the current Voice or Global settings. This section introduces what parameters belong to each of the Parameter Categories. For details about each parameter, refer to the Owner’s Manual of the S90 XS/S70 XS. V, G, F indicators Three Indicators showing the Editing Status One or more of the following three indicators are shown at the right top of the window when you edit a parameter. Indicates that the Voice edits are not stored yet as a User Voice. This indicator disappears when you execute Voice Store (page 50). Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global Store (page 50). Indicates that the parameter edits are not saved yet as a file. n These indicators, “V,” “G” and “F” are linked with the small squares at the top right of "V" box and “G” box in the Mixer section. The “V” and “G” indicators disappear if you execute the Voice Store, Mixing Store and Global Store operation, respectively. The “F” indicator and the small squares at the top right of the “G” box in the Mixer section disappear only if you execute the File Save operation. All the indicators and the small squares disappear if you execute the File Save operation. S90 XS/S70 XS Editor VST Owner’s Manual 27 S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Voice”) Global Settings This Parameter category which is called up by selecting the “G” row in the Mixer section consists of the following sub categories. Master FX/EQ (Master Effect/EQ) Clicking this in the Parameter Category section calls up the Master Effect/EQ parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Master FX” or “Master EQ” on the Utility Voice Select display. Controller Assign Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Controller” on the Utility Select display. Micro Tuning Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Micro Tune” on the Utility Select display. Voice Common This Parameter Category is called up by selecting the “V” row in the Mixer section. The parameters belonging to this category lets you make the settings applied to all the Elements or Drum Keys commonly. The following sub categories are included. General Clicking this in the Parameter Category section calls up the parameters such as Voice name and pitchrelated parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Name,” “Play Mode,” “Filter/EG” and “3 Band EQ” on the Voice Edit Select display. ARP (Arpeggio) Clicking this in the Parameter Category section calls up the Arpeggio-related parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Arpeggio” on the Voice Edit Select display. Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which lets you use the search function for the selecting Arpeggio Types, as with the VOICE LIBRARY window (page 15). Control Set Clicking this in the Parameter Category section calls up the Controller Set parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Controller” on the Voice Edit Select display. LFO (Low Frequency Oscillator) Clicking this in the Parameter Category section calls up the LFO-related parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “LFO” on the Voice Edit Select display. This Parameter Category is not available for Drum Voices. Effect Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Effect” on the Voice Edit Select display. S90 XS/S70 XS Editor VST Owner’s Manual 28 S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Voice”) Element or Drum Key This Parameter Category is called up by selecting the “V” row in the Mixer section. The “Element” is shown when the Normal Voice is selected while the “Drum Key” is shown when the Drum Voice is selected. The parameters belonging to this category lets you make the settings applied to each of the Elements or Drum Keys individually. The following sub categories are included. n For information about the checkboxes at left of each Element number 1 – 8 and “All,” refer to page 24. For information about the Drum Key (note name) and checkbox, refer to page 24. n The Element parameters of the Normal Voice and Drum Key parameters of the Drum Voice can be edited only on the Editor. Note that these cannot be edited on the S90 XS/S70 XS instrument. Oscillator/Pitch Clicking this in the Parameter Category section calls up the parameters related to the Oscillator and Pitch in the Detailed Parameter section. Filter Clicking this in the Parameter Category section calls up the Filter-related parameters in the Detailed Parameter section. Amplitude Clicking this in the Parameter Category section calls up the Amplitude-related parameters in the Detailed Parameter section. LFO/EQ (Low Frequency Oscillator/Equalizer) Clicking this in the Parameter Category section calls up the parameters related to the LFO and EQ in the Detailed Parameter section. AD This Parameter Category is called up by selecting the “AD” row in the Mixer section. The parameters belonging to this category lets you make the settings applied to the A/D Part in the Voice mode. The following sub category is included. Effect Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to the A/D Part of the Voice mode in the Detailed Parameter section. S90 XS/S70 XS Editor VST Owner’s Manual 29 S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”) Detailed Parameter section (when the Voice/Multi is set to “Multi”) This section indicates the detailed parameters of the selected category for the current Part and the Voice assigned to the current Part, or the Global settings. This section introduces what parameters belong to each of the Parameter Categories. For details about each parameter, refer to the Owner’s Manual of the S90 XS/ S70 XS. V, M, G, F indicators Four Indicators showing the Editing Status One or more of the following four indicators are shown at the right top of the window when you edit a parameter. Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator disappears when you execute Voice Store (page 50). Indicates that the Multi edits are not stored yet. This indicator disappears when you execute Mixing Store (page 51). Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global Store (page 50). Indicates that the parameter edits are not saved yet as a file. n These indicators, “V,” “M,” “G” and “F” are linked with the small squares at the top right of the “1” – “16” boxes and “G” box in the Mixer section. The “V,” “M” and “G” indicators disappear if you execute the Voice Store, Mixing Store and Global Store operations, respectively. The “F” indicator and the small squares at the top right of the “G” box in the Mixer section disappear only if you execute the File Save operation. All the indicators and the small squares disappear if you execute the File Save operation. Global Settings This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following sub categories. Controller Assign Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Controller” on the Utility Select display. S90 XS/S70 XS Editor VST Owner’s Manual 30 S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”) Micro Tuning Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Micro Tune” on the Utility Select display. Multi Common This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following sub categories. Effect Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Effect” on the Multi Common Edit Select display then selecting “Reverb” and “Chorus.” Master FX/EQ (Master Effect/EQ) Clicking this in the Parameter Category section calls up the parameters related to the Master Effect and EQ in the Detailed Parameter section. On the S90 XS/S70 XS instrument, the Master Effect parameters are the same as those called up by selecting “Effect” on the Multi Common Edit Select display then selecting “Master,” while the Master EQ parameters are the same as those called up by selecting “Master EQ” on the Multi Common Edit Select display. Multi Name Clicking this in the Parameter Category section calls up the box which lets you edit the Multi name in the Detailed Parameter section. On the S90 XS/S70 XS instrument, this is the same as the display called up by selecting “Name” on the Multi Common Edit Select display. Part Common This Parameter category which is called up by selecting any of the “1” – “16” rows in the Mixer section consists of the following sub categories. General Clicking this calls up the GENERAL window in the Parameter Category section. This window lets you edit the Voice Common parameters such as naming and the Mixing Part parameters such as Pitch, Portamento, Note/Velocity Limit and Part EQ. In the Part Common General section, both the Mixing Part parameters (the “M” indicator appears at the top right during editing) and Voice Common parameters (the “V” indicator appears at the top right during editing) can be edited. To distinguish between them, a small dot is shown at the immediate left of the parameters. ARP (Arpeggio) Clicking this in the Parameter Category section calls up the parameters related to the Arpeggio assigned to the current Part in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “Arpeggio” on the Multi Common Edit Select display or Multi Edit Select display. Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which lets you use the search function for the selecting Types, as with the VOICE LIBRARY window (page 15). RCV/Control Set (Receive/Control Set) Clicking this calls up the RCV/Control Set window in the Parameter Category section. This window lets you edit the Receive Switch parameters for the current Part and the Controller Set Assign parameters for the current Part and the Voice. On the S90 XS/S70 XS instrument, these parameters are the same as those called up by selecting “RcvSw” on the Multi Edit Select display. LFO (Low Frequency Oscillator) Clicking this in the Parameter Category section calls up the LFO-related parameters of the Voice assigned to the current Part in the Detailed Parameter section. This Parameter Category is not available if the Drum Voice is assigned to the current Part. S90 XS/S70 XS Editor VST Owner’s Manual 31 S90 XS/S70 XS Editor VST Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”) Effect Clicking this in the Parameter Category section calls up the parameters related to the Insertion Effect for the current Part and System Effect applied to all the Parts in the Detailed Parameter section. Element or Drum Key This Parameter Category is called up by selecting any of the “1” – “16” rows in the Mixer section. The “Element” indication appears when the Normal Voice is assigned to the current Part while the “Drum Key” is shown when the Drum Voice is assigned. The parameters belonging to this category lets you make the settings applied to each of the Elements or Drum Keys individually. For details, see the Voice mode section. AD This Parameter Category is called up by selecting the “AD” row in the Mixer section. The parameters belonging to this category lets you make the settings applied to the A/D Part in the Multi mode. The following sub category is included. Effect Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to the A/D Part of the Multi mode in the Detailed Parameter section. S90 XS/S70 XS Editor VST Owner’s Manual 32 S90 XS/S70 XS Editor VST Window: Bottom section Bottom section 3 1 4 5 6 2 7 1 Controller Set status This section indicates which controller of the S90 XS/S70 XS (either built-in or connected) is used as the Control Source of the Controller Set edited in the RCV/Control Set window. 2 1 3 1 Part Indicates the current Part. When [Voice]/[Multi] is set to “Voice” (Voice mode is enabled), in the Voice mode, this indication is fixed to “1.” When the [Voice]/[Multi] is set to “Multi” (Multi mode is enabled), in the Multi mode, this indication is determined by selecting the Part in the Mixer section. 2 Control Source (Controller) Indicates the six controllers as source of the Controller Set. The abbreviations for the Controllers are as follows: Indication Control Source Indication Control Source PB Pitch Bend Wheel BC Breath Controller MW Modulation Wheel AS1 ASSIGN 1 knob AT After Touch (keyboard) AS2 ASSIGN 2 knob FC Foot Controller FC2 Foot Controller 2 FS Foot Switch AF1 ASSIGNABLE FUNCTION 1 button RB Ribbon Controller AF2 ASSIGNABLE FUNCTION 2 button 3 On/Off status When a lamp is turned on, a certain function (Destination) is assigned to the corresponding Source (controller). When a lamp is turned off, no function (Destination) is assigned to the corresponding Source (controller). S90 XS/S70 XS Editor VST Owner’s Manual 33 S90 XS/S70 XS Editor VST Window: Bottom section 2 Quick Setup From this section, you can instantly call up appropriate settings related to the MIDI parameters. n The settings of the S90 XS/S70 XS instrument made via the operation here cannot be saved as an Editor file. You can select a template from 1 – 3. On the S90 XS/S70 XS instrument, this section is the same as the Quick Setup parameter on the first page of the display called up by selecting "Quick Set" in the Utility Select display. n The parameters set via the Quick Setup can be edited on the Hardware Utility window (page 45). 3 Knobs This section lets you adjust various parameters assigned to the Knobs on the front panel of the S90 XS/ S70 XS instrument. 1 2 1 [TONE]/[EG]/[EQ]/[Effect]/[MIC] Same as the Knob Function buttons on the panel of the S90 XS/S70 XS. 2 Knobs 1 – 4 Same as the four knobs on the panel of the S90 XS/S70 XS. 4 ARP (Arpeggio) Allows you to change the Arpeggio related setup (on/off status and selecting 1 – 5). 5 MIDI monitor Turns the MIDI monitor function on or off. By turning this MIDI jack icon on, the note on/off messages transmitted to the S90 XS/S70 XS will be shown on the virtual keyboard at the bottom of the Editor window. n When using the MIDI monitor function, make sure to set the audio ports of the audio interface connected to the S90 XS/S70 XS instrument on the VSTi Setup window (page 46). The VSTi Setup is not determined, or no audio device is installed, the MIDI monitor function is limited when no audio port is selected. 6 [A.Func] (Assignable Function) button This button is related to “all AF off,” “AF1 on” and “AF2 on” selected as a value of the XA Control parameter on the Oscillator/Pitch window of the Normal Voice Element Edit. For details, refer to the Owner’s Manual of the S90 XS/S70 XS. S90 XS/S70 XS Editor VST Owner’s Manual 34 S90 XS/S70 XS Editor VST Window: Bottom section 7 Keyboard Allows you to audition the edited sound. Note on/off messages corresponding to the keys you click or drag will be transmitted to the external device via the MIDI port specified in the Editor Setup window (page 41) as the MIDI OUT parameter. n The velocity when clicking a key is determined by the setting of the Keyboard Velocity parameter (page 43) in the Setup window. n When a Drum Voice is edited, you can initialize the parameter settings of each key by right-clicking (Windows) / <control> key + clicking (Macintosh) on the virtual keyboard. From the menu called up by rightclicking (Windows) / <control> key + clicking (Macintosh), selecting “Initialize key” will initialize all the parameter settings except for the waveform assignment of the currently selected drum key, while selecting “Initialize key (with Wave)” will initialize the all the parameter settings including the waveform assignment. S90 XS/S70 XS Editor VST Owner’s Manual 35 Basic Operations Basic Operations This section covers basic operations of the S90 XS/S70 XS Editor VST. Naming a Voice You can assign an original name of your choice to the edited Voice on the VOICE LIBRARY window, GENERAL window in the Part Common General, and the Store window. From the VOICE LIBRARY window (page 15), select a User Voice or Mixing Voice then click the selected Voice so that you can edit the name. After editing the Voice name, pressing the <Enter> key or locating the cursor to another parameter finalizes the edited name while pressing the <Esc> key aborts it. From the GENERAL window (below) and Store window (page 50), locate the cursor in the text box of “Voice Name” at the top of this window, then edit the name in the text box as desired. After editing, pressing the <Enter> key or locating the cursor to another parameter finalizes the edited name. Searching for a Voice/Arpeggio Type You can search for the desired Voice, Multi and Arpeggio type on the VOICE LIBRARY window (page 15), MULTI LIBRARY window (page 19) and ARP LIBRARY window just by inputting a keyword in the text box at the bottom of these windows respectively. Likewise, the Search function is available on the Import window (page 39). Inputting a numerical value When double clicking a value box such as that shown above, the value box can be edited and you can input a numerical value directly by using numeric keys. After editing, pressing the <Enter> key or locating the cursor to another parameter finalizes the value while pressing the <Esc> key aborts it. You can edit the value also by using the Cursor key or <Page Up>/<Page Down> key after clicking this box. In Windows, to reset the value to its default, simultaneously hold down the <Ctrl> key and click on the value box. On the Macintosh, to reset the value to its default, simultaneously hold down the Command key and click on the value box. n For certain parameters, the value can be edited only by using the mouse and cannot be input directly by using the numeric keys. S90 XS/S70 XS Editor VST Owner’s Manual 36 Basic Operations Selecting a value Clicking inside the value box like such as that shown above calls up the list box, from which you can select the desired value. You can also select the value also by clicking the arrow at right end of this box. Using a knob Dragging or clicking the knob such as that shown above changes the value of the corresponding parameter. After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you want to make fine adjustments to the value, drag the mouse while holding the <Shift> key. The specific operation of the knob is determined by the settings of the Knob Guide parameter and Knob Mouse Control parameter in the Setup window (page 41). In Windows, to reset the value to its default, simultaneously hold down the <Ctrl> key and click on the knob. On the Macintosh, to reset the value to its default, simultaneously hold down the Command key and click on the knob. Using a slider Dragging or clicking the slider such as that shown above changes the value of the corresponding parameter. After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you want to make fine adjustments to the value, drag the mouse while holding the <Shift> key. The specific operation of the slider is determined by the setting of the Slider Mouse Control parameter in the Setup window (page 41). In Windows, to reset the value to its default, simultaneously hold down the <Ctrl> key and click on the slider. On the Macintosh, to reset the value to its default, simultaneously hold down the Command key and click on the slider. Using a graph Dragging one of the boxes in the graph (as shown above) changes the value of the corresponding parameter. In Windows, simultaneously hold down the <Ctrl> key and click on the box to reset the corresponding value to the default setting. To reset the entire graph and its values to the default setting, simultaneously hold down the <Ctrl> key and click on any section in the graph (other than one of the boxes) to reset the entire graph and its values to the default setting. On the Macintosh, simultaneously hold down the Command key and click on the box to reset the corresponding value to the default setting. To reset the entire graph and its values to the default setting, simultaneously hold down the Command key and click on any section in the graph (other than one of the boxes) to reset the entire graph and its values to the default setting. S90 XS/S70 XS Editor VST Owner’s Manual 37 Menu: [File] menu Menu [File] menu New Creates and opens a new file containing the default Mixing setup and Voice data. Open... Opens an already saved file of the S90 XS/S70 XS Editor VST. The following file types can be selected and opened. • S90 XS/S70 XS Editor (.X2E) • S90 ES Multi Part Editor (.M6E) • S90 XS/S70 XS All Files (.X2A) CAUTION Unlike files of other applications such as word processors, only a single file can be opened and edited on the S90 XS/S70 XS Editor VST. Before opening a new file, make sure to save the edited settings as a file to avoid losing data. Save Saves the current settings by overwriting the current file. Save As... Saves the current settings as a S90 XS/S70 XS Editor file (.X2E) under a new or different name. S90 XS/S70 XS Editor VST Owner’s Manual 38 Menu: [File] menu Import Imports the Voice data (a specific Voice in a specific folder or all Voices in a specific folder) from a different file to the current file. Click the File Select button (3), select a file including your desired Voice(s) so that the folders in the selected file are listed as the Source Voice list (8), select a Voice or Voices or a folder or folders in the list (8), select a destination location in the Destination Voice list (9) of the current file, then click [Import] (5) to execute the Import operation. The following file types can be selected. • S90 XS/S70 XS Editor (.X2E) • MOTIF XS Editor (.X0E) • MOTIF-RACK XS Editor (.X1E) • S90 ES Voice Editor (.S7E) • S90 ES Multi Part Editor (.M6E) • S90 XS/S70 XS All (.X2A) • S90 XS/S70 XS All Voice (.X2V) • MOTIF XS All (.X0A) • MOTIF XS All Voice (.X0V) 2 3 4 5 6 1 6 7 ) 8 7 9 1 [X] (Close) button Click this to close this window without importing. 2 File name (Indication only) Indicates the currently selected file. 3 File selection button Click this to open the dialog for file selection. 4 [Category]/[Bank] checkboxes Click either of these boxes to determine whether the Voices in the Source Voice list (8) are divided into Categories or Banks. S90 XS/S70 XS Editor VST Owner’s Manual 39 Menu: [File] menu 5 [Import] button Click this to actually import the Voice(s) selected in the Source Voice list (8) to the specified location in the Destination Voice list (9). n You can also import Voice data without the use of this button by dragging the desired Voice or folder from the Source Voice list then dropping it to the Destination Voice list. n A Normal Voice cannot be imported to the User Drum Voice Bank. Likewise, a Drum Voice cannot be imported to the User Normal Voice Bank. No Voices can be imported to the Preset Voice Bank. 6 [+]/[–] buttons Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to close all folders. 7 Folder button (Bank or Category) Double click here to open or close the folder. 8 Source Voice list Indicates the Voices or folders of the selected file to be imported. By right-clicking (Windows) / <control> key + clicking (Macintosh) this section and selecting a menu, you can perform the following functions. • Opening/Closing all the folders • Determining whether the Voices listed here are divided into Category folders or Bank folders 9 Destination Voice list Indicates the Voices or folders currently edited on the S90 XS/S70 XS Editor VST. n By right-clicking (Windows) / <control> key + clicking (Macintosh) this section and selecting a menu, you can open or close all the folders. ) Search box You can search for your desired Voice from the Source Voice list (8) by inputting a keyword here. S90 XS/S70 XS Editor VST Owner’s Manual 40 Menu: [File] menu Setup Determines the basic setup of the S90 XS/S70 XS Editor VST. After setting necessary parameters, click [OK] to actually apply the settings to the S90 XS/S70 XS Editor VST. 1 3 4 2 5 6 7 8 9 ) ! @ # 1 [X] (Close) button Click this to close this window without applying the settings. This button is the same as the [Cancel] button (#). 2 [Detail] button You can make detailed settings for the Input Port and Output Port by setting this button to “On.” This setting is necessary if the Port name is changed on a computer. 3 MIDI Set the MIDI Port for communication between the S90 XS/S70 XS Editor VST and the S90 XS/S70 XS instrument. When the [Detail] button (2) is set to “Off,” select a value such as “S90 XS” or “S70 XS” at the “USB Device” column. When the [Detail] button (2) is set to “On,” select Port 4 for the S90 XS/S70 XS in the MIDI In setting, then select Port 1 and Port 4 for the S90 XS/S70 XS in the MIDI Out settings. n When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the previously used Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the DAW application. n Keep in mind that setup on the DAW application is necessary before making settings here. n Make sure to set the MIDI IN/OUT parameter to “USB” in the MIDI display of the Utility mode on the S90 XS/ S70 XS instrument. 4 Device No. Set the Device number to the same as the value specified in the MIDI display of the Utility mode on the S90 XS/S70 XS itself. When the Device number on the S90 XS/S70 XS is set to “All,” set the Device No. here to “1.” S90 XS/S70 XS Editor VST Owner’s Manual 41 Menu: [File] menu 5 Auto Sync Setting This section lets you set how the data synchronization between the S90 XS/S70 XS Editor VST and the S90 XS/S70 XS instrument is executed when “OFFLINE” is changed to “ONLINE.” Actual data synchronization is executed from the Auto Sync window (page 54) called up automatically under certain circumstances such as clicking the [OFFLINE] button, starting the S90 XS/S70 XS Editor VST and opening a new file on the Editor. Global Determines whether or not the Global data (see page 3) is synchronized and which data (S90 XS/S70 XS Editor VST or S90 XS/S70 XS itself) is synchronized with the other. Current Determines whether or not the Current data (see page 3) is synchronized and which data (S90 XS/S70 XS Editor VST or S90 XS/S70 XS itself) is synchronized with the other. Voice Determines whether or not the Voice data (see page 3) is synchronized and which data (S90 XS/S70 XS Editor VST or S90 XS/S70 XS itself) is synchronized with the other. Auto Start When this is set to “On” and one of the following operations is executed, data synchronization will be started automatically as soon as the Auto Sync window is opened. • When clicking “OFFLINE” after setting the MIDI IN/OUT parameter correctly in the Utility mode on the S90 XS/S70 XS, setting the MIDI Ports correctly on the computer, and making a proper connection. • When the connection between the S90 XS/S70 XS and a computer are corrected after appropriately correcting the setup of the S90 XS/S70 XS and the computer. • When the settings on the S90 XS/S70 XS instrument and the computer are corrected after appropriately reconnecting the devices. • When the settings on the S90 XS/S70 XS instrument and the computer are corrected after appropriately launching the S90 XS/S70 XS Editor VST. n The parameters set here apply also to the parameters having the same names in the Auto Sync window. CAUTION When the Auto Start parameter is set to “On,” data synchronization is started automatically under certain circumstances (page 54) such as clicking the [OFFLINE] button, starting the Editor and opening a new file on the Editor. Keep in mind that this will cause unexpected data loss on the S90 XS/S70 XS Editor VST or the S90 XS/S70 XS itself, since new data automatically overwrites old data upon data synchronization. Make sure to save your important data before using the S90 XS/S70 XS Editor VST. 6 Knob Guide Determines whether or not the Knob Guide (knob editing area) appears when adjusting a knob. Setting this to On conveniently enlarges the knob editing area (as shown), making it much easier to edit a knob’s parameter. Knob Guide: On S90 XS/S70 XS Editor VST Owner’s Manual Knob Guide: Off 42 Menu: [File] menu 7 Knob Mouse Control Determines how the knob illustrated at right responds to your mouse control. Circular When this is selected, you can jump to a specific value by clicking at a point within the Knob editing area. You can edit the value also by dragging the mouse in a circular direction—in much the same way as turning an actual knob. Relative Circular When this is selected, you can edit the value by dragging the mouse in a circular direction—in much the same way as turning an actual knob. Linear When this is selected, you can edit the value by dragging any point in the knob editing area (the mouse pointer disappears) and moving it vertically or horizontally—in much the same way as operating a slider. 8 Slider Mouse Control Determines how the Slider illustrated at right responds to your mouse control. Jump When this is selected, clicking any location in the slider jumps the slider pointer to that location. Touch When this is selected, you can edit the value by dragging and moving the slider pointer horizontally—in much the same way as operating an actual slider. Clicking at any location in the slider (other than the orange pointers) does not affect the slider. Ramp When this is selected, clicking at any location in the slider (other than the orange pointers) moves the nearest pointer to that location. Dragging any point in the slider moves the slider pointer accordingly. Relative When this is selected, you can edit the value by dragging any point (the mouse pointer disappears) and moving it horizontally. 9 Keyboard Velocity Determines the Velocity value generated when clicking any note on the virtual keyboard at the bottom of the Editor window. When “Fix” is turned on, clicking any key generates the same velocity value which can be specified in the box at right of “Fix.” When “Free” is turned on, the generated Velocity value differs depending on the click location. The lower on the key graphic you click, the higher the Velocity. S90 XS/S70 XS Editor VST Owner’s Manual 43 Menu: [File] menu ) Inc/Dec Action Determines how the triangular buttons ([▲]/[▼]/[L]/[M]) located at the parameter boxes as illustrated below work. Inc/Inc: When this is selected, clicking the [▲] button increases the value by 1 while clicking the [L] button moves the cursor downward by one item. Inc/Dec: When this is selected, clicking the [▲] button increases the value by 1 while clicking the [L] button moves the cursor upward by one item. Dec/Inc: When this is selected, clicking the [▲] button decreases the value by 1 while clicking the [L] button moves the cursor downward by one item. Dec/Dec: When this is selected, clicking the [▲] button decreases the value by 1 while clicking the [L] button moves the cursor upward by one item. ! Startup Mode This section lets you set the startup mode when launching the S90 XS/S70 XS Editor VST. Voice The editor will start in the Voice mode. Multi The editor will start in the Multi mode. n When using Cubase 5.0.1 or later, if the S90 XS/S70 XS Editor VST is opened from the Instrument Track or the Media Bay window, the editor will start in the Voice mode. @ [OK] button Click this to actually apply the settings to the S90 XS/S70 XS Editor VST and close the Setup window. # [Cancel] button Click this to close the Setup window without applying the settings to the S90 XS/S70 XS Editor VST. S90 XS/S70 XS Editor VST Owner’s Manual 44 Menu: [File] menu Hardware Utility From the Hardware Utility window called up by selecting this menu, you can make the settings related to the parameters in the Utility mode of the S90 XS/S70 XS. Editing the parameter on this window will affect the parameter having the same name of the S90 XS/S70 XS instrument. After making the settings, click [Store] at the bottom of this window to store the settings as Global data. 1 2 4 3 6 5 7 S90 XS/S70 XS Editor VST (parameters on the above window) 1 Tone S90 XS/S70 XS instrument Note Shift [UTILITY] → General → Note Shift Tune [UTILITY] → General → Tune 2 Auto Load Setup Power On Mode [UTILITY] → General → Power On Mode 3 MIDI Channel Basic Receive Ch [UTILITY] → MIDI → Basic Receive Ch Basic Transmit Ch [UTILITY] → MIDI → Keyboard Transmit Ch 4 MIDI Sync MIDI Sync [UTILITY] → MIDI → MIDI Sync Clock Out [UTILITY] → MIDI → Clock Out 5 MIDI Switch Bank Select [UTILITY] → MIDI → Bank Select Sw Program Change [UTILITY] → MIDI → Prg Change Sw Local Control [UTILITY] → MIDI → Local Control 6 MIDI Other Controller Reset [UTILITY] → MIDI → Controller Reset 7 Quick Setup 1, 2, 3 [UTILITY] → Quick Set → Quick Setup S90 XS/S70 XS Editor VST Owner’s Manual 45 Menu: [File] menu VSTi Setup This determines the setup of the audio routing from the S90 XS/S70 XS instrument to the DAW application via the VSTi Setup window in the menu of the S90 XS/S70 XS Editor VST. All connections of the audio ports will be cleared when clicking the [Clear] button. Select the audio ports of the audio interface to which the S90 XS/S70 XS instrument is connected. n When the VSTi Setup is not determined, or no audio device is installed, an error message appears on the S90 XS/S70 XS Editor VST. The follow functions are limited when no audio port is selected. • Automation • Keyboard (page 35) Make sure to set the audio ports of the audio interface connected to the S90 XS/S70 XS instrument on the VSTi Setup window. S90 XS/S70 XS Editor VST Owner’s Manual 46 Menu: [Edit] menu [Edit] menu Voice mode Multi mode Undo Cancels the changes you made in your most recent editing. [Undo] menu will be black and cannot be selected depending on the most recent edited parameter. Redo Redo is available only after using Undo, and lets you restore the changes you made before undoing them. Copy Copies the selected items such as characters of the Voice name in the text box, Voice(s) in the VOICE LIBRARY window and entire Part setup to the clipboard. Paste Pastes the Voice(s), entire Part setup, and characters from the clipboard to the specified location. Initialize Current Voice (in the Voice mode)/Initialize Current Part Voice (in the Multi mode) In the Voice mode, select [Initialize Current Voice] under [Edit] to call up the Initialize Current Voice window from which you can initialize the current Voice by clicking [Start]. In the Multi mode, select [Initialize Current Part Voice] under [Edit] to call up the Initialize Current Part Voice window from which you can initialize the Voice assigned to the current Part by clicking [Start]. When a Normal Voice is edited: 1 2 4 3 5 6 S90 XS/S70 XS Editor VST Owner’s Manual 47 Menu: [Edit] menu When a Drum Voice is edited: 1 2 4 3 5 6 1 [X] (Close) button Click this to close the window without executing Initialization. 2 [All]/[Clear] button Clicking [All] turns all the checkboxes in this window on while clicking [Clear] turns them off. 3 [Common] checkbox When this is turned on, clicking [Start] initializes the settings of all the Common parameters (Voice Common parameters when the Editor is set to the Voice mode or Part Common parameters when the Editor is set to the Multi mode). 4 with Wave Assignment When this is turned on, clicking [Start] initializes the Waveform assignment for all Elements of the current Voice. 5 Element [1] – [8] or Drum Key C0 – C6 checkboxes When a Normal Voice is edited, clicking [Start] initializes the settings of all parameters for the Elements which are turned on here. When a Drum Voice is edited, clicking [Start] initializes the settings of all parameters for the drum keys which are turned on here. 6 [Start] button After the setup is completed, click [Start] to initialize the parameter settings and close the window. S90 XS/S70 XS Editor VST Owner’s Manual 48 Menu: [Edit] menu Initialize Current Mixing (only in the Multi mode) Select this menu to call up the Initialize Current Mixing window, set the parameters as necessary, then click [Start] to initialize the Mixing data. 1 2 4 3 5 6 7 1 [X] (Close) button Click this to close the window without executing Initialization. 2 [All]/[Clear] button Clicking [All] turns all the check boxes in this window on while clicking [Clear] turns them off. 3 [Multi Common] checkbox When this is turned on, clicking [Start] initializes the settings of all the Multi Common parameters. 4 Initialize Template The following templates for initializing are available. Normal: When this is selected, clicking [Start] initializes the Editor Setup to the normal default settings. GM: When this is selected, clicking [Start] initializes the Editor Setup so that the S90 XS/S70 XS can be used as a GM tone generator. Contemporary R&B – TurkishPop: When one of these templates is selected, clicking [Start] initializes the Editor Setup so that the S90 XS/ S70 XS can be used as a tone generator which matches the name of the selected template. 5 Part [1] – [16] checkboxes Clicking [Start] initializes the settings of all parameters for the Parts which are turned on here. 6 [AD] checkbox When this is turned on, clicking [Start] initializes the settings of all parameters for the A/D Part. 7 [Start] button After setup is completed, click [Start] to initialize the Mixing setup and close the window. S90 XS/S70 XS Editor VST Owner’s Manual 49 Menu: [Edit] menu Store Global Simply selecting this menu will store the Global settings. The Global settings will be stored only to the internal memory of the S90 XS/S70 XS instrument. Store Voice From the window selected via this menu, you can store the edited Voice. The current Voice is stored in the Voice mode while the Voice assigned to the current Part is stored in the Multi mode. Select the desired Bank folder (5), select the number of the destination Voice (6), input the Voice name (2), then click the [Store] button to store the Voice as a User Voice or Mixing Voice (available only in the Multi mode). 2 3 1 4 5 6 1 [X] (Close) button Click this to close this window without executing the Store operation. 2 Voice Name Enter an original name for the Voice to be stored. 3 [Store] button Click this to store the edited Voice to the specified Bank and number. CAUTION Like other parameters, the Voice data is synchronized with the S90 XS/S70 XS instrument when ONLINE (page 13) is indicated. This means that clicking [Store] in this window stores the edited Voice to the corresponding Bank in the internal memory of the S90 XS/S70 XS instrument. Be careful not to overwrite any important data. 4 [+]/[–] buttons Pressing the [+] button opens all the Bank folders, while pressing the [–] button closes them. S90 XS/S70 XS Editor VST Owner’s Manual 50 Menu: [Edit] menu 5 Bank folder This section indicates the following Banks to which you can store the edited Voice. • Normal User 1 • Normal User 2 • Normal User 3 • Normal User 4 • Drum User • Mixing Clicking on each Bank folder opens it and all the Voices stored in the Bank appear as illustrated above (from the left illustration to the right one). When clicking the Bank folder again, it closes as illustrated above (from the right illustration to the left one). Note that the indicated Bank differs depending on the current mode and current Voice type. The Mixing Bank is shown only in the Multi mode. The Drum User Bank is shown only when the Drum Voice is selected (in the Voice mode) or the Drum Voice is assigned to the current Part (in the Multi mode). Likewise, the Normal User Bank is shown only when the Normal Voice is selected (in the Voice mode) or the Normal Voice is assigned to the current Part (in the Multi mode). 6 Voices The Voices in the selected Bank are listed. Before clicking the [Store] button, you need to select the number of the destination Voice here. Right-clicking (Windows) / <control> key + clicking (Macintosh) on this section calls up the menus “All Open” and “All Close,” letting you open or close all the Bank folders. Store Mixing (only in the Multi mode) This menu lets you store the Mixing settings in the Multi mode. Select the desired Multi number and enter the desired name, then click the [Store] button to store the Mixing settings to internal memory (overwritten to the currently selected Multi) of the S90 XS/S70 XS instrument. Voice Compare This menu lets you switch between the just-edited Voice and its original, unedited condition, allowing you to hear how your edits affect the sound. Select “Voice Compare” to enter the Voice Compare mode. In this mode, you can hear the sound of the original Voice and none of the parameters in the window can be edited. Select “Voice Compare” again to return to the original status. n The status of the S90 XS/S70 XS instrument is maintained even if you enable the Voice Compare mode on the S90 XS/ S70 XS Editor VST. Mixing Compare (only in the Multi mode) This menu lets you switch between the just-edited Mixing and its original, unedited condition, allowing you to hear how your edits affect the sound. Select “Mixing Compare” to enter the Mixing Compare mode. In this mode, you can hear the sound of the original Mixing setup and none of the parameters in the window can be edited. Select “Mixing Compare” again to return to the original status. n The status of the S90 XS/S70 XS instrument is maintained even if you enable the Mixing Compare mode on the S90 XS/ S70 XS Editor VST. S90 XS/S70 XS Editor VST Owner’s Manual 51 Menu: [Bulk] menu [Bulk] menu Data Sync Select this menu to call up the Data Sync window, set the parameters as necessary, then click [Start] to transmit the specified data from/to the S90 XS/S70 XS Editor VST to/from the S90 XS/S70 XS instrument. 1 3 2 4 5 6 1 [X] (Close) button Click this to close this window without executing Data Sync. 2 [Transmit]/[Receive] checkboxes Determines whether the S90 XS/S70 XS Editor VST transmits data to the S90 XS/S70 XS or receives data from the S90 XS/S70 XS. [Transmit] checkbox: When this is checked, clicking [Start] button transmits data from the Editor to the instrument. [Receive] checkbox: When this is checked, clicking [Start] button transmits data from the instrument to the Editor. 3 Data type to be transmitted/received Here, you can set which data type is to be transmitted or received. Clicking the [All] button turns all the data types on while clicking the [Clear] button turns all the data types off. Current Turn this on then click the [Start] button to transmit or receive the Current settings. Global Turn this on then click the [Start] button to transmit or receive the Global settings. Preset (Favorites) Turn this on then click the [Start] button to transmit or receive the Favorites-related settings of the Preset Voice(s). Normal User 1 – 4 Turn this on then click the [Start] button to transmit or receive the data of the Normal User Voice Bank 1, 2, 3, and 4 respectively. Drum User Turn this on then click the [Start] button to transmit or receive the data of the Drum User Voice Bank. S90 XS/S70 XS Editor VST Owner’s Manual 52 Menu: [Help] menu 4 Progress Bar Shows how much of the data has been transmitted. 5 [Start] button After setup is completed, click the [Start] button to actually execute data transmission. 6 [Stop] button This button is available only when data transmission is being executed and allows you to cancel the transmission. [Help] menu Manual Selecting this menu calls up this manual in PDF format. About Selecting this menu calls up information such as the version number of the S90 XS/S70 XS Editor VST. S90 XS/S70 XS Editor VST Owner’s Manual 53 Menu Auto Sync window This window is used for changing the status of the Editor from “OFFLINE” to “ONLINE.” While editing a parameter on the Editor affects the same parameter on the S90 XS/S70 XS instrument and vice versa in the Online status, you can disable the “mirroring” of parameter changes between the devices by switching to Offline status. The Auto Sync window can be called up by clicking “OFFLINE” on the Editor window when the Editor is in the Offline status. The Auto Sync window can also be called up automatically (without clicking “OFFLINE”) under the following circumstances: • When opening a file. • When creating a new file by selecting “New” under the File menu. • When changing the mode on the Editor in the Online status of the Editor. • When changing the mode on the S90 XS/S70 XS instrument in the Online status of the Editor. • When the connection between the S90 XS/S70 XS and a computer are corrected after appropriately correcting the setup of the S90 XS/S70 XS and the computer. • When the settings on the S90 XS/S70 XS instrument and the computer are corrected after appropriately reconnecting the devices. n If the Auto Start parameter is set to “On” in the Auto Sync window, data synchronization may be started automatically as soon as the Auto Sync window is opened in certain conditions. For details, see page 42. On the Auto Sync window, set the Data Port properly then click [Start] button to execute data synchronization. As soon as the data synchronization is completed, the Auto Sync window is closed then the OFFLINE indication changes to ONLINE automatically. 1 3 4 2 5 6 7 8 1 [X] (Close) button Click this to close this window without executing data synchronization. 2 [Detail] button 3 Port 4 Device No. 5 Auto Sync Setting These parameters are same as in the Setup window. See page 41. 6 Progress Bar 7 [Start] button 8 [Stop] button These parameters are same as in the Data Sync window. See page 53. S90 XS/S70 XS Editor VST Owner’s Manual 54 Troubleshooting Troubleshooting If you encounter problems such as no sound output or abnormal behavior, verify the connections before checking the following. Sound does not change when using the knobs or sliders. • Is “ONLINE” indicated on the Editor window? • Is the lamp at left of “ONLINE” indicator turned on? If it is turned off, the settings related to communication between the S90 XS/S70 XS and a computer may be wrong. Check the MIDI Port setting (page 41) on the S90 XS/S70 XS Editor VST, the MIDI IN/OUT parameter setting in the MIDI display of the Utility mode on the S90 XS/S70 XS instrument, or the cable connection between the S90 XS/S70 XS and the computer. • Check the MIDI Port setting and Device No. setting. (page 41) Bulk data is not transmitted/received successfully. • Check the same points as above such as “ONLINE” indication and MIDI Port settings. The appropriate Port is not shown in the Setup window. • The MIDI Port in the Setup window can be selected from the Ports specified in the DAW application. Check the MIDI Port settings in the DAW application. • When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the previously used Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the DAW application. “No Audio Port Connection” error message appears. • Set up the audio ports of your audio interface connected to the S90 XS/S70 XS in the VSTi Setup window (page 46). The sounds of the S90 XS/S70 XS do not come to the Audio Mixer in the DAW application. • Set up the audio ports of your audio interface connected to the S90 XS/S70 XS in the VSTi Setup window (page 46). The multi port audio from S90 XS/S70 XS does not come to the DAW application. • Refer to “Starting the S90 XS/S70 XS Editor VST” (page 4). U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation ©2009 Yamaha Corporation 905MW-A0 S90 XS/S70 XS Editor VST Owner’s Manual 55
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55

Yamaha S70XS de handleiding

Categorie
Audio-equalizers
Type
de handleiding
Deze handleiding is ook geschikt voor