Yamaha DV-S5270 Handleiding

Categorie
Dvd spelers
Type
Handleiding
DV-S5270
Operating Instructions
DVD/Video CD/CD Player
Before connecting, operating or adjusting this product,
please read these instructions completely.
Please keep this manual for future reference.
VQT8678-1
U
Getting Started
2
Table of contents
Getting Started
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
Remote control preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
Home theater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
Connecting an AV amplifier with a built-in decoder . . . . . . . . . . 09
Connecting audio equipment with 2-channel analog audio
input terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting audio equipment with digital audio input
terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connection to a television . . . . . . . . . . . . . . . . . . . . . . . . . . . . 012
Basic Operations
Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Stopping play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Other methods of play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Still picture (Pause) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Skipping chapters or tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Frame advance (Frame reverse) . . . . . . . . . . . . . . . . . . . . . . . 16
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Rapid advance (Rapid reverse) . . . . . . . . . . . . . . . . . . . . . . . . 17
Canceling playback control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using menus to play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Advanced Operations
Advanced operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing soundtrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Viewing from another angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Reproducing an Advanced Virtual Surround
Sound (V.S.S.) effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Repeating sections between two specific points
(A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using On-Screen Menu Icons . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Detailed descriptions of each icon . . . . . . . . . . . . . . . . . . . . . . 26
Changing initial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
1 Disc Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2 Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3 Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4 On-Screen Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
5 FL Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6 TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
7 Digital Audio Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
9 Other Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
How different kinds of software appear on your
television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
For Your Reference
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Dear Customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
Accessories
Please check and identify the supplied accessories.
¸ Remote control . . . . . . . . . . . . . . 1
¸ Batteries . . . . . . . . . . . . . . . . . . . . 2
for remote control
¸ AC power supply cord . . . . . . . . 1
¸ Audio/video cable . . . . . . . . . . . . 1
Note
³The included AC power supply cord is for use with this unit only. Do
not use it with other equipment.
User memo:
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER!
SERIAL NUMBER
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
3
Getting Started
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PLAYER TO RAIN
OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
AND ANNOYING INTERFERENCE, USE THE RECOM-
MENDED ACCESSORIES ONLY.
This player is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this player
itself is turned off. This state is called the standby mode.
In this state, this player is designed to consume a very small
quantity of power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide
slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous volt-
age” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral trian-
gle is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the ap-
pliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALI-
FIED SERVICE PERSONNEL.
Note
Use this player only in areas with the same power supply.
Units for the U.S.A. and Canada: AC 120 V, 60 Hz.
SAFETY INFORMATION
CAUTION:
DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER
PRODUCT. HOWEVER THIS DVD/VIDEO CD/CD
PLAYER USES A VISIBLE LASER BEAM WHICH
COULD CAUSE HAZARDOUS RADIATION EXPO-
SURE IF DIRECTED. BE SURE TO OPERATE THE
DVD/VIDEO CD/CD PLAYER CORRECTLY AS IN-
STRUCTED.
WHEN THIS DVD/VIDEO CD/CD PLAYER IS
PLUGGED TO THE WALL OUTLET, DO NOT
PLACE YOUR EYES CLOSE TO THE OPENING OF
THE DISC TRAY AND OTHER OPENINGS TO LOOK
INTO THE INSIDE OF THIS PLAYER.
USE OF CONTROLS OR ADJUSTMENTS OR PER-
FORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZ-
ARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
CAUTION -LASER RADIATION WHEN OPEN.
DO NOT STARE INTO BEAM.
ATTENTION-RAYONNEMENT LASER EN CAS D'OUVERTURE.
NE PAS REGARDER DANS LE FAISCEAU.
VORSICHT -LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET.
NICHT IN DEN STRAHL BLICKEN.
ADVARSEL -LASERSTRÅLING VED ÅBNING.
SE IKKE IND I STRÅLEN.
ADVARSEL -LASERSTRÅLING NÅR DEKSEL ÅPNES.
STIRR IKKE INN I STRÅLEN.
VARNING -LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD.
STIRRA EJ IN I STRÅLEN.
VARO! -AVATTAESSA OLET ALTTIINA LASERSÄTEILYLLE.
ÄLÄ TUIJOTA SÄTEESEEN.
(Inside of player)
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
Getting Started
4
SAFETY INFORMATION
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This
product, when installed as indicated in the instructions contained
in this manual, meets FCC requirements. Modifications not ex-
pressly approved by Yamaha may void your authority, granted by
the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class B
digital devices. Compliance with these requirements provides a
reasonable level of assurance that your use of this product in a
residential environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and, if not in-
stalled and used according to the instructions found in the users
manual, may cause interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not guarantee that inter-
ference will not occur in all installations. If this product is found to
be the source of interference, which can be determined by turning
the unit OFF and ON, please try to eliminate the problem by
using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the an-
tenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type
of product. If you can not locate the appropriate retailer, please
contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe
Ave, Buena Park, CA 90620
The above statements apply ONLY to those products distributed
by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Associations
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring
or distortionand, most importantly, without affecting your
sensitive hearing. Since hearing damage from
loud sounds is often undetectable until it is too
late, YAMAHA and the Electronic Industries
Associations Consumer Electronics Group
recommend you to avoid prolonged exposure
from excessive volume levels.
5
Getting Started
B
A
30°30°
Remote control preparations
»
A
Battery installation
Use of batteries
³Align the poles (i and j) properly when inserting the batteries.
³Do not mix old and new batteries or different types of batteries.
³Do not recharge ordinary dry cell batteries.
³Do not heat or disassemble the batteries. Do not allow them to con-
tact flame or water.
³Remove the batteries if the unit is not to be used for a long time.
³Do not keep together with metallic objects such as necklaces.
³Do not use rechargeable type batteries.
³Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
»
B
Correct method of use
Operation notes
³Do not place obstacles between the remote control signal sensor
and remote control unit.
³Do not expose the remote control signal sensor to direct sunlight or
to the bright light of a fluorescent light.
³Take care to keep the remote control signal sensor and end of the
remote control unit free from dust.
³If this system is installed in a rack with glass doors, the glass doors
thickness or color might make it necessary to use the remote con-
trol a shorter distance from the system.
To prevent damage
³Never place heavy items on top of the unit.
³Do not disassemble or reconstruct the unit.
³Do not spill water or other liquids into the unit.
R6/LR6, AA, UM-3
Remote control signal sensor
Transmission
window
About 23 feet
(7 meters)
in front of the
signal sensor
Getting Started
6
Disc information
º Region number supported by this player
Region numbers are allocated to DVD players and software accord-
ing to where they are sold.
³The region number of this player is “1”.
³The player will play DVDs marked with labels containing the region
number “1” or “ALL”.
Example:
º Playing DVDs and Video CDs
The producer of the material can control how these discs are played.
This means that you may not be able to control play of a disc with
some operations described in these operating instructions. Read the
discs instructions carefully.
Example: ³/ appears when you press the skip buttons to move
to the next section.
³Resume, repeat play, and markers may not work during
play of interactive DVDs and menu play of Video CDs
with playback control.
³After showing the Karaoke menu, tracks are played
successively without returning to the menu (Video CD
with playback control).
º Marks used in these operating instructions
[DVD]
: indicates features applicable to DVD only.
[VCD]: Video CD only.
[CD] : CD only.
For the purpose of these operating instructions, DVD stands for DVD-Video and CD stands for Audio CD.
º Terms used in these operating instructions
³Title/Chapter [DVD]
DVDs are divided up into large sections, titles, and smaller sections,
chapters. The numbers allocated to these sections are called title
numbers and chapter numbers.
³Track [VCD] [CD]
Video CDs and CDs are divided up into sections called tracks, and
the numbers allocated to these sections are called track numbers.
³Playback control [VCD]
If a Video CD has playback control written on its disc or jacket, it
means that particular scenes or information can be selected for
viewing interactively with the TV monitor using the menu screen.
This player can play Video CDs with playback control.
Using menus to control play of a Video CD is called menu play in
these operating instructions.
Display during menu play of a Video CD with playback control
³Interactive DVD [DVD]
An interactive DVD is DVD software which includes multiple angles,
multiple plot endings, etc. The elapsed play time of some of these
DVDs is not shown.
Display during play of an interactive DVD
Discs not supported by this
player
³Do not try to play Photo CD or CD-R.
(Data on the disc may be damaged.)
³DVD with region number other than 1 or ALL
³PAL discs ³CD-G ³Divx Video Disc
³DVD-ROM ³CD-RW ³DVD-Audio
³DVD-R ³DVD-RAM ³DVDiRW
³DVD-RW ³CD-ROM ³CVD
³SVCD ³SACD ³VSD
³CDV
etc.
Discs supported by this player
3q (8 cm) disc/
5q (12 cm) disc
3q (8 cm) disc/
5q (12 cm) disc
3q (8 cm) disc/
5q (12 cm) disc
DVD-Video
Video CD
Audio CD
Track 1 Track 2 Track 3 Track 4 Track 5
Example:
etc.
1 ALL
3
4
1
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Title 1 Title 2
Example:
DVD
7
Getting Started
POWER
STOP
PAUSE
PLAY
OPEN/CLOSE
SKIP
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
6:9 5
;
1
SLOW/
SEARCH
H/I
REPEAT
DVD
PROG.
ANGLE
96kHz 24bit
STANDBY/ON
f OPEN/CLOSE
DVD / VIDEO CD / CD
NATURAL SOUND DVD PLAYER
C
SEARCH
D
V.S.S.
D I G I T A L
:
SKIP
;
1 32 654
1
9 :
3
4
P
Q
R
T
U
V
S
6
9
G
I
K
L
M
N
O
H
5
J
;<= ?@
AB
78
CEFD
>
Page
1 Standby/On button (STANDBY/ON) . . . . . . . . . . . . . . . . . . 14
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
2 Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3 Disc tray open/close button (<OPEN/CLOSE) . . . . . . . . . 14
4 Play button (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5 Pause button (;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6 Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7 FL display
8 Virtual Surround Sound indicator (V.S.S.) . . . . . . . . . . . . . 21
9 Skip button (: SKIP 9) . . . . . . . . . . . . . . . . . . . . . . . . 16
: Search button (6 SEARCH 5) . . . . . . . . . . . . . . . . . . . 17
; Rotates during play.
Rotates fast clockwise or counterclockwise during
rapid advance (reverse).
Rotates slowly clockwise or counterclockwise
during slow-motion play. [DVD] [VCD]
Illuminates in the stop mode.
< Illuminates during playback.
Flashes when the RESUME function is ON.
= Illuminates during repeat play.
> Illuminates in the still picture (pause) mode.
? Elapsed playing time from the start of the title/track during
play
@ Audio channel information recorded in the disc being
played back (e.g. 2ch or 5.1ch)
A A DVD is loaded.
B It is possible to change the angle. [DVD]
C Illuminates during program play. [VCD] [CD]
D Title/chapter number [DVD]
Track number [VCD] [CD]
E Linear PCM of 96 kHz sampling is being played.
F Linear PCM of 24 bit is being played.
Remote control
Page
G Top menu button (TOP MENU) . . . . . . . . . . . . . . . . . . . . . . 14
H Cursor buttons (3, 4, 2, 1)/Enter button (ENTER) . . . . 14
I On screen button (ON SCREEN) . . . . . . . . . . . . . . . . . . . . . 25
J Play mode button (PLAY MODE) . . . . . . . . . . . . . . . . . . . . . 23
K Subtitle button (SUBTITLE) . . . . . . . . . . . . . . . . . . . . . . . . . 20
L Repeat button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
M A-B repeat button (A-B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
N Virtual Surround Sound button (V.S.S.) . . . . . . . . . . . . . . . 21
O Setup button (SET UP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
P Slow/Search buttons (6, 5 SLOW/SEARCH) . . . . . . . 17
Q Menu button (MENU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
R Return button (RETURN) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
S Angle button (ANGLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
T Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
U Numeric buttons (19, 0, S10) . . . . . . . . . . . . . . . . . . . . . . . 14
³To select a 2-digit number
Example: To select track 23
Press [S10], then [2] and [3].
V Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Rear (left)
Main (left)
Center
Rear (right)
Subwoofer
Main (right)
Control reference guide
Player
Buttons such as function in exactly
the same way as the buttons on the
player.
Getting Started
8
Home theater
º Settings for your Home Theater
¤1 If you have connected an AV amplifier with built-in Dolby Pro Logic decoder, you may need to connect center and rear speakers.
¤2 Connect speakers if necessary and make the speaker settings on the amplifier.
º Upgrading your television
³You can connect CRT projectors, LCD projectors, and projection televisions.
³See Connection to a television (á pages 12 and 13) for details on connection.
Note
³The equipment connections described are examples.
³Peripheral equipment and optional cables sold separately unless otherwise indicated.
º Before connections
³Ensure that this player and other equipment to be connected are switched to the standby mode or off and disconnect the AC power supply cord
before commencing connection.
³Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely.
³Read through the instructions before connecting other equipment.
³Ensure that you observe the color coding when connecting audio and video cables.
Note
³TV volume may be lower when playing DVDs than during television broadcasts. Turn the volume up while playing DVDs and reduce it to the
previous level before switching the source back to television to avoid sudden changes in volume.
³When you have finished connection, select the appropriate screen type at the initial setting 6 TV Aspect according to your television (4:3/16:9)
(á page 31). No changes are needed if you connect the player to a conventional television (4:3).
Conserving power
³The unit consumes approx. 2.0 W even when it is turned off with [STANDBY/ON]. To save power when the unit is not to be used for a long time,
unplug it from the household AC outlet.
Set up
System
To enjoy 5.1 channel
surround sound
To enjoy Dolby surround
sound
¤1
To enjoy linear PCM sound
Equipment to be connected
AV amplifier with digital input and
built-in Dolby Digital/DTS decoder
AV amplifier with digital input and
built-in Dolby Digital decoder
(without DTS decoder)
AV amplifier with built-in Dolby
Pro Logic decoder
Stereo amplifier with digital input
and built-in high sampling DA
converter rated at 96 kHz
Stereo amplifier with digital input
and built-in conventional DA
converter
Speakers
³Main L/R
³Center
¤2
³Rear L/R¤2
³Subwoofer¤2
³Main L/R
³Center
¤2
³Rear L/R¤2
³Subwoofer¤2
³Main L/R
³Center
³Rear L/R
Main L/R
Main L/R
Settings in
7 Digital Audio Output
1. PCM down ConversionYes
2. Dolby DigitalBitstream
3. DTSBitstream
1. PCM down ConversionYes
2. Dolby DigitalBitstream
3. DTSOff
1. PCM down ConversionYes
2. Dolby DigitalPCM
3. DTSOff
1. PCM down ConversionNo
2. Dolby DigitalPCM
3. DTSOff
1. PCM down ConversionYes
2. Dolby DigitalPCM
3. DTSOff
Page
9
9
10
11
11
9
Getting Started
L
AUDIO OUT
VIDEO OUT
VIDEO
S VIDEO
R
COMPONENT VIDEO
P
R
P
B
Y
OPTICAL
PCM/Î DIGITAL
DTS
SUBWOOFER
AC IN
OPTICAL
Connecting an AV amplifier with a built-in decoder
You can enjoy the 5.1-channel surround sound found on DVD recorded with Dolby Digital or DTS Digital Surround by connecting an AV amplifier
with a built-in decoder or a separate decoder-amplifier combination.
When you have finished connection
Adjust each item of “7 Digital Audio Output” to suit your decoder (á page 33).
Back of the player
Speaker
You can connect from 3 to 5 speakers including the main two.
³Main speaker (L/R)
³Center speaker
³Rear speaker (L/R)
³Subwoofer
Note when connecting the optical fiber cable
³Remove the dust protection cap from the optical digital audio
output terminal and connect the cable firmly so that the
configurations of both the cable and the terminal match.
³Keep the dust protection cap and reattach when not using the
terminal.
Dust protection cap
Align the plug with the
terminal
Optical fiber cable
³Do not bend the optical fiber cable when connecting it.
AV amplifier with a built-in decoder
³Read the instructions for the amplifier and speakers for connection
details.
AC 120 V, 60 Hz
To household
AC outlet
AC power supply
cord (included)
10
Getting Started
L
AUDIO OUT
VIDEO OUT
VIDEO
S VIDEO
R
COMPONENT VIDEO
P
R
P
B
Y
OPTICAL
PCM/Î DIGITAL
DTS
SUBWOOFER
R
L
AUDIO
IN
INPUT
R
L
AUX IN
SUB
WOOFER
INPUT
Home theater
Connecting audio equipment with 2-channel analog audio input terminals
You can enjoy stereo sound if you connect an amplifier, system component or TV that has 2-channel analog audio input terminals. By connecting a
subwoofer, you can also enjoy powerful bass.
º Connecting the amplifier, system component or TV
When you have finished connection
Adjust each item of 7 Digital Audio Output (á page 33).
AV amplifier with built-in Dolby Pro Logic
decoder
³If you connect an AV amplifier with built-in
Dolby Pro Logic decoder, you will also need to
connect center and rear speakers to enjoy
surround sound. Read the instructions for the
equipment for connection details.
³Turn off V.S.S. (á page 21) and subwoofer
output (á item C on page 27). Dolby Pro Logic
will not function correctly if they are on.
º If connecting
audio equipment
which has no
subwoofer output
terminal
Amplifier and speakers or system component
³Read the instructions for the amplifier and speakers or
system component for connection details.
Audio cable
Audio cable
Active subwoofer
³Use the On-Screen Menu Icons to turn
subwoofer output on (á item C on
page 27).
³Adjust the volume of the subwoofer to suit
your preference.
Back of the player
Television
or
Active subwoofer
³Place the subwoofer as close as possible
to the front center.
Audio cable
11
Getting Started
L
AUDIO OUT
VIDEO OUT
VIDEO
S VIDEO
R
OPTICAL
PCM/Î DIGITAL
DTS
SUBWOOFER
OPTICAL
Connecting audio equipment with digital audio input terminals
When you have finished connection
Adjust each item of 7 Digital Audio Output (á page 33).
Back of the player
Note when connecting the optical fiber cable
Dust protection cap
Align the plug with
the terminal
³Remove the dust protection cap from the optical digital audio
output terminal and connect the cable firmly so that the
configurations of both the cable and the terminal match.
³Keep the dust protection cap and reattach when not using the
terminal.
Optical fiber cable
³Do not bend the optical fiber cable when connecting it.
System component or amplifier with digital audio input
terminals and speakers
³Read the instructions for the amplifier and speakers or system
component for connection details.
12
Getting Started
L
AUDIO OUT
VIDEO OUT
VIDEO
S VIDEO
R
OPTICAL
PCM/Î DIGITAL
DTS
SUBWOOFER
AUDIO
IN
L
R
S VIDEO
IN
S video output terminal
The S (separate) video output terminal achieves a clearer
picture than the video output terminal by separating the color (C)
and luminance (Y) signals before transmitting them to the
television. (Actual results depend on the television.)
Television
Audio/video cable (included)
S video cable
Back of the player
Connect Your Player Directly To Your
Television.
If the player is connected to the television through a video cas-
sette recorder, the picture may not be played back correctly due
to the copy guard. So we strongly recommend you do not con-
nect the player to your video cassette recorder when setting up
your home entertainment system.
³Connect to the television section if you connect the player to a
combined television-video player.
Do not place the
player on amplifiers or
other equipment
which may become
hot.
The heat can damage the player.
Connecting to a television with video input terminal
Connection to a television
L
AUDIO OUT
VIDEO OUT
VIDEO
S VIDEO
R
OPTICAL
PCM/Î DIGITAL
DTS
SUBWOOFER
AUDIO
IN
L
R
VIDEO
IN
Back of the player
Audio/video cable (included)
Television
Connecting to a television with S video input terminal
13
Getting Started
L
AUDIO OUT
VIDEO OUT
VIDEO
S VIDEO
R
COMPONENT VIDEO
PR
PB Y
OPTICAL
PCM/Î DIGITAL
DTS
SUBWOOFER
AUDIO
IN
L
R
COMPONENT
VIDEO IN
YP
B PR
Component video output terminals (Y/PB/PR)
The component video output terminals output the color
difference signals (P
B/PR) and luminance signal (Y)
separately in order to achieve high fidelity in
reproducing colors.
³The description of the component video input
terminals depends on the television or monitor
(e.g. Y/P
B/PR, Y/B-Y/R-Y, Y/CB/CR and so on).
Connect to terminals of the same color.
Television
Audio/video cable (included)
Video cable
Back of the player
Connecting to a television with component video input terminals
Basic Operations
14
1
2
3
4
ENTER
POWER
STOP
PAUSE
PLAY
OPEN/CLOSE
SKIP
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
6:9 5
;
1
SLOW/
SEARCH
H/I
REPEAT
1
2
4
TOP MENU
ENTER
MENU
RETURN
:, 9
Open
Reading
Close
A
SKIP
123
456
789
0
S
10
STANDBY/ON
f OPEN/CLOSE
DVD / VIDEO CD / CD
NATURAL SOUND DVD PLAYER
C
SEARCH
D
V.S.S.
D I G I T A L
:
SKIP
;
2 431
:
SKIP
;
STANDBY/ON
f OPEN/CLOSE
Basic play
º Before enjoying DVD/Video CD/CD
The menu language for this player has been set to English, but you
can change the language to French or Spanish (á 3 Menu Lan-
guage, page 31). English has been used in the examples shown.
Preparations
³Ensure connections to your television and audio equipment are
correct.
³Turn on your television and other equipment.
³Switch the video input mode on the television to suit the type of
connection you have made (e.g., VCR 2).
1 Press [STANDBY/ON] to switch on the
power.
2 Press [< OPEN/CLOSE] to open the
disc tray.
3 Place the disc on the disc tray.
³Insert inside the guides.
³Do not load more than one disc.
4 Press [1].
The disc tray is automatically closed and play begins.
When a menu screen appears on the
»
A
TV monitor
Press the cursor buttons [3, 4, 2, 1]
and press [ENTER], or press the numeric
buttons, to select the item.
Play of the selected item now begins.
³The cursor buttons are not effective for selecting items for Video
CDs.
º Other buttons used to operate menus
Read the discs instructions for further details about operation.
[9 SKIP]: Shows the next menu.
[: SKIP]: Shows the previous menu.
[RETURN]: Shows the menu screen.
[TOP MENU]: Shows the first menu screen. [DVD]
[MENU]: Shows the menu screen. [DVD]
Note
³NO PLAY is displayed on the FL display if you load the following
kinds of discs and they cannot be played:
³
DVD for which playback is prohibited by the initial settings
2 Ratings (á page 30).
³
DVD with a region number other than 1 or ALL (á page 6).
³
If the disc is put in upside down (and it is a single sided disc).
³When appears on the TV monitor when a button is pressed, the
operation is prohibited by the player or disc.
Cursor
buttons/
5q (12 cm) disc
3q (8 cm) disc
Label must face upward.
(With double-sided discs, load
so the label for the side you
want to play is facing up.)
Numeric
buttons
15
Basic Operations
A
B
2
1
C
Press PLAY to Chapter Preview
POWER
STOP
PAUSE
PLAY
OPEN/CLOSE
SKIP
TOP MENU
MENU
6:9 5
;
1
SLOW/
SEARCH
H/I
POWER
STOP
PAUSE
PLAY
OPEN/CLOSE
SKIP
TOP MENU
MENU
6:9 5
;
1
SLOW/
SEARCH
H/I
STOP PLAY
1
2
POWERH/I
STANDBY/ON
f OPEN/CLOSE
DVD / VIDEO CD / CD
NATURAL SOUND DVD PLAYER
C
SEARCH
D
V.S.S.
D I G I T A L
:
SKIP
;
STANDBY/ON
f OPEN/CLOSE
DVD / VIDEO CD / CD
NATURAL SOUND DVD PLAYER
C
SEARCH
D
V.S.S.
D I G I T A L
:
SKIP
;
1∫
STANDBY/ON
2
Basic play
»
A
Stopping play
Press [º] during play.
³The player records the point where [º] was pressed during play.
(! flashes on the players FL display.)
To resume play from where you stopped it
»
B
(RESUME function)
Press [1] while ! is flashing on the FL display.
Play will resume from the point where [º] was pressed.
To clear the RESUME function
Press [º] again or open the disc tray while ! is flashing on the FL
display.
Note
³The RESUME function works only with titles for which the elapsed
playing time appears on the players FL display during playback.
³This feature remains active if the player is switched to the standby
mode and then turned back ON.
»
C
Chapter preview function
[DVD ]
This function plays the first few seconds of each chapter from the
beginning of the title up to the point where operation was stopped.
This makes it possible to review previous chapters.
1. Press [1] while ! is flashing on the FL display.
(The message illustrated is briefly displayed.)
2. Press [1] again while the message is displayed on the
screen.
Normal playback will commence from the point where operation was
stopped.
Note
³Canceling the RESUME function will also clear the chapter preview
function.
³The chapter preview function may not work with some DVDs.
º After operation
When the player is not in use, remove the disc and press
[STANDBY/ON] to switch the player to the standby mode.
The player is automatically switched to the standby mode after
30 minutes or so have elapsed in the stop mode.
(Auto power-off function)
Note
³The disc continues to rotate while the menu is displayed even after
the player has finished playing a particular item. Stop the player
when you finish viewing to preserve the players motor and prevent
screen burn.
Basic Operations
16
[
:
][
9
]
POWER
STOP
PAUSE
PLAY
OPEN/CLOSE
SKIP
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
6:9 5
;
1
SLOW/
SEARCH
H/I
REPEAT
A
B
C
PLAY
1
PAUSE
SKIP
:9
;
:, 9
SKIP
STANDBY/ON
f OPEN/CLOSE
DVD / VIDEO CD / CD
NATURAL SOUND DVD PLAYER
C
SEARCH
D
V.S.S.
D I G I T A L
:
SKIP
;
:
SKIP
;
1
PAUSE
;
;
Other methods of play
Features on the next few pages are accessed mainly by using the
remote control.
»
A
Still picture (Pause)
Press [; PAUSE] during play.
To return to normal play
Press [1 PLAY].
»
B
Skipping chapters or tracks
Press [:, 9 SKIP] or [: SKIP
9], during play or while paused.
For your reference
³When [:, 9 SKIP] or [: SKIP 9] on the player is
pressed during menu play of Video CDs with playback control, a
menu screen may sometimes be recalled.
»
C
Frame advance (Frame reverse)
[DVD ] [VCD]
Press the cursor buttons [2, 1] while
paused.
³The disc is advanced (reversed) by one frame each time the cursor
buttons [2, 1] are pressed.
³When the cursor buttons [2, 1] are kept pressed, consecutive
frame advance (reverse) works.
To return to normal play
Press [1 PLAY].
For your reference
³Pressing [; PAUSE] also activates frame advance.
³Whether the pictures are advanced by a Frame or Field is
automatic, but you can change the initial settings to choose how the
picture is advanced (á page 34).
Reverse Forward
Cursor
buttons
Reverse
(DVD only)
Forward
Play position
twice once twiceonce
Chapter/track Chapter/track Chapter/track
17
Basic Operations
A
B
POWER
STOP
PAUSE
PLAY
OPEN/CLOSE
SKIP
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
6:9 5
;
1
SLOW/
SEARCH
H/I
REPEAT
6, 5
SLOW/SEARCH
PLAY1
STANDBY/ON
f OPEN/CLOSE
DVD / VIDEO CD / CD
NATURAL SOUND DVD PLAYER
C
SEARCH
D
C
SEARCH
D
V.S.S.
D I G I T A L
:
SKIP
;
1
65
SLOW/
SEARCH
65
SLOW/
SEARCH
Other methods of play
»
A
Slow-motion play
[DVD] [VCD]
Press [6, 5 SLOW/SEARCH] or
[6 SEARCH 5] while paused
(á page 16).
³Each press increases the speed of slow-motion.
³There are five speeds of slow-motion.
To return to normal play
Press [1 PLAY].
For your reference
³When [6, 5 SLOW/SEARCH] or [6 SEARCH 5] on the
player is pressed during menu play of Video CDs with playback
control, a menu screen may sometimes be recalled.
»
B
Rapid advance (Rapid reverse)
Press [6, 5 SLOW/SEARCH] or
[6 SEARCH 5] during play.
³Each press increases the speed of the search.
³There are five speeds of advance (reverse).
To return to normal play
Press [1 PLAY].
For your reference
³When [6, 5 SLOW/SEARCH] or [6 SEARCH 5] on the
player is pressed during menu play of Video CDs with playback
control, a menu screen may sometimes be recalled.
³For DVDs and Video CDs, audio will be heard during searching (for-
ward direction only) at the initial search speed. (To turn audio off,
á “2 Audio during Search”, on page 34.)
ForwardReverse
(DVD only)
ForwardReverse
18
Basic Operations
POWER
STOP
PAUSE
PLAY
OPEN/CLOSE
SKIP
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
6:9 5
;
1
SLOW/
SEARCH
H/I
REPEAT
A
B
C
2
2
1
1
ENTER
1
1
2
1
2
TOP MENU
MENU
TOP MENU
MENU
123
456
789
0
S
10
The discs top
menu
Title 1
Example: if you press the buttons while you are playing title 2
Menu
Title 2 Title 3
Menu Menu
STOP
Other methods of play
»
A
Canceling playback control
[VCD]
1 Press [º STOP] after the menu screen
appears (after step 4 on page 14).
PBC will be cleared from the players FL display.
2 Press the numeric buttons to select a
track
(á item 7 on page 7 for number entry).
Play begins.
³Refer to the jacket etc. of the disc concerned for the track
numbers.
³Press [1] to start play from the beginning of the disc.
To return to menu play
Press [º STOP] to stop play, press [MENU], and press the numeric
buttons to select an item.
PBC lights on the players FL display.
»
B
Using menus to play
[DVD]
By calling up menus during play, you can start play from a specific
title or chapter, or change the soundtrack and subtitle languages.
Press [TOP MENU] or [MENU] during
play to display the menu.
³Press again to return to what you were watching.
Press the cursor buttons [3, 4, 2,
1] to select an item and press
[ENTER].
The selected item is confirmed.
³Repeat if other menus are shown.
DVDs can have several menus. The menu displayed when you press
[TOP MENU] may be different to the menu displayed when you press
[MENU]. [C]
For your reference
³Menu content depends on the disc. These operating instructions
describe the basic steps.
³Both buttons take you to the same menu if the disc has only one
menu.
19
Advanced Operations
A
2
1
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
REPEAT
AUDIO
ENTER
B
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
AB
REPEAT
1
ENTER
Hello
1
Î Digital
ENG
3/2.1ch
2
FRA
Bonjour
Î Digital
3/2.1ch
AUDIO
AUDIO
AUDIO
1
U
Vocal
ON
L R
Advanced operations
»
A
Changing soundtrack
[DVD]
Some DVDs have more than one soundtrack recorded on them, and
you can change soundtrack during play.
Press [AUDIO] during play to display the
current soundtrack.
The number changes each time you press the button.
³You can also use the cursor buttons [3, 4], or the numeric buttons
to change the soundtrack.
To clear the display
Press [ENTER].
For your reference
³You can only select languages or sound formats if they have been
recorded on the disc you are playing.
³If resume (á page 15) is canceled or if you stop play of an interac-
tive DVD, the soundtrack revert to the initial settings. (á page 29)
³Some discs allow changes to soundtrack only by using the discs
menus.
Switching vocals ON or OFF for Karaoke
»
B
discs
[DVD] [VCD]
1. Press [AUDIO] during play.
2. Press the cursor buttons [3, 4, 2, 1] or press [AUDIO] to
change the setting.
DVD Karaoke [2, 1]
³Solo ³Duet
–––: Vocal OFF –––: Vocal OFF
ON: Vocal ON 1r2: Vocal 1, 2 ON
V1: Vocal 1 only ON
V2: Vocal 2 only ON
³Choose “––” for Karaoke.
³Choose V1 or V2 to duet with the player.
Video CD ([3, 4] or [AUDIO])
LR: Vocals (Vocals seem to come from the right)
L: No Vocals
R: Vocals (Vocals seem to come from both left and right)
³Choose L for Karaoke.
To clear the display
Press [ENTER].
For your reference
³Karaoke discs may show a menu after each track. Some will have a
menu that allows you to play all the tracks.
³Some discs require different operations to those described. Read
the discs instructions for details.
DVD
Video CD
Soundtrack being
played back
(“–” indicates a soundtrack
is not recorded.)
Cursor
buttons/
Numeric
buttons
20
Advanced Operations
A
2
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
REPEAT
ENTER
B
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
AB
REPEAT
2
1
SUBTITLE
C
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
REPEAT
I love you
1
ENG
ON
2
FRA
ON
Je taime
1
SUBTITLE
ANGLE
3
ANGLE
1
SUBTITLE
ENTER
Advanced operations
»
A
Changing subtitle language
[DVD]
Some DVDs have more than one subtitle language recorded on
them, and you can change subtitle language during play.
Press [SUBTITLE] during play to display
the current language number.
The number changes each time you press the button.
³You can also use the cursor buttons [3, 4] or the numeric buttons
to change the language number.
To clear the display
Press [ENTER].
»
B
To clear/display the subtitles
1. Press [SUBTITLE].
2. Press the cursor buttons [2, 1] to select ON or OFF.
Note
³In some cases, the subtitle language is not changed to the selected
one immediately.
³When a disc supporting closed captions is played, the subtitles and
closed captions may overlap each other on the TV monitor. In this
case, turn the subtitles off.
For your reference
³You can only select languages if they have been recorded on the
disc you are playing.
³If resume (á page 15) is canceled or if you stop play of an interac-
tive DVD, the subtitle languages revert to the initial settings
(á page 29).
³Some discs allow changes to subtitle languages only by using the
discs menus.
»
C
Viewing from another angle
[DVD]
Some DVDs allow you to view the same scene from different angles.
ANGLE lights on the FL display to indicate that the feature is
available.
Press [ANGLE] during play to display the
current angle number.
The number changes each time you press the button.
³You can also use the cursor buttons [3, 4] or the numeric buttons
to change the angle.
To clear the display
Press [ENTER].
For your reference
³You can only select angles if they have been recorded on the disc
you are playing.
³Some discs allow you to set angles before multi-angle scenes are
played.
³Some discs allow changes to angles only by using the discs
menus.
Cursor
buttons/
Numeric
buttons
Numeric
buttons
Subtitle language number being played back
(“––” indicates subtitles are not recorded)
Cursor
buttons/
Angle number being played back
21
Advanced Operations
PLAY MODE
SUBTITLE
AUDIO ANGLE
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
REPEAT
B
A
V.S.S. indicator
V.S.S.
a
b
c
A
STANDBY/ON
f OPEN/CLOSE
DVD / VIDEO CD / CD
NATURAL SOUND DVD PLAYER
C
SEARCH
D
V.S.S.
D I G I T A L
:
SKIP
;
V.S.S.
Advanced operations
»
A
Reproducing an Advanced Virtual
Surround Sound (V.S.S.) effect
[DVD] (Dolby Digital, 2-channel or over only)
Use this feature to enjoy a surround-like effect if you are using two
main speakers.
Press [V.S.S.] during play.
Each time this button is pressed, the players FL display changes:
a V.S.S. 1 (Natural effect)
b V.S.S. 2 (Emphasized effect)
c V.S.S. is canceled
³The V.S.S. indicator lights up green when the V.S.S. function is ac-
tivated.
Note
³V.S.S. effect does not work with Karaoke DVDs.
³V.S.S. will not work or will have less effect with some discs.
³Turn off the TV surround sound and other surround sound effects
when using this effect.
³Sound will only come from the two main speakers if V.S.S. is on.
For your reference
[B]
³For optimum effect, it is recommended that the distance between
the television and the listening position be about 3 to 4 times the
distance between the right and left main speakers.
³You can also change the V.S.S. level with the On-screen Menu
Icons [á f Virtual Surround Sound (V.S.S.), page 27].
³V.S.S. effects
Stereo discs
Surround signal
recorded discs
V.S.S. 2
The surround-like
effect in V.S.S. 1 is
increased.
V.S.S. 1
The main speakers
sound further apart.
Surround sound
seems to come
from the side.
SpeakerSpeaker
Listening position
3 to 4 times distance A
22
Advanced Operations
A
B
2
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
REPEAT
C
REPEAT
T
A
T
A
A
OFF
PRG
PRG
PRG
A
A
OFF
T
A
b
c
d
e
f
g
h
i
j
k
l
C
T
OFF
a
1
AB
A
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
REPEAT
1·2
A-B
A-B
REPEAT
REPEAT
Advanced operations
»
A
Repeat play
Press [REPEAT] during play.
Each time this button is pressed, the TV monitor changes as illustrat-
ed and the disc will repeat a chapter or title (DVD) or a track (Video
CD/CD).
Repeat play starts when the display changes.
³DVD
a Normal play
b Repeat of chapter being played
c Repeat of title being played
d Cancel repeat mode (Normal play)
³Video CD/CD
e Normal play
f Repeat of track being played
g Repeat of entire disc contents
h Cancel repeat mode (Normal play)
To return to normal play
Press [REPEAT] until OFF is displayed.
Note
³Repeat play may not work correctly with some DVDs.
³Repeat play does not work with an interactive DVD or during menu
play of a Video CD with playback control.
³There is no mode for repeating the whole DVD.
»
B
To enjoy program repeat play
[VCD] [CD]
If [REPEAT] is pressed during program play (á page 23), the display
changes as illustrated.
i Program play
j Repeat of track being played
k Repeat of all programmed tracks
l Cancel repeat mode (Program play)
To return to program play
Press [REPEAT] until OFF is displayed.
»
C
Repeating sections between two
specific points (A-B repeat)
1 Press [A-B] during play at the point
where repeat play is to start (A).
2 Press [A-B] at the point where repeat
play is to be concluded (B).
Repeat play of the section between points A and B starts.
To return to normal play
Press [A-B] until & is displayed.
Note
³A-B repeat play does not work with an interactive DVD.
³Some subtitles recorded around point A or B may fail to appear
(DVD).
³A-B repeat play works only within a title (DVD) or a track (Video CD/
CD).
For your reference
³The end of a track or title is automatically determined as point B.
23
Advanced Operations
2
3
1
123
456
789
0
S
10
Choose a track, then press ENTER.
Time
Track
Press PLAY to start
Clear
Clear all
Total time
1
2
3
4
5
6
7
8
5 2:02
2:02
Choose a track, then press ENTER.
Time
Track
Press PLAY to start
Clear
Clear all
Total time
1
2
3
4
5
6
7
8
PLAY MODE
PROG.
PROG.
POWER
STOP
PAUSE
PLAY
OPEN/CLOSE
SKIP
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
6:9 5
;
1
SLOW/
SEARCH
H/I
REPEAT
1
3
2
ENTER
STOP
CANCEL
PLAY
1
6
,
5
SLOW/SEARCH
Advanced operations
Program play
[VCD] [CD]
The player plays the tracks on the disc in the order you specify. Up to
32 tracks can be programmed.
If you enter over 32 tracks, the last programmed track is replaced
with the new one.
1 Press [PLAY MODE] while stopped
until the illustrated screen appears.
³If / appears on the television, press [º STOP] to cancel
the RESUME function, then press [PLAY MODE].
2 Press the numeric buttons to select
the track
(á item 7 on page 7 for number entry).
The selected track is stored in memory.
³If you press [ENTER], you can use the cursor buttons [3, 4]
to select a track. Press [ENTER] to register the track
number.
³Repeat step 2 to select another track.
3 Press [1 PLAY].
Play now begins in the programmed sequence.
To exit the screen
Press [PLAY MODE] twice.
To add tracks
1. Press [º STOP] twice during program play to show the program
play screen.
2. Select the available item with the cursor buttons [3, 4], then
repeat step 2.
³Press [6, 5 SLOW/SEARCH] to turn the pages of the program
to make selection quicker.
To return to normal play
1. Press [º STOP] twice during program play.
(Program play is suspended.)
2. Press [PLAY MODE] twice.
3. Press [1 PLAY].
³The program is retained in memory.
Operation by observing the units FL display
³Use the numeric buttons to enter track numbers.
³To check the program, press the cursor buttons [3, 4].
Clearing the program
When the program play screen is displayed
³To clear the programmed tracks one by one
Select the track, move to Clear with the cursor buttons and press
[ENTER].
(Selecting the track and pressing [CANCEL] also clears the pro-
grammed track.)
³To clear the whole program
Move to Clear all with the cursor buttons and press [ENTER].
(The program is also cleared when the player is switched to the
standby mode or turned off, or the disc tray is opened.)
Cursor
buttons/
Track No.
Program No.
Flashes
FL display (e.g. CD)
24
Advanced Operations
POWER
STOP
PAUSE
PLAY
OPEN/CLOSE
SKIP
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
6:9 5
;
1
SLOW/
SEARCH
H/I
REPEAT
2
1
1
2
STOP
Random Playback
Press PLAY to start
PLAY MODE
PLAY
1
Advanced operations
Random play
[VCD] [CD]
The player plays the tracks on the disc in random order.
1 Press [PLAY MODE] while stopped
until the illustrated screen appears.
³If / appears on the television, press [º STOP] to cancel
the RESUME function, then press [PLAY MODE].
2 Press [1 PLAY].
Play now begins in random order.
To exit the screen
Press [PLAY MODE] once.
To return to normal play
1. Press [º STOP] twice during random play.
(Random play is suspended.)
2. Press [PLAY MODE] once.
3. Press [1 PLAY].
25
Advanced Operations
Using On-Screen Menu Icons
On-Screen Menu Icons
On-Screen Menu Icons are long thin menus that contain information
about the disc or player. These menus allow you to perform opera-
tions by changing this information.
Examples of On-Screen Menu Icons
[A]
The screens depend on the disc contents.
»
B
Common procedures
1 Press [ON SCREEN] during play or in
the stop mode.
Each time this button is pressed, the TV monitor changes as
shown below.
[>On-Screen Menu Icons for disc information
l;
l On-Screen Menu Icons for player information
l;
l Shuttle screen
l;
{= On-Screen Menu Icons cleared
³Some functions cannot be accessed from the stop mode.
2 Press the cursor buttons [2, 1] to se-
lect the item.
The item is highlighted in yellow.
3 Press the cursor buttons [3, 4] to se-
lect the setting.
³For some functions, the setting will be registered immediate-
ly; for others, [ENTER] or [1 PLAY] must be pressed.
³When numbers are displayed (e.g. title No.), the numeric
buttons are also effective for setting instead of the cursor
buttons [3, 4]. When numbers are entered with numeric
buttons, press [ENTER] to register the setting.
To clear the On-Screen Menu Icons
Press [RETURN] or [CANCEL].
For your reference
³The On-Screen Menu Icons may not be displayed when playing
some kinds of DVD software, or if the television’s automatic picture
zoom function is on. Change the position of the On-Screen Menu
Icons in “4 On-Screen Messages” if this occurs (á page 31).
³The color (blue, violet or green) of the On-Screen Menu Icons can
be changed (á page 31).
³# $” around the icon means that the item can be changed using
the cursor buttons [3, 4].
A
2
3
1
B
1
3:37
L R
OFF
PBC
PRG
1
3:37
F
PRG
µ
40
p
40
µ
50
p
50
N
OFF
OFF
30 1:06:37
1
Î Digital
ENG
1
3/2.1ch
OFF
ENG
1
ON
1
N
µ
100
p
100
OFF
DVD
Video CD
CD
STOP
PAUSE
PLAY
SKIP
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
6:9 5
;
1
SLOW/
SEARCH
REPEAT
2·3
1
CANCEL
RETURN
1PLAY
ON
ON
OFF ON
ON SCREEN
2
Numeric
buttons
26
Advanced Operations
Detailed descriptions of each icon
Screen for disc information
º DVD
a Title No.
Change the No. with the cursor buttons [3, 4] or the numeric
buttons and press [ENTER].
b Chapter No.
Change the No. with the cursor buttons [3, 4] or the numeric
buttons and press [ENTER].
c Time
(hour:minute:second)
Enter the time from which you want to start play and press
[ENTER].
Example: To specify 1 hour 6 min. 37 sec., enter 10637.
d Soundtrack No.
Change the No. with the cursor buttons [3, 4] or the numeric
buttons.
e Soundtrack
º Video CD/CD
k Track No.
Change the No. with the cursor buttons [3, 4] or the numeric
buttons and press [ENTER].
l Time
(minute:second)
Display is changed each time the cursor buttons [3, 4] are
pressed. (The times cannot be changed.)
Elapsed playing time(------------)Remaining time of the track
^-------------)Remaining time of the disc(-------------J
Note
³The information actually displayed depends on the disc.
³During program and random play of Video CDs and CDs, the re-
maining time of the disc is not displayed.
Using On-Screen Menu Icons
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI: Chinese
KOR: Korean
MAL: Malay
VIE: Vietnamese
THA: Thai
¢: Others
f Audio attribute
Shows the audio attributes of the selected soundtrack.
LPCM/ë Digital/DTS: Signal type
k: Sampling frequency (kHz)
b: Number of bits (bit)
ch: Number of channels¤
Vocal: Vocals indication
³You can switch vocals ON or OFF with the cursor buttons
[3, 4].
[DVD Karaoke (Solo)]: ––– (OFF) or ON
[DVD Karaoke (Duet)]: ––– (OFF), V1iV2, V1 or V2
g Subtitle language No.
Change the No. with the cursor buttons [3, 4] or the numeric
buttons.
h Subtitle on/off
Select ON or OFF with the cursor buttons [3, 4].
OFF: Subtitle is cleared.
ON: Subtitle is displayed.
i Subtitle language
See the table under item e.
j Angle No.
Change the No. with the cursor buttons [3, 4] or the numeric
buttons.
m Audio mode [VCD]
Change the mode with the cursor buttons [3, 4].
LR: Left channel sound is output from the left speaker (L), and
right channel sound is output from the right speaker (R).
L: Left channel sound only is output from the speakers (L/R).
R: Right channel sound only is output from the speakers (L/R).
n Playback control [VCD]
Shows whether menu play is on or off (cannot be changed here).
OFF: Menu play is OFF.
ON: Menu play is ON.
¤Example:
3/2 .1ch
.1: Subwoofer signal (not displayed if there is no
subwoofer signal)
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right)
.1: Center
.2: Main leftiMain right
.3: Main leftiMain rightiCenter
30 1:06:37
1
Î Digital
ENG
1
3/2.1ch
ENG
1
ON
1
ab c def ghij
1
3:37
L R
OFF
PBC
klmn
27
Advanced Operations
Screen for player information
Note
³A-B repeat play does not work with an interactive DVD.
³Repeat play and marker functions do not work with an interactive DVD or during menu play of a Video CD with playback control.
³Cinema dialogue is effective with Dolby Digital, three channels or over, where the dialogue is recorded in the center channel.
Shuttle screen
a AB repeat play
Press [ENTER] during play to store location A and press [ENTER]
again to store location B. Repeat play between the two locations
starts. Press [ENTER] again to return to normal play.
b Repeat play
Select the mode during play with the cursor buttons [3, 4].
[DVD]
OFF: Normal play
C: Chapter repeat play
T: Title repeat play
[VCD] [CD]
OFF: Normal play
T: Track repeat play
A: Disc repeat play
c Cinema dialogue
[DVD]
Select the mode during play with the cursor buttons
[3, 4].
OFF: Normal volume
ON: Louder volume for dialogue
Play mode
[VCD] [CD] (á pages 23 and 24)
The current play mode is shown (cannot be
changed here).
PRG: Program play
RND: Random play
–––: Normal play
k Rapid reverse
Press the cursor buttons [4]>[2].
l Play
Press the cursor button [4].
m Rapid advance
Press the cursor buttons [4]>[1].
h Slow-motion play (Backward) [DVD]
Press the cursor buttons [3]>[2].
i Still/Pause
Press the cursor button [3].
j Slow-motion play (Forward) [DVD] [VCD]
Press the cursor buttons [3]>[1].
Maximum speed
DVD: j100
Video CD: j40
CD: j50
Maximum speed
DVD: i100
Video CD: i40
CD: i50
For your reference
³Each time the cursor buttons [2, 1] are pressed, the speed of rapid reverse/advance and slow-motion play increases up to 5 steps.
d Marker (Marking parts you want to watch or listen to again)
Press [ENTER] during play and press [ENTER] again at the pre-
ferred point to store a marker. (Marker no. replaces ¢.) (Up to
5 markers can be stored in the memory.)
To store the next marker, press the cursor button [1].
³To recall a marker
Select the marker no. with the cursor buttons [2, 1] and press
[ENTER].
³To clear a marker
Select the marker no. with the cursor buttons [2, 1] and press
[CANCEL].
³Some subtitles recorded around the marker may fail to appear.
³All the markers are cleared when the player is switched to the
standby mode or turned off, or the disc tray is opened.
e Cinema image
[DVD] [VCD]
Select the mode with the cursor buttons [3, 4] while a disc is
loaded.
N: Normal mode
C: Cinema mode (Cinema image): Picture for viewing movies
f Virtual Surround Sound (V.S.S.)
[DVD] (Dolby Digital, 2-channel or over only) (á page 21)
Select the level during play with the cursor buttons [3, 4].
OFF: V.S.S. off
1: V.S.S. natural effect
2: V.S.S. emphasized effect
g Turning subwoofer output on and off (á page 10)
Select ON or OFF with the cursor buttons [3, 4].
ON: If you have connected a subwoofer
OFF: If you have not connected a subwoofer
OFF
_
_
_
µ
100
p
100
h ji
k ml
OFFOFF
N
OFF
ab gfedc
ON
28
Advanced Operations
2
1
1 Disc Languages
Level 8
2 Ratings
3 Menu Language
4 On-Screen Messages
5 FL Display
6 TV Aspect
7 Digital Audio Output
Press RETURN to exit
9 Other Settings
English
Bright
4:3
ENTER
3
ENTER
POWER
STOP
PAUSE
PLAY
OPEN/CLOSE
SKIP
TOP MENU
MENU
PLAY MODE
SUBTITLE
AUDIO ANGLE
ENTER
RETURNON SCREEN
123
A-B
V.S.S.
456
789
SET UP
CANCEL
0
S
10
6:9 5
;
1
SLOW/
SEARCH
H/I
REPEAT
RETURN
1
2·3
SET UP
Changing initial settings
Change the initial settings to suit your preference and to suit the play-
er to the environment in which it is being used.
Common procedures
1 Press [SET UP] in the stop mode.
The initial settings screen is displayed.
2 Press the cursor buttons [3, 4] to se-
lect the item and press [ENTER].
Each item that can be modified is displayed.
1 Disc Languages (á page 29)
Change the soundtrack language, subtitle language and
the language used in the discs menu to be used for every
disc played back.
2 Ratings (á page 30)
Change the ratings level to prevent play of discs, skip vio-
lent scenes, or replace scenes with others by entering a
password. This is also called a parental lock.
3 Menu Language (á page 31)
Change the language used for the on-screen displays and
initial settings menus.
4 On-Screen Messages (á page 31)
Choose whether Play, Still and other displays will be
displayed or not, and the color and position of these dis-
plays as well as On-Screen Menu Icons.
5 FL Display (á page 31)
Change the brightness for the FL display.
6 TV Aspect (á page 31)
Change the settings to suit the type of television you have
connected.
7 Digital Audio Output (á page 32)
Change the settings to suit the type of digital equipment
you have connected.
9 Other Settings (á page 34)
Choose the kind of picture shown when play is paused,
and various other settings to enhance your viewing expe-
rience.
3 Press the cursor buttons [3, 4] to se-
lect the setting and press [ENTER].
³Some items require additional steps.
(See the respective page.)
Setting is finished and the initial settings screen is displayed.
To cancel during setup operation
Press [RETURN]. (The previous screen is displayed.)
To exit the initial settings screen
Press [SET UP] or [RETURN].
Note
³There is no No. 8 in the initial settings menu of this player.
For your reference
³The numeric buttons can also be used instead of the cursor buttons
[3, 4] for selecting items or settings. Pressing [ENTER] is not
necessary.
Numeric buttons
29
Advanced Operations
1 Disc Languages
[DVD ]
See page 28 for operation.
1 Audio
2 Subtitle
3 Menus
1 English (Factory preset) 2 French 3 Spanish
4 Original
The original language of each disc will be selected.
5 Other ¢¢¢¢
Another language can be selected.¤
1 Automatic (Factory preset)
Subtitle language will automatically be selected in accordance with the
soundtrack language.
³If the language selected for the 1 Audio is actually used during playback,
the subtitles will not appear.
³If another language is used during playback, the subtitles will appear in the
language selected at the setup 1 Audio.
2 English 3 French 4 Spanish
5 Other ¢¢¢¢
Another language can be selected.¤
1 English (Factory preset) 2 French 3 Spanish
4 Other ¢¢¢¢
Another language can be selected.¤
Language code list
6565: Afar
6566: Abkhazian
6570: Afrikaans
6577: Ameharic
6582: Arabic
6583: Assamese
6588: Aymara
6590: Azerbaijani
6665: Bashkir
6669: Byelorussian
6671: Bulgarian
6672: Bihari
6678: Bengali; Bangla
6679: Tibetan
6682: Breton
6765: Catalan
6779: Corsican
6783: Czech
6789: Welsh
6865: Danish
6869: German
6890: Bhutani
6976: Greek
6978: English
6979: Esperanto
6983: Spanish
6984: Estonian
6985: Basque
7065: Persian
7073: Finnish
7074: Fiji
7079: Faroese
7082: French
7089: Frisian
7165: Irish
7168: Scots Gaelic
7176: Galician
7178: Guarani
7185: Gujarati
7265: Hausa
7273: Hindi
7282: Croatian
7285: Hungarian
7289: Armenian
7365: Interlingua
7378: Indonesian
7383: Icelandic
7384: Italian
7387: Hebrew
7465: Japanese
7473: Yiddish
7487: Javanese
7565: Georgian
7575: Kazakh
7576: Greenlandic
7577: Cambodian
7578: Kannada
7579: Korean
7583: Kashmiri
7585: Kurdish
7589: Kirghiz
7665: Latin
7678: Lingala
7679: Laotian
7684: Lithuanian
7686: Latvian, Lettish
7771: Malagasy
7773: Maori
7775: Macedonian
7776: Malayalam
7778: Mongolian
7779: Moldavian
7782: Marathi
7783: Malay
7784: Maltese
7789: Burmese
7865: Nauru
7869: Nepali
7876: Dutch
7879: Norwegian
7982: Oriya
8065: Punjabi
8076: Polish
8083: Pashto, Pushto
8471: Tajik
8472: Thai
8473: Tigrinya
8475: Turkmen
8476: Tagalog
8479: Tonga
8482: Turkish
8484: Tatar
8487: Twi
8575: Ukrainian
8582: Urdu
8590: Uzbek
8673: Vietnamese
8679: Volapük
8779: Wolof
8872: Xhosa
8979: Yoruba
9072: Chinese
9085: Zulu
8084: Portuguese
8185: Quechua
8277: Rhaeto-Romance
8279: Romanian
8285: Russian
8365: Sanskrit
8368: Sindhi
8372: Serbo-Croatian
8373: Singhalese
8375: Slovak
8376: Slovenian
8377: Samoan
8378: Shona
8379: Somali
8381: Albanian
8382: Serbian
8385: Sundanese
8386: Swedish
8387: Swahili
8465: Tamil
8469: Telugu
Disc Languages
1 Audio
2 Subtitle
3 Menus
Automatic
English
Press RETURN to exit
English
¤Enter the language code if you select Other. (See the language code list below.) Press [CANCEL]
if you enter the wrong number.
Note
³If the language selected is not available on the disc, the language designated by each disc will be
selected.
There are cases where the language is recorded but the disc designates another language.
30
Advanced Operations
The player is locked.
Remember the password.
Ratings
Press ENTER to continue
4 3 4 3
Changing ratings (When the level is 0 to 7)
Changes to the settings also requires a password.
1 Press the cursor buttons [3, 4] to select 2 Ratings in the
initial settings screen and press [ENTER].
2 Enter your 4-digit password with the numeric buttons and
press [ENTER].
3 Press the cursor buttons [3, 4] to select the item.
To unlock the player (the rating level returns to 8)
Select 1 and then press [ENTER].
To change the password
Select 2 and press [ENTER]. Enter a new 4-digit password and press [ENTER], then press
[ENTER] again.
To change the rating level
Select 3 and press [ENTER]. Select a new level with the cursor buttons [3, 4], then press
[ENTER].
To unlock the player temporarily
Select 4 and then press [ENTER].
³The rating is unlocked temporarily for the current disc. The player is locked again when the disc
tray is opened or the player is switched to the standby mode or turned off.
Example: 4343
Setting ratings (When the level is 8)
Level 8 (Factory preset)
All DVDs can be played.
Level 7 to 1
Prevents play of DVDs with ratings recorded on them (those that contain adult or violent scenes).
Level 0
Playback of all DVDs is prohibited (e.g. to prohibit playback of DVDs for adults which are not
encoded with rating information).
Note
³The rating method differs from disc to disc. There are discs designed for adults that do not have these
ratings recorded on them. These discs can be played as normal. To prevent play of these discs, set the
rating limit to 0 Lock All.
2 Ratings
[DVD ]
See page 28 for operation.
1 Select the level with the cursor buttons [3, 4] and press
[ENTER].
2 Enter a 4-digit password with the numeric buttons and
press [ENTER].
³Press [CANCEL] if you enter the wrong number.
The lock symbol appears closed to show the rating is locked.
Do not forget your password.
3 Press [ENTER].
Setting is finished and the initial settings screen is displayed.
Now when you insert a DVD that exceeds the ratings limits
you set, a message appears on the television.
If you want to play the disc, select Yes and enter your pass-
word. The unit will unlock temporarily, locking again when the
disc tray is opened or the unit is turned off.
Changing initial settings
Please set a rating limit
8 No Limit
7
6
5
4
3
2
1
0 Lock All
Press RETURN to exit
Ratings
Enter a 4-digit password,
then press ENTER.
Press RETURN to exit
Ratings
1 Unlock Player
2 Change Password
3 Change Level
4 Temporary Unlock
Press RETURN to exit
Your selection exceeds the
players rating limit. Do you
want to change the limit?
Yes
No
31
Advanced Operations
5 FL Display
See page 28 for operation.
1 Bright (Factory preset)
2 Dim
3 Menu Language
See page 28 for operation.
1 English (Factory preset)
2 Français
3 Español
1On (Factory preset)
2 Off
1 Blue (Factory preset)
2 Violet
3 Green
4 Blue
5 Violet Shown slightly lower. Select if the
top of the screen is cut off.
6 Green
1 On-Screen Messages
2 Color and Position
4 On-Screen Messages
See page 28 for operation.
Example: If you selected 2 Français
1 4:3: (Factory preset)
Select when a conventional television is connected.
2 16:9:
Select when a wide-screen television is connected.
For your reference
³For further details on the images which appear on the TV screen, see page 35.
³The optimum settings for your television may differ to those shown above.
6 TV Aspect
See page 28 for operation.
Preparation
³Switch the video input mode on the television to suit the type of connection you have made (e.g.,
VCR 2).
Press RETURN to exit
Select the language
for these Menus.
1 English
2 Français
3 Español
Choisissez la langue des
menus du lecteur.
1 English
2 Français
3 Español
Appuyez sur RETURN pour quitter
On-Screen Messages
1
On-Screen Messages
2
Color and Position Blue
On
Press RETURN to exit
FL Display
Press RETURN to exit
1 Bright
2 Dim
Select your TV aspect
1 4 : 3
2 16 : 9
Press RETURN to exit
32
Advanced Operations
Changing initial settings
7 Digital Audio Output
See page 28 for operation.
1 PCM Down
Conversion
¤1
Select whether to output
audio on DVD recorded in
96 kHz linear PCM as it is
(No) or to convert it to
48 kHz for output (Yes).
2 Dolby Digital
To select the signal format
(Bitstream or PCM) to be
output from the optical
digital audio output
terminal during playback of
DVDs recorded in Dolby
Digital.
3 DTS Digital Surround
To select whether DTS
Digital Surround bitstream
is output from the optical
digital audio output
terminal or no digital audio
is output during playback
of DVDs recorded in DTS
Digital Surround.
1 No (Factory preset)
When playing a DVD recorded in 96 kHz linear PCM, signal
of 96 kHz/24 bit sampling frequency will be output and you
can enjoy high quality sound. If the DVD is copyright-
protected, no digital signal will be output unless converted to
48 kHz.
³Signal of 48 kHz linear PCM can be output from digital
audio output terminal irrespective of the setting.
2 Yes
When playing a DVD recorded in 96 kHz linear PCM, signal
is converted to 48 kHz/16 bit and can be output from digital
audio output terminal even if the DVD is copyright-protected.
1 Bitstream
¤2 (Factory preset)
Dolby Digital bitstream (1ch5.1ch) is output during playback
of DVDs recorded in Dolby Digital.
2 PCM
Digital audio converted to 48 kHz/16 bit PCM (2ch) is output
during playback of DVDs recorded in Dolby Digital.
1 Off (Factory preset)
No digital audio is output during playback of DVDs recorded
in DTS Digital Surround.
2 Bitstream
¤2
DTS Digital Surround bitstream (1ch5.1ch) is output during
playback of DVDs recorded in DTS Digital Surround.
Digital Audio Output
1
PCM Down Conversion
2
Dolby Digital
3
DTS Digital Surround
No
Bitstream
Off
Press RETURN to exit
33
Advanced Operations
Recommended setting of “Digital Audio Output”
Adjust settings as shown in table below depending on the kind of equipment that is connected to the optical digital audio output terminal.
3 DTS Digital Surround
Off
Off
Bitstream
Bitstream
Off¤2
Type of equipment connected
No digital equipment is connected
Dolby Digital decoder (á page 9)
DTS Digital Surround decoder
(á page 9)
Dolby Digital/DTS Digital Surround
decoder (á page 9)
Digital audio equipment (no decoder)
(á page 11)
1 PCM Down Conversion
¤1
No
Yes
Yes
Yes
Yes
Recommended setting
2 Dolby Digital
Bitstream
Bitstream
PCM
Bitstream
PCM¤2
³Underlined items are factory preset.
¤1 Select “No” if the digital audio input terminal of your audio equipment (AV amplifier, etc.) can handle 96 kHz/24 bit signal. If it is not acceptable
for 96 kHz/24 bit digital audio signal, or the 96 kHz linear PCM disc you want to play is copyright-protected, it is recommended to set “1 No” and
make analog connection to enjoy high quality sound (If it is set to “Yes”, the player converts linear PCM to 48 kHz even during analog output).
¤2 When connecting an amplifier (with an optical digital input terminal) which does not contain a Dolby Digital or DTS Digital Surround decoder, be
sure to select “PCM” at “2 Dolby Digital” and “Off” at “3 DTS Digital Surround”. If “Bitstream” is selected, any attempt to play DVDs (or CDs
encoded with DTS) may cause a high level of noise that can injure your ears and damage your speakers.
For your reference
³Dolby Digital is a digital sound compression technique developed by Dolby Laboratories.
Supporting 5.1-channel surround sound, as well as stereo (2-channel) sound, this technique enables a large quantity of sound data to be efficient-
ly recorded on a disc.
³DTS Digital Surround is a 5.1-channel surround sound system, which is widely used in movie theaters around the world. The separation between
channels is good and provides a very real surround effect.
³Linear PCM is an uncompressed digital audio signal. While a CD is recorded in 44.1 kHz/16 bit, a DVD is recorded in 48 kHz/16 bit up to 96 kHz/
24 bit. Therefore, the sound reproduced with these signals is potentially better than that found on CDs. This player reproduces linear PCM in two
channels.
³Bitstream is a compressed digital audio signal. This signal can be decoded into different channels to produce, for instance, 5.1-channel surround
sound.
³The digital audio output terminal (optical) converts electrical signals into optical signals and transfers them to an amplifier. These optical signals
are immune from electrical interference, and they also have minimal effect on other equipment.
³These changes to digital audio output must be made, otherwise bitstream signals the decoder cannot handle will be output. If these
signals are output, “noise” will be output which can cause harm to your ears and speakers.
Note
³You cannot use DTS Digital Surround decoders not suited to DVD.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. + 19921997
Dolby Laboratories. All rights reserved.
34
Advanced Operations
Changing initial settings
9 Other Settings
See page 28 for operation.
Other Settings
1 Still Mode
2 Audio during Search
3 TV Mode (4:3)
4 D. Range Compression
Automatic
5 Still Picture Display
On
Pan&Scan
Off
Off
6 Black Level Control
Lighter
Press RETURN to exit
Note
³Audio is heard at any speed when playing CDs, regardless of any settings at 2 Audio during Search.
³Audio is not heard at any speed when playing CDs encoded with DTS, regardless of any settings at
2 Audio during Search.
1 Still Mode
Select either Field still or
Frame still in the still
picture mode.
2 Audio during Search
To select whether audio is
heard or not during search
(forward direction) at the
initial search speed.
3 TV Mode (4:3)
To select whether wide-
screen material is played
in the pan and scan style
or in the letterbox style on
a conventional TV (4:3).
4 D.(Dynamic) Range
Compression
To compress the dynamic
range (the difference
between the loudest sound
and the softest sound),
making it easier to hear
dialogue even at low
volume. This function only
works with Dolby Digital
DVD.
5 Still Picture Display
To display the picture type
(DVD), I, P or B in the still
picture mode.
6 Black Level Control
To select the black level of
the picture, Lighter or
Darker.
1 Automatic (Factory preset)
2 Field
Select this setting when jittering occurs in the still picture
mode when 1 Automatic is selected.
3 Frame
Select if small text or fine patterns cannot be seen clearly in
the still picture mode when 1 Automatic is selected.
1 On (Factory preset)
2 Off
1 Pan & Scan (Factory preset)
Wide-screen video material will be played in the pan and
scan style (the picture is shown with either one or both sides
cut off) on a conventional television (4:3).
³Video material not formatted in the pan and scan style will
be played back in the letterbox style.
2 Letterbox
Wide-screen video material will be played in the letterbox
style (black bands appear at the top and bottom of the
screen) on a conventional television (4:3).
1 Off (Factory preset)
The dynamic range remains as it was recorded on the disc.
2On
Dynamic range is compressed by increasing soft sounds and
reducing loud sounds. Select when viewing discs at low
volume, such as late at night.
1 Off (Factory preset)
2On
1 Lighter (Factory preset)
Select when the player is connected to a TV through the
VIDEO OUT terminal or S VIDEO OUT terminal.
2 Darker
Select when the player is connected to a TV through the
COMPONENT VIDEO OUT (Y/PB/PR) terminals.
Still (P)
Example: P-picture
35
Advanced Operations
For your reference
³I/P/B
To efficiently store video on DVD, common elements among frames are used in common, and different elements are recorded with each individual
frame. The frame that contains the common elements is called an I-picture, a complete frame in itself. A P-picture is calculated from past I or
P-pictures. The frame that fills in the spaces between the I-and P-pictures is called the B-picture.
I-pictures have the best picture quality, so they should be used when making picture adjustments.
³Frame
Individual images in a video or on the television are called frames.
³Field
Half of the video information (video signal) in a frame is called a field. With conventional TV systems, a single frame (a single screen) consists of
two fields.
³Frame still
The two fields are displayed alternately on the TV screen, so the image may be blurry. However, the image quality is better than field images.
³Field still
Only one field (half of the video information) is displayed on the TV screen, so the apparent resolution is low. However, there is no blurring on the
screen.
How different kinds of software appear on your television
DVD software is recorded in a variety of picture formats, and how they appear on your TV depends on the software, the kind of TV you have, and the
picture mode your TV is set to.
³Letterbox refers to pictures where black bands appear at the top and bottom.
³Pan and scan refers to pictures where part of the picture is cut off so it fills the whole screen.
The names given to the television picture modes depends on the make of your television. There may also be slight differences in how the pictures
appear on the screen. Refer to your televisions operating instructions for details.
Wide-screen, pan and scan
Wide-screen, non-pan and
scan
Regular (4:3)
Regular (4:3) letterbox
16:9
zoom mode
Top and bottom cut off
Top and bottom cut off
Full screen
16:9
full mode
Full screen
Screen stretched
horizontally
Letterbox with screen
stretched horizontally
4:3
Edges cut off.
Letterbox
Full screen
Letterbox
16:9
auto mode
Full screen
Full screen with black
bands at right and left
Letterbox with
extremities of picture
stretched.
Television and
picture mode
Software format
36
For Your Reference
Troubleshooting Guide
Before requesting service for this player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or
a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, contact your authorized
YAMAHA dealer or service center for instructions.
Reference pages are shown as black circled numbers 6.
Common Problems
No power.
The player is automatically
switched to the standby mode.
Play fails to start even when
[1 PLAY] is pressed.
Play starts but then stops
immediately.
No picture.
No sound.
Distorted sound.
Picture is distorted during rapid
advance or rapid reverse.
No key operation (by the player
and/or the remote control) is
effective.
The picture shown on the
television is not normal.
(The sides of the picture are cut
off or black bands appear at the
top and bottom of the screen.)
No on-screen display.
On-Screen Menu Icons not
displayed or only partially
displayed on the TV screen.
The language for the players
menus and on-screen messages is
wrong.
No operations can be performed
with the remote control.
Insert the AC power supply cord securely into the household AC outlet. 9
To conserve power, the player is automatically switched to the standby mode after approx.
30 minutes elapsed in the stop mode (Auto power-off function). Turn the power back to ON.
Condensation has formed: wait about 1 to 2 hours for it to evaporate.
This player cannot play discs other than DVD, Video CD and CD. 6
DVDs with a region number other than 1 or ALL cannot be played. DVDs with multiple region
numbers including 1 can be played. 6
The disc may be dirty and may require cleaning. V
Ensure that the disc is installed with the label of the side to be played facing upwards. >
Ensure that the equipment is connected properly. < =
Ensure the televisions video input setting (e.g. VCR2) is correct.
Ensure that the equipment is connected properly. 8=
Ensure that the input settings for the television and stereo system are correct.
Turn V.S.S. off if it is on. E K
The picture will be somewhat distorted at times: this is normal.
Some operations may be prohibited by the disc.
Press [STANDBY/ON] to switch the player to the standby mode and then back to ON. Alternatively,
press [STANDBY/ON] to switch the player to the standby mode, disconnect the AC power supply
cord and then reconnect it. (The player may not be operating properly due to lightning, static
electricity or some other external factor.)
Go to the initial settings menu 6 TV Aspect and change the setting to suit your television. You may
also need to change the screen mode on the television itself. O S
The Off setting is selected for 1 On-Screen Messages in 4 On-Screen Messages:
select On. O
Change the position of the On-Screen Menu Icons using 2 Color and Position in 4 On-Screen
Messages of the initial settings. O
Go to the initial settings menu 3 Menu Language and change the language. O
To conserve power, the player is automatically switched to the standby mode after approx.
30 minutes have elapsed in the stop mode (Auto power-off function). Turn the power back to ON.
Check the batteries are installed with the correct polarities (i and j). 5
The batteries are depleted: replace them with new ones. 5
Point the remote control at the remote control sensor and operate. 5
Operate the remote control at a distance of not more than 23 feet (7 m) from the remote control
sensor. 5
Remove the obstacles between the remote control and remote control sensor. 5
37
For Your Reference
DVD
No subtitles.
Alternative soundtrack (or
subtitle) languages fail to be
selected.
Angle cannot be changed.
Soundtrack and/or subtitle
language is not the one selected
at the initial settings.
The discs menu is displayed in
French (example).
Sound does not come from a
speaker.
The password for rating level has
been forgotten.
Reset all the settings to Factory
Preset.
The vocals cannot be turned off.
A menu is shown after playing
each song on a Karaoke DVD.
Subtitles appear only with discs which contain them.
Subtitles are cleared from the TV monitor. Display the subtitles. D J
An alternative language is not selected with discs which do not contain more than one language.
In the case of some discs, the alternative language cannot be selected by operating the [AUDIO] or
[SUBTITLE]. Try selecting it from the discs menu if one is available. B
This function is dependent on software availability. Even if a disc has a number of angles recorded,
these angles may be recorded for specific scenes only (when ANGLE lights up on the players FL
display).
If the soundtrack and/or subtitle language does not exist on the disc, the language selected at the
initial settings will not be seen/heard.
The setup 3 Menus of 1 Disc Languages is set to French: select English.
Check the connections. 8=
If you have a subwoofer connected to this player, use the On-Screen Menu Icons with the remote
control to turn subwoofer output on. K
If you have connected this player to an AV amplifier (with built-in decoder) through the digital audio
output terminal, go to the initial settings menu 7 Digital Audio Output and change the settings to
Bitstream for 2 Dolby Digital or 3 DTS Digital Surround. P
Sound will only come from the two main speakers if V.S.S. is on.
Turn V.S.S. off. E K
While stopped, press and hold [:] and [;] on the player and then also press and hold [< OPEN/
CLOSE] on the player until Initialized disappears from the television (after about 3 seconds).
All initial settings will return to the default values.
You have selected an audio channel that includes a vocal channel. Read the discs jacket to choose
the correct channel. C
Most Karaoke DVDs are designed to do this. Some discs have an item in the menu that allows you
to play all the songs.
Video CD
Self-diagnosis display function
When an error or trouble is detected during operation, a message appears in the FL display.
When a message has appeared, check the details given below.
No menu play. This function works only for Video CDs with playback control. 6
³If the message fails to be cleared, even when remedial action is taken, ask a service technician to repair the player.
Message
CHECK THE DISC
Player status
Disc is dirty.
Trouble is likely to have occurred. The
number following H differs depending on
the status of the player.
Remedy
Wipe the disc clean.
Press [STANDBY/ON] to switch the player to the standby mode
and then back to ON. Alternatively, press [STANDBY/ON] to
switch the player to the standby mode, disconnect the AC power
supply cord, and then reconnect it.
H ¸ ¸
¸ ¸ stands
for a number.
38
For Your Reference
Disc handling
Choose discs with these marks:
However, do not use irregulary shaped discs, such as heart-shaped.
(Discs of the sort can damage the player.)
º How to hold a disc
Do not touch the recorded surface.
º If the surface is dirty
Wipe it with a damp cloth and then wipe dry.
º If the disc is brought from a cold to a warm envi-
ronment, moisture may form on the disc
Wipe with a soft, dry, lint-free cloth before using the disc.
º Handling precautions
³Do not write on the label side with a ball-point pen or other writing
instrument.
³Do not use record cleaning sprays, benzine, thinner, static electric-
ity prevention liquids or any other solvent.
³Do not attach labels or stickers to discs. (Do not use discs with ex-
posed adhesive from tape or left over peeled off stickers.)
³Do not use scratch-proof protectors or covers other than those
specified for use with this player.
º Do not place or store discs in the following
places
³Locations exposed to direct sunlight
³Humid or dusty locations
³Locations directly exposed to a heat vent or heating appliance
Maintenance
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-
and-water solution or a weak detergent solution.
³Never use alcohol, paint thinner or benzine to clean this unit.
³Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
39
For Your Reference
Specifications
Power supply:
U.S.A. and Canada models: AC 120 V, 60 Hz
U.K. and Europe models: AC 220240 V, 50 Hz
Australia model: AC 220240 V, 50 Hz
Asia model: AC 110240 V, 50/60 Hz
Power consumption: 14 W
Dimensions: 17
1
/8q (W)k10
7
/8q (D)k3
7
/8q (H)
[435 (W)k276 (D)k99 (H) mm]
Mass: 7 lbs. 4 oz (3.3 kC)
Signal system:
U.S.A. and Canada models: NTSC
U.K., Europe and
Australia models: PAL 625/50, PAL 525/60
General model: PAL/NTSC
Operating temperature range:
i41 to i95 oF (i5 to i35 oC)
Operating humidity range: 5 to 90 % RH (no condensation)
Discs played:
(1) DVD-Video disc
5q (12 cm) single-sided, single-layer
5q (12 cm) single-sided, dual-layer
5q (12 cm) double-sided, single-layer
3q (8 cm) single-sided, single-layer
3q (8 cm) single-sided, dual-layer
3q (8 cm) double-sided, single-layer
(2) Compact disc (CD-DA, Video CD)
5q (12 cm) disc
3q (8 cm) disc
Video output:
Output level: 1 Vp-p (75 )
Output terminal: Pin jack
Number of terminals: 1 system
S video output:
Y output level: 1 Vp-p (75 )
C output level: 0.286 Vp-p (75 )
Output terminal: S terminal
Number of terminals: 1 system
Component video output:
Asia and Australia models:
Y output level: 1 Vp-p (75 )
P
B output level: 0.7 Vp-p (75 )
P
R output level: 0.7 Vp-p (75 )
Output terminal: Pin jack
(Y: green, P
B: blue, PR: red)
Scart video terminal:
U.K. and Europe models:
Audio output:
Output level: 2 Vrms (1 kHz, 0 dB)
Output terminal: Pin jack
Mixed output (L/R): 1 system
Subwoofer output: 1 system
Audio signal output characteristics:
(1) Frequency response:
³DVD (linear audio): 2 Hz22 kHz (48 kHz sampling)
2 Hz44 kHz (96 kHz sampling)
³CD audio: 2 Hz20 kHz (EIAJ)
(2) S/N ratio:
³CD audio: 115 dB (EIAJ)
(3) Dynamic range:
³DVD (linear audio): 102 dB
³CD audio: 98 dB (EIAJ)
(4) Total harmonic distortion:
³CD audio: 0.0025 % (EIAJ)
Digital audio output:
Optical digital output: Optical terminal
Pickup: Wave length: 665 nm
Laser power: CLASS II
Laser output: Max. 1.0 mW (Continuous)
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Power consumption in standby mode:
approx. 2.0 W
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. PA PARIS-EST RUE AMBROISE CROIZAT CROISSY-BEAUBOURG BP70-77312 MARNE LAVALLEE, CEDEX 2 FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in Japan

Documenttranscriptie

U DVD/Video CD/CD Player DV-S5270 Operating Instructions Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. VQT8678-1 Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Accessories Getting Started Please check and identify the supplied accessories. ¸ Remote control . . . . . . . . . . . . . . 1 ¸ Batteries . . . . . . . . . . . . . . . . . . . . 2 for remote control ¸ AC power supply cord . . . . . . . . 1 ¸ Audio/video cable . . . . . . . . . . . . 1 Note ³The included AC power supply cord is for use with this unit only. Do not use it with other equipment. User memo: DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER! SERIAL NUMBER Table of contents Getting Started Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02 SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03 Remote control preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07 Home theater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 Connecting an AV amplifier with a built-in decoder . . . . . . . . . . 09 Connecting audio equipment with 2-channel analog audio input terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connecting audio equipment with digital audio input terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Connection to a television . . . . . . . . . . . . . . . . . . . . . . . . . . . . 012 Basic Operations Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stopping play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Other methods of play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Still picture (Pause) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Skipping chapters or tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frame advance (Frame reverse) . . . . . . . . . . . . . . . . . . . . . . . Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rapid advance (Rapid reverse) . . . . . . . . . . . . . . . . . . . . . . . . Canceling playback control . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using menus to play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 15 16 16 16 16 17 17 18 18 Advanced Operations Advanced operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing soundtrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . . Viewing from another angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reproducing an Advanced Virtual Surround Sound (V.S.S.) effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repeating sections between two specific points (A-B repeat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using On-Screen Menu Icons . . . . . . . . . . . . . . . . . . . . . . . . . . Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Detailed descriptions of each icon . . . . . . . . . . . . . . . . . . . . . . Changing initial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Disc Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 On-Screen Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FL Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Digital Audio Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Other Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How different kinds of software appear on your television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 19 20 20 21 22 22 23 24 25 25 26 28 28 29 30 31 31 31 31 32 34 35 For Your Reference Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 36 38 38 39 SAFETY INFORMATION Note Use this player only in areas with the same power supply. Units for the U.S.A. and Canada: AC 120 V, 60 Hz. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/VIDEO CD/CD PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD/VIDEO CD/CD PLAYER CORRECTLY AS INSTRUCTED. WHEN THIS DVD/VIDEO CD/CD PLAYER IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS PLAYER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PLAYER TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Getting Started CAUTION: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION -LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM. ATTENTION-RAYONNEMENT LASER EN CAS D'OUVERTURE. NE PAS REGARDER DANS LE FAISCEAU. VORSICHT -LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET. NICHT IN DEN STRAHL BLICKEN. ADVARSEL -LASERSTRÅLING VED ÅBNING. SE IKKE IND I STRÅLEN. ADVARSEL -LASERSTRÅLING NÅR DEKSEL ÅPNES. STIRR IKKE INN I STRÅLEN. VARNING -LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. STIRRA EJ IN I STRÅLEN. VARO! -AVATTAESSA OLET ALTTIINA LASERSÄTEILYLLE. ÄLÄ TUIJOTA SÄTEESEEN. 注意 - ここを開くとレーザー光が出ます。 レーザー光をのぞき込まないでください。 This player is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this player itself is turned off. This state is called the standby mode. In this state, this player is designed to consume a very small quantity of power. (Inside of player) FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003. 3 SAFETY INFORMATION Getting Started FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. 4 We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion—and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. Remote control preparations A A » Battery installation R6/LR6, AA, UM-3 ³Align the poles (i and j) properly when inserting the batteries. ³Do not mix old and new batteries or different types of batteries. ³Do not recharge ordinary dry cell batteries. ³Do not heat or disassemble the batteries. Do not allow them to contact flame or water. ³Remove the batteries if the unit is not to be used for a long time. ³Do not keep together with metallic objects such as necklaces. ³Do not use rechargeable type batteries. ³Do not use batteries if the covering has been peeled off. B Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body. Remote control signal sensor B » 30° Transmission window 30° About 23 feet (7 meters) in front of the signal sensor Getting Started Use of batteries Correct method of use Operation notes ³Do not place obstacles between the remote control signal sensor and remote control unit. ³Do not expose the remote control signal sensor to direct sunlight or to the bright light of a fluorescent light. ³Take care to keep the remote control signal sensor and end of the remote control unit free from dust. ³If this system is installed in a rack with glass doors, the glass doors’ thickness or color might make it necessary to use the remote control a shorter distance from the system. To prevent damage ³Never place heavy items on top of the unit. ³Do not disassemble or reconstruct the unit. ³Do not spill water or other liquids into the unit. 5 Disc information Discs not supported by this player Getting Started Discs supported by this player DVD-Video 3q (8 cm) disc/ 5q (12 cm) disc Video CD 3q (8 cm) disc/ 5q (12 cm) disc Audio CD 3q (8 cm) disc/ 5q (12 cm) disc ³Do not try to play Photo CD or CD-R. (Data on the disc may be damaged.) ³DVD with region number other than “1” or “ALL” ³PAL discs ³CD-G ³Divx Video Disc ³DVD-ROM ³CD-RW ³DVD-Audio ³DVD-R ³DVD-RAM ³DVDiRW ³DVD-RW ³CD-ROM ³CVD ³SVCD ³SACD ³VSD ³CDV etc. For the purpose of these operating instructions, “DVD” stands for DVD-Video and “CD” stands for Audio CD. º Region number supported by this player Region numbers are allocated to DVD players and software according to where they are sold. ³The region number of this player is “1”. ³The player will play DVDs marked with labels containing the region number “1” or “ALL”. º Terms used in these operating instructions ³Title/Chapter [DVD] DVDs are divided up into large sections, titles, and smaller sections, chapters. The numbers allocated to these sections are called title numbers and chapter numbers. Example: Example: 1 ALL 1 3 Title 1 Title 2 Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2 4 etc. º Playing DVDs and Video CDs The producer of the material can control how these discs are played. This means that you may not be able to control play of a disc with some operations described in these operating instructions. Read the disc’s instructions carefully. Example: ³“/” appears when you press the skip buttons to move to the next section. ³Resume, repeat play, and markers may not work during play of interactive DVDs and menu play of Video CDs with playback control. ³After showing the Karaoke menu, tracks are played successively without returning to the menu (Video CD with playback control). º Marks used in these operating instructions [DVD]: indicates features applicable to DVD only. [VCD]: Video CD only. [CD] : CD only. ³Track [VCD] [CD] Video CDs and CDs are divided up into sections called tracks, and the numbers allocated to these sections are called track numbers. Example: Track 1 Track 2 Track 3 Track 4 Track 5 ³Playback control [VCD] If a Video CD has “playback control” written on its disc or jacket, it means that particular scenes or information can be selected for viewing interactively with the TV monitor using the menu screen. This player can play Video CDs with playback control. Using menus to control play of a Video CD is called “menu play” in these operating instructions. Display during menu play of a Video CD with playback control ³Interactive DVD [DVD] An interactive DVD is DVD software which includes multiple angles, multiple plot endings, etc. The elapsed play time of some of these DVDs is not shown. Display during play of an interactive DVD DVD 6 Control reference guide 1 2 3 4 5 6 POWER f OPEN/CLOSE STANDBY/ON 6 DVD / VIDEO CD / CD : DIGITAL ; C V.S.S. 7 ; < => 9 8 ? ANGLE PROG. ABC SKIP : @ 96kHz 24bit D EF SEARCH D 5 9 G H I J K L M N O OPEN/CLOSE H/ I STOP PAUSE PLAY ∫ ; 1 SLOW/ SEARCH SKIP : 9 6 TOP MENU 5 MENU ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE REPEAT 1 2 3 4 5 6 7 8 9 0 S10 3 4 P Q R S T Getting Started 1 NATURAL SOUND DVD PLAYER DVD Buttons such as  function in exactly the same way as the buttons on the player. A-B V.S.S. U SET UP CANCEL V Player Page 1 Standby/On button (STANDBY/ON) . . . . . . . . . . . . . . . . . . 14 Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 2 Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3 Disc tray open/close button (<OPEN/CLOSE) . . . . . . . . . 14 4 Play button (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5 Pause button (;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6 Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 7 FL display 8 Virtual Surround Sound indicator (V.S.S.) . . . . . . . . . . . . . 21 9 Skip button (: SKIP 9) . . . . . . . . . . . . . . . . . . . . . . . . 16 : Search button (6 SEARCH 5) . . . . . . . . . . . . . . . . . . . 17 ; Rotates during play. Rotates fast clockwise or counterclockwise during rapid advance (reverse). Rotates slowly clockwise or counterclockwise during slow-motion play. [DVD] [VCD] Illuminates in the stop mode. < Illuminates during playback. Flashes when the RESUME function is ON. = Illuminates during repeat play. > Illuminates in the still picture (pause) mode. ? Elapsed playing time from the start of the title/track during play @ Audio channel information recorded in the disc being played back (e.g. 2ch or 5.1ch) Center Rear (left) Main (left) Rear (right) Subwoofer Main (right) A B C D A DVD is loaded. It is possible to change the angle. [DVD] Illuminates during program play. [VCD] [CD] Title/chapter number [DVD] Track number [VCD] [CD] E Linear PCM of 96 kHz sampling is being played. F Linear PCM of 24 bit is being played. Remote control Page G H I J K L M N O P Q R S T U Top menu button (TOP MENU) . . . . . . . . . . . . . . . . . . . . . . 14 Cursor buttons (3, 4, 2, 1)/Enter button (ENTER) . . . . 14 On screen button (ON SCREEN) . . . . . . . . . . . . . . . . . . . . . 25 Play mode button (PLAY MODE) . . . . . . . . . . . . . . . . . . . . . 23 Subtitle button (SUBTITLE) . . . . . . . . . . . . . . . . . . . . . . . . . 20 Repeat button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 A-B repeat button (A-B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Virtual Surround Sound button (V.S.S.) . . . . . . . . . . . . . . . 21 Setup button (SET UP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Slow/Search buttons (6, 5 SLOW/SEARCH) . . . . . . . 17 Menu button (MENU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Return button (RETURN) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Angle button (ANGLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Numeric buttons (1–9, 0, S10) . . . . . . . . . . . . . . . . . . . . . . . 14 ³To select a 2-digit number Example: To select track 23 Press [S10], then [2] and [3]. V Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 7 Home theater º Settings for your Home Theater Set up System Speakers Settings in “7 Digital Audio Output” Page AV amplifier with digital input and built-in Dolby Digital/DTS decoder ³Main L/R ³Center¤2 ³Rear L/R¤2 ³Subwoofer¤2 1. PCM down Conversion⇒“Yes” 2. Dolby Digital⇒“Bitstream” 3. DTS⇒“Bitstream” AV amplifier with digital input and built-in Dolby Digital decoder (without DTS decoder) ³Main L/R ³Center¤2 ³Rear L/R¤2 ³Subwoofer¤2 1. PCM down Conversion⇒“Yes” 2. Dolby Digital⇒“Bitstream” 3. DTS⇒“Off” To enjoy Dolby surround sound¤1 AV amplifier with built-in Dolby Pro Logic decoder ³Main L/R ³Center ³Rear L/R 1. PCM down Conversion⇒“Yes” 2. Dolby Digital⇒“PCM” 3. DTS⇒“Off” 10 To enjoy linear PCM sound Stereo amplifier with digital input and built-in high sampling DA converter rated at 96 kHz Main L/R 1. PCM down Conversion⇒“No” 2. Dolby Digital⇒“PCM” 3. DTS⇒“Off” 11 Stereo amplifier with digital input and built-in conventional DA converter Main L/R 1. PCM down Conversion⇒“Yes” 2. Dolby Digital⇒“PCM” 3. DTS⇒“Off” 11 To enjoy 5.1 channel surround sound Getting Started Equipment to be connected 9 9 ¤1 If you have connected an AV amplifier with built-in Dolby Pro Logic decoder, you may need to connect center and rear speakers. ¤2 Connect speakers if necessary and make the speaker settings on the amplifier. º Upgrading your television ³You can connect CRT projectors, LCD projectors, and projection televisions. ³See “Connection to a television” (á pages 12 and 13) for details on connection. Note ³The equipment connections described are examples. ³Peripheral equipment and optional cables sold separately unless otherwise indicated. º Before connections ³Ensure that this player and other equipment to be connected are switched to the standby mode or off and disconnect the AC power supply cord before commencing connection. ³Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely. ³Read through the instructions before connecting other equipment. ³Ensure that you observe the color coding when connecting audio and video cables. Note ³TV volume may be lower when playing DVDs than during television broadcasts. Turn the volume up while playing DVDs and reduce it to the previous level before switching the source back to television to avoid sudden changes in volume. ³When you have finished connection, select the appropriate screen type at the initial setting “6 TV Aspect” according to your television (4:3/16:9) (á page 31). No changes are needed if you connect the player to a conventional television (4:3). Conserving power ³The unit consumes approx. 2.0 W even when it is turned off with [STANDBY/ON]. To save power when the unit is not to be used for a long time, unplug it from the household AC outlet. 8 Connecting an AV amplifier with a built-in decoder You can enjoy the 5.1-channel surround sound found on DVD recorded with Dolby Digital or DTS Digital Surround by connecting an AV amplifier with a built-in decoder or a separate decoder-amplifier combination. To household AC outlet Align the plug with the terminal Dust protection cap AC power supply cord (included) ³Remove the dust protection cap from the optical digital audio output terminal and connect the cable firmly so that the configurations of both the cable and the terminal match. ³Keep the dust protection cap and reattach when not using the terminal. Getting Started AC 120 V, 60 Hz Note when connecting the optical fiber cable Back of the player AUDIO OUT PCM/Î DIGITAL DTS VIDEO OUT COMPONENT VIDEO AC IN PR L VIDEO S VIDEO OPTICAL SUBWOOFER R PB Y Optical fiber cable ³Do not bend the optical fiber cable when connecting it. AV amplifier with a built-in decoder ³Read the instructions for the amplifier and speakers for connection details. OPTICAL Speaker You can connect from 3 to 5 speakers including the main two. ³Main speaker (L/R) ³Center speaker ³Rear speaker (L/R) ³Subwoofer When you have finished connection Adjust each item of “7 Digital Audio Output” to suit your decoder (á page 33). 9 Home theater Connecting audio equipment with 2-channel analog audio input terminals You can enjoy stereo sound if you connect an amplifier, system component or TV that has 2-channel analog audio input terminals. By connecting a subwoofer, you can also enjoy powerful bass. Getting Started º Connecting the amplifier, system component or TV Amplifier and speakers or system component ³Read the instructions for the amplifier and speakers or system component for connection details. Television AUDIO IN L AUX IN or SUB WOOFER AV amplifier with built-in Dolby Pro Logic decoder ³If you connect an AV amplifier with built-in Dolby Pro Logic decoder, you will also need to connect center and rear speakers to enjoy surround sound. Read the instructions for the equipment for connection details. ³Turn off V.S.S. (á page 21) and subwoofer output (á item C on page 27). Dolby Pro Logic will not function correctly if they are on. L R R Audio cable INPUT Active subwoofer ³Place the subwoofer as close as possible to the front center. Audio cable Back of the player AUDIO OUT PCM/Î DIGITAL DTS VIDEO OUT COMPONENT VIDEO PR L VIDEO S VIDEO OPTICAL SUBWOOFER º If connecting audio equipment which has no subwoofer output terminal R PB Audio cable INPUT When you have finished connection Adjust each item of “7 Digital Audio Output” (á page 33). 10 Y Active subwoofer ³Use the On-Screen Menu Icons to turn subwoofer output on (á item C on page 27). ³Adjust the volume of the subwoofer to suit your preference. Connecting audio equipment with digital audio input terminals Note when connecting the optical fiber cable AUDIO OUT PCM/Î DIGITAL DTS VIDEO OUT Dust protection cap Align the plug with the terminal L VIDEO S VIDEO OPTICAL SUBWOOFER R ³Remove the dust protection cap from the optical digital audio output terminal and connect the cable firmly so that the configurations of both the cable and the terminal match. ³Keep the dust protection cap and reattach when not using the terminal. Getting Started Back of the player Optical fiber cable ³Do not bend the optical fiber cable when connecting it. OPTICAL System component or amplifier with digital audio input terminals and speakers ³Read the instructions for the amplifier and speakers or system component for connection details. When you have finished connection Adjust each item of “7 Digital Audio Output” (á page 33). 11 Connection to a television Getting Started Connect Your Player Directly To Your Television. If the player is connected to the television through a video cassette recorder, the picture may not be played back correctly due to the copy guard. So we strongly recommend you do not connect the player to your video cassette recorder when setting up your home entertainment system. ³Connect to the television section if you connect the player to a combined television-video player. Do not place the player on amplifiers or other equipment which may become hot. The heat can damage the player. Connecting to a television with video input terminal AUDIO IN VIDEO IN L R Television Audio/video cable (included) AUDIO OUT PCM/Î DIGITAL DTS VIDEO OUT L VIDEO S VIDEO OPTICAL SUBWOOFER R Back of the player Connecting to a television with S video input terminal AUDIO IN S VIDEO IN L R Television Audio/video cable (included) S video cable AUDIO OUT PCM/Î DIGITAL DTS VIDEO OUT L VIDEO OPTICAL SUBWOOFER 12 Back of the player R S VIDEO S video output terminal The S (separate) video output terminal achieves a clearer picture than the video output terminal by separating the color (C) and luminance (Y) signals before transmitting them to the television. (Actual results depend on the television.) Connecting to a television with component video input terminals AUDIO IN COMPONENT VIDEO IN L Getting Started Y PB PR R Television Audio/video cable (included) Video cable AUDIO OUT PCM/Î DIGITAL DTS VIDEO OUT COMPONENT VIDEO PR L VIDEO S VIDEO OPTICAL SUBWOOFER R PB Y Component video output terminals (Y/PB/PR) The component video output terminals output the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors. ³The description of the component video input terminals depends on the television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR and so on). Connect to terminals of the same color. Back of the player 13 Basic play 1 3 24 º Before enjoying DVD/Video CD/CD The menu language for this player has been set to English, but you can change the language to French or Spanish (á “3 Menu Language”, page 31). English has been used in the examples shown. NATURAL SOUND DVD PLAYER f OPEN/CLOSE STANDBY/ON DVD / VIDEO CD / CD : DIGITAL SKIP ; C SEARCH D V.S.S. : SKIP ; POWER 1 OPEN/CLOSE H/ I STOP PAUSE PLAY ∫ ; 1 SLOW/ SEARCH SKIP :, 9SKIP : 9 6 TOP MENU 5 Basic Operations MENU 1 Press [STANDBY/ON] to switch on the power. RETURN 2 Press [< OPEN/CLOSE] to open the disc tray. 3 Place the disc on the disc tray. 4 Press [1]. MENU TOP MENU Cursor buttons/ ENTER 2 4 Preparations ³Ensure connections to your television and audio equipment are correct. ³Turn on your television and other equipment. ³Switch the video input mode on the television to suit the type of connection you have made (e.g., VCR 2). ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE REPEAT 1 2 3 4 5 6 7 8 9 0 S10 A-B V.S.S. Numeric buttons SET UP CANCEL 1 ³Insert inside the guides. ³Do not load more than one disc. The disc tray is automatically closed and play begins. STANDBY/ON A » 2 Open f OPEN/CLOSE When a menu screen appears on the TV monitor Press the cursor buttons [3, 4, 2, 1] and press [ENTER], or press the numeric buttons, to select the item. Play of the selected item now begins. ³The cursor buttons are not effective for selecting items for Video CDs. 3 Label must face upward. (With double-sided discs, load so the label for the side you want to play is facing up.) 5q (12 cm) disc 3q (8 cm) disc 4 Close A ENTER 14 1 2 3 4 5 6 7 8 9 0 S10 Reading º Other buttons used to operate menus Read the disc’s instructions for further details about operation. [9 SKIP]: Shows the next menu. [: SKIP]: Shows the previous menu. [RETURN]: Shows the menu screen. [TOP MENU]: Shows the first menu screen. [DVD] [MENU]: Shows the menu screen. [DVD] Note ³“NO PLAY” is displayed on the FL display if you load the following kinds of discs and they cannot be played: ³DVD for which playback is prohibited by the initial settings “2 Ratings” (á page 30). ³DVD with a region number other than “1” or “ALL” (á page 6). ³If the disc is put in upside down (and it is a single sided disc). ³When “” appears on the TV monitor when a button is pressed, the operation is prohibited by the player or disc. STANDBY/ON 1 A » NATURAL SOUND DVD PLAYER f OPEN/CLOSE STANDBY/ON DVD / VIDEO CD / CD : DIGITAL Basic play ∫ SKIP ; C SEARCH D V.S.S. Stopping play Press [º] during play. ³The player records the point where [º] was pressed during play. (“!” flashes on the player’s FL display.) B » OPEN/CLOSE H/ I STOP PAUSE ∫ PLAY ; 1PLAY 1 SLOW/ SEARCH SKIP : 9 6 Press [1] while “!” is flashing on the FL display. Play will resume from the point where [º] was pressed. 5 TOP MENU To resume play from where you stopped it (RESUME function) MENU To clear the RESUME function Press [º] again or open the disc tray while “!” is flashing on the FL display. A Note ³The RESUME function works only with titles for which the elapsed playing time appears on the player’s FL display during playback. ³This feature remains active if the player is switched to the standby mode and then turned back ON. B C » Basic Operations POWER POWERH/ I ∫STOP Chapter preview function [DVD] C 1·2 NATURAL SOUND DVD PLAYER f OPEN/CLOSE STANDBY/ON DVD / VIDEO CD / CD : DIGITAL SKIP ; C SEARCH D V.S.S. POWER OPEN/CLOSE H/ I STOP PAUSE ∫ PLAY ; SKIP : TOP MENU 9 1 SLOW/ SEARCH 6 1·2 5 This function plays the first few seconds of each chapter from the beginning of the title up to the point where operation was stopped. This makes it possible to review previous chapters. 1. Press [1] while “!” is flashing on the FL display. (The message illustrated is briefly displayed.) 2. Press [1] again while the message is displayed on the screen. Normal playback will commence from the point where operation was stopped. Note ³Canceling the RESUME function will also clear the chapter preview function. ³The chapter preview function may not work with some DVDs. º After operation MENU When the player is not in use, remove the disc and press [STANDBY/ON] to switch the player to the standby mode. The player is automatically switched to the standby mode after 30 minutes or so have elapsed in the stop mode. (Auto power-off function) 1 Press PLAY to Chapter Preview Note ³The disc continues to rotate while the menu is displayed even after the player has finished playing a particular item. Stop the player when you finish viewing to preserve the player’s motor and prevent screen burn. 2 15 Other methods of play 1; Features on the next few pages are accessed mainly by using the remote control. NATURAL SOUND DVD PLAYER f OPEN/CLOSE STANDBY/ON DVD / VIDEO CD / CD : DIGITAL SKIP ; C SEARCH D V.S.S. : SKIP ; A » Still picture (Pause) Press [; PAUSE] during play. POWER OPEN/CLOSE H/ I STOP ; PAUSE PAUSE ∫ PLAY ; 1 SLOW/ SEARCH SKIP :, 9SKIP : 9 6 TOP MENU To return to normal play Press [1 PLAY]. MENU Cursor buttons B » ENTER Basic Operations 1PLAY 5 ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE Skipping chapters or tracks Press [:, 9 SKIP] or [: SKIP 9], during play or while paused. REPEAT 1 2 3 4 5 6 7 8 9 0 S10 Play position A-B twice once once twice V.S.S. Chapter/track Chapter/track Chapter/track SET UP CANCEL [:] [9] For your reference ³When [:, 9 SKIP] or [: SKIP 9] on the player is pressed during menu play of Video CDs with playback control, a menu screen may sometimes be recalled. A C » PAUSE [DVD] [VCD] Press the cursor buttons [2, 1] while paused. ; ³The disc is advanced (reversed) by one frame each time the cursor buttons [2, 1] are pressed. ³When the cursor buttons [2, 1] are kept pressed, consecutive frame advance (reverse) works. B SKIP : Reverse 9 Forward To return to normal play Press [1 PLAY]. For your reference ³Pressing [; PAUSE] also activates frame advance. ³Whether the pictures are advanced by a “Frame” or “Field” is automatic, but you can change the initial settings to choose how the picture is advanced (á page 34). C Reverse (DVD only) 16 Frame advance (Frame reverse) Forward Other methods of play 1 A » NATURAL SOUND DVD PLAYER f OPEN/CLOSE STANDBY/ON Slow-motion play DVD / VIDEO CD / CD : DIGITAL SKIP ; C SEARCH D V.S.S. C SEARCH D POWER PAUSE ∫ ; PLAY 1 SLOW/ SEARCH SKIP 9 6 TOP MENU 5 1PLAY 6, 5 SLOW/SEARCH ³There are five speeds of slow-motion. MENU To return to normal play Press [1 PLAY]. ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE REPEAT 1 2 3 4 5 6 7 8 9 0 S10 A-B For your reference ³When [6, 5 SLOW/SEARCH] or [6 SEARCH 5] on the player is pressed during menu play of Video CDs with playback control, a menu screen may sometimes be recalled. V.S.S. SET UP CANCEL B » Rapid advance (Rapid reverse) Press [6, 5 SLOW/SEARCH] [6 SEARCH 5] during play. A or Basic Operations : Press [6, 5 SLOW/SEARCH] or [6 SEARCH 5] while paused (á page 16). ³Each press increases the speed of slow-motion. OPEN/CLOSE H/ I STOP [DVD] [VCD] ³Each press increases the speed of the search. SLOW/ SEARCH 6 5 Reverse Forward (DVD only) B SLOW/ SEARCH 6 Reverse ³There are five speeds of advance (reverse). To return to normal play Press [1 PLAY]. For your reference ³When [6, 5 SLOW/SEARCH] or [6 SEARCH 5] on the player is pressed during menu play of Video CDs with playback control, a menu screen may sometimes be recalled. ³For DVDs and Video CDs, audio will be heard during searching (forward direction only) at the initial search speed. (To turn audio off, á “2 Audio during Search”, on page 34.) 5 Forward 17 Other methods of play POWER OPEN/CLOSE A » H/ I 1 STOP PAUSE ∫ ; 1 TOP MENU PLAY 1 SLOW/ SEARCH SKIP : 9 6 [VCD] 5 MENU ENTER 1 2 1 2 REPEAT 2 3 4 5 6 7 8 9 0 S10 A-B 2 Basic Operations Press the numeric buttons to select a track (á item 7 on page 7 for number entry). Play begins. ³Refer to the jacket etc. of the disc concerned for the track numbers. ³Press [1] to start play from the beginning of the disc. V.S.S. SET UP CANCEL To return to menu play Press [º STOP] to stop play, press [MENU], and press the numeric buttons to select an item. “PBC” lights on the player’s FL display. A 1 2 B 1 B » STOP Using menus to play [DVD] By calling up menus during play, you can start play from a specific title or chapter, or change the soundtrack and subtitle languages. ∫  1 2 3 4 5 6 7 8 9 0 S10 Press [TOP MENU] or [MENU] during play to display the menu. ³Press again to return to what you were watching. Press the cursor buttons [3, 4, 2, 1] to select an item and press [ENTER]. The selected item is confirmed. ³Repeat if other menus are shown. TOP MENU MENU DVDs can have several menus. The menu displayed when you press [TOP MENU] may be different to the menu displayed when you press [MENU]. [C] 2 For your reference ³Menu content depends on the disc. These operating instructions describe the basic steps. ³Both buttons take you to the same menu if the disc has only one menu. ENTER C Example: if you press the buttons while you are playing title 2 Title 1 The disc’s top Menu menu Title 2 Menu MENU TOP MENU 18 Press [º STOP] after the menu screen appears (after step 4 on page 14). “PBC” will be cleared from the player’s FL display. ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE 1 Canceling playback control Title 3 Menu TOP MENU Cursor buttons/ ENTER Advanced operations MENU A » ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE [DVD] AUDIO Some DVDs have more than one soundtrack recorded on them, and you can change soundtrack during play. REPEAT 1 2 4 5 6 7 8 9 0 S10 Changing soundtrack 3 A-B Numeric buttons V.S.S. SET UP CANCEL Press [AUDIO] during play to display the current soundtrack. The number changes each time you press the button. ³You can also use the cursor buttons [3, 4], or the numeric buttons to change the soundtrack. AUDIO To clear the display Press [ENTER]. Î Digital 1 ENG 3/2.1ch Soundtrack being played back (“–” indicates a soundtrack is not recorded.) Hello Î Digital 2 FRA 3/2.1ch For your reference ³You can only select languages or sound formats if they have been recorded on the disc you are playing. ³If resume (á page 15) is canceled or if you stop play of an interactive DVD, the soundtrack revert to the initial settings. (á page 29) ³Some discs allow changes to soundtrack only by using the disc’s menus. B » Bonjour Switching vocals ON or OFF for Karaoke discs [DVD] [VCD] 1. Press [AUDIO] during play. 2. Press the cursor buttons [3, 4, 2, 1] or press [AUDIO] to change the setting. B TOP MENU MENU 2·ENTER ENTER 1 ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE 2 3 AB 1 ³Duet –– –: 1r2: V1: V2: Vocal OFF Vocal 1, 2 ON Vocal 1 only ON Vocal 2 only ON ³Choose “– – –” for Karaoke. ³Choose “V1” or “V2” to duet with the player. REPEAT 1 DVD Karaoke [2, 1] ³Solo –– –: Vocal OFF ON: Vocal ON Advanced Operations A Video CD ([3, 4] or [AUDIO]) LR: Vocals (Vocals seem to come from the right) L: No Vocals R: Vocals (Vocals seem to come from both left and right) ³Choose “L” for Karaoke. AUDIO To clear the display Press [ENTER]. 2 DVD 1 U Vocal ON For your reference ³Karaoke discs may show a menu after each track. Some will have a menu that allows you to play all the tracks. ³Some discs require different operations to those described. Read the disc’s instructions for details. Video CD AUDIO L R 19 A TOP MENU Cursor buttons/ ENTER Advanced operations MENU A » ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE SUBTITLE 2 3 4 5 6 7 8 9 0 S10 A-B V.S.S. [DVD] Some DVDs have more than one subtitle language recorded on them, and you can change subtitle language during play. REPEAT 1 Changing subtitle language Numeric buttons SET UP CANCEL Press [SUBTITLE] during play to display the current language number. The number changes each time you press the button. ³You can also use the cursor buttons [3, 4] or the numeric buttons to change the language number. SUBTITLE Subtitle language number being played back (“– –” indicates subtitles are not recorded) ON 1 ENG ON 2 FRA To clear the display Press [ENTER]. B » To clear/display the subtitles Advanced Operations 1. Press [SUBTITLE]. 2. Press the cursor buttons [2, 1] to select “ON” or “OFF”. I love you B Je t’aime TOP MENU MENU 2 1 ENTER For your reference ³You can only select languages if they have been recorded on the disc you are playing. ³If resume (á page 15) is canceled or if you stop play of an interactive DVD, the subtitle languages revert to the initial settings (á page 29). ³Some discs allow changes to subtitle languages only by using the disc’s menus. ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE REPEAT 1 2 3 AB 1 Note ³In some cases, the subtitle language is not changed to the selected one immediately. ³When a disc supporting closed captions is played, the subtitles and closed captions may overlap each other on the TV monitor. In this case, turn the subtitles off. SUBTITLE C » 2 Viewing from another angle [DVD] Some DVDs allow you to view the same scene from different angles. “ANGLE” lights on the FL display to indicate that the feature is available. C TOP MENU Cursor buttons/ ENTER Press [ANGLE] during play to display the current angle number. MENU The number changes each time you press the button. ³You can also use the cursor buttons [3, 4] or the numeric buttons to change the angle. ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE ANGLE REPEAT 1 2 3 4 5 6 7 8 9 0 S10 A-B V.S.S. Numeric buttons SET UP CANCEL For your reference ³You can only select angles if they have been recorded on the disc you are playing. ³Some discs allow you to set angles before multi-angle scenes are played. ³Some discs allow changes to angles only by using the disc’s menus. ANGLE Angle number being played back 1 20 To clear the display Press [ENTER]. 3 Advanced operations V.S.S. indicator A » NATURAL SOUND DVD PLAYER f OPEN/CLOSE STANDBY/ON DVD / VIDEO CD / CD : DIGITAL SKIP ; C SEARCH D Reproducing an Advanced Virtual Surround Sound (V.S.S.) effect V.S.S. [DVD] (Dolby Digital, 2-channel or over only) Use this feature to enjoy a surround-like effect if you are using two main speakers. ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE REPEAT 1 2 3 4 5 6 7 8 9 0 S10 Press [V.S.S.] during play. A-B Each time this button is pressed, the player’s FL display changes: a V.S.S. 1 (Natural effect) b V.S.S. 2 (Emphasized effect) c V.S.S. is canceled V.S.S. V.S.S. SET UP CANCEL ³The V.S.S. indicator lights up green when the V.S.S. function is activated. V.S.S. a b c Note ³V.S.S. effect does not work with Karaoke DVDs. ³V.S.S. will not work or will have less effect with some discs. ³Turn off the TV surround sound and other surround sound effects when using this effect. ³Sound will only come from the two main speakers if V.S.S. is on. DVD DVD For your reference [B] ³For optimum effect, it is recommended that the distance between the television and the listening position be about 3 to 4 times the distance between the right and left main speakers. ³You can also change the V.S.S. level with the On-screen Menu Icons [á “f Virtual Surround Sound (V.S.S.)”, page 27]. DVD B Speaker A Speaker ³V.S.S. effects V.S.S. 1 3 to 4 times distance A Stereo discs Surround signal recorded discs Listening position The main speakers sound further apart. Surround sound seems to come from the side. Advanced Operations A V.S.S. 2 The surround-like effect in V.S.S. 1 is increased. 21 Advanced operations TOP MENU MENU A » ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE REPEAT Press [REPEAT] during play. Each time this button is pressed, the TV monitor changes as illustrated and the disc will repeat a chapter or title (DVD) or a track (Video CD/CD). Repeat play starts when the display changes. ³DVD a Normal play b Repeat of chapter being played c Repeat of title being played d Cancel repeat mode (Normal play) REPEAT 1 2 3 4 5 6 7 8 9 0 S10 A-B V.S.S. SET UP CANCEL A REPEAT Advanced Operations b c d B ³Video CD/CD e Normal play f Repeat of track being played g Repeat of entire disc contents h Cancel repeat mode (Normal play) e a f C g T h OFF REPEAT Repeat play T To return to normal play Press [REPEAT] until “ OFF” is displayed. AA Note ³Repeat play may not work correctly with some DVDs. ³Repeat play does not work with an interactive DVD or during menu play of a Video CD with playback control. ³There is no mode for repeating the whole DVD. A OFF B » i To enjoy program repeat play [VCD] [CD] j TT PRG k AA PRG l A OFF PRG If [REPEAT] is pressed during program play (á page 23), the display changes as illustrated. i Program play j Repeat of track being played k Repeat of all programmed tracks l Cancel repeat mode (Program play) To return to program play Press [REPEAT] until “ OFF” is displayed. C TOP MENU MENU ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE C » Repeating sections between two specific points (A-B repeat) 1 Press [A-B] during play at the point where repeat play is to start (A). 2 Press [A-B] at the point where repeat play is to be concluded (B). REPEAT 1·2 1 2 3 4 5 6 A-B V.S.S. 7 8 9 0 S10 SET UP CANCEL 1 Repeat play of the section between points A and B starts. A-B A 2 To return to normal play Press [A-B] until “ &” is displayed. Note ³A-B repeat play does not work with an interactive DVD. ³Some subtitles recorded around point A or B may fail to appear (DVD). ³A-B repeat play works only within a title (DVD) or a track (Video CD/ CD). A-B AB 22 For your reference ³The end of a track or title is automatically determined as point B. Advanced operations POWER OPEN/CLOSE H/ I STOP PAUSE ∫ ; PLAY : 9 6 TOP MENU Cursor buttons/ ENTER Program play 3 1 SLOW/ SEARCH SKIP 6, 5SLOW/SEARCH 5 MENU The player plays the tracks on the disc in the order you specify. Up to 32 tracks can be programmed. If you enter over 32 tracks, the last programmed track is replaced with the new one. ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE 1 REPEAT 1 1 2 3 4 5 6 A-B 7 1 8 9 0 S10 2 SET UP CANCEL Track Time Clear 1 2 3 4 5 6 7 8 Clear all Total time Press the numeric buttons to select the track (á item 7 on page 7 for number entry). The selected track is stored in memory. ³If you press [ENTER], you can use the cursor buttons [3, 4] to select a track. Press [ENTER] to register the track number. ³Repeat step 2 to select another track. Choose a track, then press ENTER. PLAY MODE Press [PLAY MODE] while stopped until the illustrated screen appears. ³If “/” appears on the television, press [º STOP] to cancel the RESUME function, then press [PLAY MODE]. 2 V.S.S. CANCEL [VCD] [CD] 3 Press [1 PLAY]. Play now begins in the programmed sequence. Press PLAY to start FL display (e.g. CD) PROG. Flashes 2 Choose a track, then press ENTER. 1 2 3 4 5 6 7 8 9 0 S10 Track 5 1 2 3 4 5 6 7 8 Time Clear 2:02 Clear all Total time 2:02 Press PLAY to start To exit the screen Press [PLAY MODE] twice. To add tracks 1. Press [º STOP] twice during program play to show the program play screen. 2. Select the available item with the cursor buttons [3, 4], then repeat step 2. ³Press [6, 5 SLOW/SEARCH] to turn the pages of the program to make selection quicker. To return to normal play 1. Press [º STOP] twice during program play. (Program play is suspended.) 2. Press [PLAY MODE] twice. 3. Press [1 PLAY]. ³The program is retained in memory. Operation by observing the unit’s FL display ³Use the numeric buttons to enter track numbers. ³To check the program, press the cursor buttons [3, 4]. Advanced Operations ∫ STOP PROG. Track No. Program No. 3 PLAY 1 Clearing the program When the program play screen is displayed ³To clear the programmed tracks one by one Select the track, move to “Clear” with the cursor buttons and press [ENTER]. (Selecting the track and pressing [CANCEL] also clears the programmed track.) ³To clear the whole program Move to “Clear all” with the cursor buttons and press [ENTER]. (The program is also cleared when the player is switched to the standby mode or turned off, or the disc tray is opened.) 23 Advanced operations POWER OPEN/CLOSE H/ I ∫ STOP STOP PAUSE ∫ ; PLAY 1 SLOW/ SEARCH SKIP : 9 6 TOP MENU 2 5 MENU Random play [VCD] [CD] The player plays the tracks on the disc in random order. 1 ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE ³If “/” appears on the television, press [º STOP] to cancel the RESUME function, then press [PLAY MODE]. REPEAT 1 1 2 3 4 5 6 7 8 9 0 S10 Press [PLAY MODE] while stopped until the illustrated screen appears. 2 A-B Press [1 PLAY]. Play now begins in random order. V.S.S. SET UP CANCEL 1 PLAY MODE Random Playback Advanced Operations Press PLAY to start 24 2 PLAY 1 To exit the screen Press [PLAY MODE] once. To return to normal play 1. Press [º STOP] twice during random play. (Random play is suspended.) 2. Press [PLAY MODE] once. 3. Press [1 PLAY]. Using On-Screen Menu Icons DVD 1 30 OFF Î Digital 1 ENG 3/2.1ch 1:06:37 ***** OFF N ON 1 ENG OFF 1 On-Screen Menu Icons ON µ100 p100 3:37 OFF Examples of On-Screen Menu Icons [A] The screens depend on the disc contents. B » Video CD 1 On-Screen Menu Icons are long thin menus that contain information about the disc or player. These menus allow you to perform operations by changing this information. L R ***** PRG 1 PBC OFF µ40 p40 CD 1 2 3:37 OFF ***** PRG 3 µ50 B STOP PAUSE ∫ ; PLAY 1 SLOW/ SEARCH SKIP : 9 6 TOP MENU 2·3 1 1PLAY ³For some functions, the setting will be registered immediately; for others, [ENTER] or [1 PLAY] must be pressed. ³When numbers are displayed (e.g. title No.), the numeric buttons are also effective for setting instead of the cursor buttons [3, 4]. When numbers are entered with numeric buttons, press [ENTER] to register the setting. MENU To clear the On-Screen Menu Icons Press [RETURN] or [CANCEL]. ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE RETURN 1 2 3 4 5 6 7 8 9 0 S10 A-B V.S.S. SET UP CANCEL 1 Press the cursor buttons [3, 4] to select the setting. 5 REPEAT CANCEL Press the cursor buttons [2, 1] to select the item. The item is highlighted in yellow. ON p50 Press [ON SCREEN] during play or in the stop mode. Each time this button is pressed, the TV monitor changes as shown below. [> On-Screen Menu Icons for disc information l ; l On-Screen Menu Icons for player information l ; l Shuttle screen l ; {= On-Screen Menu Icons cleared ³Some functions cannot be accessed from the stop mode. ON N F Common procedures Advanced Operations A Numeric buttons For your reference ³The On-Screen Menu Icons may not be displayed when playing some kinds of DVD software, or if the television’s automatic picture zoom function is on. Change the position of the On-Screen Menu Icons in “4 On-Screen Messages” if this occurs (á page 31). ³The color (blue, violet or green) of the On-Screen Menu Icons can be changed (á page 31). ³“# $” around the icon means that the item can be changed using the cursor buttons [3, 4]. 2 ON SCREEN 2 3 25 Using On-Screen Menu Icons Detailed descriptions of each icon Screen for disc information º DVD a b Advanced Operations 1 c 30 de English French German Italian Spanish Dutch SVE: NOR: DAN: POR: RUS: JPN: Swedish Norwegian Danish Portuguese Russian Japanese CHI: KOR: MAL: VIE: THA: ¢: g hi j Î Digital 1 ENG 3/2.1ch 1:06:37 a Title No. Change the No. with the cursor buttons [3, 4] or the numeric buttons and press [ENTER]. b Chapter No. Change the No. with the cursor buttons [3, 4] or the numeric buttons and press [ENTER]. c Time (hour:minute:second) Enter the time from which you want to start play and press [ENTER]. Example: To specify “1 hour 6 min. 37 sec.”, enter “10637”. d Soundtrack No. Change the No. with the cursor buttons [3, 4] or the numeric buttons. e Soundtrack ENG: FRA: DEU: ITA: ESP: NLD: f Chinese Korean Malay Vietnamese Thai Others ON 1 ENG 1 f Audio attribute Shows the audio attributes of the selected soundtrack. LPCM/ë Digital/DTS: Signal type k: Sampling frequency (kHz) b: Number of bits (bit) ch: Number of channels¤ Vocal: Vocals indication ³You can switch vocals ON or OFF with the cursor buttons [3, 4]. [DVD Karaoke (Solo)]: – – – (OFF) or ON [DVD Karaoke (Duet)]: – – – (OFF), V1iV2, V1 or V2 g Subtitle language No. Change the No. with the cursor buttons [3, 4] or the numeric buttons. h Subtitle on/off Select “ON” or “OFF” with the cursor buttons [3, 4]. OFF: Subtitle is cleared. ON: Subtitle is displayed. i Subtitle language See the table under item e. j Angle No. Change the No. with the cursor buttons [3, 4] or the numeric buttons. º Video CD/CD k l 1 m 3:37 n L R PBC OFF k Track No. Change the No. with the cursor buttons [3, 4] or the numeric buttons and press [ENTER]. l Time (minute:second) Display is changed each time the cursor buttons [3, 4] are pressed. (The times cannot be changed.) Elapsed playing time(------------)Remaining time of the track ^-------------)Remaining time of the disc(-------------J m Audio mode [VCD] Change the mode with the cursor buttons [3, 4]. LR: Left channel sound is output from the left speaker (L), and right channel sound is output from the right speaker (R). L: Left channel sound only is output from the speakers (L/R). R: Right channel sound only is output from the speakers (L/R). n Playback control [VCD] Shows whether menu play is on or off (cannot be changed here). OFF: Menu play is OFF. ON: Menu play is ON. Note ³The information actually displayed depends on the disc. ³During program and random play of Video CDs and CDs, the remaining time of the disc is not displayed. ¤Example: 3/2 .1ch .1: Subwoofer signal (not displayed if there is no subwoofer signal) .0: No surround .1: Mono surround .2: Stereo surround (left/right) .1: Center .2: Main leftiMain right .3: Main leftiMain rightiCenter 26 Screen for player information b OFF c d OFF ***** e f N g OFF ON d Marker (Marking parts you want to watch or listen to again) Press [ENTER] during play and press [ENTER] again at the preferred point to store a marker. (Marker no. replaces “¢”.) (Up to 5 markers can be stored in the memory.) To store the next marker, press the cursor button [1]. ³To recall a marker Select the marker no. with the cursor buttons [2, 1] and press [ENTER]. ³To clear a marker Select the marker no. with the cursor buttons [2, 1] and press [CANCEL]. ³Some subtitles recorded around the marker may fail to appear. ³All the markers are cleared when the player is switched to the standby mode or turned off, or the disc tray is opened. e Cinema image [DVD] [VCD] Select the mode with the cursor buttons [3, 4] while a disc is loaded. N: Normal mode C: Cinema mode (Cinema image): Picture for viewing movies f Virtual Surround Sound (V.S.S.) [DVD] (Dolby Digital, 2-channel or over only) (á page 21) Select the level during play with the cursor buttons [3, 4]. OFF: V.S.S. off 1: V.S.S. natural effect 2: V.S.S. emphasized effect g Turning subwoofer output on and off (á page 10) Select “ON” or “OFF” with the cursor buttons [3, 4]. ON: If you have connected a subwoofer OFF: If you have not connected a subwoofer a A–B repeat play Press [ENTER] during play to store location A and press [ENTER] again to store location B. Repeat play between the two locations starts. Press [ENTER] again to return to normal play. b Repeat play Select the mode during play with the cursor buttons [3, 4]. [DVD] OFF: Normal play C: Chapter repeat play T: Title repeat play [VCD] [CD] OFF: Normal play T: Track repeat play A: Disc repeat play c Cinema dialogue [DVD] OFF Select the mode during play with the cursor buttons [3, 4]. OFF: Normal volume ON: Louder volume for dialogue Play mode ___ [VCD] [CD] (á pages 23 and 24) The current play mode is shown (cannot be changed here). PRG: Program play RND: Random play –– –: Normal play Advanced Operations a Note ³A-B repeat play does not work with an interactive DVD. ³Repeat play and marker functions do not work with an interactive DVD or during menu play of a Video CD with playback control. ³Cinema dialogue is effective with Dolby Digital, three channels or over, where the dialogue is recorded in the center channel. Shuttle screen h Maximum speed DVD: j100 Video CD: j40 CD: j50 i j µ100 p100 k h Slow-motion play (Backward) [DVD] Press the cursor buttons [3]>[2]. i Still/Pause Press the cursor button [3]. j Slow-motion play (Forward) [DVD] [VCD] Press the cursor buttons [3]>[1]. l Maximum speed DVD: i100 Video CD: i40 CD: i50 m k Rapid reverse Press the cursor buttons [4]>[2]. l Play Press the cursor button [4]. m Rapid advance Press the cursor buttons [4]>[1]. For your reference ³Each time the cursor buttons [2, 1] are pressed, the speed of rapid reverse/advance and slow-motion play increases up to 5 steps. 27 Changing initial settings POWER OPEN/CLOSE H/ I STOP PAUSE ∫ ; 1 SLOW/ SEARCH SKIP : Change the initial settings to suit your preference and to suit the player to the environment in which it is being used. PLAY 9 6 TOP MENU 5 Common procedures MENU 2·3 1 ENTER ON SCREEN RETURN PLAY MODE SUBTITLE AUDIO ANGLE RETURN REPEAT 1 2 3 4 5 6 The initial settings screen is displayed. 2 A-B V.S.S. 7 Advanced Operations 1 1 8 9 0 S10 1 Disc Languages (á page 29) Change the soundtrack language, subtitle language and the language used in the disc’s menu to be used for every disc played back. 2 Ratings (á page 30) Change the ratings level to prevent play of discs, skip violent scenes, or replace scenes with others by entering a password. This is also called a parental lock. 3 Menu Language (á page 31) Change the language used for the on-screen displays and initial settings menus. 4 On-Screen Messages (á page 31) Choose whether “Play”, “Still” and other displays will be displayed or not, and the color and position of these displays as well as On-Screen Menu Icons. 5 FL Display (á page 31) Change the brightness for the FL display. 6 TV Aspect (á page 31) Change the settings to suit the type of television you have connected. 7 Digital Audio Output (á page 32) Change the settings to suit the type of digital equipment you have connected. 9 Other Settings (á page 34) Choose the kind of picture shown when play is paused, and various other settings to enhance your viewing experience. SET UP CANCEL SET UP Level 8 English Bright 4:3 9 Other Settings Press RETURN to exit 2 ENTER Press the cursor buttons [3, 4] to select the item and press [ENTER]. Each item that can be modified is displayed. Numeric buttons 1 Disc Languages 2 Ratings 3 Menu Language 4 On-Screen Messages 5 FL Display 6 TV Aspect 7 Digital Audio Output Press [SET UP] in the stop mode. 3 Press the cursor buttons [3, 4] to select the setting and press [ENTER]. ³Some items require additional steps. (See the respective page.) Setting is finished and the initial settings screen is displayed. 3 ENTER To cancel during setup operation Press [RETURN]. (The previous screen is displayed.) To exit the initial settings screen Press [SET UP] or [RETURN]. Note ³There is no No. 8 in the initial settings menu of this player. For your reference ³The numeric buttons can also be used instead of the cursor buttons [3, 4] for selecting items or settings. Pressing [ENTER] is not necessary. 28 1 Disc Languages [DVD] See page 28 for operation. 1 Audio English 2 Subtitle Automatic 3 Menus English 1 Audio 1 English (Factory preset) 2 French 3 Spanish 4 Original The original language of each disc will be selected. 5 Other ¢¢¢¢ Another language can be selected.¤ 2 Subtitle 1 Automatic (Factory preset) Subtitle language will automatically be selected in accordance with the soundtrack language. ³If the language selected for the “1 Audio” is actually used during playback, the subtitles will not appear. ³If another language is used during playback, the subtitles will appear in the language selected at the setup “1 Audio”. 2 English 3 French 4 Spanish 5 Other ¢¢¢¢ Another language can be selected.¤ 3 Menus 1 English (Factory preset) 2 French 4 Other ¢¢¢¢ Another language can be selected.¤ Press RETURN to exit 3 Spanish ¤Enter the language code if you select “Other”. (See the language code list below.) Press [CANCEL] if you enter the wrong number. Note ³If the language selected is not available on the disc, the language designated by each disc will be selected. There are cases where the language is recorded but the disc designates another language. Advanced Operations Disc Languages Language code list 6565: 6566: 6570: 6577: 6582: 6583: 6588: 6590: 6665: 6669: 6671: 6672: 6678: 6679: 6682: 6765: 6779: 6783: 6789: 6865: 6869: Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bengali; Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German 6890: 6976: 6978: 6979: 6983: 6984: 6985: 7065: 7073: 7074: 7079: 7082: 7089: 7165: 7168: 7176: 7178: 7185: 7265: 7273: 7282: Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian 7285: 7289: 7365: 7378: 7383: 7384: 7387: 7465: 7473: 7487: 7565: 7575: 7576: 7577: 7578: 7579: 7583: 7585: 7589: 7665: 7678: Hungarian Armenian Interlingua Indonesian Icelandic Italian Hebrew Japanese Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean Kashmiri Kurdish Kirghiz Latin Lingala 7679: 7684: 7686: 7771: 7773: 7775: 7776: 7778: 7779: 7782: 7783: 7784: 7789: 7865: 7869: 7876: 7879: 7982: 8065: 8076: 8083: Laotian Lithuanian Latvian, Lettish Malagasy Maori Macedonian Malayalam Mongolian Moldavian Marathi Malay Maltese Burmese Nauru Nepali Dutch Norwegian Oriya Punjabi Polish Pashto, Pushto 8084: 8185: 8277: 8279: 8285: 8365: 8368: 8372: 8373: 8375: 8376: 8377: 8378: 8379: 8381: 8382: 8385: 8386: 8387: 8465: 8469: Portuguese Quechua Rhaeto-Romance Romanian Russian Sanskrit Sindhi Serbo-Croatian Singhalese Slovak Slovenian Samoan Shona Somali Albanian Serbian Sundanese Swedish Swahili Tamil Telugu 8471: 8472: 8473: 8475: 8476: 8479: 8482: 8484: 8487: 8575: 8582: 8590: 8673: 8679: 8779: 8872: 8979: 9072: 9085: Tajik Thai Tigrinya Turkmen Tagalog Tonga Turkish Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapük Wolof Xhosa Yoruba Chinese Zulu 29 Changing initial settings 2 Ratings [DVD] See page 28 for operation. Please set a rating limit 8 No Limit 7 6 5 4 3 2 1 0 Lock All Press RETURN to exit Level 8 (Factory preset) All DVDs can be played. Level 7 to 1 Prevents play of DVDs with ratings recorded on them (those that contain adult or violent scenes). Level 0 Playback of all DVDs is prohibited (e.g. to prohibit playback of DVDs for adults which are not encoded with rating information). Note ³The rating method differs from disc to disc. There are discs designed for adults that do not have these ratings recorded on them. These discs can be played as normal. To prevent play of these discs, set the rating limit to “0 Lock All”. Advanced Operations Setting ratings (When the level is “8”) Ratings Enter a 4-digit password, then press ENTER. 1 Select the level with the cursor buttons [3, 4] and press [ENTER]. 2 Enter a 4-digit password with the numeric buttons and press [ENTER]. ³Press [CANCEL] if you enter the wrong number. The lock symbol appears closed to show the rating is locked. Do not forget your password. **** Press RETURN to exit 3 Press [ENTER]. Setting is finished and the initial settings screen is displayed. Now when you insert a DVD that exceeds the ratings limits you set, a message appears on the television. If you want to play the disc, select “Yes” and enter your password. The unit will unlock temporarily, locking again when the disc tray is opened or the unit is turned off. Ratings The player is locked. Remember the password. Your selection exceeds the player’s rating limit. Do you want to change the limit? Yes No 4 3 4 3 Press ENTER to continue Example: “4343” Changing ratings (When the level is “0” to “7”) Changes to the settings also requires a password. Ratings 1 Unlock Player 2 Change Password 3 Change Level 4 Temporary Unlock Press RETURN to exit 1 Press the cursor buttons [3, 4] to select “2 Ratings” in the initial settings screen and press [ENTER]. 2 Enter your 4-digit password with the numeric buttons and press [ENTER]. 3 Press the cursor buttons [3, 4] to select the item. To unlock the player (the rating level returns to 8) Select “1” and then press [ENTER]. To change the password Select “2” and press [ENTER]. Enter a new 4-digit password and press [ENTER], then press [ENTER] again. To change the rating level Select “3” and press [ENTER]. Select a new level with the cursor buttons [3, 4], then press [ENTER]. 30 To unlock the player temporarily Select “4” and then press [ENTER]. ³The rating is unlocked temporarily for the current disc. The player is locked again when the disc tray is opened or the player is switched to the standby mode or turned off. 3 Menu Language Example: If you selected “2 Français” See page 28 for operation. Select the language for these Menus. 1 English 2 Français 3 Español 1 English (Factory preset) 2 Français 3 Español Choisissez la langue des menus du lecteur. 1 English 2 Français 3 Español Press RETURN to exit Appuyez sur RETURN pour quitter 4 On-Screen Messages On-Screen Messages 1 On-Screen Messages On 2 Color and Position Blue 1 On-Screen Messages 1 On (Factory preset) 2 Off 2 Color and Position 1 Blue (Factory preset) 2 Violet 3 Green 4 Blue 5 Violet 6 Green Press RETURN to exit Shown slightly lower. Select if the top of the screen is cut off. Advanced Operations See page 28 for operation. 5 FL Display See page 28 for operation. FL Display 1 Bright (Factory preset) 2 Dim 1 Bright 2 Dim Press RETURN to exit 6 TV Aspect See page 28 for operation. Select your TV aspect 1 4:3 2 16 : 9 Press RETURN to exit Preparation ³Switch the video input mode on the television to suit the type of connection you have made (e.g., VCR 2). 1 4:3: (Factory preset) Select when a conventional television is connected. 2 16:9: Select when a wide-screen television is connected. For your reference ³For further details on the images which appear on the TV screen, see page 35. ³The optimum settings for your television may differ to those shown above. 31 Changing initial settings 7 Digital Audio Output See page 28 for operation. Digital Audio Output 1 PCM Down Conversion No 2 Dolby Digital Bitstream 3 DTS Digital Surround Off 1 PCM Down Conversion¤1 Select whether to output audio on DVD recorded in 96 kHz linear PCM as it is (No) or to convert it to 48 kHz for output (Yes). 1 No (Factory preset) When playing a DVD recorded in 96 kHz linear PCM, signal of 96 kHz/24 bit sampling frequency will be output and you can enjoy high quality sound. If the DVD is copyrightprotected, no digital signal will be output unless converted to 48 kHz. ³Signal of 48 kHz linear PCM can be output from digital audio output terminal irrespective of the setting. 2 Yes When playing a DVD recorded in 96 kHz linear PCM, signal is converted to 48 kHz/16 bit and can be output from digital audio output terminal even if the DVD is copyright-protected. 2 Dolby Digital To select the signal format (Bitstream or PCM) to be output from the optical digital audio output terminal during playback of DVDs recorded in Dolby Digital. 1 Bitstream¤2 (Factory preset) Dolby Digital bitstream (1ch–5.1ch) is output during playback of DVDs recorded in Dolby Digital. 2 PCM Digital audio converted to 48 kHz/16 bit PCM (2ch) is output during playback of DVDs recorded in Dolby Digital. 3 DTS Digital Surround To select whether DTS Digital Surround bitstream is output from the optical digital audio output terminal or no digital audio is output during playback of DVDs recorded in DTS Digital Surround. 1 Off (Factory preset) No digital audio is output during playback of DVDs recorded in DTS Digital Surround. 2 Bitstream¤2 DTS Digital Surround bitstream (1ch–5.1ch) is output during playback of DVDs recorded in DTS Digital Surround. Advanced Operations Press RETURN to exit 32 Recommended setting of “Digital Audio Output” Adjust settings as shown in table below depending on the kind of equipment that is connected to the optical digital audio output terminal. Recommended setting 1 PCM Down Conversion¤1 2 Dolby Digital 3 DTS Digital Surround No Bitstream Off Yes Bitstream Off DTS Digital Surround decoder (á page 9) Yes PCM Bitstream Dolby Digital/DTS Digital Surround decoder (á page 9) Yes Bitstream Bitstream Digital audio equipment (no decoder) (á page 11) Yes PCM¤2 Off¤2 No digital equipment is connected Dolby Digital decoder (á page 9) ³Underlined items are factory preset. ¤1 Select “No” if the digital audio input terminal of your audio equipment (AV amplifier, etc.) can handle 96 kHz/24 bit signal. If it is not acceptable for 96 kHz/24 bit digital audio signal, or the 96 kHz linear PCM disc you want to play is copyright-protected, it is recommended to set “1 No” and make analog connection to enjoy high quality sound (If it is set to “Yes”, the player converts linear PCM to 48 kHz even during analog output). ¤2 When connecting an amplifier (with an optical digital input terminal) which does not contain a Dolby Digital or DTS Digital Surround decoder, be sure to select “PCM” at “2 Dolby Digital” and “Off” at “3 DTS Digital Surround”. If “Bitstream” is selected, any attempt to play DVDs (or CDs encoded with DTS) may cause a high level of noise that can injure your ears and damage your speakers. Advanced Operations Type of equipment connected For your reference ³Dolby Digital is a digital sound compression technique developed by Dolby Laboratories. Supporting 5.1-channel surround sound, as well as stereo (2-channel) sound, this technique enables a large quantity of sound data to be efficiently recorded on a disc. ³DTS Digital Surround is a 5.1-channel surround sound system, which is widely used in movie theaters around the world. The separation between channels is good and provides a very real surround effect. ³Linear PCM is an uncompressed digital audio signal. While a CD is recorded in 44.1 kHz/16 bit, a DVD is recorded in 48 kHz/16 bit up to 96 kHz/ 24 bit. Therefore, the sound reproduced with these signals is potentially better than that found on CDs. This player reproduces linear PCM in two channels. ³Bitstream is a compressed digital audio signal. This signal can be decoded into different channels to produce, for instance, 5.1-channel surround sound. ³The digital audio output terminal (optical) converts electrical signals into optical signals and transfers them to an amplifier. These optical signals are immune from electrical interference, and they also have minimal effect on other equipment. ³These changes to digital audio output must be made, otherwise bitstream signals the decoder cannot handle will be output. If these signals are output, “noise” will be output which can cause harm to your ears and speakers. Note ³You cannot use DTS Digital Surround decoders not suited to DVD. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. + 1992–1997 Dolby Laboratories. All rights reserved. 33 Changing initial settings 9 Other Settings See page 28 for operation. Other Settings 1 Still Mode 2 Audio during Search 3 TV Mode (4:3) 4 D. Range Compression 5 Still Picture Display 6 Black Level Control Automatic On Pan&Scan Off Off Lighter Advanced Operations Press RETURN to exit 1 Still Mode Select either “Field still” or “Frame still” in the still picture mode. 1 Automatic (Factory preset) 2 Field Select this setting when jittering occurs in the still picture mode when “1 Automatic” is selected. 3 Frame Select if small text or fine patterns cannot be seen clearly in the still picture mode when “1 Automatic” is selected. 2 Audio during Search To select whether audio is heard or not during search (forward direction) at the initial search speed. 1 On (Factory preset) 2 Off 3 TV Mode (4:3) To select whether widescreen material is played in the pan and scan style or in the letterbox style on a conventional TV (4:3). 1 Pan & Scan (Factory preset) Wide-screen video material will be played in the pan and scan style (the picture is shown with either one or both sides cut off) on a conventional television (4:3). ³Video material not formatted in the pan and scan style will be played back in the letterbox style. 2 Letterbox Wide-screen video material will be played in the letterbox style (black bands appear at the top and bottom of the screen) on a conventional television (4:3). 4 D.(Dynamic) Range Compression To compress the dynamic range (the difference between the loudest sound and the softest sound), making it easier to hear dialogue even at low volume. This function only works with Dolby Digital DVD. 1 Off (Factory preset) The dynamic range remains as it was recorded on the disc. 2 On Dynamic range is compressed by increasing soft sounds and reducing loud sounds. Select when viewing discs at low volume, such as late at night. 5 Still Picture Display To display the picture type (DVD), I, P or B in the still picture mode. 1 Off (Factory preset) 2 On Still (P) Example: P-picture 6 Black Level Control To select the black level of the picture, “Lighter” or “Darker”. 1 Lighter (Factory preset) Select when the player is connected to a TV through the VIDEO OUT terminal or S VIDEO OUT terminal. 2 Darker Select when the player is connected to a TV through the COMPONENT VIDEO OUT (Y/PB/PR) terminals. Note ³Audio is heard at any speed when playing CDs, regardless of any settings at “2 Audio during Search”. ³Audio is not heard at any speed when playing CDs encoded with DTS, regardless of any settings at “2 Audio during Search”. 34 For your reference ³I/P/B To efficiently store video on DVD, common elements among frames are used in common, and different elements are recorded with each individual frame. The frame that contains the common elements is called an I-picture, a complete frame in itself. A P-picture is calculated from past I or P-pictures. The frame that fills in the spaces between the I-and P-pictures is called the B-picture. I-pictures have the best picture quality, so they should be used when making picture adjustments. ³Frame Individual images in a video or on the television are called frames. ³Field Half of the video information (video signal) in a frame is called a field. With conventional TV systems, a single frame (a single screen) consists of two fields. ³Frame still The two fields are displayed alternately on the TV screen, so the image may be blurry. However, the image quality is better than field images. ³Field still Only one field (half of the video information) is displayed on the TV screen, so the apparent resolution is low. However, there is no blurring on the screen. DVD software is recorded in a variety of picture formats, and how they appear on your TV depends on the software, the kind of TV you have, and the picture mode your TV is set to. ³Letterbox refers to pictures where black bands appear at the top and bottom. ³Pan and scan refers to pictures where part of the picture is cut off so it fills the whole screen. Television and picture mode 4:3 16:9 full mode 16:9 zoom mode 16:9 auto mode Software format Wide-screen, pan and scan Edges cut off. Full screen Top and bottom cut off Full screen Wide-screen, non-pan and scan Letterbox Regular (4:3) Full screen Screen stretched horizontally Top and bottom cut off Full screen with black bands at right and left Regular (4:3) letterbox Letterbox Letterbox with screen stretched horizontally Full screen Letterbox with extremities of picture stretched. Advanced Operations How different kinds of software appear on your television The names given to the television picture modes depends on the make of your television. There may also be slight differences in how the pictures appear on the screen. Refer to your television’s operating instructions for details. 35 Troubleshooting Guide Before requesting service for this player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, contact your authorized YAMAHA dealer or service center for instructions. Reference pages are shown as black circled numbers 6. For Your Reference Common Problems 36 No power. Insert the AC power supply cord securely into the household AC outlet. 9 The player is automatically switched to the standby mode. To conserve power, the player is automatically switched to the standby mode after approx. 30 minutes elapsed in the stop mode (Auto power-off function). Turn the power back to ON. Play fails to start even when [1 PLAY] is pressed. Play starts but then stops immediately. Condensation has formed: wait about 1 to 2 hours for it to evaporate. This player cannot play discs other than DVD, Video CD and CD. 6 DVDs with a region number other than “1” or “ALL” cannot be played. DVDs with multiple region numbers including “1” can be played. 6 The disc may be dirty and may require cleaning. V Ensure that the disc is installed with the label of the side to be played facing upwards. > No picture. Ensure that the equipment is connected properly. < = Ensure the television’s video input setting (e.g. VCR2) is correct. No sound. Distorted sound. Ensure that the equipment is connected properly. 8–= Ensure that the input settings for the television and stereo system are correct. Turn V.S.S. off if it is on. E K Picture is distorted during rapid advance or rapid reverse. The picture will be somewhat distorted at times: this is normal. No key operation (by the player and/or the remote control) is effective. Some operations may be prohibited by the disc. Press [STANDBY/ON] to switch the player to the standby mode and then back to ON. Alternatively, press [STANDBY/ON] to switch the player to the standby mode, disconnect the AC power supply cord and then reconnect it. (The player may not be operating properly due to lightning, static electricity or some other external factor.) The picture shown on the television is not normal. (The sides of the picture are cut off or black bands appear at the top and bottom of the screen.) Go to the initial settings menu “6 TV Aspect” and change the setting to suit your television. You may also need to change the screen mode on the television itself. O S No on-screen display. The “Off” setting is selected for “1 On-Screen Messages” in “4 On-Screen Messages”: select “On”. O On-Screen Menu Icons not displayed or only partially displayed on the TV screen. Change the position of the On-Screen Menu Icons using “2 Color and Position” in “4 On-Screen Messages” of the initial settings. O The language for the player’s menus and on-screen messages is wrong. Go to the initial settings menu “3 Menu Language” and change the language. O No operations can be performed with the remote control. To conserve power, the player is automatically switched to the standby mode after approx. 30 minutes have elapsed in the stop mode (Auto power-off function). Turn the power back to ON. Check the batteries are installed with the correct polarities (i and j). 5 The batteries are depleted: replace them with new ones. 5 Point the remote control at the remote control sensor and operate. 5 Operate the remote control at a distance of not more than 23 feet (7 m) from the remote control sensor. 5 Remove the obstacles between the remote control and remote control sensor. 5 No subtitles. Subtitles appear only with discs which contain them. Subtitles are cleared from the TV monitor. Display the subtitles. D J Alternative soundtrack (or subtitle) languages fail to be selected. An alternative language is not selected with discs which do not contain more than one language. In the case of some discs, the alternative language cannot be selected by operating the [AUDIO] or [SUBTITLE]. Try selecting it from the disc’s menu if one is available. B Angle cannot be changed. This function is dependent on software availability. Even if a disc has a number of angles recorded, these angles may be recorded for specific scenes only (when “ANGLE” lights up on the player’s FL display). Soundtrack and/or subtitle language is not the one selected at the initial settings. If the soundtrack and/or subtitle language does not exist on the disc, the language selected at the initial settings will not be seen/heard. The disc’s menu is displayed in French (example). The setup “3 Menus” of “1 Disc Languages” is set to French: select English. Sound does not come from a speaker. Check the connections. 8–= If you have a subwoofer connected to this player, use the On-Screen Menu Icons with the remote control to turn subwoofer output on. K If you have connected this player to an AV amplifier (with built-in decoder) through the digital audio output terminal, go to the initial settings menu “7 Digital Audio Output” and change the settings to “Bitstream” for “2 Dolby Digital” or “3 DTS Digital Surround”. P Sound will only come from the two main speakers if V.S.S. is on. Turn V.S.S. off. E K The password for rating level has been forgotten. Reset all the settings to Factory Preset. While stopped, press and hold [:] and [;] on the player and then also press and hold [< OPEN/ CLOSE] on the player until “Initialized” disappears from the television (after about 3 seconds). All initial settings will return to the default values. The vocals cannot be turned off. You have selected an audio channel that includes a vocal channel. Read the disc’s jacket to choose the correct channel. C A menu is shown after playing each song on a Karaoke DVD. Most Karaoke DVDs are designed to do this. Some discs have an item in the menu that allows you to play all the songs. Video CD This function works only for Video CDs with playback control. 6 No menu play. For Your Reference DVD Self-diagnosis display function When an error or trouble is detected during operation, a message appears in the FL display. When a message has appeared, check the details given below. Message CHECK THE DISC H¸¸ ¸ ¸ stands for a number. Player status Remedy Disc is dirty. Wipe the disc clean. Trouble is likely to have occurred. The number following “H” differs depending on the status of the player. Press [STANDBY/ON] to switch the player to the standby mode and then back to ON. Alternatively, press [STANDBY/ON] to switch the player to the standby mode, disconnect the AC power supply cord, and then reconnect it. ³If the message fails to be cleared, even when remedial action is taken, ask a service technician to repair the player. 37 Disc handling Choose discs with these marks: However, do not use irregulary shaped discs, such as heart-shaped. (Discs of the sort can damage the player.) º How to hold a disc Do not touch the recorded surface. º If the surface is dirty For Your Reference Wipe it with a damp cloth and then wipe dry. º If the disc is brought from a cold to a warm environment, moisture may form on the disc Wipe with a soft, dry, lint-free cloth before using the disc. º Handling precautions ³Do not write on the label side with a ball-point pen or other writing instrument. ³Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. ³Do not attach labels or stickers to discs. (Do not use discs with exposed adhesive from tape or left over peeled off stickers.) ³Do not use scratch-proof protectors or covers other than those specified for use with this player. º Do not place or store discs in the following places ³Locations exposed to direct sunlight ³Humid or dusty locations ³Locations directly exposed to a heat vent or heating appliance 38 Maintenance To clean this unit, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in a soapand-water solution or a weak detergent solution. ³Never use alcohol, paint thinner or benzine to clean this unit. ³Before using chemically treated cloth, read the instructions that came with the cloth carefully. Specifications AC 120 V, 60 Hz AC 220–240 V, 50 Hz AC 220–240 V, 50 Hz AC 110–240 V, 50/60 Hz 14 W 171/8q (W)k107/8q (D)k37/8q (H) [435 (W)k276 (D)k99 (H) mm] 7 lbs. 4 oz (3.3 kC) Mass: Signal system: U.S.A. and Canada models: NTSC U.K., Europe and Australia models: PAL 625/50, PAL 525/60 General model: PAL/NTSC Operating temperature range: i41 to i95 oF (i5 to i35 oC) Operating humidity range: 5 to 90 % RH (no condensation) Discs played: (1) DVD-Video disc 5q (12 cm) single-sided, single-layer 5q (12 cm) single-sided, dual-layer 5q (12 cm) double-sided, single-layer 3q (8 cm) single-sided, single-layer 3q (8 cm) single-sided, dual-layer 3q (8 cm) double-sided, single-layer (2) Compact disc (CD-DA, Video CD) 5q (12 cm) disc 3q (8 cm) disc Video output: Output level: 1 Vp-p (75 ­) Output terminal: Pin jack Number of terminals: 1 system S video output: Y output level: 1 Vp-p (75 ­) C output level: 0.286 Vp-p (75 ­) Output terminal: S terminal Number of terminals: 1 system Component video output: Asia and Australia models: Y output level: PB output level: PR output level: Output terminal: 1 Vp-p (75 ­) 0.7 Vp-p (75 ­) 0.7 Vp-p (75 ­) Pin jack (Y: green, PB: blue, PR: red) Scart video terminal: U.K. and Europe models: Audio output: Output level: 2 Vrms (1 kHz, 0 dB) Output terminal: Pin jack Mixed output (L/R): 1 system Subwoofer output: 1 system Audio signal output characteristics: (1) Frequency response: ³DVD (linear audio): 2 Hz–22 kHz (48 kHz sampling) 2 Hz–44 kHz (96 kHz sampling) ³CD audio: 2 Hz–20 kHz (EIAJ) (2) S/N ratio: ³CD audio: 115 dB (EIAJ) (3) Dynamic range: ³DVD (linear audio): 102 dB ³CD audio: 98 dB (EIAJ) (4) Total harmonic distortion: ³CD audio: 0.0025 % (EIAJ) Digital audio output: Optical digital output: Optical terminal Pickup: Wave length: Laser power: Laser output: 665 nm CLASS II Max. 1.0 mW (Continuous) Power consumption in standby mode: approx. 2.0 W Note Specifications are subject to change without notice. Mass and dimensions are approximate. For Your Reference Power supply: U.S.A. and Canada models: U.K. and Europe models: Australia model: Asia model: Power consumption: Dimensions: This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 39 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. PA PARIS-EST RUE AMBROISE CROIZAT CROISSY-BEAUBOURG BP70-77312 MARNE LAVALLEE, CEDEX 2 FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Printed in Japan
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Yamaha DV-S5270 Handleiding

Categorie
Dvd spelers
Type
Handleiding