Motorola RFS-6010-100R0-WR Installatie gids

Merk: Motorola

Model: RFS-6010-100R0-WR

Categorie: Netwerkschakelaars

Type: Installatie gids

RFS6000 Series RF Switch

Installation Guide

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.

Symbol is a registered trademark of Symbol Technologies, Inc. All other product or service

1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2.0 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3.0 LED Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4.0 Hardware Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5.0 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

6.0 Part Numbers, Support, and Sales . . . . . . . . . . . . . . . . . . . . . 24

7.0 End-User License Agreement . . . . . . . . . . . . . . . . . . . . . . . . . 25

Contents

Introduction

1 Introduction

The Motorola RFS6000 Series RF Switch is a high-performance member of Motorola’s Wireless

Switch family. The RFS6000 Series RF Switch provides centralized Wireless LAN (WLAN)

configuration and management by coalescing a network “intelligence” previously spread across

physically distributed access points. By replacing access points with simpler access ports (or “thin”

access points), the RFS6000 Series RF Switch becomes a WLAN’s single point of contact, thus

reducing wireless networking complexity by moving management out of the ceiling and into the

wiring closet. In addition, through the use of patented Virtual AP architecture, the RFS6000 Series

RF Switch lets you create multiple WLANs without changing or adding to the existing wired network

infrastructure.

This document is written for the network device installer.

1.1 Package Contents

Inspect the package contents and report any missing or damaged items to your sales representative.

The package should contain the following:

• RFS6010 RF Switch with Rack Brackets installed

• Console Cable

• Installation Guide (this document)

• China RoHS compliance document

1.2 Document Conventions

The following graphical alerts are used in this document to indicate notable situations:

NOTE Tips, hints, or special requirements that you should take note of.

CAUTION Care is required. Disregarding a caution can result in data loss or

equipment malfunction.

WARNING! Indicates a condition or procedure that could result in personal injury or

equipment damage.

Introduction

1.3 Warnings

• Read all installation instructions and site survey reports, and verify correct equipment installation before connecting

the system to its power source.

• Remove jewelry and watches before installing this equipment.

• Install the equipment in a rack with adequate dimensions and weight allowances.

• Verify the rack is anchored and cannot tip over or break away from its mountings.

• Verify the unit is grounded before connecting it to the power source.

• Verify any device connected to this unit is properly wired and grounded.

• Connect all power cords to a properly wired and grounded electrical circuit.

• Verify the electrical circuits have appropriate overload protection.

• Attach only approved power cords to the device.

• Motorola strongly recommends the use of an Uninterruptible Power Supply (UPS) that supports the RFS6000 Series

RF Switch power rating. Not using a UPS can result in data loss or equipment damage due to a power surge or power

failure.

• Verify that the power connector and socket are accessible at all times during the operation of the equipment.

• Do not work with power circuits in dimly lit spaces.

• Do not install this equipment or work with its power circuits during thunderstorms or other weather conditions that

could cause a power surge.

• Verify there is adequate ventilation around the device, and ambient temperatures meet equipment operation

specifications.

1.4 Site Preparation

• Consult your site survey and network analysis reports to determine specific equipment placement, port capacity,

power drops, and so on.

• Assign installation responsibility to the appropriate personnel.

• Identify where all installed components are located.

• Verify appropriate rack mounting requirements.

• Provide a sufficient number of power drops for your equipment.

• Ensure adequate, dust-free ventilation to all installed equipment.

• Identify and prepare Ethernet and console port connections.

• Verify that cable lengths are within the maximum allowable distances for optimal signal transmission.

• Verify that the RFS6000 Series RF Switch is powered through an Uninterruptible Power Supply (UPS).

Specifications

2 Specifications

2.1 Physical Specifications

2.2 Power Cord Specifications

A power cord is not supplied with the switch. Use only a correctly rated power cord certified (as

appropriate) for the country of operation

2.2.1 Power Protection

• If possible, use a circuit dedicated to data processing equipment. Commercial electrical

contractors are familiar with wiring for data processing equipment and can help with the load

balancing of these circuits.

• Install surge protection. Be sure to use a surge protection device between the electricity

source and the RFS6000 Series RF Switch.

• Install an Uninterruptible Power Supply (UPS). A UPS provides continuous power during a

power outage. Some UPS devices have integral surge protection. UPS equipment requires

periodic maintenance to ensure reliability. A UPS of the proper capacity for the data processing

equipment must be purchased.

Width 440mm (17.32 in)

Height 44.45mm (1.75 in)

Depth 390.8mm (15.38 in)

Weight 6.35 Kg (14.0 lbs)

Operating Temperature 0°C - 40°C

Operating Humidity 5% - 85% RH, non-condensing

Operating Altitude 3 km (10000 ft)

LED Codes

3 LED Codes

The RFS6010 RF Switch has four vertically-stacked LEDs on its front panel. Each of the switch’s

Gigabit Ethernet ports have two status LEDs. These LEDs display two colors (green & amber), and

three lit states (solid, blinking, and off). The following tables decode the combinations of LED colors

and states for the System Status LEDs and the Gigabit Ethernet LEDs.

3.1 System Status LEDs

System Status 1

Fan status

Temperature status

System Status 2

LED Codes

3.1.1 Start Up / POST (Primary System or Redundant System)

3.1.2 Switch Status (Primary System)

3.1.3 Switch Status (Redundant System)

System Status 1 LED System Status 2 LED Event

Off Off Power off

Green Blinking Green Blinking Power On Self Test (POST) running

Green Solid Green Blinking POST succeeded (Operating System Loading)

Green Solid Off POST succeeded (Normal Operation)

Amber Blinking Off POST Failure

Alternating Green Blinking

& Amber Blinking

Alternating Green Blinking

& Amber Blinking

Boot Up Error: Device has an invalid checksum

NOTE During switch start up, the Temperature status LED will be lit Solid

Amber. This is normal behavior and does not indicate an error. At the

completion of start up the Temperature Status LED will switch to Solid

Green.

System Status 1 LED System Status 2 LED Event

Off Off Power off

Green Solid Off No Redundancy Feature Enabled

Green Solid Green Solid

Redundancy Feature Enabled

Actively Adopting Access Ports

Green Solid Amber Blinking

No License to adopt Access Ports

No Country Code configured on the switch

License and Country Code configured, but no

APs adopted

System Status 1 LED System Status 2 LED Event

Off Off Power off

Green Solid Off No Redundancy Feature Enabled

LED Codes

3.1.4 Fan LED

3.1.5 Temperature Status LED

Green Blinking Green Solid

Redundant System failed over and adopting

ports

Green Blinking

Alternating Green Blinking

& Amber Blinking

Redundant System not failed over.

Green Solid Amber Blinking

No License to adopt Access Ports

No Country Code configured on the switch

License and Country Code configured, but no

APs adopted

Fan LED Event

Off System Off / POST Start

Green Blinking POST in Process

Green Solid All System Fans Normal Operation

Amber Solid

Redundant Cooling Failure

System Operational

Amber Blinking

System Cooling Failure

System will be held in reset until the issue is

resolved

Temperature LED Event

Off System Off

Green Solid

Ambient Inlet Temperature is within specified

operating limit

Amber Solid

Ambient Inlet Temperature is near the maximum

operating temperature

During switch start up this LED will be lit Solid

Amber. This is normal behavior and does not

indicate an error.

System Status 1 LED System Status 2 LED Event

LED Codes

Amber Blinking

Ambient Inlet Temperature is above the

maximum specified operating temperature

System will be held in reset until the issue is

resolved

Temperature LED Event

LED Codes

3.2 RJ-45 Gigabit Ethernet LEDs

3.2.1 RJ-45 Port Speed LED

3.2.2 RJ-45 Port Status LED

Port Speed LED Event

Off 10 Mbps

Green Solid 100 Mbps

Amber Solid 1000 Mbps

Port Status LED Event

Off No Link or Administratively shut down

Green Solid Link present

Green Blinking Activity: Transmit and Receive

Port

speed

Port

activity

LED Codes

3.3 SFP Gigabit Ethernet LEDs

3.3.1 SFP Port Speed LED

3.3.2 SFP Port Status LED

Port Speed LED Event

Amber Solid 1000 Mbps

Port Status LED Event

Off No Link or Administratively shut down

Green Blinking Link present / Operational

Port speed

Port activity

LED Codes

3.4 Management Port LEDs

3.4.1 Out of Band Management Port Speed LED

3.5 Out of Band Management Port Status LED

Port Speed LED Event

Off 10 Mbps

Green Solid 100 Mbps

Port Status LED Event

Off No Link

Green Solid Link present

Green Blinking Activity: Transmit and Receive

Management

port

Port

speed

Port

activity

Hardware Setup

4 Hardware Setup

4.1 Cabling Information

The RFS6010 RF Switch has nine RJ-45 Gigabit Ethernet ports, one Gigabit SFP (fiber) port, one Out-

of-band management port and one Console connector. The above diagram shows each of those ports

and the cables or devices attached to them. The sections that follow describe detailed connection

and cabling information for each port. The switch also includes an ExpressCard slot for future

Out-of-band

management

Console

USB

ExpressCard

UPLINK

PoE enabled gigabit ethernet

ports 1, 3, 5, 7

Ports 2, 4, 6, 8

Gigabit Ethernet

RJ-45 connectors

with per-port LEDs

and PoE

USB

port

Out-of-band

management

port

ExpressCard

UPLINK

Console

connector

Hardware Setup

expansion. For software configuration, please see the Motorola RF Switch System Reference

available from the Motorola website.

4.2 Gigabit Ethernet on the RFS6010 RF Switch

The RFS6010 RF Switch has nine RJ-45 Gigabit Ethernet ports and one Gigabit SFP (fiber optic) port.

Using the RJ-45 ports requires connecting a Category-6 Ethernet cable to the port. Each of the eight

ports support Power-over-Ethernet. To use the Gigabit SFP port, first install the SFP Module (Motorola

Part Number: Fiber-3000-1S-WWR).

System LEDs:

System Status 1

System Status 2

Fan Status

Temperature Status

Gigabit Ethernet

RJ-45 connectors

with per-port LEDs

USB

port

Console

connector

Out-of-band

management

port

ExpressCard

UPLINK

Hardware Setup

4.2.1 Installing the Gigabit Ethernet SFP

1. Open the bail on the transceiver.

2. Insert the SFP transceiver into the corresponding port on the switch.

3. Once the SFP transceiver is properly seated in the port, close the bail to lock the transceiver in

place.

Open bail to insert or remove

SFP transceiver

Close bail to lock

SFP transceiver in place

Hardware Setup

4. Insert the fiber optic cables into the installed transceiver.

Hardware Setup

4.3 Connecting USB Devices

The RFS6010 RF Switch contains one USB port for connecting USB flash storage devices to the

switch. The switch can use the USB flash storage device for file and log transfers. Follow the setup

instructions below to connect the devices to the switch and then access those devices through the

Web UI or Command Line Interface.

1. Connect the USB flash drive to the USB .

2. Wait a few seconds for the drive to be recognized by the switch.

3. Follow the instructions in the Motorola RF Switch System Reference or CLI Reference for more

information on accessing USB storage devices from the switch for file transfers or firmware

updates.

NOTE The switch supports USB flash devices formatted with FAT or VFAT

(FAT32) filesystems only. If your flash storage device is formatted with

another filesystem you will need to format

USB

port

Hardware Setup

4.4 Rack Mount Instructions

To install the RFS6000 Series RF Switch in a rack:

1. The rack mounting brackets are installed at the factory. No additional steps are needed.

2. Attach the brackets to the rack using screws appropriate for your rack’s mounting holes.

Hardware Setup

4.5 RFS6000 Series RF Switch Console Port Setup

To add the RFS6000 Series RF Switch to the network and prepare it for initial configuration:

1. Using the supplied console cable (pictured below), connect the RFS6000 Series RF Switch serial

port to an RS-232 (DB-9) serial port on a separate computer (the “configuration computer”).

2. On the configuration computer, configure a terminal emulation application

(such as HyperTerminal) as follows:

Terminal Type VT-100

Port COM port

Terminal Settings

19200bps transfer rate

8 data bits

no parity

1 stop bit

no flow control

no hardware compression

Hardware Setup

4.6 Supplying Power to the RFS6000 Series RF Switch

1. Plug an approved AC power cord into the power connector at the back of the RFS6000 Series RF

Switch.

2. Plug the cord into a standard AC outlet with a voltage range of 100 to 240 VAC.

WARNING! An improper shutdown can render the RFS6000 Series RF Switch

inoperable such that it could require service by Motorola Support. Do not

remove AC power without first following the shutdown procedure. An

abrupt loss of power can corrupt the information stored on the device.

Rack mount

bracket

AC inlet

Hardware Setup

4.7 Verifying the Installation

View the LEDs on the front panel of the RFS6010 RF Switch to ensure the device is functioning

properly. The normal LED pattern follows this path:

• During the Power On Self Test (POST), the System 1 and System 2 LEDs both blink green.

• If the POST test fails, the System 1 LED will blink amber. If the POST test succeeds, the System

1 LED will be lit solid green.

• As the software is initialized, the System 2 LED will blink green.

• After the software has finished initializing, the System 1 LED will be lit solid green and the

bottom System 2 LED will be off. The RFS6000 Series RF Switch is ready to be configured, as

described in the Motorola RF Switch System Reference.

Other LED codes indicate the presence (or absence) of different standby states, or errors. A guide to

the RFS6000 Series RF Switch LEDs codes is provided in LED Codes.

Regulatory Information

5 Regulatory Information

This regulatory section applies to the RFS-6010. For more information refer to section 6, Part

Numbers, Support, and Sales.

All Motorola devices are designed to be compliant with rules and regulations in locations they are

sold and will be labeled as required.

Any changes or modifications to Motorola equipment, not expressly approved by Motorola, could void

the user’s authority to operate the equipment.

Country Selection

Select only the country in which you are using the device. Any other selection will make the operation

of this device illegal.

Laser Devices - Gigabit Ethernet SFP Option

Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice

No. 50, dated July 26, 2001.

EN60825-1:1994+ A1:2002 +A2:2001

IEC60825-1:1993+A1:1997+A2:2001

The laser classification is marked on the device.

Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The

following statement is required to comply with US and international regulations:

Radio Frequency Interference Requirements - FCC

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct the interference

at his own expense.

Radio Frequency Interference Requirements - Canada

This Class A digital apparatus complies with Canadian ICES-003.

Regulatory Information

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada..

Statement of Compliance

Motorola hereby declares that this device is in compliance with all the applicable Directives,

2004/108/EC, 2006/95/EC. A Declaration of Conformity may be obtained from

http://www2.symbol.com/doc/

Japan (VCCI) - Voluntary Control Council for Interference

Class A ITE

This is a Class A product based on the standard of the Voluntary Control Council for Interference by

Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio

interference may occur, in which case, the user may be required to take corrective actions.

Marking and European Economic Area (EEA)

CAUTION This is a class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

この装置は、情報処理装置等電波障害自主規制協議会（ＶＣＣＩ）の基準に基づくクラスA

情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがありま

す。この場合には使用者が適切な対策を講ずるよう要求されることがあります。

Regulatory Information

Waste Electrical and Electronic Equipment (WEEE)

English: For EU Customers: All products at the end of their life must be returned to Symbol for

recycling. For information on how to return product, please go to:

http://www.symbol.com/environmental_compliance.

Dansk: Til kunder i EU: Alle produkter skal returneres til Symbol til recirkulering, når de er

udtjent. Læs oplysningerne om returnering af produkter på: http://www.symbol.com/

environmental_compliance.

Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum

Recycling an Symbol zurückgesandt werden. Informationen zur Rücksendung von Produkten

finden Sie unter http://www.symbol.com/environmental_compliance.

Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise

eesmärgil Symbol'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun

aadressi: http://www.symbol.com/environmental_compliance.

Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Symbol

al final de su ciclo de vida para que sean reciclados. Si desea más información sobre cómo

devolver un producto, visite: http://www.symbol.com/environmental_compliance.

Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être

retournés à Symbol pour recyclage. Pour de plus amples informations sur le retour de produits,

consultez : http://www.symbol.com/environmental_compliance.

Regulatory Information

Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di

vita devono essere restituiti a Symbol al fine di consentirne il riciclaggio. Per informazioni sulle

modalità di restituzione, visitare il seguente sito Web: http://www.symbol.com/

environmental_compliance.

Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Symbol vállalathoz kell

eljuttatni újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos

tudnivalókért látogasson el a http://www.symbol.com/environmental_compliance weboldalra.

Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur

naar Symbol te worden teruggezonden voor recycling. Raadpleeg http://www.symbol.com/

environmental_compliance voor meer informatie over het terugzenden van producten.

Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à

Symbol para reciclagem. Para obter informações sobre como devolver o produto, visite: http:/

/www.symbol.com/environmental_compliance.

Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju

Symbol za reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.symbol.com/

environmental_compliance.

Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi

Symbol-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on

osoitteessa http://www.symbol.com/environmental_compliance.

Part Numbers, Support, and Sales

6 Part Numbers, Support, and Sales

Part Numbers

Motorola’s Enterprise Mobility Support Center

If you have a problem with your equipment, contact Enterprise Mobility support for your region.

Contact information is available by visiting http://www.motorola.com/customersupport

and after

selecting your region, click on the appropriate link under Support for Business

When contacting Enterprise Mobility support, please provide the following information:

• Serial number of the unit

• Model number or product name

• Software type and version number

Motorola responds to calls by email, telephone or fax within the time limits set forth in support

agreements. If you purchased your Enterprise Mobility business product from a Motorola business

partner, contact that business partner for support.

Customer Support Website

Motorola's Support Central Web site, accessed via the Symbol-branded products link under Support

for Business, provides information and online assistance including developer tools, software

downloads, product manuals and online repair requests.

Description Part Number

RFS6010 WITH ZERO PORTS RFS-6010-100R0-WR

RFS6010 WITH 8 PORTS RFS-6010-10010-WR

RFS6010 WITH 24 PORTS RFS-6010-10030-WR

RFS6010 WITH 48 PORTS RFS-6010-10060-WR

8 PORT-RFS6000 SERIES UPGRADE CERTIFICATE RFS-6010-UC-08-WR

Motorola, Inc. End-User License

Agreement

7 Motorola, Inc.

End-User License Agreement

BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE DESCRIBED IN THIS DOCUMENT, YOU OR THE ENTITY OR

COMPANY THAT YOU REPRESENT ("LICENSEE") ARE UNCONDITIONALLY CONSENTING TO BE BOUND BY AND ARE

BECOMING A PARTY TO THIS LICENSE AGREEMENT ("AGREEMENT"). LICENSEE'S USE OR CONTINUED USE OF THE

DOWNLOADED OR INSTALLED MATERIALS SHALL ALSO CONSTITUTE ASSENT TO THE TERMS OF THIS AGREEMENT. IF

LICENSEE DOES NOT UNCONDITIONALLY AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, DO NOT CONTINUTE THE

INSTALLATION PROCESS. IF THESE TERMS ARE CONSIDERED AN OFFER, ACCEPTANCE IS EXPRESSLY LIMITED TO AND

EXPRESSLY CONTINGENT UPON THESE TERMS. IF YOU ARE ACCEPTING THESE TERMS ON BEHALF OF A COMPANY,

ANOTHER PERSON OR ANY OTHER LEGAL ENTITY, YOU REPRESENT AND WARRANT THAT YOU HAVE THE AUTHORITY

TO BIND THAT COMPANY, PERSON OR ENTITY.

1 LICENSE GRANT. Subject to the terms of this Agreement, Motorola, Inc. and/or its subsidiaries ("Licensor") hereby

grants Licensee a limited, personal, non-sublicensable, non-transferable, nonexclusive license to use the software

that Licensee is about to download or install and the documentation that accompanies it (collectively, the "Software")

for Licensee's personal use in connection with hardware produced by Licensor and only in accordance with the

accompanying documentation. Licensee may download, install and use the Software only on a single computer.

Licensee may make one copy of the Software (excluding any documentation) for backup purposes, provided that

2 LICENSE RESTRICTIONS. Except as expressly permitted by this Agreement, Licensee shall not, nor permit anyone

else to, directly or indirectly: (i) copy (except for one backup copy), modify, distribute or create derivative works based

upon the Software; (ii) reverse engineer, disassemble, decompile or otherwise attempt to discover the source code or

structure, sequence and organization of the Software; or (iii) rent, lease, or use the Software for timesharing or

service bureau purposes, or otherwise use the Software for any commercial purpose/on behalf of any third party.

Licensee shall maintain and not remove or obscure any proprietary notices on the Software, and shall reproduce such

notices exactly on all permitted copies of the Software. All title, ownership rights, and intellectual property rights in

and to the Software, and any copies or portions thereof, shall remain in Licensor and its suppliers or licensors.

Licensee understands that Licensor may modify or discontinue offering the Software at any time. The Software is

protected by the copyright laws of the United States and international copyright treaties. The Software is licensed,

not sold. This Agreement does not give Licensee any rights not expressly granted herein.

3 INTELLECTUAL PROPERTY; CONTENT. All title and intellectual property rights in and to the Software (including but

not limited to any images, photographs, animations, video, audio, music, text and "applets" incorporated into the

Software), and any copies you are permitted to make herein are owned by Licensor or its suppliers. All title and

intellectual property rights in and to the content which may be accessed through use of the Software is the property

of the respective content owner and may be protected by applicable copyright or other intellectual property laws and

treaties. This EULA grants you no rights to use such content. As a condition to Licensee's use of the Software,

Licensee represents, warrants and covenants that Licensee will not use the Software: (i) to infringe the intellectual

property rights or proprietary rights, or rights of publicity or privacy, of any third party; (ii) to violate any applicable

law, statute, ordinance or regulation; (iii) to disseminate information or materials in any form or format ("Content")

that are harmful, threatening, abusive, harassing, tortuous, defamatory, vulgar, obscene, libelous, or otherwise

objectionable; or (iv) to disseminate any software viruses or any other computer code, files or programs that may

Motorola, Inc. End-User License

Agreement

interrupt, destroy or limit the functionality of any computer software or hardware or telecommunications equipment.

Licensee, not Licensor, remains solely responsible for all Content that Licensee uploads, posts, e-mails, transmits, or

otherwise disseminates using, or in connection with, the Software.

4 FEES; SUPPORT AND UPGRADES. Licensor may, at Licensor's sole option, provide support services related to the

Software ("Support Services"). Nothing in this Agreement grants Licensee any right to receive any Support Services.

Use of any Support Services provided is governed by the Licensor policies and programs described in the user

manual, in "online" documentation, and/or in other Licensor-provided materials or support agreements. Any

supplemental software code provided to you as part of any Support Services shall be considered part of the Software

and subject to the terms and conditions of this EULA. With respect to technical information you provide to Licensor as

part of any Support Services, Licensor may use such information for its business purposes, including for product

support and development. Licensor will not utilize such technical information in a form that personally identifies

Licensee.

5 TERMINATION. Either party may terminate this Agreement at any time, with or without cause, upon written notice.

Any termination of this Agreement shall also terminate the licenses granted hereunder. Upon termination of this

Agreement for any reason, Licensee shall return all copies of the Software to Licensor, or destroy and remove from all

computers, hard drives, networks, and other storage media all copies of the Software, and shall so certify to Licensor

that such actions have occurred. Sections 2-13 shall survive termination of this Agreement.

6 DISCLAIMER OF WARRANTIES. To the maximum extent permitted by applicable law, Licensor and its suppliers

provide the Software and any (if any) Support Services AS IS AND WITH ALL FAULTS, and hereby disclaim all

warranties and conditions, either express, implied or statutory, including, but not limited to, any (if any) implied

warranties or conditions of merchantability, of fitness for a particular purpose, of lack of viruses, of accuracy or

completeness of responses, of results, and of lack of negligence or lack of workmanlike effort, all with regard to the

Software, and the provision of or failure to provide Support Services. ALSO, THERE IS NO WARRANTY OR

CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, CORRESPONDENCE TO DESCRIPTION, OR NON-

INFRINGEMENT WITH REGARD TO THE SOFTWARE. THE ENTIRE RISK AS TO THE QUALITY OF OR ARISING OUT OF

USE OR PERFORMANCE OF THE SOFTWARE AND SUPPORT SERVICES, IF ANY, REMAINS WITH LICENSEE.

7 EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES. TO THE MAXIMUM EXTENT

PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL LICENSOR OR ITS SUPPLIERS BE LIABLE FOR ANY GENERAL,

SPECIAL, INCIDENTAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT

LIMITED TO, DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS

INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR FAILURE TO MEET ANY DUTY INCLUDING OF

GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS

WHATSOEVER) ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE,

THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, OR OTHERWISE UNDER OR IN CONNECTION

WITH ANY PROVISION OF THIS AGREEMENT, EVEN IN THE EVENT OF THE FAULT, TORT (INCLUDING NEGLIGENCE),

STRICT LIABILITY, BREACH OF CONTRACT OR BREACH OF WARRANTY OF LICENSOR OR ANY SUPPLIER, AND EVEN

IF LICENSOR OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

8 LIMITATION OF LIABILITY AND REMEDIES. Notwithstanding any damages that Licensee might incur for any reason

whatsoever (including, without limitation, all damages referenced above and all direct or general damages), the

entire liability of Licensor and any of its suppliers under any provision of this Agreement and Licensee's exclusive

remedy for all of the foregoing shall be limited to the greater of the amount actually paid by Licensee for the

Software or U.S.$5.00. The foregoing limitations, exclusions and disclaimers shall apply to the maximum extent

permitted by applicable law, even if any remedy fails its essential purpose.

Motorola, Inc. End-User License

Agreement

9 INDEMNITY. Licensee agrees that Licensor shall have no liability whatsoever for any use Licensee makes of the

Software. Licensee shall indemnify and hold harmless Licensor from any claims, damages, liabilities, costs and fees

(including reasonable attorney fees) arising from Licensee's use of the Software as well as from Licensee's failure to

comply with any term of this Agreement.

10 FAULT TOLERANCE. The Software is not fault-tolerant and is not designed, manufactured or intended for use or

resale in on-line control equipment in hazardous environments requiring fail-safe performance, such as, but not

limited to, the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, life

support machines, or weapons systems, in which the failure of the Software could lead directly or indirectly to death,

personal injury, or physical or environmental damage ("High Risk Activities"). Licensor and its suppliers specifically

disclaim any express or implied warranty of fitness for High Risk Activities.

11 U.S. GOVERNMENT LICENSE RIGHTS. Software provided to the U.S. Government pursuant to solicitations issued on

or after December 1, 1995 is provided with the commercial license rights and restrictions described elsewhere

herein. Software provided to the U.S. Government pursuant to solicitations issued prior to December 1, 1995 is

provided with "Restricted Rights" as provided for in FAR, 48 CFR 52.227-14 (JUNE 1987) or DFAR, 48 CFR 252.227-

7013 (OCT 1988), as applicable. The "Manufacturer" for purposes of these regulations is Motorola, Inc., One Motorola

Plaza, Holtsville, NY 11742.

12 EXPORT RESTRICTIONS. Licensee shall comply with all export laws and restrictions and regulations of the

Department of Commerce, the United States Department of Treasury Office of Foreign Assets Control ("OFAC"), or

other United States or foreign agency or authority, and Licensee shall not export, or allow the export or re-export of

the Software in violation of any such restrictions, laws or regulations. By downloading or using the Software,

Licensee agrees to the foregoing and represents and warrants that Licensee is not located in, under the control of, or

a national or resident of any restricted country.

13 MISCELLANEOUS. Licensee may not sublicense, assign, or transfer this Agreement, or its rights or obligations

hereunder, without the prior written consent of Licensor. Any attempt to otherwise sublicense, assign, or transfer any

of the rights, duties, or obligations hereunder is null and void. Licensor may assign this Agreement in its sole

discretion. In the event that any of the provisions of this Agreement shall be held by a court or other tribunal of

competent jurisdiction to be illegal, invalid or unenforceable, such provisions shall be limited or eliminated to the

minimum extent necessary so that this Agreement shall otherwise remain in full force and effect. No waiver or

modification of this Agreement will be binding upon a party unless made in writing and signed by a duly authorized

representative of such party and no failure or delay in enforcing any right will be deemed a waiver. This Agreement

shall be governed by the laws of the State of New York without regard to the conflicts of law provisions thereof. The

application the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded.

Unless waived by Licensor for a particular instance, any action or proceeding arising out of this Agreement must be

brought exclusively in the state or federal courts of New York and Licensee hereby consents to the jurisdiction of

such courts for any such action or proceeding. This Agreement supersedes all prior discussions and writings and

constitutes the entire agreement between the parties with respect to the subject matter hereof. The prevailing party

in any action arising out of this Agreement shall be entitled to costs and attorneys' fees.

Motorola, Inc. End-User License

Agreement

Motorola, Inc. End-User License

Agreement

Motorola, Inc. End-User License

Agreement

Motorola, Inc. End-User License

Agreement

MOTOROLA INC.

1303 E. ALGONQUIN ROAD

SCHAUMBURG, IL 60196

http://www.motorola.com

72-109855-01 Revision A

March 2008

Motorola RFS-6010-100R0-WR Installatie gids

Merk: Motorola

Model: RFS-6010-100R0-WR

Categorie: Netwerkschakelaars

Type: Installatie gids

PDF downloaden

rapport

in andere talen

English: Motorola RFS-6010-100R0-WR Installation guide

Motorola RFS-6010-100R0-WR Installatie gids

Motorola RFS-6010-100R0-WR Installatie gids

in andere talen

Gerelateerde papieren

Andere documenten