Zebra HS2100 Snelstartgids

Categorie
Koptelefoons
Type
Snelstartgids
Rugged Wired
Headset
Zebra reserves the right to make changes to any product
to improve reliability, function, or design. Zebra does not
assume any product liability arising out of, or in connection
with, the application or use of any product, circuit, or
application described herein. No license is granted, either
expressly or by implication, estoppel, or otherwise under
any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material,
method, or process in which Zebra products might be
used. An implied license exists only for equipment,
circuits, and subsystems contained in Zebra products.
Zebra Technologies Corporation, Lincolnshire, IL USA
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH
Corp., registered in many jurisdictions worldwide. All other
trademarks are the property of their respective owners.
© 2016 Symbol Technologies LLC, a subsidiary of Zebra
Technologies Corporation. All rights reserved.
HS2100
Quick Start Guide
MN-002758-02 Revision A — September 2016
Features
Over-the-Head (OTH)
Behind-the-Neck (BTN)
Position the Boom
Do not rotate the boom beyond the stop point.
* Applies to OTH model. The BTN model has only
left side boom placement.
Connect the Audio Cable
Insert the audio cable into either the top or bottom
audio cable port, depending on right or left
placement of the boom.
Position the keyed cable edge with the audio cable
port slot.
Adjust the OTH Headband
The headband can be squeezed for a tighter fit to
the head and clicks as it is positioned into place.
When adjusting the headband,
Position the ear pad in the center of the ear.
Position the T-Bar above the ear, half way
between the top of the ear and the top of the
head.
Adjust the Microphone
Position the microphone icon so that it is facing
your mouth.
Adjust the Microphone
Boom
Place the microphone two finger’s width away from
the corner of your mouth, so it is slightly to one
side.
Mute the Microphone
Place the microphone boom in the upright position.
Clip onto Clothes
To ensure that the headset cable does not interfere
with movement, clip the cable to clothing, using the
provided clip.
Maintenance
Replace T-Bar
* Applies to OTH model.
Replace Headband
Disassemble the headset to replace the headband.
Replace Ear Pad
Firmly grip and pull the ear pad and inner casing.
Align and snap the new ear pad into position.
Replace Windscreen
NOTE This guide applies to both the
OTH and BTN headband
models, unless otherwise
noted.
Adjustable
Headband
Microphone with Windscreen
Disassembly Knob
Flexible Microphone Boom
T-Bar
Foam Ear Pad
Audio
Cable
Port
Cover
Microphone with Windscreen
Flexible Microphone Boom
Disassembly Knob
Audio Cable
Port Cover
Headband
Left Placement
Foam Ear Pad
Right Side Boom
Placement
Left Side Boom
Placement
1
2
Microphone Icon
NOTE The Mute on Boom feature is
dependent on device support.
1
2
Parts and Accessories Regulatory Information
This device is approved under Zebra Technologies
Corporation.
This guide applies to Model Number HS2100.
All Zebra devices are designed to be compliant
with the rules and regulations in the locations they
are sold and will be labeled as required.
Local language translations are available at the
following website: www.zebra.com/support
.
Any changes or modifications to Zebra equipment
not expressly approved by Zebra could void the
user's authority to operate the equipment.
Radio Frequency
Interference Requirements
- FCC
Note: This equipment has been
tested and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
Radio Frequency
Interference Requirements
- Canada
CAN ICES-3 (B)/NMB-3(B)
Marking and
European Economic
Area (EEA)
Statement of Compliance
Zebra hereby declares that this device is in
compliance with all applicable Directives, 2014/30/
EU, 2014/35/EU and 2011/65/EU.
The full text of the EU Declaration of Conformity is
available at the following internet address: http://
www.zebra.com/doc.
Waste Electrical and
Electronic
Equipment (WEEE)
English: For EU Customers: All products at the
end of their life must be returned to Zebra for
recycling. For information on how to return product,
please go to: http://www.zebra.com/weee.
Français: Clients de l'Union Européenne: Tous les
produits en fin de cycle de vie doivent être
retournés à Zebra pour recyclage. Pour de plus
amples informations sur le retour de produits,
consultez: http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos
los productos deberán entregarse a Zebra al final
de su ciclo de vida para que sean reciclados. Si
desea más información sobre cómo devolver un
producto, visite: http://www.zebra.com/weee.
Bulgarish: За клиенти от ЕС: След края на
полезния им живот всички продукти трябва да
се връщат на Zebra за рециклиране. За
информация относно връщането на продукти,
моля отидете на адрес: http://www.zebra.com/
weee.
Deutsch: Für Kunden innerhalb der EU: Alle
Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Zebra zurückgesandt werden.
Informationen zur Rücksendung von Produkten
finden Sie unter http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che
sono giunti al termine del rispettivo ciclo di vita
devono essere restituiti a Zebra al fine di
consentirne il riciclaggio. Per informazioni sulle
modalità di restituzione, visitare il seguente sito
Web: http://www.zebra.com/weee.
Português: Para clientes da UE: todos os
produtos no fim de vida devem ser devolvidos à
Zebra para reciclagem. Para obter informações
sobre como devolver o produto, visite: http://
www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten
dienen aan het einde van hun levensduur naar
Zebra te worden teruggezonden voor recycling.
Raadpleeg http://www.zebra.com/weee voor meer
informatie over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej:
Produkty wycofane z eksploatacji nale
ży zwrócić
do firmy Zebra w celu ich utylizacji. Informacje na
temat zwrotu produktów znajdują się na stronie
internetowej http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je
nutné po skonèení jejich životnosti vrátit
spoleènosti Zebra k recyklaci. Informace o
zpùsobu vrácení produktu najdete na webové
stránce: http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea
lõppedes tagastada taaskasutamise eesmärgil
Zebra'ile. Lisainformatsiooni saamiseks toote
tagastamise kohta külastage palun aadressi: http://
www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden
tönkrement terméket a Zebra vállalathoz kell
eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a http://
www.zebra.com/weee weboldalra.
Slovenski: Za kupce v EU: vsi izdelki se morajo po
poteku življenjske dobe vrniti podjetju Zebra za
reciklažo. Za informacije o vračilu izdelka obiščite:
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som
uppnått sin livslängd måste returneras till Zebra för
återvinning. Information om hur du returnerar
produkten finns på http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella:
Kaikki tuotteet on palautettava kierrätettäväksi
Zebra-yhtiöön, kun tuotetta ei enää käytetä.
Lisätietoja tuotteen palauttamisesta on osoitteessa
http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal
returneres til Zebra til recirkulering, når de er
udtjent. Læs oplysningerne om returnering af
produkter på: http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα
προϊόντα, στο τέλος της διάρκειας ζωής τους,
πρέπει να επιστρέφονται στην Zebra για
ανακύκλωση. Για περισσότερες πληροφορίες
σχετικά
με την επιστροφή ενός προϊόντος,
επισκεφθείτε τη διεύθυνση http://www.zebra.com/
weee στο ∆ιαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu
waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu
rritornati għand Zebra għar-riċiklaġġ. Għal aktar
tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate
produsele, la sfârşitul duratei lor de funcţionare,
trebuie returnate la Zebra pentru reciclare. Pentru
informaţii despre returnarea produsului, accesaţi:
http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky
výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Zebra na recykláciu. Bližšie
informácie o vrátení výrobkov nájdete na: http://
www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus
jų eksploatacijos laikui, turi būti grąžinti utilizuoti į
kompaniją „Zebra“. Daugiau informacijos, kaip
grą
žinti gaminį, rasite: http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to
kalpošanas mūža beigām ir jānogādā atpakaļ
Zebra otrreizējai pārstrādei. Lai iegūtu informāciju
par produktu nogādāšanu Zebra, lūdzu, skatiet:
http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan
tüm ürünler geri dönüştürme için Zebra'ya iade
edilmelidir. Ürünlerin nasıl iade edileceği hakkında
bilgi için lütfen şu adresi ziyaret edin: http://
www.zebra.com/weee.
TURKISH WEEE Statement of
Compliance
EEE Yönetmeliğine Uygundur
Warranty
For the complete Zebra hardware product warranty
statement, go to: http://www.zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to
operate in your facility’s network and run your
applications.
If you have a problem running your unit or using
your equipment, contact your facility’s Technical or
Systems Support. If there is a problem with the
equipment, they will contact the Zebra Global
Customer Support at: http://www.zebra.com/
support.
For the latest version of this guide go to: http://
www.zebra.com/support.
Part Number Description
HS2100-OTH HS2100 Rugged Wired
Headset (Over-the-
Head headband)
HS2100-BTN-L HS2100 Rugged Wired
Headset (Behind-the-
Neck Headband Left)
HS2100-BOOM-01 HS2100 Boom Module
HSX100-BTN-L-HB-01 HSX100 BTN Headband
Left Module
HSX100-OTH-HB-01 HSX100 OTH
Headband Module
CBL-HS2100-3MS1-01 3.5mm Jack 43” (1.1M)
Standard Cable
Assembly (Rogue &
TC7x)
CBL-HS2100-12S1-01 12 Pins 43” (1.1M)
Standard Cable
Assembly
CBL-HS2100-QDC1-01 QD Cable for HS2100
Headset
KT-HSX100-OTH1-10 Over-the-Head
Headband Pack of 10
KT-HSX100-BTNL1-10 Behind-the-Neck
Headband Left Pack of
10
KT-HSX100-EPF1-20 HSX100 Headset Foam
Ear Pad Pack of 20
KT-HSX100-EPL1-20 HSX100 Headset
Leatherette Ear Pad
Pack of 20
KT-HSX100-MWS1-50 HSX100 Headset Series
Microphone Windscreen
Pack of 50
KT-HS2100-CC1-20 HS Headset Series
Microphone Cord Clip
Pack of 20
KT-HSX100-TBP1-20 T-Bar with Pad Pack of
20
  • Page 1 1
  • Page 2 2

Zebra HS2100 Snelstartgids

Categorie
Koptelefoons
Type
Snelstartgids