Yamaha YST-M101 Handleiding

Yamaha
Merk
Yamaha
Model
YST-M101
Type
Handleiding
I
VOLUME
Active Servo
Technology
POWERD MULTIMEDIA SPEAKERS
YST
-
M101
POWERED MULTIMEDIA SPEAKERS
YST-M101
OWNER’S MANUAL
MODE D’EMPLOI
Active Servo
Technology
U C A
II
• Explanation of Graphical Symbols
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
SAFETY INSTRUCTIONS
1 Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2 Retain Instructions – The safety and operating
instructions should be retained for future reference.
3 Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and other
instructions should be followed.
5 Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a
swimming pool, etc.
6 Carts and Stands – The unit should be used only with
a cart or stand that is recommended by the
manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause
the unit and cart combination to overturn.
7 Wall or Ceiling Mounting – The unit should be mounted
to a wall or ceiling only as recommended by the
manufacturer.
8 Ventilation – The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be
situated on a bed, sofa, rug, or similar surface, that
may block the ventilation openings; or placed in a built-
in installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
9 Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances
that produce heat.
10 Power Sources – The unit should be connected to a
power supply only of the type described in the
operating instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into
the inside of the unit.
15 Damage Requiring Service – The unit should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet
damaged.
16 Servicing – The user should not attempt to service the
unit beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
17 Power Lines – An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization – Precautions should be
taken so that the grounding or polarization is not
defeated.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
IMPORTANT
Please record the serial number of this system in the
space below.
Model:
Serial No.:
The serial number is located on the rear of the main
unit.
Retain this Owner’s Manual in a safe place for future
reference.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
III
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out
of your equipment by playing it at a safe level. One that lets
the sound come through loud and clear without annoying
blaring or distortion – and, most importantly, without
affecting your sensitive hearing.
Since hearing damage from loud sounds is
often undetectable until it is too late, YAMAHA
and the Electronic Industries Association’s
Consumer Electronics Group recommend you
to avoid prolonged exposure from excessive
volume levels.
For Canadian Customers
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE : DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the
USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies
and, if not installed and used according to the
instructions found in the users manual, may cause
interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this
product is found to be the source of interference, which
can be determined by turning the unit “OFF” and “ON”,
please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Corporation of
America 6600 Orangethorpe Ave. Buena Park, CA90622,
U.S.A.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
IV
To AC receptacle
Vers une prise du réceptacle CA
PA-M30:
3.5 mm stereo mini plug
Fiches mini-jack stéréo 3,5 mm
Left speaker
Enceinte gauche
Right speaker
Enceinte droite
Rear
Arrière
1
2
Rear
Arrière
AC adaptor
Adaptateur CA
TO
LEFT
SPEAKER
DC IN 12V
INPUT
Active Servo
Technology
POWERD MULTIMEDIA SPEAKERS
YST
-
M101
VOLUME
Active Servo
Technology
POWERD MULTIMEDIA SPEAKERS
YST
-
M101
VOLUME
TO
LEFT
SPEAKER
DC IN 12V
INPUT
1 2 3
VOLUME
4 5 6
English
E-1
Please read the following operating precautions before use.
YAMAHA will not be held responsible for any damage
and/or injury caused by not following the cautions below.
● When you disconnect the AC adaptor from the AC
receptacle, hold the adaptor itself and not the cord.
● If you plan not to use YST-M101 for a while, disconnect
the AC adaptor from the AC receptacle.
● Always disconnect the AC adaptor from the AC
receptacle before making any connections.
● YST-M101 does not contain any user serviceable parts.
Refer all servicing to your Yamaha dealer.
● Never open the cabinet. If a foreign object drops into
the set, contact your dealer and stop using YST-M101.
Otherwise, you may cause a fire.
● The voltage to be used must be the same as that
specified on the rear panel. Using YST-M101 with a
higher voltage than specified is dangerous and may
cause a fire and/or electric shock.
● Do not expose YST-M101 to extreme temperatures,
direct sunlight, excessive dust, humidity, or vibration.
● Position YST-M101 on a level, stable surface. Do not
drop, apply excessive force to their controls, or put heavy
items on top of them.
● Do not place small metallic objects on YST-M101.
Otherwise, the object may fall, possibly causing an
injury.
● Do not place the following objects on YST-M101:
Glass, china, etc.
If glass etc. falls by vibrations and breaks, it may cause
personal injury.
A burning candle etc.
If the candle falls by vibrations, it may cause fire and
personal injury.
A vessel with water in it
If the vessel falls by vibrations and water spills, it may
cause damage to YST-M101, and/or you may get an
electric shock.
● Do not place YST-M101 where foreign objects such as
water drips might fall. It might cause a fire, damage to
YST-M101, and/or personal injury.
● To protect YST-M101, avoid microphone feedback,
continuous and excessive output from electronic musical
instruments, and excessive signal distortion.
● If YST-M101 is located close to fluorescent or neon
lights, a slight hum may be heard. In this case, relocate
YST-M101 away from the light.
● Although YST-M101 is magnetically shielded, keep
floppy disks and tapes away from it.
● Avoid sources of hum (transformers, motors). To prevent
fire or electrical shock, do not expose to rain or water.
● When using a humidifier, be sure to avoid condensation
inside YST-M101 by allowing enough spaces around
YST-M101 or avoiding excess humidification.
Condensation might cause a fire, damage to YST-M101,
and/or electric shock.
● Do not use force on switches, knobs, or cables. When
you move YST-M101, first turn off the power, then
disconnect the AC adaptor from the AC receptacle and
the cables from the connected devices.
● Always set the POWER/VOLUME control fully to the left
(in the standby mode) before starting to play the audio
source: turn the control gradually after the play has
started.
● Be sure to use the AC adaptor supplied with YST-
M101. Otherwise, you might cause a fire or damage
to YST-M101.
Standby mode
When YST-M101 is turned off by turning the POWER/
VOLUME control, YST-M101 consumes a small amount
of power. This state is called the standby mode. The
power supply is completely cut off from the AC line only
when the AC adaptor is disconnected.
YST-M101 features a magnetically shielded design, but
there is still a chance that placing it too close to a TV or
a computer monitor might impair picture color. Should
this happen, move YST-M101 away from the TV or the
computer monitor.
Thank you for selecting Yamaha’s YST-M101 Powered Multimedia Speakers. Yamaha Active Servo Technology offers
exceptionally high performance.
CAUTIONS
(See figure 1 on page IV.)
Make connections between the speakers and other
equipment as shown in the figure.
Caution: Plug in the right speaker and other
equipment after all connections are
completed.
CONNECTIONS
E-2
Problem
No sound comes from the
speakers.
Sound is distorted.
Noise.
What to Do
Insert the AC adaptor firmly into the AC
receptacle.
Turn on the power by turning the
POWER/VOLUME control clockwise.
(The power indicator lights up.)
Make the connections again.
Turn the POWER/VOLUME control
clockwise to increase the volume.
Turn up the volume on the connected
component.
Disconnect the headphones.
Turn down the volume on the connected
component.
Make the connections again.
Cause
The AC adaptor is not properly plugged
into the AC receptacle.
The POWER/VOLUME control is set to
off.
Connections are faulty or incomplete.
The volume setting is low.
The level of the signal being inputted is
too low.
Headphones are connected.
The level of the signal being inputted is
too high.
Connections are faulty or incomplete.
Refer to the chart below when the speakers do not function properly. If the problem you are experiencing is not listed below or
if the instructions given below do not help, disconnect the AC adaptor and contact your authorized YAMAHA dealer or service
center.
Type .................................Yamaha Active Servo Technology
Driver..... 6.5 cm (2-9/16”) cone, magnetically shielded type
Amplifier output
Speaker .................. 3 W + 3 W (1 kHz, 4Ω at T.H.D.=10%)
Headphones ............... 0.45 V (1 kHz, 30Ω, Input: 200 mV)
Input sensitivity........................200 mV (1 kHz, 4Ω at 3 W)
Input impedance ....................................................... 25 kΩ
Frequency response ................................. 80 Hz to 20 kHz
Power supply (AC adaptor)
U.S.A. and Canada models ......................AC 120 V, 60 Hz
U.K. and Europe models...........................AC 230 V, 50 Hz
Australia model .........................................AC 240 V, 50 Hz
Dimensions (W X H X D)
.............................76 (3”) 3 215 (8-1/2”) 3 136 (5-3/8”) mm
Weight
Right speaker ............................................ 0.7 kg (1.5 lbs.)
Left speaker............................................... 0.6 kg (1.3 lbs.)
Accessory ...................................................AC adaptor 3 1
* Specifications are subject to change without notice.
(See figure 2 on page IV.)
1 DC IN connector
Connect the supplied AC adaptor to this connector.
2 INPUT
Connect this 3.5 mm mini plug connector cable to the
output terminal of a CD player, a personal computer,
etc. which input an audio source to YST-M101.
3 TO LEFT SPEAKER
Connect the RCA pin plug cable from the left speaker
to this connector.
4 Power indicator
Lights up when the power of YST-M101 is on.
5 POWER/VOLUME control
Slowly turn the control clockwise. When it clicks, the
power of YST-M101 turns on and the power indicator
(4) lights up.
Turn the control clockwise furthermore to increase the
volume level of the entire speaker system and
counterclockwise to decrease the level.
To turn YST-M101 into the standby mode, turn the
control fully counterclockwise until it clicks. The power
indicator (4) will also go off.
6 Headphones jack
When you listen with headphones, connect the
headphones to the headphones jack. No sound is
outputted from the speakers when headphones are
connected to this jack.
CONTROLS & CONNECTORS SPECIFICATIONS
TROUBLESHOOTING
N-1
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VASTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
V664780
Printed in China
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Yamaha YST-M101 Handleiding

Yamaha
Merk
Yamaha
Model
YST-M101
Type
Handleiding
Download PDF
rapport

in andere talen

Gerelateerde artikelen