Yamaha YDP-161 de handleiding

Categorie
Muziekinstrumenten
Type
de handleiding
DIC565
YDP-161
YDP-141
For information on assembling the keyboard stand, refer to the instructions at the end of this manual.
IMPORTANT — Check your power supply — (YDP-161)
Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom
panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the
power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at
240V when the unit is initially shipped.
To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears
next to the pointer on the panel.
Owner's Manual
EN
U.R.G., Pro Audio & Digital Musical Instrument Division,Yamaha Corporation
© 2010 Yamaha Corporation
WS59960 003APGR-02B0
Pr
inted in Indonesia
For details of products, please contact your nearest Yamaha
representative or the authorized distributor listed below.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou
au distributeur le plus proche de vous figurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
Para detalles sobre productos, contacte su tienda Yamaha más
cercana o el distribuidor autorizado que se lista debajo.
HEAD OFFICE
Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650
Tel: +81-53-460-3273
EKB50
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Scarborough, Ontario,
M1S 3R1, Canada
Tel: 416-298-1311
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620,
U.S.A.
Tel: 714-522-9011
MEXICO
Yamaha de México S.A. de C.V.
Calz. Javier Rojo Gómez #1149,
Col. Guadalupe del Moral
C.P. 09300, México, D.F., México
Tel: 55-5804-0600
BRAZIL
Yamaha Musical do Brasil Ltda.
Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi,
CEP 04534-013 Sao Paulo, SP. BRAZIL
Tel: 011-3704-1377
ARGENTINA
Yamaha Music Latin America, S.A.
Sucursal de Argentina
Olga Cossettini 1553, Piso 4 Norte
Madero Este-C1107CEK
Buenos Aires, Argentina
Tel: 011-4119-7000
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Torre Banco General, Piso 7, Urbanización Marbella,
Calle 47 y Aquilino de la Guardia,
Ciudad de Panamá, Panamá
Tel: +507-269-5311
THE UNITED KINGDOM/IRELAND
Yamaha Music U.K. Ltd.
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, England
Tel: 01908-366700
GERMANY
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Europe GmbH
Branch Switzerland in Zürich
Seefeldstrasse 94, 8008 Zürich, Switzerland
Tel: 01-383 3990
AUSTRIA
Yamaha Music Europe GmbH Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-60203900
CZECH REPUBLIC/SLOVAKIA/
HUNGARY/SLOVENIA
Yamaha Music Europe GmbH Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-602039025
POLAND/LITHUANIA/LATVIA/ESTONIA
Yamaha Music Europe GmbH
Branch Sp.z o.o. Oddzial w Polsce
ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland
Tel: 022-868-07-57
THE NETHERLANDS/
BELGIUM/LUXEMBOURG
Yamaha Music Europe Branch Benelux
Clarissenhof 5-b, 4133 AB Vianen, The Netherlands
Tel: 0347-358 040
FRANCE
Yamaha Musique France
BP 70-77312 Marne-la-Vallée Cedex 2, France
Tel: 01-64-61-4000
ITALY
Yamaha Musica Italia S.P.A.
Viale Italia 88, 20020 Lainate (Milano), Italy
Tel: 02-935-771
SPAIN/PORTUGAL
Yamaha Música Ibérica, S.A.
Ctra. de la Coruna km. 17, 200, 28230
Las Rozas (Madrid), Spain
Tel: 91-639-8888
GREECE
Philippos Nakas S.A. The Music House
147 Skiathou Street, 112-55 Athens, Greece
Tel: 01-228 2160
SWEDEN
Yamaha Scandinavia AB
J. A. Wettergrens Gata 1, Box 30053
S-400 43 Göteborg, Sweden
Tel: 031 89 34 00
DENMARK
YS Copenhagen Liaison Office
Generatorvej 6A, DK-2730 Herlev, Denmark
Tel: 44 92 49 00
FINLAND
F-Musiikki Oy
Kluuvikatu 6, P.O. Box 260,
SF-00101 Helsinki, Finland
Tel: 09 618511
NORWAY
Norsk filial av Yamaha Scandinavia AB
Grini Næringspark 1, N-1345 Østerås, Norway
Tel: 67 16 77 70
ICELAND
Skifan HF
Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland
Tel: 525 5000
RUSSIA
Yamaha Music (Russia)
Office 4015, entrance 2, 21/5 Kuznetskii
Most street, Moscow, 107996, Russia
Tel: 495 626 0660
OTHER EUROPEAN COUNTRIES
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
TURKEY/CYPRUS
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
OTHER COUNTRIES
Yamaha Music Gulf FZE
LOB 16-513, P.O.Box 17328, Jubel Ali,
Dubai, United Arab Emirates
Tel: +971-4-881-5868
THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd.
2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,
Shanghai, China
Tel: 021-6247-2211
HONG KONG
Tom Lee Music Co., Ltd.
11/F., Silvercord Tower 1, 30 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel: 2737-7688
INDIA
Yamaha Music India Pvt. Ltd.
5F Ambience Corporate Tower Ambience Mall Complex
Ambience Island, NH-8, Gurgaon-122001, Haryana, India
Tel: 0124-466-5551
INDONESIA
PT. Yamaha Music Indonesia (Distributor)
PT. Nusantik
Gedung Yamaha Music Center, Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: 21-520-2577
KOREA
Yamaha Music Korea Ltd.
8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,
Kangnam-Gu, Seoul, Korea
Tel: 080-004-0022
MALAYSIA
Yamaha Music Malaysia, Sdn., Bhd.
Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,
Petaling Jaya, Selangor, Malaysia
Tel: 3-78030900
PHILIPPINES
Yupangco Music Corporation
339 Gil J. Puyat Avenue, P.O. Box 885 MCPO,
Makati, Metro Manila, Philippines
Tel: 819-7551
SINGAPORE
Yamaha Music Asia Pte., Ltd.
#03-11 A-Z Building
140 Paya Lebor Road, Singapore 409015
Tel: 747-4374
TAIWAN
Yamaha KHS Music Co., Ltd.
3F, #6, Sec.2, Nan Jing E. Rd. Taipei.
Taiwan 104, R.O.C.
Tel: 02-2511-8688
THAILAND
Siam Music Yamaha Co., Ltd.
4, 6, 15 and 16th floor, Siam Motors Building,
891/1 Rama 1 Road, Wangmai,
Pathumwan, Bangkok 10330, Thailand
Tel: 02-215-2626
OTHER ASIAN COUNTRIES
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2317
AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 99 Queensbridge Street, Southbank,
Victoria 3006, Australia
Tel: 3-9693-5111
NEW ZEALAND
Music Works LTD
P.O.BOX 6246 Wellesley, Auckland 4680,
New Zealand
Tel: 9-634-0099
COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
NORTH AMERICA
CENTRAL & SOUTH AMERICA
EUR
OPE
AFRICA
MIDDLE EAS
T
ASIA
OCEAN
IA
2
ENGLISH
3
ENGLISH
YDP-161/141 Owner’s Manual
4
ENGLISH
(7)-1 1/2
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following
Do not place the power cord near heat sources such as heaters or
radiators, and do not excessively bend or otherwise damage the cord,
place heavy objects on it, or place it in a position where anyone could
walk on, trip over, or roll anything over it.
Only use the voltage specified as correct for the instrument. The required
voltage is printed on the name plate of the instrument.
(YDP-141)Use the specified adaptor (page 38) only. Using the wrong
adaptor can result in damage to the instrument or overheating.
(YDP-161)Use only the supplied power cord/plug.
Check the electric plug periodically and remove any dirt or dust which
may have accumulated on it.
This instrument contains no user-serviceable parts. Do not open the
instrument or attempt to disassemble or modify the internal components
in any way. If it should appear to be malfunctioning, discontinue use
immediately and have it inspected by qualified Yamaha service
personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill
into any openings. If any liquid such as water seeps into the instrument,
turn off the power immediately and unplug the power cord from the AC
outlet. Then have the instrument inspected by qualified Yamaha service
personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
When one of the following problems occur, immediately turn off the
power switch and disconnect the electric plug from the outlet. Then have
the device inspected by Yamaha service personnel.
The power cord or plug becomes frayed or damaged.
It emits unusual smells or smoke.
Some object has been dropped into the instrument.
There is a sudden loss of sound during use of the instrument.
Power supply/Power cord/AC power adaptor
Do not open
Water warning
Fire warning
If you notice any abnormality
YDP-161/141 Owner’s Manual
5
ENGLISH
(7)-1 2/2
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-
connector. Doing so can result in lower sound quality, or possibly cause
overheating in the outlet.
When removing the electric plug from the instrument or an outlet, always
hold the plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be
used for extended periods of time, or during electrical storms.
Read carefully the attached documentation explaining the assembly
process. Failure to assemble the instrument in the proper sequence might
result in damage to the instrument or even injury.
Do not place the instrument in an unstable position where it might
accidentally fall over.
Before moving the instrument, remove all connected cables.
When setting up the product, make sure that the AC outlet you are using
is easily accessible. If some trouble or malfunction occurs, immediately
turn off the power switch and disconnect the plug from the outlet. Even
when the power switch is turned off, electricity is still flowing to the
product at the minimum level. When you are not using the product for a
long time, make sure to unplug the power cord from the wall AC outlet.
Before connecting the instrument to other electronic components, turn off
the power for all components. Before turning the power on or off for all
components, set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels and
gradually raise the volume controls while playing the instrument to set
the desired listening level.
Do not insert a finger or hand in any gaps on the key cover or instrument.
Also take care that the key cover does not pinch your finger.
Never insert or drop paper, metallic, or other objects into the gaps on the
key cover, panel or keyboard.
Do not rest your weight on, or place heavy objects on the instrument, and
do not use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time
at a high or uncomfortable volume level, since this can cause permanent
hearing loss. If you experience any hearing loss or ringing in the ears,
consult a physician.
Do not place the bench in an unstable position where it might
accidentally fall over.
Do not play carelessly with or stand on the bench. Using it as a tool or
stepladder or for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
If the bench screws become loose due to extensive long-term use, tighten
them periodically using the included tool.
Always turn the power off when the instrument is not in use.
YDP-141
Even when the power switch is in the “Standby” position, electricity is still flowing to the instrument at the minimum level. When you are not using the
instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
YDP-161/141
(bottom)
Power supply/Power cord/AC power adaptor
Assembly
Location
Connections
Handling caution
Using the bench (If included)
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
The serial number of this product may be found on the
bottom of the unit. You should note this serial number in
the space provided below and retain this manual as a
permanent record of your purchase to aid identification
in the event of theft.
Model No.
Serial No.
6
YDP-161/141 Owner’s Manual
ENGLISH
About this Owner’s Manual
Thank you for purchasing the Yamaha Digital Piano! We recommend that you read this manual carefully so that you can
take full advantage of the advanced and convenient functions of your new digital piano.
We also recommend that you keep this manual in a safe, convenient place for future reference.
The following instructional materials come with your digital piano
Included Documents
Owner’s Manual (this book)
Quick Operation Guide (separate sheet)
This Guide explains detailed operation of the functions assigned to the buttons and keyboard.
Online Materials (Downloadable from the web)
The following instructional materials are available for downloading from the Yamaha Manual Library. Access the
Yamaha Manual Library, then enter your model name (YDP-161, for example) in the Model Name area to search the
manuals.
Data List
The Data List contains MIDI related information, such as the MIDI Data Format and MIDI Implementation chart.
MIDI Basics (only in English, French, German and Spanish)
If you want to know more about MIDI and how to use it, refer to this introductory book.
NOTICE
To avoid the possibility of damage to the product, data or other property, follow the notices below.
Handling and Maintenance
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices.
Otherwise, the instrument, TV, or radio may generate noise.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use paint thinners, solvents, cleaning fluids,
or chemical-impregnated wiping cloths.
During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the
instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off
immediately with a soft cloth.
Saving data
Saved data may be lost due to malfunction or incorrect operation. Save important data to external device such as a
computer.
Information
About copyrights
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly
prohibited except for your personal use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with
respect to which it has license to use others' copyrights. Such copyrighted materials include, without limitation, all
computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of
such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has
legal consequences. DON'T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
About functions/data bundled with the instrument
Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
About this manual
The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from
those on your instrument.
Windows is a registered trademark of Microsoft(R) Corporation in the United States and other countries.
The company names and product names in this manual are the trademarks or registered trademarks of their respective
companies.
Yamaha Manual Library http://www.yamaha.co.jp/manual/
YDP-161/141 Owner’s Manual
7
ENGLISH
Table of Contents
Introduction
About this Owner’s Manual.................... 6
Table of Contents ................................... 7
Features ..................................................8
Accessories..............................................8
Panel Controls and Terminals ................ 9
Before Using the Digital Piano............. 10
Key Cover.................................................................... 10
Music Rest ................................................................... 10
Turning the Power On................................................. 11
Setting the Volume...................................................... 12
Using Headphones ...................................................... 12
Reference
Listening to the Demo Songs............... 13
Listening to 50 Piano Preset Songs...... 14
Listening to Songs Loaded
from the Computer .............................. 15
Selecting & Playing Voices ................... 16
Selecting Voices........................................................... 16
Using the Pedals .......................................................... 17
Damper Resonance (YDP-161)..................................... 17
Adding Variations to the Sound – Reverb ..................... 18
Layering Two Voices (Dual mode)................................ 19
Transposition ............................................................... 20
Fine-tuning the Pitch ................................................... 20
Using the Metronome ................................................. 21
Adjusting the Keyboard Touch (Touch Sensitivity)........ 22
Recording Your Performance .............. 23
Recording Your Performance ....................................... 23
Playing Back Recorded Performance Data.................... 25
Erasing Recorded Performance Data ............................ 25
Listening to a Specified Part /
Practicing a One-Hand Part ................. 26
Connecting MIDI Instruments............. 27
About MIDI ................................................................. 27
MIDI’s Capability......................................................... 27
Connecting the Digital Piano to a Computer............... 28
Transmitting Song Data between the Computer
and the Digital Piano................................................... 28
Backing up Data and Initializing the Settings............... 29
MIDI Functions..................................... 30
MIDI Transmit/Receive Channel Selection.................... 30
Local Control ON/OFF................................................. 30
Program Change ON/OFF........................................... 31
Control Change ON/OFF ............................................ 31
Troubleshooting................................... 32
Options................................................. 32
Keyboard Stand Assembly ................... 33
INDEX................................................... 37
Appendix
Specifications ....................................... 38
8
YDP-161/141 Owner’s Manual
ENGLISH
Features
Accessories
*1 The PRODUCT ID on the sheet will be needed when you fill out the User Registration form.
*2 Included or optional depending on locale.
Tuning
Unlike an acoustic piano, this instrument does not need to be tuned. It always stays perfectly in tune.
Transporting
If you move to another location, you can transport this instrument along with your other belongings. You can move the
unit as it is (assembled) or you can disassemble the unit before moving.
Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the
instrument to excessive vibration or shock.
AWM Dynamic Stereo Sampling
The Yamaha YDP-161/141 digital piano offers a rich and versatile range of sounds, which are created using
Yamaha’s proprietary sampling tone-generation system, “AWM Dynamic Stereo Sampling.”
The AWM (Advanced Wave Memory) is a sampling system which creates sound close to that of an acoustic
instrument by using digital technology to record the instrument sound and applying high-quality digital filter
technology to the recorded audio samples.
The waveform of the sound created by playing the key of an acoustic piano differs depending on the playing
strength from pianissimo to fortissimo. The AWM Dynamic Stereo Sampling can produce such dynamic nuances
by recording samples of various playing strengths. The greater the number of samples used, the higher the
expressive quality and potential becomes.
GH (Graded Hammer) keyboard and GHS (Graded Hammer Standard) keyboard
A special Graded Hammer keyboard on the YDP-161, and Graded Hammer Standard keyboard on the YDP-
141, feature graded key weight and response throughout the keyboard range. They respond to a heavier touch
in the low range of the keyboard and a lighter touch in the higher range of the keyboard, thus providing natural
grand-piano type playability.
The Graded Hammer keyboard also offers superb playability for tremolo and other repetitive-striking
techniques.
Useful function for practicing
Your digital piano features a Part Cancel Function. You can record your left-hand and right-hand parts, and then
play them separately; left- and right-hand part. You can also practice a one-hand part while playing the other-
hand part from one of the 50 preset songs.
A built-in metronome is a convenient practice tool to help you develop accurate timing
.
Owner’s Manual (this book)
Quick Operation Guide (separate sheet)
“50 Greats for the Piano” (music book)
My Yamaha Product User Registration*
1
Bench*
2
AC Power cord (YDP-161)
AC Power adaptor (YDP-141)*
2
YDP-161/141 Owner’s Manual
9
ENGLISH
Panel Controls and Terminals
PHONES
MIDI
INOUT
PEDAL
Rear side
Right (higher key side)
Left (lower key side)
Front (keyboard side)
YDP-161
YDP-141
Front (keyboard side)
[ ] switch............................................page 11
Power switch(YDP-161) / Standby/On switch(YDP-141)
This switch turns the power to the unit on ( ) or off
(YDP-161), standby (YDP-141) ( ).
[DEMO/SONG] button .......................... page 13
Listen to the playback of a demo song for each voice
and 50 piano preset songs.
[PIANO/VOICE] button ......................... page 16
This button enables you to select any voice from10
(YDP-161) or 6 (YDP-141) voices. You can also layer
two voices, or select a type of reverb.
[METRONOME] button......................... page 21
Control the metronome functions.
[+ R], [– L] buttons ..................page 13, 16, 23
These buttons enable you to select a preset song to
play back. They also enable you to change the voice
or tempo.
During song playback, pressing the [+ R] or [– L]
button while holding down the [PLAY] button will
toggle a part in the song on or off.
[REC] button......................................... page 23
Record your performance.
[PLAY] button ........................................page 25
Play back your recorded performance.
[MASTER VOLUME] control.................page 12
Adjust the volume level using this control.
[FUNCTION] ...................................page 20, 30
While holding down the [DEMO/SONG] and [PIANO/
VOICE] buttons, press the specified keys to set MIDI
or Transpose parameters.
[PHONES] jack ......................................page 12
A set of standard stereo headphones can be plugged
in here for private practice.
MIDI [IN] [OUT] terminals .....................page 27
Connect a MIDI device to this connector to use
various MIDI functions.
[PEDAL] jack .........................................page 35
Connect the pedal cord.
[AC IN] (YDP-161),
DC IN (YDP-141) jack ............................page 35
(YDP-161) Connect the included power cord here.
(YDP-141) Connect the included power adaptor here.
Pedals ....................................................page 17
Use these pedals when you want notes to sustain
longer or to sound softer and round.
10
YDP-161/141 Owner’s Manual
ENGLISH
Before Using the Digital Piano
Key Cover
To open the key cover:
Lift the cover slightly, then push and slide it open.
To close the key cover:
Slide the cover toward you and gently lower the
cover over the keys.
CAUTION
Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to
avoid catching fingers (yours or others, especially children’s) between the cover and main unit.
Do not place objects, such as a piece of metal or paper, on top of the key cover. Small objects placed on the key cover
may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric
shock, short circuit, fire or other serious damage to the instrument. If this happens, turn off the power immediately and
unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel.
Music Rest
To raise the music rest:
1 Pull the music rest up and toward yourself as
far as it will go.
2 Flip down the two metal supports at the left
and right on the rear of the music rest.
3 Lower the music rest so that it rests on the
metal supports.
To lower the music rest:
1 Pull the music rest toward yourself as far as it
will go.
2 Raise the two metal supports (at the rear of the
music rest).
3 Gently lower the music rest backward until it is
all the way down.
CAUTION
Do not try to use the music rest in a half-raised position. When lowering the music rest, do not release your hands from
the music rest until it is all the way down.
CAUTION
Be careful to avoid catching your fingers
when opening or closing the cover.
YDP-161/141 Owner’s Manual
Before Using the Digital Piano
11
ENGLISH
Turning the Power On
1 Make sure that the [ ] switch is turned off.
2 Make sure that the power cord is connected to the rear panel connector (page 35).
3 Insert the plug on the other end of the power cord into a standard AC outlet.
4 Press the [ ] switch on the right end of the keyboard to turn on the power to the unit.
The power indicator located below the left end of the keyboard lights up.
Press the [ ] switch again to turn off the power to the unit.
The power indicator turns off.
WARNING (YDP-161)
Make sure your digital piano is rated for the AC voltage supplied in the area in which the piano will be used. (The voltage
rating appears on the name plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom
panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your
area. Connecting the unit to an inappropriate AC supply can seriously damage the internal circuitry and may even pose
a shock hazard!
Use only the AC power cord supplied with the instrument. If the supplied power cord is lost or damaged and needs to be
replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard!
The type of AC power cord provided with the instrument may be different depending on the country in which the
instrument was purchased. (In some areas a plug adaptor may be provided to match the pin configuration of the AC wall
outlets in your area.) Do NOT modify the plug provided with the instrument. If the plug will not fit the outlet, have a proper
outlet installed by a qualified electrician.
WARNING (YDP-141)
Be sure to use an appropriate AC outlet.
Be sure to use a specified power adaptor. Using a different power adaptor may cause malfunction, overheating, or fire.
CAUTION (YDP-161/141)
A small amount of electrical current remains even after the [ ] switch has been turned off.
If you plan not to use the instrument for an extended period of time, or if there is a possibility of lightning, be sure to
unplug the instrument from the AC outlet.
Power indicator
[] switch
(YDP-161) Power switch
(YDP-141) Standby/On switch
Before Using the Digital Piano
12
YDP-161/141 Owner’s Manual
ENGLISH
Setting the Volume
When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level.
CAUTION
Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged.
Using Headphones
Connect a pair of headphones to one of the [PHONES] jacks.
Two [PHONES] jacks are provided.
You can connect two sets of standard stereo headphones. (If you are
using only one pair of headphones, you can plug them into either jack.)
The speakers are automatically shut off when a plug is inserted into this
jack.
CAUTION
Do not listen to the instrument at a high volume level through headphones
for a long period of time, or your hearing may be damaged.
Using the headphone hanger (for YDP-161 only)
You can hang the headphones on this instrument. Refer to “Keyboard
Stand Assembly” on page 36 for instructions on installing the headphone
hanger.
NOTICE
Do not hang anything other than the headphones on the hanger.
Otherwise, this instrument or the hanger may be damaged.
The level
decreases.
The level
increases.
PHONES
YDP-161/141 Owner’s Manual
13
ENGLISH
Listening to the Demo Songs
For more information on how
to adjust the tempo of the
demo song playback, see
page 21.
The demo songs will not be
transmitted via MIDI.
Demo songs cannot be used
with the Part select function.
Demo songs are provided that effectively demonstrate each of this instrument’s voices.
1 Press the [DEMO/SONG] button to start playback.
The [PLAY] button indicator lights up, and the demo song for the currently-selected
voice starts playing.
Starting with the selected song, the playback of the demo songs will continue in the
following sequence: other voice demo songs, followed by 50 piano preset songs,
and any songs loaded from the computer. The sequence then returns to the first
demo song and repeats until you stop it.
Selecting a demo song.
While a demo song is playing, press the [+ R] or [– L] button to select and play the
next or previous demo song.
If you wish to select a particular demo song from 10 (YDP-161) or 6 (YDP-141) voice
demo songs, press and hold down the [DEMO/SONG] button, then press one of the
C1–A1 (YDP-161) or C1–F1 (YDP-141) keys.
2 Press the [DEMO/SONG] or [PLAY] button to stop playback.
The [PLAY] button indicator turns off.
Demo songs
“Original” songs are Yamaha originals (©2010 Yamaha Corporation).
Demo songs excluding “Original” songs are re-arranged excerpts from the original compositions.
The lowest key C1 F1 A1
YDP-161 YDP-141
Title Composer
Key Voice Name Key Voice Name
C1 Grand Piano 1 C1 Grand Piano 1 Salut d'amour, op.12 E. Elagr
C
1 Grand Piano 2 C
1 Grand Piano 2 Original Original
D1 E.Piano 1 D1 E.Piano Original Original
D
1 E.Piano 2 Original Original
E1 Harpsichord 1 D
1 Harpsichord
Concerto a cembalo
obbligato, 2 violini, viola e
continuo No.7, BWV.1058
J.S.Bach
F1 Harpsichord 2
Gigue, Französische
Suiten Nr.5, BWV.816
J.S.Bach
F
1 Vibraphone Original Original
G1 Church Organ 1 E1 Church Organ
Herr Christ, der ein'ge
Gottes-Sohn, BWV.601
J.S.Bach
G
1 Church Organ 2 Triosonate Nr.6, BWV.530 J.S.Bach
A1 Strings F1 Strings Original Original
14
YDP-161/141 Owner’s Manual
ENGLISH
Listening to 50 Piano Preset Songs
This digital piano provides performance data for 50 piano songs as well as voice demo songs. You can simply listen to
these songs. You can also refer to the included “50 Greats for the Piano” that contains scores for 50 piano preset songs.
Turning part playback on
and off
The 50 preset songs feature
independent left-hand and
right-hand parts. You can
focus on practicing one of the
parts on the keyboard while
playing back only the other
part.(page 26)
You can play the keyboard
along with the preset song.
You can change the voice
playing on the keyboard.
For more information on how
to adjust the tempo of the
preset song playback, see
page 21.
The default tempo is
automatically selected
whenever a new preset song
is selected, and when a new
preset song begins playback.
When you select a different
song (or a different song is
selected during chained
playback), an appropriate
reverb type will be selected
accordingly.
The 50 piano preset songs will
not be transmitted via MIDI.
1 Pick the number of the song that you want to play back from
the included “50 Greats for the piano.
The number of each piano preset song is assigned to the C2–C
6 keys.
2 While holding down the [DEMO/SONG] button, press one of
the C2–C
6 keys to select a song to play back.
The [PLAY], [+ R] and [– L] button indicators light up, and the selected piano song
starts playing.
Starting with the selected song, the playback of the piano preset songs will continue
in the following sequence: other piano preset songs, followed by songs loaded from
a computer (if any), and then voice demo songs. The sequence then returns to the
first piano preset song and repeats until you stop it.
To play all preset songs and songs loaded from the computer (if any) consecutively
in sequence, hold down the [DEMO/SONG] button, and press the D6 key.
While a song is playing, press the [+ R] or [– L] button to change to the next or
previous song.
3 Press the [DEMO/SONG] or [PLAY] button to stop playback.
The [PLAY], [+ R] and [– L] button indicators turn off.
Song:
On this instrument,
performance data is called
a “Song.” This includes
demo songs and 50 piano
preset tunes.
The highest
key(C7)
Consecutive
playback(D6)
1st song 10th song 20th song 30th song 40th song
C3 C4 C5
C2
50th song(C
6)
YDP-161/141 Owner’s Manual
15
ENGLISH
Listening to Songs Loaded from the Computer
You can transfer song data from your computer to this instrument and play back the songs. (See page 28 for more
information on loading song data from the computer.)
You can load up to 10 songs
or up to 845 KB of data from
the computer.
Use the following table to write
down the song titles you
loaded from the computer.
Turning part playback on
and off
You can focus on practicing
one of the parts on the
keyboard while playing back
only the other part.(page 26)
Default setting:
Channels 1+2
The “Default setting” refers to
the factory setting obtained
when you turn on the power to
this instrument for the first
time.
To adjust the tempo of the
song playback, see page 21.
1 While holding down the [DEMO/SONG] button, press one of
the D
6–C7 keys to select a song to play back.
Song numbers (1 through 10) are assigned to the D
6–C7 keys (see the illustration
below).
The [PLAY], [+ R] and [– L] button indicator lights up, and the selected song starts
playing.Starting with the selected song, the playback of the songs loaded from the
computer will continue in the following sequence: any other songs loaded from the
computer, followed by demo songs, and 50 piano preset songs. The sequence then
returns to the first songs loaded from the computer and repeats until you stop it.
While a song is playing, press the [+ R] or [– L] button to change to the next or
previous song.
2 Press the [DEMO/SONG] or [PLAY] button to stop playback.
Selecting a Song Playback Channel
If a song loaded from the computer uses a voice that is not supported by this
instrument, the originally-assigned voice may not be reproduced accurately. In this
case, switching the song playback channel from “All” to “1 + 2” may improve the
tone to more natural sound.
Selecting 1 + 2 song playback channels:
While pressing and holding down the [DEMO/SONG] button and the [PIANO/
VOICE] button simultaneously, press the C7 key.
Channels 1 + 2 will produce the sound.
Selecting all song playback channels:
When “1&2” is selected,
channels 3 – 16 will be
transmitted via MIDI.
When “ALL” is selected,
no channel will be transmitted
via MIDI.
While pressing and holding down the [DEMO/SONG] button and the [PIANO/
VOICE] button simultaneously, press the B6 key.
All channels 1 through 16 will produce the sound.
Key Song title
D
6
E6
F6
F
6
G6
G
6
A6
A
6
B6
C7
1st song
D
6
C7(The highest key)
10th song
The highest key
C7
The highest key
B6
16
YDP-161/141 Owner’s Manual
ENGLISH
Selecting & Playing Voices
Selecting Voices
To understand the
characteristics of various
voices, listen to demo songs
for each voice (page 13).
Selecting a voice
automatically engages the
best-suited reverb type and
depth (page 18) for that
particular voice.
Press and release the [PIANO/VOICE] button to select the Grand Piano 1 voice.
Press and release the [PIANO/VOICE] button, then press the [+ R] or [– L] button to
select a different voice.
If you wish to select a particular voice directly, press and hold down the [PIANO/VOICE]
button, then press one of the C1–A1 (YDP-161) or C1–F1 (YDP-141) keys.
Turn the [MASTER VOLUME] control to adjust the volume level while playing the keyboard.
YDP-161
YDP-141
Voice:
On this instrument, a voice
means a “tone” or “tonal
color.”
C
1D
1F
1G
1
C1 D1 E1 F1 G1 A1
The lowest key
Key Voice Name Description
C1 Grand Piano 1
Recorded samples from a full concert grand piano. Perfect for classical
compositions as well as any other style that requires acoustic piano.
C
1 Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music.
D1 E.Piano 1 An electronic piano sound created by FM synthesis. Good for popular music.
D
1 E.Piano 2
The sound of an electric piano using hammer-struck metallic “tines.” Soft tone when
played lightly, and an aggressive tone when played hard.
E1 Harpsichord 1
The definitive instrument for baroque music. Since the strings of a harpsichord are
plucked, there is no touch response.
F1 Harpsichord 2 Mixes the same voice an octave higher for a more brilliant tone.
F
1 Vibraphone The sound of a vibraphone played with relatively soft mallets.
G1 Church Organ 1
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music
from the Baroque period.
G
1 Church Organ 2
This is the organ’s full coupler sound, often associated with Bach’s “Toccata and
Fugue”.
A1 Strings
Spacious and large-scale string ensemble. Try combining this voice with piano in
DUAL mode.
Key Voice Name Description
C1 Grand Piano 1
Recorded samples from a full concert grand piano. Perfect for classical
compositions as well as any other style that requires acoustic piano.
C
1 Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music.
D1 E.Piano An electronic piano sound created by FM synthesis. Good for popular music.
D
1 Harpsichord
The definitive instrument for baroque music. Since the strings of a harpsichord are
plucked, there is no touch response.
E1 Church Organ
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music
from the Baroque period.
F1 Strings
Spacious and large-scale string ensemble. Try combining this voice with piano in
DUAL mode.
YDP-161/141 Owner’s Manual
Selecting & Playing Voices
17
ENGLISH
Using the Pedals
If the damper pedal doesn’t
work, make sure that the
pedal cord is properly
plugged into the main unit
(page 35).
Organ and string voices will
continue to sound for as long
as the sostenuto pedal is
depressed.
Damper (Right) pedal
The damper pedal functions in the same way as a
damper pedal on an acoustic piano. When the damper
pedal is pressed, notes sustain longer. Releasing the
pedal immediately stops (damps) any sustained notes.
The damper pedal features a half-pedal function.
Sostenuto (Center) pedal
If you play a note or chord on the keyboard and press
the sostenuto pedal while the note(s) are held, those
notes will sustain as long as you hold the pedal (as if the
damper pedal had been pressed) but all subsequently
played notes will not be sustained. This makes it
possible to sustain a chord, for example, while other
notes are played “staccato.”
Soft (Left) pedal
The soft pedal reduces the volume and slightly changes the timbre of notes played while
the pedal is pressed. The soft pedal will not affect notes that are already playing when it is
pressed.
Damper Resonance (YDP-161)
The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you were pressing
the damper pedal and playing the keyboard. This effect is applied to the entire sound of the instrument.
Default setting:
ONTurning the Damper Resonance effect on or off
While holding down the [PIANO/VOICE] button, press the G
2 key to turn Damper
Resonance “ON”.
While holding down the [PIANO/VOICE] button, press the G2 key to turn Damper
Resonance “OFF”.
What is the half-pedal
function?
This function allows the
sustain length to vary
depending on how far the
pedal is pressed. The
farther you press the pedal,
the more the sound
sustains. For example, if
you press the damper pedal
and all notes you are
playing sound a bit murky
and loud with too much
sustain, you can release the
pedal half way to subdue
the sustain (murkiness)
When you press the damper
pedal here, the notes you play
before you release the pedal
sustain longer.
When you press the sostenuto
pedal here while holding the
note, the note will sustain as
long as you hold the pedal.
The lowest key
G2
(Off)
G
2
(On)
Selecting & Playing Voices
18
YDP-161/141 Owner’s Manual
ENGLISH
Adding Variations to the Sound – Reverb
This control enables you to select various digital reverb effects that add extra depth and expression to the sound to create
a realistic acoustic ambience.
Selecting a reverb type
While holding down the [PIANO/VOICE] button, press one of the C2–E2 keys to select a
reverb type.
Adjusting reverb depth
The default reverb type
(including OFF) and depth
settings are different for each
voice.
Reverb depth range:
0 (no effect)-20 (maximum
depth)
Adjust the reverb depth for the selected voice by pressing one of the C3–G
4 keys while
holding down the [PIANO/VOICE] button. The depth range is from 0 through 20.
While holding down the [PIANO/VOICE] button, press the A4 key to set the reverb to the
depth most suitable for the selected voice.
Key Reverb Type Description
C2 Room
This setting adds a continuous reverb effect to the sound,
similar to the acoustic reverberation you would hear in a
room.
C
2Hall1
For a “bigger” reverb sound, use the HALL 1 setting. This
effect simulates the natural reverberation of a small-size
concert hall.
D2 Hall2
For a truly spacious reverb sound, use the HALL 2 setting.
This effect simulates the natural reverberation of a large
concert hall.
D
2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
C
2D
2
C2 D2 E2
The lowest key
The lowest key
C3: depth 0
G
4: depth 20
A4
The depth value increases as you
press higher keys.
YDP-161/141 Owner’s Manual
Selecting & Playing Voices
19
ENGLISH
Layering Two Voices (Dual mode)
You can layer two voices and play them simultaneously to create a thicker and suppler sound.
1 Engage Dual mode.
You cannot assign the same
voice to Voice 1 and Voice 2
simultaneously in Dual mode.
Reverb in Dual mode
The reverb type assigned to
Voice 1 will take priority. (If the
reverb assigned to Voice 1 is
set to OFF, the reverb
assigned to Voice 2 will be in
effect.)
While holding down the [PIANO/VOICE] button, press two keys in the range of C1
through A1 (YDP-161) or C1 through F1 (YDP-141) simultaneously (or press and
hold down one key, then press another) to select the two desired voices.
Refer to “Selecting Voices” (page 16) for information on the voices that are assigned
to the keys.
The voice assigned to the lower key will be designated as Voice 1, and the voice
assigned to the higher key will be designated as Voice 2.
You can make the following settings for Voices 1 and 2 in Dual mode:
Setting the octave
You can shift the pitch up and down in octave steps for Voice 1 and Voice 2
independently.
Depending on which voices you combine in Dual mode, the combination may
sound better if one of the voices is shifted up or down an octave.
While holding down the [PIANO/VOICE] button, press one of the C5–F5 keys.
Setting the balance
You can adjust the volume balance between two voices. For example, you can set
one voice as the main voice with a louder setting, and make the other voice softer.
While holding down the [PIANO/VOICE] button, press one of the F
5–F
6 keys. A
setting of “0” produces an equal balance between the two Dual mode voices.
Settings below “0” increase the volume of Voice 2 in relation to Voice 1, and settings
above “0” increase the volume of Voice 1 in relation to Voice 2.
2 Exit Dual mode and return to normal play mode.
To return to single-voice play mode, press the [PIANO/VOICE] button.
C1 F1 A1
The lowest key
C5 F5
The highest key
Voice 1
C5 –1
C
50
D5 +1
Voice 2
D
5–1
E5 0
F5 +1
-5
-6 -4 -2
+1 +3 +6
-3 -1 0 +2 +4 +5
F
5C6
The highest key
F
6
Selecting & Playing Voices
20
YDP-161/141 Owner’s Manual
ENGLISH
Transposition
Your digital piano’s Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone
intervals up to a maximum of six semitones, and lets you easily match the pitch of the keyboard to the range of a singer or
other instruments.
For example, if you set the transposition amount to “5,” playing key C produces pitch F. In this way, you can play a song as
though it were in C major, and this instrument will transpose it to F major.
Setting the amount of transposition
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons, press one of the F
2–
F
3 keys to set the desired amount of transposition.
To transpose the pitch down (in semitone steps)
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons, press any key
between F
2 and B2.
To transpose the pitch up (in semitone steps)
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons, press any key
between C
3 and F
3.
To restore the normal pitch
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons, press the C3 key.
Fine-tuning the Pitch
You can fine-tune the pitch of the entire instrument. This function is useful when you play the digital piano along with other
instruments or CD music.
Setting the pitch
Setting range:
427.0–453.0 Hz
Standard pitch:
440.0 Hz
To tune up (in about 0.2Hz steps):
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, and
press the [+ R] button.
To tune down (in about 0.2Hz steps):
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, and
press the [– L] button.
To restore standard pitch:
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, and
press the [+ R] and [– L] buttons simultaneously.
Transpose:
Changing the key signature.
On this instrument,
transposing shifts the pitch
of the entire keyboard.
-5 -3 -1 0 +2 +4 +5
-6 -4 -2 +1
+3 +6
F
2C3
The lowest key
F
3
Transpose down. Transpose up.
Normal pitch.
Hz (Hertz):
This unit of measurement
refers to the frequency of a
sound and represents the
number of times a sound
wave vibrates in a second.
YDP-161/141 Owner’s Manual
Selecting & Playing Voices
21
ENGLISH
Using the Metronome
Your digital piano features a built-in metronome (a device that keeps an accurate tempo) that is convenient for practicing.
1 Press the [METRONOME] button to turn on the metronome.
Start the metronome.
Determining the time signature
While holding down the [METRONOME] button, press one of the C3–F3 keys.
The first beat is accented with a bell sound and the rest with clicks. Default set is 0/
4 (C3). In this setting, clicks sound in all beats.
Adjusting the tempo
The tempo of the metronome and preset song playback can be set from 32 to 280
beats per minute.
Increasing the tempo value in steps of one:
While the metronome is playing, press the [+ R] button. Alternatively, press and
hold down the [METRONOME] button, and press the C
5 key.
Decreasing the tempo value in steps of one:
While the metronome is playing, press the [–] button. Alternatively, press and hold
down the [METRONOME] button, and press the B4 key.
Increasing the tempo value in steps of ten:
Press and hold down the [METRONOME] button, and press the D5 key.
Decreasing the tempo value in steps of ten:
Press and hold down the [METRONOME] button, and press the A
4 key.
A number is assigned to each of the following keys.
While holding down the [METRONOME] button, press a sequence of C4–A4 keys to
specify a three-digit number.
Select a number starting from the left-most digit. For example, to set the tempo “95,”
press the C4 (0), A4 (9) and F4 (5) keys in sequence.
Key
Time
signature
C3 0/4
C
32/4
D3 3/4
D
34/4
E3 5/4
F3 6/4
C
3
C3
The highest key
D
3
D3 E3 F3
METRONOME
024579
8631
A
4
C4
The highest key
C
5
F4 A4 C5 D5B4
Selecting & Playing Voices
22
YDP-161/141 Owner’s Manual
ENGLISH
To reset the tempo to default
value of 120 while the
metronome is stopped, press
the [METRONOME], [+ R]
and [– L] buttons
simultaneously.
Setting range:
C1 (1) ~ G2 (20)
Default setting:
G
1 (10)
Resetting the tempo to default:
While the metronome is playing, press the [+ R] and [– L] buttons simultaneously.
Alternatively, press and hold down the [METRONOME] button, and press the C5
key.
Adjusting the volume
You can change the volume of the metronome sound.
While holding down the [METRONOME] button, press one of the C1–G2 keys to
determine the volume.
2 Press the [METRONOME] button to stop the metronome.
Adjusting the Keyboard Touch (Touch Sensitivity)
This setting is disabled with
some voices, such as an
organ sound.
Default setting:
B6 (Medium)
You can adjust the volume level, which changes depending on how fast or strong you hit
the keys (keyboard touch). Select an appropriate keyboard touch for the voices, songs or
your taste. (This setting does not change the weight of the keyboard.)
While holding down the [PIANO/VOICE] button, press one of the A6–C7 keys to select the
desired touch sensitivity.
24 7
1356
9
11
8
10
12
14 16 19
15 17 18 2013
The lowest key C1 G2
The volume level increases as you press higher keys.
Key
Touch Sensitivity
Setting
Description
A6 Fixed
The volume level does not change at all regardless of
whether you play the keyboard soft or hard.
A
6Soft
The volume level does not change much when you play
the keyboard soft or hard.
B6 Medium
This is the standard piano touch response. (This is the
default setting.)
C7 Hard
The volume level changes very widely from pianissimo to
fortissimo to facilitate dynamic and dramatic expression.
You have to hit the keys hard to produce a loud sound.
A6 C7
YDP-161/141 Owner’s Manual
23
ENGLISH
Recording Your Performance
Your digital piano’s recording function enables you to record your performance of one song. The recorded performance is
called the “user song.”
You can record up to two parts separately. For example, you can record the left-hand and right-hand parts separately.
Or, you can create a duet piece by recording each part one at a time and then playing them together.
Follow the steps below to record and play back your performance.
Recording Your Performance
NOTICE
Be careful not to erase the
recorded data!
When you finish recording
your performance, the
indicator for the part button
([+ R] and/or [– L]) lights up.
Recording another
performance while this
indicator remains on will
overwrite the existing
recorded data.
You cannot engage Record
mode while a demo song is
playing.
The User song will not be
transmitted via MIDI.
Recording capacity
“Recording capacity” is the
maximum amount of
performance data that you
can record. This instrument’s
recording capacity is 100 KB
(approximately 11,000 notes).
1 Make all initial settings.
Before you begin to record, select the voice that you want to use for recording. (See
page16.)
Make any other desired settings (reverb, etc.) as well.
Use the [MASTER VOLUME] control to adjust the volume to a comfortable listening
level. You can also use the [MASTER VOLUME] control to adjust the volume level
during playback.
2 Select a part and engage Record Ready mode.
Hold down the [REC] button and press the [+ R] or [– L] button for the part you
want to record to engage Record Ready mode.
If you press the [REC] button and play both parts without specifying the recording
part, the performance will automatically be recorded to the right part ([+ R]).
Recording does not actually start yet.
Recording the right part ([+ R])
Recording the left part ([– L])
The [REC] button indicator and the selected part button indicator will flash at the
currently-selected tempo. (It may take a moment before the indicator starts to flash.)
Press the [REC] button again if you wish to cancel Record mode.
Turning the playback part on and off
If data has already been recorded in the [+ R] and/or [– L] part, the indicator for
the part(s) will light up, and the data in the part(s) will start playing back as soon as
you start recording your performance.
If you do not want to hear the part playback, hold down the [PLAY] button and press
the button ([+ R] or [– L]) for the part you want to mute.
Its indicator will turn off.
Pressing the part buttons toggles part playback on and off.
or
Recording Your Performance
24
YDP-161/141 Owner’s Manual
ENGLISH
3 Start recording.
Recording starts as soon as you play the keyboard. Alternatively, press the [PLAY]
button to start recording.
The [REC] button indicator lights up steadily, and the indicator for the recording part
flashes at the current tempo.(If data exists in the part you are not recording, the
corresponding part indicator lights up.)
4 Press either the [REC] or [PLAY] button to stop recording.
NOTICE
Do not turn off the power to
this instrument while it is
recording the data in its
internal memory (that is, while
all button indicators are
flashing). Otherwise, all
recorded data, including the
data being recorded, will be
lost.
If the metronome was on when
you started recording, you’ll
be able to keep time with the
metronome while recording,
but the metronome sound will
not be recorded.
You can save the recorded
user song to a computer. You
can also load the user song
data from a computer and
play it back on this instrument.
(See page 28.)
The user song is saved as a
Standard MIDI file (SMF).
(page 28)
When recording is stopped, all indicators (for the [REC], [PLAY], [+ R] and [– L]
buttons) will flash, indicating that the recorded data is being saved to the
instrument. After the data is saved, the button indicator for the recorded part will
light up steadily, indicating that the part now contains data. Record Ready mode will
automatically be cancelled.
Changing the settings for the recorded user song
The initial settings (data recorded at the beginning of a song) can be changed after
recording.
If you wish to change the voice of the user song, before pressing the [REC] button,
select a different voice. Then, simultaneously press the [REC] button and the button
for the part whose initial settings you want to change. The unit enters Record mode.
Without playing the keyboard, press the [REC] button again to apply the change(s)
to the song. If you wish to change the tempo, do so after the unit enters Record
mode.
Individual Parts
Voice selection
Reverb depth
Dual voices
Damper/soft pedal depth
Entire Song
•Tempo
[REVERB] type (including OFF)
YDP-161/141 Owner’s Manual
Recording Your Performance
25
ENGLISH
Playing Back Recorded Performance Data
If the user song contains no
data, pressing the [PLAY]
button will not start playback.
1 Press the [PLAY] button.
The [PLAY] button indicator and the indicator for the part that contains data light up,
and the recorded part starts playing back.
The parts can be turned on or off individually during playback. Refer to the
procedure on page 26.
2 Press the [PLAY] button to stop the playback
When the user song finishes playing back, this instrument automatically returns to
the previous mode.
To stop playback in the middle of a song, press the SONG [PLAY] button.
Erasing Recorded Performance Data
You can erase the entire recorded user song (including both [+ R] and [– L] part).
1 Press the [REC] button to engage Record Ready mode.
The [REC] and [+ R] button indicators flash.
If the left part ([– L]) contains data, [– L] button indicator lights up.
2 While holding down the [PLAY] button, press the [REC] button
to engage Erase Ready mode.
The [REC], [PLAY], [+ R] and [– L] button indicators flash.
To cancel the erase operation, press any button whose indicator is NOT flashing
(such as the [DEMO/SONG], [PIANO/VOICE] or [METRONOME] button).
3 Press the [REC], [PLAY], [+ R] or [– L] button to erase
recorded performance data.
The [REC], [PLAY], [+ R] and [– L] button indicators light up in turn from top to
bottom.
All button indicators turn off after data is erased.
Erasing individual part data
Hold down the [REC] button and press the [+ R] or [ L] button to engage Part Record
Ready mode. (See step 2 on page 23.)
Press the [PLAY] button to start recording. Without playing the keyboard, press the
[PLAY] or [REC] button to stop recording. All data previously recorded for the
selected part will be erased.
The button indicator turn off.
26
YDP-161/141 Owner’s Manual
ENGLISH
Listening to a Specified Part /
Practicing a One-Hand Part
The following songs feature separate right- ([+ R]) and left-hand ([– L]) parts on individual channels. You can turn the
right- ([+ R]) and left-hand ([– L]) parts on or off as desired, in order to practice on the keyboard the corresponding part
(the part that is turned off).
Demo song (page 13) cannot
be used with the Part select
function.
50 Piano Preset Songs (page 14)
The right-hand part is played by [+ R] and the left-hand part is played by [– L]. You can
play back songs with each part turned on or off individually.
Songs loaded from the computer (page 15)
Channel 1 is played by [+ R] and Channel 2 is played by [– L]. You can play back
songs with each channel turned on or off individually.
User songs recorded in the instrument (page 23)
User songs that you recorded to the instrument using the record function. You can play
back these songs with each recorded part turned on or off individually.
1 Play back the song you wish to practice.
When you play back a song
that enables you to select an
individual part or channel, the
indicators for the parts that
contain data light up (either
[+ R] or [ L], or both).
You can select a part to play
or mute only during song
playback.
Canceling the part
playback setting
When you select a different
song (or when a different song
is selected during chained
playback), the part or channel
playback setting is
automatically canceled.
Refer to the page listed above for information on playing back songs.
2 Turn part playback on and off.
While a song is playing back, hold down the [PLAY] button and press the [+ R] or
[– L] button.
The corresponding button indicator turns off and the corresponding part playback
is muted.
Pressing the buttons repeatedly toggles playback on and off.
3 Stop playback.
To stop playback in the middle of a song, press the [PLAY] button.
When playback is complete or stopped, the part playback setting is automatically
canceled.
or
YDP-161/141 Owner’s Manual
27
ENGLISH
Connecting MIDI Instruments
Your digital piano features MIDI connectors. Using the MIDI functions enables you to access a variety of musical genres.
About MIDI
MIDI (Musical Instrument Digital Interface) is a global format standard for performance data transmission and reception
between electronic musical instruments.
Connecting musical instruments that support MIDI via MIDI cables enables you to transfer performance and setting data
between multiple musical instruments. Using MIDI, you can also achieve more advanced performances than using just a
single musical instrument.
Since MIDI data that can be
transmitted or received varies
depending on the type of MIDI
devices. Please check the
“MIDI Implementation Chart”
on the web (please refer to
“Data List” on page 6) to find
out what MIDI data and
commands your devices can
transmit or receive.
You need a dedicated MIDI
cable (optional) to make a
MIDI connection. You can
purchase MIDI cables at
musical instrument stores.
MIDI’s Capability
MIDI functions enable you to transfer performance data between MIDI devices, load song data from a connected computer
to your instrument, and transmit and save user song data to a computer.
Transferring performance data to and from another MIDI device
You cannot transmit the voice
demo songs, 50 piano preset
songs, or user song from this
instrument to another MIDI
device.
Transferring MIDI data to and from a computer
For more information on the
transmission and reception of
song data, refer to
“Transmitting Song Data
between the Computer and
the Digital Piano” on page 28.
MIDI
INOUT
Your digital piano MIDI instrument
MIDI [OUT]
connector
MIDI IN
connector
MIDI [IN]
connector
Optional
MIDI cables
MIDI OUT
connector
POWER
IN
OUT
Computer Your digital piano
MIDI IN
connector
MIDI OUT
connector
UX16 (optional)
USB port
Connecting MIDI Instruments
28
YDP-161/141 Owner’s Manual
ENGLISH
Connecting the Digital Piano to a Computer
Connecting the digital piano to a computer using the MIDI connectors enables you to transfer MIDI data between the piano
and the computer. This connection requires that you have appropriate application software installed on the computer.
Also, installing Musicsoft Downloader on the computer enables you to transfer song data between the piano and the
computer. (see next section)
Connecting this instrument to the USB port on a computer
Before you connect this
instrument to a computer, first
turn off the power to both this
instrument and the computer.
After you make the
connections, turn on the
power to the computer first,
then turn on the power to this
instrument.
When this instrument is used
as a tone module,
performance data with voices
that are not found on this
instrument will not be played
correctly.
Use an optional USB-MIDI interface (such as a Yamaha UX16) to connect this instrument’s
MIDI connectors to the computer’s USB port.
You must install the USB-MIDI driver on the computer correctly so that you can control
your MIDI instrument from the computer. The USB-MIDI driver is a software application
that enables MIDI signals to be transmitted between the sequence software on the
computer and the connected MIDI instrument. For more information, refer to the user’s
manual that came with the USB interface device.
Transmitting Song Data between the Computer and
the Digital Piano
In addition to the demo songs and the 50 piano preset songs stored in this instrument, you can play data for another song
by loading it from a connected computer.
You can save data from this instrument (such as recorded songs, etc.) to a computer, as
well as load saved data back to the instrument from the computer.
To be able to use this function, you must first download Musicsoft Downloader (free
software) from Yamaha website at the following URL, and install it on your computer.
http://music.yamaha.com/download/
Please visit the URL above to get the information on the computer system requirement for
Musicsoft Downloader.
For more information on transferring data, please refer to “Transferring Data Between the
Computer and Instrument (for unprotected data)” in the Help file that came with Musicsoft
Downloader.
POWER
MIDI
INOUT
Computer
Your digital piano
SMF (Standard MIDI File)
This file features a popular
sequence format (for
recording performance
data). This file is sometimes
called a “MIDI file.” The file
extension is MID. You can
play the SMF format song
using music software or a
sequencer that supports
SMF. This instrument also
supports SMF.
YDP-161/141 Owner’s Manual
Connecting MIDI Instruments
29
ENGLISH
While Musicsoft Downloader is
operating, the [REC] and
[PLAY] button indicators on
the piano light up.
Before you use this
instrument, close the
Musicsoft Downloader window
and quit the application.
Do not manually change the
file name by using a
computer; doing so will render
the file unloadable as the user
song.
Requirements for song data that can be loaded from a computer to this instrument
You can play the loaded songs (page 15) and loaded user song (page 25).
NOTICE
Do not turn off the power to this instrument or unplug the instrument during data
transmission. Otherwise, the data being transmitted will not be saved. Furthermore,
flash memory operation may become unstable, causing the entire memory to be
erased when you turn the power to the instrument on or off.
Data you can transfer from this instrument to a computer
Backing up Data and Initializing the Settings
Backing up data to flash memory
Backup data for metronome
volume and time signature,
touch sensitivity, and tuning is
included in the file named
“10YDP.BUP” and stored in
this instrument. You can
transfer the backup data
between the instrument and a
computer.
The following items will be stored in flash memory on this instrument. This data will be kept
after you turn off the power to the instrument.
Initializing the settings
If this instrument somehow
becomes disabled or
malfunctions, turn off the
power to the instrument, then
perform the initialization
procedure.
When you initialize the settings, all data, excluding the songs loaded from a computer, will
be initialized and reset to the factory default settings.
While holding down the C7 (the highest) key, turn on the power to the instrument. The data
(excluding the data for the songs loaded from a computer) will be initialized.
NOTICE
Do not turn off the power to this instrument while it is initializing the data in its internal
memory (that is, while the [REC] and [PLAY] button indicators are flashing).
Please note that initializing the settings will erase your recorded song (user song).
Number of songs: Up to 10 songs plus one user song
Maximum data size: 845KB plus 100KB (user)
Data format: SMF Format 0 & 1
Backup data:10YDP.BUP (loaded from instrument)
User song : USERSONG1.MID
Back up data : 10YDP.BUP
Song data (once it has been loaded from the computer)
Backup data
Metronome volume
Metronome time signature
Touch sensitivity
Tuning
Recorded performance data (user song)
Song data once loaded from a computer
C7
The highest key
30
YDP-161/141 Owner’s Manual
ENGLISH
MIDI Functions
You can make detailed adjustments to MIDI settings.
MIDI Transmit/Receive Channel Selection
In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data
transfer.
This parameter enables you to specify the channel on which the digital piano transmits or receives MIDI data.
In Dual mode, Voice 1 data is
transmitted on its specified
channel and Voice 2 data is
transmitted on the next greater
channel number relative to the
specified channel. In this
mode, no data is transmitted if
the transmit channel is set to
“OFF.”
Program change and other
like channel messages
received will not affect this
instrument’s panel settings or
the notes you play on the
keyboard.
Data for the demo song,
50 piano preset songs and
user song cannot be
transmitted via MIDI.
Setting the transmit channel
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press
one of the C1–E2 keys.
Setting the receive channel
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press
one of the C4–F5 keys.
Local Control ON/OFF
“Local Control” refers to the fact that, normally, the keyboard of this digital piano controls its internal tone generator,
allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal
tone generator is controlled locally by its own keyboard.
Local control can be turned OFF, however, so that the keyboard of this digital piano does not play the internal voices, but
the appropriate MIDI information is still transmitted via the MIDI [OUT] connector when notes are played on the keyboard.
At the same time, the internal tone generator responds to MIDI information received via the MIDI [IN] connector.
When Local control is turned
OFF, the keyboard of this
instrument does not play the
internal voices.
Default setting: ON
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons
simultaneously, press the C6 key.
Pressing the C6 key repeatedly toggles between Local Control On and Off.
MIDI receive channel is ALL:
A “Multi-timbre” Receive mode is available. In this mode, this instrument receives
different parts from the connected MIDI device on any or all 16 MIDI channels and
plays multi-channel song data.
MIDI receive channel is 1+2:
A “1+2” Receive mode is available. It allows simultaneous reception on channels 1
and 2 only, enabling this instrument to play 1 and 2 channel song data received from a
music computer or sequencer.
1356810
24 79111416
12 13 15 1356810
24 79111416
12 1315
1+2
For setting the
transmit channels.
(C1
D
2)
For setting the
receive channels.
(C4
F5)
D
2C1
E2
C4
E5
F5
ALLOFF
The lowest key
C6
The highest key
YDP-161/141 Owner’s Manual
MIDI Functions
31
ENGLISH
Program Change ON/OFF
Normally this instrument will respond to MIDI program change numbers received from an external keyboard or other MIDI
device, causing the correspondingly-numbered voice to be selected on the corresponding channel (the keyboard voice
does not change). This instrument will normally also send a MIDI program change number whenever one of its voices is
selected, causing the correspondingly-numbered voice or program to be selected on the external MIDI device if the device
is set up to receive and respond to MIDI program change numbers.
This function makes it possible to cancel program change number reception and transmission so that voices can be
selected on this instrument without affecting the external MIDI device.
For information on program
change numbers for each
voice, check the MIDI Data
Format on the web (please
refer to “Data List” on page 6).
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons
simultaneously, press the C
6 key. Pressing the C
6 key repeatedly toggles between
Program Change On and Off.
Control Change ON/OFF
MIDI Control Change data refers to MIDI information related to performance expression (such as damper pedal
information).
You can transmit MIDI Control Change data from this instrument to control the operation of the connected MIDI device. (For
example, if you operate this instrument’s damper pedal, this instrument will transmit MIDI Control Change data.)
On the other hand, MIDI performance data of this instrument will respond to MIDI Control Change data received from the
connected MIDI device. (At this time, the voice you are playing on the keyboard will not be affected by the Control Change
data.)
The ability to transmit and receive MIDI Control Change data is sometimes very useful. Turn Control Change On if it is
convenient for you to have this capability. Turn Control Change Off if you rather prefer not to have this capability.
Default setting: ON
For information on control
changes that can be used
with this instrument, check the
MIDI Data Format on the web
(please refer to “Data List” on
page 6).
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons
simultaneously, press the D6 key. Pressing the D6 key repeatedly toggles between
Control Change On and Off.
C
6
The highest key
D6
The highest key
32
YDP-161/141 Owner’s Manual
ENGLISH
Troubleshooting
Options
BC-100 Bench
A comfortable bench styled to match your Yamaha digital piano.
UX16
USB-MIDI interface
HPE-150
Headphones
Problem Possible Cause and Solution
This instrument does not turn on.
This instrument has not been plugged in properly. (YDP-161) Securely
insert the female plug into the socket on this instrument, and the male
plug into a proper AC outlet (page 35).
(YDP-141) Securely insert the adaptor plug into the socket on this
instrument, and the adaptor plug into a proper AC outlet (page 35).
Noise from the speakers or headphones is
audible.
The noise may be due to interference caused by the use of a mobile
phone in close proximity to this instrument. Turn off the mobile phone,
or move it further away from this instrument.
The overall volume is low, or no sound is
heard.
The Master Volume is set too low. Set it to an appropriate level using
the [MASTER VOLUME] control.
Make sure a pair of headphones is not connected to the headphones
jack (page 12).
Make sure that Local Control (page 30) is ON.
The damper pedal has no effect.
The pedal cord may not be securely connected to the [PEDAL] jack.
Be sure to insert the pedal cord all the way until the metal part of the
cord plug disappears from view (page 35).
The damper pedal has little effect.
The damper pedal was pressed when the power was turned on. This
is not a malfunction; release the pedal and press it again to reset the
function.
YDP-161/141 Owner’s Manual
33
ENGLISH
Keyboard Stand Assembly
CAUTION
Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance
with the sequence given below.
Assembly should be carried out by at least two persons.
Assemble the stand on a hard and flat floor with ample space.
Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Use of
incorrect screws can cause damage or malfunction of the product.
Be sure to tighten up all screws upon completing assembly of each unit.
To disassemble, reverse the assembly sequence given below.
Remove all parts from the package and make sure you
have all of the items.
1 Attach (finger-tighten) C to D and E.
1-1 Untie and straighten out the bundled pedal cord.
Don’t discard the vinyl tie. You will need it later in
step 6.
1-2 Align D and E with each end of C.
1-3 Attach D and E to C by finger-tightening the long
screws (6 × 20mm).
Have a Phillips-head (+) screwdriver ready
B
A
DE
C
Bundled pedal cord
inside
AC Power cord (YDP-161)
AC Power adaptor (YDP-141)
Assembly Parts
6 × 20 mm long screws × 4
6 ×16 mm short screws × 4
4 ×12 mm thin screws ×2
4 × 20 mm tapping screws ×4
Cord holders × 2
Headphone hanger set (YDP-161 only)
4 ×10 mm thin screws × 2 Headphone hanger
L
C
D
E
1-2
1-3
1-1
YDP-161/141 Owner’s Manual
34
Keyboard Stand Assembly
ENGLISH
2 Attach B.
Depending on the model of digital piano you
purchased, the surface color of one side of B may be
different from the other side. In this case, position B so
that the side of the surface color similar to D and E
faces the player.
2-1 Place the lower side of B on each foot of D and E,
then attach the upper side to D and E.
2-2 Attach the top of B to D and E by finger-tightening
the thin screws (4 × 12mm).
2-3 While pushing the lower part of D and E from
outside, secure the bottom ends of B using two
tapping screws (4 × 20mm).
2-4 Insert the other two tapping screws (4 × 20mm)
into the other two screw holes to secure B.
2-5 Securely tighten the screws on the top of B that
were attached in Step 2-2.
3 Securely tighten the screws on C that were
attached in Step 1-3.
4 Mount A.
5 Secure A.
5-1 Adjust the position of A so that the left and right
ends of A will project beyond D and E equally
when seen from the front.
5-2 Secure A by tightening the short screws
(6 × 16mm) from the front.
R
L
B
D
E
2-2, 2-5
2-1
2-3
2-4
2-3
Place the
bottom ends
of the rear
panel on
each foot.
B
C
3
CAUTION
Fingers can become pinched between the main
unit and the rear or side panels, be extra careful
so as not to drop the main unit.
Do not hold the keyboard in any position other
than the position shown in the illustration.
A
B
D
E
At least
10 cm
At least
10 cm
Be sure to place your hands at least
10 cm from either end of the main unit
when positioning it.
5-1
5-2
A
Projection
of A
YDP-161/141 Owner’s Manual
Keyboard Stand Assembly
35
ENGLISH
6 Connect the pedal cord.
6-1 Insert the pedal cord plug to the [PEDAL] jack
from the rear.
6-2 Attach the cord holders to the rear panel as
shown, then clip the cord into the holders.
6-3
Use a vinyl tie to take up any slack in the pedal cord.
7 Connect the power cord (for YDP-161) or
power adaptor (for YDP-141) to the unit.
WARNING
An improper voltage setting can cause serious damage
to this instrument or result in improper operation.
YDP-161
7-1 Set the voltage selector (for models that
feature a voltage selector).
7-2 Connect the plug on the power cord to the
rear panel connector.
6-1
6-3
6-2
Voltage Selector
Before connecting the AC power cord, check the
setting of the voltage selector which is provided in
some areas. To set the selector for 110V, 127V, 220V
or 240V main voltages, use a “minus” screwdriver to
rotate the selector dial so that the correct voltage for
your region appears next to the pointer on the
panel. The voltage selector is set at 240V when the
unit is initially shipped. After the proper voltage has
been selected, connect the AC power cord to the
[AC IN] jack and an AC wall outlet. A plug adaptor
may be also provided in some areas to match the
pin configuration of the AC wall outlets in your area.
240
127
110
220
7-1
7-2
YDP-141
7-1 Connect the DC plug of the power adaptor to
the rear panel connector, and loop cord
slack onto the cord hook so that the plug will
not be disconnected accidentally.
CAUTION
Do not bend the cord tightly when you hang the
cord on the cord hook. Otherwise, a short-circuit or
fire may result.
Connecting the pedal cord
Insert the pedal cord securely until the metal part of the
cord plug disappears from view. Otherwise, the pedal
may not function properly.
MIDI
Insert the cord all the
way until the metal part
of the plug disappears
from view.
YDP-161/141 Owner’s Manual
36
Keyboard Stand Assembly
ENGLISH
8 Set the adjuster.
Rotate the adjuster until it comes in firm contact with
the floor surface.
9 Attach the headphone hanger. (for YDP-161
only)
Use the included two screws (4 × 10mm) to attach
the hanger as shown in the illustration below.
After completing the assembly, please
check the following.
PHONES
Are there any parts left over?
Review the assembly procedure and correct any
errors.
Is this instrument clear of doors and other movable
fixtures?
Move the instrument to an appropriate location.
Does this instrument make a rattling noise when you
shake it?
Tighten all screws.
Does the pedal box rattle or give way when you step
on the pedals?
Turn the adjuster so that it is set firmly against the
floor.
Are the pedal and power cords inserted securely into
the sockets?
Check the connection.
If the main unit creaks or is otherwise unsteady when
you play on the keyboard, refer to the assembly
diagrams and retighten all screws.
When moving the instrument after assembly, always
hold the bottom of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper
handling can result in damage to the instrument or
personal injury.
Key cover
Top po rt ion
Do not
hold here
Hold here
Do not
hold here
YDP-161/141 Owner’s Manual
37
ENGLISH
INDEX
Numerics
50 Piano Preset Songs .............................................. 14
A
AC IN ........................................................................ 9
Accessories ............................................................... 8
Adjust
Keyboard Touch
...............................................22
Reverb Depth ................................................... 18
Tempo (metronome) .......................................... 21
Volume (metronome) ......................................... 22
Assembly ................................................................ 33
B
Backup ...................................................................29
C
Connecting a Computer ............................................ 28
Control Change ........................................................ 31
D
Damper Pedal .......................................................... 17
Damper Resonance .................................................. 17
DC IN ........................................................................ 9
Default setting .......................................................... 15
DEMO/SONG ....................................................... 9, 13
Dual mode ............................................................... 19
E
Erase recorded song ................................................ 25
H
Half-pedal ................................................................ 17
Headphone .............................................................. 12
Headphone hanger ............................................. 12, 36
I
Initializing the Settings .............................................. 29
K
Key Cover ................................................................ 10
Keyboard Stand ....................................................... 33
L
Layering Two Voices (Dual mode) .............................. 19
Local Control ........................................................... 30
M
MASTER VOLUME ................................................ 9, 12
METRONOME ...................................................... 9, 21
MIDI ........................................................................ 27
MIDI cables ............................................................. 27
MIDI connectors ....................................................... 27
MIDI Data Format ....................................................... 6
MIDI Implementation Chart .......................................... 6
MIDI IN/OUT .............................................................. 9
Music Rest ............................................................... 27
Musicsoft Downloader ............................................... 28
O
Options ................................................................... 32
P
Part ................................................................... 23, 26
PEDAL .......................................................... 9, 17, 35
PHONES ............................................................. 9, 12
PIANO/VOICE ...................................................... 9, 16
PLAY .................................................................. 9, 25
Playing Back Recorded Performance Data .................. 25
POWER ............................................................... 9, 11
Preset songs
50 Piano Preset Songs
................................... 14
Program Change ...................................................... 31
R
REC .................................................................... 9, 23
Recording your Performance ..................................... 23
Reverb .................................................................... 18
S
SMF ........................................................................ 28
Soft Pedal ................................................................ 17
Song ....................................................................... 13
Song Playback Channel ............................................ 15
Songs Loaded from the Computer .............................. 15
Sostenuto Pedal ....................................................... 17
Specifications .......................................................... 38
Standard MIDI File .................................................... 28
Start/Stop playback
50 Piano Preset Songs
....................................... 14
Demo Songs ..................................................... 13
Songs Loaded from the Computer ...................... 15
User Song ........................................................ 25
T
Tempo .................................................................... 21
Touch Sensitivity ...................................................... 22
Transmitting Song Data ............................................. 28
Transporting .............................................................. 8
Transposition ........................................................... 20
Troubleshooting ....................................................... 32
Tuning
Fine tuning of Pitch
........................................ 20
U
User Song ............................................................... 23
V
Voice ...................................................................... 16
38
YDP-161/141 Owner’s Manual
ENGLISHFRANÇAIS ESPAÑOL
Specifications
Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right
to change or modify products or specifications at any time without prior notice. Since specifications, equipment or
options may not be the same in every locale, please check with your Yamaha dealer.
YDP-161 YDP-141
Size/Weight
Width 1357mm [53-7/16"]
Height (with music rest) 815mm [32-1/16"] (969mm [38-1/8"])
Depth 422mm [16-5/8"]
Weight 42kg (92 lbs., 10oz) 37kg (81 lbs., 9oz)
Control
Interface
Keyboard
Number of Keys 88
Type GH(Graded Hammer) keyboard
GHS(Graded Hammer Standard)
keyboard with
matte black keytops
Touch Sensitivity Hard/Medium/Soft/Fixed
Pedal
Number of Pedals 3
Half Pedal Yes
Functions Damper , Sostenuto, Soft
Panel Language English
Cabine
Key Cover Sliding
Music Rest Yes
Voices
Ton e
Generation
Tone Generating
Technology
AWM Dynamic Stereo Sampling
Number of Dynamic
Levels
3
Polyphony
Number of
Polyphony (Max.)
128 64
Preset Number of Voices 10 6
Effects
Types
Reverb Yes
Damper Resonance Yes --
Part Dual Yes
Songs
Preset
Number of Preset
Songs
10 Demo Songs, 50 Piano Preset Songs 6 Demo Songs, 50 Piano Preset Songs
Recording
Number of Songs 1
Number of Tracks 2
Data Capacity One Song 100KB (approx.11,000 notes)
Recording Function Yes
Compatible
Data
Format
Playback Standard MIDI File (SMF) Format 0 & 1
Recording Standard MIDI File (SMF) Format 0
Functions
Overall
Controls
Metronome Yes
Tempo Range 32 - 280
Transpose -6 - 0 - +6
Tuning Yes
Storage and
Connectivity
Storage Internal Memory
User song : One song 100KB
Loading song data from a computer : Up to 10 songs; Total maximum size 845KB
Connectivity
Headphones ×2
MIDI IN/OUT
Amplifiers
and
Speakers
Amplifiers 20W×2 6W×2
Speakers Oval (12 cm × 6 cm) × 2
Accessories
Owner’s Manual, 50 greats for the Piano (Music Book), Quick Operation Guide,
Bench (included or optional depending on locale), My Yamaha Product User Registration
AC Power Cord
AC Power Adaptor (included or optional
depending on locale)
PA-150 or an equivalent
Specifications
YDP-161/141 Owner’s Manual
39
(weee_eu)
YDP-161
(2 wires)
This applies only to products distributed by Yamaha-
Kemble Music (U.K.) Ltd.
YDP-141
(standby)
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used
electrical and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable
collection points, in accordance with your national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any
potential negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local
municipality, your waste disposal service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct method of disposal.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in
accordance with the following code:
BLUE :NEUTRAL
BROWN :LIVE
As the colors of the wires in the mains lead of this
apparatus may not correspond with the colored makings
identifying the terminals in your plug proceed as follows:
The wire which is colored BLUE must be connected to
the terminal which is marked with the letter N or colored
BLACK.
The wire which is colored BROWN must be connected
to the terminal which is marked with the letter L or
colored RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så
länge som den ar ansluten till vägguttaget, även om
själva apparaten har stängts av.
ADVARSEL: Netspændingen til dette apparat er IKKE
afbrudt, sålænge netledningen sidder i en stikkontakt,
som er tændt — også selvom der er slukket på
apparatets afbryder.
VAROITUS:
Laitteen toisiopiiriin kytketty käyttökytkin ei
irroita koko laitetta verkosta.
DIC565
YDP-161
YDP-141
For information on assembling the keyboard stand, refer to the instructions at the end of this manual.
IMPORTANT — Check your power supply — (YDP-161)
Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom
panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the
power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at
240V when the unit is initially shipped.
To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears
next to the pointer on the panel.
Owner's Manual
EN
U.R.G., Pro Audio & Digital Musical Instrument Division,Yamaha Corporation
© 2010 Yamaha Corporation
WS59960 003APGR-02B0
Pr
inted in Indonesia
For details of products, please contact your nearest Yamaha
representative or the authorized distributor listed below.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou
au distributeur le plus proche de vous figurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
Para detalles sobre productos, contacte su tienda Yamaha más
cercana o el distribuidor autorizado que se lista debajo.
HEAD OFFICE
Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650
Tel: +81-53-460-3273
EKB50
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Scarborough, Ontario,
M1S 3R1, Canada
Tel: 416-298-1311
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620,
U.S.A.
Tel: 714-522-9011
MEXICO
Yamaha de México S.A. de C.V.
Calz. Javier Rojo Gómez #1149,
Col. Guadalupe del Moral
C.P. 09300, México, D.F., México
Tel: 55-5804-0600
BRAZIL
Yamaha Musical do Brasil Ltda.
Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi,
CEP 04534-013 Sao Paulo, SP. BRAZIL
Tel: 011-3704-1377
ARGENTINA
Yamaha Music Latin America, S.A.
Sucursal de Argentina
Olga Cossettini 1553, Piso 4 Norte
Madero Este-C1107CEK
Buenos Aires, Argentina
Tel: 011-4119-7000
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Torre Banco General, Piso 7, Urbanización Marbella,
Calle 47 y Aquilino de la Guardia,
Ciudad de Panamá, Panamá
Tel: +507-269-5311
THE UNITED KINGDOM/IRELAND
Yamaha Music U.K. Ltd.
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, England
Tel: 01908-366700
GERMANY
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Europe GmbH
Branch Switzerland in Zürich
Seefeldstrasse 94, 8008 Zürich, Switzerland
Tel: 01-383 3990
AUSTRIA
Yamaha Music Europe GmbH Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-60203900
CZECH REPUBLIC/SLOVAKIA/
HUNGARY/SLOVENIA
Yamaha Music Europe GmbH Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-602039025
POLAND/LITHUANIA/LATVIA/ESTONIA
Yamaha Music Europe GmbH
Branch Sp.z o.o. Oddzial w Polsce
ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland
Tel: 022-868-07-57
THE NETHERLANDS/
BELGIUM/LUXEMBOURG
Yamaha Music Europe Branch Benelux
Clarissenhof 5-b, 4133 AB Vianen, The Netherlands
Tel: 0347-358 040
FRANCE
Yamaha Musique France
BP 70-77312 Marne-la-Vallée Cedex 2, France
Tel: 01-64-61-4000
ITALY
Yamaha Musica Italia S.P.A.
Viale Italia 88, 20020 Lainate (Milano), Italy
Tel: 02-935-771
SPAIN/PORTUGAL
Yamaha Música Ibérica, S.A.
Ctra. de la Coruna km. 17, 200, 28230
Las Rozas (Madrid), Spain
Tel: 91-639-8888
GREECE
Philippos Nakas S.A. The Music House
147 Skiathou Street, 112-55 Athens, Greece
Tel: 01-228 2160
SWEDEN
Yamaha Scandinavia AB
J. A. Wettergrens Gata 1, Box 30053
S-400 43 Göteborg, Sweden
Tel: 031 89 34 00
DENMARK
YS Copenhagen Liaison Office
Generatorvej 6A, DK-2730 Herlev, Denmark
Tel: 44 92 49 00
FINLAND
F-Musiikki Oy
Kluuvikatu 6, P.O. Box 260,
SF-00101 Helsinki, Finland
Tel: 09 618511
NORWAY
Norsk filial av Yamaha Scandinavia AB
Grini Næringspark 1, N-1345 Østerås, Norway
Tel: 67 16 77 70
ICELAND
Skifan HF
Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland
Tel: 525 5000
RUSSIA
Yamaha Music (Russia)
Office 4015, entrance 2, 21/5 Kuznetskii
Most street, Moscow, 107996, Russia
Tel: 495 626 0660
OTHER EUROPEAN COUNTRIES
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
TURKEY/CYPRUS
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
OTHER COUNTRIES
Yamaha Music Gulf FZE
LOB 16-513, P.O.Box 17328, Jubel Ali,
Dubai, United Arab Emirates
Tel: +971-4-881-5868
THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd.
2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,
Shanghai, China
Tel: 021-6247-2211
HONG KONG
Tom Lee Music Co., Ltd.
11/F., Silvercord Tower 1, 30 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel: 2737-7688
INDIA
Yamaha Music India Pvt. Ltd.
5F Ambience Corporate Tower Ambience Mall Complex
Ambience Island, NH-8, Gurgaon-122001, Haryana, India
Tel: 0124-466-5551
INDONESIA
PT. Yamaha Music Indonesia (Distributor)
PT. Nusantik
Gedung Yamaha Music Center, Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: 21-520-2577
KOREA
Yamaha Music Korea Ltd.
8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,
Kangnam-Gu, Seoul, Korea
Tel: 080-004-0022
MALAYSIA
Yamaha Music Malaysia, Sdn., Bhd.
Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,
Petaling Jaya, Selangor, Malaysia
Tel: 3-78030900
PHILIPPINES
Yupangco Music Corporation
339 Gil J. Puyat Avenue, P.O. Box 885 MCPO,
Makati, Metro Manila, Philippines
Tel: 819-7551
SINGAPORE
Yamaha Music Asia Pte., Ltd.
#03-11 A-Z Building
140 Paya Lebor Road, Singapore 409015
Tel: 747-4374
TAIWAN
Yamaha KHS Music Co., Ltd.
3F, #6, Sec.2, Nan Jing E. Rd. Taipei.
Taiwan 104, R.O.C.
Tel: 02-2511-8688
THAILAND
Siam Music Yamaha Co., Ltd.
4, 6, 15 and 16th floor, Siam Motors Building,
891/1 Rama 1 Road, Wangmai,
Pathumwan, Bangkok 10330, Thailand
Tel: 02-215-2626
OTHER ASIAN COUNTRIES
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2317
AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 99 Queensbridge Street, Southbank,
Victoria 3006, Australia
Tel: 3-9693-5111
NEW ZEALAND
Music Works LTD
P.O.BOX 6246 Wellesley, Auckland 4680,
New Zealand
Tel: 9-634-0099
COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
NORTH AMERICA
CENTRAL & SOUTH AMERICA
EUR
OPE
AFRICA
MIDDLE EAS
T
ASIA
OCEAN
IA

Documenttranscriptie

Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México S.A. de C.V. Calz. Javier Rojo Gómez #1149, Col. Guadalupe del Moral C.P. 09300, México, D.F., México Tel: 55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda. Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi, CEP 04534-013 Sao Paulo, SP. BRAZIL Tel: 011-3704-1377 ARGENTINA Yamaha Music Latin America, S.A. Sucursal de Argentina Olga Cossettini 1553, Piso 4 Norte Madero Este-C1107CEK Buenos Aires, Argentina Tel: 011-4119-7000 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES THE NETHERLANDS/ BELGIUM/LUXEMBOURG Yamaha Music Europe Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 ITALY Yamaha Musica Italia S.P.A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 SPAIN/PORTUGAL Yamaha Música Ibérica, S.A. Ctra. de la Coruna km. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 GREECE Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160 SWEDEN Yamaha Scandinavia AB J. A. Wettergrens Gata 1, Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 DENMARK YS Copenhagen Liaison Office Generatorvej 6A, DK-2730 Herlev, Denmark Tel: 44 92 49 00 FINLAND F-Musiikki Oy Kluuvikatu 6, P.O. Box 260, SF-00101 Helsinki, Finland Tel: 09 618511 Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanización Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, Panamá Tel: +507-269-5311 NORWAY EUROPE ICELAND THE UNITED KINGDOM/IRELAND Yamaha Music U.K. Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700 GERMANY Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 SWITZERLAND/LIECHTENSTEIN Yamaha Music Europe GmbH Branch Switzerland in Zürich Seefeldstrasse 94, 8008 Zürich, Switzerland Tel: 01-383 3990 AUSTRIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 CZECH REPUBLIC/SLOVAKIA/ HUNGARY/SLOVENIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-602039025 POLAND/LITHUANIA/LATVIA/ESTONIA Yamaha Music Europe GmbH Branch Sp.z o.o. Oddzial w Polsce ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland Tel: 022-868-07-57 Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. Norsk filial av Yamaha Scandinavia AB Grini Næringspark 1, N-1345 Østerås, Norway Tel: 67 16 77 70 Skifan HF Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland Tel: 525 5000 RUSSIA Yamaha Music (Russia) Office 4015, entrance 2, 21/5 Kuznetskii Most street, Moscow, 107996, Russia Tel: 495 626 0660 OTHER EUROPEAN COUNTRIES Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 AFRICA Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 MIDDLE EAST ASIA THE PEOPLE’S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 021-6247-2211 HONG KONG Tom Lee Music Co., Ltd. 11/F., Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 INDIA Yamaha Music India Pvt. Ltd. 5F Ambience Corporate Tower Ambience Mall Complex Ambience Island, NH-8, Gurgaon-122001, Haryana, India Tel: 0124-466-5551 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 21-520-2577 KOREA Yamaha Music Korea Ltd. 8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong, Kangnam-Gu, Seoul, Korea Tel: 080-004-0022 MALAYSIA Yamaha Music Malaysia, Sdn., Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-78030900 PHILIPPINES Yupangco Music Corporation 339 Gil J. Puyat Avenue, P.O. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 SINGAPORE Yamaha Music Asia Pte., Ltd. #03-11 A-Z Building 140 Paya Lebor Road, Singapore 409015 Tel: 747-4374 TAIWAN Yamaha KHS Music Co., Ltd. 3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C. Tel: 02-2511-8688 THAILAND Siam Music Yamaha Co., Ltd. 4, 6, 15 and 16th floor, Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan, Bangkok 10330, Thailand Tel: 02-215-2626 Owner's Manual OTHER ASIAN COUNTRIES Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317 OCEANIA AUSTRALIA Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111 NEW ZEALAND TURKEY/CYPRUS Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 OTHER COUNTRIES Yamaha Music Gulf FZE LOB 16-513, P.O.Box 17328, Jubel Ali, Dubai, United Arab Emirates Tel: +971-4-881-5868 Music Works LTD P.O.BOX 6246 Wellesley, Auckland 4680, New Zealand Tel: 9-634-0099 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-3273 EKB50 U.R.G., Pro Audio & Digital Musical Instrument Division,Yamaha Corporation © 2010 Yamaha Corporation WS59960 003APGR-02B0 Printed in Indonesia DIC565 YDP-161 YDP-141 For information on assembling the keyboard stand, refer to the instructions at the end of this manual. IMPORTANT — Check your power supply — (YDP-161) Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel. EN ENGLISH 2 3 ENGLISH ENGLISH PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following Power supply/Power cord/AC power adaptor Water warning • Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it. • Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument. • Never insert or remove an electric plug with wet hands. • (YDP-141)Use the specified adaptor (page 38) only. Using the wrong adaptor can result in damage to the instrument or overheating. Fire warning • (YDP-161)Use only the supplied power cord/plug. • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. Do not open YDP-161/141 Owner’s Manual • Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. If you notice any abnormality • This instrument contains no user-serviceable parts. Do not open the instrument or attempt to disassemble or modify the internal components in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. 4 • Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings. If any liquid such as water seeps into the instrument, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. (7)-1 • When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. Then have the device inspected by Yamaha service personnel. • • • • 1/2 The power cord or plug becomes frayed or damaged. It emits unusual smells or smoke. Some object has been dropped into the instrument. There is a sudden loss of sound during use of the instrument. Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Power supply/Power cord/AC power adaptor Handling caution • Do not connect the instrument to an electrical outlet using a multipleconnector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. • When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. • Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms. Assembly • Read carefully the attached documentation explaining the assembly process. Failure to assemble the instrument in the proper sequence might result in damage to the instrument or even injury. • Do not insert a finger or hand in any gaps on the key cover or instrument. Also take care that the key cover does not pinch your finger. ENGLISH CAUTION • Never insert or drop paper, metallic, or other objects into the gaps on the key cover, panel or keyboard. • Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. Using the bench (If included) • Do not place the bench in an unstable position where it might accidentally fall over. Location • Do not play carelessly with or stand on the bench. Using it as a tool or stepladder or for any other purpose might result in accident or injury. • Do not place the instrument in an unstable position where it might accidentally fall over. • Only one person should sit on the bench at a time, in order to prevent the possibility of accident or injury. • Before moving the instrument, remove all connected cables. • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. • If the bench screws become loose due to extensive long-term use, tighten them periodically using the included tool. Connections • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. • Be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use. YDP-141 Even when the power switch is in the “Standby” position, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet. YDP-161/141 The serial number of this product may be found on the bottom of the unit. You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. (bottom) (7)-1 2/2 YDP-161/141 Owner’s Manual 5 ENGLISH About this Owner’s Manual Thank you for purchasing the Yamaha Digital Piano! We recommend that you read this manual carefully so that you can take full advantage of the advanced and convenient functions of your new digital piano. We also recommend that you keep this manual in a safe, convenient place for future reference. The following instructional materials come with your digital piano Included Documents Owner’s Manual (this book) Quick Operation Guide (separate sheet) This Guide explains detailed operation of the functions assigned to the buttons and keyboard. Online Materials (Downloadable from the web) The following instructional materials are available for downloading from the Yamaha Manual Library. Access the Yamaha Manual Library, then enter your model name (YDP-161, for example) in the Model Name area to search the manuals. Yamaha Manual Library http://www.yamaha.co.jp/manual/ Data List The Data List contains MIDI related information, such as the MIDI Data Format and MIDI Implementation chart. MIDI Basics (only in English, French, German and Spanish) If you want to know more about MIDI and how to use it, refer to this introductory book. NOTICE To avoid the possibility of damage to the product, data or other property, follow the notices below. ■ Handling and Maintenance • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise. • Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components. • Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. • When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. • During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth. ■ Saving data Saved data may be lost due to malfunction or incorrect operation. Save important data to external device such as a computer. Information ■ About copyrights • Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. • This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others' copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON'T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES. ■ About functions/data bundled with the instrument • Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original. ■ About this manual • The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument. • Windows is a registered trademark of Microsoft(R) Corporation in the United States and other countries. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. 6 YDP-161/141 Owner’s Manual Introduction Recording Your Performance .............. 23 Recording Your Performance ....................................... 23 About this Owner’s Manual.................... 6 ENGLISH Table of Contents Playing Back Recorded Performance Data.................... 25 Erasing Recorded Performance Data ............................ 25 Table of Contents ................................... 7 Features .................................................. 8 Listening to a Specified Part / Practicing a One-Hand Part ................. 26 Accessories.............................................. 8 Connecting MIDI Instruments ............. 27 About MIDI ................................................................. 27 Panel Controls and Terminals ................ 9 MIDI’s Capability......................................................... 27 Connecting the Digital Piano to a Computer............... 28 Before Using the Digital Piano............. 10 Key Cover.................................................................... 10 Music Rest ................................................................... 10 Turning the Power On................................................. 11 Setting the Volume...................................................... 12 Using Headphones ...................................................... 12 Transmitting Song Data between the Computer and the Digital Piano................................................... 28 Backing up Data and Initializing the Settings............... 29 MIDI Functions..................................... 30 MIDI Transmit/Receive Channel Selection.................... 30 Local Control ON/OFF................................................. 30 Program Change ON/OFF........................................... 31 Reference Listening to the Demo Songs............... 13 Listening to 50 Piano Preset Songs...... 14 Listening to Songs Loaded from the Computer .............................. 15 Control Change ON/OFF ............................................ 31 Troubleshooting................................... 32 Options................................................. 32 Keyboard Stand Assembly ................... 33 INDEX ................................................... 37 Selecting & Playing Voices ................... 16 Selecting Voices........................................................... 16 Using the Pedals .......................................................... 17 Damper Resonance (YDP-161)..................................... 17 Adding Variations to the Sound – Reverb ..................... 18 Appendix Specifications ....................................... 38 Layering Two Voices (Dual mode)................................ 19 Transposition ............................................................... 20 Fine-tuning the Pitch ................................................... 20 Using the Metronome ................................................. 21 Adjusting the Keyboard Touch (Touch Sensitivity)........ 22 YDP-161/141 Owner’s Manual 7 ENGLISH Features ■ AWM Dynamic Stereo Sampling The Yamaha YDP-161/141 digital piano offers a rich and versatile range of sounds, which are created using Yamaha’s proprietary sampling tone-generation system, “AWM Dynamic Stereo Sampling.” The AWM (Advanced Wave Memory) is a sampling system which creates sound close to that of an acoustic instrument by using digital technology to record the instrument sound and applying high-quality digital filter technology to the recorded audio samples. The waveform of the sound created by playing the key of an acoustic piano differs depending on the playing strength from pianissimo to fortissimo. The AWM Dynamic Stereo Sampling can produce such dynamic nuances by recording samples of various playing strengths. The greater the number of samples used, the higher the expressive quality and potential becomes. ■ GH (Graded Hammer) keyboard and GHS (Graded Hammer Standard) keyboard A special Graded Hammer keyboard on the YDP-161, and Graded Hammer Standard keyboard on the YDP141, feature graded key weight and response throughout the keyboard range. They respond to a heavier touch in the low range of the keyboard and a lighter touch in the higher range of the keyboard, thus providing natural grand-piano type playability. The Graded Hammer keyboard also offers superb playability for tremolo and other repetitive-striking techniques. ■ Useful function for practicing Your digital piano features a Part Cancel Function. You can record your left-hand and right-hand parts, and then play them separately; left- and right-hand part. You can also practice a one-hand part while playing the otherhand part from one of the 50 preset songs. A built-in metronome is a convenient practice tool to help you develop accurate timing. Accessories ❏ Owner’s Manual (this book) ❏ Bench*2 ❏ Quick Operation Guide (separate sheet) ❏ AC Power cord (YDP-161) ❏ “50 Greats for the Piano” (music book) ❏ AC Power adaptor (YDP-141)*2 ❏ My Yamaha Product User Registration*1 *1 The PRODUCT ID on the sheet will be needed when you fill out the User Registration form. *2 Included or optional depending on locale. ■ Tuning Unlike an acoustic piano, this instrument does not need to be tuned. It always stays perfectly in tune. ■ Transporting If you move to another location, you can transport this instrument along with your other belongings. You can move the unit as it is (assembled) or you can disassemble the unit before moving. Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the instrument to excessive vibration or shock. 8 YDP-161/141 Owner’s Manual ENGLISH Panel Controls and Terminals 1 2 9 3 4 5 6 # $ 7 ) YDP-161 OUT ] switch ............................................ page 11 Power switch(YDP-161) / Standby/On switch(YDP-141) This switch turns the power to the unit on ( (YDP-161), standby (YDP-141) ( ) or off ). 2 [DEMO/SONG] button .......................... page 13 Listen to the playback of a demo song for each voice and 50 piano preset songs. 3 [PIANO/VOICE] button ......................... page 16 This button enables you to select any voice from10 (YDP-161) or 6 (YDP-141) voices. You can also layer two voices, or select a type of reverb. 4 [METRONOME] button......................... page 21 Control the metronome functions. 5 [+ R], [– L] buttons ..................page 13, 16, 23 These buttons enable you to select a preset song to play back. They also enable you to change the voice or tempo. During song playback, pressing the [+ R] or [– L] button while holding down the [PLAY] button will toggle a part in the song on or off. 6 [REC] button ......................................... page 23 Record your performance. IN ! Front (keyboard side) 1 [ PEDAL MIDI @ Left (lower key side) Rear side Right (higher key side) PHONES 8 # YDP-141 Front (keyboard side) 7 [PLAY] button ........................................page 25 Play back your recorded performance. 8 [MASTER VOLUME] control.................page 12 Adjust the volume level using this control. 9 [FUNCTION] ...................................page 20, 30 While holding down the [DEMO/SONG] and [PIANO/ VOICE] buttons, press the specified keys to set MIDI or Transpose parameters. ) [PHONES] jack ......................................page 12 A set of standard stereo headphones can be plugged in here for private practice. ! MIDI [IN] [OUT] terminals .....................page 27 Connect a MIDI device to this connector to use various MIDI functions. @ [PEDAL] jack .........................................page 35 Connect the pedal cord. # [AC IN] (YDP-161), DC IN (YDP-141) jack ............................page 35 (YDP-161) Connect the included power cord here. (YDP-141) Connect the included power adaptor here. $ Pedals ....................................................page 17 Use these pedals when you want notes to sustain longer or to sound softer and round. YDP-161/141 Owner’s Manual 9 ENGLISH Before Using the Digital Piano Key Cover To open the key cover: Lift the cover slightly, then push and slide it open. To close the key cover: Slide the cover toward you and gently lower the cover over the keys. CAUTION Be careful to avoid catching your fingers when opening or closing the cover. CAUTION • Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to avoid catching fingers (yours or others, especially children’s) between the cover and main unit. • Do not place objects, such as a piece of metal or paper, on top of the key cover. Small objects placed on the key cover may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric shock, short circuit, fire or other serious damage to the instrument. If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. Music Rest To raise the music rest: 1 Pull the music rest up and toward yourself as far as it will go. 2 Flip down the two metal supports at the left and right on the rear of the music rest. 3 Lower the music rest so that it rests on the metal supports. To lower the music rest: 1 Pull the music rest toward yourself as far as it will go. 2 Raise the two metal supports (at the rear of the music rest). 3 Gently lower the music rest backward until it is all the way down. CAUTION • Do not try to use the music rest in a half-raised position. When lowering the music rest, do not release your hands from the music rest until it is all the way down. 10 YDP-161/141 Owner’s Manual Before Using the Digital Piano 1 2 3 4 Make sure that the [ ] switch is turned off. Make sure that the power cord is connected to the rear panel connector (page 35). Insert the plug on the other end of the power cord into a standard AC outlet. Press the [ ENGLISH Turning the Power On ] switch on the right end of the keyboard to turn on the power to the unit. The power indicator located below the left end of the keyboard lights up. [ ] switch (YDP-161) Power switch (YDP-141) Standby/On switch Power indicator Press the [ ] switch again to turn off the power to the unit. The power indicator turns off. WARNING (YDP-161) • Make sure your digital piano is rated for the AC voltage supplied in the area in which the piano will be used. (The voltage rating appears on the name plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. Connecting the unit to an inappropriate AC supply can seriously damage the internal circuitry and may even pose a shock hazard! • Use only the AC power cord supplied with the instrument. If the supplied power cord is lost or damaged and needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard! • The type of AC power cord provided with the instrument may be different depending on the country in which the instrument was purchased. (In some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.) Do NOT modify the plug provided with the instrument. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. WARNING (YDP-141) • Be sure to use an appropriate AC outlet. • Be sure to use a specified power adaptor. Using a different power adaptor may cause malfunction, overheating, or fire. CAUTION (YDP-161/141) • A small amount of electrical current remains even after the [ ] switch has been turned off. • If you plan not to use the instrument for an extended period of time, or if there is a possibility of lightning, be sure to unplug the instrument from the AC outlet. YDP-161/141 Owner’s Manual 11 Before Using the Digital Piano Setting the Volume ENGLISH When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level. The level decreases. The level increases. CAUTION • Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged. Using Headphones Connect a pair of headphones to one of the [PHONES] jacks. Two [PHONES] jacks are provided. You can connect two sets of standard stereo headphones. (If you are using only one pair of headphones, you can plug them into either jack.) The speakers are automatically shut off when a plug is inserted into this jack. CAUTION Do not listen to the instrument at a high volume level through headphones for a long period of time, or your hearing may be damaged. You can hang the headphones on this instrument. Refer to “Keyboard Stand Assembly” on page 36 for instructions on installing the headphone hanger. Bottom of the keyboard PHONES Using the headphone hanger (for YDP-161 only) NOTICE Do not hang anything other than the headphones on the hanger. Otherwise, this instrument or the hanger may be damaged. Standard stereo phone plug 12 YDP-161/141 Owner’s Manual Demo songs are provided that effectively demonstrate each of this instrument’s voices. 1 Press the [DEMO/SONG] button to start playback. The [PLAY] button indicator lights up, and the demo song for the currently-selected voice starts playing. For more information on how to adjust the tempo of the demo song playback, see page 21. Starting with the selected song, the playback of the demo songs will continue in the following sequence: other voice demo songs, followed by 50 piano preset songs, and any songs loaded from the computer. The sequence then returns to the first demo song and repeats until you stop it. The demo songs will not be transmitted via MIDI. Selecting a demo song. Demo songs cannot be used with the Part select function. ENGLISH Listening to the Demo Songs While a demo song is playing, press the [+ R] or [– L] button to select and play the next or previous demo song. If you wish to select a particular demo song from 10 (YDP-161) or 6 (YDP-141) voice demo songs, press and hold down the [DEMO/SONG] button, then press one of the C1–A1 (YDP-161) or C1–F1 (YDP-141) keys. The lowest key 2 C1 F1 A1 Press the [DEMO/SONG] or [PLAY] button to stop playback. The [PLAY] button indicator turns off. Demo songs YDP-161 Key Voice Name C1  C1 Grand Piano 1 D1  D1 E1 Harpsichord 1 F1 YDP-141 Key Title Voice Name Grand Piano 1 Grand Piano 2 C1  C1 Grand Piano 2 Original Original E.Piano 1 D1 E.Piano Original Original Original Original Concerto a cembalo obbligato, 2 violini, viola e continuo No.7, BWV.1058 J.S.Bach Harpsichord 2 Gigue, Französische Suiten Nr.5, BWV.816 J.S.Bach  F1 Vibraphone Original Original G1 Church Organ 1 Herr Christ, der ein'ge Gottes-Sohn, BWV.601 J.S.Bach  G1 Church Organ 2 Triosonate Nr.6, BWV.530 J.S.Bach A1 Strings Original Original E.Piano 2  D1 E1 F1 Harpsichord Church Organ Strings Salut d'amour, op.12 Composer E. Elagr “Original” songs are Yamaha originals (©2010 Yamaha Corporation). Demo songs excluding “Original” songs are re-arranged excerpts from the original compositions. YDP-161/141 Owner’s Manual 13 ENGLISH Listening to 50 Piano Preset Songs This digital piano provides performance data for 50 piano songs as well as voice demo songs. You can simply listen to these songs. You can also refer to the included “50 Greats for the Piano” that contains scores for 50 piano preset songs. 1 2 Pick the number of the song that you want to play back from the included “50 Greats for the piano.” Song:  The number of each piano preset song is assigned to the C2–C 6 keys. On this instrument, performance data is called a “Song.” This includes demo songs and 50 piano preset tunes. While holding down the [DEMO/SONG] button, press one of  the C2–C 6 keys to select a song to play back. The [PLAY], [+ R] and [– L] button indicators light up, and the selected piano song starts playing. Turning part playback on and off Starting with the selected song, the playback of the piano preset songs will continue in the following sequence: other piano preset songs, followed by songs loaded from a computer (if any), and then voice demo songs. The sequence then returns to the first piano preset song and repeats until you stop it. The 50 preset songs feature independent left-hand and right-hand parts. You can focus on practicing one of the parts on the keyboard while playing back only the other part.(page 26) To play all preset songs and songs loaded from the computer (if any) consecutively in sequence, hold down the [DEMO/SONG] button, and press the D6 key. 1st song 10th song C2 20th song C3 C4 30th song 40th song C5  50th song(C 6) Consecutive playback(D6) The highest key(C7) While a song is playing, press the [+ R] or [– L] button to change to the next or previous song. 3 Press the [DEMO/SONG] or [PLAY] button to stop playback. The [PLAY], [+ R] and [– L] button indicators turn off. You can play the keyboard along with the preset song. You can change the voice playing on the keyboard. For more information on how to adjust the tempo of the preset song playback, see page 21. The default tempo is automatically selected whenever a new preset song is selected, and when a new preset song begins playback. When you select a different song (or a different song is selected during chained playback), an appropriate reverb type will be selected accordingly. The 50 piano preset songs will not be transmitted via MIDI. 14 YDP-161/141 Owner’s Manual You can transfer song data from your computer to this instrument and play back the songs. (See page 28 for more information on loading song data from the computer.) 1 While holding down the [DEMO/SONG] button, press one of  the D 6–C7 keys to select a song to play back.  Song numbers (1 through 10) are assigned to the D 6–C7 keys (see the illustration below). The [PLAY], [+ R] and [– L] button indicator lights up, and the selected song starts playing.Starting with the selected song, the playback of the songs loaded from the computer will continue in the following sequence: any other songs loaded from the computer, followed by demo songs, and 50 piano preset songs. The sequence then returns to the first songs loaded from the computer and repeats until you stop it. 1st song  D6 You can load up to 10 songs or up to 845 KB of data from the computer. ENGLISH Listening to Songs Loaded from the Computer Use the following table to write down the song titles you loaded from the computer. Key  D6 Song title E6 10th song F6  F6 G6  G6 C7(The highest key) While a song is playing, press the [+ R] or [– L] button to change to the next or previous song. A6  A6 B6 C7 2 Press the [DEMO/SONG] or [PLAY] button to stop playback. Selecting a Song Playback Channel If a song loaded from the computer uses a voice that is not supported by this instrument, the originally-assigned voice may not be reproduced accurately. In this case, switching the song playback channel from “All” to “1 + 2” may improve the tone to more natural sound. Turning part playback on and off You can focus on practicing one of the parts on the keyboard while playing back only the other part.(page 26) Selecting 1 + 2 song playback channels: Default setting: While pressing and holding down the [DEMO/SONG] button and the [PIANO/ VOICE] button simultaneously, press the C7 key. Channels 1+2 Channels 1 + 2 will produce the sound. The “Default setting” refers to the factory setting obtained when you turn on the power to this instrument for the first time. C7 To adjust the tempo of the song playback, see page 21. The highest key Selecting all song playback channels: While pressing and holding down the [DEMO/SONG] button and the [PIANO/ VOICE] button simultaneously, press the B6 key. All channels 1 through 16 will produce the sound. B6 When “1&2” is selected, channels 3 – 16 will be transmitted via MIDI. When “ALL” is selected, no channel will be transmitted via MIDI. The highest key YDP-161/141 Owner’s Manual 15 ENGLISH Selecting & Playing Voices Selecting Voices Press and release the [PIANO/VOICE] button to select the Grand Piano 1 voice. Press and release the [PIANO/VOICE] button, then press the [+ R] or [– L] button to select a different voice. If you wish to select a particular voice directly, press and hold down the [PIANO/VOICE] button, then press one of the C1–A1 (YDP-161) or C1–F1 (YDP-141) keys. Turn the [MASTER VOLUME] control to adjust the volume level while playing the keyboard.  C1 The lowest key   D1 F1  G1 To understand the characteristics of various voices, listen to demo songs for each voice (page 13). Voice: On this instrument, a voice means a “tone” or “tonal color.” Selecting a voice automatically engages the best-suited reverb type and depth (page 18) for that particular voice. C1 D1 E1 F1 G1 A1 YDP-161 Key Voice Name Description C1 Grand Piano 1 Recorded samples from a full concert grand piano. Perfect for classical compositions as well as any other style that requires acoustic piano.  C1 Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music. D1 E.Piano 1 An electronic piano sound created by FM synthesis. Good for popular music.  D1 E.Piano 2 The sound of an electric piano using hammer-struck metallic “tines.” Soft tone when played lightly, and an aggressive tone when played hard. E1 Harpsichord 1 The definitive instrument for baroque music. Since the strings of a harpsichord are plucked, there is no touch response. F1  F1 Harpsichord 2 Mixes the same voice an octave higher for a more brilliant tone. Vibraphone The sound of a vibraphone played with relatively soft mallets. G1 Church Organ 1 This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music from the Baroque period.  G1 Church Organ 2 This is the organ’s full coupler sound, often associated with Bach’s “Toccata and Fugue”. A1 Strings Spacious and large-scale string ensemble. Try combining this voice with piano in DUAL mode. YDP-141 Key Description Grand Piano 1 Recorded samples from a full concert grand piano. Perfect for classical compositions as well as any other style that requires acoustic piano. C1 Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music. D1 E.Piano An electronic piano sound created by FM synthesis. Good for popular music.  D1 Harpsichord The definitive instrument for baroque music. Since the strings of a harpsichord are plucked, there is no touch response. E1 Church Organ This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music from the Baroque period. F1 Strings Spacious and large-scale string ensemble. Try combining this voice with piano in DUAL mode. C1  16 Voice Name YDP-161/141 Owner’s Manual Selecting & Playing Voices Damper (Right) pedal The damper pedal functions in the same way as a damper pedal on an acoustic piano. When the damper pedal is pressed, notes sustain longer. Releasing the pedal immediately stops (damps) any sustained notes.  The damper pedal features a half-pedal function. If the damper pedal doesn’t work, make sure that the pedal cord is properly plugged into the main unit (page 35).     When you press the damper pedal here, the notes you play before you release the pedal sustain longer. Sostenuto (Center) pedal If you play a note or chord on the keyboard and press the sostenuto pedal while the note(s) are held, those notes will sustain as long as you hold the pedal (as if the damper pedal had been pressed) but all subsequently played notes will not be sustained. This makes it possible to sustain a chord, for example, while other notes are played “staccato.” When you press the sostenuto pedal here while holding the note, the note will sustain as long as you hold the pedal. ENGLISH Using the Pedals What is the half-pedal function? This function allows the sustain length to vary depending on how far the pedal is pressed. The farther you press the pedal, the more the sound sustains. For example, if you press the damper pedal and all notes you are playing sound a bit murky and loud with too much sustain, you can release the pedal half way to subdue the sustain (murkiness) Organ and string voices will continue to sound for as long as the sostenuto pedal is depressed. Soft (Left) pedal The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not affect notes that are already playing when it is pressed. Damper Resonance (YDP-161) The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you were pressing the damper pedal and playing the keyboard. This effect is applied to the entire sound of the instrument. Turning the Damper Resonance effect on or off Default setting: ON  While holding down the [PIANO/VOICE] button, press the G 2 key to turn Damper Resonance “ON”. While holding down the [PIANO/VOICE] button, press the G2 key to turn Damper Resonance “OFF”. The lowest key G2 (Off)  G2 (On) YDP-161/141 Owner’s Manual 17 Selecting & Playing Voices ENGLISH Adding Variations to the Sound – Reverb This control enables you to select various digital reverb effects that add extra depth and expression to the sound to create a realistic acoustic ambience. Selecting a reverb type While holding down the [PIANO/VOICE] button, press one of the C2–E2 keys to select a reverb type.  C2 The lowest key  D2 C2 D2 E2 Key Reverb Type Description C2 Room This setting adds a continuous reverb effect to the sound, similar to the acoustic reverberation you would hear in a room.  C2 Hall1 For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates the natural reverberation of a small-size concert hall. D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effect simulates the natural reverberation of a large concert hall.  D2 Stage Simulates the reverb of a stage environment. E2 Off No effect is applied. Adjusting reverb depth  Adjust the reverb depth for the selected voice by pressing one of the C3–G 4 keys while holding down the [PIANO/VOICE] button. The depth range is from 0 through 20.  G 4: depth 20 The default reverb type (including OFF) and depth settings are different for each voice. Reverb depth range: 0 (no effect)-20 (maximum depth) The lowest key C3: depth 0 A4 The depth value increases as you press higher keys. While holding down the [PIANO/VOICE] button, press the A4 key to set the reverb to the depth most suitable for the selected voice. 18 YDP-161/141 Owner’s Manual Selecting & Playing Voices Layering Two Voices (Dual mode) 1 Engage Dual mode. While holding down the [PIANO/VOICE] button, press two keys in the range of C1 through A1 (YDP-161) or C1 through F1 (YDP-141) simultaneously (or press and hold down one key, then press another) to select the two desired voices. You cannot assign the same voice to Voice 1 and Voice 2 simultaneously in Dual mode. ENGLISH You can layer two voices and play them simultaneously to create a thicker and suppler sound. Refer to “Selecting Voices” (page 16) for information on the voices that are assigned to the keys. The lowest key C1 F1 A1 The voice assigned to the lower key will be designated as Voice 1, and the voice assigned to the higher key will be designated as Voice 2. Reverb in Dual mode The reverb type assigned to Voice 1 will take priority. (If the reverb assigned to Voice 1 is set to OFF, the reverb assigned to Voice 2 will be in effect.) You can make the following settings for Voices 1 and 2 in Dual mode: Setting the octave You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 independently. Depending on which voices you combine in Dual mode, the combination may sound better if one of the voices is shifted up or down an octave. While holding down the [PIANO/VOICE] button, press one of the C5–F5 keys. C5 F5 The highest key Voice 1 C5  C5 –1 D5 +1 0  D5 Voice 2 –1 E5 0 F5 +1 Setting the balance You can adjust the volume balance between two voices. For example, you can set one voice as the main voice with a louder setting, and make the other voice softer.   While holding down the [PIANO/VOICE] button, press one of the F 5–F 6 keys. A setting of “0” produces an equal balance between the two Dual mode voices. Settings below “0” increase the volume of Voice 2 in relation to Voice 1, and settings above “0” increase the volume of Voice 1 in relation to Voice 2.   F5 -6 -4 -2 C6 F6 +1 +3 +6 -5 -3 -1 0 +2 +4 +5 The highest key 2 Exit Dual mode and return to normal play mode. To return to single-voice play mode, press the [PIANO/VOICE] button. YDP-161/141 Owner’s Manual 19 Selecting & Playing Voices ENGLISH Transposition Your digital piano’s Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone intervals up to a maximum of six semitones, and lets you easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if you set the transposition amount to “5,” playing key C produces pitch F. In this way, you can play a song as though it were in C major, and this instrument will transpose it to F major. Setting the amount of transposition  While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons, press one of the F 2–  F 3 keys to set the desired amount of transposition.   F2 C3 -6 -4 -2 F3 +1 +3 Transpose: Changing the key signature. On this instrument, transposing shifts the pitch of the entire keyboard. +6 -5 -3 -1 0 +2 +4 +5 The lowest key Transpose down. Transpose up. Normal pitch. To transpose the pitch down (in semitone steps) While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons, press any key  between F 2 and B2. To transpose the pitch up (in semitone steps) While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons, press any key   between C 3 and F 3. To restore the normal pitch While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons, press the C3 key. Fine-tuning the Pitch You can fine-tune the pitch of the entire instrument. This function is useful when you play the digital piano along with other instruments or CD music. Setting the pitch To tune up (in about 0.2Hz steps): Press and hold down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, and press the [+ R] button. Hz (Hertz): This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. Setting range: To tune down (in about 0.2Hz steps): 427.0–453.0 Hz Press and hold down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, and press the [– L] button. Standard pitch: To restore standard pitch: Press and hold down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, and press the [+ R] and [– L] buttons simultaneously. 20 YDP-161/141 Owner’s Manual 440.0 Hz Selecting & Playing Voices Using the Metronome 1 ENGLISH Your digital piano features a built-in metronome (a device that keeps an accurate tempo) that is convenient for practicing. Press the [METRONOME] button to turn on the metronome. Start the metronome. Determining the time signature While holding down the [METRONOME] button, press one of the C3–F3 keys. The first beat is accented with a bell sound and the rest with clicks. Default set is 0/ 4 (C3). In this setting, clicks sound in all beats.   C3 D3 C3 D3 The highest key E3 F3 Key Time signature C3  C3 0/4 D3  D3 3/4 E3 5/4 F3 6/4 2/4 4/4 Adjusting the tempo The tempo of the metronome and preset song playback can be set from 32 to 280 beats per minute. Increasing the tempo value in steps of one: While the metronome is playing, press the [+ R] button. Alternatively, press and  hold down the [METRONOME] button, and press the C 5 key. Decreasing the tempo value in steps of one: While the metronome is playing, press the [–] button. Alternatively, press and hold down the [METRONOME] button, and press the B4 key. Increasing the tempo value in steps of ten: Press and hold down the [METRONOME] button, and press the D5 key. Decreasing the tempo value in steps of ten:  Press and hold down the [METRONOME] button, and press the A 4 key. A number is assigned to each of the following keys. While holding down the [METRONOME] button, press a sequence of C4–A4 keys to specify a three-digit number. Select a number starting from the left-most digit. For example, to set the tempo “95,” press the C4 (0), A4 (9) and F4 (5) keys in sequence.  A4  C5 METRONOME 1 3 6 8 0 2 4 5 7 9 C4 F4 A4 B4 C5 D5 The highest key YDP-161/141 Owner’s Manual 21 Selecting & Playing Voices Resetting the tempo to default: ENGLISH While the metronome is playing, press the [+ R] and [– L] buttons simultaneously. Alternatively, press and hold down the [METRONOME] button, and press the C5 key. Adjusting the volume You can change the volume of the metronome sound. To reset the tempo to default value of 120 while the metronome is stopped, press the [METRONOME], [+ R] and [– L] buttons simultaneously. Setting range: While holding down the [METRONOME] button, press one of the C1–G2 keys to determine the volume. C1 (1) ~ G2 (20) Default setting:  G 1 (10) 2 4 7 9 11 14 16 19 1 3 5 6 8 10 12 13 15 17 18 20 The lowest key C1 G2 The volume level increases as you press higher keys. 2 Press the [METRONOME] button to stop the metronome. Adjusting the Keyboard Touch (Touch Sensitivity) You can adjust the volume level, which changes depending on how fast or strong you hit the keys (keyboard touch). Select an appropriate keyboard touch for the voices, songs or your taste. (This setting does not change the weight of the keyboard.) Key Touch Sensitivity Setting A6 Fixed  A6 Soft B6 Medium C7 Hard Description Default setting: The volume level does not change at all regardless of whether you play the keyboard soft or hard. The volume level does not change much when you play the keyboard soft or hard. This is the standard piano touch response. (This is the default setting.) The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic and dramatic expression. You have to hit the keys hard to produce a loud sound. While holding down the [PIANO/VOICE] button, press one of the A6–C7 keys to select the desired touch sensitivity. A6 22 YDP-161/141 Owner’s Manual This setting is disabled with some voices, such as an organ sound. C7 B6 (Medium) Your digital piano’s recording function enables you to record your performance of one song. The recorded performance is called the “user song.” You can record up to two parts separately. For example, you can record the left-hand and right-hand parts separately. Or, you can create a duet piece by recording each part one at a time and then playing them together. Follow the steps below to record and play back your performance. ENGLISH Recording Your Performance Recording Your Performance 1 NOTICE Make all initial settings. Before you begin to record, select the voice that you want to use for recording. (See page16.) Make any other desired settings (reverb, etc.) as well. Use the [MASTER VOLUME] control to adjust the volume to a comfortable listening level. You can also use the [MASTER VOLUME] control to adjust the volume level during playback. 2 Select a part and engage Record Ready mode. Hold down the [REC] button and press the [+ R] or [– L] button for the part you want to record to engage Record Ready mode. If you press the [REC] button and play both parts without specifying the recording part, the performance will automatically be recorded to the right part ([+ R]). Recording does not actually start yet. Be careful not to erase the recorded data! When you finish recording your performance, the indicator for the part button ([+ R] and/or [– L]) lights up. Recording another performance while this indicator remains on will overwrite the existing recorded data. You cannot engage Record mode while a demo song is playing. The User song will not be transmitted via MIDI. Recording the right part ([+ R]) Recording capacity “Recording capacity” is the maximum amount of performance data that you can record. This instrument’s recording capacity is 100 KB (approximately 11,000 notes). or Recording the left part ([– L]) The [REC] button indicator and the selected part button indicator will flash at the currently-selected tempo. (It may take a moment before the indicator starts to flash.) Press the [REC] button again if you wish to cancel Record mode. Turning the playback part on and off If data has already been recorded in the [+ R] and/or [– L] part, the indicator for the part(s) will light up, and the data in the part(s) will start playing back as soon as you start recording your performance. If you do not want to hear the part playback, hold down the [PLAY] button and press the button ([+ R] or [– L]) for the part you want to mute. Its indicator will turn off. Pressing the part buttons toggles part playback on and off. YDP-161/141 Owner’s Manual 23 Recording Your Performance ENGLISH 3 Start recording. Recording starts as soon as you play the keyboard. Alternatively, press the [PLAY] button to start recording. The [REC] button indicator lights up steadily, and the indicator for the recording part flashes at the current tempo.(If data exists in the part you are not recording, the corresponding part indicator lights up.) 4 Press either the [REC] or [PLAY] button to stop recording. When recording is stopped, all indicators (for the [REC], [PLAY], [+ R] and [– L] buttons) will flash, indicating that the recorded data is being saved to the instrument. After the data is saved, the button indicator for the recorded part will light up steadily, indicating that the part now contains data. Record Ready mode will automatically be cancelled. Changing the settings for the recorded user song The initial settings (data recorded at the beginning of a song) can be changed after recording. If you wish to change the voice of the user song, before pressing the [REC] button, select a different voice. Then, simultaneously press the [REC] button and the button for the part whose initial settings you want to change. The unit enters Record mode. Without playing the keyboard, press the [REC] button again to apply the change(s) to the song. If you wish to change the tempo, do so after the unit enters Record mode. Individual Parts • Voice selection • Reverb depth • Dual voices • Damper/soft pedal depth Entire Song • Tempo • [REVERB] type (including OFF) 24 YDP-161/141 Owner’s Manual NOTICE Do not turn off the power to this instrument while it is recording the data in its internal memory (that is, while all button indicators are flashing). Otherwise, all recorded data, including the data being recorded, will be lost. If the metronome was on when you started recording, you’ll be able to keep time with the metronome while recording, but the metronome sound will not be recorded. You can save the recorded user song to a computer. You can also load the user song data from a computer and play it back on this instrument. (See page 28.) The user song is saved as a Standard MIDI file (SMF). (page 28) Recording Your Performance 1 Press the [PLAY] button. The [PLAY] button indicator and the indicator for the part that contains data light up, and the recorded part starts playing back. If the user song contains no data, pressing the [PLAY] button will not start playback. ENGLISH Playing Back Recorded Performance Data The parts can be turned on or off individually during playback. Refer to the procedure on page 26. 2 Press the [PLAY] button to stop the playback When the user song finishes playing back, this instrument automatically returns to the previous mode. To stop playback in the middle of a song, press the SONG [PLAY] button. Erasing Recorded Performance Data You can erase the entire recorded user song (including both [+ R] and [– L] part). 1 Press the [REC] button to engage Record Ready mode. The [REC] and [+ R] button indicators flash. If the left part ([– L]) contains data, [– L] button indicator lights up. 2 While holding down the [PLAY] button, press the [REC] button to engage Erase Ready mode. The [REC], [PLAY], [+ R] and [– L] button indicators flash. To cancel the erase operation, press any button whose indicator is NOT flashing (such as the [DEMO/SONG], [PIANO/VOICE] or [METRONOME] button). 3 Press the [REC], [PLAY], [+ R] or [– L] button to erase recorded performance data. The [REC], [PLAY], [+ R] and [– L] button indicators light up in turn from top to bottom. All button indicators turn off after data is erased. Erasing individual part data Hold down the [REC] button and press the [+ R] or [– L] button to engage Part Record Ready mode. (See step 2 on page 23.) Press the [PLAY] button to start recording. Without playing the keyboard, press the [PLAY] or [REC] button to stop recording. All data previously recorded for the selected part will be erased. The button indicator turn off. YDP-161/141 Owner’s Manual 25 ENGLISH Listening to a Specified Part / Practicing a One-Hand Part The following songs feature separate right- ([+ R]) and left-hand ([– L]) parts on individual channels. You can turn the right- ([+ R]) and left-hand ([– L]) parts on or off as desired, in order to practice on the keyboard the corresponding part (the part that is turned off). • 50 Piano Preset Songs (page 14) The right-hand part is played by [+ R] and the left-hand part is played by [– L]. You can play back songs with each part turned on or off individually. Demo song (page 13) cannot be used with the Part select function. • Songs loaded from the computer (page 15) Channel 1 is played by [+ R] and Channel 2 is played by [– L]. You can play back songs with each channel turned on or off individually. • User songs recorded in the instrument (page 23) User songs that you recorded to the instrument using the record function. You can play back these songs with each recorded part turned on or off individually. 1 Play back the song you wish to practice. Refer to the page listed above for information on playing back songs. 2 Turn part playback on and off. While a song is playing back, hold down the [PLAY] button and press the [+ R] or [– L] button. or When you play back a song that enables you to select an individual part or channel, the indicators for the parts that contain data light up (either [+ R] or [– L], or both). You can select a part to play or mute only during song playback. Canceling the part playback setting The corresponding button indicator turns off and the corresponding part playback is muted. Pressing the buttons repeatedly toggles playback on and off. 3 Stop playback. To stop playback in the middle of a song, press the [PLAY] button. When playback is complete or stopped, the part playback setting is automatically canceled. 26 YDP-161/141 Owner’s Manual When you select a different song (or when a different song is selected during chained playback), the part or channel playback setting is automatically canceled. Your digital piano features MIDI connectors. Using the MIDI functions enables you to access a variety of musical genres. About MIDI MIDI (Musical Instrument Digital Interface) is a global format standard for performance data transmission and reception between electronic musical instruments. ENGLISH Connecting MIDI Instruments Connecting musical instruments that support MIDI via MIDI cables enables you to transfer performance and setting data between multiple musical instruments. Using MIDI, you can also achieve more advanced performances than using just a single musical instrument. Since MIDI data that can be transmitted or received varies depending on the type of MIDI devices. Please check the “MIDI Implementation Chart” on the web (please refer to “Data List” on page 6) to find out what MIDI data and commands your devices can transmit or receive. MIDI OUT IN You need a dedicated MIDI cable (optional) to make a MIDI connection. You can purchase MIDI cables at musical instrument stores. MIDI’s Capability MIDI functions enable you to transfer performance data between MIDI devices, load song data from a connected computer to your instrument, and transmit and save user song data to a computer. Transferring performance data to and from another MIDI device MIDI [OUT] connector Your digital piano You cannot transmit the voice demo songs, 50 piano preset songs, or user song from this instrument to another MIDI device. MIDI IN connector MIDI [IN] Optional MIDI OUT connector MIDI cables connector MIDI instrument Transferring MIDI data to and from a computer OUT MIDI IN connector USB port POWER UX16 (optional) Computer IN MIDI OUT connector Your digital piano For more information on the transmission and reception of song data, refer to “Transmitting Song Data between the Computer and the Digital Piano” on page 28. YDP-161/141 Owner’s Manual 27 Connecting MIDI Instruments ENGLISH Connecting the Digital Piano to a Computer Connecting the digital piano to a computer using the MIDI connectors enables you to transfer MIDI data between the piano and the computer. This connection requires that you have appropriate application software installed on the computer. Also, installing Musicsoft Downloader on the computer enables you to transfer song data between the piano and the computer. (see next section) Connecting this instrument to the USB port on a computer Use an optional USB-MIDI interface (such as a Yamaha UX16) to connect this instrument’s MIDI connectors to the computer’s USB port. You must install the USB-MIDI driver on the computer correctly so that you can control your MIDI instrument from the computer. The USB-MIDI driver is a software application that enables MIDI signals to be transmitted between the sequence software on the computer and the connected MIDI instrument. For more information, refer to the user’s manual that came with the USB interface device. Before you connect this instrument to a computer, first turn off the power to both this instrument and the computer. After you make the connections, turn on the power to the computer first, then turn on the power to this instrument. MIDI Computer OUT IN POWER When this instrument is used as a tone module, performance data with voices that are not found on this instrument will not be played correctly. Your digital piano Transmitting Song Data between the Computer and the Digital Piano In addition to the demo songs and the 50 piano preset songs stored in this instrument, you can play data for another song by loading it from a connected computer. You can save data from this instrument (such as recorded songs, etc.) to a computer, as well as load saved data back to the instrument from the computer. To be able to use this function, you must first download Musicsoft Downloader (free software) from Yamaha website at the following URL, and install it on your computer. http://music.yamaha.com/download/ Please visit the URL above to get the information on the computer system requirement for Musicsoft Downloader. For more information on transferring data, please refer to “Transferring Data Between the Computer and Instrument (for unprotected data)” in the Help file that came with Musicsoft Downloader. 28 YDP-161/141 Owner’s Manual SMF (Standard MIDI File) This file features a popular sequence format (for recording performance data). This file is sometimes called a “MIDI file.” The file extension is MID. You can play the SMF format song using music software or a sequencer that supports SMF. This instrument also supports SMF. Connecting MIDI Instruments • • • • While Musicsoft Downloader is operating, the [REC] and [PLAY] button indicators on the piano light up. Number of songs: Up to 10 songs plus one user song Maximum data size: 845KB plus 100KB (user) Data format: SMF Format 0 & 1 Backup data:10YDP.BUP (loaded from instrument) You can play the loaded songs (page 15) and loaded user song (page 25). NOTICE • Do not turn off the power to this instrument or unplug the instrument during data Before you use this instrument, close the Musicsoft Downloader window and quit the application. ENGLISH Requirements for song data that can be loaded from a computer to this instrument transmission. Otherwise, the data being transmitted will not be saved. Furthermore, flash memory operation may become unstable, causing the entire memory to be erased when you turn the power to the instrument on or off. Data you can transfer from this instrument to a computer • User song : USERSONG1.MID • Back up data : 10YDP.BUP • Song data (once it has been loaded from the computer) Do not manually change the file name by using a computer; doing so will render the file unloadable as the user song. Backing up Data and Initializing the Settings Backing up data to flash memory The following items will be stored in flash memory on this instrument. This data will be kept after you turn off the power to the instrument. Backup data Metronome volume Metronome time signature Touch sensitivity Backup data for metronome volume and time signature, touch sensitivity, and tuning is included in the file named “10YDP.BUP” and stored in this instrument. You can transfer the backup data between the instrument and a computer. Tuning Recorded performance data (user song) Song data once loaded from a computer Initializing the settings When you initialize the settings, all data, excluding the songs loaded from a computer, will be initialized and reset to the factory default settings. While holding down the C7 (the highest) key, turn on the power to the instrument. The data (excluding the data for the songs loaded from a computer) will be initialized. C7 If this instrument somehow becomes disabled or malfunctions, turn off the power to the instrument, then perform the initialization procedure. The highest key NOTICE • Do not turn off the power to this instrument while it is initializing the data in its internal memory (that is, while the [REC] and [PLAY] button indicators are flashing). • Please note that initializing the settings will erase your recorded song (user song). YDP-161/141 Owner’s Manual 29 ENGLISH MIDI Functions You can make detailed adjustments to MIDI settings. MIDI Transmit/Receive Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer. This parameter enables you to specify the channel on which the digital piano transmits or receives MIDI data. Setting the transmit channel While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C1–E2 keys. Setting the receive channel While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C4–F5 keys.  E2 D2 C1 2 4 7 9 11 14 16 1 3 5 6 8 10 1213 15 The lowest key E5 C4 F5 2 4 7 9 11 14 16 1 3 5 6 8 10 12 1315 1+2 For setting the transmit channels.  (C1–D 2) OFF For setting the receive channels. (C4–F5) ALL MIDI receive channel is ALL: A “Multi-timbre” Receive mode is available. In this mode, this instrument receives different parts from the connected MIDI device on any or all 16 MIDI channels and plays multi-channel song data. In Dual mode, Voice 1 data is transmitted on its specified channel and Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In this mode, no data is transmitted if the transmit channel is set to “OFF.” Program change and other like channel messages received will not affect this instrument’s panel settings or the notes you play on the keyboard. Data for the demo song, 50 piano preset songs and user song cannot be transmitted via MIDI. MIDI receive channel is 1+2: A “1+2” Receive mode is available. It allows simultaneous reception on channels 1 and 2 only, enabling this instrument to play 1 and 2 channel song data received from a music computer or sequencer. Local Control ON/OFF “Local Control” refers to the fact that, normally, the keyboard of this digital piano controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the keyboard of this digital piano does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI [OUT] connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI [IN] connector. While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the C6 key. Pressing the C6 key repeatedly toggles between Local Control On and Off. When Local control is turned OFF, the keyboard of this instrument does not play the internal voices. C6 Default setting: ON The highest key 30 YDP-161/141 Owner’s Manual MIDI Functions This function makes it possible to cancel program change number reception and transmission so that voices can be selected on this instrument without affecting the external MIDI device. While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons   simultaneously, press the C 6 key. Pressing the C 6 key repeatedly toggles between Program Change On and Off.  C6 ENGLISH Program Change ON/OFF Normally this instrument will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondingly-numbered voice to be selected on the corresponding channel (the keyboard voice does not change). This instrument will normally also send a MIDI program change number whenever one of its voices is selected, causing the correspondingly-numbered voice or program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers. For information on program change numbers for each voice, check the MIDI Data Format on the web (please refer to “Data List” on page 6). The highest key Control Change ON/OFF MIDI Control Change data refers to MIDI information related to performance expression (such as damper pedal information). You can transmit MIDI Control Change data from this instrument to control the operation of the connected MIDI device. (For example, if you operate this instrument’s damper pedal, this instrument will transmit MIDI Control Change data.) On the other hand, MIDI performance data of this instrument will respond to MIDI Control Change data received from the connected MIDI device. (At this time, the voice you are playing on the keyboard will not be affected by the Control Change data.) The ability to transmit and receive MIDI Control Change data is sometimes very useful. Turn Control Change On if it is convenient for you to have this capability. Turn Control Change Off if you rather prefer not to have this capability. While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the D6 key. Pressing the D6 key repeatedly toggles between Control Change On and Off. D6 The highest key Default setting: ON For information on control changes that can be used with this instrument, check the MIDI Data Format on the web (please refer to “Data List” on page 6). YDP-161/141 Owner’s Manual 31 ENGLISH Troubleshooting Problem This instrument does not turn on. Possible Cause and Solution This instrument has not been plugged in properly. (YDP-161) Securely insert the female plug into the socket on this instrument, and the male plug into a proper AC outlet (page 35). (YDP-141) Securely insert the adaptor plug into the socket on this instrument, and the adaptor plug into a proper AC outlet (page 35). Noise from the speakers or headphones is audible. The noise may be due to interference caused by the use of a mobile phone in close proximity to this instrument. Turn off the mobile phone, or move it further away from this instrument. The Master Volume is set too low. Set it to an appropriate level using the [MASTER VOLUME] control. The overall volume is low, or no sound is heard. Make sure a pair of headphones is not connected to the headphones jack (page 12). Make sure that Local Control (page 30) is ON. The damper pedal has no effect. The pedal cord may not be securely connected to the [PEDAL] jack. Be sure to insert the pedal cord all the way until the metal part of the cord plug disappears from view (page 35). The damper pedal has little effect. The damper pedal was pressed when the power was turned on. This is not a malfunction; release the pedal and press it again to reset the function. Options BC-100 Bench A comfortable bench styled to match your Yamaha digital piano. UX16 USB-MIDI interface HPE-150 Headphones 32 YDP-161/141 Owner’s Manual CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least two persons. ENGLISH Keyboard Stand Assembly • Assemble the stand on a hard and flat floor with ample space. • Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Use of incorrect screws can cause damage or malfunction of the product. • Be sure to tighten up all screws upon completing assembly of each unit. • To disassemble, reverse the assembly sequence given below. 1 Have a Phillips-head (+) screwdriver ready Attach (finger-tighten) C to D and E. Remove all parts from the package and make sure you have all of the items. D 1-2 E A D E B C C 1-3 L Bundled pedal cord inside AC Power cord (YDP-161) AC Power adaptor (YDP-141) 1-1 1-1 Untie and straighten out the bundled pedal cord. Don’t discard the vinyl tie. You will need it later in step 6. Assembly Parts 1 6 × 20 mm long screws × 4 4 4 × 20 mm tapping screws ×4 2 6 ×16 mm short screws × 4 Cord holders × 2 1-2 Align D and E with each end of C. 1-3 Attach D and E to C by finger-tightening the long screws 1 (6 × 20mm). 3 4 ×12 mm thin screws ×2 Headphone hanger set (YDP-161 only) 5 4 ×10 mm thin screws × 2 Headphone hanger YDP-161/141 Owner’s Manual 33 Keyboard Stand Assembly 2 4 Attach B. Mount A. ENGLISH Depending on the model of digital piano you purchased, the surface color of one side of B may be different from the other side. In this case, position B so that the side of the surface color similar to D and E faces the player. 2-1 Place the lower side of B on each foot of D and E, then attach the upper side to D and E. Be sure to place your hands at least 10 cm from either end of the main unit when positioning it. A At least 10 cm 2-2 Attach the top of B to D and E by finger-tightening the thin screws 3 (4 × 12mm). E 2-3 While pushing the lower part of D and E from outside, secure the bottom ends of B using two tapping screws 4 (4 × 20mm). At least 10 cm B 2-4 Insert the other two tapping screws 4 (4 × 20mm) into the other two screw holes to secure B. D 2-5 Securely tighten the screws on the top of B that were attached in Step 2-2. 2-1 CAUTION 2-2, 2-5 E • Fingers can become pinched between the main unit and the rear or side panels, be extra careful so as not to drop the main unit. • Do not hold the keyboard in any position other than the position shown in the illustration. B R Place the bottom ends of the rear panel on each foot. D 2-3 L 2-4 5 Secure A. 5-1 Adjust the position of A so that the left and right ends of A will project beyond D and E equally when seen from the front. 5-2 Secure A by tightening the short screws 2 (6 × 16mm) from the front. 2-3 5-1 3 Securely tighten the screws on C that were attached in Step 1-3. Projection of A A B C 5-2 3 34 YDP-161/141 Owner’s Manual Keyboard Stand Assembly Connect the pedal cord. 6-1 Insert the pedal cord plug to the [PEDAL] jack from the rear. 6-2 Attach the cord holders to the rear panel as shown, then clip the cord into the holders. YDP-141 7-1 Connect the DC plug of the power adaptor to the rear panel connector, and loop cord slack onto the cord hook so that the plug will not be disconnected accidentally. 6-3 Use a vinyl tie to take up any slack in the pedal cord. ENGLISH 6 6-1 6-3 6-2 CAUTION • Do not bend the cord tightly when you hang the cord on the cord hook. Otherwise, a short-circuit or fire may result. 7 Connect the power cord (for YDP-161) or power adaptor (for YDP-141) to the unit. WARNING • An improper voltage setting can cause serious damage to this instrument or result in improper operation. YDP-161 7-1 Set the voltage selector (for models that feature a voltage selector). Insert the pedal cord securely until the metal part of the cord plug disappears from view. Otherwise, the pedal may not function properly. I ID M Voltage Selector Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a “minus” screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The voltage selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected, connect the AC power cord to the [AC IN] jack and an AC wall outlet. A plug adaptor may be also provided in some areas to match the pin configuration of the AC wall outlets in your area. ■Connecting the pedal cord Insert the cord all the way until the metal part of the plug disappears from view. 7-2 Connect the plug on the power cord to the rear panel connector. 110 127 220 7-2 240 7-1 YDP-161/141 Owner’s Manual 35 Keyboard Stand Assembly ■ After completing the assembly, please check the following. Set the adjuster. ENGLISH 8 • Are there any parts left over?  Review the assembly procedure and correct any errors. • Is this instrument clear of doors and other movable Rotate the adjuster until it comes in firm contact with the floor surface. 9 Attach the headphone hanger. (for YDP-161 only) Use the included two screws 5 (4 × 10mm) to attach the hanger as shown in the illustration below. fixtures?  Move the instrument to an appropriate location. • Does this instrument make a rattling noise when you shake it?  Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals?  Turn the adjuster so that it is set firmly against the floor. • Are the pedal and power cords inserted securely into the sockets?  Check the connection. • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly PH NE O S diagrams and retighten all screws. When moving the instrument after assembly, always hold the bottom of the main unit. Key cover Top portion Do not hold here Hold here Do not hold here CAUTION Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. 36 YDP-161/141 Owner’s Manual Numerics O 50 Piano Preset Songs .............................................. 14 Options ................................................................... 32 A P AC IN ........................................................................ 9 Accessories ............................................................... 8 Adjust Keyboard Touch ............................................... 22 Reverb Depth ................................................... 18 Tempo (metronome) .......................................... 21 Volume (metronome) ......................................... 22 Part ................................................................... 23, 26 PEDAL .......................................................... 9, 17, 35 PHONES ............................................................. 9, 12 PIANO/VOICE ...................................................... 9, 16 PLAY .................................................................. 9, 25 Playing Back Recorded Performance Data .................. 25 POWER ............................................................... 9, 11 Preset songs 50 Piano Preset Songs ................................... 14 Assembly ................................................................ 33 B Backup ................................................................... 29 C Program Change ...................................................... 31 R Connecting a Computer ............................................ 28 Control Change ........................................................ 31 REC .................................................................... 9, 23 Recording your Performance ..................................... 23 Reverb .................................................................... 18 D S Damper Pedal .......................................................... 17 Damper Resonance .................................................. 17 DC IN ........................................................................ 9 Default setting .......................................................... 15 DEMO/SONG ....................................................... 9, 13 Dual mode ............................................................... 19 Half-pedal ................................................................ 17 Headphone .............................................................. 12 Headphone hanger ............................................. 12, 36 SMF ........................................................................ 28 Soft Pedal ................................................................ 17 Song ....................................................................... 13 Song Playback Channel ............................................ 15 Songs Loaded from the Computer .............................. 15 Sostenuto Pedal ....................................................... 17 Specifications .......................................................... 38 Standard MIDI File .................................................... 28 Start/Stop playback 50 Piano Preset Songs ....................................... 14 Demo Songs ..................................................... 13 Songs Loaded from the Computer ...................... 15 User Song ........................................................ 25 I T Initializing the Settings .............................................. 29 Layering Two Voices (Dual mode) .............................. 19 Local Control ........................................................... 30 Tempo .................................................................... 21 Touch Sensitivity ...................................................... 22 Transmitting Song Data ............................................. 28 Transporting .............................................................. 8 Transposition ........................................................... 20 Troubleshooting ....................................................... 32 Tuning Fine tuning of Pitch ........................................ 20 M U E Erase recorded song ................................................ 25 H K Key Cover ................................................................ 10 Keyboard Stand ....................................................... 33 L MASTER VOLUME ................................................ 9, 12 METRONOME ...................................................... 9, 21 MIDI ........................................................................ 27 MIDI cables ............................................................. 27 MIDI connectors ....................................................... 27 MIDI Data Format ....................................................... 6 MIDI Implementation Chart .......................................... 6 MIDI IN/OUT .............................................................. 9 Music Rest ............................................................... 27 Musicsoft Downloader ............................................... 28 ENGLISH INDEX User Song ............................................................... 23 V Voice ...................................................................... 16 YDP-161/141 Owner’s Manual 37 Specifications ENGLISH Specifications YDP-161 YDP-141 Width Size/Weight 1357mm [53-7/16"] Height (with music rest) 815mm [32-1/16"] (969mm [38-1/8"]) Depth 422mm [16-5/8"] Weight 42kg (92 lbs., 10oz) 37kg (81 lbs., 9oz) ESPAÑOL Number of Keys Keyboard FRANÇAIS Panel 3 Half Pedal Yes Functions Damper , Sostenuto, Soft Language English Key Cover Sliding Music Rest Yes Tone Generation Voices Polyphony Preset Songs Hard/Medium/Soft/Fixed Number of Pedals Pedal Effects Types Tone Generating Technology Number of Dynamic Levels 3 Number of Polyphony (Max.) 128 Number of Voices 10 64 6 Reverb Damper Resonance Part Dual Preset Number of Preset Songs Recording AWM Dynamic Stereo Sampling Yes Yes -Yes 10 Demo Songs, 50 Piano Preset Songs Compatible Data Format 1 Number of Tracks 2 Data Capacity One Song 100KB (approx.11,000 notes) Yes Playback Standard MIDI File (SMF) Format 0 & 1 Recording Standard MIDI File (SMF) Format 0 Metronome Overall Controls Yes Tempo Range 32 - 280 Transpose -6 - 0 - +6 Tuning Storage Storage and Connectivity Amplifiers and Speakers Connectivity 6 Demo Songs, 50 Piano Preset Songs Number of Songs Recording Function Functions GHS(Graded Hammer Standard) keyboard with matte black keytops GH(Graded Hammer) keyboard Touch Sensitivity Control Interface Cabine Type 88 Internal Memory Yes User song : One song 100KB Loading song data from a computer : Up to 10 songs; Total maximum size 845KB Headphones ×2 MIDI Amplifiers IN/OUT 20W×2 Speakers 6W×2 Oval (12 cm × 6 cm) × 2 Owner’s Manual, 50 greats for the Piano (Music Book), Quick Operation Guide, Bench (included or optional depending on locale), My Yamaha Product User Registration Accessories AC Power Cord AC Power Adaptor (included or optional depending on locale) PA-150 or an equivalent • Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. 38 YDP-161/141 Owner’s Manual Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. (weee_eu) YDP-161 YDP-141 IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: BLUE :NEUTRAL BROWN :LIVE As the colors of the wires in the mains lead of this apparatus may not correspond with the colored makings identifying the terminals in your plug proceed as follows: The wire which is colored BLUE must be connected to the terminal which is marked with the letter N or colored BLACK. OBSERVERA! Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar ansluten till vägguttaget, även om själva apparaten har stängts av. ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt, sålænge netledningen sidder i en stikkontakt, som er tændt — også selvom der er slukket på apparatets afbryder. VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko laitetta verkosta. (standby) The wire which is colored BROWN must be connected to the terminal which is marked with the letter L or colored RED. Making sure that neither core is connected to the earth terminal of the three pin plug. (2 wires) • This applies only to products distributed by YamahaKemble Music (U.K.) Ltd. YDP-161/141 Owner’s Manual 39 Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México S.A. de C.V. Calz. Javier Rojo Gómez #1149, Col. Guadalupe del Moral C.P. 09300, México, D.F., México Tel: 55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda. Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi, CEP 04534-013 Sao Paulo, SP. BRAZIL Tel: 011-3704-1377 ARGENTINA Yamaha Music Latin America, S.A. Sucursal de Argentina Olga Cossettini 1553, Piso 4 Norte Madero Este-C1107CEK Buenos Aires, Argentina Tel: 011-4119-7000 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES THE NETHERLANDS/ BELGIUM/LUXEMBOURG Yamaha Music Europe Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 ITALY Yamaha Musica Italia S.P.A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 SPAIN/PORTUGAL Yamaha Música Ibérica, S.A. Ctra. de la Coruna km. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 GREECE Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160 SWEDEN Yamaha Scandinavia AB J. A. Wettergrens Gata 1, Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 DENMARK YS Copenhagen Liaison Office Generatorvej 6A, DK-2730 Herlev, Denmark Tel: 44 92 49 00 FINLAND F-Musiikki Oy Kluuvikatu 6, P.O. Box 260, SF-00101 Helsinki, Finland Tel: 09 618511 Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanización Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, Panamá Tel: +507-269-5311 NORWAY EUROPE ICELAND THE UNITED KINGDOM/IRELAND Yamaha Music U.K. Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700 GERMANY Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 SWITZERLAND/LIECHTENSTEIN Yamaha Music Europe GmbH Branch Switzerland in Zürich Seefeldstrasse 94, 8008 Zürich, Switzerland Tel: 01-383 3990 AUSTRIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 CZECH REPUBLIC/SLOVAKIA/ HUNGARY/SLOVENIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-602039025 POLAND/LITHUANIA/LATVIA/ESTONIA Yamaha Music Europe GmbH Branch Sp.z o.o. Oddzial w Polsce ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland Tel: 022-868-07-57 Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. Norsk filial av Yamaha Scandinavia AB Grini Næringspark 1, N-1345 Østerås, Norway Tel: 67 16 77 70 Skifan HF Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland Tel: 525 5000 RUSSIA Yamaha Music (Russia) Office 4015, entrance 2, 21/5 Kuznetskii Most street, Moscow, 107996, Russia Tel: 495 626 0660 OTHER EUROPEAN COUNTRIES Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 AFRICA Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 MIDDLE EAST ASIA THE PEOPLE’S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 021-6247-2211 HONG KONG Tom Lee Music Co., Ltd. 11/F., Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 INDIA Yamaha Music India Pvt. Ltd. 5F Ambience Corporate Tower Ambience Mall Complex Ambience Island, NH-8, Gurgaon-122001, Haryana, India Tel: 0124-466-5551 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 21-520-2577 KOREA Yamaha Music Korea Ltd. 8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong, Kangnam-Gu, Seoul, Korea Tel: 080-004-0022 MALAYSIA Yamaha Music Malaysia, Sdn., Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-78030900 PHILIPPINES Yupangco Music Corporation 339 Gil J. Puyat Avenue, P.O. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 SINGAPORE Yamaha Music Asia Pte., Ltd. #03-11 A-Z Building 140 Paya Lebor Road, Singapore 409015 Tel: 747-4374 TAIWAN Yamaha KHS Music Co., Ltd. 3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C. Tel: 02-2511-8688 THAILAND Siam Music Yamaha Co., Ltd. 4, 6, 15 and 16th floor, Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan, Bangkok 10330, Thailand Tel: 02-215-2626 Owner's Manual OTHER ASIAN COUNTRIES Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317 OCEANIA AUSTRALIA Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111 NEW ZEALAND TURKEY/CYPRUS Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 OTHER COUNTRIES Yamaha Music Gulf FZE LOB 16-513, P.O.Box 17328, Jubel Ali, Dubai, United Arab Emirates Tel: +971-4-881-5868 Music Works LTD P.O.BOX 6246 Wellesley, Auckland 4680, New Zealand Tel: 9-634-0099 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-3273 EKB50 U.R.G., Pro Audio & Digital Musical Instrument Division,Yamaha Corporation © 2010 Yamaha Corporation WS59960 003APGR-02B0 Printed in Indonesia DIC565 YDP-161 YDP-141 For information on assembling the keyboard stand, refer to the instructions at the end of this manual. IMPORTANT — Check your power supply — (YDP-161) Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel. EN
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Yamaha YDP-161 de handleiding

Categorie
Muziekinstrumenten
Type
de handleiding