Artusi AO750X Handleiding

Type
Handleiding
AO750X
OPERATION MANUAL
APPLIANCES
FOR LIVING
Congratulations, you are now the proud owner of an ARTUSI cooking appliance. Thank you for purchasing ARTUSI
and welcome to the ARTUSI Family.
This instruction manual has been specially created to inform you of the full range of features your ARTUSI appliance
has to offer and serves as an introduction to getting the very best out of your ARTUSI appliance.
We present detailed information on each of the features your ARTUSI appliance consists of. Once you have read
this section you will be able to choose the most appropriate settings for your appliance when cooking different
types of food.
We ask you to read the instructions in this booklet very carefully as this will allow you to get the best results from
using your appliance. KEEP THE DOCUMENTATION OF THIS PRODUCT FOR FUTURE REFERENCE.
TO REGISTER YOUR PRODUCT WITH ARTUSI, PLEASE FILL OUT THE WARRANTY CARD AT THE END OF
THIS BOOKLET AND POST IT TO: REPLY PAID 83617
LEICHHARDT NSW 2040
FORNI SERIE 75
Installazione - Uso - Manutenzione
Installation - Use - Maintenance
FOURS SÉRIE 75
Installation - Emploi - Entretien
HORNOS SERIE 75
Instalación - Uso - Mantenimiento
OVENS SERIE 75
Installatie - Gebruik - Onderhoud
FORNOS SÉRIE 75
Instalação - Uso - Manutenção
BACKÖFEN BAUREIHE 75
Installation - Gebrauch - Wartung
IT
GB
FR
ES
NL
PT
DE
75 OVEN RANGE
IT GB FR
2
IMPORTANTE
La targhetta delle caratte-
ristiche del forno è accessi-
bile anche ad apparecchio
installato. In questa targhet-
ta, visibile aprendo la porta,
sono riportati tutti i dati di
identificazione dell’appa-
recchio a cui si dovrà fare
riferimento per richiesta di
ricambi.
Durante il funzionamento
l'apparecchio diventa molto
caldo, fare attenzione a non
toccare gli elementi riscaldanti
all'interno del forno.
DEAR
CUSTOMER,
We thank you and con-
gratulate you on your
choice.
This new carefully designed
product, manufactured with
the highest quality mate-
rials, has been carefully
tested to satisfy all your
cooking demands.
We would therefore request
you to read and follow
these easy instructions
which will allow you to
obtain excellent results
right from the start.
THE MANUFACTURER
CHÈRE CLIENTE,
CHER CLIENT,
Merci et sincères félici-
tations pour le choix que
vous avez fait.
Ce nouveau produit, conçu
avec soin et fabriqué avec
des matièrs de toute
première qualité, a été
soigneusement testé pour
satisfaire toutes vos exi-
gences d’une cuisson par-
faite.
Nous vous prions de bien
vous vouloir lire et suivre
des simples instructions,
que vous permettront d’at-
teindre d’excellents ré-
sultats dès la prémière
utilisation.
LE CONSTRUCTEUR
IMPORTANT
“Il est possible d’accéder à la
plaque des caractéristiques du
four même lorsque l’appareil
est installé. Cette plaque, que
l’on voit en ouvrant la porte,
présente toutes les données
d’identification de l’appareil
qu’il est nécessaire de citer
pour toute demande de pièces
de rechange”.
Pendant le fonctionnement,
l’appareil devient très chaud :
faire attention à ne pas toucher
les éléments chauffants à
l’intérieur du four.
IMPORTANT
The oven’s data plate is
accessible even with the
oven fully installed. The
plate is visible simply by
opening the door. Always
quote the details from it to
identify the appliance when
ordering spare parts.
The appliance becomes very
hot during use. Take great
care not to touch the heating
elements inside the oven.
CARO
CLIENTE,
sentitamente La ringrazia-
mo e ci congratuliamo per
la scelta da Lei fatta.
Questo nuovo prodotto accu-
ratamente progettato e co-
struito con materiali di
primissima qualità, è stato
accuratamente collaudato per
poter soddisfare tutte le
esigenze di una perfetta cot-
tura. La preghiamo pertanto
di leggere e rispettare le facili
istruzioni che Le
permetteranno di raggiungere
eccellenti risultati fin dalla
primissima utilizzazione.
IL COSTRUTTORE
ES NL PTDE
3
SEHR GEEHRTER
KUNDE,
wir danken Ihnen und be-
glückwünschen Sie zu Ihrer
Wahl.
Dieses neue Produkt, sorg-
fältig entworfen und mit
erstklassigen Materialien
hergestellt, wurde genau
geprüft um alle Ihre Forder-
ungen an ein perfektes Ko-
chen zu erfüllen.
Wir bitten Sie deshalb die
einfachen Anweisungen zu
lesen und einzuhalten, da-
mit von der ersten An-
wendung an ausgezeichnete
Ergebnisse erreicht werden
können.
DER HERSTELLER
ESTIMADO
CLIENTE,
Le agradecemos mucho y le
felicitamos por su elección.
Este nuevo producto,
cuidadosamente estudiado
y fabricado con materiales
de primera calidad, ha sido
probado a conciencia para
poder satisfacer todas sus
exigencias de una perfecta
cocción.
Por lo tanto le rogamos lea
y siga detenidamente estas
sencillas instrucciones que
le permitirán llegar a
resultados excelentes desde
la primera utilización.
EL FABRICANTE
GEACHTE KLANT,
wij danken u en feliciteren
u met de door u gedane
keuze.
Dit nieuwe produkt, zorg-
vuldig ontworpen en ge-
construeerd uit materialen
van de allerbeste kwaliteit,
is gedegen uitgetest om al
uw eisen voor een perfect
kookresultaat te kunnen be-
vredigen.
Wij verzoeken u daarom de
eenvoudige instructies te
lezen en te respecteren,
welke u in staat zullen
stellen om al vanaf het
eerste gebruik uitstekende
resultaten te bereiken.
DE FABRIKANT
ESTIMADO
CLIENTE,
Agradecemos, muito since-
ramente a sua escolha, e
aproveitamos a ocasião para
o felicitar.
Este novo produto, que foi
projectado com grande
atenção e construído com os
melhores materiais, foi ve-
rificado e aprovado, de
maneira a dar-lhe total
satisfação para um co-
zinhado perfeito.
Por conseguinte, pedimos
que leia e siga as instruções
que lhe permitirão alcançar
excelentes resultados desde
o início da sua utilização.
O FABRICANTE
IMPORTANTE
La placa de características
del horno se encuentra
disponible junto con el apa-
rato. En esta placa, visible
abriendo la puerta, se
muestran todos los datos de
identificación del aparato a
los que se deverá hacer
referencia para el pedido de
piezas de repuesto.
Durante el funcionamiento
el horno se calienta mucho,
no toque los elementos
calentadores situados en el
interior.
IMPORTANTE
A placa com as caracterí-
sticas do forno é acessível
também com o aparelho in-
stalado. Nesta placa, visível
abrindo a porta, estão refe-
ridos todos os dados de
identificação do aparelho
aos quais se deverá fazer
referência para pedidos de
peças de substituição.
Durante o funcionamento, o
aparelho fica muito quente.
Tenha cuidado para não
tocar nas resistências no
interior do forno.
WICHTIG
Das Typenschild mit den
technischen Merkmalen des
Backofens ist auch bei
installiertem Gerät zugäng-
lich. Auf diesem Typen-
schild, das bei Öffnen der
Ofentür sichtbar ist, sind
auch alle Kenndaten des
Geräts aufgeführt, die bei
eventuellen Ersatzteilbe-
stellungen angegeben
werden müssen.
Gerät wird während der
Benutzung sehr heiß.
Vorsicht, Heizelemente im
Ofeninnern nicht berühren.
BELANGRIJK:
“Het typeplaatje van de
oven is ook bereikbaar als
het apparaat geïnstalleerd
is. Op dit plaatje, dat u kunt
zien als u de deur opent,
staan alle identificatiege-
gevens van het apparaat,
waarnaar u dient te ver-
wijzen bij het bestellen van
vervangingsonderdelen”.
Het apparaat wordt tijdens de
werking erg warm, let erop
de verwarmingselementen in
de oven niet aan te raken.
IT GB FR
4
INDICE
Primo utilizzo pag. 6
Pannelli autopulenti 8
Rispetto dell’ambiente 10
Frontale comandi 12-14
Istruzioni di
funzionamento:
- cottura con la funzione
“convenzione” 14
- cottura con la funzione
“ventilato” 16
- cottura alla griglia 18
Termostato 20
Timer elettronico 22
Sostituzione lampada 26
Smontaggio della
porta del forno 28
PER L’INSTALLATORE
Incasso del forno 30
Allacciamento elettrico 30
Caratteristiche tecniche 34
Dimensioni 35
CONTENTS
First use pag. 6
Self-cleaning panel 8
Respect for the
environment 10
Control panel 12-14
Instructions for use:
- conventional cooking 14
- fan cooking 16
- grill cooking 18
Thermostat 20
Electronic timer 22
Light replacement 26
Removing
the oven door 28
INSTALLATION
INSTRUCTIONS
Flush fitting 30
Electrical connections 30
Techincal features 34
Dimensions 35
INDEX
Première utilisation pag. 6
Panneaux autonettoyants 8
Respect
de l’environnement 10
Panneau de commande 12-14
Instructions pour le
fonctionnement:
- cuisson conventionnelle 14
- cuissson ventilée 16
- cuissson au gril 18
Thermostat 20
Temporisateur electronique 22
Remplacement
de la lampe 26
Demontage
de la porte du four 28
POUR L’INSTALLATEUR
Encastrement du four 30
Branchement electrique 30
Caractéristiques techniques 34
Dimensions 35
THIS APPLIANCE IS CONCEIVED
FOR DOMESTIC USE ONLY. THE
MANUFACTURER SHALL NOT IN
ANY WAY BE HELD RESPONSIBLE
FOR WHATEVER INJURIES OR DAMAGES ARE
CAUSED BY INCORRECT INSTALLATION OR
BY UNSUITABLE, WRONG OR ABSURD USE.
THIS APPLIANCE IS NOT
INTENDED FOR USE BY
PERSONS (INCLUDING
CHILDREN) WITH REDUCED
PHYSICAL, SENSORY OR MENTAL
CAPABILITIES, OR LACK OF
EXPERIENCE AND KNOWLEDGE,
UNLESS THEY HAVE BEEN GIVEN
SUPERVISION OR INSTRUCTION
CONCERNING USE OF THE APPLIANCE
BY A PERSON RESPONSIBLE FOR
THEIR SAFETY. CHILDREN SHOULD BE
SUPERVISED TO ENSURE THAT THEY
DO NOT PLAY WITH THE APPLIANCE.
QUESTO PRODOTTO È STATO
CONCEPITO PER UN IMPIEGO DI
TIPO DOMESTICO. IL COSTRUTTORE
DECLINA OGNI RESPONSABILITÀ
NEL CASO DI EVENTUALI DANNI A COSE O
PERSONE DERIVANTI DA UNA NON CORRETTA
INSTALLAZIONE O DA USO IMPROPRIO,
ERRONEO OD ASSURDO.
L’APPARECCHIO NON DEVE
ESSERE USATO DA PERSONE
(COMPRESI BAMBINI) CON
RIDOTTE CAPACITÀ FISICHE,
SENSORIALI O MENTALI, O DA PERSONE
CHE MANCANO DELL’ESPERIENZA E DELLE
CONOSCENZE NECESSARIE SE NON SOTTO
LA SUPERVISIONE O DIETRO ISTRUZIONI
SULL’USO DELL’APPARECCHIO DA PARTE
DI UNA PERSONA RESPONSABILE PER LA
LORO SICUREZZA. I BAMBINI DEVONO
ESSERE CONTROLLATI PER ASSICURARSI
CHE NON GIOCHINO CON L’APPARECCHIO.
CE PRODUIT EST CONÇU
EXCLUSIVEMENT POUR USAGE
DOMESTIQUE. LE CONSTRUCTEUR
DÉCLINE TOUTE RESPONSABILITÉ
POUR DOMMAGES ET BLESSURES CAUSÉES
PAR UNE INSTALLATION INCORRECTE OU PAR
UN USAGE IMPROPRE, ERRONÉ OU ABSURDE.
L’APPAREIL NE DOIT PAS ÊTRE
UTILISÉ PAR DES PERSONNES
(ENFANTS INCLUS) DISPOSANT DE
CAPACITÉS PHYSIQUES,
SENSORIELLES OU MENTALES RÉDUITES, OU
PAR DES PERSONNES N’AYANT PAS
L’EXPÉRIENCE OU LES CONNAISSANCES
REQUISES, SI CE N’EST SOUS LA SURVEILLANCE
D’UNE PERSONNE RESPONSABLE DE LEUR
SÉCURITÉ OU APRÈS AVOIR REÇU DE CELLE-CI
LES INSTRUCTIONS RELATIVES À L’UTILISATION
DE L’APPAREIL. LES ENFANTS DOIVENT ÊTRE
SURVEILLÉS, AFIN DE S’ASSURER QU’ILS NE
JOUENT PAS AVEC L’APPAREIL.
VIETATO APPORRE CARTA
STAGNOLA, PENTOLE O SIMI-
LI A CONTATTO CON LA BASE
INTERNA DEFORNO PER CUCINARE.
L’AZIONE DEL RISCALDAMENTO DELLA
RESISTENZA INFERIORE PROVOCA IL
SURRISCALDAMENTO DELLA PARTE BAS-
SA DEL FORNO PROVOCANDONE IL DAN-
NEGGIAMENTO E ADDIRITTURA GRAVI
CONSEGUENZE (RISCHIO DI INCENDIO)
ANCHE SUL MOBILE DI SUPPORTO DEL
FORNO
DO NOT PLACE TIN FOIL, PANS
OR SIMILAR IN CONTACT WITH
THE INNER BASE OF THE OVEN
TO COOK. THE HEATING ACTION OF THE
LOWER RESISTANCE CAUSES THE LOWER
PART OF THE OVEN TO OVERHEAT, LEA-
DING TO DAMAGE AND EVEN SERIOUS
CONSEQUENCES (FIRE RISK) ALSO TO
THE UNIT IN WHICH THE OVEN IS IN-
STALLED.
INTERDICTION DE POSER
DU PAPIER ALUMINIUM, DES
CASSEROLES OU AUTRES, AU
CONTACT DE LA BASE INTERNE DU FOUR
POUR CUISINER. LE RÉCHAUFFEMENT IN-
FÉRIEUR PROVOQUE LA SURCHAUFFE DE
LA PARTIE INFÉRIEURE DU FOUR ; CELA
PEUT ENTRAÎNER SA DÉTÉRIORATION
VOIRE DES CONSÉQUENCES GRAVES (RI-
SQUE D’INCENDIE) POUR LE MEUBLE DE
SUPPORT DU FOUR.
ES NL PTDE
5
INDICE
Primera utilización pag. 7
Paneles autolimpiantes 9
Respeto por el medio
ambiente 11
Panel de control 13-15
Instrucciones de
funcionamiento:
- Cocción convencional 15
- Cocción ventilada 17
- Cocción al grill 19
Termostato 21
Temporizador
electrónico 23
Cambio de la bombilla 27
Desmontaje
de la puerta horno 29
PARA EL INSTALADOR
Encastre del horno 31
Conexión eléctrica 31
Características técnicas 34
Dimensiones 35
INHOUD
Eerste gebruik pag. 7
Zelfreinigende panelen 9
Respect voor het milieu 11
Bedieningspaneel 13-15
Werkingsinstructies:
- Traditionele bereidingen 15
- Bereiding met ventilatie 17
- Bereiding met grill 19
Thermostaat 21
Elektronische timer 23
Vervanging lampje 27
Demontage
van de ovendeur 29
VOOR DE INSTALLATEUR
Inbouw van de oven 31
Elektrische aansluiting 31
Technische kenmerken 34
Afmeting 35
INDICE
Primeira utilização pág. 7
Painéis autolimpantes 9
Respeito do ambiente 11
Painel comandos 13-15
Instruções de
funcionamento:
- Cozedura convencional 15
- Cozedura ventilada 17
- Cozedura ao gril 19
Termóstato 21
Timer electrónico 23
Substituição da lâmpada 27
Desmontagem
da porta forno 29
PARA O INSTALADOR
Encastre do forno 31
Ligação eléctrica 31
Características técnicas 34
Dimensões 35
INDEX
Erstmalige Benutzung S. 7
Selbstreinigende Platten 9
Umweltverträglichkeit 11
Bedienblende 13-15
Betriebsanleitung:
- Konventionelles Backen 15
- Umluftbacken 17
- Grillen 19
Thermostat 21
Elektronische
Zeitschaltuhr 23
Auswechslung der
Ofenbeleuchtung 27
Ausbauen der Ofentür 29
FÜR DEN INSTALLATEUR
Einbau des Backofens 31
Stromanschluß 31
Technische Daten 34
Abmessungen 35
DIT PRODUKT IS ALS
HUISHOUDELIJK APPARAAT
GEDACHT. VOOR BESCHADIGINGEN
AAN SPULLEN OF PERSONEN DIE
AAN VERKEERDE INSTALLATIE, MISBRUIK OF
VERKEERDE GEBRUIK ZIJN TE WIJTEN, NEEMT
DE FABRIKANT GEEN
VERANTWOORDELIJKHEID OP ZICH.
DIT APPARAAT IS NIET BEDOELD
VOOR GEBRUIK DOOR PERSONEN
(MET INBEGRIP VAN KINDEREN) MET
VERLAAGDE FYSIEKE, SENSORISCHE
OF MENTALE VERMOGENS, OF MET GEBREK
AAN ERVARING EN KENNIS, TENZIJ ZIJ LEIDING
OF INSTRUCTIES HEBBEN ONTVANGEN
BETREFFENDE HET GEBRUIK VAN HET APPARAAT
DOOR MIDDEL VAN EEN PERSOON DIE VOOR
HUN VEILIGHEID VERANTWOORDELIJK IS.
KINDEREN MOETEN WORDEN GECONTROLEERD
OM TE GARANDEREN DAT ZIJ NIET MET HET
APPARAAT SPELEN.
ESTE PRODUCTO FUE CONCEBIDO
PARA UN USO DE TIPO DOMÉSTICO.
EL CONSTRUCTOR DECLINA
CUALQUIER RESPONSABILIDAD EN
EL CASO DE DAÑOS EVENTUALES A COSAS O
PERSONAS QUE DERIVEN DE UNA
INSTALACIÓN INCORRECTA O DE UN USO
IMPROPIO, ERRADO O ABSURDO.
NO PUEDEN UTILIZAR EL APARATO
PERSONAS (INCLUIDOS NIÑOS) CON
CAPACIDADES FÍSICAS, SENSORIALES
O MENTALES REDUCIDAS, NI
PERSONAS QUE NO DISPONGAN DE LA
EXPERIENCIA Y DE LOS CONOCIMIENTOS
NECESARIOS, A MENOS QUE ESTÉN BAJO LA
SUPERVISIÓN DE UNA PERSONA RESPONSABLE
DE SU SEGURIDAD O HAYAN RECIBIDO LAS
INSTRUCCIONES NECESARIAS SOBRE LA
UTILIZACIÓN DEL APARATO. LOS NIÑOS TIENEN
QUE ESTAR CONTROLADOS PARA ASEGURARSE
DE QUE NO JUEGAN CON EL APARATO.
ESTE PRODUTO FOI CONCEBIDO
PARA UMA UTILIZAÇÃO DE TIPO
DOMÉSTICA. O FABRICANTE
DECLINA TODAS AS
RESPONSABILIDADES NO CASO DE EVENTUAIS
DANOS A COISAS OU PESSOAS DERIVADOS DE
UMA INSTALAÇÃO INCORRECTA OU DE USO
IMPRÓPRIO, ERRÓNEO OU ABSURDO.
O APARELHO NÃO DEVE SER USADO
POR PESSOAS (INCLUSIVE
CRIANÇAS) COM CAPACIDADES
FÍSICAS, SENSORIAIS OU MENTAIS
REDUZIDAS, OU POR PESSOAS QUE NÃO
TENHAM EXPERIÊNCIAS NEM CONHECIMENTO
NECESSÁRIO A O SER QUE SEJAM
SUPERVISIONADAS E INSTRUÍDAS, SOBRE O
USO DO APARELHO, POR UMA PESSOA
RESPONSÁVEL PELA SEGURANÇA DAS MESMAS.
AS CRIANÇAS DEVEM SER CONTROLADAS PARA
CONTROLADAS PARA SE TER CERTEZA DE QUE
NÃO BRINQUEM COM O APARELHO.
DIESES PRODUKT IST ALS
HAUSHALTSGET GEDACHT. FÜR
SCHADEN AN SACHEN ODER
PERSONEN, DIE AUF FALSCHE
INSTALLATION BZW. UNGEEIGNETEN
GEBRAUCH ODER MISSBRAUCH
ZURÜCKZUFÜHREN SIND, ÜBERNIMMT DER
HERSTELLER KEINERLEI VERANTWORTUNG.
DAS GERÄT DARF NICHT VON
PERSONEN (EINSCHLIESSLICH
KINDERN) MIT EINGESCHRÄNKTER
KÖRPERLICHER ODER GEISTLICHER
KAPAZITÄT ODER PERSONEN OHNE
ERFAHRUNG UND DIE NOTWENDIGEN
KENNTNISSE BENUTZT WERDEN, ES SEI DENN,
DIES GESCHIEHT UNTER DER AUFSICHT ODER
NACH UNTERWEISUNG IM GEBRAUCH DES
GERÄTS DURCH EINER R DEREN SICHERHEIT
VERANTWORTLICHEN PERSON. KINDER SIND
ZU BEAUFSICHTIGEN, UM SICHERZUSTELLEN,
DASS SIE NICHT MIT DEM GERÄT SPIELEN.
STANIOLPAPIER, TÖPFE ODER
ÄHNLICHES DARF NICHT IN
KONTAKT MIT DER INNEREN
BASIS DES BACKOFENS GERATEN. DAS
AUFHEIZEN DES UNTEREN WIDERSTAN-
DS FÜHRT ZU EINER ÜBERHITZUNG
DES UNTEREN TEILS DES BACKOFENS,
BESCHÄDIGT IHN UND FÜHRT SOGAR
ZU SCHWERWIEGENDEN FOLGEN (BRAN-
DRISIKO) FÜR DAS MÖBELSTÜCK, DAS
DEN BACKOFEN TRÄGT.
PROHIBIDO PONER PAPEL
DE ALUMINIO, CAZUELAS U
OTROS OBJETOS SIMILARES EN
CONTACTO CON LA BASE INTERNA DEL
HORNO PARA COCINAR. LA ACCIÓN DEL
CALENTAMIENTO DE LA RESISTENCIA
INFERIOR PROVOCA EL RECALENTA-
MIENTO DE LA PARTE BAJA DEL HORNO
DAÑÁNDOLO O INCLUSO PROVOCANDO
CONSECUENCIAS GRAVES (RIESGO DE
INCENDIO) EN EL MUEBLE DE SOPORTE
DEL HORNO.
HET IS VERBODEN ALUMINIU-
MFOLIE, PANNEN OF DERGELI-
JKE IN AANRAKING TE LATEN
KOMEN MET DE INTERNE BASIS VAN DE
OVEN OM TE KOKEN. DE VERWARMENDE
WERKING VAN DE ONDERSTE WEER-
STAND VEROORZAAKT DE OVERVERHIT-
TING VAN HET ONDERSTE GEDEELTE VAN
DE OVEN, WAARDOOR DEZE BESCHA-
DIGD KAN WORDEN EN DIT KAN ZELFS
ERNSTIGE GEVOLGEN HEBBEN (BRAN-
DGEVAAR), OOK VOOR HET MEUBEL WA-
AROP DE OVEN GEPLAATST IS.
É PROIBIDO COLOCAR PAPEL
ALUMÍNIO, TACHOS OU SIMILA-
RES EM CONTACTO COM A BASE
INTERNA DO FORNO PARA COZINHAR. A
ACÇÃO DO AQUECIMENTO DA RESISTÊN-
CIA INFERIOR PROVOCA O SUPERAQUE-
CIMENTO DA PARTE BAIXA DO FORNO
CAUSANDO-LHE DANOS E ATÉ GRAVES,
CONSEQUÊNCIAS (RISCO DE INCÊNDIO)
INCLUSIVE NO MÓVEL DE SUPORTE DO
FORNO.
IT GB FR
6
PRIMO UTILIZZO
Il forno va pulito a fondo
con acqua e sapone e ri-
sciacquato accuratamente.
Per togliere i telai laterali
nei forni con pareti lisce
procedere come illustrato in
figura.
Riscaldare il forno per circa
30 minuti alla massima
temperatura; verranno così
eliminati tutti i residui
grassi di lavorazione che
potrebbero causare sgrade-
voli odori in fase di cottura.
PREMIERE
UTILISATION
Le four doit être nettoyé à
fond à l’eau et au savon,
puis rincé méticuleusement.
Pour enlever les cadres
latéraux dans les fours à
parois lisses, procéder
comme indiqué sur la
figure.
Il convient de n’insérer la
nourriture que lorsque le
four a atteint la température
préétablie, c’est-à-dire
quand s’éteint le voyant
lumineux.
THE FIRST TIME
YOU USE THE OVEN
Clean the oven thoroughly
with soapy water and rinse
well. To remove the lateral
frames from smooth-walled
ovens, proceed as shown in
the figure.
Operate the oven for about
30 minutes at maximum
temperature to burn off all
traces of grease which
might otherwise create
unpleasant smells when
cooking.
Important:
A titre de précaution, avant
d’effectuer toute opération
de nettoyage du four quelle
qu’elle soit, débrancher
toujours la fiche de la prise
de courant ou couper la
ligne d’alimentation de
l’appareil. Veiller à ne pas
utiliser de substances acides
ou alcalines (jus de citron,
vinaigre, sel, tomate, etc.).
Ne pas utiliser de produits à
base de chlore, acides ou
abrasifs, surtout pour le
nettoyage des parois peintes.
NE PAS UTILISER DE
NETTOYEURS VAPEUR
POUR NETTOYER LE FOUR.
Important:
As a safety precaution,
before cleaning the oven,
always disconnect the plug
from the power socket or
the power cable from the
oven. Do not use acid or
alkaline substances to clean
the oven (lemon juice,
vinegar, salt, tomatoes etc.).
Do not use chlorine based
products, acids or abrasive
products to clean the
painted surfaces of the
oven.
DO NOT USE STEAM
CLEANERS TO CLEAN
THE OVEN.
Importante:
come precauzione di sicu-
rezza prima di procedere a
qualsiasi operazione di puli-
zia del forno staccare sem-
pre la spina della presa di
corrente o togliere la linea
di alimentazione dell’appa-
recchio. Inoltre evitare di u-
sare sostanze acide o alcali-
ne (succhi di limone, aceto,
sale, pomodori ecc.). Evita-
re di usare prodotti a base di
cloro, acidi o abrasivi spe-
cialmente per la pulizia del-
le pareti verniciate.
NON UTILIZZARE
PULITORI A VAPORE PER
LA PULIZIA DEL FORNO.
ES NL PTDE
7
PRIMERA
UTILIZACIÓN
El horno se limpia a fondo
con agua y jabón y se
enjuaga cuidadosamente.
Para sacar los armazones
laterales en los hornos con
paredes lisas proceder como
se ilustra en la figura.
Recalentar el horno alre-
dedor de 30 minutos a la
máxima temperatura; serán
así eliminados todos los
residuos grasos ya que po-
drían causar olores desagra-
dables durante la fase de
cocción.
ERSTMALIGE
BENUTZUNG
Der Backofen muss gründ-
lich mit Seifenwasser ge-
säubert werden. Wie auf
der Abbildung dargestellt
vorgehen, um bei den Öfen
mit glatten Wänden die
seitlichen Backbleche her-
auszunehmen.
Den Backofen für etwa 30
Minuten auf Höchsttempe-
ratur aufheizen; auf diese
Weise werden alle fett-
haltigen Bearbeitungsrück-
stände eliminiert, die beim
Backen unangenehme Ge-
rüche verursachen könnten.
EERSTE GEBRUIK
De oven moet grondig wor-
den schoongemaakt met
water en zeep, en zorgvuldig
worden afgespoeld.
Voor
het verwijderen van de zij-
frames in ovens met gladde
wanden dient u te werk te
gaan zoals op de afbeelding
wordt geïllustreerd.
Verwarm de oven ge-
durende ongeveer 30 minu-
ten op de hoogste tempe-
ratuur; zodoende worden
alle achtergebleven vetten
geëlimineerd die onaange-
name geuren zouden kunnen
veroorzaken tijdens het
bereiden van voedsel.
Importante:
como precaução de segu-
rança antes de proceder a
qualquer operação de lim-
peza do forno tirar sempre a
ficha da tomada de corrente
ou tirar a linha de alimen-
tação do aparelho. Além
disso evite usar substâncias
ácidas ou alcalinas (sumos
de limão, vinagre, etc.).
Evitar a utilização de
produtos à base de cloro,
ácidos ou abrasivos espe-
cialmente para a limpeza
das paredes envernizadas.
NÃO UTILIZE MÁQUINAS
DE LIMPEZA A VAPOR
PARA LIMPAR O FORNO.
Belangrijk:
als veiligheidmaatregel
moet altijd de stekker uit
het stopcontact worden ge-
haald of moet de voeding
van het apparaat worden
afgekoppeld alvorens de
oven te gaan schoonmaken.
Gebruik bovendien geen
zure of alkaline stoffen (ci-
troensap, azijn, zout, enz.).
Gebruik geen producten op
chloorbasis, of zure of
schurende producten, voor-
al voor het reinigen van
gelakte oppervlakken.
GEBRUIK GEEN STOOMREINIGERS
VOOR HET SCHOONMAKEN VAN
DE OVEN.
Importante:
Como precaución de segu-
ridad, antes de proceder con
cualquier operación de lim-
pieza del horno quitar
siempre el enchufe de la toma
de corriente o quitar la línea
de alimentación del aparato.
Además evitar el uso de
sustancias ácidas o alcalinas
(jugos de limón, vinagre, sal,
tomates, etc.). Evitar el uso
de productos a base de cloro,
ácidos o abrasivos especial-
mente para la limpieza de las
paredes barnizadas.
NO UTILICE GENERADORES
DE VAPOR PARA LIMPIAR EL
HORNO.
Wichtig:
Als Sicherheitsvorkehrung
muss vor jeder Reinigung
des Backofens immer das
Stromnetz abgeschaltet
werden. Zum Reinigen
dürfen keine sauren oder
alkalischen Substanzen ver-
wendet werden (Zitronen-
saft, Essig, Salz, usw.).
Chlorhaltige Produkte, so-
wie Säuren oder Scheuer-
mittel sind ebenfalls zu
vermeiden, dies gilt vor
allem für die Reinigung der
lackierten Wände.
ZUR REINIGUNG DES OFENS
KEINE DAMPFREINIGER
BENUTZEN.
PRIMEIRA
UTILIZAÇÃO
O forno deve ser limpo a
fundo com água e sabão e
depois cuidadosamente se-
cado com um pno. Para tirar
as estruturas laterais nos
fornos com paredes lisas
proceder como ilustrado na
figura.
Aquecer o forno à máxima
temperatura por cerca de 30
minutos; assim serão elimi-
nados todos os resíduos de
gorduras de fabrico que po-
deriam causar cheiros desa-
gradáveis ao cozinhar.
IT GB FR
8
PANNEAUX
AUTONETTOYANTS
CATALYTIQUES
Nos fours à parois lisses
peuvent être munis, à l’inté-
rieur, de panneaux auto-
nettoyants qui recouvrent
les parois.
Devant être accrochés sur
les parois, avant les châssis
latéraux, ces panneaux spé-
ciaux sont recouverts d’un
émail spécial catalytique
microporeux qui provoque
l’oxydation et l’évaporation
graduelles des écla-
boussures d’huile et de
graisse qui sont ainsi éli-
minées pendant les cuissons
à plus de 200° C.
Si le four n’est pas propre
après la cuisson d’aliments
très gras, le faire fonction-
ner à vide à la température
maximum pendant 60 mi-
nutes maximum.
Les panneaux autonet-
toyants ne doivent être ni
lavés, ni nettoyés avec des
produits abrasifs ou des
produits contenant des
acides ou des alcalis.
SELF-CLEANING
CATALYTIC
PANELS
Our smooth walled ovens
can be fitted with self-
cleaning panels to cover the
inside walls.
These special panels are
simply hooked on to the
walls before the side frames
are fitted. They are coated
in a special, micro-porous
catalytic enamel which
oxidises and gradually va-
porises splashes of grease
and oil at cooking tempe-
ratures above 200° C.
If the oven is not clean after
cooking fatty foods, operate
the empty oven for 60 mi-
nutes (max.) at maximum
temperature.
Never wash or clean self-
cleaning panels with abra-
sive, acid, or alkaline
products.
PANNELLI
AUTOPULENTI
CATALICI
I nostri forni con pareti li-
sce hanno la possibilità di
montare all’interno della
muffola dei pannelli auto-
pulenti che ricoprono le
pareti.
Questi speciali pannelli, da
agganciare alle pareti prima
dei telai laterali, sono rico-
perti di uno speciale smalto
catalitico microporoso che
ossida e vaporizza gradual-
mente gli schizzi di olio e
grasso eliminandoli durante
le cotture sopra i 200° C.
Se dopo una cottura di cibi
molto grassi il forno non è
pulito, farlo funzionare a
vuoto alla massima tempe-
ratura per un tempo massi-
mo di 60 minuti.
I pannelli autopulenti non
devono essere lavati pu-
liti con prodotti abrasivi o
prodotti contenenti acidi o
alcali.
ES NL PTDE
9
PAINÉIS DE
AUTOLIMPEZA
CATALÍTICOS
Os nossos fornos com pare-
des lisas têm a possibilidade
de montar dentro da mufla
painéis de autolimpeza que
recobrem as paredes.
Estes painéis especiais, que
se engancham às paredes
antes dos bastidores late-
rais, estão recobertos de um
esmalte especial catalítico
microporoso que oxida e
vaporiza gradualmente os
salpicos de óleo e gorduras
eliminando-as durante o
funcionamento acima dos
200° C.
Se depois de uma cozedura
de alimentos com muito
gordura o forno não estiver
limpo, fazê-lo funcionar a
vazio à máxima temperatu-
ra por um tempo máximo
de 60
Os painéis de autilimpeza
não devem ser lavados nem
limpos com produtos abra-
sivos ou produtos que con-
tenham na sua composição
ácidos ou álcalinos.
KATALYSERENDE
ZELFREINIGENDE
PANELEN
In onze ovens met gladde
wanden kunnen in de
moffel zelfreinigende pane-
len worden geplaatst die de
wanden afdekken.
Deze speciale panelen, die
aan de wanden moeten
worden bevestigd voordat
de zijframes worden ge-
plaatst (afb. ...), zijn bedekt
met speciale microporeuze,
katalytische lak die ge-
leidelijk de olie- en vet-
spatten oxideert en laat
verdampen, zodat ze ge-
ëlimineerd worden bij be-
reidingen boven 200° C.
Als de oven na het bereiden
van erg vet voedsel niet
schoon is, laat hem dan leeg
functioneren op de maxi-
mum temperatuur ge-
durende maximaal 60
minuten”.
De zelfreinigende panelen
mogen niet afgewassen of
schoongemaakt worden met
schurende producten of met
zuur- of alkalihoudende
producten.
PANELES
CATALÍTICOS
AUTOLIMPIANTES
Nuestros hornos provistos
de paredes lisas, tienen la
posibilidad de llevar mon-
tados en su interior paneles
autolimpiantes que
recubran dichas paredes.
Estos paneles especiales,
que se enganchan a las pa-
redes antes de los
bastidores laterales, están
recubiertos de un especial
esmalte catalítico
microporoso que oxida y
vaporiza gradualmente las
salpicaduras de aceite y
grasa eliminándolas du-
rante las cocciones por
encima de los 200° C.
Si después de una cocción
de alimentos muy grasos el
horno no está limpio,
hacerlo funcionar en vacío
a la máxima temperatura
por un tiempo máximo de
60 minutos.
Los paneles autolimpiantes
no deben ser lavados ni
limpiados con productos
abrasivos o productos que
contengan ácidos o álcali.
SELBST-
REINIGENDE
KATALYTISCHE
PLATTEN
Unsere Backöfen mit glat-
ten Wänden bieten die
Möglichkeit, in der Muffel
selbstreinigende Platten zu
montieren, mit denen die
Wände verkleidet werden.
Diese Spezialplatten, die
vor den seitlichen Rahmen
an den Wänden eingehängt
werden, sind mit einem
mikroporösen katalytischen
Speziallack bedeckt, der
oxidiert, die Öl- und Fett-
spritzer nach und nach ver-
dampfen lässt, und so bei
den Backvorgängen über
200°C eliminiert.
Sollte der Ofen nach dem
Backen sehr fetthaltiger
Speisen nicht sauber sein,
lässt man ihn maximal 60
Minuten lang leer bei
Höchsttemperatur einge-
schaltet.
Die selbstreinigenden
Platten dürfen weder ge-
waschen, noch mit
scheuernden oder säure-
haltigen bzw. alkalischen
Produkten gereinigt
werden.
IT GB FR
10
RESPECT DE
L’ENVIRONNEMENT
La documentation de cet
appareil est imprimée sur
du papier blanchi, sans
chlore ou sur du papier re-
cyclé, de façon à contribuer
à la sauvegarde de l’envi-
ronnement.
Les emballages sont conçus
pour ne pas nuire à l’en-
vironnement; ils peuvent
être récupérés ou recyclés,
car il s’agit de produits
écologiques.
Le fait de recycler l’em-
ballage permet de consom-
mer moins de matières
premières et de réduire le
volume des déchets indu-
striels et domestiques.
RESPECT FOR THE
ENVIRONMENT
The documentation pro-
vided with this oven has
been printed on chlorine
free bleached paper or re-
cycled paper to show
respect for the environ-
ment.
The packaging has also
been designed to avoid en-
vironmental impact. Pack-
aging material is ecological
and can be re-used or
recycled.
By recycling the packaging,
you will help save raw ma-
terials as well as reducing
the bulk of domestic and
industrial waste.
RISPETTO
DELL’AMBIENTE
La documentazione del pre-
sente apparecchio utilizza
carta sbiancata, senza cloro,
oppure carta riciclata allo
scopo di contribuire alla
protezione dell’ambiente
Gli imballaggi sono conce-
piti per non danneggiare
l’ambiente; possono essere
recuperati o riciclati essen-
do prodotti ecologici.
Riciclando l’imballaggio, si
contribuirà ad un risparmio
di materie prime e ad una
riduzione del volume degli
scarti industriali e dome-
stici.
ES NL PTDE
11
RESPEITO PELO
AMBIENTE
A documentação do presen-
te aparelho utiliza papel
embranquecido, sem cloro,
ou papel reciclado com a
finalidade de contribuir
para a protecção do
ambiente
As embalagens são conce-
bidas para não poluir o am-
biente; podendo ser recupe-
radas ou recicladas sendo
produtos ecológicos. Reci-
clando a embalagem,
contribuirá a uma poupança
das matérias-primas e a
uma redução do volume dos
refugos industriais e do-
mésticos.
RESPECT VOOR
HET MILIEU
De documentatie die bij dit
apparaat hoort is gemaakt
van zonder chloor gebleekt
papier of van recycling-
papier, als bijdrage tot de
milieubescherming
De verpakkingen zijn zo
ontwikkeld dat ze het
milieu niet schaden; zij
kunnen opnieuw gebruikt of
gerecycled worden, aange-
zien het om ecologische
producten gaat.
Door de verpakking te re-
cyclen wordt een bijdrage
geleverd aan de besparing
van grondstoffen en aan de
beperking van het volume
industrieel en huisvuil.
RESPETO POR EL
MEDIO AMBIENTE
La documentación de este
aparato utiliza papel
blanqueado, sin cloro, o
papel reciclado con el fin
de contribuir a la protección
del medio ambiente
Los embalajes están conce-
bidos para no dañar el
medio ambiente; pueden ser
recuperados o reciclados
siendo productos ecoló-
gicos. Reciclando el emba-
laje, se contribuirá a un
ahorro de materias primas y
a una reducción del volú-
men de los desechos in-
dustriales y domésticos.
UMWELTVER-
TRÄGLICHKEIT
Als Beitrag zum Umwelt-
schutz wurde die Doku-
mentation dieses Geräts auf
chlorfrei gebleichtes oder
Recycling-Papier gedruckt.
Bei der Verpackung wurde
auf deren Umweltverträg-
lichkeit Wert gelegt; sie
kann gesammelt oder re-
cycelt werden, da es sich
um umweltschonendes
Material handelt.
Durch Recycling der Ver-
packung wird zur Redu-
zierung des Rohstoffver-
brauchs und des Volumens
von Industrie- und Haus-
müll beigetragen.
IT GB FR
12
FONCTIONS DU
PANNEAU DE
COMMANDE
SYMBOLES DES
FONCTIONS SUR LE
COMMUTATEUR
Lampe du four (reste al-
lumée pendant la marche).
Résistance inférieure.
Régulation du thermostat de
50° C à MAX.
Résistance inférieure et su-
périeure. Réglage du ther-
mostat de 50° C à MAX.
Résistance supérieure, infé-
rieure avec ventilateur. Ré-
glage du thermostat de
50°C à MAX.
Résistance circulaire avec
ventilateur. Réglage du
thermostat de 50° C à
MAX.
Ventilateur pour décongé-
lation. Réglage du thermo-
stat à 0° C.
Résistance inférieure avec
ventilateur. Réglage du
thermostat de 50°C à MAX.
Double résistance supé-
rieure avec ventilateur (grill
à grande surface). Réglage
du thermostat de 50° à
200°C.
Double résistance supé-
rieure (grill à grande sur-
face). Réglage du thermo-
stat de 50° à 200°C.
CONTROL PANEL
FUNCTIONS
FUNCTION SYMBOLS
ON THE SELECTOR
Oven light (stays on while
oven is in use).
Bottom heating element.
Thermostat setting from
50°C to MAX.
Top and bottom heating
elements. Thermostat
setting from 50°C to MAX.
Top and bottom heating
elements with fan. Thermo-
stat setting from 50°C to
MAX.
Circular heating element
with fan. Thermostat setting
from 50°C to MAX.
Fan for defrosting. Thermo-
stat setting at 0°C.
Bottom heating element
with fan. Thermostat
setting from 50°C to MAX.
Double top heating element
with fan ( large area grill).
Thermostat setting from
50°C to 200°C.
Double top heating element
(large area grill). Thermo-
stat setting from 50°C to
200°C.
FUNZIONI
PANNELLO
COMANDI
SIMBOLI FUNZIONI SUL
COMMUTATORE
Lampada forno (rimane
sempre accesa durante il
funzionamento).
Resistenza inferiore. Rego-
lazione del termostato da
50° C a MAX.
Resistenza superiore ed in-
feriore. Regolazione del ter-
mostato da 50° C a MAX.
Resistenza superiore, infe-
riore con ventilatore. Rego-
lazione del termostato da
50° C a MAX.
Resistenza circolare con
ventilatore. Regolazione del
termostato da 50° C a MAX.
Ventilatore per scongela-
mento. Regolazione del ter-
mostato a 0° C.
Resistenza inferiore con
ventilatore. Regolazione del
termostato da 50° C a MAX.
Doppia resistenza superiore
con ventilatore (grill grande
superficie). Regolazione del
termostato da 50° a 200° C.
Doppia resistenza superiore
(grill grande superficie). Re-
golazione del termostato da
50° a 200° C.
ES NL PTDE
13
FUNÇÕES PAINEL
DE COMANDOS
SÍMBOLOS FUNÇÕES
NO COMUTADOR
Lâmpada do forno (perma-
nece sempre acesa durante
o funcionamento).
Resistência inferior. Regu -
lação do termóstato de
50°C ao MAX.
Resistência superior e infe-
rior. Regulação do termó-
stato de 50°C ao MAX.
Resistência superior, infe-
rior com ventilador. Regu-
lação do termóstato desde
50°C ao MAX.
Resistência circular com
ventilador. Regulação do
termóstato desde 50°C ao
MAX.
Ventilador para descongela-
ção. Regulação do termó-
stato a 0°C.
Resistência inferior com
ventilador. Regulação do
termóstato desde 50°C ao
MAX.
Dupla resistência superior
com ventilador (grill de
grande superfície) Regula-
ção do termóstato desde
50°C até 200° C.
Dupla resistência superior
(grill de grande superfície)
Regulação do termóstato
desde 50° até 200° C.
FUNCTIES
BEDIENINGSPANEEL
FUNCTIE-SYMBOLEN
OP DE SCHAKELAAR
Ovenverlichting (blijft altijd
branden tijdens de
werking).
Onderwarmte. Instelling
van de thermostaat van
50°C tot MAX.
Bovenwarmte en onderwarmte.
Instelling van de thermostaat
van 50°C tot MAX.
Bovenwarmte, onder-
warmte met ventilator. In-
stelling van de thermostaat
van 50°C tot MAX.
Rond verwarmingselement
met ventilator. Instelling
van de thermostaat van
50°C tot MAX.
Ventilator voor het ont-
dooien. Instelling van de
thermostaat op 0°C.
Onderste verwarmingsele-
ment met ventilator. In-
stelling van de thermostaat
van 50°C tot max.
Dubbel bovenste verwarm-
ingselement met ventilator
(grill met groot oppervlak).
Instelling van de thermo-
staat van 50°C tot 200°C.
Dubbel bovenste ver-
warmingselement (grill met
groot oppervlak). Instelling
van de thermostaat van
50°C tot 200°C.
FUNCIONES
PANEL DE
MANDOS
SÍMBOLOS DEL PANEL
DE CONTROL
Bombilla horno (queda
siempre encendida durante
el funcionamiento).
Resistencia inferior. Regu-
lación del termostato entre
50° C y MAX.
Resistencia superior e infe-
rior. Regulación del termo-
stato entre 50° C y MAX.
Resistencia superior, infe-
rior con ventilador. Regula-
ción del termostato entre
50° C y MAX.
Resistencia circular con
ventilador. Regulación del
termostato entre 50° C y
MAX.
Ventilador para desconge-
lación. Regulación del ter-
mostato a 0° C.
Resistencia inferior con
ventilador. Regulación del
termostato entre 50° C y
MAX.
Doble resistencia superior
con ventilador (grill gran
superficie). Regulación del
termostato entre 50° C y
200° C.
Doble resistencia superior
(grill gran superficie). Re-
gulación del termostato en-
tre 50° C y 200° C.
BEDIENTAFEL-
FUNKTIONEN
FUNKTIONSSYMBOLE
AM SCHALTER
Ofenbeleuchtung (bleibt
während des Betriebs
immer eingeschaltet).
Unterhitze. Einstellung des
Thermostats von 50°C auf
MAX.
Ober- und Unterhitze. Ein-
stellung des Thermostats
von 50°C auf MAX.
Oberhitze, Unterhitze mit
Ventilator. Einstellung des
Thermostats von 50°C auf
MAX.
Heißluft mit Ventilator.
Einstellung des Thermostats
von 50°C auf MAX.
Ventilatorbetrieb zum Auf-
tauen von Tiefkühlkost.
Einstellung des Thermostats
auf 0°C.
Unterhitze mit Ventilator.
Einstellung des Thermostats
von 50°C auf MAX.
Doppelte Oberhitze mit
Ventilator (großflächiger
Grill). Einstellung des
Thermostats von 50° auf
200°C.
Doppelte Oberhitze (groß-
flächiger Grill). Einstellung
des Thermostats von 50°
auf 200°C.
IT GB FR
14
INSTRUCTIONS
POUR LE
FONCTIONNEMENT
CUISSON
CONVENTIONNELLE
Système classique utilisant
la chaleur supérieure et
inférieure, indiqué pour la
cuisson d’un seul plat.
Il convient de n’insérer la
nourriture que lorsque le
four a atteint la température
préétablie, c’est-à-dire
quand s’éteint le voyant lu-
mineux.
Si, vers la fin de la cuisson,
il est nécessaire d’augmen-
ter la température inférieure
ou supérieure, il faut placer
le commutateur dans la
position adéquate. On con-
seille d’ouvrir le moins
possible la porte du four au
cours de la cuisson.
INSTRUCTIONS
FOR USE
CONVENTIONAL
COOKING
Conventional cooking uses
top and bottom heat to cook
a single dish.
Place the food in the oven
only once cooking tempe-
rature has been reached, i.e.
when the heating indicator
goes out.
If you want to increase top
or bottom temperature to-
wards the end of the cook-
ing cycle, set the tempe-
rature control to the right
position.It is advisable to
open the oven door as little
as possible during cooking.
ISTRUZIONI DI
FUNZIONAMENTO
COTTURA
CONVENZIONALE
Sistema classico che utiliz-
za calore superiore ed infe-
riore adatto per la cottura di
un solo piatto.
E’ bene che il cibo venga
inserito quando il forno ha
raggiunto la temperatura
prestabilita, cioè quando si
e’ spenta la spia luminosa.
Se verso fine cottura si
avesse necessità di incre-
mentare la temperatura in-
feriore o superiore, posi-
zionare il commutatore nel-
la rispettiva posizione. Si
consiglia di aprire il meno
possibile la porta del forno
durante la cottura.
Resistenza superiore (grill
superficie e potenza ridotta).
Regolazione del termostato
da 50° a 200° C.
Resistenza inferiore +
Resistenza circolare con
ventilatore. Regolazione del
termostato da 50° C a MAX.
Top heating element (small,
low power grill). Thermo-
stat setting from 50°C to
200°C.
Bottom heating element +
Circular heating element
with fan. Thermostat setting
from 50°C to MAX.
Résistance supérieure (grill
à grande surface et puis-
sance réduite). Réglage du
thermostat de 50° à 200°C.
Résistance inférieure +
Résistance circulaire avec
ventilateur. Réglage du
thermostat de 50° C à
MAX.
ES NL PTDE
15
INSTRUÇÕES DE
FUNCIONAMENTO
MODO
CONVENCIONAL
Modo clássico que utiliza
calor superior e inferior
adequado para cozinhar um
só prato.
É bem que os alimentos
sejam introduzidos quando
o forno atingiu a tempera-
tura preestabelecida, isto é
quando se desligou o visor
luminoso.
Se para o fim da cozedura
se tivesse a necessidade de
aumentar a temperatura in-
ferior ou superior, posi-
cionar o comutador na
respectiva posição. Acon-
selha-se de abrir o menos
possível a porta do forno
durante a cozedura
WERKINGS-
INSTRUCTIES
TRADITIONELE
BEREIDING
Klassiek systeem dat ge–
bruik maakt van boven- en
onderwarmte; geschikt voor
bereiding van één gerecht.
Het voedsel dient bij voor–
keur in de oven te worden
gezet wanneer deze al de
ingestelde temperatuur
heeft bereikt, d.w.z.
wanneer het indicatielampje
uitgegaan is.
Als de temperatuur van de
boven- of onderwarmte
tegen het einde van de
bereiding verhoogd moet
worden, dient de schakelaar
op de betreffende stand te
worden gezet. Men raadt
aan de deur van de oven zo
weinig mogelijk open te
maken tijdens de bereiding.
INSTRUCCIONES DE
FUNCIONAMIENTO
COCCIÓN
CONVENCIONAL
Sistema clásico que utiliza
calor superior e inferior
apto para la cocción de un
solo plato.
Es mejor que el alimento
sea introducido cuando el
horno haya alcanzado la
temperatura preestablecida,
es decir, cuando se haya
apagado el indicador lumi-
noso.
Si hacia el final de la
cocción fuese necesario
aumentar la temperatura
inferior o superior, girar el
mando hasta situarlo en la
posición correspondiente.
Se aconseja abrir lo menos
posible la puerta del horno
durante la cocción.
BETRIEBS-
ANLEITUNG
KONVENTIONELLES
BACKEN
Klassisches System, bei
dem Unter- oder Oberhitze
verwendet wird, die für das
Garen nur eines Gerichts
geeignet ist.
Die Speisen sollten mög-
lichst eingeschoben werden,
wenn der Backofen bereits
die vorgegebene Tempe-
ratur erreicht hat, das heißt,
nach Erlöschen der Kon-
trolllampe.
Wenn die Unter- oder Ober-
hitze gegen Ende des Back-
vorgangs erhöht werden
muss, ist der Schalter in die
jeweilige gewünschte Po-
sition zu bringen. Während
des Backvorgangs sollte die
Ofentür möglichst wenig
geöffnet werden.
Oberhitze (Grill mit redu-
zierter Fläche und
Leistung). Einstellung des
Thermostats von 50° auf
200°C.
Unterhitze + Heißluft mit
Ventilator. Einstellung des
Thermostats von 50°C auf
MAX.
Resistencia superior (grill
superficie y potencia reduci-
da). Regulación del termo-
stato entre 50° C y 200° C.
Resistencia inferior +
Resistencia circular con
ventilador. Regulación del
termostato entre 50° C y
MAX.
Bovenste verwarmingsele-
ment (grill met beperkt op-
pervlak en vermogen). In-
stelling van de thermostaat
van 50°C tot 200°C.
Onderwarmte + Rond
verwarmingselement met
ventilator. Instelling van de
thermostaat van 50°C tot
MAX.
Resistência superior (grill
superfície potência reduzi-
da). Regulação do termó-
stato desde 50° até 200° C.
Resistência inferior +
Resistência circular com
ventilador. Regulação do
termóstato desde 50°C ao
MAX.
IT GB FR
16
Le préchauffage n’est pas
nécessaire; il est toutefois
préférable d’y recourir
pour la pâtisserie.
It is not essential to pre-
heat the oven, but you are
advised to do so when
cooking pastries.
Non e’ necessario il
preriscaldamento, ma per
pasticceria e’ preferibile
farlo.
SCONGELAMENTO
Selezionando una delle fun-
zioni di cottura ventilato e
regolando il termostato sul-
lo zero, il ventilatore farà
circolare all’interno del for-
no aria fredda, favorendo
così un rapido scongela-
mento dei cibi congelati.
CUISSON
VENTILEE
Avec ce type de cuisson, un
ventilateur placé dans la
partie postérieure fait
circuler l’air chaud à
l’intérieur du four, en le
répartissant uniformément.
La cuisson se fait plus
rapidement que par rapport
à la cuisson conven-
tionnelle. Le système se
prête bien à la cuisson sur
plusieurs étages et
également d’aliments de
différents types (poisson,
viande, etc.)
FAN
COOKING
For this type of cooking a
fan positioned at the back
allows the circulation of hot
air inside the oven, creating
uniform heat. In this way
cooking is more rapid than
conventional cooking. It is
a suitable method for
cooking dishes on more
than one shelf, especially
when the food is of
different types (fish, meat
etc.)
COTTURA
VENTILATO
Con questo tipo di cottura,
un ventilatore posto nella
parte posteriore fa circolare
l’aria calda all’interno del
forno, distribuendola in mo-
do uniforme. La cottura av-
viene più rapidamente ri-
spetto alla cottura conven-
zionale. Il sistema risulta i-
doneo per la cottura su più
ripiani ed anche per cibi di
natura diversa (pesce, carne
ecc. ).
DEFROSTING
By selecting one of the fan
cooking functions and
setting
the thermostat to zero, the
fan allows cold air to
circulate
inside the oven. In this way
frozen food can be rapidly
defrosted.
DECONGELATION
En sélectionnant une des
fonctions de cuisson
ventilée et en réglant le
thermostat sur zéro, le
ventilateur fera circuler de
l’air froid à l’intérieur du
four, en provoquant de cette
manière une décongélation
rapide des aliments
congelés.
ES NL PTDE
17
Não é necessário o prévio
aquecimento, mas para a
pastelaria é preferível fazê-
lo.
Voorverwarming is niet
nodig; bij bereiding van ge-
bak echter wel.
Nota: No es necesario el
precalentamiento, pero para
la repostería es preferible
hacerlo.
Ein Vorheizen des Ofens ist
eigentlich nicht notwendig,
aber für Patisserie dennoch
empfehlenswert.
MODO
VENTILADO
Com este tipo de cozedura,
um ventilador colocado na
parte posterior faz circular
o ar quente dentro do forno,
distribuindo-o em modo
uniforme. A cozedura faz-
se mais rapidamente
respeito à cozedura
convencional.
Modo indicado para cozi-
nhar utilizando várias prate-
leiras e também para ali-
mentos de natureza diferen-
te (peixe, carne etc.).
BEREIDING MET
VENTILATIE
Bij dit type bereiding zorgt
een ventilator, die in het
bovenste gedeelte geplaatst
is, ervoor dat de warme
lucht in de oven circuleert,
waarbij deze op
gelijkmatige wijze verspreid
wordt. Het gerecht wordt
zo, ten opzichte van de
traditionele bereidingswijze,
sneller gaar. Het systeem is
geschikt voor de bereiding
op meer dan één verdieping
en ook voor verschillende
soorten voedsel (vis, vlees,
etc.)
COCCIÓN
VENTILADA:
Con este tipo de cocción,
un ventilador situado en la
parte trasera hace circular
el aire caliente dentro del
horno, distribuyéndolo de
manera uniforme. La
cocción se produce más
rápidamente con respecto a
la cocción convencional.
El sistema es idóneo para la
cocción de alimentos de
distintas clases (pescado,
carne, etc. ) también unos
encima de otros.
UMLUFT
BACKEN
Bei dieser Garart bringt der
Ventilator, der sich im
hinteren Ofenteil befindet,
heiße Umluft in den Ofen
und verteilt diese
gleichmäßig, wobei die
Garzeit geringer als beim
konventionellen Backen ist.
Diese Methode eignet sich
zum Garen auf mehreren
Einschubhöhen, auch von
Speisen unterschiedlicher
Art (Fisch, Fleisch usw.).
AUFTAUEN
Falls eine der Umluft-
funktionen ausgewählt und
der Thermostat auf Null
gestellt wird, führt der
Ventilator Kaltluft in den
Ofen und fördert das
schnelle Auftauen der
Tiefkühlkost.
DESCONGELACIÓN
Seleccionando una de las
funciones de cocción
ventilada y ajustando el
termostato sobre el cero, el
ventilador hace circular aire
frío dentro del horno,
facilitando de esta manera
una descongelación rápida
de los alimentos
congelados.
ONTDOOIEN
Door één van de functies
van de bereiding met
ventilatie te kiezen en de
thermostaat op nul te zetten,
laat de ventilator koude
lucht in de oven circuleren,
waardoor diepvriespro-
ducten snel ontdooid
worden.
DESCONGELAÇÃO
Seleccionar uma das
funções de cozedura
ventilada e regulando o
termóstato no zero, o
ventilador fará circular
dentro do forno o ar frio,
favorecendo assim uma
rápida descongelação dos
alimentos congelados.
IT GB FR
18
CUISSON AU GRIL
Type de cuisson pour griller
ou dorer les aliments.
Certains fours peuvent être
munis d’un moteur de
piques et d’une broche pour
la cuisson en rôtissoire.
La grille portant l’aliment à
cuire doit être insérée à la
1e ou 2e position du dessus.
Préchauffer pendant 5’.
Tourner le bouton du ther-
mostat sur une température
comprise entre 50° et 200°.
GRILL COOKING
Use the grill to grill or
brown foods.
Some ovens may be
equipped with an electric
motor, spit and skewers for
turning on the spit.
Place the shelf with the
food to be cooked in the 1st
or 2nd position from the
top.
Pre-heat the oven for 5 mi-
nutes. Turn the thermostat
to a temperature between
50° and 200°.
COTTURA AL GRILL
Tipo di cottura per la gri-
gliatura o doratura dei cibi.
Alcuni forni possono essere
completi di motorino asta e
spiedo per cottura al girar-
rosto.
La griglia con il cibo da
cuocere va inserito nella 1°
o 2° posizione da sopra.
Preriscaldare per 5’. Ruo-
tare la manopola del termo-
stato con temperature da
50° a 200°.
VENTILATORE DI
RAFFREDDAMENTO
Il ventilatore è posto sulla
parte superiore del forno e
crea un circolo d’aria di raf-
freddamento all’interno del
mobile e attraverso la porta
del forno stesso.
Entra in funzione quando la
parte esteriore del forno
raggiunge i 60°C ca.
Accendendo il forno e im-
postando il termostato a
200°C, il ventilatore entra
in funzione dopo 10 min ca.
Lo spegnimento del ventila-
tore avviene quando la parte
esteriore del forno scende
sotto i 60°C.
Dopo un utilizzo del forno a
200°C il ventilatore si spe-
gne dopo 30 min. ca.
COOLING FAN
The fan is positioned on the
upper part of the oven and
create a circle of cooling air
on the inside of the furni-
ture and through the door of
the oven.
It is turned on when the
temperature of the outer
shell of the oven reaches
60°C.
By switching on the oven
with the thermostat at
200°C the fan starts work-
ing after approx.10 min.
It is turned off when the
temperature of the outer
shell of the oven descends
under 60°C.
By switching off the oven
with the thermostat at
200°C the fan stops work-
ing after approx. 30 min.
VENTILATEUR DE
REFROIDISSEMENT
Le ventilateur est placé sur
la partie supérieure du four
et crée une circulation d’air
de refroidissement à l’inté-
rieur du meuble et à travers
la porte du four lui-même.
Il se met en marche quand
la partie externe du four
atteint environ 60°C.
En allumant le four et en
programmant le thermostat
sur 200°C, le ventilateur se
met en marche après 10
minutes environ.
L’extinction du ventilateur
se fait quand la partie
externe du four descend
sous 60°C.
Après une utilisation du
four à 200°C, le ventilateur
s’éteint après environ 30
minutes.
ES NL PTDE
19
MODO GRIL
Modo indicado para
grelhados ou para gratinar
alimentos.
Alguns fornos podem estar
equipados com motor e
espeto giratório para
assados ou churrasco.
Para uma utilização
correcta do Grill, inserir
sempre a grelha na ou
posição de cima no forno.
Aquecer previamente por 5
minutos. Rodar o botão do
termóstato com temperatu-
ras desde 50° até 200°.
BEREIDING MET GRILL
Type bereiding voor het
grillen of bruinen van voed-
sel.
Enkele ovens kunnen een
motortje hebben om de
stang voor bereiding aan het
spit te laten draaien.
Het rooster met het voedsel
dat bereid moet worden
moet op het 1e of 2e niveau
van bovenaf in de oven
worden geschoven.
Voorverwarmen gedurende
5 minuten. De thermo-
staatknop op temperaturen
van 50° tot 200° draaien.
COCCIÓN AL GRILL:
Tipo de cocción para asar
al grill o para dorar los
alimentos.
Nota:
Algunos hornos pueden
estar equipados con un mo-
tor giratorio y un espetón
para la cocción en el asador.
La parrilla con el alimento
a cocinar debe posicionarse
en la 1a o 2a posición de ar-
riba.
Precalentar durante 5’ y
girar el termostato hasta
situarlo a temperaturas
entre 50° y 200°C.
GRILLEN
Zum Grillen oder Bräunen
der Speisen.
Einige Backöfen sind kom-
plett mit Stabmotor und
Drehspieß für Spießbraten
ausgestattet.
Der Rost mit dem Gargut
wird in der 1. oder 2.
Schiene von oben einge-
schoben.
Den Backofen 5 Minuten
vorheizen. Den Thermostat-
Drehgriff auf Temperaturen
von 50° bis 200° drehen.
KÜHLVENTILATOR
Der Kühventilator befindet
sich auf der oberen Seite
des Backofens und dient zur
Kühlung sowohl des Ein-
baumöbels als auch der
Backofentüre.
Der Ventilator schaltet sich
selbstättig ein, wenn das
äußere Gehäuse des Back-
ofens eine Temperatur von
60°C überschreitet. Wird
der Backofen z.B. auf
200°C eingestellt, schaltet
sich die Kühlung nach etwa
10 Min ein. Der Ventilator
schaltet sich selbstättig aus,
wenn das äußere Gehäuse
des Backofens eine
Temperatur von 60°C
wieder überschreitet.
z.B. schaltet sich die Kühl-
ung nach Betrieb auf 200°C
nach etwa 30 Min. aus.
VENTILADOR DE
ENFRIAMIENTO
El ventilador está situado en
la parte superior del horno y
crea una circulación de aire
de enfriamiento dentro del
mueble y a través de la
puerta del propio horno. Se
pone en marcha cuando la
parte exterior del horno
alcanza los 60°C aprox.
Encendiendo el horno y
llevando el termostato a
200°C, el ventilador se
pone en marcha al cabo de
unos 10 minutos. El
ventilador se apaga cuando
la temperatura de la parte
exterior del horno
desciende por debajo de los
60°C. Después de utilizar el
horno a 200°C el ventilador
se apaga al cabo de unos 30
minutos.
KOELVENTILATOR
De ventilator is in het
bovenste gedeelte van de
oven geplaatst en zorgt
ervoor dat de koellucht
binnenin het inbouwmeubel
en door de deur van de oven
zelf circuleert.
Deze begint te werken
wanneer de buitenkant van
de oven ongeveer 60°C is.
Door de oven aan te zetten
en de thermostaat op 200°C
te zetten, begint de ven-
tilator na ongeveer 10 min.
te lopen. De ventilator
wordt uitgeschakeld zodra
de buitenkant van de oven
onder de 60°C daalt.
Na de oven op 200°C te
hebben gebruikt, gaat de
ventilator na ongeveer 30
min. uit.
VENTILADOR DE
ARREFECIMENTO
O ventilador está situado na
parte superior do forno e
procura um circulo de ar de
arrefecimento dentro do
móvel e através da porta do
próprio forno.
Entra em função quando a
parte exterior do forno
atinge os 60°C aprox.
Acendendo o forno e
programando o termóstato a
200°C, o ventilador entra
em função após 10 min.
aprox.
A desligação do ventilador
efectua-se quando a parte
exterior do forno baixa para
lá dos 60°C.
Depois de uma utilização
do forno a 200°C o ventila-
dor desliga-se após 30 min.
aprox.
IT GB FR
20
THERMOSTAT
Dispositif permettant de ré-
gler la température de cuis-
son la plus indiquée pour
les aliments et pouvant être
réglé de 50° à 250° C.
MINUTEUR
Signaleur acoustique de 0-
60 minutes. Tourner le
bouton dans le sens des
aiguilles d’une montre jus-
qu’à la position maximum,
puis le remettre sur le
temps désiré.
TEMPORISATEUR
Régler le bouton du com-
mutateur et du thermostat
sur la position et sur la tem-
pérature désirées.
Pour les cuissons à temps
défini, tourner le bouton
vers la droite en le réglant
sur la durée préétablie.
Tourner le bouton dans le
sens des aiguilles d’une
montre jusqu’à la position
maximum, puis le remettre
sur le temps désiré.
Ensuite, un signal sonore
indique que le temps prévu
s’est écoulé et le four cesse
de fonctionner.
Pour la cuisson à temps in-
défini, tourner le bouton
vers la gauche en le mettant
au niveau du symbole .
THERMOSTAT
Use the thermostat to set
the cooking temperature
you need. The thermostat
can be adjusted from 50° to
250° C.
ALARM TIMER
You can set this timer to
sound a buzzer after 0 to 60
minutes of cooking. First
turn the knob fully clock-
wise, then turn it back to
the desired alarm time.
COOKING TIMER
First, turn the cooking se-
lector to the required cook-
ing function, and the ther-
mostat to the desired cook-
ing temperature.
Then, to set end of cooking
time, turn the cooking timer
to the right and to the
desired time. First turn the
knob fully clockwise, then
turn it back to the desired
alarm time. A buzzer
sounds at the end of the
timed cooking period, and
the oven switches itself off.
To set only the start of
cooking, turn the cooking
timer to the left to the
symbol.
TERMOSTATO
Dispositivo che permette di
regolare la temperatura di
cottura più idonea ai cibi
cuocere e può essere rego-
lato da 50° a 250° C.
CONTAMINUTI
Segnalatore acustico da 0-
60 minuti. Si deve ruotare
la manopola in senso orario
fino alla posizione massima
per poi riportarla al tempo
desiderato.
TEMPORIZZATORE
Impostare la manopola del
commutatore e del termo-
stato nella posizione e tem-
peratura desiderata.
Per cotture a tempo definito
ruotare la manopola a destra
posizionandola nel tempo
prestabilito. Si deve ruotare
la manopola in senso orario
fino alla posizione massima
per poi riportarla al tempo
desiderato. In seguito, un
segnale acustico segnalerà
che il tempo è trascorso e il
forno cessa di funzionare.
Per cottura a tempo indefi-
nito ruotare la manopola a
sinistra portandola in corri-
spondenza del simbolo .
ES NL PTDE
21
TERMÓSTATO
Dispositivo que permite
regular a temperatura de
acordo com o tipo e forma
dos alimentos a cozinhar e
que pode ser regulado desde
50° até 250° C.
CONTADOR DE MINUTOS
Sinalizador acústico desde
0-60 minutos. Rodar no
sentido horário até à
posição máxima para
depois o levar ao tempo
desejado.
TEMPORIZADOR
Programar o botão do co-
mutador e do termóstato na
posição e temperatura dese-
jada.
Para cozinhar a tempo
definido rodar o botão para
a direita colocando-o no
tempo preestabelecido. A
seguir, um sinal acústico in-
dicará que passou o tempo e
o forno deixa de funcionar.
Rodar no sentido horário
até à posição máxima para
depois o levar ao tempo
desejado.
Para cozinhar a tempo inde-
finido rodar o botão para a
esquerda levando-o à cor-
respondência com o sím-
bolo .
THERMOSTAAT
Mechanisme waarmee de
meest geschikte bereidings-
temperatuur voor het
voedsel kan worden inge-
steld, kan worden ingesteld
tussen 50° en 250° C.
MINUTENTELLER
Geluidsalarm van 0-60 mi-
nuten. De knop moet met de
klok mee gedraaid worden
tot in de uiterste positie,
waarna hij op de gewenste
tijd kan worden gedraaid.
TIMER
Stel de knop van de schake-
laar en van de thermostaat
in de gewenste stand en op
de gewenste temperatuur.
Voor bereidingen met een
vaste bereidingstijd moet de
knop naar rechts op de ge-
wenste tijd worden ge-
draaid. De knop moet met
de klok mee gedraaid
worden tot in de uiterste po-
sitie, waarna hij op de ge-
wenste tijd kan worden
gedraaid. Vervolgens zal
een geluidssignaal waar-
schuwen dat de tijd ver-
streken is, en stopt de
werking van de oven.
Voor bereidingen zonder
vaste bereidingstijd moet
de knop naar links worden
gedraaid op het
symbool.
TERMOSTATO:
Dispositivo que permite
regular la temperatura de
cocción más idónea para los
alimentos a cocinar y
puede ser regulado desde
50° a 250° C.
MINUTERO
Indicador acústico desde 0-
60 minutos. Se debe girar el
mando en el sentido de las
agujas del reloj hasta su
posición máxima, para des-
pués colocarlo en el tiempo
deseado.
TEMPORIZADOR:
Situar el selector de po-
tencia y el termostato en la
posición y temperatura de-
seadas.
Para cocciones con tiempo
definido girar el mando a la
derecha posicionándolo en
el tiempo preestablecido. Se
debe girar el mando en
sentido horario hasta la
posición máxima para luego
volverla a colocar en el
tiempo desiderado.Después
una señal acústica indicará
que el tiempo ha trans-
currido y el horno dejará de
funcionar.
Para la cocción con tiempo
indefinido girar el mando
hacia la izquierda colocán-
dolo en correspondencia
con el símbolo .
THERMOSTAT
Temperaturregler, mit dem
die je nach Gargut geeig-
nete Gartemperatur einge-
stellt wird, und der auf
Temperaturen zwischen 50°
und 250° C eingestellt
werden kann.
KURZZEITMESSER
Alarmuhr 0-60 Minuten.
Der Drehgriff muss bis zum
Anschlag im Uhrzeigersinn
gedreht, und dann auf die
gewünschte Zeit eingestellt
werden.
ZEITSCHALTER
Den Drehgriff des Um-
schalters und des Thermo-
stats in die gewünschte
Stellung und Temperatur
drehen.
Für bestimmte Garzeiten
den Drehgriff nach rechts
drehen und auf die
vorgegebene Zeit einstellen.
Der Drehgriff muss bis zum
Anschlag im Uhrzeigersinn
gedreht, und dann auf die
gewünschte Zeit eingestellt
werden. Bei Ablauf der
eingestellten Zeit ertönt ein
Signalton und der Backofen
wird ausgeschaltet.
Für unbestimmte Garzeiten
wird der Drehgriff nach
links auf das Symbol
gedreht.
IT GB FR
22
TEMPORISATEUR
ELECTRONIQUE
A 6 TOUCHES
Réglage de l’horloge
Appuyer en même temps
sur les touches de durée
et de fin de cuisson
et agir sur les touches
+/- jusqu’au réglage de
l’heure désirée.
FONCTIONNEMENT
MANUEL
Pour les cuissons à temps
indéfini, appuyer sur la
touche Manuel .
FONCTIONNEMENT SEMI-
AUTOMATIQUE DE
DUREE DE CUISSON
Pour les cuissons à temps
défini. Appuyer sur la
touche de durée de cuisson
et, à l’aide des touches +/-,
régler le temps nécessaire
pour la cuisson. Le temps
préétabli étant écoulé, le
signal sonore retentit et le
four s’arrête. Remettre le
bouton du thermostat et du
commutateur sur la position
0, puis appuyer sur la
touche Manuel.
FONCTIONNEMENT SEMI-
AUTOMATIQUE DE FIN
DE CUISSON
Pour les cuissons à temps
défini, appuyer sur la tou-
che de fin de cuisson
et, à l’aide des touches +/-,
régler l’heure l’on veut
que le four cesse de fon-
ctionner. Le temps préétabli
étant écoulé, le signal sono-
re retentit et le four s’arrête.
Remettre le bouton du ther-
mostat et du commutateur
sur la position 0, puis ap-
puyer sur la touche Manuel.
6 KEY
ELECTRONIC
TIMER
Setting the clock
Press the duration key
and the end of cooking
key simultaneously, then
press the +/- keys to set the
time.
MANUAL OPERATION
To start cooking without
setting end of cooking time,
press the manual key .
SETTING ONLY THE
DURATION OF COOKING
IN SEMI-AUTOMATIC
MODE
To set the duration of cook-
ing, press the duration key
and press the +/- keys to set
the duration of cooking. A
buzzer sounds when the
cooking period finishes, and
the oven switches itself off.
Turn the thermostat and
selector knobs back to 0
position and press the ma-
nual key.
SETTING ONLY THE END
OF COOKING TIME IN
SEMI-AUTOMATIC MODE
To set the end of cooking
time, press the end of
cooking key and press
the +/- keys to set the time
at which you want the oven
to switch off. A buzzer
sounds when the clock
reaches the set time, and the
oven switches itself off.
Turn the thermostat and
selector knobs back to 0
position and press the
manual key.
TIMER
ELETTRONICO 6
TASTI
Regolazione dell’orologio
Premere contemporanea-
mente i tasti di durata
e fine cottura ed agire
sui tasti +/- fino all’im-
postazione dell’ora deside-
rata.
FUNZIONAMENTO
MANUALE
Per cotture a tempo indefi-
nito premere il tasto ma-
nuale .
FUNZIONAMENTO
SEMIAUTOMATICO DI
DURATA COTTURA
Per cotture a tempo defini-
to. Premere il tasto di durata
cottura ed impostare con i
tasti +/- il tempo necessario
per la cottura. Trascorso il
tempo entra in funzione il
segnale acustico ed il forno
cessa di funzionare. Ripor-
tare la manopola del termo-
stato e del commutatore in
posizione 0 quindi premere
il tasto manuale.
FUNZIONAMENTO
SEMIAUTOMATICO DI
FINE COTTURA
Per cotture a tempo definito
premere il tasto di fine
cottura e impostare
con i tasti +/- l’ora in cui si
vuole che il forno cessi di
funzionare. Trascorso il
tempo entra in funzione il
segnalatore acustico e il
forno si arresta. Riportare la
manopola del termostato e
del commutatore in posizio-
ne 0 quindi premere il tasto
manuale.
ES NL PTDE
23
TIMER
ELECTRÓNICO 6
TECLAS
Regulação do relógio
Carregar simultaneamente
nas teclas de duração e
fim cozedura e agir
sobre as teclas +/- até à
programação da hora
desejada.
FUNCIONAMENTO
MANUAL
Para cozinhar a tempo inde-
finido carregar na tecla
manual .
FUNCIONAMENTO SEMI-
AUTOMÁTICO DE
DURAÇÃO DE
COZINHADO
Para cozinhar a tempo defi-
nido. Carregar na tecla de
duração de cozinhado e pro-
gramar com as teclas +/- o
tempo necessário para o co-
zinhado. Passado o tempo
entra em função o sinal acú-
stico e o forno deixa de fun-
cionar. Tornar a levar o bo-
tão do termóstato e do comu-
tador à posição 0 em seguida
carregar na tecla manual.
FUNCIONAMENTO SEMI-
AUTOMÁTICO FIM DE
COZINHADO
Para cozinhar a tempo
definido carregar na tecla
fim de cozinhado e pro-
gramar com as teclas +/- a
hora na qual se pretende que
o forno deixe de funcionar.
Passado o tempo entra em
função o sinalizador acústico
e o forno deixa de funcionar.
Tornar a levar o botão do
termóstato e do comutador à
posição 0 em seguida
carregar na tecla manual.
ELEKTRONISCHE
TIMER 6
TOETSEN
Stellen van de klok
Druk tegelijkertijd op de
toetsen voor de duur
en einde bereiding en
bedien de toetsen +/- totdat
de gewenste tijd is
ingesteld.
HANDBEDIENING
Druk op de handbedienings-
toets voor bereidingen
zonder vaste bereidingstijd
HALFAUTOMATISCHE
BEDIENING VAN DE
BEREIDINGSDUUR
Voor bereidingen met vaste
bereidingstijd, druk op de
toets van de bereidingsduur
en stel met de toetsen +/- de
gewenste tijd in. Nadat deze
tijd verstreken is, klinkt er
een geluidssignaal en stopt
de werking van de oven.
Zet de thermostaatknop en
de schakelaar in de stand 0,
en druk vervolgens op de
handbedieningstoets.
HALFAUTOMATISCHE
BEDIENING EINDE
BEREIDING
Voor bereidingen met vaste
bereidingstijd, druk op de
toets voor einde bereiding
en stel met de toetsen +/
- de tijd in waarop de
werking van de oven moet
stoppen. Nadat de tijd ver-
streken is, klinkt er een
geluidssignaal en stopt de
oven. Zet de thermostaatknop
en de schakelaar terug in de
stand 0 en druk vervolgens
op de handbedieningstoets.
TEMPORIZADOR
ELECTRÓNICO
DE 6 TECLAS:
Regulación del reloj
Apretar simultáneamente las
teclas de duración y fin
de cocción , y pulsar las
teclas +/- hasta la pro-
gramación de la hora deseada.
FUNCIÓNAMIENTO
MANUAL:
Para cocciones con tiempo
indefinido apretar la tecla
manual .
FUNCIONAMIENTO
SEMIAUTOMÁTICO DE
DURACIÓN COCCIÓN:
Para cocciones con tiempo
definido. Apretar la tecla de
duración cocción y progra-
mar con las teclas +/- el
tiempo necesario para la coc-
ción. Transcurrido el tiempo
entra en funcionamiento la
señal acústica y el horno deja
de funcionar. Volver a
colocar el mando del termo-
stato y del selector de
potencia en posición 0 luego
apretar la tecla manual.
FUNCIONAMIENTO
SEMIAUTOMÁTICO DE
FIN COCCIÓN:
Para cocciones con tiempo
definido apretar la tecla de
fin cocción y programar
con las teclas +/- la hora en
la cual se quiere que el
horno deje de funcionar.
Transcurrido el tiempo entra
en funcionamiento el indica-
dor acústico y el horno se
para. Volver a colocar el
mando del termostato y del
selector de potencia en
posición 0, luego apretar la
tecla manual.
ELEKTRONISCHE
ZEITSCHALTUHR
MIT 6 TASTEN
Einstellung der Uhr
Gleichzeitig die Tasten für
Gardauer und Garende
drücken und die
Tasten +/- betätigen, bis die
gewünschte Uhrzeit einge-
stellt ist.
MANUALBETRIEB
Für unbestimmte Garzeiten
die Taste Manualbetrieb
drücken.
HALBAUTOMATISCHER
BETRIEB GARDAUER
Für bestimmte Garzeiten.
Die Taste für Gardauer
drücken und mit den Tasten
+/- die erforderliche Garzeit
einstellen. Nach Ablauf der
eingestellten Garzeit ertönt
der Signalton und der Back-
ofen wird ausgeschaltet.
Den Drehgriff des Thermo-
stats und des Umschalters
wieder auf 0 stellen und
dann die Taste für den
Manualbetrieb drücken.
HALBAUTOMATISCHER
BETRIEB GARENDE
Für bestimmte Garzeiten die
Taste für Garende
drücken und mit den Tasten
+/- die Uhrzeit einstellen, in
der der Backofen ausge-
schaltet werden soll. Nach
Ablauf der eingestellten Gar-
zeit ertönt der Signalton und
der Backofen wird ausge-
schaltet. Den Drehgriff des
Thermostats und des Um-
schalters wieder auf 0 stellen
und dann die Taste für den
Manualbetrieb drücken.
IT GB FR
24
FONCTIONNEMENT
AUTOMATIQUE
Pour les cuissons à temps
défini, appuyer sur la
touche de durée cuisson
et, à l’aide des touches
+/-, régler le temps
nécessaire à la cuisson.
Appuyer sur la touche de
fin de cuisson et régler
l’heure l’on veut que le
four s’arrête.
A la fin du programme, le
symbole AUTO clignote et
le signal sonore qui retentit
alors doit être interrompu
en appuyant sur n’importe
quelle touche.
MINUTEUR
Appuyer sur la touche du
minuteur et sélectionner le
temps de cuisson désiré
avec la touche +/-. Le temps
préétabli étant écoulé, le
signal sonore qui retentit
alors peut être interrompu
en appuyant sur n’importe
quelle touche.
ERREURS DE
PROGRAMMATION
Il y a erreur de programma-
tion si l’heure indiquée par
l’horloge est comprise entre
l’heure de début et l’heure de
fin de cuisson. L’erreur est
indiquée par un signal sonore
et par le clignotement du
symbole AUTO. L’erreur de
programmation peut être
corrigée en modifiant la
durée ou le temps de cuisson.
ANNULATION DU
PROGRAMME
Un programme peut être an-
nulé en appuyant sur le
bouton de fonctionnement
manuel.
FULLY AUTOMATIC
OPERATION
To set the end of cooking
time, press the duration key
and press the +/- keys
to set the duration of
cooking. Press the end of
cooking key and press
the +/- keys to set the time
at which you want the oven
to switch off.
When you finish setting
these times, the AUTO
symbol flashes and the
buzzer sounds. Press any
key to silence it.
ALARM TIMER
Press the alarm timer key
and press the +/- keys to set
the required duration of
cooking. The buzzer sounds
when the cooking time
ends. Press any key to
silence it.
PROGRAMMING
ERRORS
You cannot program in a
cooking period which starts
earlier than the time
displayed on the clock. If
you try to do so, the buzzer
sounds and the AUTO
symbol flasher. Simply
change the duration or
cooking time to correct the
error.
CANCELLING A COOKING
PROGRAMME
To cancel a cooking
programme, simply press
the manual key.
FUNZIONAMENTO
AUTOMATICO
Per cotture a tempo definito
premere il tasto di durata
cottura e impostare
con i tasti +/- il tempo
necessario per la cottura.
Premere il tasto di fine
cottura e impostare
l’ora in cui si vuole che il
forno si arresti.
Al termine del programma
il simbolo AUTO lampeg-
gia, si mette in funzione il
segnale acustico che dovrà
essere spento premendo un
tasto qualsiasi.
CONTAMINUTI
Premere il tasto contaminati
e selezionare il tempo di
cottura desiderato con il
tasto +/-. Al termine del
tempo impostato si mette in
funzione il segnale acustico
che può essere interrotto
premendo uno qualsiasi dei
tasti.
ERRORI DI
PROGRAMMAZIONE
Si ha un errore di program-
mazione se l’ora indicata
dall’orologio è compresa tra
l’ora di inizio e l’ora di fine
cottura. L’errore sarà segna-
lato acusticamente e me-
diante il lampeggio inter-
mittente del simbolo
AUTO. L’errore di impo-
stazione può essere corretto
variando la durata o il tem-
po di cottura.
ANNULLAMENTO
PROGRAMMA
Un programma può essere
annullato premendo il
pulsante del funzionamento
manuale.
ES NL PTDE
25
FUNCIONAMENTO
AUTOMÁTICO
Para cozinhar a tempo
definido carregar na tecla de
duração de cozinhado
e programar com as teclas
+/- o tempo necessário para
cozinhar. Carregar na tecla
fim de cozinhado e
programar a hora na qual se
deseja que o forno deixe de
funcionar.
Ao fim do programa o
símbolo AUTO lampeja,
coloca-se em função o sinal
acústico que deverá ser
desligado carregando uma
tecla qualquer.
CONTADOR DE MINUTOS
Carregar na tecla conta-mi-
nutos e seleccionar o tempo
de cozinhado adequado
com a tecla +/-. Ao fim do
tempo programado, coloca-
se em função o sinal
acústico que pode ser
interrompido carregando
uma das teclas quaisquer.
ERROS DE
PROGRAMAÇÃO
Tem-se um erro de progra-
mação se a hora indicada
pelo relógio estiver compre-
endida entre a hora de
início e a hora do fim de
cozinhado. O erro será sina-
lizado acusticamente e me-
diante o lampejo intermi-
tente do símbolo AUTO. O
erro de programação pode
ser corrigido variando a
duração ou o tempo de
cozinhado.
ANULAMENTO
PROGRAMA
Um programa pode ser
anulado carregando no
botão do funcionamento
manual.
AUTOMATISCHE
WERKING
Voor bereidingen met een
vaste bereidingstijd, druk
op de toets van de be-
reidingsduur en stel
met de toetsen +/- de tijd in
die nodig is voor de
bereiding. Druk op de toets
van einde bereiding en
stel het tijdstip in waarop u
wilt dat de oven stopt.
Aan het einde van het
programma knippert het
symbool AUTO en klinkt
het geluidssignaal; dit kan
door indrukken van een
willekeurige toets worden
afgezet.
MINUTENTELLER
Druk op de toets van de mi-
nutenteller en stel de ge-
wenste bereidingstijd in met
de toets +/-. Aan het einde
van de ingestelde tijd wordt
het geluidssignaal inge-
schakeld, dat kan worden
afgezet door op een wille-
keurige toets te drukken.
PROGRAMMEER-
FOUTEN
Er is sprake van een pro-
grammeerfout als de tijd die
door de klok wordt aan-
gegeven tussen het begin- en
het eindtijdstip van de be-
reiding ligt. Deze fout wordt
gesignaleerd door een ge-
luidssignaal en door het
knipperen van het symbool
AUTO. Verkeerde instellin-
gen kunnen worden ge-
corrigeerd door de duur of de
bereidingstijd te veranderen.
ANNULEREN
PROGRAMMA
Het is mogelijk een
programma te annuleren
door op de knop van de
handbediening te drukken.
FUNCIONAMIENTO
AUTOMÁTICO:
Para cocciones con tiempo
definido apretar la tecla de
duración de cocción y
programar con las teclas +/-
el tiempo necesario para la
cocción. Apretar la tecla de
fin cocción y pro-
gramar la hora en la cual se
quiere que el horno se pare.
Al final del programa el
símbolo AUTO parpadea,
se pone en funcionamiento
la señal acústica que deberá
ser apagada apretando cual-
quier tecla .
MINUTERO:
Apretar la tecla del minute-
ro y seleccionar el tiempo
de cocción deseado con la
tecla +/-. Al final del
tiempo programado se
pone en funcionamiento la
señal acústica que puede
ser interrumpida apretando
cualquier tecla.
ERRORES DE
PROGRAMACIÓN
Tenemos un error de pro-
gramación si la hora indi-
cada por el reloj está com-
prendida entre la hora de
inicio y la hora de fin
cocción. El error será seña-
lado acústicamente y me-
diante el parpadeo inter-
mitente del símbolo AUTO.
El error de programación
puede ser corregido va-
riando la duración o el
tiempo de cocción.
ANULACIÓN DE UN
PROGRAMA:
Un programa puede ser
anulado apretando el botón
del funcionamiento manual.
AUTOMATIKBETRIEB
Für bestimmte Garzeiten.
Die Taste für Gardauer
drücken und mit den
Tasten +/- die erforderliche
Garzeit einstellen. Die
Taste für Garende drücken
und die Uhrzeit ein-
stellen, in der der Backofen
ausgeschaltet werden soll.
Bei Programmende blinkt
das Symbol AUTO und es
ertönt der Signalton, der
durch Drücken einer be-
liebigen Taste abgestellt
wird.
KURZZEITMESSER
Die Taste des Kurzzeit-
messers drücken und mit
der Taste +/- die ge-
wünschte Garzeit einstellen.
Nach Ablauf der einge-
stellten Garzeit ertönt der
Signalton, der durch
Drücken einer beliebigen
Taste abgestellt werden
kann.
PROGRAMMIERUNGS-
FEHLER
Ein Programmierungsfehler
liegt vor, wenn die von der
Uhr angezeigte Uhrzeit
zwischen Garbeginn und
Garende liegt. Der Fehler
wird durch einen Warnton
und durch Blinken des
Symbols AUTO signali-
siert. Der Program-
mierungsfehler kann durch
Änderung der Gardauer
oder der Garzeit korrigiert
werden.
LÖSCHEN EINES
PROGRAMMS
Ein Programm kann durch
Drücken der Manualbetrieb-
Taste gelöscht werden.
IT GB FR
26
SOSTITUZIONE
DELLA LAMPADA
DEL FORNO
IMPORTANTE:
La lampada del forno de-
ve avere precise caratteri-
stiche:
a) struttura adatta alle alte
temperature (fino a 300
gradi)
b) alimentazione: vedere
valore V/Hz indicato sul-
la targa matricola
c) potenza 25 W.
d) attacco di tipo E 14
Prima di procedere, stac-
care l’apparecchio dalla
linea di alimentazione.
- per evitare danni, stende-
re nel forno uno strofinac-
cio per stoviglie
-svitare la protezione in
vetro della lampada
- svitare la vecchia lampa-
da e sostituirla con la nuo-
va
- rimontare la protezione in
vetro e togliere lo strofi-
naccio per stoviglie
-collegare nuovamente
l’apparecchio alla linea di
alimentazione.
REPLACING THE
OVEN LIGHT
IMPORTANT:
The oven light must have
these precise features:
a) it must be able to resist
high temperatures (up
to 300°C)
b) power supply: see V/Hz
indicated on data plate.
c) power 25W.
d) E 14 connection.
Before proceeding, dis-
connect the appliance
from the main electricity
supply.
- to prevent damage, place
a tea cloth in the oven
-unscrew the glass cover of
the light
- unscrew the old light bulb
and replace it with the new
one
-put back the glass cover
and remove the tea cloth
- connect the appliance to
the main electricity
supply.
REMPLACEMENT
DE LA LAMPE DU
FOUR
IMPORTANT:
La lampe du four doit ré-
pondre à des caracté-
ristiques bien précises :
a) structure adaptée à de
hautes températures
(jusqu’à 300 degrés)
b) alimentation: voir va-
leur V/Hz indiquée sur
la plaquette d’identifi-
cation.
c) puissance 25 W.
d) raccord de type E14
Avant de procéder à
l’opération de rempla-
cement, débrancher l’ap-
pareil du réseau d’alimen-
tation,
- pour éviter tout endom-
magement, placer dans le
four un essuie de
vaisselle,
- dévisser la protection en
verre de la lampe,
- dévisser la lampe uséeet
la remplacer par une nou-
velle,
- remonter la protection en
verre et enlever l’essuie
de vaisselle,
- brancher à nouveau l’ap-
pareil au réseau d’ali-
mentation.
ES NL PTDE
27
AUSWECHSLUNG
DER OFEN-
BELEUCHTUNG
WICHTIG:
Die Ofenbeleuchtung
muss folgende Merkmale
aufweisen:
a)hochtemperatur-
beständig (bis zu 300
Grad)
b) Stromversorgung: siehe
Anschlusswerte V/Hz
auf dem Typenschild.
c) Leistung 25 W
d) Sockel E 14
Das Gerät zuallererst vom
Stromnetz abtrennen.
-Zur Vermeidung von
Schadensfällen, ist im
Ofen ein Geschirrtuch
auszubreiten
- Lampenabdeckung aus
Glas abschrauben
- Alte Lampe abschrauben
und mit einer neuen Be-
leuchtung auswechseln
-Lampenabdeckung
wieder anmontieren und
Geschirrtuch entfernen
- Das Gerät erneut an das
Stromnetz anschließen.
CAMBIO DE LA
BOMBILLA DEL
HORNO
IMPORTANTE:
La bombilla del horno
debe tener unas caracte-
rísticas bien determi-
nadas:
a) estructura apta para
las altas temperaturas
(hasta 300 grados)
b) alimentación: véase el
valor V/Hz indicado en
la chapa de matrícula.
c) potencia 25 W.
d) casquillo de tipo E14
Antes de proceder con el
cambio, se debe desen-
chufar el aparato de la
red eléctrica de alimen-
tación.
- para evitar daños, poner
en el horno un trapo para
vajillas
- desenroscar la protección
en vidrio de la bombilla
- desenroscar la vieja
bombilla y cambiarla por
la nueva
- montar de nuevo la pro-
tección en vidrio y quitar
el trapo para vajillas
- enchufar de nuevo el
aparato a la línea de
alimentación.
HET VERVANGEN
VAN HET LAMPJE
VAN DE OVEN
BELANGRIJK:
Het lampje van de oven
dient de volgende ken-
merken te bezitten:
a) een structuur die ge-
schikt is voor hoge tem-
peraturen (tot 300°C).
b) voeding: zie de waarde
V/Hz die wordt ver-
meld op de typeplaat
c) vermogen 25 W.
d) aanhechting van het
type E 14
Alvorens hiertoe over te
gaan, dient het apparaat
van de stroom losge-
koppeld te worden.
- om schade te voorkomen,
dient men een theedoek in
de oven te leggen.
-draai de glazen be-
scherming van de lamp los
- draai het oude lampje los
en vervang het met een
nieuw
-breng de glazen be-
scherming weer aan en
verwijder de theedoek
-sluit het apparaat weer op
de stroom aan.
SUBSTITUIÇÃO
DA LÂMPADA DO
FORNO
IMPORTANTE:
A lâmpada do forno deve
haver características exac-
tas:
a) estrutura adequada às
altas temperaturas (até
300 graus)
b) alimentação: vide valor
V/Hz indicado na placa
de matrícula.
c) potência 25 W.
d) casquilho tipo E 14
Antes de proceder, desli-
gar o aparelho da linha de
alimentação.
-para evitar danos, estender
no forno um pano da louça
- desapertar a protecção em
vidro da lâmpada
-desapertar a lâmpada
velha e substituí-la com a
nova
-tornar a montar a pro-
tecção em vidro e tirar o
pano da louça
-ligar novamente o apa-
relho à linha de alimen-
tação.
IT GB FR
28
DEMONTAGE DE
LA PORTE DU
FOUR
Le démontage de la porte
du four peut être effectué
facilement de la manière
suivante :
- ouvrir complètement la
porte;
- lever les deux manettes
indiquées sur la fig.;
- refermer la porte sur le
premier cran d’arrêt
déterminé par les deux
manettes soulevées au
préalable;
- lever la porte vers le haut
et vers l’extérieur du four
pour l’ôter de son siège;
Pour remonter la porte,
insérer les charnières dans
les logements prévus à cet
effet, puis remettre les deux
manettes en position de
fermeture.
REMOVING THE
OVEN DOOR
The oven door can be
removed quickly and easily.
To do so, proceed as
follows:
- Open the door fully.
-Lift the two levers shown
in fig.
- Close the door as far as
the first stop (caused by
the raised levers).
- Lift the door upwards
and outwards to remove
it from its mountings.
To replace fit the door, fit
the hinges in their
mountings and lower the
two levers.
SMONTAGGIO
DELLA PORTA
FORNO
Lo smontaggio della porta
forno può essere facilmente
effettuato operando come
segue:
- aprire totalmente la porta;
- sollevare le due levette
indicate in fig.;
- richiudere la porta sul
primo scatto di arresto
determinato dalle due
levette sollevate in
precedenza;
- sollevare la porta verso
l’alto e verso l’esterno
del forno per estrarla
dalle sedi;
Per rimontare la porta, inse-
rire le cerniere nelle apposi-
te sedi e quindi riportare le
due levette nella posizione
di chiusura.
ES NL PTDE
29
DESMONTAGEM
DA PORTA FORNO
A desmontagem da porta
forno pode ser facilmente
efectuada operando como a
seguir se indica:
- abrir totalmente a porta;
- elevar as duas alavancas
indicadas na fig.;
-fechar a porta no
primeiro disparo de
batida determinado pelas
duas alavancas
levantadas anteriormente;
- elevar a porta para cima
e para a parte de fora do
forno para a extrair das
sedes;
Para tornar a montar a
porta, inserir as dobradiças
nas sedes apropriadas e em
seguida tornar a levar as
duas alavancas na posição
de fecho.
DEMONTAGE
VAN DE
OVENDEUR
De ovendeur kan gemakke-
lijk worden gedemonteerd,
als volgt:
- open de deur helemaal;
- til de twee hendeltjes die
worden aangeduid op
afb. op;
- sluit de deur op de eerste
stand die wordt
veroorzaakt door de twee
hendeltjes die zojuist zijn
opgetild;
- til de deur naar boven en
naar buiten op, om hem
van zijn plaats te halen;
Om de deur weer te plaat-
sen moeten de scharnieren
in hun behuizingen worden
geplaatst en moeten de twee
hendeltjes weer worden
teruggezet in de sluitende
positie.
DESMONTAJE DE
LA PUERTA DEL
HORNO
El desmontaje de la puerta
del horno puuede ser fácil-
mente efectuado obrando
como sigue:
- abrir totalmente la
puerta;
- alzar las dos palanquitas
indicas en fig.;
- volver a cerrar la puerta
después de la primera pa-
rada, consecuencia de la
subida previa de las dos
palanquitas;
- alzar la puerta hacia
arriba y hacia el exterior
del horno para extraerla;
Para volver a montar la
puerta, introducir las bi-
sagras en las apropiadas
sedes y luego volver a co-
locar las dos palanquitas en
la posición de cierre.
AUSBAUEN DER
OFENTÜR
Die Backofentür kann
mühelos ausgebaut werden.
Dazu folgendermaßen vor-
gehen:
-die Tür ganz öffnen;
- die zwei auf Abb. dar-
gestellten Hebel an-
heben;
- die Tür wieder bis zur
ersten, von den zwei
zuvor angehobenen
Hebeln bestimmten
Einrastung schließen;
- die Tür nach oben und
nach außen anheben und
herausnehmen;
Um die Tür wieder ein-
zubauen, die Scharniere
wieder einsetzen und dann
die zwei Hebel in Schließ-
stellung bringen.
IT GB FR
30
POUR
L’INSTALLATEUR
Encastrement du four
Le four peut être installé
sous un plan de cuisson ou
dans une colonne. Les
dimensions de l’encastre-
ment doivent correspondre
à celles qui sont indiquées
sur la figure.
Le matériau avec lequel le
meuble est réalisé doit être
en mesure de résister à la
chaleur. Le four doit être
centré par rapport aux pa-
rois du meuble et fixé avec
les vis et les douilles four-
nies à cet effet.
INSTALLATION
INSTRUCTIONS
Flush fitting
The oven can be installed
under a work top or in a
cooking column. Figure
shows the installation di-
mensions.
Make sure that surrounding
materials are heat resistant.
Align the oven centrally
with respect to the side
walls of the units surround-
ing it and fix it in place
with the screws and Allen
screws provided.
PER
L’INSTALLATORE
Incasso del forno
Il forno può essere installa-
to sotto un piano di cottura
oppure in colonna. Le di-
mensioni dell’incasso devo-
no essere come riportato in
figura.
Il materiale del mobile deve
essere in grado di resistere
al calore. Il forno deve esse-
re centrato rispetto alle pa-
reti del mobile e fissato con
le viti e bussole che sono
fornite in dotazione.
BRANCHEMENT
ELECTRIQUE
Avant d’effectuer le bran-
chement électrique, s’assu-
rer que :
- les caractéristiques de l’in-
stallation permettent de re-
specter ce qui est indiqué
sur la plaque d’identifica-
tion qui est appliquée sur le
devant du four;
- l’installation est munie
d’un raccordement à la pri-
se de terre conforme aux
normes et aux dispositions
prévues par la loi. La mise à
la terre est obligatoire aux
termes de la loi.
Le câble ne doit en aucun
cas atteindre une
température supérieure de
plus de 50° C par rapport à
la température ambiante.
Si un appareil fixe n’a pas
de cordon d’alimentation et
de fiche ou d’autre dispositif
assurant la déconnexion du
secteur, avec une distance
d’ouverture des contacts
permettant une déconnexion
ELECTRICAL
CONNECTIONS
Before connecting the oven
to the mains power supply,
make sure that:
- The supply voltage corre-
sponds to the specifications
on the data plate on the
front of the oven.
- The mains supply has an
efficient earth (ground)
connection complying with
all applicable laws and re-
gulations. Correct earthing
(grounding) is a legal requi-
rement.
The power cable should
never reach a temperature
50° C above ambient tem-
perature at any point along
its length.
If a fixed appliance is not
provided with a power cable
and plug, or some other
device permitting it to be
disconnected from the
mains electricity supply,
with a gap between the
contacts big enough to
guarantee class III
ALLACCIAMENTO
ELETTRICO
Prima di effettuare l’allac-
ciamento elettrico accertarsi
che:
- le caratteristiche dell’im-
pianto siano tali da soddi-
sfare quanto indicato sulla
targa matricola applicata sul
fronte del forno;
- l’impianto sia munito di
un efficace collegamento di
terra secondo le norme e le
disposizioni di legge in vi-
gore. La messa a terra è ob-
bligatoria a termini di leg-
ge.
Il cavo in nessun punto
dovrà raggiungere una
temperatura superiore di
50° C quella ambiente.
Se un apparecchio fisso non
è provvisto di cavo di ali-
mentazione e di spina, o di
altro dispositivo che assicu-
ri la disconnessione dalla
rete, con una distanza di
apertura dei contatti che con-
senta la disconnessione
completa nelle condizioni
ES NL PTDE
31
PARA O
INSTALADOR
Encastre do forno
O forno pode ser instalado
debaixo de um plano de
cozedura ou então na
coluna. As dimensões de
encastre devem ser como
referido na figura.
O material do móvel deve
ser capaz de resistir ao
calor. O forno deve ser
centrado respeito ás paredes
do móvel e fixado com os
parafusos e buchas que são
fornecidas em dotação.
VOOR DE
INSTALLATEUR
Inbouw van de oven
De oven kan worden ge-
ïnstalleerd onder een kook-
plaat of in een hoge kast.
De inbouwafmetingen
moeten overeenstemmen
met de maten van af-
beelding.
Het materiaal van het
meubel moet hittebestendig
zijn. De oven moet tussen
de wanden van het meubel
worden gecentreerd, en
worden vastgezet met de
inbusschroeven die bij de
oven geleverd zijn.
PARA EL
INSTALADOR:
Encastre del horno
El horno puede ser insta-
lado debajo de la encimera
o en una columna. Las
dimensiones del encastre
deben ser como se muestra
en figura.
El material del mueble debe
ser capaz de resistir al calor.
El horno debe ser centrado
respecto de las paredes del
mueble y fijado con los tor-
nillos y casquillos sumini-
strados junto con el pro-
ducto.
FÜR DEN
INSTALLATEUR
Einbau des Backofens
Der Ofen kann unter einem
Kochfeld oder in einen
Schrank eingebaut werden.
Die Einbaumaße müssen
den auf der Abbildung dar-
gestellten entsprechen. Das
Möbelmaterial muss hitze-
beständig sein. Der Back-
ofen muss zu den Möbel-
wänden zentriert, und mit
den mitgelieferten Schrau-
ben und Buchsen befestigt
werden.
LIGAÇÃO
ELÉCTRICA
Antes de efectuar a ligação
eléctrica certificar-se que:
- as características da insta-
lação sejam tais que possam
satisfazer quanto indicado
na placa da matrícula apli-
cada na fronte do forno;
- a instalação esteja dotada
de uma eficaz ligação a ter-
ra segundo as normas e as
disposições de lei em vigor.
A ligação a terra é obriga-
tória nos termos da lei.
O cabo em nenhum ponto
deverá atingir uma tempera-
tura superior de 50° C a-
quela ambiente.
Se um aparelho fixo não
estiver equipado com cabo
de alimentação e ficha, ou
outro dispositivo que
garanta a desactivação da
rede, com uma distância de
abertura dos contactos que
permita a desactivação com-
pleta nas condições da cate-
goria de sobretensão III,
esses dispositivos de
ELEKTRISCHE
AANSLUITING
Controleer, voordat u de
elektrische aansluiting tot
stand brengt, of:
- de eigenschappen van de
elektrische installatie over-
eenstemmen met de ge-
gevens op het typeplaatje
op de voorzijde van de
oven;
- de installatie goed geaard
is volgens de geldende
voorschriften en wettelijke
bepalingen. De aarding is
volgens de wet verplicht.
De kabel mag in geen geval
meer dan 50° warmer
worden dan de
omgevingstemperatuur.
Als een vast apparaat niet
beschikt over een
voedingskabel en stekker of
over een ander systeem dat
de afkoppeling van het
elektriciteitsnet garandeert
(met een afstand tussen de
contacten die in
overspanningscategorie III
een complete afkoppeling
CONEXIÓN
ELÉCTRICA
Antes de efectuar la cone-
xión eléctrica cerciorarse de
que:
- las características de la in-
stalación se correspondan
con las indicadas en la
placa situada en la parte
frontal del horno;
- la instalación esté provista
de una eficaz conexión a
tierra según las normas y
las disposiciones de la ley
en vigor. La conexión a
tierra es obligatoria según la
ley.
El cable en ningún punto
deberá alcanzar una tempe-
ratura superior de 50° C a
temperatura ambiente.
Si un aparato fijo no está
provisto de cable de
alimentación con enchufe,
en la red de alimentación
debe incluirse un dispositi-
vo de corte, instalado con
arreglo a las disposiciones
vigentes y con una distancia
de apertura de los contactos
STROM-
ANSCHLUSS
Vor der Durchführung des
Stromanschluss muss si-
chergestellt werden, dass:
- die Eigenschaften der
Stromnetzes mit den
Werten auf dem vorne am
Ofen angebrachten Typen-
schild übereinstimmen;
- das Stromnetz gemäß den
geltenden Bestimmungen
und Rechtsvorschriften ge-
erdet ist. Die Erdung ist ge-
setzlich vorgeschrieben.
Das Kabel darf an keiner
Stelle eine Temperatur von
über 50° C erreichen.
Wenn ein Standgerät nicht
mit Netzkabel und -stecker
oder einer sonstigen
Vo r r ic h t un g a u s g es t a tt e t i s t ,
das die Trennung vom Netz
gewährleistet, und dessen
Öffnungsweg der Kontakte
die vollständige Trennung
unter den Bedingungen der
Überspannungskategorie III
gestattet, so müssen diese
Trenneinrichtungen gemäß
IT GB FR
32
N.B. Le fabricant décline
toute responsabilité si les
indications présentées dans
ce document et les normes
adoptées habituellement en
matière de prévention des
accidents du travail ne sont
pas respectées.
N.B. The manufacturer de-
clines all responsibility for
damage or injury if the
above instructions and nor-
mal safety precautions are
not respected.
N.B. Il costruttore declina
ogni responsabilità nel caso
che quanto sopra e le usuali
norme antinfortunistiche
non vengano rispettate.
della categoria di
sovratensione III, tali
dispositivi di disconnessione
devono essere previsti nella
rete di alimentazione confor-
memente alle regole di in-
stallazione.
La presa o l’interruttore
onnipolare devono essere
facilmente raggiungibili con
l’apparecchiatura installata.
overvoltage protection, then
such a device must be fitted
to the power supply in
compliance with the
regulations governing
electrical installations.
The socket or switch must
be easily reachable with the
oven fully installed.
complète dans les conditions
de la catégorie de surtension
III, ces dispositifs de
déconnexion doivent être
prévus dans le réseau
d’alimentation
conformément aux normes
d’installation.
La prise ou l’interrupteur
omnipolaire doit pouvoir
être atteint facilement
lorsque l’appareil est
installé.
SASO
H05RR-F 3x1,5 mm²H05RR-F 3x2,5 mm²
H05VV-F 3x1,5 mm²H05VV-F 3x2,5 mm²
H05RN-F 3x1,5 mm²H05RN-F 3x2,5 mm²
H05V2V2-F 3x1,5 mm²H05V2V2-F 3x2,5 mm²
TYPES ET DIAMÈTRE MINIMAUX DES CÂBLES
TIPI E DIAMETRO MINIMO DEI CAVI
CABLE TYPES AND MINIMAL DIAMETERS
ES NL PTDE
33
N.B. O fabricante declina
todas as responsabilidades
no caso que quanto acima e
as usuais normas de preven-
ção contra os acidentes não
sejam respeitadas.
N.B. De fabrikant aanvaardt
geen enkele aansprake-
lijkheid in het geval het bo-
venstaande en de gebruike-
lijke regels voor onge-
vallenpreventie niet in acht
genomen worden.
Nota: El fabricante declina
toda responsabilidad en el
caso de que todo lo men-
cionado arriba y las usuales
normas para la prevención
de accidentes no sean re-
spetadas.
N.B. Der Hersteller ist nicht
haftbar, wenn die obigen
Anweisungen und die
üblichen Unfallverhütungs-
vorschriften nicht befolgt
werden.
den Installationsvorschriften
im Versorgungsnetz
vorgesehen sein.
Die Steckdose bzw. der
allpolige Schalter müssen
bei installiertem Gerät
problemlos zugänglich sein.
que asegure la desconexión
completa en las condiciones
estipuladas para la categoría
de sobretensión III.
La toma o el interruptor
omnipolar deben ser de
fácil acceso una vez insta-
lado el aparato.
mogelijk maakt), dan
moeten deze
stroomverbrekers in het
elektriciteitsnet worden
opgenomen in
overeenstemming met de
installatievoorschriften.
Het stopcontact of de
meerpolige schakelaar
moeten gemakkelijk te
bereiken zijn, ook wanneer
de apparatuur geïnstalleerd
is.
desactivação devem estar
previstos na rede de
alimentação, em
conformidade com as
instruções de instalação.
A tomada ou o interruptor
omnipolar devem-se poder
atingir facilmente com a
aparelhagem instalada.
SASO
H05RR-F 3x1,5 mm²H05RR-F 3x2,5 mm²
H05VV-F 3x1,5 mm²H05VV-F 3x2,5 mm²
H05RN-F 3x1,5 mm²H05RN-F 3x2,5 mm²
H05V2V2-F 3x1,5 mm²H05V2V2-F 3x2,5 mm²
TIPOS Y DIÁMETRO MÍNIMO DE LOS CABLES
TIPOS E DIÁMETRO MÍNIMO DOS CABOS
KABELTYPES EN MINIMALE DOORSNEDEN
KABELTYPEN UND MINIMALE DURCHMESSER
IT GB FR
34
ASSORBIMENTI ELEMENTI RISCALDANTI - HEATING ELEMENT POWER RATING
CONSOMMATION ÉLÉMENTS CHAUFFANTS
STROMAUFNAHME HEIZELEMENTE - ABSORCIÓN ELEMENTOS DE CALDEO
STROOMOPNAME VERWARMINGSELEMENTEN - CONSUMO DOS ELEMENTOS DE AQUECIMENTO
Elemento esterno resistenza cielo
Roof element, external
Élément extérieur résistance ciel
Oberes äußeres Heizelement
Elemento exterior resistencia techo
Extern element weerstand bovenkant
Elemento externo da resistência superior
Elemento interno resistenza cielo
Roof element, internal
Élément intérieur résistance ciel
Oberes inneres Heizelement
Elemento interior resistencia techo
Intern element weerstand bovenkant
Elemento interno da resistência superior
Elemento circolare
Circular element
Élément circulaire
Rundes Heizelement
Elemento circular
Rond element
Elemento circular
Elemento suola
Bottom element
Élément sole
Unteres Heizelement
Elemento suelo
Element bodem
Elemento inferior
CARATTERISTICHE TECNICHE - TECHNICAL FEATURES
CARACTÉRISTIQUES TECHNIQUES
TECHNISCHE DATEN - CARACTERÍSTICAS TÉCNICAS
TECHNISCHE KENMERKEN - CARACTERÍSTICAS TÉCNICAS
DIMENSIONI MUFFOLA
MUFFLE SIZE
DIMENSIONS MOUFLE
ABMESSUNGEN MUFFEL
DIMENSIONES CÁMARA
AFMETINGEN MOFFEL
DIMENSÕES DA MUFLA
Larghezza (mm) 607
Altezza (mm) 335
Profondità (mm) 390
Length (mm) 607
Height (mm) 335
Depth (mm) 390
Longueur (mm) 607
Hauteur (mm) 335
Profondeur (mm) 390
Länge (mm) 607
Höhe (mm) 335
Tiefe (mm) 390
Longitud (mm) 607
Altura (mm) 335
Profundidad (mm) 390
Lengte (mm) 607
Hoogte (mm) 335
Diepte (mm) 390
Comprimento (mm) 607
Altura (mm) 335
Profundidade (mm) 390
VOLUME UTILE
(statico/ventilato) 75 litri
CAVITY VOLUME
(conventional/fan assisted) 75 litres
VOLUME UTILE
(statique/ventilé) 75 litres
NUTZINHALT
(Ober-Unterhitze/Umluft) 75 Liter
VOLUMEN ÚTIL
(estático/aire) 75 litros
NUTTIG VOLUME
(statisch/geventileerd) 75 liter
VOLUME ÚTIL
(estático/ventilado) 75 litros
1100 W
1750 W
2300 W
1300 W
35
La Casa costruttrice declina ogni responsabilità per le possibili inesattezze contenute nel presente
opuscolo, imputabili ad errori di stampa o di trascrizione. Si riserva il diritto di apportare ai propri
prodotti quelle modifiche che ritiene necessarie o utili, senza pregiudicare le caratteristiche essenziali.
The manufacturer declines all responsibility for possible inaccuracies contained in this pamphlet, due
to printing or copying errors. We reserve the right to make on our own products those changes to be
considered necessary or useful, without jeopardizing the essential characteristics.
Dans un souci constant d’amélioration qualitative, le constructeur se réserve la possibilité d’apporter à
ses produits les modifications utiles, sans compromettre ses caractéristiques essentielles.
Le constructeur décline toutes responsabilité pour d’eventuelles inexactitudes contenues dans cette
notice, imputables à des erreurs d’impression ou de transcription.
De Fabrikant wijst iedere verantwoordelijkheid af voor enige onjuistheden in deze brochure welke
geweten kunnen worden aan copie - of drukfouten. Hij behoudt zich het recht voor aan zijn eigen
produkten wijzigingen aan te brengen die hij noodzakelijk of nuttig acht zonder dat de wezenlijke
kenmerken erdoor varanderd worden.
El fabricante declina toda responsabilidad por las posibles inexactitudes contenidas en el presente
documento, imputables a errores de impresión o relacionadas. El fabricante se reserva el derecho de
aportar a sus propios productos aquellas modificaciones que se considere necesarias o útiles, sin
perjudicar las características esenciales.
O Fabricante não assume nenhuma responsabilidade acerca de eventuais inexactidões contidas na
presente publicação, devidas a erros de impressão ou de transcrição. Reserva-se o direito de efectuar
nos próprios produtos as eventuais modificações que considerar necessárias ou úteis, sem prejudicar
as características essenciais.
Die Herstellerfirma übernimmt keinerlei Verantwortung für eventuell in dieser Broschüre enthaltene
Ungenauigkeiten, die auf Druckfehler zurückzuführen sind und behält sich das Recht vor an ihren
Produkten alle für notwendig erachteten Änderungen anzubringen, ohne die wesentlichen
Eigenschaften zu beeinflussen.
COD. 2.002.08.0 - 3°ed
ItalianoEnglishFrançaisDeutschEspañolNederlandsPortuguês ItalianoEnglishDeutschEspañolPortuguêsNederlandsFrançais
IT
TIMER TOUCH CONTROL
GB
TIMER TOUCH CONTROL
DE
TOUCH CONTROL TIMER
ES
TIMER TOUCH CONTROL
PT
TIMER TOUCH CONTROL
NL
TIMER TOUCH CONTROL
FR
MINUTEUR À TOUCHES SENSITIVES
TIMER TOUCH CONTROL
Regolazione dell’orologio
Figura 1
Alla prima accensione appariranno i simboli “Autoe “0:00” lampeggianti. Per la prima regolazione
dell’orologio, premere il tasto centrale per 3 secondi circa. Quando appare il simbolo
premere il pulsante “+” o “-“ per regolare l’ora desiderata.
Attendere, e un segnale acustico segnalerà che l’ora e’ stata impostata (figura 1).
La modifica dell’ora impostata può essere eseguita successivamente tenendo premuti
contemporaneamente i tasti “+” e “-“ per 3 secondi e procedendo quindi alla regolazione dell’ora
come precedentemente spiegato.
Contaminuti
Figura 2
E’ una funzione di contaminati, che non interagisce con il funzionamento del forno, perciò al termine
del conteggio il forno continuerà a funzionare.
Per la regolazione premere il tasto centrale per 3 secondi, fino a che appare il simbolo
(figura 2). Con i pulsanti “+” e “-“ impostare il tempo desiderato.
Per una successiva regolazione del contaminati, premere nuovamente il tasto centrale per 3
secondi e procedere alla nuova regolazione.
Un segnale acustico segnalerà il termine del conteggio. Per disattivarlo, premere un qualsiasi tasto.
Durata della cottura
Figura 3
E’ la funzione di cottura semi-automatica. Permette di definire i tempi di durata della cottura.
Premere il tasto centrale per 3 secondi, Premere nuovamente il tasto centrale ed apparirà la scritta
“dur” (figura 3). Con i pulsanti “+” e “-“ impostare il tempo di cottura desiderato.
Italiano
Fine della cottura
Figura 4
Può essere impostata l’ora nella quale terminerà la cottura
Premere il tasto centrale per 3 secondi. Premere nuovamente il tasto centrale due volte consecutive
ed apparirà la scritta “End” (figura 4). Con i pulsanti “+” e “-“ impostare il l’ora della fine cottura
desiderata.
Il forno funzionerà con la temperatura e la funzione pre-impostate, fino all’ora stabilita.
Programmazione della cottura automatica
Figura 5
Funzione di cottura con programmazione a tempo definito.
Premere il tasto centrale per 3 secondi, Premere nuovamente il tasto centrale ed apparirà la scritta
“dur”. Con i pulsanti “+” e “-“ impostare il tempo di cottura desiderato. Attendere alcuni secondi che
la regolazione venga memorizzata.
Premere nuovamente il tasto centrale per 3 secondi. Premere nuovamente il tasto centrale due
volte consecutive ed apparirà la scritta “End” (figura 4). Con i pulsanti “+” e “-“ impostare il l’ora della
fine cottura desiderata.
Esempio :
Ora attuale : 12.30
Impostazione durata cottura : 10 minuti
Impostazione fine della cottura : 14.00
Il forno inizierà la cottura alle 13.50 (14.00 meno 00.10) con la funzione e la temperatura pre-
impostate e si fermerà alle 14.00
Al termine della cottura verrà emesso un segnale acustico, che potrà essere interrotto premendo un
tasto qualsiasi.
Regolazione dell’intensità della suoneria
Per regolare l’intensità sonora del segnale acustico, premere contemporaneamente i tasti “+” e “-“.
Quindi premere il tasto centrale, ed apparirà la scritta “ton1” (tonalità alta) lampeggiante. Premere
quindi ripetutamente il tasto “-“ per selezionare “ton2” (tonalità media) o “ton3” (tonalità bassa).
Premere il tasto centrale per impostare la tonalità selezionata.
TIMER TOUCH CONTROL
Setting the clock
Figure 1
“Auto” and “0:00” will start flashing when the unit is switched on for the first time. To set the clock,
press the central button for about 3 seconds. When appears, press “+” or “-“ to set the correct
time.
Wait until a beep tells you that the clock has been set (figure 1).
To set the time at a later stage, press “+” and “-” together for 3 seconds and then adjust the clock as
described above.
Minute counter
Figure 2
As this minute counter does not control the oven, when it finishes counting the oven will continue to
work.
To set, press the central button for 3 seconds until appears (figure 2). Press “+” and “-” to
set the required time.
To set the minute counter at a later stage, press the central button for 3 seconds and adjust as
described above.
The minute counter beeps when it finishes counting. To disable it, press any button.
Cooking time
Figure 3
This is a semi-automatic cooking function. It can be used to set cooking times.
Press the central button for 3 seconds. Then press it again until “dur” appears (figure 3). Press “+”
and “-” to set the required cooking time.
English
End of cooking time
Figure 4
The end of cooking time can also be set.
Press the central button for 3 seconds. Press the central button twice consecutively and wait for
“End” to appear (figure 4). Press “+” and “-” to set the required end of cooking time.
The oven will work in the set mode and at the set temperature until the end of cooking time.
Programming automatic cooking
Figure 5
Cooking function with set times.
Press the central button for 3 seconds. Then press it again until “dur” appears. Press “+” and - to
set the required cooking time. Wait a few seconds for the setting to be memorised.
Press the central button for 3 seconds. Press it another two times and wait for “End” to appear
(figure 4). Press “+” and “-” to set the required end of cooking time.
E.g.:
Current time: 12.30
Cooking time: 10 minutes
End of cooking time: 14.00
The oven will start cooking at 13.50 (14.00 less 00.10) at the set temperature and in the set mode
and will stop at 14.00
The oven will beep when it stops cooking. To disable it, press any button.
Adjusting beep volume
To adjust beep volume, press “+” and “-” together. Then press the central button and wait for “ton1”
(high volume) to flash. Press “-” to select “ton2” (medium volume) or “ton3” (low volume).
Press the central button to set the selected volume.
TOUCH CONTROL TIMER
Uhr einstellen
Abbildung 1
Wird die Uhr zum ersten Mal eingeschaltet, blinken die Symbole „Auto“ und „0:00“. Zur ersten
Zeiteinstellung drücken Sie ungefähr drei Sekunden die mittlere Taste. So wie das Symbol
erscheint, drücken Sie auf die „+“ oder „-“ Taste, um die gewünschte Uhrzeit einzustellen.
Warten Sie, bis ein akustisches Signal die eingestellte Zeit bestätigt (Abbildung 1).
Die eingestellte Uhrzeit kann auch anschließend verändert werden, indem man gleichzeitig die
Tasten „+“ oder „-“ drei Sekunden lang gedrückt hält und die Uhrzeit dann wie oben beschrieben
reguliert.
Minutenzähler
Abbildung 2
Dieser Minutenzähler funktioniert unabhängig von den anderen Ofenfunktionen. Das heißt, dass der
Ofen, nach Ablauf der Zeit, weiterhin funktioniert.
Um den Minutenzähler einzustellen, drücken Sie drei Sekunden lang die mittlere Taste, bis das
Symbol erscheint (Abbildung 2). Durch Betätigen der „+“ oder „-“ Tasten können Sie nun die
gewünschte Zeit einstellen.
Möchten Sie den Minutenzähler erneut einstellen, drücken Sie abermals drei Sekunden lang die
mittlere Taste und stellen Sie die nun gewünschte Zeit ein.
Ein akustisches Signal ertönt, um das Ablaufen der Zeit anzugeben. Drücken Sie auf eine beliebige
Taste, um es auszuschalten.
Backzeit
Abbildung 3
Diese Funktion bezieht sich auf die halb-automatische Backweise und ermöglicht ein Einstellen der
Backzeit.
Drücken Sie drei Sekunden lang auf die mittlere Taste. Drücken Sie erneut auf die mittlere Taste:
es erscheinen die Buchstaben „dur“ (Abbildung 3). Durch Betätigen der „+“ oder „-“ Tasten stellen
Sie nun die gewünschte Backzeit ein.
Deutsch
Ende der Backzeit
Abbildung 4
Man kann auch das Ende der Backzeit einstellen.
Drücken Sie drei Sekunden lang die mittlere Taste. Drücken Sie erneut zwei Male hintereinander
die mittlere Taste, bis die Schrift „End“ (Abbildung 4) erscheint. Durch Betätigen der Tasten „+“ oder
„-“ können Sie nun das gewünschte Ende der Backzeit einstellen.
Der Ofen bleibt somit bis zur gewünschten Zeit mit den eingestellten Funktionen und Temperatur
eingeschaltet.
Einstellen der automatischen Backzeit
Abbildung 5
Backen mit Zeitangabe.
Drücken Sie drei Sekunden lang auf die mittlere Taste, drücken Sie abermals auf die mittlere Taste,
bis die Schrift „dur“ erscheint. Durch Bedienen der Tasten „+ oder „-“ stellen Sie die gewünschte
Backzeit ein. Warten Sie einige Sekunden lang, bis die Zeiteinstellung gespeichert wird.
Drücken Sie abermals drei Sekunden lang die mittlere Taste. Drücken Sie nun zwei Mal
hintereinander auf die mittlere Taste, bis die Schrift „End“ (Abbildung 4) erscheint. Durch Bedienen
der „+“ oder „-“ Tasten stellen Sie schließlich das gewünschte Ende der Backzeit ein.
Beispiel:
Aktuelle Zeit : 12.30
Eingestellte Backzeit : 10 Minuten
Eingestelltes Ende der Backzeit: 14.00
Der Ofen schaltet um 13.50 ein (also 14.00 minus 00.10) und führt die angegebenen Funktionen
unter der gewünschten Temperatur aus. Der Ofen schaltet um 14.00 aus.
Am Ende der Backzeit ertönt ein akustisches Warnsignal. Drücken Sie auf eine beliebige Taste, um
es auszuschalten.
Toneinstellung des Warnsignals
Um die Tonstärke des Warnsignal einzustellen, drücken Sie gleichzeitig auf die „+“ und „-“ Tasten.
Drücken Sie dann die mittlere Taste; es erscheint die blinkende Schrift „ton1“ (lauter Ton). Drücken
Sie erneut auf die Taste „-“ wenn Sie „ton2“ wünschen (mittlerer Ton) oder „ton3“ (leise).
Drücken Sie auf die mittlere Taste um den gewünschten Ton zu speichern.
TIMER TOUCH CONTROL
Regulación del reloj
Figura 1
Al encender el reloj por primera vez aparecerán los símbolos “Auto” y “0:00” intermitentes. Para
efectuar la primera regulación del reloj, pulsar la tecla central por unos 3 segundos. Cuando
aparezca el símbolo pulsar el pulsador “+” o “-“ para regular la hora deseada.
Esperar hasta que una señal acústica indique que la hora está programada (figura 1).
La modificación de la hora programada se puede efectuar más tarde, manteniendo pulsadas
simultáneamente las teclas “+” y “-“ por 3 segundos y regulando la hora del modo arriba explicado.
Cuentaminutos
Figura 2
Es una función de cuentaminutos que no interactúa con el funcionamiento del horno y, por lo tanto,
al final de la cuenta el horno continuará funcionando.
Para efectuar la regulación, pulsar la tecla central por 3 segundos, hasta que aparezca el símbolo
(figura 2). Con los pulsadores “+” y “-” programar el tiempo deseado.
Para las regulaciones sucesivas del cuentaminutos, volver a pulsar la tecla central por 3 segundos
y efectuar la nueva regulación.
Una señal acústica indicará que la cuenta ha finalizado. Para desactivarla, pulsar cualquier tecla.
Duración de la cocción
Figura 3
Es la función de cocción semiautomática. Permite definir los tiempos de duración de la cocción.
Pulsar la tecla central por 3 segundos, volver a pulsar la tecla central y aparecerá la inscripción
“dur” (figura 3). Con los pulsadores “+” y “-” programar el tiempo de cocción deseado.
Español
Fin de la cocción
Figura 4
Se puede programar la hora a la cual finalizará la cocción.
Pulsar la tecla central por 3 segundos. Volver a pulsar la tecla central dos veces consecutivas y
aparecerá la inscripción “End” (figura 4). Con los pulsadores “+” y “-” programar la hora de fin de
cocción deseada.
El horno funcionará con la temperatura y la función predefinidas, hasta la hora establecida.
Programación de la cocción automática
Figura 5
Función de cocción con programación por tiempo definido.
Pulsar la tecla central por 3 segundos, volver a pulsar la tecla central y aparecerá la inscripción
“dur”. Con los pulsadores “+” y “-” programar el tiempo de cocción deseado. Esperar algunos
segundos hasta que se memorice la regulación.
Volver a pulsar la tecla central por 3 segundos. Volver a pulsar la tecla central dos veces
consecutivas y aparecerá la inscripción “End” (figura 4). Con los pulsadores “+” y “-” programar la
hora de fin de cocción deseada.
Ejemplo:
Hora actual: 12.30.
Programación duración de la cocción: 10 minutos.
Programación fin de la cocción: 14.00.
El horno iniciará la cocción a las 13.50 horas (14.00 menos 00.10) con la función y la temperatura
predefinidas y se parará a las 14.00 horas.
Al final de la cocción se emitirá una señal acústica, que se podrá interrumpir pulsando cualquier
tecla.
Regulación de la intensidad de la señal acústica
Para regular la intensidad sonora de la señal acústica, pulsar simultáneamente las teclas “+” y “-”.
Luego pulsar la tecla central y aparecerá la inscripción “ton1” (tonalidad alta) intermitente. Pulsar
repetidas veces la tecla “-” para seleccionar “ton2” (tonalidad media) o “ton3” (tonalidad baja).
Pulsar la tecla central para programar la tonalidad seleccionada.
TIMER TOUCH CONTROL
Regulação do relógio
Figura 1
Quando se acende o forno pela primeira vez aparecem os símbolos “Auto” e “0:00” a piscar. Para
o primeiro acerto do relógio, pressionar a tecla central por aproximadamente 3 segundos. Quando
aparece o símbolo pressionar o botão “+” o “-“ para acertar a hora pretendida.
Aguardar, e um sinal acústico indicará que a hora foi acertada (figura 1).
A modificação da hora acertada pode ser executada sucessivamente mantendo pressionadas, ao
mesmo tempo, as teclas “+” e “-“ por 3 segundos e efectuando a seguir o acerto da hora tal como
anteriormente explicado.
Conta-minutos
Figura 2
É uma função de conta-minutos, que não interage com o funcionamento do forno, por isso no fim
da contagem o forno continuará a funcionar.
Para a programação pressionar a tecla central por 3 segundos, até quando aparece o símbolo
(figura 2). Com os botões “+” e “-“ programar o tempo pretendido.
Para uma sucessiva programação do conta-minutos, pressionar novamente a tecla central por 3
segundos e efectuar a nova programação.
Um sinal acústico indicará o fim da contagem. Para desactivá-lo, pressionar uma tecla qualquer.
Duração da cozedura
Figura 3
É a função de cozedura semi-automática. Permite programar os tempos de duração da cozedura.
Pressionar a tecla central por 3 segundos. Pressionar novamente a tecla central e aparecerá a
escrita “dur” (figura 3). Com os botões “+” e “-“ programar o tempo de cozedura pretendido.
PT
Português
Fim da cozedura
Figura 4
Pode ser programada a hora em que terminará a cozedura
Pressionar a tecla central por 3 segundos. Pressionar novamente a tecla central duas vezes
consecutivas e aparecerá a escrita “End” (figura 4). Com os botões “+” e “-“ programar a hora
pretendida de fim da cozedura.
O forno funcionará com a temperatura e a função predefinidas, até a hora estabelecida.
Programação da cozedura automática
Figura 5
Função de cozedura com programação a tempo definido.
Pressionar a tecla central por 3 segundos. Pressionar novamente a tecla central e aparecerá a
escrita “dur”. Com os botões “+” e “-“ programar o tempo de cozedura pretendido. Aguardar alguns
segundos que a programação seja memorizada.
Pressionar novamente a tecla central por 3 segundos. Pressionar novamente a tecla central duas
vezes consecutivas e aparecerá a escrita “End” (figura 4). Com os botões “+” e “-“ programar a
hora pretendida de fim da cozedura.
Exemplo :
Hora actual: 12.30
Programação de duração da cozedura : 10 minutos
Programação do fim da cozedura : 14.00
O forno iniciará a cozedura às 13.50 (14.00 menos 00.10) com a função e a temperatura
predefinidas e terminará às 14.00
No fim da cozedura será emitido um sinal acústico, que poderá ser interrompido pressionando uma
tecla qualquer.
Regulação da intensidade do sinal acústico
Para regular a intensidade sonora do sinal acústico, pressionar simultaneamente as teclas “+” e “-“.
Em seguida, pressionar a tecla central, e aparece a escrita “ton1” (tonalidade alta) a piscar. Em
seguida, pressionar repetidamente a tecla “- para seleccionar “ton2” (tonalidade média) ou “ton3”
(tonalidade baixa).
Pressionar a tecla central para programar a tonalidade seleccionada.
TIMER TOUCH CONTROL
Instelling van de klok
Figuur 1
Bij de eerste keer aanzetten knipperen de symbolen “Auto” en “0:00”. Om de klok de eerste keer in
te stellen moet u de middelste toets ongeveer 3 seconden lang ingedrukt houden. Als het symbool
verschijnt moet u de toets “+” of “-“ indrukken om de juiste tijd in te stellen.
Daarna moet u wachten totdat een geluidssignaal signaleert dat de tijd ingesteld is (figuur 1).
De ingestelde tijd kan later veranderd worden door de toetsen “+” en “-“ 3 seconden lang ingedrukt
te houden waarna u de tijd kunt instellen zoals hiervoor uitgelegd.
Minutenteller
Figuur 2
Dit is een minutentelfunctie die geen invloed heeft op de werking van de oven, dus na afloop van de
telling blijft de oven functioneren.
Om de minutenteller in te stellen moet u de middelste toets 3 seconden lang ingedrukt houden
totdat het symbool verschijnt (figuur 2). Stel met de toetsen “+” en “-“ de gewenste tijd in.
Om de minutenteller later opnieuw in te stellen moet u de middelste toets weer 3 seconden lang
ingedrukt houden en hem opnieuw instellen.
Een geluidssignaal signaleert het einde van de telling. Om het geluidssignaal uit te schakelen moet
u op een willekeurige toets drukken.
Duur van de baktijd
Figuur 3
Dit is de halfautomatische bakfunctie. Hiermee is het mogelijk om de tijdsduur van het bakken te
bepalen.
Houd de middelste toets 3 seconden lang ingedrukt. Druk nogmaals op de middelste toets waarna
de aanduiding “dur” (figuur 3) verschijnt. Stel met de toetsen “+” en-“ de gewenste baktijd in.
Nederlands
Einde van de baktijd
Figuur 4
De tijd waarop het bakken eindigt kan ingesteld worden.
Houd de middelste toets 3 seconden lang ingedrukt. Druk nogmaals twee keer achter elkaar op de
middelste toets waarna de aanduiding “End” (figuur 4) verschijnt. Stel met de toetsen “+” en “-“ het
gewenste einde van de baktijd in.
De oven zal tot de ingestelde tijd op de vooringestelde temperatuur en functie functioneren.
Programmering van het automatische bakproces
Figuur 5
Bakfunctie met programmering voor bepaalde tijd.
Houd de middelste toets 3 seconden lang ingedrukt. Druk nogmaals op de middelste toets waarna
de aanduiding “dur” verschijnt. Stel met de toetsen “+” en -“ de gewenste baktijd in. Wacht een
paar seconden totdat de instelling in het geheugen opgeslagen wordt.
Houd de middelste toets nogmaals 3 seconden lang ingedrukt. Druk nogmaals twee keer achter
elkaar op de middelste toets waarna de aanduiding “End” (figuur 4) verschijnt. Stel met de toetsen
“+” en “-“ het gewenste einde van de baktijd in.
Bijvoorbeeld:
Huidige tijd: 12.30
Ingestelde duur van het bakproces: 10 minuten
Ingestelde einde van het bakproces: 14.00
De oven begint om 13.50 uur (14.00 min 00.10) met het bakproces op de vooringestelde
temperatuur en functie en zal om 14.00 uur stoppen.
Aan het einde van het bakproces wordt een geluidssignaal afgegeven dat uitgeschakeld kan
worden door op een willekeurige toets te drukken.
Instelling van de sterkte van het geluidssignaal
Om de sterkte van het geluidssignaal in te stellen moet u de toetsen “+” en “-“ gelijktijdig ingedrukt
houden. Druk daarna op de middelste toets, waarna de aanduiding “ton1” (hoge toon) gaat
knipperen. Druk daarna herhaaldelijk op de toets “-“ om “ton2” (gemiddelde toon) of “ton3” (lage
toon) te kiezen.
Druk op de middelste toets om de gewenste toon in te stellen.
MINUTEUR À TOUCHES SENSITIVES
Réglage de la pendule
Figure 1
Lors de la première utilisation de l’appareil, l’affichage fera apparaître le symbole « Auto » et la
valeur « 0:00 » en mode clignotant. Pour effectuer le réglage initial de la pendule, exercez une
pression de plus de 3 secondes sur la touche centrale. Lorsque le symbole apparaît, réglez
l’heure en utilisant les touches “+” ou “-“.
Attendre qu’un signal acoustique indique que le réglage de l’heure a été pris en compte (figure 1).
Pour modifier le réglage de l’heure par la suite, entrez en mode de configuration en appuyant
simultanément sur les touches “+” et “-“ et procédez ensuite comme indiqué ci-dessus.
Minutage
Figure 2
Cette fonction est une fonction de minutage indépendante, sans interaction avec le four, qui
continuera par conséquent à fonctionner normalement au terme du minutage.
Pour régler le minuteur, exercez une pression de plus de 3 secondes sur la touche centrale pour
faire apparaître le symbole (figure 2) puis utilisez les touches “+” et “-“ pour programmer la
durée désirée.
Pour modifier la durée programmée, exercez une pression de plus de 3 secondes sur la touche
centrale et réglez à nouveau le minuteur.
À l'expiration de la durée programmée, le minuteur émettra un signal acoustique. Pour
l’interrompre, appuyez sur l’une des touches de l’appareil.
Durée de la cuisson
Figure 3
C’est une fonction de cuisson semi-automatique. Elle permet de programmer la durée de la
cuisson.
Exercez une pression de plus de 3 secondes sur la touche centrale puis appuyez à nouveau sur
cette même touche pour faire apparaître la mention “dur” (figure 3). Utilisez les touches “+” et “-“
pour régler la durée de cuisson désirée.
Français
Fin de cuisson
Figure 4
Cette fonction permet de régler l’heure de fin de cuisson.
Exercez une pression de plus de 3 secondes sur la touche centrale puis appuyez à nouveau par
deux fois sur cette même touche pour faire apparaître la mention “End” (figure 4). Utilisez les
touches “+” et “-“ pour régler l’heure de fin de cuisson désirée.
Le four fonctionnera à la température et dans le mode sélectionnés jusqu’à l’heure indiquée.
Programmation de la cuisson automatique
Figure 5
Cette fonction permet de programmer l’heure de début et de fin de cuisson.
Exercez une pression de plus de 3 secondes sur la touche centrale puis appuyez à nouveau sur
cette même touche pour faire apparaître la mention “dur”. Utilisez les touches “+” et “-“ pour régler
la durée de cuisson désirée. Attendre un instant que la durée soit mémorisée.
Exercez à nouveau une pression de plus de 3 secondes sur la touche centrale et appuyez à
nouveau par deux fois sur cette même touche pour faire apparaître la mention “End” (figure 4).
Utilisez les touches +” et “-“ pour régler l’heure de fin de cuisson désirée.
Exemple :
Heure actuelle : 12 h 30
Réglage durée de cuisson : 10 minutes
Réglage heure de fin de cuisson 14 h 00
Le four commencera la cuisson à 13 h 50 (14 h 00 moins 00 h 10), dans le mode et à la
température sélectionnés, et s’arrêtera à 14 h 00.
En fin de cuisson, l’appareil émettra un signal acoustique, qui pourra être interrompu en appuyant
sur l’une des touches de l’appareil.
Réglage du volume du signal acoustique
Pour régler le volume de la sonnerie, appuyez simultanément sur les touches “+” et “-“. Appuyez sur
la touche centrale pour faire clignoter la mention “ton1 (fort). Utilisez ensuite la touche “-“ pour
passer à “ton2” (moyen) puis à “ton3” (faible).
Appuyez sur la touche centrale pour mémoriser le volume sélectionné.
cod. 2.000.63.0 - 2°ed
Warranty Card
Worldwide Appliances Pty Limited
A.B.N. 45868077422
Oce:
48-50 Moore Street, Leichhardt N.S.W 2040
Post:
Locked Bag 3000, Annandale, N.S.W 2038
P: 1300 694 583
WARRANTY REGISTRATION
Your ongoing satisfaction with your artusi
product is important to us. We ask that you
complete the enclosed Warranty Registration
Card and return it to us so that we have a record
of the artusi product purchased by you.
PRIVACY
Worldwide Appliances respects your
privacy and is committed to handling your
personal information in accordance with the
National Privacy Principles and the Privacy
Act 1988 (Cth). A copy of the Worldwide
Appliances Privacy Policy is available at
www.artusi.com.au. Worldwide Appliances will
not disclose any personal information set out
in the Warranty Registration Card (“Personal
Information”) without your consent unless
required by:
1. law;
2. any Worldwide Appliances related company;
3. any service provider which provide services
to artusi or assist artusi in providing services
(including repair and warranty services) to
customers. Our purpose in collecting the
Personal Information is
to keep a record of the artusi product purchased
by you, in order to provide a better warranty
service to you in the unlikely event that there is
a problem with your artusi product. Worldwide
Appliances may contact you at any one or more
of the address, email address or telephone
numbers set out in the Warranty Registration
Card. Please contact artusi on 1300 694
583 should you not wish to be contacted by
Worldwide Appliances.
WARRANTY
1. Warranty
Worldwide Appliances warrants that each artusi
product will remain, for a period of either 12
months or 24 months of warranty. All Warranties
are valid from the original date of purchase, And
warranty claims must be accompanied by the
proof of purchase.
24 months warranty products:
All Built-in Appliances – Limited to Ovens,
Gas, Induction and Electric Cooktops, and All
Rangehoods
Freestanding Cookers - Gas and Electric Models
(900mm Width)
artusi.com.au
Dishwashers - Freestanding, Fully Integrated,
Semi Integrated and built-in
12 months warranty products:
Freestanding Cookers - Gas and Electric Models
in 50cm, 54cm and 60cm Widths
Portable Appliances* – Benchtop Models and
Portable Gas Models
2. What is not Covered by the Warranty.
The Warranty does not apply if an artusi product
is defective by a factor other than a defect arising
in the manufacture of the artusi product, including
but not limited to:
(a) damage through misuse (including failure
to maintain, service or use with proper care),
neglect, accident or ordinary wear and tear
(including deterioration of parts and accessories
and glass breakage);
(b) use for purpose for which the artusi product
was not sold or designed;
(c) use or installation which is not in accordance
with any specied instructions for use or
installation;
(d) use or operation after a defect has occurred or
been discovered;
(e) damage through freight, transportation or
handling in transit (other than when Worldwide
Appliances is responsible);
(f) damage through exposure to chemicals, dusts,
residues, excessive voltage, heat, atmospheric
conditions or other forces or environmental
factors outside the control or Worldwide
Appliances;
(g) repair, modication or tampering by the
purchaser or any person other than Worldwide
Appliances, an employee of Worldwide
Appliances or an authorised artusi service
contractor*;
(h) use of parts, components or accessories
which have not been supplied or specically
approved by artusi.
(i) damage to surface coatings caused by cleaning
or maintenance using products not recommended
in the artusi product handbook provided to the
purchaser upon purchase of the artusi product;
(j) damage to the base of an electric oven due to
items having been placed on the base of the oven
cavity or covering the base, such as aluminium
foil (this impedes the transfer of heat from the
element to the oven cavity and can result in
irreparable damage); or
(k) damages, dents or other cosmetic
imperfections not aecting the performance of the
artusi in respect of an artusi product purchased
as a “factory second” or from display
The Warranty does not extend to light globes
used in artusi products.
3. Domestic Use
Each artusi product is made for domestic use.
This Warranty may not extend to artusi products
used for commercial purposes.
Continued over...
4
Please complete and send to ARTUSI at: REPLY PAID 83617
LEICHHARDT NSW 2040
Last Name: First Name:
Address:
State: Postcode: Email:
Home Phone: Mobile:
Purchase Date: / / (Please attach proof of purchase to validate warranty)
MODEL NUMBER SERIAL NUMBER
(if you cannot locate the serial number please call ARTUSI on 1300 694 583)
1
2
3
4
WARRANTY REGISTRATION CARD
01052013
01032014
4. Time for Claim under the Warranty
You must make any claim under this Warranty
within twenty eight (28) days after the occurrence
of an event which gives rise to a claim pursuant
to the Warranty, by booking a service call on the
telephone number below.
5. Proof of Purchase
Customers must retain proof of purchase in order
to be eligible to make a warranty claim in respect
of an artusi product.
6. Claiming under the Warranty
Customers will bear the cost of claiming under
this Warranty unless Worldwide Appliances
determines the expenses are reasonable, in which
case the customer must claim those expenses
by providing written evidence of each expense
to Worldwide Appliances at the address on the
Warranty Registration Card.
7. Statutory Rights
(a) These terms and conditions do not aect your
statutory rights.
(b) The limitations on the Warranty set out in this
document do not exclude or limit the application
of the consumer guarantees set out in the Act or
any other equivalent or corresponding legislation
in the relevant jurisdiction where to do so would:
(i) contravene the law of the relevant jurisdiction;
or
(ii) cause any part of the Warranty to be void.
(c) Worldwide Appliances excludes indirect or
consequential loss of any kind (including, without
limitation, loss of use of the artusi product) and
(other than expressly provided for in these terms
and conditions) subject to all terms,
conditions and warranties implied by custom, the
general law, the Act or other statute.
(d) The liability of Worldwide Appliances to you
for a breach of any express or non-excludable
implied term, condition or warranty is limited at
the option of Worldwide Appliances to:
(i) replacing or repairing the defective part of the
artusi product;
(ii) paying the cost of replacing or repairing the
defective part of the artusi product;
(iii) replacing the artusi product; or
(iv) paying the cost of replacing the artusi
product.
(e) Our goods come with guarantees that cannot
be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund
for a major failure and for compensation for any
other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a
major failure.
8. Defects
Any part of an artusi product deemed to be
defective and replaced by Worldwide Appliances
is the property of Worldwide Appliances.
Worldwide Appliances reserves the right to
inspect and test artusi products in order to
determine the extent of any defect and the
validity of a claim under the Warranty.
*To locate your closest artusi authorised service
agent please contact us on 1300 652 100 or visit
www.artusi.com.au
ALL SERVICE CALLS MUST BE BOOKED
THROUGH AN AUTHORISED DEALER OR
WARRANTY DEPARTMENT ON 1300 652 100
OR stokesaps.com.au/artusi-service
01032014
Warranty Card continued artusi.com.au
Warranty Card tear off
ARTUSI.COM.AU
P: 1300 649 583
NSW & ACT (HEAD OFFICE)
48-50 MOORE STREET
LEICHHARDT
F 02 8569 4699
QLD
1/42 CAVENDISH ROAD
COORPAROO
F 07 3397 0850
VIC, TAS & SA
1211 TOORAK ROAD
CAMBERWELL
F 03 9809 2155
WA & NT
UNIT 10/55 HOWE STREET
OSBORNE PARK
F 08 9201 9188
NZ
PO BOX 11.160
SOCKBURN CHRISTCHURCH
F 03 344 5906
ARTUSI OFFICES ARE OPEN DAILY FROM 9AM–5PM AND SATURDAYS 10AM–4PM
DISCLAIMER
Worldwide Appliances PTY LTD, trading as ARTUSI, is continually seeking ways to improve the design specifications, aesthetics and production
techniques of its products. As a result alterations to our products and designs take place continually. Whilst every effort is made to produce
information and literature that is up to date, this brochure should not be regarded as an infallible guide to the current specifications, nor does it
constitute an offer for the sale of any particular product. Product dimensions indicated in our literature is indicative only. Actual product only
should be used to define dimension cutouts. Distributors, and retailers are not agents of ARTUSI and are not authorised to bind ARTUSI by any
express or implied undertaking or representation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58

Artusi AO750X Handleiding

Type
Handleiding

Gerelateerde artikelen