Yamaha RX-V367 de handleiding

Merk: Yamaha

Model: RX-V367

Categorie: AV-ontvangers

Type: de handleiding

Owner’s Manual

AV Receiver English for Europe

En 2

CONTENTS

INTRODUCTION

Features and capabilities ...................................................3

About this manual............................................................. 4

Supplied accessories......................................................... 4

Part names and functions.................................................. 5

Front panel........................................................................5

Rear panel.........................................................................6

Front panel display ........................................................... 7

Remote control .................................................................8

CONNECTIONS

Connecting speakers ..........................................................9

Speaker channels and functions........................................ 9

Speaker layout ................................................................ 10

Connecting speakers.......................................................10

Connecting external devices............................................ 12

Cable plugs and jacks .....................................................12

Connecting a TV monitor...............................................13

Connecting BD/DVD players and other devices............15

Connecting video cameras and portable audio players .. 19

Transmitting input A/V to external devices.................... 19

Connecting the FM/AM antennas ..................................20

Set up the speaker parameters automatically

(YPAO) .............................................................................. 21

PLAYBACK

Basic playback procedure ...............................................25

Adjusting high/low-frequency sound (Tone control) ..... 25

Changing input settings with a single key

(SCENE function) ............................................................26

Registering input sources/sound field program .............. 26

Enjoying sound field programs....................................... 26

Selecting sound field programs and sound decoders...... 26

Sound field programs .....................................................28

FM/AM tuning ................................................................. 30

Selecting a frequency for reception (Normal tuning)..... 30

Registering and recalling a frequency (Preset tuning) ... 31

Clearing preset stations .................................................. 32

Radio Data System tuning.............................................. 32

SETUP

Configuring the settings specific for each input source

(Option menu) .................................................................. 34

Option menu display and setup ...................................... 34

Option menu items ......................................................... 34

Setting various functions (Setup menu)......................... 36

Setup menu display and settings .................................... 36

Setup menu items ........................................................... 36

Manages settings for speakers........................................ 37

Setting the audio output function of this unit................. 40

Making the receiver easier to use ................................... 42

Setting sound field program parameters......................... 43

Prohibiting setting changes ............................................ 43

Setting sound field program parameters ....................... 44

Setting sound field parameters ....................................... 44

Extended functionality that can be configured

as needed (Advanced Setup menu)................................. 46

Displaying/Setting the Advanced Setup menu............... 46

Avoiding crossing remote control signals when using

multiple Yamaha receivers ............................................. 46

Initializing various settings for this unit......................... 46

APPENDIX

Troubleshooting ............................................................... 47

General ........................................................................... 47

HDMI™ ......................................................................... 49

Tuner (FM/AM) ............................................................. 50

Remote control ............................................................... 51

Glossary ............................................................................ 52

Audio information .......................................................... 52

Sound field program information ................................... 52

Video information .......................................................... 53

Information on HDMI™................................................. 54

About trademarks ........................................................... 54

Specifications.................................................................... 55

Index ................................................................................. 56

En 3

INTRODUCTION

■ Built-in high-quality, high-power 5-channel amplifier

■ 1-button input/sound field program switching (SCENE function) .......................26

■ Speaker connections for 2- to 5.1-channel configurations

– Speaker channels and functions .................................................................................................................9

– Speaker layout..........................................................................................................................................10

– Speaker cable connection.........................................................................................................................10

– Subwoofer cable connection ....................................................................................................................11

■ Acoustic parameter adjustment to match your speakers and listening

environment

– Automatic settings for speaker acoustic parameters

(YPAO - Yamaha Parametric Room Acoustic Optimizer).......................................................................21

– Specifying the settings for each speaker ..................................................................................................37

– Volume control for each speaker..............................................................................................................38

– Speaker distance settings .........................................................................................................................38

– Sound quality control with the equalizer <Graphic Equalizer> ..............................................................39

– Test tone speaker adjustment ...................................................................................................................39

– Bass and treble level adjustment <Tone Control> ...................................................................................25

■ External device connection and playback

– Cables and input/output jacks for this unit ..............................................................................................12

– TV connection..........................................................................................................................................13

– TV audio playback through this receiver.................................................................................................14

– Connections for BD/DVD players (recorders) and other devices............................................................15

– Audio signal output to the TV connected via the HDMI jack .................................................................41

– Correction of lag between audio and video signals <Lipsync>...............................................................40

– External audio and video recorder connections .......................................................................................19

– HDMI/AV video input combining other audio input...............................................................................35

– Front panel external device connections (for video cameras, portable music players, etc.)....................19

– Protective cover for front panel jacks ........................................................................................................4

– Changing the input source names <Input Rename> ................................................................................42

– Configuring the settings specific for each input source <Option menu> ................................................34

– Playback from external devices ...............................................................................................................25

■ FM/AM Tuner

– FM/AM broadcast listening .....................................................................................................................30

– Simple preset tuning ................................................................................................................................31

– Radio Data System tuning .......................................................................................................................32

– Automatic traffic information reception ..................................................................................................33

■ Multi-channel, multi-format playback

– Sound field effect selection......................................................................................................................26

– Playback without sound field effects .......................................................................................................27

– Stereo playback........................................................................................................................................27

– Sound field effect configuration ..............................................................................................................44

– Compressed-music playback ...................................................................................................................26

■ Front panel information display

– Front panel display information switching ................................................................................................7

– Front panel display brightness adjustment <Dimmer>............................................................................43

– Digital video/audio signal information display <Signal Info> ................................................................35

■ Volume/sound quality adjustment functions

– Easy listening at low volumes <Adaptive DRC> ....................................................................................40

– Maximum volume settings.......................................................................................................................41

– Startup volume settings............................................................................................................................41

– Adjusting volume between input sources <Volume Trim> .....................................................................34

■ Remote control operation

– Remote control names and functions.........................................................................................................8

– Insert batteries into the remote control ......................................................................................................4

– Multiple Yamaha receiver operation without signal interference <Remote ID Switching>....................46

■ Other features

– Standby mode after prolonged non-operation <Auto Power Down function>........................................43

– Standby mode after a specific amount of time <Sleep timer>...................................................................8

– Initializing various settings for this unit ..................................................................................................46

– Prohibiting setting changes <Memory Guard>........................................................................................43

Features and capabilities

En 4

INTRODUCTION

Features and capabilities

About this manual

Supplied accessories

Check that you received all of the following parts.

• Remote control

• Batteries (AAA, R03, UM-4) x 2

• YPAO microphone

• AM loop antenna

• Indoor FM antenna

• VIDEO AUX input cover

• This manual is printed prior to production. Design and

specifications are subject to change in part as a result of

improvements, etc. In case of differences between the manual and

product, the product has priority.

• “

cHDMI1” (example) indicates the name of the parts on the

remote control. Refer to the “Part names and functions” (☞

p. 5)

for the information about each position of the parts.

• J

1 indicates that the reference is in the footnote. Refer to the

corresponding numbers on the bottom of the page.

• ☞

indicates the page describing the related information.

• Click on the “ ” at the bottom of the page to display the

corresponding page in “Part names and functions.”

Front panel

Rear panel

Front panel display

Remote control

■ Attaching the VIDEO AUX input cover (included)

To protect against dust, attach the supplied VIDEO AUX input

cover to the VIDEO AUX jacks when you do not use the jacks.

To remove the cover, push the left section of it.

Attach the cover

PUSH

Remove the cover

■ Installing batteries in the remote control

When inserting batteries in the remote control, remove the

battery compartment cover from the reverse side of the remote

control, and insert two AAA batteries into the battery

compartment so that they match with the polarity markings (+

and -).

Replace the batteries with new ones if the following symptoms

become evident:

• The remote control can only be operated within a narrow range.

•

bTRANSMIT does not light up, or only lights dimly.

NOTE

If there are remote control codes for external components

registered to the remote control, removing the batteries for more

than two minutes, or leaving exhausted batteries in the remote

control, the remote control codes may be cleared. If this should

occur, replace the batteries with new ones, and set the remote

control codes.

Battery compartment

cover

Battery compartment

En 5

INTRODUCTION

Front panel

a A (Power)

Switches this unit between on and standby modes.

b YPAO MIC jack

Connect the supplied YPAO microphone and adjust the speaker

balance automatically (☞

p. 21).

c INFO

Changes the information shown on the front panel display (☞

p. 7).

d MEMORY

Registers FM/AM stations as preset stations (☞

p. 31). J1

e PRESET j / i

Selects an FM/AM preset station (☞

p. 32). J1

f FM

Sets the FM/AM tuner band to FM (☞

p. 30). J1

g AM

Sets the FM/AM tuner band to AM (☞

p. 30). J1

h TUNING jj / ii

Changes FM/AM tuner frequencies (☞

p. 30). J1

i Front panel display

Displays information on this unit (☞

p. 7).

j PHONES jack

For plugging headphones in. Sound effects applied during playback

can also be heard through the headphones.

k INPUT l / h

Selects an input source from which to playback. Press either the left or

right key repeatedly to cycle through the input sources in order.

l SCENE

Switches the input source and the sound field program with a single

button (☞

p. 26). Press this key when this unit is in standby mode to

switch on the unit.

m TONE CONTROL

Adjusts high-frequency/low-frequency output of speakers/headphones

(☞

p. 25).

n PROGRAM l / h

Switches between the sound field effect (sound field program) you are

using and the surround sound decoder (☞

p. 26). Press either the left

or right key repeatedly to cycle through the input sources in order.

o STRAIGHT

Changes a sound field program to straight decoding mode (☞

p. 27).

p VIDEO AUX jacks

For connecting video cameras, game consoles, and portable music

players to this unit temporarily.

Attach the supplied VIDEO AUX input cover when not using this

jack.

q VOLUME

Adjusts the volume level.

Part names and functions

VIDEO

AUX

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

VOLUME

DVD

RADIO

INPUT

PROGRAM

SCENE

VIDEO

AUDI O

PORTABLE

INFO

MEMORY

PRESET

FM AM

TUNING

YPAO MIC

m ok n

lj q

c fe gd h

1 : Usable when you have selected tuner input.

En 6

INTRODUCTION

Part names and functions

Rear panel

a HDMI OUT jack

For connecting an HDMI - compatible TV to output audio/video

signals to (☞

p. 13).

b HDMI1-4 jacks

For connecting external components equipped with HDMI-

compatible outputs to receive audio/video signals from (☞

p. 15).

c ANTENNA jacks

For connecting AM and FM antennas (☞

p. 20).

d COMPONENT VIDEO jacks

For connecting TV that are compatible with component video signals,

using three cables to output video signal (☞

p. 13).

e AV1-5 jacks

For connecting to external devices equipped with audio/video outputs

so that this unit can receive audio/video signals (☞

p. 16, p. 17).

f AV OUT jacks

For outputting audio/video signals received when analog inputs (AV3-

5 or AUDIO1-2) are selected (☞

p. 19).

g AUDIO1-2 jacks

For connecting to external components equipped with analog audio

outputs to input sound into this unit (☞

p. 18).

h MONITOR OUT jack

For connecting a TV capable of receiving video input, and outputting

video signals to it (☞

p. 14).

i AUDIO OUT jacks

For outputting audio signals received when analog inputs such as the

AV5 or AUDIO1-2 jacks are selected (☞

p. 19).

j SUBWOOFER jack

For connecting a subwoofer with a built-in amplifier (☞

p. 11).

k SPEAKER terminals

For connecting the front, center, and surround speakers (☞

p. 11).

l Power cord

For connecting this unit to an AC wall outlet.

ANTENNA

GND

COMPONENT

VIDEO

OPTICAL

(

)

AUD

IO 1

AUD

IO 2

COAXIAL

(

)

COAXIAL

OPTICAL

VIDEO

CENTER

SURROUND

HDMI 1

(

BD/DVD

)

HDMI 2 HDMI 3

HDMI 4

FRONT

COMPONENT

VIDEO

MONITOR OUT

HDMI

OUT

MONITOR OUT

OUT

SUBWOOFER

AUDIO

OUT

SPEAKERS

COMPONENT

VIDEO

MONITOR OUT

HDMI

OUT

MONITOR OUT

OUT

SUBWOOFER

ANTENNA

NENT

VIDE

PTI

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

IO 1

IO 2

AXIA

(

)

COAXIA

PTI

VIDE

URR

HDMI 1

(

BD/DVD

)

HDMI 2

HDMI

ef jgi k

d h

Distinguishing the input and output jacks

The area around the audio/video output jacks is

marked in white to prevent connection errors.

Use these jacks to output audio/video signals

to a TV or other external component.

Output jacks

En 7

INTRODUCTION

Part names and functions

Front panel display

a HDMI indicator

Lights up during normal HDMI communication when any of the

HDMI 1-4 inputs are selected.

b CINEMA DSP indicator

Lights up when a sound field effect that uses CINEMA DSP

technology is selected.

c Tuner indicator

Lights up when receiving an FM/AM broadcast.

d SLEEP indicator

Lights up when the sleep timer is activated (☞

p. 8).

e MUTE indicator

Flashes when audio is muted.

f VOLUME indicator

Displays the current volume level.

g Cursor indicators

Light up if corresponding cursors on the remote control are available

for operations.

h Multi information display

Displays a range of information on menu items and settings.

i Speaker indicators

Indicate speaker terminals from which signals are output.

SL SR

Front speaker L

Surround speaker L

Subwoofer

Front speaker R

Surround speaker R

Center speaker

■ Changing the front panel display

The front panel can display sound field programs and surround

decoder names as well as the active input source.

Press eINFO repeatedly to cycle through input source →

sound field program → surround decoder in order. J1

SL SR

Straight

HDMI1

VOL .

Input source name

Sound field program (DSP program)

STEREO

SLEEP

VOL.

TUNED

SL SR

MUTE

abcdfe

gh ig

1 : While selecting a tuner input, the FM/AM frequency is displayed instead of the input source.

En 8

INTRODUCTION

Part names and functions

Remote control

a Remote control signal transmitter

Transmits infrared signals.

b TRANSMIT

Lights up when a signal is output from the remote control.

c Input selector

Select an input source on this unit from which to playback.

d Tuner keys

Operates the FM/AM tuner. These keys are used when using the tuner

input.

e INFO

Cycles the information displayed on the front panel display (the name

of the currently selected input source, the sound field program, the

surround decoder, the FM/AM tuner frequency, etc.)(☞

p. 7).

f Sound selection keys

Switch between the sound field effect (sound field program) you are

using and the surround decoder (☞

p. 26).

g SCENE

Switches the input source and the sound field program with a single

button (☞

p. 26). Press this key when this unit is in standby mode to

switch on the unit.

h SETUP

Displays a detailed Setup menu for this unit (☞

p. 36).

i Cursor B / C / D / E, ENTER, RETURN

j RECEIVER A (RECEIVER Power)

Switches this unit between on and standby modes.

k SLEEP

Sets this unit to place itself in standby mode automatically after a

specified period of time has elapsed (sleep timer). Press this key

repeatedly to set the time for the sleep timer function. The front panel

display indicator lights up when the sleep timer is activated.

l OPTION

Displays the Option menu for each input source (☞

p. 34).

m VOLUME +/-

Adjusts the volume level (☞

p. 25).

n MUTE

Turns the mute function of the sound output on and off (☞

p. 25).

RECEIVER

SCENE

OPTION

SETUP

RETURN

VOLUME

ENHANCER

SUR. DECODE

STRAIGHT

HDMI

AUDIO

TRANSMIT

SLEEP

1234

125

V-AU X

TUNER

INFO

MEMORY

PRESET

TUNING

MOVIE MUSIC

STEREO

DVD

RADIO

MUTE

ENTER

HDMI1-4 HDMI1-4 jacks

AV1-5 AV1-5 jacks

AUDIO1-2 AUDIO1-2 jacks

V-AUX Front panel VIDEO AUX jacks

TUNER FM/AM tuner

FM Sets the FM/AM tuner band to FM.

AM Sets the FM/AM tuner band to AM.

MEMORY Presets radio stations.

PRESET F / G Selects a preset station.

TUNING H / I Changes tuning frequencies.

Cursor B / C / D / E Select menu items and change settings when

settings menus, etc are displayed.

ENTER Confirms a selected item.

RETURN Returns to the previous screen when setting

menus are displayed, or ends the menu display.

Sleep 120min. Sleep 90min.

Sleep 60min.Sleep 30min.Sleep Off

En 9

CONNECTIONS

This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and

connections in your listening environment.

Speaker channels and functions

■

Front left and right speakers

The front speakers are used for the front channel sounds (stereo sound) and effect sounds.

Front speaker layout:

Place these speakers at an equal distance from the ideal listening position in the front of the room.

When using a projector screen, the appropriate top positions of the speakers are about 1/4 of the screen

from the bottom.

■

Center speaker

The center speaker is for the center channel sounds (dialog, vocals, etc.).

Center speaker layout:

Place it halfway between the left and right speakers. When using a TV, place the speaker just above or

just under the center of the TV with the front surfaces of the TV and the speaker aligned.

When using a screen, place it just under the center of the screen.

■

Surround left and right speakers

The surround speakers are for effect and vocal sounds with the 5.1-channel speakers providing rear-

area sounds.

Surround speaker layout:

Place the speakers at the rear of the room on the left and right sides facing the listening position. They

should be placed between 60 degrees and 80 degrees from the listening position and with the speaker

tops at a height of 1.5 – 1.8 m from the floor.

■

Subwoofer

The subwoofer speaker is used for bass sounds and low-frequency effect (LFE) sounds included in

Dolby Digital and DTS. Use a subwoofer that is equipped with an internal amplifier.

Subwoofer speaker layout:

Place it exterior to the front left and right speakers facing slightly inward to reduce echoes from the

wall.

Connecting speakers

Ex.

En 10

CONNECTIONS

Connecting speakers

Speaker layout

5.1-channel speaker layout (5 speakers + subwoofer)

Connecting speakers

Connect your speakers to their respective terminals on the rear panel.

• Connect at least two speakers (front left and right).

• If you cannot connect all five speakers, give priority to the surround speakers.

• The surround speakers should be placed between 60 degrees and 80 degrees from the listening position.

■ CRT monitors

We recommend that you use magnetically shielded speakers to avoid video distortion, especially for

the front and center speakers near the screen.

If your screen still gets interference from magnetically shielded speakers, move the speakers farther

away from your TV.

60q

80q

Front speaker R

Front speaker L

Center speaker

Surround speaker L

Surround

speaker R

Subwoofer

CAUTION

• Remove the AC power cord of this unit from the power outlet before connecting the speakers.

• Generally speaker cables consist of two parallel insulated cables. One of these cables is a different

color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined)

cable into the “+” (positive, red) terminal on this unit and the speakers, and the other cable into the “-”

(minus, black) terminal.

• Be careful that the core of the speaker cable does not touch anything or come into contact with the metal

areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit,

“CHECK SP WIRES!” will appear on the front panel display when this unit is switched on.

ANTENNA

GND

AUDI O

CENTER

SURROUND

DMI 4

FRONT

R OUT

SUBWOOFER

AUDI O

OUT

SPEAKERS

R L

Surround speaker

Front speaker

Subwoofer Center speaker

En 11

CONNECTIONS

Connecting speakers

■

Connecting front speakers

Remove approximately 10mm of insulation from the

ends of the speaker cables, and twist the bare wires

of the cables together firmly so that they will not

cause short circuits.

Loosen the speaker terminals.

Insert the bare wire of the speaker cable into the gap

on the side of the terminal.

Tighten the terminal.

■

Connecting center speakers / surround

speakers

Press the tab on the speaker terminal down.

Insert the speaker cable end into the terminal.

Lift the tab to fix the speaker cable in place.

■

Connecting the subwoofer

Connect the subwoofer input jack to the

SUBWOOFER jack on this unit with an audio pin

cable.

Set the subwoofer volume as follows.

Volume: Set to approximately half volume (or slightly less than

half).

Crossover frequency (if available): Set to maximum.

Connecting the banana plug (Except U.K., Europe,

Asia and Korea models)

Tighten the knob, and then insert the banana plug into the end of

the terminal.

FRONT

KERS

FRONT

KERS

Banana plug

CENTER

SURROUND

SPEAKE

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Subwoofer examples

En 12

CONNECTIONS

Cable plugs and jacks

The main unit is equipped with the following input/output jacks. Use jacks and cables appropriate for

components that you are going to connect.

■

Audio/Video jacks

HDMI jacks

Digital video and digital sound are transmitted through a single jack.

Only use an HDMI cable.

■

Analog video jacks

■

Audio jacks

Connecting external devices

• Use a 19-pin HDMI cable with the HDMI logo.

• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.

COMPONENT VIDEO jacks

The signal is separated into three components:

luminance (Y), chrominance blue (P

B), and

chrominance red (P

R).

Use component video pin cables with three plugs.

VIDEO jack

This jack transmits conventional analog video

signals.

Use video pin cables.

HDMI cable

Component video pin cable

Video pin cable

OPTICAL jacks

These jacks transmit optical digital audio signals.

Use fiber-optic cables for optical digital audio

signals.

COAXIAL jacks

These jacks transmit coaxial digital audio signals.

Use pin cables for digital audio signals.

AUDIO jacks

These jacks transmit conventional analog audio

signals.

Use stereo pin cables, connecting the red plug to

the red R jack, and the white plug to the white L

jack.

PORTABLE jack

This jack transmits conventional analog audio

signals.

Use a stereo mini-plug cable when connecting.

Digital audio fiber-optic cable

Digital audio pin cable

Stereo audio pin cable

Stereo mini-plug cable

En 13

CONNECTIONS

Connecting external devices

Connecting a TV monitor

This unit is equipped with the following three types of output jack for connection to a TV.

HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input

signal format supported by your TV.

This unit will receive HDMI, component, or video signals in the same format as transmitted by the

output devices.

For example, these three output devices must be connected to the monitor by matching input/output

jacks and cables, and then you must change the TV’s input mode to the proper setting.

■

Connecting an HDMI video monitor

Connect the HDMI cable to the HDMI OUT jack.

■

Connecting a component video monitor

Connect the component video cable to the COMPONENT VIDEO (MONITOR OUT) jacks.

COMPONENT

VIDEO

MONITOR OUT

HDMI

OUT

MONITOR OUT

COMPONENT

IDEO

IDE

HDMI

(

D/DV

)

HDMI 2

DMI 3

HDMI 4

HDMI OUT jack

COMPONENT VIDEO jacks

(MONITOR OUT)

VIDEO jack

(MONITOR OUT)

COMPONENT

VIDEO

HDMI

VIDEO

COMPONENT

VIDEO

HDMI

VIDEO

Input Output

HDMI input

Component

video input

Video input

• Use a 19-pin HDMI cable with the HDMI logo.

• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.

HDMI

OUT

OMPONEN

IDE

PTICA

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIA

(

)

AXIAL

PTI

IDE

HDMI

(

D/DV

)

HDMI 2

HDMI

HDMI 4

NEN

IDE

NIT

OUT

NIT

OUT

AUDI

OUT

HDMI

HDMI input

COMPONENT

VIDEO

MONITOR OUT

COMPONENT

IDE

PTICA

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIA

(

)

AXIAL

PTI

IDE

HDMI

(

BD/DV

)

HDMI 2

DMI

HDMI 4

HDM

NIT

OUT

UDI

COMPONENT

VIDEO

Component video input

En 14

CONNECTIONS

Connecting external devices

■

Connecting a video monitor

Connect the video pin cable to the VIDEO (MONITOR OUT) jack.

■ Listening to TV audio

To transmit sound from the TV to this unit, connect its AV1-5 or AUDIO1-2 jacks to the TV’s

AUDIO OUT jacks.

If the TV supports optical digital audio output, we recommend that you connect the TV audio output

to the receiver’s AV4 jack. Connecting to AV4 allows you to switch the input source to AV4 with just

a single key operation using the SCENE function (☞

p. 26).

MONITOR OUT

COMPONENT

IDE

PTICA

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIA

(

)

AXIAL

PTI

IDE

HDMI

(

BD/DV

)

HDMI 2

DMI

HDMI 4

NEN

IDEO

NIT

OUT

HDM

UDI

VIDEO

Video input

OPTICAL

NEN

VIDE

PTICA

AV 1

AV 2

AV 3

AV 5

UDIO

AXIAL

(

)

AXIA

VIDE

HDMI 1

(

)

HDMI 2

HDMI

COMPONEN

IDE

NIT

HDMI

NIT

OPTICAL

Audio output

(Optical)

En 15

CONNECTIONS

Connecting external devices

Connecting BD/DVD players and other devices

This unit has the following input jacks. Connect them to the appropriate output jacks on

the external components.

■

Connecting BD/DVD players and other devices with

HDMI

Connect the device with an HDMI cable to one of the HDMI1-4 jacks.

Select the HDMI input (HDMI1-4) that the external device is connected to for

playback.

OPTION

HDMI

1234

ENTER

ECEIVER

ENE

RETURN

ENHAN

R. DE

TRAI

UDI

TRAN

MIT

LEE

V-A

TUNER

NIN

VIE

MUS

TERE

RADI

cInput selector

iCursor C / D / E

iENTER

lOPTION

Input jack Video input Audio input

HDMI1 HDMI HDMI

HDMI2 HDMI HDMI

HDMI3 HDMI HDMI

HDMI4 HDMI HDMI

AV1 Component video Optical

AV2 Component video Coaxial digital

AV3 Video Coaxial digital

AV4 Video Optical

AV5 Video Analog (Stereo)

AUDIO1 --- Analog (Stereo)

AUDIO2 --- Analog (Stereo)

VIDEO AUX Video Analog (Stereo)

(

BD/DVD

)

COMPONENT

VIDE

OPTICAL

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIAL

(

)

AXIAL

PTI

VIDE

NEN

VIDEO

NIT

DMI

NIT

UDIO

HDMI

HDMI output

BD/DVD player

■ Receiving audio from other input sources

This unit can use the AV1-5 or AUDIO1-2 input jacks to receive audio signals from

other audio input sources.

For example, if an external device cannot produce audio signals from an HDMI jack,

use the following method to change the audio input.

Use the cInput selector to select the desired HDMI input source.

Press lOPTION to display the Option menu. J1

Press iCursor C until “Audio In” is displayed, and then press

iENTER.

Press iCursor D / E to select the audio input source.

Once you have completed the setup, press lOPTION to close the

Option menu.

1 : See the section on “Configuring the settings specific for each input source (Option menu)” for details on

the Option menu (☞

p. 34).

OPTICAL

(

BD/DVD

)

NEN

VIDEO

(

)

AUDIO 1

AUDI O 2

AXIA

(

)

AXIAL

PTI

VIDEO

HDMI 2 HDMI

HDMI 4

NEN

IDE

MONITOR OUT

HDMI

OUT

NIT

OUT

UDI

HDMI

OPTICAL

HDMI

HDMI/Audio (Optical)

output

BD/DVD player

SL SR

Audio;;;;;;AV1

HDMI1

VOL .

If you have selected AV1 input audio (optical digital)

En 16

CONNECTIONS

Connecting external devices

■

Connecting BD/DVD players and other devices with component

cables

Connect the device with a component video cable to one of the AV1-2 input jacks.

Using optical digital audio output sources

Select the AV1 input that the external device is connected to for playback.

Using coaxial digital audio output sources

Select the AV2 input that the external device is connected to for playback.

COMPONENT

VIDEO

OPTICAL

AV 1

(

)

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIAL

(

)

AXIA

PTI

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

COMPONENT

VIDEO

OPTICAL

Component video / Audio (Optical)

output

BD/DVD player

AV 2

COAXIAL

OMPONEN

VIDE

OPTICAL

(

)

AV 1

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

(

)

AXIA

PTI

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

COMPONENT

VIDEO

COAXIAL

Component video / Audio (Coaxial)

output

BD/DVD player

■ Component connections to analog audio output devices

You can use the video input from the AV1-2 jacks in combination with the audio input from other

AV inputs or AUDIO1-2.

When connecting these devices, select the AV3-5 or the AUDIO1-2 jacks as the audio input for AV1

or AV2. See “Receiving audio from other input sources” (☞

p. 15) for detailed setup guidance.

Select the AV input source (AV1-2) that is connected by component video cable to the external

device for playback.

COMPONENT

VIDEO

PTI

(

)

AUDIO 1

AUDIO 2

AXIA

(

)

AXIAL

PTI

IDE

HDMI 1

(

BD/DV

)

HDMI

HDMI 4

NEN

IDE

NIT

OUT

HDMI

OUT

NIT

OUT

UDI

AUDIO

COMPONENT

VIDEO

Component video / Audio

output

Game console

SL SR

Audio;;;AUDIO1

AV1

VOL .

En 17

CONNECTIONS

Connecting external devices

■

Connecting BD/DVD players and other devices with video cables

Connect the external device with a video pin cable to one of the AV3-5 input jacks.

Using optical digital audio output sources

Select the AV4 input that the external device is connected to for playback.

Using coaxial digital audio output sources

Select the AV3 input that the external device is connected to for playback.

Using analog stereo audio output sources

Select the AV5 input that the external device is connected to for playback.

OPTICAL

OMPONEN

VIDE

OPTICAL

AV 1

AV 2

AV 3

AV 5

AUDI O 1

AUDI O 2

AXIAL

(

)

AXIA

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

VIDEO

OPTICAL

Video / Audio (Optical)

output

BD/DVD player

(

)

COAXIAL

VIDEO

OMPONEN

VIDE

OPTICAL

(

)

AV 1

AV 2

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIAL

PTI

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

VIDEO

COAXIAL

Video / Audio (Coaxial)

output

BD/DVD player

AV 5

OMPONEN

VIDE

OPTICAL

(

)

AV 1

AV 2

AV 3

AV 4

AUDIO 1

AUDI O 2

AXIAL

(

)

AXIA

PTI

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

AUDIO

VIDEO

Video / Audio

output

BD/DVD player

En 18

CONNECTIONS

Connecting external devices

■

Connecting CD players and other audio devices

Using analog stereo output sources

Select the audio input (AUDIO1-2) that the external device is connected to for playback.

Using optical digital output sources

Select the AV input (AV1 or AV4) that the external device is connected to for playback.

Using coaxial digital output sources

Select the AV input (AV2 or AV3) that the external device is connected to for playback.

AUDI O 1

AUDI O 2

OMPONEN

VIDE

OPTICAL

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AXIAL

(

)

AXIA

PTI

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

AUDIO

Audio output

CD player

OPTICAL

OMPONEN

VIDE

AV 2

AV 3

AV 5

AUDI O 1

AUDI O 2

AXIAL

(

)

AXIA

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

OPTICAL

CD player

Audio (Optical) output

We recommend connecting audio devices with an coaxial digital output to the AV3 coaxial digital

jack on this unit. This connection allows you to switch to the AV input 3 just by pressing the “CD”

SCENE key (☞

p. 26).

COAXIAL

(

)

COAXIAL

OMPONEN

VIDE

OPTICAL

(

)

AV 1

AV 4

AV 5

AUDIO 1

AUDI O 2

PTI

VIDE

HDMI

(

D/DVD

)

HDMI 2

HDMI

HDMI 4

NENT

VIDE

NIT

HDM

OUT

NIT

AUDI O

OUT

COAXIAL

Audio (Coaxial) output

CD player

En 19

CONNECTIONS

Connecting external devices

Connecting video cameras and portable audio players

Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, game consoles, or

portable audio devices to the receiver.

Select the V-AUX input to use these connected devices.

Transmitting input A/V to external devices

This receiver can transmit selected incoming analog audio/video signals to external devices through the

AV OUT and AUDIO OUT jacks. You can record these input audio and video signals to VCRs or

similar devices, or send them to other TVs or external devices.

Using the AV OUT jacks

Connect this jacks to the external device’s video input jack and analog audio input jacks.

Using the AUDIO OUT jacks

Connect this jack to the external device’s analog audio input jacks.

• Be sure to turn down the volume when connecting this unit and the other devices.

• When external components are connected to both the PORTABLE jack and the AUDIO jacks, the sound

output from the PORTABLE jack is transmitted.

VIDEO

AU X

STRAIGHT

RADIO

VIDEO

AUDIO

PORTABLE

AU D I O

VIDEO

AUDIO OUT

Audio output

Portable audio player Video cameras

Audio output

Video output

HDMI audio/video signals, component video signals, and digital audio signals cannot be transmitted

from these jacks.

OUT

AUDI O

OUT

NENT

VIDE

PTI

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AUDI O 1

AUDI O 2

AXIAL

(

)

AXIAL

PTI

VIDE

HDMI 1

(

)

HDMI

NEN

VIDE

MONITOR OUT

HDMI

NIT

AUDIO

VIDEO

AUDIO

Audio recorder

Audio input

VCR

Video / Audio

input

En 20

CONNECTIONS

An indoor FM antenna and an AM loop antenna are included with this receiver. Connect these antennas

properly to their respective jacks.

Connecting the FM/AM antennas

■ Improving FM reception

We recommend using an outdoor antenna. For more information, consult the nearest authorized

dealer.

■ Improving AM reception

Connect this unit to an outdoor antenna with a 5-10 m vinyl-coated wire. Make sure the AM loop

antenna is still connected.

Connecting the GND jack can reduce noise. Connect the jack to a store-bought ground bar or copper

plate with a vinyl-covered wire and bury this new attachment in moist ground.

The GND jack is not to be connected to the ground socket of an electrical outlet.

GND

ENTER

DMI

HDMI 4

MONITOR OUT

PEAKER

Indoor FM antenna

AM loop antenna

Position the AM antenna away from the receiver. The

wires of the AM antenna have no polarity.

You can connect either wire to the AM jack or the

GND jack.

Connecting the AM loop antenna

ReleaseInsertPress and hold

En 21

CONNECTIONS

This unit is equipped with a YPAO (Yamaha Parametric Room Acoustic Optimizer) that adjusts the status, size, and volume balance of the speakers in order to provide an optimal sound field. Using

YPAO allows you to automatically configure settings for which specialist knowledge is usually needed, such as adjusting speaker output and acoustic parameters to suit your listening room (the room

in which this unit is placed). J1

Check the following before using YPAO.

This unit

• The headphones are removed.

Subwoofer

• The power is turned on.

• Volume is set to approximately half, and the cross-over frequency (if

present) is set to maximum.

Place the supplied YPAO microphone at ear height in

your listening position.

Face the head of the YPAO microphone upwards.

Switch this unit on.

Connect the YPAO microphone to the YPAO MIC jack

on the front panel.

“MIC ON. YPAO START” appears on the front panel display, and

then changes to display the following. J2

Set up the speaker parameters automatically (YPAO)

When you use YPAO, a test tone will be output from the

speakers for approximately three minutes and acoustic

measuring will be performed. When using YPAO, be careful of

the following.

• The test tone is output at high volume. Please refrain from using

this function at night when it may be a nuisance to others nearby.

• Please take care that the test tone does not frighten any small

children.

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Subwoofer examples

When positioning the microphone, we recommend that you use

equipment that allows you to adjust the height (such as a tripod)

as a microphone stand. When using a tripod, use the tripod

screws to fix the microphone in place.

YPAO microphone

INFO

YPAO MIC

VOL.

SL SR

Press[SETUP]

YPAO

Continues to the

1 : When you have changed the number of speakers or the locations in which they

are installed, first use YPAO to adjust the speaker balance.

2 : To cancel measurement, disconnect the YPAO microphone.

En 22

CONNECTIONS

Set up the speaker parameters automatically (YPAO)

Press hSETUP to start measurement.

The following display appears if measurement finishes

without any problems.

Press iENTER to apply the results of

measurement.

Remove the YPAO microphone.

YPAO finishes automatically when the YPAO

microphone is removed.

SETUP

ENTER

ECEIVER

ENE

PTION

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

MIT

LEE

V-A

TUNER

NIN

VIE

MUS

TERE

RADI

hSETUP

iCursor C / D / E

iENTER

This completes preparations. To achieve more

accurate results, be careful of the following when

measuring.

• Measuring will take approximately three minutes.

Keep the room as quiet as possible during

measurement.

• Wait in the corner of the listening room during

measurement or leave it entirely, to avoid becoming an

obstruction between the speakers and the YPAO

microphone.

NOTE

When a problem occurs, an error message or report

appears either during or after measurement. Use the

following page as a reference to solve the problem,

and carry out YPAO again.

VOL.

SL SR

Progress00%

YPAO

Display during measurement

VOL.

SL SR

YPAOComplete

YPAO

You can use the following method to cancel

measurement results if you want to redo the

measuring. Press iCursor C to switch to the

following display, the use iCursor D / E to select

“Cancel” and press iENTER. After this operation,

use the same procedure to carry out YPAO again.

The YPAO microphone is sensitive to heat. When you

have finished measuring, store the microphone out of

direct sunlight, and away from locations that may

experience high temperatures, such as on top of AV

equipment.

SL SR

Disconnect MIC

YPAO

VOL.

SL SR

Set>Cancel

YPAO

VOL.

En 23

CONNECTIONS

Set up the speaker parameters automatically (YPAO)

■

When an error message appears

during measurement

Check the content of the message from the list of

messages (☞

p. 24) to resolve the problem, and carry out

the measurement process again.

Check the error code that appears in the display, and

carry out YPAO again by performing the following steps.

When “E-1” or “E-2” is displayed:

Press iENTER once, and then press

iCursor E to select “Exit.”

Press iENTER to finish YPAO, and set the

unit to standby mode.

Check that the speakers are properly

connected.

Turn on the unit, and then carry out YPAO

again.

When “E-5” to “E-9” is displayed:

Check that the environment is suitable for

accurate measurement.

Press iENTER to switch the display.

Check that “Retry” is selected, and then

press iENTER to carry out YPAO again.

When “E-10” is displayed:

Press iENTER once, and then press

iCursor E to select “Exit.”

Press iENTER to finish YPAO.

Switch the unit to standby mode.

Turn on the unit again, and then carry out

YPAO.

■

When a warning message appears

after measurement

Check the content of the message from the list of

messages (☞

p. 24) to resolve the problem. You can

confirm the speaker that has the problem when that

speaker’s indicator lights up.

When multiple warning messages appear:

Use iCursor D / E to display other warning messages.

When applying the results of measurement:

Press iENTER to switch display, the use iCursor D

/ E to select “Set” and press iENTER.

When cancelling YPAO:

Press iENTER to switch display, the use iCursor D

/ E to select “Cancel” and press iENTER.

ENTER

ECEIVER

ENE

PTION

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

MIT

LEE

V-A

TUNER

NIN

VIE

MUS

TERE

RADI

iCursor D / E

iENTER

E-9:CANCEL

YPAO

VOL.

Error message (example)

NOTE

Although you can apply the results of measurement

when a warning message appears, doing so will not

provide optimal sound. We recommend you resolve

the problem and then carry out YPAO again.

SL SR

W-3:LEVEL

YPAO

VOL.

Warning message (example) Speaker that has a

problem.

En 24

CONNECTIONS

Set up the speaker parameters automatically (YPAO)

■

Message list

■ When a warning message appears before

measurement

■ Error message

■ Warning message

NOTE

If the following messages appear, resolve the problems that have

occurred and carry out the measurement process again.

Connect MIC! The YPAO microphone is

not connected.

Connect the YPAO

microphone to the YPAO

MIC jack on the front

panel.

Unplug HP! The headphones are

connected.

Remove the headphones.

Memory Guard! The settings of this unit

are protected.

Set “Memory Guard” in

the Setup menu to “Off.”

E-1:FRONT SP The unit was not able to

find the front channel.

Check that the left and

right front speakers are

connected correctly.

E-2:SUR. SP The unit was only able to

find one of side of the

surround channels.

Check that the left and

right front surround

speakers are connected

correctly.

E-5:NOISY The noise is too loud,

preventing accurate

measurements from

being taken.

Measure again in quiet

surroundings. Turn off any

devices in the room that

may be emitting noise, or

place them further away

from the YPAO

microphone.

When this message is

displayed, selecting

“Proceed” will allow you

to continue measuring.

However, we recommend

resolving the problem and

measuring again, as

continuing measurement

without doing so will not

give accurate results.

E-7:NO MIC The YPAO microphone

has been removed.

While measuring, take

care not to touch the

YPAO microphone.

E-8:NO SIGNAL The YPAO microphone

could not distinguish a

test tone.

Check that the YPAO

microphone has been

installed correctly.

Check that each speaker

has been connected and

installed correctly.

The YPAO microphone

or the YPAO MIC jack

may be broken. Inquire at

the retailer where you

purchased this unit, or the

nearest Yamaha service

center.

E-9:CANCEL You have carried out an

operation that has

cancelled the measuring

process.

Carry out the measuring

process again. Do not

operate this unit by, for

example, adjusting the

volume.

E-10:INTERNAL An internal error has

occurred.

Carry out the measuring

process again. Contact a

Yamaha service center if

“E-10” appears again.

W-1:PHASE The speakers displayed

are connected with the

opposite polarity.

Depending on the type of

speakers you are using

and the environment in

which you have them

installed, this message

may occur even if the

speakers are connected

correctly.

Depending on the type of

speakers, “W-1” may

display even if the

speakers are connected

correctly.

Check that the speaker

polarity + (plus), and -

(minus) are correct. If

these are connected

correctly, you can use the

speakers normally even

this message appears.

W-2:OVER 24m

(80ft)

The speakers displayed

are separated from the

listening position by

more than 24m, and

cannot be adjusted

correctly.

Install the speakers with

24m of the listening

point.

W-3:LEVEL The difference each

channel is too loud or too

low, and cannot be

adjusted correctly.

Check that all speakers

are installed in the same

surroundings.

Check that the speaker

polarity + (plus), and -

(minus) are correct.

We recommend the same

speakers or speakers with

as similar specifications

as possible.

Adjust the volume of the

subwoofer.

If “W-2” or “W-3” appears, you can apply measurement results,

but they will not give optimal results. We recommend that you

resolve the problem and carry out the measurement process

again.

En 25

PLAYBACK

Turn on external components (TV, DVD

player, etc.) connected to this unit.

Turn on this unit and select the input source

using cInput selector.

The name of the selected input source is displayed for

a few seconds. J1

Play the external component that you have

selected as the source input, or select a

radio station on the tuner.

Refer to the instruction manuals provided with the

external component for details on playback.

For details on how to tune in to FM/AM stations, refer

to “FM/AM tuning” (☞

p. 30).

Press mVOLUME +/- to adjust the volume.

To mute the output.

Press nMUTE to mute the audio output.

Press nMUTE again to unmute.

Adjusting high/low-frequency sound

(Tone control)

You can adjust the balance of the high-frequency range

(Treble) and low-frequency range (Bass) of sounds

output from the front left and right speakers to obtain

desired tone.

Press TONE CONTROL on the front panel

repeatedly to select “Treble” or “Bass.”

The current setting is displayed on the front panel

display.

Press PROGRAM l / h to adjust the output

level in those frequency ranges.

The display returns to the previous display soon after

you release the key.

Basic playback procedure

VOLUME

HDMI

AUDIO

1234

125

V-AUX

TUNER

MUTE

ECEIVER

ENE

PTION

RETURN

ENHAN

R. DE

TRAI

TRAN

MIT

LEE

NIN

VIE

MUS

TERE

RADI

ENTE

cInput selector

mVOLUME +/-

nMUTE

The tone control of the speakers or headphones can be

set separately. Set the headphone tone control with the

headphones connected.

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFO

MEMORY

PRESET

FM AM

TONE CONTROL

PROGRAM l / h

YPAO MIC

SL SR

Treble 0.0dB

TONE

VOL.

Adjustable range -10.0 dB to +10.0 dB

Adjustment

increments

2.0 dB

If you set the balance extremely off, sounds may not

match those from other channels well.

1 : You can change the input source name displayed on the front

panel display as necessary (☞

p. 42).

En 26

PLAYBACK

This unit has a SCENE function that allows you to turn the power on and change input sources and sound field programs with one key.

Four scenes are available for different uses, such as

playing movies or music. The following input sources

and sound field programs are provided as the initial

factory settings.

Registering input sources/sound

field program

Use cInput selector to select the input

source you want to register.

Use the fSound selection keys to select

the sound field program you want to

Press the gSCENE key until “SET

Complete” appears on the front panel

display.

This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel playback for almost any sound source using various

sound field programs stored on the chip, and a range of sound decoders.

Selecting sound field programs and

sound decoders

This unit offers sound field settings (sound field

programs) in many different categories suitable for

movies, music and other uses. Choose a sound field

program that sounds best with the source you are playing

back, rather than relying on the name or explanation of

the program.

Selects sound field program:

MOVIE category: Press fMOVIE repeatedly

MUSIC category: Press fMUSIC repeatedly

Selects stereo reproduction:

Press fSTEREO repeatedly

Selects compressed music enhancer:

Press fSTEREO repeatedly

Selects surround decoder:

Press fSUR. DECODE repeatedly

Switches Straight decoding mode (☞p. 27):

Press fSTRAIGHT

Changing input settings with a single key (SCENE function)

cInput selector

fSound selection keys

fMOVIE

fMUSIC

fSTEREO

fSUR. DECODE

fSTRAIGHT

gSCENE

SCENE

ENHANCER

SUR. DECODE

STRAIGHT

HDMI

AUDIO

1234

125

V-AUX

TUNER

MOVIE MUSIC

STEREO

DVD

RADIO

ECEIVER

PTION

RETURN

TRAN

MIT

LEE

NIN

ENTE

SCENE Input Sound field program

BD/DVD HDMI1 Straight

TV AV4 Straight

CD AV3 Straight

RADIO TUNER 5ch Enhancer

SL SR

SET Complete

SCENE1

VOL .

Release the key when “SET Complete” is displayed.

Enjoying sound field programs

• Sound field programs are stored for each input source.

When you change the input source, the sound field

program previously selected for that input source is

applied again.

• If the sampling frequency of an input source is higher

than 96 kHz, this unit does not apply any sound field

programs.

• You can use the speaker indicators on the front panel

display to check what speakers are currently

outputting sound (☞

p. 7).

• You can adjust sound field elements (sound field

parameters) for each of the programs.

SL SR

Sci-Fi

MOVIE

VOL.

Sound field program categories

Program

En 27

PLAYBACK

Enjoying sound field programs

■

Enjoying unprocessed playback

(Straight decoding mode)

Use straight decoding mode when you want to playback

sound without sound field processing. You can playback

as follows in straight decoding mode.

2-channel sources such as CD

Stereo sound plays through the front left and right

speakers.

Multi-channel playback sources such as BD/

DVD

Plays back audio from a playback source without

applying sound field effects, using an appropriate

decoder to split the signal into multiple channels.

Press fSTRAIGHT to activate the straight

decoding mode.

Press fSTRAIGHT again to exit straight

decoding mode.

■

Enjoying stereo playback

Select “2ch Stereo” from the surround field programs

when you want to playback 2-channel stereo sound

(from the front speakers only), regardless of the

playback source.

Selecting “2ch Stereo” will playback as follows for the

playback of CD and BD/DVD sources.

2-channel sources such as CD

Stereo sound plays back through the front speakers.

Multi-channel sources such as BD/DVD

Playback channels other than the front channels in the

playback source are mixed with the front channels and

played back through the front speakers.

Press fSTEREO repeatedly to select “2ch

Stereo.”

To deactivate stereo playback, press any of

the fSound selection keys to select a

sound field program other than “2ch

Stereo.”

■

Enjoying sound field programs

without surround sound speakers

This unit allows you to use virtual surround speakers to

enjoy sound field surround effects, even without any

surround speakers (Virtual CINEMA DSP mode). You

can even enjoy surround sound presence with just a

minimal configuration of the front speakers only.

This unit will switch to Virtual CINEMA DSP mode

automatically when surround speakers are

unavailable. J1

■

Enjoying sound field programs

with headphones

Even when headphones are connected, you can enjoy the

reproduction sound field presence with ease (SILENT

CINEMA mode). J2

Sound selection keys

fSTRAIGHT

fSTEREO

ENHANCER

SUR. DECODE

STRAIGHT

MOVIE MUSIC

STEREO

ECEIVER

ENE

PTION

RETURN

DMI

UDI

TRAN

MIT

LEE

V-A

TUNER

NIN

RADI

ENTE

SL SR

Straight

VOL.

SL SR

Sci-Fi

MOVIE

VOL.

Previously selected program

2ch Stereo

STEREO

VOL.

SL SR

Hall in Vienna

MUSIC

VOL.

1 : However, Virtual CINEMA DSP mode is not available in the

following conditions:

• When headphones are connected to this unit.

• When a “2ch Stereo” sound field program is selected.

• When straight decoding mode is selected.

2 : However, SILENT CINEMA mode is not available in the

following conditions:

• When a “2ch Stereo” sound field program is selected.

• When straight decoding mode is selected.

En 28

PLAYBACK

Enjoying sound field programs

Sound field programs

■

Category: MOVIE

Sound field programs optimized for viewing video sources such as movies, TV programs, and games.

■

Category: MUSIC

This sound field is suitable when listening to music sources such as CDs.

in the table indicates the sound field program for CINEMA DSP.

Standard This program creates a sound field emphasizing the surround feeling without disturbing the

original acoustic positioning of multi-channel audio such as Dolby Digital and DTS. It has

been designed with the concept of an ideal movie theater, in which the audience is

surrounded by beautiful reverberations from the left, right and rear.

Spectacle This program represents the spectacular feeling of large-scale movie productions. It

reproduces a broad theater sound field that matches cinemascope and wider-screen movies

with an excellent dynamic range providing everything from very small sound effects to

large, impressive sounds.

Sci-Fi This program clearly reproduces the finely elaborated sound design of the latest science

fiction and special effects-featuring movies. You can enjoy a variety of cinematographically

created virtual spaces reproduced with clear separation between dialog, sound effects and

background music.

Adventure This program is ideal for precisely reproducing the sound design of action and adventure

movies. The sound field restrains reverberations but puts emphasis on reproducing a

powerful space expanded widely to the left and right. The reproduced depth is also

restrained relatively to ensure the separation between audio channels and the clarity of the

sound.

Drama This sound field features stable reverberations that match a wide range of movie genres from

serious dramas to musicals and comedies. The reverberations are modest but offer an

optimum 3D feeling, reproducing effects tones and background music softly but cubically

around clear words and center positioning in a way that does not fatigue the listener even

after long hours of viewing.

Mono Movie This program is provided for reproducing monaural video sources such as a classic movie in

an atmosphere of a good old movie theater. The program produces the optimum expansion

and reverberation to the original audio to create a comfortable space with a certain sound

depth.

Sports This program allows the listeners to enjoy stereo sport broadcasts and studio variety

programs with enriched live feeling. In sports broadcasts, the voices of the commentator and

sportscaster are positioned clearly at the center while the atmosphere of the stadium expands

in an optimal space to offer the listeners a feeling of presence in the stadium.

Action Game This sound field is suitable for action games such as car racing and FPS games. It uses

reflection data that limits the effects range per channel in order to offer a powerful playing

environment that makes the listener feel as if they are right there by enhancing various

effects tones while maintaining a clear sense of directions.

Roleplaying Game This sound field is suitable for role-playing and adventure games. It combines the sound

field effects for movies and the sound field designs for “Action Game” to represent the depth

and 3D feeling of the field during play, while offering movie-like surround effects in the

movie scenes in the game.

Hall in Munich This sound field simulates a concert hall with approximately 2500 seats in Munich, using

stylish wood for the interior finishing as normal standards for European concert halls. Fine,

beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual

seat is at the center left of the arena.

Hall in Vienna This is an approximately 1700-seat, middle-sized concert hall with a shoebox shape that is

traditional in Vienna. Pillars and ornate carvings create extremely complex reflections from

all around the audience, producing a very full, rich sound.

Chamber This program creates a relatively wide space with a high ceiling like an audience hall in a

palace. It offers pleasant reverberations that are suitable for courtly music and chamber

music.

Cellar Club This program simulates a live house with a low ceiling and homey atmosphere. A realistic,

live sound field features powerful sound as if the listener is in a row in front of a small stage.

The Roxy Theatre This is the sound field of a rock music live house in Los Angeles, with approximately 460

seats. The listener’s virtual seat is at the center left of the hall.

The Bottom Line This is the sound field at stage front in The Bottom Line, a famous New York jazz club once.

The floor can seat 300 people to the left and right in a sound field offering real and vibrant

sound.

Music Video This sound field offers an image of a concert hall for live performance of pop, rock and jazz

music. The listener can indulge oneself in a hot live space thanks to the presence sound field

that emphasizes the vividness of vocals and solo play and the beat of rhythm instruments,

and to the surround sound field that reproduces the space of a big live hall.

En 29

PLAYBACK

Enjoying sound field programs

■

Category: STEREO

Suitable for listening to stereo sources.

■

Category: ENHNCR (Compressed music enhancer)

Suitable for listening to compressed audio, such as MP3.

■

Category: SUR.DEC (Surround decode mode)

Select this program to playback sources with selected decoders. You can playback 2-channel sources as

5.1-channel sound.

2ch Stereo Use this program to mix down multi-channel sources to 2 channels. When multi-channel

signals are input, they are down mixed to 2 channels and output from the front left and right

speakers.

5ch Stereo Use this program to output sound from all speakers. When you play back multi-channel

sources, this unit down-mixes the source to 2 channels, and then outputs the sound from all

speakers. This program creates a larger sound field and is ideal for background music at

parties, etc.

Straight Enhancer Use this program to restore the original depth and dynamics of 2-channel or multi-channel

to compression audio.

5ch Enhancer Use this program to play back compression artifacts in 5-channel stereo.

q Pro Logic A Dolby Pro Logic decoder. Suitable for any source.

q PLII Movie A Dolby Pro Logic II decoder. Suitable for viewing any movie.

q PLII Music A Dolby Pro Logic II decoder. Suitable for listening to music.

q PLII Game A Dolby Pro Logic II decoder. Suitable for playing games.

En 30

PLAYBACK

The FM/AM tuner of this unit provides the following

two modes for tuning.

Normal tuning

You can tune in to a desired FM/AM station by searching

or specifying its frequency.

Preset tuning (☞p. 31)

You can preset the frequencies of FM/AM stations by

registering them to specific numbers, and later just select

those numbers to tune in.

Selecting a frequency for reception

(Normal tuning)

Press cTUNER to switch to the tuner input.

Press dFM or dAM to select a band to

receive.

Use dTUNING H / I to set a frequency to

receive.

dTUNING H

Increases the frequency. Press and hold this key for

longer than a second to search automatically for a station

on a higher frequency than the current one. J1

TUNING I

Decreases the frequency. Press and hold this key for

longer than a second to search automatically for a station

on a lower frequency than the current one. J1

FM/AM tuning

cTUNER

dFM

dAM

dTUNING H / I

iCursor B / C / D / E

iENTER

lOPTION

OPTION

TUNER

FM AM

TUNING

ENTER

ECEIVER

ENE

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

MIT

LEE

V-A

VIE

MUS

TERE

RADI

When using the FM/AM tuner, adjust the direction of

the FM/AM antenna connected to this unit to get the

best reception.

SL SR

FM87.50MHz

VOL.

STEREO

TUNED

SL SR

FM98.50MHz

VOL.

Lights up when receiving

a broadcast from a station

Lights up when receiving

a stereo broadcast

■ When signal reception is poor

When you are receiving an FM broadcast and cannot

obtain a stable stereo broadcast, you can force this

unit to receive in a monaural mode.

Press cTUNER to switch to the tuner

input.

Press lOPTION to display the Option

menu. J2

Use iCursor B / C to select “FM Mode.”

Press iENTER and use the iCursor D /

E to select “Mono.”

When setting is completed, press

lOPTION to close the Option menu.

To return this unit to its original settings, use the

same procedure to return the settings to “Stereo.”

FMMode

OPTION

VOL .

FMMode:Mono

9850

VOL.

1 : When searching for a station, release the key once the search has

started.

2 : See the section on “Configuring the settings specific for each

input source (Option menu)” for details on the Option menu

(☞

p. 34).

En 31

PLAYBACK

FM/AM tuning

Registering and recalling a

frequency (Preset tuning)

You can register up to 40 FM/AM stations as preset

stations. There are two methods of presetting stations,

“Auto Preset” and “Manual Preset.” Use one of these

methods to register stations.

■

Presetting FM stations

automatically (Auto Preset)

The tuner detects FM stations with strong signals and

registers up to 40 automatically.

Press cTUNER to switch to the tuner input.

Press lOPTION to display the Option

menu. J1

Use iCursor B / C to select “Auto Preset.”

Press iENTER, then press dPRESET F /

G or iCursor B / C to choose the present

number from which to start the Auto Preset

function.

Auto Preset will begin approximately 5 seconds after

you select a preset number.

If you do not select a preset number, Auto Preset will

begin approximately 5 seconds after “READY” is

displayed.

The Option menu closes automatically when presetting

is complete. J2

■

Registering stations manually

(Manual Preset)

Select stations by hand and register them as presets

individually.

Tune in to the station you wish to register,

referring to “Selecting a frequency for

reception (Normal tuning)” (☞

p. 30).

Use one of the following methods to

receiving.

■ Registering to a preset number to which no

station is registered

Press dMEMORY for 2 seconds or longer.

The station will be registered automatically to the lowest

open preset number (or the next number after the one

registered most recently).

TUNER

dMEMORY

dPRESET F / G

iCursor B / C

iENTER

iRETURN

lOPTION

OPTION

RETURN

TUNER

MEMORY

PRESET

ENTER

ECEIVER

ENE

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

MIT

LEE

V-A

NIN

VIE

MUS

TERE

RADI

AM stations cannot be automatically registered. Use

manual station preset.

SL SR

Auto Preset

OPTION

VOL.

To cancel registration, press iRETURN.

SL SR

01:FM87.50MHz

READY

VOL.

Selecting a preset number

Status Frequency

Preset number

SEARCH MEMORY

During Auto Preset

Preset for stations

SL SR

Auto Preset

FINISH

VOL.

When Auto Preset is complete

STEREO

TUNED

SL SR

01:FM98.50MHz

MEMORY

VOL.

Registered frequencies

1 : See the section on “Configuring the settings specific for each

input source (Option menu)” for details on the Option menu

(☞

p. 34).

2 : The preset with the lowest preset number will be selected

automatically immediately after presetting.

En 32

PLAYBACK

FM/AM tuning

■ Designating a preset number for

registration

Press dMEMORY once, to display “Manual Preset” on

the front panel display. After a small wait, the preset

number that the station has been registered to will

appear.

Press dPRESET F / G to select the preset to register

the station to, and then press dMEMORY to register.

■

Recalling a preset station

You can call preset stations registered by automatic

station preset or manual station preset. J1

■ To select a registered station

Press dPRESET F / G to select the preset

number of the station.

Clearing preset stations

Press cTUNER to switch to the tuner input.

Press lOPTION to display the Option

menu. J2

Use iCursor B / C to display “Clear

Preset” and press iENTER.

Use iCursor B / C to select the preset

number you want to clear, and press

iENTER to clear it.

Press lOPTION to finish this operation.

Radio Data System tuning

Radio Data System is a data transmission system used by

FM stations in many countries. This unit can receive

various Radio Data System data such as “Program

Service,” “Program Type,” “Radio Text,” “Clock Time”

when receiving Radio Data System broadcasting

stations.

■

Displaying the Radio Data System

information

You can display the 4 types of the Radio Data System

information: “Program Service,” “Program Type,”

“Radio Text,” “Clock Time.”

Tune into the desired Radio Data System

broadcasting station.

cTUNER

dMEMORY

dPRESET F / G

iCursor B / C

iENTER

iRETURN

lOPTION

OPTION

RETURN

TUNER

MEMORY

PRESET

ENTER

ECEIVER

ENE

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

MIT

LEE

V-A

NIN

VIE

MUS

TERE

RADI

To cancel registration, press iRETURN or do not

operate the remote control for about 30 seconds.

SL SR

01:Empty

9850

VOL.

Preset number

The newly registered frequency

Empty, or the frequency registered

most previously.

Blinks

Press iRETURN to cancel the operation.

Repeat this operation to clear the registration of

multiple numbers.

SL SR

01:FM98.50MHz

CLEAR

VOL.

The number of the preset to be cleared

Blinks Registered frequencies

The Radio Data System reception feature is only

available in U.K. and Europe models.

We recommend that you use the automatic preset

tuning to tune into the Radio Data System

broadcasting stations (☞

p. 31).

Continues to the

1 : Preset numbers to which no stations are registered will be

skipped. “No Presets” or “No Presets in Memory” is displayed

when there are no stations are registered.

2 : See the section on “Configuring the settings specific for each

input source (Option menu)” for details on the Option menu

(☞

p. 34).

En 33

PLAYBACK

FM/AM tuning

Press eINFO repeatedly until the desired

information is displayed.

Information on the display changes as you press the

key. The kind of information is displayed for a while

and then the information is displayed. J1

Contents of information are as follows.

Front panel display (When “Program Type”

selected)

■

Automatic traffic information

reception

When the tuner is active, this unit can automatically

search for and receive transmissions from traffic

information broadcast stations. To enable this function:

Press cTUNER to switch to the tuner input.

Press lOPTION to display the Option

menu. J2

Use iCursor B / C to select

“TrafficProgram.”

Press iENTER to enable the search

function.

When a traffic station is found, it will appear on the

display and the Option menu will close.

OPTION

RETURN

TUNER

INFO

ENTER

ECEIVER

ENE

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

MIT

LEE

V-A

NIN

VIE

MUS

TERE

RADI

cTUNER

eINFO

iCursor B / C

iENTER

iRETURN

lOPTION

Type of information Description

Program Service Displays the name of the Radio Data

System program service currently

being received.

Program Type Displays the type of the Radio Data

System program currently being

received.

Radio Text Displays the information on the

Radio Data System program

currently being received.

Clock Time Displays the current time.

DSP Program Displays the currently selected

sound field program.

Audio Decoder Displays the currently selected

surround decoder.

ProgramService ProgramType RadioText

ClockTime

DSPProgramAudioDecoder

(Frequency display)

“Program Service,” “Program Type,” “Radio Text”

and “Clock Type” do not appear when the radio

station does not provide the Radio Data System

service.

STEREO

TUNED

SL SR

CLASSICS

10800

VOL.

Frequency

Program Type

SL SR

VolumeTrim

OPTION

VOL .

SL SR

TrafficProgram

OPTION

VOL .

• The transmission search will begin in approximately

5 seconds. Or, when the status indicator reads

“READY,” you can begin the search immediately by

pressing

iENTER.

• By pressing

iRETURN right before or during a

search, it will return to the Option menu.

• When the status is “READY,” use

iCursor B / C to

start a search in the specified direction.

iCursor B: Searches upward from the current

frequency.

iCursor C: Searches downward from the current

frequency.

If the receiver cannot find a traffic station, “TP Not

Found” will appear on the display, and the Option

menu will shortly close.

SL SR

TrafficProgram

READY

VOL .

Status

STEREO

TUNED

SL SR

TPFM101.30MHz

FINISH

VOL.

Traffic info broadcast station (Frequency)

1 : “PTY Wait,” “RT Wait,” or “CT Wait” may appear when Program

Type, Radio Text, or Clock Time is displayed. That shows this

unit is receiving data (or stopping receiving data). If the data is

receivable, the corresponding information is displayed after a

while.

2 : See the Setting the Option menu for Each Input Source section

(☞

p. 34) for more information on the Option menu.

En 34

SETUP

This receiver has a unique option menu specific for each type of input source, such as volume trim for compatible input sources, audio/video data display for signals from

external devices, and other frequently used menu items.

Option menu display and setup

Use the cInput selector on the remote

control to select the Option menu you wish

to display.

Press lOPTION.

The Option menu appears for the desired input source.

Select the desired control/setup item using

iCursor B / C and press iENTER.

The displayed Option menu items differ depending on

the input source.

For details, read the following Option menu items

section.

Select the desired menu item (or enable a

function) using iCursor B / C / D / E and

iENTER.

Parameters of the selected item are displayed. The

parameters you can set differ depending on the menu

items.

To close the Option menu, press lOPTION.

Option menu items

The following menu items are provided for each input

source.

■

Adjusting volume between input

sources

Input source: All

Reduces any change in volume when switching between

input sources by correcting volume differences in each

input source. You can adjust this parameter for each

input source.

Configuring the settings specific for each input source (Option menu)

cInput selector

iCursor B / C / D / E

iENTER

iRETURN

lOPTION

OPTION

RETURN

HDMI

AUDIO

1234

125

V-AUX

TUNER

ENTER

ECEIVER

ENE

ENHAN

R. DE

TRAI

TRAN

MIT

LEE

NIN

VIE

MUS

TERE

RADI

• You can also use iRETURN to return to the previous

screen or close the Option menu.

• Certain selected menu items may automatically close

the Option menu when their functions are enabled.

SL SR

VolumeTrim

OPTION

VOL .

Option menu

For a few seconds after closing the Option menu, the

remote control keys may not function. If this occurs,

reselect the input source.

HDMI1-4 Volume Trim Audio In Signal Info

AV1-2 Volume Trim Audio In Signal Info

AV3-4 Volume Trim Signal Info

AV5 Volume Trim

AUDIO1-2 Volume Trim

V-AUX Volume Trim

TUNER Volume Trim FM Mode Auto Preset

Clear Preset TrafficProgram

Volume Trim

Adjustable range -6.0 dB to 0.0 dB to +6.0 dB

Default setting 0.0 dB

Adjustment

increments

0.5 dB steps

En 35

SETUP

Configuring the settings specific for each input source (Option menu)

■

Combining HDMI/AV1-2 input source

video and audio

Input source: HDMI1-4, AV1-2

Combines video from HDMI or AV input sources with analog/

digital audio inputs in situations such as:

– an external device is connected with an HDMI cable but cannot

transmit audio through HDMI

– an external device with component video output and analog audio

output (such as certain game consoles) are connected to the

system

To change assignments, select an input source (HDMI1-4 or AV1-2)

as the video input first, and then select audio input jacks in this

menu.

Set as follows according on the desired combination of audio input

jacks.

■

Displaying information on audio/video

signals

Input source: HDMI1-4, AV1-4

Displays information on digital audio and video signals on the

front panel display. You can display the signal information by

pressing iENTER on the menu item and using iCursor B / C.

Audio information

Video information

■

Changing FM mode (Stereo/Monaural)

Input source: TUNER

Sets this unit to automatically match FM broadcast frequencies in

stereo, or to convert the frequency to monaural (☞

p. 30).

■

Automatically presetting FM radio

stations

Input source: TUNER

Automatically detects radio stations in the FM frequency and

registers them as preset stations (☞

p. 31).

■

Clearing preset FM stations

Input source: TUNER

Clears the preset stations (☞p. 32).

■

Searching for traffic information

Input source: TUNER

Automatically searches for traffic information with the Radio Data

System (☞

p. 32).

Audio In

Audio inputs Settings method

Optical digital audio

input

Select AV1 or AV4. Connect the external component

audio cable to the optical jack for the selected input.

Coaxial digital audio

input

Select AV2 or AV3. Connect the external component

audio cable to the coaxial jack for the selected input.

Analog audio input Select one of AV5, AUDIO1, or AUDIO2. Connect

the external component audio cable to the audio jack

for the selected input.

• For details of settings, refer to “Receiving audio from other input

sources” (☞

p. 15) and “Component connections to analog audio

output devices” (☞

p. 16).

• To return audio inputs to their previous settings, display this item

again, and select the original input jack.

SL SR

Audio;;;;;;AV1

HDMI1

VOL.

Assignable audio input jacks

Inputs that change the audio source

Signal Info

FORMAT Format of audio signals.

CHAN The number of input signal channels (front/surround/

LFE).

For example, if input signal channels are 3 front

channels, 2 surrounds and LFE, “3/2/0.1” is

displayed.

SAMPL The sampling frequency of analog-to-digital

conversion.

B RATE The bit rate of input signal per second.

V IN Format and resolution of video input signal.

V OUT Format and resolution of video output signal.

V.MSG

(appears only

when an error

has occurred)

Error messages about HDMI signals and components.

Error message

HDCP Error HDCP authentication failed.

Device Over The number of connected HDMI

components is over the limit.

SL SR

DolbyD

FORMAT

VOL .

Menu item

Information

• “No Signal” is displayed when no signals are being received,

and “---” is displayed if this unit cannot recognize the incoming

signal.

• The bit rate may vary during playback.

FM Mode

Auto Preset

Clear Preset

TrafficProgram

En 36

SETUP

You can configure various function settings of this unit using the Setup menu.

Setup menu display and settings

Press hSETUP on the remote control.

Use the iCursor B / C to select the desired

menu and press iENTER.

Setup menu categories

Ex: Sound Setup menu

Use iCursor B / C to navigate the

submenus to find the desired setting and

press iENTER.

When multiple items appear, use iCursor

B / C to select the desired item.

Press iCursor D / E to change the setting.

You can change other items by repeating step 4 and 5.

Press hSETUP to exit the Setup menu.

Setup menu items

Setup menu

Setting various functions (Setup menu)

hSETUP

iCursor B / C / D / E

iENTER

iRETURN

SETUP

RETURN

ENTER

ECEIVER

ENE

PTION

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

MIT

LEE

V-A

TUNER

NIN

VIE

MUS

TERE

RADI

Speaker Setup Manages settings for speakers.

Sound Setup Manages settings for audio output.

Func. Setup Manages settings to make receiver

operation easier, such as input source

labeling and auto-standby functions.

DSP Parameter Sets parameters for sound field programs.

Memory Guard Protects settings against accidental

alteration.

SL SR

SpeakerSetup

SETUP

VOL .

SL SR

Lipsync

SOUND

VOL.

You can also use iRETURN to return to the

previous screen.

For a few seconds after closing the Setup menu, the

remote control keys may not function. If this occurs,

reselect the input source.

SL SR

Audio;;;;;;Amp

HDMI

VOL.

Speaker Setup

Config Subwoofer

Front

Center

Sur. LR

Crossover

SWFR Phase

Extra Bass

Level

Distance

Equalizer

Test Tone

Sound Setup

Lipsync HDMI Auto

Auto

Manual

Adaptive DRC

D.Range

Max Volume

Init.Volume

HDMI Audio Out

Func. Setup

Input Rename

AutoPowerDown

Dimmer

DSP Parameter

Memory Guard

(speakers)

(unit and speakers)

(speakers and frequency

bands)

En 37

SETUP

Setting various functions (Setup menu)

Manages settings for speakers

Speaker Setup submenu

■

Manual speaker setup

Adjusts the output characteristics of the speakers based on

manually set parameters.

Subwoofer

Confirms the subwoofer.

Front

Selects the size (sound reproduction capacity) of the front

speakers. J2

Center

Selects the size of the center speakers.

Sur. LR

Selects the size of the surround speakers.

Config Manually manages speaker configuration, such as

speaker size (sound production capacity), and bass

audio processing.

Level Manually adjusts the volume of each speaker.

Distance Manually adjusts the output of each speaker based on

distance to the listening point.

Equalizer Selects an equalizer to adjust speaker output

characteristics.

Test Tone Generates test tones.

SL SR

SpeakerSetup

SETUP

VOL .

Config

In the Config submenu, you can select the speaker size

characteristic (Large or Small). Select the size (sound

reproduction capacity) that matches your speakers.

When speaker size is set to “Small,” low-frequency components

of the speakers that you configured are produced from the

subwoofer (or from the front speakers if there is no subwoofer).

Yes (Default) Select this when you have a subwoofer connected.

During playback, the subwoofer will produce audio

from the LFE (low-frequency effect) channel and bass

audio from other channels. J1

None Select this when you do not have a subwoofer

connected. The front speakers will produce audio

from the LFE (low-frequency effect) channel and bass

frequency audio from other channels.

Woofer diameter

• 16 cm or larger → Large

• 16 cm or smaller → Small

Small (Default) Select this for small speakers. The subwoofer will

produce front channel low-frequency

components. J3

Large Select this for large speakers. The front speakers will

produce all of the front channel frequency

components.

None Select this when there is no center speaker. The front

speakers will produce center channel audio.

Small (Default) Select this when a small center speaker is connected.

Large Select this when a large center speaker is connected.

None Select this when no surround speakers are connected.

The front speakers will produce surround channel

audio signals.

Small (Default) Select this when the surround speakers are small.

Large Select this when the surround speakers are large.

1 : Enabling the “Extra Bass” setting allows both the subwoofer and the front

speakers to produce bass audio.

2 : When “Subwoofer” is set to “None,” you can only choose “Large.” If the front

speaker setting is “Small” and you change “Subwoofer” to “None,” it will

automatically change to “Large.”

3 : Enabling the “Crossover” setting allows you to set the frequency components

of audio signals transmitted from the front speakers to the subwoofer.

En 38

SETUP

Setting various functions (Setup menu)

Crossover

Sets the lower limit of low-frequency component output from

speakers set to “Small.”

Audio with a frequency below that limit will be produced from the

subwoofer or the front speakers. J1

SWFR Phase

Sets the phase of the subwoofer if the bass audio is lacking or

unclear.

Extra Bass

Allows the front channel low-frequency components to be

produced exclusively by the subwoofer, or by both the subwoofer

and the front speakers.

■

Controlling the volume of each speaker

Separately adjusts the volume of each speaker. Use iCursor B /

C to select the desired speaker and adjust the volume with

iCursor D / E.

■

Manually setting speaker distance

Adjusts the timing at which the speakers produce audio so that

sounds from the speakers reach the listening position at the same

time.

Selecting adjustment units

Use iCursor B / C to display “Unit,” and then use iCursor D

/ E to choose the units of length (meters or feet).

Setting distances for each speaker

Use iCursor B / C to display the speaker you want to configure,

and then use iCursor D / E to set the distance from the speaker

to your listening position.

40Hz 110Hz

60Hz 120Hz

80Hz (Default) 160Hz

90Hz 200Hz

100Hz

NRM (Default) Does not change the subwoofer phase.

REV Reverses the subwoofer phase.

On The subwoofer and the front speakers produce the

front channel low-frequency components.

Off (Default) Depending on the size of the front speakers, either the

front speakers or the subwoofer produce the front

channel low-frequency components.

When the “Subwoofer” is set to “None,” the “Extra Bass”

setting is disabled.

Level

FL Front speaker L

FR Front speaker R

C Center speaker

SL Surround speaker L

SR Surround speaker R

SWFR Subwoofer

Adjustable range -10.0 dB to +10.0 dB

Default setting 0 dB (FL / FR / SWFR)

-1.0 dB (C / SL / SR)

Adjustment

increments

0.5 dB

Distance

Unit Selects the distance unit (meters or feet).

Front L Front speaker L

Front R Front speaker R

Center Center speaker

Sur. L Surround speaker L

Sur. R Surround speaker R

SWFR Subwoofer

Adjustable range 0.30 m to 24.0 m (1.0 ft to 80.0 ft)

Default setting 3.00 m (10.0 ft) (Front L/Front R/SWFR)

2.60 m (8.5 ft) (Center)

2.40 m (8.0 ft) (Sur. L/Sur. R)

Adjustment

increments

0.10 m (0.5 ft)

1 : If your subwoofer has a volume control or a crossover frequency control, set

the crossover frequency to maximum and the volume to half (or slightly less).

En 39

SETUP

Setting various functions (Setup menu)

■

Adjusting sound quality with the equalizer

Adjusts sound quality of tone using a parametric or graphic

equalizer.

EQ Select

Select an equalizer type.

■

Generating test tones

Turns the test tone generator on or off.

Equalizer

PEQ Uses the parametric equalizer to adjust sound quality.

Selecting this setting applies the tone settings

obtained using YPAO (☞p. 21). J1

GEQ (Default) Uses the graphic equalizer to adjust sound quality. By

pressing iENTER, you can adjust the

characteristics of the graphic equalizer.

Off Does not activate the equalizer.

■ Adjusting the graphic equalizer

When “EQ Select” is displayed, use iCursor D / E

to select “GEQ” and press iENTER.

Check that “Channel” appears and use iCursor

D / E to select the speaker for which you want to

adjust the equalizer.

SL SR

Channel;FRNT L

GEQ

VOL.

The speaker you are adjusting

Press iCursor C repeatedly to select the

frequency you want to adjust, then use iCursor D

/ E to adjust the volume.

Raising volume: Press iCursor E.

Lowering volume: Press

iCursor D.

When you have finished making adjustments,

press hSETUP to close the Setup menu.

SL SR

63Hz

GEQ

VOL.

Frequency band Setting the volume level for

the selected frequency

Frequency

range

63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/

16 kHz

Adjustable

range

-6.0 dB to 0 dB to +6.0 dB

Default setting 0 dB

Adjustment

increments

0.5 dB

You can use iCursor B / C to select another frequency or

return to step 2. Repeat steps 2-3 to adjust the tone to your

liking.

Test Tone

Off (Default) Does not generate test tones.

On Generates test tones. While “On” is selected, test

tones are produced constantly.

You can use the test tone in a variety of circumstances. For

example, you can adjust the volume balance settings for each

speaker, or whenever you adjust the settings on the internal

graphic equalizer, you can listen to the actual effect while

operating this unit. Turn the test tone off when you have finished

making adjustments.

1 : Using YPAO to carry out acoustic measurement selects “PEQ” automatically.

“PEQ” does not appear if the measurement process has not been carried out at

least once.

En 40

SETUP

Setting various functions (Setup menu)

Setting the audio output function of this

unit

Sound Setup submenu

■

Synchronizing audio/video output

Adjusts the delay between audio and video output (Lipsync

function).

HDMI Auto

When connecting to a TV via HDMI, automatically adjusts output

timing if the TV supports an automatic lipsync function.

Auto

Fine-adjust the audio output timing by entering the correction time

provided when “HDMI Auto” is set to “On.”

Manual

Manually adjusts the correction time. Select this when the TV does

not support the automatic lipsync function or “HDMI Auto” is set

to “Off.”

■

Auto-adjusting the sound level to make

even low volumes more audible

Adjusts the dynamic range in conjunction with the volume level

(from minimum to maximum). When you play audio at night or at

low volumes, it is a good idea to set parameter to “Auto.” J1

When the auto function is enabled, it adjusts the dynamic range as

follows.

Lipsync Adjusts the delay between video and audio output.

Adaptive DRC Auto-adjusting the sound level to make even low

volumes more audible.

D.Range Selects the dynamic range adjustment method for

digital audio playback.

Max Volume Sets the maximum volume for this receiver.

Init.Volume Sets the initial volume for when this receiver is turned

on.

HDMI Audio Out Selects audio signals received through the HDMI

input jack.

SL SR

SoundSetup

SETUP

VOL .

Lipsync

Off (Default) Select this when the connected TV does not support

the automatic lipsync function or you do not wish to

use the automatic lipsync function. Set the correction

time in “Manual.”

On Select this when the TV supports the automatic

lipsync function. Fine-adjust the correction time in

“Auto.”

Adjustable range 0 ms to 240 ms

Adjustment

increments

1 ms

Adjustable range 0 ms to 240 ms

Adjustment

increments

1 ms

Default setting 0 ms

Adaptive DRC

Auto Adjusts the dynamic range automatically.

Off (Default) Does not adjust the dynamic range automatically.

Auto

Off

Auto

Off

Input Level Input Level

Volume: low Volume: high

Output Level

1 : The Adaptive DRC setting is also effective when you use headphones.

En 41

SETUP

Setting various functions (Setup menu)

■

Auto-adjusting Dolby Digital and DTS

dynamic range

Selects the dynamic range adjustment method for audio bitstream

(Dolby Digital and DTS) playback.

■

Setting the maximum volume

Sets a maximum volume level so that the audio is not played too

loudly. The default setting of +16.5 dB produces the highest

volume.

■

Setting the startup volume

Sets the initial volume for when this receiver is turned on. When

this parameter is set to “Off,” the volume is set at the level when the

receiver last entered standby mode. J1

■

Changing the output destination of HDMI

input audio signals

Choose whether to playback audio from an external component

such as a BD/DVD player connected via HDMI through this unit or

through a TV.

D.Range

Max (Default) Produces audio without adjusting the dynamic range.

STD Sets the standard dynamic range suitable for home

use.

Min Sets the dynamic range at the lowest level for

playback. This is useful for low-volume audio.

Max Volume

Adjustable range -30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)

Default setting +16.5 dB

Adjustment

increments

5.0 dB

Init.Volume

Adjustable range Off, Mute, -80 dB to +16.5 dB

Default setting Off

Adjustment

increments

0.5 dB

HDMI Audio Out

Amp (Default) Outputs audio through this unit only. When this

setting is selected, the external component outputs an

audio format compatible with this unit.

TV Outputs audio through a TV only. When this setting is

selected, the external component outputs an audio

format compatible with the TV. J2

Amp+TV Outputs audio from the TV and this unit. When this

setting is selected, the external component outputs an

audio format compatible with this unit and TV.

1 : When you set the “Max Volume” at a lower level than “Init.Volume,” the “Max

Volume” setting has priority.

2 : When “TV” is selected, the speakers of this unit do not output sound.

En 42

SETUP

Setting various functions (Setup menu)

Making the receiver easier to use

Func. Setup submenu

■

Changing input source names

Changes the input source names to be shown on the front

panel display.

You can change an input source name by choosing from

a list of templates, or make one of your own.

SETUP

RETURN

ENTER

ECEIVER

ENE

PTION

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

MIT

LEE

V-A

TUNER

NIN

VIE

MUS

TERE

RADI

hSETUP

iCursor B / C / D / E

iENTER

iRETURN

Input Rename Changes the input source names.

AutoPowerDown Goes into standby mode.

Dimmer Sets the Brightness of the front panel

display.

Input Rename

■ Selecting a template

Select “Input Rename” from the Setup

menu and press iENTER.

Select the input source that you want to

rename using iCursor B / C.

SL SR

Func.Setup

SETUP

VOL .

SL SR

HDMI1

HDMI1

VOL .

Renaming the input source

Use iCursor D / E to select a new name

from the following templates.

Confirm the new display name by

pressing iRETURN. Press hSETUP to

exit the Setup menu.

To cancel a name change, select the original name

and then press

iRETURN to exit renaming.

■ Entering an original name

Select “Input Rename” from the Setup

menu and press iENTER.

Select the input source that you want to

rename using iCursor B / C.

Blu-ray Satellite

DVD VCR

SetTopBox Tape

Game MD

TV PC

DVR iPod

CD HD DVD

CD-R (blank)

SL SR

HDMI1

HDMI1

VOL .

Renaming the input source

Press iENTER.

Use iCursor B / C to select the

characters you wish to change, and use

iCursor D / E to enter those characters.

The following characters are available for input

source.

• A to Z, a to z

• 0 to 9

• Symbols (#, *, -, +, etc.)

• Space

Repeat step 4 until you have entered the

new input source name.

Confirm the new display name by

pressing iENTER. Press hSETUP to

exit the Setup menu.

To cancel a name change, press iRETURN.

SL SR

HDMI1

HDMI1

VOL .

Cursor

En 43

SETUP

Setting various functions (Setup menu)

■

Goes enter standby mode automatically

when you leave it without operating

If you do not operate this unit or use the remote control for an

extended period of time, it will automatically go into standby mode

(Auto Power Down function). This function’s default setting is

“Off.” When you wish to activate this function, set the amount of

time to pass before this unit will enter standby.

■

Setting the brightness of the front panel

display

Sets the brightness of the front panel display. Lowering the setting

dims the display.

Setting sound field program parameters

You can set the parameters for the sound field programs (☞p. 44).

Prohibiting setting changes

Prohibits setting changes to prevent careless changes being made

to the settings on Setup menu.

AutoPowerDown

Off (Default) Auto Power Down function is disabled.

4hours Goes into standby mode, when you have not operated

this unit for four hours.

8hours Goes into standby mode, when you have not operated

this unit for eight hours.

12hours Goes into standby mode, when you have not operated

this unit for twelve hours.

This unit starts a countdown of 30 seconds before entering the

standby mode. Pressing any key of the remote control during the

countdown cancels entering the standby mode and reset the

timer.

Dimmer

Adjustable range -4 to 0

Default setting 0

Off (Default) Settings are not protected.

On Prohibits changes to the settings on Setup menu until

it is returned to “Off.”

While set to “On,” the unit displays “Memory

Guard!” when an attempt is made to change the

settings.

SL SR

DSPParameter

SETUP

VOL .

SL SR

Memory Guard

SETUP

VOL .

En 44

SETUP

Although the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters).

To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations.

Setting sound field parameters

Press hSETUP to display the Setup menu.

Use iCursor B / C to select “DSP

Parameter” and press iENTER.

Use iCursor D / E to choose the sound

field program you want to edit.

Press iCursor B / C to select the

parameter that you want to change, and

press iCursor D / E to change the

parameter.

Once you have completed editing, press

hSETUP to close the Setup menu.

■

CINEMA DSP parameters

Change the effect level (level of the sound field effect to

be added). You can adjust the level of the sound field

effect while checking the sound effect.

Setting sound field program parameters

hSETUP

iCursor B / C / D / E

iENTER

SETUP

ENTER

ECEIVER

ENE

PTION

RETURN

ENHAN

R. DE

TRAI

DMI

UDI

TRAN

MIT

LEE

V-A

TUNER

NIN

VIE

MUS

TERE

RADI

SL SR

DSPParameter

SETUP

VOL.

SL SR

Sci-Fi

DSPPRM

VOL .

Sound field program to be edited

When there are multiple parameters in the sound field

program you are configuring, repeat step 4 as

necessary to change other parameters.

■ To initialize the sound field parameters

To set the parameters of the sound field program back

to default, press iCursor C repeatedly during

editing to select “Initialize” and press iCursor E.

When “Press Again >” is displayed, press iCursor

E again to initialize.

To cancel operations, press iCursor D when “Press

Again” appears and return to the original display.

SL SR

DSPLevel;;0dB

DSPPRM

VOL .

Sound field parameter Choices

SL SR

Initialize

DSPPRM

VOL .

DSP Level

Adjustable range -6 dB to 0 dB to +3 dB

Default setting 0 dB

Adjust “DSP Level” as follows:

• The effect sound is too soft.

• There are no differences between effects of the sound

field programs.

→ Increase the effect level.

• The sound is dull.

• The sound field effect is added too much.

→ Reduce the effect level.

En 45

SETUP

Setting sound field program parameters

■

Parameters usable in certain sound field

programs

2ch Stereo only

Automatically bypasses the DSP circuit and tone control circuit

depending on the condition of tone control etc., when an analog

sound source is played back. You can enjoy a higher quality sound.

5ch Stereo only

Adjusts the center channel volume. J1

Adjusts the volume of the surround L channel. J1

Adjusts the volume of the surround R channel. J1

Straight Enhancer/5ch Enhancer only

Adjusts the effect level of the compressed music enhancer mode.

■

Parameters usable in surround decoder

q PLII Music only

Adjusts the soundscape of the front sound field. Sends front left/

right channels sounds to the surround speakers as well as the front

speakers for a wraparound effect.

Spreads the center channel sound to the front left and right

speakers to suit your needs or preferences. Set this parameter to 0

for outputting the center sound from the center speaker only, or to 7

for outputting it from the front left/right speaker only.

Adjusts the difference in level between the front sound field and

the surround sound field. You can adjust the difference in level

created by the software being played back to obtain the preferred

sound balance.

The surround sound gets stronger as you make the value more

negative, and the front sound gets stronger as you make the value

more positive.

Direct

Auto (Default) Outputs sound by bypassing the DSP circuit and tone

control circuit when both tone controls of “Bass” and

“Treble” are set to 0dB.

Off Does not bypass the DSP circuit and tone control

circuit.

CT Level

Adjustable range 0 to 100%

Default setting 100%

SL Level

Adjustable range 0 to 100%

Default setting 100%

SR Level

Adjustable range 0 to 100%

Default setting 100%

EFCT LVL

High (Default) Standard effect.

Low Sets when the high-frequency signals of the source are

emphasized excessively.

Panorama

Off (Default) Disables the effect.

On Enables the effect.

CT Width

Adjustable range 0 to 7

Default setting 3

Dimension

Adjustable range -3 to STD to +3

Default setting STD (Standard)

1 : Not displayed when speakers are set to be inactive.

En 46

SETUP

The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.

Displaying/Setting the Advanced

Setup menu

Set this unit to the standby mode.

Press A while pressing and holding

STRAIGHT on the front panel.

Release the keys when “ADVANCED SETUP” is

displayed on the front panel display.

After approximately 3 seconds, the top menu items are

displayed.

Use PROGRAM to select the item to be set

from the following items.

In the Advanced Setup menu, you can set the following

settings.

Press STRAIGHT a few times to select the

value you wish to change.

Switch this unit to the standby mode, and

then switch it on again.

The settings become effective and the unit is powered

on. If initialization is selected, it will be performed

when the unit is powered on again.

Avoiding crossing remote control

signals when using multiple

Yamaha receivers

The remote control of the unit can only receive signals

from a receiver which has an identical ID (remote

control ID). When using multiple Yamaha AV receivers,

you can set each remote control with a unique remote

control ID for its corresponding receiver.

On the contrary, if you are setting the same remote

control ID for all receivers, you can use one remote

control to operate 2 receivers.

Initializing various settings for this

unit

Initializes various settings stored in this unit and sets it

back to default.

Select the items to be initialized from the following.

Extended functionality that can be configured as needed (Advanced Setup menu)

gSCENE

iCursor D

DVD

ENTER

EIVER

PTI

RETURN

NHAN

R. DE

TRAI

DMI

UDI

TRAN

LEE

-A

UNE

PRE

NIN

VIE M

TERE

RADI

REMOTE ID Changes the remote control ID of a

receiver.

INIT Initializes various settings for this unit.

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFO

MEMORY

PRESET

FM AM

YPAO MIC

STRAIGHT

PROGRAM l / h

REMOTEID-ID1

ID1 (Default) Receives the remote control signals set in

ID1.

ID2 Receives the remote control signals set in

ID2.

REMOTEID-ID1

■ To change the remote control ID

• To set to ID1

Press

iCursor D and “BD/DVD” under gSCENE

for 3 seconds or longer.

• To set to ID2

Press

iCursor D and “TV” under gSCENE for

3 seconds or longer.

DSP PARAM Initializes all parameters for the sound

field programs.

ALL Resets this unit to default factory settings.

CANCEL (Default) Does not initialize.

INIT-CANCEL

En 47

APPENDIX

Refer to the table below when this unit does not function properly.

If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service

center.

General

Troubleshooting

Problem Cause Remedy

See

page

The power will not

turn on.

The protection circuitry operated

three times consecutively.

As a safety precaution, when the protection

circuitry operates three times consecutively,

the capability to turn on the power is

disabled. Please contact your nearest

Yamaha dealer or service center to request

repair.

—

The unit enters

standby mode soon

after the power is

turned on.

The power cable is not completely

inserted.

Connect the power cable properly to an AC

wall outlet.

—

(When this unit is turned back on

and “CHECK SP WIRES!” is

displayed.) The protection

circuitry has been activated

because this unit was turned on

while a speaker cable was shorted.

Make sure that all speaker cables between

this unit and speakers are connected

properly.

This unit cannot be

turned off or does

not work properly.

The internal microcomputer is

hung-up due to an external electric

shock (such as lightning or

excessive static electricity) or by a

drop in power supply voltage.

Disconnect the power cable from the AC

wall outlet, wait about 30 seconds and then

plug it in again.

—

The batteries in the remote control

may have lost their charge.

Replace all batteries. 4

The unit enters

standby mode.

The protection circuitry has been

activated because of a short circuit,

etc.

Check that the speaker with an impedance

of at least 6Ω.

—

After display of a

countdown on the

front panel, the unit

goes into standby

mode.

If you do not use take any action,

the Auto Power Down function

operates.

Turn on the unit, and play the source again. —

In the Setup menu “AutoPowerDown”

(“Func. Setup” → “AutoPowerDown”),

increase the time until switching to standby

mode, or turn off the Auto Power Down

function.

“Internal Error” is

displayed on the

front panel display.

An internal error has occurred. Please contact authorized Yamaha dealer or

service center to request repair.

—

Sound/images

suddenly go off.

The protection circuitry has been

activated because of a short circuit,

etc.

Check that the speaker wires are not

touching each other, then turn the unit back

on.

—

The sleep timer has turned off the

unit.

Turn on the unit, and play the source again. —

Problem Cause Remedy

See

page

En 48

APPENDIX

Troubleshooting

No sound. Incorrect input or output cable

connections.

Connect the cables properly. If the problem

persists, the cables may be defective.

If a DVI-HDMI cable is used to

connect the unit with an external

component, then it is necessary to

use an audio input jack for a

different input to output audio.

Display the HDMI Input Option menu for

the connected cable, select “Audio In,” and

select the jack to use for audio input.

Speaker connections are not

secure.

Secure the connections. 11

The HDMI components connected

to the unit do not support the

HDCP copy protection standards.

Connect HDMI components that support the

HDCP copy protection standards.

The audio input into the device is

set to playback through the TV.

In the Setup menu, set the HDMI Audio Out

(“Sound Setup” → “HDMI Audio Out”) to

other than “TV.”

No appropriate input source has

been selected.

Select an appropriate input source with

cInput selector (on the remote control).

The volume is turned down or

muted.

Turn up the volume. —

Signals that this unit cannot

reproduce are being input from a

source component, such as a CD-

ROM.

Use an input source that has signals that can

be reproduced on this unit.

—

No picture. A video jack (ex. Video input →

HDMI output) type different to the

input video is being used to try to

display content on the TV.

Use video jacks of the same type (ex. Video

input → Video output) to connect to the TV.

An appropriate video input is not

selected on the TV.

Select an appropriate video input on the TV. —

Problem Cause Remedy

See

page

No sound is output

from a specific

speaker.

The speaker is malfunctioning.

Check the Speaker indicators on

the front panel display. If the

corresponding indicator lights up,

connect another speaker and check

if sound is output.

If sound is not output, the unit may be

malfunctioning.

The playback component or

speakers are not connected

properly.

Connect the cables properly. If the problem

persists, the cables may be defective.

11, 15

Output from that speaker is

disabled.

Check the Speaker indicators on the front

panel display. If the corresponding indicator

is turned off, try the following.

1) Change to a different input source.

2) With the selected sound field program,

sound is not output from that speaker. Select

another sound field program.

3) “None” may have been selected for that

speaker on this unit. Display “Speaker

Setup” in the Setup menu, and set respective

parameters to enable output from that

speaker (“Speaker Setup” → “Config”).

7, 37

The volume of that speaker is set

to the minimum in “Speaker

Setup” in the Setup menu.

Display “Speaker Setup” in the Setup menu

and adjust the volume (“Speaker Setup” →

“Level”).

(If hardly any sound comes from

one channel)

Speaker output balance is not set

correctly.

Balance the volume of each speaker from

“Level” in the Setup menu (“Speaker Setup”

→ “Level”).

Sound may not be output from

certain channels, depending on the

input source or sound field

program.

Try another sound field program. 26

Only the center

speaker outputs

substantial sound.

When a monaural source sound

field program is applied, for some

surround decoders, sound from all

channels is output from the center

speaker.

Try another sound field program. 26

Problem Cause Remedy

See

page

En 49

APPENDIX

Troubleshooting

HDMI™

No sound is heard

from the surround

speakers.

This unit is in straight decoding

mode and a monaural source is

being played back.

Press fSTRAIGHT (on the remote

control) to exit straight decoding mode.

Sound may not be output from

certain channels depending on

input sources or sound field

programs.

Try another sound field program. 26

No sound is heard

from the subwoofer.

A subwoofer is not connected, or it

is disabled.

Check that a subwoofer is connected

correctly, and from the Setup menu

“Subwoofer” (“Speaker Setup” → “Config”

→ “Subwoofer”), set the subwoofer to

“On.”

The subwoofer is turned off. Turn the subwoofer power on.

If the subwoofer includes an Auto Power

Off function, then lower the Auto Power Off

sensitivity settings.

—

The source does not contain LFE

(☞p. 52) or low frequency signals.

—

The right

combination of audio

/ video jacks to

connect cannot be

found.

Combine input connected to the

external component video output

with another input audio jack.

Select a desired input source (HDMI1-4 or

AV1-2) as a video input and select a audio

input source from “Audio In” in the Option

menu.

The audio input

sources cannot be

played in the desired

digital audio signal

format.

The connected component is not

set to output the desired digital

audio signals.

Set the playback component properly

referring to its instruction manual.

—

This unit does not support

playback of HD Audio (TrueHD,

Dolby Digital plus, DTS Master

Audio, etc.) or DTS 96/24, etc.

Signals, such as HD Audio and DTS 96/24,

can be played by standard decoders (Dolby

Digital, DTS Digital Surround, etc.).

—

There is noise

interference from

digital or radio

frequency

equipment.

This unit is too close to other

digital or radio frequency

equipment.

Move this unit further away from such

equipment.

—

Problem Cause Remedy

See

page

Noise/hum noise is

heard.

Incorrect cable connection.

Connect the audio cables properly.

If the problem persists, the cables may be

defective.

—

A DTS-CD is being played back. If a DTS bitstream signal is not properly

input to this unit, only noise is output.

Connect the playback component to this

unit by digital connection and play back the

DTS-CD.

If the condition is not resolved, the problem

may result from the playback component.

Consult the manufacturer of the playback

component.

—

The volume cannot

be increased, or the

sound is distorted.

The component connected to the

output jacks of this unit is not

turned on.

When the component connected to the

output jacks of this unit is not turned on, the

sound may be distorted, or the volume may

decreased due to the nature of AV receivers.

Turn on all components connected to this

unit.

—

“Max Volume” is set to a low

value.

Set it to a higher value. 41

Problem Cause Remedy

See

page

The front panel

display HDMI

indicator is flashing.

An error with the HDMI

connection has occurred.

Try re-inserting the HDMI cable. —

Confirm that HDMI video that is not

supported by the unit is not being input

(HDMI Input → Option menu → “Signal

Info”).

No picture or sound. The number of components is over

the limit.

Disconnect some of the HDMI components. —

The connected HDMI component

does not support high-bandwidth

digital copyright protection

(HDCP).

Connect an HDMI component that supports

HDCP.

—

Problem Cause Remedy

See

page

En 50

APPENDIX

Troubleshooting

Tuner (FM/AM)

FM AM

Problem Cause Remedy

See

page

FM stereo reception

is noisy.

You are too far from the station

transmitter, or the input from the

antenna is weak.

Check the antenna connections. 20

Switch to monaural mode. 30

Replace the outdoor antenna with a more

sensitive multi-element antenna.

—

There is distortion,

and clear reception

cannot be obtained

even with a good FM

antenna.

There is multi-path interference. Adjust the antenna height or orientation, or

place it in a different location.

—

The desired station

cannot be tuned into

with the automatic

tuning method.

You are in an area far from a

station, or input from the antenna

is weak.

Replace the outdoor antenna with a more

sensitive multi element antenna.

—

Use dTUNING H / I (on the remote

control) to manually select the station.

“No Presets” is

displayed.

No preset stations are registered. Register stations you wish to listen to as

preset stations before operation.

Problem Cause Remedy

See

page

The desired station

cannot be tuned into

with the automatic

tuning method.

The signal is weak, or the antenna

connections are loose.

Adjust the AM loop antenna orientation. 20

Use the manual tuning method. 30

Automatic station

preset does not

work.

Automatic station preset is not

available for AM stations.

Use manual station preset. 31

Continuous

crackling and

hissing noises are

heard.

The supplied AM loop antenna is

not connected.

Connect the AM loop antenna correctly

even if you use an outdoor antenna.

The noises may be caused by

lightning, fluorescent lamps,

motors, thermostats, or other

electrical equipment.

It is difficult to completely eliminate noise,

but it can be reduced by installing and

properly grounding an outdoor AM antenna.

Buzzing and whining

noises are heard.

A TV set is being used nearby. Move this unit away from the TV set. —

En 51

APPENDIX

Troubleshooting

Remote control

Problem Cause Remedy

See

page

The remote control

does not work or

function properly.

Wrong distance or angle. The remote control will function within a

maximum range of 6 m / 20 ft, and no more

than 30 degrees off-axis from the front

panel.

—

Direct sunlight or lighting (from

an inverter type of fluorescent

lamp, strobe light, etc.) is striking

the remote control sensor of this

unit.

Adjust the lighting angle, or reposition this

unit.

—

The batteries are weak. Replace all batteries. 4

The remote control ID of the

remote control and this unit do not

match.

Match the remote control ID of this unit and

the remote control.

External components

cannot be controlled

using the remote

control.

The remote control code is not

correctly set.

If this unit does not work when you press

iCursor B / C / D / E (on the remote

control), do the following.

When the key does not work during DVD

disc menu operation: press the cInput

selector (on the remote control) again.

—

When the key does not work during Option

menu/Setup menu operation: press the key

corresponding to the current menu operation

again.

—

Even if the remote control code is correctly

set, there are some models that do not

respond to the remote control.

—

En 52

APPENDIX

Audio information

Audio and video synchronization (lip sync)

Lip sync, an abbreviation for lip synchronization, is a technical term that

involves both a problem, and the capability of maintaining audio and video

signals synchronized during post-production and transmission.

Whereas the audio and video latency requires complex end-user

adjustment, HDMI version 1.3 incorporates an automatic audio and video

syncing capability that allows devices to perform this synchronization

automatically and accurately without user interaction.

Dolby Digital

Dolby Digital is a digital surround sound system that gives you completely

independent multi-channel audio. With 3 front channels (front L/R and

center), and 2 surround stereo channels, Dolby Digital provides 5 full-range

audio channels. With an additional channel especially for bass effects,

referred to as LFE (Low-Frequency Effect), the system has a total of 5.1-

channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the

surround speakers, more accurate moving sound effects and surround sound

environments are possible than with Dolby Surround. The wide dynamic

range from maximum to minimum volumes that are reproduced by the 5

full-range channels, and the precise sound orientation generated using

digital sound processing provides listeners with unprecedented excitement

and realism. With this unit, any sound environment from monaural up to a

5.1-channel configuration can be freely selected for your enjoyment.

Dolby Pro Logic II

Dolby Pro Logic II is an improved technique used to decode vast numbers

of existing Dolby Surround sources. This new technology enables a discrete

5-channel playback with 2 front left and right channels, 1 center channel,

and 2 surround left and right channels, instead of only 1 surround channel

for conventional Pro Logic technology. There are three modes available:

“Music mode” for music sources, “Movie mode” for movie sources, and

“Game mode” for game sources.

Dolby Surround

Dolby Surround uses a 4-channel analog recording system to reproduce

realistic and dynamic sound effects: 2 front left and right channels (stereo),

a center channel for dialog (monaural), and a surround channel for special

sound effects (monaural). The surround channel reproduces sound within a

narrow frequency range. Dolby Surround is widely used with nearly all

video tapes and laser discs, as well as in many TV and cable broadcasts.

The Dolby Pro Logic decoder built into this unit employs a digital signal

processing system that automatically stabilizes the volume on each channel

to enhance moving sound effects and directionality.

DTS Digital Surround

DTS Digital Surround was developed to replace the analog soundtracks of

movies with a 5.1-channel digital sound track, and is now rapidly gaining

popularity in movie theaters around the world. DTS, Inc. has developed a

home theater system so that you can enjoy the depth of sound and natural

spatial representation of DTS Digital Surround in your home. This system

produces practically distortion-free 5.1-channel sound (technically, left,

right and center channels, 2 surround channels, plus an LFE 0.1 channel as

a subwoofer, for a total of 5.1-channels).

DSD

Direct Stream Digital (DSD) technology stores audio signals on digital

storage media, such as Super Audio CDs. Using DSD, signals are stored as

single bit values at a high-frequency sampling rate of 2.8224 MHz, while

noise shaping and oversampling are used to reduce distortion, a common

occurrence with very high quantization of audio signals. Due to the high

sampling rate, better audio quality can be achieved than that offered by the

PCM format used for normal audio CDs. The frequency is equal to or

higher than 100 kHz, with a dynamic range of 120 dB. This unit can

transmit or receive DSD signals via the HDMI jack.

LFE 0.1 channel

This channel reproduces low-frequency bass signals, and has a frequency

range from 20 Hz to 120 Hz. This channel is counted as 0.1, because it only

enforces a low-frequency range compared to the full-range reproduced by

the other 5 channels in Dolby Digital or DTS 5.1-channel systems.

PCM (Linear PCM)

Linear PCM is a signal format under which an analog audio signal is

digitized, recorded and transmitted without using any compression. This is

used as a method of recording CDs and DVD audio. The PCM system uses

a technique for sampling the size of the analog signal per very small unit of

time. Standing for “Pulse Code Modulation,” the analog signal is encoded

as pulses and then modulated for recording.

Sampling frequency and number of quantized bits

When digitizing an analog audio signal, the number of times the signal is

sampled per second is called the sampling frequency, while the degree of

accuracy when converting the sound level into a numeric value is called the

number of quantized bits. The range of rates that can be played back is

determined based on the sampling rate, whereas the dynamic range

representing the sound level difference is determined by the number of

quantized bits. In principle, the higher the sampling frequency, the wider

the range of frequencies that can be played back, and the higher the number

of quantized bits, the more accurately the sound level can be reproduced.

Sound field program information

CINEMA DSP

Since the Dolby Surround and DTS systems were originally designed for

use in movie theaters, their effect is best felt in a theater having many

speakers designed for acoustic effects. Since home conditions, such as

room size, wall material, number of speakers, and so on, can differ so

widely, it is inevitable that there are differences in the sound that is heard.

Based on a wealth of actually measured data, Yamaha CINEMA DSP uses

Yamaha’s original DSP technology to combine Dolby Pro Logic, Dolby

Digital, and DTS systems to provide the audiovisual experience of a movie

theater in the listening room of your own home.

Compressed music enhancer

The Compressed music enhancer feature of this unit enhances your

listening experience by regenerating the missing harmonics in compression

artifacts. As a result, it compensates for flattened complexity due to the loss

of high-frequency fidelity as well as lack of bass due to the loss of low-

frequency bass, providing improved performance for the overall sound

system.

Glossary

En 53

APPENDIX

Glossary

SILENT CINEMA

Yamaha has developed a natural, realistic sound effect DSP algorithm for

headphones. Parameters for headphones have been set for each sound field

program, so that accurate representations of all the sound field programs

can be enjoyed on headphones.

Virtual CINEMA DSP

Yamaha has developed a Virtual CINEMA DSP algorithm that allows you

to enjoy DSP surround effects even without any surround speakers, by

using virtual surround speakers. It is even possible to enjoy Virtual

CINEMA DSP using a minimal two-speaker system that does not include a

center speaker.

Video information

Component video signal

With the component video signal system, the video signal is separated into

the Y signal for luminance and the P

B and PR signals for chrominance.

Color can be reproduced more faithfully with this system because each of

these signals is independent. The component signal is also called the “color

difference signal” because the luminance signal is subtracted from the color

signal. A monitor with component input jacks is required in order to output

component signals.

Composite video signal

With the composite video signal system, the video signal comprises the

three basic elements of a video picture: color, brightness and

synchronization data. A composite video jack on a video component

transmits these three elements combined.

Deep Color

Deep Color refers to the use of various color depths in displays, up from the

24-bit depths in previous versions of the HDMI specification. This extra bit

depth allows HDTVs and other displays increase from millions of colors to

billions of colors and eliminate on-screen color banding for smooth tonal

transitions and subtle gradations between colors. The increased contrast

ratio can represent many times more shades of gray between black and

white. Additionally, Deep Color increases the number of available colors

within the boundaries defined by the RGB or YCbCr color space.

HDMI

HDMI (High-Definition Multimedia Interface) is the first industry

supported, uncompressed, all-digital audio/video interface. Providing an

interface between any sources (such as set-top boxes or AV receivers) and

audio/video monitors (such as digital TV), HDMI supports standard,

enhanced or high-definition video as well as multichannel digital audio

using a single cable. HDMI transmits all ATSC HDTV standards and

supports 8-channel digital audio, with bandwidth to spare to accommodate

future enhancements and requirements.

When used in combination with HDCP (High-bandwidth Digital Content

Protection), HDMI provides a secure audio/video interface that meets the

security requirements of content providers and system operators. For

further information on HDMI, visit the HDMI website at “http://

www.hdmi.org/.”

“x.v.Color”

A color space standard supported by HDMI version 1.3. It is a more

extensive color space than sRGB, and allows the expression of colors that

were not hitherto possible. While remaining compatible with the color

gamut of sRGB standards, “x.v.Color” expands the color space, and can

thus produce more vivid, natural images. It is particularly effective for still

pictures and computer graphics.

En 54

APPENDIX

■ HDMI signal compatibility

Audio signals

• If the input source component can decode the bitstream audio signals of audio commentaries, you can play back the audio

sources with the audio commentaries mixed down by using the digital audio input (optical or coaxial) connections.

• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.

Video signals

This unit is compatible with the video signals of the following resolutions:

Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;

6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are

“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered

trademarks of HDMI Licensing LLC.

“SILENT CINEMA” is a trademark of Yamaha Corporation.

Information on HDMI™

Audio signal types Audio signal formats Compatible media

2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc.

Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD,

etc.

DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc.

Bitstream Dolby Digital, DTS DVD-Video, etc.

NOTES

• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output,

depending on the type of the DVD player.

• This unit is not compatible with HDCP-incompatible HDMI or DVI components.

• Refer to the supplied instruction manuals for details.

To decode audio bitstream signals on this unit, set the input source component appropriately so that the

component outputs the bitstream audio signals directly (does not decode the bitstream signals on the

component).

• This unit is not compatible with the audio commentary features (for example, the special audio contents

downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not play back the audio

commentaries of the Blu-ray Disc or HD DVD content.

– 480i/60 Hz

– 576i/50 Hz

– 480p/60 Hz

– 576p/50 Hz

– 720p/60 Hz, 50 Hz

– 1080i/60 Hz, 50 Hz

– 1080p/60 Hz, 50 Hz, 24 Hz

About trademarks

En 55

APPENDIX

■ HDMI specification

• Deep Color

• x.v.Color

• Auto Lip sync

■ INPUT/OUTPUT

Input jacks

• HDMI input x 4

• AV input x 5

[Audio] Digital input (optical) x 2, digital input (coaxial) x 2,

analog input x 1

[Video] Component video jacks x 2, video jacks x 3

• AUDIO input x 2

[Audio] Analog jack x 2

• VIDEO AUX input x 1

[Audio] Analog x 1, stereo mini jack x 1

[Video] Video jack x 1

Output jacks

• TV output (monitor output) x 3

[Audio/Video] HDMI x 1

[Video] Component video jack x 1, video jack x 1

• AV output x 2

[Audio] Analog jack x 1

[Video] Video jack x 1

• AUDIO output x 1

[Audio] Analog jack x 1

■ AUDIO SECTION

• Surround Decoder

Dolby Digital, Dolby Pro Logic, Dolby Pro Logic II

DTS Digital Surround

DSD

• Minimum RMS Output Power for Front, Center, Surround

[U.S.A. and Canada models]

(1 kHz, 0.9% THD, 8 Ω)

FRONT L/R........................................................................100 W/ch

CENTER .................................................................................100 W

SURROUND L/R...............................................................100 W/ch

[Other models]

(1 kHz, 0.9% THD, 6 Ω)

FRONT L/R........................................................................100 W/ch

CENTER .................................................................................100 W

SURROUND L/R...............................................................100 W/ch

• Dynamic Power (IHF)

[U.S.A. and Canada models]

Front Speakers 8/6/4/2 Ω .................................. 110/130/160/180 W

[Other models]

Front Speakers 6/4/2 Ω ............................................ 105/130/150 W

• Maximum Useful Output Power (JEITA)

[China, Korea, General and Asia models]

1 kHz, 10% THD, 6 Ω ............................................................135 W

• Maximum Output Power [U.K., Europe and Asia models]

1 kHz, 0.7% THD, 4 Ω ...........................................................120 W

• IEC Output Power [U.K., Europe and Asia models]

Front Speakers 1 kHz, 0.9% THD, 8 Ω .........................95 W+95 W

• Dynamic Headroom [U.S.A. and Canada models]

8 Ω.........................................................................................0.23 dB

• Input Sensitivity/Input Impedance

AV5, etc..................................................................... 200 mV/47 kΩ

• Maximum Input Voltage

AV5, etc. (1 kHz, 0.5% THD) ..................................... 2.3 V or more

• Rated Output Voltage/Output Impedance

AUDIO OUT............................................................ 200 mV/1.2 kΩ

SUBWOOFER (2ch Stereo & Front: Small) ............... 1.0 V/1.2 kΩ

• Headphone Jack Rated Output/Impedance

AV5, etc. (1 kHz, 50 mV, 8 Ω).................................. 100 mV/470 Ω

• Frequency Response

AV5 to FRONT .....................................10 Hz to 100 kHz, +0/-3 dB

• Total Harmonic Distortion

AV 5 , e t c . t o F RO N T

[U.S.A. and Canada models] (1 kHz, 50 W, 8 Ω)........ 0.06% or less

[Other models] (1 kHz, 50 W, 6 Ω) ............................. 0.06% or less

• Signal to Noise Ratio (IHF-A Network)

AV5, etc. Input Shorted (250 mV to Front Speakers)

................................................................................. 98 dB or more

• Residual Noise (IHF-A Network)

Front Speakers ........................................................... 150 µV or less

• Channel Separation (1 kHz/10 kHz)

AV5, etc. (5.1 kΩ shortened) ...........................60 dB/45 dB or more

• Volume Control ...................................... MUTE / -80 dB to +16.5 dB

• Tone Control (Front Speakers)

BASS Boost/Cut ............................................ ±10 dB/2 dB at 50 Hz

BASS Turnover Frequency .................................................... 350 Hz

TREBLE Boost/Cut ..................................... ±10 dB/2 dB at 20 kHz

TREBLE Turnover Frequency.............................................. 3.5 kHz

• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)

H.P.F. (Front, Center, Surround) ....................................... 12 dB/oct.

L.P.F. (Subwoofer) ............................................................ 24 dB/oct.

■ VIDEO SECTION

• Video Signal Type

[U.S.A., Canada, Korea and General models] ........................ NTSC

[Other models] ............................................................................PAL

• Signal Level

Composite ..................................................................... 1 Vp-p/75 Ω

Component.......................1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (P

B/PR)

• Maximum Input Level (Video Conversion Off) ....... 1.5 Vp-p or more

• Signal to Noise Ratio.................................................... 50 dB or more

• Frequency Response [MONITOR OUT]

Component (Video Conversion Off)............5 Hz to 60 MHz, ±3 dB

Specifications

En 56

APPENDIX

■ FM SECTION

• Tuning Range

[U.S.A. and Canada models] ...............................87.5 to 107.9 MHz

[Asia and General models] ........... 87.5/87.50 to 108.0/108.00 MHz

[Other models].................................................87.50 to 108.00 MHz

• 50 dB Quieting Sensitivity (IHF)

Mono..................................................................... 3.0 µV (20.8 dBf)

• Signal to Noise Ratio (IHF)

Mono/Stereo ................................................................. 74 dB/69 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo ....................................................................... 0.3/0.3%

• Antenna Input (unbalanced).........................................................75 Ω

■ AM SECTION

• Tuning Range

[U.S.A. and Canada models]...................................530 to 1710 kHz

[Asia and General models]..................... 530/531 to 1710/1611 kHz

[Other models] ........................................................531 to 1611 kHz

■ GENERAL

• Power Supply

[U.S.A. and Canada models].................................. AC 120 V, 60 Hz

[General models]......................... AC 110-120/220-240 V, 50/60 Hz

[China model].........................................................AC 220 V, 50 Hz

[Korea model] ........................................................AC 220 V, 60 Hz

[Australia model] ................................................... AC 240 V, 50 Hz

[U.K. and Europe models] ..................................... AC 230 V, 50 Hz

[Asia models] ............................................ AC 220-240 V, 50/60 Hz

• Power Consumption

[U.S.A. and Canada models] .....................................250 W/320 VA

[Other models] ........................................................................250 W

• Standby Power Consumption

[General models] ..........................................................1.0 W or less

[Other models] ..............................................................0.5 W or less

• Dimensions (W x H x D)

435 x 151 x 315 mm (17-1/8 x 6 x 12-3/8 in)

• Weight

7.5 kg (16.5 lbs)

* Specifications are subject to change without notice.

Advanced Setup menu ................................................................. 46

AM tuning .................................................................................... 30

Antenna connection ..................................................................... 20

Cable plug .................................................................................... 12

Connections.................................................................................... 9

External device connection .......................................................... 12

FM tuning..................................................................................... 30

Front panel ..................................................................................... 5

Front panel display......................................................................... 7

Jack .............................................................................................. 12

Option menu................................................................................ 34

Rear panel...................................................................................... 6

Remote control, Part names and functions.................................... 8

SCENE function.......................................................................... 26

Setup menu.................................................................................. 36

Sound field program.................................................................... 26

Sound field program parameter setting ....................................... 44

Speaker connection ....................................................................... 9

Speaker setting ............................................................................ 21

Supplied accessories...................................................................... 4

Index

YC434B0/OMEN2

Documenttranscriptie

Owner’s Manual AV Receiver English for Europe CONTENTS INTRODUCTION Features and capabilities ................................................... 3 About this manual............................................................. 4 Supplied accessories......................................................... 4 Part names and functions.................................................. 5 Front panel........................................................................ 5 Rear panel......................................................................... 6 Front panel display ........................................................... 7 Remote control ................................................................. 8 CONNECTIONS Connecting speakers .......................................................... 9 Speaker channels and functions........................................ 9 Speaker layout ................................................................ 10 Connecting speakers....................................................... 10 Connecting external devices............................................ 12 Cable plugs and jacks ..................................................... 12 Connecting a TV monitor............................................... 13 Connecting BD/DVD players and other devices ............ 15 Connecting video cameras and portable audio players .. 19 Transmitting input A/V to external devices.................... 19 Connecting the FM/AM antennas .................................. 20 Set up the speaker parameters automatically (YPAO) .............................................................................. 21 PLAYBACK Basic playback procedure ............................................... 25 Adjusting high/low-frequency sound (Tone control) ..... 25 Changing input settings with a single key (SCENE function) ............................................................ 26 Registering input sources/sound field program .............. 26 Enjoying sound field programs....................................... 26 Selecting sound field programs and sound decoders...... 26 Sound field programs ..................................................... 28 FM/AM tuning ................................................................. 30 Selecting a frequency for reception (Normal tuning)..... 30 Registering and recalling a frequency (Preset tuning) ... 31 Clearing preset stations .................................................. 32 Radio Data System tuning.............................................. 32 SETUP Video information .......................................................... 53 Information on HDMI™................................................. 54 About trademarks ........................................................... 54 Specifications.................................................................... 55 Index ................................................................................. 56 Configuring the settings specific for each input source (Option menu) .................................................................. 34 Option menu display and setup ...................................... 34 Option menu items ......................................................... 34 Setting various functions (Setup menu)......................... 36 Setup menu display and settings .................................... 36 Setup menu items ........................................................... 36 Manages settings for speakers........................................ 37 Setting the audio output function of this unit................. 40 Making the receiver easier to use ................................... 42 Setting sound field program parameters......................... 43 Prohibiting setting changes ............................................ 43 Setting sound field program parameters ....................... 44 Setting sound field parameters ....................................... 44 Extended functionality that can be configured as needed (Advanced Setup menu)................................. 46 Displaying/Setting the Advanced Setup menu............... 46 Avoiding crossing remote control signals when using multiple Yamaha receivers ............................................. 46 Initializing various settings for this unit......................... 46 APPENDIX Troubleshooting ............................................................... 47 General ........................................................................... 47 HDMI™ ......................................................................... 49 Tuner (FM/AM) ............................................................. 50 Remote control ............................................................... 51 Glossary ............................................................................ 52 Audio information .......................................................... 52 Sound field program information ................................... 52 En 2 INTRODUCTION Features and capabilities ■ Built-in high-quality, high-power 5-channel amplifier ■ 1-button input/sound field program switching (SCENE function) .......................26 ■ Speaker connections for 2- to 5.1-channel configurations – – – – Speaker channels and functions .................................................................................................................9 Speaker layout..........................................................................................................................................10 Speaker cable connection.........................................................................................................................10 Subwoofer cable connection ....................................................................................................................11 ■ Acoustic parameter adjustment to match your speakers and listening environment – Automatic settings for speaker acoustic parameters (YPAO - Yamaha Parametric Room Acoustic Optimizer).......................................................................21 – Specifying the settings for each speaker..................................................................................................37 – Volume control for each speaker..............................................................................................................38 – Speaker distance settings .........................................................................................................................38 – Sound quality control with the equalizer <Graphic Equalizer> ..............................................................39 – Test tone speaker adjustment ...................................................................................................................39 – Bass and treble level adjustment <Tone Control> ...................................................................................25 ■ External device connection and playback – – – – – – – – – – – – – Cables and input/output jacks for this unit ..............................................................................................12 TV connection..........................................................................................................................................13 TV audio playback through this receiver.................................................................................................14 Connections for BD/DVD players (recorders) and other devices............................................................15 Audio signal output to the TV connected via the HDMI jack .................................................................41 Correction of lag between audio and video signals <Lipsync>...............................................................40 External audio and video recorder connections .......................................................................................19 HDMI/AV video input combining other audio input...............................................................................35 Front panel external device connections (for video cameras, portable music players, etc.)....................19 Protective cover for front panel jacks ........................................................................................................4 Changing the input source names <Input Rename> ................................................................................42 Configuring the settings specific for each input source <Option menu> ................................................34 Playback from external devices ...............................................................................................................25 ■ Multi-channel, multi-format playback – – – – – Sound field effect selection......................................................................................................................26 Playback without sound field effects .......................................................................................................27 Stereo playback........................................................................................................................................27 Sound field effect configuration ..............................................................................................................44 Compressed-music playback ...................................................................................................................26 ■ Front panel information display – Front panel display information switching ................................................................................................7 – Front panel display brightness adjustment <Dimmer>............................................................................43 – Digital video/audio signal information display <Signal Info> ................................................................35 ■ Volume/sound quality adjustment functions – – – – Easy listening at low volumes <Adaptive DRC> ....................................................................................40 Maximum volume settings.......................................................................................................................41 Startup volume settings............................................................................................................................41 Adjusting volume between input sources <Volume Trim> .....................................................................34 ■ Remote control operation – Remote control names and functions.........................................................................................................8 – Insert batteries into the remote control ......................................................................................................4 – Multiple Yamaha receiver operation without signal interference <Remote ID Switching>....................46 ■ Other features – – – – Standby mode after prolonged non-operation <Auto Power Down function>........................................43 Standby mode after a specific amount of time <Sleep timer>...................................................................8 Initializing various settings for this unit ..................................................................................................46 Prohibiting setting changes <Memory Guard>........................................................................................43 ■ FM/AM Tuner – – – – FM/AM broadcast listening .....................................................................................................................30 Simple preset tuning ................................................................................................................................31 Radio Data System tuning .......................................................................................................................32 Automatic traffic information reception ..................................................................................................33 En 3 INTRODUCTION Features and capabilities About this manual • This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority. • “cHDMI1” (example) indicates the name of the parts on the remote control. Refer to the “Part names and functions” (☞p. 5) for the information about each position of the parts. • J1 indicates that the reference is in the footnote. Refer to the corresponding numbers on the bottom of the page. • ☞ indicates the page describing the related information. • Click on the “ ” at the bottom of the page to display the corresponding page in “Part names and functions.” Front panel Rear panel Front panel display Remote control ■ Attaching the VIDEO AUX input cover (included) ■ Installing batteries in the remote control To protect against dust, attach the supplied VIDEO AUX input cover to the VIDEO AUX jacks when you do not use the jacks. To remove the cover, push the left section of it. When inserting batteries in the remote control, remove the battery compartment cover from the reverse side of the remote control, and insert two AAA batteries into the battery compartment so that they match with the polarity markings (+ and -). a Battery compartment cover c b Attach the cover Battery compartment Replace the batteries with new ones if the following symptoms become evident: • The remote control can only be operated within a narrow range. • bTRANSMIT does not light up, or only lights dimly. Supplied accessories PUSH Check that you received all of the following parts. NOTE • • • • • • If there are remote control codes for external components registered to the remote control, removing the batteries for more than two minutes, or leaving exhausted batteries in the remote control, the remote control codes may be cleared. If this should occur, replace the batteries with new ones, and set the remote control codes. Remote control Batteries (AAA, R03, UM-4) x 2 YPAO microphone AM loop antenna Indoor FM antenna VIDEO AUX input cover Remove the cover En 4 INTRODUCTION Part names and functions g AM Front panel h a A (Power) b c d e f Switches this unit between on and standby modes. YPAO MIC jack Connect the supplied YPAO microphone and adjust the speaker balance automatically (☞p. 21). INFO Changes the information shown on the front panel display (☞p. 7). MEMORY Registers FM/AM stations as preset stations (☞p. 31). J1 PRESET j / i Selects an FM/AM preset station (☞p. 32). J1 FM Sets the FM/AM tuner band to FM (☞p. 30). J1 a b i j k l m TONE CONTROL Sets the FM/AM tuner band to AM (☞p. 30). J1 TUNING jj / ii Changes FM/AM tuner frequencies (☞p. 30). J1 Front panel display Displays information on this unit (☞p. 7). PHONES jack For plugging headphones in. Sound effects applied during playback can also be heard through the headphones. INPUT l / h Selects an input source from which to playback. Press either the left or right key repeatedly to cycle through the input sources in order. SCENE Switches the input source and the sound field program with a single button (☞p. 26). Press this key when this unit is in standby mode to switch on the unit. c d e f g h INFO MEMORY PRESET FM AM TUNING n o p q Adjusts high-frequency/low-frequency output of speakers/headphones (☞p. 25). PROGRAM l / h Switches between the sound field effect (sound field program) you are using and the surround sound decoder (☞p. 26). Press either the left or right key repeatedly to cycle through the input sources in order. STRAIGHT Changes a sound field program to straight decoding mode (☞p. 27). VIDEO AUX jacks For connecting video cameras, game consoles, and portable music players to this unit temporarily. Attach the supplied VIDEO AUX input cover when not using this jack. VOLUME Adjusts the volume level. i YPAO MIC VOLUME SCENE BD DVD PHONES INPUT TONE CONTROL TV CD PROGRAM RADIO SILENT CINEMA j VIDEO AUX STRAIGHT PORTABLE k l m n o VIDEO p L AUDIO R q J 1 : Usable when you have selected tuner input. En 5 INTRODUCTION Part names and functions Rear panel d COMPONENT VIDEO jacks a HDMI OUT jack e b c For connecting an HDMI - compatible TV to output audio/video signals to (☞p. 13). HDMI1-4 jacks For connecting external components equipped with HDMIcompatible outputs to receive audio/video signals from (☞p. 15). ANTENNA jacks For connecting AM and FM antennas (☞p. 20). a f g b HDMI 3 HDMI 4 FM GND AM COMPONENT VIDEO PR PR PB PB j k l Distinguishing the input and output jacks The area around the audio/video output jacks is marked in white to prevent connection errors. Use these jacks to output audio/video signals to a TV or other external component. ANTENNA HDMI 2 HDMI 1 i For connecting a TV capable of receiving video input, and outputting video signals to it (☞p. 14). AUDIO OUT jacks For outputting audio signals received when analog inputs such as the AV5 or AUDIO1-2 jacks are selected (☞p. 19). SUBWOOFER jack For connecting a subwoofer with a built-in amplifier (☞p. 11). SPEAKER terminals For connecting the front, center, and surround speakers (☞p. 11). Power cord For connecting this unit to an AC wall outlet. c (BD/DVD) HDMI OUT h MONITOR OUT jack For connecting TV that are compatible with component video signals, using three cables to output video signal (☞p. 13). AV1-5 jacks For connecting to external devices equipped with audio/video outputs so that this unit can receive audio/video signals (☞p. 16, p. 17). AV OUT jacks For outputting audio/video signals received when analog inputs (AV35 or AUDIO1-2) are selected (☞p. 19). AUDIO1-2 jacks For connecting to external components equipped with analog audio outputs to input sound into this unit (☞p. 18). Output jacks SPEAKERS FRONT SURROUND Y MONITOR OUT Y COMPONENT VIDEO CENTER MONITOR OUT VIDEO ANTENNA (BD/DVD) HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 FM GND COMPONENT VIDEO PR PR PB PB SURROU Y MONITOR OUT OPTICAL AV 1 COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT Y COMPONENT VIDEO SUBWOOFER OPTICAL AV 1 d e f g MONITOR OUT VIDEO i hj k COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV 5 AV OUT SUBWOOFER AUDIO 1 AUDIO 2 l En 6 INTRODUCTION Part names and functions Front panel display g Cursor indicators a HDMI indicator h b c d e f Lights up during normal HDMI communication when any of the HDMI 1-4 inputs are selected. CINEMA DSP indicator Lights up when a sound field effect that uses CINEMA DSP technology is selected. Tuner indicator Lights up when receiving an FM/AM broadcast. SLEEP indicator Lights up when the sleep timer is activated (☞p. 8). MUTE indicator Flashes when audio is muted. VOLUME indicator Displays the current volume level. i ■ Changing the front panel display Light up if corresponding cursors on the remote control are available for operations. Multi information display Displays a range of information on menu items and settings. Speaker indicators Indicate speaker terminals from which signals are output. The front panel can display sound field programs and surround decoder names as well as the active input source. Press eINFO repeatedly to cycle through input source → sound field program → surround decoder in order. J1 Input source name Subwoofer Front speaker L Surround speaker L a L SL SW C Center speaker R SR HDMI1 Front speaker R Straight Surround speaker R L SL SW C R SR Sound field program (DSP program) b c d SLEEP STEREO TUNED e f VOL. MUTE L SL g VOL. h g SW C R SR i J 1 : While selecting a tuner input, the FM/AM frequency is displayed instead of the input source. En 7 INTRODUCTION Part names and functions a Remote control signal transmitter Remote control Transmits infrared signals. b TRANSMIT Lights up when a signal is output from the remote control. a c Input selector Sleep 120min. b RECEIVER SLEEP k HDMI 2 3 4 3 4 j AV 1 c 2 1 FM AM MEMORY PRESET F / G TUNING H / I TUNER FM AM e INFO MEMORY MOVIE MUSIC PRESET TUNING STEREO BD DVD TV SETUP CD ENTER Sleep 60min. l OPTION Displays the Option menu for each input source (☞p. 34). m VOLUME +/Adjusts the volume level (☞p. 25). n MUTE Turns the mute function of the sound output on and off (☞p. 25). f Sound selection keys RADIO l OPTION h i Sleep 30min. Cycles the information displayed on the front panel display (the name of the currently selected input source, the sound field program, the surround decoder, the FM/AM tuner frequency, etc.)(☞p. 7). STRAIGHT SCENE g Sets the FM/AM tuner band to FM. Sets the FM/AM tuner band to AM. Presets radio stations. Selects a preset station. Changes tuning frequencies. Sleep Off Sleep 90min. e INFO ENHANCER SUR. DECODE f HDMI1-4 jacks AV1-5 jacks AUDIO1-2 jacks Front panel VIDEO AUX jacks FM/AM tuner Operates the FM/AM tuner. These keys are used when using the tuner input. 2 V-AUX d HDMI1-4 AV1-5 AUDIO1-2 V-AUX TUNER d Tuner keys AUDIO 5 Sets this unit to place itself in standby mode automatically after a specified period of time has elapsed (sleep timer). Press this key repeatedly to set the time for the sleep timer function. The front panel display indicator lights up when the sleep timer is activated. Select an input source on this unit from which to playback. TRANSMIT 1 k SLEEP VOLUME m MUTE n RETURN Switch between the sound field effect (sound field program) you are using and the surround decoder (☞p. 26). g SCENE Switches the input source and the sound field program with a single button (☞p. 26). Press this key when this unit is in standby mode to switch on the unit. h SETUP Displays a detailed Setup menu for this unit (☞p. 36). i Cursor B / C / D / E, ENTER, RETURN Cursor B / C / D / E Select menu items and change settings when settings menus, etc are displayed. ENTER Confirms a selected item. RETURN Returns to the previous screen when setting menus are displayed, or ends the menu display. j RECEIVER A (RECEIVER Power) Switches this unit between on and standby modes. En 8 CONNECTIONS Connecting speakers This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and connections in your listening environment. ■ Surround left and right speakers Speaker channels and functions The surround speakers are for effect and vocal sounds with the 5.1-channel speakers providing reararea sounds. ■ Front left and right speakers The front speakers are used for the front channel sounds (stereo sound) and effect sounds. Ex. Ex. Front speaker layout: Place these speakers at an equal distance from the ideal listening position in the front of the room. When using a projector screen, the appropriate top positions of the speakers are about 1/4 of the screen from the bottom. ■ Center speaker Surround speaker layout: Place the speakers at the rear of the room on the left and right sides facing the listening position. They should be placed between 60 degrees and 80 degrees from the listening position and with the speaker tops at a height of 1.5 – 1.8 m from the floor. ■ Subwoofer The subwoofer speaker is used for bass sounds and low-frequency effect (LFE) sounds included in Dolby Digital and DTS. Use a subwoofer that is equipped with an internal amplifier. The center speaker is for the center channel sounds (dialog, vocals, etc.). Ex. Center speaker layout: Place it halfway between the left and right speakers. When using a TV, place the speaker just above or just under the center of the TV with the front surfaces of the TV and the speaker aligned. When using a screen, place it just under the center of the screen. Ex. Subwoofer speaker layout: Place it exterior to the front left and right speakers facing slightly inward to reduce echoes from the wall. En 9 CONNECTIONS Connecting speakers Speaker layout Connecting speakers 5.1-channel speaker layout (5 speakers + subwoofer) Connect your speakers to their respective terminals on the rear panel. Front speaker Front speaker R Surround speaker R R L L Front speaker L Subwoofer ANTENNA HDMI 4 FM GND AM SPEAKERS FRONT SURROUND CENTER OR OUT Surround speaker R AUDIO 2 60q 60q AUDIO OUT SUBWOOFER 80q 80q Center speaker Subwoofer Center speaker Surround speaker L CAUTION • Connect at least two speakers (front left and right). • If you cannot connect all five speakers, give priority to the surround speakers. • The surround speakers should be placed between 60 degrees and 80 degrees from the listening position. ■ CRT monitors We recommend that you use magnetically shielded speakers to avoid video distortion, especially for the front and center speakers near the screen. If your screen still gets interference from magnetically shielded speakers, move the speakers farther away from your TV. • Remove the AC power cord of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the “+” (positive, red) terminal on this unit and the speakers, and the other cable into the “-” (minus, black) terminal. • Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “CHECK SP WIRES!” will appear on the front panel display when this unit is switched on. En 10 CONNECTIONS Connecting speakers ■ Connecting front speakers KE RS 2 ■ Connecting center speakers / surround speakers 3 FR ON SU EA KE NT ER 1 3 4 2 3 4 SP ND CE T 1 1 RR OU ■ Connecting the subwoofer 2 Remove approximately 10mm of insulation from the ends of the speaker cables, and twist the bare wires of the cables together firmly so that they will not cause short circuits. Loosen the speaker terminals. Insert the bare wire of the speaker cable into the gap on the side of the terminal. 1 2 3 Press the tab on the speaker terminal down. Insert the speaker cable end into the terminal. Lift the tab to fix the speaker cable in place. 1 Connect the subwoofer input jack to the SUBWOOFER jack on this unit with an audio pin cable. 2 Set the subwoofer volume as follows. Volume: Set to approximately half volume (or slightly less than half). Crossover frequency (if available): Set to maximum. VOLUME CROSSOVER/ HIGH CUT Tighten the terminal. MIN Connecting the banana plug (Except U.K., Europe, Asia and Korea models) MAX MIN MAX Subwoofer examples Tighten the knob, and then insert the banana plug into the end of the terminal. KE RS FR ON T Banana plug En 11 CONNECTIONS Connecting external devices ■ Audio jacks Cable plugs and jacks The main unit is equipped with the following input/output jacks. Use jacks and cables appropriate for components that you are going to connect. ■ Audio/Video jacks OPTICAL jacks COAXIAL jacks These jacks transmit optical digital audio signals. Use fiber-optic cables for optical digital audio signals. These jacks transmit coaxial digital audio signals. Use pin cables for digital audio signals. HDMI jacks Digital audio fiber-optic cable Digital audio pin cable Digital video and digital sound are transmitted through a single jack. Only use an HDMI cable. HDMI cable • Use a 19-pin HDMI cable with the HDMI logo. • We recommend using a cable less than 5.0 m long to prevent signal quality degradation. PORTABLE jack These jacks transmit conventional analog audio signals. Use stereo pin cables, connecting the red plug to the red R jack, and the white plug to the white L jack. This jack transmits conventional analog audio signals. Use a stereo mini-plug cable when connecting. Stereo audio pin cable ■ Analog video jacks COMPONENT VIDEO jacks VIDEO jack The signal is separated into three components: luminance (Y), chrominance blue (PB), and chrominance red (PR). Use component video pin cables with three plugs. This jack transmits conventional analog video signals. Use video pin cables. Component video pin cable AUDIO jacks Stereo mini-plug cable Video pin cable En 12 CONNECTIONS Connecting external devices ■ Connecting an HDMI video monitor Connecting a TV monitor Connect the HDMI cable to the HDMI OUT jack. This unit is equipped with the following three types of output jack for connection to a TV. HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input signal format supported by your TV. HDMI OUT jack HDMI HDMI input (BD/DVD) HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 COMPONENT VIDEO PR PR PB PB HDMI HDMI Y COMPONENT VIDEO Y MONITOR OUT HDMI OUT (BD/DVD) HDMI 2 HDMI 1 HDMI 3 MONITOR OUT VIDEO HDMI 4 TV COMPONENT VIDEO PR PR PB PB OPTICAL AV 1 Y MONITOR OUT Y COMPONENT VIDEO VIDEO COMPONENT VIDEO jacks (MONITOR OUT) COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT MONITOR OUT • Use a 19-pin HDMI cable with the HDMI logo. • We recommend using a cable less than 5.0 m long to prevent signal quality degradation. VIDEO jack (MONITOR OUT) This unit will receive HDMI, component, or video signals in the same format as transmitted by the output devices. For example, these three output devices must be connected to the monitor by matching input/output jacks and cables, and then you must change the TV’s input mode to the proper setting. ■ Connecting a component video monitor Connect the component video cable to the COMPONENT VIDEO (MONITOR OUT) jacks. Component video input Input Output HDMI HDMI PR HDMI input COMPONENT VIDEO VIDEO COMPONENT VIDEO COMPONENT VIDEO TV PR Component video input VIDEO PB Y Video input (BD/DVD) HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 COMPONENT VIDEO MONITOR OUT PR PB Y PB PR Y PB Y COMPONENT VIDEO OPTICAL AV 1 MONITOR OUT VIDEO TV COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT En 13 CONNECTIONS Connecting external devices ■ Connecting a video monitor Connect the video pin cable to the VIDEO (MONITOR OUT) jack. Video input (BD/DVD) HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 COMPONENT VIDEO PR PR PB PB VIDEO V Y MONITOR OUT Y COMPONENT VIDEO MONITOR OUT VIDEO TV V OPTICAL AV 1 COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT ■ Listening to TV audio To transmit sound from the TV to this unit, connect its AV1-5 or AUDIO1-2 jacks to the TV’s AUDIO OUT jacks. If the TV supports optical digital audio output, we recommend that you connect the TV audio output to the receiver’s AV4 jack. Connecting to AV4 allows you to switch the input source to AV4 with just a single key operation using the SCENE function (☞p. 26). Audio output (Optical) (BD/DVD) HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 COMPONENT VIDEO OPTICAL PR PR PB PB O Y MONITOR OUT Y COMPONENT VIDEO MONITOR OUT VIDEO TV O OPTICAL COAXIAL COAXIAL OPTICAL (CD) AV 1 AV 2 AV 3 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT En 14 CONNECTIONS Connecting external devices TRANSMIT Connecting BD/DVD players and other devices RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 This unit has the following input jacks. Connect them to the appropriate output jacks on the external components. AV AUDIO 5 1 2 Input jack V-AUX TUNER FM AM INFO MEMORY PRESET TUNING ENHANCER SUR. DECODE MOVIE MUSIC SETUP CD HDMI HDMI HDMI2 HDMI HDMI HDMI3 HDMI HDMI HDMI/Audio (Optical) output HDMI HDMI OUT (BD/DVD) HDMI 2 HDMI 3 HDMI 4 COMPONENT VIDEO HDMI PR PR PB PB HDMI HDMI HDMI AV1 Component video Optical AV2 Component video Coaxial digital AV3 Video Coaxial digital AV4 Video Optical AV5 Video Analog (Stereo) AUDIO1 --- Analog (Stereo) AUDIO2 --- Analog (Stereo) VIDEO AUX Video Analog (Stereo) Y COMPONENT VIDEO Y OPTICAL MONITOR OUT MONITOR OUT VIDEO O RADIO OPTION ENTER Audio input HDMI1 HDMI4 SCENE TV Video input This unit can use the AV1-5 or AUDIO1-2 input jacks to receive audio signals from other audio input sources. For example, if an external device cannot produce audio signals from an HDMI jack, use the following method to change the audio input. STEREO STRAIGHT BD DVD ■ Receiving audio from other input sources c l VOLUME i O OPTICAL COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT BD/DVD player RETURN 1 2 3 4 MUTE ■ Connecting BD/DVD players and other devices with HDMI Connect the device with an HDMI cable to one of the HDMI1-4 jacks. Select the HDMI input (HDMI1-4) that the external device is connected to for playback. Use the cInput selector to select the desired HDMI input source. Press lOPTION to display the Option menu. J1 Press iCursor C until “Audio In” is displayed, and then press iENTER. Press iCursor D / E to select the audio input source. HDMI1 c Input selector i Cursor C / D / E i ENTER l OPTION VOL. Audio;;;;;;AV1 SW C R SR If you have selected AV1 input audio (optical digital) (BD/DVD) HDMI OUT L SL COMPONENT VIDEO HDMI HDMI output PR PR PB PB Y HDMI MONITOR OUT 5 Y COMPONENT VIDEO Once you have completed the setup, press lOPTION to close the Option menu. MONITOR OUT VIDEO HDMI OPTICAL AV 1 BD/DVD player COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT J 1 : See the section on “Configuring the settings specific for each input source (Option menu)” for details on the Option menu (☞p. 34). En 15 CONNECTIONS Connecting external devices ■ Connecting BD/DVD players and other devices with component cables ■ Component connections to analog audio output devices Connect the device with a component video cable to one of the AV1-2 input jacks. Component video / Audio output Using optical digital audio output sources Select the AV1 input that the external device is connected to for playback. COMPONENT VIDEO PR Component video / Audio (Optical) output PB Y PR AUDIO COMPONENT VIDEO PB L Y (BD/DVD) HDMI OUT PR HDMI 2 HDMI 1 HDMI 3 MONITOR OUT HDMI 4 R COMPONENT VIDEO PR PB (BD/DVD) HDMI OUT PR HDMI 3 HDMI 4 PB Y PR PB Y COMPONENT VIDEO MONITOR OUT VIDEO L PR PR R OPTICAL PB Y Y PB AV 1 COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV OUT AUDIO 1 AUDIO OUT AUDIO 2 PB Y Y COMPONENT VIDEO MONITOR OUT OPTICAL HDMI 2 HDMI 1 COMPONENT VIDEO MONITOR OUT VIDEO O Game console O OPTICAL AV 1 COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT BD/DVD player Using coaxial digital audio output sources Select the AV2 input that the external device is connected to for playback. Component video / Audio (Coaxial) output You can use the video input from the AV1-2 jacks in combination with the audio input from other AV inputs or AUDIO1-2. When connecting these devices, select the AV3-5 or the AUDIO1-2 jacks as the audio input for AV1 or AV2. See “Receiving audio from other input sources” (☞p. 15) for detailed setup guidance. Select the AV input source (AV1-2) that is connected by component video cable to the external device for playback. AV1 VOL. Audio;;;AUDIO1 COMPONENT VIDEO PR SW C R SR (BD/DVD) HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 COMPONENT VIDEO PR PB PR PR Y PB PB Y COAXIAL L SL MONITOR OUT PB Y Y COMPONENT VIDEO MONITOR OUT VIDEO C C OPTICAL AV 1 COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT BD/DVD player En 16 CONNECTIONS Connecting external devices ■ Connecting BD/DVD players and other devices with video cables Connect the external device with a video pin cable to one of the AV3-5 input jacks. Using analog stereo audio output sources Select the AV5 input that the external device is connected to for playback. Using optical digital audio output sources Select the AV4 input that the external device is connected to for playback. Video / Audio output (BD/DVD) HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 COMPONENT VIDEO VIDEO PR PR PB PB V (BD/DVD) HDMI OUT Video / Audio (Optical) output HDMI 3 HDMI 4 COMPONENT VIDEO VIDEO AUDIO PR PR PB PB Y MONITOR OUT L V Y COMPONENT VIDEO R V Y MONITOR OUT MONITOR OUT VIDEO L V OPTICAL HDMI 2 HDMI 1 Y COMPONENT VIDEO R OPTICAL MONITOR OUT VIDEO AV 1 COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT O O OPTICAL AV 1 COAXIAL AV 2 COAXIAL OPTICAL (CD) TV AV 3 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT BD/DVD player BD/DVD player Using coaxial digital audio output sources Select the AV3 input that the external device is connected to for playback. (BD/DVD) HDMI OUT Video / Audio (Coaxial) output VIDEO V HDMI 2 HDMI 1 HDMI 3 HDMI 4 COMPONENT VIDEO PR PR PB PB Y MONITOR OUT Y COMPONENT VIDEO V MONITOR OUT VIDEO COAXIAL C C OPTICAL COAXIAL COAXIAL (CD) AV 1 AV 2 OPTICAL ( TV ) AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT BD/DVD player En 17 CONNECTIONS Connecting external devices ■ Connecting CD players and other audio devices Using coaxial digital output sources Select the AV input (AV2 or AV3) that the external device is connected to for playback. Using analog stereo output sources Select the audio input (AUDIO1-2) that the external device is connected to for playback. (BD/DVD) HDMI OUT HDMI 2 HDMI 1 HDMI 3 HDMI 4 COMPONENT VIDEO (BD/DVD) HDMI OUT HDMI 2 HDMI 1 HDMI 3 PR PR PB PB HDMI 4 COMPONENT VIDEO Audio output PR Audio (Coaxial) output PR Y PB MONITOR OUT PB AUDIO Y COMPONENT VIDEO L Y MONITOR OUT Y COMPONENT VIDEO C C MONITOR OUT VIDEO R MONITOR OUT VIDEO COAXIAL L OPTICAL COAXIAL COAXIAL (CD) AV 1 OPTICAL ( TV ) AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT R OPTICAL AV 1 COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT CD player CD player We recommend connecting audio devices with an coaxial digital output to the AV3 coaxial digital jack on this unit. This connection allows you to switch to the AV input 3 just by pressing the “CD” SCENE key (☞p. 26). Using optical digital output sources Select the AV input (AV1 or AV4) that the external device is connected to for playback. HDMI OUT (BD/DVD) HDMI 2 HDMI 1 HDMI 3 HDMI 4 COMPONENT VIDEO PR PR PB PB Audio (Optical) output Y MONITOR OUT Y COMPONENT VIDEO MONITOR OUT VIDEO OPTICAL O O OPTICAL COAXIAL AV 2 COAXIAL OPTICAL (CD) TV AV 3 AV 5 AV OUT AUDIO 1 AUDIO 2 AUDIO OUT CD player En 18 CONNECTIONS Connecting external devices Connecting video cameras and portable audio players Transmitting input A/V to external devices Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, game consoles, or portable audio devices to the receiver. Select the V-AUX input to use these connected devices. This receiver can transmit selected incoming analog audio/video signals to external devices through the AV OUT and AUDIO OUT jacks. You can record these input audio and video signals to VCRs or similar devices, or send them to other TVs or external devices. Video / Audio input RADIO VIDEO VIDEO AUX STRAIGHT V PORTABLE VIDEO V L L AUDIO R AUDIO R L AUDIO AUDIO OUT R L (BD/DVD) HDMI OUT Audio output Audio output HDMI 2 HDMI 1 HDMI 3 HDMI 4 COMPONENT VIDEO R PR PR PB PB VIDEO V Video output VCR V Y MONITOR OUT Y COMPONENT VIDEO MONITOR OUT VIDEO L R OPTICAL AV 1 COAXIAL AV 2 COAXIAL OPTICAL (CD) ( TV ) AV 3 AV 4 Audio input L AV 5 AUDIO R AV OUT AUDIO 1 AUDIO 2 AUDIO OUT L R Portable audio player Video cameras • Be sure to turn down the volume when connecting this unit and the other devices. • When external components are connected to both the PORTABLE jack and the AUDIO jacks, the sound output from the PORTABLE jack is transmitted. Audio recorder Using the AV OUT jacks Connect this jacks to the external device’s video input jack and analog audio input jacks. Using the AUDIO OUT jacks Connect this jack to the external device’s analog audio input jacks. HDMI audio/video signals, component video signals, and digital audio signals cannot be transmitted from these jacks. En 19 CONNECTIONS Connecting the FM/AM antennas An indoor FM antenna and an AM loop antenna are included with this receiver. Connect these antennas properly to their respective jacks. AM loop antenna Position the AM antenna away from the receiver. The wires of the AM antenna have no polarity. You can connect either wire to the AM jack or the GND jack. Indoor FM antenna HDMI 3 HDMI 4 FM GND AM SPEAKERS FRONT SURROUND CENTER MONITOR OUT Connecting the AM loop antenna Press and hold Insert Release ■ Improving FM reception We recommend using an outdoor antenna. For more information, consult the nearest authorized dealer. ■ Improving AM reception Connect this unit to an outdoor antenna with a 5-10 m vinyl-coated wire. Make sure the AM loop antenna is still connected. Connecting the GND jack can reduce noise. Connect the jack to a store-bought ground bar or copper plate with a vinyl-covered wire and bury this new attachment in moist ground. The GND jack is not to be connected to the ground socket of an electrical outlet. En 20 CONNECTIONS Set up the speaker parameters automatically (YPAO) This unit is equipped with a YPAO (Yamaha Parametric Room Acoustic Optimizer) that adjusts the status, size, and volume balance of the speakers in order to provide an optimal sound field. Using YPAO allows you to automatically configure settings for which specialist knowledge is usually needed, such as adjusting speaker output and acoustic parameters to suit your listening room (the room in which this unit is placed). J1 When you use YPAO, a test tone will be output from the speakers for approximately three minutes and acoustic measuring will be performed. When using YPAO, be careful of the following. 2 4 Connect the YPAO microphone to the YPAO MIC jack on the front panel. Face the head of the YPAO microphone upwards. • The test tone is output at high volume. Please refrain from using this function at night when it may be a nuisance to others nearby. • Please take care that the test tone does not frighten any small children. 1 Place the supplied YPAO microphone at ear height in your listening position. YPAO microphone YPAO MIC INFO Check the following before using YPAO. This unit • The headphones are removed. Subwoofer • The power is turned on. • Volume is set to approximately half, and the cross-over frequency (if present) is set to maximum. VOLUME When positioning the microphone, we recommend that you use equipment that allows you to adjust the height (such as a tripod) as a microphone stand. When using a tripod, use the tripod screws to fix the microphone in place. MAX YPAO VOL. Press[SETUP] L SL SW C R SR CROSSOVER/ HIGH CUT 3 MIN “MIC ON. YPAO START” appears on the front panel display, and then changes to display the following. J2 MIN Switch this unit on. Continues to the next page MAX Subwoofer examples J 1 : When you have changed the number of speakers or the locations in which they are installed, first use YPAO to adjust the speaker balance. J 2 : To cancel measurement, disconnect the YPAO microphone. En 21 CONNECTIONS Set up the speaker parameters automatically (YPAO) TRANSMIT RECEIVER This completes preparations. To achieve more accurate results, be careful of the following when measuring. SLEEP HDMI 1 2 1 2 3 4 3 4 AV • Measuring will take approximately three minutes. Keep the room as quiet as possible during measurement. • Wait in the corner of the listening room during measurement or leave it entirely, to avoid becoming an obstruction between the speakers and the YPAO microphone. AUDIO 5 1 2 V-AUX TUNER FM AM INFO MEMORY MOVIE MUSIC PRESET 6 TUNING ENHANCER SUR. DECODE STEREO STRAIGHT SCENE BD DVD TV SETUP RADIO h VOLUME i CD OPTION ENTER 5 Press hSETUP to start measurement. YPAO YPAO Set>Cancel VOL. Progress00% L SL SW C R SR VOL. L SL SW C R SR 7 Remove the YPAO microphone. YPAO finishes automatically when the YPAO microphone is removed. VOL. YPAOComplete L SL SW C R SR NOTE h SETUP i Cursor C / D / E i ENTER SW C R SR The following display appears if measurement finishes without any problems. YPAO L SL You can use the following method to cancel measurement results if you want to redo the measuring. Press iCursor C to switch to the following display, the use iCursor D / E to select “Cancel” and press iENTER. After this operation, use the same procedure to carry out YPAO again. Display during measurement YPAO VOL. Disconnect MIC RETURN MUTE Press iENTER to apply the results of measurement. When a problem occurs, an error message or report appears either during or after measurement. Use the following page as a reference to solve the problem, and carry out YPAO again. The YPAO microphone is sensitive to heat. When you have finished measuring, store the microphone out of direct sunlight, and away from locations that may experience high temperatures, such as on top of AV equipment. En 22 CONNECTIONS Set up the speaker parameters automatically (YPAO) TRANSMIT ■ When an error message appears RECEIVER SLEEP 1 2 3 4 3 4 Check the content of the message from the list of messages (☞p. 24) to resolve the problem, and carry out the measurement process again. AV 1 2 AUDIO 5 1 2 V-AUX YPAO TUNER FM INFO MEMORY MOVIE MUSIC VOL. E-9:CANCEL AM PRESET When “E-5” to “E-9” is displayed: during measurement HDMI TUNING ENHANCER SUR. DECODE Error message (example) STEREO after measurement 1 2 3 Check that the environment is suitable for accurate measurement. Press iENTER to switch the display. SCENE TV SETUP CD RADIO OPTION ENTER VOLUME RETURN MUTE i Check the error code that appears in the display, and carry out YPAO again by performing the following steps. When “E-10” is displayed: When “E-1” or “E-2” is displayed: 1 2 3 4 1 2 3 4 Press iENTER once, and then press iCursor E to select “Exit.” Press iENTER to finish YPAO, and set the unit to standby mode. Check that the speakers are properly connected. Turn on the unit, and then carry out YPAO again. Check the content of the message from the list of messages (☞p. 24) to resolve the problem. You can confirm the speaker that has the problem when that speaker’s indicator lights up. NOTE Check that “Retry” is selected, and then press iENTER to carry out YPAO again. STRAIGHT BD DVD ■ When a warning message appears Press iENTER once, and then press iCursor E to select “Exit.” Press iENTER to finish YPAO. Although you can apply the results of measurement when a warning message appears, doing so will not provide optimal sound. We recommend you resolve the problem and then carry out YPAO again. YPAO W-3:LEVEL Warning message (example) Switch the unit to standby mode. VOL. SL SR Speaker that has a problem. When multiple warning messages appear: Use iCursor D / E to display other warning messages. Turn on the unit again, and then carry out YPAO. When applying the results of measurement: Press iENTER to switch display, the use iCursor D / E to select “Set” and press iENTER. When cancelling YPAO: Press iENTER to switch display, the use iCursor D / E to select “Cancel” and press iENTER. i Cursor D / E i ENTER En 23 CONNECTIONS Set up the speaker parameters automatically (YPAO) ■ Message list E-5:NOISY NOTE If the following messages appear, resolve the problems that have occurred and carry out the measurement process again. The noise is too loud, preventing accurate measurements from being taken. ■ When a warning message appears before measurement Connect MIC! The YPAO microphone is not connected. Connect the YPAO microphone to the YPAO MIC jack on the front panel. Unplug HP! The headphones are connected. Remove the headphones. Memory Guard! The settings of this unit are protected. Set “Memory Guard” in the Setup menu to “Off.” E-7:NO MIC The YPAO microphone has been removed. While measuring, take care not to touch the YPAO microphone. E-8:NO SIGNAL The YPAO microphone could not distinguish a test tone. Check that the YPAO microphone has been installed correctly. ■ Error message E-1:FRONT SP The unit was not able to find the front channel. Check that the left and right front speakers are connected correctly. E-2:SUR. SP The unit was only able to find one of side of the surround channels. Check that the left and right front surround speakers are connected correctly. Measure again in quiet surroundings. Turn off any devices in the room that may be emitting noise, or place them further away from the YPAO microphone. When this message is displayed, selecting “Proceed” will allow you to continue measuring. However, we recommend resolving the problem and measuring again, as continuing measurement without doing so will not give accurate results. Check that each speaker has been connected and installed correctly. The YPAO microphone or the YPAO MIC jack may be broken. Inquire at the retailer where you purchased this unit, or the nearest Yamaha service center. E-9:CANCEL E-10:INTERNAL You have carried out an operation that has cancelled the measuring process. Carry out the measuring process again. Do not operate this unit by, for example, adjusting the volume. An internal error has occurred. Carry out the measuring process again. Contact a Yamaha service center if “E-10” appears again. ■ Warning message W-1:PHASE The speakers displayed are connected with the opposite polarity. Depending on the type of speakers you are using and the environment in which you have them installed, this message may occur even if the speakers are connected correctly. Depending on the type of speakers, “W-1” may display even if the speakers are connected correctly. W-2:OVER 24m (80ft) The speakers displayed are separated from the listening position by more than 24m, and cannot be adjusted correctly. Install the speakers with 24m of the listening point. W-3:LEVEL The difference each channel is too loud or too low, and cannot be adjusted correctly. Check that all speakers are installed in the same surroundings. Check that the speaker polarity + (plus), and (minus) are correct. If these are connected correctly, you can use the speakers normally even this message appears. Check that the speaker polarity + (plus), and (minus) are correct. We recommend the same speakers or speakers with as similar specifications as possible. Adjust the volume of the subwoofer. If “W-2” or “W-3” appears, you can apply measurement results, but they will not give optimal results. We recommend that you resolve the problem and carry out the measurement process again. En 24 PLAYBACK TRANSMIT Basic playback procedure RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 1 2 c V-AUX TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC 1 2 Turn on external components (TV, DVD player, etc.) connected to this unit. Turn on this unit and select the input source using cInput selector. The name of the selected input source is displayed for a few seconds. J1 TUNING Adjusting high/low-frequency sound (Tone control) You can adjust the balance of the high-frequency range (Treble) and low-frequency range (Bass) of sounds output from the front left and right speakers to obtain desired tone. 2 Press PROGRAM l / h to adjust the output level in those frequency ranges. Adjustable range -10.0 dB to +10.0 dB Adjustment increments 2.0 dB ENHANCER SUR. DECODE STEREO STRAIGHT 3 SCENE BD DVD TV SETUP CD RADIO OPTION ENTER Play the external component that you have selected as the source input, or select a radio station on the tuner. VOLUME m Refer to the instruction manuals provided with the external component for details on playback. MUTE n For details on how to tune in to FM/AM stations, refer to “FM/AM tuning” (☞p. 30). RETURN The tone control of the speakers or headphones can be set separately. Set the headphone tone control with the headphones connected. 1 The display returns to the previous display soon after you release the key. If you set the balance extremely off, sounds may not match those from other channels well. Press TONE CONTROL on the front panel repeatedly to select “Treble” or “Bass.” TONE CONTROL 4 Press mVOLUME +/- to adjust the volume. YPAO MIC INFO MEMORY PRESET FM To mute the output. Press nMUTE to mute the audio output. Press nMUTE again to unmute. AM SCENE BD DVD PHONES INPUT TONE CONTROL TV CD RADIO STRAIGHT PROGRAM SILENT CINEMA PROGRAM l / h The current setting is displayed on the front panel display. c Input selector m VOLUME +/n MUTE TONE Treble VOL. 0.0dB L SL SW C R SR J 1 : You can change the input source name displayed on the front panel display as necessary (☞p. 42). En 25 PLAYBACK Changing input settings with a single key (SCENE function) TRANSMIT RECEIVER SLEEP This unit has a SCENE function that allows you to turn the power on and change input sources and sound field programs with one key. HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 1 2 PRESET TUNING V-AUX TUNER FM AM INFO MEMORY Four scenes are available for different uses, such as c playing movies or music. The following input sources and sound field programs are provided as the initial factory settings. SCENE Input Sound field program BD/DVD HDMI1 Straight TV AV4 Straight CD AV3 Straight RADIO TUNER 5ch Enhancer ENHANCER SUR. DECODE MOVIE MUSIC STEREO f STRAIGHT SCENE BD DVD TV SETUP CD RADIO OPTION ENTER g Registering input sources/sound field program 1 2 Use cInput selector to select the input source you want to register. Use the fSound selection keys to select the sound field program you want to register. 3 Press the gSCENE key until “SET Complete” appears on the front panel display. SCENE1 VOL. SET Complete L SL SW C R SR Release the key when “SET Complete” is displayed. VOLUME RETURN Enjoying sound field programs MUTE This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel playback for almost any sound source using various sound field programs stored on the chip, and a range of sound decoders. Selecting sound field programs and sound decoders c Input selector f Sound selection keys f MOVIE f MUSIC f STEREO f SUR. DECODE f STRAIGHT g SCENE This unit offers sound field settings (sound field programs) in many different categories suitable for movies, music and other uses. Choose a sound field program that sounds best with the source you are playing back, rather than relying on the name or explanation of the program. • Sound field programs are stored for each input source. When you change the input source, the sound field program previously selected for that input source is applied again. • If the sampling frequency of an input source is higher than 96 kHz, this unit does not apply any sound field programs. Selects sound field program: MOVIE category: Press fMOVIE repeatedly MUSIC category: Press fMUSIC repeatedly Selects stereo reproduction: Press fSTEREO repeatedly Selects compressed music enhancer: Press fSTEREO repeatedly Selects surround decoder: Press fSUR. DECODE repeatedly Switches Straight decoding mode (☞p. 27): Press fSTRAIGHT Sound field program categories MOVIE VOL. Sci-Fi L SL SW C R SR Program • You can use the speaker indicators on the front panel display to check what speakers are currently outputting sound (☞p. 7). • You can adjust sound field elements (sound field parameters) for each of the programs. En 26 PLAYBACK Enjoying sound field programs TRANSMIT RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 1 2 ■ Enjoying unprocessed playback ■ Enjoying stereo playback (Straight decoding mode) Use straight decoding mode when you want to playback sound without sound field processing. You can playback as follows in straight decoding mode. V-AUX 2-channel sources such as CD TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC TUNING ENHANCER SUR. DECODE STEREO STRAIGHT SCENE BD DVD TV SETUP CD RADIO OPTION ENTER VOLUME RETURN Stereo sound plays through the front left and right speakers. Select “2ch Stereo” from the surround field programs when you want to playback 2-channel stereo sound (from the front speakers only), regardless of the playback source. Selecting “2ch Stereo” will playback as follows for the playback of CD and BD/DVD sources. 2-channel sources such as CD Multi-channel playback sources such as BD/ f DVD Plays back audio from a playback source without applying sound field effects, using an appropriate decoder to split the signal into multiple channels. 1 ■ Enjoying sound field programs Stereo sound plays back through the front speakers. Multi-channel sources such as BD/DVD Playback channels other than the front channels in the playback source are mixed with the front channels and played back through the front speakers. Press fSTRAIGHT to activate the straight decoding mode. 1 Press fSTEREO repeatedly to select “2ch Stereo.” without surround sound speakers This unit allows you to use virtual surround speakers to enjoy sound field surround effects, even without any surround speakers (Virtual CINEMA DSP mode). You can even enjoy surround sound presence with just a minimal configuration of the front speakers only. This unit will switch to Virtual CINEMA DSP mode automatically when surround speakers are unavailable. J1 ■ Enjoying sound field programs with headphones Even when headphones are connected, you can enjoy the reproduction sound field presence with ease (SILENT CINEMA mode). J2 MUTE STEREO VOL. Straight 2 Sci-Fi VOL. L SL SW C R SR Previously selected program J 1 : However, Virtual CINEMA DSP mode is not available in the following conditions: • When headphones are connected to this unit. • When a “2ch Stereo” sound field program is selected. • When straight decoding mode is selected. VOL. SW 2ch Stereo R SR Press fSTRAIGHT again to exit straight decoding mode. MOVIE f Sound selection keys f STRAIGHT f STEREO L SL SW C 2 R L To deactivate stereo playback, press any of the fSound selection keys to select a sound field program other than “2ch Stereo.” MUSIC Hall in Vienna VOL. L SL SW C R SR J 2 : However, SILENT CINEMA mode is not available in the following conditions: • When a “2ch Stereo” sound field program is selected. • When straight decoding mode is selected. En 27 PLAYBACK Enjoying sound field programs Sound field programs Action Game This sound field is suitable for action games such as car racing and FPS games. It uses reflection data that limits the effects range per channel in order to offer a powerful playing environment that makes the listener feel as if they are right there by enhancing various effects tones while maintaining a clear sense of directions. Roleplaying Game This sound field is suitable for role-playing and adventure games. It combines the sound field effects for movies and the sound field designs for “Action Game” to represent the depth and 3D feeling of the field during play, while offering movie-like surround effects in the movie scenes in the game. in the table indicates the sound field program for CINEMA DSP. ■ Category: MOVIE Sound field programs optimized for viewing video sources such as movies, TV programs, and games. Standard This program creates a sound field emphasizing the surround feeling without disturbing the original acoustic positioning of multi-channel audio such as Dolby Digital and DTS. It has been designed with the concept of an ideal movie theater, in which the audience is surrounded by beautiful reverberations from the left, right and rear. Spectacle This program represents the spectacular feeling of large-scale movie productions. It reproduces a broad theater sound field that matches cinemascope and wider-screen movies with an excellent dynamic range providing everything from very small sound effects to large, impressive sounds. Sci-Fi This program clearly reproduces the finely elaborated sound design of the latest science fiction and special effects-featuring movies. You can enjoy a variety of cinematographically created virtual spaces reproduced with clear separation between dialog, sound effects and background music. Adventure This program is ideal for precisely reproducing the sound design of action and adventure movies. The sound field restrains reverberations but puts emphasis on reproducing a powerful space expanded widely to the left and right. The reproduced depth is also restrained relatively to ensure the separation between audio channels and the clarity of the sound. Drama This sound field features stable reverberations that match a wide range of movie genres from serious dramas to musicals and comedies. The reverberations are modest but offer an optimum 3D feeling, reproducing effects tones and background music softly but cubically around clear words and center positioning in a way that does not fatigue the listener even after long hours of viewing. Mono Movie This program is provided for reproducing monaural video sources such as a classic movie in an atmosphere of a good old movie theater. The program produces the optimum expansion and reverberation to the original audio to create a comfortable space with a certain sound depth. Sports This program allows the listeners to enjoy stereo sport broadcasts and studio variety programs with enriched live feeling. In sports broadcasts, the voices of the commentator and sportscaster are positioned clearly at the center while the atmosphere of the stadium expands in an optimal space to offer the listeners a feeling of presence in the stadium. ■ Category: MUSIC This sound field is suitable when listening to music sources such as CDs. Hall in Munich This sound field simulates a concert hall with approximately 2500 seats in Munich, using stylish wood for the interior finishing as normal standards for European concert halls. Fine, beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena. Hall in Vienna This is an approximately 1700-seat, middle-sized concert hall with a shoebox shape that is traditional in Vienna. Pillars and ornate carvings create extremely complex reflections from all around the audience, producing a very full, rich sound. Chamber This program creates a relatively wide space with a high ceiling like an audience hall in a palace. It offers pleasant reverberations that are suitable for courtly music and chamber music. Cellar Club This program simulates a live house with a low ceiling and homey atmosphere. A realistic, live sound field features powerful sound as if the listener is in a row in front of a small stage. The Roxy Theatre This is the sound field of a rock music live house in Los Angeles, with approximately 460 seats. The listener’s virtual seat is at the center left of the hall. The Bottom Line This is the sound field at stage front in The Bottom Line, a famous New York jazz club once. The floor can seat 300 people to the left and right in a sound field offering real and vibrant sound. Music Video This sound field offers an image of a concert hall for live performance of pop, rock and jazz music. The listener can indulge oneself in a hot live space thanks to the presence sound field that emphasizes the vividness of vocals and solo play and the beat of rhythm instruments, and to the surround sound field that reproduces the space of a big live hall. En 28 PLAYBACK Enjoying sound field programs ■ Category: STEREO Suitable for listening to stereo sources. 2ch Stereo Use this program to mix down multi-channel sources to 2 channels. When multi-channel signals are input, they are down mixed to 2 channels and output from the front left and right speakers. 5ch Stereo Use this program to output sound from all speakers. When you play back multi-channel sources, this unit down-mixes the source to 2 channels, and then outputs the sound from all speakers. This program creates a larger sound field and is ideal for background music at parties, etc. ■ Category: ENHNCR (Compressed music enhancer) Suitable for listening to compressed audio, such as MP3. Straight Enhancer Use this program to restore the original depth and dynamics of 2-channel or multi-channel to compression audio. 5ch Enhancer Use this program to play back compression artifacts in 5-channel stereo. ■ Category: SUR.DEC (Surround decode mode) Select this program to playback sources with selected decoders. You can playback 2-channel sources as 5.1-channel sound. q Pro Logic A Dolby Pro Logic decoder. Suitable for any source. q PLII Movie A Dolby Pro Logic II decoder. Suitable for viewing any movie. q PLII Music A Dolby Pro Logic II decoder. Suitable for listening to music. q PLII Game A Dolby Pro Logic II decoder. Suitable for playing games. En 29 PLAYBACK FM/AM tuning TRANSMIT RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 1 2 When using the FM/AM tuner, adjust the direction of the FM/AM antenna connected to this unit to get the best reception. Selecting a frequency for reception (Normal tuning) V-AUX c The FM/AM tuner of this unit provides the following two modes for tuning. TUNER FM AM PRESET INFO TUNING Normal tuning MEMORY ENHANCER SUR. DECODE MOVIE MUSIC STEREO STRAIGHT SCENE BD DVD TV SETUP CD RADIO OPTION ENTER VOLUME d You can tune in to a desired FM/AM station by searching or specifying its frequency. 1 2 Press dFM or dAM to select a band to receive. VOL. FM87.50MHz 3 RETURN MUTE When you are receiving an FM broadcast and cannot obtain a stable stereo broadcast, you can force this unit to receive in a monaural mode. Press cTUNER to switch to the tuner input. Preset tuning (☞p. 31) You can preset the frequencies of FM/AM stations by l registering them to specific numbers, and later just select i those numbers to tune in. ■ When signal reception is poor L SL SW C R SR 1 2 3 c TUNER d FM d AM d TUNING H / I i Cursor B / C / D / E i ENTER l OPTION Lights up when receiving a stereo broadcast Use iCursor B / C to select “FM Mode.” VOL. FMMode 4 Press iENTER and use the iCursor D / E to select “Mono.” 9850 dTUNING I Decreases the frequency. Press and hold this key for longer than a second to search automatically for a station on a lower frequency than the current one. J1 Lights up when receiving a broadcast from a station Press lOPTION to display the Option menu. J2 OPTION Use dTUNING H / I to set a frequency to receive. dTUNING H Increases the frequency. Press and hold this key for longer than a second to search automatically for a station on a higher frequency than the current one. J1 Press cTUNER to switch to the tuner input. VOL. FMMode:Mono 5 When setting is completed, press lOPTION to close the Option menu. To return this unit to its original settings, use the same procedure to return the settings to “Stereo.” VOL. STEREO TUNED FM98.50MHz L SL SW C R SR J 1 : When searching for a station, release the key once the search has started. J 2 : See the section on “Configuring the settings specific for each input source (Option menu)” for details on the Option menu (☞p. 34). En 30 PLAYBACK FM/AM tuning TRANSMIT Registering and recalling a frequency (Preset tuning) RECEIVER SLEEP HDMI 1 2 3 4 3 4 4 AV 1 2 AUDIO 5 1 2 V-AUX TUNER FM AM INFO MEMORY PRESET MUSIC ■ Presetting FM stations TUNING ENHANCER SUR. DECODE MOVIE You can register up to 40 FM/AM stations as preset stations. There are two methods of presetting stations, “Auto Preset” and “Manual Preset.” Use one of these c methods to register stations. STEREO d The tuner detects FM stations with strong signals and registers up to 40 automatically. STRAIGHT SCENE BD DVD TV SETUP CD RADIO OPTION ENTER automatically (Auto Preset) l VOLUME AM stations cannot be automatically registered. Use manual station preset. Press iENTER, then press dPRESET F / G or iCursor B / C to choose the present number from which to start the Auto Preset function. Auto Preset will begin approximately 5 seconds after you select a preset number. If you do not select a preset number, Auto Preset will begin approximately 5 seconds after “READY” is displayed. Selecting a preset number Status Frequency READY L SL SW C R SR RETURN MUTE 1 2 3 Press cTUNER to switch to the tuner input. Preset number Select stations by hand and register them as presets individually. 1 Tune in to the station you wish to register, referring to “Selecting a frequency for reception (Normal tuning)” (☞p. 30). 2 Use one of the following methods to register the station you are currently receiving. Press dMEMORY for 2 seconds or longer. The station will be registered automatically to the lowest open preset number (or the next number after the one registered most recently). MEMORY To cancel registration, press iRETURN. Press lOPTION to display the Option menu. J1 (Manual Preset) ■ Registering to a preset number to which no station is registered VOL. 01:FM87.50MHz i ■ Registering stations manually VOL. STEREO TUNED 01:FM98.50MHz L SL SW C R SR During Auto Preset Use iCursor B / C to select “Auto Preset.” OPTION Auto Preset VOL. L SL SW C Search Preset for stations SEARCH MEMORY Registered frequencies R SR c TUNER d MEMORY d PRESET F / G i Cursor B / C i ENTER i RETURN l OPTION When Auto Preset is complete FINISH Auto Preset VOL. L SL SW C R SR The Option menu closes automatically when presetting is complete. J2 J 1 : See the section on “Configuring the settings specific for each input source (Option menu)” for details on the Option menu (☞p. 34). J 2 : The preset with the lowest preset number will be selected automatically immediately after presetting. En 31 PLAYBACK FM/AM tuning TRANSMIT ■ Designating a preset number for registration RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 Press dMEMORY once, to display “Manual Preset” on the front panel display. After a small wait, the preset number that the station has been registered to will appear. AV AUDIO 5 1 2 V-AUX c TUNER FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING Clearing preset stations d Preset number The newly registered frequency 9850 ENHANCER SUR. DECODE STEREO VOL. 01:Empty STRAIGHT L SL SW C R SR SCENE BD DVD TV SETUP CD ENTER l VOLUME RETURN MUTE Press cTUNER to switch to the tuner input. Press lOPTION to display the Option menu. J2 Use iCursor B / C to display “Clear Preset” and press iENTER. Blinks ■ Displaying the Radio Data System Empty, or the frequency registered most previously. information CLEAR i Press dPRESET F / G to select the preset to register the station to, and then press dMEMORY to register. You can call preset stations registered by automatic station preset or manual station preset. J1 ■ To select a registered station Press dPRESET F / G to select the preset number of the station. c TUNER d MEMORY d PRESET F / G i Cursor B / C i ENTER i RETURN l OPTION Blinks skipped. “No Presets” or “No Presets in Memory” is displayed when there are no stations are registered. L SL SW C R SR Registered frequencies Press iRETURN to cancel the operation. 4 Use iCursor B / C to select the preset number you want to clear, and press iENTER to clear it. Repeat this operation to clear the registration of multiple numbers. 5 J 1 : Preset numbers to which no stations are registered will be VOL. 01:FM98.50MHz To cancel registration, press iRETURN or do not operate the remote control for about 30 seconds. ■ Recalling a preset station Radio Data System is a data transmission system used by FM stations in many countries. This unit can receive various Radio Data System data such as “Program Service,” “Program Type,” “Radio Text,” “Clock Time” when receiving Radio Data System broadcasting stations. The Radio Data System reception feature is only available in U.K. and Europe models. The number of the preset to be cleared RADIO OPTION 1 2 3 Radio Data System tuning You can display the 4 types of the Radio Data System information: “Program Service,” “Program Type,” “Radio Text,” “Clock Time.” 1 Tune into the desired Radio Data System broadcasting station. We recommend that you use the automatic preset tuning to tune into the Radio Data System broadcasting stations (☞p. 31). Continues to the next page Press lOPTION to finish this operation. J 2 : See the section on “Configuring the settings specific for each input source (Option menu)” for details on the Option menu (☞p. 34). En 32 PLAYBACK FM/AM tuning TRANSMIT RECEIVER SLEEP 2 HDMI 1 2 1 2 3 4 3 4 AV 1 2 V-AUX ProgramService FM AM INFO MEMORY PRESET MUSIC ProgramType VOL. STEREO TUNED CLASSICS L SL SW C R SR READY VOL. TrafficProgram TUNING L SL SW C R SR e (Frequency display) ClockTime STEREO STRAIGHT AudioDecoder SETUP Press iENTER to enable the search function. Status 10800 RadioText DSPProgram SCENE TV 4 Program Type ENHANCER SUR. DECODE BD DVD Frequency c TUNER MOVIE Front panel display (When “Program Type” selected) Information on the display changes as you press the key. The kind of information is displayed for a while and then the information is displayed. J1 AUDIO 5 Press eINFO repeatedly until the desired information is displayed. CD RADIO OPTION ENTER Contents of information are as follows. l VOLUME i Type of information Program Service RETURN MUTE c TUNER e INFO i Cursor B / C i ENTER i RETURN l OPTION “Program Service,” “Program Type,” “Radio Text” and “Clock Type” do not appear when the radio station does not provide the Radio Data System service. Description Displays the name of the Radio Data System program service currently being received. Program Type Displays the type of the Radio Data System program currently being received. Radio Text Displays the information on the Radio Data System program currently being received. Clock Time Displays the current time. DSP Program Displays the currently selected sound field program. Audio Decoder ■ Automatic traffic information reception When the tuner is active, this unit can automatically search for and receive transmissions from traffic information broadcast stations. To enable this function: 1 2 Press cTUNER to switch to the tuner input. When a traffic station is found, it will appear on the display and the Option menu will close. Press lOPTION to display the Option menu. J2 OPTION 3 L SL SW C R SR L SL SW C R SR Traffic info broadcast station (Frequency) If the receiver cannot find a traffic station, “TP Not Found” will appear on the display, and the Option menu will shortly close. VOL. TrafficProgram Type, Radio Text, or Clock Time is displayed. That shows this unit is receiving data (or stopping receiving data). If the data is receivable, the corresponding information is displayed after a while. VOL. STEREO TUNED TPFM101.30MHz Use iCursor B / C to select “TrafficProgram.” OPTION J 1 : “PTY Wait,” “RT Wait,” or “CT Wait” may appear when Program FINISH VOL. VolumeTrim Displays the currently selected surround decoder. • The transmission search will begin in approximately 5 seconds. Or, when the status indicator reads “READY,” you can begin the search immediately by pressing iENTER. • By pressing iRETURN right before or during a search, it will return to the Option menu. • When the status is “READY,” use iCursor B / C to start a search in the specified direction. iCursor B: Searches upward from the current frequency. iCursor C: Searches downward from the current frequency. L SL SW C R SR J 2 : See the Setting the Option menu for Each Input Source section (☞p. 34) for more information on the Option menu. En 33 SETUP TRANSMIT Configuring the settings specific for each input source (Option menu) RECEIVER SLEEP HDMI 1 2 3 4 3 4 This receiver has a unique option menu specific for each type of input source, such as volume trim for compatible input sources, audio/video data display for signals from external devices, and other frequently used menu items. AV 1 2 AUDIO 5 1 2 c Option menu display and setup V-AUX 5 TUNER FM AM INFO MEMORY MOVIE MUSIC PRESET 1 TUNING ENHANCER SUR. DECODE STEREO Use the cInput selector on the remote control to select the Option menu you wish to display. STRAIGHT SCENE BD DVD TV SETUP CD RADIO OPTION ENTER l VOLUME 2 i Press lOPTION. The Option menu appears for the desired input source. OPTION VolumeTrim 3 4 sources Option menu items Input source: All Reduces any change in volume when switching between input sources by correcting volume differences in each input source. You can adjust this parameter for each input source. Adjustable range -6.0 dB to 0.0 dB to +6.0 dB Default setting 0.0 dB Adjustment increments 0.5 dB steps VOL. L SL SW C R SR Select the desired control/setup item using iCursor B / C and press iENTER. The displayed Option menu items differ depending on the input source. For details, read the following Option menu items section. c Input selector i Cursor B / C / D / E i ENTER i RETURN l OPTION ■ Adjusting volume between input Volume Trim For a few seconds after closing the Option menu, the remote control keys may not function. If this occurs, reselect the input source. The following menu items are provided for each input source. Option menu RETURN MUTE To close the Option menu, press lOPTION. HDMI1-4 Volume Trim Audio In Signal Info AV1-2 Volume Trim Audio In Signal Info AV3-4 Volume Trim Signal Info AV5 Volume Trim AUDIO1-2 Volume Trim V-AUX Volume Trim TUNER Volume Trim FM Mode Clear Preset TrafficProgram Auto Preset Select the desired menu item (or enable a function) using iCursor B / C / D / E and iENTER. Parameters of the selected item are displayed. The parameters you can set differ depending on the menu items. • You can also use iRETURN to return to the previous screen or close the Option menu. • Certain selected menu items may automatically close the Option menu when their functions are enabled. En 34 SETUP Configuring the settings specific for each input source (Option menu) ■ Combining HDMI/AV1-2 input source video and audio Audio In Input source: ■ Displaying information on audio/video signals Signal Info Input source: HDMI1-4, AV1-2 Combines video from HDMI or AV input sources with analog/ digital audio inputs in situations such as: – an external device is connected with an HDMI cable but cannot transmit audio through HDMI – an external device with component video output and analog audio output (such as certain game consoles) are connected to the system HDMI1-4, AV1-4 Displays information on digital audio and video signals on the front panel display. You can display the signal information by pressing iENTER on the menu item and using iCursor B / C. FORMAT L SL SW C R SR Information Audio;;;;;;AV1 L SL SW C R SR FM Mode Audio information ■ Automatically presetting FM radio stations Auto Preset Input source: Assignable audio input jacks To change assignments, select an input source (HDMI1-4 or AV1-2) as the video input first, and then select audio input jacks in this menu. Set as follows according on the desired combination of audio input jacks. Audio inputs Settings method Optical digital audio input Select AV1 or AV4. Connect the external component audio cable to the optical jack for the selected input. Coaxial digital audio input Analog audio input Select AV2 or AV3. Connect the external component audio cable to the coaxial jack for the selected input. Select one of AV5, AUDIO1, or AUDIO2. Connect the external component audio cable to the audio jack for the selected input. • For details of settings, refer to “Receiving audio from other input sources” (☞p. 15) and “Component connections to analog audio output devices” (☞p. 16). • To return audio inputs to their previous settings, display this item again, and select the original input jack. TUNER Sets this unit to automatically match FM broadcast frequencies in stereo, or to convert the frequency to monaural (☞p. 30). VOL. DolbyD VOL. ■ Changing FM mode (Stereo/Monaural) Input source: Menu item Inputs that change the audio source HDMI1 • “No Signal” is displayed when no signals are being received, and “---” is displayed if this unit cannot recognize the incoming signal. • The bit rate may vary during playback. FORMAT Format of audio signals. CHAN The number of input signal channels (front/surround/ LFE). For example, if input signal channels are 3 front channels, 2 surrounds and LFE, “3/2/0.1” is displayed. TUNER Automatically detects radio stations in the FM frequency and registers them as preset stations (☞p. 31). ■ Clearing preset FM stations Clear Preset SAMPL The sampling frequency of analog-to-digital conversion. Input source: B RATE The bit rate of input signal per second. ■ Searching for traffic information Video information V IN Format and resolution of video input signal. V OUT Format and resolution of video output signal. V.MSG (appears only when an error has occurred) Error messages about HDMI signals and components. TUNER Clears the preset stations (☞p. 32). TrafficProgram Input source: TUNER Automatically searches for traffic information with the Radio Data System (☞p. 32). Error message HDCP Error HDCP authentication failed. Device Over The number of connected HDMI components is over the limit. En 35 SETUP Setting various functions (Setup menu) TRANSMIT RECEIVER SLEEP You can configure various function settings of this unit using the Setup menu. HDMI 1 2 3 4 3 4 AV 1 2 Setup menu display and settings AUDIO 5 1 3 2 V-AUX 1 TUNER FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING Press hSETUP on the remote control. HDMI SETUP ENHANCER SUR. DECODE STEREO L SL SW C TV SETUP CD RADIO h OPTION ENTER VOLUME i 2 Use the iCursor B / C to select the desired menu and press iENTER. Setup menu categories RETURN MUTE h SETUP i Cursor B / C / D / E i ENTER i RETURN Speaker Setup Manages settings for speakers. Sound Setup Manages settings for audio output. Func. Setup Manages settings to make receiver operation easier, such as input source labeling and auto-standby functions. DSP Parameter Sets parameters for sound field programs. Memory Guard Protects settings against accidental alteration. SOUND Lipsync Ex: Sound Setup menu L SL SW C R SR R SR Subwoofer Front Center 4 5 6 Sur. LR Crossover SWFR Phase Press iCursor D / E to change the setting. You can change other items by repeating step 4 and 5. Press hSETUP to exit the Setup menu. For a few seconds after closing the Setup menu, the remote control keys may not function. If this occurs, reselect the input source. SW C Config When multiple items appear, use iCursor B / C to select the desired item. You can also use iRETURN to return to the previous screen. VOL. L SL Setup menu R SR SCENE BD DVD Setup menu items Speaker Setup VOL. Audio;;;;;;Amp VOL. SpeakerSetup STRAIGHT Use iCursor B / C to navigate the submenus to find the desired setting and press iENTER. Extra Bass Level Distance Equalizer Test Tone Sound Setup Lipsync (speakers) (unit and speakers) (speakers and frequency bands) HDMI Auto Auto Manual Adaptive DRC D.Range Max Volume Init.Volume HDMI Audio Out Func. Setup Input Rename AutoPowerDown Dimmer DSP Parameter Memory Guard En 36 SETUP Setting various functions (Setup menu) ■ Manual speaker setup Manages settings for speakers Config SETUP Adjusts the output characteristics of the speakers based on manually set parameters. VOL. SpeakerSetup L SL SW C In the Config submenu, you can select the speaker size characteristic (Large or Small). Select the size (sound reproduction capacity) that matches your speakers. Manually manages speaker configuration, such as speaker size (sound production capacity), and bass audio processing. Level Manually adjusts the volume of each speaker. Distance Manually adjusts the output of each speaker based on distance to the listening point. Equalizer Selects an equalizer to adjust speaker output characteristics. Test Tone Small (Default) Select this for small speakers. The subwoofer will produce front channel low-frequency components. J3 Large Select this for large speakers. The front speakers will produce all of the front channel frequency components. R SR Speaker Setup submenu Config Front Selects the size (sound reproduction capacity) of the front speakers. J2 Generates test tones. Center Selects the size of the center speakers. Woofer diameter • 16 cm or larger → Large • 16 cm or smaller → Small When speaker size is set to “Small,” low-frequency components of the speakers that you configured are produced from the subwoofer (or from the front speakers if there is no subwoofer). Subwoofer Confirms the subwoofer. Yes (Default) None J 1 : Enabling the “Extra Bass” setting allows both the subwoofer and the front speakers to produce bass audio. J 2 : When “Subwoofer” is set to “None,” you can only choose “Large.” If the front speaker setting is “Small” and you change “Subwoofer” to “None,” it will automatically change to “Large.” Select this when you have a subwoofer connected. During playback, the subwoofer will produce audio from the LFE (low-frequency effect) channel and bass audio from other channels. J1 None Select this when there is no center speaker. The front speakers will produce center channel audio. Small (Default) Select this when a small center speaker is connected. Large Select this when a large center speaker is connected. Sur. LR Selects the size of the surround speakers. None Select this when no surround speakers are connected. The front speakers will produce surround channel audio signals. Small (Default) Select this when the surround speakers are small. Large Select this when the surround speakers are large. Select this when you do not have a subwoofer connected. The front speakers will produce audio from the LFE (low-frequency effect) channel and bass frequency audio from other channels. J 3 : Enabling the “Crossover” setting allows you to set the frequency components of audio signals transmitted from the front speakers to the subwoofer. En 37 SETUP Setting various functions (Setup menu) Crossover Sets the lower limit of low-frequency component output from speakers set to “Small.” Audio with a frequency below that limit will be produced from the subwoofer or the front speakers. J1 ■ Controlling the volume of each speaker Level Distance Separately adjusts the volume of each speaker. Use iCursor B / C to select the desired speaker and adjust the volume with iCursor D / E. 40Hz 110Hz 60Hz 120Hz FL Front speaker L 80Hz (Default) 160Hz FR Front speaker R 90Hz 200Hz C Center speaker SL Surround speaker L SR Surround speaker R SWFR Subwoofer 100Hz SWFR Phase Sets the phase of the subwoofer if the bass audio is lacking or unclear. NRM (Default) Does not change the subwoofer phase. REV Reverses the subwoofer phase. Extra Bass Allows the front channel low-frequency components to be produced exclusively by the subwoofer, or by both the subwoofer and the front speakers. On The subwoofer and the front speakers produce the front channel low-frequency components. Off (Default) Depending on the size of the front speakers, either the front speakers or the subwoofer produce the front channel low-frequency components. ■ Manually setting speaker distance Adjusts the timing at which the speakers produce audio so that sounds from the speakers reach the listening position at the same time. Selecting adjustment units Use iCursor B / C to display “Unit,” and then use iCursor D / E to choose the units of length (meters or feet). Setting distances for each speaker Use iCursor B / C to display the speaker you want to configure, and then use iCursor D / E to set the distance from the speaker to your listening position. Unit Selects the distance unit (meters or feet). Adjustable range -10.0 dB to +10.0 dB Front L Front speaker L Default setting 0 dB (FL / FR / SWFR) -1.0 dB (C / SL / SR) Front R Front speaker R Center Center speaker 0.5 dB Sur. L Surround speaker L Sur. R Surround speaker R SWFR Subwoofer Adjustable range 0.30 m to 24.0 m (1.0 ft to 80.0 ft) Default setting 3.00 m (10.0 ft) (Front L/Front R/SWFR) 2.60 m (8.5 ft) (Center) 2.40 m (8.0 ft) (Sur. L/Sur. R) Adjustment increments 0.10 m (0.5 ft) Adjustment increments When the “Subwoofer” is set to “None,” the “Extra Bass” setting is disabled. J 1 : If your subwoofer has a volume control or a crossover frequency control, set the crossover frequency to maximum and the volume to half (or slightly less). En 38 SETUP Setting various functions (Setup menu) ■ Adjusting sound quality with the equalizer Equalizer Adjusts sound quality of tone using a parametric or graphic equalizer. ■ Generating test tones 3 Raising volume: Press iCursor E. Lowering volume: Press iCursor D. EQ Select Select an equalizer type. PEQ GEQ Off Uses the graphic equalizer to adjust sound quality. By pressing iENTER, you can adjust the characteristics of the graphic equalizer. Does not activate the equalizer. ■ Adjusting the graphic equalizer When “EQ Select” is displayed, use iCursor D / E to select “GEQ” and press iENTER. Check that “Channel” appears and use iCursor D / E to select the speaker for which you want to adjust the equalizer. GEQ VOL. 63Hz Uses the parametric equalizer to adjust sound quality. Selecting this setting applies the tone settings obtained using YPAO (☞p. 21). J1 GEQ (Default) 1 2 Press iCursor C repeatedly to select the frequency you want to adjust, then use iCursor D / E to adjust the volume. Frequency band L SL SW C Test Tone Turns the test tone generator on or off. Off (Default) Does not generate test tones. On Generates test tones. While “On” is selected, test tones are produced constantly. R SR Setting the volume level for the selected frequency Frequency range 63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/ 16 kHz Adjustable range -6.0 dB to 0 dB to +6.0 dB Default setting 0 dB Adjustment increments 0.5 dB You can use the test tone in a variety of circumstances. For example, you can adjust the volume balance settings for each speaker, or whenever you adjust the settings on the internal graphic equalizer, you can listen to the actual effect while operating this unit. Turn the test tone off when you have finished making adjustments. You can use iCursor B / C to select another frequency or return to step 2. Repeat steps 2-3 to adjust the tone to your liking. VOL. Channel;FRNT L L SL SW C R SR 4 When you have finished making adjustments, press hSETUP to close the Setup menu. The speaker you are adjusting J 1 : Using YPAO to carry out acoustic measurement selects “PEQ” automatically. “PEQ” does not appear if the measurement process has not been carried out at least once. En 39 SETUP Setting various functions (Setup menu) SoundSetup Lipsync Adjusts the delay between audio and video output (Lipsync function). VOL. L SL SW C R SR Sound Setup submenu Lipsync Adjusts the delay between video and audio output. Adaptive DRC Auto-adjusting the sound level to make even low volumes more audible. D.Range Selects the dynamic range adjustment method for digital audio playback. Max Volume Sets the maximum volume for this receiver. Init.Volume Sets the initial volume for when this receiver is turned on. HDMI Audio Out Selects audio signals received through the HDMI input jack. HDMI Auto When connecting to a TV via HDMI, automatically adjusts output timing if the TV supports an automatic lipsync function. Off (Default) On Select this when the connected TV does not support the automatic lipsync function or you do not wish to use the automatic lipsync function. Set the correction time in “Manual.” Select this when the TV supports the automatic lipsync function. Fine-adjust the correction time in “Auto.” Auto Fine-adjust the audio output timing by entering the correction time provided when “HDMI Auto” is set to “On.” Adjustable range 0 ms to 240 ms Adjustment increments 1 ms ■ Auto-adjusting the sound level to make even low volumes more audible Adaptive DRC Adjusts the dynamic range in conjunction with the volume level (from minimum to maximum). When you play audio at night or at low volumes, it is a good idea to set parameter to “Auto.” J1 Auto Adjusts the dynamic range automatically. Off (Default) Does not adjust the dynamic range automatically. When the auto function is enabled, it adjusts the dynamic range as follows. Auto Off Input Level Volume: low Output Level SETUP ■ Synchronizing audio/video output Output Level Setting the audio output function of this unit Auto Off Input Level Volume: high Manual Manually adjusts the correction time. Select this when the TV does not support the automatic lipsync function or “HDMI Auto” is set to “Off.” Adjustable range 0 ms to 240 ms Adjustment increments 1 ms Default setting 0 ms J 1 : The Adaptive DRC setting is also effective when you use headphones. En 40 SETUP Setting various functions (Setup menu) ■ Auto-adjusting Dolby Digital and DTS dynamic range D.Range Selects the dynamic range adjustment method for audio bitstream (Dolby Digital and DTS) playback. ■ Setting the startup volume Init.Volume Sets the initial volume for when this receiver is turned on. When this parameter is set to “Off,” the volume is set at the level when the receiver last entered standby mode. J1 Max (Default) Produces audio without adjusting the dynamic range. Adjustable range Off, Mute, -80 dB to +16.5 dB STD Sets the standard dynamic range suitable for home use. Default setting Off Sets the dynamic range at the lowest level for playback. This is useful for low-volume audio. Adjustment increments 0.5 dB Min ■ Setting the maximum volume Max Volume ■ Changing the output destination of HDMI input audio signals HDMI Audio Out Sets a maximum volume level so that the audio is not played too loudly. The default setting of +16.5 dB produces the highest volume. Adjustable range -30.0 dB to +15.0 dB / +16.5 dB (Maximum volume) Default setting +16.5 dB Adjustment increments 5.0 dB Choose whether to playback audio from an external component such as a BD/DVD player connected via HDMI through this unit or through a TV. Amp (Default) Outputs audio through this unit only. When this setting is selected, the external component outputs an audio format compatible with this unit. TV Outputs audio through a TV only. When this setting is selected, the external component outputs an audio format compatible with the TV. J2 Amp+TV Outputs audio from the TV and this unit. When this setting is selected, the external component outputs an audio format compatible with this unit and TV. J 1 : When you set the “Max Volume” at a lower level than “Init.Volume,” the “Max Volume” setting has priority. J 2 : When “TV” is selected, the speakers of this unit do not output sound. En 41 SETUP Setting various functions (Setup menu) TRANSMIT Making the receiver easier to use RECEIVER SLEEP HDMI 1 2 3 4 3 4 3 AV 1 2 SETUP AUDIO 5 1 2 L SL SW C R SR TUNER FM Func. Setup submenu AM PRESET INFO MEMORY MOVIE MUSIC SCENE SETUP Input Rename Changes the input source names. AutoPowerDown Goes into standby mode. Dimmer Sets the Brightness of the front panel display. STEREO STRAIGHT TV CD Blu-ray Satellite DVD VCR SetTopBox Tape Game MD TV PC DVR iPod CD HD DVD CD-R (blank) HDMI1 RADIO h VOLUME RETURN i ■ Changing input source names Input Rename MUTE Changes the input source names to be shown on the front panel display. You can change an input source name by choosing from a list of templates, or make one of your own. 4 4 HDMI1 HDMI1 h SETUP i Cursor B / C / D / E i ENTER i RETURN L SL SW C R SR HDMI1 Renaming the input source 2 Select the input source that you want to rename using iCursor B / C. 5 6 A to Z, a to z 0 to 9 Symbols (#, *, -, +, etc.) Space Repeat step 4 until you have entered the new input source name. Confirm the new display name by pressing iENTER. Press hSETUP to exit the Setup menu. To cancel a name change, press iRETURN. Select “Input Rename” from the Setup menu and press iENTER. HDMI1 Use iCursor B / C to select the characters you wish to change, and use iCursor D / E to enter those characters. • • • • Confirm the new display name by pressing iRETURN. Press hSETUP to exit the Setup menu. To cancel a name change, select the original name and then press iRETURN to exit renaming. 1 VOL. R SR The following characters are available for input source. ■ Entering an original name Select “Input Rename” from the Setup menu and press iENTER. SW C L SL Cursor ■ Selecting a template 1 VOL. HDMI1 OPTION ENTER Press iENTER. TUNING ENHANCER SUR. DECODE BD DVD 3 VOL. Func.Setup V-AUX Use iCursor D / E to select a new name from the following templates. VOL. L SL SW C R SR Renaming the input source 2 Select the input source that you want to rename using iCursor B / C. En 42 SETUP Setting various functions (Setup menu) ■ Goes enter standby mode automatically when you leave it without operating Setting sound field program parameters You can set the parameters for the sound field programs (☞p. 44). AutoPowerDown If you do not operate this unit or use the remote control for an extended period of time, it will automatically go into standby mode (Auto Power Down function). This function’s default setting is “Off.” When you wish to activate this function, set the amount of time to pass before this unit will enter standby. Off (Default) Auto Power Down function is disabled. 4hours Goes into standby mode, when you have not operated this unit for four hours. 8hours Goes into standby mode, when you have not operated this unit for eight hours. 12hours Goes into standby mode, when you have not operated this unit for twelve hours. This unit starts a countdown of 30 seconds before entering the standby mode. Pressing any key of the remote control during the countdown cancels entering the standby mode and reset the timer. SETUP VOL. DSPParameter L SL SW C R SR Prohibiting setting changes SETUP Memory Guard VOL. L SL SW C R SR Prohibits setting changes to prevent careless changes being made to the settings on Setup menu. Off (Default) Settings are not protected. On Prohibits changes to the settings on Setup menu until it is returned to “Off.” While set to “On,” the unit displays “Memory Guard!” when an attempt is made to change the settings. ■ Setting the brightness of the front panel display Dimmer Sets the brightness of the front panel display. Lowering the setting dims the display. Adjustable range -4 to 0 Default setting 0 En 43 SETUP Setting sound field program parameters TRANSMIT RECEIVER SLEEP Although the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters). To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations. HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 1 Setting sound field parameters 2 4 V-AUX TUNER FM PRESET INFO 1 2 AM TUNING MEMORY ENHANCER SUR. DECODE MOVIE MUSIC STEREO STRAIGHT SCENE BD DVD TV SETUP CD RADIO SETUP VOLUME DSPPRM Use iCursor B / C to select “DSP Parameter” and press iENTER. VOL. DSPParameter i Sound field parameter L SL SW C R SR RETURN MUTE 3 Use iCursor D / E to choose the sound field program you want to edit. DSPPRM Sci-Fi Sound field program to be edited h SETUP i Cursor B / C / D / E i ENTER VOL. L SL SW C R SR DSP Level Change the effect level (level of the sound field effect to be added). You can adjust the level of the sound field effect while checking the sound effect. VOL. DSPLevel;;0dB h OPTION ENTER Press hSETUP to display the Setup menu. ■ CINEMA DSP parameters Press iCursor B / C to select the parameter that you want to change, and press iCursor D / E to change the parameter. L SL SW C -6 dB to 0 dB to +3 dB Default setting 0 dB Choices When there are multiple parameters in the sound field program you are configuring, repeat step 4 as necessary to change other parameters. 5 Adjustable range R SR Once you have completed editing, press hSETUP to close the Setup menu. Adjust “DSP Level” as follows: • The effect sound is too soft. • There are no differences between effects of the sound field programs. → Increase the effect level. • The sound is dull. • The sound field effect is added too much. → Reduce the effect level. ■ To initialize the sound field parameters To set the parameters of the sound field program back to default, press iCursor C repeatedly during editing to select “Initialize” and press iCursor E. When “Press Again >” is displayed, press iCursor E again to initialize. DSPPRM Initialize VOL. L SL SW C R SR To cancel operations, press iCursor D when “Press Again” appears and return to the original display. En 44 SETUP Setting sound field program parameters ■ Parameters usable in certain sound field programs EFCT LVL 2ch Stereo only Adjusts the effect level of the compressed music enhancer mode. Direct Automatically bypasses the DSP circuit and tone control circuit depending on the condition of tone control etc., when an analog sound source is played back. You can enjoy a higher quality sound. Auto (Default) Off Straight Enhancer/5ch Enhancer only Outputs sound by bypassing the DSP circuit and tone control circuit when both tone controls of “Bass” and “Treble” are set to 0dB. Does not bypass the DSP circuit and tone control circuit. 5ch Stereo only CT Level Adjusts the center channel volume. J1 Adjustable range 0 to 100% Default setting 100% SL Level Adjusts the volume of the surround L channel. J1 High (Default) Standard effect. Low Sets when the high-frequency signals of the source are emphasized excessively. ■ Parameters usable in surround decoder q PLII Music only Dimension Adjusts the difference in level between the front sound field and the surround sound field. You can adjust the difference in level created by the software being played back to obtain the preferred sound balance. The surround sound gets stronger as you make the value more negative, and the front sound gets stronger as you make the value more positive. Adjustable range -3 to STD to +3 Default setting STD (Standard) Panorama Adjusts the soundscape of the front sound field. Sends front left/ right channels sounds to the surround speakers as well as the front speakers for a wraparound effect. Off (Default) Disables the effect. On Enables the effect. CT Width Spreads the center channel sound to the front left and right speakers to suit your needs or preferences. Set this parameter to 0 for outputting the center sound from the center speaker only, or to 7 for outputting it from the front left/right speaker only. Adjustable range 0 to 100% Adjustable range 0 to 7 Default setting 100% Default setting 3 SR Level Adjusts the volume of the surround R channel. J1 Adjustable range 0 to 100% Default setting 100% J 1 : Not displayed when speakers are set to be inactive. En 45 SETUP Extended functionality that can be configured as needed (Advanced Setup menu) TRANSMIT RECEIVER SLEEP The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows. HDMI 1 2 3 4 3 4 AV 1 2 Displaying/Setting the Advanced Setup menu AUDIO 5 1 2 V-AUX TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC TUNING ENHANCER SUR. DECODE STEREO STRAIGHT g ENE BD DVD TV SETUP CD RADIO 1 2 VOLUME i RETURN MUTE Press A while pressing and holding STRAIGHT on the front panel. A Press STRAIGHT a few times to select the value you wish to change. Switch this unit to the standby mode, and then switch it on again. The settings become effective and the unit is powered on. If initialization is selected, it will be performed when the unit is powered on again. Release the keys when “ADVANCED SETUP” is displayed on the front panel display. After approximately 3 seconds, the top menu items are displayed. OPTION ENTER Set this unit to the standby mode. 4 5 Avoiding crossing remote control signals when using multiple Yamaha receivers INFO MEMORY PRESET Initializing various settings for this unit INIT-CANCEL FM REMOTEID-ID1 AM SCENE BD DVD PHONES INPUT TONE CONTROL TV CD PROGRAM RADIO STRAIGHT SILENT CINEMA PROGRAM l / h REMOTEID-ID1 3 • To set to ID1 Press iCursor D and “BD/DVD” under gSCENE for 3 seconds or longer. • To set to ID2 Press iCursor D and “TV” under gSCENE for 3 seconds or longer. STRAIGHT YPAO MIC g SCENE i Cursor D ■ To change the remote control ID Use PROGRAM to select the item to be set from the following items. In the Advanced Setup menu, you can set the following settings. REMOTE ID Changes the remote control ID of a receiver. INIT Initializes various settings for this unit. The remote control of the unit can only receive signals from a receiver which has an identical ID (remote control ID). When using multiple Yamaha AV receivers, you can set each remote control with a unique remote control ID for its corresponding receiver. On the contrary, if you are setting the same remote control ID for all receivers, you can use one remote control to operate 2 receivers. ID1 (Default) Receives the remote control signals set in ID1. ID2 Receives the remote control signals set in ID2. Initializes various settings stored in this unit and sets it back to default. Select the items to be initialized from the following. DSP PARAM Initializes all parameters for the sound field programs. ALL Resets this unit to default factory settings. CANCEL (Default) Does not initialize. En 46 APPENDIX Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General Problem The power will not turn on. Cause The protection circuitry operated three times consecutively. Remedy See page As a safety precaution, when the protection circuitry operates three times consecutively, the capability to turn on the power is disabled. Please contact your nearest Yamaha dealer or service center to request repair. — The unit enters standby mode soon after the power is turned on. The power cable is not completely inserted. Connect the power cable properly to an AC wall outlet. — (When this unit is turned back on and “CHECK SP WIRES!” is displayed.) The protection circuitry has been activated because this unit was turned on while a speaker cable was shorted. Make sure that all speaker cables between this unit and speakers are connected properly. 11 This unit cannot be turned off or does not work properly. The internal microcomputer is hung-up due to an external electric shock (such as lightning or excessive static electricity) or by a drop in power supply voltage. Disconnect the power cable from the AC wall outlet, wait about 30 seconds and then plug it in again. — The batteries in the remote control may have lost their charge. Replace all batteries. 4 The unit enters standby mode. The protection circuitry has been activated because of a short circuit, etc. Check that the speaker with an impedance of at least 6Ω. — After display of a countdown on the front panel, the unit goes into standby mode. If you do not use take any action, the Auto Power Down function operates. Turn on the unit, and play the source again. — In the Setup menu “AutoPowerDown” (“Func. Setup” → “AutoPowerDown”), increase the time until switching to standby mode, or turn off the Auto Power Down function. 43 Problem Cause See page Remedy “Internal Error” is displayed on the front panel display. An internal error has occurred. Please contact authorized Yamaha dealer or service center to request repair. — Sound/images suddenly go off. The protection circuitry has been activated because of a short circuit, etc. Check that the speaker wires are not touching each other, then turn the unit back on. — The sleep timer has turned off the unit. Turn on the unit, and play the source again. — En 47 APPENDIX Troubleshooting Problem No sound. No picture. Cause Remedy See page Incorrect input or output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. 15 If a DVI-HDMI cable is used to connect the unit with an external component, then it is necessary to use an audio input jack for a different input to output audio. Display the HDMI Input Option menu for the connected cable, select “Audio In,” and select the jack to use for audio input. 35 Speaker connections are not secure. Secure the connections. 11 The HDMI components connected to the unit do not support the HDCP copy protection standards. Connect HDMI components that support the HDCP copy protection standards. 35 The audio input into the device is set to playback through the TV. In the Setup menu, set the HDMI Audio Out (“Sound Setup” → “HDMI Audio Out”) to other than “TV.” 41 No appropriate input source has been selected. Select an appropriate input source with cInput selector (on the remote control). 25 The volume is turned down or muted. Turn up the volume. — Signals that this unit cannot reproduce are being input from a source component, such as a CDROM. Use an input source that has signals that can be reproduced on this unit. — A video jack (ex. Video input → HDMI output) type different to the input video is being used to try to display content on the TV. Use video jacks of the same type (ex. Video input → Video output) to connect to the TV. 13 An appropriate video input is not selected on the TV. Select an appropriate video input on the TV. — Problem No sound is output from a specific speaker. Only the center speaker outputs substantial sound. Cause See page Remedy The speaker is malfunctioning. Check the Speaker indicators on the front panel display. If the corresponding indicator lights up, connect another speaker and check if sound is output. If sound is not output, the unit may be malfunctioning. The playback component or speakers are not connected properly. Connect the cables properly. If the problem persists, the cables may be defective. 11, 15 Output from that speaker is disabled. Check the Speaker indicators on the front panel display. If the corresponding indicator is turned off, try the following. 1) Change to a different input source. 2) With the selected sound field program, sound is not output from that speaker. Select another sound field program. 3) “None” may have been selected for that speaker on this unit. Display “Speaker Setup” in the Setup menu, and set respective parameters to enable output from that speaker (“Speaker Setup” → “Config”). 7, 37 The volume of that speaker is set to the minimum in “Speaker Setup” in the Setup menu. Display “Speaker Setup” in the Setup menu and adjust the volume (“Speaker Setup” → “Level”). 38 (If hardly any sound comes from one channel) Speaker output balance is not set correctly. Balance the volume of each speaker from “Level” in the Setup menu (“Speaker Setup” → “Level”). 38 Sound may not be output from certain channels, depending on the input source or sound field program. Try another sound field program. 26 When a monaural source sound field program is applied, for some surround decoders, sound from all channels is output from the center speaker. Try another sound field program. 26 En 7 48 APPENDIX Troubleshooting Problem No sound is heard from the surround speakers. No sound is heard from the subwoofer. Cause Remedy See page This unit is in straight decoding mode and a monaural source is being played back. Press fSTRAIGHT (on the remote control) to exit straight decoding mode. 27 Sound may not be output from certain channels depending on input sources or sound field programs. Try another sound field program. 26 A subwoofer is not connected, or it is disabled. Check that a subwoofer is connected correctly, and from the Setup menu “Subwoofer” (“Speaker Setup” → “Config” → “Subwoofer”), set the subwoofer to “On.” 37 Turn the subwoofer power on. If the subwoofer includes an Auto Power Off function, then lower the Auto Power Off sensitivity settings. — The subwoofer is turned off. The source does not contain LFE (☞p. 52) or low frequency signals. Problem Noise/hum noise is heard. The volume cannot be increased, or the sound is distorted. — Cause See page Remedy Incorrect cable connection. Connect the audio cables properly. If the problem persists, the cables may be defective. — A DTS-CD is being played back. If a DTS bitstream signal is not properly input to this unit, only noise is output. Connect the playback component to this unit by digital connection and play back the DTS-CD. If the condition is not resolved, the problem may result from the playback component. Consult the manufacturer of the playback component. — The component connected to the output jacks of this unit is not turned on. When the component connected to the output jacks of this unit is not turned on, the sound may be distorted, or the volume may decreased due to the nature of AV receivers. Turn on all components connected to this unit. — “Max Volume” is set to a low value. Set it to a higher value. 41 The right combination of audio / video jacks to connect cannot be found. Combine input connected to the external component video output with another input audio jack. Select a desired input source (HDMI1-4 or AV1-2) as a video input and select a audio input source from “Audio In” in the Option menu. 35 The audio input sources cannot be played in the desired digital audio signal format. The connected component is not set to output the desired digital audio signals. Set the playback component properly referring to its instruction manual. — Problem An error with the HDMI connection has occurred. Try re-inserting the HDMI cable. — This unit does not support playback of HD Audio (TrueHD, Dolby Digital plus, DTS Master Audio, etc.) or DTS 96/24, etc. Signals, such as HD Audio and DTS 96/24, can be played by standard decoders (Dolby Digital, DTS Digital Surround, etc.). — The front panel display HDMI indicator is flashing. Confirm that HDMI video that is not supported by the unit is not being input (HDMI Input → Option menu → “Signal Info”). 35 This unit is too close to other digital or radio frequency equipment. Move this unit further away from such equipment. — No picture or sound. The number of components is over the limit. Disconnect some of the HDMI components. — The connected HDMI component does not support high-bandwidth digital copyright protection (HDCP). Connect an HDMI component that supports HDCP. — There is noise interference from digital or radio frequency equipment. HDMI™ Cause See page Remedy En 49 APPENDIX Troubleshooting Tuner (FM/AM) FM AM Problem FM stereo reception is noisy. Cause You are too far from the station transmitter, or the input from the antenna is weak. Remedy See page Check the antenna connections. 20 Switch to monaural mode. 30 Replace the outdoor antenna with a more sensitive multi-element antenna. — Adjust the antenna height or orientation, or place it in a different location. — There is distortion, and clear reception cannot be obtained even with a good FM antenna. There is multi-path interference. The desired station cannot be tuned into with the automatic tuning method. You are in an area far from a station, or input from the antenna is weak. Replace the outdoor antenna with a more sensitive multi element antenna. — Use dTUNING H / I (on the remote control) to manually select the station. 30 “No Presets” is displayed. No preset stations are registered. Register stations you wish to listen to as preset stations before operation. 31 See page Problem Cause Remedy The desired station cannot be tuned into with the automatic tuning method. The signal is weak, or the antenna connections are loose. Adjust the AM loop antenna orientation. 20 Use the manual tuning method. 30 Automatic station preset does not work. Automatic station preset is not available for AM stations. Use manual station preset. 31 Continuous crackling and hissing noises are heard. The supplied AM loop antenna is not connected. Connect the AM loop antenna correctly even if you use an outdoor antenna. 20 The noises may be caused by lightning, fluorescent lamps, motors, thermostats, or other electrical equipment. It is difficult to completely eliminate noise, but it can be reduced by installing and properly grounding an outdoor AM antenna. 20 Buzzing and whining noises are heard. A TV set is being used nearby. Move this unit away from the TV set. — En 50 APPENDIX Troubleshooting Remote control Problem The remote control does not work or function properly. External components cannot be controlled using the remote control. Cause Remedy See page Wrong distance or angle. The remote control will function within a maximum range of 6 m / 20 ft, and no more than 30 degrees off-axis from the front panel. — Direct sunlight or lighting (from an inverter type of fluorescent lamp, strobe light, etc.) is striking the remote control sensor of this unit. Adjust the lighting angle, or reposition this unit. — The batteries are weak. Replace all batteries. 4 The remote control ID of the remote control and this unit do not match. Match the remote control ID of this unit and the remote control. 46 The remote control code is not correctly set. If this unit does not work when you press iCursor B / C / D / E (on the remote control), do the following. When the key does not work during DVD disc menu operation: press the cInput selector (on the remote control) again. — When the key does not work during Option menu/Setup menu operation: press the key corresponding to the current menu operation again. — Even if the remote control code is correctly set, there are some models that do not respond to the remote control. — En 51 APPENDIX Glossary Audio information Audio and video synchronization (lip sync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem, and the capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustment, HDMI version 1.3 incorporates an automatic audio and video syncing capability that allows devices to perform this synchronization automatically and accurately without user interaction. Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (front L/R and center), and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, referred to as LFE (Low-Frequency Effect), the system has a total of 5.1channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the surround speakers, more accurate moving sound effects and surround sound environments are possible than with Dolby Surround. The wide dynamic range from maximum to minimum volumes that are reproduced by the 5 full-range channels, and the precise sound orientation generated using digital sound processing provides listeners with unprecedented excitement and realism. With this unit, any sound environment from monaural up to a 5.1-channel configuration can be freely selected for your enjoyment. Dolby Pro Logic II Dolby Pro Logic II is an improved technique used to decode vast numbers of existing Dolby Surround sources. This new technology enables a discrete 5-channel playback with 2 front left and right channels, 1 center channel, and 2 surround left and right channels, instead of only 1 surround channel for conventional Pro Logic technology. There are three modes available: “Music mode” for music sources, “Movie mode” for movie sources, and “Game mode” for game sources. Dolby Surround PCM (Linear PCM) Dolby Surround uses a 4-channel analog recording system to reproduce realistic and dynamic sound effects: 2 front left and right channels (stereo), a center channel for dialog (monaural), and a surround channel for special sound effects (monaural). The surround channel reproduces sound within a narrow frequency range. Dolby Surround is widely used with nearly all video tapes and laser discs, as well as in many TV and cable broadcasts. The Dolby Pro Logic decoder built into this unit employs a digital signal processing system that automatically stabilizes the volume on each channel to enhance moving sound effects and directionality. Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression. This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time. Standing for “Pulse Code Modulation,” the analog signal is encoded as pulses and then modulated for recording. DTS Digital Surround DTS Digital Surround was developed to replace the analog soundtracks of movies with a 5.1-channel digital sound track, and is now rapidly gaining popularity in movie theaters around the world. DTS, Inc. has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS Digital Surround in your home. This system produces practically distortion-free 5.1-channel sound (technically, left, right and center channels, 2 surround channels, plus an LFE 0.1 channel as a subwoofer, for a total of 5.1-channels). Sampling frequency and number of quantized bits When digitizing an analog audio signal, the number of times the signal is sampled per second is called the sampling frequency, while the degree of accuracy when converting the sound level into a numeric value is called the number of quantized bits. The range of rates that can be played back is determined based on the sampling rate, whereas the dynamic range representing the sound level difference is determined by the number of quantized bits. In principle, the higher the sampling frequency, the wider the range of frequencies that can be played back, and the higher the number of quantized bits, the more accurately the sound level can be reproduced. Sound field program information DSD Direct Stream Digital (DSD) technology stores audio signals on digital storage media, such as Super Audio CDs. Using DSD, signals are stored as single bit values at a high-frequency sampling rate of 2.8224 MHz, while noise shaping and oversampling are used to reduce distortion, a common occurrence with very high quantization of audio signals. Due to the high sampling rate, better audio quality can be achieved than that offered by the PCM format used for normal audio CDs. The frequency is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This unit can transmit or receive DSD signals via the HDMI jack. LFE 0.1 channel This channel reproduces low-frequency bass signals, and has a frequency range from 20 Hz to 120 Hz. This channel is counted as 0.1, because it only enforces a low-frequency range compared to the full-range reproduced by the other 5 channels in Dolby Digital or DTS 5.1-channel systems. CINEMA DSP Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater having many speakers designed for acoustic effects. Since home conditions, such as room size, wall material, number of speakers, and so on, can differ so widely, it is inevitable that there are differences in the sound that is heard. Based on a wealth of actually measured data, Yamaha CINEMA DSP uses Yamaha’s original DSP technology to combine Dolby Pro Logic, Dolby Digital, and DTS systems to provide the audiovisual experience of a movie theater in the listening room of your own home. Compressed music enhancer The Compressed music enhancer feature of this unit enhances your listening experience by regenerating the missing harmonics in compression artifacts. As a result, it compensates for flattened complexity due to the loss of high-frequency fidelity as well as lack of bass due to the loss of lowfrequency bass, providing improved performance for the overall sound system. En 52 APPENDIX Glossary SILENT CINEMA HDMI Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound field program, so that accurate representations of all the sound field programs can be enjoyed on headphones. HDMI (High-Definition Multimedia Interface) is the first industry supported, uncompressed, all-digital audio/video interface. Providing an interface between any sources (such as set-top boxes or AV receivers) and audio/video monitors (such as digital TV), HDMI supports standard, enhanced or high-definition video as well as multichannel digital audio using a single cable. HDMI transmits all ATSC HDTV standards and supports 8-channel digital audio, with bandwidth to spare to accommodate future enhancements and requirements. When used in combination with HDCP (High-bandwidth Digital Content Protection), HDMI provides a secure audio/video interface that meets the security requirements of content providers and system operators. For further information on HDMI, visit the HDMI website at “http:// www.hdmi.org/.” Virtual CINEMA DSP Yamaha has developed a Virtual CINEMA DSP algorithm that allows you to enjoy DSP surround effects even without any surround speakers, by using virtual surround speakers. It is even possible to enjoy Virtual CINEMA DSP using a minimal two-speaker system that does not include a center speaker. Video information “x.v.Color” Component video signal With the component video signal system, the video signal is separated into the Y signal for luminance and the PB and PR signals for chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. The component signal is also called the “color difference signal” because the luminance signal is subtracted from the color signal. A monitor with component input jacks is required in order to output component signals. A color space standard supported by HDMI version 1.3. It is a more extensive color space than sRGB, and allows the expression of colors that were not hitherto possible. While remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color space, and can thus produce more vivid, natural images. It is particularly effective for still pictures and computer graphics. Composite video signal With the composite video signal system, the video signal comprises the three basic elements of a video picture: color, brightness and synchronization data. A composite video jack on a video component transmits these three elements combined. Deep Color Deep Color refers to the use of various color depths in displays, up from the 24-bit depths in previous versions of the HDMI specification. This extra bit depth allows HDTVs and other displays increase from millions of colors to billions of colors and eliminate on-screen color banding for smooth tonal transitions and subtle gradations between colors. The increased contrast ratio can represent many times more shades of gray between black and white. Additionally, Deep Color increases the number of available colors within the boundaries defined by the RGB or YCbCr color space. En 53 APPENDIX Information on HDMI™ ■ HDMI signal compatibility NOTES Audio signals Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD, etc. DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc. Bitstream Dolby Digital, DTS DVD-Video, etc. • If the input source component can decode the bitstream audio signals of audio commentaries, you can play back the audio sources with the audio commentaries mixed down by using the digital audio input (optical or coaxial) connections. • Refer to the supplied instruction manuals of the input source component, and set the component appropriately. • When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output, depending on the type of the DVD player. • This unit is not compatible with HDCP-incompatible HDMI or DVI components. • Refer to the supplied instruction manuals for details. To decode audio bitstream signals on this unit, set the input source component appropriately so that the component outputs the bitstream audio signals directly (does not decode the bitstream signals on the component). • This unit is not compatible with the audio commentary features (for example, the special audio contents downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not play back the audio commentaries of the Blu-ray Disc or HD DVD content. Video signals This unit is compatible with the video signals of the following resolutions: – – – – 480i/60 Hz 576i/50 Hz 480p/60 Hz 576p/50 Hz – 720p/60 Hz, 50 Hz – 1080i/60 Hz, 50 Hz – 1080p/60 Hz, 50 Hz, 24 Hz About trademarks Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories. “HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered trademarks of HDMI Licensing LLC. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. ©1996-2008 DTS, Inc. All Rights Reserved. “SILENT CINEMA” is a trademark of Yamaha Corporation. En 54 APPENDIX Specifications ■ HDMI specification • Deep Color • x.v.Color • Auto Lip sync ■ INPUT/OUTPUT Input jacks • HDMI input x 4 • AV input x 5 [Audio] Digital input (optical) x 2, digital input (coaxial) x 2, analog input x 1 [Video] Component video jacks x 2, video jacks x 3 • AUDIO input x 2 [Audio] Analog jack x 2 • VIDEO AUX input x 1 [Audio] Analog x 1, stereo mini jack x 1 [Video] Video jack x 1 Output jacks • TV output (monitor output) x 3 [Audio/Video] HDMI x 1 [Video] Component video jack x 1, video jack x 1 • AV output x 2 [Audio] Analog jack x 1 [Video] Video jack x 1 • AUDIO output x 1 [Audio] Analog jack x 1 ■ AUDIO SECTION • Surround Decoder Dolby Digital, Dolby Pro Logic, Dolby Pro Logic II DTS Digital Surround DSD • Minimum RMS Output Power for Front, Center, Surround [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω) FRONT L/R........................................................................100 W/ch CENTER .................................................................................100 W SURROUND L/R...............................................................100 W/ch [Other models] (1 kHz, 0.9% THD, 6 Ω) FRONT L/R........................................................................100 W/ch CENTER .................................................................................100 W SURROUND L/R...............................................................100 W/ch • Dynamic Power (IHF) [U.S.A. and Canada models] Front Speakers 8/6/4/2 Ω .................................. 110/130/160/180 W [Other models] Front Speakers 6/4/2 Ω ............................................ 105/130/150 W • Maximum Useful Output Power (JEITA) [China, Korea, General and Asia models] 1 kHz, 10% THD, 6 Ω ............................................................135 W • Maximum Output Power [U.K., Europe and Asia models] 1 kHz, 0.7% THD, 4 Ω ...........................................................120 W • IEC Output Power [U.K., Europe and Asia models] Front Speakers 1 kHz, 0.9% THD, 8 Ω .........................95 W+95 W • Dynamic Headroom [U.S.A. and Canada models] 8 Ω.........................................................................................0.23 dB • Input Sensitivity/Input Impedance AV5, etc..................................................................... 200 mV/47 kΩ • Maximum Input Voltage AV5, etc. (1 kHz, 0.5% THD) .....................................2.3 V or more • Rated Output Voltage/Output Impedance AUDIO OUT............................................................ 200 mV/1.2 kΩ SUBWOOFER (2ch Stereo & Front: Small) ............... 1.0 V/1.2 kΩ • Headphone Jack Rated Output/Impedance AV5, etc. (1 kHz, 50 mV, 8 Ω) .................................. 100 mV/470 Ω • Frequency Response AV5 to FRONT ..................................... 10 Hz to 100 kHz, +0/-3 dB • Total Harmonic Distortion AV5, etc. to FRONT [U.S.A. and Canada models] (1 kHz, 50 W, 8 Ω)........ 0.06% or less [Other models] (1 kHz, 50 W, 6 Ω) ............................. 0.06% or less • Signal to Noise Ratio (IHF-A Network) AV5, etc. Input Shorted (250 mV to Front Speakers) ................................................................................. 98 dB or more • Residual Noise (IHF-A Network) Front Speakers ........................................................... 150 µV or less • Channel Separation (1 kHz/10 kHz) AV5, etc. (5.1 kΩ shortened) ...........................60 dB/45 dB or more • Volume Control ...................................... MUTE / -80 dB to +16.5 dB • Tone Control (Front Speakers) BASS Boost/Cut ............................................ ±10 dB/2 dB at 50 Hz BASS Turnover Frequency .................................................... 350 Hz TREBLE Boost/Cut ..................................... ±10 dB/2 dB at 20 kHz TREBLE Turnover Frequency.............................................. 3.5 kHz • Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) H.P.F. (Front, Center, Surround) ....................................... 12 dB/oct. L.P.F. (Subwoofer) ............................................................ 24 dB/oct. ■ VIDEO SECTION • Video Signal Type [U.S.A., Canada, Korea and General models] ........................ NTSC [Other models] ............................................................................PAL • Signal Level Composite ..................................................................... 1 Vp-p/75 Ω Component.......................1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR) • Maximum Input Level (Video Conversion Off) ....... 1.5 Vp-p or more • Signal to Noise Ratio.................................................... 50 dB or more • Frequency Response [MONITOR OUT] Component (Video Conversion Off)............5 Hz to 60 MHz, ±3 dB En 55 APPENDIX ■ FM SECTION ■ AM SECTION • Tuning Range [U.S.A. and Canada models] ...............................87.5 to 107.9 MHz [Asia and General models] ........... 87.5/87.50 to 108.0/108.00 MHz [Other models].................................................87.50 to 108.00 MHz • Tuning Range [U.S.A. and Canada models]...................................530 to 1710 kHz [Asia and General models]..................... 530/531 to 1710/1611 kHz [Other models] ........................................................531 to 1611 kHz • 50 dB Quieting Sensitivity (IHF) Mono..................................................................... 3.0 µV (20.8 dBf) ■ GENERAL • Signal to Noise Ratio (IHF) Mono/Stereo ................................................................. 74 dB/69 dB • Harmonic Distortion (1 kHz) Mono/Stereo ....................................................................... 0.3/0.3% • Antenna Input (unbalanced) .........................................................75 Ω • Power Supply [U.S.A. and Canada models].................................. AC 120 V, 60 Hz [General models]......................... AC 110-120/220-240 V, 50/60 Hz [China model].........................................................AC 220 V, 50 Hz [Korea model] ........................................................ AC 220 V, 60 Hz [Australia model] ................................................... AC 240 V, 50 Hz [U.K. and Europe models] ..................................... AC 230 V, 50 Hz [Asia models] ............................................ AC 220-240 V, 50/60 Hz • Power Consumption [U.S.A. and Canada models] .....................................250 W/320 VA [Other models] ........................................................................ 250 W • Standby Power Consumption [General models] ..........................................................1.0 W or less [Other models] ..............................................................0.5 W or less • Dimensions (W x H x D) 435 x 151 x 315 mm (17-1/8 x 6 x 12-3/8 in) • Weight 7.5 kg (16.5 lbs) * Specifications are subject to change without notice. Index A O Advanced Setup menu ................................................................. 46 AM tuning.................................................................................... 30 Antenna connection ..................................................................... 20 Option menu................................................................................ 34 R C Rear panel...................................................................................... 6 Remote control, Part names and functions.................................... 8 Cable plug .................................................................................... 12 Connections.................................................................................... 9 S E External device connection .......................................................... 12 F FM tuning..................................................................................... 30 Front panel ..................................................................................... 5 Front panel display......................................................................... 7 SCENE function.......................................................................... 26 Setup menu.................................................................................. 36 Sound field program.................................................................... 26 Sound field program parameter setting ....................................... 44 Speaker connection ....................................................................... 9 Speaker setting ............................................................................ 21 Supplied accessories...................................................................... 4 J Jack .............................................................................................. 12 En 56 © 2010 Yamaha Corporation All rights reserved. YC434B0/OMEN2