Yamaha RSio64 de handleiding

Merk: Yamaha

Model: RSio64

Categorie: Aanvullende muziekapparatuur

Type: de handleiding

I/O RACK

Owner’s Manual

AUDIO INTERFACE

Bedienungsanleitung

Mode d’emploi

Manual de instrucciones

Manuale di istruzioni

Руководство пользователя

Manual do Proprietário

EnglishDeutschFrançaisEspañolItalianoРусскийPortuguês

Owner’s Manual

The above warning is located on the top of the unit.

L’avertissement ci-dessus est situé sur le dessus de l’unité.

Explanation of Graphical Symbols

Explication des symboles

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “danger-

ous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une « tension

dangereuse » non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour constituer un risque d’électrocution.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (ser-

vicing) instructions in the literature accompanying the product.

Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’instructions

importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation fournie.

IMPORTANT SAFETY

INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong are provided for your safety. If the pro-

vided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain

or moisture, does not operate normally, or has been dropped.

(UL60065_03)

PRÉCAUTIONS CONCER-

NANT LA SÉCURITÉ

1 Lire ces instructions.

2 Conserver ces instructions.

3 Tenir compte de tous les avertissements.

4 Suivre toutes les instructions.

5 Ne pas utiliser ce produit à proximité d’eau.

6 Nettoyer uniquement avec un chiffon propre et sec.

7 Ne pas bloquer les orifices de ventilation. Installer l’appareil confor-

mément aux instructions du fabricant.

8 Ne pas installer l’appareil à proximité d’une source de chaleur comme

un radiateur, une bouche de chaleur, un poêle ou tout autre appareil (y

compris un amplificateur) produisant de la chaleur.

9 Ne pas modifier le système de sécurité de la fiche polarisée ou de la

fiche de terre. Une fiche polarisée dispose de deux broches dont une

est plus large que l’autre. Une fiche de terre dispose de deux broches

et d’une troisième pour le raccordement à la terre. Cette broche plus

large ou cette troisième broche est destinée à assurer la sécurité de

l’utilisateur. Si la fiche équipant l’appareil n’est pas compatible avec

les prises de courant disponibles, faire remplacer les prises par un

électricien.

10 Acheminer les cordons d’alimentation de sorte qu’ils ne soient pas

piétinés ni coincés, en faisant tout spécialement attention aux fiches,

prises de courant et au point de sortie de l’appareil.

11 Utiliser exclusivement les fixations et accessoires spécifiés par le

fabricant.

12 Utiliser exclusivement le chariot, le stand, le tré-

pied, le support ou la table recommandés par le

fabricant ou vendus avec cet appareil. Si l’appa-

reil est posé sur un chariot, déplacer le chariot

avec précaution pour éviter tout risque de chute

et de blessure.

13 Débrancher l’appareil en cas d’orage ou lorsqu’il

doit rester hors service pendant une période prolongée.

14 Confier toute réparation à un personnel qualifié. Faire réparer l’appa-

reil s’il a subi tout dommage, par exemple si la fiche ou le cordon d’ali-

mentation est endommagé, si du liquide a coulé ou des objets sont

tombés à l’intérieur de l’appareil, si l’appareil a été exposé à la pluie ou

à de l’humidité, si l’appareil ne fonctionne pas normalement ou est

tombé.

(UL60065_03)

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

AVERTISSEMENT

POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE ÉLEC-

TRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ.

Owner’s Manual

이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로

하며, 모든 지역에서 사용할 수 있습니다.

(class b korea)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modifications

not expressly approved by Yamaha may void your authority,

granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with

the requirements listed in FCC Regulations, Part 15 for Class “B”

digital devices. Compliance with these requirements provides a

reasonable level of assurance that your use of this product in a

residential environment will not result in harmful interference with

other electronic devices. This equipment generates/uses radio

frequencies and, if not installed and used according to the

instructions found in the users manual, may cause interference

harmful to the operation of other electronic devices. Compliance

with FCC regulations does not guarantee that interference will

not occur in all installations. If this product is found to be the

source of interference, which can be determined by tur

ning the

unit “OFF” and “ON”, please try to eliminate the problem by using

one of the following measures:

Relocate either this product or the device that is being affected

by the interference.

Utilize power outlets that are on different branch (circuit breaker

or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change

the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type

of product. If you can not locate the appropriate retailer, please

contact Yamaha Corporation of America, Electronic Service Divi-

sion, 6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed

by Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Audio Interface

Model Name : RSio64-D

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference that may

cause undesired operation.

See user manual instructions if interference to radio reception is suspected.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC)

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

WARNING: THIS APPARATUS MUST BE EARTHED IMPORTANT. The wires in this

mains lead are coloured in accordance with the following code:

GREEN-AND-YELLOW : EARTH

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with

the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in

the plug which is marked by the letter E or by the safety earth symbol or colored

GREEN or GREEN-and-YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked

with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

(3 wires)

In Finland: Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.

In Norway: Apparatet må tilkoples jordet stikkontakt.

In Sweden: Apparaten skall anslutas till jordat uttag.

(class I hokuo)

Owner’s Manual

Contents

PRECAUTIONS. . . . . . . . . . . . . . . . . . .5

Introduction 8

Features....................................................... 8

Precautions for Rack Mounting .................... 8

Firmware Updates........................................ 8

Controls and Functions 9

Front Panel .................................................. 9

Rear Panel.................................................. 12

Connections 14

Installing a Mini-YGDAI card ...................... 14

About Dante.............................................. 14

Notes Regarding the Use of

Network Switches ................................. 15

About Dante Controller ............................. 15

Connecting AC Power................................ 15

Power on and off ....................................... 15

Specifying the audio routing 16

Editing the user pattern ............................. 17

About R Remote V4 ................................... 17

About the number of

input/output channels........................... 17

Word Clock 18

Selecting a word clock source .................... 18

About word clock ...................................... 18

SRC (Sampling Rate Converter). . . .18

Other functions 19

Remote control.......................................... 19

IDENTIFY ................................................... 19

Panel lock .................................................. 19

Initializing the RSio64-D............................. 20

Updating the RSio64-D’s

hardware settings.................................. 20

If you are using the card’s SRC................... 20

Troubleshooting . . . . . . . . . . . . . . . 21

Messages 22

Error Messages........................................... 22

Warning Messages ..................................... 23

Information Messages ................................ 23

Specifications . . . . . . . . . . . . . . . . 166

Dimensions . . . . . . . . . . . . . . . . . . 167

Block Diagram . . . . . . . . . . . . . . . 168

Various settings

Specifying the RSio64-D’s word clock...........18

Specifying the audio routing ........................16

Specifying the ID that

distinguishes the RSio64-D ......................10

Specifying the UNIT ID range .......................10

Specifying how the IP address is set..............10

Specifying the type of

connection to the Dante network ............11

Initializing the RSio64-D ...............................20

Specifying the SRC word clock .....................11

Included items (please check)

•Owner’s manual

•Power cord

Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY

BEFORE PROCEEDING

Please keep this manual in a safe place for

future reference.

WARNING

Always follow the basic precautions listed below to

avoid the possibility of serious injury or even death

from electrical shock, short-circuiting, damages, fire

or other hazards. These precautions include, but are

not limited to, the following:

Power supply/power cord

• Do not place the power cord near heat sources such as

heaters or radiators, and do not excessively bend or

otherwise damage the cord, place heavy objects on it, or

place it in a position where anyone could walk on, trip over,

or roll anything over it.

• Only use the voltage specified as correct for the device.

The required voltage is printed on the name plate of the

device.

• Use only the supplied power cord/plug.

If you intend to use the device in an area other than in the

one you purchased, the included power cord may not be

compatible. Please check with your Yamaha dealer.

• Check the electric plug periodically and remove any dirt or

dust which may have accumulated on it.

• When setting up the device, make sure that the AC outlet

you are using is easily accessible. If you feel that a

malfunction has occurred, immediately turn off the power,

unplug the power cord plug from the electrical outlet, and

also disconnect the connected power supply from the EXT

DC INPUT jack. Even when the power switch is turned off,

as long as the power cord is not unplugged from the wall

AC outlet, the device will not be disconnected from the

power source.

• Be sure to connect to an appropriate outlet with a

protective grounding connection. Improper grounding can

result in electrical shock, damage to the device(s), or even

fire.

Do not open

• This device contains no user-serviceable parts. Do not

open the device or attempt to disassemble the internal

parts or modify them in any way. If it should appear to be

malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

Water warning

• Do not expose the device to rain, use it near water or in

damp or wet conditions, or place on it any containers (such

as vases, bottles or glasses) containing liquids which might

spill into any openings. If any liquid such as water seeps

into the device, turn off the power immediately and unplug

the power cord from the AC outlet. Then have the device

inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

Fire warning

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

If you notice any abnormality

• When one of the following problems occur, immediately

turn off the power switch and disconnect the electric plug

from the outlet. Then have the device inspected by Yamaha

service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the device.

- There is a sudden loss of sound during use of the device.

• If this device should be dropped or damaged, immediately

turn off the power switch, disconnect the electric plug from

the outlet, and have the device inspected by qualified

Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to

avoid the possibility of physical injury to you or

others, or damage to the device or other property.

These precautions include, but are not limited to, the

following:

Power supply/power cord

• When removing the electric plug from the device or an

outlet, always hold the plug itself and not the cord. Pulling

by the cord can damage it.

• Remove the electric plug from the outlet when the device is

not to be used for extended periods of time, or during

electrical storms.

Location

• Do not place the device in an unstable position where it

might accidentally fall over.

• Do not block the vents. This device has ventilation holes at

the front/sides to prevent the internal temperature from

becoming too high. In particular, do not place the device

on its side or upside down. Inadequate ventilation can

result in overheating, possibly causing damage to the

device(s), or even fire.

• When installing the device:

- Do not cover it with any cloth.

- Do not install it on a carpet or rug.

- Make sure the top surface faces up; do not install on its

sides or upside down.

- Do not use the device in a confined, poorly-ventilated

location.

Inadequate ventilation can result in overheating, possibly

causing damage to the device(s), or even fire.

• Do not place the device in a location where it may come

into contact with corrosive gases or salt air. Doing so may

result in malfunction.

• Before moving the device, remove all connected cables.

PA_en_4 1/2

Owner’s Manual

• When setting up the device, make sure that the AC outlet

you are using is easily accessible. If some trouble or

malfunction occurs, immediately turn off the power switch

also disconnect the unit from the power supply that is

connected to the EXT DC INPUT jack. Even when the

power switch is turned off, electricity is still flowing to the

product at the minimum level. When you are not using the

product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• If the device is mounted in an EIA standard rack, carefully

read the section “Precautions for Rack Mounting” on page

8. Inadequate ventilation can result in overheating,

possibly causing damage to the device(s), malfunction, or

even fire.

Connections

• Before connecting the device to other devices, turn off the

power for all devices. Before turning the power on or off for

all devices, set all volume levels to minimum.

Maintenance

• Periodically inspect and clean the air filter of the front panel

ventilation opening (page 11). Dust and dirt can seriously

degrade the effectiveness of the cooling fan and result in

malfunction or fire.

• Remove the power plug from the AC outlet when cleaning

the device.

Handling caution

• Do not insert your fingers or hands in any gaps or openings

on the device (vents).

• Avoid inserting or dropping foreign objects (paper, plastic,

metal, etc.) into any gaps or openings on the device (vents,

etc.) If this happens, turn off the power immediately and

unplug the power cord from the AC outlet. Then have the

device inspected by qualified Yamaha service personnel.

• Do not rest your weight on the device or place heavy

objects on it, and avoid use excessive force on the buttons,

switches or connectors.

NOTICE

To avoid the possibility of malfunction/ damage to the product,

damage to data, or damage to other property, follow the

notices below.

 Handling and maintenance

• Do not use the device in the vicinity of a TV, radio, stereo

equipment, mobile phone, or other electric devices. Other-

wise, the device, TV, or radio may generate noise.

• Do not expose the device to excessive dust or vibration, or

extreme cold or heat (such as in direct sunlight, near a

heater, or in a car during the day), in order to prevent the

possibility of panel disfiguration, unstable operation, or

damage to the internal components.

• Do not place vinyl, plastic or rubber objects on the device,

since this might discolor the panel.

• When cleaning the device, use a dry and soft cloth. Do not

use paint thinners, solvents, cleaning fluids, or chemical-

impregnated wiping cloths.

• Condensation can occur in the device due to rapid, drastic

changes in ambient temperature—when the device is

moved from one location to another, or air conditioning is

turned on or off, for example. Using the device while con-

densation is present can cau

se damage. If there is reason

believe that condensation might have occurred, leave

the device for several hours without turning on the power

until the condensation has completely dried out.

•Always turn the power off when the device is not in use.

Information

 About this manual

• The illustrations as shown in this manual are for instruc-

tional purposes only.

• The company names and product names in this manual

are the trademarks or registered trademarks of their

respective companies.

Yamaha cannot be held responsible for damage caused

by improper use or modifications to the device, or data

that is lost or destroyed.

PA_en_4 2/2

Owner’s Manual

(weee_eu_en_01)

European Models

Purchaser/User Information specified in EN55103-1:2009 and EN55103-2:2009.

Inrush Current: 1.0A (on initial switch-on)

1.0A (after a supply interruption of 5s)

Conforms to Environments: E1, E2, E3 and E4

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical

and electronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection

points, in accordance with your national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any poten-

tial negative effects on human health and the environment which could otherwise arise from inappropri-

ate waste handling.

For more information about collection and recycling of old products, please contact your local municipal-

ity, your waste disposal service or the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equip

ment, please contact your dealer or supplier for fur-

ther information.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, please contact your

local authorities or dealer and ask for the correct method of disposal.

The model number, serial number, power requirements, etc., may be found on or

near the name plate, which is at the top of the unit. You should note this serial

number in the space provided below and retain this manual as a permanent

record of your purchase to aid identification in the event of theft.

Model No.

Serial No.

(rear_en_01)

Owner’s Manual

Introduction

Thank you for choosing the Yamaha RSio64-D audio

interface.

To take full advantage of the superior functions and

performance offered by the RSio64-D, and to enjoy years of

trouble-free use, be sure to read this owner’s manual

carefully before operation.

Features

The RSio64-D is an interface that can be used as a router

and format converter between Dante and Mini-YGDAI

cards.

This allows Mini-YGDAI cards that support a wide variety

of input/output formats and processing to be connected to

a Dante network, meeting the needs of various types of

systems including broadcast, live, recording, and post-

production. In addition, the settings of the RSio64-D can

be fully controlled from a CL or QL series console.

• A wide variety of Mini-YGDAI cards can be used,

including processing cards as well as input/output cards.

• Each MY slot provides an SRC (Sampling Rate

Converter) to allow digital connection between differing

word clock routes.

• Seven different widely usable routing patterns are preset,

including routing between Mini-YGDAI cards. Matrix

patching from R Remote V4 or a CL/QL console.

• EXT DC INPUT supports redundant power supplies.

• Dante redundancy (primary/secondary) is supported.

NOTE

Before you install Mini-YGDAI cards in slots 1–4, you must

check the Yamaha website to determine whether the card is

compatible with the RSio64-D, and to verify the total number

of Yamaha or third-party cards that can be installed in

combination with that card.

Yamaha website:

http://www.yamahaproaudio.com/

Precautions for Rack

Mounting

This unit is rated for operation at ambient temperatures

ranging from 0 to 40 degrees Celsius. When mounting the

unit with other RSio unit(s) or other device(s) in an EIA

standard equipment rack, internal temperatures can

exceed the specified upper limit, resulting in impaired

performance or failure. When rack mounting the unit,

always observe the following requirements to avoid heat

buildup:

• When mounting the unit in a rack with devices such as

power amplifiers that generate a significant amount of

heat, leave more than 1U of space between the RSio and

other equipment. Also either leave the open spaces

uncovered or install appropriate ventilating panels to

minimize the possibility of heat buildup.

• To ensure sufficient airflow, leave the rear of the rack

open and position it at least 10 centimeters from walls or

other surfaces. If you’ve installed a fan kit, there may be

cases in which closing the rear of the rack will produce a

greater cooling effect. Refer to the rack and/or fan unit

manual for details.

Firmware Updates

This product enables you to update the unit firmware to

improve operations, add functions, and correct possible

malfunctions. The following two types of firmware are

available for the unit:

•Unit’s firmware

•Dante module firmware

Firmware updates are performed from R Remote V4.

Details on updating the firmware are available on the

following website:

http://www.yamahaproaudio.com/

For information on updating the unit, refer to the firmware

update guide available on the website.

NOTE

It is necessary to update other devices depending on the

version of each device in the Dante network. For details,

refer to the firmware compatibility available on the Yamaha

website.

http://www.yamahaproaudio.com/

Owner’s Manual

Controls and Functions

Front Panel

q SLOT 1–4 [LOCK] indicators

These indicate the word clock status of slots 1–4. The

indicator is lit green if operation is normal.

NOTE

• If the SLOT1–4 [LOCK] indicators and the SLOT1–4 [SRC]

indicators and all WORD CLOCK indicators simultaneously

flash red at startup, overcurrent has occurred in a Mini-

YGDAI card, or a malfunctioning Mini-YGDAI card is

installed. Turn off the power and remove the card that is

causing the problem.

• If the SLOT1–4 [LOCK] indicators and the SLOT1–4 [SRC]

indicators alternately flash red at startup, the hardware

settings of the RSio64-D need to be updated (page 20).

• If the SLOT1–4 [LOCK] indicators sequentially light green in

the order of 1–4 at startup, the clocks of the slots are

synchronizing. This may take several tens of seconds.

w SLOT 1–4 [SRC] indicators

These indicate the SRC (Sampling Rate Converter)

status of slots 1–4.

NOTE

The SRC clock sent to a Mini-YGDAI card installed in a slot

is selected by the SRC WCLK DIP switch (page 11).

e SLOT 1–4 [SRC] keys

For each slot, these turn SRC on/off for the slot’s input

as well as output.

12345678

1234

o!0r!3 tyq!3

we u i !1 !2

Unlit

No card is installed in the slot, or an unsup-

ported card is installed.

Green (lit)

LOCK

This indicates that a clock synchronized with

the clock source selected by the WORD

CLOCK select key is being input from the card.

If an external device is connected to the corre-

sponding slot, input/output is occurring cor-

rectly between that device and the RSio64-D.

If the sampling frequency is close, this status

is shown in some cases even if not synchro-

nized.

Green

(flashing)

SYNC

ERROR

A valid clock is being input from the card, but is

not synchronized with the clock source

selected by the WORD CLOCK select key. If

an external device is connected to the corre-

sponding slot, input/output is not occurring

correctly between that device and the RSio64-

D. Input/output will occ

ur c

orrectly if SRC is

turned ON.

Red (lit)

UNLOCK

A valid clock is not being input from the card. If

an external device is connected to the corre-

sponding slot, input/output cannot occur cor-

rectly between that device and the RSio64-D.

Red

(flashing)

WRONG

WORD

CLOCK

The frequency of the clock source selected by

the WORD CLOCK select key is outside the

range of operating frequencies of the card

installed in the slot. Either set the frequency of

the clock source to be within the operating

range of the card, or turn SRC on. In the case

of an analog card, turning SRC on makes the

card operate at the RSio64-D’s internal fre-

quency of 48 kHz.

Unlit SRC is off.

Green (lit)

SRC is on, and the clock selected by the SRC

WCLK DIP switch is being input correctly.

Red (lit)

SRC is on, but an appropriate clock is not

being input. It may be that the clock selected

by the SRC WCLK DIP switch is not being

input, or is outside the operating range. Either

turn SRC off, or change the setting of the DIP

switch.

Owner’s Manual

Controls and Functions

r WORD CLOCK select key

Selects the word clock source of the RSio64-D.

WORD CLOCK [WCLK IN] indicator

WORD CLOCK [SLOT1 1/2] indicator

WORD CLOCK [DANTE] indicator

These indicate the status of the RSio64-D’s word clock

source.

*1 When this is flashing, the unit uses the Dante word clock to

operate and perform input/output.

*2 In order to use MY8-AEB, set AE  RSVD switch to the

RSVD position.

*3 If you want to change the frequency of the Dante word

clock, use Dante Controller.

t ROUTING [PATTERN] rotary switch

This selects the RSio64-D’s internal audio routing

pattern from seven preset patterns and one user

pattern. Setting the rotary switch to 1–7 selects preset

routing patterns 1–7, and setting it to 0 selects the user

routing pattern.

NOTE

The routing pattern does not change if you select 8–F.

y SETUP [UNIT ID] rotary switch

Specifies an ID that identifies this device on the Dante

network. If there are multiple Dante-compatible

devices from Yamaha that require an ID setting

connected to the same network, set a different ID for

each device.

u Device setting DIP switches

These switches specify startup settings for the device.

Details are given below.

The switch illustrations indicate the setting state as

follows.

•Switch 1 (UNIT ID)

This switch setting determines whether the [UNIT ID]

setting will range from hexadecimal 00 to 0F or from 10

to 1F.

• Switch 2/Switch 3 (IP SETTING)

These specify the method of setting the IP address used

when communicating with an external device such as R

Remote V4. When connecting the RSio64-D to a

computer for the first time immediately after purchase,

set this to something other than STATIC IP (MANUAL).

If you want to set this to STATIC IP (MANUAL), first

specify the IP address from R Remote V4 and then

switch this setting to STATIC IP (MANUAL).

WCLK IN

This is lit if the RSio64-D is using the word

clock that is being input from the rear panel

[WORD CLOCK IN] connector. This flashes if

there is no valid word clock input

SLOT1 1/2

This is lit if the channel 1/2 word clock of slot 1

is being used. This flashes if there is no valid

word clock input

. The channel 7/8 word clock

is used when using the MY8-AEB

. If the

SRC on the MY8-AE96S is in use, you will be

unable to use the input signal as word clock.

DANTE

This is lit if the Dante network’s word clock

is being used. (If no valid Dante signal is being

input, the clock generated by the internal

Dante module is used.)

Making the setting

You can select the routing pattern even when the

power is on. Your selection is applied three seconds

after you switch the routing pattern.

Making the setting

Turn off the power before you change the setting of

this rotary switch. The setting is applied the next

time you turn the power on. If you change the

setting while the power is on, the changed setting is

not applied until the power is turned off and on

again.

Making the setting

Turn off the power before you change these DIP

switch settings. The setting is applied the next time

you turn the power on. If you change the setting

while the power is on, the changed setting is not

applied until the power is turned off and on again.

(This note does not apply to switch 6.)

Switch State

Switch is in the upward (OFF) position.

Switch is in the downward (ON) position.

Switch Setting Description

UNIT ID =

00-0F

The UNIT ID setting range is 00

to 0F.

UNIT ID =

10-1F

The UNIT ID setting range is 10

to 1F.

Switch Setting Description

AUTO IP

The Dante network automati-

cally specifies the IP address as

169.254.XX.XX.

DHCP

The IP address assigned from

the DHCP server is used.

STATIC IP

(AUTO)

The IP address is specified as

192.168.0.xx (xx=UNIT ID).

STATIC IP

(MANUAL)

The IP address is specified from

an external device such as R

Remote V4.

12345678

UNIT ID

IP SETTING

SECONDARY PORT

START UP MODE

Owner’s Manual

Front Panel

NOTE

• If the network consists only of Dante devices and R Remote

V4, we recommend that you set this to AUTO IP.

• If connecting to an existing network, select DHCP as

necessary.

• If you want to use zoning to specify the IP address, or if you

want to connect to an existing network and fix the IP

address, use R Remote V4 to specify the IP address and

then set this to STATIC IP (MANUAL).

• Switch 4 (SECONDARY PORT)

This switch setting determines whether the rear-panel

[SECONDARY] connector will be used for a daisy

chain or redundant network.

If this is set to [DAISY CHAIN], you can connect

multiple Dante-enabled network devices in a daisy

chain without using a network switch.

With the [REDUNDANT] setting, the [PRIMARY]

connector will be used for primary connections, and

the [SECONDARY] connector will be used for

secondary (backup) connections. This provides a

redundant connection so that if the unit is unable to

transmit signals through the [PRIMARY] connector

for some reason (e.g., due to damage or accidental

removal of the cable, or a failed network switch), the

[SECONDARY] connector will automatically take over

communications.

•Switch 5

Not used. Leave these in the factory-set position

(upward).

•Switch 6

This switch position specifies the SRC to be used: one

on the main unit or one on the MY8-AE96S card. If you

are using a card other than MY8-AE96S, the SRC will

always be used on the main unit regardless of the switch

position.

NOTE

If SRC on the MY8-AE96S card is used, the input and output

of the unit’s SRC will be disabled, and the main unit’s word

clock will be used as the card’s SRC clock regardless of the

switch position.

• Switch 7/Switch 8 (START UP MODE)

These switches specify the start-up mode.

i SRC WCLK DIP switches

These select the word clock of each slot’s SRC (SLOT/

WORD CLOCK IN). DIP switches 1–4 correspond to

SLOT 1–4. When a DIP switch is off, the word clock of

the corresponding slot is used. When a DIP switch is

on, the signal of WORDCLOCK IN is used as the SRC

word clock.

NOTE

• The setting of these DIP switches is applied three seconds

after they are switched while the power is on.

• If an analog Mini-YGDAI card is installed and the

corresponding slot’s SRC is turned on, that slot uses the

RSio64-D’s internal 48 kHz clock.

o Dante [SYSTEM] indicators

These indicate the operating status of the unit. If the

green indicator lights steadily and the red indicator

turns off, the unit is operating normally.

When power to the unit is turned ON, if the green

indicator turns off, or if the red indicator lights or

flashes, the unit is not functioning properly. In this case,

refer to “Messages” (page 22).

!0 Dante [SYNC] indicators

These indicate the sync status between the Dante

network and this unit. If the green indicator lights, the

unit is operating as a word clock slave and synching to

the word clock.

If the green indicator flashes, the unit is operating as the

word clock master.

If the unit is powered-on but the green indicator is

unlit, a malfunction has occurred. In this case, refer to

“Messages”(page 22).

Also refer to “Messages” if the orange indicator is lit or

flashing.

!1 POWER INT indicator

Indicates whether the AC IN power supply is powered.

If the power switch is off, this indicator is unlit

regardless of whether power is supplied to AC IN.

!2 POWER EXT indicator

Indicates whether the EXT DC INPUT power supply is

powered. This is lit if the EXT DC INPUT power supply

is powered. This indicator is not affected by the state of

the power switch.

!3 Cooling vents

To prevent the interior temperature from becoming

excessive, two cooling vents are provided on the front

panel. Air filters are installed inside the cooling vents to

prevent dust from entering the unit through the vents.

• Cleaning the cooling vents

After extended use, dust may accumulate on the

cooling vents, obstructing the airflow. If dust

accumulates, remove it periodically by placing a

vacuum cleaner gently over the cooling vents.

Switch Settings Description

DAISY CHAIN

The [SECONDARY] connector

is used for a daisy chain con-

nection. A signal at the [PRI-

MARY] connector will be

transmitted to the next device in

the chain as is.

REDUNDANT

The [SECONDARY] connector

is used for a redundant net-

work. It will function as backup

connection, independent of the

network to which the [PRI-

MARY] connector is connected.

Switch Settings Description

NORMAL The main unit’s SRC is used.

CARD The card’s SRC is used.

Switch Settings Description

NORMAL

Start up normally with the set-

tings of the previous start-up.

INITIALIZE

Initialize the settings. For details

on the settings that are initial-

ized, refer to “Initializing the

RSio64-D” (page 20).

Owner’s Manual

Controls and Functions

Rear Panel

q [ ]/[ ] (power switch)

Turns the unit’s power (supplied from the AC IN

connector) on [ ]/off [ ]. If power is supplied from

the AC IN connector and this power switch is also on,

the front panel POWER INT indicator is lit.

CAUTION

Even when the power switch is turned off, a small amount of

current is flowing through the unit. When you are not using

the product for a long time, make sure to unplug the power

cord from the AC outlet.

NOTE

Rapidly turning the unit on and off in succession can cause

it to malfunction. After turning the unit off, wait for at least 6

seconds before turning it on again.

w AC IN connector

Connect the supplied AC power cord here. First

connect the AC power cord to the RSio unit, then insert

the power cord plug into an AC power outlet.

The supplied AC power cord features a V-lock

mechanism via a latch, which prevents the power cord

from coming off accidentally.

Insert the cable plug all the way until it locks in securely.

CAUTION

Be sure to turn the power off before connecting or

disconnecting the power cord.

Press the latch button on the plug to disconnect the

power cord.

e EXT DC INPUT connector

This is an XLR-4-32 type connector through which an

external power supply (+24V) can be provided as a

backup for the internal power supply of the RSio64-D.

CAUTION

Before connecting the external power supply, you must turn

off the power of this unit and the power of the external power

supply. Malfunctions or electrical shock may occur if you fail

to observe this caution.

NOTE

• This power supply cannot be turned on/off by the power

switch.

• If an external power supply is connected, the RSio64-D will

operate normally when the internal and external power

supplies are both on, as well as when only one of them is on.

• If both power supplies are on and one of the power supplies

fails during operation, the unit automatically switches to the

other power supply. The state of the power supply is shown

by the front panel POWER indicator.

r Grounding screw

Since the included power cord has a three-conductor

plug, this unit is appropriately grounded if the AC

outlet is grounded. In some cases, you may be able to

reduce hum and interference by connecting ground to

this screw as well.

t SLOT 1–4

Mini-YGDAI I/O cards can be installed in these slots.

Each of the four slots is equipped with an SRC.

y SLOT ACTIVE indicator

Indicates whether the slots are powered.

CAUTION

Do not insert or remove a Mini-YGDAI card if this indicator is

lit. Malfunctions or electrical shock may occur if you fail to

observe this caution.

qe u oyw

ri!0

Owner’s Manual

Rear Panel

u WORD CLOCK IN connector

This is a BNC connector used to receive word clock

signals. The WORD CLOCK IN connector is internally

terminated with 75Ω.

i Dante [PRIMARY] connector

Dante [SECONDARY] connector

These etherCON (RJ45) connectors allow connection

with Dante devices such as a CL series console using

standard Ethernet cables (CAT5e or better

recommended).

NOTE

• Use STP (Shielded Twisted Pair) cable to prevent

electromagnetic interference. Make sure that the metal

parts of the plugs are electrically connected to the STP

cable shield by conductive tape or comparable means.

• Connect only Dante-compatible devices or Gigabit Ethernet

compatible devices (including compu ters).

•Cables up to 100 meters* long can be used.

*Maximum usable length varies according to the cable

used.

o Dante [PRIMARY LINK/ACT] indicator

Dante [PRIMARY 1G] indicator

Dante [SECONDARY LINK/ACT] indicator

Dante [SECONDARY 1G] indicator

Displays the transmission status with the Dante

network.

!0 Exhaust vent

The RSio64-D is equipped with a cooling fan. Air is

exhausted through this vent, so take care that it is not

blocked by any obstruction.

LINK/ACT

These indicators flash rapidly if the Ethernet

cables are connected properly.

These indicators are lit when the Dante net-

work is functioning as Gigabit Ethernet.

Exhaust vent

Owner’s Manual

Connections

Installing a Mini-YGDAI card

Before you install I/O cards in slots 1–4, you must check the

Yamaha website to determine whether the card is

compatible with the RSio64-D, and to verify the total

number of Yamaha or third-party cards that can be

installed in combination with that card.

Yam a ha website :

http://www.yamahaproaudio.com/

To install an optional mini-YGDAI card, proceed as

follows.

1. Make sure that the power is turned off.

CAUTION

Before installing a Mini-YGDAI I/O card in this unit, you must

turn off the power of this unit and the power of the external

power supply. You must also verify that the SLOT ACTIVE

indicator is unlit. Malfunctions or electrical shock may occur

if you fail to observe this caution.

2. Loosen the screws that hold the slot cover in

place, and remove the slot cover.

Keep the removed slot cover and screws in a safe place.

3. Align the two edges of the card with the guide

rails inside the slot, and insert the card into the

slot.

Push the card all the way into the slot until the

connector of the card is correctly inserted into the

connector inside the slot.

4. Secure the card using the screws that are

attached to the card.

If the card is not secured, malfunction or faulty

operation may occur.

About Dante

Dante is a network audio protocol developed by Audinate.

It is designed to deliver multi-channel audio signals at

various sampling and bit rates, as well as device control

signals over a Gigabit Ethernet (GbE) network.

Visit the Audinate website for more details on Dante:

http://www.audinate.com/

More information on Dante is also posted on the Yamaha

Pro Audio website:

http://www.yamahaproaudio.com/

Slot cover

Card

Owner’s Manual

Notes Regarding the Use of Network Switches

Notes Regarding the Use of

Network Switches

We recommend a gigabit-compatible network switch that

provides functions for controlling and monitoring the

network (such as QoS).

Do not use the EEE functionality (*) of network switches

on a Dante network.

Although mutual power consumption settings between

switches that support the EEE functionality are adjusted

automatically, there are some switches for which such

mutual settings are not adjusted correctly.

This may cause EEE to be enabled in Dante networks when

it is not appropriate, resulting in poor synchronization

performance and occasional dropouts.

Therefore we strongly recommend the following.

• If you use managed switches, please disable the EEE

functionality. Do not use switches that prevent EEE

functionality from being disabled.

• When using unmanaged switches, do not use switches

that support EEE functionality. EEE functionality cannot

be disabled for such switches.

* EEE (Energy Efficient Ethernet) is a technology that

reduces switch power consumption during periods of low

network traffic. It is also referred to as Green Ethernet and

IEEE802.3az.

About Dante Controller

Dante Controller is a software application that allows

configuration and audio routing of Dante networks. Use

this application if you plan to connect or set up Dante-

enabled devices that do not feature RSio64-D-native

support. Please download the Dante Controller application

from the website listed below.

Please note that Dante Controller Version 3.2.1 or later

supports RSio64-D.

http://www.yamahaproaudio.com/

To run Dante Controller, a computer must feature a GbE-

compatible Ethernet connector.

Refer to the Dante Controller owner’s manual for details on

Dante Controller.

Connecting AC Power

1. Turn the unit off.

2. Connect the plug on the AC power cord to the

AC IN connector on the rear panel of the unit.

3. Connect the other side of the plug on the AC

power cord to a power supply socket.

NOTE

• When removing the AC power cord, perform these steps in

reverse.

• Press the latch button on the plug to disconnect the power

cord.

WARNING

• The RSio64-D has been designed assuming it a proper

ground connection is used. To prevent electrical shock and

damage to devices, use the included AC power cord to

create a secure ground connection. If you do not know how

to make a proper ground connection, contact your Yamaha

dealer.

•Be sure to use only the included power cord with this unit.

Use of a different power cord could result in abnormal heat

and electrical shock.

CAUTION

•Be sure to turn the power off before connecting or

disconnecting the power cord.

•Even when the power switch is turned off, a small amount of

current is flowing through the unit. When you are not using

the product for a long time, make sure to unplug the power

cord from the power supply outlet.

Power on and off

To prevent loud sounds that might harm your hearing or

damage equipment downstream, poweron each unit in the

order of the signal flow. When turning the power off,

reverse this order.

Owner’s Manual

Specifying the audio routing

Specifying the

audio routing

The RSio64-D provides seven preset patterns of audio

routing that connect each slot to the Dante network. There

is also one user pattern (page 17) which the user can edit.

Use the front panel ROUTING

[PATTERN] rotary switch to select the

routing.

Setting the rotary switch to 1–7 selects

preset routing patterns 1–7, and setting

it to 0 selects the user routing pattern.

The preset routing patterns are described below.

 PATTERN 1

Dante is connected one-to-one with each slot’s input/

output.

 PATTERN 2

The inputs of slot 1 are distributed to the outputs of

slots 2–4.

 PATTERN 3

The inputs of slot 1 are distributed to the outputs of slot

2, and the inputs of slot 3 are distributed to the outputs

of slot 4.

 PATTERN 4

The inputs and outputs of Slots 1 and 2, and Slots 3 and

4 are interconnected.

 PATTERN 5

Dante inputs 1–16* are distributed to the outputs of

each slot.

 PATTERN 6

Dante inputs 1–16* are distributed to the outputs of

slots 1 and 2, and Dante inputs 17–32* are distributed

to the outputs of slots 3 and 4.

 PATTERN 7

Dante 1–32* and slots 1–2 are connected one-to-one,

and the inputs and outputs of slots 3 and 4 are

connected respectively to each other.

*At 48/44.1 kHz

NOTE

• If the inputs/outputs of an installed Mini-YGDAI card cannot

be assigned in 16-channel units, such as for a 4-channel or

a 8-channel card, audio routing signals from such card are

muted by the slot (e.g., if the Mini-YGDAI card is an 8-

channel card, channels 9–16 are muted).

• For different sampling frequencies, the channels of the

routing pattern are switched automatically, as shown above.

However if SRC is on, the number of the slot’s channels may

change, so there may be cases in which you are unable to

use the above patterns as you would like. In such cases, use

the user pattern.

For example when the sampling frequency is 88.2/96 kHz,

Dante channels 1–8, 9–16, 17–24, and 25-32 are available,

but if SRC is on

for SLOT 1, and the sampling frequency of

that slot is 44.1/48 kHz, then channels 1–16 are available for

SLOT 1.

Making the setting

You can select the routing pattern even when the power

is on. Your selection is applied three seconds after you

switch the routing pattern.

1-16

1-8

48k/44.1k

96k/88.2k 1-8 1-8 1-8

1-16 1-16 1-16

SLOT 1 SLOT 2 SLOT 3 SLOT 4

1-16

1-8

48k/44.1k

96k/88.2k 9-16 17-24 25-32

17-32 33-48 49-64

Dante

1-16

1-8

48k/44.1k

96k/88.2k 1-8 1-8 1-8

1-16 1-16 1-16

SLOT 1 SLOT 2 SLOT 3 SLOT 4

1-16

1-8

48k/44.1k

96k/88.2k 9-16 17-24 25-32

17-32 33-48 49-64

Dante

1-16

1-8

48k/44.1k

96k/88.2k 1-8 1-8 1-8

1-16 1-16 1-16

SLOT 1 SLOT 2 SLOT 3 SLOT 4

1-16

1-8

48k/44.1k

96k/88.2k 9-16 17-24 25-32

17-32 33-48 49-64

Dante

1-16

1-8

48k/44.1k

96k/88.2k 1-8 1-8 1-8

1-16 1-16 1-16

SLOT 1 SLOT 2 SLOT 3 SLOT 4

1-16

1-8

48k/44.1k

96k/88.2k 9-16 17-24 25-32

17-32 33-48 49-64

Dante

1-16

1-8

48k/44.1k

96k/88.2k 1-8 1-8 1-8

1-16 1-16 1-16

SLOT 1 SLOT 2 SLOT 3 SLOT 4

1-16

1-8

48k/44.1k

96k/88.2k 9-16 17-24 25-32

17-32 33-48 49-64

Dante

1-16

1-8

48k/44.1k

96k/88.2k 1-8 1-8 1-8

1-16 1-16 1-16

SLOT 1 SLOT 2 SLOT 3 SLOT 4

1-16

1-8

48k/44.1k

96k/88.2k 9-16 17-24 25-32

17-32 33-48 49-64

Dante

1-16

1-8

48k/44.1k

96k/88.2k 1-8 1-8 1-8

1-16 1-16 1-16

SLOT 1 SLOT 2 SLOT 3 SLOT 4

1-16

1-8

48k/44.1k

96k/88.2k 9-16 17-24 25-32

17-32 33-48 49-64

Dante

Owner’s Manual

Editing the user pattern

The user pattern lets you freely specify the routing between

Dante and the slots.

To edit the user pattern, use R Remote V4 or a CL/QL series

console.

For details, refer to the respective manuals.

About R Remote V4

This is an application that lets you view and edit the

settings of R series units such as the RSio64-D.

R Remote V4 can be downloaded from the following

website.

http://www.yamahaproaudio.com/

About the number of input/

output channels

The number of audio input/output channels is as follows.

Slots

The slots can provide up to 64 channels (16 channels per

slot) of audio signal input/output.

NOTE

• If an analog Mini-YGDAI card is installed and the

corresponding slot’s SRC is turned on, that slot uses the

RSio64-D’s internal 48 kHz clock.

• If this unit’s sampling frequency is set to 88 kHz or 96 kHz,

and you want to install a Mini-YGDAI card that does not

support 88.2 kHz or 96 kHz, you should turn SRC on for that

slot. If SRC is off, audio signals will not be output.

Dante

NOTE

To change the Dante clock frequency, use Dante Controller.

Frequency Input Output

44.1 kHz 16 ch 16 ch

48 kHz 16 ch 16 ch

88.2 kHz 8 ch 8 ch

96 kHz 8 ch 8 ch

Frequency Input Output

44.1 kHz 64 ch 64 ch

48 kHz 64 ch 64 ch

88.2 kHz 32 ch 32 ch

96 kHz 32 ch 32 ch

Owner’s Manual

Word Clock

Selecting a word clock

source

Use the WORD CLOCK select key on the front panel to

select the word clock source.

The unit’s clock is synced with the selected word clock

source.

*1 When this is flashing, the unit uses the Dante word clock to

operate and perform input/output.

*2 In order to use MY8-AEB, set AE  RSVD switch to the RSVD

position.

*3 If you want to change the frequency of the Dante word clock,

use Dante Controller.

About word clock

• If you select “WCLK IN” or “SLOT1 1/2,” the unit is

automatically set to Enable Sync To External

(synchronize to an external clock). If you select

“DANTE,” Enable Sync To External is automatically

turned off.

If you select “WCLK IN” or “SLOT1 1/2,” and this unit is

a clock slave of the Dante network, the same clock should

be input to the clock master device and to this device.

You can use Dante Controller to check which device is

the current clock master.

• If the word clock signal from the selected word clock

source is cut off, the unit switches to the “DANTE”

setting (Enable Sync To External automatically turns

off), and operates with the clock frequency that is

specified by Dante.

SRC (Sampling

Rate Converter)

• Even if the Mini-YGDAI card installed in a slot is not

synchronized with the Dante network, connection is

possible without having to change the respective clocks.

• The output signal from the slot synchronizes with the

clock from the slot’s input signal or with the clock that is

input via WORD CLOCK IN. However, if the card’s SRC

is enabled, the main unit’s SRC will be disabled, and

signals in sync with the main unit’s clock will be output.

WCLK IN

This is lit if the RSio64-D is using the word

clock that is being input from the rear panel

[WORD CLOCK IN] connector. This flashes if

there is no valid word clock input

SLOT1 1/2

This is lit if the channel 1/2 word clock of slot 1

is being used. This flashes if there is no valid

word clock input

. The channel 7/8 word clock

is used when using the MY8-AEB

DANTE

This is lit if the Dante network’s word clock

being used. (If no valid Dante signal is being

input, the clock generated by the internal Dante

module is used.)

Owner’s Manual

Other functions

Remote control

The same operations performed from the RSio64-D’s front

panel, such as turning SRC on/off, can be performed from

a device that supports remote control.

NOTE

For the latest information about remote control compatible

devices, refer to the Yamaha Pro Audio website:

http://www.yamahaproaudio.com/

Remote controllable parameters

* DANTE PATCH: Specifies which channels of the CL/QL series

console are input to which of the RSio64-D’s Dante 1–64 chan-

nels.

IDENTIFY

From a Yamaha CL/QL series console, from R Remote V4,

or from Dante Controller, you can identify a specific

RSio64-D unit from among multiple network-connected

devices. When you specify the IDENTIFY operation, all

front panel indicators on that unit except for the POWER

(INT/EXT) indicator will flash for ten seconds.

Panel lock

You can lock the panel to prevent unintended changes and

operations.

While the lock is engaged, all controllers on the front panel

are inoperable. To engage the lock, press and hold the

SLOT 1 and SLOT 4 [SRC] keys for at least 3 seconds. All

front panel indicators (except the power indicator) flash,

and operation is locked. To disengage the lock, press and

hold the SLOT 1 and SLOT 4 [SRC] keys for at least 3

seconds.

NOTE

• If you turn off the power while panel lock is engaged, panel

lock will still be engaged the next time the power is turned

on.

•Even if the front panel is locked, you can use remote control

to make changes to the settings.

Parameter Description

SRC ON/OFF Turns SRC on or off.

WORD CLOCK

Selects the source used as the mas-

ter clock.

USER PATTERN

Lets you specify the user routing pat-

tern.

DANTE PATCH* Lets you change the Dante patch.

ROUTING PATTERN Displays the pattern number.

SRC SOURCE CLOCK Shows the source used by the SRC.

POWER INT/EXT Shows the power supply status.

SYSTEM/SYNC STATUS Shows the system sync status.

DEVICE LABEL

Shows the UNIT ID/device name

(label).

Press simultaneously for

at least three seconds

Owner’s Manual

Other functions

Initializing the RSio64-D

To return (initialize) the internal memory to its factory-set

state, for example if you move the unit to a different

location, proceed as follows.

1. Turn the unit off.

2. On the front panel, set device setting DIP

switch 7 down and switch 8 up (INITIALIZE).

3. Turn the unit on.

Initialization begins. When initialization is completed,

the SLOT 1–4 [LOCK] and SLOT 1–4 [SRC] indicators

flash green and red alternately.

4. Verify that initialization is completed, and turn

the unit off.

5. Set device setting DIP switches 7 and 8 both up

(NORMAL).

6. Turn the unit on.

The following parameters are initialized.

(*1) The third and fourth characters of the Dante device label

depend on device setting DIP switch 1 and the SETUP [UNIT

ID] rotary switch. The lower six digits depend on the lower six

digits of the unit’s MAC address.

* When shipped from the factory, all of the device setting DIP

switches are set to the upward position.

Updating the RSio64-D’s

hardware settings

If the SLOT 1–4 [LOCK] indicators and the SLOT 1–4

[SRC] indicators are alternately flashing red and the unit

does not start up, it may be that the unit’s hardware settings

were not updated when updating the firmware. In this case,

proceed as follows to update the RSio64-D’s hardware

settings.

1. While holding down the SLOT 3 [SRC] key, turn

the power on again.

Updating of the unit’s hardware settings begins. During

the update, the SLOT 1 [LOCK] indicator and the

SLOT 1 [SRC] indicator light simultaneously. To

indicate the status during the update process, both the

[LOCK] indicator and the [SRC] indicator successively

light in the order of SLOT 2  SLOT 3  SLOT 4.

When the update is completed, the eight indicators

flash once and then return to the normal illumination

status.

If you are using the card’s

SRC

If your card features an SRC (MY8-AE96S), you can use the

card’s SRC instead of the main unit’s SRC.

To use the card’s SRC, set device setting DIP switch 6 on the

front panel to the down position.

When this function is enabled, the [SRC] key on the front

panel of the main unit will be used to turn the card’s SRC

on or off.

• Changes made to device setting DIP switch 6 will

become effective in three seconds.

• For a slot that has a card without an SRC inserted, the

[SRC] key will turn the unit’s SRC on or off regardless of

the switch position.

Parameter Initialized setting

SLOT 1–4 SRC OFF

WORD CLOCK SELECT DANTE/48 kHz

USER PATTERN

Same routing settings as preset pat-

tern 1

STATIC IP (Manual) 0.0.0.0

Panel Lock Lock defeated

Dante patches All off

Dante device label Y001-Yamaha-RSio64-D-123456

(*1)

7 8

12345678

7 8

Owner’s Manual

Troubleshooting

The following is an abbreviated list of frequently asked

questions in the past. Please check it if you run into similar

problems and need help.

Power does not turn on, power indicator does not

light



Connect the power cord properly (page 15).

 Turn the [POWER] switch ON. If the power still will not

come on, contact your Yamaha dealer.

SLOT 1–4 [LOCK] indicators and SLOT 1–4 [SRC]

indicators alternately flash red, and the unit does

not start up



The unit’s hardware settings was not updated after updating

the firmware. Alternatively, the unit’s hardware settings may

be damaged.

While holding down the SLOT 3 [SRC] key, turn the power

on again to update the unit’s hardware settings (page 20). If

the power still will not come on, contact your Yamaha dealer.

Sound is not output



Connect the cables properly.

 Verify that a signal is being output from the corresponding

device.

 If the SLOT 1–4 [LOCK] indicator is flashing red or lit red, re-

specify the correct clock.

 Is the patch of the Dante network set up correctly by Dante

Controller?

 On the unit to which the RSio64-D is connected, is the word

clock set in a way that is compatible with the Dante network?

 Check whether the user pattern setting is correct.

 Check whether the routing pattern selection might be incor-

rect.

Audio cuts out or distorts.



Is the slot’s input frequency selected correctly?

 If [SLOT] or [WCLK IN] is selected as the word clock source,

change it to [DANTE]. Keep in mind that if this remedies the

problem, the clocks for the Dante network and the unit will

not be synced. In this case, this unit must be acting as the

clock master for the Dante network. If this still does not solve

the problem, check the SLOT 1–4 [LOCK] indicators and the

WORD CLOCK indicators, and take the appropriate action.

For details, refer to the Dante Controller User Guide available

on the website.

http://www.yamahaproaudio.com/

Can’t operate the panel



Could panel lock be activated?

The RSio64-D is not recognized on the Dante

network



Does the Dante [UNIT ID] conflict with another Dante-com-

patible device made by Yamaha?

 Is the network switch working properly?

The problem may be solved by turning the network switch on

again.

 Is the cable defective?

The problem may be solved by replacing the cable.

Device settings and DIP switch settings are not

applied



Turn off the power before changing the setting. If you change

the setting while the power is on, the changed setting is not

applied until the power is turned off and on again.

What are the computer requirements for

updating the firmware?



For information about updating the unit, refer to the firm-

ware update guide for each product and the following website.

http://www.yamahaproaudio.com/

Cannot update



The problem may be solved by disabling any antivirus soft-

ware and the firewall of the computer. For other details, refer

to the firmware update guide available on the website.

http://www.yamahaproaudio.com/

What devices should I update?



It is necessary to update multiple devices depending on the

version of each device. For details, refer to the firmware com-

patibility available on the website.

http://www.yamahaproaudio.com/

How can the Dante input and output signals be

patched?



Use Dante Controller to configure the audio routing (patch-

ing) of the Dante network. For details, refer to the Dante Con-

troller User Guide available on the website.

http://www.yamahaproaudio.com/

Is it possible to receive the input signal from

RSio64-D by a separate mixer?



It can be configured using the Dante Controller. For details,

refer to the Dante Controller User Guide available on the

website.

http://www.yamahaproaudio.com/

In the case of a Yamaha CL/QL series unit, settings can be

made from the I/O DEVICE screen.

I want to change the RSio64-D settings from the

mixer

I want to know the devices that can remotely

configure the RSio64-D



For details on RSio64-D remote control, refer to the following

website.

http://www.yamahaproaudio.com/

What is the latency of the Dante network?



The latency of the Dante network can be specified using

Dante Controller. For details, refer to the manuals for each

product.

An internal error message such as “firmware

mismatch” is displayed on the device connected

to the RSio64-D.



Make sure that each device has a compatible version. For

details, refer to the firmware compatibility information avail-

able on the website.

http://www.yamahaproaudio.com/

Owner’s Manual

Messages

Errors, warnings, and certain other types of information

are displayed via the RSio64-D front panel indicators.

Messages are also displayed in the Dante Controller Error

Status field.

Each indicator lights or flashes as described below:

Error Messages

If one of the following errors has occurred, the device will

not operate. Until the error is resolved, the green SYSTEM

indicator will be turned off, and all indicators for all I/O

channels will continue to flash.

In addition, certain errors will cause the red SYSTEM

indicator to light or flash.

The following errors affect the settings or the hardware.

However, the device will still be usable. The green

SYSTEM indicator will light, and all indicators for all I/O

channels will work normally.

In addition, certain errors will cause the red SYSTEM

indicator to light or flash.

No call-out The indicator is off.

Light The indicator remains lit steadily.

Flash The indicator continues to flash.

Flash x2 The indicator flashes twice cyclically.

Flash x3 The indicator flashes three times cyclically.

[SYSTEM] Indicators Description Possible Solution

An internal error

has occurred.

The device has

failed. Contact

your Yamaha

dealer for repair.

Communication

cannot occur

because the MAC

address setting

has been cor-

rupted.

UNIT ID is not

unique.

Set a unique UNIT

ID number within

the Dante network.

The device’s DIP

switches are not

set correctly.

Check the DIP

switch settings,

and set them cor-

rectly.

(red)

Flash x2

(red)

Flash x3

(red)

Lit

(red)

Flash

[SYSTEM] Indicators Description Possible Solution

The number of

Dante transmit

flows exceeded the

limit.

Reduce the num-

ber of flows by, for

example, using

Dante Controller to

change some of

the transmit flows

to multicast.

The cooling fan

has stopped.

Check that noth-

ing is caught in the

fan. If the problem

persists, consult

your Yamaha

dealer.

The internal mem-

ory has been cor-

rupted.

When using the

unit in [NORMAL]

mode, if the prob-

lem persists even

after turning the

power off and on

again, consult your

Yamaha dealer.

Yo u changed the

positions of the

device setting DIP

switches or rotary

switch, or changed

the Dante settings

from Dante Con-

troller. Therefore,

the positions of the

device setting DIP

switches do not

match the act

ual

ante settings.

If the Device Lock

setting was

enabled from

Dante Controller,

disable the setting,

or check the

device setting DIP

switch positions,

and set them to

accommodate the

current situation.

(red)(green)

Lit Flash

(red)

Flash x2

(green)

Lit

(red)

Flash x3

(green)

Lit

(red)(green)

LitLit

Owner’s Manual

Warning Messages

The indicators will light and/or flash as shown until the

cause is resolved.

If the green [SYNC] indicator is unlit, the unit’s clock is

unconfirmed.

If the green indicator is flashing, the unit is the clock

master.

If the green indicator is lit, the unit is the clock slave and the

clock is synchronized.

Information Messages

The indicators will remain lit and/or flashing cyclically to

report the status.

If the orange [SYNC] indicator is unlit, the unit is operating

normally.

If the green [SYNC] indicator is unlit, the unit’s clock is

unconfirmed.

[SYNC] Indicators Description Possible Solution

The word clock is

not set correctly.

Set the clock mas-

ter and sampling

frequency cor-

rectly on the

RSio64-D-native

device or in Dante

Controller.

Dante Network cir-

cuit is broken.

Make sure that the

Ethernet cables

are not removed or

short-circuited.

Other Dante-com-

patible devices

cannot be found

due to an incor-

rectly-wired Dante

Network.

Make sure that the

Ethernet cables

are connected cor-

rectly.

[SYNC] Indicators Description Possible Solution

A non-GbE-com-

patible device is

connected.

When transferring

audio via Dante,

use device that

supports GbE.

The [SECOND-

ARY] connector

has taken over

communications

during redundant

networ

k operation.

Check the circuit

connected to the

[PRIMARY] con-

nector.

An abnormality

has occurred on

the circuit con-

nected to the

[SECONDARY]

connector during

redundant net-

work operation.

Check the circuit

connected to the

[SECONDARY]

connector.

(orange)

Flash

Flash x2

(orange)

Flash x3

(orange)

Light

(green)

Light

or flash

(orange)

FlashLight

or flash

(green) (orange)

Flash x2Light

or flash

(green) (orange)

[SYNC] Indicators Description Explanation

Muted during

startup, or in the

process of syn-

chronization.

Please wait until

started has com-

pleted or until the

unit has finished

synchronization. It

may take up to 45

seconds for com-

pletion.

The unit is func-

tioning correctly as

the word clock

master.

The unit is operat-

ing as the word

clock master.

The unit is func-

tioning correctly as

the word clock

slave.

The unit is operat-

ing as the clock

slave and the clock

is synchronized.

Lit

(orange)

(green)

Flash

(green)

Lit

166

Owner’s Manual

Specifications

General Specifications

Digital I/O Characteristics

Control I/O Characteristics

External DC Input Characteristics

*1: Power Requirements: +24V±2V, 3A

*2: 1pin=GND, 2pin=NC, 3pin=NC, 4pin=+24V

* The contents of this manual apply to the latest specifications as of the publishing date.

To obtain the latest manual, access the Yamaha website then download the manual file.

Sampling Frequency

External Clock

Frequency Range

44.1 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm

48 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm

88.2 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm

96 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm

Signal Delay

SLOT IN (MY8-AE96) to SLOT OUT (MY8-AE96)

(@ fs=96 kHz, SRC off, Internal routing)

Less than 0.2 ms

SLOT IN (MY8-AE96) to Rio3224-D AES OUT

(@ fs=48 kHz, through Dante, SRC off)

(Dante Receive Latency set to 0.25 ms)

Less than 0.8 ms

SLOT IN (MY8-AE96) to Rio3224-D AES OUT

(@ fs=96 kHz, through Dante, SRC off)

(Dante Receive Latency set to 0.25 ms)

Less than 0.5 ms

SLOT IN (MY8-AE96) to Rio3224-D AES OUT

(@ fs=96 kHz, through Dante, SRC on, SLOT fs=48 kHz)

(Dante Receive Latency set to 0.25 ms)

Less than 1.1 ms

SRC

SRC Lock Range: 39.7 kHz – 101.7 kHz

Sample Rate Ratio Limit: 1:2.6 to 2.6:1

Dimensions (W x H x D) and Net Weight 480 x 88 x 365 mm, 6.1 kg

Power Requirements (wattage) 60 W

Power Requirements (voltage and hertz) 100-240 V 50/60 Hz

Temperature Range

Operating temperature range: 0 – 40 °C

Storage temperature range: -20 – 60 °C

Included Accessories Owner’s Manual, AC power cord

Terminal Format Data Length Level Audio I/O Connector

Primary/Secondary Dante 24 bit or 32 bit 1000 BASE-T

64 ch Input/64 ch Output@48 kHz

32 ch Input/32 ch Output@96 kHz

etherCON CAT5e

Terminal Format Level Connector

WORD CLOCK IN — TTL/75 Ω terminated BNC

Terminal Format Level Connector

EXT DC INPUT

——

XLR-4-32 type

Owner’s Manual

167

Dimensions

12345678

1234

365

480

430

360

Unit: mm

168

Owner’s Manual

Block Diagram

1 8 channels when SLOT CLOCK is 96kHz.

2 32 channels when SYSTEM CLOCK is 96kHz.

3 Channels 7/8 when using the MY8-AEB.

WCLK IN

Same above

SLOT4

SLOT3

SLOT2

SLOT1

SRC

w/ thru

128x128

Patch

Dante

AUDIO

CLOCK

SRC WCLK

SLOT CLOCK

WORD CLOCK

CH1/2

WCLK IN

SRC OFF

WCLK IN

SYSTEM CLOCK

Dante

SLOT1 1/2

Dante

PRIMARY

Dante

SECONDARY

Owner’s Manual

169

170

Owner’s Manual

ADDRESS LIST

HEAD OFFICE Yamaha Corporation, Commercial Audio Business Division

10-1, Nakazawa-cho, Naka-ku, Hamamatsu, Japan 430-8650

CANADA

Yamaha Canada Music Ltd.

135 Milner Avenue, Toronto, Ontario,

M1S 3R1, Canada

Tel: +1-416-298-1311

U.S.A.

Yamaha Corporation of America

6600 Orangethorpe Avenue, Buena Park, CA 90620,

U.S.A.

Tel: +1-714-522-9011

MEXICO

Yamaha de México, S.A. de C.V.

Av. Insurgentes Sur 1647 Piso 9, Col. San José

Insurgentes, Delegación Benito Juárez, México,

D.F., C.P. 03900

Tel: +52-55-5804-0600

BRAZIL

Yamaha Musical do Brasil Ltda.

Rua Fidêncio Ramos, 302 – Cj 52 e 54 – Torre B – Vila

Olímpia – CEP 04551-010 – São Paulo/SP, Brazil

Tel: +55-11-3704-1377

ARGENTINA

Yamaha Music Latin America, S.A.,

Sucursal Argentina

Olga Cossettini 1553, Piso 4 Norte,

Madero Este-C1107CEK,

Buenos Aires, Argentina

Tel: +54-11-4119-7000

PANAMA AND OTHER LATIN

AMERICAN COUNTRIES/

CARIBBEAN COUNTRIES

Yamaha Music Latin America, S.A.

Edif. Torre Banco General, Piso 7, Urbanización

Marbella, Calle 47 y Aquilino de la Guardia,

Ciudad de Panamá, República de Panamá

Tel: +507-269-5311

THE UNITED KINGDOM/IRELAND

Yamaha Music Europe GmbH (UK)

Sherbourne Drive, Tilbrook, Milton Keynes,

MK7 8BL, U.K.

Tel: +44-1908-366700

GERMANY

Yamaha Music Europe GmbH

Siemensstrasse 22-34, 25462 Rellingen, Germany

Tel: +49-4101-303-0

SWITZERLAND/LIECHTENSTEIN

Yamaha Music Europe GmbH, Branch

Switzerland in Thalwil

Seestrasse 18a, 8800 Thalwil, Switzerland

Tel: +41-44-3878080

AUSTRIA/BULGARIA

Yamaha Music Europe GmbH Branch Austria

Schleiergasse 20, 1100 Wien, Austria

Tel: +43-1-60203900

CZECH REPUBLIC/HUNGARY/

ROMANIA/SLOVAKIA/SLOVENIA

Yamaha Music Europe GmbH

Branch Austria

Schleiergasse 20, 1100 Wien, Austria

Tel: +43-1-60203900

POLAND/LITHUANIA/LATVIA/ESTONIA

Yamaha Music Europe GmbH

Sp.z o.o. Oddział w Polsce

ul. Wielicka 52, 02-657 Warszawa, Poland

Tel: +48-22-880-08-88

MALTA

Olimpus Music Ltd.

Valletta Road, Mosta MST9010, Malta

Tel: +356-2133-2093

NETHERLANDS/BELGIUM/

LUXEMBOURG

Yamaha Music Europe Branch Benelux

Clarissenhof 5b, 4133 AB Vianen, The Netherlands

Tel: +31-347-358040

FRANCE

Yamaha M us ic E u rope

7 rue Ambroise Croizat, Zone d'activités de Pariest,

77183 Croissy-Beaubourg, France

Tel: +33-1-6461-4000

ITALY

Yamaha Music Europe GmbH, Branch Italy

Via Tinelli N.67/69 20855 Gerno di Lesmo (MB),

Italy

Tel: +39-039-9065-1

SPAIN/PORTUGAL

Yamaha Music Europe GmbH Ibérica, Sucursal

en España

Ctra. de la Coruna km. 17,200, 28231

Las Rozas de Madrid, Spain

Tel: +34-91-639-88-88

GREECE

Philippos Nakas S.A. The Music House

19th klm. Leof. Lavriou 190 02 Peania – Attiki,

Greece

Tel: +30-210-6686168

SWEDEN/FINLAND/ICELAND

Yamaha Music Europe GmbH Germany filial

Scandinavia

JA Wettergrensgata 1, 400 43 Göteborg, Sweden

Tel: +46-31-89-34-00

DENMARK

Yamaha Music Denmark,

Fillial of Yamaha Music Europe GmbH, Tyskland

Generatorvej 8C, ST. TH. , 2860 Søborg, Denmark

Tel: +45-44-92-49-00

NORWAY

Yamaha Music Europe GmbH Germany -

Norwegian Branch

Grini Næringspark 1, 1332 Østerås, Norway

Tel: +47-6716-7800

RUSSIA

Yamaha Music (Russia) LLC.

Room 37, entrance 7, bld. 7, Kievskaya street,

Moscow, 121059, Russia

Tel: +7-495-626-5005

OTHER EUROPEAN COUNTRIES

Yamaha Music Europe GmbH

Siemensstrasse 22-34, 25462 Rellingen, Germany

Tel: +49-4101-3030

Yamaha M us ic G u l f F Z E

JAFZA-16, Office 512, P.O.Box 17328,

Jebel Ali FZE, Dubai, UAE

Tel: +971-4-801-1500

TURKEY

Yamaha Music Europe GmbH

Merkezi Almanya Türkiye İstanbul Şubesi

Maslak Meydan Sodak, Spring Giz Plaza Bagimsiz

Böl. No:3, Sariyer Istanbul, Turkey

Tel: +90-212-999-8010

CYPRUS

Yamaha Music Europe GmbH

Siemensstrasse 22-34, 25462 Rellingen, Germany

Tel: +49-4101-303-0

OTHER COUNTRIES

Yamaha M us ic G u l f F Z E

JAFZA-16, Office 512, P.O.Box 17328,

Jebel Ali FZE, Dubai, UAE

Tel: +971-4-801-1500

THE PEOPLE’S REPUBLIC OF CHINA

Yamaha Music & Electronics (China) Co.,Ltd.

2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,

Shanghai, China

Tel: +86-400-051-7700

INDIA

Yamaha Music India Private Limited

P-401, JMD Megapolis, Sector-48, Sohna Road,

Gurgaon-122018, Haryana, India

Tel: +91-124-485-3300

INDONESIA

PT. Yamaha Musik Indonesia (Distributor)

Yamaha Music Center Bldg. Jalan Jend. Gatot

Subroto Kav. 4, Jakarta 12930, Indonesia

Tel: +62-21-520-2577

KOREA

Yamaha Music Korea Ltd.

8F, Dongsung Bldg. 21, Teheran-ro 87-gil,

Gangnam-gu, Seoul, 06169, Korea

Tel: +82-2-3467-3300

MALAYSIA

Yamaha Music (Malaysia) Sdn. Bhd.

No.8, Jalan Perbandaran, Kelana Jaya, 47301

Petaling Jaya, Selangor, Malaysia

Tel: +60-3-78030900

SINGAPORE

Yamaha Music (Asia) Private Limited

Block 202 Hougang Street 21, #02-00,

Singapore 530202, Singapore

Tel: +65-6740-9200

TAIWAN

Yamaha Music & Electronics Taiwan Co.,Ltd.

2F., No.1, Yuandong Rd. Banqiao Dist.

New Taipei City 22063, Taiwan, R.O.C.

Tel: +886-2-7741-8888

THAILAND

Siam Music Yamaha Co., Ltd.

3, 4, 15, 16th Fl., Siam Motors Building,

891/1 Rama 1 Road, Wangmai,

Pathumwan, Bangkok 10330, Thailand

Tel: +66-2215-2622

VIETNAM

Yamaha Music Vietnam Company Limited

15th Floor, Nam A Bank Tower, 201-203 Cach

Mang Thang Tam St., Ward 4, Dist.3,

Ho Chi Minh City, Vietnam

Tel: +84-8-3818-1122

OTHER ASIAN COUNTRIES

Yamaha Corporation

Sales & Marketing Division

10-1, Nakazawa-cho, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2312

AUSTRALIA

Yamaha Music Australia Pty. Ltd.

Level 1, 99 Queensbridge Street, Southbank,

VIC 3006, Australia

Tel: +61-3-9693-5111

COUNTRIES AND TRUST

TERRITORIES IN PACIFIC OCEAN

Yamaha Corporation

Sales & Marketing Division

10-1, Nakazawa-cho, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2312

NORTH AMERICA

CENTRAL & SOUTH AMERICA

EUROPE

AFRICA

MIDDLE EAST

ASIA

OCEANIA

PA46

MEMO

amaha Pro Audio global website

http://www.yamahaproaudio.com/

Yamaha Downloads

http://download.yamaha.com/

ZX32880

Manual Development Group

Published 12/2016 POHD-B0

Printed in China

Documenttranscriptie

English Deutsch 取扱説明書 EN DE FR ES IT RU PT JA AUDIO INTERFACE 日本語 Owner’s Manual Bedienungsanleitung Mode d’emploi Manual de instrucciones Manuale di istruzioni Руководство пользователя Manual do Proprietário Português Русский Italiano Español Français I/O RACK The above warning is located on the top of the unit. L’avertissement ci-dessus est situé sur le dessus de l’unité. Explanation of Graphical Symbols Explication des symboles The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une « tension dangereuse » non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour constituer un risque d’électrocution. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’instructions importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation fournie. IMPORTANT SAFETY INSTRUCTIONS PRÉCAUTIONS CONCERNANT LA SÉCURITÉ 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 8 9 10 11 12 13 14 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. (UL60065_03) Lire ces instructions. Conserver ces instructions. Tenir compte de tous les avertissements. Suivre toutes les instructions. Ne pas utiliser ce produit à proximité d’eau. Nettoyer uniquement avec un chiffon propre et sec. Ne pas bloquer les orifices de ventilation. Installer l’appareil conformément aux instructions du fabricant. Ne pas installer l’appareil à proximité d’une source de chaleur comme un radiateur, une bouche de chaleur, un poêle ou tout autre appareil (y compris un amplificateur) produisant de la chaleur. Ne pas modifier le système de sécurité de la fiche polarisée ou de la fiche de terre. Une fiche polarisée dispose de deux broches dont une est plus large que l’autre. Une fiche de terre dispose de deux broches et d’une troisième pour le raccordement à la terre. Cette broche plus large ou cette troisième broche est destinée à assurer la sécurité de l’utilisateur. Si la fiche équipant l’appareil n’est pas compatible avec les prises de courant disponibles, faire remplacer les prises par un électricien. Acheminer les cordons d’alimentation de sorte qu’ils ne soient pas piétinés ni coincés, en faisant tout spécialement attention aux fiches, prises de courant et au point de sortie de l’appareil. Utiliser exclusivement les fixations et accessoires spécifiés par le fabricant. Utiliser exclusivement le chariot, le stand, le trépied, le support ou la table recommandés par le fabricant ou vendus avec cet appareil. Si l’appareil est posé sur un chariot, déplacer le chariot avec précaution pour éviter tout risque de chute et de blessure. Débrancher l’appareil en cas d’orage ou lorsqu’il doit rester hors service pendant une période prolongée. Confier toute réparation à un personnel qualifié. Faire réparer l’appareil s’il a subi tout dommage, par exemple si la fiche ou le cordon d’alimentation est endommagé, si du liquide a coulé ou des objets sont tombés à l’intérieur de l’appareil, si l’appareil a été exposé à la pluie ou à de l’humidité, si l’appareil ne fonctionne pas normalement ou est tombé. AVERTISSEMENT POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ. (UL60065_03) 2 Owner’s Manual FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B) COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party : Address : Telephone : Type of Equipment : Model Name : Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620 714-522-9011 Audio Interface RSio64-D This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation. See user manual instructions if interference to radio reception is suspected. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC) IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord WARNING: THIS APPARATUS MUST BE EARTHED IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or colored GREEN or GREEN-and-YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. (3 wires) In Finland: Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan. In Norway: Apparatet må tilkoples jordet stikkontakt. In Sweden: Apparaten skall anslutas till jordat uttag. (class I hokuo) 이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다. (class b korea) Owner’s Manual 3 Contents Troubleshooting . . . . . . . . . . . . . . . 21 Messages PRECAUTIONS. . . . . . . . . . . . . . . . . . .5 Introduction 8 Features ....................................................... 8 Precautions for Rack Mounting .................... 8 Firmware Updates........................................ 8 Controls and Functions 9 22 Error Messages ........................................... 22 Warning Messages ..................................... 23 Information Messages ................................ 23 Specifications . . . . . . . . . . . . . . . . 166 Dimensions . . . . . . . . . . . . . . . . . . 167 Block Diagram . . . . . . . . . . . . . . . 168 Front Panel .................................................. 9 Rear Panel.................................................. 12 Connections 14 Installing a Mini-YGDAI card ...................... 14 About Dante .............................................. 14 Notes Regarding the Use of Network Switches ................................. 15 About Dante Controller ............................. 15 Connecting AC Power................................ 15 Power on and off ....................................... 15 Various settings Specifying the RSio64-D’s word clock ...........18 Specifying the audio routing ........................16 Specifying the ID that distinguishes the RSio64-D ......................10 Specifying the UNIT ID range .......................10 Specifying how the IP address is set..............10 Specifying the type of connection to the Dante network ............11 Initializing the RSio64-D ...............................20 Specifying the audio routing 16 Editing the user pattern ............................. 17 About R Remote V4 ................................... 17 About the number of input/output channels........................... 17 Word Clock 18 Selecting a word clock source .................... 18 About word clock ...................................... 18 SRC (Sampling Rate Converter). . . .18 Other functions 19 Remote control .......................................... 19 IDENTIFY ................................................... 19 Panel lock .................................................. 19 Initializing the RSio64-D............................. 20 Updating the RSio64-D’s hardware settings.................................. 20 If you are using the card’s SRC................... 20 4 Owner’s Manual Specifying the SRC word clock .....................11 Included items (please check) • Owner’s manual • Power cord PA_en_4 1/2 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Fire warning • Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. If you notice any abnormality • When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. Then have the device inspected by Yamaha service personnel. - The power cord or plug becomes frayed or damaged. - It emits unusual smells or smoke. - Some object has been dropped into the device. - There is a sudden loss of sound during use of the device. • If this device should be dropped or damaged, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Yamaha service personnel. Power supply/power cord • Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it. • Only use the voltage specified as correct for the device. The required voltage is printed on the name plate of the device. • Use only the supplied power cord/plug. If you intend to use the device in an area other than in the one you purchased, the included power cord may not be compatible. Please check with your Yamaha dealer. • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following: Power supply/power cord • When removing the electric plug from the device or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. • When setting up the device, make sure that the AC outlet you are using is easily accessible. If you feel that a malfunction has occurred, immediately turn off the power, unplug the power cord plug from the electrical outlet, and also disconnect the connected power supply from the EXT DC INPUT jack. Even when the power switch is turned off, as long as the power cord is not unplugged from the wall AC outlet, the device will not be disconnected from the power source. • Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or during electrical storms. • Be sure to connect to an appropriate outlet with a protective grounding connection. Improper grounding can result in electrical shock, damage to the device(s), or even fire. • Do not block the vents. This device has ventilation holes at the front/sides to prevent the internal temperature from becoming too high. In particular, do not place the device on its side or upside down. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire. Do not open • This device contains no user-serviceable parts. Do not open the device or attempt to disassemble the internal parts or modify them in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. Water warning • Do not expose the device to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into the device, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualified Yamaha service personnel. Location • Do not place the device in an unstable position where it might accidentally fall over. • When installing the device: - Do not cover it with any cloth. - Do not install it on a carpet or rug. - Make sure the top surface faces up; do not install on its sides or upside down. - Do not use the device in a confined, poorly-ventilated location. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire. • Do not place the device in a location where it may come into contact with corrosive gases or salt air. Doing so may result in malfunction. • Before moving the device, remove all connected cables. • Never insert or remove an electric plug with wet hands. Owner’s Manual 5 PA_en_4 2/2 • When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch also disconnect the unit from the power supply that is connected to the EXT DC INPUT jack. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. • If the device is mounted in an EIA standard rack, carefully read the section “Precautions for Rack Mounting” on page 8. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), malfunction, or even fire. Connections • Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum. Maintenance • Periodically inspect and clean the air filter of the front panel ventilation opening (page 11). Dust and dirt can seriously degrade the effectiveness of the cooling fan and result in malfunction or fire. • Remove the power plug from the AC outlet when cleaning the device. NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.  Handling and maintenance • Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the device, TV, or radio may generate noise. • Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day), in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the internal components. • Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel. • When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemicalimpregnated wiping cloths. • Condensation can occur in the device due to rapid, drastic changes in ambient temperature—when the device is moved from one location to another, or air conditioning is turned on or off, for example. Using the device while condensation is present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for several hours without turning on the power until the condensation has completely dried out. • Always turn the power off when the device is not in use. Handling caution • Do not insert your fingers or hands in any gaps or openings on the device (vents). • Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or openings on the device (vents, etc.) If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualified Yamaha service personnel. • Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force on the buttons, switches or connectors. Yamaha cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed. 6 Owner’s Manual Information  About this manual • The illustrations as shown in this manual are for instructional purposes only. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at the top of the unit. You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. (rear_en_01) Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. (weee_eu_en_01) European Models Purchaser/User Information specified in EN55103-1:2009 and EN55103-2:2009. Inrush Current: 1.0A (on initial switch-on) 1.0A (after a supply interruption of 5s) Conforms to Environments: E1, E2, E3 and E4 Owner’s Manual 7 Introduction Introduction Precautions for Rack Mounting Thank you for choosing the Yamaha RSio64-D audio interface. To take full advantage of the superior functions and performance offered by the RSio64-D, and to enjoy years of trouble-free use, be sure to read this owner’s manual carefully before operation. This unit is rated for operation at ambient temperatures ranging from 0 to 40 degrees Celsius. When mounting the unit with other RSio unit(s) or other device(s) in an EIA standard equipment rack, internal temperatures can exceed the specified upper limit, resulting in impaired performance or failure. When rack mounting the unit, always observe the following requirements to avoid heat buildup: Features The RSio64-D is an interface that can be used as a router and format converter between Dante and Mini-YGDAI cards. This allows Mini-YGDAI cards that support a wide variety of input/output formats and processing to be connected to a Dante network, meeting the needs of various types of systems including broadcast, live, recording, and postproduction. In addition, the settings of the RSio64-D can be fully controlled from a CL or QL series console. • A wide variety of Mini-YGDAI cards can be used, including processing cards as well as input/output cards. • When mounting the unit in a rack with devices such as power amplifiers that generate a significant amount of heat, leave more than 1U of space between the RSio and other equipment. Also either leave the open spaces uncovered or install appropriate ventilating panels to minimize the possibility of heat buildup. • To ensure sufficient airflow, leave the rear of the rack open and position it at least 10 centimeters from walls or other surfaces. If you’ve installed a fan kit, there may be cases in which closing the rear of the rack will produce a greater cooling effect. Refer to the rack and/or fan unit manual for details. • Each MY slot provides an SRC (Sampling Rate Converter) to allow digital connection between differing word clock routes. Firmware Updates • Seven different widely usable routing patterns are preset, including routing between Mini-YGDAI cards. Matrix patching from R Remote V4 or a CL/QL console. This product enables you to update the unit firmware to improve operations, add functions, and correct possible malfunctions. The following two types of firmware are available for the unit: • EXT DC INPUT supports redundant power supplies. • Dante redundancy (primary/secondary) is supported. NOTE Before you install Mini-YGDAI cards in slots 1–4, you must check the Yamaha website to determine whether the card is compatible with the RSio64-D, and to verify the total number of Yamaha or third-party cards that can be installed in combination with that card. Yamaha website: http://www.yamahaproaudio.com/ • Unit’s firmware • Dante module firmware Firmware updates are performed from R Remote V4. Details on updating the firmware are available on the following website: http://www.yamahaproaudio.com/ For information on updating the unit, refer to the firmware update guide available on the website. NOTE It is necessary to update other devices depending on the version of each device in the Dante network. For details, refer to the firmware compatibility available on the Yamaha website. http://www.yamahaproaudio.com/ 8 Owner’s Manual Controls and Functions Controls and Functions Front Panel r t y o !0 we q SLOT 1–4 [LOCK] indicators These indicate the word clock status of slots 1–4. The indicator is lit green if operation is normal. Unlit Green (lit) LOCK Green (flashing) SYNC ERROR Red (lit) UNLOCK Red (flashing) WRONG WORD CLOCK No card is installed in the slot, or an unsupported card is installed. This indicates that a clock synchronized with the clock source selected by the WORD CLOCK select key is being input from the card. If an external device is connected to the corresponding slot, input/output is occurring correctly between that device and the RSio64-D. If the sampling frequency is close, this status is shown in some cases even if not synchronized. A valid clock is being input from the card, but is not synchronized with the clock source selected by the WORD CLOCK select key. If an external device is connected to the corresponding slot, input/output is not occurring correctly between that device and the RSio64D. Input/output will occur correctly if SRC is turned ON. A valid clock is not being input from the card. If an external device is connected to the corresponding slot, input/output cannot occur correctly between that device and the RSio64-D. The frequency of the clock source selected by the WORD CLOCK select key is outside the range of operating frequencies of the card installed in the slot. Either set the frequency of the clock source to be within the operating range of the card, or turn SRC on. In the case of an analog card, turning SRC on makes the card operate at the RSio64-D’s internal frequency of 48 kHz. 1 2 3 4 5 6 7 8 u ON q ON !3 !3 1 2 3 4 i !1 !2 NOTE • If the SLOT1–4 [LOCK] indicators and the SLOT1–4 [SRC] indicators and all WORD CLOCK indicators simultaneously flash red at startup, overcurrent has occurred in a MiniYGDAI card, or a malfunctioning Mini-YGDAI card is installed. Turn off the power and remove the card that is causing the problem. • If the SLOT1–4 [LOCK] indicators and the SLOT1–4 [SRC] indicators alternately flash red at startup, the hardware settings of the RSio64-D need to be updated (page 20). • If the SLOT1–4 [LOCK] indicators sequentially light green in the order of 1–4 at startup, the clocks of the slots are synchronizing. This may take several tens of seconds. w SLOT 1–4 [SRC] indicators These indicate the SRC (Sampling Rate Converter) status of slots 1–4. Unlit SRC is off. Green (lit) SRC is on, and the clock selected by the SRC WCLK DIP switch is being input correctly. Red (lit) SRC is on, but an appropriate clock is not being input. It may be that the clock selected by the SRC WCLK DIP switch is not being input, or is outside the operating range. Either turn SRC off, or change the setting of the DIP switch. NOTE The SRC clock sent to a Mini-YGDAI card installed in a slot is selected by the SRC WCLK DIP switch (page 11). e SLOT 1–4 [SRC] keys For each slot, these turn SRC on/off for the slot’s input as well as output. Owner’s Manual 9 Controls and Functions r WORD CLOCK select key Selects the word clock source of the RSio64-D. WORD CLOCK [WCLK IN] indicator WORD CLOCK [SLOT1 1/2] indicator WORD CLOCK [DANTE] indicator These indicate the status of the RSio64-D’s word clock source. WCLK IN This is lit if the RSio64-D is using the word clock that is being input from the rear panel [WORD CLOCK IN] connector. This flashes if there is no valid word clock input*1. This is lit if the channel 1/2 word clock of slot 1 is being used. This flashes if there is no valid word clock input*1. The channel 7/8 word clock SLOT1 1/2 is used when using the MY8-AEB*2. If the SRC on the MY8-AE96S is in use, you will be unable to use the input signal as word clock. DANTE u Device setting DIP switches These switches specify startup settings for the device. Details are given below. Making the setting Turn off the power before you change these DIP switch settings. The setting is applied the next time you turn the power on. If you change the setting while the power is on, the changed setting is not applied until the power is turned off and on again. (This note does not apply to switch 6.) The switch illustrations indicate the setting state as follows. Switch State Switch is in the upward (OFF) position. This is lit if the Dante network’s word clock*3 is being used. (If no valid Dante signal is being input, the clock generated by the internal Dante module is used.) Switch is in the downward (ON) position. *1 When this is flashing, the unit uses the Dante word clock to operate and perform input/output. ON *2 In order to use MY8-AEB, set AE  RSVD switch to the RSVD position. *3 If you want to change the frequency of the Dante word clock, use Dante Controller. t ROUTING [PATTERN] rotary switch This selects the RSio64-D’s internal audio routing pattern from seven preset patterns and one user pattern. Setting the rotary switch to 1–7 selects preset routing patterns 1–7, and setting it to 0 selects the user routing pattern. Making the setting You can select the routing pattern even when the power is on. Your selection is applied three seconds after you switch the routing pattern. UNIT ID IP SETTING SECONDARY PORT START UP MODE • Switch 1 (UNIT ID) This switch setting determines whether the [UNIT ID] setting will range from hexadecimal 00 to 0F or from 10 to 1F. Switch NOTE The routing pattern does not change if you select 8–F. y SETUP [UNIT ID] rotary switch Specifies an ID that identifies this device on the Dante network. If there are multiple Dante-compatible devices from Yamaha that require an ID setting connected to the same network, set a different ID for each device. Making the setting Turn off the power before you change the setting of this rotary switch. The setting is applied the next time you turn the power on. If you change the setting while the power is on, the changed setting is not applied until the power is turned off and on again. Owner’s Manual Setting Description 1 UNIT ID = 00-0F The UNIT ID setting range is 00 to 0F. 1 UNIT ID = 10-1F The UNIT ID setting range is 10 to 1F. • Switch 2/Switch 3 (IP SETTING) These specify the method of setting the IP address used when communicating with an external device such as R Remote V4. When connecting the RSio64-D to a computer for the first time immediately after purchase, set this to something other than STATIC IP (MANUAL). If you want to set this to STATIC IP (MANUAL), first specify the IP address from R Remote V4 and then switch this setting to STATIC IP (MANUAL). Switch 2 3 Setting Description AUTO IP The Dante network automatically specifies the IP address as 169.254.XX.XX. DHCP The IP address assigned from the DHCP server is used. 2 3 2 3 STATIC IP (AUTO) The IP address is specified as 192.168.0.xx (xx=UNIT ID). 3 STATIC IP (MANUAL) The IP address is specified from an external device such as R Remote V4. 2 10 1 2 3 4 5 6 7 8 Front Panel NOTE • If the network consists only of Dante devices and R Remote V4, we recommend that you set this to AUTO IP. • If connecting to an existing network, select DHCP as necessary. • If you want to use zoning to specify the IP address, or if you want to connect to an existing network and fix the IP address, use R Remote V4 to specify the IP address and then set this to STATIC IP (MANUAL). • Switch 7/Switch 8 (START UP MODE) These switches specify the start-up mode. Switch 7 7 • Switch 4 (SECONDARY PORT) This switch setting determines whether the rear-panel [SECONDARY] connector will be used for a daisy chain or redundant network. If this is set to [DAISY CHAIN], you can connect multiple Dante-enabled network devices in a daisy chain without using a network switch. With the [REDUNDANT] setting, the [PRIMARY] connector will be used for primary connections, and the [SECONDARY] connector will be used for secondary (backup) connections. This provides a redundant connection so that if the unit is unable to transmit signals through the [PRIMARY] connector for some reason (e.g., due to damage or accidental removal of the cable, or a failed network switch), the [SECONDARY] connector will automatically take over communications. Switch 4 4 Settings Description The [SECONDARY] connector is used for a daisy chain connection. A signal at the [PRIDAISY CHAIN MARY] connector will be transmitted to the next device in the chain as is. The [SECONDARY] connector is used for a redundant network. It will function as backup REDUNDANT connection, independent of the network to which the [PRIMARY] connector is connected. • Switch 5 Not used. Leave these in the factory-set position (upward). • Switch 6 This switch position specifies the SRC to be used: one on the main unit or one on the MY8-AE96S card. If you are using a card other than MY8-AE96S, the SRC will always be used on the main unit regardless of the switch position. NOTE If SRC on the MY8-AE96S card is used, the input and output of the unit’s SRC will be disabled, and the main unit’s word clock will be used as the card’s SRC clock regardless of the switch position. Switch 6 6 Settings NORMAL CARD Description The main unit’s SRC is used. The card’s SRC is used. 8 8 Settings NORMAL INITIALIZE Description Start up normally with the settings of the previous start-up. Initialize the settings. For details on the settings that are initialized, refer to “Initializing the RSio64-D” (page 20). i SRC WCLK DIP switches These select the word clock of each slot’s SRC (SLOT/ WORD CLOCK IN). DIP switches 1–4 correspond to SLOT 1–4. When a DIP switch is off, the word clock of the corresponding slot is used. When a DIP switch is on, the signal of WORDCLOCK IN is used as the SRC word clock. NOTE • The setting of these DIP switches is applied three seconds after they are switched while the power is on. • If an analog Mini-YGDAI card is installed and the corresponding slot’s SRC is turned on, that slot uses the RSio64-D’s internal 48 kHz clock. o Dante [SYSTEM] indicators These indicate the operating status of the unit. If the green indicator lights steadily and the red indicator turns off, the unit is operating normally. When power to the unit is turned ON, if the green indicator turns off, or if the red indicator lights or flashes, the unit is not functioning properly. In this case, refer to “Messages” (page 22). !0 Dante [SYNC] indicators These indicate the sync status between the Dante network and this unit. If the green indicator lights, the unit is operating as a word clock slave and synching to the word clock. If the green indicator flashes, the unit is operating as the word clock master. If the unit is powered-on but the green indicator is unlit, a malfunction has occurred. In this case, refer to “Messages”(page 22). Also refer to “Messages” if the orange indicator is lit or flashing. !1 POWER INT indicator Indicates whether the AC IN power supply is powered. If the power switch is off, this indicator is unlit regardless of whether power is supplied to AC IN. !2 POWER EXT indicator Indicates whether the EXT DC INPUT power supply is powered. This is lit if the EXT DC INPUT power supply is powered. This indicator is not affected by the state of the power switch. !3 Cooling vents To prevent the interior temperature from becoming excessive, two cooling vents are provided on the front panel. Air filters are installed inside the cooling vents to prevent dust from entering the unit through the vents. • Cleaning the cooling vents After extended use, dust may accumulate on the cooling vents, obstructing the airflow. If dust accumulates, remove it periodically by placing a vacuum cleaner gently over the cooling vents. Owner’s Manual 11 Controls and Functions Rear Panel w q !0 e t yu r q [ ]/[ ] (power switch) Turns the unit’s power (supplied from the AC IN connector) on [ ]/off [ ]. If power is supplied from the AC IN connector and this power switch is also on, the front panel POWER INT indicator is lit. CAUTION Even when the power switch is turned off, a small amount of current is flowing through the unit. When you are not using the product for a long time, make sure to unplug the power cord from the AC outlet. NOTE Rapidly turning the unit on and off in succession can cause it to malfunction. After turning the unit off, wait for at least 6 seconds before turning it on again. w AC IN connector Connect the supplied AC power cord here. First connect the AC power cord to the RSio unit, then insert the power cord plug into an AC power outlet. The supplied AC power cord features a V-lock mechanism via a latch, which prevents the power cord from coming off accidentally. Insert the cable plug all the way until it locks in securely. CAUTION Be sure to turn the power off before connecting or disconnecting the power cord. Press the latch button on the plug to disconnect the power cord. o i e EXT DC INPUT connector This is an XLR-4-32 type connector through which an external power supply (+24V) can be provided as a backup for the internal power supply of the RSio64-D. CAUTION Before connecting the external power supply, you must turn off the power of this unit and the power of the external power supply. Malfunctions or electrical shock may occur if you fail to observe this caution. NOTE • This power supply cannot be turned on/off by the power switch. • If an external power supply is connected, the RSio64-D will operate normally when the internal and external power supplies are both on, as well as when only one of them is on. • If both power supplies are on and one of the power supplies fails during operation, the unit automatically switches to the other power supply. The state of the power supply is shown by the front panel POWER indicator. r Grounding screw Since the included power cord has a three-conductor plug, this unit is appropriately grounded if the AC outlet is grounded. In some cases, you may be able to reduce hum and interference by connecting ground to this screw as well. t SLOT 1–4 Mini-YGDAI I/O cards can be installed in these slots. Each of the four slots is equipped with an SRC. y SLOT ACTIVE indicator Indicates whether the slots are powered. CAUTION Do not insert or remove a Mini-YGDAI card if this indicator is lit. Malfunctions or electrical shock may occur if you fail to observe this caution. 12 Owner’s Manual Rear Panel u WORD CLOCK IN connector This is a BNC connector used to receive word clock signals. The WORD CLOCK IN connector is internally terminated with 75Ω. i Dante [PRIMARY] connector Dante [SECONDARY] connector These etherCON (RJ45) connectors allow connection with Dante devices such as a CL series console using standard Ethernet cables (CAT5e or better recommended). NOTE • Use STP (Shielded Twisted Pair) cable to prevent electromagnetic interference. Make sure that the metal parts of the plugs are electrically connected to the STP cable shield by conductive tape or comparable means. • Connect only Dante-compatible devices or Gigabit Ethernet compatible devices (including computers). • Cables up to 100 meters* long can be used. * Maximum usable length varies according to the cable used. o Dante [PRIMARY LINK/ACT] indicator Dante [PRIMARY 1G] indicator Dante [SECONDARY LINK/ACT] indicator Dante [SECONDARY 1G] indicator Displays the transmission status with the Dante network. LINK/ACT These indicators flash rapidly if the Ethernet cables are connected properly. 1G These indicators are lit when the Dante network is functioning as Gigabit Ethernet. !0 Exhaust vent The RSio64-D is equipped with a cooling fan. Air is exhausted through this vent, so take care that it is not blocked by any obstruction. Exhaust vent Owner’s Manual 13 Connections Connections Installing a Mini-YGDAI card 3. Align the two edges of the card with the guide rails inside the slot, and insert the card into the slot. Push the card all the way into the slot until the connector of the card is correctly inserted into the connector inside the slot. Before you install I/O cards in slots 1–4, you must check the Yamaha website to determine whether the card is compatible with the RSio64-D, and to verify the total number of Yamaha or third-party cards that can be installed in combination with that card. Yamaha website: http://www.yamahaproaudio.com/ To install an optional mini-YGDAI card, proceed as follows. 1. Make sure that the power is turned off. CAUTION Before installing a Mini-YGDAI I/O card in this unit, you must turn off the power of this unit and the power of the external power supply. You must also verify that the SLOT ACTIVE indicator is unlit. Malfunctions or electrical shock may occur if you fail to observe this caution. 2. Loosen the screws that hold the slot cover in Card place, and remove the slot cover. Keep the removed slot cover and screws in a safe place. 4. Secure the card using the screws that are attached to the card. If the card is not secured, malfunction or faulty operation may occur. Slot cover About Dante Dante is a network audio protocol developed by Audinate. It is designed to deliver multi-channel audio signals at various sampling and bit rates, as well as device control signals over a Gigabit Ethernet (GbE) network. Visit the Audinate website for more details on Dante: http://www.audinate.com/ More information on Dante is also posted on the Yamaha Pro Audio website: http://www.yamahaproaudio.com/ 14 Owner’s Manual Notes Regarding the Use of Network Switches Notes Regarding the Use of Network Switches We recommend a gigabit-compatible network switch that provides functions for controlling and monitoring the network (such as QoS). Do not use the EEE functionality (*) of network switches on a Dante network. Although mutual power consumption settings between switches that support the EEE functionality are adjusted automatically, there are some switches for which such mutual settings are not adjusted correctly. This may cause EEE to be enabled in Dante networks when it is not appropriate, resulting in poor synchronization performance and occasional dropouts. Therefore we strongly recommend the following. • If you use managed switches, please disable the EEE functionality. Do not use switches that prevent EEE functionality from being disabled. • When using unmanaged switches, do not use switches that support EEE functionality. EEE functionality cannot be disabled for such switches. * EEE (Energy Efficient Ethernet) is a technology that reduces switch power consumption during periods of low network traffic. It is also referred to as Green Ethernet and IEEE802.3az. Connecting AC Power 1. Turn the unit off. 2. Connect the plug on the AC power cord to the AC IN connector on the rear panel of the unit. 3. Connect the other side of the plug on the AC power cord to a power supply socket. NOTE • When removing the AC power cord, perform these steps in reverse. • Press the latch button on the plug to disconnect the power cord. WARNING • The RSio64-D has been designed assuming it a proper ground connection is used. To prevent electrical shock and damage to devices, use the included AC power cord to create a secure ground connection. If you do not know how to make a proper ground connection, contact your Yamaha dealer. • Be sure to use only the included power cord with this unit. Use of a different power cord could result in abnormal heat and electrical shock. CAUTION • Be sure to turn the power off before connecting or disconnecting the power cord. • Even when the power switch is turned off, a small amount of current is flowing through the unit. When you are not using the product for a long time, make sure to unplug the power cord from the power supply outlet. About Dante Controller Dante Controller is a software application that allows configuration and audio routing of Dante networks. Use this application if you plan to connect or set up Danteenabled devices that do not feature RSio64-D-native support. Please download the Dante Controller application from the website listed below. Please note that Dante Controller Version 3.2.1 or later supports RSio64-D. http://www.yamahaproaudio.com/ Power on and off To prevent loud sounds that might harm your hearing or damage equipment downstream, poweron each unit in the order of the signal flow. When turning the power off, reverse this order. To run Dante Controller, a computer must feature a GbEcompatible Ethernet connector. Refer to the Dante Controller owner’s manual for details on Dante Controller. Owner’s Manual 15 Specifying the audio routing  PATTERN 4 The inputs and outputs of Slots 1 and 2, and Slots 3 and 4 are interconnected. Specifying the audio routing The RSio64-D provides seven preset patterns of audio routing that connect each slot to the Dante network. There is also one user pattern (page 17) which the user can edit. Use the front panel ROUTING [PATTERN] rotary switch to select the routing. Setting the rotary switch to 1–7 selects preset routing patterns 1–7, and setting it to 0 selects the user routing pattern. Making the setting You can select the routing pattern even when the power is on. Your selection is applied three seconds after you switch the routing pattern. The preset routing patterns are described below.  PATTERN 1 Dante is connected one-to-one with each slot’s input/ output. 48k/44.1k 96k/88.2k 48k/44.1k 96k/88.2k SLOT 1 1-16 1-8 1-16 1-8 SLOT 2 1-16 1-8 SLOT 3 1-16 1-8 17-32 9-16 Dante 33-48 17-24 SLOT 4 1-16 1-8 SLOT 1 1-16 1-8 SLOT 2 1-16 1-8 SLOT 3 1-16 1-8 SLOT 4 1-16 1-8 48k/44.1k 96k/88.2k 1-16 1-8 17-32 9-16 Dante 33-48 17-24 49-64 25-32  PATTERN 5 Dante inputs 1–16* are distributed to the outputs of each slot. 48k/44.1k 96k/88.2k SLOT 1 1-16 1-8 SLOT 2 1-16 1-8 SLOT 3 1-16 1-8 SLOT 4 1-16 1-8 48k/44.1k 96k/88.2k 1-16 1-8 17-32 9-16 Dante 33-48 17-24 49-64 25-32  PATTERN 6 Dante inputs 1–16* are distributed to the outputs of slots 1 and 2, and Dante inputs 17–32* are distributed to the outputs of slots 3 and 4. 48k/44.1k 96k/88.2k SLOT 1 1-16 1-8 SLOT 2 1-16 1-8 SLOT 3 1-16 1-8 SLOT 4 1-16 1-8 48k/44.1k 96k/88.2k 1-16 1-8 17-32 9-16 Dante 33-48 17-24 49-64 25-32 49-64 25-32  PATTERN 2 The inputs of slot 1 are distributed to the outputs of slots 2–4. 48k/44.1k 96k/88.2k SLOT 1 1-16 1-8 SLOT 2 1-16 1-8 SLOT 3 1-16 1-8 SLOT 4 1-16 1-8 48k/44.1k 96k/88.2k 1-16 1-8 17-32 9-16 Dante 33-48 17-24 49-64 25-32  PATTERN 7 Dante 1–32* and slots 1–2 are connected one-to-one, and the inputs and outputs of slots 3 and 4 are connected respectively to each other. 48k/44.1k 96k/88.2k SLOT 1 1-16 1-8 SLOT 2 1-16 1-8 SLOT 3 1-16 1-8 SLOT 4 1-16 1-8 48k/44.1k 96k/88.2k 1-16 1-8 17-32 9-16 Dante 33-48 17-24 49-64 25-32 *At 48/44.1 kHz  PATTERN 3 The inputs of slot 1 are distributed to the outputs of slot 2, and the inputs of slot 3 are distributed to the outputs of slot 4. 16 48k/44.1k 96k/88.2k 48k/44.1k 96k/88.2k SLOT 1 1-16 1-8 SLOT 2 1-16 1-8 SLOT 3 1-16 1-8 SLOT 4 1-16 1-8 48k/44.1k 96k/88.2k 1-16 1-8 17-32 9-16 Dante 33-48 17-24 49-64 25-32 Owner’s Manual NOTE • If the inputs/outputs of an installed Mini-YGDAI card cannot be assigned in 16-channel units, such as for a 4-channel or a 8-channel card, audio routing signals from such card are muted by the slot (e.g., if the Mini-YGDAI card is an 8channel card, channels 9–16 are muted). • For different sampling frequencies, the channels of the routing pattern are switched automatically, as shown above. However if SRC is on, the number of the slot’s channels may change, so there may be cases in which you are unable to use the above patterns as you would like. In such cases, use the user pattern. For example when the sampling frequency is 88.2/96 kHz, Dante channels 1–8, 9–16, 17–24, and 25-32 are available, but if SRC is on for SLOT 1, and the sampling frequency of that slot is 44.1/48 kHz, then channels 1–16 are available for SLOT 1. Editing the user pattern Editing the user pattern The user pattern lets you freely specify the routing between Dante and the slots. To edit the user pattern, use R Remote V4 or a CL/QL series console. For details, refer to the respective manuals. About the number of input/ output channels The number of audio input/output channels is as follows. Slots The slots can provide up to 64 channels (16 channels per slot) of audio signal input/output. About R Remote V4 This is an application that lets you view and edit the settings of R series units such as the RSio64-D. R Remote V4 can be downloaded from the following website. http://www.yamahaproaudio.com/ Frequency Input Output 44.1 kHz 16 ch 16 ch 48 kHz 16 ch 16 ch 88.2 kHz 8 ch 8 ch 96 kHz 8 ch 8 ch NOTE • If an analog Mini-YGDAI card is installed and the corresponding slot’s SRC is turned on, that slot uses the RSio64-D’s internal 48 kHz clock. • If this unit’s sampling frequency is set to 88 kHz or 96 kHz, and you want to install a Mini-YGDAI card that does not support 88.2 kHz or 96 kHz, you should turn SRC on for that slot. If SRC is off, audio signals will not be output. Dante Frequency Input Output 44.1 kHz 64 ch 64 ch 64 ch 48 kHz 64 ch 88.2 kHz 32 ch 32 ch 96 kHz 32 ch 32 ch NOTE To change the Dante clock frequency, use Dante Controller. Owner’s Manual 17 Word Clock Word Clock Selecting a word clock source Use the WORD CLOCK select key on the front panel to select the word clock source. The unit’s clock is synced with the selected word clock source. WCLK IN This is lit if the RSio64-D is using the word clock that is being input from the rear panel [WORD CLOCK IN] connector. This flashes if there is no valid word clock input*1. SLOT1 1/2 This is lit if the channel 1/2 word clock of slot 1 is being used. This flashes if there is no valid word clock input*1. The channel 7/8 word clock is used when using the MY8-AEB*2. DANTE This is lit if the Dante network’s word clock*3 is being used. (If no valid Dante signal is being input, the clock generated by the internal Dante module is used.) *1 When this is flashing, the unit uses the Dante word clock to operate and perform input/output. *2 In order to use MY8-AEB, set AE  RSVD switch to the RSVD position. *3 If you want to change the frequency of the Dante word clock, use Dante Controller. About word clock • If you select “WCLK IN” or “SLOT1 1/2,” the unit is automatically set to Enable Sync To External (synchronize to an external clock). If you select “DANTE,” Enable Sync To External is automatically turned off. If you select “WCLK IN” or “SLOT1 1/2,” and this unit is a clock slave of the Dante network, the same clock should be input to the clock master device and to this device. You can use Dante Controller to check which device is the current clock master. • If the word clock signal from the selected word clock source is cut off, the unit switches to the “DANTE” setting (Enable Sync To External automatically turns off), and operates with the clock frequency that is specified by Dante. 18 Owner’s Manual SRC (Sampling Rate Converter) • Even if the Mini-YGDAI card installed in a slot is not synchronized with the Dante network, connection is possible without having to change the respective clocks. • The output signal from the slot synchronizes with the clock from the slot’s input signal or with the clock that is input via WORD CLOCK IN. However, if the card’s SRC is enabled, the main unit’s SRC will be disabled, and signals in sync with the main unit’s clock will be output. Other functions Other functions IDENTIFY Remote control From a Yamaha CL/QL series console, from R Remote V4, or from Dante Controller, you can identify a specific RSio64-D unit from among multiple network-connected devices. When you specify the IDENTIFY operation, all front panel indicators on that unit except for the POWER (INT/EXT) indicator will flash for ten seconds. The same operations performed from the RSio64-D’s front panel, such as turning SRC on/off, can be performed from a device that supports remote control. NOTE For the latest information about remote control compatible devices, refer to the Yamaha Pro Audio website: http://www.yamahaproaudio.com/ Remote controllable parameters Parameter Description SRC ON/OFF Turns SRC on or off. WORD CLOCK Selects the source used as the master clock. USER PATTERN Lets you specify the user routing pattern. DANTE PATCH* Lets you change the Dante patch. ROUTING PATTERN Displays the pattern number. SRC SOURCE CLOCK Shows the source used by the SRC. POWER INT/EXT Shows the power supply status. Panel lock You can lock the panel to prevent unintended changes and operations. While the lock is engaged, all controllers on the front panel are inoperable. To engage the lock, press and hold the SLOT 1 and SLOT 4 [SRC] keys for at least 3 seconds. All front panel indicators (except the power indicator) flash, and operation is locked. To disengage the lock, press and hold the SLOT 1 and SLOT 4 [SRC] keys for at least 3 seconds. SYSTEM/SYNC STATUS Shows the system sync status. DEVICE LABEL Shows the UNIT ID/device name (label). * DANTE PATCH: Specifies which channels of the CL/QL series console are input to which of the RSio64-D’s Dante 1–64 channels. Press simultaneously for at least three seconds NOTE • If you turn off the power while panel lock is engaged, panel lock will still be engaged the next time the power is turned on. • Even if the front panel is locked, you can use remote control to make changes to the settings. Owner’s Manual 19 Other functions Initializing the RSio64-D To return (initialize) the internal memory to its factory-set state, for example if you move the unit to a different location, proceed as follows. 1. Turn the unit off. 2. On the front panel, set device setting DIP switch 7 down and switch 8 up (INITIALIZE). Updating the RSio64-D’s hardware settings If the SLOT 1–4 [LOCK] indicators and the SLOT 1–4 [SRC] indicators are alternately flashing red and the unit does not start up, it may be that the unit’s hardware settings were not updated when updating the firmware. In this case, proceed as follows to update the RSio64-D’s hardware settings. ON 1. 7 8 1 2 3 4 5 6 7 8 3. Turn the unit on. Initialization begins. When initialization is completed, the SLOT 1–4 [LOCK] and SLOT 1–4 [SRC] indicators flash green and red alternately. While holding down the SLOT 3 [SRC] key, turn the power on again. Updating of the unit’s hardware settings begins. During the update, the SLOT 1 [LOCK] indicator and the SLOT 1 [SRC] indicator light simultaneously. To indicate the status during the update process, both the [LOCK] indicator and the [SRC] indicator successively light in the order of SLOT 2  SLOT 3  SLOT 4. When the update is completed, the eight indicators flash once and then return to the normal illumination status. 4. Verify that initialization is completed, and turn the unit off. 5. Set device setting DIP switches 7 and 8 both up (NORMAL). If you are using the card’s SRC 7 8 6. Turn the unit on. The following parameters are initialized. Parameter SLOT 1–4 SRC Initialized setting OFF WORD CLOCK SELECT DANTE/48 kHz USER PATTERN Same routing settings as preset pattern 1 STATIC IP (Manual) 0.0.0.0 Panel Lock Lock defeated Dante patches All off Dante device label Y001-Yamaha-RSio64-D-123456 (*1) (*1) The third and fourth characters of the Dante device label depend on device setting DIP switch 1 and the SETUP [UNIT ID] rotary switch. The lower six digits depend on the lower six digits of the unit’s MAC address. * When shipped from the factory, all of the device setting DIP switches are set to the upward position. 20 Owner’s Manual If your card features an SRC (MY8-AE96S), you can use the card’s SRC instead of the main unit’s SRC. To use the card’s SRC, set device setting DIP switch 6 on the front panel to the down position. When this function is enabled, the [SRC] key on the front panel of the main unit will be used to turn the card’s SRC on or off. • Changes made to device setting DIP switch 6 will become effective in three seconds. • For a slot that has a card without an SRC inserted, the [SRC] key will turn the unit’s SRC on or off regardless of the switch position. Troubleshooting Troubleshooting Device settings and DIP switch settings are not applied  Turn off the power before changing the setting. If you change The following is an abbreviated list of frequently asked questions in the past. Please check it if you run into similar problems and need help. Power does not turn on, power indicator does not light  Connect the power cord properly (page 15).  Turn the [POWER] switch ON. If the power still will not come on, contact your Yamaha dealer. SLOT 1–4 [LOCK] indicators and SLOT 1–4 [SRC] indicators alternately flash red, and the unit does not start up the setting while the power is on, the changed setting is not applied until the power is turned off and on again. What are the computer requirements for updating the firmware?  For information about updating the unit, refer to the firmware update guide for each product and the following website. http://www.yamahaproaudio.com/ Cannot update  The problem may be solved by disabling any antivirus software and the firewall of the computer. For other details, refer to the firmware update guide available on the website. http://www.yamahaproaudio.com/  The unit’s hardware settings was not updated after updating the firmware. Alternatively, the unit’s hardware settings may be damaged. While holding down the SLOT 3 [SRC] key, turn the power on again to update the unit’s hardware settings (page 20). If the power still will not come on, contact your Yamaha dealer. Sound is not output  Connect the cables properly.  Verify that a signal is being output from the corresponding device.  If the SLOT 1–4 [LOCK] indicator is flashing red or lit red, respecify the correct clock.  Is the patch of the Dante network set up correctly by Dante Controller?  On the unit to which the RSio64-D is connected, is the word clock set in a way that is compatible with the Dante network?  Check whether the user pattern setting is correct.  Check whether the routing pattern selection might be incorrect. Audio cuts out or distorts.  Is the slot’s input frequency selected correctly?  If [SLOT] or [WCLK IN] is selected as the word clock source, change it to [DANTE]. Keep in mind that if this remedies the problem, the clocks for the Dante network and the unit will not be synced. In this case, this unit must be acting as the clock master for the Dante network. If this still does not solve the problem, check the SLOT 1–4 [LOCK] indicators and the WORD CLOCK indicators, and take the appropriate action. For details, refer to the Dante Controller User Guide available on the website. http://www.yamahaproaudio.com/ Can’t operate the panel  Could panel lock be activated? The RSio64-D is not recognized on the Dante network  Does the Dante [UNIT ID] conflict with another Dante-compatible device made by Yamaha?  Is the network switch working properly? The problem may be solved by turning the network switch on again.  Is the cable defective? The problem may be solved by replacing the cable. What devices should I update?  It is necessary to update multiple devices depending on the version of each device. For details, refer to the firmware compatibility available on the website. http://www.yamahaproaudio.com/ How can the Dante input and output signals be patched?  Use Dante Controller to configure the audio routing (patching) of the Dante network. For details, refer to the Dante Controller User Guide available on the website. http://www.yamahaproaudio.com/ Is it possible to receive the input signal from RSio64-D by a separate mixer?  It can be configured using the Dante Controller. For details, refer to the Dante Controller User Guide available on the website. http://www.yamahaproaudio.com/ In the case of a Yamaha CL/QL series unit, settings can be made from the I/O DEVICE screen. I want to change the RSio64-D settings from the mixer I want to know the devices that can remotely configure the RSio64-D  For details on RSio64-D remote control, refer to the following website. http://www.yamahaproaudio.com/ What is the latency of the Dante network?  The latency of the Dante network can be specified using Dante Controller. For details, refer to the manuals for each product. An internal error message such as “firmware mismatch” is displayed on the device connected to the RSio64-D.  Make sure that each device has a compatible version. For details, refer to the firmware compatibility information available on the website. http://www.yamahaproaudio.com/ Owner’s Manual 21 Messages Messages Errors, warnings, and certain other types of information are displayed via the RSio64-D front panel indicators. Messages are also displayed in the Dante Controller Error Status field. Each indicator lights or flashes as described below: No call-out The indicator is off. Light The indicator remains lit steadily. Flash The indicator continues to flash. Flash x2 The indicator flashes twice cyclically. Flash x3 The indicator flashes three times cyclically. The following errors affect the settings or the hardware. However, the device will still be usable. The green SYSTEM indicator will light, and all indicators for all I/O channels will work normally. In addition, certain errors will cause the red SYSTEM indicator to light or flash. [SYSTEM] Indicators (green) Lit (green) Error Messages Lit If one of the following errors has occurred, the device will not operate. Until the error is resolved, the green SYSTEM indicator will be turned off, and all indicators for all I/O channels will continue to flash. In addition, certain errors will cause the red SYSTEM indicator to light or flash. [SYSTEM] Indicators (red) Description Flash x3 (red) Communication cannot occur because the MAC address setting has been corrupted. The device has failed. Contact your Yamaha dealer for repair. UNIT ID is not unique. Set a unique UNIT ID number within the Dante network. The device’s DIP switches are not set correctly. Check the DIP switch settings, and set them correctly. Flash 22 (red) (red) Owner’s Manual (green) Lit The cooling fan has stopped. Check that nothing is caught in the fan. If the problem persists, consult your Yamaha dealer. The internal memory has been corrupted. When using the unit in [NORMAL] mode, if the problem persists even after turning the power off and on again, consult your Yamaha dealer. You changed the positions of the device setting DIP switches or rotary switch, or changed the Dante settings from Dante Controller. Therefore, the positions of the device setting DIP switches do not match the actual Dante settings. If the Device Lock setting was enabled from Dante Controller, disable the setting, or check the device setting DIP switch positions, and set them to accommodate the current situation. Flash x3 (red) Lit Possible Solution Reduce the number of flows by, for The number of example, using Dante transmit Dante Controller to flows exceeded the change some of limit. the transmit flows to multicast. Flash x2 Possible Solution Lit (red) Lit Flash An internal error has occurred. Flash x2 (red) (green) (red) Description Warning Messages Warning Messages Information Messages The indicators will light and/or flash as shown until the cause is resolved. If the green [SYNC] indicator is unlit, the unit’s clock is unconfirmed. The indicators will remain lit and/or flashing cyclically to report the status. If the orange [SYNC] indicator is unlit, the unit is operating normally. If the green [SYNC] indicator is unlit, the unit’s clock is unconfirmed. [SYNC] Indicators Description (orange) The word clock is not set correctly. Flash (orange) Dante Network cir- cuit is broken. Flash x2 Other Dante-compatible devices (orange) cannot be found due to an incorrectly-wired Dante Flash x3 Network. Possible Solution Set the clock master and sampling frequency correctly on the RSio64-D-native device or in Dante Controller. (green) Make sure that the Ethernet cables are connected correctly. (green) Description (orange) A non-GbE-com- patible device is connected. Light or flash (green) Light or flash (green) Light or flash Light Description Muted during startup, or in the (orange) process of synchronization. Lit Make sure that the Ethernet cables are not removed or short-circuited. Flash (green) If the green indicator is flashing, the unit is the clock master. If the green indicator is lit, the unit is the clock slave and the clock is synchronized. [SYNC] Indicators [SYNC] Indicators Lit Explanation Please wait until started has completed or until the unit has finished synchronization. It may take up to 45 seconds for completion. The unit is funcThe unit is operattioning correctly as ing as the word the word clock clock master. master. The unit is functioning correctly as the word clock slave. The unit is operating as the clock slave and the clock is synchronized. Possible Solution When transferring audio via Dante, use device that supports GbE. The [SECONDARY] connector (orange) has taken over communications during redundant Flash network operation. Check the circuit connected to the [PRIMARY] connector. An abnormality has occurred on the circuit con(orange) nected to the [SECONDARY] connector during Flash x2 redundant network operation. Check the circuit connected to the [SECONDARY] connector. Owner’s Manual 23 Specifications Specifications General Specifications Sampling Frequency External Clock Frequency Range Signal Delay 44.1 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm 48 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm 88.2 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm 96 kHz +4.1667 %/+0.1 %/-0.1 %/-4.0 % ±200 ppm SLOT IN (MY8-AE96) to SLOT OUT (MY8-AE96) (@ fs=96 kHz, SRC off, Internal routing) Less than 0.2 ms SLOT IN (MY8-AE96) to Rio3224-D AES OUT (@ fs=48 kHz, through Dante, SRC off) (Dante Receive Latency set to 0.25 ms) Less than 0.8 ms SLOT IN (MY8-AE96) to Rio3224-D AES OUT (@ fs=96 kHz, through Dante, SRC off) (Dante Receive Latency set to 0.25 ms) Less than 0.5 ms SLOT IN (MY8-AE96) to Rio3224-D AES OUT (@ fs=96 kHz, through Dante, SRC on, SLOT fs=48 kHz) (Dante Receive Latency set to 0.25 ms) Less than 1.1 ms SRC SRC Lock Range: 39.7 kHz – 101.7 kHz Sample Rate Ratio Limit: 1:2.6 to 2.6:1 Dimensions (W x H x D) and Net Weight 480 x 88 x 365 mm, 6.1 kg Power Requirements (wattage) 60 W Power Requirements (voltage and hertz) 100-240 V 50/60 Hz Temperature Range Operating temperature range: 0 – 40 °C Storage temperature range: -20 – 60 °C Included Accessories Owner’s Manual, AC power cord Digital I/O Characteristics Terminal Format Data Length Level Audio I/O Connector Primary/Secondary Dante 24 bit or 32 bit 1000 BASE-T 64 ch Input/64 ch Output@48 kHz 32 ch Input/32 ch Output@96 kHz etherCON CAT5e Control I/O Characteristics Terminal Format Level Connector WORD CLOCK IN — TTL/75 Ω terminated BNC External DC Input Characteristics Terminal Format Level Connector EXT DC INPUT*1 — — XLR-4-32 type*2 *1: Power Requirements: +24V±2V, 3A *2: 1pin=GND, 2pin=NC, 3pin=NC, 4pin=+24V * The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file. 166 Owner’s Manual Dimensions Dimensions 365 360 430 1 2 3 4 5 6 7 8 ON ON 88 480 1 2 3 4 Unit: mm Owner’s Manual 167 Block Diagram Block Diagram AUDIO CLOCK SLOT1 16 16 1 1 SLOT CLOCK SLOT1 WCLK IN SRC OFF 2 Dante PRIMARY 64 Dante 2 SRC WCLK CH1/2 3 64 SRC w/ thru Dante SECONDARY SLOT2 Same above WCLK IN 1 8 channels when SLOT CLOCK is 96kHz. 2 32 channels when SYSTEM CLOCK is 96kHz. 3 Channels 7/8 when using the MY8-AEB. 168 Owner’s Manual SLOT1 1/2 WCLK IN Same above WORD CLOCK SLOT4 Same above SYSTEM CLOCK SLOT3 Dante 128x128 Patch Owner’s Manual 169 ADDRESS LIST NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario, M1S 3R1, Canada Tel: +1-416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: +1-714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 Piso 9, Col. San José Insurgentes, Delegación Benito Juárez, México, D.F., C.P. 03900 Tel: +52-55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda. Rua Fidêncio Ramos, 302 – Cj 52 e 54 – Torre B – Vila Olímpia – CEP 04551-010 – São Paulo/SP, Brazil Tel: +55-11-3704-1377 ARGENTINA Yamaha Music Latin America, S.A., Sucursal Argentina Olga Cossettini 1553, Piso 4 Norte, Madero Este-C1107CEK, Buenos Aires, Argentina Tel: +54-11-4119-7000 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES Yamaha Music Latin America, S.A. Edif. Torre Banco General, Piso 7, Urbanización Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, República de Panamá Tel: +507-269-5311 EUROPE THE UNITED KINGDOM/IRELAND Yamaha Music Europe GmbH (UK) Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, U.K. Tel: +44-1908-366700 GERMANY Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany Tel: +49-4101-303-0 NETHERLANDS/BELGIUM/ LUXEMBOURG Yamaha Music Europe Branch Benelux Clarissenhof 5b, 4133 AB Vianen, The Netherlands Tel: +31-347-358040 FRANCE Yamaha Music Europe 7 rue Ambroise Croizat, Zone d'activités de Pariest, 77183 Croissy-Beaubourg, France Tel: +33-1-6461-4000 ITALY Yamaha Music Europe GmbH, Branch Italy Via Tinelli N.67/69 20855 Gerno di Lesmo (MB), Italy Tel: +39-039-9065-1 SPAIN/PORTUGAL Yamaha Music Europe GmbH Ibérica, Sucursal en España Ctra. de la Coruna km. 17,200, 28231 Las Rozas de Madrid, Spain Tel: +34-91-639-88-88 GREECE Philippos Nakas S.A. The Music House 19th klm. Leof. Lavriou 190 02 Peania – Attiki, Greece Tel: +30-210-6686168 SWEDEN/FINLAND/ICELAND Yamaha Music Europe GmbH Germany filial Scandinavia JA Wettergrensgata 1, 400 43 Göteborg, Sweden Tel: +46-31-89-34-00 DENMARK Yamaha Music Denmark, Fillial of Yamaha Music Europe GmbH, Tyskland Generatorvej 8C, ST. TH. , 2860 Søborg, Denmark Tel: +45-44-92-49-00 NORWAY Yamaha Music Europe GmbH Germany Norwegian Branch Grini Næringspark 1, 1332 Østerås, Norway Tel: +47-6716-7800 RUSSIA Yamaha Music (Russia) LLC. Room 37, entrance 7, bld. 7, Kievskaya street, Moscow, 121059, Russia Tel: +7-495-626-5005 OTHER EUROPEAN COUNTRIES Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 AFRICA SWITZERLAND/LIECHTENSTEIN Yamaha Music Europe GmbH, Branch Switzerland in Thalwil Seestrasse 18a, 8800 Thalwil, Switzerland Tel: +41-44-3878080 AUSTRIA/BULGARIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, 1100 Wien, Austria Tel: +43-1-60203900 CZECH REPUBLIC/HUNGARY/ ROMANIA/SLOVAKIA/SLOVENIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, 1100 Wien, Austria Tel: +43-1-60203900 POLAND/LITHUANIA/LATVIA/ESTONIA Yamaha Music Europe GmbH Sp.z o.o. Oddział w Polsce ul. Wielicka 52, 02-657 Warszawa, Poland Tel: +48-22-880-08-88 MALTA Olimpus Music Ltd. Valletta Road, Mosta MST9010, Malta Tel: +356-2133-2093 ASIA Yamaha Music Gulf FZE JAFZA-16, Office 512, P.O.Box 17328, Jebel Ali FZE, Dubai, UAE Tel: +971-4-801-1500 Yamaha Music & Electronics (China) Co.,Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: +86-400-051-7700 INDIA Yamaha Music India Private Limited P-401, JMD Megapolis, Sector-48, Sohna Road, Gurgaon-122018, Haryana, India Tel: +91-124-485-3300 INDONESIA PT. Yamaha Musik Indonesia (Distributor) Yamaha Music Center Bldg. Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: +62-21-520-2577 KOREA Yamaha Music Korea Ltd. 8F, Dongsung Bldg. 21, Teheran-ro 87-gil, Gangnam-gu, Seoul, 06169, Korea Tel: +82-2-3467-3300 MALAYSIA Yamaha Music (Malaysia) Sdn. Bhd. No.8, Jalan Perbandaran, Kelana Jaya, 47301 Petaling Jaya, Selangor, Malaysia Tel: +60-3-78030900 SINGAPORE Yamaha Music (Asia) Private Limited Block 202 Hougang Street 21, #02-00, Singapore 530202, Singapore Tel: +65-6740-9200 TAIWAN Yamaha Music & Electronics Taiwan Co.,Ltd. 2F., No.1, Yuandong Rd. Banqiao Dist. New Taipei City 22063, Taiwan, R.O.C. Tel: +886-2-7741-8888 THAILAND Siam Music Yamaha Co., Ltd. 3, 4, 15, 16th Fl., Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan, Bangkok 10330, Thailand Tel: +66-2215-2622 VIETNAM Yamaha Music Vietnam Company Limited 15th Floor, Nam A Bank Tower, 201-203 Cach Mang Thang Tam St., Ward 4, Dist.3, Ho Chi Minh City, Vietnam Tel: +84-8-3818-1122 OTHER ASIAN COUNTRIES Yamaha Corporation Sales & Marketing Division 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 OCEANIA AUSTRALIA MIDDLE EAST TURKEY Yamaha Music Europe GmbH Merkezi Almanya Türkiye İstanbul Şubesi Maslak Meydan Sodak, Spring Giz Plaza Bagimsiz Böl. No:3, Sariyer Istanbul, Turkey Tel: +90-212-999-8010 CYPRUS THE PEOPLE’S REPUBLIC OF CHINA Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany Tel: +49-4101-303-0 Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, VIC 3006, Australia Tel: +61-3-9693-5111 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation Sales & Marketing Division 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 OTHER COUNTRIES Yamaha Music Gulf FZE JAFZA-16, Office 512, P.O.Box 17328, Jebel Ali FZE, Dubai, UAE Tel: +971-4-801-1500 HEAD OFFICE Yamaha Corporation, Commercial Audio Business Division PA46 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, Japan 430-8650 170 Owner’s Manual MEMO Yamaha Pro Audio global website http://www.yamahaproaudio.com/ Yamaha Downloads http://download.yamaha.com/ Manual Development Group © 2015 Yamaha Corporation Published 12/2016 POHD-B0 Printed in China ZX32880