Yamaha DV-S6165 Handleiding

Merk: Yamaha

Model: DV-S6165

Categorie: Dvd spelers

Type: Handleiding

DV-S6165

DVD PLAYER

LECTEUR DVD

DV-S6165

3139 245 30151

00cv_DV-S6165_U.fm Page 1 Monday, June 9, 2008 3:26 PM

Black process 45.0° 240.0 LPI

i En

IMPORTANT SAFETY INSTRUCTIONS

■ Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle

is intended to alert you to the presence of important

operating and maintenance (servicing) instructions

in the literature accompanying the appliance.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15 Battery usage CAUTION - To prevent battery leakage

which may result in bodily injury, property damage, or

damage to the unit:

– Install all batteries correctly, + and - asmarked on

the unit.

– Do not mix batteries (old and new or carbon and

alkaline, etc.).

– Remove batteries when the unit is not used for a

long time.

16 Apparatus shall not be exposed to dripping or splashing.

17 Do not place any sources of danger on the apparatus (e.g.

liquid filled objects, lighted candles).

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

ii En

We Want You Listening For A Lifetime

Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying

blaring or distortion - and, most importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries

Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume

levels.

FCC INFORMATION (for US customers)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications

not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class

“B” digital devices.

Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential

environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio

frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference

harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference

will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning

the product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this

type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe

Ave. Buena Park, CA90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

For Customer Use:

Read carefully the information located at the rear

panel of this unit and enter below the Serial No.

Retain this information for future reference.

Model No.

Serial No. __________________________

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

AVOID DIRECT EXPOSURE TO THE BEAM

INVISIBLE LASER RADIATION WHEN OPEN

DANGER:

DO NOT STARE INTO BEAM

INVISIBLE LASER RADIATION WHEN OPEN

CAUTION:

iii En

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this unit in a well ventilated, cool, dry, clean

place — away from direct sunlight, heat sources,

vibration, dust, moisture, or cold. In a cabinet, allow

about 2.5 cm (1 inch) of free space all around this

unit for adequate ventilation.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot, nor locate this unit in an

environment with high humidity (i.e., a room with a

humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage

to this unit, and/or personal injury.

5 Avoid installing this unit in a location where foreign

objects may fall onto this unit or where this unit

may be exposed to liquid dripping or splashing. On

the top of this unit, do not place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall,

spilling the liquid and causing an electrical shock to

the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use excessive force on switches, knobs and/

or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using

this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this unit,

and/or personal injury. Yamaha will not be held

responsible for any damage resulting from use of

this unit with a voltage other than as specified.

13 Do not attempt to modify or fix this unit. Contact

qualified Yamaha service personnel when any

service is needed. The cabinet should never be

opened for any reason.

14 When not planning to use this unit for long periods

of time (i.e., vacation), disconnect the AC power

plug from the wall outlet.

15 Be sure to read the “Troubleshooting” section on

common operating errors before concluding that

this unit is faulty.

16 Before moving this unit, press STANDBY/ON to

set the unit in standby mode, then disconnect the

AC power plug from the wall outlet.

17 Install this unit near the AC outlet and where the AC

power plug can be reached easily.

18 The batteries shall not be exposed to excessive heat

such as sunshine, fire or the like.

LASER SAFETY

This unit employs a laser. Due to possible eye injury,

only a qualified service person should remove the cover

or attempt to service this device.

DANGER

This unit emits visible laser radiation when open. Avoid

direct eye exposure to beam.

When this unit is plugged into a wall outlet, do not

place your eyes close to the opening of the disc tray and

other openings or look inside.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.

The unit is not disconnected from the AC power

source as long as it is connected to the wall outlet,

even if this unit itself is turned off. This state is called

the standby mode. In this state, this unit is designed

to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug

to wide slot and fully insert.

This Class B digital apparatus complies with

Canadian ICES-003.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

Contents

English

1 En

Introduction ...................................3

About this manual........................................3

Supplied accessories ..................................3

Region codes ...............................................3

Playable disc formats ..................................4

Cleaning discs..............................................4

Patent information .......................................5

Functional Overview .....................6

Front panel ...................................................6

Rear panel.....................................................7

Remote control.............................................8

Connections...................................9

General notes on connections ...................9

Audio connections.......................................9

Digital connection ...............................................9

Analog connection...............................................9

Video connections .....................................10

Component video jacks <A>.............................10

S-video jack ...............................................10

Composite video jack <C>................................10

SCART terminal <D>

(Europe and Russia models only)......................10

HDMI connection........................................11

HDMI jack.........................................................11

Other connections .....................................12

USB port............................................................12

Remote control jacks.........................................12

Getting Started ............................13

Step 1: Inserting batteries into the remote

control ......................................................13

Using the remote control...................................13

Step 2: Turning on the power ...................13

Step 3: Setting a TV type/display and

language...................................................14

Setting a color system for your TV ...................14

Setting an aspect ratio for your TV ...................15

Setting the OSD Language................................15

Setting the audio, subtitle, and disc menu

languages (DVD-Video only) ...........................16

Playback Operation .................... 17

Basic operation.......................................... 17

Selecting a track/chapter...................................17

Searching backward/forward ............................17

Repeat/Shuffle functions .......................... 17

Repeat/Shuffle playback ...................................17

Repeating a section within a chapter/track .......18

Operations for video playback

(DVD/VCD/SVCD)..................................... 18

Using the disc menu..........................................18

Playback in slow motion...................................18

Zooming pictures in/out....................................18

Resuming playback from the last stopped point

...........................................................................18

Using the on-screen display (OSD) ..................19

Special DVD features ................................ 20

Playing by title ..................................................20

Selecting an audio language/format and subtitle

language ............................................................20

Special VCD/SVCD features...................... 20

Using the playback control (PBC) menu ..........20

Playing data discs

(MP3/WMA/WMV/JPEG/DivX

)............... 21

Selecting a folder and track/file ........................21

Special picture disc features.................... 21

Using the preview function...............................21

Zooming pictures in/out....................................22

Playback with multi-angles...............................22

Playing MP3 music and JPEG pictures

simultaneously ..................................................22

Special DivX

features.............................. 22

Using the interactive menu ...............................22

Selecting an audio/subtitle language.................22

Using a USB device................................... 23

Supported USB devices ....................................23

Playing data files...............................................23

Contents

Continued

Contents

2 En

Setup Menu..................................25

Menu overview ...........................................25

Setup menu operation ...............................27

General setup menu ..................................28

Locking/Unlocking the disc for viewing...........28

Recording CD tracks onto your USB device ....28

Programming disc tracks

(except MP3/WMA/WMV/JPEG/DivX

)........30

Dimming the front panel display.......................30

OSD language ...................................................30

Setting the screen saver .....................................31

Setting the sleep timer.......................................31

Displaying the DivX

VOD registration code

...........................................................................31

Audio setup menu......................................31

Setting the analog output...................................31

Setting the digital output ...................................32

Turning the HDMI audio on/off........................32

Turning the night mode on/off ..........................33

Video setup menu ......................................33

TV type..............................................................33

Setting the TV display.......................................33

Turning the progressive scan function on/off ...34

Adjusting picture settings..................................34

Turning the black level on/off...........................35

Turning the closed caption on/off .....................35

Switching YUV/RGB

(Europe and Russia models only)......................36

Setting the HDMI video ....................................36

Preference setup menu .............................37

Audio, subtitle and disc menu...........................37

Restricting playback with parental control........37

Selecting playback of VR format ......................38

Selecting the data disc menu .............................38

Selecting DivX

external subtitle group

(except Korea model)........................................38

Selecting the PBC (playback control) function

...........................................................................39

Setting the auto standby function ......................39

Changing the password .....................................40

Resetting the system..........................................40

Language Codes ......................... 41

Troubleshooting.......................... 42

Glossary....................................... 46

Specifications.............................. 48

Europe model

Information for Users on Collection and

Disposal of Old Equipment and used Batteries

These symbols on the products, packaging,

and/or accompanying documents mean that

used electrical and electronic products and

batteries should not be mixed with general

household waste. For proper treatment,

recovery and recycling of old products and

used batteries, please take them to applicable

collection points, in accordance with your

national legislation and the Directives 2002/

96/EC and 2006/66/EC. This symbol mark is

according to the EU directive 2002/96/EC.

By disposing of these products and batteries

correctly, you will help to save valuable

resources and prevent any potential negative

effects on human health and the environment

which could otherwise arise from

inappropriate waste handling.

For more information about collection and

recycling of old products and batteries, please

contact your local municipality, your waste

disposal service or the point of sale where

you purchased the items.

[Information on Disposal in other

Countries outside the European

Union]

These symbols are only valid in the European

Union. If you wish to discard these items,

please contact your local authorities or dealer

and ask for the correct method of disposal.

Note for the battery symbol (bottom

two symbol examples):

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

3 En

Introduction

English

Thank you for purchasing this unit. This

owner’s manual explains the basic operation

of this unit.

• Illustrations in this manual are based on the

Europe model unless otherwise specified.

• Notes contain important information about

safety and operating instructions.

• y indicates a tip for your operation.

• This manual is printed prior to production.

Design and specifications are subject to

change in part as a result of improvements,

etc. In case of differences between the

manual and the product, the product has

priority.

For Europe and Russia models

• Remote control

• Two batteries (AAA, R03, UM-4) for the

remote control

• RCA stereo cable

• Composite video cable

For U.S.A., Canada, Central and South

America, Australia, Asia, and Korea

models

• Remote control

• Two batteries (AAA, R03, UM-4) for the

remote control

• Audio/video cable

This unit is designed to support the region

management system. Check the regional code

number on the DVD disc package. If the

number does not match the region code of this

unit (see the table below or the back of this

unit), this unit may be unable to play the disc.

About this manual

Supplied accessories

Region codes

Destination

Region

code of

this unit

Playable

discs

U.S.A.,

Canada

Europe

Asia,

Korea

Australia,

Central and

South America

Russia

ALL

Introduction

4 En

Introduction

This unit is designed for use with discs having

the logos shown below. Do not attempt to load

any other type of disc into this unit.

This unit can play:

• DVD-R/RW/R DL and DVD+R/RW/R DL

discs recorded in DVD-Video compatible

format

• DVD-R/RW discs recorded in VR format

(compatible with CPRM)

• MP3, WMA, WMV, and JPEG files

recorded on CD-R/RW, DVD-R/RW,

DVD+R/RW, and USB device

• KODAK picture CDs, FUJICOLOR CDs

• ISO 9660 Level1/Level2 for CD-R/RW

•

Up to 298 folders per disc/USB device and up

to 648 files per folder with up to 8 hierarchies

•DivX

files recorded on CD-R/RW,

DVD-R/RW, DVD+R/RW, and USB device

– Official DivX

Ultra Certified product

– Plays all versions of DivX

video (including

DivX

6) with enhanced playback of DivX

media files and the DivX Media Format

• CD-R/RW, DVD-R/RW

/R DL

, and DVD+R/RW

R DL

cannot be played unless finalized.

• Progressive JPEG, copyright-protected WMA

and WMV files cannot be played with this unit.

• This unit is not compatible with WMV Advanced

profile.

• Only the first session of DVD-R/RW

/R DL and

DVD+R

/R DL

can be played.

• Discs without logos shown left are not guaranteed

to function.

• Some discs cannot be played depending on disc

characteristics or recording conditions even if

they have the logos shown left.

• Do not use any non-standard shaped discs

(heart-shaped, etc.).

• Do not use discs with tape, seals, paste or many

scratches on their surface.

For details about playable formats, see

“Specifications” on page 48.

• When a disc becomes dirty, clean it with a

cleaning cloth. Wipe the disc from the center

out. Do not wipe in a circular motion.

• Do not use solvents such as benzine, thinner,

commercially available cleaners, or

antistatic spray intended for analog records.

Playable disc formats

Notes

Cleaning discs

5 En

Introduction

English

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of

Dolby Laboratories.

Manufactured under license under U.S. Patent No’s : 5,451,942 and other U.S. and worldwide patents issued

and pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are

DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks

of HDMI Licensing LLC.

Patent information

This product incorporates copyright protection technology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized

by Macrovision. Reverse engineering or disassembly is prohibited.

6 En

Functional Overview

1 STANDBY/ON

Turns on this unit or sets it to the standby mode

(see page 13). In the standby mode, this unit

consumes a small amount of power in order to

receive infrared signals from the remote control.

2 Disc tray

Loads a disc in the disc tray (see page 17).

3 OPEN/CLOSE ( )

Opens or closes the disc tray (see page 17).

4 HDMI indicator

Lights up when an HDMI component is

connected and signals output via the HDMI jack

of this unit.

5 PROGRESSIVE indicator

Lights up when this unit is in the progressive

mode (see page 34).

6 Front panel display

Shows the current status of this unit.

7 Remote control sensor

Receives infrared signals from the remote

control (see page 13).

8 PLAY ( p )

Starts playback.

9 PAUSE (   )

Pauses playback.

Frame-by-frame playback (see page 17).

0 STOP ( s )

Stops playback.

q USB port

Connect the USB connector of your USB device

(see page 12).

Front panel

1 2354 6 87 9 0 q

Functional Overview

7 En

Functional Overview

English

1 AC power cable

Plug the power cable into the AC wall outlet.

2 REMOTE CONTROL (IN, OUT) jacks

Connect the REMOTE CONTROL (IN) jack of

this unit to the remote control output jack of

your Yamaha AV receiver (see page 12).

Connect the REMOTE CONTROL (OUT) jack

of this unit to the remote control input jack of

your Yamaha component.

3 HDMI jack

Connect to the HDMI input jack of your HDMI

component (see page 11).

4 AUDIO OUT (L, R) jacks

Connect to the audio input jacks of your AV

receiver or stereo system (see page 9).

5 DIGITAL OUT - COAXIAL jack

Connect to the coaxial input jack of your AV

receiver (see page 9).

6 VIDEO OUT - COMPONENT (Y, PB/CB, PR/

R) jacks

Connect to the component input jacks of your

AV receiver (see page 10).

7 VIDEO OUT - S VIDEO jack

Connect to the S-video input jack of your AV

receiver (see page 10).

8 VIDEO OUT - VIDEO jack

Connect to the composite video input jack of

your AV receiver (see page 10).

9 AV terminal

(Europe and Russia models only)

Connect to the SCART input terminal of your

TV (see page 10).

Caution: Do not touch the inner pins of the jacks on the rear panel of this unit.

Electrostatic discharge may cause permanent damage to this unit.

Rear panel

MAINS

REMOTE CONTROL

OUT

HDMI

AUDIO OUT

COMPONENT VIDEO

S VIDEO

COAXIAL

R / CR

PB / CB

VIDEO OUTDIGITAL OUT

914567832

(Europe model)

8 En

Functional Overview

Turns on this unit or sets it to the standby mode

(see page 13). In the standby mode, this unit

consumes a small amount of power in order to

receive infrared signals from the remote control.

2 TOP MENU/RETURN

Displays the top-level disc menu (DVD).

Moves back to the previous menu (DVD*/VCD)

(see page 20).

3 2 / 3/5/a

Selects an item in the currently displayed menu.

Search or slow playback (see page 27).

ENTER

Confirms the menu selection (see page 27).

4 MENU

Displays the menu of a disc (DVD/JPEG) (see

pages 18, 20, 21 and 22).

Switches PBC on or off (VCD) (see page 20).

5 l22

Moves to the previous chapter or track (see

page 17).

Searches backward (see page 17).*

Stops playback (see page 17).

Opens the disc tray.*

7 Numeric buttons (0-9)

Selects numbered items in the currently

displayed menu.

8 SUBTITLE

Selects the subtitle language (see pages 20 and

22).

9 ZOOM

Enlarges or shrinks the video image (see

pages 18 and 22).

0 ON SCREEN

Accesses or exits from the on-screen display

(OSD) menu of this unit (see page 19).

q SET UP

Accesses or exits from the setup menu of this

unit (see pages 14 and 27).

w 33l

Moves to the next chapter or track (see page 17).

Searches forward (see page 17).*

e 3 / 8

Starts or pauses playback (see page 17).

r USB

Accesses the contents of the connected USB

device or exits from the USB mode (see

page 23).

t AUDIO

Selects the audio language or format (see

pages 20 and 22).

y REPEAT

Accesses or exits from the repeat/shuffle mode

(see page 17).

u REPEAT A-B

Repeats a specified segment (see page 18).

* Press and hold the button for about two seconds.

Remote control

9 En

Connections

English

Be sure to turn off this unit and unplug the

power cable before you make or change

connections.

• Depending on the component you want to

connect, there are various ways to make

connections. Possible connections are

described below.

• Refer to the manuals supplied with your

other components as necessary to make the

best connections.

• Do not connect this unit via your VCR. The

video quality could be distorted by the copy

protection system.

• Do not connect the audio out jack of this unit

to the phono in jack of your audio system.

Digital connection

This unit has a digital coaxial output jack.

Connect the DIGITAL OUT - COAXIAL jack

of this unit to your AV receiver equipped with

a Dolby Digital or DTS decoder using a

commercially available coaxial digital audio

cable.

• You need to set [DIGITAL OUTPUT] to [ALL]

(see “DIGITAL OUTPUT” on page 32).

• If the audio format of the digital output does not

match the capabilities of your receiver, the

receiver produces a distorted sound or no sound

at all. Make sure to select the appropriate audio

format from the menu screen on the disc.

Pressing AUDIO on the remote control once or

more may change not only the audio languages

but also the audio format. The selected format

appears on the TV screen for several seconds.

• If you want to enjoy Dolby Digital and DTS

formats, you must connect this unit to an AV

receiver that supports these formats.

Analog connection

This unit has 2-ch analog output jacks.

Connect the AUDIO OUT (L, R) jacks of this

unit to the corresponding input jacks of your

audio component (such as a stereo amplifier)

using the supplied RCA stereo cable (Europe

and Russia models) or audio/video cable

(other models).

General notes on connections

Audio connections

AUDIO OUT

COMPONENT VIDEO

S VIDEO

COAXIAL

R / CR

PB / CB

VIDEO OUTDIGITAL OUT

This unit (Europe model)

AV receiver

Speakers

Coaxial digital audio cable

Notes

AUDIO OUT

COMPONENT VIDEO

S VIDEO

COAXIAL

PR / CR

PB / CB

VIDEO OUTDIGITAL OUT

Stereo

amplifier

RCA stereo cable (Europe and Russia

models) or audio/video cable

(other models)

(supplied)

Speakers

This unit (Europe model)

Connections

10 En

Connections

Make video connections to your receiver and

TV so that you can use one TV for several

different video sources (LD, VCR, etc.) by

simply switching the input source selector of

your receiver.

This unit has several types of video output

jacks. Use the one that corresponds to the

input jacks of the component to be connected.

Component video jacks <A>

Component video connections achieve higher

fidelity color reproduction than S-video

connections by transmitting video signals on

separate wires for luminance (Y: green) and

chrominance (P

B: blue, PR: red).

Connect the VIDEO OUT - COMPONENT

(Y, P

B/CB, PR/CR) jacks of this unit to

component input jacks of your AV receiver

and then to those of your TV using a

commercially available component video

cable. Observe the color of each jack when

you make connections.

If your receiver does not have component

output jacks, you can achieve a better video

image by connecting the component output

jacks of this unit directly to the component

input jacks of your TV.

S-video jack

S-video connections achieve a clearer picture

than composite video connections by

transmitting video signals on separate wires

for luminance (Y) and chrominance (C).

Connect the VIDEO OUT - S VIDEO jack of

this unit to an S-video input jack of your AV

receiver and then to that of your TV using a

commercially available S-video cable.

Composite video jack <C>

Connect the VIDEO OUT - VIDEO jack of

this unit to a video input jack of your AV

receiver and then to that of your TV using the

supplied composite video cable (Europe and

Russia models) or audio/video cable (other

models).

SCART terminal <D>

(Europe and Russia models only)

You may connect the TV directly to this unit.

Connect the AV terminal of this unit to the

SCART input terminal of your TV using a

commercially available SCART cable.

The AV terminal outputs composite and RGB

video signals together with 2-ch audio signal.

Set the output of the video signal in

“Switching YUV/RGB (Europe and Russia

models only)” on page 36.

Video connections

AUDIO OUT

COMPONENT VIDEO

S VIDEO

COAXIAL

R / CR

PB / CB

VIDEO OUTDIGITAL OUT

VIDEO

OUT

VIDEO

S VIDEO

OUT

COMPONENT

VIDEO OUT

COMPONENT

VIDEO IN

S VIDEO

COMPONENT

VIDEO IN

S VIDEO

INPUT

VIDEO

INPUT

<D><C>

<A>

YPB/CBPR/CR

Composite video

cable (Europe and

Russia models)

or audio/video

cable

(other models)

(supplied)

AV receiver

This unit (Europe model)

Component

video cable

S-video

cable

SCART cable

11 En

Connections

English

HDMI jack

HDMI (High-Definition Multimedia

Interface) provides high quality digital audio

and video on a single connection.

Connect the HDMI jack of this unit to an

HDMI input jack of your AV receiver, and

then to that of your TV using a commercially

available HDMI cable.

If your receiver does not have an HDMI input

jack, you can achieve a better video image by

connecting the HDMI jack of this unit directly

to the HDMI input jack of your TV.

This unit can display High-Definition JPEG

images (720p, 1080i, or 1080p) when you

connect this unit to an HDTV via the HDMI

jack. For details, see “HD JPEG” on page 37.

• You need to set [HDMI AUDIO] (see page 32)

and [HDMI VIDEO] (see page 36) properly.

• You need to make appropriate audio connections

if the connected component does not output audio

signals (see “Audio connections” on page 9).

• This unit is not compatible with HDCP-

incompatible HDMI or DVI components.

• You need a commercially available HDMI/DVI

conversion cable when you connect this unit to

other DVI components. In this case, the HDMI

jack of this unit does not output any audio

signals.

• Depending on the connected DVI component,

black and white in the image may not be distinct.

In that case, adjust the picture setting of the

connected DVI component.

• Do not disconnect or turn off the power of the

HDMI/DVI component connected to the HDMI

jack of this unit during playback. Doing so may

disrupt playback or cause noise.

When connecting an HDMI component, refer to the

manual supplied with your component.

HDMI connection

AUDIO OUT

COMPONENT VIDEO

S VIDEOCOAXIAL

R / CR

PB / CB

VIDEO OUT

DIGITAL OUT

HDMI

HDMI IN

HDMI OUT

HDMI IN

HDMI cable

AV receiver

This unit (Europe model)

Notes

12 En

Connections

USB port

This unit has a USB port and can access MP3,

WMA, WMV, JPEG, and DivX

files saved

on your USB device.

Connect a USB connector of your USB device

to the USB port on the front panel of this unit.

When your USB device is connected to the

USB port of this unit, you can record tracks on

a CD onto your USB device in MP3 format.

For details, see “Recording CD tracks onto

your USB device” on page 28.

To disconnect the USB device, press

stop playback, press USB to return to the disc

mode, and then disconnect the device from

this unit.

This unit may not recognize some USB devices.

For details about the USB features, see “Using a

USB device” on page 23.

Remote control jacks

This unit has remote control input/output

jacks. If your AV receiver is a Yamaha product

and has the capability to transmit SCENE

control signals, you can use the SCENE

function.

Connect the REMOTE CONTROL (IN) jack

of this unit to a remote control output jack of

your receiver using a commercially available

monaural 3.5 mm mini plug cable so that this

unit starts playback automatically by simply

pressing a SCENE button of your receiver.

• For details about the SCENE function, refer to

the owner’s manual supplied with your Yamaha

AV receiver.

• You can connect a Yamaha component (such as

DVD player and CD player) corresponds with the

SCENE function to the REMOTE CONTROL

(OUT) jack of this unit.

Other connections

Note

USB

device

This unit

MAINS

REMOTE CONTROL

OUT

HDMI

REMOTE OUT

AV receiver

This unit

Monaural 3.5 mm mini plug

cable

13 En

Getting Started

English

1 Open the battery compartment.

2 Insert the two supplied batteries (AAA,

R03, UM-4) following the indications (+/–)

inside the compartment.

3 Close the cover.

• Insert batteries correctly according to the polarity

markings (+/–). Batteries inserted in the opposite

orientation may leak.

• Replace the exhausted batteries immediately with

new ones to prevent leakage.

• Remove the batteries from the compartment if the

remote control is not used for more than a month.

• If the batteries have leaked, dispose of them

immediately. Avoid touching the leaked material

or letting it come into contact with clothing, etc.

Clean the battery compartment thoroughly before

installing new batteries.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as

alkaline and manganese batteries) together. Read

the packaging carefully as these different types of

batteries may have the same shape and color.

• Dispose of the batteries correctly in accordance

with your local regulations.

Using the remote control

Use the remote control within 6 m

(approximately 20 ft) of this unit and point it

toward the remote control sensor.

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– places of high humidity, such as near a bath

– places of high temperature, such as near a

heater or stove

– places of extremely low temperature

– dusty places

• When the remote control works unstably, point it

at an angle upward to the sensor.

1 Plug the power cable into the AC outlet.

2 Turn on your TV and AV receiver.

3 Select the appropriate input source of the

AV receiver (refer to the manual supplied

with your AV receiver).

4 Press STANDBY/ON on the front panel or

on the remote control to turn on this

unit.

➜ The front panel display lights up.

5 Set the TV to the correct video input (refer

to the manual supplied with your TV).

➜ The default screen appears on the TV.

Step 1: Inserting batteries into

the remote control

Notes

Step 2: Turning on the power

Within 6 m

(approximately 20 ft)

Getting Started

14 En

Getting Started

You can customize this unit using the setup

menu displayed on the TV screen.

Unless stated otherwise, all operations described

here are carried out using the supplied remote

control.

• To return to the previous menu, press 2.

• If the setting you have selected are not

appropriate, you can reset all settings to the initial

factory settings (see “Resetting the system” on

page 40).

Setting a color system for your TV

This unit is compatible with both NTSC and

PAL video formats. Select the color system

that matches your TV.

1 Press SET UP.

2 Press 3 repeatedly to select “VIDEO

SETUP PAGE”.

3 Press 5/a to highlight [TV TYPE], and

then press 3.

4 Press 5/a to highlight one of the

following options.

PAL

Select this if the connected TV is a PAL

system TV. It will change the video signals of

NTSC discs and output them in PAL format.

NTSC

Select this if the connected TV is an NTSC

system TV. It will change the video signals of

PAL discs and output them in NTSC format.

MULTI

Select this if the connected TV is compatible

with both NTSC and PAL formats (such as a

multi-system TV).

The output format will be in accordance with

the video signals of the disc.

5 Select an item, and then press ENTER.

6 Press SET UP to exit from the menu.

• Before changing the current TV standard setting,

ensure that your TV supports the selected TV

type.

• When making HDMI connections, you cannot

change or select [TV TYPE].

If the picture is not displayed properly on your TV,

wait for 15 seconds for this unit to activate

automatic recovery.

Step 3: Setting a TV type/display

and language

Note

VIDEO SETUP PAGE

TV TYPE PAL

TV DISPLAY NTSC

PROGRESSIVE MULTI

PICTURE SETTING

BLACK LEVEL

CLOSED CAPTION

COMPONENT

HDMI SETUP

: [COMPONENT] is only for Europe and

Russia models.

Notes

.......

15 En

Getting Started

English

Setting an aspect ratio for your TV

You can set the aspect ratio of this unit to

match your TV. If the aspect ratio of your TV

is 16:9, you do not need to change this setting.

For details, see “Setting the TV display” on

page 33.

1 Press SET UP.

2 Press 3 repeatedly to select “VIDEO

SETUP PAGE”.

3 Press 5/a to highlight [TV DISPLAY],

and then press 3.

4 Press 5/a to highlight the desired setting,

and then press ENTER.

5 Press SET UP to exit from the menu.

Setting the OSD Language

You can select your own preferred language

for the setup menu. This setting remains once

selected.

1 Press SET UP.

2 Press 2 / 3 to select “GENERAL SETUP

PAGE”.

3 Press 5/a to highlight [OSD

LANGUAGE], and then press 3.

4 Press 5/a to select a language, and then

press ENTER.

5 Press SET UP to exit from the menu.

VIDEO SETUP PAGE

TV TYPE

TV DISPLAY 4:3 PAN SCAN

PROGRESSIVE 4:3 LETTER BOX

PICTURE SETTING 16:9

BLACK LEVEL

CLOSED CAPTION

COMPONENT

HDMI SETUP

: [COMPONENT] is only for Europe and

Russia models.

GENERAL SETUP PAGE

DISC LOCK ENGLISH

MP3 RECORD DANSK

PROGRAM DEUTSCH

DISPLAY DIM ESPAÑOL

OSD LANGUAGE FRANÇAIS

SCREEN SAVER ITALIANO

SLEEP NEDERLANDS

DIVX(R) VOD CODE NORSK

: The menu items may change depending on

the models.

.......

16 En

Getting Started

Setting the audio, subtitle, and disc

menu languages (DVD-Video only)

You can select your own preferred language

for the audio, subtitle, and disc menu. This

unit automatically switches to the selected

language whenever you load a disc. If the

selected language is not available on the disc,

the default language of the disc will be used

instead.

1 Press

twice to stop playback (if

necessary), and then press SET UP.

2 Press 3 repeatedly to select

“PREFERENCE PAGE”.

3 Press 5/a to highlight one of the options

below, and then press 3.

• AUDIO (audio language)

• SUBTITLE (subtitle language)

• DISC MENU (disc menu language)

4 Press 5/a to select a language, and then

press ENTER.

5 Repeat steps 3-4 for other language

settings.

6 Press SET UP to exit from the menu.

■ To select a language not in the list

1 Select [OTHERS] in [AUDIO],

[SUBTITLE], or [DISC MENU], and then

press ENTER.

2 Use the numeric buttons (0-9) to enter

the 4-digit language code (see “Language

Codes” on page 41), and then press

ENTER.

3 Press SET UP to exit from the menu.

PREFERENCE PAGE

AUDIO ENGLISH

SUBTITLE CHINESE (SIMP)

DISC MENU FRENCH

PARENTAL SPANISH

VR LIST RUSSIAN

DATA DISC NAV POLISH

DIVX SUBTITLE ITALIAN

PBC TURKISH

: The menu items may change depending on

the models.

17 En

Playback Operation

English

• If the prohibited icon ( ) appears on the TV

screen when a button is pressed, the function for

that button is not available on the current disc or

at the current time.

• Depending on the disc, some operations may

operate differently or be restricted. Refer to the

instruction supplied with the disc.

• Do not push on the disc tray or put any objects

other than discs on the disc tray. Doing so may

cause this unit to malfunction.

1 Make sure this unit is turned on.

2 Press OPEN/CLOSE ( ) on the front

panel to open the disc tray.

3 Place the disc in the disc tray with the

printed side up.

4 Press OPEN/CLOSE ( ) again to close

the disc tray.

➜ After recognizing the disc, this unit

starts playback automatically.

• If you press 3

/ 8 when the disc tray is

open, the disc tray closes and playback

starts automatically.

5 To pause playback, press 3 / 8 during

playback.

➜ Playback is paused and the sound is

muted.

• Frame-by-frame playback can be done

by pressing PAUSE (   ) on the front

panel repeatedly.

6 To resume normal playback, press 3 / 8

again.

7 To stop playback, press

Selecting a track/chapter

Press l22 / 33l or use the numeric

buttons (0-9) to select a track/chapter

number.

2 During repeated playback, press l22 /

l to replay the same track/chapter.

Searching backward/forward

Press and hold l22 / 33l or press 2 / 3.

2 While searching, press l22 / 33l or

2 / 3 repeatedly to select the desired

speed.

3 To resume normal playback, press 3 / 8.

The 2 / 3 key may not be available with some

discs.

For MP3, WMA, WMV, and DivX

, the search

function allows you to search the track currently

being played.

Repeat/Shuffle playback

Each time you press REPEAT during

playback, the front panel display changes

as follows:

DVD-Video

➜ RPT ONE (repeat chapter)

➜ RPT TT (repeat title)

➜ RPT ALL (repeat all)

➜ SHUFFLE (shuffle)

➜ RPT SHF (shuffle repeat)

➜ RPT OFF (repeat off)

DVD VR format

➜ RPT ONE (repeat chapter)

➜ RPT TT (repeat title)

➜ RPT ALL (repeat all)

➜ RPT OFF (repeat off)

Notes

Basic operation

Note

Repeat/Shuffle functions

Playback Operation

18 En

Playback Operation

VCD/SVCD/CD

➜ RPT ONE (repeat track)

➜ RPT ALL (repeat all)

➜ SHUFFLE (shuffle)

➜ RPT SHF (shuffle repeat)

➜ RPT OFF (repeat off)

MP3/WMA/WMV/DivX

➜ RPT ONE (repeat file)

➜ RPT FLD (repeat folder)

➜ SHUFFLE (shuffle)

➜ RPT OFF (repeat off)

For VCD/SVCD, repeat playback is not available

when the PBC mode (see “Special VCD/SVCD

features” on page 20) is on.

Repeating a section within a

chapter/track

While playing a disc, press REPEAT A-B

at the desired starting point.

➜ “SET A” appears in the front panel

display.

2 Press REPEAT A-B again at the desired

end point.

• A and B can only be set within the same

chapter/track.

➜ “RPT AB” appears in the front panel

display and the selected section repeats

continuously.

3 To exit from the sequence, press REPEAT

A-B.

Using the disc menu

Depending on the disc, a menu may appear on

the TV screen once you load the disc.

■ To select a playback feature or item

Use 2 / 3/5/a or the numeric

buttons (0-9), and then press ENTER to

start playback.

■ To access or exit from the menu

Press MENU.

Playback in slow motion

You can play back video in slow motion.

1 During playback, press 5 for reverse slow

motion or a for forward slow motion.

2 During slow motion, press 5/a repeatedly

to select the desired speed.

3 To resume normal playback, press 3 / 8.

For VCD and SVCD, reverse slow motion is not

available.

Zooming pictures in/out

You can enlarge or shrink the picture on the

TV screen and pan through the enlarged

picture.

1 During playback, press ZOOM repeatedly

to display the picture at different scales.

•Use 2 / 3/5/a to pan through the

enlarged picture.

➜ Playback continues.

2 Press ZOOM repeatedly to return to the

original size.

Resuming playback from the last

stopped point

You can resume playback of the last ten discs,

even if the discs were ejected or this unit was

set to the standby mode.

Note

Operations for video playback

(DVD/VCD/SVCD)

Note

19 En

Playback Operation

English

1 Load one of the last ten discs.

➜ “LOADING” appears on the TV

screen.

2 Press 3 / 8 while “LOADING” is

displayed on the TV screen.

➜ “RESUME PLAY” appears on the TV

screen and the disc is played back from

the last point.

■ To cancel the resume mode

When playback is stopped, press

again.

For DVD VR format, resume playback is not

available.

Using the on-screen display (OSD)

The OSD menu shows disc playback

information (e.g., the title or chapter number,

elapsed playing time or audio/subtitle

language). A number of operations are

possible without interrupting disc playback.

1 During playback, press ON SCREEN.

➜ A list of available disc information

appears on the TV screen.

DVD

VCD/SVCD

2 Press 5/a to scroll the information, and

then press ENTER to access the selected

item.

3 Use the numeric buttons (0-9) to input

the number/time or press 5/a to make a

selection, and then press ENTER.

➜ Playback changes to the selected time/

title/chapter/track.

■ Changing the Title/Chapter/Track

(DVD/VCD)

1 Press 5/a to select [TITLE],

[CHAPTER] (DVD), or [TRACK] (VCD).

2 Press ENTER.

3 Select a title, chapter, or track number

using the numeric buttons (0-9).

■ Time search (DVD/VCD)

1 Press 5/a to select [TT TIME] /

[CH TIME] (DVD) or [DISC TIME] /

[TRACK TIME] (VCD).

• [TT TIME] refers to the total time of

the current title, and [CH TIME] refers

to the total time of the current chapter.

2 Press ENTER.

3 Enter hours, minutes and seconds from left

to right using the numeric buttons (0-9)

(e.g. 0:34:27).

■ Changing the Audio/Subtitle/Angle

(DVD)

You can change [AUDIO], [SUBTITLE], or

[ANGLE] if these functions are available on

the disc you are playing.

1 Press 5/a to select [AUDIO],

[SUBTITLE], or [ANGLE].

2 Press ENTER.

Note

TITLE 02/14

CHAPTER 02/14

AUDIO 5.1CH

SUBTITLE ENG

BITRATE 16 TITLE ELAPSED 0:02:25

TRACK 02/14

DISC TIME 0:49:17

TRACK TIME 0:03:43

REPEAT OFF

BITRATE 16 TOTAL ELAPSED 0:02:25

20 En

Playback Operation

3 For Audio and Subtitle:

Press 5/a to highlight your selection, and

then press ENTER.

For Angle:

Select an angle using the numeric

buttons (0-9).

■ Repeat/Time Display (DVD/VCD)

1 Press 5/a to select [REPEAT] or [TIME

DISP.].

2 Press ENTER.

3 Press 5/a to highlight your selection, and

then press ENTER.

■ Time display (CD)

Each time you press ON SCREEN, the

time display changes as follows:

Depending on the disc, the OSD menu may not be

displayed even if you press ON SCREEN.

Playing by title

Press MENU.

➜ The disc title menu appears on the TV

screen.

2 Use 2 / 3/5/a or the numeric

buttons (0-9) to select a playback option.

3 Press ENTER.

Selecting an audio language/

format and subtitle language

■ To select an audio language/format

Press AUDIO repeatedly to select an audio

language and/or format.

■ To select a subtitle language

Press SUBTITLE repeatedly to select a

subtitle language.

Using the playback control (PBC)

For a VCD with a playback control (PBC)

feature (version 2.0 only)

1 Press MENU to toggle between “PBC ON”

and “PBC OFF”.

➜ If you select “PBC ON”, the disc menu

appears (if available) on the TV screen.

2 Use the numeric buttons (0-9) to select

a playback option.

• Press

l22 / 33l to move to the

previous/next page (if available).

3 During playback, press TOP MENU/

RETURN to return to the menu screen.

■ To skip the index menu and play

back a disc from the beginning

Press MENU to turn off the PBC function.

Note

Special DVD features

TOTAL ELAPSED TOTAL REMAIN

SINGLE REMAIN SINGLE ELAPSED

Special VCD/SVCD features

21 En

Playback Operation

English

1 Load a data disc.

• The disc reading time may exceed 30

seconds due to the complexity of the

directory/file configuration.

➜ The data disc menu appears on the TV

screen.

2 Playback starts automatically. If not, press

3 / 8.

3 Press l22 / 33l to select another track/file

in the current folder.

• For JPEG, some files may not be displayed

correctly depending on the aspect ratio of the

image.

• It may not be possible to play certain MP3/

WMA/WMV/JPEG/DivX

discs due to the

configuration and characteristics of the discs or

the recording conditions.

• HD JPEG images may not be displayed correctly

when the first image is displayed or the disc is

ejected. For details about HD JPEG, see “HD

JPEG” on page 37.

• Depending on the picture size, HD JPEG images

may appear smaller in size.

Selecting a folder and track/file

Press 5/a to select a folder, and then

press ENTER to open the folder.

2 Press 5/a to select a track/file.

3 Press ENTER.

➜ Playback starts from the selected file to

the end of the folder.

1 Load a picture disc (JPEG, KODAK

Picture CD, or FUJICOLOR CD).

➜ For JPEG, the picture menu appears on

the TV screen.

➜ For KODAK Picture CD and

FUJICOLOR CD, the slideshow

begins.

■ For JPEG

2 Press 3 / 8 to start the slideshow.

Using the preview function

This function displays the content of the

current folder or the entire disc.

1 Press

during playback.

➜ 12 thumbnails appear on the TV screen.

2 Press l22 / 33l to display the other

thumbnails on the previous/next page.

Playing data discs

(MP3/WMA/WMV/JPEG/DivX

)

Notes

00:00 00:00

001/020

Piano

Cello

Jazz

Live

Favorite

MP3

Special picture disc features

22 En

Playback Operation

3 Use 2 / 3/5/a to highlight one of the

thumbnails, and then press ENTER to start

playback.

Move the cursor to highlight on the

bottom of the page and then press ENTER

to start playback from the first thumbnail

on the current page.

■ For JPEG

4 Press MENU to return to the data disc

menu.

Zooming pictures in/out

1 During playback, press ZOOM repeatedly

to display the picture at different scales.

2 Use 2 / 3/5/a to pan through the

enlarged picture.

Playback with multi-angles

During playback, press 2 / 3/5/a to

rotate the picture on the TV screen.

rotates the picture counter-clockwise

3: rotates the picture clockwise

5: flips the picture vertically

a: flips the picture horizontally

Playing MP3 music and JPEG

pictures simultaneously

1 Load a disc that contains both MP3 music

and JPEG picture data.

➜ The disc menu appears on the TV

screen.

2 Select an MP3 music track.

3 During MP3 music playback, select a

JPEG picture file from the TV screen, and

then press ENTER.

➜ The picture files are played back one

after another until the end of the folder.

4 To quit simultaneous playback, press

MENU, and then press

• Some files cannot be played correctly depending

on disc characteristics or recording conditions.

• This function is not available when [HD JPEG] is

set to [ON] (see page 37).

For DivX

files including DMF (DivX

Media Format) features only

Using the interactive menu

1 Load a disc and then select a file.

➜ The interactive menu appears on the

TV screen.

2 Use 2 / 3/5/a to select a chapter.

3 Press ENTER or 3 / 8 to start playback of

the selected chapter.

■ To access the interactive menu

During playback, press MENU.

■ To return to the data disc menu

screen

When the interactive menu is displayed,

press

Selecting an audio/subtitle language

■ To select an audio language

During playback, press AUDIO to switch

the audio language recorded on the

contents.

Notes

Special DivX

features

23 En

Playback Operation

English

■ To select a subtitle language

During playback, press SUBTITLE to

switch or turn on/off the subtitle language

recorded on the contents.

• For information about external subtitle files, see

“Selecting DivX

external subtitle group (except

Korea model)” on page 38.

• For external subtitle files, the following subtitle

format filename extensions are supported (note

that these files are not shown within the disc

menu): .srt, .sub, .ssa, .smi

• The filename of the movie file has to be repeated

at the beginning of the filename for the external

subtitle file.

• For Korean model, Korean and English external

subtitle files are available.

• Some external subtitle files may be displayed

incorrectly or not at all.

• Some discs cannot be played depending on disc

characteristics or recording conditions.

• The number of external subtitle files that can be

switched for the same movie file is limited to a

maximum of ten.

You can play back MP3, WMA, WMV, JPEG,

and DivX

files saved on your supported USB

device.

Supported USB devices

This unit supports USB mass storage class

devices using FAT16 or FAT32 format. The

supported devices are flash memories, card

readers, and portable audio players.

• Some devices may not work properly.

• If “Device not supported” appears on the TV

screen when you connect the USB device, follow

the procedure below.

– Set this unit to the standby mode, and then turn

it on again.

– Disconnect the device when this unit is in the

standby mode, then connect it again and turn

on this unit.

– Connect the AC adapter if the adapter is

supplied with the device.

If “Device not supported” appears even after you

perform this procedure, the device is not usable

with this unit.

• If “USB current protection active. Device not

supported” appears on the TV screen, the device

is not usable with this unit because the power

consumption of the device is too high.

• This unit cannot read more than two card reader

slots at once, though it can recognize up to six

slots. The first slot has priority.

• Do not connect devices other than USB mass

storage class devices: USB chargers, USB hubs,

PCs, etc.

• This unit is not compatible with HDDs.

Playing data files

Connect your USB device to the USB port

of this unit (see “USB port” on page 12).

➜ “Press USB key to switch device”

appears on the TV screen.

2 Press USB.

• The reading time may exceed 30 seconds

due to the number of files/folders.

➜

The file menu appears on the TV screen.

Follow the procedure in “Playing data discs

(MP3/WMA/WMV/JPEG/DivX

)” on

page 21.

Notes

Using a USB device

Notes

24 En

Playback Operation

■ To exit from the USB mode

Press

to stop playback, and then press

USB.

➜

This unit is set to the disc mode.

■ To disconnect the USB device

After exiting from the USB mode,

disconnect the USB device from this unit.

• Yamaha and suppliers accepts no liability for the

loss of data saved on the USB devices connected

to this unit. As a precaution, it is recommended

that the files are made backup copies.

• You cannot access the USB mode while

“LOADING” is displayed on the TV screen.

• If you disconnect the USB device or open the disc

tray of this unit, the playback mode is

automatically switched to the disc mode.

• This unit can display up to 648 files. However,

less than 648 files may be displayed if some files

are not playable with this unit.

• If the USB device is partitioned, only the first

partition is displayed.

• This unit can play back files of 4 GB in size or

less.

Notes

25 En

Setup Menu

English

The bold items/parameters listed below are the default settings. The menu items, setting items,

and default settings may change depending on the models.

Menu overview

Setup page Menu item Setting Item/Submenu Setting item/Parameter Page

GENERAL

SETUP PAGE

DISC LOCK LOCK, UNLOCK

MP3 RECORD (SETUP is displayed)

PROGRAM (INPUT MENU is displayed)

DISPLAY DIM 100%, 70%, 40%

OSD LANGUAGE

(See “OSD LANGUAGE setting items” on

page 26)

SCREEN SAVER ON, OFF

SLEEP 30, 60, 90, 120, 150 MINS, OFF

DIVX(R) VOD CODE (DivX

registration code is displayed)

AUDIO SETUP

PAGE

ANALOG OUTPUT STEREO, LT/RT

DIGITAL AUDIO DIGITAL OUTPUT OFF, ALL, PCM ONLY

LPCM OUTPUT 48KHz, 96KHz

HDMI AUDIO ON, OFF

NIGHT MODE ON, OFF

VIDEO SETUP

PAGE

TV TYPE PAL

(Europe, Russia, Australia, and Asia

models)

, NTSC

(U.S.A., Canada, Central

and South America, and Korea models)

MULTI

TV DISPLAY 4:3 PAN SCAN, 4:3 LETTER BOX, 16:9

PROGRESSIVE OFF, ON

PICTURE SETTING STANDARD, BRIGHT, SOFT

PERSONAL (BRIGHTNESS) –20 to +20 (0)

PERSONAL (CONTRAST) –16 to +16 (0)

PERSONAL (TINT) –9 to +9 (0)

PERSONAL (COLOR) –9 to +9 (0)

BLACK LEVEL ON, OFF

CLOSED CAPTION ON

(U.S.A. and Canada models)

, OFF

(Other models)

COMPONENT

(Europe

and Russia

models only)

YUV, RGB

HDMI SETUP WIDE SCREEN FORMAT SUPERWIDE, 4:3 PILLAR BOX,

OFF

HDMI VIDEO 480P, 576P, 720P, 1080I, 1080P,

AUTO

HD JPEG ON, OFF

Setup Menu

26 En

Setup Menu

■ OSD LANGUAGE setting items

Setup page Menu item Setting Item/Submenu Setting item/Parameter Page

PREFERENCE

PAGE

AUDIO ENGLISH

(Europe, U.S.A., Canada,

Central and South America, Australia,

and Asia models)

, RUSSIAN

(Russia

model)

, KOREAN

(Korea model), etc.

SUBTITLE OFF

(Europe, U.S.A., Canada, Central

and South America, Australia, and Asia

models)

, RUSSIAN

(Russia model)

KOREAN

(Korea model), etc.

DISC MENU ENGLISH

(Europe, U.S.A., Canada,

Central and South America, Australia,

and Asia models)

, RUSSIAN

(Russia

model)

, KOREAN

(Korea model), etc.

PARENTAL 1 KID SAFE, 2 G, 3 PG, 4 PG 13,

5 PGR, 6 R, 7 NC17, 8 ADULT

VR LIST ORIGINAL LIST, PLAY LIST

DATA DISC NAV WITHOUT MENU, WITH MENU

DIVX SUBTITLE

(except Korea model)

GROUP1, GROUP2, GROUP3,

GROUP4, GROUP5

PBC ON, OFF

AUTO STANDBY ON, OFF

PASSWORD CHANGE

DEFAULT RESET

Model Setting item

Europe ENGLISH, DANSK, DEUTSCH,

ESPAÑOL, FRANÇAIS, ITALIANO,

NEDERLANDS, NORSK, POLSKI,

PORTUGUÊS,

PYCCKИЙ

SVENSKA, TÜRKÇE

Russia ENGLISH, DANSK, DEUTSCH,

ESPAÑOL, FRANÇAIS, ITALIANO,

NEDERLANDS, NORSK, POLSKI,

PORTUGUÊS, PYCCKИЙ,

SVENSKA, TÜRKÇE

U.S.A., Canada ENGLISH, FRANÇAIS, ESPAÑOL

Australia ENGLISH, FRANÇAIS, ESPAÑOL

Central and

South America

ENGLISH, ESPAÑOL, PORTUGUÊS

Asia ENGLISH,

Korea

ENGLISH

27 En

Setup Menu

English

Setup is carried out on the TV, enabling you to

customize this unit to suit your own particular

requirements.

Follow the procedures below to

start the setup menu operations.

• To return to the previous menu, press 2.

• The OSDs shown in this section are the examples

of Europe model. The menu items, setting items,

and default setting may change depending on the

models.

• If the settings you have selected are not

appropriate, you can reset all settings to the initial

factory settings (see “Resetting the system” on

page 40).

• Refer to the following pages for details of the

menu that requires a particular operation.

1 Press SET UP.

➜ The setup page and menu items appear

on your TV.

2 Press 2 / 3 to select the desired setup

page.

3 Press 5/a to highlight the desired menu

item.

➜ Menu items and setting items appear.

➜

If setting items do not appear, the selected

menu item has submenus. In this case,

press

ENTER

, and then repeat step 3.

4 Press 3.

5 Press 5/a to select the desired setting

item, and then press ENTER.

➜

If the parameter appears, press

adjust the setting, and then press

ENTER

6 Press SET UP to exit from the menu.

Setup menu operation

GENERAL SETUP PAGE

DISC LOCK

MP3 RECORD

PROGRAM

DISPLAY DIM

OSD LANGUAGE

SCREEN SAVER

SLEEP

DIVX(R) VOD CODE

VIDEO SETUP PAGE

TV TYPE

TV DISPLAY

PROGRESSIVE

PICTURE SETTING STANDARD

BLACK LEVEL BRIGHT

CLOSED CAPTION SOFT

COMPONENT PERSONAL

HDMI SETUP

: [COMPONENT] is only for Europe and

Russia models.

.......

PERSONAL PICTURE SETUP

BRIGHTNESS

CONTRAST

TINT

COLOR

28 En

Setup Menu

Locking/Unlocking the disc for

viewing

Not all discs are rated or coded by the

manufacturer of the disc. You can prevent

playback of a specific disc by locking the disc.

You can lock up to 40 discs on this unit.

• Select [DISC LOCK] in “GENERAL

SETUP PAGE”.

LOCK

Select this to lock playback of the current disc.

Subsequent access to a locked disc requires a

six-digit password.

The default password is “000 000” (see

“Changing the password” on page 40).

UNLOCK

Select this to unlock the disc and allow future

playback.

Recording CD tracks onto your

USB device

You can record CD tracks onto your USB

device connected to this unit.

The tracks are recorded in MP3 format.

• MP3 files created by this unit are restricted to

your private enjoyment only. Unauthorized use of

copyrighted recordings can be copyright

infringement.

• Yamaha and suppliers accepts no liability for the

loss of data saved on the USB devices connected

to this unit. As a precaution, it is recommended

that the files are made backup copies.

• Discs incompatible with CDDA standard are not

guaranteed to function.

• Copy protected music discs incompatible with

CDDA standard are not recordable.

• Tracks protected by SCMS (Serial Copy

Management System) are not recordable.

• If “USB current protection active. Device not

supported” appears on the TV screen, the device

is not usable with this unit because the power

consumption of the device is too high.

• “Device not supported” or “USB current

protection active. Device not supported” appears

on the TV screen when you connect the USB

device, this unit does not support the USB device.

In this case, use a different USB device.

• During recording, do not disconnect your USB

device or set this unit to the standby mode.

About the USB devices supported by this unit, refer

to “Supported USB devices” on page 23.

1 Connect your USB device to the USB port

of this unit (see “USB port” on page 12).

2 Load a music CD (see “Basic operation”

on page 17).

3 In “GENERAL SETUP PAGE”, press

5/a to highlight [MP3 RECORD], and

then press 3 to select [SETUP].

4 Press ENTER.

General setup menu

GENERAL SETUP PAGE

DISC LOCK

MP3 RECORD

PROGRAM

DISPLAY DIM

OSD LANGUAGE

SCREEN SAVER

SLEEP

DIVX(R) VOD CODE

Notes

29 En

Setup Menu

English

5 In “MP3 RECORD”, press 5/a to

highlight [SPEED], and then press ENTER

repeatedly to select the desired setting.

Normal

Select this to record at normal speed.

Fast

Select this to record at about 2x speed.

When you select [Normal], you can enjoy playback

while the recording.

6 Press 5/a to highlight [Bitrate], and then

press ENTER repeatedly to select the

desired bit rate.

96 kbps, 128 kbps, 192 kbps, 256 kbps,

320 kbps

Select a bit rate for the music data.

Generally, the higher the bit rate, the better the

sound quality. However, higher bit rates use more

space on a device.

7 Press 3.

8 Press 5/a to highlight the desired track in

“TRACK”, and then press ENTER. Repeat

this step as necessary to select the other

tracks.

➜ The number of selected tracks and total

time are shown in “SUMMARY”.

• The tracks may be displayed on more

than one page in “TRACK”. In this

case, press 5/a to select or ,

and then press ENTER to scroll

through pages.

• You can also select or deselect all the

tracks by selecting [Select All] or

[Deselect All].

9 Press 2 to return to [SPEED].

10Press 5/a to highlight [Start], and then

press ENTER.

• To cancel the recording, highlight

[CANCEL], and then press ENTER.

• Recording cannot be started in the following

conditions:

– the connected USB device is not supported

– no USB device is connected

– when “USB current protection active. Device

not supported” is shown on the TV screen

• During recording, do not press any keys other

than ENTER.

11When the recording is completed, press

2 / 3/5/a to highlight [Exit] and then

press ENTER to exit from “MP3

RECORD” menu.

The created file is named as “TRACKxxx”. In

“xxx”, numbers from 001 to 999 are inserted in

order.

TRACK

Track 01 03:34

Track 02 06:42

Track 03 03:42

Track 04 03:09

Track 05 02:50

Track 06 00:34

Track 07 05:15

Select All

Deselect All

OPTION

SPEED Normal

Bitrate 128 kbps

MP3 RECORD

SUMMARY

Selected 0

Total Time 00:00

Start Exit

Notes

30 En

Setup Menu

You cannot edit the files on your USB device

connected to this unit by using this unit (for

example, deleting or renaming the files).

Programming disc tracks

(except MP3/WMA/WMV/JPEG/

DivX

)

You can play back the contents of a disc in the

desired order by programming the tracks to be

played. You can store up to 20 tracks per disc

with a maximum of ten discs.

1 In “GENERAL SETUP PAGE”, press

5/a to highlight [PROGRAM], and then

press 3 to select [INPUT MENU].

2 Press ENTER.

➜ The input menu appears on the TV

screen.

■ To input your favorite tracks/

chapters

3 Use the numeric buttons (0-9) to enter a

valid track/chapter number.

4 Use 2 / 3/5/a to move the cursor to the

next position.

• If the track/chapter number is more

than ten, press 33l to move to the next

page, and then proceed with

programming.

•Use 2 / 3/5/a to highlight [NEXT]

on the program menu, and then press

ENTER.

5 Repeat steps 3-4 to input another track/

chapter number.

■ To remove a track

6 Use 2 / 3/5/a to select the track you

want to remove.

7 Press ENTER to remove this track from

the program menu.

■ To start program playback

8 Use 2 / 3/5/a to highlight [START] on

the program menu, and then press ENTER.

➜ Playback starts for the selected tracks in

the programmed sequence.

■ To exit from program playback

9 Use 2 / 3/5/a to highlight [EXIT] on

the program menu, and then press ENTER.

Dimming the front panel display

You can select different levels of brightness

for the front panel display.

• Select [DISPLAY DIM] in

“GENERAL SETUP PAGE”.

100%

Select this for full brightness.

70%

Select this for medium brightness.

40%

Select this for dimming display.

OSD language

This menu contains various options for the on-

screen display (OSD) language. For details,

see “Setting the OSD Language” on page 15.

Note

1 04

2 10

3 _ _

4 _ _

5 _ _

6 _ _

7 _ _

8 _ _

9 _ _

10 _ _

PROGRAM: TRACK (01-17)

EXIT START NEXT

31 En

Setup Menu

English

Setting the screen saver

This function is used to turn on or off the

screen saver.

• Select [SCREEN SAVER] in “GENERAL

SETUP PAGE”.

Select this to turn off the TV screen when disc

playback is stopped or paused for more than

15 minutes.

OFF

Select this to disable the screen saver function.

Setting the sleep timer

This feature automatically sets this unit to the

standby mode after a certain elapsed period.

• Select [SLEEP] in “GENERAL SETUP

PAGE”.

30 MINS, 60 MINS, 90 MINS, 120 MINS,

150 MINS

Select one of them to set the sleep timer

function.

OFF

Select this to cancel the sleep timer function.

The sleep timer setting can also be deactivated if this

unit is set to the standby mode.

Displaying the DivX

VOD

registration code

Yamaha provides you with a DivX

VOD

(Video On Demand) registration code that

allows you to rent and purchase videos using

the DivX

VOD service.

For more information, visit

https://vod.divx.com/.

1 In “GENERAL SETUP PAGE”, press

5/a to highlight [DIVX(R) VOD CODE],

and then press 3.

➜ The registration code appears.

2 Press ENTER to exit.

To purchase or rent the videos from DivX

VOD

service at https://vod.divx.com/, use the registration

code and download the video onto a CD-R for

playback on this unit.

• All of the downloaded videos from DivX

VOD

can only be played back on this unit.

•For DivX

, the time search feature is not

available.

Setting the analog output

Set the analog output to match the playback

capability of this unit.

• Select [ANALOG OUTPUT] in

“AUDIO SETUP PAGE”.

STEREO

Select this to change channel output to stereo,

which only delivers sound from the two front

speakers.

LT/RT

Select this if this unit is connected to a Dolby

Pro Logic decoder.

Notes

Audio setup menu

AUDIO SETUP PAGE

ANALOG OUTPUT

DIGITAL AUDIO

HDMI AUDIO

NIGHT MODE

32 En

Setup Menu

Setting the digital output

The [DIGITAL AUDIO] options are:

[DIGITAL OUTPUT] and [LPCM OUTPUT].

1 In “AUDIO SETUP PAGE”, press 5/a to

highlight [DIGITAL AUDIO], and then

press 3.

2 Press 5/a to highlight an option.

3 Press 3.

DIGITAL OUTPUT

Set the digital output according to your

optional audio component connections.

OFF

Select this to turn off the digital output.

ALL

Select this if you have connected the digital

audio output jack to a multi-channel decoder/

receiver.

PCM ONLY

Select this only if your receiver is not capable

of decoding multi-channel audio signals.

• Even if “ALL” is selected, this unit converts

MPEG audio into 2 channel PCM and then

outputs to the connected component.

• When “PCM ONLY“ is selected, DTS digital

signal is muted.

LPCM OUTPUT

Select this if you have connected this unit to a

PCM-compatible receiver via a digital jack,

such as the coaxial jack. In this case, you may

need to adjust [LPCM OUTPUT].

Discs are recorded at a certain sampling rate.

The higher the sampling rate, the better the

sound quality.

48KHz

Select this to play back discs recorded at the

sampling rate of 48 kHz. All 96 kHz PCM data

streams (if available) are converted to the

sampling rate of 48 kHz.

96KHz

Select this to play back discs recorded at the

sampling rate of 96 kHz. If the 96 kHz disc is

copy protected, the digital output is

automatically converted to the sampling rate of

48 kHz. 48 kHz PCM data streams are output at

48 kHz.

4 Press 5/a to select a setting, and then

press ENTER.

Turning the HDMI audio on/off

When you connect this unit to an HDMI

compatible component via the HDMI jack,

select to turn on or off the HDMI audio output.

• Select [HDMI AUDIO] in “AUDIO

SETUP PAGE”.

Select this to turn on the HDMI audio output.

OFF

Select this to turn off the HDMI audio output.

• If you are not using the HDMI audio output, set

this to [OFF].

• If the monitor/receiver connected to this unit

using HDMI does not support HDMI audio signal

input, set this to [OFF].

• When audio signals are being output by HDMI-

compatible components, digital signals output at

the coaxial jack of this unit are muted.

• When [DIGITAL OUTPUT] is set to [OFF] on

this unit, HDMI audio signal is not output even if

[HDMI AUDIO] is set to [ON] and an HDMI

connection is established between the monitor

and receiver.

• When [DIGITAL OUTPUT] is set to [ALL] on

this unit, PCM signals are still output if the

monitor and receiver only support the PCM

format. However, the HDMI audio signal is

muted when audio format plays back the DTS

source.

Notes

33 En

Setup Menu

English

This unit can output the following audio signals

using HDMI: 32/44.1/48 kHz, 2ch linear PCM

signals and bitstream signals (Dolby Digital and

DTS).

Turning the night mode on/off

In the night mode, high volume output is

softened and low volume output is brought

upward to an audible level. It is useful when

you want to watch your favorite action movie

without disturbing others at night.

• Select [NIGHT MODE] in “AUDIO

SETUP PAGE”.

Select this to level out the volume. This

feature is only available for movies with the

Dolby Digital mode.

When you select this setting, invalidate the

dynamic range compression (DRC) of the

connected component.

OFF

Select this when you want to enjoy the full

dynamic range of surround sound.

TV type

This menu contains the options for selecting

the color system that matches your TV. For

details, see “Setting a color system for your

TV” on page 14.

Setting the TV display

Set the aspect ratio of this unit to match your

TV. The format you select must be available

on the disc. Otherwise, the TV display setting

will not affect the picture during playback.

• Select [TV DISPLAY] in “VIDEO

SETUP PAGE”.

4:3 PAN SCAN

Select this if the aspect ratio of your TV is 4:3

and you want both sides of the picture to be

trimmed or formatted to fit your TV screen.

4:3 LETTER BOX

Select this if the aspect ratio of your TV is 4:3.

In this case, a wide picture with black bands

on the upper and lower portions of the TV

screen are displayed.

16:9

Select this if you have a widescreen TV.

■ The relationship between the setting

of this unit and the TV display

When the aspect ratio of your TV is 4:3:

Video setup menu

VIDEO SETUP PAGE

TV TYPE

TV DISPLAY

PROGRESSIVE

PICTURE SETTING

BLACK LEVEL

CLOSED CAPTION

COMPONENT

HDMI SETUP

: [COMPONENT] is only for Europe and

Russia models.

.......

Setting

Playback

disc

TV display

4:3 PAN

SCAN

4:3 LETTER

BOX

16:9

4:3

16:9

4:3

34 En

Setup Menu

When the aspect ratio of your TV is 16:9

(widescreen):

*1: If the disc is not assigned to playback in

panscan, it is played in letterbox.

*2: The side of the picture may be stretched

depending on the TV. In this case, check the

screen size and aspect ratio of your TV.

Turning the progressive scan

function on/off

This feature is only available if you have

connected this unit to a progressive scan TV

through the component video jacks (see

“Component video jacks <A>” on page 10).

•Select [PROGRESSIVE] in “VIDEO

SETUP PAGE”.

OFF

Select this to disable the progressive scan

function.

Select this to enable the progressive scan

function.

Notes on activating progressive scan:

• Ensure that your TV is equipped with

progressive scan.

• Connect using a component video cable.

• When making HDMI connections, you

cannot select [PROGRESSIVE].

• (Europe and Russia models only) When

[COMPONENT] is set to [RGB] (see

page 36), you cannot select

[PROGRESSIVE].

• You can turn off the progressive scan

without using the setup mode if no picture is

displayed. See “No picture is displayed

when you do not use progressive scan

connections (using the component video

jacks)” in “Troubleshooting” on page 43.

Adjusting picture settings

This unit comes with three predefined sets of

picture color settings and one personal setting

that you can define yourself.

1 In “VIDEO SETUP PAGE”, press 5/a to

highlight [PICTURE SETTING], and then

press 3.

STANDARD

Select this for the standard picture setting.

BRIGHT

Select this to make the TV picture brighter.

SOFT

Select this to make the TV picture softer.

PERSONAL

Select this to personalize your picture color by

adjusting the brightness, contrast, tint and

color (saturation).

2 Press 5/a to select a setting, and then

press ENTER.

3 If you select [PERSONAL] in step 1,

proceed to steps 4-7.

16:9

4:3

Setting

Playback

disc

TV display

35 En

Setup Menu

English

➜ The “PERSONAL PICTURE SETUP”

menu appears.

4 Press 5/a to select one of the following

options.

BRIGHTNESS

Adjust the brightness of the picture. Zero (0) is

the average brightness setting value.

CONTRAST

Adjust the contrast of the picture. Zero (0) is

the average contrast setting value.

TINT

Adjust the balance of red and green of the

picture. Zero (0) is the average tint setting

value.

COLOR

Adjust the color level of the picture. Zero (0) is

the average color setting value.

5 Press 2 / 3 to adjust the setting that best

suits your personal preference.

6 Repeat steps 4-5 to adjust other color

features.

7 Press ENTER.

Turning the black level on/off

When [TV TYPE] is set to [NTSC] (see

page 14), this menu is effective for improving

the visibility of the black color in the dark area

on the screen. The black level setting has no

effect if [TV TYPE] is set to [PAL].

• Select [BLACK LEVEL] in “VIDEO

SETUP PAGE”.

Select this to improve the visibility of the

black color.

OFF

Select this for the standard black level setting.

This function is only available for composite video /

S-video output.

Turning the closed caption on/off

Closed captions are data hidden in the video

signals of specific discs and are invisible

without the use of a special decoder. The

difference between subtitles and captions is

that subtitles are intended for hearing persons

and captions are for the hearing impaired.

Subtitles rarely show all of the audio. For

example, captions show sound effects (e.g.,

“phone ringing”, “footsteps”), while subtitles

do not.

Before you select this function, ensure that the

disc contains closed caption information and

your TV also supports this function.

• Select [CLOSED CAPTION] in

“VIDEO SETUP PAGE”.

Select this to enable the closed caption

function.

OFF

Select this to disable the closed caption

function.

PERSONAL PICTURE SETUP

BRIGHTNESS

CONTRAST

TINT

COLOR

Note

36 En

Setup Menu

This function is only available for NTSC video

format and composite video / S-video output.

Switching YUV/RGB

(Europe and Russia models only)

This setting allows you to toggle the output of

the video signal between YUV (on VIDEO

OUT - COMPONENT) and RGB (on

SCART).

• Select [COMPONENT] in “VIDEO

SETUP PAGE”.

YUV

Select this for the component video

connection.

RGB

Select this for SCART connection.

Setting the HDMI video

When you connect this unit to an HDMI

compatible component via the HDMI jack,

select the following video output settings

depending on the connected component.

1 In “VIDEO SETUP PAGE”, press 5/a to

highlight [HDMI SETUP], and then press

2 Press 5/a to highlight an option.

3 Press 3 to enter a submenu.

WIDE SCREEN FORMAT

Set the aspect ratio of the projected images on

the screen. This feature is only available when

making HDMI connections and [TV

DISPLAY] is set to [16:9] (see page 33) when

playing back 4:3 image.

SUPERWIDE

Select to display a 4:3 image on the 16:9 screen

with non-linear stretching (center position of

screen is stretched less than the sides).

4:3 PILLAR BOX

Select to display a 4:3 image on the 16:9 screen

without stretching.

When playing a disc

recorded in the 16:9 image, the image is

displayed in its original aspect ratio (16:9)

without pillar boxes.

OFF

No aspect ratio adjustment is made when this

option is selected.

When the video signal is 480p or 576p, you cannot

select [WIDE SCREEN FORMAT], and no aspect

ratio adjustment is made even if [SUPERWIDE] or

[4:3 PILLAR BOX] is selected.

HDMI VIDEO

Set the resolution depending on the monitor

you are using. This unit is compatible with the

following video formats:

480p/60Hz, 576p/50Hz, 720p/50Hz, 60Hz,

1080i/50Hz, 60Hz, and 1080p/50Hz, 60Hz

480P

480 progressive-scan video

576P

576 progressive-scan video

720P

720 progressive-scan video

1080I

1080 interlaced video

1080P

1080 progressive-scan video

AUTO

The resolution is automatically selected to

match the monitor you are using.

Note

37 En

Setup Menu

English

• For the settings other than [AUTO], images may

not be displayed properly if a resolution output

setting is not supported by the HDMI component

you are using. In that case, follow the steps below

to return to [AUTO].

1 Press OPEN/CLOSE ( ) on the front panel

to open the disc tray.

2 Press 2.

3 Press SUBTITLE.

• You cannot set [TV TYPE], [PROGRESSIVE],

and [COMPONENT] (Europe and Russia

models) when making HDMI connections.

• When disconnecting the HDMI cable, the setting

of [TV TYPE] may be changed. If the component

video, S-video, or composite video signal is not

output correctly, see “Completely distorted

picture, black/white picture, or no picture” in

“Troubleshooting” on page 43 to set the correct

TV type again.

HD JPEG

This unit can display High-Definition JPEG

images when connecting to an HDMI

component using HDMI cable.

Displays JPEG pictures with high quality.

OFF

Displays JPEG pictures with standard quality.

• You can select [HD JPEG] when the HDMI video

signals with 720p, 1080i, and 1080p are output.

• You cannot select [HDMI SETUP] when JPEG

(including HD JPEG) pictures are displayed.

Press

twice to stop playback (if necessary)

before pressing SET UP.

Audio, subtitle and disc menu

These menus contain various language options

for the audio, subtitles, and disc menus

recorded on the DVD-Video. For details, see

“Setting the audio, subtitle, and disc menu

languages (DVD-Video only)” on page 16.

Restricting playback with parental

control

Some DVDs may have a parental level

assigned to the complete disc or to certain

scenes on the disc. This feature lets you set a

playback limitation level.

The rating levels are from 1 to 8 and are

country dependent. You can prohibit playback

of certain discs that are not suitable for your

children or play certain discs in alternative

scenes.

Notes

Preference setup menu

PREFERENCE PAGE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

VR LIST

DATA DISC NAV

DIVX SUBTITLE

PBC

: [DIVX SUBTITLE] is available for the

models other than Korea model.

.......

38 En

Setup Menu

1 In “PREFERENCE PAGE”, press 5/a to

highlight [PARENTAL], and then press 3.

2 Press 5/a to highlight a rating level for

the inserted disc, and then press ENTER.

• To disable parental controls and have

all discs play, select [8 ADULT].

3 Use the numeric buttons (0-9) to enter

the six-digit password (see “Changing the

password” on page 40).

➜ DVD discs that are rated above the

level you selected do not play unless

you enter your six-digit password.

Some DVD discs are not encoded with a rating

though the movie rating may be printed on the disc

cover. The rating level feature does not work for

such discs.

Selecting playback of VR format

There are two ways to play back a disc in VR

(Video Recording) format: ORIGINAL and

PLAY LIST.

1 In “PREFERENCE PAGE”, press 5/a to

highlight [VR LIST], and then press 3.

ORIGINAL LIST

Select this to play the originally recorded titles

on the disc.

PLAY LIST

Select this to play the edited version of the

disc. This feature is only available when a play

list has been created.

2 Press 5/a to highlight a setting, and then

press ENTER.

■ To play back a disc in VR format

3 Press SET UP to close the setup menu.

4 Press 3 / 8 to begin to play back the disc

with the setting you selected.

Selecting the data disc menu

Data disc navigator can be set only if the disc

was recorded with a menu. It allows you to

display folder menus when playing back a disc

with folder structure.

• Select [DATA DISC NAV] in

“PREFERENCE PAGE”.

WITHOUT MENU

Select this to display all the files contained in

the data disc.

WITH MENU

Select this to display only the folder menu of

the data disc.

Selecting DivX

external subtitle

group (except Korea model)

The font sets listed below are available for

DivX

external subtitle files. This setting

allows you to see the proper font set on-screen

to match the subtitle file.

• Select [DIVX SUBTITLE] in

“PREFERENCE PAGE”.

Note

PREFERENCE PAGE

AUDIO 1 KID SAFE

SUBTITLE 2 G

DISC MENU 3 PG

PARENTAL 4 PG 13

VR LIST 5 PGR

DATA DISC NAV 6 R

DIVX SUBTITLE 7 NC17

PBC 8 ADULT

: [DIVX SUBTITLE] is available for the

models other than Korea model.

.......

39 En

Setup Menu

English

GROUP1:

Albanian (sq), Basque (eu), Catalan (ca),

Danish (da), Dutch (nl), English (en),

Faroese (fo), Finnish (fi), French (fr),

German (de), Icelandic (is), Irish (ga),

Italian (it), Norwegian (no),

Portuguese (pt), Rhaeto-Romanic (rm),

Scottish (gd), Spanish (es), Swedish (sv)

GROUP2:

Albanian (sq), Croatian (hr), Czech (cs),

Hungarian (hu), Polish (pl), Romanian (ro),

Slovak (sk), Slovenian (sl)

GROUP3:

Bulgarian (bg), Byelorussian (be),

Macedonian (mk), Russian (ru), Serbian (sr),

Ukrainian (uk)

GROUP4:

Hebrew (iw), Yiddish (ji)

GROUP5:

Turkish (tr)

• Some external subtitle files may be displayed

incorrectly or not at all.

• Some discs cannot be played depending on disc

characteristics or recording conditions.

• The number of external subtitle files that can be

switched for the same movie file is limited to a

maximum of ten.

• For external subtitle files, the following subtitle

format filename extensions are supported (note

that these files are not shown within the disc

menu): .srt, .sub, .ssa, .smi

• The filename of the movie file has to be repeated

at the beginning of the filename for the external

subtitle file.

Selecting the PBC (playback

control) function

You can set playback control (PBC) to on or

off. This function is available only on Video

CD 2.0 with the playback control (PBC)

feature.

• Select [PBC] in “PREFERENCE

PAGE”.

Select this to display a disc menu.

OFF

Select this not to display a disc menu.

Playback starts from the beginning of a disc.

You can also use the MENU button on the remote

control to turn on or off the playback control (PBC)

function (see “Using the playback control (PBC)

menu” on page 20).

Setting the auto standby function

You can set auto standby function to on or off.

• Select [AUTO STANDBY] in

“PREFERENCE PAGE”.

Select this to set this unit to the standby mode

automatically when disc playback is stopped

or paused for more than 30 minutes.

OFF

Select this to disable the auto standby

function.

Notes

40 En

Setup Menu

Changing the password

The same password is used for both parental

control and disc lock. Enter your six-digit

password when prompted on the screen. The

default password is 000 000.

1 In “PREFERENCE PAGE”, press 5/a to

highlight [PASSWORD], and then press 3

to select [CHANGE].

2 Press ENTER to enter the “Password

Change Page”.

3 Use the numeric buttons (0-9) to enter

your old six-digit password.

• When doing this for the first time, enter

“000 000”.

• If you forget your old six-digit

password, enter “000 000”.

4 Enter the new six-digit password.

5 Enter the new six-digit password again to

confirm the password.

6 Press ENTER to confirm your new

password.

➜ The new six-digit password is now

valid.

Resetting the system

You can reset all options and your personal

settings to the initial factory settings,

excluding [PASSWORD], [PARENTAL], and

[DISC LOCK].

1 In “PREFERENCE PAGE”, press 5/a to

highlight [DEFAULT], and then press 3

to select [RESET].

2 Press ENTER.

➜ All settings are reset to the initial

factory settings.

PREFERENCE PAGE

PARENTAL

VR LIST

DATA DISC NAV

DIVX SUBTITLE

PBC

AUTO STANDBY

PASSWORD CHANGE

DEFAULT

: [DIVX SUBTITLE] is available for the

models other than Korea model.

.......

OLD PASSWORD

NEW PASSWORD

CONFIRM PWD

41 En

Language Codes

English

These codes can be used to select other languages. This does not affect the options in

“AUDIO”, “SUBTITLE”, or “DISC MENU”.

Abkhazian 6566 Gaelic 7168 Macedonian 7775 Sardinian 8367

Afar 6565 Gallegan 7176 Malagasy 7771 Scottish Gaelic 7168

Afrikaans 6570 Georgian 7565 Malay 7783 Serbian 8382

Albanian 8381 German 6869 Malayalam 7776 Shona 8378

Amharic 6577 Gikuyu 7573 Maltese 7784 Sindhi 8368

Arabic 6582 Greek 6976 Manx 7186 Sinhalese 8373

Armenian 7289 Guarani 7178 Maori 7773 Slovak 8375

Assamese 6583 Gujarati 7185 Marathi 7782 Slovenian 8376

Avestan 6569 Hausa 7265 Marshallese 7772 Somali 8379

Aymara 6589 Hebrew 7269 Moldavian 7779 Sotho, Southem 8384

Azerbaijani 6590 Herero 7290 Mongolian 7778 South Ndebele 7882

Bashkir 6665 Hindi 7273 Nauru 7865 Spanish 6983

Basque 6985 Hiri Motu 7279 Navaho 7886 Sundanese 8385

Belarusian 6669 Hungarian 7285 Navajo 7886 Swahili 8387

Bengali 6678 Icelandic 7383 Ndebele, North 7868 Swati 8383

Bihari 6672 Ido 7379 Ndebele, South 7882 Swedish 8386

Bislama 6673 Indonesian 7368 Ndonga 7871 Tagalog 8476

Bokmål, Norwegian 7866

Interlingua (International)

7365 Nepali 7869 Tahitian 8489

Bosnian 6683 Interlingue 7369 Northern Sami 8369 Tajik 8471

Breton 6682 Inuktitut 7385 North Ndebele 7868 Tamil 8465

Bulgarian 6671 Inupiaq 7375 Norwegian 7879 Tatar 8484

Burmese 7789 Irish 7165 Norwegian Bokmål 7866 Telugu 8469

Castilian 6983 Italian 7384 Norwegian Nynorsk 7878 Thai 8472

Catalan 6765 Japanese 7465 Nyanja 7889 Tibetan 6679

Chamorro 6772 Javanese 7486 Nynorsk, Norwegian 7878 Tigrinya 8473

Chechen 6769 Kalaallisut 7576 Occitan (post 1500) 7967 Tonga (Tonga Islands) 8479

Chewa 7889 Kannada 7578 Old Bulgarian 6785 Tsong 8483

Chichewa 7889 Kashmiri 7583 Old Church Slavonic 6785 Tswana 8478

Chinese 9072 Kazakh 7575 Old Slavonic 6785 Turkish 8482

Chuang 9065 Khmer 7577 Oriya 7982 Turkmen 8475

Church Slavic 6785 Kikuyu 7573 Oromo 7977 Twi 8487

Church Slavonic 6785 Kinyarwanda 8287 Ossetian 7983 Uighur 8571

Chuvash 6786 Kirghiz 7589 Ossetic 7983 Ukrainian 8575

Cornish 7587 Komi 7586 Pali 8073 Urdu 8582

Corsican 6779 Korean 7579 Panjabi 8065 Uzbek 8590

Croatian 7282 Kuanyama 7574 Persian 7065 Vietnamese 8673

Czech 6783 Kurdish 7585 Polish 8076 Volapük 8679

Danish 6865 Kwanyama 7574 Portuguese 8084 Walloon 8765

Dutch 7876 Lao 7679 Provençal 7967 Welsh 6789

Dzongkha 6890 Latin 7665 Pushto 8083 Wolof 8779

English 6978 Latvian 7686 Quechua 8185 Xhosa 8872

Esperanto 6979 Letzeburgesch 7666 Raeto-Romance 8277 Yiddish 8973

Estonian 6984 Limburgan 7673 Romanian 8279 Yoruba 8979

Faroese 7079 Limburger 7673 Rundi 8278 Zhuang 9065

Fijian 7074 Limburgish 7673 Russian 8285 Zulu 9085

Finnish 7073 Lingala 7678 Samoan 8377

French 7082 Lithuanian 7684 Sango 8371

Frisian 7089 Luxembourgish 7666 Sanskrit 8365

Language Codes

42 En

Troubleshooting

Refer to the chart below when this unit does not function properly. If the problem you are

experiencing is not listed below or if the instruction below does not help, set this unit to the

standby mode, disconnect the power cable, and contact the nearest authorized Yamaha

dealer or service center.

Problem Solution

No power Connect the AC power cable properly.

Press STANDBY/ON on the front panel to turn on the power.

This unit cannot read CD or

DVD

Use a commonly available CD/DVD lens cleaner to clean the lens

before sending this unit for repair.

“NO DISC” appears in the front

panel display

Check that the disc is placed in the disc tray correctly.

“UN DISC” appears in the front

panel display

The disc being loaded is not supported by this unit. Check the disc type

(see “Playable disc formats” on page 4).

Disc or file does not play The CD-R/RW, DVD+R/RW/R DL, and DVD-R/RW/R DL must be

finalized.

Check that the disc label is facing up.

Check whether the disc is defective by trying another disc.

If you have recorded a JPEG, MP3, or WMA disc yourself, check that

your disc contains at least ten JPEG picture files or five MP3/WMA

music tracks.

Check the region code (see “Region codes” on page 3).

For MP3/WMA, check that the sampling rate and bit rate are

compatible.

For JPEG, check that the resolution is compatible (see “Specifications”

on page 48).

For WMA/WMV, check that the file is not protected by DRM (Digital

Rights Management).

For WMV, check that the file has been encoded by WMV9.

For WMV, check that the file is not Advanced Profile.

For WMV, check that the resolution of the file is 720 x 480/720 x 576

pixels or less.

No picture Refer to the manual supplied with your TV to select the video input

channel correctly. Change the TV channel until you see the DVD

screen.

Turn on your TV.

Check the video connection.

No picture is displayed when

you make HDMI connections

(using the HDMI jacks)

Follow the steps below to change the [HDMI VIDEO] to [AUTO].

1. Press OPEN/CLOSE () on the front panel or press and hold

on the remote control to open the disc tray.

2. Press 2 on the remote control.

3. Press SUBTITLE on the remote control.

Troubleshooting

43 En

Troubleshooting

English

No picture is displayed when

you do not use progressive

scan connections (using the

component video jacks)

Follow the steps below to turn off the progressive scan.

1. Press OPEN/CLOSE () on the front panel or press and hold

on the remote control to open the disc tray.

2. Press 2 on the remote control.

3. Press ZOOM on the remote control to deactivate the progressive

scan.

Completely distorted picture,

black/white picture, or no

picture

Check that the disc is compatible with this unit (see “Playable disc

formats” on page 4).

Check that the TV type of this unit is set to match that of the disc and

your TV (see “Setting a color system for your TV” on page 14). Follow

the steps below to change the setting of [TV TYPE].

1. Press OPEN/CLOSE () on the front panel or press and hold

on the remote control to open the disc tray.

2. Press 3 on the remote control.

3. Press AUDIO on the remote control.

Distorted picture Occasionally, a small amount of picture distortion may appear

depending on the disc being played back. This is not a malfunction.

Check the video connection.

Picture freezes momentarily

during playback

Check the disc for fingerprints/scratches and clean it with a soft cloth

wiping from center to edge.

For WMV/DivX

, lowering the bit rate may improve the problem.

HD JPEG pictures cannot be

displayed

Check that [HD JPEG] is set to [ON] (see page 37).

The disc reading time may exceed 30 seconds.

MP3 music and HD JPEG pictures cannot be played simultaneously.

The screen size looks

unnatural, or the caption is

displayed only partially on the

TV monitor or is not displayed

at all

Check that the TV setting of this unit matches the screen size of your

TV (see “Setting the TV display” on page 33).

Change the screen size and the aspect ratio of your TV.

No sound or distorted sound Adjust the volume.

Check that the speakers are connected correctly.

Check the audio connection.

For MP3/WMA, check that the sampling rate and bit rate are

compatible with this unit (see “Specifications” on page 48).

For WMV/DivX

record the file onto your USB device at a lower

bit rate.

No audio at digital output Check the digital connections.

If you are playing a DTS source, check that your receiver can decode

DTS, and that [DIGITAL OUTPUT] is set to [ALL] (see page 32).

Check that the audio format of the selected audio language matches

your receiver capabilities.

No sound during DivX

movie

playback

The audio code may not be supported by this unit.

This unit does not respond to

the remote control

Aim the remote control directly at the remote control sensor on the front

panel.

Reduce the distance of the remote control from this unit.

Replace the batteries in the remote control.

Reinsert the batteries with their polarities (+/– signs) as indicated.

Problem Solution

44 En

Troubleshooting

Buttons do not work To completely reset this unit, unplug the AC cord from the AC outlet

for 5-10 seconds, plug the AC cord to the AC outlet again, and then turn

on this unit.

This unit does not respond to

some operating commands

during playback

Some operations may not be permitted by the disc. Refer to the

instructions of the disc jacket.

Menu items cannot be selected Press

twice on the remote control before selecting the setup menu.

Depending on the disc availability, some menu items cannot be

selected.

Your USB device cannot be

recognized

Check that your USB device is connected correctly.

Some devices may not be used even if they are USB mass storage class

devices.

Set this unit to the standby mode, and then turn it on again.

Disconnect your USB device when this unit is in the standby mode, then

connect it again and turn on this unit.

Connect the AC adapter if the adapter is supplied with your USB

device.

If “Device not supported” appears on the TV screen, check whether

your USB device is supported by this unit (see “Supported USB

devices” on page 23).

If “USB current protection active. Device not supported” appears on the

TV screen, your USB device is not usable with this unit (see “Supported

USB devices” on page 23).

This unit does not record CD

tracks onto your USB device

Check that your USB device is connected correctly.

Check that your USB device is compatible with this unit.

Tracks protected by SCMS (Serial Copy Management System) are

not recordable.

Copy protected music discs incompatible with CDDA standard are

not recordable.

Problem Solution

45 En

Troubleshooting

English

This unit stops recording CD

tracks onto your USB device

If “Max files reached” appears on the TV screen, delete any files you do

not need or create a new folder and then move some files to the created

folder so that the number of files on a root directory in your USB device

is reduced. This unit can record up to 648 files on each root directory. In

case the above message appears, press ENTER to cancel the recording.

If “USB full” appears on the TV screen, delete any files you do not need

so that there is enough space in your USB device. In case the above

message appears, press ENTER to cancel the recording.

If “Max tracks reached” appears on the TV screen, rename

“TRACK999” by using PC, etc. or create a new folder and then move

the file to the created folder. In case the above message appears, press

ENTER to cancel the recording.

If “USB device error” appears on the TV screen, check the connection

between this unit and the USB device. In case the above message

appears, press ENTER to cancel the recording.

If “Disc error” appears on the TV screen, check the disc for

fingerprints/scratches and clean it with a soft cloth wiping from center

to edge. In case the above message appears, press ENTER to cancel the

recording.

If “Copy protected” appears on the TV screen, check that the track is

not protected by SCMS (Serial Copy Management System). Tracks

protected by SCMS are not recordable. In case the above message

appears, press ENTER to cancel the recording.

The MP3 file recorded on your

USB device by using “MP3

RECORD” does not play or

stops during playback

If the recording has been canceled, playback stops at the canceled point.

Try recording again.

If “USB full”, “USB device error”, or “Disc error” has appeared on the

TV screen during the recording, created files cannot be played. Refer to

“This unit stops recording CD tracks onto your USB device” to solve

the problem and then try recording again.

The sound of recorded music

on your USB device is low-

quality, skips, or contains

unexpected noise

Check the CD (e.g., sound quality, noise, or fingerprints/scratches).

Problem Solution

46 En

Glossary

■ Analog

Sound that has not been converted into numerical

values. Analog sound varies, while digital sound has

specific numerical values. These jacks send audio

through two channels, the left and right.

■ Aspect ratio

The ratio of vertical and horizontal sizes of a displayed

image. The horizontal vs. vertical ratio of conventional

TVs is 4:3, and that of wide-screens is 16:9.

■ Audio output jacks

Jacks on the back of the DVD player that send audio to

another system (TV, Stereo, etc.).

■ Bit rate

The amount of data used to hold a given length of

music, measured in kilobits per seconds, or kbps. Or,

the speed at which you record. Generally, the higher the

bit rate, or the higher the recording speed, the better the

sound quality. However, higher bit rates use more space

on a disc.

■ Chapter

Sections of a picture or a music piece on a DVD that are

smaller than titles. A title is composed of several

chapters. Each chapter is assigned a chapter number

enabling you to locate the chapter you want.

■ Component video output jacks

Jacks on the back of the DVD player that send high-

quality video to a TV that has component video input

jacks (R/G/B, Y/P

B/PR, etc.).

■ Disc menu

A screen display prepared for allowing selection of

images, sounds, subtitles, multi-angles, etc. recorded on

a DVD.

■ Digital

Sound that has been converted into numerical values.

Digital sound is available when you use the digital

audio output jacks. These jacks send audio through

multiple channels, instead of just two channels as

analog does.

■ DivX

DivX

is a popular media technology created by DivX,

Inc. DivX

media files contain highly compressed

video with high visual quality that maintains a relatively

small file size. DivX

files can also include advanced

media features like menus, subtitles, and alternate audio

tracks. Many DivX

media files are available for

download online, and you can create your own using

your personal content and easy-to-use tools from

DivX.com.

■ DivX

Ultra

DivX

Ultra Certified products provide enhanced

playback of advanced media features supported by the

DivX

Media Format. Key features include interactive

video menus, subtitles, alternate audio tracks, video

tags, and chapter points.

■ DMF (DivX

Media Format)

The DivX

Media Format supports advanced media

features, adding controls for an interactive media

experience: interactive video menus, chapter points,

multi-language subtitles, and alternate audio tracks.

■ Dolby Digital

A surround sound system developed by Dolby

Laboratories containing up to six channels of digital

audio (front left and right, surround left and right, center

and subwoofer).

■ DTS

Digital Theatre Systems. This is a surround sound

system, but it is different from Dolby Digital. The

formats were developed by different companies.

■ HDCP

HDCP (High-bandwidth Digital Content Protection)

developed by Intel corporation, is a method to encrypt

digital video and audio data for purpose of content

protection. For further information on HDCP, visit the

HDCP website at “www.digital-cp.com”.

■ HD JPEG

HD (High-Definition) JPEG provides images in their

enhanced resolution via HDMI connection.

■ HDMI

HDMI (High-Definition Multimedia Interface) is the

first industry-supported, uncompressed, all-digital A/V

(audio/video) interface. Providing an interface between

any A/V source (such as a set-top box or A/V receiver)

and an audio/video monitor (such as a digital television-

DTV), HDMI supports standard, enhanced or high-

definition video as well as multi-channel digital audio

using a single cable. HDMI transmits all ATSC

(Advanced Television Systems Committee) HDTV

standards and supports 8-channel digital audio, with

bandwidth extra to accommodate future enhancements

and requirements.

When used in combination with HDCP (High-

bandwidth Digital Content Protection), HDMI provides

a secure audio/video interface that meets the security

requirements of content providers and system

operations. For further information on HDMI, visit the

HDMI website at “www.hdmi.org/”.

Glossary

47 En

Glossary

English

■ Interactive menu

Interactive video menus offer unprecedented

convenience and control so you can quickly navigate

between various scenes or bonus features, and select

from audio track and subtitle options.

■ JPEG

A very common digital still picture format. A still-

picture data compression system proposed by the Joint

Photographic Expert Group, which features small

decrease in image quality in spite of its high

compression ratio.

■ MP3

A file format with a sound data compression system.

“MP3” is the abbreviation of Motion Picture Experts

Group 1 (or MPEG-1) Audio Layer 3. By using MP3

format, one CD-R or CD-RW can contain about ten

times as much data as a regular CD can.

■ Parental control

A function of the DVD to limit playback of the disc by

the age of the users according to the limitation level in

each country. The limitation varies from disc to disc;

when it is activated, playback will be prohibited if the

software’s level is higher than the user-set level.

■ PCM (Pulse Code Modulation)

A system for converting analog sound signals to digital

signals for later processing, with no data compression

used in conversion.

■ Playback control (PBC)

Refers to the signal recorded on video CDs or SVCDs

for controlling reproduction. By using menu screens

recorded on a Video CD or SVCD that supports PBC,

you can enjoy interactive-type software as well as

software having a search function.

■ Play list

A list of selected titles to be played back in a specific

order. This option is only available with VR format and

must be created beforehand.

■ Progressive scan

It displays all the horizontal lines of a picture at one

time, as a signal frame. This system can convert the

interlaced video from DVD into progressive format for

connection to a progressive display. It dramatically

increases the vertical resolution.

■ Region code

A system for allowing discs to be played back only in

the region designated beforehand. This unit will only

play discs that have compatible region codes. You can

find the region code of your unit by looking on the

product label. Some discs are compatible with more

than one region (or ALL regions).

■ S-video

Produces a clear picture by sending separate signals for

the luminance and the color. You can use S-video only

if your TV has S-video input jack.

■ Surround

A system for creating realistic three dimensional sound

fields full of realism by arranging multiple speakers

around the listener.

■ Title

The longest section of a picture or music feature on

DVD, music, etc., in video software, or the entire album

in audio software. Each title is assigned a title number

enabling you to locate the title you want.

■ Video output jack

Jack on the back of the DVD player that sends video to

a TV.

■ VR (Video Recording) format

A format which enables you to create a DVD disc that

can be extensively re-edited.

48 En

Specifications

PLAYABLE DISC FORMATS

• DVD-Video

• DVD-R, DVD-RW, DVD-R DL

• DVD+R, DVD+RW, DVD+R DL

• Video CD, SVCD

•CD

• PICTURE CD

• CD-R, CD-RW

• MP3 (ISO 9660)

fs 32, 44.1, 48 kHz...................................... 96-320 kbps

•WMA

fs 44.1 kHz.................................................. 64-192 kbps

fs 48 kHz...................................................128-192 kbps

• WMV ..........................720 x 480/720 x 576 pixels or less

•DivX

• JPEG.........................................3072 x 2048 pixels or less

VIDEO PERFORMANCE

• Video (CVBS) output...........................1 Vpp into 75 ohm

• S-Video output................................Y: 1 Vpp into 75 ohm

C: 0.3 Vpp into 75 ohm

• Component video output.................Y: 1 Vpp into 75 ohm

B/CB (PB), PR/CR (PR): 0.7 Vpp into 75 ohm

• RGB (Scart) output (Europe and Russia models only)

......................................................Y: 0.7 Vpp into 75 ohm

AUDIO FORMAT

•Digital

Dolby Digital, DTS..........................Compressed digital

PCM......................... fs 44.1, 48, 96 kHz/16, 20, 24 bits

• Analog sound ...........................................................Stereo

AUDIO PERFORMANCE

• DA Converter............................................................24 bit

• Signal-Noise (1 kHz) .............................................105 dB

• Dynamic range (1 kHz)............................................ 97 dB

• DVD ..... fs 96 kHz, 2 Hz-44 kHz/fs 48 kHz, 2 Hz-22 kHz

• SVCD ..........................................fs 48 kHz, 2 Hz-22 kHz/

fs 44.1 kHz, 2 Hz-20 kHz

• CD, VCD...................................fs 44.1 kHz, 2 Hz-20 kHz

• Distortion and Noise (1 kHz).............................. 0.0035%

MULTIMEDIA APPLICATIONS

• Connections...................... USB mass storage class device

• Playback formats (USB device)

MP3............................. fs 32, 44.1, 48 kHz/96-320 kbps

WMA.......................................... fs 44.1 kHz/64-192 kbps,

fs 48 kHz/128-192 kbps

WMV .......................720 x 480/720 x 576 pixels or less

DivX

JPEG .....................................3072 x 2048 pixels or less

TV STANDARD

• Number of lines ............................. PAL: 625, NTSC: 525

• Vertical frequency...................PAL: 50 Hz, NTSC: 60 Hz

• Playback...............................Multi-standard (PAL/NTSC)

CONNECTIONS

• Video output ..............................RCA/Phono x 1 (yellow)

• S-video output.................................. Mini DIN, 4 pins x 1

• Component video output

Y output ....................................RCA/Phono x 1 (green)

B/CB (PB) output........................RCA/Phono x 1 (blue)

R/CR (PR) output..........................RCA/Phono x 1 (red)

• SCART (Europe and Russia models only)

............................................................. Euroconnector x 1

• Audio output (L+R) ....... RCA/Phono x 1 pair (white/red)

• Digital output

Coaxial.................................................. RCA/Phono x 1

(IEC60958 for CDDA, LPCM /

IEC61937 for Dolby Digital, DTS)

HDMI............................................................Type A x 1

• USB..................................................................Type A x 1

• Remote Control

Input........................................... 3.5 mm mini jack x 1

Output ........................................ 3.5 mm mini jack x 1

CABINET

• Dimensions (W x D x H) ....................435 x 310 x 51 mm

(17-1/8 x 12-3/16 x 2 in)

• Weight...................................Approx. 2.6 kg (5 lbs 12 oz)

POWER SUPPLY

• Power inlet

U.S.A. and Canada models.................AC 120 V, 60 Hz

Europe and Russia models..................AC 230 V, 50 Hz

Asia, and Central and South America models

.......................................AC 110-240 V, 50 Hz/60 Hz

Australia model............................AC 230-240 V, 50 Hz

Korea model ................................AC 110-240 V, 60 Hz

• Power consumption..................................... Approx. 16 W

• Standby power consumption.......................Less than 1 W

Specifications are subject to change without prior

notice.

LASER

Type Semiconductor laser GaAs/GaAlAs

Wave length 650 nm (DVD)

780 nm (VCD/CD)

Output Power 7 mW (DVD)

10 mW (VCD/CD)

Beam divergence 60 degrees

Specifications

DV-S6165

DVD PLAYER

LECTEUR DVD

DV-S6165

3139 245 30151

00cv_DV-S6165_U.fm Page 1 Monday, June 9, 2008 3:26 PM

Black process 45.0° 240.0 LPI

Documenttranscriptie

00cv_DV-S6165_U.fm Page 1 Monday, June 9, 2008 3:26 PM U DVD PLAYER LECTEUR DVD DV-S6165 ©2008 Yamaha Corporation All rights reserved. Black process 45.0° 240.0 LPI Printed in China 3139 245 30151 DV-S6165 IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ■ Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 i En Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Battery usage CAUTION - To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: – Install all batteries correctly, + and - asmarked on the unit. – Do not mix batteries (old and new or carbon and alkaline, etc.). – Remove batteries when the unit is not used for a long time. Apparatus shall not be exposed to dripping or splashing. Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). FCC INFORMATION (for US customers) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the product “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6660 Orangethorpe Ave. Buena Park, CA90620. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. We Want You Listening For A Lifetime Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion - and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. For Customer Use: Read carefully the information located at the rear panel of this unit and enter below the Serial No. Retain this information for future reference. Model No. Serial No. __________________________ CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. AVOID DIRECT EXPOSURE TO THE BEAM DANGER: INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM CAUTION:INVISIBLE LASER RADIATION WHEN OPEN ii En CAUTION: READ THIS BEFORE OPERATING THIS UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, or cold. In a cabinet, allow about 2.5 cm (1 inch) of free space all around this unit for adequate ventilation. 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 4 Do not expose this unit to sudden temperature changes from cold to hot, nor locate this unit in an environment with high humidity (i.e., a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. 5 Avoid installing this unit in a location where foreign objects may fall onto this unit or where this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: – – – Other components, as they may cause damage and/or discoloration on the surface of this unit. Burning objects (i.e., candles), as they may cause fire, damage to this unit, and/or personal injury. Containers with liquid in them, as they may fall, spilling the liquid and causing an electrical shock to the user and/or damage to this unit. 6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury. 7 Do not plug in this unit to a wall outlet until all connections are complete. 8 Do not operate this unit upside-down. It may overheat, possibly causing damage. 9 Do not use excessive force on switches, knobs and/ or cords. 10 When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord. 11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 12 Use only the voltage specified on this unit. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than as specified. 13 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reason. 14 When not planning to use this unit for long periods of time (i.e., vacation), disconnect the AC power plug from the wall outlet. iii En 15 Be sure to read the “Troubleshooting” section on common operating errors before concluding that this unit is faulty. 16 Before moving this unit, press STANDBY/ON to set the unit in standby mode, then disconnect the AC power plug from the wall outlet. 17 Install this unit near the AC outlet and where the AC power plug can be reached easily. 18 The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power. FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. LASER SAFETY This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. DANGER This unit emits visible laser radiation when open. Avoid direct eye exposure to beam. When this unit is plugged into a wall outlet, do not place your eyes close to the opening of the disc tray and other openings or look inside. Contents Playback Operation .................... 17 About this manual........................................ 3 Supplied accessories .................................. 3 Region codes ............................................... 3 Playable disc formats .................................. 4 Cleaning discs.............................................. 4 Patent information ....................................... 5 Basic operation.......................................... 17 Selecting a track/chapter ...................................17 Searching backward/forward ............................17 Repeat/Shuffle functions .......................... 17 Repeat/Shuffle playback ...................................17 Repeating a section within a chapter/track .......18 Operations for video playback (DVD/VCD/SVCD)..................................... 18 Using the disc menu..........................................18 Playback in slow motion ...................................18 Zooming pictures in/out....................................18 Resuming playback from the last stopped point ...........................................................................18 Using the on-screen display (OSD) ..................19 Special DVD features ................................ 20 Playing by title ..................................................20 Selecting an audio language/format and subtitle language ............................................................20 Special VCD/SVCD features...................... 20 Using the playback control (PBC) menu ..........20 Playing data discs (MP3/WMA/WMV/JPEG/DivX®)............... 21 Selecting a folder and track/file ........................21 Special picture disc features .................... 21 Using the preview function ...............................21 Zooming pictures in/out....................................22 Playback with multi-angles...............................22 Playing MP3 music and JPEG pictures simultaneously ..................................................22 Special DivX® features .............................. 22 Using the interactive menu ...............................22 Selecting an audio/subtitle language.................22 Using a USB device ................................... 23 Supported USB devices ....................................23 Playing data files...............................................23 Functional Overview ..................... 6 Front panel ................................................... 6 Rear panel..................................................... 7 Remote control............................................. 8 Connections................................... 9 General notes on connections ................... 9 Audio connections....................................... 9 Digital connection ...............................................9 Analog connection...............................................9 Video connections ..................................... 10 Component video jacks <A>.............................10 S-video jack ...............................................10 Composite video jack <C>................................10 SCART terminal <D> (Europe and Russia models only)......................10 HDMI connection........................................ 11 HDMI jack.........................................................11 Other connections ..................................... 12 USB port............................................................12 Remote control jacks .........................................12 Getting Started ............................ 13 Step 1: Inserting batteries into the remote control ...................................................... 13 Using the remote control ...................................13 Step 2: Turning on the power ................... 13 Step 3: Setting a TV type/display and language................................................... 14 Setting a color system for your TV ...................14 Setting an aspect ratio for your TV ...................15 Setting the OSD Language................................15 Setting the audio, subtitle, and disc menu languages (DVD-Video only) ...........................16 Continued 1 En English Introduction ................................... 3 Contents Setup Menu .................................. 25 Menu overview ........................................... 25 Setup menu operation ............................... 27 General setup menu .................................. 28 Locking/Unlocking the disc for viewing...........28 Recording CD tracks onto your USB device ....28 Programming disc tracks (except MP3/WMA/WMV/JPEG/DivX®)........30 Dimming the front panel display.......................30 OSD language ...................................................30 Setting the screen saver .....................................31 Setting the sleep timer .......................................31 Displaying the DivX® VOD registration code ...........................................................................31 Audio setup menu...................................... 31 Setting the analog output...................................31 Setting the digital output ...................................32 Turning the HDMI audio on/off........................32 Turning the night mode on/off ..........................33 Video setup menu ...................................... 33 TV type..............................................................33 Setting the TV display.......................................33 Turning the progressive scan function on/off ...34 Adjusting picture settings..................................34 Turning the black level on/off ...........................35 Turning the closed caption on/off .....................35 Switching YUV/RGB (Europe and Russia models only)......................36 Setting the HDMI video ....................................36 Preference setup menu ............................. 37 Audio, subtitle and disc menu ...........................37 Restricting playback with parental control........37 Selecting playback of VR format ......................38 Selecting the data disc menu .............................38 Selecting DivX® external subtitle group (except Korea model) ........................................38 Selecting the PBC (playback control) function ...........................................................................39 Setting the auto standby function ......................39 Changing the password .....................................40 Resetting the system..........................................40 2 En Language Codes ......................... 41 Troubleshooting.......................... 42 Glossary....................................... 46 Specifications.............................. 48 Europe model Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/ 96/EC and 2006/66/EC. This symbol mark is according to the EU directive 2002/96/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. Introduction Introduction Thank you for purchasing this unit. This owner’s manual explains the basic operation of this unit. • Illustrations in this manual are based on the Europe model unless otherwise specified. • Notes contain important information about safety and operating instructions. • y indicates a tip for your operation. • This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and the product, the product has priority. Region codes This unit is designed to support the region management system. Check the regional code number on the DVD disc package. If the number does not match the region code of this unit (see the table below or the back of this unit), this unit may be unable to play the disc. Destination U.S.A., Canada Region code of this unit Playable discs 1 1 ALL 2 2 ALL 3 3 ALL 4 4 ALL 5 5 ALL Europe Supplied accessories For Europe and Russia models • Remote control • Two batteries (AAA, R03, UM-4) for the remote control • RCA stereo cable • Composite video cable Asia, Korea Australia, Central and South America Russia For U.S.A., Canada, Central and South America, Australia, Asia, and Korea models • Remote control • Two batteries (AAA, R03, UM-4) for the remote control • Audio/video cable 3 En English About this manual Introduction Playable disc formats This unit is designed for use with discs having the logos shown below. Do not attempt to load any other type of disc into this unit. This unit can play: • DVD-R/RW/R DL and DVD+R/RW/R DL discs recorded in DVD-Video compatible format • DVD-R/RW discs recorded in VR format (compatible with CPRM) • MP3, WMA, WMV, and JPEG files recorded on CD-R/RW, DVD-R/RW, DVD+R/RW, and USB device • KODAK picture CDs, FUJICOLOR CDs • ISO 9660 Level1/Level2 for CD-R/RW • Up to 298 folders per disc/USB device and up to 648 files per folder with up to 8 hierarchies • DivX® files recorded on CD-R/RW, DVD-R/RW, DVD+R/RW, and USB device – Official DivX® Ultra Certified product – Plays all versions of DivX® video (including DivX® 6) with enhanced playback of DivX® media files and the DivX Media Format 4 En Notes • CD-R/RW, DVD-R/RW/R DL, and DVD+R/RW/ R DL cannot be played unless finalized. • Progressive JPEG, copyright-protected WMA and WMV files cannot be played with this unit. • This unit is not compatible with WMV Advanced profile. • Only the first session of DVD-R/RW/R DL and DVD+R/R DL can be played. • Discs without logos shown left are not guaranteed to function. • Some discs cannot be played depending on disc characteristics or recording conditions even if they have the logos shown left. • Do not use any non-standard shaped discs (heart-shaped, etc.). • Do not use discs with tape, seals, paste or many scratches on their surface. y For details about playable formats, see “Specifications” on page 48. Cleaning discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records. Introduction English Patent information Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent No’s : 5,451,942 and other U.S. and worldwide patents issued and pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. Copyright 1996-2007 DTS, Inc. All Rights Reserved. DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. 5 En Functional Overview Functional Overview Front panel 1 2 3 45 1 STANDBY/ON Turns on this unit or sets it to the standby mode (see page 13). In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. 2 Disc tray Loads a disc in the disc tray (see page 17). 3 OPEN/CLOSE ( ) Opens or closes the disc tray (see page 17). 4 HDMI indicator Lights up when an HDMI component is connected and signals output via the HDMI jack of this unit. 5 PROGRESSIVE indicator Lights up when this unit is in the progressive mode (see page 34). 6 En 6 7 8 9 0 q 6 Front panel display Shows the current status of this unit. 7 Remote control sensor Receives infrared signals from the remote control (see page 13). 8 PLAY ( p ) Starts playback. 9 PAUSE ( ) Pauses playback. Frame-by-frame playback (see page 17). 0 STOP ( s ) Stops playback. q USB port Connect the USB connector of your USB device (see page 12). Functional Overview English Rear panel PR / CR COMPONENT Y MAINS IN AUDIO OUT 1 VIDEO HDMI REMOTE CONTROL OUT 2 3 4 COAXIAL DIGITAL OUT PB / CB S VIDEO VIDEO OUT 5 678 AV 9 (Europe model) 1 AC power cable Plug the power cable into the AC wall outlet. 2 REMOTE CONTROL (IN, OUT) jacks Connect the REMOTE CONTROL (IN) jack of this unit to the remote control output jack of your Yamaha AV receiver (see page 12). Connect the REMOTE CONTROL (OUT) jack of this unit to the remote control input jack of your Yamaha component. 3 HDMI jack Connect to the HDMI input jack of your HDMI component (see page 11). 4 AUDIO OUT (L, R) jacks Connect to the audio input jacks of your AV receiver or stereo system (see page 9). 5 DIGITAL OUT - COAXIAL jack Connect to the coaxial input jack of your AV receiver (see page 9). 6 VIDEO OUT - COMPONENT (Y, PB/CB, PR/ CR) jacks Connect to the component input jacks of your AV receiver (see page 10). 7 VIDEO OUT - S VIDEO jack Connect to the S-video input jack of your AV receiver (see page 10). 8 VIDEO OUT - VIDEO jack Connect to the composite video input jack of your AV receiver (see page 10). 9 AV terminal (Europe and Russia models only) Connect to the SCART input terminal of your TV (see page 10). Caution: Do not touch the inner pins of the jacks on the rear panel of this unit. Electrostatic discharge may cause permanent damage to this unit. 7 En Functional Overview Remote control 6 7 Stops playback (see page 17). Opens the disc tray.* 1 2 7 Numeric buttons (0-9) 0 Selects numbered items in the currently displayed menu. 8 SUBTITLE 3 4 5 6 7 8 9 Selects the subtitle language (see pages 20 and 22). q w e r 9 ZOOM Enlarges or shrinks the video image (see pages 18 and 22). 0 ON SCREEN Accesses or exits from the on-screen display (OSD) menu of this unit (see page 19). t y u q SET UP Accesses or exits from the setup menu of this unit (see pages 14 and 27). w 33l Moves to the next chapter or track (see page 17). Searches forward (see page 17).* 1 Turns on this unit or sets it to the standby mode (see page 13). In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. 2 TOP MENU/RETURN Displays the top-level disc menu (DVD). Moves back to the previous menu (DVD*/VCD) (see page 20). 3 2 / 3/5/a Selects an item in the currently displayed menu. Search or slow playback (see page 27). ENTER Confirms the menu selection (see page 27). 4 MENU Displays the menu of a disc (DVD/JPEG) (see pages 18, 20, 21 and 22). Switches PBC on or off (VCD) (see page 20). 5 l22 Moves to the previous chapter or track (see page 17). Searches backward (see page 17).* 8 En e 3/ 8 Starts or pauses playback (see page 17). r USB Accesses the contents of the connected USB device or exits from the USB mode (see page 23). t AUDIO Selects the audio language or format (see pages 20 and 22). y REPEAT Accesses or exits from the repeat/shuffle mode (see page 17). u REPEAT A-B Repeats a specified segment (see page 18). * Press and hold the button for about two seconds. Connections Connections Be sure to turn off this unit and unplug the power cable before you make or change connections. • Depending on the component you want to connect, there are various ways to make connections. Possible connections are described below. • Refer to the manuals supplied with your other components as necessary to make the best connections. • Do not connect this unit via your VCR. The video quality could be distorted by the copy protection system. • Do not connect the audio out jack of this unit to the phono in jack of your audio system. Audio connections Digital connection This unit has a digital coaxial output jack. Connect the DIGITAL OUT - COAXIAL jack of this unit to your AV receiver equipped with a Dolby Digital or DTS decoder using a commercially available coaxial digital audio cable. This unit (Europe model) PR / CR COMPONENT Y Notes • You need to set [DIGITAL OUTPUT] to [ALL] (see “DIGITAL OUTPUT” on page 32). • If the audio format of the digital output does not match the capabilities of your receiver, the receiver produces a distorted sound or no sound at all. Make sure to select the appropriate audio format from the menu screen on the disc. Pressing AUDIO on the remote control once or more may change not only the audio languages but also the audio format. The selected format appears on the TV screen for several seconds. • If you want to enjoy Dolby Digital and DTS formats, you must connect this unit to an AV receiver that supports these formats. Analog connection This unit has 2-ch analog output jacks. Connect the AUDIO OUT (L, R) jacks of this unit to the corresponding input jacks of your audio component (such as a stereo amplifier) using the supplied RCA stereo cable (Europe and Russia models) or audio/video cable (other models). This unit (Europe model) PR / CR COMPONENT Y AUDIO OUT L L AUDIO OUT COAXIAL DIGITAL OUT R VIDEO PB / CB S VIDEO VIDEO OUT COAXIAL DIGITAL OUT VIDEO PB / CB S VIDEO VIDEO OUT AV RCA stereo cable (Europe and Russia models) or audio/video cable (other models) (supplied) R AV Stereo amplifier C Coaxial digital audio cable C L R AV receiver Speakers Speakers 9 En English General notes on connections Connections Video connections Make video connections to your receiver and TV so that you can use one TV for several different video sources (LD, VCR, etc.) by simply switching the input source selector of your receiver. This unit has several types of video output jacks. Use the one that corresponds to the input jacks of the component to be connected. This unit (Europe model) PR / CR COMPONENT Y AUDIO OUT PB / CB S VIDEO VIDEO OUT COAXIAL DIGITAL OUT PB PR VIDEO AV S Y Component video cable V Composite video cable (Europe and Russia models) or audio/video cable (other models) (supplied) S-video cable <A> PR PB PR/CR Y PB/CB V S <C> <D> Y COMPONENT VIDEO IN S VIDEO INPUT AV receiver VIDEO INPUT SCART cable COMPONENT VIDEO OUT S VIDEO OUT VIDEO OUT COMPONENT VIDEO IN S VIDEO IN VIDEO IN TV Component video jacks <A> Component video connections achieve higher fidelity color reproduction than S-video connections by transmitting video signals on separate wires for luminance (Y: green) and chrominance (PB: blue, PR: red). Connect the VIDEO OUT - COMPONENT (Y, PB/CB, PR/CR) jacks of this unit to component input jacks of your AV receiver and then to those of your TV using a 10 En commercially available component video cable. Observe the color of each jack when you make connections. If your receiver does not have component output jacks, you can achieve a better video image by connecting the component output jacks of this unit directly to the component input jacks of your TV. S-video jack S-video connections achieve a clearer picture than composite video connections by transmitting video signals on separate wires for luminance (Y) and chrominance (C). Connect the VIDEO OUT - S VIDEO jack of this unit to an S-video input jack of your AV receiver and then to that of your TV using a commercially available S-video cable. Composite video jack <C> Connect the VIDEO OUT - VIDEO jack of this unit to a video input jack of your AV receiver and then to that of your TV using the supplied composite video cable (Europe and Russia models) or audio/video cable (other models). SCART terminal <D> (Europe and Russia models only) You may connect the TV directly to this unit. Connect the AV terminal of this unit to the SCART input terminal of your TV using a commercially available SCART cable. The AV terminal outputs composite and RGB video signals together with 2-ch audio signal. Set the output of the video signal in “Switching YUV/RGB (Europe and Russia models only)” on page 36. Connections Notes HDMI jack HDMI (High-Definition Multimedia Interface) provides high quality digital audio and video on a single connection. Connect the HDMI jack of this unit to an HDMI input jack of your AV receiver, and then to that of your TV using a commercially available HDMI cable. If your receiver does not have an HDMI input jack, you can achieve a better video image by connecting the HDMI jack of this unit directly to the HDMI input jack of your TV. This unit can display High-Definition JPEG images (720p, 1080i, or 1080p) when you connect this unit to an HDTV via the HDMI jack. For details, see “HD JPEG” on page 37. This unit (Europe model) • You need to set [HDMI AUDIO] (see page 32) and [HDMI VIDEO] (see page 36) properly. • You need to make appropriate audio connections if the connected component does not output audio signals (see “Audio connections” on page 9). • This unit is not compatible with HDCPincompatible HDMI or DVI components. • You need a commercially available HDMI/DVI conversion cable when you connect this unit to other DVI components. In this case, the HDMI jack of this unit does not output any audio signals. • Depending on the connected DVI component, black and white in the image may not be distinct. In that case, adjust the picture setting of the connected DVI component. • Do not disconnect or turn off the power of the HDMI/DVI component connected to the HDMI jack of this unit during playback. Doing so may disrupt playback or cause noise. y PR / CR COMPONENT Y VIDEO HDMI AUDIO OUT COAXIAL DIGITAL OUT When connecting an HDMI component, refer to the manual supplied with your component. PB / CB S VIDEO VIDEO OUT HDMI cable HDMI IN AV receiver HDMI OUT HDMI IN TV 11 En English HDMI connection Connections Other connections USB port This unit has a USB port and can access MP3, WMA, WMV, JPEG, and DivX® files saved on your USB device. Connect a USB connector of your USB device to the USB port on the front panel of this unit. When your USB device is connected to the USB port of this unit, you can record tracks on a CD onto your USB device in MP3 format. For details, see “Recording CD tracks onto your USB device” on page 28. To disconnect the USB device, press 7 to stop playback, press USB to return to the disc mode, and then disconnect the device from this unit. Remote control jacks This unit has remote control input/output jacks. If your AV receiver is a Yamaha product and has the capability to transmit SCENE control signals, you can use the SCENE function. Connect the REMOTE CONTROL (IN) jack of this unit to a remote control output jack of your receiver using a commercially available monaural 3.5 mm mini plug cable so that this unit starts playback automatically by simply pressing a SCENE button of your receiver. This unit MAINS HDMI REMOTE CONTROL OUT IN This unit Monaural 3.5 mm mini plug cable REMOTE OUT AV receiver USB device y Note This unit may not recognize some USB devices. y For details about the USB features, see “Using a USB device” on page 23. 12 En • For details about the SCENE function, refer to the owner’s manual supplied with your Yamaha AV receiver. • You can connect a Yamaha component (such as DVD player and CD player) corresponds with the SCENE function to the REMOTE CONTROL (OUT) jack of this unit. Getting Started Getting Started Using the remote control Use the remote control within 6 m (approximately 20 ft) of this unit and point it toward the remote control sensor. 3 1 Within 6 m (approximately 20 ft) 2 1 Open the battery compartment. 2 Insert the two supplied batteries (AAA, R03, UM-4) following the indications (+/–) inside the compartment. 3 Close the cover. Notes • Insert batteries correctly according to the polarity markings (+/–). Batteries inserted in the opposite orientation may leak. • Replace the exhausted batteries immediately with new ones to prevent leakage. • Remove the batteries from the compartment if the remote control is not used for more than a month. • If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. • Do not use old batteries together with new ones. • Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color. • Dispose of the batteries correctly in accordance with your local regulations. Notes • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following types of conditions: – places of high humidity, such as near a bath – places of high temperature, such as near a heater or stove – places of extremely low temperature – dusty places • When the remote control works unstably, point it at an angle upward to the sensor. Step 2: Turning on the power 1 Plug the power cable into the AC outlet. 2 Turn on your TV and AV receiver. 3 Select the appropriate input source of the AV receiver (refer to the manual supplied with your AV receiver). 4 Press STANDBY/ON on the front panel or on the remote control to turn on this unit. ➜ The front panel display lights up. 5 Set the TV to the correct video input (refer to the manual supplied with your TV). ➜ The default screen appears on the TV. 13 En English Step 1: Inserting batteries into the remote control Getting Started Step 3: Setting a TV type/display and language You can customize this unit using the setup menu displayed on the TV screen. PAL Select this if the connected TV is a PAL system TV. It will change the video signals of NTSC discs and output them in PAL format. NTSC Note Select this if the connected TV is an NTSC system TV. It will change the video signals of PAL discs and output them in NTSC format. Unless stated otherwise, all operations described here are carried out using the supplied remote control. MULTI y • To return to the previous menu, press 2. • If the setting you have selected are not appropriate, you can reset all settings to the initial factory settings (see “Resetting the system” on page 40). Setting a color system for your TV This unit is compatible with both NTSC and PAL video formats. Select the color system that matches your TV. * PAL NTSC MULTI is only for Europe and *: [COMPONENT] Russia models. 1 Press SET UP. 2 Press 3 repeatedly to select “VIDEO SETUP PAGE”. 3 Press 5/a to highlight [TV TYPE], and then press 3. 4 Press 5/a to highlight one of the following options. 14 En 5 Select an item, and then press ENTER. 6 Press SET UP to exit from the menu. Notes • Before changing the current TV standard setting, ensure that your TV supports the selected TV type. • When making HDMI connections, you cannot change or select [TV TYPE]. y VIDEO SETUP PAGE TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING BLACK LEVEL CLOSED CAPTION ....... COMPONENT HDMI SETUP Select this if the connected TV is compatible with both NTSC and PAL formats (such as a multi-system TV). The output format will be in accordance with the video signals of the disc. If the picture is not displayed properly on your TV, wait for 15 seconds for this unit to activate automatic recovery. Getting Started Setting the OSD Language You can set the aspect ratio of this unit to match your TV. If the aspect ratio of your TV is 16:9, you do not need to change this setting. For details, see “Setting the TV display” on page 33. You can select your own preferred language for the setup menu. This setting remains once selected. GENERAL SETUP PAGE VIDEO SETUP PAGE * TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING BLACK LEVEL CLOSED CAPTION ....... COMPONENT HDMI SETUP 4:3 PAN SCAN 4:3 LETTER BOX 16:9 is only for Europe and *: [COMPONENT] Russia models. 1 Press SET UP. 2 Press 3 repeatedly to select “VIDEO SETUP PAGE”. 3 Press 5/a to highlight [TV DISPLAY], and then press 3. 4 Press 5/a to highlight the desired setting, and then press ENTER. DISC LOCK MP3 RECORD PROGRAM DISPLAY DIM OSD LANGUAGE SCREEN SAVER SLEEP DIVX(R) VOD CODE ENGLISH DANSK DEUTSCH ESPAÑOL FRANÇAIS ITALIANO NEDERLANDS NORSK * menu items may change depending on *: The the models. 1 Press SET UP. 2 Press 2 / 3 to select “GENERAL SETUP PAGE”. 3 Press 5/a to highlight [OSD LANGUAGE], and then press 3. 4 Press 5/a to select a language, and then press ENTER. 5 Press SET UP to exit from the menu. 5 Press SET UP to exit from the menu. 15 En English Setting an aspect ratio for your TV Getting Started Setting the audio, subtitle, and disc menu languages (DVD-Video only) You can select your own preferred language for the audio, subtitle, and disc menu. This unit automatically switches to the selected language whenever you load a disc. If the selected language is not available on the disc, the default language of the disc will be used instead. PREFERENCE PAGE AUDIO SUBTITLE DISC MENU PARENTAL VR LIST DATA DISC NAV DIVX SUBTITLE PBC ENGLISH CHINESE (SIMP) FRENCH SPANISH RUSSIAN POLISH ITALIAN TURKISH * menu items may change depending on *: The the models. 1 Press 7 twice to stop playback (if necessary), and then press SET UP. 2 Press 3 repeatedly to select “PREFERENCE PAGE”. 3 Press 5/a to highlight one of the options below, and then press 3. • AUDIO (audio language) • SUBTITLE (subtitle language) • DISC MENU (disc menu language) 4 Press 5/a to select a language, and then press ENTER. 5 Repeat steps 3-4 for other language settings. 6 Press SET UP to exit from the menu. 16 En ■ To select a language not in the list 1 Select [OTHERS] in [AUDIO], [SUBTITLE], or [DISC MENU], and then press ENTER. 2 Use the numeric buttons (0-9) to enter the 4-digit language code (see “Language Codes” on page 41), and then press ENTER. 3 Press SET UP to exit from the menu. Playback Operation Playback Operation Selecting a track/chapter • If the prohibited icon ( ) appears on the TV screen when a button is pressed, the function for that button is not available on the current disc or at the current time. • Depending on the disc, some operations may operate differently or be restricted. Refer to the instruction supplied with the disc. • Do not push on the disc tray or put any objects other than discs on the disc tray. Doing so may cause this unit to malfunction. 1 Press l22 / 33l or use the numeric buttons (0-9) to select a track/chapter number. 2 During repeated playback, press l22 / 33l to replay the same track/chapter. Searching backward/forward 1 Press and hold l22 / 33l or press 2 / 3. 2 While searching, press l22 / 33l or 2 / 3 repeatedly to select the desired speed. Basic operation 1 Make sure this unit is turned on. 3 To resume normal playback, press 3 / 8. 2 Press OPEN/CLOSE ( Note ) on the front panel to open the disc tray. 3 Place the disc in the disc tray with the printed side up. 4 Press OPEN/CLOSE ( y ) again to close the disc tray. ➜ After recognizing the disc, this unit starts playback automatically. • If you press 3 / 8 when the disc tray is open, the disc tray closes and playback starts automatically. 5 To pause playback, press 3 / 8 during playback. ➜ Playback is paused and the sound is muted. • Frame-by-frame playback can be done by pressing PAUSE ( ) on the front panel repeatedly. 6 To resume normal playback, press 3 / 8 again. 7 To stop playback, press 7. The 2 / 3 key may not be available with some discs. For MP3, WMA, WMV, and DivX®, the search function allows you to search the track currently being played. Repeat/Shuffle functions Repeat/Shuffle playback Each time you press REPEAT during playback, the front panel display changes as follows: DVD-Video ➜ RPT ONE (repeat chapter) ➜ RPT TT (repeat title) ➜ RPT ALL (repeat all) ➜ SHUFFLE (shuffle) ➜ RPT SHF (shuffle repeat) ➜ RPT OFF (repeat off) DVD VR format ➜ RPT ONE (repeat chapter) ➜ RPT TT (repeat title) ➜ RPT ALL (repeat all) ➜ RPT OFF (repeat off) 17 En English Notes Playback Operation VCD/SVCD/CD ➜ RPT ONE (repeat track) ➜ RPT ALL (repeat all) ➜ SHUFFLE (shuffle) ➜ RPT SHF (shuffle repeat) ➜ RPT OFF (repeat off) MP3/WMA/WMV/DivX® ➜ RPT ONE (repeat file) ➜ RPT FLD (repeat folder) ➜ SHUFFLE (shuffle) ➜ RPT OFF (repeat off) Note For VCD/SVCD, repeat playback is not available when the PBC mode (see “Special VCD/SVCD features” on page 20) is on. ■ To select a playback feature or item Use 2 / 3/5/a or the numeric buttons (0-9), and then press ENTER to start playback. ■ To access or exit from the menu Press MENU. Playback in slow motion You can play back video in slow motion. 1 During playback, press 5 for reverse slow motion or a for forward slow motion. 2 During slow motion, press 5/a repeatedly to select the desired speed. 3 To resume normal playback, press 3 / 8. Repeating a section within a chapter/track Note 1 While playing a disc, press REPEAT A-B For VCD and SVCD, reverse slow motion is not available. at the desired starting point. ➜ “SET A” appears in the front panel display. 2 Press REPEAT A-B again at the desired end point. • A and B can only be set within the same chapter/track. ➜ “RPT AB” appears in the front panel display and the selected section repeats continuously. 3 To exit from the sequence, press REPEAT A-B. Zooming pictures in/out You can enlarge or shrink the picture on the TV screen and pan through the enlarged picture. 1 During playback, press ZOOM repeatedly to display the picture at different scales. • Use 2 / 3/5/a to pan through the enlarged picture. ➜ Playback continues. 2 Press ZOOM repeatedly to return to the original size. Operations for video playback (DVD/VCD/SVCD) Using the disc menu Depending on the disc, a menu may appear on the TV screen once you load the disc. 18 En Resuming playback from the last stopped point You can resume playback of the last ten discs, even if the discs were ejected or this unit was set to the standby mode. Playback Operation ➜ “LOADING” appears on the TV screen. 2 Press 3 / 8 while “LOADING” is displayed on the TV screen. ➜ “RESUME PLAY” appears on the TV screen and the disc is played back from the last point. ■ To cancel the resume mode When playback is stopped, press 7 again. 2 Press 5/a to scroll the information, and then press ENTER to access the selected item. 3 Use the numeric buttons (0-9) to input the number/time or press 5/a to make a selection, and then press ENTER. ➜ Playback changes to the selected time/ title/chapter/track. ■ Changing the Title/Chapter/Track (DVD/VCD) 1 Press 5/a to select [TITLE], Note [CHAPTER] (DVD), or [TRACK] (VCD). For DVD VR format, resume playback is not available. Using the on-screen display (OSD) The OSD menu shows disc playback information (e.g., the title or chapter number, elapsed playing time or audio/subtitle language). A number of operations are possible without interrupting disc playback. 1 During playback, press ON SCREEN. ➜ A list of available disc information appears on the TV screen. 02/14 02/14 5.1CH ENG TITLE ELAPSED 0:02:25 VCD/SVCD BITRATE 16 ■ Time search (DVD/VCD) 1 Press 5/a to select [TT TIME] / [CH TIME] (DVD) or [DISC TIME] / [TRACK TIME] (VCD). • [TT TIME] refers to the total time of the current title, and [CH TIME] refers to the total time of the current chapter. 2 Press ENTER. ■ Changing the Audio/Subtitle/Angle (DVD) You can change [AUDIO], [SUBTITLE], or [ANGLE] if these functions are available on the disc you are playing. 1 Press 5/a to select [AUDIO], MENU TRACK DISC TIME TRACK TIME REPEAT using the numeric buttons (0-9). to right using the numeric buttons (0-9) (e.g. 0:34:27). MENU BITRATE 16 3 Select a title, chapter, or track number 3 Enter hours, minutes and seconds from left DVD TITLE CHAPTER AUDIO SUBTITLE 2 Press ENTER. 02/14 0:49:17 0:03:43 OFF [SUBTITLE], or [ANGLE]. 2 Press ENTER. TOTAL ELAPSED 0:02:25 19 En English 1 Load one of the last ten discs. Playback Operation 3 For Audio and Subtitle: Press 5/a to highlight your selection, and then press ENTER. For Angle: Select an angle using the numeric buttons (0-9). ■ Repeat/Time Display (DVD/VCD) 1 Press 5/a to select [REPEAT] or [TIME DISP.]. 2 Press ENTER. 3 Press 5/a to highlight your selection, and Selecting an audio language/ format and subtitle language ■ To select an audio language/format Press AUDIO repeatedly to select an audio language and/or format. ■ To select a subtitle language Press SUBTITLE repeatedly to select a subtitle language. Special VCD/SVCD features then press ENTER. Using the playback control (PBC) menu ■ Time display (CD) Each time you press ON SCREEN, the time display changes as follows: TOTAL ELAPSED TOTAL REMAIN SINGLE REMAIN SINGLE ELAPSED Note Depending on the disc, the OSD menu may not be displayed even if you press ON SCREEN. Special DVD features For a VCD with a playback control (PBC) feature (version 2.0 only) 1 Press MENU to toggle between “PBC ON” and “PBC OFF”. ➜ If you select “PBC ON”, the disc menu appears (if available) on the TV screen. 2 Use the numeric buttons (0-9) to select a playback option. • Press l22 / 33l to move to the previous/next page (if available). 3 During playback, press TOP MENU/ RETURN to return to the menu screen. Playing by title 1 Press MENU. ➜ The disc title menu appears on the TV screen. 2 Use 2 / 3/5/a or the numeric buttons (0-9) to select a playback option. 3 Press ENTER. 20 En ■ To skip the index menu and play back a disc from the beginning Press MENU to turn off the PBC function. Playback Operation English Playing data discs (MP3/WMA/WMV/JPEG/DivX®) Selecting a folder and track/file 1 Press 5/a to select a folder, and then press ENTER to open the folder. 1 Load a data disc. • The disc reading time may exceed 30 seconds due to the complexity of the directory/file configuration. ➜ The data disc menu appears on the TV screen. 00:00 00:00 001/020 Favorite MP3 Piano MP3 Cello MP3 Jazz MP3 Live 2 Playback starts automatically. If not, press 3 / 8. 3 Press l22 / 33l to select another track/file in the current folder. Notes • For JPEG, some files may not be displayed correctly depending on the aspect ratio of the image. • It may not be possible to play certain MP3/ WMA/WMV/JPEG/DivX® discs due to the configuration and characteristics of the discs or the recording conditions. • HD JPEG images may not be displayed correctly when the first image is displayed or the disc is ejected. For details about HD JPEG, see “HD JPEG” on page 37. • Depending on the picture size, HD JPEG images may appear smaller in size. 2 Press 5/a to select a track/file. 3 Press ENTER. ➜ Playback starts from the selected file to the end of the folder. Special picture disc features 1 Load a picture disc (JPEG, KODAK Picture CD, or FUJICOLOR CD). ➜ For JPEG, the picture menu appears on the TV screen. ➜ For KODAK Picture CD and FUJICOLOR CD, the slideshow begins. ■ For JPEG 2 Press 3 / 8 to start the slideshow. Using the preview function This function displays the content of the current folder or the entire disc. 1 Press 7 during playback. ➜ 12 thumbnails appear on the TV screen. 2 Press l22 / 33l to display the other thumbnails on the previous/next page. 21 En Playback Operation 3 Use 2 / 3/5/a to highlight one of the thumbnails, and then press ENTER to start playback. OR Move the cursor to highlight on the bottom of the page and then press ENTER to start playback from the first thumbnail on the current page. 3 During MP3 music playback, select a JPEG picture file from the TV screen, and then press ENTER. ➜ The picture files are played back one after another until the end of the folder. 4 To quit simultaneous playback, press MENU, and then press 7. ■ For JPEG Notes 4 Press MENU to return to the data disc • Some files cannot be played correctly depending on disc characteristics or recording conditions. • This function is not available when [HD JPEG] is set to [ON] (see page 37). menu. Zooming pictures in/out 1 During playback, press ZOOM repeatedly to display the picture at different scales. 2 Use 2 / 3/5/a to pan through the enlarged picture. Playback with multi-angles During playback, press 2 / 3/5/a to rotate the picture on the TV screen. 2: rotates the picture counter-clockwise 3: rotates the picture clockwise 5: flips the picture vertically a: flips the picture horizontally Special DivX® features For DivX® files including DMF (DivX® Media Format) features only Using the interactive menu 1 Load a disc and then select a file. ➜ The interactive menu appears on the TV screen. 2 Use 2 / 3/5/a to select a chapter. 3 Press ENTER or 3 / 8 to start playback of the selected chapter. Playing MP3 music and JPEG pictures simultaneously ■ To access the interactive menu 1 Load a disc that contains both MP3 music ■ To return to the data disc menu screen and JPEG picture data. ➜ The disc menu appears on the TV screen. 2 Select an MP3 music track. During playback, press MENU. When the interactive menu is displayed, press 7. Selecting an audio/subtitle language ■ To select an audio language During playback, press AUDIO to switch the audio language recorded on the contents. 22 En Playback Operation During playback, press SUBTITLE to switch or turn on/off the subtitle language recorded on the contents. y • For information about external subtitle files, see “Selecting DivX® external subtitle group (except Korea model)” on page 38. • For external subtitle files, the following subtitle format filename extensions are supported (note that these files are not shown within the disc menu): .srt, .sub, .ssa, .smi • The filename of the movie file has to be repeated at the beginning of the filename for the external subtitle file. • For Korean model, Korean and English external subtitle files are available. Notes • Some external subtitle files may be displayed incorrectly or not at all. • Some discs cannot be played depending on disc characteristics or recording conditions. • The number of external subtitle files that can be switched for the same movie file is limited to a maximum of ten. Notes • Some devices may not work properly. • If “Device not supported” appears on the TV screen when you connect the USB device, follow the procedure below. – Set this unit to the standby mode, and then turn it on again. – Disconnect the device when this unit is in the standby mode, then connect it again and turn on this unit. – Connect the AC adapter if the adapter is supplied with the device. If “Device not supported” appears even after you perform this procedure, the device is not usable with this unit. • If “USB current protection active. Device not supported” appears on the TV screen, the device is not usable with this unit because the power consumption of the device is too high. • This unit cannot read more than two card reader slots at once, though it can recognize up to six slots. The first slot has priority. • Do not connect devices other than USB mass storage class devices: USB chargers, USB hubs, PCs, etc. • This unit is not compatible with HDDs. Playing data files Using a USB device You can play back MP3, WMA, WMV, JPEG, and DivX® files saved on your supported USB device. Supported USB devices This unit supports USB mass storage class devices using FAT16 or FAT32 format. The supported devices are flash memories, card readers, and portable audio players. 1 Connect your USB device to the USB port of this unit (see “USB port” on page 12). ➜ “Press USB key to switch device” appears on the TV screen. 2 Press USB. • The reading time may exceed 30 seconds due to the number of files/folders. ➜ The file menu appears on the TV screen. 3 Follow the procedure in “Playing data discs (MP3/WMA/WMV/JPEG/DivX®)” on page 21. 23 En English ■ To select a subtitle language Playback Operation ■ To exit from the USB mode Press 7 to stop playback, and then press USB. ➜ This unit is set to the disc mode. ■ To disconnect the USB device After exiting from the USB mode, disconnect the USB device from this unit. Notes • Yamaha and suppliers accepts no liability for the loss of data saved on the USB devices connected to this unit. As a precaution, it is recommended that the files are made backup copies. • You cannot access the USB mode while “LOADING” is displayed on the TV screen. • If you disconnect the USB device or open the disc tray of this unit, the playback mode is automatically switched to the disc mode. • This unit can display up to 648 files. However, less than 648 files may be displayed if some files are not playable with this unit. • If the USB device is partitioned, only the first partition is displayed. • This unit can play back files of 4 GB in size or less. 24 En Setup Menu Setup Menu The bold items/parameters listed below are the default settings. The menu items, setting items, and default settings may change depending on the models. Setup page GENERAL SETUP PAGE AUDIO SETUP PAGE VIDEO SETUP PAGE Menu item Setting Item/Submenu Setting item/Parameter Page DISC LOCK LOCK, UNLOCK 28 MP3 RECORD (SETUP is displayed) 28 PROGRAM (INPUT MENU is displayed) 30 DISPLAY DIM 100%, 70%, 40% 30 OSD LANGUAGE (See “OSD LANGUAGE setting items” on page 26) 30 SCREEN SAVER ON, OFF 31 SLEEP 30, 60, 90, 120, 150 MINS, OFF 31 DIVX(R) VOD CODE (DivX® registration code is displayed) 31 ANALOG OUTPUT STEREO, LT/RT DIGITAL AUDIO DIGITAL OUTPUT OFF, ALL, PCM ONLY 32 LPCM OUTPUT 48KHz, 96KHz 32 31 HDMI AUDIO ON, OFF 32 NIGHT MODE ON, OFF 33 TV TYPE PAL (Europe, Russia, Australia, and Asia models), NTSC (U.S.A., Canada, Central and South America, and Korea models), MULTI 33 TV DISPLAY 4:3 PAN SCAN, 4:3 LETTER BOX, 16:9 33 PROGRESSIVE OFF, ON 34 PICTURE SETTING STANDARD, BRIGHT, SOFT 34 PERSONAL (BRIGHTNESS) –20 to +20 (0) PERSONAL (CONTRAST) –16 to +16 (0) PERSONAL (TINT) –9 to +9 (0) PERSONAL (COLOR) –9 to +9 (0) 34 BLACK LEVEL ON, OFF 35 CLOSED CAPTION ON (U.S.A. and Canada models), OFF (Other models) 35 COMPONENT (Europe and Russia models only) YUV, RGB 36 HDMI SETUP WIDE SCREEN FORMAT SUPERWIDE, 4:3 PILLAR BOX, OFF 36 HDMI VIDEO 480P, 576P, 720P, 1080I, 1080P, AUTO 36 HD JPEG ON, OFF 37 25 En English Menu overview Setup Menu Setup page PREFERENCE PAGE Menu item Setting Item/Submenu 37 SUBTITLE OFF (Europe, U.S.A., Canada, Central and South America, Australia, and Asia models), RUSSIAN (Russia model), KOREAN (Korea model), etc. 37 DISC MENU ENGLISH (Europe, U.S.A., Canada, Central and South America, Australia, and Asia models), RUSSIAN (Russia model), KOREAN (Korea model), etc. 37 PARENTAL 1 KID SAFE, 2 G, 3 PG, 4 PG 13, 5 PGR, 6 R, 7 NC17, 8 ADULT 37 VR LIST ORIGINAL LIST, PLAY LIST 38 DATA DISC NAV WITHOUT MENU, WITH MENU 38 DIVX SUBTITLE (except Korea model) GROUP1, GROUP2, GROUP3, GROUP4, GROUP5 38 PBC ON, OFF 39 AUTO STANDBY ON, OFF 39 PASSWORD CHANGE 40 DEFAULT RESET 40 Model Setting item Europe ENGLISH, DANSK, DEUTSCH, ESPAÑOL, FRANÇAIS, ITALIANO, NEDERLANDS, NORSK, POLSKI, PORTUGUÊS, PYCCKИЙ, SVENSKA, TÜRKÇE Russia ENGLISH, DANSK, DEUTSCH, ESPAÑOL, FRANÇAIS, ITALIANO, NEDERLANDS, NORSK, POLSKI, PORTUGUÊS, PYCCKИЙ, SVENSKA, TÜRKÇE U.S.A., Canada ENGLISH, FRANÇAIS, ESPAÑOL Australia ENGLISH, FRANÇAIS, ESPAÑOL Central and South America ENGLISH, ESPAÑOL, PORTUGUÊS Asia ENGLISH, 26 En Page ENGLISH (Europe, U.S.A., Canada, Central and South America, Australia, and Asia models), RUSSIAN (Russia model), KOREAN (Korea model), etc. ■ OSD LANGUAGE setting items Korea Setting item/Parameter AUDIO , ENGLISH Setup Menu 3 Press 5/a to highlight the desired menu item. ➜ Menu items and setting items appear. Setup is carried out on the TV, enabling you to customize this unit to suit your own particular requirements. Follow the procedures below to start the setup menu operations. VIDEO SETUP PAGE y • To return to the previous menu, press 2. • The OSDs shown in this section are the examples of Europe model. The menu items, setting items, and default setting may change depending on the models. • If the settings you have selected are not appropriate, you can reset all settings to the initial factory settings (see “Resetting the system” on page 40). • Refer to the following pages for details of the menu that requires a particular operation. 1 Press SET UP. ➜ The setup page and menu items appear on your TV. GENERAL SETUP PAGE DISC LOCK MP3 RECORD PROGRAM DISPLAY DIM OSD LANGUAGE SCREEN SAVER SLEEP DIVX(R) VOD CODE 2 Press 2 / 3 to select the desired setup page. * TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING BLACK LEVEL CLOSED CAPTION ....... COMPONENT HDMI SETUP STANDARD BRIGHT SOFT PERSONAL is only for Europe and *: [COMPONENT] Russia models. ➜ If setting items do not appear, the selected menu item has submenus. In this case, press ENTER, and then repeat step 3. 4 Press 3. 5 Press 5/a to select the desired setting item, and then press ENTER. ➜ If the parameter appears, press 2 / 3 to adjust the setting, and then press ENTER. PERSONAL PICTURE SETUP BRIGHTNESS CONTRAST TINT COLOR 0 0 0 0 6 Press SET UP to exit from the menu. 27 En English Setup menu operation Setup Menu General setup menu GENERAL SETUP PAGE DISC LOCK MP3 RECORD PROGRAM DISPLAY DIM OSD LANGUAGE SCREEN SAVER SLEEP DIVX(R) VOD CODE Locking/Unlocking the disc for viewing Not all discs are rated or coded by the manufacturer of the disc. You can prevent playback of a specific disc by locking the disc. You can lock up to 40 discs on this unit. • Select [DISC LOCK] in “GENERAL SETUP PAGE”. LOCK Select this to lock playback of the current disc. Subsequent access to a locked disc requires a six-digit password. The default password is “000 000” (see “Changing the password” on page 40). Notes • MP3 files created by this unit are restricted to your private enjoyment only. Unauthorized use of copyrighted recordings can be copyright infringement. • Yamaha and suppliers accepts no liability for the loss of data saved on the USB devices connected to this unit. As a precaution, it is recommended that the files are made backup copies. • Discs incompatible with CDDA standard are not guaranteed to function. • Copy protected music discs incompatible with CDDA standard are not recordable. • Tracks protected by SCMS (Serial Copy Management System) are not recordable. • If “USB current protection active. Device not supported” appears on the TV screen, the device is not usable with this unit because the power consumption of the device is too high. • “Device not supported” or “USB current protection active. Device not supported” appears on the TV screen when you connect the USB device, this unit does not support the USB device. In this case, use a different USB device. • During recording, do not disconnect your USB device or set this unit to the standby mode. y About the USB devices supported by this unit, refer to “Supported USB devices” on page 23. UNLOCK 1 Connect your USB device to the USB port Select this to unlock the disc and allow future playback. 2 Load a music CD (see “Basic operation” of this unit (see “USB port” on page 12). on page 17). Recording CD tracks onto your USB device 3 In “GENERAL SETUP PAGE”, press You can record CD tracks onto your USB device connected to this unit. The tracks are recorded in MP3 format. 4 Press ENTER. 28 En 5/a to highlight [MP3 RECORD], and then press 3 to select [SETUP]. Setup Menu • highlight [SPEED], and then press ENTER repeatedly to select the desired setting. MP3 RECORD OPTION TRACK SPEED Normal Bitrate 128 kbps SUMMARY Selected Total Time Start 0 Track 01 Track 02 Track 03 Track 04 Track 05 Track 06 Track 07 03:34 06:42 03:42 03:09 02:50 00:34 05:15 00:00 Exit Select All • The tracks may be displayed on more than one page in “TRACK”. In this case, press 5/a to select or , and then press ENTER to scroll through pages. You can also select or deselect all the tracks by selecting [Select All] or [Deselect All]. 9 Press 2 to return to [SPEED]. 10 Press 5/a to highlight [Start], and then press ENTER. • To cancel the recording, highlight [CANCEL], and then press ENTER. Deselect All Normal Select this to record at normal speed. Fast Notes Select this to record at about 2x speed. • Recording cannot be started in the following conditions: – the connected USB device is not supported – no USB device is connected – when “USB current protection active. Device not supported” is shown on the TV screen • During recording, do not press any keys other than ENTER. y When you select [Normal], you can enjoy playback while the recording. 6 Press 5/a to highlight [Bitrate], and then press ENTER repeatedly to select the desired bit rate. 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps 11 When the recording is completed, press 2 / 3/5/a to highlight [Exit] and then press ENTER to exit from “MP3 RECORD” menu. Select a bit rate for the music data. y Generally, the higher the bit rate, the better the sound quality. However, higher bit rates use more space on a device. 7 Press 3. y The created file is named as “TRACKxxx”. In “xxx”, numbers from 001 to 999 are inserted in order. 8 Press 5/a to highlight the desired track in “TRACK”, and then press ENTER. Repeat this step as necessary to select the other tracks. ➜ The number of selected tracks and total time are shown in “SUMMARY”. 29 En English 5 In “MP3 RECORD”, press 5/a to Setup Menu 5 Repeat steps 3-4 to input another track/ Note chapter number. You cannot edit the files on your USB device connected to this unit by using this unit (for example, deleting or renaming the files). ■ To remove a track 6 Use 2 / 3/5/a to select the track you want to remove. Programming disc tracks (except MP3/WMA/WMV/JPEG/ DivX®) You can play back the contents of a disc in the desired order by programming the tracks to be played. You can store up to 20 tracks per disc with a maximum of ten discs. 7 Press ENTER to remove this track from the program menu. ■ To start program playback 8 Use 2 / 3/5/a to highlight [START] on the program menu, and then press ENTER. ➜ Playback starts for the selected tracks in the programmed sequence. 1 In “GENERAL SETUP PAGE”, press 5/a to highlight [PROGRAM], and then press 3 to select [INPUT MENU]. ■ To exit from program playback 9 Use 2 / 3/5/a to highlight [EXIT] on 2 Press ENTER. the program menu, and then press ENTER. ➜ The input menu appears on the TV screen. You can select different levels of brightness for the front panel display. PROGRAM: TRACK (01-17) 1 2 3 4 5 6 __ 04 10 __ __ __ 7 8 9 10 EXIT Dimming the front panel display • __ __ __ __ START Select [DISPLAY DIM] in “GENERAL SETUP PAGE”. 100% NEXT Select this for full brightness. ■ To input your favorite tracks/ chapters 70% 3 Use the numeric buttons (0-9) to enter a 40% valid track/chapter number. 4 Use 2 / 3/5/a to move the cursor to the next position. • If the track/chapter number is more than ten, press 33l to move to the next page, and then proceed with programming. • 30 En OR Use 2 / 3/5/a to highlight [NEXT] on the program menu, and then press ENTER. Select this for medium brightness. Select this for dimming display. OSD language This menu contains various options for the onscreen display (OSD) language. For details, see “Setting the OSD Language” on page 15. Setup Menu This function is used to turn on or off the screen saver. • Select [SCREEN SAVER] in “GENERAL SETUP PAGE”. 2 Press ENTER to exit. y To purchase or rent the videos from DivX® VOD service at https://vod.divx.com/, use the registration code and download the video onto a CD-R for playback on this unit. ON Select this to turn off the TV screen when disc playback is stopped or paused for more than 15 minutes. OFF Select this to disable the screen saver function. Notes • All of the downloaded videos from DivX® VOD can only be played back on this unit. • For DivX®, the time search feature is not available. Setting the sleep timer Audio setup menu This feature automatically sets this unit to the standby mode after a certain elapsed period. • Select [SLEEP] in “GENERAL SETUP PAGE”. AUDIO SETUP PAGE ANALOG OUTPUT DIGITAL AUDIO HDMI AUDIO NIGHT MODE 30 MINS, 60 MINS, 90 MINS, 120 MINS, 150 MINS Select one of them to set the sleep timer function. OFF Select this to cancel the sleep timer function. y The sleep timer setting can also be deactivated if this unit is set to the standby mode. Displaying the DivX® VOD registration code Yamaha provides you with a DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit https://vod.divx.com/. 1 In “GENERAL SETUP PAGE”, press 5/a to highlight [DIVX(R) VOD CODE], and then press 3. ➜ The registration code appears. Setting the analog output Set the analog output to match the playback capability of this unit. • Select [ANALOG OUTPUT] in “AUDIO SETUP PAGE”. STEREO Select this to change channel output to stereo, which only delivers sound from the two front speakers. LT/RT Select this if this unit is connected to a Dolby Pro Logic decoder. 31 En English Setting the screen saver Setup Menu 96KHz Setting the digital output Select this to play back discs recorded at the sampling rate of 96 kHz. If the 96 kHz disc is copy protected, the digital output is automatically converted to the sampling rate of 48 kHz. 48 kHz PCM data streams are output at 48 kHz. The [DIGITAL AUDIO] options are: [DIGITAL OUTPUT] and [LPCM OUTPUT]. 1 In “AUDIO SETUP PAGE”, press 5/a to highlight [DIGITAL AUDIO], and then press 3. 2 Press 5/a to highlight an option. 4 Press 5/a to select a setting, and then press ENTER. 3 Press 3. DIGITAL OUTPUT Turning the HDMI audio on/off Set the digital output according to your optional audio component connections. When you connect this unit to an HDMI compatible component via the HDMI jack, select to turn on or off the HDMI audio output. OFF Select this to turn off the digital output. ALL • Select [HDMI AUDIO] in “AUDIO SETUP PAGE”. Select this if you have connected the digital audio output jack to a multi-channel decoder/ receiver. ON PCM ONLY OFF Select this only if your receiver is not capable of decoding multi-channel audio signals. Select this to turn on the HDMI audio output. Select this to turn off the HDMI audio output. y Notes • Even if “ALL” is selected, this unit converts MPEG audio into 2 channel PCM and then outputs to the connected component. • When “PCM ONLY“ is selected, DTS digital signal is muted. • If you are not using the HDMI audio output, set this to [OFF]. • If the monitor/receiver connected to this unit using HDMI does not support HDMI audio signal input, set this to [OFF]. • When audio signals are being output by HDMIcompatible components, digital signals output at the coaxial jack of this unit are muted. • When [DIGITAL OUTPUT] is set to [OFF] on this unit, HDMI audio signal is not output even if [HDMI AUDIO] is set to [ON] and an HDMI connection is established between the monitor and receiver. • When [DIGITAL OUTPUT] is set to [ALL] on this unit, PCM signals are still output if the monitor and receiver only support the PCM format. However, the HDMI audio signal is muted when audio format plays back the DTS source. LPCM OUTPUT Select this if you have connected this unit to a PCM-compatible receiver via a digital jack, such as the coaxial jack. In this case, you may need to adjust [LPCM OUTPUT]. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. 48KHz Select this to play back discs recorded at the sampling rate of 48 kHz. All 96 kHz PCM data streams (if available) are converted to the sampling rate of 48 kHz. 32 En Setup Menu This unit can output the following audio signals using HDMI: 32/44.1/48 kHz, 2ch linear PCM signals and bitstream signals (Dolby Digital and DTS). TV type This menu contains the options for selecting the color system that matches your TV. For details, see “Setting a color system for your TV” on page 14. Turning the night mode on/off In the night mode, high volume output is softened and low volume output is brought upward to an audible level. It is useful when you want to watch your favorite action movie without disturbing others at night. Setting the TV display • • Select [NIGHT MODE] in “AUDIO SETUP PAGE”. Set the aspect ratio of this unit to match your TV. The format you select must be available on the disc. Otherwise, the TV display setting will not affect the picture during playback. Select [TV DISPLAY] in “VIDEO SETUP PAGE”. ON 4:3 PAN SCAN Select this to level out the volume. This feature is only available for movies with the Dolby Digital mode. When you select this setting, invalidate the dynamic range compression (DRC) of the connected component. Select this if the aspect ratio of your TV is 4:3 and you want both sides of the picture to be trimmed or formatted to fit your TV screen. OFF Select this when you want to enjoy the full dynamic range of surround sound. 4:3 LETTER BOX Select this if the aspect ratio of your TV is 4:3. In this case, a wide picture with black bands on the upper and lower portions of the TV screen are displayed. 16:9 Select this if you have a widescreen TV. Video setup menu ■ The relationship between the setting of this unit and the TV display When the aspect ratio of your TV is 4:3: VIDEO SETUP PAGE * TV TYPE TV DISPLAY PROGRESSIVE PICTURE SETTING BLACK LEVEL CLOSED CAPTION ....... COMPONENT HDMI SETUP is only for Europe and *: [COMPONENT] Russia models. Setting Playback disc 16:9 TV display *1 4:3 PAN SCAN 4:3 16:9 4:3 LETTER BOX 4:3 33 En English y Setup Menu When the aspect ratio of your TV is 16:9 (widescreen): Setting Playback disc TV display 16:9 16:9 4:3 *2 *1: If the disc is not assigned to playback in panscan, it is played in letterbox. *2: The side of the picture may be stretched depending on the TV. In this case, check the screen size and aspect ratio of your TV. Turning the progressive scan function on/off Notes on activating progressive scan: • Ensure that your TV is equipped with progressive scan. • Connect using a component video cable. • When making HDMI connections, you cannot select [PROGRESSIVE]. • (Europe and Russia models only) When [COMPONENT] is set to [RGB] (see page 36), you cannot select [PROGRESSIVE]. • You can turn off the progressive scan without using the setup mode if no picture is displayed. See “No picture is displayed when you do not use progressive scan connections (using the component video jacks)” in “Troubleshooting” on page 43. Adjusting picture settings This feature is only available if you have connected this unit to a progressive scan TV through the component video jacks (see “Component video jacks <A>” on page 10). • Select [PROGRESSIVE] in “VIDEO SETUP PAGE”. This unit comes with three predefined sets of picture color settings and one personal setting that you can define yourself. OFF STANDARD Select this to disable the progressive scan function. Select this for the standard picture setting. ON Select this to make the TV picture brighter. Select this to enable the progressive scan function. SOFT 1 In “VIDEO SETUP PAGE”, press 5/a to highlight [PICTURE SETTING], and then press 3. BRIGHT Select this to make the TV picture softer. PERSONAL Select this to personalize your picture color by adjusting the brightness, contrast, tint and color (saturation). 2 Press 5/a to select a setting, and then press ENTER. 3 If you select [PERSONAL] in step 1, proceed to steps 4-7. 34 En Setup Menu PERSONAL PICTURE SETUP BRIGHTNESS CONTRAST TINT COLOR 0 0 0 0 Turning the black level on/off When [TV TYPE] is set to [NTSC] (see page 14), this menu is effective for improving the visibility of the black color in the dark area on the screen. The black level setting has no effect if [TV TYPE] is set to [PAL]. • Select [BLACK LEVEL] in “VIDEO SETUP PAGE”. ON 4 Press 5/a to select one of the following options. Select this to improve the visibility of the black color. OFF Select this for the standard black level setting. BRIGHTNESS Adjust the brightness of the picture. Zero (0) is the average brightness setting value. CONTRAST Adjust the contrast of the picture. Zero (0) is the average contrast setting value. TINT Adjust the balance of red and green of the picture. Zero (0) is the average tint setting value. COLOR Adjust the color level of the picture. Zero (0) is the average color setting value. 5 Press 2 / 3 to adjust the setting that best suits your personal preference. 6 Repeat steps 4-5 to adjust other color features. 7 Press ENTER. Note This function is only available for composite video / S-video output. Turning the closed caption on/off Closed captions are data hidden in the video signals of specific discs and are invisible without the use of a special decoder. The difference between subtitles and captions is that subtitles are intended for hearing persons and captions are for the hearing impaired. Subtitles rarely show all of the audio. For example, captions show sound effects (e.g., “phone ringing”, “footsteps”), while subtitles do not. Before you select this function, ensure that the disc contains closed caption information and your TV also supports this function. • Select [CLOSED CAPTION] in “VIDEO SETUP PAGE”. ON Select this to enable the closed caption function. OFF Select this to disable the closed caption function. 35 En English ➜ The “PERSONAL PICTURE SETUP” menu appears. Setup Menu Note This function is only available for NTSC video format and composite video / S-video output. SUPERWIDE Select to display a 4:3 image on the 16:9 screen with non-linear stretching (center position of screen is stretched less than the sides). 4:3 PILLAR BOX Switching YUV/RGB (Europe and Russia models only) This setting allows you to toggle the output of the video signal between YUV (on VIDEO OUT - COMPONENT) and RGB (on SCART). • Select [COMPONENT] in “VIDEO SETUP PAGE”. YUV Select this for the component video connection. RGB Select to display a 4:3 image on the 16:9 screen without stretching. When playing a disc recorded in the 16:9 image, the image is displayed in its original aspect ratio (16:9) without pillar boxes. OFF No aspect ratio adjustment is made when this option is selected. Note When the video signal is 480p or 576p, you cannot select [WIDE SCREEN FORMAT], and no aspect ratio adjustment is made even if [SUPERWIDE] or [4:3 PILLAR BOX] is selected. Select this for SCART connection. HDMI VIDEO Setting the HDMI video When you connect this unit to an HDMI compatible component via the HDMI jack, select the following video output settings depending on the connected component. 1 In “VIDEO SETUP PAGE”, press 5/a to highlight [HDMI SETUP], and then press 3. Set the resolution depending on the monitor you are using. This unit is compatible with the following video formats: 480p/60Hz, 576p/50Hz, 720p/50Hz, 60Hz, 1080i/50Hz, 60Hz, and 1080p/50Hz, 60Hz 480P 480 progressive-scan video 576P 576 progressive-scan video 2 Press 5/a to highlight an option. 720P 3 Press 3 to enter a submenu. 720 progressive-scan video WIDE SCREEN FORMAT 1080I Set the aspect ratio of the projected images on the screen. This feature is only available when making HDMI connections and [TV DISPLAY] is set to [16:9] (see page 33) when playing back 4:3 image. 36 En 1080 interlaced video 1080P 1080 progressive-scan video AUTO The resolution is automatically selected to match the monitor you are using. Setup Menu 1 Press OPEN/CLOSE ( ) on the front panel to open the disc tray. 2 Press 2. 3 Press SUBTITLE. • You cannot set [TV TYPE], [PROGRESSIVE], and [COMPONENT] (Europe and Russia models) when making HDMI connections. • When disconnecting the HDMI cable, the setting of [TV TYPE] may be changed. If the component video, S-video, or composite video signal is not output correctly, see “Completely distorted picture, black/white picture, or no picture” in “Troubleshooting” on page 43 to set the correct TV type again. HD JPEG This unit can display High-Definition JPEG images when connecting to an HDMI component using HDMI cable. ON Preference setup menu Press 7 twice to stop playback (if necessary) before pressing SET UP. PREFERENCE PAGE * AUDIO SUBTITLE DISC MENU PARENTAL VR LIST DATA DISC NAV ....... DIVX SUBTITLE PBC SUBTITLE] is available for the *: [DIVX models other than Korea model. Audio, subtitle and disc menu These menus contain various language options for the audio, subtitles, and disc menus recorded on the DVD-Video. For details, see “Setting the audio, subtitle, and disc menu languages (DVD-Video only)” on page 16. Displays JPEG pictures with high quality. OFF Displays JPEG pictures with standard quality. Notes • You can select [HD JPEG] when the HDMI video signals with 720p, 1080i, and 1080p are output. • You cannot select [HDMI SETUP] when JPEG (including HD JPEG) pictures are displayed. Restricting playback with parental control Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You can prohibit playback of certain discs that are not suitable for your children or play certain discs in alternative scenes. 37 En English Notes • For the settings other than [AUTO], images may not be displayed properly if a resolution output setting is not supported by the HDMI component you are using. In that case, follow the steps below to return to [AUTO]. Setup Menu 1 In “PREFERENCE PAGE”, press 5/a to highlight [PARENTAL], and then press 3. ORIGINAL LIST Select this to play the originally recorded titles on the disc. PLAY LIST PREFERENCE PAGE AUDIO SUBTITLE DISC MENU PARENTAL VR LIST DATA DISC NAV ....... DIVX SUBTITLE PBC * 1 KID SAFE 2G 3 PG 4 PG 13 5 PGR 6R 7 NC17 8 ADULT SUBTITLE] is available for the *: [DIVX models other than Korea model. Select this to play the edited version of the disc. This feature is only available when a play list has been created. 2 Press 5/a to highlight a setting, and then press ENTER. ■ To play back a disc in VR format 3 Press SET UP to close the setup menu. 4 Press 3 / 8 to begin to play back the disc with the setting you selected. 2 Press 5/a to highlight a rating level for the inserted disc, and then press ENTER. • To disable parental controls and have all discs play, select [8 ADULT]. 3 Use the numeric buttons (0-9) to enter the six-digit password (see “Changing the password” on page 40). ➜ DVD discs that are rated above the level you selected do not play unless you enter your six-digit password. Note Some DVD discs are not encoded with a rating though the movie rating may be printed on the disc cover. The rating level feature does not work for such discs. Selecting playback of VR format There are two ways to play back a disc in VR (Video Recording) format: ORIGINAL and PLAY LIST. 1 In “PREFERENCE PAGE”, press 5/a to highlight [VR LIST], and then press 3. 38 En Selecting the data disc menu Data disc navigator can be set only if the disc was recorded with a menu. It allows you to display folder menus when playing back a disc with folder structure. • Select [DATA DISC NAV] in “PREFERENCE PAGE”. WITHOUT MENU Select this to display all the files contained in the data disc. WITH MENU Select this to display only the folder menu of the data disc. Selecting DivX® external subtitle group (except Korea model) The font sets listed below are available for DivX® external subtitle files. This setting allows you to see the proper font set on-screen to match the subtitle file. • Select [DIVX SUBTITLE] in “PREFERENCE PAGE”. Setup Menu Albanian (sq), Basque (eu), Catalan (ca), Danish (da), Dutch (nl), English (en), Faroese (fo), Finnish (fi), French (fr), German (de), Icelandic (is), Irish (ga), Italian (it), Norwegian (no), Portuguese (pt), Rhaeto-Romanic (rm), Scottish (gd), Spanish (es), Swedish (sv) Selecting the PBC (playback control) function You can set playback control (PBC) to on or off. This function is available only on Video CD 2.0 with the playback control (PBC) feature. • GROUP2: Albanian (sq), Croatian (hr), Czech (cs), Hungarian (hu), Polish (pl), Romanian (ro), Slovak (sk), Slovenian (sl) GROUP3: Bulgarian (bg), Byelorussian (be), Macedonian (mk), Russian (ru), Serbian (sr), Ukrainian (uk) GROUP4: Hebrew (iw), Yiddish (ji) GROUP5: Select [PBC] in “PREFERENCE PAGE”. ON Select this to display a disc menu. OFF Select this not to display a disc menu. Playback starts from the beginning of a disc. y You can also use the MENU button on the remote control to turn on or off the playback control (PBC) function (see “Using the playback control (PBC) menu” on page 20). Turkish (tr) Notes • Some external subtitle files may be displayed incorrectly or not at all. • Some discs cannot be played depending on disc characteristics or recording conditions. • The number of external subtitle files that can be switched for the same movie file is limited to a maximum of ten. y • For external subtitle files, the following subtitle format filename extensions are supported (note that these files are not shown within the disc menu): .srt, .sub, .ssa, .smi • The filename of the movie file has to be repeated at the beginning of the filename for the external subtitle file. Setting the auto standby function You can set auto standby function to on or off. • Select [AUTO STANDBY] in “PREFERENCE PAGE”. ON Select this to set this unit to the standby mode automatically when disc playback is stopped or paused for more than 30 minutes. OFF Select this to disable the auto standby function. 39 En English GROUP1: Setup Menu Changing the password The same password is used for both parental control and disc lock. Enter your six-digit password when prompted on the screen. The default password is 000 000. 1 In “PREFERENCE PAGE”, press 5/a to highlight [PASSWORD], and then press 3 to select [CHANGE]. 4 Enter the new six-digit password. 5 Enter the new six-digit password again to confirm the password. 6 Press ENTER to confirm your new password. ➜ The new six-digit password is now valid. Resetting the system You can reset all options and your personal settings to the initial factory settings, excluding [PASSWORD], [PARENTAL], and [DISC LOCK]. PREFERENCE PAGE PARENTAL VR LIST DATA DISC NAV ....... DIVX SUBTITLE PBC AUTO STANDBY PASSWORD DEFAULT 1 In “PREFERENCE PAGE”, press 5/a to * CHANGE 2 Press ENTER. SUBTITLE] is available for the *: [DIVX models other than Korea model. 2 Press ENTER to enter the “Password Change Page”. OLD PASSWORD NEW PASSWORD CONFIRM PWD OK 3 Use the numeric buttons (0-9) to enter your old six-digit password. • When doing this for the first time, enter “000 000”. • If you forget your old six-digit password, enter “000 000”. 40 En highlight [DEFAULT], and then press 3 to select [RESET]. ➜ All settings are reset to the initial factory settings. Language Codes Language Codes Abkhazian 6566 Gaelic 7168 Macedonian 7775 Sardinian Afar 6565 Gallegan 7176 Malagasy 7771 Scottish Gaelic 8367 7168 Afrikaans 6570 Georgian 7565 Malay 7783 Serbian 8382 Albanian 8381 German 6869 Malayalam 7776 Shona 8378 Amharic 6577 Gikuyu 7573 Maltese 7784 Sindhi 8368 Arabic 6582 Greek 6976 Manx 7186 Sinhalese 8373 Armenian 7289 Guarani 7178 Maori 7773 Slovak 8375 Assamese 6583 Gujarati 7185 Marathi 7782 Slovenian 8376 Avestan 6569 Hausa 7265 Marshallese 7772 Somali 8379 Aymara 6589 Hebrew 7269 Moldavian 7779 Sotho, Southem 8384 Azerbaijani 6590 Herero 7290 Mongolian 7778 South Ndebele 7882 Bashkir 6665 Hindi 7273 Nauru 7865 Spanish 6983 Basque 6985 Hiri Motu 7279 Navaho 7886 Sundanese 8385 Belarusian 6669 Hungarian 7285 Navajo 7886 Swahili 8387 Bengali 6678 Icelandic 7383 Ndebele, North 7868 Swati 8383 Bihari 6672 Ido 7379 Ndebele, South 7882 Swedish 8386 7368 8476 Bislama 6673 Indonesian Ndonga 7871 Tagalog Bokmål, Norwegian 7866 Interlingua (International) 7365 Nepali 7869 Tahitian 8489 Bosnian 6683 Interlingue 7369 Northern Sami 8369 Tajik 8471 Breton 6682 Inuktitut 7385 North Ndebele 7868 Tamil 8465 Bulgarian 6671 Inupiaq 7375 Norwegian 7879 Tatar 8484 Burmese 7789 Irish 7165 Norwegian Bokmål 7866 Telugu 8469 Castilian 6983 Italian 7384 Norwegian Nynorsk 7878 Thai 8472 Catalan 6765 Japanese 7465 Nyanja 7889 Tibetan 6679 Chamorro 6772 Javanese 7486 Nynorsk, Norwegian 7878 Tigrinya 8473 Chechen 6769 Kalaallisut 7576 Occitan (post 1500) 7967 Tonga (Tonga Islands) 8479 Chewa 7889 Kannada 7578 Old Bulgarian 6785 Tsong 8483 Chichewa 7889 Kashmiri 7583 Old Church Slavonic 6785 Tswana 8478 Chinese 9072 Kazakh 7575 Old Slavonic 6785 Turkish 8482 Chuang 9065 Khmer 7577 Oriya 7982 Turkmen 8475 Church Slavic 6785 Kikuyu 7573 Oromo 7977 Twi 8487 Church Slavonic 6785 Kinyarwanda 8287 Ossetian 7983 Uighur 8571 Chuvash 6786 Kirghiz 7589 Ossetic 7983 Ukrainian 8575 Cornish 7587 Komi 7586 Pali 8073 Urdu 8582 Corsican 6779 Korean 7579 Panjabi 8065 Uzbek 8590 Croatian 7282 Kuanyama 7574 Persian 7065 Vietnamese 8673 Czech 6783 Kurdish 7585 Polish 8076 Volapük 8679 Danish 6865 Kwanyama 7574 Portuguese 8084 Walloon 8765 Dutch 7876 Lao 7679 Provençal 7967 Welsh 6789 Dzongkha 6890 Latin 7665 Pushto 8083 Wolof 8779 English 6978 Latvian 7686 Quechua 8185 Xhosa 8872 Esperanto 6979 Letzeburgesch 7666 Raeto-Romance 8277 Yiddish 8973 8979 Estonian 6984 Limburgan 7673 Romanian 8279 Yoruba Faroese 7079 Limburger 7673 Rundi 8278 Zhuang 9065 Fijian 7074 Limburgish 7673 Russian 8285 Zulu 9085 Finnish 7073 Lingala 7678 Samoan 8377 French 7082 Lithuanian 7684 Sango 8371 Frisian 7089 Luxembourgish 7666 Sanskrit 8365 41 En English These codes can be used to select other languages. This does not affect the options in “AUDIO”, “SUBTITLE”, or “DISC MENU”. Troubleshooting Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. Problem No power Solution Connect the AC power cable properly. Press STANDBY/ON on the front panel to turn on the power. This unit cannot read CD or DVD Use a commonly available CD/DVD lens cleaner to clean the lens before sending this unit for repair. “NO DISC” appears in the front panel display Check that the disc is placed in the disc tray correctly. “UN DISC” appears in the front panel display The disc being loaded is not supported by this unit. Check the disc type (see “Playable disc formats” on page 4). Disc or file does not play The CD-R/RW, DVD+R/RW/R DL, and DVD-R/RW/R DL must be finalized. Check that the disc label is facing up. Check whether the disc is defective by trying another disc. If you have recorded a JPEG, MP3, or WMA disc yourself, check that your disc contains at least ten JPEG picture files or five MP3/WMA music tracks. Check the region code (see “Region codes” on page 3). For MP3/WMA, check that the sampling rate and bit rate are compatible. For JPEG, check that the resolution is compatible (see “Specifications” on page 48). For WMA/WMV, check that the file is not protected by DRM (Digital Rights Management). For WMV, check that the file has been encoded by WMV9. For WMV, check that the file is not Advanced Profile. For WMV, check that the resolution of the file is 720 x 480/720 x 576 pixels or less. No picture Refer to the manual supplied with your TV to select the video input channel correctly. Change the TV channel until you see the DVD screen. Turn on your TV. Check the video connection. No picture is displayed when you make HDMI connections (using the HDMI jacks) 42 En Follow the steps below to change the [HDMI VIDEO] to [AUTO]. 1. Press OPEN/CLOSE ( ) on the front panel or press and hold 7 on the remote control to open the disc tray. 2. Press 2 on the remote control. 3. Press SUBTITLE on the remote control. Troubleshooting Solution Follow the steps below to turn off the progressive scan. 1. Press OPEN/CLOSE ( ) on the front panel or press and hold 7 on the remote control to open the disc tray. 2. Press 2 on the remote control. 3. Press ZOOM on the remote control to deactivate the progressive scan. Completely distorted picture, black/white picture, or no picture Check that the disc is compatible with this unit (see “Playable disc formats” on page 4). Distorted picture Occasionally, a small amount of picture distortion may appear depending on the disc being played back. This is not a malfunction. Check that the TV type of this unit is set to match that of the disc and your TV (see “Setting a color system for your TV” on page 14). Follow the steps below to change the setting of [TV TYPE]. 1. Press OPEN/CLOSE ( ) on the front panel or press and hold 7 on the remote control to open the disc tray. 2. Press 3 on the remote control. 3. Press AUDIO on the remote control. Check the video connection. Picture freezes momentarily during playback Check the disc for fingerprints/scratches and clean it with a soft cloth wiping from center to edge. For WMV/DivX®, lowering the bit rate may improve the problem. HD JPEG pictures cannot be displayed Check that [HD JPEG] is set to [ON] (see page 37). The disc reading time may exceed 30 seconds. MP3 music and HD JPEG pictures cannot be played simultaneously. The screen size looks unnatural, or the caption is displayed only partially on the TV monitor or is not displayed at all Check that the TV setting of this unit matches the screen size of your TV (see “Setting the TV display” on page 33). No sound or distorted sound Adjust the volume. Change the screen size and the aspect ratio of your TV. Check that the speakers are connected correctly. Check the audio connection. For MP3/WMA, check that the sampling rate and bit rate are compatible with this unit (see “Specifications” on page 48). For WMV/DivX®, record the file onto your USB device at a lower bit rate. No audio at digital output Check the digital connections. If you are playing a DTS source, check that your receiver can decode DTS, and that [DIGITAL OUTPUT] is set to [ALL] (see page 32). Check that the audio format of the selected audio language matches your receiver capabilities. No sound during DivX® movie playback The audio code may not be supported by this unit. This unit does not respond to the remote control Aim the remote control directly at the remote control sensor on the front panel. Reduce the distance of the remote control from this unit. Replace the batteries in the remote control. Reinsert the batteries with their polarities (+/– signs) as indicated. 43 En English Problem No picture is displayed when you do not use progressive scan connections (using the component video jacks) Troubleshooting Problem Solution Buttons do not work To completely reset this unit, unplug the AC cord from the AC outlet for 5-10 seconds, plug the AC cord to the AC outlet again, and then turn on this unit. This unit does not respond to some operating commands during playback Some operations may not be permitted by the disc. Refer to the instructions of the disc jacket. Menu items cannot be selected Press 7 twice on the remote control before selecting the setup menu. Depending on the disc availability, some menu items cannot be selected. Your USB device cannot be recognized Check that your USB device is connected correctly. Some devices may not be used even if they are USB mass storage class devices. Set this unit to the standby mode, and then turn it on again. Disconnect your USB device when this unit is in the standby mode, then connect it again and turn on this unit. Connect the AC adapter if the adapter is supplied with your USB device. If “Device not supported” appears on the TV screen, check whether your USB device is supported by this unit (see “Supported USB devices” on page 23). If “USB current protection active. Device not supported” appears on the TV screen, your USB device is not usable with this unit (see “Supported USB devices” on page 23). This unit does not record CD tracks onto your USB device Check that your USB device is connected correctly. Check that your USB device is compatible with this unit. Tracks protected by SCMS (Serial Copy Management System) are not recordable. Copy protected music discs incompatible with CDDA standard are not recordable. 44 En Troubleshooting Solution If “Max files reached” appears on the TV screen, delete any files you do not need or create a new folder and then move some files to the created folder so that the number of files on a root directory in your USB device is reduced. This unit can record up to 648 files on each root directory. In case the above message appears, press ENTER to cancel the recording. If “USB full” appears on the TV screen, delete any files you do not need so that there is enough space in your USB device. In case the above message appears, press ENTER to cancel the recording. If “Max tracks reached” appears on the TV screen, rename “TRACK999” by using PC, etc. or create a new folder and then move the file to the created folder. In case the above message appears, press ENTER to cancel the recording. If “USB device error” appears on the TV screen, check the connection between this unit and the USB device. In case the above message appears, press ENTER to cancel the recording. If “Disc error” appears on the TV screen, check the disc for fingerprints/scratches and clean it with a soft cloth wiping from center to edge. In case the above message appears, press ENTER to cancel the recording. If “Copy protected” appears on the TV screen, check that the track is not protected by SCMS (Serial Copy Management System). Tracks protected by SCMS are not recordable. In case the above message appears, press ENTER to cancel the recording. The MP3 file recorded on your USB device by using “MP3 RECORD” does not play or stops during playback If the recording has been canceled, playback stops at the canceled point. Try recording again. The sound of recorded music on your USB device is lowquality, skips, or contains unexpected noise Check the CD (e.g., sound quality, noise, or fingerprints/scratches). If “USB full”, “USB device error”, or “Disc error” has appeared on the TV screen during the recording, created files cannot be played. Refer to “This unit stops recording CD tracks onto your USB device” to solve the problem and then try recording again. 45 En English Problem This unit stops recording CD tracks onto your USB device Glossary Glossary ■ Analog Sound that has not been converted into numerical values. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. ■ Aspect ratio The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs is 4:3, and that of wide-screens is 16:9. ■ Audio output jacks Jacks on the back of the DVD player that send audio to another system (TV, Stereo, etc.). ■ Bit rate The amount of data used to hold a given length of music, measured in kilobits per seconds, or kbps. Or, the speed at which you record. Generally, the higher the bit rate, or the higher the recording speed, the better the sound quality. However, higher bit rates use more space on a disc. ■ Chapter Sections of a picture or a music piece on a DVD that are smaller than titles. A title is composed of several chapters. Each chapter is assigned a chapter number enabling you to locate the chapter you want. ■ Component video output jacks Jacks on the back of the DVD player that send highquality video to a TV that has component video input jacks (R/G/B, Y/PB/PR, etc.). ■ Disc menu A screen display prepared for allowing selection of images, sounds, subtitles, multi-angles, etc. recorded on a DVD. ■ Digital Sound that has been converted into numerical values. Digital sound is available when you use the digital audio output jacks. These jacks send audio through multiple channels, instead of just two channels as analog does. ■ DivX® DivX® is a popular media technology created by DivX, Inc. DivX® media files contain highly compressed video with high visual quality that maintains a relatively small file size. DivX® files can also include advanced media features like menus, subtitles, and alternate audio tracks. Many DivX® media files are available for download online, and you can create your own using your personal content and easy-to-use tools from DivX.com. 46 En ■ DivX® Ultra DivX® Ultra Certified products provide enhanced playback of advanced media features supported by the DivX® Media Format. Key features include interactive video menus, subtitles, alternate audio tracks, video tags, and chapter points. ■ DMF (DivX® Media Format) The DivX® Media Format supports advanced media features, adding controls for an interactive media experience: interactive video menus, chapter points, multi-language subtitles, and alternate audio tracks. ■ Dolby Digital A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio (front left and right, surround left and right, center and subwoofer). ■ DTS Digital Theatre Systems. This is a surround sound system, but it is different from Dolby Digital. The formats were developed by different companies. ■ HDCP HDCP (High-bandwidth Digital Content Protection) developed by Intel corporation, is a method to encrypt digital video and audio data for purpose of content protection. For further information on HDCP, visit the HDCP website at “www.digital-cp.com”. ■ HD JPEG HD (High-Definition) JPEG provides images in their enhanced resolution via HDMI connection. ■ HDMI HDMI (High-Definition Multimedia Interface) is the first industry-supported, uncompressed, all-digital A/V (audio/video) interface. Providing an interface between any A/V source (such as a set-top box or A/V receiver) and an audio/video monitor (such as a digital televisionDTV), HDMI supports standard, enhanced or highdefinition video as well as multi-channel digital audio using a single cable. HDMI transmits all ATSC (Advanced Television Systems Committee) HDTV standards and supports 8-channel digital audio, with bandwidth extra to accommodate future enhancements and requirements. When used in combination with HDCP (Highbandwidth Digital Content Protection), HDMI provides a secure audio/video interface that meets the security requirements of content providers and system operations. For further information on HDMI, visit the HDMI website at “www.hdmi.org/”. Glossary ■ JPEG A very common digital still picture format. A stillpicture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. ■ MP3 A file format with a sound data compression system. “MP3” is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. By using MP3 format, one CD-R or CD-RW can contain about ten times as much data as a regular CD can. ■ Parental control A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback will be prohibited if the software’s level is higher than the user-set level. ■ PCM (Pulse Code Modulation) A system for converting analog sound signals to digital signals for later processing, with no data compression used in conversion. ■ Region code A system for allowing discs to be played back only in the region designated beforehand. This unit will only play discs that have compatible region codes. You can find the region code of your unit by looking on the product label. Some discs are compatible with more than one region (or ALL regions). ■ S-video Produces a clear picture by sending separate signals for the luminance and the color. You can use S-video only if your TV has S-video input jack. ■ Surround A system for creating realistic three dimensional sound fields full of realism by arranging multiple speakers around the listener. ■ Title The longest section of a picture or music feature on DVD, music, etc., in video software, or the entire album in audio software. Each title is assigned a title number enabling you to locate the title you want. ■ Video output jack Jack on the back of the DVD player that sends video to a TV. ■ VR (Video Recording) format A format which enables you to create a DVD disc that can be extensively re-edited. ■ Playback control (PBC) Refers to the signal recorded on video CDs or SVCDs for controlling reproduction. By using menu screens recorded on a Video CD or SVCD that supports PBC, you can enjoy interactive-type software as well as software having a search function. ■ Play list A list of selected titles to be played back in a specific order. This option is only available with VR format and must be created beforehand. ■ Progressive scan It displays all the horizontal lines of a picture at one time, as a signal frame. This system can convert the interlaced video from DVD into progressive format for connection to a progressive display. It dramatically increases the vertical resolution. 47 En English ■ Interactive menu Interactive video menus offer unprecedented convenience and control so you can quickly navigate between various scenes or bonus features, and select from audio track and subtitle options. Specifications Specifications PLAYABLE DISC FORMATS TV STANDARD • • • • • • • • • Number of lines ............................. PAL: 625, NTSC: 525 • Vertical frequency...................PAL: 50 Hz, NTSC: 60 Hz • Playback...............................Multi-standard (PAL/NTSC) • • • • DVD-Video DVD-R, DVD-RW, DVD-R DL DVD+R, DVD+RW, DVD+R DL Video CD, SVCD CD PICTURE CD CD-R, CD-RW MP3 (ISO 9660) fs 32, 44.1, 48 kHz...................................... 96-320 kbps WMA fs 44.1 kHz.................................................. 64-192 kbps fs 48 kHz................................................... 128-192 kbps WMV ..........................720 x 480/720 x 576 pixels or less DivX® JPEG......................................... 3072 x 2048 pixels or less VIDEO PERFORMANCE • Video (CVBS) output...........................1 Vpp into 75 ohm • S-Video output ................................Y: 1 Vpp into 75 ohm C: 0.3 Vpp into 75 ohm • Component video output .................Y: 1 Vpp into 75 ohm PB/CB (PB), PR/CR (PR): 0.7 Vpp into 75 ohm • RGB (Scart) output (Europe and Russia models only) ......................................................Y: 0.7 Vpp into 75 ohm AUDIO FORMAT • Digital Dolby Digital, DTS..........................Compressed digital PCM ......................... fs 44.1, 48, 96 kHz/16, 20, 24 bits • Analog sound ...........................................................Stereo AUDIO PERFORMANCE • • • • • DA Converter............................................................24 bit Signal-Noise (1 kHz) ............................................. 105 dB Dynamic range (1 kHz)............................................ 97 dB DVD ..... fs 96 kHz, 2 Hz-44 kHz/fs 48 kHz, 2 Hz-22 kHz SVCD ..........................................fs 48 kHz, 2 Hz-22 kHz/ fs 44.1 kHz, 2 Hz-20 kHz • CD, VCD...................................fs 44.1 kHz, 2 Hz-20 kHz • Distortion and Noise (1 kHz) .............................. 0.0035% MULTIMEDIA APPLICATIONS • Connections...................... USB mass storage class device • Playback formats (USB device) MP3............................. fs 32, 44.1, 48 kHz/96-320 kbps WMA .......................................... fs 44.1 kHz/64-192 kbps, fs 48 kHz/128-192 kbps WMV .......................720 x 480/720 x 576 pixels or less DivX® JPEG ..................................... 3072 x 2048 pixels or less 48 En CONNECTIONS • Video output .............................. RCA/Phono x 1 (yellow) • S-video output.................................. Mini DIN, 4 pins x 1 • Component video output Y output .................................... RCA/Phono x 1 (green) PB/CB (PB) output........................ RCA/Phono x 1 (blue) PR/CR (PR) output..........................RCA/Phono x 1 (red) • SCART (Europe and Russia models only) ............................................................. Euroconnector x 1 • Audio output (L+R) ....... RCA/Phono x 1 pair (white/red) • Digital output Coaxial.................................................. RCA/Phono x 1 (IEC60958 for CDDA, LPCM / IEC61937 for Dolby Digital, DTS) HDMI............................................................ Type A x 1 • USB.................................................................. Type A x 1 • Remote Control Input........................................... 3.5 mm mini jack x 1 Output ........................................ 3.5 mm mini jack x 1 CABINET • Dimensions (W x D x H) ....................435 x 310 x 51 mm (17-1/8 x 12-3/16 x 2 in) • Weight...................................Approx. 2.6 kg (5 lbs 12 oz) POWER SUPPLY • Power inlet U.S.A. and Canada models................. AC 120 V, 60 Hz Europe and Russia models.................. AC 230 V, 50 Hz Asia, and Central and South America models .......................................AC 110-240 V, 50 Hz/60 Hz Australia model............................AC 230-240 V, 50 Hz Korea model ................................AC 110-240 V, 60 Hz • Power consumption..................................... Approx. 16 W • Standby power consumption....................... Less than 1 W LASER Type Wave length Output Power Beam divergence Semiconductor laser GaAs/GaAlAs 650 nm (DVD) 780 nm (VCD/CD) 7 mW (DVD) 10 mW (VCD/CD) 60 degrees Specifications are subject to change without prior notice. 00cv_DV-S6165_U.fm Page 1 Monday, June 9, 2008 3:26 PM U DVD PLAYER LECTEUR DVD DV-S6165 ©2008 Yamaha Corporation All rights reserved. Black process 45.0° 240.0 LPI Printed in China 3139 245 30151 DV-S6165