Bose Professional EX-1280 Installatie gids

Categorie
Aanvullende muziekapparatuur
Type
Installatie gids
ControlSpace
EX-1280
EX-440C
EX-1280C
EX-12AEC
Installation & Operation Guide
Guía de instalación y funcionamiento
Guide d’installation et d’utilisation
Installations- und Bedienungsanleitung
Manuale di installazione e funzionamento
Installatie- en bedieningshandleiding
2 English EX-1280/440C/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
Important Safety Instructions
Please read and keep all safety, security and use instructions.
This product is intended for installation by professional installers only! This document is intended to
provide professional installers with basic installation and safety guidelines for this product in typical fixed-
installation systems. Please read this document and all safety warnings before attempting installation.
Do not attempt to service this product yourself. Refer all servicing to authorized service centers, installers,
technicians, dealers or distributors. To contact Bose Professional or to find a dealer or distributor near you,
visit PRO.BOSE.COM.
The product label is located on the bottom of the product.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
WARNINGS/CAUTIONS:
This symbol on the product means there are important operating
and maintenance instructions in this guide.
This symbol on the product means there is uninsulated, dangerous voltage
within the product enclosure that may present a risk of electrical shock.
WARNING: All Bose products must be installed in accordance with local, state, federal and industry
regulations. It is the installer's responsibility to ensure installation of the loudspeakers and mounting
system is performed in accordance with all applicable codes, including local building codes and
regulations. Consult the local authority having jurisdiction before installing this product.
WARNING: Unsafe mounting or overhead suspension of any heavy load can result in serious injury
or death, and property damage. It is the installer's responsibility to evaluate the reliability of any
mounting method used for their application. Only professional installers with the knowledge of
proper hardware and safe mounting techniques should attempt to install any loudspeaker overhead.
WARNING: To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids
or moisture.
WARNING: Do not mount the product in locations where condensation may occur.
WARNING: This product is not intended for installation or use in indoor water facility areas
(including, without limitation, indoor pools, indoor water parks, hot tub rooms, saunas, steam rooms
and indoor skating rinks).
WARNING: Do NOT make unauthorized alterations to this product.
WARNING: Do NOT use in vehicles or boats.
WARNING: Use this product only with the power supply provided.
WARNING: Where the mains plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
WARNING: Provide an earth connection or ensure the socket outlet incorporates a protective
earthing connection before connecting the plug to the mains socket outlet.
Dansk: Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til
stikproppens jord.
Suomi: Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.
Norsk: Apparatet må tilkoples jordet stikkontakt.
Svenska: Apparaten skall anslutas till jordat uttag.
WARNING: The speaker wire and interconnect cables included with this system are not approved
for in-wall installation. Please check your local building codes for the correct type of wire and cable
required for in-wall installation.
WARNING: Do not expose products containing batteries to excessive heat (e.g. from storage in direct
sunlight, fire or the like).
WARNING: The battery provided with this product may present a risk of fire or chemical burn if
mishandled.
WARNING: Contains small parts which may be a choking hazard. Not suitable for children under
age 3.
WARNING: Do not use hydrocarbon-based solvents, lubricants or cleaning agents of any type on
or around Bose speakers, and associated mounting hardware, during installation. The use of such
hydrocarbon based lubricants, solvents or cleaning agents on or around the mounting anchors and
screws can lead to degradation of the plastic material, possibly resulting in cracking and premature
failure of the product.
CAUTION: Keep the product away from fire and heat sources. Do NOT place naked flame sources,
such as lighted candles, on or near the product.
CAUTION: To reduce the risk of fire, use only No.26AWG (0.41mmØ / 0.13mm2) or larger
telecommunication line cord.
CAUTION: Only use the mounting hardware recommended by the rack manufacturer.
CAUTION: Due to ventilation requirements, Bose does not recommend placing the product in a
confined space such as in a wall cavity or in an enclosed cabinet.
CAUTION: Do not place or install the bracket or product near any heat sources, such as fireplaces,
radiators, heat registers or other apparatus (including amplifiers) that produce heat
Regulatory Information
CAN ICES-3(A)/NMB-3(A)
This product complies with the Canadian ICES-003 Class A specifications.
This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their own expense.
Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this
equipment.
This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
This product conforms to all applicable EU directive requirements. The complete declaration of
conformity can be found at www.Bose.com/compliance.
This product conforms to all applicable Electromagnetic Compatibility Regulations 2016 and all other
applicable UK regulations. The complete declaration of conformity can be found at:
www.Bose.com/compliance www.Bose.com/compliance
This symbol means the product must not be discarded as household waste, and should be delivered to
an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural
resources, human health and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where you bought this product.
This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment.
Shielded cables are required to maintain regulatory compliance.
Product Ratings: Input Voltage: 100 VAC–240 VAC
Frequency: 50/60 Hz
Current or Power: 60 W maximum
Initial turn-on inrush current: 20 A at 120 V; 38 A at 230 V
China Restriction of Hazardous Substances Table
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part Name Lead
(Pb) Mercury
(Hg) Cadmium
(Cd) Hexavalent
(CR(VI)) Polybrominated
Biphenyl (PBB) Polybrominated
diphenylether (PBDE)
PCBs X O O O O O
Metal Parts X O O O O O
Plastic Parts O O O O O O
Speakers X O O O O O
Cables X O O O O O
This table is prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement of GB/T 26572.
X: Indicates that this toxic or hazardous substance contained in at least one of the homoge-
neous materials used for this part is above the limit requirement of GB/T 26572.
Taiwan Restriction of Hazardous Substances Table
Equipment names: EX-440C, EX-1280, EX-1280C, EX-12AEC. Type designations: 834315, 834316, 834317, 834351, 834352, 834354
Restricted substances and its chemical symbols
Unit Lead
(Pb) Mercury
(Hg) Cadmium
(Cd) Hexavalent
chromium (Cr+6) Polybrominated
biphenyls (PBB) Polybrominated diphenyl
ethers (PBDE)
PCBs -○ ○
Metal Parts -○ ○
Plastic Parts ○ ○
Speakers -○ ○
Cables -○ ○
Note 1: ” indicates that the percentage content of the restricted substance does not exceed the percentage of reference
value of presence.
Note 2: The “−” indicates that the restricted substance corresponds to the exemption.
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “7” is 2007 or 2017.
China Importer: Bose Electronics (Shanghai) Company Limited, Level 6, Tower D, No. 2337 Gudai Rd. Minhang
District, Shanghai 201100
UK Importer: Bose Limited Bose House, Quayside Chatham Maritime, Chatham, Kent, ME4 4QZ, United Kingdom
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000
México, D.F. For importer & service information: +5255 (5202) 3545
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan. Phone
Number: +886-2-2514 7676
Bose Corporation Headquarters: 1-877-230-5639
AMX is a trademark of AMX Corporation. Crestron® is a registered trademark of Crestron Electronics, Inc. Arm is
a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere. Dante™ is a trademark of
Audinate Pty Ltd. All other trademarks are the property of their respective owners.
©2022 Bose Corporation. Bose is a trademark of Bose Corporation. No part of this work may be reproduced,
modified, distributed or otherwise used without prior written permission.
Warranty Information
This product is covered by a limited warranty.
For warranty details, visit PRO.BOSE.COM.
PRO.BOSE.COM
Guía de instalación y funcionamiento EX-1280/440C/1280C/12AEC Español 3
Instrucciones importantes de seguridad
Lea y conserve todas las instrucciones de uso y seguridad.
Este producto está diseñado para ser instalado únicamente por instaladores profesionales.
Este documento está diseñado para proveer las pautas de seguridad e instalación básicas a los
instaladores profesionales de este producto en sistemas de instalación fija comunes. Lea este
documento y todas las advertencias de seguridad antes de comenzar la instalación.
No intente reparar este producto por su cuenta. Remita todas las reparaciones a centros de servicio,
instaladores, técnicos o distribuidores autorizados. Para comunicarse con Bose Professional o para
encontrar un distribuidor cerca de usted, visite PRO.BOSE.COM.
La etiqueta del producto se encuentra en la parte inferior.
Instrucciones importantes de seguridad
1. Lea estas instrucciones.
2. Guarde estas instrucciones.
3. Preste atención a las advertencias.
4. Siga todas las instrucciones.
5. No use este aparato cerca del agua.
6. Límpielo solamente con un paño seco.
7. No obstruya ninguna abertura de ventilación. Realice la instalación conforme a las instrucciones
del fabricante.
8. No lo instale cerca de una fuente de calor, como radiadores, rejillas de calefacción, estufas u
otros aparatos (incluidos los amplificadores) que produzcan calor.
9. No anule el propósito de seguridad del enchufe con conexión a tierra o polarizado. Un enchufe
polarizado tiene dos hojas, una más ancha que la otra. Un enchufe con conexión a tierra tiene
dos clavijas planas y un tercer conector a tierra. La clavija plana más ancha o el tercer conector
son para su seguridad. Si el enchufe suministrado no encaja en la toma de corriente, consulte
con un electricista para cambiar la toma de corriente obsoleta.
10. Proteja el cable de alimentación para que nadie lo pise o lo perfore, especialmente en enchufes,
receptáculos de tomas múltiples y en el punto donde sale del dispositivo.
11. Use solamente los accesorios especificados por el fabricante.
12. Desenchufe este aparato durante tormentas eléctricas o cuando no lo utilice durante períodos
prolongados.
13. Derive todas las tareas de mantenimiento a personal calificado. Se requieren tareas de
mantenimiento si el aparato se daña de alguna manera; por ejemplo, si se daña el enchufe o el
cable de alimentación, si se derrama líquido o si caen objetos dentro del aparato, si se expone el
aparato a la lluvia o la humedad, si no funciona normalmente o si se ha caído.
ADVERTENCIAS/PRECAUCIONES:
Este símbolo en el producto indica que en esta guía se incluyen
instrucciones de mantenimiento y funcionamiento importantes.
Este símbolo en el producto indica que hay voltaje peligroso y sin
aislamiento dentro de la carcasa del producto, lo cual podría representar
un riesgo de descarga eléctrica.
ADVERTENCIA: Todos los productos Bose deben instalarse conforme a las leyes locales,
estatales, federales y del sector. Es responsabilidad del instalador garantizar que la instalación
del sistema de soporte y los altavoces se realice conforme a los códigos aplicables, incluidos
los códigos y las reglamentaciones de construcción locales. Consulte a la autoridad local
competente antes de instalar este producto.
ADVERTENCIA: El montaje inseguro o la suspensión en alturas de cualquier carga
pesada puede provocar lesiones graves o la muerte, además de daños a la propiedad. Es
responsabilidad del instalador evaluar la confiabilidad de cualquier método de montaje
utilizado para su aplicación. Únicamente los instaladores profesionales con conocimiento
de las herramientas adecuadas y las técnicas de montaje seguro deberían intentar instalar
cualquier altavoz en altura.
ADVERTENCIA: Para reducir el riesgo de incendio o descarga eléctrica, NO exponga este
producto a la lluvia, líquidos o humedad.
ADVERTENCIA: No monte el producto en lugares donde se pueda generar condensación.
ADVERTENCIA: Este producto no se ha diseñado para instalar o utilizar en áreas acuáticas
recreativas de interior (incluidas, entre otras, piscinas de interior, parques acuáticos de interior,
salas de baño caliente, saunas, cuartos de vapor y pistas de patinaje de interior).
ADVERTENCIA: NO realice alteraciones no autorizadas a este producto.
ADVERTENCIA: NO lo use en vehículos o embarcaciones.
ADVERTENCIA: Use este producto solamente con la fuente de alimentación suministrada.
ADVERTENCIA: Si se utiliza la clavija de conexión de red eléctrica o el acoplador del artefacto
como dispositivo de des-conexión, este deberá permanecer listo para funcionar.
ADVERTENCIA: Proporcione una conexión a tierra o asegúrese de que la toma de corriente
incorpore una conexión a tierra protegida antes de conectar el enchufe a la toma de corriente
de la red eléctrica.
ADVERTENCIA: El cable del altavoz y los cables de interconexión que se incluyen con este
sistema no están aprobados para instalaciones en pared. Compruebe los códigos locales de
edificación para verificar cuáles son los tipos correctos de alambre y cable requeridos para
instalaciones en pared.
ADVERTENCIA: NO exponga productos con batería al calor excesivo (por ejemplo, no guardar
en sitios con luz directa del sol, cerca de fuego o similar).
ADVERTENCIA: La batería suministrada con este producto puede presentar riesgo de
incendio o quemadura química si no se manipula correctamente.
ADVERTENCIA: Contiene piezas pequeñas que pueden provocar asfixia. No recomendable
para niños menores de 3 años.
ADVERTENCIA: No utilice ningún tipo de solventes, lubricantes ni productos de limpieza a
base de hidrocarburos sobre los altavoces Bose o los accesorios de montaje asociados durante
la instalación. El uso de dichos sol-ventes, lubricantes o productos de limpieza sobre los
anclajes de montaje y los tornillos puede degradar el material plástico, lo que posiblemente
ocasione grietas y fallas prematuras del producto.
PRECAUCION: Mantenga el producto lejos del fuego y de fuentes de calor. NO coloque
encima ni cerca del producto fuentes de llamas de fuego expuestas, como velas encendidas.
PRECAUCION: Utilice únicamente los componentes físicos de montaje incluidos en este
producto.
PRECAUCION: Debido a los requisitos de ventilación, Bose no recomienda colocar el producto
en espacios reducidos como una cavidad de pared o un gabinete cerrado.
PRECAUCION: No instale ni coloque el soporte ni el producto cerca de fuentes de calor, como
chimeneas, radiadores, rejillas de calefacción u otros aparatos (incluidos amplificadores) que
produzcan calor.
Información regulatoria
CAN ICES-3(A)/NMB-3(A)
Este producto cumple con las especificaciones Clase A de la normativa canadiense ICES-003.
Este dispositivo cumple con la parte 15 de las reglas de la FCC y con las normas RSS sin licencia de la industria
canadiense. El funcionamiento está sujeto a las siguientes dos condiciones: (1) este dispositivo no debe
provocar interferencias dañinas y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluida la
interferencia que puede causar un funcionamiento no deseado.
Nota: Este equipo ha sido sometido a pruebas y se ha comprobado que cumple con los límites de un
dispositivo digital Clase A, de acuerdo con la Parte 15 de las reglas de la FCC. Estos límites están diseñados
para proporcionar una protección razonable contra interferencias perjudiciales cuando el equipo se utiliza en
un entorno comercial. Este equipo genera, usa y puede irradiar energía de radiofrecuencia y, si no se instala y
se usa conforme a lo indicado en el manual de instrucciones, podría causar una interferencia perjudicial a las
comunicaciones de radio. El funcionamiento de este equipo en un área residencial podría llegar a provocar
interferencias perjudiciales, en cuyo caso el usuario deberá corregir dichas interferencias por cuenta propia.
Los cambios o las modificaciones no aprobadas expresamente por Bose Corporation podrían invalidar la
autoridad del usuario para operar el equipo.
Este es un producto Clase A. En un entorno doméstico, es posible que el producto ocasione interferencia de
radio, en cuyo caso el usuario puede que deba tomar las medidas adecuadas.
Este producto cumple los requisitos de todas las Directivas de la UE aplicables legalmente.
Encontrará la declaración de conformidad completa en
www.Bose.com/compliance.
Este producto cumple con todas las regulaciones aplicables de compatibilidad electromagnética
de 2016 y todas las demás regulaciones aplicables del Reino Unido. La declaración de
conformidad completa se puede encontrar en:
www.Bose.com/compliancewww.Bose.com/compliance
Este símbolo significa que el producto no debe desecharse como residuo doméstico y debe
enviarse a una planta para tratamiento de residuos apropiada para su reciclado. Una eliminación
y un reciclado adecuados ayudan a proteger los recursos naturales, la salud humana y el
medioambiente. Para obtener más información acerca de la eliminación y el reciclado de este
producto, comuníquese con su municipalidad local, un centro de servicios de desecho o la tienda
donde compró este producto.
Este producto cumple con todos los requisitos de inmunidad de EN55103-2 para un entorno
electromagnético E2.
Se requieren cables aislados para mantener el cumplimiento de las reglamentaciones.
Especificaciones
del producto: Voltaje de entrada: 100 VAC–240 VAC
Frecuencia: 50/60 Hz
Consumo: 60 W maximum
Corriente de irrupción inicial en encendido: 20 A @ 120 V; 38 A @ 230 V
Fecha de fabricación: El octavo dígito del número de serie indica el año de fabricación; p. ej., "7" es 2007 o
2017.
Importador en China: Bose Electronics (Shanghai) Company Limited, Level 6, Tower D, No. 2337 Gudai Rd.
Minhang District, Shanghai 201100, China
Importador en el Reino Unido: Bose Limited, Bose House, Quayside Chatham Maritime, Chatham, Kent, ME4
4QZ, Reino Unido
Importador para la UE: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, Países Bajos
Importador para México: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de
Chapultepec, 11000 México, D.F. Para obtener información sobre el servicio y el importador, comuníquese al:
+5255 (5202) 3545
Importador para Taiwán: Bose Taiwan Branch, 9F-A1, N.º 10, Section 3, Minsheng East Road,
Taipei City 104, Taiwán. Número telefónico: +886-2-2514 7676
Oficinas centrales de Bose Corporation: 1-877-230-5639
AMX es una marca comercial de AMX Corporation. Crestron® es una marca comercial registrada de Crestron
Electronics, Inc. Arm es una marca comercial registrada de Arm Limited (o sus filiales) en Estados Unidos u
otros países. Dante™ es una marca comercial de Audinate Pty Ltd. Todas las demás marcas comerciales son
propiedad de sus respectivaos dueños.
©2022 Bose Corporation. Bose es una marca comercial de Bose Corporation. Ninguna parte de este trabajo
podrá reproducirse, modificarse, distribuirse ni usarse sin un permiso previo por escrito.
Información de la garantía
Este producto está cubierto con una garantía limitada.
Para obtener información sobre la garantía, visite PRO.BOSE.COM.
PRO.BOSE.COM
EX-1280/440C/1280C/12AEC Guide d’installation et d’utilisation4 Français
Instructions importantes relatives à la sécurité
Merci de lire et de conserver le manuel d’instruction et de respecter les
consignes de sécurité.
Ce produit doit être installé par un technicien professionnel ! Ce document est destiné à fournir aux
techniciens professionnels les directives de montage et de sécurité relatives à ce produit dédié à une
installation fixe. Veuillez lire ce document, ainsi que l’ensemble des avertissements de sécurité avant
de procéder à l’installation.
Ne tentez pas de réparer ce produit vous-même. Confiez toutes les opérations de maintenance à
des centres de service, installateurs, techniciens, revendeurs ou distributeurs agréés. Pour contacter
Bose Professional ou pour trouver un revendeur ou un distributeur près de chez vous, rendez-vous à
l’adresse PRO.BOSE.COM.
L’étiquette d’identification du produit est située au-dessous de l’appareil.
Instructions importantes relatives à la sécurité
1. Veuillez lire ces consignes.
2. Veuillez conserver ces consignes.
3. Respectez tous les avertissements.
4. Suivez toutes les consignes.
5. N’utilisez pas cet appareil à proximité d’eau ou de toute autre source d’humidité.
6. Utilisez uniquement un chion sec pour le nettoyage.
7. Ne bloquez jamais les orifices d’aération. Suivez les instructions du fabricant pour l’installation.
8. N’installez pas cet appareil à proximité d’une quelconque source de chaleur, telle qu’un
radiateur, une arrivée d’air chaud, un four ou tout autre appareil (notamment les amplificateurs)
produisant de la chaleur.
9. Veillez à profiter de la sécurité oerte par les installations de type terre ou polarisées. Les fiches
polarisées sont équipées de deux bornes de largeurs diérentes. Les fiches de type terre sont
équipées de deux bornes et d’un orifice pour la mise à la terre. Ces deux types de dispositifs
ont pour but d’assurer votre sécurité. Si la prise fournie ne s’adapte pas à votre prise de courant,
consultez un électricien pour qu’il remplace cette prise obsolète.
10. Protégez le cordon d’alimentation contre les risques de piétinement ou de pincement,
notamment au niveau des fiches, des prises de courant et des branchements à l’appareil.
11. Utilisez uniquement les accessoires spécifiés par le fabricant.
12. Débranchez cet appareil pendant les orages ou au cours des longues périodes de non-utilisation.
13. Confiez toute réparation à du personnel qualifié. Une réparation est nécessaire lorsque l’appareil
a été endommagé de quelque façon que ce soit (endommagement du cordon d’alimentation
ou de la fiche électrique, renversement d’un liquide ou de tout objet sur l’appareil, exposition de
l’appareil à la pluie ou à l’humidité, mauvais fonctionnement, chute de l’appareil, etc.).
AVERTISSEMENTS/PRÉCAUTIONS:
Ce symbole sur le produit signale les instructions importantes mentionnées dans
le guide d’installation, relatives au fonctionnement et à l’entretien de l’appareil.
Ce symbole sur le produit indique la présence d’une tension électrique dangereuse non
isolée à l’intérieur de l’appareil, susceptible d’induire un risque de décharge électrique.
AVERTISSEMENT: Tous les produits Bose doivent être installés dans le respect des
réglementations locales et nationales. L’installateur est responsable du respect de tous les
codes et règlements locaux et nationaux en vigueur applicables à l’installation et au montage
des enceintes. Consultez les autorités locales compétentes avant d’installer ce produit.
AVERTISSEMENT: Tout montage non sécurisé d’une lourde charge peut provoquer
des dégâts matériels et des blessures graves, voire la mort. Il en va de la responsabilité
de l’installateur d’évaluer la fiabilité de la méthode de montage utilisée, en fonction de
l’application. Seul un installateur professionnel connaissant les acces-soires et techniques de
montage adaptés est qualifié pour installer des enceintes suspendues.
AVERTISSEMENT: Pour limiter les risques d’incendie ou d’électrocution, n’exposez PAS cet
appareil à la pluie, à toutes formes de liquides ou à l’humidité.
AVERTISSEMENT: Ne montez pas le produit dans des endroits où de la condensation peut
se former.
AVERTISSEMENT: Ce produit n’est pas destiné à être monté ou utilisé dans des installations
humides en intérieur (par exemple piscine intérieure, parc aquatique intérieur, baignoire à
remous, sauna, hammam, patinoire inté-rieure, etc.).
AVERTISSEMENT: Veillez à NE PAS eectuer de modifications non autorisées sur ce produit.
AVERTISSEMENT: Veillez à NE PAS utiliser cet appareil dans des véhicules ou des bateaux.
AVERTISSEMENT: Utilisez ce produit uniquement avec l’adaptateur secteur fourni.
AVERTISSEMENT: Lorsque l’alimentation de secteur ou la prise multiple est utilisée comme
dispositif de débranchement de l’appareil, le dispositif de débranchement doit rester
facilement accessible.
AVERTISSEMENT: Avant de brancher l’appareil à une prise de courant électrique, vérifiez que
celle-ci soit bien raccordée à la terre ou qu’elle est dotée d’une protection par mise à la terre.
AVERTISSEMENT: Les câbles d’enceintes et d’interconnexion fournis avec cet appareil ne
sont pas compatibles avec une installation encastrée. Consultez la réglementation locale pour
connaître le type de câblage requis pour une installation encastrée.
AVERTISSEMENT: N’exposez PAS les produits contenant des piles ou des batteries à une
chaleur excessive (ne les placez pas à la lumière directe du soleil, près d’un feu ou de toute
autre source de chaleur).
AVERTISSEMENT: La batterie fournie avec ce produit peut provoquer un incendie ou une
brûlure chimique en cas de mani-pulation incorrecte.
ATTENTION: Pour réduire les risques d’incendie, utilizer uniquement des conducteurs de
télécommunications 26AWG (0.41mmØ / 0.13mm2) au de section supérleure.
AVERTISSEMENT: Certaines petites pièces présentent un risque de suocation. Ne les laissez
pas à la portée des enfants de moins de 3 ans.
AVERTISSEMENT: N’utilisez aucun type de solvant, d’huile de graissage ou de produit de
nettoyage à base d’hydrocarbure sur ou autour des enceintes Bose et du matériel de montage
associé pendant l’installation. L’utilisation de ces solvants, huiles de graissage et produits
de nettoyage à base d’hydrocarbure sur ou autour des fixations de montage et des vis peut
entraîner une dégradation du matériel en plastique et occasionner de potentielles fissures ou
une défaillance prématurée du produit.
PRÉCAUTION: Tenez le produit à l’écart du feu et des sources de chaleur. Ne placez JAMAIS
d’objets enflammés, tels que des bougies allumées, sur l’appareil ou à proximité.
PRÉCAUTION: Utilisez exclusivement le matériel de montage en rack recommandé par le
fabricant.
PRÉCAUTION: Pour assurer une ventilation correcte, Bose déconseille de placer ce produit
dans un espace confiné tel qu’une cavité murale ou un placard fermé.
PRÉCAUTION: N’installez pas le support ou le produit à proximité d’une source de
chaleur, telle qu’une cheminée, un radiateur, une arrivée d’air chaud ou tout autre appareil
(notamment les amplificateurs) produisant de la chaleur.
Informations réglementaires
CAN ICES-3 (A)/NMB-3(A)
Ce produit est conforme aux spécifications de la réglementation ICES-003 classe A du Canada.
Cet appareil est conforme à la partie15 de la réglementation de la FCC et au(x) standard(s) RSS
exempté(s) de licence d’Industrie Canada. Son fonctionnement repose sur les deux conditions
suivantes: (1) cet appareil ne doit pas provoquer d’interférences et (2) cet appareil doit tolérer les
interférences externes, y compris celles qui peuvent provoquer un fonctionnement anormal.
REMARQUE: Ce matériel a fait l’objet de tests prouvant sa conformité aux limites imposées aux
appareils numériques de classeA, conformément à la partie 15 des réglementations de la FCC. Ces
limites sont conçues pour orir une protection raisonnable contre les interférences nuisibles lorsque
l’appareil est utilisé en environnement commercial. Cet appareil génère, utilise et est susceptible
d’émettre de l’énergie à certaines fréquences radio. À ce titre, s’il n’est pas installé ou utilisé
conformément aux instructions, il est susceptible de perturber les communications radio. L’utilisation
de cet équipement dans une zone résidentielle risque de provoquer des interférences nuisibles,
auquel cas l’utilisateur devra remédier au problème à ses propres frais.
Toute modification non autorisée expressément par Bose Corporation est susceptible d’annuler le
droit de l’utilisateur à utiliser cet appareil.
Ceci est un produit de catégorie A. Dans un environnement domestique, ce produit peut provoquer
des interférences radio, auquel cas l’utilisateur devra prendre des mesures adéquates.
Ce produit est conforme à toutes les directives de la Communauté Européenne qui s’y
appliquent. L’attestation complète de conformité est disponible à l’adresse
www.Bose.com/compliance.
Ce produit est conforme à toutes les réglementations de 2016 en matière de compatibilité
électromagnétique et à toutes les autres réglementations britanniques applicables.
L’attestation complète de conformité est disponible à l’adresse
www.Bose.com/compliancewww.Bose.com/compliance
Ce symbole signifie que le produit ne doit pas être jeté avec les déchets ménagers, mais
doit être déposé dans un centre de collecte approprié pour recyclage. La mise au rebut
adéquate et le recyclage permettent de protéger les ressources naturelles, la santé
humaine et l’environnement. Pour plus d’informations sur l’élimination et le recyclage de
ce produit, contactez votre mairie, votre service d’enlèvement des ordures ou le magasin
où vous avez acheté ce produit.
Ce produit répond aux critères d’immunité de la normeEN55103-2 pour les environnements
électromagnétiques classésE2.
Des câbles blindés doivent être utilisés pour assurer le respect des réglementations.
Spécifications du produit: Tension d’entrée: 100 VAC – 240 VAC
Fréquence: 50/60 Hz
Courant ou puissance: 60 W maximum
Appel de courant au démarrage: 20 A à 120 V; 38 A à 230 V
Date de fabrication: Le huitième chire du numéro de série indique l’année de fabrication; par
exemple, «7» correspond à 2007 ou à 2017.
Importateur pour la Chine: Bose Electronics (Shanghai) Company Limited, Level 6, Tower D, No.
2337 Gudai Rd. Minhang District, Shanghai 201100
Importateur pour le Royaume-Uni: Bose Limited, Bose House, Quayside Chatham Maritime,
Chatham, Kent, ME4 4QZ, Royaume-Uni
Importateur pour l’UE: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, Pays-Bas
Importateur pour le Mexique: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204,
Lomas de Chapultepec, 11000 México, D.F. Pour plus d’informations sur l’importateur et le service :
+5255 (5202) 3545
Importateur pour Taïwan: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road,
Taipei City 104, Taïwan. Numéro de téléphone: +886-2-2514 7676
Siège de Bose Corporation: 1-877-230-5639
AMX est une marque commerciale de AMX Corporation. Crestron® est une marque déposée de
Crestron Electronics, Inc. Arm est une marque déposée de Arm Limited (ou de ses filiales) aux États-
Unis et/ou dans d’autres pays. Dante™ est une marque commerciale d’Audinate Pty Ltd. Toutes les
autres marques commerciales appartiennent à leurs propriétaires respectifs.
©2022 Bose Corporation. Bose est une marque déposée de Bose Corporation. Toute reproduction,
modification, distribution ou autre utilisation, même partielle, de ce document est interdite sans
autorisation écrite préalable.
Informations relatives à la garantie
Cet appareil est couvert par une garantie limitée.
Pour en savoir plus sur la garantie, consultez la page PRO.BOSE.COM.
PRO.BOSE.COM
Installations- und Bedienungsanleitung EX-1280/440C/1280C/12AEC Deutsch 5
Wichtige Sicherheitshinweise
Bitte lesen Sie alle Sicherheitshinweise und Gebrauchsanleitungen durch
und bewahren Sie sie auf.
Dieses Produkt darf nur von fachkundigen Monteuren installiert werden! Dieses Dokument
soll fachkundigen Monteuren grundlegende Installations- und Sicherheitsrichtlinien für dieses
Produkt in typischen Festinstallationssystemen bieten. Bitte lesen Sie dieses Dokument und alle
Sicherheitshinweise vor der Installation durch.
Versuchen Sie nicht, dieses Produkt selbst zu warten. Lassen Sie jegliche Reparatur- und
Wartungsarbeiten nur von autorisierten Servicepartnern, Monteuren, Technikern, Händlern oder
Vertreibern durchführen. Die Bose Professional Kontaktdaten für Ihr Land sowie Informationen zu
Händlern oder Vertreibern in Ihrer Nähe finden Sie auf PRO.BOSE.COM.
Das Etikett mit der Produktbezeichnung befindet sich auf der Unterseite des Geräts.
Wichtige Sicherheitshinweise
1. Lesen Sie die folgenden Anweisungen.
2. Bewahren Sie die Anweisungen auf.
3. Beachten Sie alle Warn- und Sicherheitshinweise.
4. Befolgen Sie alle Anweisungen.
5. Verwenden Sie dieses Gerät nicht in der Nähe von Wasser.
6. Reinigen Sie das Gerät nur mit einem sauberen, trockenen Tuch.
7. Achten Sie darauf, dass die Lüftungsönungen nicht blockiert sind. Stellen Sie das Gerät nur in
Übereinstimmung mit den Herstelleranweisungen auf.
8. Stellen Sie das Gerät nicht in der Nähe von Wärmequellen auf, wie zum Beispiel Heizkörpern,
Wärmespeichern, Öfen oder anderen Geräten (auch Verstärkern), die Wärme erzeugen.
9. Achten Sie darauf, dass die Schutzfunktion des Schutzkontaktsteckers nicht beeinträchtigt wird.
Ein gepolter Stecker hat zwei Stromkontakte, von denen einer breiter als der andere ist. Ein
Schutzkontaktstecker hat zwei Stromkontakte und einen dritten Erdungskontakt. Der breitere
bzw. dritte Kontakt dient Ihrer Sicherheit. Falls der mitgelieferte Stecker nicht in Ihre Steckdose
passt, wenden Sie sich an einen qualifizierten Elektriker, um die Steckdose auszutauschen.
10. Verlegen Sie das Netzkabel so, dass es keine Stolpergefahr darstellt und nicht beschädigt
werden kann – insbesondere im Bereich von Steckern und Steckdosen und dort, wo das
Netzkabel aus dem Gerät herausgeführt wird.
11. Verwenden Sie nur Zubehör-/Anbauteile, die vom Hersteller zugelassen sind.
12. Ziehen Sie das Netzkabel bei Gewitter oder bei längerer Nichtbenutzung des Gerätes aus der
Steckdose.
13. Lassen Sie jegliche Reparatur- und Wartungsarbeiten nur von qualifiziertem Fachpersonal
durchführen. Wartungsarbeiten sind in folgenden Fällen nötig: bei jeglichen Beschädigungen
wie z.B. des Netzkabels oder Netzsteckers, wenn Flüssigkeiten oder Gegenstände in das
Gehäuse gelangt sind, das Gerät Regen oder Feuchtigkeit ausgesetzt wurde, fallen gelassen
wurde oder nicht ordnungsgemäß funktioniert.
WARNHINWEISE:
Dieser Warnhinweis auf dem Produkt weist auf wichtige Bedien-
und Wartungsinformationen in dieser Anleitung hin.
Dieser Warnhinweis auf dem Produkt warnt vor nicht isolierten gefährlichen
Spannungsquellen im Inneren des Produktes, die ein Stromschlagrisiko
darstellen können. Es besteht die Gefahr von Stromschlägen!
WARNUNG: Alle Produkte von Bose müssen gemäß den örtlichen und staatlichen
Vorschriften sowie gemäß allen Branchenbestimmungen installiert werden. Der Monteur
ist dafür verantwortlich, sicherzustellen, dass die Installation der Lautsprecher und der
Halterung gemäß allen geltenden Vorschriften durchgeführt wird, einschließlich örtlicher
Bauvorschriften und -bestimmungen. Wenden Sie sich vor der Installation dieses Produkts an
die zuständige abnehmende Behörde.
WARNUNG: Eine unsichere Befestigung schwerer Lasten oder deren Aufhängung über Kopf
kann zu schweren oder tödlichen Verletzungen und Sachschäden führen. Der Monteur ist dafür
verantwortlich, die Zuverlässigkeit der für die Anwendung verwendeten Befestigungstechniken
zu prüfen. Nur fachkundige Monteure mit Wissen über sachgemäße Befestigungselemente und
sichere Befestigungstechniken sollten Lautsprecher über Kopf installieren.
WARNUNG: Um Brände und Stromschläge zu vermeiden, darf dieses Produkt NICHT Regen,
Flüssigkeiten oder Feuchtigkeit ausgesetzt werden.
WARNUNG: Montieren Sie das Produkt nicht an Orten, an denen Kondenswasser auftreten
kann.
WARNUNG: Dieses Produkt ist nicht für die Installation oder Verwendung in Bereichen mit
Wassereinrichtungen in Innenräumen (zum Beispiel Schwimmbädern, Wasserparks, Räume
mit Whirlpools, Saunas, Dampfbäder und Eislaufbahnen) gedacht.
WARNUNG: Nehmen Sie KEINE nicht genehmigten Änderungen an diesem Produkt vor.
WARNUNG: Verwenden Sie das Produkt NICHT in Fahrzeugen oder Booten.
WARNUNG: Verwenden Sie dieses Produkt nur mit dem mitgelieferten Netzteil.
WARNUNG: Falls Sie den Netzstecker oder eine Mehrfachsteckdose verwenden, um das Gerät
von der Stromversorgung zu trennen, sollten Sie sicherstellen, dass Sie jederzeit auf den
Stecker zugreifen können.
WARNUNG: Nutzen Sie einen Erdungsanschluss oder stellen Sie sicher, dass an der Steckdose
ein Erdungsschutz vorliegt, bevor Sie den Netzstecker an die Steckdose anschließen.
WARNUNG: Die mit diesem System mitgelieferten Lautsprecher- und Verbindungskabel sind
nicht für den Wandeinbau zugelassen. Bitte sehen Sie in Ihren örtlichen Bauvorschriften nach,
welcher Kabeltyp für den entsprechenden Wandeinbau erforderlich ist.
WARNING: Setzen Sie Geräte, die Batterien enthalten, NICHT übermäßig hohen Temperaturen
aus (in dem Sie sie z. B. direkter Sonneneinstrahlung aussetzen oder in der Nähe von Feuer
usw. lagern).
WARNUNG: Der Akku, der mit diesem Produkt geliefert wurde, kann möglicherweise ein
Brand- oder Verätzungsrisiko darstellen, wenn er nicht sachgemäß gehandhabt wird.
WARNUNG: Enthält kleine Teile, die verschluckt werden können und eine Erstickungsgefahr
darstellen. Nicht geeignet für Kinder unter drei Jahren.
WARNUNG: Verwenden Sie keine auf Kohlenwassersto basierenden Lösungsmittel,
Schmiermittel oder Reinigungsmittel am oder in der Nähe des Bose Lautsprechers oder
während der Installation mit dem zugehörigen Montagematerial. Diese Mittel können den
Kunststo des Lautsprechers und der Montagevorrichtungen angreifen und zu Rissen im
Material und somit zu einem (vorzeitigen) Produktdefekt führen.
VORSICHT: Halten Sie das Produkt von Feuer und Wärmequellen fern. Stellen Sie KEINE
brennenden Kerzen oder ähnliches auf das Gerät oder in die Nähe des Geräts.
VORSICHT: Verwenden Sie nur die vom Rack-Hersteller empfohlenen Montagehilfsmittel.
VORSICHT: Aufgrund der Belüftungsanforderungen sollten Sie das Produkt nicht in einem
geschlossenen Raum, zum Beispiel in einer Wandnische oder in einem geschlossenen
Schrank, aufstellen.
VORSICHT: Montieren oder platzieren Sie das Gerät nicht in der Nähe von Wärmequellen wie
Heizkörpern, Wärmespeichern oder anderen Geräten.
Gesetzliche Hinweise
CAN ICES-3(A)/NMB-3(A)
Dieses Produkt erfüllt die kanadische Richtlinie ICES-003, Klasse A.
Dieses Gerät erfüllt die Bestimmungen in Teil 15 der FCC-Vorschriften und die lizenzfreien Standards von
Industry Canada. Der Betrieb unterliegt den beiden folgenden Bedingungen: (1) dieses Gerät darf keine
Störungen verursachen und (2) dieses Gerät muss jegliche Störungen tolerieren, einschließlich Störungen,
die zu unerwünschten Betriebsstörungen führen.
Hinweis: Dieses Gerät wurde geprüft. Es stimmt mit den Regelungen für Geräte der Klasse A gemäß
Teil 15 der FCC-Vorschriften überein. Diese Grenzwerte sollen einen angemessenen Schutz gegen
elektromagnetische Störungen beim Betrieb in gewerblicher Umgebung gewährleisten. Dieses Gerät
erzeugt und verwendet Hochfrequenzstrahlung und kann sie auch aussenden. Daher verursacht das
Gerät, wenn die Installation und Benutzung nicht in Übereinstimmung mit dieser Bedienungsanleitung
erfolgt, möglicherweise Störungen des Funkverkehrs. Beim Betrieb dieses Geräts in Wohngebieten können
erhebliche Störungen des Funkverkehrs verursacht werden. Eventuell daraus entstehende Kosten trägt allein
der Benutzer des Geräts.
Veränderungen am Gerät, die nicht durch die Bose Corporation autorisiert wurden, können zur Folge haben,
dass die Betriebserlaubnis für das Gerät erlischt.
Dies ist ein Produkt der Klasse A. Das Produkt kann im Wohnbereich Funkstörungen verursachen. In diesem
Fall kann es für den Betreiber erforderlich sein, entsprechende Maßnahmen zu ergreifen.
Dieses Produkt erfüllt alle vorgeschriebenen EU-Richtlinien. Die vollständige
Konformitätserklärung ist einsehbar unter www.Bose.com/compliance.
Dieses Produkt erfüllt alle geltenden Vorschriften zur elektromagnetischen Verträglichkeit 2016
und alle anderen zutreenden UK-Richtlinien. Die vollständige Konformitätserklärung ist
einsehbar unter www.Bose.com/compliance
Dieses Symbol bedeutet, dass das Produkt nicht mit dem Hausmüll entsorgt werden darf,
sondern bei einer geeigneten Sammelstelle für das Recycling abgegeben werden muss. Die
ordnungsgemäße Entsorgung und das Recycling tragen dazu bei, die natürlichen Ressourcen,
die Gesundheit und die Umwelt zu schützen. Weitere Informationen zur Entsorgung und zum
Recycling dieses Produkts erhalten Sie von Ihrer zuständigen Kommune, Ihrem
Entsorgungsdienst oder dem Geschäft, in dem Sie dieses Produkt gekauft haben.
Dieses Produkt erfüllt alle Anforderungen nach EN55103-2 für elektromagnetische Verträglichkeit.
Abgeschirmte Kabel müssen den gesetzlichen Vorschriften entsprechen.
Leistungsdaten: Eingangsspannung: 100 VAC – 240 VAC
Frequenz: 50/60 Hz
Nennleistung: Max. 60 W
Einschaltstrom bei erstem Einschalten: 20 A bei 120 V; 38 A bei 230 V
Herstellungsdatum: Die achte Zier in der Seriennummer gibt das Herstellungsjahr an: „7“ ist 2007 oder 2017.
Importeur aus China: Bose Electronics (Shanghai) Company Limited, Level 6, Tower D, No. 2337 Gudai Rd.
Minhang District, Shanghai 201100
Importeur aus UK: Bose Limited, Bose House, Quayside Chatham Maritime, Chatham, Kent, ME4 4QZ,
Vereinigtes Königreich
Importeur aus der EU: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, Niederlande
Importeur aus Mexiko: Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de
Chapultepec, 11000 México, D.F. Importeur- und Serviceinformationen erhalten Sie unter:
+5255 (5202) 3545
Importeur aus Taiwan: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road,
Taipei City 104, Taiwan. Tel.:+886-2-25147676
Hauptsitz der Bose Corporation: 1-877-230-5639
AMX ist eine Marke von AMX Corporation. Crestron® ist eine eingetragene Marke von Crestron Electronics, Inc.
Arm ist eine eingetragene Marke von Arm Limited (oder seinen Tochterunternehmen) in den USA und/oder
anderen Ländern. Dante™ ist eine Marke von Audinate Pty Ltd. Alle anderen Marken sind das Eigentum ihrer
jeweiligen Inhaber.
©2022 Bose Corporation. Bose ist eine Marke von Bose Corporation. Dieses Dokument darf ohne vorherige
schriftliche Genehmigung weder ganz noch teilweise reproduziert, verändert, vertrieben oder in anderer
Weise verwendet werden.
Garantiehinweise
Für dieses Produkt gilt eine eingeschränkte Garantie.
Einzelheiten zur Garantie finden Sie unter PRO.BOSE.COM.
PRO.BOSE.COM
EX-1280/440C/1280C/12AEC Manuale di installazione e funzionamento6 Italiano
Informazioni importanti sulla sicurezza
Leggere e conservare tutte le istruzioni per la sicurezza e per l'uso.
Questo prodotto deve essere installato esclusivamente da installatori professionisti. Il presente
documento ha lo scopo di fornire agli installatori professionisti le istruzioni di base per l’installazione
e la sicurezza del prodotto in tipici impianti da installazione fissa. Prima dell’installazione, leggere
questo documento e le avvertenze sulla sicurezza.
Non tentare di riparare il prodotto autonomamente. Per tutti gli interventi di assistenza, rivolgiti ai
centri assistenza, agli installatori, ai tecnici, ai rivenditori o ai distributori autorizzati. Per contattare Bose
Professional o per trovare il rivenditore o distributore più vicino, visita PRO.BOSE.COM.
L’etichetta identificativa è situata sul fondo del prodotto.
Informazioni importanti sulla sicurezza
1. Leggere queste istruzioni.
2. Conservare queste istruzioni.
3. Prestare attenzione a tutte le avvertenze.
4. Seguire tutte le istruzioni.
5. Non utilizzare l'apparecchio in prossimità di acqua.
6. Per la pulizia utilizzare un semplice panno asciutto.
7. Non ostruire le aperture di ventilazione. Installare il prodotto in conformità con le istruzioni
fornite dal produttore.
8. Non installare in prossimità di fonti di calore, quali termosifoni, radiatori, stufe o altri apparecchi
(compresi gli amplificatori) che generino calore.
9. Non danneggiare le parti di sicurezza della spina polarizzata o con messa a terra. Una spina
polarizzata è dotata di due poli, uno più largo dell’altro. Una spina con messa a terra è dotata
di due poli e di un terzo terminale di massa. Il polo più largo e il terzo terminale sono presenti
per sicurezza. Se la spina in dotazione non è adatta alla presa, rivolgersi a un elettricista per la
sostituzione della presa obsoleta.
10. Evitare che il cavo di alimentazione venga calpestato o schiacciato, soprattutto in corrispondenza
di spine, prese e nel punto di uscita dell'apparecchio.
11. Utilizzare solo sistemi di fissaggio/accessori specificati dal produttore.
12. Scollegare l'apparecchio durante i temporali o quando non utilizzato per lunghi periodi di tempo.
13. Adarsi a personale qualificato per tutti gli interventi di assistenza. Gli interventi di assistenza
si rendono necessari in caso di danni di qualsiasi tipo all'apparecchio; ad esempio se il cavo
di alimentazione o la spina sono danneggiati, se è stato versato liquido o sono caduti oggetti
sull'apparecchio, se l'apparecchio è stato esposto a pioggia o umidità, se non funziona
normalmente o è caduto.
AVVISI/AVVERTENZE:
Questo simbolo sul prodotto segnala istruzioni importanti di funzionamento
e di manutenzione presenti in questa guida.
Questo simbolo sul prodotto indica la presenza di tensioni pericolose non
isolate all'interno del telaio del prodotto e del conseguente rischio di scosse
elettriche.
AVVERTIMENTO: Tutti i prodotti Bose devono essere installati in conformità con gli
standard locali, statali, federali e di settore. È responsabilità dell’installatore assicurare che
l’installazione dei diusori e del sistema di montaggio venga eseguita in conformità con le
normative vigenti, compresi i regolamenti edilizi locali. Prima di installare il prodotto, chiedere
informazioni all’autorità locale preposta.
AVVERTIMENTO: L’installazione non sicura o la sospensione di carichi pesanti può causare
gravi lesioni alle persone e danni alle cose. È responsabilità dell’installatore valutare
l’adabilità del metodo di installazione utilizzato per l’applicazione specifica. L’installazione di
un diusore in posizione elevata può essere adata solo ad installatori professionisti esperti
di tecniche di montaggio sicuro dell’hardware.
AVVERTIMENTO: Per ridurre il rischio di incendio o scosse elettriche, questo prodotto NON
deve essere esposto a pioggia, liquidi o umidità.
AVVERTIMENTO: Non posizionare il prodotto in punti dove potrebbe formarsi condensa.
AVVERTIMENTO: Questo prodotto non deve essere installato o utilizzato in aree di servizio o
intrattenimento vicine all’acqua (ad esempio, piscine coperte, parchi acquatici al chiuso, sale
con vasche riscaldate, saune, bagni turchi e piste di pattinaggio al chiuso).
AVVERTIMENTO: NON apportare alterazioni non autorizzate al prodotto.
AVVERTIMENTO: NON utilizzare all’interno di veicoli o imbarcazioni.
AVVERTIMENTO: Utilizzare questo prodotto esclusivamente con l’alimentatore fornito in
dotazione.
AVVERTIMENTO: La spina dell'alimentazione o dell'accoppiatore deve essere raggiungibile
facilmente e rapidamente se utilizzata come dispositivo di spegnimento.
AVVERTIMENTO: Dotare la presa di messa a terra oppure accertarsi che la stessa sia dotata di
messa a terra di protezione prima di collegare la spina di alimentazione.
AVVERTIMENTO: I cavi per diusori e di interconnessione forniti in dotazione con questo
sistema non sono approvati per l’installazione all’interno di muri. Consultare le norme locali
per l’edilizia per individuare i tipi di cavi richiesti per l’installazione all’interno di muri.
AVVERTIMENTO: NON esporre prodotti contenenti batterie a calore eccessivo (ad esempio
luce diretta del sole, fuoco o simili).
AVVERTIMENTO: La batteria in dotazione al prodotto può determinare il rischio di incendi o
ustioni chimiche se non utilizzata correttamente.
AVVERTIMENTO: Contiene pezzi di piccole dimensioni che possono rappresentare un pericolo
di soocamento. Non adatto per bambini di età inferiore a 3 anni.
AVVERTIMENTO: Non utilizzare solventi a base di idrocarburi, lubrificanti o detergenti di
qualunque tipo su o intorno ai diusori Bose e sui relativi hardware di montaggio durante
l’installazione. L’impiego di detergenti, lubrificanti e solventi a base di idrocarburi su o intorno
a viti ed elementi di ancoraggio può danneggiare i materiali plastici e provocare spaccature e
danni prematuri del prodotto.
ATTENZIONE: Tenere il prodotto lontano dal fuoco e da fonti di calore. NON collocare sorgenti
di fiamme libere (ad esempio, candele accese) sul prodotto o in prossimità di esso.
ATTENZIONE: Utilizzare esclusivamente l’hardware di montaggio raccomandato dal
produttore dell’unità rack.
ATTENZIONE: A causa dei requisiti di ventilazione, Bose sconsiglia di posizionare il prodotto in
spazi chiusi o angusti, ad esempio nicchie a parete o armadietti.
ATTENZIONE: Non posizionare o installare la staa o il prodotto in prossimità di fonti di
calore, quali caminetti, termosifoni, radiatori o altri apparati (inclusi amplificatori) che
emettano calore.
Informazioni sulle normative
CAN ICES-3(A)/NMB-3(A)
Questo prodotto è conforme alle specifiche canadesi ICES-003 di Classe A.
Questo dispositivo è conforme alla parte 15 delle Norme FCC e agli standard Industry Canada RSS
esenti da licenza. Il funzionamento è soggetto alle due seguenti condizioni: (1) il dispositivo non
può causare interferenze dannose e (2) deve accettare le interferenze ricevute, incluse quelle che
potrebbero causare un funzionamento indesiderato del dispositivo.
Nota: Questa apparecchiatura è stata sottoposta a collaudo ed è risultata conforme ai limiti relativi
ai dispositivi digitali di Classe A previsti dalla Parte 15 delle norme FCC. Tali limiti sono stati fissati
allo scopo di assicurare un'adeguata protezione da interferenze nocive quando l'apparecchiatura è
utilizzata in un'installazione commerciale. Questa apparecchiatura genera, utilizza e può irradiare
energia a radiofrequenza e, se non installata e utilizzata in conformità con il manuale di istruzioni, può
causare interferenze con le locali comunicazioni radiofoniche. L'utilizzo di questa apparecchiatura in
un'area residenziale può provocare interferenze nocive, nel qual caso l'utente dovrà adottare misure
correttive a proprie spese.
Eventuali modifiche o alterazioni non espressamente approvate da Bose Corporation possono rendere
nulla l’autorizzazione dell’utente all’utilizzo dell’apparecchiatura stessa.
Prodotto di Classe A. In ambienti domestici, il prodotto può causare interferenze radio che potrebbero
richiedere misure adeguate da parte dell'utente..
Questo prodotto è conforme a tutte le direttive EU prescritte dalla legge. La dichiarazione
di conformità completa è disponibile all’indirizzo
www.Bose.com/compliance.
Il presente prodotto è conforme a tutte le normative sulla compatibilità elettromagnetica
del 2016 e a tutte le altre normative del Regno Unito applicabili. La dichiarazione di
conformità completa è disponibile all’indirizzo:
www.Bose.com/compliancewww.Bose.com/compliance
Questo simbolo indica che il prodotto non deve essere smaltito con i rifiuti domestici, ma
deve essere consegnato a una struttura di raccolta appropriata per il riciclaggio. Uno
smaltimento e un riciclo corretti aiutano a preservare le risorse naturali, la salute e
l'ambiente. Per ulteriori informazioni sullo smaltimento e sul riciclo di questo prodotto,
rivolgersi alle autorità locali, al servizio di smaltimento dei rifiuti o al negozio presso il
quale è stato acquistato.
Il prodotto è conforme a tutti i requisiti di immunità EN55103-2 per ambienti elettromagnetici di tipo E2.
La conformità alle normative richiede l'utilizzo di cavi schermati.
Specifiche
di prodotto: Tensione d’ingresso: 100 V CA – 240 V CA
Frequenza: 50/60 Hz
Valore di corrente o potenza: massimo 60 W
Corrente di spunto all’accensione iniziale: 20 A @ 120 V; 38 A @ 230 V
Data di produzione: l'ottava cifra del numero di serie corrisponde all'anno di produzione; ad esempio
"7" indica 2007 o 2017.
Importatore per la Cina: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9,
No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone
Importatore per l'UE: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, Paesi Bassi
Importatore per il Messico: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas
de Chapultepec, 11000 México, D.F. Per informazioni su importatori e servizi: +5255 (5202) 3545
Importatore per Taiwan: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei
City 104, Taiwan. N. telefono: +886-2-2514 7676
Sede principale di Bose Corporation: 1-877-230-5639
AMX è un marchio di AMX Corporation. Crestron® è un marchio registrato di Crestron Electronics, Inc.
Arm è un marchio registrato di Arm Limited (o delle sue consociate) negli Stati Uniti e/o in altri Paesi.
Dante™ è un marchio di Audinate Pty Ltd. Tutti gli altri marchi sono di proprietà dei rispettivi titolari.
©2022 Bose Corporation. Bose è un marchio commerciale di Bose Corporation. Nessuna parte di
questo documento può essere riprodotta, modificata, distribuita o usata in altro modo senza previa
autorizzazione scritta..
Informazioni sulla garanzia
Questo prodotto è coperto da una garanzia limitata.
Per i dettagli sulla garanzia, visitare PRO.BOSE.COM.
PRO.BOSE.COM
Installatie- en bedieningshandleiding EX-1280/440C/1280C/12AEC Nederlands 7
Belangrijke veiligheidsinstructies
Lees alle veiligheidsinstructies en de gebruiksaanwijzing door en bewaar
deze.
Dit product is uitsluitend bestemd voor installatie door professionele installateurs! Dit
document is bedoeld om professionele installateurs essentiële installatie- en veiligheidsrichtlijnen
te bieden voor dit product in standaardsystemen voor vaste installatie. Lees dit document en alle
veiligheidswaarschuwingen voordat u een systeem probeert te installeren.
Probeer dit product niet zelf te repareren. Neem voor alle onderhoud contact op met een geautoriseerd
servicecenter, installateur, technicus, dealer of distributeur. Om contact op te nemen met Bose Professional
en voor informatie over de dichtstbijzijnde dealer of distributeur, gaat u naar PRO.BOSE.COM.
Het productlabel bevindt zich aan de onderkant van het product.
Belangrijke veiligheidsinstructies
1. Lees deze instructies door.
2. Bewaar deze instructies.
3. Neem alle waarschuwingen in acht.
4. Volg alle instructies.
5. Gebruik dit apparaat niet in de buurt van water.
6. Alleen met een droge doek reinigen.
7. Zorg dat u de ventilatieopeningen niet blokkeert. Installeer het apparaat volgens de instructies
van de fabrikant.
8. Installeer het product niet in de buurt van warmtebronnen, zoals radiatoren, warmteroosters,
kachels of andere apparaten (waaronder versterkers) die warmte produceren.
9. Schakel de veiligheidsfunctie van de gepolariseerde of geaarde stekker niet uit. Een
gepolariseerde stekker heeft twee poten, waarvan de ene breder is dan de andere. Een geaarde
stekker heeft twee poten en een pin voor de aarding. De bredere poot of de derde poot is
bedoeld voor uw veiligheid. Als de bijgeleverde stekker niet in het stopcontact past, neem dan
contact op met een elektricien om het verouderde stopcontact te vervangen.
10. Zorg dat er niet op het netsnoer wordt gestaan of gelopen en dat het niet wordt afgekneld, met
name bij de stekkers en stopcontacten en het punt waar deze uit het apparaat komen.
11. Gebruik uitsluitend aansluitstukken/accessoires die door de fabrikant worden gespecificeerd.
12. Haal de stekker van dit apparaat uit het stopcontact bij onweer of als het langere tijd niet wordt
gebruikt.
13. Laat alle reparaties en onderhoud over aan bevoegde personen. Reparatie is vereist als het apparaat
is beschadigd, zoals wanneer het snoer of de stekker van de voeding is beschadigd, wanneer er
vloeistof in het apparaat is terechtgekomen of voorwerpen in het apparaat zijn gevallen, wanneer
het apparaat is blootgesteld aan regen of vocht, niet normaal werkt of is gevallen.
WAARSCHUWINGEN:
Dit symbool op het product betekent dat deze handleiding belangrijke
bedienings- en onderhoudsinstructies bevat.
Dit symbool op het product betekent dat er een niet-geïsoleerde,
gevaarlijke spanning aanwezig is binnen de behuizing van het product die
kan leiden tot een risico op elektrische schokken.
WAARSCHUWING: Alle Bose-producten moeten worden geïnstalleerd volgens de plaatselijke
en landelijke voorschriften en industrienormen. Het is de verantwoordelijkheid van de
installateur om ervoor te zorgen dat de installatie van de luidsprekers en het montagesysteem
gebeurt met inachtneming van alle van toepassing zijnde voorschriften, waaronder
plaatselijke bouwvoorschriften. Neem contact op met de juiste plaatselijke overheidsinstanties
voordat u dit product installeert.
WAARSCHUWING: Het onveilig monteren of ophangen van een zware last kan
leiden tot beschadiging van uw eigendommen, ernstig letsel en overlijden. Het is de
verantwoordelijkheid van de installateur om de betrouwbaarheid te evalueren van de
gebruikte montagemethode. Alleen professionele installateurs met kennis van het juiste
gereedschap en veilige montagetechnieken mogen luidsprekers hoog ophangen.
WAARSCHUWING: Om het risico op brand of elektrische schokken te verlagen, mag dit
product NIET worden blootgesteld aan regen, vloeistof of vocht.
WAARSCHUWING: Monteer het product niet op locaties waar condensatie kan optreden.
WAARSCHUWING: Dit product is niet bedoeld voor installatie of gebruik in overdekte
ruimten voor wateractiviteiten (waaronder overdekte zwembaden, overdekte waterparken,
stoomruimten, sauna’s, bubbelbadkamers en overdekte ijsbanen).
WAARSCHUWING: Er mogen GEEN wijzigingen aan dit product worden aangebracht door
onbevoegden.
WAARSCHUWING: Gebruik het NIET in voertuigen of boten.
WAARSCHUWING: Dit product mag alleen worden gebruikt met de bijgeleverde voeding.
WAARSCHUWING: Wanneer de stekker of aansluiting van een apparaat als
stroomonderbreker wordt gebruikt, dient deze stroomonderbreker steeds goed bereikbaar
te zijn.
WAARSCHUWING: Zorg voor aarding of controleer of het stopcontact geaard is voordat u de
stekker in het stopcontact steekt.
WAARSCHUWING: De bij dit systeem geleverde luidsprekerdraad en kabels zijn niet geschikt
voor montage in de muur. Raadpleeg de plaatselijke bouwvoorschriften voor het juiste type
bedrading en kabels voor installatie in een muur.
WAARSCHUWING: Producten die accu’s of batterijen bevatten NIET blootstellen aan
overmatige warmte (zoals direct zonlicht, vuur en dergelijke).
WAARSCHUWING: Onjuiste behandeling van de accu in dit product kan leiden tot een risico
op brand of chemische brandwonden.
WAARSCHUWING: Bevat kleine onderdelen die verstikkingsgevaar kunnen vormen. Niet
geschikt voor kinderen jonger dan 3 jaar.
WAARSCHUWING: Gebruik bij de installatie geen oplosmiddelen, smeermiddelen of
reinigingsmiddelen op koolwaterstofbasis op of rond Bose-luidsprekers en bijbehorende
montagematerialen. Het gebruik van dergelijke smeermiddelen, oplosmiddelen of
reinigingsmiddelen op koolwaterstofbasis op of rond de bevestigingsankers en schroeven kan
nadelige gevolgen hebben voor het kunststof materiaal en mogelijk scheuren en vroegtijdige
verzwakking van het product veroorzaken.
VOORZICHTIGHEID: Houd het product uit de buurt van vuur en warmtebronnen. Plaats GEEN
open vlammen, zoals brandende kaarsen, op of bij het product.
VOORZICHTIGHEID: Gebruik uitsluitend het door de fabrikant aanbevolen montagemateriaal.
VOORZICHTIGHEID: Omwille van de ventilatievereisten raadt Bose af om het product in een
besloten ruimte te plaatsen, zoals in een nis in de muur of een dichte kast.
VOORZICHTIGHEID: Plaats of installeer de beugel of het product niet in de buurt van
warmtebronnen, zoals open haarden, radiatoren, verwarmingsroosters of andere apparaten
(waaronder versterkers) die warmte produceren.
Wettelijk verplichte informatie
CAN ICES-3(A)/NMB-3(A)
Dit product voldoet aan de specificaties van de Canadese ICES-003 klasse A.
Dit apparaat voldoet aan deel 15 van de FCC-voorschriften en de RSS-norm(en) van Industry Canada voor
vergunningsvrije apparaten. Op het gebruik zijn de volgende twee voorwaarden van toepassing: (1) Dit
apparaat mag geen schadelijke storing veroorzaken, en (2) dit apparaat moet bestand zijn tegen alle externe
storing, waaronder storing die een ongewenste werking tot gevolg kan hebben.
Opmerking: Dit apparaat is getest en voldoet aan de limieten voor een digitaal apparaat van de klasse A,
volgens deel 15 van de FCC-voorschriften. Deze limieten zijn bedoeld om redelijke bescherming te bieden
tegen schadelijke storing bij installatie in een handelsomgeving. Dit apparaat genereert en gebruikt
radiofrequente energie en kan deze uitstralen en het kan, als het niet wordt geïnstalleerd en gebruikt volgens
de instructies, schadelijke storing veroorzaken aan radiocommunicatie. Gebruik van dit apparaat in een
woonwijk kan schadelijke storing veroorzaken. In dit geval moet de gebruiker de storing op eigen kosten
verhelpen.
Veranderingen of aanpassingen die niet uitdrukkelijk zijn goedgekeurd door Bose Corporation kunnen leiden tot
het vervallen van de bevoegdheid van de gebruiker om dit apparaat te gebruiken.
Dit is een product van klasse A. Dit product kan in een woonomgeving radio-interferentie veroorzaken, zodat
de gebruiker mogelijk passende maatregelen moet treen.
Dit product voldoet aan alle vereisten van de EU-richtlijnen, zoals wettelijk vereist. De volledige
conformiteitsverklaring kunt u vinden op www.Bose.com/compliance.
Dit product voldoet aan alle toepasselijke voorschriften in de Electromagnetic Compatibility
Regulations2016 en aan alle overige toepasselijke wet- en regelgeving van het Verenigd
Koninkrijk. De volledige conformiteitsverklaring kunt u vinden op:
www.Bose.com/compliancewww.Bose.com/compliance
Dit symbool betekent dat het product niet mag worden weggegooid als huishoudelijk afval en
naar een geschikt inzamelpunt voor recycling moet worden gebracht. Het op de juiste wijze
afvoeren en recyclen helpt natuurlijke hulpbronnen, de menselijke gezondheid en het milieu te
beschermen. Voor meer informatie over het afvoeren en recyclen van dit product neemt u
contact op met de gemeente waar u woont, de afvalverwerkingsdienst of de winkel waar u dit
product hebt gekocht.
Dit product voldoet aan alle immuniteitsvereisten van EN55103-2 voor een E2 elektromagnetische omgeving.
Afgeschermde kabels zijn vereist om aan de regelgeving te voldoen.
Productvermogen: Ingangsspanning: 100 VAC – 240 VAC
Frequentie: 50/60 Hz
Stroomsterkte: Maximaal 60 W
Initiële inschakelstroom: 20 A bij 120 V; 38 A bij 230 V
Fabricagedatum: Het achtste cijfer in het serienummer geeft het fabricagejaar aan. ‘7’ is 2007 of 2017.
Importeur in China: Bose Electronics (Shanghai) Company Limited, Level 6, Tower D, No. 2337 Gudai Rd.
Minhang District, Shanghai 201100
Importeur in het VK: Bose Limited, Bose House, Quayside Chatham Maritime, Chatham, Kent, ME44QZ,
United Kingdom
Importeur in de EU: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, Nederland
Importeur in Mexico: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec,
11000 México, D.F. Gegevens importeur en service-informatie: +52 55 52 02 35 45
Importeur in Taiwan: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road,
Taipei City 104, Taiwan. Telefoonnummer: +886 2 25 14 76 76
Hoofdkantoor Bose Corporation: 1 877 230 5639
AMX is een handelsmerk van AMX Corporation. Crestron® is een geregistreerd handelsmerk van Crestron
Electronics, Inc. Arm is een geregistreerd handelsmerk van Arm Limited (of diens gelieerde ondernemingen)
in de VS en/of elders. Dante™ is een handelsmerk van Audinate Pty Ltd. Alle overige handelsmerken zijn het
eigendom van hun respectieve eigenaars.
©2022 Bose Corporation. Bose is een handelsmerk van Bose Corporation. Niets in deze uitgave mag worden
gereproduceerd, gewijzigd, gedistribueerd of op andere wijze worden gebruikt zonder voorafgaande
schriftelijke toestemming.
Garantie-informatie
Dit product wordt gedekt door een beperkte garantie.
Ga naar PRO.BOSE.COM voor garantie-informatie.
8 English EX-1280/440C/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
Contents
Table of Contents
Overview ..........................................................9
Package Contents .................................................................... 9
Available Accessories ............................................................10
EX-1280 ......................................................................................... 11
Front Panel .......................................................................... 11
Rear Panel ............................................................................ 11
EX-440C ...................................................................................... 12
Front Panel ......................................................................... 12
Rear Panel ........................................................................... 12
EX-1280C ..................................................................................... 13
Front Panel ......................................................................... 13
Rear Panel ........................................................................... 13
EX-12AEC ....................................................................................14
Front Panel .........................................................................14
Rear Panel ...........................................................................14
Installation ......................................................15
1. Downloading & Installing ControlSpace Designer . 15
2. Rack-mounting ....................................................................15
3. Analog Audio Connections.............................................16
4. AmpLink Connection ........................................................16
5. Dante Network Connection ............................................ 17
6. Far-end Connections......................................................... 17
VoIP........................................................................................ 17
Telephone ............................................................................ 17
Soft Codecs ........................................................................ 17
7. Control Connections .......................................................... 18
GPIO ......................................................................................18
General-purpose Inputs ......................................... 18
General-purpose Outputs ..................................... 18
Serial ......................................................................................19
CC-16 .....................................................................................19
8. Power Connection .............................................................. 19
9. Configuration with ControlSpace Designer .............19
Operation ..................................................... 20
Display Menus & Pages ........................................................20
Main Menu ..........................................................................20
DANTE INPUTS Page ....................................................20
LOCAL INPUTS & OUTPUTS Pages .......................... 21
AmpLink Page ................................................................... 21
DANTE OUTPUTS Page ................................................ 22
VoIP/Ph/USB Page ......................................................... 22
CONFIG Menu ................................................................... 22
NETWORK SETTINGS – CS Page ..................... 23
NETWORK SETTINGS – VoIP Page .................. 23
Dante Info Page .......................................................24
Firmware Versions Page ....................................... 24
Design File Info page ............................................. 25
DISPLAY SETTINGS Page .................................... 25
Maintenance ..................................................26
Firmware & Software Upgrades .......................................26
Troubleshooting ......................................................................26
Technical Information .................................. 28
Technical Specifications .......................................................28
EX-1280 ...............................................................................28
EX-440C .............................................................................30
EX-1280C ............................................................................ 32
EX-12AEC ............................................................................ 34
Telecom Compliance ............................................................. 35
FCC Compliance Statement ....................................... 35
Overview
English 9Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
Overview
Package Contents
The product carton includes the following items, varying by model. Inspect all components for shipping
damage and contact your Bose representative if you find any issues.
Item EX-1280 EX-440C EX-1280C EX-12AEC
ControlSpace EX processor 1 1 1 1
Power cord 1 1 1 1
Euroblock connector
(green, 6 pins,
analog audio input)
6 2 6 0
Euroblock connector
(orange, 6 pins,
analog audio output)
4 2 4 0
Euroblock connector
(green, 6 pins,
general-purpose input)
1 0 1 0
Euroblock connector
(green, 2 pins,
general-purpose input)
0 1 0 0
Euroblock connector
(orange, 6 pins,
general-purpose output)
1 0 1 0
Euroblock connector
(black, 3 pins, serial) 1 1 1 0
Euroblock connector
(black, 3 pins, CC-16) 1 0 1 0
Cable ties 16 616 0
Installation guide 1 1 1 1
Overview
10 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
Available Accessories
The EX-1280, EX-440C, EX-1280C, and EX-12AEC processors are compatible with the Bose controllers and
endpoints listed below as well as Bose ControlSpace Remote and controllers by other manufacturers such as
Crestron® and AMX®.
Model Part Number Notes
ControlSpace EX-4ML mic/GPIO
Dante endpoint
PC 771783 Uses Dante port. Requires EX Endpoint Power
Supply (PC 800446) or Power-over-Ethernet
(PoE) switch.
ControlSpace EX-8ML mic/GPIO
Dante endpoint
PC 772045 Uses Dante port. Requires EX Endpoint Power
Supply (PC 800446) or Power-over-Ethernet
(PoE) switch.
ControlSpace EX-UH USB/Headset
Dante endpoint
PC 771784 Uses Dante port. Requires EX Endpoint Power
Supply (PC 800446) or Power-over-Ethernet
(PoE) switch.
ControlSpace CC-64 control center PC 041760 Provides network control of any Bose
networkable hardware.
ControlSpace CC-16 zone controller PC 041761 Uses CC-16 port. Up to 15 devices can be used
with the EX-1280 and EX-1280C.
ControlSpace ControlCenter CC-1D PC 079059 (US, white)
PC 079051 (US, black)
PC 079042 (EU, white)
PC 079070 (EU, black)
PC 079062 (JP, white)
PC 079060 (JP, black)
Uses Network port. Requires additional
Power-over-Ethernet (PoE) switch.
ControlSpace ControlCenter CC-2D PC 079063 (US, white)
PC 079043 (US, black)
PC 079071 (EU, white)
PC 079049 (EU, black)
PC 079066 (JP, white)
PC 079046 (JP, black)
Uses Network port. Requires additional
Power-over-Ethernet (PoE) switch.
ControlSpace ControlCenter CC-3D PC 079061 (US, white)
PC 079047 (US, black)
PC 079053 (EU, white)
PC 079058 (EU, black)
PC 079041 (JP, white)
PC 079064 (JP, black)
Uses Network port. Requires additional
Power-over-Ethernet (PoE) switch.
Overview
English 11Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
EX-1280
Front Panel
q Power/Status indicator: This LED illuminates white when the processor is powered on. The LED may blink
white or change colors while the system is booting up. If the LED illuminates and remains red after the
bootup is complete, please see Maintenance > Troubleshooting (page 26).
w OLED Display: This display provides metering and network information and settings. See Operation
(page 20) for more information.
e Rotary/Press Knob: Turn and press this knob to navigate menus. See Operation (page 20) for more
information.
Rear Panel
q Analog audio inputs: 12 balanced audio inputs (3.81 mm, 6-pin Euroblock), routable to automatic echo
cancellation (AEC) using ControlSpace Designer software. See Installation > 3. Analog Audio Connections
(page 16) for more information.
w Analog audio outputs: 8 balanced audio outputs (3.81 mm, 6-pin Euroblock). See Installation >
3. Analog Audio Connections (page 16) for more information.
e Control Inputs: 5 inputs for general-purpose control (3.81 mm, 6-pin Euroblock). See Installation >
7. Control Connections > GPIO > General-purpose Inputs (page 18) for more information.
r Control Outputs: 5 outputs for general-purpose control (3.81 mm, 6-pin Euroblock). See Installation >
7. Control Connections > GPIO > General-purpose Outputs (page 18) for more information.
t Dante ports: 2 Ethernet ports for connection of Dante digital audio devices. See Installation >
5. Dante Network Connection (page 17) for more information.
y Micro-B USB port: Connect this port to a computer for use with soft codecs with stereo input and output.
See Installation > 6. Far-end Connections > Soft Codecs (page 17) for more information.
u USB port: Not currently supported. Available for future updates to ControlSpace EX-1280.
i AmpLink Out port: RJ-45 connection for use with AmpLink-equipped amplifiers. See Installation >
4. AmpLink Connection (page 16) for more information.
o Serial port: 3-wire RS-232C (DTE) connection (3.81 mm, 3-pin Euroblock) to serial control interface. See
Installation > 7. Control Connections > Serial (page 19) for more information.
a CC-16 port: 3-wire RS-485 connection (3.81 mm, 3-pin Euroblock) to Bose CC-16 zone controller or other
control interfaces. See Installation > 7. Control Connections > CC-16 (page 19) for more information.
s Power input: Power cord connection to AC mains power (IEC 60320-C14 inlet). See Installation >
8. Power Connection (page 19) for more information.
y i ou stq q q rw e aw
q ew
Overview
12 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
EX-440C
Front Panel
q Power/Status indicator: This LED illuminates white when the processor is powered on. The LED may blink
white or change colors while the system is booting up. If the LED illuminates and remains red after the
bootup is complete, please see Maintenance > Troubleshooting (page 26).
w OLED Display: This display provides metering and network information and settings. See Operation
(page 20) for more information.
e Rotary/Press Knob: Turn and press this knob to navigate menus. See Operation (page 20) for more
information.
Rear Panel
q Analog audio inputs: 4 balanced audio inputs (3.81 mm, 6-pin Euroblock), routable to automatic echo
cancellation (AEC) using ControlSpace Designer software. See Installation > 3. Analog Audio Connections
(page 16) for more information.
w Analog audio outputs: 4 balanced audio outputs (3.81 mm, 6-pin Euroblock). See Installation >
3. Analog Audio Connections (page 16) for more information.
e Control Inputs: 2 inputs for general-purpose control (3.81 mm, 6-pin Euroblock). See Installation >
7. Control Connections > GPIO > General-purpose Inputs (page 18) for more information.
r Dante ports: 2 Ethernet ports for connection of Dante digital audio devices. See Installation >
4. Dante Network Connection (page 17) for more information.
t VoIP port: RJ-45 port for communication via Voice-over-Internet-Protocol (SIP 2.0-compliant).
See Installation > 6. Far-end Connections > VoIP (page 17) for more information.
y Micro-B USB port: Connect this port to a computer for use with soft codecs with stereo input and output.
See Installation > 6. Far-end Connections > Soft Codecs (page 17) for more information.
u AmpLink Out port: RJ-45 connection for use with AmpLink-equipped amplifiers. See Installation >
4. AmpLink Connection (page 16) for more information.
i Serial port: 3-wire RS-232C (DTE) connection (3.81 mm, 3-pin Euroblock) to serial control interface.
See Installation > 7. Control Connections > Serial (page 19) for more information.
o Telephone Line port: RJ-11 connection for analog telephone line. See Installation > 6. Far-end Connections
> Telephone (page 17) for more information.
a Power input: Power cord connection to AC mains power (IEC 60320-C14 inlet). See Installation >
8. Power Connection (page 19) for more information.
y u aoitrq ew
q ew
Overview
English 13Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
EX-1280C
Front Panel
q Power/Status indicator: This LED illuminates white when the processor is powered on. The LED may blink
white or change colors while the system is booting up. If the LED illuminates and remains red after the
bootup is complete, please see Maintenance > Troubleshooting (page 26).
w OLED Display: This display provides metering and network information and settings. See Operation
(page 20) for more information.
e Rotary/Press Knob: Turn and press this knob to navigate menus. See Operation (page 20) for more
information.
Rear Panel
q Analog audio inputs: 12 balanced audio inputs (3.81 mm, 6-pin Euroblock), routable to automatic echo
cancellation (AEC) using ControlSpace Designer software. See Installation > 3. Analog Audio Connections
(page 16) for more information.
w Analog audio outputs: 8 balanced audio outputs (3.81 mm, 6-pin Euroblock). See Installation >
3. Analog Audio Connections (page 16) for more information.
e Control Inputs: 5 inputs for general-purpose control (3.81 mm, 6-pin Euroblock). See Installation >
7. Control Connections > GPIO > General-purpose Inputs (page 18) for more information.
r Control Outputs: 5 outputs for general-purpose control (3.81 mm, 6-pin Euroblock). See Installation >
7. Control Connections > GPIO > General-purpose Outputs (page 18) for more information.
t Dante ports: 2 Ethernet ports for connection of Dante digital audio devices. See Installation >
5. Dante Network Connection (page 17) for more information.
y VoIP port: RJ-45 port for communication via Voice-over-Internet-Protocol (SIP 2.0-compliant).
See Installation > 6. Far-end Connections > VoIP (page 17) for more information.
u Micro-B USB port: Connect this port to a computer for use with soft codecs with stereo input and output.
See Installation > 6. Far-end Connections > Soft Codecs (page 17) for more information.
i USB port: Not currently supported. Available for future updates to ControlSpace EX-1280C.
o AmpLink Out port: RJ-45 connection for use with AmpLink-equipped amplifiers. See Installation >
4. AmpLink Connection (page 16) for more information.
a Serial port: 3-wire RS-232C (DTE) connection (3.81 mm, 3-pin Euroblock) to serial control interface.
See Installation > 7. Control Connections > Serial (page 19) for more information.
s Telephone Line port: RJ-11 connection for analog telephone line. See Installation > 6. Far-end Connections
> Telephone (page 17) for more information.
d CC-16 port: 3-wire RS-485 connection (3.81 mm, 3-pin Euroblock) to Bose CC-16 zone controller or other
control interfaces. See Installation > 7. Control Connections > CC-16 (page 19) for more information.
f Power input: Power cord connection to AC mains power (IEC 60320-C14 inlet). See Installation >
8. Power Connection (page 19) for more information.
y u o ai f
stq q q rwe dw
q ew
Overview
14 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
EX-12AEC
Front Panel
q Power/Status indicator: This LED illuminates white when the processor is powered on. The LED may blink
white or change colors while the system is booting up. If the LED illuminates and remains red after the
bootup is complete, please see Maintenance > Troubleshooting (page 26).
w OLED Display: This display provides metering and network information and settings. See Operation
(page 20) for more information.
e Rotary/Press Knob: Turn and press this knob to navigate menus. See Operation (page 20) for more
information.
Rear Panel
q Dante ports: 2 Ethernet ports for connection of Dante digital audio devices. See Installation >
5. Dante Network Connection (page 17) for more information.
w Power input: Power cord connection to AC mains power (IEC 60320-C14 inlet). See Installation >
8. Power Connection (page 19) for more information.
q ew
wq
Installation
English 15Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
Installation
Follow the steps below when setting up a ControlSpace EX-1280, EX-440C, EX-1280C, or EX-12AEC for the
first time. See the following sections for additional information about each step.
Note: Due to the dierences between the models, some of the installation steps may apply to certain models
and not to others.
1. Download and install the ControlSpace Designer software.
2. Mount the processor in a rack.
3. Make analog audio connections.
4. Connect an AmpLink-enabled amplifier.
5. Make Dante network connections.
6. Make far-end connections.
7. Make remote control and GPIO connections.
8. Connect the processor to a power outlet.
9. Configure the processor using ControlSpace Designer software.
1. Downloading & Installing ControlSpace Designer
Download and install ControlSpace Designer software to a computer (Windows only) on the same local
subnet as the processor. Visit PRO.BOSE.COM to download the latest software version, which includes
product firmware, the latest algorithms, and a detailed help system to guide system designers and installers
through configuring the processor for use in high-quality audio systems.
2. Rack-mounting
The processor is designed to fit standard 19-inch (48-centimeter) rack equipment, occupying one rack unit
(1RU) in height, and requires a mounting depth of 10.5 inches (26.7 centimeters) from the front rack rail. Use
four fasteners with washers (not included) to mount the processor.
The product uses two variable-speed fans and can safely operate in ambient conditions from 0 °C to 40 °C
(32 °Fto104 °F). Refer to the Technical Information > Technical Specifications (page 28) for power
dissipation ratings.
CAUTION: Only use the mounting hardware recommended by the rack manufacturer.
CAUTION: Due to ventilation requirements, ensure proper enclosure ventilation if the unit is installed in an
enclosed space such as a cabinet or credenza.
Installation
16 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
3. Analog Audio Connections
The EX-1280, EX-440C, and EX-1280C include balanced dual-channel (3.81 mm pitch) Euroblock connectors
for analog audio connections. The termination end of each connector includes printed terminal block
descriptions.
4. AmpLink Connection
If you are using a Bose AmpLink-enabled amplifier, connect the AmpLink port (RJ-45) on
the EX-1280, EX-440C, or EX-1280C to the amplifier’s AmpLink port using a shielded
Cat 5 cable.
CAUTION: Shielded EIA/TIA 568B straight Cat 5 cable, or equivalent, is required for proper
AmpLink operation. Unshielded cable is not supported and may cause AmpLink audio to
operate improperly.
The EX-440C transmits on the first four AmpLink channels. The EX-1280 and EX-1280C
transmit on the first eight AmpLink channels. Select the corresponding channels on the
amplifier using the amplifiers rear-panel switch settings.
Source Device Connector Euroblock Input Connector
RCA
Phone Plug
(Balanced)
XLR
Phone Plug
(Unbalanced)
Installation
English 17Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
5. Dante Network Connection
The rear panel of the processor includes two Dante network ports (Primary and
Secondary), which provide input and output channels of low-latency digital audio using
Dante audio networking technology. These ports can be configured for switched (default),
redundant, isolated, or filtered network connections using Dante Controller by Audinate.
The EX-1280 and EX-1280C support 64 input channels and 64 output channels.
The EX-440C and EX-12AEC support 16 input channels and 16 output channels.
You can use these same network ports to control and configure the processor while using
ControlSpace Designer software. Connect the proper Dante port to a computer either
directly or through an Ethernet switch. Ensure that the computer is on the same subnet as
the processor using one of the following three methods:
Set the computer to DHCP and connect a DHCP server to the network. Both the
processor and the computer will obtain an IP address from the DHCP server.
Set the computer to DHCP and without a DHCP server. Both the processor and the
computer will obtain an AutoIP-assigned IP address.
Set the computer to a static IP address and use the processor's front-panel display and
knob to assign the processor a static address on the same subnet.
For more information, see the help system for ControlSpace Designer.
The control and audio signals for each type of network connection are configured in the
following way for each port:
Connection Primary Port Secondary Port
Switched* D/C D/C
Legacy* D/C C
Redundant* D/C D
Isolated D C
6. Far-end Connections
CAUTION: To reduce the risk of fire, use only No.26AWG (0.41mmØ / 0.13mm2)
or larger telecommunication line cord.
ATTENTION: Pour réduire les risques d’incendie, utilizer uniquement des conducteurs
de télécommunications 26 AWG (0.41mmØ / 0.13mm2) au de section supérleure.
VoIP
Use a Cat 5 cable to connect the VoIP port (RJ-45) on the EX-440C or EX-1280C to a
compatible session-initiation-protocol (SIP) IP private branch exchange (PBX).
For information on configuring the VoIP connection, see the help system for ControlSpace
Designer.
Telephone
Use a RJ-11 cable to connect the Telephone Line port on the EX-440C or EX-1280C to an
analog telephone line.
Soft Codecs
Use a USB cable to connect the micro-B USB port on the EX-1280, EX-440C, or EX-1280C to
a computer. You can use soft codecs (with EX-440C or EX-1280C) or PC applications (with
EX-1280) with stereo input and output over this connection.
* Connect only 1 Cat 5 cable
to the same network
D: Dante audio
C: ControlSpace control
Installation
18 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
7. Control Connections
The rear panels of the EX-1280, EX-440C, and EX-1280C include various connections for compatible controllers:
The EX-1280, EX-440C, and EX-1280C include general-purpose connections (Control Inputs or Control
Outputs) for external control hardware.
The EX-1280, EX-440C, and EX-1280C include a RS-232 port (Serial) for connecting industry-standard
serial control systems.
The EX-1280 and EX-1280C include an RS-485 port (CC-16) for compatible Bose controllers.
GPIO
Use the rear-panel general-purpose input/output (GPIO) connections to interface the processor with external
control hardware.
The EX-1280 and EX-1280C include five general-purpose inputs and five general-purpose outputs.
The EX-440C includes one general-purpose input.
General-purpose Inputs
General-purpose control input ports are used to connect external hardware such as potentiometers (to
control levels or gains) and switches (to set logic states). Use ControlSpace Designer to easily assign
functions to these external controls.
Using Switches
Both toggle switches and
pushbuttons can be used with
control inputs. Each input
terminal is tied to an internal two-
kiloohm pull-up resistor so that
external switches can be wired
directly from input to ground.
Using Potentiometers
10 kiloohm potentiometers can be
connected and associated with
control gain blocks in a system
design. Inputs are compatible
(through ControlSpace Designer)
with linear-taper potentiometers
wired for minimum resistance at
the fully clockwise position or
at the fully counter-clockwise
position.
Current Source Devices
Some devices such as LEDs
and low-current relays can be
powered directly from control
outputs. A maximum source
current of 10 milliamps is
available.
Source Limits: 8 VDC,
10 mA (max.)
Current Sink Devices
Devices that require more current
than is available from a current-
source configuration can use
control outputs to sink up to
100 milliamps when used with
external power supplies. Use
proper precautions when driving
inductive loads.
Sink Limits: 100 mA (max.).
External supplies must be
24 VDC.
General-purpose Outputs
Installation
English 19Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
Serial
Using the included 3-pin Euroblock connector, connect industry-standard RS-232 control
systems to the Serial port on the EX-1280, EX-440C, or EX-1280C.
The 3-pin connector on the processor corresponds to a DB-9 connector pinouts as follows:
Serial Port DB-9 Connector Pinout
Tx Pin 2 (Receive Data)
Rx Pin 3 (Transmit Data)
(Ground) Pin 5 (Ground)
CC-16
Using the included 3-pin Euroblock connector, connect a Bose ControlSpace CC-16 zone
controller to the CC-16 port on the EX-1280 or EX-1280C. For more information on how to
wire these connections, see the CC-16 installation guide available at PRO.BOSE.COM.
You can network up to 15 CC-16 zone controllers to control the EX-1280, EX-1280C, or any
device on the Bose ControlSpace control network. An external power supply is required.
In addition to wiring the A and B terminals, we recommend connecting the ground terminal
from the CC-16 port EX-1280 or EX-1280C to each CC-16 zone controller. The maximum
recommended distance between the processor and any CC-16 is 610 meters (2,000 feet).
8. Power Connection
The processor can operate with AC mains line voltages from 100volts to 240 volts at
50Hz/60 Hz over a detachable IEC power cord. Power consumption is 37 volt-amps at an
ambient temperature of 40 °C (104 °F).
To power on the processor, use the included power cord to connect the processor's power
inlet to a power outlet. After powering on, the boot time may be as long as 40 seconds. The
processor is fully operable when the Power/Status LED on the front panel is lit solid white.
Note: Make all audio and network connections before connecting the power cord.
9. Configuration with ControlSpace Designer
If all the network connections and settings are configured correctly, ControlSpace Designer
will automatically identify the processor on the network.
To scan and update the processor's firmware, use the Hardware Manager tool in
ControlSpace Designer. Once Up-to-Date appears as the Status for the processor, proceed
with your system design using ControlSpace Designer.
For details on using ControlSpace Designer to configure, control, and monitor the processor
or entire systems built with Bose networked system electronics, see the help system for
ControlSpace Designer.
Operation
20 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
Operation
Display Menus & Pages
The processor's front-panel display shows several
menus and pages that can be used to view and
change network settings, display metering for any
audio input or output, and change display settings.
This section describes each menu item and the
options. The menu layouts and available options vary
by processor model where indicated.
To select an item, turn the knob until the item is
highlighted in the display.
To open the selected item, push the knob.
To return to the Main menu, turn the knob counter-
clockwise until it appears.
Main Menu
The Main menu oers six options. Selecting an option
opens the corresponding page or menu. See the
following sections to learn more about each one.
DANTE INPUT: The DANTE INPUTS page.
LOCAL IN/OUT: The LOCAL INPUTS and LOCAL
OUTPUTS pages (EX-1280, EX-440C, and
EX-1280C only).
AMPLink: The AmpLink page (EX-1280, EX-440C,
and EX-1280C only).
DANTE OUTPUT: The DANTE OUTPUTS page.
VoIP/Phone/USB: The VoIP/Ph/USB page
(EX-1280, EX-440C, and EX-1280C only).
CONFIG: The CONFIG menu.
DANTE INPUTS Page
The DANTE INPUTS page displays audio levels (-60 dBu
to +24 dBu) for each available Dante input channel.
Channels 1–32 appear on the first page. To view
Channels 33–64, turn the knob clockwise.
The EX-440C and EX-12AEC use Channels 1–16.
The EX-1280 and EX-1280C use Channels 1–64.
Operation
English 21Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
LOCAL INPUTS & OUTPUTS Pages
The local inputs appear on the first page.
The EX-440C uses Channels 1–4.
The EX-1280 and EX-1280C use Channels 1–12.
To view the local outputs, turn the knob clockwise.
The EX-440C uses Channels 1–4.
The EX-1280 and EX-1280C use Channels 1–8.
The LOCAL INPUTS page displays the following
information for analog Input Channels 1–12:
Audio level (-60 dBu to +24 dBu).
PH POWER: An open circle indicates that there is
no phantom power applied to the corresponding
input channel. A closed circle indicates that
phantom power is applied to the corresponding
input channel. Use ControlSpace Designer to
apply or remove phantom power to or from each
channel.
MUTE: An open circle indicates that the
corresponding input channel is not muted. A
closed circle indicates that the corresponding
input channel is muted. Use ControlSpace Designer
to set the mute status for each channel.
The LOCAL OUTPUTS page displays the following
information for analog Output Channels 1–8:
Audio level (-60 dBu to +24 dBu).
POLARITY: A plus (+) symbol indicates a positive
polarity. A minus (−) symbol indicates a negative
polarity. Use ControlSpace Designer to set the
polarity of each channel.
MUTE: An open circle indicates that the
corresponding output channel is not muted. A
closed circle indicates that the corresponding
output channel is muted. Use ControlSpace
Designer to set the mute status for each channel.
AmpLink Page
The AmpLink page displays audio levels (-60 dBu to
+24 dBu) for AmpLink Output Channels 1–8.
The EX-440C uses Channels 1–4.
The EX-1280 and EX-1280C use Channels 1–8.
Operation
22 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
DANTE OUTPUTS Page
The DANTE OUTPUTS page displays audio levels
(-60 dBu to +24 dBu) for each available Dante output
channel.
Channels 1–32 appear on the first page. To view
Channels 33–64, turn the knob clockwise.
The EX-440C and EX-12AEC use Channels 1–16.
The EX-1280 and EX-1280C use Channels 1–64.
VoIP/Ph/USB Page
The VoIP/Ph/USB page displays audio levels (-60 dBu
to +24 dBu) for the following channels:
VoIP > I/O–1: VoIP Input/Output Channel 1
(EX-440C and EX-1280C only).
VoIP > I/O–2: VoIP Input/Output Channel 2
(EX-1280C only).
Ph > I/O: Phone Input/Output (EX-440C and
EX-1280C only).
USB > L/R-IN: USB Left/Right In (EX-1280,
EX-440C, and EX-1280C only).
USB > L/R-OUT: USB Left/Right Out (EX-1280,
EX-440C, and EX-1280C only).
CONFIG Menu
The CONFIG menu oers six options. Selecting
an option opens the corresponding page. See the
following sections to learn more about each page.
CS NETW SETTINGS: The NETWORK SETTINGS –
CS page.
VoIP NETW SETTINGS: The NETWORK SETTINGS
– VoIP page (EX-440C and EX-1280C only).
DANTE INFO: The Dante Info page.
VERSION INFO: The Firmware Versions page.
DESIGN FILE INFO: The Design File Info page.
DISPLAY SETTINGS: The DISPLAY SETTINGS page.
To return to the CONFIG menu from each of its pages,
turn the knob counter-clockwise until the arrow in
the upper-left corner of the display is selected, and
then press the knob. You will be prompted to save or
discard any changes you have made on the page.
To discard your changes, turn the knob to select NO
(the default), and then press the knob.
To save the changes you made, turn the knob to select
YES, and then press the knob. Your changes will be
saved, and the processor will reboot automatically.
Operation
English 23Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
CONFIG > NETWORK SETTINGS – CS Page
The CS NETW SETTINGS page displays ControlSpace
network settings, some of which you can edit.
To select an setting, turn the knob until an arrow
appears next to the setting's name.
To edit the selected setting, press the knob.
To confirm the selected setting after editing it, press
the knob.
The ControlSpace network settings are:
MODE: The IP mode, which you can set to DHCP or
STATIC.
IP ADDRESS: The processor's IP address, which
you can set by address block. Turn the knob to
move between the four address blocks.
SUBNET MASK: The processor's subnet mask
address, which you can set by address block. Turn
the knob to move between the four address blocks.
GATEWAY: The processor's gateway address,
which you can set by address block. Turn the knob
to move between the four address blocks.
MAC ADDRESS: The processor's MAC address. You
cannot edit this setting.
CONFIG > NETWORK SETTINGS – VoIP Page
The VoIP NETW SETTINGS page displays VoIP network
settings, some of which you can edit. This is available
on the EX-440C and EX-1280C only.
To select an setting, turn the knob until an arrow
appears next to the setting's name.
To edit the selected setting, press the knob.
To confirm the selected setting after editing it, press
the knob.
The VoIP network settings are:
MODE: The IP mode, which you can set to DHCP or
STATIC.
IP ADDRESS: The IP address of the processor's
VoIP card, which you can set by address block. Turn
the knob to move between the four address blocks.
SUBNET MASK: The subnet mask address of
the processor's VoIP card, which you can set by
address block. Turn the knob to move between the
four address blocks.
GATEWAY: The gateway address of the processor's
VoIP card, which you can set by address block. Turn
the knob to move between the four address blocks.
MAC ADDRESS: The MAC address of the
processor's VoIP card. You cannot edit this setting.
VLAN: The optional VLAN number.
Operation
24 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
CONFIG > Dante Info Page
The Dante Info page displays settings that correspond
to what is displayed in the Dante controller software.
You cannot edit these settings.
The settings are:
IP: The IP address of the processor's Dante card.
MAC ADDRESS: The MAC address of the
processor's VoIP card.
Ch Num: The number of available Dante channels
(inputs × outputs).
MODE: The current Dante device network
configuration. You can use ControlSpace Designer
to set this to SWITCHED, LEGACY, REDUNDANT,
or ISOLATED. See the help system for
ControlSpace Designer to learn about these modes.
ID: The name of the product.
Device: The assigned name of the Dante device.
You can use ControlSpace Designer or the Dante
controller to set this name.
Fact Model: The version number of the processor's
boot ROM.
Fact SW: The version number of the processor's
Bose software.
Fact FW: The version number of the processor's
Bose firmware.
SW: The version number of the processor's
Audinate Dante software.
FW: The version number of the processor's
Audinate Dante firmware.
CONFIG > Firmware Versions Page
The Firmware Versions page displays the version
numbers of the software and/or firmware for these
components of the processor:
FW: The processor's firmware.
DSP: The processor's software that manages its
digital signal processing.
AEC: The processor's software that manages its
acoustic echo cancellation (EX-440C, EX-1280C,
and EX-12AEC only).
PSTN: The processor's software that manages its
PSTN functions (EX-440C and EX-1280C only).
Dante: The processor's software that manages its
Dante network functions.
Kernel: The processor's operating system kernel.
VoIP: The processor's software that manages its
VoIP functions (EX-440C and EX-1280C only).
Num Ch: The number of available Dante channels
(inputs × outputs).
Operation
English 25Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
CONFIG > Design File Info page
The Design File Info page displays the following
information about the most recent ControlSpace
Designer design file uploaded to the processor:
Device Name: The device name. You can set this in
the design file in ControlSpace Designer.
Last Upload: The date and time the most recent
design file was uploaded.
File Size: The size of the most recently uploaded
design file.
RTC Master?: Indication of whether or not this
device is the real-time control (RTC) master for
the system. You can set this in the design file in
ControlSpace Designer.
CONFIG > DISPLAY SETTINGS Page
The DISPLAY SETTINGS page displays information
about the front-panel display, which you can edit.
To select an setting, turn the knob until an arrow
appears next to the setting's name.
To edit the selected setting, press the knob.
To confirm the selected setting after editing it, press
the knob.
The display settings are:
Display auto-shuto: The time (in minutes)
that the processor's front-panel display must be
inactive before turning o (this does not aect the
processor's normal operation).
Brightness: The brightness of the front-panel
display.
Maintenance
26 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
Maintenance
Firmware & Software Upgrades
Bose periodically releases updates of the ControlSpace Designer software. Please check PRO.BOSE.COM for
these software updates.
For information on how to update the firmware for the processor, see the help system for ControlSpace
Designer.
Troubleshooting
Problem Solution
The processor cannot
power on.
Use the included power cord to connect the processor's power inlet (on the rear
panel) to a power outlet.
Verify that the mains power is active.
The power is on, but
there is no sound.
Verify that there is an input signal from the source using ControlSpace Designer.
The audio input metering should be in the green/yellow band.
Verify that there is an output signal. The audio output signal metering should be
in the green/yellow band.
The sound is distorted. Using ControlSpace Designer, verify that the audio input signal indicator blocks
are not showing solid red or flashing red. If they are, reduce the input pre-gain
setting to where the input is no longer clipping (red).
Using ControlSpace Designer, verify that the audio output signal indicator
blocks are not solid red or flashing red. If they are, and if the input indicators
are green, use ControlSpace Designer to reduce the output gain or any
intermediary gain in the signal path.
If the input and output indicators are green, and if you are sure the output
volume of the audio device is undistorted when it enters the system, verify that
the loudspeakers are not being overdriven and are not damaged.
The processor does
not appear on the
same network as the
computer when using
ControlSpace Designer.
Verify that the processor is fully booted. The Power/Status indicator on the
front panel should appear solid white.
Verify that the LAN settings on the TCP/IP Ethernet device you are using on the
computer are set correctly:
If you are not using a DHCP server, manually set the computer's IP address
to an unused IP address (e.g. 192.168.0.2).
The default IP subnet mask should be set to 255.255.255.0.
Open the firewall settings on the computer, and unblock all ports.
Open the Hardware Manager in ControlSpace Designer, and verify that the
proper Host Network Interface Card Name is selected.
Verify that there is not another device connected to the network with the same
IP address.
See the help system for ControlSpace Designer for detailed steps to ensure the
processor is on the same network as the computer.
Maintenance
English 27Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
Problem Solution
Power/Status indicator remains
red after booting.
This is most often the result of an incompatibility between the design
file and firmware version. To fix this, retrieve the saved design from
the processor (if you have not already saved it to your computer), and
then upload a blank design file to the processor. The Power/Status
indicator should change to white. Import the saved design file into the
latest version of ControlSpace Designer. After that, save the design
file, and then upload it to the processor.
The processor does not indicate
any network connectivity.
Verify the processor's ControlSpace port (on the rear panel) is
connected to the network.
Verify that the network activity LED built into the ControlSpace port
(on the rear panel) is lit or blinking to confirm an active network
connection.
The front-panel display shows
the NETWORK SETTINGS – CS
page with an unexpected IP
address of 169.x.x.x or 172.x.x.x.
If the processor's IP mode is set to DHCP when no DHCP server is on
the network, the processor will use these ranges by default. Add a
DHCP server to the network, or change the processor's IP address to a
static IP address.
A connected AmpLink-enabled
amplifier is not receiving
AmpLink audio signal from the
processor.
Verify that the connection cable is a shielded Cat 5 network cable,
and set the amplifier to receive AmpLink Channels 1–4 (EX-440C) or
Channels 1–8 (EX-1280 and EX-1280C).
The processor does not register
any Dante audio subscriptions
(connections) or audio signals.
Verify that the IP address of the processor’s Dante card is on the same
network as the processor’s ControlSpace control IP address. To do
this, view the Dante Info page (see page 24 for more information).
To change the IP address of the processor's Dante card, use
Audinate’s Dante Controller software. It can also be helpful to change
the computer's network settings from a static IP mode to a DHCP
mode to view and change the IP address of the Dante card.
Technical Information
28 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
Technical Information
Technical Specifications
EX-1280
Integrated DSP
Signal Processor 32-bit fixed/floating-point DSP 456 MHz/Arm Cortex-A8 600 MHz
Maximum Calculation 3.6 GIPS / 2.7 GFLOPS
Delay 43 s
Audio Latency 1.05 ms (analog in to analog out)
A/D & D/A Converters 24-bit
Sample Rate 48 kHz
Analog Audio Inputs
Input Channels 12 balanced, mic/line level
Input Connectors 3.81 mm, 6-pin Euroblock
Input Impedance 12 kΩ at 1 kHz (with or without phantom power active)
Maximum Input Level +24 dBu
Equivalent Input Noise −118 dB at 44 dB gain setting
Phantom Power +48 VDC, 10 mA, selectable per input
Gain Settings 0/+14/+24/+32/+44/+54/+64 dB
Analog Audio Outputs
Output Channels 8 balanced, line-level
Output Connectors 3.81 mm, 6-pin Euroblock
Output Impedance 200 Ω
Maximum Output Level +24 dBu
Audio Performance
Frequency Response 20 Hz to 20 kHz (+0.5 dB/−0.5 dB)
THD+N 0.01% at +4 dBu (A-weighted, 20 Hz to 20 kHz)
Channel Separation (Crosstalk) < −105 dB at +4 dBu input & output level, 1 kHz
Dynamic Range > 115 dB, A-weighted, 20 Hz to 20 kHz, analog input to analog output
Audio Over IP
Dante 64 × 64, primary/secondary
Digital Audio Outputs
AmpLink (output only) 8 ultra-low latency (< 21 μs), 48 kHz; requires shielded Cat 5 cable
Communication Ports
USB Device Micro-B type, stereo in/out, HID support
USB Host Type A; for future use
Technical Information
English 29Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
Control Inputs
Inputs & Connectors 5 analog or digital inputs, 2 kΩ internal pull-up resistor to 5 V, 3.81 mm,
6-pin Euroblock
Voltage Range Analog Inputs: 0 V to 3.3 V (maximum: 5 V)
Digital Inputs: 0 V to 3.3 V (threshold voltage: 1.6 V)
Control Outputs
Outputs & Connectors 5 digital outputs, 3.81 mm, 6-pin Euroblock
Output Voltage High: 8 V (open circuit), 2.5 V at 10 mA
Low: < 1 V at 100 mA, push-pull
Indicators & Controls
Display 256 × 64 OLED with rotary/push encoder
LED Status Indicators Power/Status
Audio Signal Indication On display
Electrical
Mains Voltage 100 VAC to 240 VAC, 50/60 Hz
AC Power Consumption 35 W typical at 40 °C (104 °F) ambient
Mains Connector IEC 60320-C14 (inlet)
Power Dissipation 60 W (205 BTU, 52 kcal)
Physical
Dimensions (H × W × D) 44 mm × 483 mm × 282 mm (1.7 in × 19.0 in × 11.1 in)
Net Weight 3.2 kg (7.1 lb)
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Cooling System 2 variable-speed fans, side venting
General
PC Configuration Software ControlSpace Designer
Network Control Ethernet (RJ-45), 1 Gbps
RS-232/485 Ports RS-232 (DTE) & Bose CC-16 (RS-485 master); 3.81 mm, 3-pin Euroblock
Technical Information
30 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
EX-440C
Integrated DSP
Signal Processor/CPU 32-bit fixed/floating-point DSP 456 MHz/Arm Cortex-A8 600 MHz
Maximum Calculation 3.6 GIPS / 2.7 GFLOPS
Delay 43 s
Audio Latency 1.05 ms (analog in to analog out, without AEC)
A/D & D/A Converters 24-bit
Sample Rate 48 kHz
Acoustic Echo Cancellation
Tail Length 480 ms
Noise Reduction 32 dB
Latency 50 ms
Channels 8
References 4
Analog Audio Inputs
Input Channels 4 balanced, mic/line level
Input Connectors 3.81 mm, 6-pin Euroblock
Input Impedance 12 kΩ at 1 kHz (with or without phantom power active)
Maximum Input Level +24 dBu
Equivalent Input Noise −118 dB at 44 dB gain setting
Phantom Power +48 VDC, 10 mA, selectable per input
Gain Settings 0/+14/+24/+32/+44/+54/+64 dB
Analog Audio Outputs
Output Channels 4 balanced, line-level
Output Connectors 3.81 mm, 6-pin Euroblock
Output Impedance 200 Ω
Maximum Output Level +24 dBu
Audio Performance
Frequency Response 20 Hz to 20 kHz (+0.5 dB/−0.5 dB)
THD+N 0.01% at +4 dBu (A-weighted, 20 Hz to 20 kHz)
Channel Separation (Crosstalk) < −105 dB at +4 dBu input & output level, 1 kHz
Dynamic Range > 115 dB, A-weighted, 20 Hz to 20 kHz, analog input to analog output
Technical Information
English 31Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
Audio Over IP
Dante 16 × 16, primary/secondary, routable to AEC
Digital Audio Outputs
AmpLink (output only) 4 ultra-low latency (< 21 μs), 48 kHz; requires shielded Cat 5 cable
Communication Ports
USB Device Micro-B type, stereo in/out, HID support
VoIP RJ-45; 1 line
PSTN RJ-11; 1 line, Tx/Rx
Control Inputs
Inputs & Connectors 1 analog or digital input, 2 kΩ internal pull-up resistor to 5 V, 3.81 mm,
2-pin Euroblock
Voltage Range Analog Inputs: 0 V to 3.3 V (maximum: 5 V)
Digital Inputs: 0 V to 3.3 V (threshold voltage: 1.6 V)
Indicators & Controls
Display 256 × 64 OLED with rotary/push encoder
LED Status Indicators Power/Status
Audio Signal Indication On display
Electrical
Mains Voltage 100 VAC to 240 VAC, 50/60 Hz
AC Power Consumption 35 W typical at 40 °C (104 °F) ambient
Mains Connector IEC 60320-C14 (inlet)
Power Dissipation 60 W (205 BTU, 52 kcal)
Physical
Dimensions (H × W × D) 44 mm × 483 mm × 282 mm (1.7 in × 19.0 in × 11.1 in)
Net Weight 3.2 kg (7.1 lb)
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Cooling System 2 variable-speed fans, side venting
General
PC Configuration Software ControlSpace Designer
Network Control Ethernet (RJ-45), 1 Gbps
RS-232/485 Ports RS-232 (DTE); 3.81 mm, 3-pin Euroblock
Technical Information
32 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
EX-1280C
Integrated DSP
Signal Processor 32-bit fixed/floating-point DSP 456 MHz/Arm Cortex-A8 600 MHz
Maximum Calculation 3.6 GIPS / 2.7 GFLOPS
Delay 43 s
Audio Latency 1.05 ms (analog in to analog out, without AEC)
A/D & D/A Converters 24-bit
Sample Rate 48 kHz
Analog Audio Inputs
Input Channels 12 balanced, mic/line level
Input Connectors 3.81 mm, 6-pin Euroblock
Input Impedance 12 kΩ at 1 kHz (with or without phantom power active)
Maximum Input Level +24 dBu
Equivalent Input Noise −118 dB at 44 dB gain setting
Phantom Power +48 VDC, 10 mA, selectable per input
Gain Settings 0/+14/+24/+32/+44/+54/+64 dB
Analog Audio Outputs
Output Channels 8 balanced, line-level
Output Connectors 3.81 mm, 6-pin Euroblock
Output Impedance 200 Ω
Maximum Output Level +24 dBu
Audio Performance
Frequency Response 20 Hz to 20 kHz (+0.5 dB/−0.5 dB)
THD+N 0.01% at +4 dBu (A-weighted, 20 Hz to 20 kHz)
Channel Separation (Crosstalk) < −105 dB at +4 dBu input & output level, 1 kHz
Dynamic Range > 115 dB, A-weighted, 20 Hz to 20 kHz, analog input to analog output
Audio Over IP
Dante 64 × 64, primary/secondary
Digital Audio Outputs
AmpLink (output only) 8 ultra-low latency (< 21 μs), 48 kHz; requires shielded Cat 5 cable
Communication Ports
USB Device Micro-B type, stereo in/out, HID support
VoIP RJ-45; 2 lines, 2 instances per line
PSTN RJ-11; 1 line, Tx/Rx
USB Host Type A; for future use
Technical Information
English 33Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
Control Inputs
Inputs & Connectors 5 analog or digital inputs; 2 kΩ internal pull-up resistor to 5 V, 3.81 mm,
6-pin Euroblock
Voltage Range Analog Inputs: 0 V to 3.3 V (maximum: 5 V)
Digital Inputs: 0 V to 3.3 V (threshold voltage: 1.6 V)
Control Outputs
Outputs & Connectors 5 digital outputs, 3.81 mm, 6-pin Euroblock
Output Voltage High: 8 V (open circuit), 2.5 V at 10 mA
Low: < 1 V at 100 mA, push-pull
Indicators & Controls
Display 256 × 64 OLED with rotary/push encoder
LED Status Indicators Power/Status
Audio Signal Indication On display
Electrical
Mains Voltage 100 VAC to 240 VAC, 50/60 Hz
AC Power Consumption 35 W typical at 40 °C (104 °F) ambient
Mains Connector IEC 60320-C14 (inlet)
Power Dissipation 60 W (205 BTU, 52 kcal)
Physical
Dimensions (H × W × D) 44 mm × 483 mm × 282 mm (1.7 in × 19.0 in × 11.1 in)
Net Weight 3.6 kg (7.3 lb)
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Cooling System 2 variable-speed fans, side venting
General
PC Configuration Software ControlSpace Designer
Network Control Ethernet (RJ-45), 1 Gbps
RS-232/485 Ports RS-232 (DTE) & Bose CC-16 (RS-485 master); 3.81 mm, 3-pin Euroblock
Technical Information
34 English EX-440C/1280/1280C/12AEC Installation & Operation Guide
PRO.BOSE.COM
EX-12AEC
Integrated DSP
Signal Processor 32-bit fixed/floating-point DSP 456 MHz/Arm Cortex-A8 600 MHz
Maximum Calculation 3.6 GIPS / 2.7 GFLOPS
Delay 43 s
Sample Rate 48 kHz
Acoustic Echo Cancellation
Tail Length 480 ms
Noise Reduction 32 dB
Latency 50 ms
Channels 12
References 4
Audio Over IP
Dante 16 × 16, primary/secondary, routable to AEC
Indicators & Controls
Display 256 × 64 OLED with rotary/push encoder
LED Status Indicators Power/Status
Audio Signal Indication On display
Electrical
Mains Voltage 100 VAC to 240 VAC, 50/60 Hz
AC Power Consumption 35 W typical at 40 °C (104 °F) ambient
Mains Connector IEC 60320-C14 (inlet)
Power Dissipation 60 W (205 BTU, 52 kcal)
Physical
Dimensions (H × W × D) 44 mm × 483 mm × 282 mm (1.7 in × 19.0 in × 11.1 in)
Net Weight 2.4 kg (5.3 lb)
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Cooling System 2 variable-speed fans, side venting
General
PC Configuration Software ControlSpace Designer
Network Control Ethernet (RJ-45), 1 Gbps
Technical Information
English 35Installation & Operation Guide EX-440C/1280/1280C/12AEC
PRO.BOSE.COM
Telecom Compliance
FCC Compliance Statement
For United States Users
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the
bottom side of this equipment is a label that contains, among other information, a product identifier in the format
US:JUBBR01AEX-440C (for EX-440C) or US:JUBBR01AEX-1280C (for EX-1280C). If requested, this number must
be provided to the telephone company. The information associated with the services the equipment is to be
connected are REN: 0.1A, Jack type: RJ-11C.
The REN is useful to determine the number of devices that you may connect to your telephone line and still have
all of those devices ring when your telephone number is called. In most, but not all areas, the sum of RENs of all
devices connected to one line should not exceed five (5.0). To be certain of the number of devices that you may
connect to your line, you may want to contact your local telephone company to determine the maximum REN
for your calling area. For products approved after July 23, 2001, the REN for this product is part of the product
identifier that has the format US:JUBBR01AEX-440C (for EX-440C) or US:JUBBR01AEX-1280C (for EX-1280C). The
digits represented by 01A are the REN without a decimal point (e.g., 01A is a REN of 0.1A). For earlier products, the
REN is separately shown on the label.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
This equipment may not be used on coin service provided by the telephone company. Connection to party lines is
subject to state taris.
Should this equipment cause harm to the telephone network, the telephone company may discontinue your
service temporarily. If possible they will notify you in advance that temporary discontinuance of service may be
required. But if advance notice isn’t practical, the telephone company will notify you as soon as possible. You will be
informed of your right to file a complaint with the FCC. The telephone company may make changes in its facilities,
equipment, operations or procedures that could aect the proper functioning of your equipment. If they do, you
will be notified in advance to give you an opportunity to maintain uninterrupted telephone service.
This product is not intended to be repaired. If you experience trouble with this equipment, please contact:
Name: Bose Corporation
Address: 100 The Mountain Rd., Framingham, MA, 01701 U.S.A.
Telephone: (877) 428-2673
The telephone company may ask that you disconnect this equipment from the network until the problem has been
corrected or until you are sure that the equipment is not malfunctioning.
According to the FCC’s electrical safety advisory, we recommend that you may install an AC surge arrestor in
the AC outlet to which this equipment is connected. Telephone companies report that electrical surges, typically
lightning transients, are very destructive to customer terminal equipment connected to AC power sources and that
this is a major nationwide problem.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this
equipment Model EX-440C or EX-1280C does not disable your alarm equipment. If you have questions about what
will disable alarm equipment, consult your telephone company or a qualified installer.
For Canadian Users
This product meets the applicable Innovation, Science
and Economic Development Canada technical
specifications.
The Ringer Equivalence Number (REN) indicates the
maximum number of devices allowed to be connected
to a telephone interface. The termination of an interface
may consist of any combination of devices subject only
to the requirement that the sum of the RENs of all the
devices not exceed five.
This Class A digital apparatus complies with Canadian
ICES-003.
For China RoHS
Compliance:
Pour les utilisateurs canadiens
Le présent matériel est conforme aux spécifications
techniques applicables d’Industrie Canada.
L’indice d’équivalence de la sonnerie (IES) sert à indiquer
le nombre maximal de terminaux qui peuvent être
raccordés à une interface téléphonique. La terminaison
d’une interface peut consister en une combinaison
quelconque de dispositifs, à la seule condition que la
somme d’indices d’équivalence de la sonnerie de tous les
dispositifs n’excède pas 5.
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
©2022 Bose Corporation, All rights reserved.
Framingham, MA 01701-9168 USA
PRO.BOSE.COM
All trademarks are the property of their respective owners
AM788755 Rev. 03
May 2022
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Bose Professional EX-1280 Installatie gids

Categorie
Aanvullende muziekapparatuur
Type
Installatie gids