Samsung LE46B650T2W Handleiding

Merk: Samsung

Model: LE46B650T2W

Categorie: Lcd-tv's

Type: Handleiding

BN68-02325A-04

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country Customer Care Centre Web Site

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at

BELGIUM

02 201 2418 www.samsung.com/be

www.samsung.com/be_fr

CZECH REPUBLIC

800 - SAMSUNG (800-726786) www.samsung.com/cz

Distributor pro Českou republiku:

Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8

DENMARK 8 - SAMSUNG (7267864) www.samsung.com/dk

EIRE 0818 717 100 www.samsung.com/ie

FINLAND 30 - 6227 515 www.samsung.com/

FRANCE 01 4863 0000 www.samsung.com/fr

GERMANY 01805 - SAMSUNG (7267864, € 0.14/Min) www.samsung.de

HUNGARY 06 - 80 - SAMSUNG (7267864) www.samsung.com/hu

ITALIA 800 - SAMSUNG (7267864) www.samsung.com/it

LUXEMBURG 02 261 03 710 www.samsung.com/lu

NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl

NORWAY 3 - SAMSUNG (7267864) www.samsung.com/no

POLAND

0 801 1SAMSUNG(172678)

022 - 607 - 93 - 33

www.samsung.com/pl

PORTUGAL 808 20 - SAMSUNG (7267864) www.samsung.com/pt

SLOVAKIA 0800 - SAMSUNG (7267864) www.samsung.com/sk

SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es

SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se

SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) www.samsung.com/ch

U.K 0845 SAMSUNG (7267864) www.samsung.com/uk

BELARUS 810-800-500-55-500 -

TURKEY 444 77 11 www.samsung.com/tr

ESTONIA 800-7267 www.samsung.com/ee

LATVIA 8000-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.com/lt

BELARUS 810-800-500-55-500 -

KAZAHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

KYRGYZSTAN 00-800-500-55-500 -

RUSSIA 8-800-555-55-55 www.samsung.ru

TADJIKISTAN 8-10-800-500-55-500 -

UKRAINE 8-800-502-0000

www.samsung.com/ua

www.samsung.com/ua_ru

UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model Serial No.

BN68-02325A-04L09-Cover.indd 1 2009-10-08 �� 10:16:59

Digital TV Notice

1. Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital

terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cable-

TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-

C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric

Programme Guide), VOD (Video on Demand) and so on, are not included in this specification. So, they cannot be workable at

this moment.

Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T

digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.

Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a

service and you may be required to agree to terms and conditions of their business.

Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some

cable service providers.

For more information, please contact your local Samsung customer care centre.

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen

Do not display still image and partially still on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and

contrast of the screen when displaying a still image.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the

left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or

a game console may cause a similar effect to the screen. Damages caused by the above effect are not

covered by the Warranty.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To

prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

❑

●

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays

DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand

(VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com

with this code to complete the registration process and learn more about DivX VOD.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and specications may be changed without notice.

License

TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is

incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of

Dolby Laboratories.

DivX® Certified to play DivX® video, including premium content.

❑

BN68-02325A-04Eng.indb 1 2009-10-08 �� 9:53:17

English - 1

Symbol

N O T

Note One-Touch Button TOOLS Button Press

❑

SETTING UP YOUR TV

Accessories ....................................................................................... 2

Viewing the Control Panel ................................................................. 2

Viewing the Connection Panel ........................................................... 3

Viewing the Remote Control .............................................................. 5

Installing Batteries in the Remote Control ......................................... 6

Viewing the menus ............................................................................ 6

Placing Your Television in Standby Mode .......................................... 7

Plug & Play Feature (depending on the model) ................................. 7

Viewing the Display ........................................................................... 8

CHANNEL

Channel Menu ................................................................................... 8

Managing Channels .........................................................................11

PICTURE

Conguring the Picture Menu .......................................................... 13

Viewing Picture-in-Picture................................................................ 16

Using Your TV as a Computer (PC) Display .................................... 17

SOUND

Conguring the Sound Menu ........................................................... 18

Setting up the TV with your PC........................................................ 18

Selecting the Sound Mode .............................................................. 20

SETUP

Conguring the Setup Menu ............................................................ 20

Setting the Time ............................................................................... 23

Network Connection ........................................................................ 24

Setting the Network ......................................................................... 26

INPUT / SUPPORT

Input Menu ....................................................................................... 29

Support Menu .................................................................................. 29

MEDIA PLAY (USB & DLNA)

Connecting a USB Device ............................................................... 32

Media Play Function ........................................................................ 33

Sorting the Photo / Music / Movie List ............................................. 34

Photo / Music / Movie List Option Menu .......................................... 35

Slide Show / Music Play / Movie Play Option Menu ....................... 36

Viewing a Photo or Slide Show........................................................ 37

Playing Music .................................................................................. 38

Playing a Movie File ........................................................................ 39

Using the Setup Menu ..................................................................... 41

MEDIA PLAY-DLNA

Setting the DLNA Network ............................................................... 42

Installing the DLNA Application ........................................................ 42

Using the DLNA Application ............................................................. 43

Using the DLNA Function ................................................................ 44

■

ANYNET

Connecting Anynet

Devices ........................................................... 45

Setting Up Anynet

..........................................................................

Switching between Anynet

Devices ............................................... 46

Recording ........................................................................................ 47

Listening through a Receiver (Home theatre) .................................. 47

Troubleshooting for Anynet

............................................................

CONTENT LIBRARY

Using the Content Library ................................................................ 49

Using the Contents .......................................................................... 49

Using the Content Management ...................................................... 50

INTERNET@TV

Getting Started with Internet@TV .................................................... 51

Editing Snippets in the Dock ............................................................ 53

Using the Prole Widget .................................................................. 53

Using the Yahoo!® Widget Gallery .................................................. 54

Using the Yahoo!® Weather Widget ................................................ 55

Using the Yahoo!® News Widget ..................................................... 55

Using the Yahoo!® Flickr Widget ..................................................... 56

Using the Yahoo!® Finance Widget ................................................. 56

Troubleshooting for internet@TV ..................................................... 57

Help Website ................................................................................... 57

INTERNET@TV

Getting Started with Internet@TV .................................................... 58

Setting up Internet@TV ................................................................... 58

Using the Internet@TV service ........................................................ 59

Troubleshooting for internet@TV ..................................................... 60

Help Website ................................................................................... 60

HOME NETWORK CENTRE

Home Network Centre ..................................................................... 61

Setting Up the Home Network Centre ............................................. 62

Using the Message Function ........................................................... 62

Using the Media Function ................................................................ 63

RECOMMENDATIONS

Teletext Feature ............................................................................... 64

Installing the Stand .......................................................................... 65

Disconnecting the Stand .................................................................. 66

Installing the Wall Mount Kit ............................................................ 66

Assembling the Cables .................................................................... 66

Anti-Theft Kensington Lock ............................................................. 66

Securing the Installation Space ....................................................... 67

Securing the TV to the Wall ............................................................. 67

Troubleshooting ............................................................................... 68

Specications .................................................................................. 71

GNU GENERAL PUBLIC LICENSE

END OF TERMS AND CONDITIONS

GNU Lesser General Public License (LGPL)

END OF TERMS AND CONDITIONS

LICENSE ISSUES

■

CONTENTS

English

BN68-02325A-04Eng.indb 1 2009-10-08 �� 9:53:17

English - 2

SETTING UP YOUR TV

Accessories

Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom Cleaning Cloth

Warranty Card / Safety Guide

(Not available in all locations)

Owner’s Instructions Programme CD

Holder-Wire Cable

(Depending on the model)

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

The items colour and shape may vary depending on the model.

Viewing the Control Panel

The product colour and shape may vary depending on the model.

The front panel buttons can be activated by touching it with your finger.

(POWER): Press to turn the TV on and off.

POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.

: Press to change channels. In the on-screen menu, use the

buttons as you would use the ▼ and ▲

buttons on the remote control.

: Press to increase or decrease the volume.

In the on-screen menu, use the

buttons as you would use the ◄ and ► buttons on the remote control.

6 5 4 37 21

6 54 37 2 1

BN68-02325A-04Eng.indb 2 2009-10-08 �� 9:53:20

English - 3

MENU: Press to see an on-screen menu of your TV’s features.

SOURCE

: Toggles between all the available input sources. In the on-screen menu, use this button as you would use the

ENTER

button on the remote control.

REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.

SPEAKERS

Viewing the Connection Panel

The product colour and shape may vary depending on the model.

1 COMPONENT IN

Connects Component video / audio.

2 HDMI IN 1, 2, 3(DVI), 4 / DVI AUDIO IN

Connects to the HDMI jack of a device with an HDMI output.

No sound connection is needed for an HDMI to HDMI connection.

What is HDMI?

HDMI (High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video

signals using a single cable.

The difference between HDMI and DVI is that the HDMI device is smaller than DVI’s one.

The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable

Box / Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an

older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 3(DVI) jack and the audio cables to the

DVI AUDIO IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player /

Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.

Use the HDMI IN 3(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter

(DVI to HDMI) for video connection and the DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable connection,

you must use the HDMI IN 3(DVI) jack.

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

3 PC IN [PC] / [AUDIO]

Connects to the video and audio output jacks on your PC.

If your PC supports an HDMI connection, you can connect this to the HDMI IN 1, 2, 3(DVI) or 4 terminal.

If your PC supports a DVI connection, you can connect this to the HDMI IN 3(DVI) / DVI AUDIO IN terminal.

4 ANT IN

Connects to an antenna or cable TV system.

•

890! 7 6

21 34 5

[TV Side Panel] [TV Rear Panel]

Power Input

BN68-02325A-04Eng.indb 3 2009-10-08 �� 9:53:21

English - 4

5 LAN

Connect a LAN cable to this port to connect to the Network.

6 KENSINGTON LOCK (depending on the model)

The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a

locking device, contact the dealer where you purchased the TV.

The location of the Kensington Lock may be different depending on its model.

(HEADPHONE)

Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the

built-in speakers will be disabled.

Using the sound function is restricted when connecting headphones to the TV.

Prolonged use of headphones at a high volume may damage your hearing.

You will not hear sound from the speakers when you connect headphones to the TV.

The headphone volume and TV volume are adjusted separately.

8 DIGITAL AUDIO OUT (OPTICAL)

Connects to a Digital Audio component such as a Home theatre receiver.

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV

and adjust the volume level with the system’s volume control.

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

When the receiver (home theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is

displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a

digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the

TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver. If you want to hear 5.1 channel audio,

connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an

Amplifier or Home Theatre, not the TV.

9 SERVICE

Connector for service only.

0 AUDIO OUT [R-AUDIO-L]

Connects to the audio input jacks on your Amplifier/Home theatre.

When an audio amplifier is connected to the AUDIO OUT [R-AUDIO-L] jacks: Decrease the volume of the TV and adjust the

volume level with the Amplifier’s volume control.

! EXT1, 2

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

In EXT Mode, DTV Out supports MPEG SD Video and Audio only.

Input/Output Specification

Connector

Input Output

Video Audio (L / R) RGB Video + Audio (L / R)

EXT 1 O O O Only TV or DTV output is available.

EXT 2 O O X Output you can choose.

@ AV IN [VIDEO] / [R-AUDIO-L]

Video and audio inputs for external devices, such as a camcorder or VCR.

# USB1(HDD) / USB2

Connector for software upgrades and Media Play, etc.

You can connect to Samsung’s network wirelessly using the ‘Samsung Wireless LAN Adapter’ (Sold separately).

For USB HDD, use the USB1(HDD) port.

$ COMMON INTERFACE Slot

When not inserting ‘CI(CI+) CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.

The pairing information containing a telephone number, ‘CI(CI+) CARD’ ID, Host ID and other information will be displayed

in about 2~3 minutes. If an error message is displayed, please contact your service provider.

When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating that

the channel list is now updated.

Depending on the model, a message requesting your Parental Lock password may appear when the CI card is

reinserted.

Depending on the model, even if the Parental Lock is set to Allow All a message requesting your password may appear

for adult (18 years and above) programmes.

You must obtain a ‘CI(CI+) CARD’ from a local cable service provider. Remove the ‘CI(CI+) CARD’ by carefully pulling it

out with your hands since dropping the ‘CI(CI+) CARD’ may cause damage to it.

Insert the ‘CI(CI+) CARD’ in the direction marked on it.

The place of the COMMON INTERFACE Slot may be different depending on its model.

‘CI(CI+) CARD’ is not supported in some countries, regions, broadcasting stations check with your authorized dealer.

The CI+ function is only applicable to LE********P model.

If you have some problems, please contact to service provider.



BN68-02325A-04Eng.indb 4 2009-10-08 �� 9:53:21

English - 5

Viewing the Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

The performance of the remote control may be affected by bright light.

The product colour and shape may vary depending on the model.

POWER: Turns the TV on and

off.

TV: Selects the TV mode directly.

NUMERIC BUTTONS: Press to

change the channel.

FAV.CH: Used to display

Favourites Channel Lists on the

screen.

: Press to increase or

decrease the volume.

SOURCE: Press to display

and select the available video

sources.

INFO: Press to display

information on the TV screen.

TOOLS: Use to quickly select

frequently used functions.

INTERNET@: Press to use

various internet services to

view useful information and

entertaining content.

COLOUR BUTTONS: Use these

buttons in the Channel list,

Internet@TV, Media Play menu,

etc.

CH LIST: Used to display

Channel Lists on the screen.

Use these buttons in the

Media Play and Anynet

modes.

(

∏

: This remote can be used

to control recording on Samsung

recorders with the Anynet

feature)

ON/OFF

: Pressing the

ON/OFF

light button toggles

between on and off. When the

remote control is on, and a button

is pressed on the remote control,

the remote control buttons will

be lit for a moment. (Using the

remote control with the

ON/OFF

light button set to

On will reduce the battery usage

time.)

PRE-CH: Enables you to return

to the previous channel you were

watching.

MUTE

: Press to temporarily

cut off the sound.

: Press to change

channels.

MENU: Displays the main on-

screen menu.

(

GUIDE: Electronic Programme

Guide (EPG) display

)

RETURN: Returns to the

previous menu

 UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTER

: Use to

select on-screen menu items and

change menu values.

EXIT: Press to exit the menu.

CONTENT: This function enables

you to view the Content Library.

MEDIA.P: Allows you to play

music files, pictures, and movies.

SUBT.: Digital subtitle display

AD: Audio Description selection.

Teletext Functions

: Exit from the Teletext

display

: Teletext mode selection

(LIST / FLOF)

: Teletext reveal

: Teletext size selection

Fastext topic selection

: Alternately select

Teletext, Double or Mix.

: Teletext store

: Teletext sub page

: Teletext next page

: Teletext previous page

: Teletext index

)

: Teletext hold

: Teletext cancel

CH LIST

GUIDEINFO

)

(

BN68-02325A-04Eng.indb 5 2009-10-08 �� 9:53:22

English - 6

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

Install two AAA size batteries.

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the

compartment.

Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the

remote control for a long time.

If the remote control doesn’t work, check the following:

Is the TV power on?

Are the plus and minus ends of the batteries reversed?

Are the batteries drained?

Is there a power outage or is the power cord unplugged?

Is there a special fluorescent light or neon sign nearby?

OPERATION

Viewing the menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.

How to operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

Press the MENU button.

The main menu appears on the screen. The menu’s left side has icons : Picture, Sound,

Channel, Setup, Input, Application, Support.

3. Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER

button to access the icon’s sub-menu.

Press the ▲ or ▼ button to select the icon’s submenu.

Press the ◄ or ► button to decrease or increase the value of a particular item. The

adjustment OSD may differ depending on the selected menu.

Press the ENTER

button to complete the configuration. Press the EXIT button to exit.

•

❑

MENU Button

Display the main on-screen menu.

ENTER

/ DIRECTION Button

Move the cursor and select an item.

Select the currently selected item.

Confirm the setting.

RETURN Button

Return to the previous menu.

EXIT

Exit the on-screen menu.

Mode :Standard ▶

Backlight :7

Contrast :95

Brightness :45

Sharpness :50

Colour :50

Tint(G/R) :G50/R50

AdvancedSettings

Picture

Mode :Standard

Backlight :7 ▶

Contrast :95

Brightness :45

Sharpness :50

Colour :50

Tint(G/R) :G50/R50

AdvancedSettings

PictureOptions

Picture

Move

Adjust

Enter

Return

▲

Backlight

▼

Help icon

BN68-02325A-04Eng.indb 6 2009-10-08 �� 9:53:22

English - 7

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you

wish to interrupt viewing temporarily (during a meal, for example).

Press the POWER

button on the remote control.

The screen is turned off and a standby indicator appears on your set.

To switch your set back on, simply press the POWER

button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to

unplug the set from the mains and aerial.

Plug & Play Feature (depending on the model)

When the TV is initially powered on, basic settings proceed automatically and subsequently.

Press the POWER button on the remote control.

You can also use the POWER

button on the TV.

The message Select the OSD Language. is displayed.

Press the ENTER

button. Select the appropriate language by pressing the ▲ or ▼

button. Press the ENTER

button to confirm your choice.

Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER

button.

We recommend setting the TV to Home Use mode for the best picture in your home

environment.

Store Demo mode is only intended for use in retail environments.

If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume

button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

Press the ENTER

button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER

button to

confirm your choice.

After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin

number.

When you input the PIN number, 0-0-0-0 is not available.

Press the ▲ or ▼ button to select Air or Cable, then press the ENTER

button.

Air: Air antenna signal.

Cable: Cable antenna signal.

Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER

button to select Start.

When setting the antenna source to Cable, a step appears allowing you to set a value for the digital channel search. For

more information, refer to Channel→AutoStore.

Digital & Analogue: Digital and Analogue channels. / Digital: Digital channels. / Analogue: Analogue channels.

The channel search will start and end automatically.

Press the ENTER

button at any time to interrupt the memorization process.

After all the available channels are stored, the message Set the Clock Mode. is displayed.

Press the ENTER

button. Press the ▲ or ▼ button to select Auto, then Press the ENTER

button.

If you select Manual, Set current date and time is displayed.

If you have received a digital signal, the time will be set automatically. If not, select Manual to set the clock.

The description for the connection method providing the best HD screen quality is displayed. Check the description and press

the ENTER

button.

Press the ◄ or ► button to select See Product Guide or Watch TV. Press the ENTER

button.

See Product Guide: You are moved to the Product Guide where you can view the introduction to the main functions of

your new HDTV.

Watch TV: You can watch the memorized channels.

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,

then press the ENTER

button.

Press the ENTER

button again to select Plug & Play.

Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0.

If you want to change PIN number, use the Change PIN function.

The Plug & Play feature is only available in the TV mode.

•

Plug&Play  ▶

MenuLanguage :English

Time

Broadcast

Security

Network

General

Setup

SelecttheOSDLanguage.

MenuLanguage :English  ▶

Enter

Plug&Play

BN68-02325A-04Eng.indb 7 2009-10-08 �� 9:53:23

English - 8

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

Press the INFO button to viewing the information.

Press the INFO button on the remote control. The TV will display the channel, the type of

sound, and the status of certain picture and sound settings.

▲, ▼: You can view other channel’s information. If you want to move to the currently

selected channel, press ENTER

button.

◄, ►: You can view the desired program’s information at the current channel.

Press the INFO button once more or wait approximately 10 seconds and the display

disappears automatically.

CHANNEL

Channel Menu

Country

Analogue Channel

You can change the country for analogue channels.

Digital Channel

You can change the country for digital channels.

The PIN number input screen appears. Enter your 4 digit PIN number.

Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated

programme numbers may not correspond to actual or desired programme numbers.

If a channel is locked using the Child Lock function, the PIN input window appears.

Air / Cable

Antenna source to memorize.

Digital & Analogue: Digital and Analogue channels.

Digital: Digital channels.

Analogue: Analogue channels.

When selecting Cable→Digital&Analogue or Cable→Digital:

Provide a value to scan for cable channels.

SearchMode→Full/Network/Quick

Quick

Network ID: Displays the network identification code.

Frequency: Displays the frequency for the channel. (Differs in each country)

Modulation: Displays available modulation values.

Symbol Rate: Displays available symbol rates.

Scans for all channels with active broadcast stations and stores them in the TV’s memory.

If you want to stop Auto Store, press the ENTER

button.

The Stop Auto Store? message will be displayed.

Select Yes by pressing the ◄ or ► button, then press the ENTER

button.

●

❑

■

❑

■

●

•

Country  ▶

AutoStore

ManualStore

CableSearchOptions

FullGuide

MiniGuide

DefaultGuide :FullGuide

ChannelList

Channel

DTV Air

abc1

18:00 ~ 6:00

18:11 Thu 6 Jan

Life On Venus Avenue

Unclassified

No Detaild Information

' Information

BN68-02325A-04Eng.indb 8 2009-10-08 �� 9:53:23

English - 9

Manual Store

Scans for a channel manually and stores it in the TV’s memory.

If a channel is locked using the Child Lock function, the PIN input window appears.

Digital Channel

Manual store for digital channels.

Digital Channel is only available in DTV mode.

Channel: Set the Channel number using the ▲, ▼ or number (0~9) buttons.

Frequency: Set the frequency using the number buttons.

Bandwidth: Set the bandwidth using the ▲, ▼ or number (0~9) buttons.

When it has finished, channels are updated in the channel list.

Analogue Channel

Manual store for analogue channel.

Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)

buttons.

ColourSystem→Auto/PAL/SECAM/NTSC4.43: Sets the colour system value using the ▲ or ▼ button.

SoundSystem→BG/DK/I/L: Sets the sound system value using the ▲ or ▼ button.

Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or

S (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.

You can also select the channel number directly by pressing the number (0~9) buttons.

If there is abnormal sound or no sound, reselect the sound standard required.

Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the

frequency range until the first channel or the channel that you selected is received on the screen.

Store (When you store the channel and associated programme number): Set to OK by pressing the ENTER

button.

Channel mode

P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position

numbers from P00 to P99. You can select a channel by entering the position number in this mode.

C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this

mode.

S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

Cable Search Option (depending on the country)

Sets additional search options such as the frequency and symbol rate for cable network searches.

Freq.Start (Frequency Start): Set the start frequency (Differs in each country).

Freq.Stop (Frequency Stop): Set the stop frequency (Differs in each country).

Modulation: Displays available modulation values.

Symbol Rate: Displays available symbol rates.

Full Guide / Mini Guide

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out

of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information

becomes available.

You can also display the guide menu simply by pressing the GUIDE button. (To configure the Default Guide, refer to the

descriptions.)

Full Guide

Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which

may be scrolled forwards or backwards in time.

Mini Guide

The information of each programme is displayed by each line on the current channel Mini Guide screen from the current

programme onwards according to the programme starting time order.

❑

■

●

■

●



❑

●

❑

■

BN68-02325A-04Eng.indb 9 2009-10-08 �� 9:53:23

English - 10

DefaultGuide→FullGuide/MiniGuide

You can decide whether to display either the Full Guide or the Mini Guide when the GUIDE button on the remote control is

pressed.

Channel List

For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions.

You can select these options by simply pressing the CH LIST button on the remote control.

Channel Mode

When press the P

button, Channels will be switched within the selected channel list.

Added Ch.

Channels will be switched within the memorized channel list.

Favourite Ch.

Channels will be switched within the favourite channel list.

Fine Tune

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store

operation. If the signal is weak or distorted, you may have to fine tune the channel manually.

Fine tuned channels that have been saved are marked with an asterisk ‘*’ on the right-hand side of the channel number in the

channel banner.

To reset the fine-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTER

button.

Only Analogue TV channels can be fine tuned.

Using the Full / Mini Guide

To... Then...

Watch a programme in the EPG list Select a programme by pressing the ▲, ▼, ◄, ► button.

Exit the guide Press the blue button.

If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTER

button is pressed again, press the

◄, ► button to select Cancel Schedules, the scheduling is cancelled with the clock icon gone.

View programme information Select a programme of your choice by pressing the ▲, ▼, ◄, ► button.

Then press the INFO button when the programme of your choice is

highlighted.

The programme title is on the upper part of the screen centre.

Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality

Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted

programme are included on the detailed information. ‘...’ will be appeared if the summary is long.

Toggle between the Full Guide and Mini Guide Press the red button repeatedly.

In Full Guide

Scrolls backwards quickly (24 hours).

Scrolls forwards quickly (24 hours).

Press the Green button repeatedly.

Press the Yellow button repeatedly.

❑

■

❑

FullGuide

Watch Information Page MiniGuide +24Hours Exit

DTVCable900ftn2:10Tue1Jun

FreshmenOnCampus

2:00-2:30

NoDetailedInformation

Today

2:00-3:00 3:00-4:00

MintExtra

Loaded

40withDynamiteMC

TheDistillery

SmashHits!Sunday

900ftn

901ITVPlay

902Kerrang!

903Kiss

904oneword

905Hits

▼

StreetHypn..

Kisstory

NoInformation

FreshmenO..

900

Watch Information Page FullGuide Exit

MiniGuide DTVCable900ftn

StreetHypnosis

BoozeBritain

2:00

2:30

5:00

FreshmenOnCampus

▼

BN68-02325A-04Eng.indb 10 2009-10-08 �� 9:53:24

English - 11

Managing Channels

Using this menu, you can add / delete or set favourites channels and use the programme guide for digital broadcasts.

All Channels

Shows all currently available channels.

Added Channels

Shows all added channels.

Favourites

Shows all favourite channels.

To select the favourites channels you have set up, press the FAV.CH button on the remote

control.

Programmed

Shows all current reserved programmes.

Select a channel in the All Channels, Added Channels or Favourites screen by pressing the ▲ / ▼ buttons, and pressing

the ENTER

button. Then you can watch the selected channel.

Using the Colour buttons with the Channel List

Red (Channel Type): Toggle between your TV, Radio, Data / Other and All.

Green (Zoom): Enlarges or shrinks a channel number.

Yellow (Select): Selects multiple channel lists. You can perform the add/delete or add to favourites/delete from favourites

function for multiple channels at the same time. Select the required channels and press the Yellow button to set all the

selected channels at the same time. The

mark appears to the left of the selected channels.

TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or Unlock), Timer

Viewing, Edit Channel Name, Edit Channel Number, Sort, Select All (or Deselect All), Auto Store menu. (The

Options menus may differ depending on the situation.)

Channel Status Display Icons

: An Analogue channel.

: A channel selected by pressing the Yellow button.

: A channel set as a Favourite.

(

: A programme currently being broadcast.

: A locked channel.

)

: A reserved programme

Channel List Option Menu (in All Channels / Added Channels / Favourites)

Press the TOOLS button to use the option menu.

Option menu items may differ depending on the channel status.

Add / Delete

You can delete or add a channel to display the channels you want.

All deleted channels will be shown on All Channels menu.

A gray-coloured channel indicates the channel has been deleted.

The Add menu only appears for deleted channels.

You can also delete a channel to the Added Channels or Favourites menu in the same

manner.

Add to Favourite / Delete from Favourite

You can set channels you watch frequently as favourites.

Press the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favourite by selecting Tools

→AddtoFavourite (or Delete from Favourite).

The “

” symbol will be displayed and the channel will be set as a favourite.

All favourite channels will be shown on Favourites menu.

■



•

■

AddedChannels

824UKTVGold

825UKTVstyle

1C--

2C--

3C--

4C--

5C--

6C--

7C--

8C--

All ChannelType Zoom Select

Tools

AllChannels

824UKTVGold

825UKTVstyle

1C--

2C--

3C--

4C--

5C--

6C--

7C--

8C--

All ChannelType Zoom Select

Tools

Delete

AddtoFavourite

Lock

TimerViewing

EditChannelName

Sort



BN68-02325A-04Eng.indb 11 2009-10-08 �� 9:53:25

English - 12

Lock / Unlock

You can lock a channel so that the channel cannot be selected and viewed.

This function is available only when the Child Lock is set to On.

The PIN number input screen appears. Enter your 4 digit PIN number.

The default PIN number of a new TV set is 0-0-0-0. You can change the PIN, by selecting Change PIN from the menu.

The “

” symbol will be displayed and the channel will be locked.

Timer Viewing

If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List;

even when you are watching another channel. To reserve a programme, set the current time first.

Only memorized channels can be reserved.

You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.

Reserving a programme will be shown in the Programmed menu.

Digital Programme Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears. You can

reserve a programme according to the procedures described above.

Edit Channel Name (analogue channels only)

Channels can labelled so that their call letters appear whenever the channel is selected.

The names of digital broadcasting channels are automatically assigned and cannot be renamed.

Edit Channel Number (digital channels only)

You can also edit the channel number by pressing the number buttons on the remote control.

Sort (analogue channels only)

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using

the auto store.

Select All / Deselect All

Select All: You can select all the channels in the channel list.

Deselect All: You can deselect all the selected channels.

You can only select Deselect All when there is a selected channel.

Auto Store

For detailed procedures on setting up options, refer to the ‘Channel Menu’ instructions.

If a channel is locked using the Child Lock function, the PIN input window appears.

Channel List Option Menu (in Programmed)

You can view, modify or delete a reservation.

Press the TOOLS button to use the option menu.

Change Info

Select to change a viewing reservation.

Cancel Schedules

Select to cancel a viewin`g reservation.

Information

Select to view a viewing reservation.

(You can also change the reservation information.)

Select All

Select all reserved programmes.

■

●

■

Programmed

1/1/2009

13:595TV1

)



18:592TV3

)

TheEqualizer

20:592TV3

)

McMillan&Wife

21:592TV3

)

M.Spillane’smike

All Zoom Select

Tools

Information

ChangeInfo

CancelSchedules

Information

SelectAll



BN68-02325A-04Eng.indb 12 2009-10-08 �� 9:53:25

English - 13

PICTURE

Configuring the Picture Menu

Mode

You can select the type of picture which best corresponds to your viewing requirements.

Press the TOOLS button to display the Tools menu. You can also set the picture mode by

selecting Tools→PictureMode.

Dynamic

Selects the picture for increased definition in a bright room.

Standard

Selects the picture for the optimum display in a normal environment.

Natural

Selects the picture for an optimum and eye-comfortable display.

This function is not available in PC mode.

Movie

Selects the picture for viewing movies in a dark room.

Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)

Your television has several setting options that allow you to control the picture quality.

Backlight: Adjusts the brightness of LCD back light.

Contrast: Adjusts the contrast level of the picture.

Brightness: Adjusts the brightness level of the picture

Sharpness: Adjusts the edge definition of the picture.

Colour: Adjusts colour saturation of the picture.

Tint (G/R): Adjusts the colour tint of the picture.

In analogue TV, Ext., AV modes of the PAL system, you cannot use the Tint (G/R) Function.

When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R) the OSD will be adjusted

accordingly.

In PC mode, you can only make changes to Backlight, Contrast and Brightness.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

The energy consumed during use can be signicantly reduced if the brightness level of the picture is lowered, which will

reduce the overall running cost.

Advanced Settings

Samsung’s new TVs allow you to make even more precise picture settings than previous

models.

Advanced Settings is available in Standard or Movie mode.

In PC mode, you can only make changes to Dynamic Contrast, Gamma and White

Balance from among the Advanced Settings items.

BlackTone→Off/Dark/Darker/Darkest

You can select the black level on the screen to adjust the screen depth.

DynamicContrast→Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma

You can adjust the primary colour (red, green, blue) intensity.

❑

■

❑

●

❑

■

Mode :Standard ▶

Backlight :7

Contrast :95

Brightness :45

Sharpness :50

Colour :50

Tint(G/R) :G50/R50

AdvancedSettings

Picture

Move

Adjust

Enter

Return

▲

Backlight

▼

BlackTone :Off  ▶

DynamicContrast :Medium

Gamma :0

ColourSpace :Native

WhiteBalance

FleshTone :0

EdgeEnhancement :On

Move

Enter

Return

AdvancedSettings

BN68-02325A-04Eng.indb 13 2009-10-08 �� 9:53:25

English - 14

Colour Space

Colour space is a colour matrix composed of red, green and blue colours. Select your favourites colour space to experience the

most natural colour.

Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on Programme sources.

Native: Native Colour Space offers deep and rich colour tone.

Custom: Adjusts the colour range to suit your preference.

Changing the adjustment value will refresh the adjusted screen.

Settings can be adjusted and stored for each external device you have connected to an input of the TV. For example, if

you have a DVD player connected to HDMI 1 and it is currently selected, settings and adjustments will be saved for the

DVD player.

Colour: Red, Green, Blue, Yellow, Cyan or Magenta

Colour is available when Colour Space is set to Custom.

In Colour, you can adjust the RGB values for the selected colour.

To reset the adjusted RGB value, select Reset.

Red: Adjusts the red saturation level of the selected colour.

Green: Adjusts the green saturation level of the selected colour.

Blue: Adjusts the blue saturation level of the selected colour.

Reset: Resets the colour space to the default values.

White Balance

You can adjust the colour temperature for more natural picture colours.

R-Offset: Adjusts the red colour darkness.

G-Offset: Adjusts the green colour darkness.

B-Offset: Adjusts the blue colour darkness.

R-Gain: Adjusts the red colour brightness.

G-Gain: Adjusts the green colour brightness.

B-Gain: Adjusts the blue colour brightness.

Reset: The previously adjusted white balance will be reset to the factory defaults.

Flesh Tone

You can emphasize the pink ‘flesh tone’ in the picture.

Changing the adjustment value will refresh the adjusted screen.

EdgeEnhancement→Off/On

You can emphasize object boundaries in the picture.

xvYCC→Off/On

Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (ie. DVD player)

connected to the HDMI or Component IN jacks.

xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.

This function may not be supported depending on your external device.

Picture Options

In PC mode, you can only make changes to the Colour Tone and Size from among the

items in Picture Options.

ColourTone→Cool/Normal/Warm1/Warm2/Warm3

Warm1, Warm2 or Warm3 is only activated when the picture mode is Movie.

Settings can be adjusted and stored for each external device you have connected to an

input of the TV.

■

●



■

●

■

❑

■

ColourTone :Normal  ▶

Size :AutoWide

ScreenMode :16:9

DigitalNR :Auto

HDMIBlackLevel :Normal

FilmMode :Off

100HzMotionPlus :Standard

 ▼

Move

Enter

Return

PictureOptions

BN68-02325A-04Eng.indb 14 2009-10-08 �� 9:53:25

English - 15

Size

Occasionally, you may want to change the size of the image on your screen. Your TV comes with several screen size options, each

designed to work best with specific types of video input. Your cable box/satellite receiver may have its own set of screen sizes as

well. In general, though, you should view the TV in 16:9 mode as much as possible.

Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools→PictureSize.

Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.

16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

Wide Zoom: Magnify the size of the picture more than 4:3.

Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

4:3: This is the default setting for a video movie or normal broadcasting.

Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are input.

Depending on the input source, the picture size options may vary.

The items available may differ depending on the selected mode.

In PC Mode, only 16:9 and 4:3 mode can be adjusted.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Temporary image retention may occur when viewing a static image on the set for more than two hours.

Wide Zoom: Press the ► button to Select Position, then press the ENTER

button. Press the ▲ or ▼ button to move the

picture up / down. Then press the ENTER

button.

Zoom: Press the ► button to Select Position, then press the ENTER

button. Press the ▲ or ▼ button to move the picture

up and down. Then press the ENTER

button. Press the ► button to Select Size, then press the ENTER

button. Press

the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTER

button.

After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the

◄ or ► button. Use the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select Reset, then press the ENTER

button. You can initialize the setting.

If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the Overscan

function.

When Double (

) mode has been set in PIP, the Picture Size cannot be set.

ScreenMode→16:9/WideZoom/Zoom/4:3

When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS

(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is

intended for users to select it.

16:9: Sets the picture to 16:9 wide mode.

Wide Zoom: Magnify the size of the picture more than 4:3.

Zoom: Magnify the size of the picture vertically on screen.

4:3: Sets the picture to 4:3 normal mode.

This function is available in Auto Wide mode.

This function is not available in PC, Component or HDMI mode.

DigitalNR→Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static

and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

HDMIBlackLevel→Normal/Low

You can select the black level on the screen to adjust the screen depth.

This function is active only when an external device is connected to the TV via HDMI (RGB signals).

FilmMode→Off/Auto1/Auto2

The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).

Off: Turn the Film Mode function off.

Auto1: Automatically adjusts the picture for the best quality when watching a film.

Auto2: Automatically optimizes the video text on the screen (not including closed captions) when watching a film.

■

●



■

●

■

●

BN68-02325A-04Eng.indb 15 2009-10-08 �� 9:53:25

English - 16

100HzMotionPlus→Off/Clear/Standard/Smooth/Custom/Demo

Removes drag from fast scenes with a lot of movement to provide a clearer picture.

If you enable 100Hz Motion Plus, noise may appear on the screen. If this occurs, set 100Hz Motion Plus to Off.

Off: Switches 100Hz Motion Plus off.

Clear: Sets 100Hz Motion Plus to minimum.

Standard: Sets 100Hz Motion Plus to medium.

Smooth: Sets 100Hz Motion Plus to maximum.

Custom: Adjusts the blur and judder reduction level to suit your preference.

Blur Reduction: Adjusts the blur reduction level from video sources.

Judder Reduction: Adjusts the judder reduction level from video sources when playing films.

Reset: Reset the custom settings.

Demo: Displays the difference between 100Hz Motion Plus on and off modes.

BlueOnlyMode→Off/On

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green

signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such

as DVD players, Home Theatres, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to

the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar Patterns, without using an

additional Blue Filter.

Blue Only Mode is available when the picture mode is set to Movie or Standard.

PictureReset→ResetPictureMode/Cancel

Resets all picture settings to the default values.

Reset Picture Mode: Current picture values return to default settings.

Viewing Picture-in-Picture

You can use the PIP feature to simultaneously watch the TV tuner and one external video

source. This product has one built-in tuner, which does not allow PIP to function in the same

mode. Please see ‘PIP Settings’ below for details.

Press the TOOLS button to display the Tools menu. You can also configure PIP related

settings by selecting Tools→PIP.

If you select the PIP picture sound, refer to the ‘Configuring the Sound Menu’ instructions.

PIP Settings

Main picture Sub picture

Component

HDMI1, HDMI2, HDMI3/DVI, HDMI4

If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear.

You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game

or karaoke.

While Internet@TV is in operation, the PIP function cannot be used.

PIP→Off/On

You can activate or deactivate the PIP function.

Size→

You can select a size of the sub-picture.

Position→

–

—

You can select a position of the sub-picture.

In Double (

) mode, Position cannot be selected.

Channel

You can select the channel for the sub-screen.

■

●



●

■

❑

PIP :On  ▶

Size :

Position :

Channel :ATV4

Move

Enter

Return

PIP

GameMode :Off

BDWise :On

EnergySaving :Off

MenuTransparency :Bright

Melody :Medium

PIP   ▶

Move

Enter

Return

General

BN68-02325A-04Eng.indb 16 2009-10-08 �� 9:53:26

English - 17

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on

your PC will probably be different, depending upon your particular version of Windows and

your particular video card. However, even if your actual screens look different, the same basic

set-up information will apply in almost all cases. (If not, contact your computer manufacturer or

Samsung Dealer.)

First, click on ‘Control Panel’ on the Windows start menu.

When the control panel window appears, click on ‘Appearance and Themes’ and a display

dialog-box will appear.

When the control panel window appears, click on ‘Display’ and a display dialogbox will

appear.

Navigate to the ‘Settings’ tab on the display dialog-box.

The correct size setting (resolution) - Optimum: 1920 X 1080 pixels

If a vertical-frequency option exists on your display settings dialog box, the correct

value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system

doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no

video. For the display modes listed on the next page, the screen image has been optimized during manufacturing.

D-Sub and HDMI/DVI Input

Mode Resolution

Horizontal Frequency

(KHz)

Vertical Frequency

(Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H / V)

IBM

640 x 350 31.469 70.086 25.175 +/-

720 x 400 31.469 70.087 28.322 -/+

MAC

640 x 480 35.000 66.667 30.240 -/-

832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

VESA CVT

720 x 576 35.910 59.950 32.750 -/+

1152 x 864 53.783 59.959 81.750 -/+

1280 x 720 44.772 59.855 74.500 -/+

1280 x 720 56.456 74.777 95.750 -/+

1280 x 960 75.231 74.857 130.000 -/+

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1152 x 864 67.500 75.000 108.000 +/+

1280 x 1024 63.981 60.020 108.000 +/+

1280 x 1024 79.976 75.025 135.000 +/+

1280 x 800 49.702 59.810 83.500 -/+

1280 x 800 62.795 74.934 106.500 -/+

1280 x 960 60.000 60.000 108.000 +/+

1360 x 768 47.712 60.015 85.500 +/+

1440 x 900 55.935 59.887 106.500 -/+

1440 x 900 70.635 74.984 136.750 -/+

1680 x 1050 65.290 59.954 146.250 -/+

VESA GTF

1280 x 720 52.500 70.000 89.040 -/+

1280 x 1024 74.620 70.000 128.943 -/-

VESA DMT /

DTV CEA

1920 x 1080p 67.500 60.000 148.500 +/+

When using an HDMI / DVI cable connection, you must use the HDMI IN 3(DVI) jack.

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG is not supported.

Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080).

•

■

BN68-02325A-04Eng.indb 17 2009-10-08 �� 9:53:26

English - 18

Setting up the TV with your PC

Preset: Press the SOURCE button to select PC mode.

Auto Adjustment

Use the Auto Adjust function to have the TV automatically adjust the video signals it receives.

The function also automatically fine-tunes the settings and adjusts the frequency values and

positions.

Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment

by selecting Tools→AutoAdjustment.

This function does not work in DVI-HDMI mode.

Screen

Coarse / Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is

not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and

Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on

the centre of screen.

PC Position

Adjust the PC’s screen positioning if it does not fit the TV screen.

Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust

the Horizontal-Position.

Image Reset

You can replace all image settings with the factory default values.

❑

■

SOUND

Configuring the Sound Menu

Mode→Standard/Music/Movie/ClearVoice/Custom

Press the TOOLS button to display the Tools menu. You can also set the sound mode by

selecting Tools→SoundMode.

Standard: Selects the normal sound mode.

Music: Emphasizes music over voices.

Movie: Provides the best sound for movies.

Clear Voice: Emphasizes voice over other sounds.

Custom: Recalls your customized sound settings.

Equalizer

The sound settings can be adjusted to suit your personal preferences.

Mode: Selects the sound mode among the predefined settings.

Balance L/R: Adjusts the balance between the right and left speaker.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.

Reset: Resets the equalizer settings to the default values.

SRSTruSurroundHD→Off/On

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two

speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,

including internal television speakers. It is fully compatible with all multichannel formats.

Press the TOOLS button to display the Tools menu. You can also set the SRS TruSurround HD by selecting Tools→

SRS TS HD.

❑

●

❑

●

❑

Brightness :45

Sharpness :50

AutoAdjustment  ▶

Screen

AdvancedSettings

PictureOptions

PictureReset

Picture

Coarse   50

Fine   0

PCPosition

ImageReset

Move

Enter

Return

Screen

Mode :Custom ▶

Equalizer

SRSTruSurroundHD :Off

AudioLanguage :----

AudioFormat :----

AudioDescription

AutoVolume :Off

SpeakerSelect :TVSpeaker

Sound

BN68-02325A-04Eng.indb 18 2009-10-08 �� 9:53:26

English - 19

Audio Language

You can change the default value for audio languages. Displays the language information for the incoming stream.

While viewing a digital channel, this function can be selected.

You can only select the language among the actual languages being broadcast.

AudioFormat→MPEG/DolbyDigital

When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed

difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.

While viewing a digital channel, this function can be selected.

The Audio Format appears according to the broadcasting signal.

Audio Description

This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the

Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the

Audio Description On or Off and control the volume.

Press the AD button on the remote control to select Off or On.

AudioDescription→Off/On

Turn the audio description function on or off.

Volume

You can adjust the audio description volume.

Volume is active when Audio Description is set to On.

While viewing a Digital channel, this function can be selected.

AutoVolume→Off/On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is

changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the

modulation signal is high or by raising the sound output when the modulation signal is low.

Speaker Select

When you watch TV with it connecting to a Home theatre, turn the TV speakers off so you can listen to sound from the Home

theatre’s (external) speakers.

External Speaker: Used to listen to the sound of the External (Home Theatre) Speakers.

TV Speaker: Used to listen to the sound of the TV Speakers.

The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker.

If you select External Speaker in the Speaker Select menu, the sound settings will be limited

TV’s Internal Speakers Audio Out (Optical, L/R Out) to Sound System

RF / AV / Component / PC / HDMI RF / AV / Component / PC / HDMI

TV Speaker Sound Output Sound Output

External Speaker Mute Sound Output

Video No Signal Mute Mute

SoundSelect→Main/Sub

When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.

You can select this option when PIP is set to On.

Press the TOOLS button to display the Tools menu. You can also set the sound of the sub picture by selecting Tools→PIP

→SoundSelect.

SoundReset→ResetAll/ResetSoundMode/Cancel

You can restore the Sound settings to the factory defaults.

Reset Sound Mode: Current sound values return to default settings.

❑

■

❑

●

❑

SoundReset



Move

Enter

Return

Cancelsoundreset.

ResetAll ResetSoundMode Cancel

BN68-02325A-04Eng.indb 19 2009-10-08 �� 9:53:27

English - 20

Selecting the Sound Mode

You can set the sound mode in the Tools menu. When you set to Dual l ll, the current sound mode is displayed on the screen.

Audio Type Dual 1 / 2 Default

A2 Stereo

Mono MONO

Automatic change

Stereo STEREO ↔ MONO

Dual DUAL 1 ↔ DUAL 2 DUAL 1

NICAM

Stereo

Mono MONO

Automatic change

Stereo MONO ↔ STEREO

Dual

MONO ↔ DUAL 1

DUAL 2

DUAL 1

If the stereo signal is weak and an automatic switching occurs, then switch to the mono.

This function is only activated in stereo sound signal. It is deactivated in mono sound signal.

This function is only available in TV mode.

SETUP

Configuring the Setup Menu

Menu Language

You can set the menu language.

Time

For detailed procedures on setting up options, refer to the ‘Setting the Time’ instructions.

Broadcast

Subtitle

You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. Normal under the menu is the basic subtitle

and Hard of hearing is the subtitle for a hearing-impaired person.

Subtitle→Off/On

Switches subtitles on or off.

Mode→Normal/Hardofhearing

Sets the subtitle mode.

Subtitle Language

Set the subtitle language.

If the programme you are watching does not support the Hard of hearing function, Normal automatically is activated

even though Hard of hearing mode is selected.

English is the default in cases where the selected language is unavailable in the broadcast.

You can select these options simply by pressing the SUBT. button on the remote control.

DigitalText→Disable/Enable (UK only)

If the programme broadcasts with digital text, this feature is enabled.

MHEG (Multimedia and Hypermedia Information Coding Experts Group)

An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the

MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video

files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including

VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries

and network games.

❑

■

●

■

Plug&Play

MenuLanguage :English ▶

Time

Broadcast

Security

Network

General

Setup

BN68-02325A-04Eng.indb 20 2009-10-08 �� 9:53:27

English - 21

Teletext Language

You can set the Teletext language by selecting the language type.

English is the default in cases where the selected language is unavailable in the broadcast.

Preference

Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language /

Primary Teletext Language / Secondary Teletext Language

Using this feature, users can select one of the languages. The language selected here is the default when the user selects

a channel. If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the

Language menu are automatically changed to the selected language.

The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a list of languages

supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is

only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary

Audio Language, or the Primary Teletext Language of the Preference menu.

Common Interface

CI Menu

This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card.

Application Info.

This contains information on CAM inserted in the CI slot and displays it. The Application Info inserting is about the ‘CI(CI+)

CARD’. You can install the CAM anytime whether the TV is ON or OFF.

Purchase the CI CAM module by visiting your nearest dealer or by phone.

Insert the ‘CI(CI+) CARD’ into the CAM in the direction of the arrow until it fits.

Insert the CAM with the ‘CI(CI+) CARD’ installed into the common interface slot. (Insert the CAM in the direction of the

arrow, right up to the end so that it is parallel with the slot.)

Check if you can see a picture on a scrambled signal channel.

Security (depending on the model)

Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.

The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting Change PIN from the menu.

Some models require selecting the set PIN number when operating Plug & Play.

ChildLock→Off/On

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video

and audio.

You can lock some channels in Channel List.

Child Lock is available only in TV mode.

Parental Lock

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by a 4-digit PIN

(Personal Identification Number) code that is defined by the user.

The Parental Lock item differs depending on the country.

When the Parental Lock is set, the ‘\’ symbol is displayed.

Allow All: Press to unlock all TV ratings.

Block All: Press to lock all TV ratings.

Change PIN

You can change your personal ID number that is required to set up the TV.

If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0:

POWER (Off) →MUTE→8→2→4→POWER (On).

■

●

■

●

❑

■

BN68-02325A-04Eng.indb 21 2009-10-08 �� 9:53:27

English - 22

Network→NetworkType/NetworkSetup

For detailed procedures on setting up options, refer to the ‘Setting the Network’ instructions.

General

GameMode→Off/On

When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by

selecting game menu.

Restrictions on game mode (Caution)

To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.

If you display the TV menu in Game Mode, the screen shakes slightly.

Game Mode is not available in regular TV, PC and Ext mode.

While PIP is in operation, the Game Mode function cannot be used.

If the picture is poor when external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and

connect external devices.

If Game Mode is On:

Picture mode is automatically changed to Standard and cannot be changed.

Sound mode is automatically changed to Custom and cannot be changed. Adjust the sound using the equalizer.

The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer settings to

the factory defaults.

BDWise→Off/On

Provides the optimal picture quality for SAMSUNG DVD, Blu-ray and Home Theatre products which support BD Wise. You can

enjoy a richer picture when using them connected to this Samsung TV.

Connect SAMSUNG products that have BD Wise using an HDMI cable.

When the BD Wise set to On, the picture mode is automatically changed to the optimal resolution.

BD Wise is available in HDMI mode.

EnergySaving→Off/Low/Medium/High/PictureOff/Auto

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the

Energy Saving mode option to High to reduce eye fatigue as well as power consumption.

If you select Picture Off, the screen is turned off and you can only hear the sound. Press any button to get out of Picture Off.

In the Tools menu, Picture Off function is not supported.

Press the TOOLS button to display the Tools menu. You can also set the Energy Saving option by selecting Tools→

Energy Saving.

MenuTransparency→Bright/Dark

You can set the Transparency of the menu.

Melody→Off/Low/Medium/High

A melody sound can be set to come on when the TV is powered On or Off.

The Melody does not play

When no sound is output from the TV because the MUTE button has been pressed.

When no sound is output from the TV because the volume has been reduced to minimum with the volum (-) button.

When the TV is turned off by Sleep Timer function.

PIP

For detailed procedures on setting up options, refer to the ‘Viewing Picture-in- Picture’ instructions.

❑

■



■



■

BN68-02325A-04Eng.indb 22 2009-10-08 �� 9:53:27

English - 23

Setting the Time

Clock

Setting the clock is necessary in order to use the various timer features of the TV.

The current time will appear every time you press the INFO button.

If you disconnect the power cord, you have to set the clock again.

Clock Mode

You can set up the current time manually or automatically.

Auto: Set the current time automatically using the time from the digital broadcast.

Manual: Set the current time to a manually specified time.

Depending on the broadcast station and signal, the auto time may not be set correctly. If

this occurs, set the time manually.

The Antenna or cable must be connected in order to set the time automatically.

Clock Set

You can set the current time manually.

This function is only available when Clock Mode is set to Manual.

You can set the day, month, year, hour and minute directly by pressing the number buttons

on the remote control.

Sleep Timer

The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180

minutes).

Press the TOOLS button to display the Tools menu. You can also set the sleep timer by

selecting Tools→SleepTimer.

To cancel the Sleep Timer function, select Off.

Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made.

You must set the clock first.

On Time: Set the hour, minute, and activate / inactivate. (To activate timer with the setting you’ve chosen, set to Activate.)

Off Time: Set the hour, minute, and activate / inactivate. (To activate timer with the setting you’ve chosen, set to Activate.)

Volume: Set the desired volume level.

Source: You can select the TV or USB device content to be played when the TV is turned on automatically. Select TV or USB.

(Make sure that an USB device is connected to your TV.)

Antenna (when Source is set to TV): Select ATV or DTV.

Channel (when Source is set to TV): Select the desired channel.

Contents (when Source is set to USB): You can select a folder on the USB Device with music or photo files to be played

when the TV turns on automatically.

If there is no music file on the USB or the folder containing a music file is not selected, Timer function does not operate

correctly.

When there is only one photo file in the USB, the Slide Show will not play.

If the folder name is too long, the folder can not be selected.

If you are using two of the same type USB device, be sure the folder names are different so the correct USB is read.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.

When Manual is selected, press the ► button to select the desired day of the week. Press the ENTER

button over the

desired day and the

mark will appear.

You can set the hour, minute and channel by pressing the number buttons on the remote control.

Auto Power Off:

When you set the timer on, the TV will be eventually turned off, if no controls are operated for 3 hours

after the TV was turned on by the timer. This function is only available in timer on mode and prevents overheating, which

may occur if a TV is on for too long time.

❑

■

●

■

❑

●

Clock :--:--  ▶

SleepTimer :Off

Timer1 :Inactivated

Timer2 :Inactivated

Timer3 :Inactivated

 

Move

Enter

Return

Time

Plug&Play

MenuLanguage :English

Time  ▶

Broadcast

Security

Network

General

Setup

OnTime

Move

Adjust

Enter

Return

Timer1

OffTime

Volume

00 00 Inactivate

Source Antenna Channel

TV ATV 0

Repeat

Once

Sun Mon Tue Wed Thu Fri Sat

BN68-02325A-04Eng.indb 23 2009-10-08 �� 9:53:27

English - 24

Network Connection

You can set up the Internet Protocol so that you can communicate with various connected networks.

Network Connection - Cable

LAN Connection for a DHCP Environment

The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP

address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them

manually.

Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable.

Connect the Modem port on the wall and the external modem with a Modem Cable.

You can connect the LAN via a Sharer (Router).

You can connect the LAN port and the TV directly depending on your network status.

The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.

If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10

seconds and then try again.

For the connections between the external modem and the Sharer (Router), refer to the owner’s manual of the corresponding

product.

You can connect the TV to the LAN directly without connecting it through a Sharer (Router)

You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have to use an automatic-

connection-type ADSL modem.

❑

■

TV Rear Panel

The Modem Port on the Wall External Modem

(ADSL / VDSL / Cable TV)

1 LAN Cable2 Modem Cable

TV Rear Panel

The Modem Port on the Wall External Modem

(ADSL / VDSL / Cable TV)

LAN CableModem Cable LAN Cable

IP Sharer

TV Rear Panel

The LAN Port on the Wall

LAN Cable

BN68-02325A-04Eng.indb 24 2009-10-08 �� 9:53:29

English - 25

LAN Connection for Static IP Environment

The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address,

subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).

Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable.

You can connect the LAN via a Sharer (Router).

The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.

If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You must

enter these values to complete the network settings. If you do not know the values, ask your network administrator.

For the information on how to configure and connect a Sharer (Router), refer to the owner’s manual for the corresponding

product.

You can connect the TV to the LAN directly without connecting it through a Sharer (Router).

If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP.

For the procedures to use a static IP address, ask your Internet Service Provider.

Network Connection - Wireless

You can connect to the network wirelessly through a wireless IP sharer.

1. Connect the ‘Samsung Wireless LAN Adapter’ into the USB1(HDD) or USB2 terminal of the TV.

You must use the ‘Samsung Wireless LAN Adapter’(WIS09ABGN) to use a wireless network.

Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers,

Ecommerce sites and Samsungparts.com.

To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP,

your TV can use a DHCP or static IP address to connect to the wireless network.

Samsung’s Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N. When you play

DLNA video over IEEE 802.11B/G connection, the video may not be played smoothly.

If the wireless IP sharer allows you to turn the Ping connection function on/off, turn it on.

■

❑

TV Rear Panel

The LAN Port on the Wall

IP Sharer

LAN CableLAN Cable

TV Rear Panel

The LAN Port on the Wall

1 LAN Cable

TV Side Panel

The LAN Port on

the Wall

Wireless IP sharer

Samsung Wireless

LAN Adapter

LAN Cable

BN68-02325A-04Eng.indb 25 2009-10-08 �� 9:53:30

English - 26

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is

currently being used by another device nearby, this will result in interference and communications may fail.

If you apply a security system other than the systems listed blow, it will not work with the TV.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1) Authentication Mode : OPEN, SHARED, WPAPSK, WPA2PSK

2) Encryption Type : WEP, TKIP, AES

When applying the security key for the Ad-hoc mode, only the following is supported.

1) Authentication Mode : SHARED, WPANONE

2) Encryption Type : WEP, TKIP, AES

If your AP supports WPS(Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or

PIN (Personal Indentification Number). WPS will automatically configure the SSID and WPA key in either mode.

If the device isn’t certified, it may not connect to the TV via the ‘Samsung Wireless LAN Adapter’.

Setting the Network

Network Type

Select Cable or Wireless as the method to connect to the network.

The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.

Cable

Connect to the network using a cable.

Wireless

Connect to the network wirelessly.

Network Setup

Cable Network Setup

(when Network Type is set to Cable)

Please check if the LAN cable is connected.

InternetProtocolSetup→Auto/Manual

Network Test: You can test or confirm the network connection status after setting up the network.

When unable to connect to a wired network

If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time

and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet

as the MAC address differs from that of the device (PC).

In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)

to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may

not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet

using an Internet Sharer (Router).

The internet connection may fail due to a firewall problem. In this case, contact your Internet service provider. If you cannot

connect to the Internet even if you have followed the procedures of your Internet service provider, please contact Samsung

Electronics.

Cable Network Setup-Auto

If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are

automatically configured.

Set Network Type to Cable.

Select Cable Network Setup.

Set Internet Protocol Setup to Auto.

The Internet Protocol is set automatically.

Select Network Test to check the network connectivity.



❑

■

❑

■

●

InternetProtocolSetup :Auto  ▶

NetworkTest

Move

Enter

Return

CableNetworkSetup

IPAddress :   

SubnetMask :   

Gateway :    

DNSServer :   

Broadcast

Security

Network  ▶

General

Setup

BN68-02325A-04Eng.indb 26 2009-10-08 �� 9:53:31

English - 27

Cable Network Setup-Manual

To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol

(IP).

Set Network Type to Cable.

Select Cable Network Setup.

Set Internet Protocol Setup to Manual.

Set up IP Address, Subnet Mask, Gateway and DNS Server.

Press the number buttons on the remote control when you set the Network manually.

Select Network Test to check the network connectivity.

Wireless Network Setup

The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected.

InternetProtocolSetup→Auto/Manual

Network Test: You can test or confirm the network connection status after setting up the network.

When unable to connect to an AP(Access Point)

Your TV may fail to locate an AP(Access Point) that is configured as a private SSID type. In this case, please change the AP

settings and try again. If your Internet service provider has registered the MAC address of the device used to connect to the

Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able

to connect to the Internet as the MAC address differs from that of the device (PC).

In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)

to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider,

please contact a Samsung Electronics.

Select a network

Access Point: You can select the IP sharer to use when using a wireless network.

If a wireless Access Point is not in the Access Point list, press the Red button.

When the connection is made, you will be returned to the screen automatically.

If you have selected an Access Point with a security authentication:

The Security Key input screen appears. Enter the security key and press the Blue

button on the remote control.

If security encryption type is WEP, 0~9, A~F will be available when you input

security key.

Connecting WPS (Wi-Fi Protected Setup)

If Security Key is already set: In access point list, select WPS.

You can select PBC, PIN, Security Key.

Connecting by using PBC: Select a PBC (Push Button Configuration). Press the PBC

button on the AP (access point) within 2minutes, and wait for connection.

Connecting by using PIN: Select a PIN (Personal Identification Number).

The message showing the PIN Code is displayed. Input the PIN Code at AP

device within 2minutes. Select OK and wait for connection.

Try again if connecting operation doesn’t work

When the connection is not established although tried again, reset the access

point. Please refer to a manual of each access point.

Connecting by using Security Key: When selecting Security Key, the input window is

displayed. Input the security key and press Blue button.

Try again if connecting operation doesn’t work.

■

●



●



InternetProtocolSetup :Manual  ▶

NetworkTest

Move

Enter

Return

CableNetworkSetup

IPAddress :



SubnetMask :



Gateway :





DNSServer :



WirelessNetworkSetup



Move

`~9

Number

Enter

Return

SecurityKey



Number

 

Delete

 

Done

A B C D E F

WirelessNetworkSetup



Move

Enter

Return

Selectanetwork 3/9



Ad-hoc

sson

jee

AP_1

Ap_2

PBC

SecurityKey

Cancel

PressthePBCbuttonontheaccesspoint.

AccessPointName:AP_1

PressOKAfterinputTV’sPincodeintheaccess

point’ssetup.

AccessPointName:AP_1

PINCode:12345678

CancelOK

WirelessNetworkSetup



Move

`~9

Number

Enter

Return

SecurityKey



Number



Lowercase

 

Delete

 

Done

BN68-02325A-04Eng.indb 27 2009-10-08 �� 9:53:32

English - 28

If Security Key is not set: When the security setting of AP that supports WPS is NONE,

you can select PBC, PIN, None Security. None Security is capable of connecting to AP

directly without using WPS function.

Process of PBC, PIN is same as above. Refer to if Security Key is already set.

Try again if connecting operation doesn’t work.

Ad-hoc: You can connect to a mobile device without an access point through the

‘Samsung Wireless LAN Adapter’ by using a peer to peer network.

How to connect to new Ad-hoc

1. Choose Select a network, then a device list is displayed.

While in the device list, press the Blue button on the remote or select Ad-

hoc.

The message The existing network system may have limited

functionality. Do you want to change the network connection? is

displayed.

Input the generated Network Name(SSID) and Security Key into the

device you want to connect.

How to connect an existing Ad-hoc device

1. Choose Select a network, the device list is displayed.

Select the device you want in the Device list.

If security key was applied, input the security key again.

If network doesn’t operate normally, please check the Network

Name(SSID) and Security Key again. If the Security Key is incorrect,

it may be the reason for the malfunction.

Wireless Network Setup-Auto

If you want to connect AP, AP should support DHCP. Only devices which support Ad-hoc mode

can be connected without DHCP.

Set Network Type to Wireless.

Select Wireless Network Setup.

Set Internet Protocol Setup to Auto.

The Internet Protocol is set automatically.

Select a network through Select a network.

Select Network Test to check the network connectivity.

Wireless Network Setup-Manual

1. Set Network Type to Wireless.

Select Wireless Network Setup.

Set Internet Protocol Setup to Manual.

Set up IP Address, Subnet Mask, Gateway and DNS Server.

Press the number buttons on the remote control when you set the Network manually.

Select a network through Select a network.

Select Network Test to check the network connectivity.

●



WirelessNetworkSetup



Move

Enter

Return

Selectanetwork 3/9



Ad-hoc

sson

jee

AP_1

Ap_2

PBC

NoneSecurity

InternetProtocolSetup :Auto  ▶

NetworkTest

Selectanetwork :AP1

Move

Enter

Return

WirelessNetworkSetup

IPAddress :   

SubnetMask :   

Gateway :    

DNSServer :

  

InternetProtocolSetup :Manual  ▶

NetworkTest

Selectanetwork :AP1

Move

Enter

Return

WirelessNetworkSetup

IPAddress :



SubnetMask :



Gateway :





DNSServer :



Theexistingnetworksystemmayhavelimited

functionality.Doyouwanttochangethenetwork

connection?

Yes No

BN68-02325A-04Eng.indb 28 2009-10-08 �� 9:53:33

English - 29

INPUT / SUPPORT

Input Menu

Source List

Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box /

Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your

choice.

Press the SOURCE button on the remote control to view an external signal source. TV

mode can be selected by pressing the TV button.

TV / Ext.1 / Ext.2 / AV / Component / PC / HDMI1 / HDMI2 / HDMI3/DVI / HDMI4 / USB1 /

USB2

You can choose only those external devices that are connected to the TV. In the Source

List, connected inputs will be highlighted and sorted to the top. Inputs that are not connected

will be sorted to the bottom.

If USB devices are connected to the USB1(HDD) and USB2 jacks, they are displayed as

USB1 and USB2 in order.

Ext. and PC Always stays activated.

Using the Colour buttons on the remote with the Source list

Red (Refresh): Refreshes the connected external devices. Press this if your Source is

on and connected, but does not appear in the list.

TOOLS (Tools): Displays the Edit Name and Information menus.

Edit Name

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI Devices / TV / IPTV / Blu-ray

/ HD DVD / DMA

Name the device connected to the input jacks to make your input source selection easier.

When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 3(DVI) port, you should set the HDMI3/DVI

mode to DVI Devices in the Edit Name of the Input mode.

When connecting an HDMI/DVI cable to the HDMI IN 3(DVI) port, you should set the HDMI3/DVI mode to DVI Devices in the

Edit Name of the Input mode. In this case, a separate sound connection is required.

Support Menu

Legal Notice

View the Legal Notice and General Disclaimer regarding Third Party Contents and Service.

The General Disclaimer may differ depending on the country.

Product Guide

The Product Guide gives you information on the most important features of this TV.

The descriptions provided by this function are in English only.

❑

■



❑

■

❑

LegalNotice  ▶

ProductGuide

SelfDiagnosis

SoftwareUpgrade

HDConnectionGuide

ContactSamsung

Support

SourceList 

EditName

Input

Refresh

Tools

SourceList

Ext.1 :----

Ext.2 :----

PC :----

AV :----

Component :----

BN68-02325A-04Eng.indb 29 2009-10-08 �� 9:53:33

English - 30

Using the Remote Control Buttons in the Product Guide Menu

Button Operations

Yellow Button Shows the contents of the Product Guide sequentially. (Auto Play)

◄/► Move the cursor and select an item.

ENTER

Select the currently selected item.

RETURN Return to the previous menu.

EXIT Stop the current function and return to the Product Guide main menu.

Self Diagnosis

Picture Test

If you think you have a picture problem, perform the picture test. Check the colour pattern on

the screen to see if the problem still exists.

Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes.

There may be a problem with the TV. Therefore, contact Samsung’s call centre for

assistance.

No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check

your connections. If the problem still persists, refer to the external device’s user manual.

Sound Test

If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound

through the TV.

If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV

speaker in the Sound menu.

The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing

the MUTE button.

Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with

the TV. Therefore, contact Samsung’s call centre for assistance.

No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check

your connections. If the problem still persists, refer to the external device’s user manual.

Signal Information (digital channels only)

Unlike analogue channels, which can vary in reception quality from ‘snowy’ to clear, digital (HDTV) channels have either perfect

reception quality or you will not receive them at all. So, unlike analogue channels, you cannot fine tune a digital channel. You can,

however, adjust your antenna to improve the reception of available digital channels.

If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.

Continue to adjust the antenna until you find the best position with the strongest signal.

❑

■

●

■

●

■

SelfDiagnosis

Move

Enter

Return

PictureTest   ▶

SoundTest

SignalInformation

BN68-02325A-04Eng.indb 30 2009-10-08 �� 9:53:34

English - 31

Software Upgrade

Samsung may offer upgrades for the TV’s firmware in the future. These upgrades can be

performed via the TV when it is connected to the Internet, or by downloading the new firmware

from samsung.com to a USB memory device.

Current Version is the software already installed in the TV.

Alternative Software (Backup) shows the previous version that will be replaced.

Software is represented as ‘Year/Month/Day_Version’. The more recent the date, the newer

the software version. Installing the latest version is recommended.

By USB

Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the

TV. Please be careful to not disconnect the power or remove the USB drive while upgrades

are being applied. The TV will turn off and turn on automatically after completing the firmware

upgrade. Please check the firmware version after the upgrades are complete (the new version

will have a higher number than the older version).

When software is upgraded, video and audio settings you have made will return to their default

(factory) settings. We recommend you write down your settings so that you can easily reset

them after the upgrade.

By Channel

Upgrades the software using the broadcasting signal.

If the function is selected during the software transmission period, this function searches for available software and downloads

the software.

The time required to download the software is determined by the signal status.

Standby Mode Upgrade

To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby

mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on

slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.

Alternative Software (Backup)

If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version.

If software was changed, existing software is displayed.

You can change current software to alternative software by ‘Alternative Software’.

HD Connection Guide

This menu presents the connection method that provides the optimal quality for the HDTV. Refer to this information when

connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can view the

information regarding the call centre, product and software file download method.

❑

■

❑

TV Side Panel

USB Drive

CurrentVersion 2009/01/18_000001

ByUSB   ▶

ByChannel

StandbyModeUpgrade :45Min

AlternativeSoftware 2009/01/15_00000

Move

Enter

Return

SoftwareUpgrade

BN68-02325A-04Eng.indb 31 2009-10-08 �� 9:53:34

English - 32

MEDIA PLAY (USB & DLNA)

Connecting a USB Device

1. Press the POWER button to turn the TV on.

Connect a USB device containing photo, music and/or movie files to the USB1(HDD) or USB2

jack on the side of the TV.

When the Application selection screen is displayed, press the ENTER

button to select

Media Play (USB & DLNA).

MTP (Media Transfer Protocol) is not supported.

The file system supports FAT16, FAT32 and NTFS.

Certain types of USB Digital camera and audio devices may not be compatible with this

TV.

Media Play only supports USB Mass Storage Class devices (MSC). MSC

is a Mass Storage Class Bulk-Only Transport device. Examples of MSC

are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not

supported.).

Please connect directly to the USB port of your TV. If you are using a separate

cable connection, there may be a USB compatibility problem.

Before connecting your device to the TV, please back up your files to prevent

them from damage or loss of data. SAMSUNG is not responsible for any data

file damage or data loss.

Connect a USB HDD to the dedicated port, USB1 (HDD) port. However, if the connected device requires high power, the

USB1 (HDD) may fail to support the device.

Do not disconnect the USB device while it is loading.

MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.

The higher the resolution of the image, the longer it takes to display on the screen.

The maximum supported JPEG resolution is 15360X8640 pixels.

For unsupported or corrupted files, the ‘Not Supported File Format’ message is displayed.

If sort key is set to Basic View, up to 1000 files can be displayed in each folder. The other sort key can display up to 10000

files.

MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM)

is a technology that supports the creation of content, the distribution and management of the content in an integrated

and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the

illegal copying of contents, as well as managing billings and settlements.

When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen.

If more than 2 PTP devices are connected, you can only use one at a time.

If more than one MSC device is connected, some of them may not be recognized. If a device requires high power (more

than 500mA or 5V), the USB device may not be supported.

If an over-power (Fail add new device USB1/USB2 Power Overload) warning message is displayed while you are

connecting or using a USB device, the device may not be recognized or may malfunction.

Using the Remote Control Button in Media Play Menu

Button Operations

▲/▼/◄/► Move the cursor and select an item.

ENTER

Select the currently selected item. While playing a slide show, movie, or music file:

- Pressing the ENTER

button during play pauses the play.

- Pressing the ENTER

button during pause resumes the play.

∂

∑

Play or pause the Slide Show, music or movie.

RETURN Return to the previous menu.

TOOLS Run various functions from the Photo, Music and Movie menus.

∫

Stop the current slide show, Music or Movie file.

Jump to previous group/Jump to next group.

INFO Show file information.

MEDIA.P Exit Media Play mode.

EXIT, TV

Stop Media Play mode and Returns to TV mode.

TV Side Panel

USB Drive

851.86MB/993.02MBFree

Photo

SUM

Device

PHOTO

Return

Music Movie Setup

BN68-02325A-04Eng.indb 32 2009-10-08 �� 9:53:34

English - 33

Media Play Function

This function enables you to view and listen to photo, music and/or movie files saved on a USB Mass Storage Class (MSC) device.

It might not work properly with unlicensed multimedia files.

Entering the Media Play (USB & DLNA) Menu

1. Press the MENU button. Press the ▲ or ▼ button to select Application, then

press the ENTER

button.

Press the ▲ or ▼ button to select Media Play (USB & DLNA), then press the

ENTER

button.

The Media Play (USB & DLNA) menu is displayed.

Press the MEDIA.P button on the remote control to display the Media Play

menu.

Press the SOURCE button on the remote control to view the source list. Then

Press the ▲ or ▼ button to select USB.

Press the Red button, then press the ▲ or ▼ button to select the USB Memory.

Press the ENTER

button.

This function differs depending on the USB Memory Device / DLNA device.

The selected USB device name appears at the bottom left of the screen.

Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then

press the ENTER

button.

To exit Media Play mode, press the MEDIA.P button on the remote control.

Removing a USB Memory Device Safely

You can remove the device safely from the TV.

Press the TOOLS button in the Media Play file list screen, or while a Slide Show,

music or movie is being played.

Press the ▲ or ▼ button to select Remove Safely, then press the ENTER

button.

Remove the USB device from the TV.

Screen Display

Move to either ‘Sort key List Section’, ‘Group List Section’ or ‘File List Section’ using the Up and Down buttons. After selecting a

section, press the ◄ or ► buttons to select an item.

1 Current Sort key: This field shows the current standard for sorting files. Press the ◄ or ► button to change the standard for

sorting files.

2 View Groups: Shows the detailed groups of the files sorted according the selected Sort key. The sort group where the

currently selected file is contained is highlighted.

3 Currently selected file: The selected file is the file you can now control. Photo and movie files are displayed as thumbnail

images.

4 Current Device: Shows the currently selected device name. Press the Red button to select a device.

Red (Device) button: Selects a connected device.

•

851.86MB/993.02MBFree

Photo

SUM

Device

PHOTO

Return

Music Movie Setup

SUM Device

FavouritesSettings Select

Tools

Return

Preference

BasicView

Timeline

Folder

Colour

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

SlideShow

PlayCurrentGroup

Information

RemoveSafely

5/15

SUM Device

FavouritesSettings Select

Tools

Return

Preference

BasicView

Timeline

Folder

Colour

5/15

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

1File(s)Selected

4 5

Sort key List Section

Group List Section

File List Section

BN68-02325A-04Eng.indb 33 2009-10-08 �� 9:53:40

English - 34

5 Help Items

Green (Favourites Settings) button: Changes the Favourites Settings for the selected file. Press this button repeatedly

until the desired value appears.

Yellow (Select) button: Selects file from the file list. Selected files are marked with a symbol

. Press the Yellow button

again to cancel a file selection.

TOOLS (Tools) button: Displays the option menus. (The option menu changes according to the current status.)

6 Item Selection Information: Shows the number of files that are selected by pressing the Yellow button.

Sorting the Photo / Music / Movie List

Basic View

Shows the folders on the USB memory device. If you select a folder and press the

ENTER

button, corresponding files (Photo / Music / Movie) contained in the selected

folder are displayed.

When sorted according to the Basic View, you cannot set Favourites files.

Folder

Sorts the files by folder. If there are many folders in USB, the photos files are shown in

order in each folder. The file in the Root folder is shown first and the others are shown

in alphabetical order by name.

Preference→

FFF

Sorts the files by preference (Favourites).

Changing the Favourites Settings

Select the desired photo in the file list, then press the Green button repeatedly until

the desired setting appears.

The stars are for grouping purposes only. For example, the 3 star setting does not

have any priority over the one star setting.

Timeline (Photo / Movie)

Sorts and displays the music or movie titles in symbol/number/alphabet/special order.

Title (Music / Movie)

Sorts the music titles in symbol/number/alphabet/special order, and shows the music

file.

Photo

Colour→Red/Yellow/Green/Blue/Magenta/Black/Gray/Unclassified

Sorts photos by colour. You can change the photo colour information.

You should set the Use Colour View to on in the Setup menu before sorting photos by colour.

Music

Artist

Sorts the music file by artist in symbol/number/alphabet/special order.

Mood→Energetic/Rhythmical/Sad/Exciting/Calm/Unclassified

Sorts music files by the mood. You can change the music mood information.

Genre

Sorts music files by the genre.

•

❑

SUM Device

FavouritesSettings Select

Tools

Return

Preference

BasicView

Timeline

Folder

Colour

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

5/15

SUM Device

FavouritesSettings Select

Tools

Return

Preference

BasicView

Title

Folder

Genre

ILoveYou

HaHaHa

Gold

Shine

Way

WantMe

Lies

GlenHans

OnceOst

2007

Soundtrack

3/37Energetic

SUM Device

FavouritesSettings Select

Tools

Return

Preference

BasicView

Timeline

Folder

Title

ABCD.avi

1235.avi

1236.avi

1237.avi

1233.avi

1232.avi

1231.avi

5/15

BN68-02325A-04Eng.indb 34 2009-10-08 �� 9:53:46

English - 35

Photo / Music / Movie List Option Menu

1. Press the MEDIA.P button.

Press the ◄ or ► button to select Photo, Music or Movie then press the

ENTER

button.

Press the ◄ or ► button to select the desired file.

Selecting Multiple Files

Press the ◄ or ► button to select the desired file. Then press the Yellow

button.

Repeat the above operation to select multiple files.

The mark

appears to the selected file.

Press the TOOLS button.

The option menu changes according to the current status.

Play Current Group

Using this menu, you can play a SlideShow using only the photo files in the currently

selected sorting group.

Deselect All (When at least one file is selected)

You can deselect all files.

The

mark indicating the corresponding file is selected is hidden.

Information

The photo/ music/ movie file information is displayed. You can view the information of

files during a SlideShow using the same procedures.

Press the INFO button to viewing the information.

Remove Safely

You can remove the device safely from the TV.

Photo

Slide Show

Using this menu, you can play a SlideShow using the photo files on the USB memory device.

Change Group (When the Sort key is the Colour)

You can change a selected photo file’s (or group of files) colour information in order to move it from one colour group to another.

This does not change the actual colour of the photo.

The group information of the current file is updated and the photos are moved to the new colour group.

To change the information of multiple files, select the files you want by pressing the Yellow button.

Music

Change Group (When the Sort key is Mood)

You can change the mood information of music files. The group information of the current file is updated and the file is moved to

the new group. To change the information of multiple files, select files by pressing the Yellow button.



❑

SUM Device

FavouritesSettings Select

Tools

Return

Colour

Folder

Preference

Timeline

BasicView

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

SlideShow

PlayCurrentGroup

ChangeGroup

Information

RemoveSafely

5/15

SUM Device

FavouritesSettings Select

Tools

Return

Preference

BasicView

Title

Folder

Genre

HaHaHa

Gold

Shine

Way

WantMe

Lies

ILoveYou

GlenHans

OnceOst

2007

Soundtrack

3/37Energetic

PlayCurrentGroup

Information

RemoveSafely

SUM Device

FavouritesSettings Select

Tools

Return

Preference

BasicView

Timeline

Folder

Title

ABCD.avi

1235.avi

1236.avi

1237.avi

1233.avi

1232.avi

1231.avi

5/15

PlayCurrentGroup

Information

RemoveSafely

BN68-02325A-04Eng.indb 35 2009-10-08 �� 9:53:50

English - 36

Slide Show / Music Play / Movie Play Option Menu

1. During a slide show (or when viewing a photo) or playing a music or movie, press the TOOLS button to set the option.

Press the ▲ or ▼ button to select the desired option, then press the ENTER

button.

Picture Setting / Sound Setting

You can select the picture and sound settings.

Information

The file information is displayed.

Remove Safely

You can remove the device safely from the TV.

Slide Show Option Menu

Stop Slide Show / Start Slide Show

You can start or stop a SlideShow.

SlideShowSpeed→Slow/Normal/Fast

You can select the slide show speed.

This function is available only during a slide show.

You can also change the speed of the Slide Show by pressing the

(REW) or

(FF) button during the Slide Show.

Slide Show Effect

You can select the screen transition effect used in the slideshow.

None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random

This function is available only during a slide show.

Rotate

You can rotate photos saved on a USB memory device.

Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚.

Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚.

The rotated file is not saved.

Zoom

You can magnify photos saved on a USB memory device. (x1 → x2 → x4)

To move the enlarged photo image, press the ENTER

button, then press the ▲/▼/◄/► buttons. Note that when the

enlarged picture is smaller than the original screen size, the location change function doesn’t work.

The enlarged file is not saved.

Background Music

You can select background music when watching a Slide Show.

To use this feature, there must be music and photo files stored on the USB device.

Loading music files is needed to change BGM mode. Play music files in music category to load.

Music Play Option Menu

RepeatMode→On/Off

You can play music files repeatedly.

Movie Play Option Menu

PictureSize→Fit/Original

Play video at the screen size or original size.

Caption Setting

You can set the captions for the movie.

❑

■

❑

StopSlideShow

SlideShowSpeed : Normal

SlideShowEffect : Fade1

Rotate

Zoom

BackgroundMusic

PictureSetting

SoundSetting

Information

 ▼

Move

Enter

Exit

Tools

RepeatMode ◀On▶

PictureSetting

SoundSetting

Information

RemoveSafely

Move

Adjust

Exit

Tools

PictureSetting

SoundSetting

PictureSize : Fit

CaptionSetting

Information

RemoveSafely

Move

Enter

Exit

Tools

BN68-02325A-04Eng.indb 36 2009-10-08 �� 9:53:51

English - 37

Viewing a Photo or Slide Show

Viewing a Slide Show

All files in the File List Section will be used for the Slide Show.

During the slide show, files are displayed in order from the currently shown file.

The Slide Show progresses in the order sorted in the File List Section.

Music files can be automatically played during the Slide Show if the

Background Music is set to On.

While a photo list is displayed, press the

∂

(Play)/ENTER

button on the

remote control to start slide show.

SlideShow Control Buttons

Button Operations

ENTER

Play/Pause the Slide Show.

∂

Play the Slide Show.

∑

Pause the Slide Show.

∫

Exit Slide Show and return to the photo list.

Change the SlideShow playing speed.

TOOLS Run various functions from the Photo menus.

Playing current group

1. Press the ▲ button to move to the Sort key Section.

Press the ◄ or ► button to select a sorting standard.

Press the ▼ button to move to the Group List Section.

Select a group using the ◄ and ► buttons.

Press the

∂

(Play) button. A slideshow begins with the files of the selected

group.

Alternatively

Select a Sort key and then in the File List Section, select the photos contained in

the desired group.

To move to the previous/next group, press the

(REW) or

(FF) button.

Press the TOOLS button.

Press the ▲ or ▼ button to select Play Current Group, then press the ENTER

button.

Only the photos in the sorting group including the selected files will be used for the Slide Show.

ToperformaSlideShowwithonlytheselectedles

1. Press the ▼ button to select the File List Section.

Press the ◄ or ► button to select the desired photo in the File List Section.

Press the Yellow button.

Repeat the above operation to select multiple photos.

The

mark appears to the left of the selected photo.

If you select one file, the Slide Show will not be performed.

To deselect all selected files, press the TOOLS button and select Deselect All.

Press the

∂

(Play)/ENTER

button.

The selected files will be used for the Slide Show.

Alternatively

1. In the File List Section, press the Yellow buttons to select the desired photos.

Press the TOOLS button.

Press the ▲ or ▼ button to select Slide Show, then press the ENTER

button.

The selected files will be used for the Slide Show.

●

SUM Device

FavouritesSettings Select

Tools

Return

BasicView

Timeline

Folder

Colour

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

SlideShow

PlayCurrentGroup

Information

RemoveSafely

5/15

Preference

Pause◀▶Previous/Next

Tools

Return

SUM

1234.jpg

580x7652009/01/025/15

▶Normal

SUM Device

FavouritesSettings Select

Tools

Return

BasicView

Timeline

Folder

Colour

1234.jpg

1235.jpg

1236.jpg

1237.jpg

1233.jpg

1232.jpg

1231.jpg

5/15

Preference

BN68-02325A-04Eng.indb 37 2009-10-08 �� 9:53:58

English - 38

Playing Music

Playingamusicle

1. Press the ▼ button to select the File List Section.

Press the ◄ or ► button to select a music file to be played.

Press the

∂

(Play)/ENTER

button.

This menu only shows files with the MP3 file extension. Files with other

file extensions are not displayed, even if they are saved on the same USB

device.

The selected file is displayed at the top with its playing time.

To adjust the music volume, press the volume button on the remote control.

To mute the sound, press the MUTE button on the remote control.

If the sound is odd when playing MP3 files, adjust the Equalizer and SRS TruSurround HD in the Sound menu. (An

over-modulated MP3 file may cause a sound problem.)

The playing duration of a music file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of

the file.

(REW) or

(FF) buttons do not function during play.

Music Play Control Buttons

Button Operations

ENTER

Play/Pause the music file.

∂

Play the music file

∑

Pause the music file

∫

Exit play mode and return to the music list.

TOOLS Run various functions from the Music menus.

Music function information icon

When all music files in the folder (or the selected file) are repeated. Repeat Mode is On.

When all music files in the folder (or the selected file) are played once. Repeat Mode is Off.

Playing the music group

1. Press the ▲ button to move to the Sort key Section.

Press the ◄ or ► button to select a sorting standard.

Press the ▼ or ENTER

button to move to the Group List Section.

Press the

∂

(Play) button. The files of the selected group will start playing.

Alternatively

Select a sort key and then in the File List Section, select the files contained in the desired group.

To move to the previous/next group, press the

(REW) or

(FF) button.

Press the TOOLS button.

Press the ▲ or ▼ button to select Play Current Group, then press the ENTER

button.

The music files in the sorting group including the selected file are played.

Playingtheselectedmusicles

1. Press the ▼ button to select the File List Section.

Press the ◄ or ► button to select the desired music file.

Press the Yellow button.

Repeat the above operation to select multiple music files.

The

appears to the left of the selected music file.

To deselect all selected files, press the TOOLS button and select Deselect All.

Press the

∂

(Play)/ENTER

button.

The selected files will be played.

●

Pause◀▶Previous/Next

Tools

Return

SUM

ILoveYou

HaHaHaWay

▶00:00:04/00:04:043/37

BN68-02325A-04Eng.indb 38 2009-10-08 �� 9:53:58

English - 39

Playing a Movie File

Playingamoviele

1. Press the ▼ button to select the File List Section.

Pressing the ◄ or ► button to select a movie file to be played.

Press the

∂

(Play)/ENTER

button.

The selected file is played.

The selected file is displayed at the top with its playing time.

The playing duration of a movie file may be displayed as ‘00:00:00’ if its

playing time information is not found at the start of the file.

You can watch exciting gaming multimedia files, but the gaming function is not

supported.

Supported Subtitle Formats

Name File extension Format

MPEG-4 time-based text .ttxt XML

SAMI .smi HTML

SubRip .srt string-based

SubViewer .sub string-based

Micro DVD .sub or .txt string-based

Supported Video Formats

File extension Container Video Decoder Audio codec

File extension Container Video Decoder Audio codec Resolution

*.avi AVI

Divx 3.11 / 4.x / 5.1 / 6.0

MP3

AC3

LPCM

ADPCM

720x576

XviD 1920x1080

H.264 BP / MP / HP 1920x1080

MPEG4 SP / ASP 1920x1080

Motion JPEG 800x600

*.mkv MKV

Divx 3.11 / 4.x / 5.1 / 6.0

MP3

AC3

LPCM

ADPCM

720x576

XviD 1920x1080

H.264 BP / MP / HP 1920x1080

MPEG4 SP / ASP 1920x1080

Motion JPEG 800x600

*.asf ASF

Divx 3.11 / 4.x / 5.1 / 6.0

MP3

AC3

LPCM

ADPCM

WMA

720x576

XviD 1920x1080

H.264 BP / MP / HP 1920x1080

MPEG4 SP / ASP 1920x1080

Motion JPEG 800x600

*.wmv ASF VC1 WMA 1920x1080

*.mp4

MP4

(SMP4)

H.264 BP / MP / HP

MP3

ADPCM

AAC

1920x1080

MPEG4 SP / ASP 1920x1080

XVID 1920x1080

*.3gp 3GPP

H.264 BP / MP / HP

ADPCM

AAC

1920x1080

MPEG4 SP / ASP 1920x1080

*.vro

VRO

VOB

MPEG2

AC3

MPEG

LPCM

1920x1080

MPEG2 1920x1080

*.mpg

*.mpeg

MPEG1

AC3

MPEG

LPCM

1920x1080

MPEG2 1920x1080

*.ts

*.tp

*.trp

MPEG2

AAC

MP3

1920x1080

H.264 1920x1080

VC1 1920x1080

Pause◀▶Jump

Tools

Return

SUM

ABC.avi

▶00:00:01/00:05:303/37

BN68-02325A-04Eng.indb 39 2009-10-08 �� 9:53:58

English - 40

Video Play Control Buttons

Button Operations

ENTER

Play/Pause the movie file

∂

Play the movie file

∑

Pause the movie file

TOOLS Run various functions from the Movie menus.

∫

Exit play mode and return to the movie list.

◄ / ► Skip forwards or backwards through the movie file.

▲ / ▼ Move to the first/last of the file.

Play the file at double speed. This function may not be supported depending on the codec.

Playing the movie group

1. Press the ▲ button to move to the Sort key Section.

Press the ◄ or ► button to select a sorting standard.

Press the ▼ or ENTER

button to move to the Group List Section.

Press the

∂

(Play) button. Only the files of the selected group will start playing.

Alternatively

Select a Sort key and then in the File List Section, select the files contained in the desired group.

To move to the previous/next group, press the

(REW) or

(FF) button.

Press the TOOLS button.

Press the ▲ or ▼ button to select Play Current Group, then press the ENTER

button.

The movie files in the sorting group including the selected file are played.

Playingtheselectedmovieles

1. Press the ▼ button to select the File List Section.

Press the ◄ or ► button to select the desired music file.

Press the Yellow button.

The

mark appears to the left of the selected movie file.

To deselect all selected files, press the TOOLS button and select Deselect All.

Repeat the above operation to select multiple movie files.

Press the

∂

(Play)/ENTER

button.

Only the selected file is played.

Playing movie continuously (Resume Play)

If you exit the playing movie function, the movie can be played later from the point where it was stopped.

Select the movie file you want to play continuously by pressing the ◄ or ► button to select it from the File List Section.

Press the

∂

(Play)/ENTER

button.

Select Play Continuously (Resume Play) by pressing the Blue button.

The Movie will begin to play from where it was stopped.

If Cont. Movie Play Help function is set On in the Setup menu, a pop-up message will appear when you resume play a

movie file.

●

BN68-02325A-04Eng.indb 40 2009-10-08 �� 9:53:58

English - 41

Using the Setup Menu

Setup displays the user settings of the Media Play menu.

Press the MEDIA.P button.

Press the ◄ or ► button to select Setup, then press the ENTER

button.

Press the ▲ or ▼ button to select the desired option.

Press the ◄ or ► button to select the option.

To exit Media Play mode, press the MEDIA.P button on the remote control.

UseColourView→On/Off

You can select sorting photos by colour. If this option is set to On, the loading time may

be increased to collect colour information from the photos.

MusicRepeatMode→On/Off

Select to repeatedly play music files.

Cont.movieplayhelp→On/Off

Select to display the help pop-up message for continuous movie playback.

Get the DivX® VOD registration code

Shows the registration code authorized for the TV. If you connect to the DivX web site

and register the registration code with a personal account, you can download VOD

registration file.

If you play the VOD registration using Media Play, the registration is completed.

For more information on DivX® VOD, visit www.DivX.com.

Get the DivX® VOD deactivation code

When DivX® VOD is not registered, the registration deactivation code is displayed.

If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.

ScreenSaverRunTime→2hours/4hours/8hours

Select to set the waiting time before the screen saver appears.

Information

Select to viewing the information of the connected device.

Remove Safely

You can remove the device safely from the TV.

■

851.86MB/993.02MBFree

Photo

SUM

SUM Device

SETUP

Exit

Music Movie Setup

UseColourView ◀Off ▶

MusicRepeatMode On

Cont.movieplayhelp On

GettheDivX®VODregistrationcode

GettheDivX®VODdeactivationcode

ScreenSaverRunTime 2hours

Information

RemoveSafely

Move

Adjust

Return

IfthisissettoON,theloadingtimeincreasesforcollectingthecolour

information.

SUM Device

BN68-02325A-04Eng.indb 41 2009-10-08 �� 9:53:59

English - 42

MEDIA PLAY-DLNA

Setting the DLNA Network

DLNA allows you to watch pictures, musics and videos saved on your PC or on your TV through a network connection in Media

Play mode. This removes the need to copy them to a USB storage device and then connect the device to your TV. To use DLNA,

the TV must be connected to the network and the DLNA application must be installed on your PC.

Network Connection Diagram-Cable

Network Connection Diagram-Wireless

1. For more information on how to configure your network, refer to ‘Setting the Network’.

You are recommended to locate both TV and PC in same subnet. The first 3 parts of the subnet address of the TV and

the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:

123.456.789.**)

Connect the PC to which the Samsung PC Share Manager programme will be installed and the external modem using a LAN

cable.

You can connect the TV to the PC directly without connecting it through a Sharer (Router).

Installing the DLNA Application

To play content on the PC on the TV, you have to first install the application.

To use the DLNA function smoothly, use the

program in the CD-ROM supplied with the TV or use the Samsung PC Share Manager program corresponding to the TV

model that can be downloaded from the Samsung web site.

LAN

External Modem

(ADSL/VDSL/Cable TV)

LAN

LAN Cable

Wireless IP sharer

TV Side Panel

Samsung Wireless

LAN Adapter

LAN

BN68-02325A-04Eng.indb 42 2009-10-08 �� 9:54:01

English - 43

System Requirements

1. Insert the Programme CD supplied with this TV into your PC.

30MB of free hard disk space is needed for the programme installation.

If you share files, up to 30MB of hard disk drive space is required for each 100 files.

If you cancel file sharing, the hard disk drive space used for the thumbnail information is also freed.

Supported Formats

Image: JPEG/ Audio: MP3/ Video: AVI, MKV, ASF, MP4, 3GPP, PS, TS container. For detailed supported video formats, refer

to the ‘Playing a Movie File’ instructions.

Install the application

 



1. Run the Setup.exe file on the Programme CD supplied with the product.

Alternatively, you can download the file from www.samsung.com.

Install the SAMSUNG PC Share Manager as shown in the figures.

When the installation is complete, the PC Share Manager icon appears on your Desktop.

Double-click the icon to run the programme.

Using the DLNA Application

The Programme Screen Layout

3 4 5

6 7

1. Menus: The following application menus are

provided : File, Share, Server and Help.

Click to share the selected PC server folder.

Click to cancel sharing.

Click to refresh the PC folder and files.

Click to synchronize the share status.

The folders and files of the PC to be shared are

listed.

Folders shared by the user are listed.

●

BN68-02325A-04Eng.indb 43 2009-10-08 �� 9:54:01

English - 44

Sharing a Folder

You can share a folder from your PC to the TV.

Cancelling a Shared Folder

You can cancel a shared folder on your PC. Select a folder from the Shared Folder pane and select Unshare Folder.

Applying the Current Settings

Perform this when synchronization is necessary due to a new shared folder or cancelling a shared folder. The Set Changed State

menu applies changes to shared folders to the data saved with the PC share programme.

Since applying changes to the internal data is a time-consuming process, this function enables users to apply changes to the data

only when required. Until the Set Changed State menu is selected, the changed state of the shared folder is not applied to the

server. Changes to the shared folders are not applied to your PC until you select the Set Changed State menu.

Setting the Access Permission

To enable the TV to find your PC, the TV must be set to Set Device Policy in the Access Permission Settings window. In addition,

the PC server and the TV must be on the same subnet.

Method: Select the Share menu and select Set Device Policy. Rejected items are represented in gray. You can change the

access permissions by using the Allow Accept / Deny button. To delete an item, select the item and select Delete Item.

Server

You can run or stop using your PC as a server.

Run DLNA Digital Media Server when Windows Starts

You can determine whether to start the PC server automatically when Windows starts.

Change server name

You can rename the PC server.

Using the DLNA Function

Using the DLNA Menu

DLNA (Digital Living Network Alliance) enables content saved on a DLNA server (usually your PC) connected to your TV or over

a network to be played. Media Play enables playing content saved on a USB memory device connected to the TV, while DLNA

enables playing content saved on a DLNA server (your PC) connected to your TV or over the network. The procedures to use the

content are the same as those for Media Play (USB & DLNA).

Press the MEDIA.P button on the remote control to display the DLNA menu.

Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then press the ENTER

button.

To exit DLNA mode, press the MEDIA.P button on the remote control.

DLNA does not support the following functions.

The Background Music and Background Music Setting functions.

Sorting files by preference in the Photo, Music, and Movie folders.

The Change Group function.

The Copy / Delete function.

The Remove Safely function.

The REW/FF (

) key functions while a movie is playing.

Playing Movie Continuously (Resume Play) function.

The Skip function may not work with some container such as asf and mkv.

The Divx DRM, Multi-audio, embedded caption does not supported.

Samsung PC Share manager should be permitted by the firewall program on your PC.

The Skip (◄/► keys) or Pause function may not work while a movie is playing for the DLNA of other manufacturers,

depending on the corresponding content information.

The playing time may not be displayed while a movie is playing.

❑

■

●

❑

■



BN68-02325A-04Eng.indb 44 2009-10-08 �� 9:54:01

English - 45

ANYNET

Connecting Anynet

Devices

What is Anynet

Anynet

is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s

remote. The Anynet

system can be used only with Samsung devices that have the Anynet

feature. To be sure your Samsung

device has this feature, check if there is an Anynet

logo on it.

To connect to a TV

1. Connect the HDMI IN (1, 2, 3(DVI) or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet

device using an

HDMI cable.

To connect to Home Theatre

1. Connect the HDMI IN (1, 2, 3(DVI) or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet

device using an

HDMI cable.

2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet

device using an HDMI

cable.

Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on

the Home Theatre.

When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the

Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the

DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or

Home Theatre, not the TV.

Connect only one Home Theatre.

You can connect an Anynet

device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet

functions.

Anynet

works when the AV device supporting Anynet

is in the Standby or On status.

Anynet

supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

Anynet

Device 1

HDMI 1.3 Cable

Anynet

Device 2 Anynet

Device 3 Anynet

Device 4

Anynet

Device 1

HDMI 1.3 Cable

HDMI 1.3 CableHDMI 1.3 Cable

HDMI 1.3 Cable

Optical Cable

Anynet

Device 2 Anynet

Device 3 Anynet

Device 4

Home Theatre

HDMI 1.3 Cable HDMI 1.3 Cable

HDMI 1.3 Cable

BN68-02325A-04Eng.indb 45 2009-10-08 �� 9:54:03

English - 46

Setting Up Anynet

Press the TOOLS button to display the Tools menu. You can also display Anynet

menu by

selecting Tools→Anynet

(HDMI-CEC).

Setup

Anynet

(HDMI-CEC)→Off/On

To use the Anynet

Function, Anynet

(HDMI-CEC) must be set to On.

When the Anynet

(HDMI-CEC) function is disabled, all the Anynet+ related operations are

deactivated.

AutoTurnOff→No/Yes

Setting an Anynet

Device to turn Off automatically when the TV is turned Off.

The active source on the TV remote must be set to TV to use the Anynet

function.

If you set Auto Turn Off to Yes, connected external devices are also turned off when the

TV is turned off. If an external device is still recording, it may or may not turn off.

Switching between Anynet

Devices

1. Press the TOOLS button. Press the ENTER

button to select Anynet

(HDMI-CEC).

Press the ▲ or ▼ button to select Device List, then press the ENTER

button.

Anynet

devices connected to the TV are listed.

If you cannot find a device you want, press the red button to scan for devices.

Press the ▲ or ▼ button to select a particular device and press the ENTER

button. It

is switched to the selected device.

Only when you set Anynet

(HDMI-CEC) to On in the Application menu, the Device

List menu appears.

Switching to the selected devices may take up to 2 minutes. You cannot cancel the

operation during the switching operation.

The time required to scan for devices is determined by the number of connected devices.

When the device scan is complete, the number of devices found are not displayed.

Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to

the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.

If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet

function. Make sure to

switch to an Anynet

device by using the Device List.

Anynet

The Anynet

menu changes depending on the type and status of the Anynet

devices connected to the TV.

Anynet

Menu Description

View TV Anynet

mode changes to TV broadcast mode.

Device List Shows the Anynet

device list.

(device_name) MENU

Shows the connected device menus. E.g. If a DVD recorder is connected, the disc

menu of the DVD recorder will appear.

(device_name) INFO

Shows the play menu of the connected device. E.g. If a DVD recorder is connected,

the play menu of the DVD recorder will appear.

Recording: (*recorder)

Starts recording immediately using the recorder. (This is only available for devices that

support the recording function.)

Stop Recording: (*recorder) Stops recording.

Receiver Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is

connected, it will be represented as (*device_name).

❑

■

Move

Enter

Return

Anynet

(HDMI-CEC) :On▶

Setup

AutoTurnOff :Yes

MediaPlay(USB&DLNA)

Anynet

(HDMI-CEC)

ContentLibrary

Internet@TV

HomeNetworkCentre

Application

Move

Enter

Return

Anynet

(HDMI-CEC) :On

Setup

AutoTurnOff :Yes▶

Move

Enter

Return

ViewTV

DeviceList

Recording:DVDR

DVDRMENU

DVDRINFO

Receiver:Off

Setup

BN68-02325A-04Eng.indb 46 2009-10-08 �� 9:54:03

English - 47

TV Remote Control Buttons Available in Anynet

Mode

Device Type Operating Status Available Buttons

Anynet

Device

After switching to the device, when the

menu of the corresponding device is

displayed on the screen.

Numeric buttons

▲/▼/◄/►/ ENTER

buttons

Colour buttons / EXIT button

After switching to the device, while playing

a file

(Backward search) /

(Forward search) /

∫

(Stop) /

∂

(Play) /

∑

(Pause)

Device with built-in

Tuner

After switching to the device, when you

are watching a TV program

/ P

button

Audio Device When Receiver is activated

/ MUTE button

The Anynet

function only works when the active source on the TV remote control is set to TV.

The

∏

button works only while in the recordable state.

You cannot control Anynet

devices using the buttons on the TV. You can control Anynet

devices only using the TV remote

control.

The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet

device.

The Anynet

functions do not operate with other manufacturers’ products.

The

operations may differ depending on the device.

Recording

You can make a recording of a TV program using a Samsung recorder.

Press the TOOLS button. Press the ENTER

button to select Anynet

(HDMI-CEC).

Press the ▲ or ▼ button to select Recording Immediately and press the ENTER

button. Recording begins.

When there is more than one recording device

When multiple recording devices are connected, the recording devices are listed.

Press the ▲ or ▼ button to select a recording device and press the ENTER

button. Recording begins.

When the recording device is not displayed select Device List and press the Red

button to search devices

Press the EXIT button to exit.

You can record the source streams by selecting Recording: (device_name).

Pressing the

∏

button will record whatever you are currently watching. If you are watching video from another device,

the video from the device is recorded.

Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an

antenna to a recording device, refer to the recording device’s users manual.

Listening through a Receiver (Home theatre)

You can listen to sound through a receiver instead of the TV speaker.

Press the TOOLS button. Press the ENTER

button to select Anynet

(HDMI-CEC).

Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.

Press the EXIT button to exit.

If your receiver supports audio only, it may not appear in the device list.

The receiver will work when you have properly connected the optical in jack of the

receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.

When the receiver (home theatre) is set to On, you can hear sound output from

the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send

out 5.1 channel sound to the Home Theatre receiver. When the source is a digital component such as a DVD and is

connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre receiver.

If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power

failure), the Speaker Select may be set to External Speaker when you turn the TV on again.

Move

Enter

Return

ViewTV

DeviceList

Recording:DVDR

DVDRMENU

DVDRINFO

Receiver:Off

Setup

Move

Enter

Return

ViewTV

DeviceList

Recording:DVDR

DVDRMENU

DVDRINFO

Receiver:Off

Setup

BN68-02325A-04Eng.indb 47 2009-10-08 �� 9:54:04

English - 48

Troubleshooting for Anynet

Problem Possible Solution

Anynet

does not work. Check if the device is an Anynet

device. The Anynet

system supports Anynet

devices only.

Connect only one receiver (home theatre).

Check if the Anynet

device power cord is properly connected.

Check the Anynet

device’s Video/Audio/HDMI 1.3 cable connections.

Check whether Anynet

(HDMI-CEC) is set to On in the Anynet

setup menu.

Check whether the TV remote control is in TV mode.

Check whether it is Anynet

exclusive remote control.

Anynet

doesn’t work in certain situations. (Searching channels, Operating Media Play,

Plug & Play, etc.)

When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or

turn your TV off and on again.

Check if the Anynet

Function of Anynet

device is set on.

●

I want to start Anynet

Check if the Anynet+ device is properly connected to the TV and check if the Anynet

(HDMI-CEC)

is set to On in the Anynet

Setup menu.

Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to

show the Anynet

menu and select a menu you want.

●

I want to exit Anynet

. Select View TV in the Anynet

menu.

Press the SOURCE button on the TV remote control and select a device other than Anynet

devices.

Press P

, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button

operates only when a tuner-embedded Anynet

device is not connected.)

●

The message

‘Connecting to Anynet+

device...’ appears on the

screen.

You cannot use the remote control when you are configuring Anynet

or switching to a view

mode.

Use the remote control when the Anynet

setting or switching to view mode is complete.

●

The Anynet

device does

not play.

You cannot use the play function when Plug & Play is in progress.

●

The connected device is

not displayed.

Check whether or not the device supports Anynet

functions.

Check whether or not the HDMI 1.3 cable is properly connected.

Check whether Anynet

(HDMI-CEC) is set to On in the Anynet

setup menu.

Search Anynet

devices again.

You can connect an Anynet

device using the HDMI 1.3 cable only. Some HDMI cables may not

support Anynet

functions.

If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord

or a power failure, please repeat the device scan.

●

The TV program cannot

be recorded.

Check whether the antenna jack on the recording device is properly connected.

●

The TV sound is not

output through the

receiver.

Connect the optical cable between TV and the receiver.

●

BN68-02325A-04Eng.indb 48 2009-10-08 �� 9:54:04

English - 49

CONTENT LIBRARY

Using the Content Library

The Content Library allows you to enjoy various content on your TV. You can use the default

content stored in the TV memory or you can enjoy new content using a USB device.

Using the Remote Control Button in Content Library Menu

Button Operations

▲/▼/◄/► Move the cursor and select an item.

ENTER

Select the currently selected item.

RETURN Return to the previous menu.

EXIT Stop the current function and return to the Content Library main menu.

Stop Content Library mode and Returns to TV mode.

Colour button Keys that provide functions are described on the corresponding page.

/ MUTE

You can control the volume of the played content.

CONTENT LIBRARY CONTAINS TEXT, GRAPHICS, IMAGES, MULTIMEDIA, AND OTHER MATERIALS FOR

INFORMATIONAL AND PROMOTIONAL PURPOSES ONLY. MATERIALS IN CONTENT LIBRARY HAS BEEN MODIFIED AND

KEEPS BEING REVISED AND UPDATED. THE MATERIALS IN THE CONTENT LIBRARY MAY NOT BE SUITABLE FOR ALL

AUDIENCES.

INFORMATION IN THE CONTENT LIBRARY IS PROVIDED ‘AS IS.’ ALTHOUGH THE INFORMATION PROVIDED TO YOU

IN THE CONTENT LIBRARY IS OBTAINED OR COMPLIED FROM SOURCES WE BELIEVE TO BE RELIABLE, SAMSUNG

CANNOT AND DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS OR COMPLETENESS

OF ANY INFORMATION OR DATA MADE AVAILABLE TO YOU FOR ANY PARTICULAR PURPOSE. UNDER NO

CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE HELD LIABLE, WHETHER IN CONTRACT OR TORT,

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES,

OR ANY OTHER DAMAGES WHATSOEVER ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION

CONTAINED IN, OR THE USE OF, THE CONTENT LIBRARY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Using the Contents

You can use enjoy content stored in the TV memory.

To return to Content Library main menu, press the EXIT button.

The volume display does not appear but you can control the volume.

Gallery

This function plays a SlideShow with high resolution images and background music and

produces various atmospheres. Using the Gallery function of the TV, you can change your home

atmosphere.

The copyrights of the Gallery contents and all issues related to them are reserved by

TimeSpace, Inc.

Press the ENTER

button to pause the SlideShow, and also press the ENTER

button to resume the SlideShow.

Press the INFO button to display information on the selected photo. (This is not displayed if the photo has no information.)

Cooking

You can view various recipes and then easily follow them step by step. Enjoy these contents which will give you great ideas for

meals.

The recipes introduced in the Cooking contents on the Samsung TV are based on recipes published by Anness Publishing.

The copyrights of the Cooking contents and all issues related to them are reserved by Practical Pictures.

❑

Return

Exit

Gallery

Gallery Cooking Game Children Wellness

Return

Exit

Gallery

Gallery Cooking Game Children Wellness

BN68-02325A-04Eng.indb 49 2009-10-08 �� 9:54:04

English - 50

Game

This category provides entertainment games for the whole family.

For the buttons used in the games, refer to the directions on the screen.

Colour Buttons for Games

Button Operations

Red Press to move to the game home screen

Green Press to pause the game

Yellow Option Key

Blue Press to exit the game

Children

This is educational and interactive content that children can watch repeatedly.

The copyrights of the Children contents and issues related to them reserved by UpToTen.

Wellness

This is beneficial health management content that can be enjoyed by the whole family.

Using the Content Management

Content Management

You can select multiple content items by selecting content items repeatedly and pressing

the Yellow button.

My Contents

You can check the content saved in the TV memory for each subitem of the Content Library.

Select a content item and press the ENTER

button. You can play or delete the selected

content item.

USB

You can check the content saved on the USB device for each subitem of the Content Library.

Select a content item and press the ENTER

button. You can play the selected content

item.

Content Library only supports USB Mass Storage Class devices (MSC). MSC is a

Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives

and Flash Card Readers.

Playing a game using an external USB memory device will allow you to save your game (depending on the game). Take

care as removing the USB memory device while saving data to the USB memory device may cause the data to be lost.

Downloading New Contents

New content other than the built-in content will be provided via the Samsung.com website free of charge. When you

download the paid contents, you need UDN number to download contents. Check the UDN number before downloading a

new content item.

Downloading Content

Visit the www.samsung.com website.

Select a content item in the Contents Download page.

Download the contents onto the USB memory device.

Go to Content Library main menu by pressing CONTENT button or choosing Content Library

(MENU → Application→ContentLibrary).

Plug the USB memory into USB port on the side of the TV.

You can see the content sub item which you downloaded.

Select a content item and press the ENTER

button.

You can play the selected content item.

Setup

Screen Saver Run Time

: Select to set the waiting time before the screen saver appears.

Save UDN: Saves the UDN number to a USB device.

An NTFS format USB storage device does not support saving UDN. We recommend using a FAT format USB storage device.

❑

■

●

■

●

•

■

●

Content

Management

Return

Exit

Game Children Wellness Others Content

Management

Return

Exit

1/1



MyContents

USB

Setup

TVMemory

17.16GB/189.00MBAvailable

Gallery

Cooking

Game

Children

Wellness

ContentManagement>MyContents

BN68-02325A-04Eng.indb 50 2009-10-08 �� 9:54:05

English - 51

INTERNET@TV

If you have some problems while using a widget service, please contact to content provider. In the widget, press the green button

and get information of contact or refer to help website for widget provider information.

English may be only supported in widget service depending on region.

This function may not be supported depending on your country. (Not available in all locations)

Getting Started with Internet@TV

Internet@TV provides an integrated Internet and television experience powered by the Yahoo!® Widget Engine. You can monitor

financial stocks, share photos with friends and family, and track news and weather all through the Internet@TV service on your

television.

If Network condition is unstable, this function may not work. Then, TV would be turned off automatically. Otherwise turn off the

TV using power button.

You may experience slow operation or hesitation when using this function due to network conditions.

When running Internet@TV for the first time, the basic settings proceed automatically.

The first step is to set up your network. For more information on how to configure your network, refer to ‘Setting the Network’.

After your network is operational, the Internet@TV software guides you through a step-by-step setup wizard.

Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTER

button.

Press the ▲ or ▼ button to select Internet@TV, then press the ENTER

button.

Internet@TV starts.

Press the INTERNET@ button on the remote control to display the

Internet@TV menu.

The General Disclaimer is displayed on the screen. Select I accept or I do not

accept.

For more information on the General Disclaimer, refer to the ‘Legal Notice’.

The ‘welcome screen’ is the starting point of the Internet@TV guided setup.

If you select Exit Setup, this step is resumed when you press the

INTERNET@ button.

Select Let’s get started!

5. Choosing your location allows TV Widgets to use localized content.

Select your country from the list provided.

Accepting the Yahoo!® TV Widget Engine Privacy Policy is required to use

Internet@TV.

Select OK, I Accept.

Accepting the Yahoo!® TV Widget System Terms of Service is required to use Internet@TV.

Select OK, I Accept.

Enter your name to setup your profile. Each profile has its own list of widgets. You

can create a profile for each person who uses Internet@TV.

Enter your name and select Save this name.

For more information, refer to Using the Profile Widget’.

Internet@TV tests the network connection.

If the test fails, configure your network again.

For more information, refer to ‘Setting the Network’.

10.

The guided setup is complete. A tutorial on how to use Internet@TV is next.

Select Continue to view the tutorial.

Select Exit setup to start using Internet@TV now.

To run the tutorial again, select ProfileWidget→SystemSetting→RepeatTutorial.

11.

Press the INTERNET@ button on the remote control to display the Internet@TV user interface.

WelcometoYahoo!®TVWidgets!

Yahoo!TVWidgetsbringthebestoftheinternetto

yourTV!Youcangetupdatedweatherconditionsor

sportsscores,getupdatedinformationonstocks,or

evenviewfull-screenphotosandvideo!

Wejustneedtogetafewthingssetup,andyou’llbe

onyourway!

Let’sgetstarted! Exitsetup

What’syourname?

Eachpersoninthehousewho

usestheTVcanhavetheirown

personalizedsetofwidgets.

We’llkeeptrackofthese

individualwidgetprofilesbythe

nameyouenter,Enterthename

YOUwanttousenow.

Savethisname

Skipthisstep Exitsetup

BN68-02325A-04Eng.indb 51 2009-10-08 �� 9:54:05

English - 52

Screen display

Dock mode

1 A welcome banner is shown with your profile name in the top right

corner.

This banner disappears after a short delay.

2 The banner highlights two remote control shortcuts.

If you press the blue button (Viewport) on your remote control,

the display is toggled between ‘Viewport mode’ and ‘Overlay

mode’. In Viewport mode, the TV or video plays in a scaled-down

area with graphics outside. In overlay mode, the graphics are

displayed on top of the TV or video.

If you press the yellow button (Edit Snippet) on your remote

control, a help window is displayed and the snippet with focus

can be edited.

3 Press the INTERNET@ button on the remote control to begin.

The horizontal list at the bottom of your TV screen is called ‘the dock’.

The items in the list are called ‘snippets’.

A snippet is a shortcut which launches a TV Widget.

A TV Widget is an Internet application designed to run on your TV.

Move between snippets by pressing the ◄ or ► buttons on the remote control.

Focus is located in the left most region (highlighted in blue).

The dock slides snippets under that focal point.

Launch a TV Widget by pressing the ENTER

button on the remote control when its snippet is in focus.

When you add snippets, they form a stack which you can navigate by pressing the ▲ or ▼ buttons.

Two special TV Widgets appear in the dock: the Profile Widget and the Gallery Widget. These cannot be deleted.

The dock will slide off screen after a timeout period.

Sidebar mode

1 Focus on a snippet and press the ENTER

button to launch the TV

Widget sidebar. The TV Widget logo and Home are at the top of the

sidebar.

2 Current menu is displayed under the TV Widget logo.

To return to a previous screen, select it and press the ENTER

button.

You can also press the RETURN button on the remote control.

3 Current selection is always highlighted in blue. The highlighted button

has focus and is activated when you press the ENTER

button.

4 When there is a lot of data, a page control is used.

Current page and total pages are displayed.

Move between pages by pressing ◄ or ► buttons.

5 The bottom toolbar includes colour buttons that correspond to the red, green, yellow and blue buttons on the remote control.

Red button: Close the widget.

Green button: Change the widget’s setting.

Yellow button: Manage your snippets.

Blue button: Size video to fit, or make it full screen.

Some buttons may not be available depending on widget.

❑

■

•

WEATHER WidgetGallery FINANCE

Signedinas

John

HelloJohn!

5:15AMMonJanuary19th



Viewport



EditSnippet

MyStocks

Toremoveastockssymbol,please

selectitfromthelistbelow.

DisplayFormat Value

AboutYahoo!Finance...

FINANCE

 PAGE1OF2 

^DJI

^IXIC

YHOO

AAPL

INTC

AMZN

AddNewSymbol...

ImportSymbolsFromYahoo!...

BN68-02325A-04Eng.indb 52 2009-10-08 �� 9:54:07

English - 53

Editing Snippets in the Dock

1. Edit a snippet by focusing on it in the dock and pressing the yellow button.

The snippet moves to the Second position and its tile slides up to show the following help text:

Delete (red button): Remove this TV Widget.

Deleted widgets can be re-installed using the Widget Gallery.

Move (blue button): Re-order the snippet. Press the ◄ or ► button to scroll. Press the yellow button to drop into the new

position.

Done (yellow button): Exit the Edit Snippet menu.

Using the Profile Widget

The Profile Widget configures your user profile.

You can set up multiple profiles, and each profile maintains its own list of widgets.

The Switch Profile menu allows you to switch to a different user profile.

At least two profiles must be registered. If you want to add a profile, refer to ‘Administrative

Controls’.

•

All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark

and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You

may not use any content or services in a manner that has not been authorized by the content owner or service provider. Without

limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you may not modify,

copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium

any content or services displayed through this device.

YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE RISK AND THAT THE

ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE AND ACCURACY IS WITH YOU. THE DEVICE AND

ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED. SAMSUNG EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO

THE DEVICE AND ANY CONTENT AND SERVICES, EITHER EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED

TO, WARRANTIES OF MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE,

OF ACCURACY, OF QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG DOES

NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT

OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT WARRANT THAT THE DEVICE, CONTENT

OR SERVICES WILL MEET YOUR REQUIREMENTS, OR THAT OPERATION OF THE DEVICE OR SERVICES WILL BE

UNINTERRUPTED OR ERROR-FREE. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE

LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL

DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH,

ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF THE DEVICE, OR ANY CONTENT OR SERVICE

ACCESSED BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Third party services may be changed, suspended, removed, terminated or interrupted, or access may be disabled at any time,

without notice, and Samsung makes no representation or warranty that any content or service will remain available for any

period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which

Samsung has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any responsibility or

liability for any change, interruption, disabling, removal of or suspension of any content or service made available through this

device. Samsung may impose limits on the use of or access to certain services or content, in any case and without notice or

liability.

Samsung is neither responsible nor liable for customer service related to the content and services. Any question or request for

service relating to the content or services should be made directly to the respective content and service providers.

Signedinas

John

SwitchProfile

SignoutofYahoo!

AdministrativeControls

SystemSettings

ProfileSettings

PROFILE

BN68-02325A-04Eng.indb 53 2009-10-08 �� 9:54:07

English - 54

The Profile Settings menu allows you to customize and protect your profile.

User profiles can be customized with a unique Name and an Avatar (a picture used to represent your profile).

Your profile’s Name and Avatar are displayed in the profile snippet in the dock.

Profiles can be protected by Create Profile PIN.

When setting the PIN for the first time, you can set a Security Question.

The Profile Settings menu can limit access to widgets.

If you forget your Profile PIN you can answer a SecurityQuestion that is associated with your profile.

A profile that has the Limit Profile indicator turned on will not allow new widgets to be installed.

The Owner PIN must be set to use this function. To set the Owner PIN, refer to ‘Administrative Controls’

The System Settings menu allows you to:

Change your Location and set your Zip Code (US only) to tailor the content to your region.

Repeat Tutorial that was shown during guided setup.

Restore Factory Settings to delete all widget configurations and information.

In the Administrative Controls menu you can:

Set the Screen Saver timeout to avoid screen burn in.

Create Owner PIN and set a SecurityQuestion to control other profiles.

Create a new Profile which can be configured with a different set of widgets.

Delete an existing profile.

From the Profile Widget you can Sign in to Yahoo!® using your Yahoo! ID.

If you have a Yahoo! ID, you can access your personalized content using the Yahoo! TV Widgets.

All Yahoo! TV Widgets that are installed are automatically signed-in with your profile’s Yahoo! ID.

If you have no Yahoo! account, visit www.yahoo.com and create an account.

You may fail to log in with an ID created on the Yahoo website in a country that does not support Internet@TV.

About Profile widget

Press the green button.

You can view a brief description of the Profile Widget, Copyright Policy, Terms of Service, and Privacy Policy.

Using the Yahoo!® Widget Gallery

Use the Yahoo!® Widget Gallery to add more widgets to your TV.

View available TV Widgets in the following categories:

Latest Widgets: Displays recently updated widgets.

Yahoo!® Widgets: Displays widgets provided by Yahoo!®.

Samsung Widgets: Displays widgets provided by Samsung.

More Categories: Displays all widgets by category.

To install a widget, navigate to the detail screen and select Add Widget to My Profile and

press the ENTER

button. The widget is installed and becomes available in the dock.

Widget Gallery Settings

Press the Green button.

About Yahoo! Widget Gallery...

You can view brief information for the Widget Gallery, Copyright Policy, Terms of Service, and

In the Developer Settings menu You can make your own widget.

For more information on creating your own widget, visit our developer site at http://connectedtv.yahoo.com/

●

❑

●

❑

■

Yahoo!News

byYahoo!

SamsungWidgets

WidgetGallery

 





LatestWidgets

Yahoo!Widgets

V0.9.0

Categories

NEWS

 PAGE1OF2 

NEWSHEADLINES

TopStories

Business

Potics

Sports

Technology

MoreCategories

BN68-02325A-04Eng.indb 54 2009-10-08 �� 9:54:07

English - 55

Using the Yahoo!® Weather Widget

The Yahoo!® Weather Widget provides updates on your local and favourites weather locations.

This content dynamically changes with weather conditions.

Press the green button on the remote control to display the Yahoo!® Weather Widget Settings

menu.

From the Settings menu you can add or remove a city for which you want to view weather

information.

From the Settings menu:

Add New City by entering the name of the city. Once the search results are displayed, select

the city you want and press the ENTER

button.

Delete City by selecting the city you want to delete from the city list. Press the ENTER

button and confirm the deletion.

Changing the Temperature Indication Mode

You can change the temperature indication mode to Imperial or Metric. For example, Imperial

will show temperatures in Fahrenheit and Metric in Celsius.

Create a snippet for a favourites city

Select the city from the Yahoo!® Weather Widget’s home page and view the detailed weather information.

Press the yellow button.

Select the Add Snippet menu and press ENTER

to add the city as a snippet.

Delete a snippet for a city

Launch the snippet.

Press the yellow button.

Select the Delete Snippet menu and press ENTER

to remove the snippet.

Using the Yahoo!® News Widget

The Yahoo!® News Widget provides the latest headline news for business, entertainment, politics,

sports, top stories, and many other categories.

Select a category, select a headline within the category, and view a dynamically updated news

summary.

●

❑

●

❑

●

51°

SanFrancisco,CA

Sunnyvale,CA

Paris,France

London,England

NewYork,NY

Sunnyvale

Cloudy

WEATHER

World

NEWS

 





BN68-02325A-04Eng.indb 55 2009-10-08 �� 9:54:07

English - 56

Using the Yahoo!® Flickr Widget

The Flickr Widget can provide you access to your favourites photos from friends and family while

watching TV. Share your photos with your family on your big screen TV through a slideshow.

Personalize the Flickr Widget by logging in with your Yahoo! ID.

For detailed procedures on log in, refer to the ‘Using the Profile Widget’ instructions.

For more information on Flickr, visit http://www.flickr.com.

Your Photos shows photos you have registered with Flickr website.

To view Flickr photos in a slideshow:

Select a thumbnail of a photo and press the ENTER

button to view the photo’s details.

Select Start Slideshow and press the ENTER

button.

To control the slideshow display:

Press the ENTER

button during a slideshow.

The thumbnails of photos are displayed on the bottom of the screen.

When the slideshow control is displayed, you can Pause, Play and Stop the slideshow.

If you select the menu and press ENTER

, you can view information for the selected

photo.

The Your Sets menu allows you to view photos you have classified in Flickr.

The Explore menu allows you to explore photos featured by the Flickr website. You can view the photos updated daily.

The Mark as Favourite or Remove From Favourites menu moves photos to your favourites Photos set or removes photos

from it.

The Favourite Photos menu allows you to see the photos you have classified as favourites.

The Your Contacts menu allows you to see updates from family and friends.

The Your Groups menu allows you to select your favourites groups from the Flickr website to share and enjoy photos with the

Flickr community of users.

To configure the Yahoo!® Flickr Widget Settings press the green button on the remote control.

The Time Per Slide menu controls the speed of the slideshow.

The Repeat menu will restart the slideshow at the beginning after the last photo is shown.

Using the Yahoo!® Finance Widget

View stock information and the latest stock news with the Yahoo!® Finance Widget.

Press the green button to set up your stocks.

Use the Add New Symbol menu to enter the name of a new stock.

Select the stock you want to add from the search results and select the Add Symbol menu and

press the ENTER

button.

The selected stock is added to the My Stocks list.

Use the Import Symbols From Yahoo!® menu to retrieve your Yahoo!® Finance portfolio.

The Merge Symbols menu merges the symbols in the Yahoo!® Finance Widget with the

symbols from your portfolio.

The Import Symbols menu deletes the symbols in the Yahoo!® Finance Widget and

replaces them with the symbols from your portfolio.

Use the Display Format menu to change the stock-price fluctuation transition to Value or

Percentage.

Create a snippet for a favourites stock.

Select the stock symbol from the Yahoo!® Finance Widget’s home page and view the detailed finance information.

Press the yellow button.

Select the Add Snippet menu and press ENTER

to add the stock as a snippet.

Delete a snippet

Launch the snippet from the dock

Press the yellow button.

Select the Delete Snippet menu and press ENTER

to remove the snippet.

●

■

●

■

●



●



●



YourPhotos

YourSets

Explore

FavouritePhotos

YourContacts

YourGroups

MyStocks

Toremoveastockssymbol,plase

selectitfromthelistbelow.

DisplayFormat Value

AboutYahoo!Finance...

FINANCE

 PAGE1OF2 

^DJI

^IXIC

YHOO

AAPL

INTC

AMZN

AddNewSymbol...

ImportSymbolsFromYahoo!...

BN68-02325A-04Eng.indb 56 2009-10-08 �� 9:54:08

English - 57

Troubleshooting for internet@TV

Problem Possible Solution

Some widget services do not work. Check with that service provider.

In the widget, press the green button and get contact information or refer to

help website for widget service provider information.

Refer to Help website page.

Some widget contents only have English. How

can I change the language?

Widget content language may be different from widget user interface language.

It depends on service provider.

After factory reset, Yahoo Widget service

doesn’t work and warning message is

displayed.

After factory reset, turn off and on your TV. Then restart Internet@TV.

At the Flickr widget, I logged in my account.

But, I can’t view my picture.

Visit Yahoo Web site, and activate your Flickr account at your Yahoo! ID.

At the Profile widget, I did change location,

but the previous setting still remains.

Turn off and on your TV. Then restart Internet@TV.

Now, you can enjoy widget services supported in changed location.

Help Website

Approaching step may be changed later on.

It can be different links for special countries.

Country Website

Austria www.samsung.com → Produkte → Fernseher → [email protected] → Internet@TV

Belgium

www.samsung.com → Producten → televisies → [email protected] → Internet@TV

www.samsung.com → Produits → téléviseurs → [email protected] → Internet@TV

Czech www.samsung.com → Produkty → televizory → [email protected] → Internet@TV

Denmark www.samsung.com → Produkter → stue & soveværelse → [email protected] → Internet@TV

Finland www.samsung.com → Tuotteet → kodinelektroniikka → [email protected] → Internet@TV

France www.samsung.com → Produits → télévisions → [email protected] → Internet@TV

Germany www.samsung.com → Privatkunden → Fernseher → [email protected] → Internet@TV

Greece www.samsung.com → Προϊόντα → τηλεοράσεις → [email protected] → Internet@TV

Hungary www.samsung.com → Termékek → televíziók → [email protected] → Internet@TV

Ireland www.samsung.com → Products → Television → [email protected] → Internet@TV

Italy www.samsung.com → Prodotti → TV → [email protected] → Internet@TV

Netherlands www.samsung.com → Producten → televisies → [email protected] → Internet@TV

Norway www.samsung.com → Produkter → hverdagsrom & soverom → [email protected] → Internet@TV

Poland www.samsung.com → Produkty → telewizory → [email protected] → Internet@TV

Portugal www.samsung.com → Produtos para Consumidores → televisores → [email protected] → Internet@TV

Slovakia www.samsung.com → Produkty → televízory → [email protected] → Internet@TV

Spain www.samsung.com → Productos → televisores → [email protected] → Internet@TV

Sweden www.samsung.com → Produkter → vardagsrum & sovrum → [email protected] → Internet@TV

Switzerland

www.samsung.com → Produits → télévisions → [email protected] → Internet@TV

www.samsung.com → Produkte → Fernseher → [email protected] → Internet@TV

United Kingdom www.samsung.com → Products → Television → [email protected] → Internet@TV

Turkey www.samsung.com → Tüketici Ürünleri → televizyon → [email protected] → Internet@TV

Estonia www.samsung.com → Klientidele → Televiisorid → [email protected] → Internet@TV

Latvia www.samsung.com → Klientiem → Televizori → [email protected] → Internet@TV

Lithuania www.samsung.com → Namams → Televizoriai → [email protected] → Internet@TV

Russia www.samsung.com → Продукты → Телевизоры → [email protected] → Internet@TV

Ukraine www.samsung.com → Потребительские продукты → телевизоры → [email protected] → Internet@TV

BN68-02325A-04Eng.indb 57 2009-10-08 �� 9:54:08

English - 58

INTERNET@TV

This function may not be supported depending on your country. (Not available in all locations)

If you have some problems while using a widget service, please contact to service provider.

In the widget, press the green button and get contact information or refer to help website for service provider information.

English may be only supported in widget service depending on region.

Getting Started with Internet@TV

Internet@TV provides SAMSUNG’s widget services through a network connection. Internet@TV contents can be changed

depending on contents provider. You can access various information such as YouTube, through the Internet@TV service.

The configuration of Widgets and their provided services may differ according to the selected country. After changing country,

turn off and on the TV. Then you can use widget service supported changed country. If Country is set to Others, TV can’t

recognize your country. In this case, please select directly from the service country list.

If a certain content’s font provided by contents provider is not supported on TV, It may not be viewed normally.

For more information on how how to configure your country, refer to the ‘Plug & Play Feature’ instructions.

You may experience slow operation or hesitation when using this function due to network conditions.

Before using Internet@TV, set up the network first. For more information on how to configure your network, refer to ‘Setting

the Network’.

When running Internet@TV for the first time, the basic settings proceed automatically. It may take few minutes to update.

Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTER

button.

Press the ▲ or ▼ button to select Internet@TV, then press the ENTER

button.

Press the Internet@ button on the remote control to display the Internet@TV menu.

The ‘User Agreement’ is displayed. Select Agree to accept the agreement.

The ‘Statistics & Analysis’ is displayed. Select Agree to accept the agreement.

Setting up Internet@TV

You can check and use the menus regarding Single Sign On (SSO), system management and properties. Press the ▲ or ▼

button to select Setup, then press the ENTER

button.

Single Sign On

You can use this menu when creating, deleting the account.

Using the Single Sign On, you can control your account including contents site’s account information.

You don’t need additional log in.

Account is only for internet@TV.

Create Account

You can create account and be linked with desired service site.

Account will be made less than 10.

Character of Account should be limited to 10.

If there is no service that needs log in, you can not create account.

Account Management

Service Site: You can register log in information of service site (such as YouTube).

Change Password: Change the password of your account.

Delete: Delete the account.

If you forget the password of account, press the remote control buttons in the following sequence, which resets the

Internet@TV: POWER (Off)→MUTE→9→4→8→POWER (On).

If you use this function, all accounts will be deleted.

❑

■

●

BN68-02325A-04Eng.indb 58 2009-10-08 �� 9:54:08

English - 59

System Setup

Ticker Autorun, Ticker Duration may not be supported depending on country.

Change the Service Lock password

The default password number of a new TV set is 0-0-0-0.

If you forget the password, press the remote control buttons in the following sequence, which resets the password to 0-0-0-0:

POWER (Off) →MUTE→8→2→4→POWER (On).

Service Duration

Select to set the service duration time before the screen saver appears.

TickerAutorun→Off/On

Select to set ticker to run automatically or not when turning on the TV.

Ticker Duration

Select to set the service duration time before the screen saver appears.

Properties

Display information of Internet@TV.

You can measure the speed of your Internet TV service using Measuring the speed of the Internet TV service.

Using the Internet@TV service

In a widget that provides multiple category menus, you can view the contents of the category menus using the ◄ and ► buttons.

Account Login

1. Press the Red button.

Select desired User account, then press the ENTER

button.

Input the password.

When login succeeds, User account will be displayed on the screen.

Before login, at least one and more account should be registered. If you want to create account, refer to ‘Setting up

Internet@TV’.

Using the Widget Gallery

You can use Run Service, Lock, Install Service at the existing widget and you can see description of the widget service that isn’t

installed.

On the Internet@TV, you can add and use various widgets provided by service provider. It may vary according to contents

provider.

Run Service: Runs the widget service.

Lock: Set the service lock

Install Service (or Delete Service): Install or delete widget service.

Using the YouTube Widget

You can watch the movie provided by YouTube.

If you have the account in YouTube, Register account information using Account

management. Then, you can use My Favourites category.

The menu can be changed by web service.

There may be inappropriate contents for child. In this case, use Lock function in

Widget Gallery.

❑

■

❑

●

MostViewed

TopRated

MostPopular

MostDiscussed

TopFavourites

MostLinked

MostRespomded

Featured

ChangeMode



Changepage

Move

OK

Return

Today 1/7

SeekingJusticeDecadesLater

Views:819,252Rating: 2009-02-07

0:01:30

BreakingNewsAlertsbyE-Mail

Views:819,252Rating: 2009-02-07

0:00:45

TheworldreactstoU.S.bailoutplan

Views:819,252Rating: 2009-02-07

0:01:30

BooHoointheBoardroom

Views:819,252Rating: 2009-02-07

0:03:26

BN68-02325A-04Eng.indb 59 2009-10-08 �� 9:54:08

English - 60

Troubleshooting for internet@TV

Problem Possible Solution

Some widget services do not work. Check with that service provider.

In the widget, press the green button and get contact information or refer to help

website for widget service provider information.

Refer to Help website page.

What is the advantage of single sign

on?

If you create account and register your login information of desired service, you can

access personalized content without additional login.

When a network error occurred, I can’t

use other menus except setting menu.

If network connection doesn’t work, your service might be limited.

Because all of function except setting menu are needed to connect internet.

Is there any possibility to show adult

movies on YouTube?

Basically, at the list on the menu it is filtered out. But by using search function, It can

be shown. In this case, using the Widget Gallery lock the widget service.