Yamaha HTR-5930 de handleiding

Merk: Yamaha

Model: HTR-5930

Categorie: AV-ontvangers

Type: de handleiding

Deze handleiding is ook geschikt voor

HTR-5940

HTR-5930

AV Receiver

OWNER’S MANUAL

01EN_HTR-5930_U_cv-1.fm Page 1 Monday, December 12, 2005 8:55 AM

IMPORTANT SAFETY INSTRUCTIONS

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle

is intended to alert you to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

1 Read Instructions – All the safety and operating instructions

should be read before the product is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the product and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and use instructions

should be followed.

5 Cleaning – Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

6 Attachments – Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

7 Water and Moisture – Do not use this product near water –

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool;

and the like.

8 Accessories – Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall,

causing serious injury to a child or adult, and serious

damage to the product. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the product. Any mounting of the product should

follow the manufacturer’s instructions, and should use a

mounting accessory recommended by the manufacturer.

9 A product and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may

cause the product and cart combination to

overturn.

10 Ventilation – Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the product on a bed,

sofa, rug, or other similar surface. This product should not

be placed in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

11 Power Sources – This product should be operated only from

the type of power source indicated on the marking label. If

you are not sure of the type of power supply to your home,

consult your product dealer or local power company. For

products intended to operate from battery power, or other

sources, refer to the operating instructions.

12 Grounding or Polarization – This product may be equipped

with a polarized alternating current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

13 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the product.

14 Lightning – For added protection for this product during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line

surges.

15 Power Lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touching

such power lines or circuits as contact with them might be

fatal.

16 Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result

in a risk of fire or electric shock.

17 Object and Liquid Entry – Never push objects of any kind

into this product through openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on

the product.

18 Servicing – Do not attempt to service this product yourself

as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19 Damage Requiring Service – Unplug this product from the

wall outlet and refer servicing to qualified service personnel

under the following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the

product,

c) If the product has been exposed to rain or water,

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810–20)

GROUNDING CONDUCTORS

(NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

d) If the product does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the product to its normal

operation,

e) If the product has been dropped or damaged in any

way, and

f) When the product exhibits a distinct change in perfor-

mance - this indicates a need for service.

20 Replacement Parts – When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer or have the same

characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other

hazards.

21 Safety Check – Upon completion of any service or repairs to

this product, ask the service technician to perform safety

checks to determine that the product is in proper operating

condition.

22 Wall or Ceiling Mounting – The unit should be mounted

to a wall or ceiling only as recommended by the

manufacturer.

23 Heat – The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

24 Outdoor Antenna Grounding – If an outside antenna or

cable system is connected to the product, be sure the antenna

or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, specifies

that the cable ground shall be connected to the grounding

system of the building, as close to the point of cable entry as

practical.

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC, to

use the product.

2 IMPORTANT: When connecting this product to

accessories and/or another product use only high quality

shielded cables. Cable/s supplied with this product MUST

be used. Follow all installation instructions. Failure to

follow instructions could void your FCC authorization to

use this product in the USA.

3 NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15

for Class “B” digital devices. Compliance with these

requirements provides a reasonable level of assurance that

your use of this product in a residential environment will

not result in harmful interference with other electronic

devices.

This equipment generates/uses radio frequencies and, if

not installed and used according to the instructions found

in the users manual, may cause interference harmful to the

operation of other electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this

product is found to be the source of interference, which

can be determined by turning the unit “OFF” and “ON”,

please try to eliminate the problem by using one of the

following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

iii

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool,

dry, clean place – away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 30 cm on the top,

20 cm on the left and right, and 20 cm on the back of

this unit.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in a environment with high humidity (i.e. a room with

a humidifier) to prevent condensation inside this

unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit,

do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power

cord and outdoor antennas disconnected from a

wall outlet or the unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power plug

from the wall outlet.

16 Install this unit near the AC outlet and where the AC

power plug can be reached easily.

17 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

18 Before moving this unit, press STANDBY/ON to set

this unit in the standby mode, and disconnect the

AC power plug from the wall outlet.

19 VOLTAGE SELECTOR (Asia and General models

only)

The VOLTAGE SELECTOR on the rear panel of this

unit must be set for your local main voltage BEFORE

plugging into the AC wall outlet.

Voltages are 110–120/220–240 V AC, 50/60 Hz.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer

Electronics Group want you to get the most out of your

equipment by playing it at a safe level. One that lets the sound

come through loud and clear without annoying blaring or

distortion – and, most importantly, without affecting your

sensitive hearing.

Since hearing damage from loud sounds is often

undetectable until it is too late, YA M A H A and the

Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid

prolonged exposure from excessive volume levels.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet, even

if this unit itself is turned off by STANDBY/ON. This

state is called the standby mode. In this state, this unit

is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

IMPORTANT

Please record the serial number of this unit in the space

below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

PREPARATIONINTRODUCTION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

FEATURES............................................................. 2

GETTING STARTED............................................ 3

Supplied accessories .................................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel ................................................................. 4

Remote control........................................................... 6

Front panel display .................................................... 8

Rear panel .................................................................. 9

CONNECTIONS .................................................. 10

Placing speakers....................................................... 10

Connecting speakers ................................................ 11

Information on jacks and cable plugs ...................... 13

Connecting video components................................. 14

Connecting audio components................................. 17

Connecting the FM and AM antennas ..................... 18

Connecting the power cable..................................... 19

Turning on the power............................................... 19

SETUP ................................................................... 20

Using BASIC MENU .............................................. 20

PLAYBACK.......................................................... 23

Basic operations....................................................... 23

Additional operations............................................... 25

SOUND FIELD PROGRAMS............................. 30

Sound field program descriptions............................ 31

RECORDING ....................................................... 34

FM/AM TUNING ................................................. 35

Automatic tuning ..................................................... 35

Manual tuning.......................................................... 36

Automatic preset tuning........................................... 37

Manual preset tuning ............................................... 38

Selecting preset stations........................................... 39

Exchanging preset stations ...................................... 40

XM® SATELLITE RADIO TUNING ............... 41

What is XM Satellite Radio? ................................... 41

Connecting the XM Connect-and-Play

digital antenna ..................................................... 41

XM Satellite Radio controls and functions.............. 42

Activating XM Satellite Radio ................................ 43

Basic XM Satellite Radio operations....................... 44

Selecting the XM Satellite Radio search mode ....... 45

Setting XM Satellite Radio preset channels ............ 49

Displaying the XM Satellite Radio information...... 50

SET MENU ............................................................52

Using SET MENU................................................... 53

SOUND MENU....................................................... 53

INPUT MENU......................................................... 55

OPTION MENU...................................................... 56

REMOTE CONTROL FEATURES ...................57

Controlling this unit, a TV, or other components.... 57

Setting remote control codes ................................... 59

TROUBLESHOOTING .......................................60

RESETTING THE SYSTEM...............................65

GLOSSARY...........................................................66

Audio information ................................................... 66

Sound field program information ............................ 67

Video information.................................................... 67

SPECIFICATIONS...............................................68

CONTENTS

INTRODUCTION

PREPARATION

BASIC OPERATION

ADVANCED OPERATION

ADDITIONAL INFORMATION

FEATURES

Built-in 5-channel power amplifier

◆ Minimum RMS output power

[U.S.A. and Canada models]

(0.9% THD, 1 kHz, 8 Ω/6 Ω)

Front: 110 W + 110 W

Center: 110 W

Surround: 110 W + 110 W

[Other models]

(0.9% THD, 1 kHz, 6 Ω)

Front: 100 W + 100 W

Center: 100 W

Surround: 100 W + 100 W

Decoders and DSP circuits

◆ Proprietary YAMAHA technology for the creation of

multi-channel surround sound

◆ Dolby Digital decoder

◆ Dolby Pro Logic/Dolby Pro Logic II decoder

◆ DTS decoder

◆ Virtual CINEMA DSP

◆ SILENT CINEMA

™

Sophisticated AM/FM tuner

◆ 40-station random and direct preset tuning

◆ Automatic preset tuning

◆ Preset station shifting capability (preset editing)

XM Satellite Radio (U.S.A. model only)

◆ XM Satellite Radio tuning capability (Using the “XM

Connect-and-Play digital antenna” sold separately)

Other features

◆ 192-kHz/24-bit D/A converter

◆ 6 additional input jacks for discrete multi-channel input

◆ A SET MENU that allows you to optimize this unit to

suit your individual audiovisual system

◆ Component video input/output capability

(3 COMPONENT VIDEO INs and 1 MONITOR

OUT)

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Night listening mode

◆ Remote control with preset remote control codes

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the front panel or the ones on the remote control. In case the button

names differ between the front panel and the remote control, the button name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In

case of differences between the manual and product, the product has priority.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks

of Dolby Laboratories.

“SILENT CINEMA” is a trademark of YAMAHA

CORPORATION.

“DTS” and “DTS Digital Surround” are registered trademarks of

Digital Theater Systems, Inc.

The XM name and related logos are registered trademarks of XM

Satellite Radio Inc.

FEATURES

GETTING STARTED

INTRODUCTION

Check that you received all of the following parts.

1 Press the part and slide the battery

compartment cover off.

2 Insert the two supplied batteries (AA, R06,

UM-3) according to the polarity markings

(+ and –) on the inside of the battery

compartment.

3 Slide the cover back until it snaps into place.

• Change all of the batteries if you notice a decrease in the

operation range of the remote control.

• Do not use an old battery together with a new one.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment thoroughly before

installing new batteries.

• Do not throw away batteries with general house waste; dispose

of them correctly in accordance with your local regulations.

• If the remote control is without batteries for more than

2 minutes, or if exhausted batteries remain in the remote

control, the contents of the memory may be cleared. When the

memory is cleared, insert new batteries, set up the remote

control code and program any acquired functions that may have

been cleared.

GETTING STARTED

Supplied accessories

Installing batteries in the remote control

POWER

STANDBY

POWER

ENT.

+10

STRAIGHT

NIGHT

SPEAKERS

8765

5CH STEREOSTANDARD

432

MOVIEENTERTAINMUSIC

2CH STEREO

V-AU XVCRDTV/CBLDVD

SLEEP

TUNERMD/CD-RCD

AMP

CODE SET

MUTE

INPUTMUTE

REC

MULTI CH IN

AUDIO

DISC SKIP

VOLUME

–

CHVOL

SET MENU

ENTER

PRESET/CH

SRCH MODEBAND

LEVEL

TEST

MEMORY

A-E/CAT.

RETURN

DISPLAY

TITLE

–

Remote control

Batteries (2)

(AA, R06, UM-3)

Indoor FM antenna

(U.S.A., Canada, China, Asia

and General models)

AM loop antenna

Indoor FM antenna

(U.K., Europe, Australia

and Korea models)

Notes

CONTROLS AND FUNCTIONS

The XM Satellite Radio controlling functions in the following buttons (SEARCH MODE, XM, CATEGORY, PRESET/TUNING/CH

l / h, MEMORY, and DISPLAY) are only applicable to the U.S.A. model and are operational only when “XM” is selected as the

input source. For details, see “XM Satellite Radio controls and functions” on page 42.

1 STANDBY/ON

Turns on this unit or sets it to the standby mode.

• In the standby mode, this unit consumes a small amount of

power in order to receive infrared-signals from the remote

control.

• When you turn on this unit, there will be a 4 to 5-second delay

before this unit can reproduce sound.

2 Remote control sensor

Receives signals from the remote control.

3 PRESET/TUNING

• Switches the function of PRESET/TUNING/CH

between selecting preset station numbers and selecting

the tuning frequency.

• Edits the assignments of present stations.

4 FM/AM

Switches the reception band between FM and AM.

5 A/B/C/D/E

Selects one of the 5 preset station groups (A to E) when

“FM” or “AM” is selected as the input source.

6 PRESET/TUNING/CH l / h

• Selects one of the 8 preset station numbers (1 to 8)

when “FM” or “AM” is selected as the input source.

The colon (:) is displayed in the front panel display.

• Selects the tuning frequency when “FM” or “AM” is

selected as the input source. The colon (:) is not

displayed in the front panel display.

7 Front panel display

Shows information about the operational status of this unit.

8 MEMORY

Stores a preset station in the memory. Hold down this

button for more than 3 seconds to start automatic preset

tuning.

9 TUNING MODE

Switches between automatic tuning (the AUTO indicator

is turned on) and manual tuning (the AUTO indicator is

turned off).

0 VOLUME

Controls the output level of all audio channels.

This does not affect the AUDIO OUT (REC) level.

CONTROLS AND FUNCTIONS

Front panel

Note

PRESET/TUNING/CH

VOLU ME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

l PROGRAM h

EDIT

INPUT MODE

l INPUT h

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

ABCD FEGHI

234 5 678 9 0

(U.S.A. model)

Notes

Note

CONTROLS AND FUNCTIONS

INTRODUCTION

A PHONES jack

Outputs audio signals for private listening with

headphones.

• When you connect headphones, no signals are output at the

SUBWOOFER OUTPUT jack or at the SPEAKERS terminals.

• All Dolby Digital and DTS audio signals are mixed down to the

left and right headphone channels.

B SPEAKERS

Turns on or off the set of front speakers connected to the A

and/or B terminals on the rear panel.

C STRAIGHT

Turns the sound field programs off or on. When this unit is

in the “STRAIGHT” mode, 2-channel or multi-channel

input signals are output directly from their respective

speakers without effect processing.

D TONE CONTROL

Adjusts the bass/treble balance of the front left and right

speakers in conjunction with BASS/TREBLE +/–.

E BASS/TREBLE +/–

Adjusts the bass/treble balance of the front left and right

speakers in conjunction with TONE CONTROL.

F PROGRAM l / h

Selects sound field programs.

G INPUT MODE

Selects either digital or analog input signals exclusively or

sets this unit to automatically detect the type of input

signals and select the corresponding input signals when

one component is connected via both digital and analog

connections.

H INPUT l / h

Selects the desired input source.

I MULTI CH INPUT

Selects the component connected to the MULTI CH

INPUT jacks as the input source.

The input source connected to the MULTI CH INPUT jacks takes

priority over the source selected with INPUT l / h on the front

panel (or the input selector buttons on the remote control).

Notes

Note

CONTROLS AND FUNCTIONS

This section describes the function of each control on the

remote control used to control this unit. To operate other

components, see “REMOTE CONTROL FEATURES” on

page 57.

The XM Satellite Radio controlling functions in the following

buttons (BAND, MEMORY, SRCH MODE, DISPLAY, cursor

buttons u / d / j / i, numeric buttons and ENT.) are only

applicable to the U.S.A. model and are operational only when

“XM” is selected as the input source. For details, see “XM

Satellite Radio controls and functions” on page 42.

■ Controlling this unit

Press AMP to control this unit.

1 Infrared signal transmitter

Outputs infrared control signals. Aim the transmitter at the

component you want to operate.

2 Input selector buttons

Select the input source you want to control.

3 Sound field program selector buttons

Select sound field programs.

4 SPEAKERS A/B

Turn on or off the set of front speakers connected to the A

and/or B terminals on the rear panel.

5 LEVEL

Selects the speaker channel to be adjusted.

6 Cursor buttons u / d / j / i

Select and adjust sound field program parameters or SET

MENU items.

7 TEST

Outputs the test tone to adjust the speaker levels.

8 STANDBY

Sets this unit to the standby mode.

9 POWER

Turns on this unit.

0 SLEEP

Sets the sleep timer.

A MULTI CH IN

Selects the component connected to the MULTI CH

INPUT jacks as the input source when using an external

decoder, etc.

B CODE SET

Use to set up remote control codes.

C AMP

Sets the remote control to the operation mode of this unit.

D VOLUME +/–

Controls the output level of all audio channels.

This does not affect the AUDIO OUT (REC) level.

Remote control

Note

POWER

STANDBY

POWER

ENT.

+10

STRAIGHT

NIGHT

SPEAKERS

8765

5CH STEREOSTANDARD

432

MOVIEENTERTAINMUSIC

2CH STEREO

V-AUXVCRDTV/CBLDVD

SLEEP

TUNERMD/CD-RCD

AMP

CODE SET

MUTE

INPUTMUTE

REC

MULTI CH IN

AUDIO

DISC SKIP

VOLUME

–

CHVOL

SET MENU

ENTER

PRESET/CH

SRCH MODEBAND

LEVEL

TEST

MEMORY

A-E/CAT.

RETURN

DISPLAY

TITLE

–

(U.S.A. model)

Note

CONTROLS AND FUNCTIONS

INTRODUCTION

E MUTE

Mutes the audio output. Press again to restore the audio

output to the previous volume level.

F STRAIGHT

Turns the sound field programs off or on. When this unit is

in the “STRAIGHT” mode, 2-channel or multi-channel

input signals are output directly from their respective

speakers without effect processing.

G NIGHT

Turns on or off the night listening mode.

H SET MENU

Enters “SET MENU”.

■ Controlling the TUNER functions

To control the TUNER function, press TUNER and then

BAND repeatedly to select “FM” or “AM” as the input

source.

3 Numeric buttons

Select preset stations.

5 BAND

Switches the reception band between “FM” and “AM”.

6 A-E/CAT. j / i, PRESET/CH u / d

Press A-E/CAT. j / i to select a preset station group (A to

E) and PRESET/CH u / d to select a preset station

number (1 to 8).

■ Using the remote control

The remote control transmits a directional infrared ray.

Be sure to aim the remote control directly at the remote

control sensor on this unit during operation.

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following types

of conditions:

– places of high humidity, such as near a bath

– places of high temperature, such as near a heater or stove

– places of extremely low temperatures

– dusty places

Notes

30º 30º

Approximately 6 m (20 ft)

CONTROLS AND FUNCTIONS

The XM indicator is only applicable to the U.S.A. model and lights up only when “XM” is selected as the input source. For details, see

“Basic XM Satellite Radio operations” on page 44.

1 Decoder indicators

The respective indicator lights up when any of the

decoders of this unit function.

2 VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active.

3 SILENT CINEMA indicator

Lights up when headphones are connected and a sound

field program is selected.

4 Input source indicators

A corresponding cursor lights up to show the currently

selected input source.

5 MEMORY indicator

Flashes to show that a station can be stored.

6 MUTE indicator

Flashes while the MUTE function is on.

7 VOLUME level indicator

Indicates the current volume level.

8 PCM indicator

Lights up when this unit is reproducing PCM (Pulse Code

Modulation) digital audio signals.

9 STANDARD indicator

Lights up when the “STANDARD” program is selected.

0 NIGHT indicator

Lights up when you select a night listening mode.

A Speaker indicators

Light up according to the set of front speakers selected.

B Headphones indicator

Lights up when headphones are connected.

C CINEMA DSP indicator

Lights up when you select a CINEMA DSP program.

D HiFi DSP indicator

Lights up when you select a HiFi DSP program.

E Multi-information display

Shows the name of the current program and other

information when adjusting or changing settings.

F AUTO indicator

Lights up when this unit is in the automatic tuning mode.

G TUNED indicator

Lights up when this unit is tuned into a station.

H STEREO indicator

Lights up when this unit is receiving a strong signal for an

FM stereo broadcast while the AUTO indicator is lit.

I SLEEP indicator

Lights up while the sleep timer is on.

J Input channel indicators

Indicate the channel components of the current digital

input signal.

K XM indicator

Lights up when “XM” is selected as the input source.

Front panel display

Note

VIRTUAL

SILENT CINEMA

STANDARD NIGHT

HiFi DSP

AUTO

TUNED

STEREO

MEMORY

MUTE

VOLUME

SLEEP

LFE SL SR

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER CD

DIGITAL

PCM

890ACBD

FGH I J

312 4 5 76

(U.S.A. model only)

CONTROLS AND FUNCTIONS

INTRODUCTION

1 XM jack (U.S.A. model only)

See page 41 for connection information.

2 MULTI CH INPUT jacks

See page 16 for connection information.

3 Video component jacks

See page 14 for connection information.

4 COMPONENT VIDEO jacks

See page 16 for connection information.

5 Antenna terminals

See page 18 for connection information.

6 DIGITAL INPUT jacks

See pages 14 and 15 for connection information.

7 Audio component jacks

See page 17 for connection information.

8 SUBWOOFER OUTPUT jack

See page 12 for connection information.

9 SPEAKERS terminals

See page 11 for connection information.

0 IMPEDANCE SELECTOR

(U.S.A. and Canada models only)

See page 11 for details.

VOLTAGE SELECTOR

(Asia and General models only)

See page 19 for details.

Rear panel

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

MD/

CD-R

(PLAY)

(REC)

OUT

DIGITAL

INPUT

DVD

COAXIAL

DTV/CBL

OPTICAL

DVD

AUDIO

DVD

DTV/

CBL

OUT

VCR

V-AUX

VIDEO

OUTPUT

SUB

WOOFER

MONITOR

OUT

DTV/

CBL

COMPONENT VIDEO

PBYPR

MONITOR OUT

SURROUND

ANT

GND

ANT

TUNER

SPEAKERS

CLASS 2 WIRING

FRONT

CENTER

FRON

IMPEDANCE SELECTOR

12 3 4 5

67 8 9 0

(U.S.A. model)

CONNECTIONS

The speaker layout below shows the standard ITU-R

speaker setting. You can use it to enjoy CINEMA DSP and

multi-channel audio sources.

ITU-R is the radio communication sector of the ITU

(International Telecommunication Union).

■ Front speakers (FL and FR)

The front speakers are used for the main source sound plus

effect sounds. Place these speakers an equal distance from

the ideal listening position. The distance of each speaker

from each side of the video monitor should be the same.

■ Center speaker (C)

The center speaker is for the center channel sounds

(dialog, vocals, etc.). If for some reason it is not practical

to use a center speaker, you can do without it. Best results,

however, are obtained with the full system. Place the

center speaker centrally between the front speakers and as

close to the monitor as possible, such as directly over or

under it.

■ Surround speakers (SL and SR)

The surround speakers are used for effect and surround

sounds. Place these speakers behind your listening

position, facing slightly inwards, about 1.8 m (6 ft) above

the floor.

■ Subwoofer (SW)

The use of a subwoofer, such as the YAMAHA Active

Servo Processing Subwoofer System, is effective not only

for reinforcing bass frequencies from any or all channels,

but also for high fidelity reproduction of the LFE (low-

frequency effect) channel included in Dolby Digital and

DTS software. The position of the subwoofer is not so

critical, because low bass sounds are not highly

directional. But it is better to place the subwoofer near the

front speakers. Turn it slightly toward the center of the

room to reduce wall reflections.

CONNECTIONS

Placing speakers

60˚

30˚

80˚

1.8 m (6 ft)

CONNECTIONS

PREPARATION

Be sure to connect the left channel (L), right channel (R),

“+” (red) and “–” (black) properly. If the connections are

faulty, no sound will be heard from the speakers, and if the

polarity of the speaker connections is incorrect, the sound

will be unnatural and lack bass.

• Use speakers with the specified impedance

shown on the rear panel of this unit.

• Before connecting the speakers, make sure

that this unit is turned off.

• Do not let the bare speaker wires touch each

other or do not let them touch any metal part

of this unit. This could damage this unit and/or

speakers.

• Use magnetically shielded speakers. If this

type of speakers still creates the interference

with the monitor, place the speakers away

from the monitor.

(U.S.A. and Canada models only)

If you are to use 6 ohm speakers, be sure to set

the IMPEDANCE SELECTOR switch on the rear

panel to the upper position using a straight slot

screwdriver.

■ Before connecting to the SPEAKERS

terminal

A speaker cord is actually a pair of insulated cables

running side by side. Cables are colored or shaped

differently, perhaps with a stripe, groove or ridges.

Connect the striped (grooved, etc.) cable to the “+” (red)

terminals of this unit and your speaker. Connect the plain

cable to the “–” (black) terminals.

Remove approximately 10 mm (3/8”) of insulation

from the end of each speaker cable and then

twist the bare wires of the cable together to

prevent short circuits.

■ Connecting to the FRONT A SPEAKERS

terminals

1 Loosen the knob.

2 Insert the bare end of the speaker wire into

the hole on the terminal.

3 Tighten the knob to secure the wire.

Connecting the banana plug

(except U.K., Europe, Korea and Asia models)

The banana plug is a single-pole electrical connector

widely used to terminate speaker cables.

First, tighten the knob and then insert the banana plug

connector into the end of the corresponding terminal.

■ Connecting to the FRONT B, CENTER,

and SURROUND SPEAKERS terminals

1 Press down the tab.

2 Insert the bare end of the speaker wire into

the hole on the terminal.

3 Release the tab to secure the wire.

Connecting speakers

CAUTION

Switch

position

Speaker Impedance level

Upper

FRONT A or B

CENTER

SURROUND

The impedance of each

speaker must be 6 Ω or

higher.

Lower

FRONT A or B

CENTER

SURROUND

The impedance of each

speaker must be 8 Ω or

higher.

10 mm (3/8”)

Red: positive (+)

Black: negative (–)

Banana plug

Red: positive (+)

Black: negative (–)

CONNECTIONS

■ FRONT terminals

Connect one or two speaker systems (1, 2) to these

terminals. If you use only one front speaker system,

connect it to the FRONT A terminals.

■ CENTER terminals

Connect a center speaker (3) to these terminals.

■ SURROUND terminals

Connect surround speakers (4, 5) to these terminals.

■ SUBWOOFER OUTPUT jack

Connect a subwoofer with built-in amplifier (6) (such as

the YAMAHA Active Servo Processing Subwoofer

System) to this jack.

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

MD/

CD-R

(PLAY)

(REC)

OUT

DIGITAL

INPUT

DVD

COAXIA

DTV-CBL

OPTICAL

DVD

AUDIO

DVD

DTV/

CBL

OUT

VCR

V-AUX

VIDEO

OUTPUT

SUB

WOOFER

MONITOR

OUT

DTV/

CBL

COMPONENT VIDEO

PBYPR

MONITOR OUT

SURROUND

ANT

GND

ANT

TUNER

SPEAKERS

CLASS 2 WIRING

FRONT

CENTER

FRON

IMPEDANCE SELECTOR

31 2

Subwoofer Center

speaker

Front speakers (A)

LeftRight

Surround speakers

Front speakers (B)

LeftRight

(U.S.A. model)

Speaker layout

CONNECTIONS

PREPARATION

■ Audio jacks

This unit has three types of audio jacks (analog audio,

digital audio coaxial, and digital audio optical).

Connection depends on the availability of audio jacks on

your other components.

AUDIO jacks

For conventional analog audio signals transmitted via left

and right analog audio cables. Connect red plugs to the

right jacks and white plugs to the left jacks.

DIGITAL AUDIO COAXIAL jacks

For digital audio signals transmitted via coaxial digital

audio cables.

DIGITAL AUDIO OPTICAL jacks

For digital audio signals transmitted via optical digital

audio cables.

• You can use the digital jacks to input PCM, Dolby Digital and

DTS bitstreams. When you connect components to both the

COAXIAL and OPTICAL jacks, priority is given to the signals

input at the COAXIAL jack. All digital input jacks are

compatible with 96-kHz sampling digital signals.

• This unit handles digital and analog signals independently. Thus

audio signals input at the analog jacks are output only at the

analog AUDIO OUT (REC) jacks.

• Pull out the cap from the optical jack before you connect the

fiber optic cable. Do not discard the cap. When you are not

using the optical jack, be sure to put the cap back in place. This

cap protects the jack from dust.

■ Video jacks

This unit has two types of video jacks (composite video,

and component video). Connection depends on the

availability of input jacks on your video monitor.

VIDEO jacks

For conventional composite video signals transmitted via

composite video cables.

COMPONENT VIDEO jacks

For component signals, separated into the luminance (Y)

and chrominance (P

B, PR) video signals transmitted on

separate wires of component video cables.

Information on jacks and cable plugs

VIDEO

COMPONENT VIDEO

Y PB PR

COAXIAL

DIGITAL AUDIO

AUDIO

OPTICAL

DIGITAL AUDIO

Left and right

analog audio

cable plugs

Optical

digital

audio cable

plug

Coaxial

digital audio

cable plug

Composite

video cable

plug

Component

video cable

plugs

Audio jacks and cable plugs Video jacks and cable plugs

(Red)(White) (Orange) (Yellow) (Green) (Blue) (Red)

Notes

Video signal flow for MONITOR OUT

Output

(MONITOR OUT)

Input

COMPONENT

VIDEO

CONNECTIONS

■ Connecting a video monitor

Connect the video input jack of your video monitor to the

MONITOR OUT jack.

■ Connecting a DVD player/cable TV/

satellite tuner

Connect the coaxial digital audio signal output jack of

your DVD player to the DIGITAL INPUT DVD

COAXIAL jack and connect the video signal output jack

of the component to the DVD VIDEO jack of this unit.

Connect the optical digital audio signal output jack of

your cable TV or satellite tuner to the DIGITAL INPUT

DTV/CBL jack and connect the video signal output jack

of the component to the DTV/CBL VIDEO jack of this

unit.

• Use the AUDIO jacks of this unit for a video component which

does not have optical digital output jack. To enjoy the surround

sound, use the sound field program selector buttons on the

remote control (see page 30).

• If your DVD player does not have a coaxial digital output jack

but has an optical cable, connect the jack to the DIGITAL

INPUT DVD OPTICAL.

• You can also connect a video monitor, DVD player, digital TV,

and cable TV to this unit using the COMPONENT VIDEO

connections (see page 16).

■ Connecting a DVD recorder/VCR

Connect the audio signal input jacks of your video

component to the VCR AUDIO OUT jacks of this unit.

Then connect the video signal input jack of the video

component to the VCR VIDEO OUT jack of this unit for

picture recording.

Connect the audio signal output jacks of your component to

the VCR AUDIO IN jacks of this unit. Then connect the

video signal output jack of the component to the VCR

VIDEO IN jack of this unit to play a source from your

recording component.

• Once you have connected a recording component to this unit,

keep the component turned on while using this unit. If the

power is turned off, this unit may distort the sound from other

components.

• Be sure to connect your video source components in the same

way you connect your video monitor to this unit. For example,

if you connect your video monitor to this unit using a VIDEO

connection, connect your video source components to this unit

using the VIDEO connections.

■ Connecting another video component

Connect the video signal output jack of your component to

the V-AUX VIDEO jack of this unit.

Connect the audio signal output jacks of the component to

the V-AUX AUDIO jacks of this unit.

Connecting video components

Notes

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

MD/

CD-R

(PLAY)

(REC)

OUT

DIGITAL

INPUT

DVD

COAXIA

DTV/CBL

OPTICAL

DVD

AUDIO

DVD

DTV/

CBL

OUT

VCR

V-AUX

VIDEO

OUTPUT

SUB

WOOFER

MONITOR

OUT

DTV/

CBL

COMPONEN

MONITOR OUT

SUR

L R

DVD player

Video monitor

Video in

Audio out

Video out

Audio

out

Audio

out

CONNECTIONS

PREPARATION

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

MD/

CD-R

(PLAY)

(REC)

OUT

DIGITAL

INPUT

DVD

COAXIA

DTV/CBL

OPTICAL

DVD

AUDIO

DVD

DTV/

CBL

OUT

VCR

V-AUX

VIDEO

OUTPUT

SUB

WOOFER

MONITOR

OUT

DTV/

CBL

COMPONEN

MONITOR OUT

SUR

L R

LR LR

Cable TV or

Satellite tuner

DVD recorder or

VCR

Audio

out

Audio inAudio out Video outVideo in

Video

out

Audio out

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

MD/

CD-R

(PLAY)

(REC)

OUT

DIGITAL

INPUT

DVD

COAXIA

DTV/CBL

OPTICAL

DVD

AUDIO

DVD

DTV/

CBL

OUT

VCR

V-AUX

VIDEO

OUTPUT

SUB

WOOFER

MONITOR

OUT

DTV/

CBL

COMPONEN

MONITOR OUT

SUR

L R

Another video

component

Audio

out

Video

out

CONNECTIONS

■ Connecting to the COMPONENT VIDEO jacks

You can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using

COMPONENT VIDEO connections.

Be sure to connect your video source components in the same way you connect your video monitor to this unit. For example, if you

connect your video monitor to this unit using a COMPONENT VIDEO connection, connect your video source components to this unit

using the COMPONENT VIDEO connection.

■ Connecting to the MULTI CH INPUT jacks

This unit is equipped with 6 additional input jacks (FRONT L/R, CENTER, SURROUND L/R and SUBWOOFER) for

discrete multi-channel input from a multi-format player, external decoder or sound processor. Connect the output jacks

on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right

output jacks to the left and right input jacks for the front and surround channels.

• When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 25), this unit automatically

turns off the digital sound field processor, and you cannot select sound field programs.

• This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that

you connect a 5.1-channel speaker system before using this feature.

• When headphones are used, signals are output only from the front left and right channels.

Note

Notes

VCR

DTV/

CBL

COMPONENT VIDEO

PBYPR

MONITOR OUT

SURROUND

Video monitor

DVD player

DVD recorder or

VCR

Video out

Video in

Cable TV or

satellite tuner

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

DIGITAL

INPUT

DVD

COAXIAL

AUDIO

DVD

DTV/

CBL

V-AUX

VID

Multi-format player or

external decoder

Surround outCenter out

Subwoofer out Front out

CONNECTIONS

PREPARATION

■ Connecting a CD player

Connect the output jacks of your CD player to the CD

jacks of this unit.

To make a digital connection to a CD player, select the

corresponding setting for DIGITAL INPUT jacks in “INPUT

ASSIGN” (see page 55).

■ Connecting a CD recorder/MD recorder

Connect the input jacks of your CD recorder or MD

recorder to the MD/CD-R OUT (REC) jacks.

Connect the output jacks of your CD recorder or MD

recorder to the MD/CD-R IN (PLAY) jacks to play a

source from your recording component.

Once you have connected a recording component to this unit,

keep the component turned on while using this unit. If the

component is turned off, this unit may distort the sound from

other components.

Connecting audio components

Note

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

MD/

CD-R

(PLAY)

(REC)

OUT

DIGITAL

INPUT

DVD

COAXIA

DTV-CBL

OPTICAL

DVD

AUDIO

DVD

DTV/

CBL

OUT

VCR

V-AUX

OUTPUT

SUB

WOOFER

CD player

CD recorder or

MD recorder

Audio out

Audio in

CONNECTIONS

Both FM and AM indoor antennas are supplied with this

unit. In general, these antennas should provide sufficient

signal strength. Connect each antenna correctly to the

designated terminals.

• The AM loop antenna should be placed away from this unit.

• A properly installed outdoor antenna provides clearer reception

than an indoor one. If you experience poor reception quality,

install an outdoor antenna. Consult the nearest authorized

YAMAHA dealer or service center about outdoor antennas.

• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

■ Connecting the AM loop antenna

1 Set up the AM loop antenna.

2 Press down the tab of the AM ANT terminal.

3 Insert the one of the AM loop antenna lead

wires into the AM ANT terminal.

4 Release the tab back to secure the wire.

5 Repeat steps 2 through 4 to connect the

other lead wire to the GND terminal.

Once you have properly connected the AM loop

antenna to this unit, orient the AM loop antenna for

the best reception when you tune into AM stations.

Connecting the FM and AM antennas

Notes

ANT

GND

ANT

TUNER

AM loop

antenna

(supplied)

Ground

For maximum safety and minimum

interference, connect the antenna GND

terminal to a good earth ground. A good

earth ground is a metal stake driven into

moist earth.

Indoor FM

antenna

(supplied)

Outdoor AM antenna

Use a 5 to 10 m (16 to 32 ft) of

vinyl-covered wire extended

outdoors from a window.

CONNECTIONS

PREPARATION

Once all connections are complete, plug the power cable

into the AC wall outlet.

IMPEDANCE SELECTOR

(U.S.A. and Canada models only)

Before connecting the power cable into the AC wall outlet,

check that the impedance selector setting is correct.

VOLTAGE SELECTOR

(Asia and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit

must be set for your local voltage BEFORE plugging the

power cable into the AC wall outlet. Improper setting of

the VOLTAGE SELECTOR may cause damage to this

unit and create a potential fire hazard.

Select the switch position (upper or lower)

according to your local voltage using a straight

slot screwdriver.

Voltages are 110-120/220-240 V AC, 50/60 Hz.

When all connections are complete, turn on this unit.

Press STANDBY/ON on the front panel (or

POWER on the remote control) to turn on this

unit.

Press STANDBY/ON on the front panel again (or press

STANDBY on the remote control) to set this unit to the

standby mode.

Connecting the power cable

CAUTION

IMPEDANCE SELECTOR

(U.S.A. model)

Power cable

110V-120V

220V-240V

VOLTAGE

SELECTOR

Turning on the power

Memory back-up

The memory back-up circuit prevents the stored data

from being lost even if this unit is in the standby mode.

However, the stored data will be lost in case the power

cable is disconnected from the AC wall outlet or if the

power supply is cut off for more than one week.

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

l PROGRAM h

EDIT

INPUT MODE

l INPUT h

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

POWER

AMP

CODE SET

REC

MULTI CH IN

DISC SKIP

V-A UXVCRDTV/CBLDVD

SLEEPTUNERMD/CD-RCD

POWER

STANDBY

POWERPOWER

AVTV

AUDI O

+++

STANDBY/ON

POWER

STANDBY

/ON

POWER

Front panel

Remote control

SETUP

The “BASIC MENU” feature is a useful way to set up

your system quickly and with minimal effort.

• If you wish to configure this unit manually using more precise

adjustments, use the detailed parameters in “SOUND MENU”

(see page 53).

• Altering any parameters in “SETUP” resets all parameters

manually adjusted in “SOUND MENU” (see page 53).

• Initial settings are indicated in bold under each parameter.

Before you begin:

• Press SPEAKERS on the front panel repeatedly (or press

SPEAKERS A/B on the remote control) to select the front

speakers you want to use.

• Make sure you disconnect your headphones from this unit.

1 Press AMP and then SET MENU.

“BASIC MENU” appears in the front panel display.

If the front panel display shows anything other than

“BASIC MENU”, press SET MENU repeatedly until

“BASIC MENU” appears.

2 Press i to enter “BASIC MENU”.

“1 SETUP” appears in the front panel display.

3 Press i to enter “1 SETUP”.

“ROOM” appears in the front panel display.

4 Press j / i to select the desired setting.

Select the size of the room where you have installed

your speakers. In general, the room sizes are defined

as follows:

Choices: S, M, L

[U.S.A. and Canada models]

S (small) 16 x 13 ft, 200 ft

(4.8 x 4.0 m, 20 m

)

M (medium) 20 x 16 ft, 300 ft

(6.3 x 5.0 m, 30 m

)

L (large) 26 x 19 ft, 450 ft

(7.9 x 5.8 m, 45 m

)

[Other models]

S (small) 3.6 x 2.8 m, 10 m

M (medium) 4.8 x 4.0 m, 20 m

L (large) 6.3 x 5.0 m, 30 m

5 Press d to enter “SUBWOOFER” and then

press j / i to select the desired setting.

Choices: YES, NONE

• Select “YES” if you have a subwoofer in your

system.

• Select “NONE” if you do not have a subwoofer in

your system.

SETUP

Using BASIC MENU

Note

STRAIGHT

NIGHT

5CH STEREOSTANDARD

MOVIEENTERTAIN

AMP

INPUT

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

MUTE

SET MENU

PRESET/CH

SRCH MODEBAND

VOLUME

–

CHVOL

ENT.

+10

8765

432

MUTE

ENTER

RETURN

DISPLAY

TITLE

5-7,9,11,13-15

2-6,8,10,12,13

(U.S.A. model)

AMP

SET MENU

SRCH MODE

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

SETUP

PREPARATION

6 Press d to confirm your selection and then

press j / i to select the number of speakers

connected to this unit.

7 Press d to confirm your selection.

“iSET CANCEL” appears in front panel display.

8 Press j / i to select the desired setting.

Choices: SET, CANCEL

• Select “SET” to apply the settings you made.

• Select “CANCEL” to cancel the setup procedure

without making any changes.

You can also press SET MENU repeatedly to cancel the

setup procedure.

9 Press d to confirm your selection.

If you selected “SET” in the previous step, you will

hear a test tone from each speaker in turn.

“CHECK:TestTone” appears in the front panel

display for a few seconds and then “CHECK OK?”

appears in the front panel display.

The indicator of the speaker currently outputting the test

tone flashes in the front panel display.

10 Press j / i to select the desired setting.

Choices: YES, NO

• Select “YES” to complete the setup procedure if

the test tone levels from each speaker were

satisfactory.

• Select “NO” to proceed to the speaker level

adjustment menu to balance the output level of

each speaker.

11 Press d to confirm your selection.

• If you selected “YES” in the previous step, the

setup procedure is completed and the display

returns to the “BASIC MENU”.

• If you selected “NO” in the previous step, the

speaker level adjustment display appears in the

front panel display.

Choice Display Speakers

2spk

Front L/R

3spk

Front L/R, Center

4spk

Front L/R, Surround L/R

5spk

Front L/R, Center, Surround L/R

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

LL C R

SL SB SR

LL CR

SL SB SR

LL C R

SL SB SR

LL C R

SL SB

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

SETUP

12 Press j / i to adjust the balance between the

front left and right speakers.

13 Press d / u to select a speaker and then j / i

to adjust the balance.

Press i to increase the value.

Press j to decrease the value.

• Select “C” to adjust the balance between the front

left and center speakers.

• Select “SL” to adjust the balance between the front

left and surround left speakers.

• Select “SR” to adjust the balance between the

surround left and surround right speakers.

• Select “SWFR” to adjust the balance between the

front left speaker and the subwoofer.

14 To confirm the settings, press d / u

repeatedly until “2 SP LEVEL” appears in the

front panel display.

15 Press d repeatedly until the menu

disappears.

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

PLAYBACK

BASIC

OPERATION

Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD

encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may

damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the

sound output level of your CD player before you play back a CD encoded in DTS.

1 Turn on the video monitor connected to this

unit.

2 Press SPEAKERS on the front panel

repeatedly (or press AMP and then

SPEAKERS A/B on the remote control) to

select the front speakers you want to use.

The respective speaker indicators lights up in the

front panel display.

3 Press INPUT l / h on the front panel

repeatedly (or press one of the input selector

buttons on the remote control) to select the

desired input source.

The name of the currently selected input source

appears in the front panel display for a few seconds.

If you are to select an input source connected via digital

connections, set “INPUT MODE” to “AUTO” or “DTS”

(see page 26).

4 Start playback on the selected component or

select a broadcast station.

• When a multi-channel signal (Dolby Digital or

DTS) is input digitally, this unit decodes the signal

and reproduces surround sound.

• Refer to the operating instructions for the source

component.

• See page 35 for details about FM/AM tuning

instructions.

• See page 41 for details about XM Satellite Radio

tuning instructions.

PLAYBACK

CAUTION

Basic operations

STRAIGHT

NIGHT

AUDI O

VOLUME

–

CHVOL

ENT.

+10

8765

432

MUTE

5CH STEREOSTANDARD

MOVIEENTERTAIN

AMP

INPUT

LEVEL

SPEAKERS

2CH STEREO

MUSIC

CODE SET

MUTE

REC

MULTI CH IN

DISC SKIP

SET MENU

V-A UXVCRDTV/CBLDVD

SLEEPTUNERMD/CD-RCD

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

l PROGRAM h

EDIT

INPUT MODE

l INPUT h

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

2667 53

SPEAKERS

A/B/OFF

AMP

SPEAKERS

Remote controlFront panel

Note

Front panel

V-AUXVCRDTV/CBLDVD

MD/CD-RCD

NPU

Remote control

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER CD

DVD AUTO

Selected input source Input mode

Selected input source

PLAYBACK

5 Rotate VOLUME on the front panel (or press

VOLUME +/– on the remote control) to adjust

the volume to the desired output level.

If you connected a recording component to the VCR OUT,

or MD/CD-R OUT (REC) jacks, and you notice distortion

or low volume during playback from other components, try

turning on the recording component.

6 Press TONE CONTROL on the front panel

repeatedly to select “BASS” or “TREBLE”

and then press BASS/TREBLE +/– to adjust

the corresponding frequency response level.

• Select “BASS” to adjust the low-frequency

response.

• Select “TREBLE” to adjust the high-frequency

response.

• Speaker and headphone adjustments are stored

independently.

• When “TONE BYPASS” (see page 55) is set to “AUTO”,

and “BASS” and “TREBLE” are set to 0 dB, audio output

automatically bypasses the tone control circuitry of this

unit.

• If you increase or decrease the high-frequency or low-

frequency sound to an extreme level, the tonal quality of

the surround speakers may not match that of the front left

and right speakers.

• TONE CONTROL is not effective when the component

connected to the MULTI CH INPUT jacks is selected as

the input source (see page 25).

7 Press PROGRAM l / h on the front panel

repeatedly (or press one of the sound field

program selector buttons on the remote

control repeatedly) to select the desired

sound field program.

The name of the selected sound field program appears

in the front panel display.

See page 31 for details about sound field programs.

• Choose a sound field program based on your listening

preference, not merely on the name of the program.

• When you select an input source, this unit automatically

selects the last sound field program used with the

corresponding input source.

• Sound field programs cannot be selected when the

component connected to the MULTI CH INPUT jacks is

selected as the input source (see page 25).

• When sampling frequencies higher than 48 kHz are input,

this unit is automatically set to the “STEREO” mode.

• To display information about the currently selected input

source in the front panel display, see page 28 for details.

Note

Notes

VOLUME

–

TONE CONTROL

BASS/TREBLE

Notes

l PROGRAM h

STRAIGHT

NIGHT

ENT.

+10

8765

432

5CH STEREOSTANDARD

MOVIEENTERTAIN

SPEAKERS

2CH STEREO

MUSIC

Front panel

Remote control

The Roxy Thtr

Currently selected

surround field program

PLAYBACK

BASIC

OPERATION

■ Listening with headphones using

SILENT CINEMA

SILENT CINEMA allows you to enjoy multi-channel

music or movie sound, including Dolby Digital and DTS

sources, through ordinary headphones. SILENT CINEMA

activates automatically whenever you connect headphones

to the PHONES jack while listening to CINEMA DSP or

HiFi DSP sound field programs (see page 31). When

activated, the SILENT CINEMA indicator lights up in the

front panel display.

• SILENT CINEMA does not activate when the component

connected to the MULTI CH INPUT jacks is selected as the

input source.

• SILENT CINEMA is not effective when “2CH STEREO” (see

page 31) is selected or when this unit is in the “STRAIGHT”

mode (see page 33).

• The sound from the LFE channel will be mixed and output from

the headphones.

■ Muting the audio output

Press MUTE on the remote control to mute the

audio output.

Press MUTE again to resume the audio output.

• You can also rotate VOLUME on the front panel or VOLUME

+/– on the remote control to resume the audio output.

• You can adjust the muting level by using “AUDIO MUTE” in

“OPTION MENU” (see page 56).

• The MUTE indicator flashes in the front panel display when the

audio output is muted and disappears from the front panel

display when the audio output is resumed.

If you change the input source or the sound field program while

the audio output is being muted, this unit resumes the audio

output.

■ Selecting the MULTI CH INPUT

component as the input source

Use this feature to select the component connected to the

MULTI CH INPUT jacks (see page 16) as the input

source.

Press MULTI CH INPUT on the front panel (or

MULTI CH IN on the remote control) so that

“MULTI CH INPUT” appears in the front panel

display.

When “MULTI CH INPUT” is shown in the front panel display,

no other source can be played. To select another input source with

INPUT l / h on the front panel (or one of the input selector

buttons on the remote control), press MULTI CH INPUT (or

MULTI CH IN on the remote control) so that “MULTI CH

INPUT” disappears from the front panel display.

■ Using the night listening mode

The night listening mode is designed to improve

listenability at lower volumes or at night.

Press AMP on the remote control and then press

NIGHT to select “NIGHT ON”.

When a night listening mode is selected, the NIGHT indicator

lights up in the front panel display.

• You can use the night listening mode with any of the sound field

programs.

• The night listening mode may vary in effectiveness depending

on the input source and the surround sound settings you use.

Additional operations

Notes

Note

MUTE

Note

Notes

MULTI CH INPUT

MULTI CH IN

Front panel

Remote control

+10

NIGHT

AMP

PLAYBACK

■ Selecting the input modes

This unit comes with a variety of input jacks. Do the

following to select the type of input signals you want to

use.

• We recommend setting “INPUT MODE” to “AUTO” in most

cases.

• You can adjust the default input mode of this unit by using the

“INPUT MODE” parameter in “INPUT MENU” (see page 55).

• To play DTS-encoded CDs when using a digital audio

connection, be sure to set “INPUT MODE” to “DTS”.

• Depending on the player, DTS decoding may not be performed

correctly even if you make a digital connection between this

unit and the player.

1 Press INPUT l / h on the front panel to

select the desired input source.

2 Press INPUT MODE on the front panel

repeatedly to select the desired input mode.

AUTO Automatically selects input signals in

the following order:

1) Digital signals

2) Analog signals

DTS Selects only digital signals encoded in

DTS. If no DTS signals are input, no

sound is output.

ANALOG Selects only analog signals. If no

analog signals are input, no sound is

output.

When “INPUT MODE” is set to “AUTO”, this unit

automatically switches to the appropriate decoder if a Dolby

Digital or DTS signal is detected.

■ Adjusting speaker levels during

playback

You can adjust the output level of each speaker while

listening to a music source. This is also possible when

playing sources input at the MULTI CH INPUT jacks.

1 Press AMP on the remote control and then

press LEVEL repeatedly to select the speaker

you want to adjust.

• Select “FRONT L” to adjust the front left speaker

output level.

• Select “CENTER” to adjust the center speaker

output level.

• Select “FRONT R” to adjust the front right speaker

output level.

• Select “SUR. R” to adjust the surround right

speaker output level.

• Select “SUR. L” to adjust the surround left speaker

output level.

• Select “SWFR” to adjust the subwoofer output

level.

Once you press LEVEL on the remote control, you can also

select the speaker by pressing u / d.

2 Press j / i on the remote control to adjust the

speaker output level.

The control range is from +10 dB to –10 dB for the

center and surround speakers, and from 0 dB to

–20 dB for the front speakers and subwoofer.

• This operation will override the level adjustments made in

“SETUP” (see page 20).

• You cannot adjust speaker levels if “SPEAKER SET” in

“SOUND MENU” (see page 53) is set to “NONE”.

• You cannot adjust the subwoofer level if “BASS” in

“SPEAKER SET” (see page 53) in the set menu is set to

“FRNT”.

• If you use LEVEL to adjust speaker levels, the speaker levels

you previously set with the test tone will also change.

• If you select “SETUP” (see page 20) and then select “SET”,

speaker levels change in response to any changes you make in

“SETUP”.

Notes

Note

NPU

INPUT MODE

VCR

V-AUX

DTV/CBL

DVD

MD/CD-R

TUNER CD

DVD AUTO

Currently selected

input source

Currently selected

input mode

Currently selected

input sources

Notes

AMP

TITLE

LEVEL

BAND

ENTER

PRESET/CH

A-E/CAT.

–

PLAYBACK

BASIC

OPERATION

■ Using the test tone

Use the test tone to set speaker levels so that the volume

from each speaker is identical when heard from your

listening position. This is also possible when playing

sources input at the MULTI CH INPUT jacks.

1 Press AMP on the remote control and then

press TEST.

The unit will output a test tone.

2 Press u / d repeatedly to select a speaker to

adjust.

• Select “TEST LEFT” to adjust the front left

speaker output level.

• Select “TEST CENTER” to adjust the center

speaker output level.

• Select “TEST RIGHT” to adjust the front right

speaker output level.

• Select “TEST SUR.R” to adjust the surround right

speaker output level.

• Select “TEST SUR.L” to adjust the surround left

speaker output level.

• Select “TEST SUBWOOFER” to adjust the

subwoofer output level.

3 Press j / i on the remote control to adjust the

speaker output level.

The control range is from +10 dB to –10 dB for the

center and surround speakers, and from 0 dB to

–20 dB for the front speakers and subwoofer.

4 Press TEST on the remote control when you

have completed your adjustment.

The test tone halts.

• You cannot use the test tone if headphones are connected to the

PHONES jack. Remove the headphones from the PHONES

jack.

• This operation will override the level adjustments made in

“SETUP” (see page 20).

• You cannot adjust speaker levels if “SPEAKER SET” in

“SOUND MENU” (see page 53) is set to “NONE”.

• You cannot adjust the subwoofer level if “BASS” in

“SPEAKER SET” (see page 53) in the set menu is set to

“FRNT”.

• If you use TEST to adjust speaker levels, the speaker levels you

previously adjust during playback will also change.

• If you select “SETUP” (see page 20) and then select “SET”,

speaker levels change in response to any changes you make in

“SETUP”.

Depending on the source, the speaker levels set with the test tone

may not be to your liking. In this case, adjust the speaker levels

while listening to the source.

AMP

RETURN

TEST

MEMORY

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

RETURN

TEST

MEMORY

Notes

PLAYBACK

■ Displaying information about the input

source

You can display the format, sampling frequency, channel

and bit rate of the current input signal.

1 Press one of the input selector buttons on

the remote control to select the desired input

source.

2 Press AMP on the remote control and then

press STRAIGHT to select “STRAIGHT”.

3 Press u / d to display the following

information about the input source.

FORMAT

Signal format display. When this unit cannot detect a

digital signal, it automatically switches to analog

input.

Display status: Analog, Digital, Dolby Digital, DTS,

PCM, Unknown Digital

“Unknown Digital” appears when this unit detects any

undecodable digital signal.

CHANNEL

Number of source channels in the input signal (front/

surround/LFE). For example, a multi-channel

soundtrack with 3 front channels, 2 surround

channels and LFE, is displayed as “3/2/LFE”.

SAMPLING

Sampling frequency.

Display status: 32kHz, 44.1kHz, 48kHz, 64kHz,

88.2kHz, 96kHz

BITRATE

Bit rate.

When you are displaying information about the input source, this

unit is in the “STRAIGHT” mode (see page 33). To turn back the

sound field program on, press STRAIGHT again.

AMP

ENT.

STRAIGHT

ENTER

PRESET/CH

A-E/CAT.

–

Note

PLAYBACK

BASIC

OPERATION

■ Using the sleep timer

Use this feature to automatically set this unit to the

standby mode after a certain amount of time. The sleep

timer is useful when you are going to sleep while this unit

is playing or recording a source.

Press SLEEP on the remote control repeatedly to

set the amount of time.

Each time you press SLEEP, the front panel display

changes as shown below.

The SLEEP indicator flashes while you are switching the

amount of time for the sleep timer. Once the sleep timer is

set, the SLEEP indicator lights up in the front panel

display, and the display returns to the selected sound field

program.

To cancel the sleep timer, press SLEEP on the remote

control repeatedly until “SLEEP OFF” appears in the front

panel display.

The SLEEP indicator turns off and “SLEEP OFF”

disappears after a few seconds.

The sleep timer setting can also be canceled by pressing

STANDBY/ON on the front panel (or STANDBY on the remote

control) to set this unit to the standby mode.

■ Playing video sources in the

background

You can combine a video image from a video source with

sound from an audio source. For example, you can enjoy

listening to classical music while viewing beautiful

scenery from the video source on the video monitor.

Press the input selector buttons on the remote

control to select a video source and then an

audio source.

If you want to enjoy an audio source input at the MULTI CH

INPUT jacks together with a video source, first select the video

source and then press MULTI CH INPUT on the front panel (or

MULTI CH IN on the remote control) to select the component

connected to the MULTI CH INPUT jacks as the input source

(see page 25).

SLEEP

SLEEP 90min

SLEEP 60minSLEEP 30minSLEEP OFF

SLEEP 120min

SLEEP

SLEEP 120min

Flashes

SLEEP

The Roxy Thtr

Lights up

Note

Audio sources

Video sources

V-AUXVCRDTV/CBLDVD

TUNERMD/CD-RCD

SOUND FIELD PROGRAMS

This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from

almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field

processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.

• Choose a sound field program based on your listening preference, not merely on the name of the program.

• When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.

• Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input

source (see page 25).

• When sampling frequencies higher than 48 kHz are input, this unit is automatically set to the “STEREO” mode.

■ Front panel operations

Press PROGRAM l / h on the front panel

repeatedly.

The name of the selected sound field program appears in

the front panel display.

■ Remote control operations

Press AMP on the remote control and then press

one of the sound field program selector buttons

repeatedly.

The name of the selected sound field program appears in

the front panel display.

SOUND FIELD PROGRAMS

Notes

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

(U.S.A. model)

PROGRAM l / h

STRAIGHT

NIGHT

VOLUME

–

CHVOL

ENT.

+10

8765

432

MUTE

5CH STEREOSTANDARD

MOVIEENTERTAIN

AMP

INPUT

SPEAKERS

2CH STEREO

MUSIC

MUTE

(U.S.A. model)

AMP

Sound field program

selector buttons

SOUND FIELD PROGRAMS

BASIC

OPERATION

The sound field programs are compatible with all Dolby Digital, DTS, and Dolby Surround sources. Set “INPUT MODE” to “AUTO”

(see page 26) to enable this unit to automatically switch to the appropriate digital decoder according to the input signal.

• The sound field programs of this unit are recreations of real-world acoustic environments made from precise measurements taken in

the actual concert hall, music venue, movie theater, etc. Thus, you may notice variations in the strength of the reflections coming from

the front, back, left and right.

• Choose a sound field program based on your listening preference, not merely on the name of the program itself.

Sound field program descriptions

Remote

control

button

Program Features

2CH STEREO

Downmixes multi-channel sources to 2 channel or plays back 2-channel sources as they are.

MUSIC

Concert Hall

HiFi DSP processing. This program produces the excitement of a live concert hall.

The Roxy Thtr

HiFi DSP processing. The program reproduces the dynamic rock music environment of

“The Roxy Theatre”, one of the hottest rock clubs in L.A. The listener’s virtual seat is at the

center-left of the hall.

ENTERTAIN

Game

CINEMA DSP processing. This program adds the dynamics and thrills of the three-

dimensional surround sound effect.

TV Sports

CINEMA DSP processing. This program enhances the experience of watching sports by

producing the ambient sounds of the crowd and the stadium.

MOVIE

Movie Spacious

CINEMA DSP processing. This program offers clear dialog with a wide sound field for

movie scenes. It is ideal for any type of movie, live music and game contents.

Movie Dramatic

CINEMA DSP processing. This program creates a live sound field by emphasizing the

dramatic scene changes of action movies and games.

STANDARD

Standard processing for the selected decoder.

5CH STEREO

Using this program increases the listening position range. This is a sound field suitable for

background music at parties.

Notes

SOUND FIELD PROGRAMS

■ Enjoying 2-channel sources using the

standard decoders

Signals input from 2-channel sources can also be played

back on multi-channels.

Press AMP on the remote control and then

STANDARD on the remote control repeatedly to

select a decoder.

You can select from the following decoders depending on

the type of source you are playing and your personal

preference.

You can also select a decoder by pressing j / i on the remote

control while the decoder type is displayed in the front panel

display.

■ Editing sound fields parameters

You can enjoy good quality sound with the factory preset

parameters. Although you do not have to change the initial

settings, you can change some of the parameters to better

suit the input source or your listening room.

1 While listening to a source, press AMP on the

remote control and then press u / d to

select the parameters.

2 Press j / i to change parameter value.

You cannot change parameter values when “MEM. GUARD” in

“OPTION MENU” is set to “ON” (see page 56).

STANDARD Functions

PRO LOGIC

Dolby Pro Logic processing for any

sources

PLII Movie

Dolby Pro Logic II processing for

movie sources

PLII Music

Dolby Pro Logic II processing for

music sources

AMP

STANDARD

Note

ENTER

PRESET/CH

A-E/CAT.

–

ENTER

PRESET/CH

A-E/CAT.

–

SOUND FIELD PROGRAMS

BASIC

OPERATION

For 2CH STEREO:

Direct DIRECT

Function: 2-channel stereo direct. Bypasses the

decoders and DSP processors of this unit

for pure hi-fi stereo sound when playing

2-channel analog sources.

Choices: AUTO, OFF

• The “AUTO” setting bypasses the decoders and DSP processors

only when “BASS” and “TREBLE” are set to 0 dB (see

page 24).

• When multi-channel signals (Dolby Digital and DTS) are input,

they are downmixed to 2 channels and output from the front left

and right speakers.

• The low-frequency signals input from the front left and right

speakers are redirected to the subwoofer in the following cases:

– “BASS” is set to “BOTH” (see page 54).

– “FRONT” is set to “SML” (see page 54) and “BASS” is set to

“SWFR” (see page 54).

For PRO LOGIC II Music:

Panorama PANORAMA

Function: Sends stereo signals to the surround

speakers as well as the front speakers for

a wraparound effect.

Choices: OFF, ON

Dimension DIMENSION

Function: Gradually adjusts the sound field either

towards the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the

front), initial setting is STD (standard).

Center width CT WIDTH

Function: Adjusts the center image from all three

front speakers to varying degrees. A

larger value adjusts the center image

towards the front left and right speakers.

Control range: 0 (center channel sound is output only

from center speaker) to 7 (center channel

sound is output only from front left and

right speakers), initial setting is 3.

■ Using Virtual CINEMA DSP

Virtual CINEMA DSP allows you to enjoy the CINEMA

DSP programs without surround speakers by creating

virtual speakers.

If you set “SURR”

to “NONE” (see page 54), Virtual

CINEMA DSP activates automatically whenever you

select a CINEMA DSP program (see page 31).

Virtual CINEMA DSP will not activate even when “SURR” is set

to “NONE” (see page 54) in the following cases:

– When “2CH STEREO” (see page 31) is selected or when this

unit is in the “STRAIGHT” mode.

– When the component connected to the MULTI CH INPUT

jacks is selected as the input source (see page 25).

– When headphones are connected to the PHONES jack.

■ Listening to unprocessed input signals

When this unit is in the “STRAIGHT” mode, multi-

channel sources are decoded straight into the appropriate

channels without any additional effect processing. 2-

channel stereo sources are output from only the front left

and right speakers.

1 Press AMP on the remote control and then

STRAIGHT to select “STRAIGHT”.

2 To deactivate the “STRAIGHT” mode, press

STRAIGHT on the remote control again so

that “STRAIGHT” disappears from the front

panel display.

The sound field program is turned back on.

You can also select “STRAIGHT” by pressing STRAIGHT

on the front panel.

Note

ENT.

STRAIGHT

AMP

RECORDING

Recording adjustments and other operations are performed from the recording components. Refer to the operating

instructions for those components.

• When this unit is set to the standby mode, you cannot record between other components connected to this unit.

• The settings of TONE CONTROL (see page 24), VOLUME, speaker levels (see page 26) and the sound field programs (see page 31)

do not affect recorded material.

• The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.

• Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Therefore, if

your source component is connected to provide only digital signals, you cannot record the source.

• A given input source is not output on the same OUT (REC) channel.

• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright

laws.

• The XM Satellite Radio signals cannot be output at the AUDIO OUT (REC) jacks.

Do a test recording before you start an actual recording.

1 Turn on all the connected components.

2 Press INPUT l / h on the front panel

repeatedly (or press one of the input selector

buttons on the remote control) to select the

source component you want to record from.

3 Start playback on the selected source

component or select a broadcast station.

4 Start recording on the recording component.

RECORDING

Notes

If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture

itself may be disturbed due to those signals.

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

POWER

TV AVTV

AUDIO

REC

MULTI CH IN

V-A UXVCRDTV/CBLDVD

SLEEPTUNERMD/CD-RCD

POWER

STANDBY

POWERPOWER

(U.S.A. model)

NPU

V-AUXVCRDTV/CBLDVD

MD/CD-RCD

Front panel Remote control

FM/AM TUNING

BASIC

OPERATION

There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and

there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use

the automatic and manual preset tuning features to store up to 40 stations (A1 to E8: 8 preset station numbers in each of

the 5 preset station groups). Furthermore, you can recall any preset stations and exchange the assignment of two preset

stations with each other.

Automatic tuning is effective when station signals are

strong and there is no interference.

1 Press INPUT l / h repeatedly so that

“TUNER” is displayed in the front panel

display.

2 Press FM/AM to select the reception band

(FM or AM).

3 Press TUNING MODE so that the AUTO

indicator lights up in the front panel display.

If a colon (:) appears in the front panel display,

automatic tuning is not possible. Press PRESET/

TUNING to turn the colon (:) off.

4 Press PRESET/TUNING/CH l / h once to

begin automatic tuning.

When this unit is tuned into a station, the TUNED

indicator lights up and the frequency of the received

station is shown in the front panel display.

•Press h to tune into a higher frequency.

•Press l to tune into a lower frequency.

FM/AM TUNING

Automatic tuning

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

2413

(U.S.A. model)

NPU

FM/AM

AUTO/MAN'L

TUNING MODE

DISPLAY

AUTO

1440

kHz

Lights up

No colon (:)

PRESET/TUNING

EDIT

SEARCH MODE

AUTO

TUNED

1530

kHz

PRESET/TUNING/CH

SET MENU

Lights up

FM/AM TUNING

If the signal received from the station you want to select is

weak, tune into it manually.

Manually tuning into an FM station automatically switches the

tuner to monaural reception to increase the signal quality.

1 Press INPUT l / h repeatedly so that

“TUNER” is displayed in the front panel

display.

2 Press FM/AM to select the reception band

(FM or AM).

3 Press TUNING MODE so that the AUTO

indicator disappears from the front panel

display.

If a colon (:) appears in the front panel display,

manual tuning is not possible. Press PRESET/

TUNING to turn the colon (:) off.

4 Press PRESET/TUNING/CH l / h to tune

into the desired station manually.

•Press h to tune into a higher frequency.

•Press l to tune into a lower frequency.

• Hold down the button to continue searching.

Manual tuning

Note

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

2413

(U.S.A. model)

NPU

FM/AM

AUTO/MAN'L

TUNING MODE

DISPLAY

1440

kHz

No colon (:)

PRESET/TUNING

EDIT

SEARCH MODE

PRESET/TUNING/CH

SET MENU

FM/AM TUNING

BASIC

OPERATION

You can use the automatic preset tuning feature to store

FM stations with strong signals up to 40 (A1 to E8: 8

preset station numbers in each of the 5 preset station

groups) of those stations in order. You can then recall any

preset station easily by selecting the preset station number.

1 Press INPUT l / h repeatedly so that

“TUNER” is displayed in the front panel

display.

2 Press FM/AM to select “FM” as the reception

band.

3 Press and hold MEMORY for more than 3

seconds.

The preset station number as well as the MEMORY

and AUTO indicators flashes. After approximately 5

seconds, automatic presetting starts from the current

frequency and proceeds toward the higher

frequencies.

When automatic preset tuning is completed, the front

panel display shows the frequency of the last preset

station.

You can select the preset station group and the preset station

number where the first received station will be stored by pressing

A/B/C/D/E on the front panel and then PRESET/TUNING/CH

l / h.

• Any stored station data existing under a preset station number is

cleared when you store a new station under the same preset

station number.

• If the number of received stations does not reach 40 (E8),

automatic preset tuning automatically stops after searching for

all the available stations.

• Only FM stations with sufficient signal strength are stored

automatically by automatic preset tuning. If the station you

want to store is weak in signal strength, tune into it manually

and store it as described in “Manual preset tuning” on page 38.

Automatic preset tuning

(U.S.A. model)

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

213

NPU

FM/AM

Notes

MAN'L/AUTO FM

MEMORY

Flashes

Flash

AUTO

MEMORY

A1:FM 87.5 MHz

FM/AM TUNING

You can also store up to 40 stations (A1 to E8: 8 preset

station numbers in each of the 5 preset station groups)

manually.

1 Tune into a station automatically or manually.

See pages 35 and 36 for tuning instructions.

When this unit is tuned into a station, the front panel

display shows the frequency of the station received.

2 Press MEMORY.

The MEMORY indicator flashes in the front panel

display for approximately 5 seconds.

3 Press A/B/C/D/E repeatedly to select a preset

station group (A to E) while the MEMORY

indicator is flashing.

The preset station group letter appears. Check that the

colon (:) appears in the front panel display.

4 Press PRESET/TUNING/CH l / h to select a

preset station number (1 to 8) while the

MEMORY indicator is flashing.

•Press h to select a higher preset station number.

•Press l to select a lower preset station number.

5 Press MEMORY while the MEMORY indicator

is flashing.

The station band and frequency appear in the front

panel display with the preset station group and

number you have selected.

6 Repeat steps 1 through 5 to store other

stations.

• Any stored station data existing under a preset station

number is cleared when you store a new station under the

same preset station number.

• The reception mode (stereo or monaural) is stored along

with the station frequency.

Manual preset tuning

(U.S.A. model)

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

3 2,54

TUNED

630

kHz

MAN'L/AUTO FM

MEMORY

Flashes

A/B/C/D/E

CATEGORY

Preset station

group

Flashes

Colon (:)

TUNED

MEMORY

630

kHz

Notes

PRESET/TUNING/CH

SET MENU

TUNED

MEMORY

630

kHz

Preset station number

Flashes

The displayed station has been stored as C3.

MAN'L/AUTO FM

MEMORY

TUNED

630

kHz

FM/AM TUNING

BASIC

OPERATION

You can tune into any desired station simply by selecting

the preset station group and number under which it was

stored.

When performing this operation with the remote control, press

TUNER to select “FM” or “AM” as the input source.

1 Press A/B/C/D/E on the front panel (or A-E/

CAT. j / i on the remote control) repeatedly to

select the desired preset station group (A to

E).

The preset station group letter appears in the front

panel display and changes each time you press the

button.

2 Press PRESET/TUNING/CH l / h on the

front panel (or PRESET/CH u / d on the

remote control) to select the desired preset

station number (1 to 8).

The preset station group and number appear in the

front panel display along with the station band and

frequency.

You can select the desired preset station number (1 to 8) directly

by pressing the numeric buttons on the remote control.

Selecting preset stations

(U.S.A. model)

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

STRAIGHT

NIGHT

5CH STEREOSTANDARD

MOVIEENTERTAIN

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

SET MENU

PRESET/CH

SRCH MODEBAND

ENT.

+10

8765

432

ENTER

RETURN

DISPLAY

TITLE

A/B/C/D/E

CATEGORY

ENTER

PRESET/CH

A-E/CAT.

–

Front panel

Remote control

PRESET/TUNING/CH

SET MENU

87.5

MHz

ENTER

PRESET/CH

A-E/CAT.

–

Front panel

Remote control

FM/AM TUNING

You can exchange the assignments of two preset stations

with each other. The example below describes the

procedure to exchange preset station “E1” with “A5”.

1 Select preset station “E1” using A/B/C/D/E

and PRESET/TUNING/CH l / h.

See “Selecting preset stations” on page 39.

2 Press and hold PRESET/TUNING for more

than 3 seconds.

“E1” and the MEMORY indicator flash in the front

panel display.

3 Select preset station “A5” using A/B/C/D/E

and PRESET/TUNING/CH l / h.

“A5” and the MEMORY indicator flash in the front

panel display.

See “Selecting preset stations” on page 39.

4 Press PRESET/TUNING again.

“EDIT E1–A5” appears in the front panel display and

the assignments of the two preset stations are

exchanged.

Exchanging preset stations

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

2,4 3 3

(U.S.A. model)

PRESET/TUNING

EDIT

SEARCH MODE

MEMORY

87.5

MHz

Flashes

MEMORY

90.6

MHz

A/B/C/D/E

CATEGORY

PRESET/TUNING/CH

SET MENU

Flashes

EDIT E1-A5

PRESET/TUNING

EDIT

SEARCH MODE

XM® SATELLITE RADIO TUNING

BASIC

OPERATION

XM Satellite Radio is the satellite radio service with

millions of listeners across the United States, broadcasting

live daily. The XM Satellite Radio channel lineup includes

more than 150 digital channels of choice from coast to

coast: 67 commercial-free music channels, featuring hip

hop to opera, classical to country, bluegrass to blues; 33

channels of premier sports, talk, comedy, children’s and

entertainment programming; and more than 20 channels

of the traffic and weather information for major

metropolitan areas nationwide.

Because XM Satellite Radio is a subscription service, you

will need to set up an account and activate service with

XM using your XM Satellite Radio ID number. To check

your ID number, follow “Activating XM Satellite Radio”

on page 43. For further information on XM Satellite Radio

services, visit the XM Satellite Radio website at

“http://www.xmradio.com/”.

• The XM Satellite Radio service is only available in the 48

contiguous United States (not available in Alaska and Hawaii).

• XM Connect-and-Play digital antenna and monthly subscription

are sold separately. For details, visit the XM Satellite Radio

website at “http://www.xmradio.com/”.

■ Information from XM Satellite Radio Inc.

Hardware and required basic monthly subscription sold

separately. Premium Channel available at additional

monthly cost. Installation costs and other fees and taxes,

including a one-time activation fee may apply.

Subscription fee is consumer only. All fees and

programming subject to change. Channels with frequent

explicit language are indicated with an “XL”. Channel

blocking is available for XM radio receivers by calling

“1-800-XM-RADIO (1-800-967-2346)”. Subscriptions

subject to Customer Agreement available at xmradio.com.

trademarks are the property of their respective owners.

Connect the XM Connect-and-Play digital antenna

accessory (sold separately) to the XM jack on the rear

panel of this unit. For details, see the operating

instructions provided with the XM Connect-and-Play

digital antenna.

• For information on obtaining the XM Connect-and-Play digital

antenna, visit the XM Satellite Radio website at

“http://www.xmradio.com/” or consult your local retailer that

sells XM Ready products.

• To ensure the optimal reception of the XM Satellite Radio

signals, the XM Connect-and-Play digital antenna must be

placed at or near a southerly facing window with no obstacles in

the path to the sky. You can mount it indoors or outdoors.

SATELLITE RADIO TUNING

What is XM Satellite Radio?

Notes

Connecting the XM Connect-and-

Play digital antenna

Notes

MULTI CH INPUT

FRONT

CENTER

SUB

WOOFER

SURROUND

MD/

CD-R

(PLAY)

(REC)

OUT

DIGITAL

INPUT

COAXIAL

DTV/CBL

OPTICAL

DVD

AUDIO

XM Connect-and-Play

digital antenna

(U.S.A. model)

XM® SATELLITE RADIO TUNING

The following controls are available only when “XM” is selected as the input source. Press INPUT l / h on the front panel repeatedly

so that “TUNER” is displayed in the front panel display and then press XM on the front panel repeatedly (or press TUNER on the

remote control and then press BAND repeatedly) to select “XM” as the input source.

■ Front panel functions

1 SEARCH MODE (PRESET/TUNING)

Changes the search mode between the All Channel

Search, Category Search, and Preset Search modes

(see page 45).

2 XM (FM/AM)

Switches the reception band to XM.

3 CATEGORY (A/B/C/D/E)

(All Channel Search mode)

Changes the channel category while staying in the All

Channel Search mode.

(Category Search mode)

Changes the channel category.

(Preset Search mode)

Changes the preset channel group (A to E).

4 PRESET/TUNING/CH l / h

(All Channel Search mode)

Searches for a channel within all channels. Press and hold

for quick search.

(Category Search mode)

Searches for a channel within the selected category. Press

and hold for quick search.

(Preset Search mode)

Changes the preset channel number (1 to 8).

5 MEMORY

Stores a preset channel in the memory (see page 49).

6 DISPLAY (TUNING MODE)

Switches the XM information such as channel

number/name, category, artist name/song title in the front

panel display (see page 50).

■ Remote control functions

1 Numeric buttons

(All Channel Search or Category Search mode)

Use 1 to 9 and 0 to enter a channel number directly.

(Preset Search mode)

Use 1 to 8 to enter a preset channel number directly.

2 BAND

Switches the reception band to XM.

3 A-E/CAT. j / i, PRESET/CH u / d

(All Channel Search mode)

Press A-E/CAT. j / i to change the channel category.

Press PRESET/CH u / d to search for a channel within

all channels. Press and hold for quick search.

(Category Search mode)

Press A-E/CAT. j / i to change the channel category.

Press PRESET/CH u / d to search for a channel within

the selected category. Press and hold for quick search.

(Preset Search mode)

Press A-E/CAT. j / i to change the preset channel group

(A to E).

Press PRESET/CH u / d to change the preset channel

number (1 to 8).

4 MEMORY

Stores a preset channel in the memory (see page 49).

5 ENT.

Confirms an entered channel number in the Direct

Number Access mode (see page 48).

6 SRCH MODE

Changes the search mode between the All Channel

Search, Category Search, and Preset Search modes

(see page 45).

7 DISPLAY

Switches the XM information such as channel

number/name, category, artist name/song title in the front

panel display (see page 50).

XM Satellite Radio controls and functions

Note

PRESET/TUNING/CH

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

l PROGRAM h

EDIT

INPUT MODE

l INPUT h

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

12 3 4 5 6

(U.S.A. model)

STRAIGHT

NIGHT

ENT.

+10

8765

432

MUTE

ENTER

RETURN

DISPLAY

TITLE

5CH STEREOSTANDARD

MOVIEENTERTAIN

INPUT

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

MUTE

SET MENU

PRESET/CH

SRCH MODE

BAND

(U.S.A. model)

XM® SATELLITE RADIO TUNING

BASIC

OPERATION

To sign up for an account with the XM Satellite Radio

service, an XM Satellite Radio ID number is required.

Follow the procedure below to check your ID number, and

then visit the website at “http://activate.xmradio.com/” or

call “1-800-XM-RADIO (1-800-967-2346)” with a major

credit card handy for signing up.

1 Press INPUT l / h on the front panel

repeatedly so that “TUNER” is displayed in

the front panel display and then press XM on

the front panel repeatedly to select “XM” as

the input source.

2 Check the XM Satellite Radio reception level

and adjust the orientation of the XM Connect-

and-Play digital antenna for a better

percentage of the reception level.

You can display the XM Satellite Radio reception level by

using “XM ANT.” in “OPTION MENU” (see page 56).

• If “CHECK ANTENNA” appears in the front panel

display, the XM Connect-and-Play digital antenna may not

be connected to the XM jack on the rear panel of this unit

properly. See “Connecting the XM Connect-and-Play

digital antenna” on page 41 and check the connection.

• “XM ANT.” in “OPTION MENU” (see page 56) cannot

be adjusted by using the remote control. Instead, you need

to adjust the orientation of the XM Connect-and-Play

digital antenna connected to the XM jack of this unit for a

better percentage of the reception level.

3 Press PRESET/TUNING/CH l / h on the

front panel to select channel “0”.

You cannot select channel “0” if the All Channel Search

mode (see page 45) is not selected.

4 Check the XM Satellite Radio ID number

displayed in the front panel display and write

it down.

ID:_____________________________________

Activating XM Satellite Radio

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

131

(U.S.A. model)

NPU

FM/AM

Notes

Note

PRESET/TUNING/CH

SET MENU

XM® SATELLITE RADIO TUNING

1 Press INPUT l / h on the front panel

repeatedly so that “TUNER” is displayed in

the front panel display and then press XM on

the front panel repeatedly (or press TUNER

on the remote control and then press BAND

repeatedly) to select “XM” as the input

source.

The XM indicator lights up in the front panel display

and the XM Satellite Radio information (such as

channel number/name, category, artist name/song

title) for the currently selected channel appears in the

front panel display.

• When you select “XM” as the input source, this unit

automatically recalls the previously selected channel.

• You can change the kind of channel information by

pressing DISPLAY on the remote control repeatedly

(see page 50).

The XM Satellite Radio signals cannot be output at the

AUDIO OUT (REC) jacks.

2 Search for a channel by using one of the XM

Satellite Radio search modes.

See “Selecting the XM Satellite Radio search mode”

on page 45 for details.

3 Set XM Satellite Radio preset channels, if

desired.

See “Setting XM Satellite Radio preset channels” on

page 49 for details.

4 Display the XM Satellite Radio information in

the front panel display.

See “Displaying the XM Satellite Radio information”

on page 50 for details.

Basic XM Satellite Radio

operations

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

STRAIGHT

NIGHT

AUDI O

VOLUME

–

CHVOL

ENT.

+10

8765

432

MUTE

ENTER

RETURN

DISPLAY

TITLE

5CH STEREOSTANDARD

MOVIEENTERTAIN

AMP

INPUT

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

CODE SET

MUTE

REC

MULTI CH IN

DISC SKIP

SET MENU

PRESET/CH

SRCH MODEBAND

V-A UXVCRDTV/CBLDVD

SLEEPTUNERMD/CD-RCD

(U.S.A. model)

Note

NPU

TITLE

LEVEL

BAND

TUNER

FM/AM

Remote control

Front panel

XM® SATELLITE RADIO TUNING

BASIC

OPERATION

You can search for the desired channel using one of the

three search modes (All Channel Search, Category Search,

and Preset Search modes). You can also enter the channel

number directly to select the desired channel by using the

Direct Number Access mode (see page 48).

■ All Channel Search mode

1 Select “XM” as the input source.

See “Basic XM Satellite Radio operations” on

page 44 for details.

2 Press SEARCH MODE on the front panel (or

SRCH MODE on the remote control)

repeatedly to select “ALL CH SEARCH”.

3 Press CATEGORY on the front panel (or

A-E/CAT. j / i on the remote control)

repeatedly to change the channel category.

4 Press PRESET/TUNING/CH l / h on the

front panel (or PRESET/CH u / d on the

remote control) repeatedly to search for a

channel within all channels.

You can search for a channel quickly by pressing and

holding PRESET/TUNING/CH l / h on the front panel

(or PRESET/CH u / d on the remote control).

Selecting the XM Satellite Radio

search mode

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

342

(U.S.A. model)

STRAIGHT

NIGHT

ENT.

+10

8765

432

ENTER

RETURN

DISPLAY

TITLE

5CH STEREOSTANDARD

MOVIEENTERTAIN

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

SET MENU

PRESET/CH

SRCH MODE

BAND

(U.S.A. model)

PRESET/TUNING

EDIT

SEARCH MODE

SET MENU

SRCH MODE

Front panel Remote control

A/B/C/D/E

CATEGORY

ENTER

PRESET/CH

A-E/CAT.

–

Front panel Remote control

PRESET/TUNING/CH

SET MENU

Remote control

Front panel

ENTER

PRESET/CH

A-E/CAT.

–

XM® SATELLITE RADIO TUNING

■ Category Search mode

1 Select “XM” as the input source.

See “Basic XM Satellite Radio operations” on

page 44 for details.

2 Press SEARCH MODE on the front panel (or

SRCH MODE on the remote control)

repeatedly to select “CAT SEARCH”.

3 Press CATEGORY on the front panel (or

A-E/CAT. j / i on the remote control)

repeatedly to change the channel category.

4 Press PRESET/TUNING/CH l / h on the

front panel (or PRESET/CH u / d on the

remote control) repeatedly to search for a

channel within the selected channel

category.

You can search for a channel quickly by pressing and

holding PRESET/TUNING/CH l / h on the front panel

(or PRESET/CH u / d on the remote control).

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

342

(U.S.A. model)

STRAIGHT

NIGHT

ENT.

+10

8765

432

ENTER

RETURN

DISPLAY

TITLE

5CH STEREOSTANDARD

MOVIEENTERTAIN

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

SET MENU

PRESET/CH

SRCH MODE

BAND

(U.S.A. model)

PRESET/TUNING

EDIT

SEARCH MODE

SET MENU

SRCH MODE

Front panel Remote control

A/B/C/D/E

CATEGORY

ENTER

PRESET/CH

A-E/CAT.

–

Front panel

Remote control

PRESET/TUNING/CH

SET MENU

ENTER

PRESET/CH

A-E/CAT.

–

Remote control

Front panel

XM® SATELLITE RADIO TUNING

BASIC

OPERATION

■ Preset Search mode

Prior to selecting a preset channel in the Preset Search

mode, you must preset XM Satellite Radio channels. For

details, see “Setting XM Satellite Radio preset channels”

on page 49.

All preset channels (A1 to E8) recalls “001 Preview” by the initial

factory setting.

1 Select “XM” as the input source.

See “Basic XM Satellite Radio operations” on

page 44 for details.

2 Press SEARCH MODE on the front panel (or

SRCH MODE on the remote control)

repeatedly to select “PRESET SEARCH”.

3 Press CATEGORY on the front panel (or

A-E/CAT. j / i on the remote control)

repeatedly to change the preset channel

group (A to E).

4 Press PRESET/TUNING/CH l / h on the

front panel (or PRESET/CH u / d on the

remote control) repeatedly to change the

preset channel number (1 to 8).

You can also select the preset channel number directly by

pressing the numeric buttons (1 to 8) on the remote control.

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

342

(U.S.A. model)

STRAIGHT

NIGHT

ENT.

+10

8765

432

ENTER

RETURN

DISPLAY

TITLE

5CH STEREOSTANDARD

MOVIEENTERTAIN

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

SET MENU

PRESET/CH

SRCH MODE

BAND

(U.S.A. model)

PRESET/TUNING

EDIT

SEARCH MODE

SET MENU

SRCH MODE

Front panel Remote controlFront panel

A/B/C/D/E

CATEGORY

ENTER

PRESET/CH

A-E/CAT.

–

Front panel

Remote control

PRESET/TUNING/CH

SET MENU

ENTER

PRESET/CH

A-E/CAT.

–

Remote control

Front panel

XM® SATELLITE RADIO TUNING

■ Direct Number Access mode

1 Select “XM” as the input source.

See “Basic XM Satellite Radio operations” on

page 44 for details.

2 Press SRCH MODE on the remote control

repeatedly to select “ALL CH SEARCH” or

“CAT SEARCH”.

3 Press the numeric buttons on the remote

control to enter the desired three-digit

channel number.

For example, to enter the number 123, press the

numeric buttons as shown below.

The display changes as follows.

Press the numeric buttons and ENT. on the

remote control to enter the desired one-digit

or two-digit channel number.

For example, to enter the number 12, press the

numeric buttons as shown below.

• If no button is pressed within a few seconds after you enter

a one-digit or two-digit number, this unit automatically

confirms the entered channel number.

• Pressing a button other than the numeric buttons or ENT.

cancels the Direct Number Access mode procedure.

(U.S.A. model)

STRAIGHT

NIGHT

AUDI O

VOLUME

–

CHVOL

ENT.

+10

8765

432

MUTE

ENTER

RETURN

DISPLAY

TITLE

5CH STEREOSTANDARD

MOVIEENTERTAIN

AMP

INPUT

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

CODE SET

MUTE

REC

MULTI CH IN

DISC SKIP

SET MENU

PRESET/CH

SRCH MODEBAND

V-A UXVCRDTV/CBLDVD

SLEEPTUNERMD/CD-R

SET MENU

SRCH MODE

2CH STEREO

MUSIC

ENTERTAIN

<XM> -12

<XM>123

<XM> --1

2CH STEREO

MUSIC

STRAIGHT

ENT.

MUSIC

XM® SATELLITE RADIO TUNING

BASIC

OPERATION

You can use this feature to store up to 40 XM Satellite

Radio channels (A1 to E8: 8 preset channel numbers in

each of the 5 preset channel groups). You can then recall

any preset channel easily by selecting the preset channel

group and number as described in “Preset Search mode”

on page 47.

1 Search for a channel you want to set as a

preset channel by using one of the XM

Satellite Radio search modes.

See “Selecting the XM Satellite Radio search mode”

on page 45 for details.

2 Press MEMORY on the front panel (or

MEMORY on the remote control).

The MEMORY indicator flashes in the front panel

display for approximately 5 seconds.

You must proceed to and carry out steps 3 through 5 while

the MEMORY indicator is flashing in the front panel

display.

3 Press CATEGORY on the front panel (or

A-E/CAT. j / i on the remote control)

repeatedly to select a preset channel group

(A to E) while the MEMORY indicator is

flashing.

The preset channel group letter appears in the front

panel display.

Setting XM Satellite Radio preset

channels

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

2,54

(U.S.A. model)

STRAIGHT

NIGHT

ENT.

+10

8765

432

ENTER

RETURN

DISPLAY

TITLE

5CH STEREOSTANDARD

MOVIEENTERTAIN

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

SET MENU

PRESET/CH

SRCH MODE

BAND

2,5

(U.S.A. model)

[040] Deep Tra

Currently selected channel number

Note

MAN'L/AUTO FM

MEMORY

RETURN

TEST

MEMORY

Flashes

Front panel Remote control

MEMORY

C [040] Deep

Currently selected preset channel group

A/B/C/D/E

CATEGORY

ENTER

PRESET/CH

A-E/CAT.

–

Front panel

Remote control

Flashes

XM® SATELLITE RADIO TUNING

4 Press PRESET/TUNING/CH l / h on the

front panel (or PRESET/CH u / d on the

remote control) repeatedly to select a preset

channel number (1 to 8) while the MEMORY

indicator is flashing.

The preset channel number appears in the front panel

display.

5 Press MEMORY on the front panel (or

MEMORY on the remote control) to set the

selected XM Satellite Radio channel as a

preset channel while the MEMORY indicator

is flashing.

A colon (:) appears next to the preset channel number

for confirmation, and the MEMORY indicator turns

off in the front panel display.

Once you set a new preset channel, the one previously

stored in the same preset channel group and number is

cleared.

You can display the XM Satellite Radio information (such

as channel number/name, category, artist name/song title)

for the currently selected channel in the front panel

display.

If a status message or an error message appears in the front panel

display, see the “XM Satellite Radio (U.S.A. model only)”

section in “TROUBLESHOOTING” on page 63 for appropriate

remedies.

■ Displaying the XM Satellite Radio

information in the front panel display

Press DISPLAY on the front panel or on the

remote control repeatedly to toggle between the

following XM Satellite Radio information display

modes.

Note

MEMORY

C5 [040] Deep

Currently selected preset channel number

PRESET/TUNING/CH

SET MENU

ENTER

PRESET/CH

A-E/CAT.

–

Remote control

Front panel

Flashes

MAN'L/AUTO FM

MEMORY

RETURN

TEST

MEMORY

Front panel

Remote control

C5 [040] Deep :

Colon (:)

Displaying the XM Satellite Radio

information

Note

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

PROGRAM

EDIT

INPUT MODE

INPUT

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

(U.S.A. model)

ENTER

RETURN

DISPLAY

TITLE

LEVEL

TEST

MEMORY

–

A-E/CAT.

SET MENU

PRESET/CH

SRCH MODE

BAND

(U.S.A. model)

DISPLAY

AUTO/MAN'L

TUNING MODE

DISPLAY

Channel number/name

Channel category

Artist name/song title

Front panel

Remote control

XM® SATELLITE RADIO TUNING

BASIC

OPERATION

When the channel number/name is displayed:

When the channel category is displayed:

When the artist name/song title is displayed:

• The front panel display can indicate up to 14 alphanumeric

characters at once. You can set whether to display the XM

Satellite Radio information in the front panel display in a

continuous manner or by 14 alphanumeric characters at once by

using the “SCROLL” parameter in “OPTION MENU” (see

page 56).

• If the XM Satellite Radio information contains a character that

cannot be recognized by this unit, the character will be replaced

with a space.

If you press DISPLAY while the XM Satellite Radio information

display is scrolling from right to left in the front panel display, the

XM Satellite Radio information display mode toggles as

described above.

Note

[040] Deep Tra

<CAT>Rock

Coldplay / Clo

SET MENU

You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this

unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening

environment.

■ BASIC MENU

Use this feature to set up your system quickly and with minimal effort (see page 20).

■ SOUND MENU

Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system.

■ INPUT MENU

Use this menu to manually reassign the input jacks, select the input mode or rename the input source.

■ OPTION MENU

Use this menu to manually adjust the optional system parameters.

The “XM RADIO SET” parameter is only applicable to the U.S.A. model.

SET MENU

Parameter Features Page

1 SPEAKER SET

Selects the size of each speaker, the speakers for low-frequency signal output, and the

crossover frequency.

2 SP DISTANCE

Adjusts the delay time of each speaker.

3 LFE LEVEL

Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.

4 D. RANGE

Adjusts the dynamic range of Dolby Digital or DTS signals.

5 TC.BYPASS

Adjusts the tone bypass settings.

Parameter Features Page

1 INPUT ASSIGN

Assigns the input jacks of this unit according to the component to be used.

2 INPUT MODE

Selects the initial input mode of the source.

Parameter Features Page

1 DISPLAY SET

Adjusts the brightness of the display.

2 MEM. GUARD

Locks sound field program parameters and other “SET MENU” settings.

3 AUDIO MUTE

Adjusts the muting level.

4 XM RADIO SET

Displays the current reception level of the XM Connect-and-Play digital antenna.

Note

SET MENU

ADVANCED

OPERATION

Use the remote control to access and adjust each

parameter.

• You can change the “SET MENU” parameters while this unit is

reproducing sound.

• You can use NEXT (A/B/C/D/E) and SET MENU +/–

(PRESET/TUNING/CH l / h) on the front panel to change

these settings, if “TUNER” is not selected as the input source.

Press NEXT to select the category or field you wish to change,

and SET MENU +/– to change the parameters.

1 Press AMP.

2 Press SET MENU repeatedly to display the

desired menu and then press i to enter the

menu.

Once you press SET MENU, you can also select the menu

by pressing u / d.

3 Press u / d repeatedly to select the item and

then press j / i to change the parameter.

Depending on the menu item, press u / d to select a

sub item, and then press j / i to change the parameter.

4 To exit, press u / d repeatedly until the

menu disappears.

Use this menu to manually adjust any speaker settings.

• If you select “SETUP” (see page 20) and then select “SET”

after adjusting the “SOUND MENU” parameters, the “SETUP”

parameters override the “SOUND MENU” parameters. Do not

enter “SETUP” unless you wish to change the “SOUND

MENU” parameters. If you accidentally enter “SETUP”, select

“CANCEL” to exit from “SETUP”.

• Some menu item settings have no effect when the unit is

reproducing a source with a digital signal sampling frequency

greater than 48 kHz.

■ Speaker settings 1 SPEAKER SET

Use this feature to manually adjust any speaker setting.

If you are not satisfied with the bass sounds from your speakers,

you can change these settings according to your preference.

Center speaker 1A CENTER

Choices: LRG (large), SML (small), NON (none)

• Select “LRG” if you have a large center speaker. The

entire range of the center channel signals is directed to

the center speaker.

• Select “SML” if you have a small center speaker. The

low-frequency signals of the center channel are

directed to the speakers selected with “1D BASS”.

• Select “NON” if you do not have a center speaker. The

entire range of the center channel signals is directed to

the front left and right speakers.

Front speakers 1B FRONT

Choices: LRG (large), SML (small)

• Select “SML” if you have small front speakers. The

low-frequency signals of the front channel are directed

to the speakers selected with “1D BASS”.

• Select “LRG” if you have large front speakers. The

entire range of the front left and right channel signals is

directed to the front left and right speakers.

Using SET MENU

STRAIGHT

NIGHT

VOLUME

–

CHVOL

ENT.

+10

8765

432

MUTE

ENTER

RETURN

DISPLAY

TITLE

5CH STEREOSTANDARD

MOVIEENTERTAIN

AMP

INPUT

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

MUTE

SET MENU

PRESET/CH

SRCH MODE

BAND

SOUND MENU

Notes

SET MENU

Surround left/right speakers 1C SURR

Choices: LRG (large), SML (small), NON (none)

• Select “LRG” if you have large surround left and right

speakers. The entire range of the surround channel

signals is directed to the surround left and right

speakers.

• Select “SML” if you have small surround left and right

speakers. The low-frequency signals of the surround

channel are directed to the speakers selected with “1D

BASS”.

• Select “NON” if you do not have surround speakers.

This will set this unit to the Virtual CINEMA DSP

mode (see page 33).

Bass out 1D BASS

Use this feature to select the speakers that output the LFE

(low-frequency effect) and the low-frequency signals.

Choices: SWFR (subwoofer), FRNT (front), BOTH

• Select “SWFR” if you connected a subwoofer. The

LFE signals as well as the low-frequency signals of

other speakers set to “SML” or to “NON” are directed

to the subwoofer.

• Select “FRNT” if you did not connect a subwoofer.

The LFE signals, the low-frequency signals of the front

left and right channels, and the low-frequency signals

of other speakers set to “SML” or to “NON” are all

directed to the front left and right speakers regardless

of the “1B FRONT” setting.

• Select “BOTH” if you connected a subwoofer. The

low-frequency signals of any source are output from

the subwoofer. The LFE signals as well as the low-

frequency signals of other speakers set to “SML” or to

“NON” are directed to the subwoofer. The low-

frequency signals of the front left and right channels

are directed to the front left and right speakers and the

subwoofer regardless of the “1B FRONT” setting.

■ Speaker distance 2 SP DISTANCE

Use this feature to manually adjust the distance of each

speaker and the delay applied to the respective channel.

Ideally, each speaker should be the same distance from the

main listening position. However, this is not possible in

most home situations. Thus, a certain amount of delay

must be applied to the sound from each speaker so that all

sounds will arrive at the listening position at the same

time.

Unit UNIT

Choices: meters, feet

Initial setting:

[U.S.A. and Canada models]: feet

[Other models]: meters

• Select “meters” to adjust speaker distances in meters.

• Select “feet” to adjust speaker distances in feet.

Speaker distances

Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)

Control step: 0.10 m (0.5 ft)

Initial settings: 3.00 m (10.0 ft)

• Select “FRONT” to adjust the distance of the front

speaker.

• Select “CENTER” to adjust the distance of the center

speaker.

• Select “SURR” to adjust the distance of the surround

speaker.

• “CENTER” and “SURR” cannot be adjusted if “1A CENTER”

and “1C SURR” are set to “NON” respectively.

• No delay will be set if you set the same distance for “FRONT”,

“CENTER”, and “SURR”.

■ Low-frequency effect level 3 LFE LEVEL

Use this feature to adjust the output level of the LFE (low-

frequency effect) channel according to the capacity of

your subwoofer or headphones. The LFE channel carries

low-frequency special effects which are only added to

certain scenes. This setting is effective only when this unit

decodes Dolby Digital or DTS signals.

Control range: –20 to 0 dB

Control step: 1 dB

Speaker SP LFE

Adjusts the speaker LFE level.

Headphone HP LFE

Adjusts the headphone LFE level.

• Adjust the LFE level according to the capacity of your

subwoofer or headphones.

• Depending on the settings of “1D BASS”, some signals may not

be output at the SUBWOOFER OUTPUT jack.

Notes

SET MENU

ADVANCED

OPERATION

■ Dynamic range 4 D.RANGE

Use this feature to select the amount of dynamic range

compression to be applied to your speakers or

headphones. This setting is effective only when the unit is

decoding Dolby Digital and DTS signals.

Choices: MIN (minimum), STD (standard), MAX

(maximum)

Speaker SP D.R

Adjusts the speaker compression.

Headphone HP D.R

Adjusts the headphone compression.

• Select “MIN” if you regularly listen at low volume

levels.

• Select “STD” for general use.

• Select “MAX” to preserve the greatest amount of

dynamic range.

■ Tone bypass 5 TC.BYPASS

Use this feature to select whether audio output bypasses

tone control circuitry when “BASS” and “TREBLE” are

set to 0 dB (see page 24).

Choices: AUTO, OFF

• Select “AUTO” if you want signals to bypass tone

control circuitry to provide the purest signal possible.

• Select “OFF” if you do not want signals to bypass tone

control circuitry.

Use this menu to reassign input jacks or select the input

mode.

■ Input assignment 1 INPUT ASSIGN

Use this feature to assign the input jacks according to the

component to be used if the initial settings of this unit do

not correspond to your needs. Change the following

parameters to reassign the respective jacks and effectively

connect more components.

Once the input jacks are reassigned, you can select the

corresponding component by using INPUT l / h on the

front panel (or the input selector buttons on the remote

control).

For COMPONENT VIDEO jacks [A][B][C]

Choices: [A] DVD, DTV/CBL, VCR, V-AUX

[B] DVD, DTV/CBL, VCR, V-AUX

[C] DVD, DTV/CBL, VCR, V-AUX

For OPTICAL INPUT jacks 1 2

Choices: (1) DVD, DTV/CBL, CD, VCR, MD/CD-R,

V-AU X

(2) DVD, DTV/CBL, CD, VCR, MD/CD-R,

V-AU X

For COAXIAL INPUT jack 3

Choices: (3) DVD, DTV/CBL, CD, VCR, MD/CD-R,

V-AU X

• You cannot select a specific item more than once for the same

type of jack.

• When you connect a component to both the COAXIAL and

OPTICAL jacks, priority is given to the signals input at the

COAXIAL jack.

■ Input mode 2 INPUT MODE

Use this feature to designate the input mode for sources

connected to the DIGITAL INPUT jacks when you turn on

this unit (see page 26).

Choices: AUTO, LAST

• Select “AUTO” to allow this unit to automatically

detect the type of input signal and select the

appropriate input mode.

• Select “LAST” to set this unit to automatically select

the last input mode used for that source.

INPUT MENU

Note

SET MENU

Use this menu to adjust the optional system parameters.

■ Display settings 1 DISPLAY SET

Dimmer DIMMER

Use this feature to adjust the brightness of the front panel

display.

Choices: –

4 to 0

Control step: 1

• Press j to make the front panel display dimmer.

• Press i to make the front panel display brighter.

■ Memory guard 2 MEM. GUARD

Use this feature to prevent accidental changes to sound

field program parameter values and other system settings.

Choices: ON, OFF

• Select “OFF” to turn off the “MEM. GUARD” feature.

• Select “ON” to protect:

– Sound field program parameters

– All “MENU” items

– All speaker levels

When “MEM. GUARD” is set to “ON”, you cannot select and

adjust any other “SET MENU” items.

■ Audio mute 3 AUDIO MUTE

Use this feature to adjust how much the mute function

reduces the output volume.

Choices: MUTE, –50 dB, –20 dB

• Select “MUTE” to completely mute all the audio

output.

• Select “–50 dB” to reduce the current volume by

50 dB.

• Select “–20 dB” to reduce the current volume by

20 dB.

■ XM Radio setting 4 XM RADIO SET

XM Radio antenna XM ANT.

Use this feature to check the current reception level of the

XM Connect-and-Play digital antenna connected to the

XM jack of this unit (see page 41). For the best reception,

orient the XM Connect-and-Play digital antenna so that a

value of 60% or more is displayed here.

Display status: NONE, 0 to 100%

•

“

NONE” is displayed if the XM Connect-and-Play digital

antenna is not connected to this unit. In this case, check the

antenna connections (see page 41).

• The “XM ANTENNA” parameter cannot be adjusted by using

the remote control. Instead, you need to adjust the orientation of

the XM Connect-and-Play digital antenna connected to the XM

jack of this unit for a better percentage of the reception level.

XM Radio information display scroll SCROLL

Use this feature to set whether to scroll the XM Satellite

Radio information display in a continuous manner or by

14 alphanumeric characters at once (see page 50).

Choices: CONT, ONCE

• Select “CONT” to scroll the XM Satellite Radio

information display in a continuous manner.

• Select “ONCE” to scroll the XM Satellite Radio

information display by 14 alphanumeric characters at

once.

OPTION MENU

Note

Notes

REMOTE CONTROL FEATURES

ADVANCED

OPERATION

In addition to controlling this unit, the remote control can also operate other audiovisual components made by YAMAHA

and other manufacturers. To control other components, you must set up remote control with the appropriate remote

control codes (see page 59).

■ Controlling this unit

Press AMP to control this unit.

These buttons always control this unit.

These buttons control this unit only when AMP is pressed.

■ Controlling a TV

Press DTV/CBL to control your TV.

To control your TV, you must set the appropriate remote

control code for DTV/CBL.

These buttons always control your TV regardless of whether

you press DTV/CBL or not.

These buttons control your TV only when DTV/CBL is

pressed. For details, see the “Digital TV/Cable TV” column on

page 58.

REMOTE CONTROL FEATURES

Controlling this unit, a TV, or other components

Notes

POWER

STRAIGHT

NIGHT

AVTV

AUDI O

VOLUME

–

CHVOL

ENT.

+10

8765

432

MUTE

ENTER

RETURN

DISPLAY

TITLE

5CH STEREOSTANDARD

MOVIEENTERTAIN

AMP

INPUT

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

CODE SET

MUTE

REC

MULTI CH IN

DISC SKIP

SET MENU

PRESET/CH

SRCH MODEBAND

V-A UXVCRDTV/CBLDVD

SLEEPTUNERMD/CD-RCD

POWER

STANDBY

POWERPOWER

(U.S.A. model)

AMP

Notes

Remote control Digital TV/Cable TV

TV POWER Turns on or off the power.

TV VOL +/–

Increases or decreases the volume

level.

TV CH +/– Changes the channel number.

TV MUTE Mutes the audio output.

TV INPUT Changes the input source.

POWER

STRAIGHT

NIGHT

AVTV

AUDI O

VOLUME

–

CHVOL

ENT.

+10

8765

432

MUTE

ENTER

RETURN

DISPLAY

TITLE

5CH STEREOSTANDARD

MOVIEENTERTAIN

AMP

INPUT

LEVEL

TEST

SPEAKERS

MEMORY

2CH STEREO

–

A-E/CAT.

MUSIC

CODE SET

MUTE

REC

MULTI CH IN

DISC SKIP

SET MENU

PRESET/CH

SRCH MODEBAND

V-A UXVCRDTV/CBLDVD

SLEEPTUNERMD/CD-RCD

POWER

STANDBY

POWERPOWER

(U.S.A. model)

DTV/CBL *1

REMOTE CONTROL FEATURES

■ Controlling other components

Once you set the appropriate remote control codes (see

page 59), use the input selector buttons to select the

component you want to control. Note that some buttons

may not correctly operate the selected component.

This button functions only when the original remote control of

the component has a POWER button.

These buttons can operate your VCR when the remote control

code of your VCR is set in VCR and DTV/CBL is selected.

When you use this button to record a source, press it twice

repeatedly to prevent a malfunction.

Notes

POWER

STANDBY

POWER

V-A UXVCRDTV/CBLDVD

SLEEP

TUNERMD/CD-RCD

AMP

CODE SET

MUTE

INPUTMUTE

REC

MULTI CH IN

AUDIO

DISC SKIP

VOLUME

–

CHVOL

ENT.

+10

STRAIGHT

NIGHT

SPEAKERS

8765

5CH STEREOSTANDARD

432

MOVIEENTERTAINMUSIC

2CH STEREO

MUTE

INPUTMUTE

–––

SET MENU

ENTER

PRESET/CH

SRCH MODEBAND

LEVEL

TEST

MEMORY

A-E/CAT.

RETURN

DISPLAY

TITLE

–

Remote

control

DVD player VCR

Digital TV/

Cable TV

CD player

MD/CD

recorder

Tuner

(FM/AM)

Tuner

(XM)

1 AV P OWE R

Power

2 REC/

DISC SKIP

Disc skip

Rec

*2, 3

Disc Skip Rec (MD)

p Play Play

Play

Play Play

w Search backward Search backward

backward

Search backward Search backward

f Search forward Search forward

forward

Search forward Search forward

AUDIO Audio

e Pause Pause

Pause

Pause Pause

b Skip backward Skip backward Skip backward

a Skip forward Skip forward Skip forward

s Stop Stop

Stop

Stop Stop

3 0-9, +10

Numeric buttons Numeric buttons Numeric buttons Numeric buttons Numeric buttons Preset stations (1-8)

Preset channels (1-8)/

direct number access

4 TITLE

Title Band Band

5 PRESET/CH u

Up VCR channel up Preset up (1-8) Preset/channel up

PRESET/CH d Down VCR channel down Preset down (1-8) Preset/channel down

A-E/CAT. j Left Preset down (A-E)

Category/group

down

A-E/CAT. i Right Preset up (A-E) Category/group up

ENTER Select

6 RETURN

Return Memory

7 ENT.

Title/Index Enter Enter Index Index Enter

8 MENU

Menu Search mode

9 DISPLAY

Display Display Display Display Display

REMOTE CONTROL FEATURES

ADVANCED

OPERATION

You can control other components by setting the

appropriate remote control codes. You can set the remote

control codes for each input source. For a complete list of

available remote control codes, refer to “LIST OF

REMOTE CONTROL CODES” at the end of this manual.

The following table shows the default component

(Library: component category) and the remote control

code for each input source.

Remote Control Code Default Settings

You can control this unit only.

You can only set TV remote control codes in DTV/CBL.

You may not be able to operate your YAMAHA component even

if a YAMAHA remote control code is initially set as listed above.

In this case, try setting other YAMAHA remote control codes.

1 While holding down CODE SET, press one of

the input selector buttons to select the

component you want to set up.

You need to hold down CODE SET throughout this procedure.

2 While holding down CODE SET, press the

numeric buttons (0 to 9) to enter the three-

digit remote control code for the component

to be used.

Refer to “LIST OF REMOTE CONTROL CODES”

at the end of this manual.

• If the manufacturer of your component has more than one code,

try each of them until you find the correct one.

• You can only assign one remote control code to each input

selector button.

Setting remote control codes

Input

source

Library

(component

category)

Manufacturer

Default

code

CD CD YAMAHA 199

MD/CD-R CD-R YAMAHA 499

TUNER

TUNER YAMAHA Fixed

DVD DVD YAMAHA 699

DTV/

CBL*2

–––

VCR – – –

V-AU X – – –

Note

Notes

CODE SET

V-AUXVCRDTV/CBLDVD

MD/CD-RCD

While holding

down

8765

432

5CH STEREOSTANDARD

MOVIEENTERTAIN

SPEAKERS

2CH STEREO

MUSIC

CODE SET

While holding

down

TROUBLESHOOTING

Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below

or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized

YAMAHA dealer or service center.

■ General

TROUBLESHOOTING

Problem Cause Remedy

See

page

This unit fails to turn

on or enters the

standby mode soon

after the power is

turned on.

The power cable is not connected or the

plug is not completely inserted.

Connect the power cable firmly.

—

The speaker impedance setting is

incorrect.

Set the speaker impedance to match your speakers.

9, 11

The protection circuitry has been

activated.

Make sure that all speaker wire connections on this

unit and on all speakers are secure and that the wire

for each connection does not touch anything other

than its respective connection.

This unit has been exposed to a strong

external electric shock (such as lightning

or strong static electricity).

Set this unit to the standby mode, disconnect the

power cable, plug it back in after 30 seconds and then

use it normally.

—

No sound Incorrect input or output cable

connections.

Connect the cables properly. If the problem persists,

the cables may be defective.

13-17

No appropriate input mode has been

selected.

Select an appropriate input mode.

No appropriate input source has been

selected.

Select an appropriate input source with INPUT l /

h on the front panel (or the input selector buttons on

the remote control) and MULTI CH INPUT on the

front panel (or MULTI CH IN on the remote control).

23, 25

Speaker connections are not secure. Secure the connections.

The front speakers to be used have not

been selected properly.

Select the front speakers with SPEAKERS on the

front panel or SPEAKERS A/B on the remote control.

The volume is turned down. Turn up the volume.

—

The sound is muted. Press MUTE or VOLUME +/– on the remote control

to resume audio output and then adjust the volume.

Signals this unit cannot reproduce are

being input from a source component,

such as a CD-ROM.

Play a source whose signals can be reproduced by this

unit.

—

TROUBLESHOOTING

ADDITIONAL

INFORMATION

Problem Cause Remedy

See

page

The sound suddenly

goes off.

The protection circuitry has been activated

because of a short circuit, etc.

Check that the impedance selector setting is correct.

9, 11

Check that the speaker wires are not touching each

other and then turn this unit back on.

—

The sleep timer has turned off this unit. Turn on this unit, and play the source again.

—

The sound is muted. Press MUTE or VOLUME +/– on the remote control

to resume audio output.

Sound is heard from

the speaker on one

side only.

Incorrect cable connections. Connect the cables properly. If the problem persists,

the cables may be defective.

13-17

Incorrect settings in “SP LEVEL”. Adjust the “SP LEVEL” settings.

Only the center

speaker outputs

substantial sound.

When playing a monaural source with a

CINEMA DSP program, the source signal

is directed to the center channel, and the

front and surround speakers output effect

sounds.

No sound is heard

from the center

speaker.

“CENTER” in “SET MENU” is set to

“NONE”.

Set “CENTER” to “SML” or “LRG”.

One of the HiFi DSP programs (except for

5ch Stereo) has been selected.

Try another sound field program.

No sound is heard

from the surround

speakers.

“SURR” in “SPEAKER SET” is set to

“NONE”.

Set “SURR” to “SML” or “LRG”.

This unit is in the “STRAIGHT” mode

and a monaural source is being played

back.

Press STRAIGHT on the front panel so that

“STRAIGHT” disappears from the front panel

display.

No sound is heard

from the subwoofer.

“BASS” in “SPEAKER SET” is set to

“FRNT” when a Dolby Digital or DTS

signal is being played.

Set “BASS” to “SWFR” or “BOTH”.

“BASS” in “SPEAKER SET” is set to

“SWFR” or “FRNT” when a 2-channel

source is being played.

Set “BASS” to “BOTH”.

The source does not contain low-

frequency bass signals.

TROUBLESHOOTING

Problem Cause Remedy

See

page

Dolby Digital or DTS

sources cannot be

played. (Dolby Digital

or DTS indicator in

the front panel

display does not light

up.)

The connected component is not set to

output Dolby Digital or DTS digital

signals.

Make an appropriate setting following the operating

instructions for your component.

—

“INPUT MODE” is set to “ANALOG”. Set “INPUT MODE” to “AUTO” or “DTS”.

A humming sound is

heard.

Incorrect cable connections. Connect the audio cables firmly. If the problem

persists, the cables may be defective.

—

The volume level

cannot be increased,

or the sound is

distorted.

The component connected to the AUDIO

OUT (REC) jacks of this unit is turned

off.

Turn on the power of the component.

—

The sound effect

cannot be recorded.

It is not possible to record the sound effect

with a recording component.

A source cannot be

recorded by an

analog component

connected to the

AUDIO OUT (REC)

jacks.

The source component is not connected to

the analog AUDIO IN jacks of this unit.

Connect the source component to the analog AUDIO

IN jacks.

14, 17

The sound field

parameters and some

other settings of this

unit cannot be

changed.

“MEM. GUARD” in “OPTION MENU”

is set to “ON”.

Set “MEM. GUARD” to “OFF”.

This unit does not

operate properly.

The internal microcomputer has been

frozen by an external electric shock (such

as lightning or excessive static electricity)

or by a power supply with low voltage.

Disconnect the power cable from the AC wall outlet

and then plug it in again after about 30 seconds.

—

“CHECK SP WIRES”

appears in the front

panel display.

Speaker cables are short-circuited. Make sure all speaker cables are connected correctly.

There is noise

interference from

digital or radio

frequency equipment.

This unit is too close to the digital or high-

frequency equipment.

Move this unit further away from such equipment.

—

The picture is

disturbed.

The video source uses scrambled or

encoded signals to prevent dubbing.

This unit suddenly

enters the standby

mode.

The internal temperature becomes too

high and the overheat protection circuitry

has been activated.

Wait about 1 hour for this unit to cool down and then

turn it back on.

—

TROUBLESHOOTING

ADDITIONAL

INFORMATION

■ Tuner

■ XM Satellite Radio (U.S.A. model only)

If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel

display. In this case, read the cause and follow the corresponding remedies.

Problem Cause Remedy

See

page

FM stereo reception is

noisy.

The characteristics of FM stereo

broadcasts may cause this problem

when the transmitter is too far away or

the antenna input is poor.

Check the antenna connections.

Try using a high-quality directional FM

antenna.

—

Use the manual tuning method.

There is distortion, and

clear reception cannot

be obtained even with a

good FM antenna.

There is multi-path interference. Adjust the antenna position to eliminate

multi-path interference.

—

The desired station

cannot be tuned into

with the automatic

tuning method.

The signal is too weak. Use a high-quality directional FM antenna.

—

Use the manual tuning method.

Previously preset

stations can no longer

be tuned into.

This unit has been disconnected for a

long period.

Set preset stations.

37, 38

The desired station

cannot be tuned into

with the automatic

tuning method.

The signal is weak or the antenna

connections are loose.

Tighten the AM loop antenna connections

and orient it for the best reception.

—

Use the manual tuning method.

There are continuous

crackling and hissing

noises.

Noises result from lightning,

fluorescent lamps, motors, thermostats

and other electrical equipment.

Use an outdoor antenna and a ground wire.

This will help somewhat, but it is difficult to

eliminate all noise.

—

There are buzzing and

whining noises.

A TV set is being used nearby. Move this unit away from the TV set.

—

Status message Cause Remedy

See

page

CHECK ANTENNA

The XM Connect-and-Play digital antenna

is not connected to the XM jack of this

unit or does not work properly.

Check the XM Connect-and-Play digital antenna

connections and orient it for the best reception level.

UPDATING

The XM user encryption code is being

updated.

Wait until the encryption code is updated.

—

NO SIGNAL

The signal is too weak. Check the XM Connect-and-Play digital antenna

connections and orient it for the best reception level.

It takes longer than four seconds for audio

or text data to be decoded.

Wait until the decoding process has finished.

—

OFF AIR

The XM Satellite Radio channel you

selected is not currently broadcasting any

signals.

Check the channel number again or select another

XM Satellite Radio channel.

—

<XM> - - -

The Channel Station ID (SID) is no longer

available.

- - - / - - -

No artist name or song title is available.

<CAT> - - -

No channels are available for the selected

category.

Select another channel category by pressing

CATEGORY on the front panel (or A-E/CAT. j / i on

the remote control) repeatedly.

TROUBLESHOOTING

■ Remote control

Problem Cause Remedy

See

page

The remote control

does not work nor

function properly.

Wrong distance or angle. The remote control functions within a maximum

range of 6 m (20 ft) and no more than 30 degrees off-

axis from the front panel.

Direct sunlight or lighting (from an

inverter type of fluorescent lamp, etc.) is

striking the remote control sensor of this

unit.

Reposition this unit.

—

The batteries are weak. Replace all batteries.

The remote control code is not correctly

set.

Set the remote control code correctly using “LIST OF

REMOTE CONTROL CODES” at the end of this

manual.

Try setting another code for the same manufacturer

using “LIST OF REMOTE CONTROL CODES” at

the end of this manual.

Even if the remote control code is

correctly set, there are some models that

do not respond to the remote control.

RESETTING THE SYSTEM

ADDITIONAL

INFORMATION

Use this feature to reset all the parameters of this unit to the initial factory settings.

• This procedure completely resets all the parameters of this unit including the “SET MENU” parameters.

• The initial factory settings are activated next time you turn on this unit.

To cancel the initialization procedure at any time without making any changes, press STRAIGHT repeatedly to select “CANCEL” and

then press STANDBY/ON on the front panel.

1 Press STANDBY/ON on the front panel to set

this unit to the standby mode.

2 Press and hold STRAIGHT on the front panel

and then press STANDBY/ON to turn on this

unit.

The advanced setup menu appears in the front panel

display.

3 Press STRAIGHT on the front panel

repeatedly to select “RESET”.

Select “CANCEL” to cancel the initialization

procedure without making any changes.

4 Press STANDBY/ON on the front panel to

confirm your selection and set this unit to the

standby mode.

RESETTING THE SYSTEM

Notes

PRESET/TUNING/CH

VOLUME

STANDBY

/ON

PHONES

SILENT CINEMA

SPEAKERS

A/B/OFF

FM/AMPRESET/TUNING

A/B/C/D/E

AUTO/MAN'LMAN'L/AUTO FM

MEMORY

TUNING MODE

EFFECT

STRAIGHT

TONE CONTROL

BASS/TREBLE

l PROGRAM h

EDIT

INPUT MODE

l INPUT h

MULTI CH INPUT

SET MENU

SEARCH MODE

CATEGORY

DISPLAY

2,31,2,4

(U.S.A. model)

STANDBY

/ON

EFFECT

STRAIGHT

STANDBY

/ON

While holding

down

EFFECT

STRAIGHT

PRESET -RESET

STANDBY

/ON

GLOSSARY

■ Dolby Digital

Dolby Digital is a digital surround sound system that gives

you completely independent multi-channel audio. With 3

front channels (front L/R and center), and 2 surround

stereo channels, Dolby Digital provides 5 full-range audio

channels. With an additional channel especially for bass

effects, called LFE (Low Frequency Effect), the system

has a total of 5.1-channels (LFE is counted as 0.1

channel). By using 2-channel stereo for the surround

speakers, more accurate moving sound effects and

surround sound environment are possible than with Dolby

Surround. The wide dynamic range from maximum to

minimum volume reproduced by the 5 full-range channels

and the precise sound orientation generated using digital

sound processing provide listeners with unprecedented

excitement and realism. With this unit, any sound

environment from monaural up to a 5.1-channel

configuration can be freely selected for your enjoyment.

■ Dolby Pro Logic II

Dolby Pro Logic II is an improved technique used to

decode vast numbers of existing Dolby Surround sources.

This new technology enables a discrete 5-channel

playback with 2 front left and right channels, 1 center

channel, and 2 surround left and right channels instead of

only 1 surround channel for conventional Pro Logic

technology. There are three modes available: “Music

mode” for music sources, “Movie mode” for movie

sources and “Game mode” for game sources.

■ Dolby Surround

Dolby Surround uses a 4-channel analog recording system

to reproduce realistic and dynamic sound effects: 2 front

left and right channels (stereo), a center channel for dialog

(monaural), and a surround channel for special sound

effects (monaural). The surround channel reproduces

sound within a narrow frequency range. Dolby Surround is

widely used with nearly all video tapes and laser discs,

and in many TV and cable broadcasts as well. The Dolby

Pro Logic decoder built into this unit employs a digital

signal processing system that automatically stabilizes the

volume on each channel to enhance moving sound effects

and directionality.

■ DTS (Digital Theater Systems)

Digital Surround

DTS digital surround was developed to replace the analog

soundtracks of movies with a 5.1-channel digital sound

track, and is now rapidly gaining popularity in movie

theaters around the world. Digital Theater Systems Inc.

has developed a home theater system so that you can enjoy

the depth of sound and natural spatial representation of

DTS digital surround in your home. This system produces

practically distortion-free 5.1-channel sound (technically,

left, right and center channels, 2 surround channels, plus

an LFE 0.1 channel as a subwoofer, for a total of 5.1-

channels).

■ ITU-R

ITU-R is the radio communication sector of the ITU

(International Telecommunication Union). ITU-R

recommends a standard speaker placement which is used

in many critical listening rooms, especially for mastering

purposes.

■ LFE 0.1 channel

This channel reproduces low-frequency bass signals. The

frequency range of this channel is from 20 Hz to 120 Hz.

This channel is counted as 0.1 because it only enforces a

low-frequency range compared to the full-range

reproduced by the other 5 channels in Dolby Digital or

DTS 5.1-channel systems.

■ PCM (Linear PCM)

Linear PCM is a signal format under which an analog

audio signal is digitized, recorded and transmitted without

using any compression. This is used as a method of

recording CDs and DVD audio. The PCM system uses a

technique for sampling the size of the analog signal per

very small unit of time. Standing for “Pulse Code

Modulation”, the analog signal is encoded as pulses and

then modulated for recording.

■ Sampling frequency and number of

quantized bits

When digitizing an analog audio signal, the number of

times the signal is sampled per second is called the

sampling frequency, while the degree of fineness when

converting the sound level into a numeric value is called

the number of quantized bits. The range of rates that can

be played back is determined based on the sampling rate,

while the dynamic range representing the sound level

difference is determined by the number of quantized bits.

In principle, the higher the sampling frequency, the wider

the range of frequencies that can be played back, and the

higher the number of quantized bits, the more finely the

sound level can be reproduced.

GLOSSARY

Audio information

GLOSSARY

ADDITIONAL

INFORMATION

■ CINEMA DSP

Since the Dolby Surround and DTS systems were

originally designed for use in movie theaters, their effect

is best felt in a theater having many speakers designed for

acoustic effects. Since home conditions, such as room

size, wall material, number of speakers, and so on, can

differ so widely, it is inevitable that there are differences in

the sound heard. Based on a wealth of actually measured

data, YAMAHA CINEMA DSP uses YAMAHA original

DSP technology to combine Dolby Pro Logic, Dolby

Digital and DTS systems to provide the audiovisual

experience of movie theater in the listening room of your

own home.

■ SILENT CINEMA

YAMAHA has developed a natural, realistic sound effect

DSP algorithm for headphones. Parameters for

headphones have been set for each sound field program so

that accurate representations of all the sound field

programs can be enjoyed on headphones.

■ Virtual CINEMA DSP

YAMAHA has developed a Virtual CINEMA DSP

algorithm that allows you to enjoy DSP surround effects

even without any surround speakers by using virtual

surround speakers. It is even possible to enjoy Virtual

CINEMA DSP using a minimal two-speaker system that

does not include a center speaker.

■ Component video signal

With the component video signal system, the video signal

is separated into the Y signal for the luminance and the PB

and P

R signals for the chrominance. Color can be

reproduced more faithfully with this system because each

of these signals is independent. The component signal is

also called the “color difference signal” because the

luminance signal is subtracted from the color signal. A

monitor with component input jacks is required in order to

output component signals.

■ Composite video signal

With the composite video signal system, the video signal

is composed of three basic elements of a video picture:

color, brightness and synchronization data. A composite

video jack on a video component transmits these three

elements combined.

Sound field program information Video information

SPECIFICATIONS

AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround

[U.S.A. and Canada models]

1 kHz, 0.9% THD, 8 Ω/6 Ω ............................................ 110 W

[Other models]

1 kHz, 0.9% THD, 6 Ω ................................................... 100 W

• Maximum Output Power

[Europe model]

1 kHz, 0.7% THD, 4 Ω ................................................... 105 W

• Maximum Power

[Asia, China, Korea and General models]

1 kHz, 10% THD, 6 Ω ..................................................... 110 W

• Dynamic Power

[U.S.A. and Canada models] (Impedance Selector: 8 Ω)

(IHF, 8/6/4/2 Ω) ......................................... 120/140/160/180 W

[Other models]

(IHF, 6/4/2 Ω) .................................................... 105/135/165 W

• Frequency Response

CD, etc. to Front L/R ............................ 10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

1 kHz, 50 W, 6 Ω, Front L/R .................................... 0.06% or less

• Signal to Noise Ratio (IHF-A Network)

CD (250 mV) to Front L/R, Effect Off ................. 100 dB or more

• Residual Noise (IHF-A Network)

Front L/R ................................................................ 150 µV or less

• Channel Separation (1 kHz/10 kHz)

CD, etc. (5.1 kΩ terminated) to Front L/R

................................................................... 60 dB/45 dB or more

• Tone Control (Front L/R)

BASS Boost/Cut .................................................... ±10 dB/100 Hz

TREBLE Boost/Cut .............................................. ±10 dB/20 kHz

• Phones Output .......................................................... 400 mV/470 Ω

• Input Sensitivity/Input Impedance

CD, etc. ................................................................. 200 mV/47 kΩ

MULTI CH INPUT ............................................... 200 mV/47 kΩ

• Output Level/Output Impedance

AUDIO OUT (REC) ............................................ 200 mV/1.2 kΩ

SUBWOOFER OUTPUT ........................................... 4 V/1.2 kΩ

VIDEO SECTION

• Video Signal Type

[U.S.A., Canada, Korea and General models] .................... NTSC

[Other models] ....................................................................... PAL

• Component Signal Level .............................................. 1 Vp-p/75 Ω

• Signal to Noise Ratio ................................................ 50 dB or more

• Frequency Response (MONITOR OUT)

Video Signal ............................................. 5 Hz to 10 MHz, –3 dB

Component Signal .................................... 5 Hz to 60 MHz, –3 dB

FM SECTION

• Tuning Range

[U.S.A. and Canada models] .......................... 87.5 to 107.9 MHz

[Other models] ............................................ 87.50 to 108.00 MHz

• 50 dB Quieting Sensitivity (IHF, 100% mod.)

Mono ................................................................. 2.8 µV (20.2 dBf)

• Signal to Noise Ratio (IHF)

Mono/Stereo ............................................................. 73 dB/70 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo ................................................................ 0.5%/0.5%

AM SECTION

• Tuning Range

[U.S.A. and Canada models] .............................. 530 to 1710 kHz

[Asia and General models] ................. 530/531 to 1710/1611 kHz

[Other models] .................................................... 531 to 1611 kHz

GENERAL

• Power Supply

[U.S.A. and Canada models] ............................. 120 V AC, 60 Hz

[Australia model] ............................................... 240 V AC, 50 Hz

[U.K. and Europe models] ................................. 230 V AC, 50 Hz

[Korea model] .................................................... 220 V AC, 60 Hz

[China model] .................................................... 220 V AC, 50 Hz

[Asia and General models]

............................................. 110-120/220–240 V AC, 50/60 Hz

• Power Consumption

[U.S.A. and Canada models] ................................. 240 W/320 VA

[Other models] .................................................................... 240 W

• Standby Power Consumption

[U.S.A. and Canada models] ............................................... 0.5 W

[Other models] ..................................................................... 0.7 W

• Dimensions (W x H x D).................................. 435 x 151 x 315 mm

(17-1/8” x 5-15/16” x 12-7/16”)

• Weight .............................................................. 9.0 kg (19 lbs 13 oz)

* Specifications are subject to change without notice.

SPECIFICATIONS

APPENDIX

LIST OF REMOTE

CONTROL CODES

ADMIRAL 292, 293

AIWA 294, 276, 283,

284

AKAI 295, 296

ALBA 296

AOC 297

BELL&HOWELL 292

BESTAR 298

BLAUPUNKT 229, 222

BLUE SKY 298

BRANDT 223

BROCSONIC 297

BUSH 296

CLATRONIC 298

CRAIG 224

CROSLEX 225

CURTIS MATHIS 297, 226

DAEWOO 297, 298, 224,

227, 228

DAYTRON 239

DUAL 298

DWIN 293

EMERSON 297, 224, 239,

232

FERGUSON 223, 265, 266

FIRST LINE 298

FISHER 295, 233

FRABA 298

FUNAI 277, 278

GE 293, 297, 234,

235, 236

GOODMANS 296, 298, 223

GRUNDIG 229, 238, 249

HITACHI 297, 239, 242,

243, 285

ICE 296

IRRADIO 296

ITT/NOKIA 244, 245

JC PENNY 293, 297, 234,

237

JVC 296, 246, 247,

286

KENDO 298

KTV 297, 239

LG/GOLDSTAR 297, 298,

239, 237

LOEWE 298, 248

LXI 293, 297, 225,

226, 233

MAGNAVOX 297, 225, 239

MARANTZ 298

MATSUI 295

MEMOREX 297

MITSUBISHI 299, 297, 259,

287

NEC 297, 252, 282

NOKIA 244, 245

NOKIA OCEANIC 245

NORDMENDE 265, 266

ONWA 296

PANASONIC 234, 235, 236,

253, 288, 211

PHILCO 297, 225, 239

PHILIPS 225

PIONEER 226, 235, 254,

255, 268

PORTLAND 297, 256

PROSCAN 293

PROTON 297

QUASAR 234, 235

RADIO SHACK299, 293, 297

RCA 293, 297, 234,

256, 257, 258

SABA 223, 269, 265,

266

SAMPO 297

SAMSUNG 297, 239, 248,

262, 275

SANYO 295, 233, 279,

272, 273, 274,

212

SCHNEIDER 296

SCOTT 297

SHARP 292, 239, 232,

213, 216

SIEMENS 229

SIGNATURE 292

SONY 263, 214

SYLVANIA 297, 225

TELEFUNKEN 269, 264, 265,

266

THOMSON 223, 266

TOSHIBA 292, 226, 267,

215

VIDECH 297, 242

WARDS 297, 239, 232

YAMAHA 299, 292, 253,

242

VCR

ADMIRAL 395

AIWA 396, 397, 398,

329

AKAI 322, 323, 324

AUDIO DYNAMIC 392, 394

BELL&HOWELL 393

BLAUPUNKT 325, 326

BROCSONIC 327

BUSH 322

CANON 325, 328

CGM 396, 332

CITIZEN 396

CRAIG 396, 363

CURTIS MATHIS 397, 328,

333

DAEWOO 328, 334, 335

DBX 392, 394

DIMENSIA 333

DYNATECH 397

EMERSON 327, 334, 396,

397

FISHER 393, 336

FUNAI 397

GE 328, 333, 387

GO VIDEO 353

GOODMANS 334, 337

GRUNDIG 332, 338

HITACHI 325, 333, 349,

342, 343

INSTANT REPLAY 325, 328

ITT/NOKIA 393

JC PENNY 392, 393, 394,

328, 333, 349,

396, 363

JVC 392, 394, 344,

345, 346, 347

KENDO 396

KENWOOD 392, 394, 396

LG/GOLDSTAR 396, 388

LOEWE 396, 337

LUXOR 395

LXI 393, 396, 397,

336, 349

MAGNAVOX 325, 326, 328

MARANTZ 392, 394

MARTA 396

MATSUI 396

MEMOREX 328, 336, 396,

397

MINOLTA 333, 349

MITSUBISHI 399, 344, 348,

359, 352, 353

MTC 363, 397

MULTITECH 397, 348, 354

NEC 392, 394, 344,

383

NOKIA 393, 395

NOKIA OCEANIC 395

OKANO 323

OLYMPIC 325, 328

ORION 327

PANASONIC 325, 328, 355,

378, 384, 385,

386

PENTAX 333, 349

PHILCO 325, 328, 397

PHILIPS 325, 326, 328,

337, 356, 357

PHONOLA 337

PILOT 396

PIONEER 325

QUASAR 325, 328

RCA/PROSCAN 325, 326,

328, 333, 335,

349, 358, 369,

363, 397

REALISTIC 393, 397, 328,

336, 359, 362,

396, 363

SAMSUNG 354, 358, 363,

364, 365, 366

SANSUI 394

SANYO 393, 336, 367

SCHNEIDER 337

SCOTT 399, 335, 336,

348, 359, 352,

354, 358

SELECO 322

SHARP 395, 362, 382

SIEMENS 393

SIGNATURE 2000 395, 397

SONY 368, 379, 372,

373, 374, 375

SYLVANIA 397, 325, 326,

328

SYMPHONIC 397

TANDBERG 334

TANDY 397

TASHIRO 396

TATUNG 392, 394

TEAC 392, 394, 397

TECHNICS 325, 328

TEKNIKA 396

TELEFUNKEN 376, 377

THOMAS 397

THORN 393, 396

TOSHIBA 335, 369, 389

TOTEVISON 363, 396

UNITECH 363

UNIVERSUM 396, 327, 376

VIDEOSONIC 363

W.WHOUSE 396

WARDS 395, 396, 336,

362

YAMAHA 399, 392, 393,

394

ZENITH 344, 368, 379,

396, 397

DVD player

DENON 623, 624

FUNAI 625

HITACHI 626

JVC 627

KENWOOD 628

LG/GOLD STAR 645

MITSUBISHI 629

ONKYO 632, 633, 634

PANASONIC 623, 635

PHILIPS 699, 647

PIONEER 636, 637, 638

RCA 639

SAMSUNG 642

SHARP 643

SONY 644

THOMSON 646

TOSHIBA 634

YAMAHA 699, 622, 623,

647

MD player

YAMAHA 599

CD player

YAMAHA 199

CD recorder

YAMAHA 499

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in China

WG72080

01EN_HTR-5930_U_cv-4.fm Page iii Monday, December 12, 2005 9:33 AM

Documenttranscriptie

01EN_HTR-5930_U_cv-1.fm Page 1 Monday, December 12, 2005 8:55 AM U HTR-5930 AV Receiver OWNER’S MANUAL IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1 2 3 4 5 6 7 8 9 i 11 Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and use instructions should be followed. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 12 13 14 15 16 17 18 19 Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization – This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, IMPORTANT SAFETY INSTRUCTIONS d) 20 21 22 23 If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 24 Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING MAST ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810–20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810–21) GROUND CLAMPS Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H) NEC – NATIONAL ELECTRICAL CODE FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3 NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. ii CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. 5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: – Other components, as they may cause damage and/or discoloration on the surface of this unit. – Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury. – Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit. 6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury. 7 Do not plug in this unit to a wall outlet until all connections are complete. 8 Do not operate this unit upside-down. It may overheat, possibly causing damage. 9 Do not use force on switches, knobs and/or cords. 10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cord. 11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified. 13 To prevent damage by lightning, keep the power cord and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm. 14 Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons. 15 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet. 16 Install this unit near the AC outlet and where the AC power plug can be reached easily. 17 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that this unit is faulty. 18 Before moving this unit, press STANDBY/ON to set this unit in the standby mode, and disconnect the AC power plug from the wall outlet. 19 VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC wall outlet. Voltages are 110–120/220–240 V AC, 50/60 Hz. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off by STANDBY/ON. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power. FOR CANADIAN CUSTOMERS To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003. IMPORTANT Please record the serial number of this unit in the space below. MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. iii Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. CONTENTS FEATURES............................................................. 2 GETTING STARTED............................................ 3 Supplied accessories .................................................. 3 Installing batteries in the remote control ................... 3 CONTROLS AND FUNCTIONS ......................... 4 ADVANCED OPERATION SET MENU ............................................................52 Using SET MENU................................................... 53 SOUND MENU....................................................... 53 INPUT MENU......................................................... 55 OPTION MENU...................................................... 56 REMOTE CONTROL FEATURES ...................57 Controlling this unit, a TV, or other components.... 57 Setting remote control codes ................................... 59 PREPARATION Front panel ................................................................. 4 Remote control........................................................... 6 Front panel display .................................................... 8 Rear panel .................................................................. 9 INTRODUCTION INTRODUCTION ADDITIONAL INFORMATION PREPARATION CONNECTIONS .................................................. 10 Audio information ................................................... 66 Sound field program information ............................ 67 Video information.................................................... 67 BASIC OPERATION Placing speakers....................................................... 10 Connecting speakers ................................................ 11 Information on jacks and cable plugs ...................... 13 Connecting video components................................. 14 Connecting audio components................................. 17 Connecting the FM and AM antennas ..................... 18 Connecting the power cable..................................... 19 Turning on the power............................................... 19 TROUBLESHOOTING .......................................60 RESETTING THE SYSTEM...............................65 GLOSSARY...........................................................66 SPECIFICATIONS...............................................68 SETUP ................................................................... 20 Using BASIC MENU .............................................. 20 ADVANCED OPERATION BASIC OPERATION PLAYBACK.......................................................... 23 Basic operations....................................................... 23 Additional operations............................................... 25 SOUND FIELD PROGRAMS............................. 30 Sound field program descriptions............................ 31 RECORDING ....................................................... 34 FM/AM TUNING ................................................. 35 ADDITIONAL INFORMATION Automatic tuning ..................................................... 35 Manual tuning.......................................................... 36 Automatic preset tuning........................................... 37 Manual preset tuning ............................................... 38 Selecting preset stations........................................... 39 Exchanging preset stations ...................................... 40 XM® SATELLITE RADIO TUNING ............... 41 What is XM Satellite Radio? ................................... 41 Connecting the XM Connect-and-Play digital antenna ..................................................... 41 XM Satellite Radio controls and functions.............. 42 Activating XM Satellite Radio ................................ 43 Basic XM Satellite Radio operations....................... 44 Selecting the XM Satellite Radio search mode ....... 45 Setting XM Satellite Radio preset channels ............ 49 Displaying the XM Satellite Radio information...... 50 1 FEATURES FEATURES Built-in 5-channel power amplifier Sophisticated AM/FM tuner ◆ Minimum RMS output power ◆ 40-station random and direct preset tuning ◆ Automatic preset tuning ◆ Preset station shifting capability (preset editing) [U.S.A. and Canada models] (0.9% THD, 1 kHz, 8 Ω/6 Ω) Front: 110 W + 110 W Center: 110 W Surround: 110 W + 110 W [Other models] (0.9% THD, 1 kHz, 6 Ω) Front: 100 W + 100 W Center: 100 W Surround: 100 W + 100 W Decoders and DSP circuits ◆ Proprietary YAMAHA technology for the creation of multi-channel surround sound ◆ Dolby Digital decoder ◆ Dolby Pro Logic/Dolby Pro Logic II decoder ◆ DTS decoder ◆ Virtual CINEMA DSP ◆ SILENT CINEMA™ XM Satellite Radio (U.S.A. model only) ◆ XM Satellite Radio tuning capability (Using the “XM Connect-and-Play digital antenna” sold separately) Other features ◆ 192-kHz/24-bit D/A converter ◆ 6 additional input jacks for discrete multi-channel input ◆ A SET MENU that allows you to optimize this unit to suit your individual audiovisual system ◆ Component video input/output capability (3 COMPONENT VIDEO INs and 1 MONITOR OUT) ◆ Optical and coaxial digital audio signal jacks ◆ Sleep timer ◆ Night listening mode ◆ Remote control with preset remote control codes • y indicates a tip for your operation. • Some operations can be performed by using either the buttons on the front panel or the ones on the remote control. In case the button names differ between the front panel and the remote control, the button name on the remote control is given in parentheses. • This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. “SILENT CINEMA” is a trademark of YAMAHA CORPORATION. 2 “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. The XM name and related logos are registered trademarks of XM Satellite Radio Inc. GETTING STARTED GETTING STARTED INTRODUCTION Supplied accessories Check that you received all of the following parts. Remote control STANDBY POWER TV AV CD MD/CD-R TUNER SLEEP DVD DTV/CBL VCR POWER POWER Batteries (2) (AA, R06, UM-3) AM loop antenna V-AUX MULTI CH IN REC AUDIO DISC SKIP CODE SET AMP TV + VOL + + CH VOLUME – – MUTE INPUT 2CH STEREO MUSIC – 1 2 MUTE STANDARD 5 ENTERTAIN 3 A SPEAKERS B 9 4 0 7 8 NIGHT STRAIGHT +10 ENT. LEVEL SET MENU TITLE MENU BAND – Indoor FM antenna (U.K., Europe, Australia and Korea models) SRCH MODE + ENTER TEST A-E/CAT. DISPLAY RETURN MEMORY Indoor FM antenna (U.S.A., Canada, China, Asia and General models) MOVIE 5CH STEREO 6 PRESET/CH Installing batteries in the remote control Notes 2 1 3 1 Press the part and slide the battery compartment cover off. 2 Insert the two supplied batteries (AA, R06, UM-3) according to the polarity markings (+ and –) on the inside of the battery compartment. 3 Slide the cover back until it snaps into place. • Change all of the batteries if you notice a decrease in the operation range of the remote control. • Do not use an old battery together with a new one. • Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color. • If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. • Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations. • If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the remote control code and program any acquired functions that may have been cleared. 3 CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel Note The XM Satellite Radio controlling functions in the following buttons (SEARCH MODE, XM, CATEGORY, PRESET/TUNING/CH l / h, MEMORY, and DISPLAY) are only applicable to the U.S.A. model and are operational only when “XM” is selected as the input source. For details, see “XM Satellite Radio controls and functions” on page 42. 1 2 3 4 5 6 7 8 9 0 VOLUME STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM XM A/B/C/D/E PHONES SPEAKERS A/B/OFF STRAIGHT l PRESET/TUNING/CH h MEMORY SET MENU MAN'L/AUTO FM NEXT l PROGRAM TUNING MODE DISPLAY CATEGORY EDIT h l INPUT INPUT MODE AUTO/MAN'L h MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA (U.S.A. model) A B C D E F 1 STANDBY/ON Turns on this unit or sets it to the standby mode. Notes • In the standby mode, this unit consumes a small amount of power in order to receive infrared-signals from the remote control. • When you turn on this unit, there will be a 4 to 5-second delay before this unit can reproduce sound. 2 Remote control sensor Receives signals from the remote control. 3 PRESET/TUNING • Switches the function of PRESET/TUNING/CH l / h between selecting preset station numbers and selecting the tuning frequency. • Edits the assignments of present stations. 4 FM/AM Switches the reception band between FM and AM. 5 A/B/C/D/E Selects one of the 5 preset station groups (A to E) when “FM” or “AM” is selected as the input source. G H I 6 PRESET/TUNING/CH l / h • Selects one of the 8 preset station numbers (1 to 8) when “FM” or “AM” is selected as the input source. The colon (:) is displayed in the front panel display. • Selects the tuning frequency when “FM” or “AM” is selected as the input source. The colon (:) is not displayed in the front panel display. 7 Front panel display Shows information about the operational status of this unit. 8 MEMORY Stores a preset station in the memory. Hold down this button for more than 3 seconds to start automatic preset tuning. 9 TUNING MODE Switches between automatic tuning (the AUTO indicator is turned on) and manual tuning (the AUTO indicator is turned off). 0 VOLUME Controls the output level of all audio channels. Note This does not affect the AUDIO OUT (REC) level. 4 CONTROLS AND FUNCTIONS A PHONES jack Outputs audio signals for private listening with headphones. INTRODUCTION Notes • When you connect headphones, no signals are output at the SUBWOOFER OUTPUT jack or at the SPEAKERS terminals. • All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels. B SPEAKERS Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel. C STRAIGHT Turns the sound field programs off or on. When this unit is in the “STRAIGHT” mode, 2-channel or multi-channel input signals are output directly from their respective speakers without effect processing. D TONE CONTROL Adjusts the bass/treble balance of the front left and right speakers in conjunction with BASS/TREBLE +/–. E BASS/TREBLE +/– Adjusts the bass/treble balance of the front left and right speakers in conjunction with TONE CONTROL. F PROGRAM l / h Selects sound field programs. G INPUT MODE Selects either digital or analog input signals exclusively or sets this unit to automatically detect the type of input signals and select the corresponding input signals when one component is connected via both digital and analog connections. H INPUT l / h Selects the desired input source. I MULTI CH INPUT Selects the component connected to the MULTI CH INPUT jacks as the input source. Note The input source connected to the MULTI CH INPUT jacks takes priority over the source selected with INPUT l / h on the front panel (or the input selector buttons on the remote control). 5 CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the remote control used to control this unit. To operate other components, see “REMOTE CONTROL FEATURES” on page 57. Note The XM Satellite Radio controlling functions in the following buttons (BAND, MEMORY, SRCH MODE, DISPLAY, cursor buttons u / d / j / i, numeric buttons and ENT.) are only applicable to the U.S.A. model and are operational only when “XM” is selected as the input source. For details, see “XM Satellite Radio controls and functions” on page 42. 1 2 8 POWER POWER POWER TV AV STANDBY CD MD/CD-R TUNER SLEEP DVD DTV/CBL VCR V-AUX MULTI CH IN REC AUDIO DISC SKIP CODE SET AMP + + VOL CH VOLUME – – – MUTE INPUT 2CH STEREO MUSIC 1 2 MUTE 3 STANDARD 5 6 7 MOVIE 9 0 3 4 6 9 0 7 8 NIGHT STRAIGHT +10 ENT. LEVEL SET MENU TITLE MENU BAND SRCH MODE – A-E/CAT. DISPLAY RETURN MEMORY + ENTER TEST 1 Infrared signal transmitter Outputs infrared control signals. Aim the transmitter at the component you want to operate. 2 Input selector buttons Select the input source you want to control. 3 Sound field program selector buttons Select sound field programs. 4 SPEAKERS A/B Turn on or off the set of front speakers connected to the A and/or B terminals on the rear panel. 6 Cursor buttons u / d / j / i Select and adjust sound field program parameters or SET MENU items. 7 TEST Outputs the test tone to adjust the speaker levels. A B 8 STANDBY Sets this unit to the standby mode. C 9 POWER Turns on this unit. D 0 SLEEP Sets the sleep timer. E A MULTI CH IN Selects the component connected to the MULTI CH INPUT jacks as the input source when using an external decoder, etc. F G H B CODE SET Use to set up remote control codes. 5CH STEREO A SPEAKERS B 4 5 ENTERTAIN Press AMP to control this unit. 5 LEVEL Selects the speaker channel to be adjusted. TV + ■ Controlling this unit C AMP Sets the remote control to the operation mode of this unit. D VOLUME +/– Controls the output level of all audio channels. PRESET/CH Note This does not affect the AUDIO OUT (REC) level. (U.S.A. model) 6 CONTROLS AND FUNCTIONS E MUTE Mutes the audio output. Press again to restore the audio output to the previous volume level. The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation. G NIGHT Turns on or off the night listening mode. 30º H SET MENU Enters “SET MENU”. 30º INTRODUCTION F STRAIGHT Turns the sound field programs off or on. When this unit is in the “STRAIGHT” mode, 2-channel or multi-channel input signals are output directly from their respective speakers without effect processing. ■ Using the remote control Approximately 6 m (20 ft) ■ Controlling the TUNER functions To control the TUNER function, press TUNER and then BAND repeatedly to select “FM” or “AM” as the input source. 3 Numeric buttons Select preset stations. 5 BAND Switches the reception band between “FM” and “AM”. 6 A-E/CAT. j / i, PRESET/CH u / d Press A-E/CAT. j / i to select a preset station group (A to E) and PRESET/CH u / d to select a preset station number (1 to 8). Notes • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following types of conditions: – places of high humidity, such as near a bath – places of high temperature, such as near a heater or stove – places of extremely low temperatures – dusty places 7 CONTROLS AND FUNCTIONS Front panel display Note The XM indicator is only applicable to the U.S.A. model and lights up only when “XM” is selected as the input source. For details, see “Basic XM Satellite Radio operations” on page 44. 1 23 4 VCR VIRTUAL SILENT CINEMA STANDARD DIGITAL NIGHT V-AUX DTV/CBL 5 DVD TUNER CD AUTO TUNED STEREO MEMORY MUTE VOLUME SP AB HiFi DSP PL XM SLEEP ft PL PCM 8 MD/CD-R 6 7 dB 9 0 A B C D E dB L C R LFE SL SR F G H I J K (U.S.A. model only) 1 Decoder indicators The respective indicator lights up when any of the decoders of this unit function. 2 VIRTUAL indicator Lights up when Virtual CINEMA DSP is active. 3 SILENT CINEMA indicator Lights up when headphones are connected and a sound field program is selected. 4 Input source indicators A corresponding cursor lights up to show the currently selected input source. 5 MEMORY indicator Flashes to show that a station can be stored. 6 MUTE indicator Flashes while the MUTE function is on. 7 VOLUME level indicator Indicates the current volume level. 8 PCM indicator Lights up when this unit is reproducing PCM (Pulse Code Modulation) digital audio signals. 9 STANDARD indicator Lights up when the “STANDARD” program is selected. 0 NIGHT indicator Lights up when you select a night listening mode. A Speaker indicators Light up according to the set of front speakers selected. B Headphones indicator Lights up when headphones are connected. 8 C CINEMA DSP indicator Lights up when you select a CINEMA DSP program. D HiFi DSP indicator Lights up when you select a HiFi DSP program. E Multi-information display Shows the name of the current program and other information when adjusting or changing settings. F AUTO indicator Lights up when this unit is in the automatic tuning mode. G TUNED indicator Lights up when this unit is tuned into a station. H STEREO indicator Lights up when this unit is receiving a strong signal for an FM stereo broadcast while the AUTO indicator is lit. I SLEEP indicator Lights up while the sleep timer is on. J Input channel indicators Indicate the channel components of the current digital input signal. K XM indicator Lights up when “XM” is selected as the input source. CONTROLS AND FUNCTIONS Rear panel 2 XM 3 MULTI CH INPUT AUDIO R 4 VIDEO L 5 TUNER COMPONENT VIDEO Y PB INTRODUCTION 1 IMPEDANCE SELECTOR PR DVD FRONT DVD 3 AM ANT DTV/ CBL DTV/ CBL SURROUND DIGITAL INPUT A DVD B GND CENTER SUB WOOFER VCR FM ANT C V-AUX SPEAKERS COAXIAL OPTICAL DTV/CBL 2 1 R OUT R A FRONT L B MONITOR OUT VCR IN (PLAY) DVD CLASS 2 WIRING IN CD FRONT SURROUND L CENTER R L MD/ CD-R OUT (REC) SUB WOOFER R MONITOR OUT L AUDIO OUTPUT (U.S.A. model) 6 7 8 1 XM jack (U.S.A. model only) See page 41 for connection information. 2 MULTI CH INPUT jacks See page 16 for connection information. 3 Video component jacks See page 14 for connection information. 9 0 0 IMPEDANCE SELECTOR (U.S.A. and Canada models only) See page 11 for details. VOLTAGE SELECTOR (Asia and General models only) See page 19 for details. 4 COMPONENT VIDEO jacks See page 16 for connection information. 5 Antenna terminals See page 18 for connection information. 6 DIGITAL INPUT jacks See pages 14 and 15 for connection information. 7 Audio component jacks See page 17 for connection information. 8 SUBWOOFER OUTPUT jack See page 12 for connection information. 9 SPEAKERS terminals See page 11 for connection information. 9 CONNECTIONS CONNECTIONS ■ Front speakers (FL and FR) Placing speakers The speaker layout below shows the standard ITU-R* speaker setting. You can use it to enjoy CINEMA DSP and multi-channel audio sources. * ITU-R is the radio communication sector of the ITU (International Telecommunication Union). FL C FR SL SR 80˚ SR ■ Subwoofer (SW) FR SW SR C SL 1.8 m (6 ft) 10 The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a center speaker, you can do without it. Best results, however, are obtained with the full system. Place the center speaker centrally between the front speakers and as close to the monitor as possible, such as directly over or under it. The surround speakers are used for effect and surround sounds. Place these speakers behind your listening position, facing slightly inwards, about 1.8 m (6 ft) above the floor. 60˚ FL ■ Center speaker (C) ■ Surround speakers (SL and SR) 30˚ SL The front speakers are used for the main source sound plus effect sounds. Place these speakers an equal distance from the ideal listening position. The distance of each speaker from each side of the video monitor should be the same. The use of a subwoofer, such as the YAMAHA Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, but also for high fidelity reproduction of the LFE (lowfrequency effect) channel included in Dolby Digital and DTS software. The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce wall reflections. CONNECTIONS ■ Connecting to the FRONT A SPEAKERS terminals Connecting speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. 2 1 Red: positive (+) Black: negative (–) 3 CAUTION (U.S.A. and Canada models only) If you are to use 6 ohm speakers, be sure to set the IMPEDANCE SELECTOR switch on the rear panel to the upper position using a straight slot screwdriver. 1 Loosen the knob. 2 Insert the bare end of the speaker wire into the hole on the terminal. 3 Tighten the knob to secure the wire. Connecting the banana plug (except U.K., Europe, Korea and Asia models) The banana plug is a single-pole electrical connector widely used to terminate speaker cables. First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal. Banana plug Switch position Speaker Upper FRONT A or B CENTER SURROUND The impedance of each speaker must be 6 Ω or higher. Lower FRONT A or B CENTER SURROUND The impedance of each speaker must be 8 Ω or higher. Impedance level ■ Connecting to the FRONT B, CENTER, and SURROUND SPEAKERS terminals ■ Before connecting to the SPEAKERS terminal A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps with a stripe, groove or ridges. Connect the striped (grooved, etc.) cable to the “+” (red) terminals of this unit and your speaker. Connect the plain cable to the “–” (black) terminals. Remove approximately 10 mm (3/8”) of insulation from the end of each speaker cable and then twist the bare wires of the cable together to prevent short circuits. 10 mm (3/8”) 3 1 Red: positive (+) Black: negative (–) 2 1 Press down the tab. 2 Insert the bare end of the speaker wire into the hole on the terminal. 3 Release the tab to secure the wire. 11 PREPARATION • Use speakers with the specified impedance shown on the rear panel of this unit. • Before connecting the speakers, make sure that this unit is turned off. • Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and/or speakers. • Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the speakers away from the monitor. CONNECTIONS Front speakers (A) Right Left Surround speakers Right Left XM MULTI CH INPUT AUDIO R VIDEO L TUNER COMPONENT VIDEO Y PB 2 1 5 4 IMPEDANCE SELECTOR PR DVD DIGITAL INPUT DVD 3 FRONT DVD SURROUND DTV/ CBL A AM ANT DTV/ CBL B GND CENTER SUB WOOFER VCR FM ANT C V-AUX SPEAKERS COAXIAL OPTICAL DTV-CBL CD 2 1 R OUT R A FRONT L B MONITOR OUT VCR IN (PLAY) DVD CLASS 2 WIRING IN FRONT SURROUND CENTER R L L MD/ CD-R OUT (REC) SUB WOOFER R MONITOR OUT L AUDIO OUTPUT (U.S.A. model) 6 Subwoofer 3 1 Center speaker 2 Right Left Front speakers (B) ■ FRONT terminals Connect one or two speaker systems (1, 2) to these terminals. If you use only one front speaker system, connect it to the FRONT A terminals. 1 ■ CENTER terminals 6 Connect a center speaker (3) to these terminals. ■ SURROUND terminals Connect surround speakers (4, 5) to these terminals. ■ SUBWOOFER OUTPUT jack 2 3 5 Connect a subwoofer with built-in amplifier (6) (such as the YAMAHA Active Servo Processing Subwoofer System) to this jack. Speaker layout 12 4 CONNECTIONS Information on jacks and cable plugs Audio jacks and cable plugs DIGITAL AUDIO R COAXIAL OPTICAL (White) (Red) (Orange) L R C AUDIO Left and right Coaxial analog audio digital audio cable plugs cable plug COMPONENT VIDEO Y PB PR VIDEO (Yellow) (Green) (Blue) (Red) O V Y PB PR Optical digital audio cable plug Composite video cable plug PREPARATION DIGITAL AUDIO L Video jacks and cable plugs Component video cable plugs ■ Audio jacks ■ Video jacks This unit has three types of audio jacks (analog audio, digital audio coaxial, and digital audio optical). Connection depends on the availability of audio jacks on your other components. This unit has two types of video jacks (composite video, and component video). Connection depends on the availability of input jacks on your video monitor. AUDIO jacks For conventional analog audio signals transmitted via left and right analog audio cables. Connect red plugs to the right jacks and white plugs to the left jacks. DIGITAL AUDIO COAXIAL jacks For digital audio signals transmitted via coaxial digital audio cables. DIGITAL AUDIO OPTICAL jacks For digital audio signals transmitted via optical digital audio cables. Notes • You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the signals input at the COAXIAL jack. All digital input jacks are compatible with 96-kHz sampling digital signals. • This unit handles digital and analog signals independently. Thus audio signals input at the analog jacks are output only at the analog AUDIO OUT (REC) jacks. • Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical jack, be sure to put the cap back in place. This cap protects the jack from dust. VIDEO jacks For conventional composite video signals transmitted via composite video cables. COMPONENT VIDEO jacks For component signals, separated into the luminance (Y) and chrominance (PB, PR) video signals transmitted on separate wires of component video cables. Video signal flow for MONITOR OUT Input Output (MONITOR OUT) COMPONENT VIDEO VIDEO 13 CONNECTIONS ■ Connecting a DVD recorder/VCR Connecting video components Connect the audio signal input jacks of your video component to the VCR AUDIO OUT jacks of this unit. Then connect the video signal input jack of the video component to the VCR VIDEO OUT jack of this unit for picture recording. Connect the audio signal output jacks of your component to the VCR AUDIO IN jacks of this unit. Then connect the video signal output jack of the component to the VCR VIDEO IN jack of this unit to play a source from your recording component. ■ Connecting a video monitor Connect the video input jack of your video monitor to the MONITOR OUT jack. ■ Connecting a DVD player/cable TV/ satellite tuner Connect the coaxial digital audio signal output jack of your DVD player to the DIGITAL INPUT DVD COAXIAL jack and connect the video signal output jack of the component to the DVD VIDEO jack of this unit. Connect the optical digital audio signal output jack of your cable TV or satellite tuner to the DIGITAL INPUT DTV/CBL jack and connect the video signal output jack of the component to the DTV/CBL VIDEO jack of this unit. Notes • Once you have connected a recording component to this unit, keep the component turned on while using this unit. If the power is turned off, this unit may distort the sound from other components. • Be sure to connect your video source components in the same way you connect your video monitor to this unit. For example, if you connect your video monitor to this unit using a VIDEO connection, connect your video source components to this unit using the VIDEO connections. y • Use the AUDIO jacks of this unit for a video component which does not have optical digital output jack. To enjoy the surround sound, use the sound field program selector buttons on the remote control (see page 30). • If your DVD player does not have a coaxial digital output jack but has an optical cable, connect the jack to the DIGITAL INPUT DVD OPTICAL. • You can also connect a video monitor, DVD player, digital TV, and cable TV to this unit using the COMPONENT VIDEO connections (see page 16). DVD player Audio out C O XM Connect the video signal output jack of your component to the V-AUX VIDEO jack of this unit. Connect the audio signal output jacks of the component to the V-AUX AUDIO jacks of this unit. Video out Audio out Audio out ■ Connecting another video component L MULTI CH INPUT V R AUDIO R VIDEO L COMPONEN Y P DVD DIGITAL INPUT DVD 3 COAXIAL OPTICAL DTV/CBL FRONT DVD SURROUND DTV/ CBL C V-AUX IN MONITOR OUT VCR IN (PLAY) R OUT SURR Video in MD/ CD-R OUT (REC) SUB WOOFER R V MONITOR OUT L AUDIO 14 B VCR CD 1 DTV/ CBL CENTER SUB WOOFER 2 DVD A OUTPUT Video monitor CONNECTIONS Audio out Cable TV or Satellite tuner O Video out Audio out V XM MULTI CH INPUT AUDIO R VIDEO L L R COMPONEN Y P DVD 3 DVD COAXIAL OPTICAL DTV/CBL DVD SURROUND DTV/ CBL B VCR C V-AUX IN CD MONITOR OUT VCR IN (PLAY) 1 DTV/ CBL CENTER SUB WOOFER 2 DVD A PREPARATION DIGITAL INPUT FRONT R OUT SURR MD/ CD-R OUT (REC) SUB WOOFER R MONITOR OUT L AUDIO OUTPUT L R L Audio out V R Audio in V Video in Video out DVD recorder or VCR Another video component Video out Audio out V XM MULTI CH INPUT AUDIO R VIDEO L L R COMPONEN Y P DVD DIGITAL INPUT DVD 3 COAXIAL OPTICAL DTV/CBL FRONT DVD SURROUND DTV/ CBL B VCR C V-AUX IN CD MONITOR OUT VCR IN (PLAY) 1 DTV/ CBL CENTER SUB WOOFER 2 DVD A R OUT SURR MD/ CD-R OUT (REC) SUB WOOFER R MONITOR OUT L AUDIO OUTPUT 15 CONNECTIONS ■ Connecting to the COMPONENT VIDEO jacks You can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using COMPONENT VIDEO connections. Note Be sure to connect your video source components in the same way you connect your video monitor to this unit. For example, if you connect your video monitor to this unit using a COMPONENT VIDEO connection, connect your video source components to this unit using the COMPONENT VIDEO connection. DVD player Y Video out PB COMPONENT VIDEO Y PB PR PR DVD Cable TV or satellite tuner A DTV/ CBL Y B Video out PB VCR C PR R DVD recorder or VCR Y MONITOR OUT SURROUND L Video out PB PR Video monitor Y Video in PB PR ■ Connecting to the MULTI CH INPUT jacks This unit is equipped with 6 additional input jacks (FRONT L/R, CENTER, SURROUND L/R and SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder or sound processor. Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right output jacks to the left and right input jacks for the front and surround channels. XM AUDIO MULTI CH INPUT R DVD DTV/ CBL SURROUND DIGITAL INPUT DVD COAXIAL 3 SUB WOOFER VIDE L FRONT CENTER V-AUX IN CD R Center out R L L Surround out Subwoofer out Front out Multi-format player or external decoder Notes • When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 25), this unit automatically turns off the digital sound field processor, and you cannot select sound field programs. • This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that you connect a 5.1-channel speaker system before using this feature. • When headphones are used, signals are output only from the front left and right channels. 16 CONNECTIONS ■ Connecting a CD recorder/MD recorder Connecting audio components Connect the output jacks of your CD player to the CD jacks of this unit. Connect the input jacks of your CD recorder or MD recorder to the MD/CD-R OUT (REC) jacks. Connect the output jacks of your CD recorder or MD recorder to the MD/CD-R IN (PLAY) jacks to play a source from your recording component. y Note ■ Connecting a CD player To make a digital connection to a CD player, select the corresponding setting for DIGITAL INPUT jacks in “INPUT ASSIGN” (see page 55). Once you have connected a recording component to this unit, keep the component turned on while using this unit. If the component is turned off, this unit may distort the sound from other components. MULTI CH INPUT CD player PREPARATION XM Audio out AUDIO R L FRONT DVD L DTV/ CBL SURROUND R DIGITAL INPUT DVD 3 CENTER SUB WOOFER V-AUX Audio out L COAXIAL OPTICAL DTV-CBL 1 Audio in L VCR IN (PLAY) DVD CD recorder or MD recorder IN CD 2 R OUT MD/ CD-R OUT (REC) SUB WOOFER R L AUDIO OUTPUT R 17 CONNECTIONS Connecting the FM and AM antennas Both FM and AM indoor antennas are supplied with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals. ■ Connecting the AM loop antenna 1 Set up the AM loop antenna. 2 Press down the tab of the AM ANT terminal. 3 Insert the one of the AM loop antenna lead wires into the AM ANT terminal. 4 Release the tab back to secure the wire. 5 Repeat steps 2 through 4 to connect the other lead wire to the GND terminal. Once you have properly connected the AM loop antenna to this unit, orient the AM loop antenna for the best reception when you tune into AM stations. Notes • The AM loop antenna should be placed away from this unit. • A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized YAMAHA dealer or service center about outdoor antennas. • The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit. Outdoor AM antenna AM loop Indoor FM antenna antenna (supplied) (supplied) Use a 5 to 10 m (16 to 32 ft) of vinyl-covered wire extended outdoors from a window. TUNER AM ANT GND FM ANT Ground For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth. 18 CONNECTIONS Connecting the power cable Once all connections are complete, plug the power cable into the AC wall outlet. Power cable Turning on the power When all connections are complete, turn on this unit. STANDBY/ON VOLUME IMPEDANCE SELECTOR STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM XM A/B/C/D/E STRAIGHT SPEAKERS A/B/OFF l PRESET/TUNING/CH h h PROGRAM TUNING MODE DISPLAY MAN'L/AUTO FM SET MENU NEXT l MEMORY CATEGORY EDIT PHONES l INPUT MODE INPUT AUTO/MAN'L h MULTI CH INPUT EFFECT BASS/TREBLE TONE CONTROL PREPARATION SILENT CINEMA STANDBY POWER MD/CD-R TUNER SLEEP DTV/CBL VCR POWER POWER TV AV CD DVD POWER V-AUX MULTI CH IN REC AUDIO DISC SKIP CODE SET AMP TV + + + (U.S.A. model) CAUTION IMPEDANCE SELECTOR (U.S.A. and Canada models only) Before connecting the power cable into the AC wall outlet, check that the impedance selector setting is correct. VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local voltage BEFORE plugging the power cable into the AC wall outlet. Improper setting of the VOLTAGE SELECTOR may cause damage to this unit and create a potential fire hazard. Select the switch position (upper or lower) according to your local voltage using a straight slot screwdriver. Voltages are 110-120/220-240 V AC, 50/60 Hz. VOLTAGE SELECTOR Press STANDBY/ON on the front panel (or POWER on the remote control) to turn on this unit. POWER STANDBY /ON Front panel or Remote control Press STANDBY/ON on the front panel again (or press STANDBY on the remote control) to set this unit to the standby mode. Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However, the stored data will be lost in case the power cable is disconnected from the AC wall outlet or if the power supply is cut off for more than one week. 110V-120V 220V-240V 19 SETUP SETUP The “BASIC MENU” feature is a useful way to set up your system quickly and with minimal effort. 3 Press i to enter “1 SETUP”. y • If you wish to configure this unit manually using more precise adjustments, use the detailed parameters in “SOUND MENU” (see page 53). • Altering any parameters in “SETUP” resets all parameters manually adjusted in “SOUND MENU” (see page 53). • Initial settings are indicated in bold under each parameter. Using BASIC MENU – A-E/CAT. PRESET/CH “ROOM” appears in the front panel display. 4 Press j / i to select the desired setting. Note – Before you begin: • Press SPEAKERS on the front panel repeatedly (or press SPEAKERS A/B on the remote control) to select the front speakers you want to use. • Make sure you disconnect your headphones from this unit. AMP TV + VOL + + CH VOLUME – – MUTE INPUT PRESET/CH Select the size of the room where you have installed your speakers. In general, the room sizes are defined as follows: Choices: S, M, L [U.S.A. and Canada models] S (small) 16 x 13 ft, 200 ft2 (4.8 x 4.0 m, 20 m2) M (medium) 20 x 16 ft, 300 ft2 (6.3 x 5.0 m, 30 m2) L (large) 26 x 19 ft, 450 ft2 (7.9 x 5.8 m, 45 m2) [Other models] S (small) 3.6 x 2.8 m, 10 m2 M (medium) 4.8 x 4.0 m, 20 m2 L (large) 6.3 x 5.0 m, 30 m2 1 – MUSIC 1 2 STANDARD 5 ENTERTAIN MOVIE 3 4 5CH STEREO 6 A SPEAKERS B 9 7 8 NIGHT STRAIGHT +10 ENT. 0 LEVEL SET MENU TITLE MENU BAND – SRCH MODE + ENTER TEST DISPLAY PRESET/CH (U.S.A. model) 1 1 5-7,9,11,13-15 A-E/CAT. RETURN MEMORY 2-6,8,10,12,13 + ENTER A-E/CAT. MUTE 2CH STEREO + ENTER 5 Press d to enter “SUBWOOFER” and then press j / i to select the desired setting. Press AMP and then SET MENU. – AMP MENU + ENTER – PRESET/CH + ENTER A-E/CAT. A-E/CAT. SET MENU PRESET/CH SRCH MODE “BASIC MENU” appears in the front panel display. If the front panel display shows anything other than “BASIC MENU”, press SET MENU repeatedly until “BASIC MENU” appears. 2 Press i to enter “BASIC MENU”. – + ENTER A-E/CAT. PRESET/CH “1 SETUP” appears in the front panel display. 20 Choices: YES, NONE • Select “YES” if you have a subwoofer in your system. • Select “NONE” if you do not have a subwoofer in your system. SETUP 6 Press d to confirm your selection and then press j / i to select the number of speakers connected to this unit. 9 Press d to confirm your selection. – + ENTER A-E/CAT. – – + ENTER + ENTER A-E/CAT. PRESET/CH A-E/CAT. PRESET/CH Choice Display 2spk L C R SL SB SR Speakers Front L/R y The indicator of the speaker currently outputting the test tone flashes in the front panel display. 3spk 4spk L C R SL SB SR Front L/R, Center L C R SL SB SR Front L/R, Surround L/R 10 Press j / i to select the desired setting. – + ENTER A-E/CAT. PRESET/CH 5spk 7 L C R SL SB SR Front L/R, Center, Surround L/R Choices: YES, NO • Select “YES” to complete the setup procedure if the test tone levels from each speaker were satisfactory. • Select “NO” to proceed to the speaker level adjustment menu to balance the output level of each speaker. Press d to confirm your selection. – + ENTER A-E/CAT. 11 PRESET/CH “iSET CANCEL” appears in front panel display. Press d to confirm your selection. – + ENTER A-E/CAT. 8 Press j / i to select the desired setting. – + ENTER A-E/CAT. PRESET/CH PRESET/CH • If you selected “YES” in the previous step, the setup procedure is completed and the display returns to the “BASIC MENU”. • If you selected “NO” in the previous step, the speaker level adjustment display appears in the front panel display. Choices: SET, CANCEL • Select “SET” to apply the settings you made. • Select “CANCEL” to cancel the setup procedure without making any changes. y You can also press SET MENU repeatedly to cancel the setup procedure. 21 PREPARATION If you selected “SET” in the previous step, you will hear a test tone from each speaker in turn. “CHECK:TestTone” appears in the front panel display for a few seconds and then “CHECK OK?” appears in the front panel display. PRESET/CH SETUP 12 Press j / i to adjust the balance between the front left and right speakers. – + ENTER A-E/CAT. PRESET/CH 13 Press d / u to select a speaker and then j / i to adjust the balance. Press i to increase the value. Press j to decrease the value. – – + ENTER + ENTER A-E/CAT. A-E/CAT. PRESET/CH PRESET/CH • Select “C” to adjust the balance between the front left and center speakers. • Select “SL” to adjust the balance between the front left and surround left speakers. • Select “SR” to adjust the balance between the surround left and surround right speakers. • Select “SWFR” to adjust the balance between the front left speaker and the subwoofer. 14 To confirm the settings, press d / u repeatedly until “2 SP LEVEL” appears in the front panel display. – + ENTER A-E/CAT. PRESET/CH 15 Press d repeatedly until the menu disappears. – + ENTER A-E/CAT. PRESET/CH 22 PLAYBACK PLAYBACK CAUTION Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS. Basic operations 3 VOLUME Press INPUT l / h on the front panel repeatedly (or press one of the input selector buttons on the remote control) to select the desired input source. STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM SPEAKERS A/B/OFF l PRESET/TUNING/CH h A/B/C/D/E XM PROGRAM TUNING MODE DISPLAY MAN'L/AUTO FM SET MENU NEXT l STRAIGHT MEMORY CATEGORY EDIT PHONES h l INPUT INPUT MODE AUTO/MAN'L h INPUT MULTI CH INPUT EFFECT TONE CONTROL or 6 6 7 3 CD MD/CD-R TUNER SLEEP DVD DTV/CBL VCR V-AUX 5 Front panel VCR V-AUX Remote control The name of the currently selected input source appears in the front panel display for a few seconds. 3 MULTI CH IN REC AUDIO DISC SKIP Selected input source CODE SET 2 5 AMP TV + + + VOL CH VOLUME – – – MUTE INPUT 2CH STEREO MUSIC ENTERTAIN MOVIE 1 2 3 4 VCR STANDARD 5 6 A SPEAKERS B 9 7 5CH STEREO 0 7 8 NIGHT STRAIGHT +10 ENT. LEVEL V-AUX DVD MUTE 2 MD/CD-R DTV/CBL Selected input source DTV/CBL DVD MD/CD-R TUNER CD AUTO Input mode SET MENU Note 1 Turn on the video monitor connected to this unit. 2 Press SPEAKERS on the front panel repeatedly (or press AMP and then SPEAKERS A/B on the remote control) to select the front speakers you want to use. The respective speaker indicators lights up in the front panel display. If you are to select an input source connected via digital connections, set “INPUT MODE” to “AUTO” or “DTS” (see page 26). 4 SPEAKERS A/B/OFF AMP or Front panel A SPEAKERS B 9 0 Start playback on the selected component or select a broadcast station. • When a multi-channel signal (Dolby Digital or DTS) is input digitally, this unit decodes the signal and reproduces surround sound. • Refer to the operating instructions for the source component. • See page 35 for details about FM/AM tuning instructions. • See page 41 for details about XM Satellite Radio tuning instructions. Remote control 23 BASIC OPERATION 2 CD DVD BASS/TREBLE SILENT CINEMA PLAYBACK 5 Rotate VOLUME on the front panel (or press VOLUME +/– on the remote control) to adjust the volume to the desired output level. VOLUME + or VOLUME – 7 Press PROGRAM l / h on the front panel repeatedly (or press one of the sound field program selector buttons on the remote control repeatedly) to select the desired sound field program. The name of the selected sound field program appears in the front panel display. See page 31 for details about sound field programs. l Note Front panel If you connected a recording component to the VCR OUT, or MD/CD-R OUT (REC) jacks, and you notice distortion or low volume during playback from other components, try turning on the recording component. or 2CH STEREO MUSIC 1 2 STANDARD 6 5 Press TONE CONTROL on the front panel repeatedly to select “BASS” or “TREBLE” and then press BASS/TREBLE +/– to adjust the corresponding frequency response level. TONE CONTROL h PROGRAM 3 MOVIE 4 5CH STEREO 6 A SPEAKERS B 9 ENTERTAIN 0 7 8 NIGHT STRAIGHT +10 ENT. Remote control BASS/TREBLE • Select “BASS” to adjust the low-frequency response. • Select “TREBLE” to adjust the high-frequency response. The Roxy Thtr Currently selected surround field program Notes • Speaker and headphone adjustments are stored independently. • When “TONE BYPASS” (see page 55) is set to “AUTO”, and “BASS” and “TREBLE” are set to 0 dB, audio output automatically bypasses the tone control circuitry of this unit. • If you increase or decrease the high-frequency or lowfrequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers. • TONE CONTROL is not effective when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 25). 24 Notes • Choose a sound field program based on your listening preference, not merely on the name of the program. • When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source. • Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 25). • When sampling frequencies higher than 48 kHz are input, this unit is automatically set to the “STEREO” mode. • To display information about the currently selected input source in the front panel display, see page 28 for details. PLAYBACK Additional operations ■ Listening with headphones using SILENT CINEMA SILENT CINEMA allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS sources, through ordinary headphones. SILENT CINEMA activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs (see page 31). When activated, the SILENT CINEMA indicator lights up in the front panel display. ■ Selecting the MULTI CH INPUT component as the input source Use this feature to select the component connected to the MULTI CH INPUT jacks (see page 16) as the input source. Press MULTI CH INPUT on the front panel (or MULTI CH IN on the remote control) so that “MULTI CH INPUT” appears in the front panel display. MULTI CH INPUT Notes Front panel ■ Muting the audio output Press MUTE on the remote control to mute the audio output. Press MUTE again to resume the audio output. MUTE Note When “MULTI CH INPUT” is shown in the front panel display, no other source can be played. To select another input source with INPUT l / h on the front panel (or one of the input selector buttons on the remote control), press MULTI CH INPUT (or MULTI CH IN on the remote control) so that “MULTI CH INPUT” disappears from the front panel display. ■ Using the night listening mode The night listening mode is designed to improve listenability at lower volumes or at night. Press AMP on the remote control and then press NIGHT to select “NIGHT ON”. y • You can also rotate VOLUME on the front panel or VOLUME +/– on the remote control to resume the audio output. • You can adjust the muting level by using “AUDIO MUTE” in “OPTION MENU” (see page 56). • The MUTE indicator flashes in the front panel display when the audio output is muted and disappears from the front panel display when the audio output is resumed. Note If you change the input source or the sound field program while the audio output is being muted, this unit resumes the audio output. Remote control AMP NIGHT +10 y When a night listening mode is selected, the NIGHT indicator lights up in the front panel display. Notes • You can use the night listening mode with any of the sound field programs. • The night listening mode may vary in effectiveness depending on the input source and the surround sound settings you use. 25 BASIC OPERATION • SILENT CINEMA does not activate when the component connected to the MULTI CH INPUT jacks is selected as the input source. • SILENT CINEMA is not effective when “2CH STEREO” (see page 31) is selected or when this unit is in the “STRAIGHT” mode (see page 33). • The sound from the LFE channel will be mixed and output from the headphones. MULTI CH IN or PLAYBACK ■ Selecting the input modes This unit comes with a variety of input jacks. Do the following to select the type of input signals you want to use. y • We recommend setting “INPUT MODE” to “AUTO” in most cases. • You can adjust the default input mode of this unit by using the “INPUT MODE” parameter in “INPUT MENU” (see page 55). ■ Adjusting speaker levels during playback You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks. 1 Press AMP on the remote control and then press LEVEL repeatedly to select the speaker you want to adjust. Notes AMP • To play DTS-encoded CDs when using a digital audio connection, be sure to set “INPUT MODE” to “DTS”. • Depending on the player, DTS decoding may not be performed correctly even if you make a digital connection between this unit and the player. 1 TITLE BAND • Select “FRONT L” to adjust the front left speaker output level. • Select “CENTER” to adjust the center speaker output level. • Select “FRONT R” to adjust the front right speaker output level. • Select “SUR. R” to adjust the surround right speaker output level. • Select “SUR. L” to adjust the surround left speaker output level. • Select “SWFR” to adjust the subwoofer output level. Press INPUT l / h on the front panel to select the desired input source. INPUT 2 LEVEL Press INPUT MODE on the front panel repeatedly to select the desired input mode. y INPUT MODE Once you press LEVEL on the remote control, you can also select the speaker by pressing u / d. 2 Currently selected input sources VCR V-AUX DTV/CBL DVD MD/CD-R TUNER Press j / i on the remote control to adjust the speaker output level. CD – DVD Currently selected input source AUTO DTS ANALOG AUTO Currently selected input mode Automatically selects input signals in the following order: 1) Digital signals 2) Analog signals Selects only digital signals encoded in DTS. If no DTS signals are input, no sound is output. Selects only analog signals. If no analog signals are input, no sound is output. Note When “INPUT MODE” is set to “AUTO”, this unit automatically switches to the appropriate decoder if a Dolby Digital or DTS signal is detected. 26 + ENTER A-E/CAT. PRESET/CH The control range is from +10 dB to –10 dB for the center and surround speakers, and from 0 dB to –20 dB for the front speakers and subwoofer. Notes • This operation will override the level adjustments made in “SETUP” (see page 20). • You cannot adjust speaker levels if “SPEAKER SET” in “SOUND MENU” (see page 53) is set to “NONE”. • You cannot adjust the subwoofer level if “BASS” in “SPEAKER SET” (see page 53) in the set menu is set to “FRNT”. • If you use LEVEL to adjust speaker levels, the speaker levels you previously set with the test tone will also change. • If you select “SETUP” (see page 20) and then select “SET”, speaker levels change in response to any changes you make in “SETUP”. PLAYBACK ■ Using the test tone Use the test tone to set speaker levels so that the volume from each speaker is identical when heard from your listening position. This is also possible when playing sources input at the MULTI CH INPUT jacks. 1 Press AMP on the remote control and then press TEST. The unit will output a test tone. AMP TEST RETURN MEMORY 2 Press u / d repeatedly to select a speaker to adjust. – + ENTER Notes • You cannot use the test tone if headphones are connected to the PHONES jack. Remove the headphones from the PHONES jack. • This operation will override the level adjustments made in “SETUP” (see page 20). • You cannot adjust speaker levels if “SPEAKER SET” in “SOUND MENU” (see page 53) is set to “NONE”. • You cannot adjust the subwoofer level if “BASS” in “SPEAKER SET” (see page 53) in the set menu is set to “FRNT”. • If you use TEST to adjust speaker levels, the speaker levels you previously adjust during playback will also change. • If you select “SETUP” (see page 20) and then select “SET”, speaker levels change in response to any changes you make in “SETUP”. y Depending on the source, the speaker levels set with the test tone may not be to your liking. In this case, adjust the speaker levels while listening to the source. A-E/CAT. BASIC OPERATION PRESET/CH • Select “TEST LEFT” to adjust the front left speaker output level. • Select “TEST CENTER” to adjust the center speaker output level. • Select “TEST RIGHT” to adjust the front right speaker output level. • Select “TEST SUR.R” to adjust the surround right speaker output level. • Select “TEST SUR.L” to adjust the surround left speaker output level. • Select “TEST SUBWOOFER” to adjust the subwoofer output level. 3 Press j / i on the remote control to adjust the speaker output level. – + ENTER A-E/CAT. PRESET/CH The control range is from +10 dB to –10 dB for the center and surround speakers, and from 0 dB to –20 dB for the front speakers and subwoofer. 4 Press TEST on the remote control when you have completed your adjustment. The test tone halts. TEST RETURN MEMORY 27 PLAYBACK ■ Displaying information about the input source FORMAT Signal format display. When this unit cannot detect a digital signal, it automatically switches to analog input. Display status: Analog, Digital, Dolby Digital, DTS, PCM, Unknown Digital You can display the format, sampling frequency, channel and bit rate of the current input signal. 1 2 Press one of the input selector buttons on the remote control to select the desired input source. Note “Unknown Digital” appears when this unit detects any undecodable digital signal. Press AMP on the remote control and then press STRAIGHT to select “STRAIGHT”. CHANNEL Number of source channels in the input signal (front/ surround/LFE). For example, a multi-channel soundtrack with 3 front channels, 2 surround channels and LFE, is displayed as “3/2/LFE”. STRAIGHT AMP ENT. 3 Press u / d to display the following information about the input source. – PRESET/CH BITRATE Bit rate. + ENTER A-E/CAT. 28 SAMPLING Sampling frequency. Display status: 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz, 96kHz y When you are displaying information about the input source, this unit is in the “STRAIGHT” mode (see page 33). To turn back the sound field program on, press STRAIGHT again. PLAYBACK ■ Using the sleep timer Use this feature to automatically set this unit to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. Press SLEEP on the remote control repeatedly to set the amount of time. Each time you press SLEEP, the front panel display changes as shown below. ■ Playing video sources in the background You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor. Press the input selector buttons on the remote control to select a video source and then an audio source. SLEEP SLEEP 120min SLEEP OFF SLEEP 90min SLEEP 30min SLEEP 60min MD/CD-R TUNER DVD DTV/CBL VCR Audio sources V-AUX Video sources Note If you want to enjoy an audio source input at the MULTI CH INPUT jacks together with a video source, first select the video source and then press MULTI CH INPUT on the front panel (or MULTI CH IN on the remote control) to select the component connected to the MULTI CH INPUT jacks as the input source (see page 25). SLEEP SLEEP 120min Flashes SLEEP The Roxy Thtr Lights up To cancel the sleep timer, press SLEEP on the remote control repeatedly until “SLEEP OFF” appears in the front panel display. The SLEEP indicator turns off and “SLEEP OFF” disappears after a few seconds. y The sleep timer setting can also be canceled by pressing STANDBY/ON on the front panel (or STANDBY on the remote control) to set this unit to the standby mode. 29 BASIC OPERATION The SLEEP indicator flashes while you are switching the amount of time for the sleep timer. Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program. CD SOUND FIELD PROGRAMS SOUND FIELD PROGRAMS This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience. Notes • Choose a sound field program based on your listening preference, not merely on the name of the program. • When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source. • Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 25). • When sampling frequencies higher than 48 kHz are input, this unit is automatically set to the “STEREO” mode. ■ Front panel operations ■ Remote control operations (U.S.A. model) AMP AMP VOLUME TV + VOL STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM XM A/B/C/D/E PHONES SPEAKERS A/B/OFF l MEMORY SET MENU MAN'L/AUTO FM TUNING MODE PROGRAM + CH VOLUME – – MUTE INPUT 2CH STEREO MUSIC 1 2 – DISPLAY NEXT STRAIGHT l PRESET/TUNING/CH h CATEGORY EDIT + h l INPUT MUTE AUTO/MAN'L h INPUT MODE MULTI CH INPUT ENTERTAIN MOVIE 3 4 EFFECT TONE CONTROL BASS/TREBLE STANDARD 5 SILENT CINEMA 5CH STEREO 6 A SPEAKERS B 9 PROGRAM l / h Press PROGRAM l / h on the front panel repeatedly. The name of the selected sound field program appears in the front panel display. 30 0 7 8 NIGHT STRAIGHT +10 ENT. Sound field program selector buttons (U.S.A. model) Press AMP on the remote control and then press one of the sound field program selector buttons repeatedly. The name of the selected sound field program appears in the front panel display. SOUND FIELD PROGRAMS Sound field program descriptions Remote control button 2CH STEREO MUSIC Program Features 2CH STEREO Downmixes multi-channel sources to 2 channel or plays back 2-channel sources as they are. Concert Hall HiFi DSP processing. This program produces the excitement of a live concert hall. The Roxy Thtr HiFi DSP processing. The program reproduces the dynamic rock music environment of “The Roxy Theatre”, one of the hottest rock clubs in L.A. The listener’s virtual seat is at the center-left of the hall. Game CINEMA DSP processing. This program adds the dynamics and thrills of the threedimensional surround sound effect. TV Sports CINEMA DSP processing. This program enhances the experience of watching sports by producing the ambient sounds of the crowd and the stadium. Movie Spacious CINEMA DSP processing. This program offers clear dialog with a wide sound field for movie scenes. It is ideal for any type of movie, live music and game contents. Movie Dramatic CINEMA DSP processing. This program creates a live sound field by emphasizing the dramatic scene changes of action movies and games. STANDARD Standard processing for the selected decoder. 5CH STEREO Using this program increases the listening position range. This is a sound field suitable for background music at parties. ENTERTAIN MOVIE 5CH STEREO y The sound field programs are compatible with all Dolby Digital, DTS, and Dolby Surround sources. Set “INPUT MODE” to “AUTO” (see page 26) to enable this unit to automatically switch to the appropriate digital decoder according to the input signal. Notes • The sound field programs of this unit are recreations of real-world acoustic environments made from precise measurements taken in the actual concert hall, music venue, movie theater, etc. Thus, you may notice variations in the strength of the reflections coming from the front, back, left and right. • Choose a sound field program based on your listening preference, not merely on the name of the program itself. 31 BASIC OPERATION STANDARD SOUND FIELD PROGRAMS ■ Enjoying 2-channel sources using the standard decoders Signals input from 2-channel sources can also be played back on multi-channels. Press AMP on the remote control and then STANDARD on the remote control repeatedly to select a decoder. AMP ■ Editing sound fields parameters You can enjoy good quality sound with the factory preset parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room. 1 STANDARD While listening to a source, press AMP on the remote control and then press u / d to select the parameters. 5 You can select from the following decoders depending on the type of source you are playing and your personal preference. STANDARD Functions PRO LOGIC Dolby Pro Logic processing for any sources PLII Movie Dolby Pro Logic II processing for movie sources – A-E/CAT. PRESET/CH 2 Press j / i to change parameter value. – PLII Music Dolby Pro Logic II processing for music sources y You can also select a decoder by pressing j / i on the remote control while the decoder type is displayed in the front panel display. 32 + ENTER + ENTER A-E/CAT. PRESET/CH Note You cannot change parameter values when “MEM. GUARD” in “OPTION MENU” is set to “ON” (see page 56). SOUND FIELD PROGRAMS For 2CH STEREO: Direct DIRECT Function: 2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo sound when playing 2-channel analog sources. Choices: AUTO, OFF y • The “AUTO” setting bypasses the decoders and DSP processors only when “BASS” and “TREBLE” are set to 0 dB (see page 24). • When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2 channels and output from the front left and right speakers. • The low-frequency signals input from the front left and right speakers are redirected to the subwoofer in the following cases: – “BASS” is set to “BOTH” (see page 54). – “FRONT” is set to “SML” (see page 54) and “BASS” is set to “SWFR” (see page 54). For PRO LOGIC II Music: Dimension DIMENSION Function: Gradually adjusts the sound field either towards the front or towards the rear. Control range: –3 (towards the rear) to +3 (towards the front), initial setting is STD (standard). Center width CT WIDTH Function: Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the center image towards the front left and right speakers. Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only from front left and right speakers), initial setting is 3. Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers by creating virtual speakers. If you set “SURR” to “NONE” (see page 54), Virtual CINEMA DSP activates automatically whenever you select a CINEMA DSP program (see page 31). Note Virtual CINEMA DSP will not activate even when “SURR” is set to “NONE” (see page 54) in the following cases: – When “2CH STEREO” (see page 31) is selected or when this unit is in the “STRAIGHT” mode. – When the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 25). – When headphones are connected to the PHONES jack. ■ Listening to unprocessed input signals When this unit is in the “STRAIGHT” mode, multichannel sources are decoded straight into the appropriate channels without any additional effect processing. 2channel stereo sources are output from only the front left and right speakers. 1 Press AMP on the remote control and then STRAIGHT to select “STRAIGHT”. AMP STRAIGHT ENT. 2 To deactivate the “STRAIGHT” mode, press STRAIGHT on the remote control again so that “STRAIGHT” disappears from the front panel display. The sound field program is turned back on. y You can also select “STRAIGHT” by pressing STRAIGHT on the front panel. 33 BASIC OPERATION Panorama PANORAMA Function: Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect. Choices: OFF, ON ■ Using Virtual CINEMA DSP RECORDING RECORDING Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. Notes • When this unit is set to the standby mode, you cannot record between other components connected to this unit. • The settings of TONE CONTROL (see page 24), VOLUME, speaker levels (see page 26) and the sound field programs (see page 31) do not affect recorded material. • The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded. • Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Therefore, if your source component is connected to provide only digital signals, you cannot record the source. • A given input source is not output on the same OUT (REC) channel. • Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright laws. • The XM Satellite Radio signals cannot be output at the AUDIO OUT (REC) jacks. y Do a test recording before you start an actual recording. If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals. (U.S.A. model) 1 Turn on all the connected components. 2 Press INPUT l / h on the front panel repeatedly (or press one of the input selector buttons on the remote control) to select the source component you want to record from. VOLUME STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM XM EDIT PHONES SPEAKERS A/B/OFF STRAIGHT l PRESET/TUNING/CH h A/B/C/D/E DISPLAY PROGRAM MAN'L/AUTO FM SET MENU NEXT l TUNING MODE MEMORY CATEGORY h l INPUT INPUT MODE AUTO/MAN'L h MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA 2 INPUT or 2 POWER POWER TV AV STANDBY POWER CD MD/CD-R TUNER SLEEP DVD DTV/CBL VCR V-AUX Front panel CD MD/CD-R DVD DTV/CBL VCR V-AUX Remote control MULTI CH IN REC AUDIO (U.S.A. model) 34 3 Start playback on the selected source component or select a broadcast station. 4 Start recording on the recording component. FM/AM TUNING FM/AM TUNING There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use the automatic and manual preset tuning features to store up to 40 stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups). Furthermore, you can recall any preset stations and exchange the assignment of two preset stations with each other. Automatic tuning 3 Automatic tuning is effective when station signals are strong and there is no interference. Press TUNING MODE so that the AUTO indicator lights up in the front panel display. TUNING MODE DISPLAY AUTO/MAN'L (U.S.A. model) VOLUME Lights up STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM XM A/B/C/D/E SPEAKERS A/B/OFF STRAIGHT PROGRAM DISPLAY MAN'L/AUTO FM SET MENU NEXT l TUNING MODE MEMORY CATEGORY EDIT PHONES l PRESET/TUNING/CH h h l INPUT INPUT MODE AUTO/MAN'L AUTO h MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE 3 2 1 4 1 AM 1440 kHz BASIC OPERATION A SILENT CINEMA No colon (:) 3 If a colon (:) appears in the front panel display, automatic tuning is not possible. Press PRESET/ TUNING to turn the colon (:) off. Press INPUT l / h repeatedly so that “TUNER” is displayed in the front panel display. PRESET/TUNING SEARCH MODE EDIT INPUT 4 2 Press FM/AM to select the reception band (FM or AM). FM/AM Press PRESET/TUNING/CH l / h once to begin automatic tuning. When this unit is tuned into a station, the TUNED indicator lights up and the frequency of the received station is shown in the front panel display. • Press h to tune into a higher frequency. • Press l to tune into a lower frequency. XM l PRESET/TUNING/CH h SET MENU Lights up AUTO TUNED A AM 1530 kHz 35 FM/AM TUNING Manual tuning 3 If the signal received from the station you want to select is weak, tune into it manually. Press TUNING MODE so that the AUTO indicator disappears from the front panel display. TUNING MODE Note DISPLAY AUTO/MAN'L Manually tuning into an FM station automatically switches the tuner to monaural reception to increase the signal quality. (U.S.A. model) A VOLUME AM 1440 kHz STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM XM A/B/C/D/E SPEAKERS A/B/OFF STRAIGHT l PRESET/TUNING/CH h PROGRAM No colon (:) TUNING MODE DISPLAY MAN'L/AUTO FM SET MENU NEXT l MEMORY CATEGORY EDIT PHONES h l INPUT INPUT MODE AUTO/MAN'L h If a colon (:) appears in the front panel display, manual tuning is not possible. Press PRESET/ TUNING to turn the colon (:) off. MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA 3 2 4 1 3 PRESET/TUNING SEARCH MODE EDIT 1 Press INPUT l / h repeatedly so that “TUNER” is displayed in the front panel display. INPUT 4 Press PRESET/TUNING/CH l / h to tune into the desired station manually. • Press h to tune into a higher frequency. • Press l to tune into a lower frequency. • Hold down the button to continue searching. l PRESET/TUNING/CH h 2 SET MENU Press FM/AM to select the reception band (FM or AM). FM/AM XM 36 FM/AM TUNING Automatic preset tuning 3 You can use the automatic preset tuning feature to store FM stations with strong signals up to 40 (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) of those stations in order. You can then recall any preset station easily by selecting the preset station number. Press and hold MEMORY for more than 3 seconds. The preset station number as well as the MEMORY and AUTO indicators flashes. After approximately 5 seconds, automatic presetting starts from the current frequency and proceeds toward the higher frequencies. (U.S.A. model) MEMORY MAN'L/AUTO FM VOLUME STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM XM A/B/C/D/E SPEAKERS A/B/OFF STRAIGHT l PRESET/TUNING/CH h PROGRAM TUNING MODE DISPLAY MAN'L/AUTO FM SET MENU NEXT l MEMORY CATEGORY EDIT PHONES h l INPUT INPUT MODE Flash AUTO/MAN'L h MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA AUTO 2 1 MEMORY A1:FM 87.5 MHz 3 Flashes Press INPUT l / h repeatedly so that “TUNER” is displayed in the front panel display. INPUT 2 y You can select the preset station group and the preset station number where the first received station will be stored by pressing A/B/C/D/E on the front panel and then PRESET/TUNING/CH l / h. Notes Press FM/AM to select “FM” as the reception band. FM/AM XM • Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number. • If the number of received stations does not reach 40 (E8), automatic preset tuning automatically stops after searching for all the available stations. • Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune into it manually and store it as described in “Manual preset tuning” on page 38. 37 BASIC OPERATION 1 When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station. FM/AM TUNING Manual preset tuning 4 You can also store up to 40 stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) manually. Press PRESET/TUNING/CH l / h to select a preset station number (1 to 8) while the MEMORY indicator is flashing. • Press h to select a higher preset station number. • Press l to select a lower preset station number. (U.S.A. model) l PRESET/TUNING/CH h VOLUME SET MENU STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM XM A/B/C/D/E SPEAKERS A/B/OFF STRAIGHT PROGRAM TUNING MODE MEMORY DISPLAY NEXT l l PRESET/TUNING/CH h CATEGORY EDIT PHONES MAN'L/AUTO FM SET MENU h l INPUT AUTO/MAN'L Flashes h INPUT MODE MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA TUNED C3 : AM 3 4 2,5 MEMORY 630 kHz Preset station number 1 Tune into a station automatically or manually. See pages 35 and 36 for tuning instructions. 5 TUNED A 630 kHz AM Press MEMORY while the MEMORY indicator is flashing. The station band and frequency appear in the front panel display with the preset station group and number you have selected. When this unit is tuned into a station, the front panel display shows the frequency of the station received. MEMORY MAN'L/AUTO FM 2 Press MEMORY. The MEMORY indicator flashes in the front panel display for approximately 5 seconds. TUNED MEMORY MEMORY C3 : AM MAN'L/AUTO FM Flashes 3 Press A/B/C/D/E repeatedly to select a preset station group (A to E) while the MEMORY indicator is flashing. The preset station group letter appears. Check that the colon (:) appears in the front panel display. A/B/C/D/E CATEGORY NEXT Flashes TUNED C : AM Preset station Colon (:) group 38 MEMORY 630 kHz 630 kHz The displayed station has been stored as C3. 6 Repeat steps 1 through 5 to store other stations. Notes • Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number. • The reception mode (stereo or monaural) is stored along with the station frequency. FM/AM TUNING Selecting preset stations 2 You can tune into any desired station simply by selecting the preset station group and number under which it was stored. (U.S.A. model) Press PRESET/TUNING/CH l / h on the front panel (or PRESET/CH u / d on the remote control) to select the desired preset station number (1 to 8). The preset station group and number appear in the front panel display along with the station band and frequency. VOLUME STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM STRAIGHT SPEAKERS A/B/OFF l PRESET/TUNING/CH h A/B/C/D/E XM PROGRAM l PRESET/TUNING/CH h DISPLAY MAN'L/AUTO FM SET MENU NEXT l TUNING MODE MEMORY CATEGORY EDIT PHONES h l INPUT INPUT MODE or AUTO/MAN'L TONE CONTROL – + ENTER h MULTI CH INPUT SET MENU EFFECT A-E/CAT. BASS/TREBLE SILENT CINEMA PRESET/CH Front panel Remote control 1 2 2CH STEREO MUSIC 1 2 STANDARD 5 ENTERTAIN MOVIE 3 4 5CH STEREO 6 A SPEAKERS B 9 0 7 8 NIGHT STRAIGHT +10 ENT. LEVEL SET MENU TITLE MENU BAND SRCH MODE – + ENTER 2 E1 : FM 87.5 MHz A-E/CAT. DISPLAY PRESET/CH 1 y You can select the desired preset station number (1 to 8) directly by pressing the numeric buttons on the remote control. (U.S.A. model) y When performing this operation with the remote control, press TUNER to select “FM” or “AM” as the input source. 1 Press A/B/C/D/E on the front panel (or A-E/ CAT. j / i on the remote control) repeatedly to select the desired preset station group (A to E). The preset station group letter appears in the front panel display and changes each time you press the button. A/B/C/D/E or CATEGORY – + ENTER A-E/CAT. NEXT PRESET/CH Front panel Remote control 39 BASIC OPERATION TEST RETURN MEMORY FM/AM TUNING Exchanging preset stations 3 You can exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station “E1” with “A5”. Select preset station “A5” using A/B/C/D/E and PRESET/TUNING/CH l / h. “A5” and the MEMORY indicator flash in the front panel display. See “Selecting preset stations” on page 39. (U.S.A. model) l PRESET/TUNING/CH h A/B/C/D/E CATEGORY VOLUME SET MENU NEXT STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM XM A/B/C/D/E SPEAKERS A/B/OFF STRAIGHT l PRESET/TUNING/CH h PROGRAM TUNING MODE DISPLAY MAN'L/AUTO FM SET MENU NEXT l MEMORY CATEGORY EDIT PHONES h l INPUT MODE INPUT AUTO/MAN'L h MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA Flashes 2,4 3 3 MEMORY 1 Select preset station “E1” using A/B/C/D/E and PRESET/TUNING/CH l / h. See “Selecting preset stations” on page 39. 2 Press and hold PRESET/TUNING for more than 3 seconds. “E1” and the MEMORY indicator flash in the front panel display. A5 : FM 90.6 MHz Flashes 4 Press PRESET/TUNING again. “EDIT E1–A5” appears in the front panel display and the assignments of the two preset stations are exchanged. PRESET/TUNING SEARCH MODE EDIT PRESET/TUNING SEARCH MODE EDIT Flashes EDIT MEMORY E1 : FM 87.5 MHz Flashes 40 E1-A5 XM® SATELLITE RADIO TUNING XM® SATELLITE RADIO TUNING What is XM Satellite Radio? XM Satellite Radio is the satellite radio service with millions of listeners across the United States, broadcasting live daily. The XM Satellite Radio channel lineup includes more than 150 digital channels of choice from coast to coast: 67 commercial-free music channels, featuring hip hop to opera, classical to country, bluegrass to blues; 33 channels of premier sports, talk, comedy, children’s and entertainment programming; and more than 20 channels of the traffic and weather information for major metropolitan areas nationwide. Connecting the XM Connect-andPlay digital antenna Connect the XM Connect-and-Play digital antenna accessory (sold separately) to the XM jack on the rear panel of this unit. For details, see the operating instructions provided with the XM Connect-and-Play digital antenna. XM Connect-and-Play digital antenna XM BASIC OPERATION Because XM Satellite Radio is a subscription service, you will need to set up an account and activate service with XM using your XM Satellite Radio ID number. To check your ID number, follow “Activating XM Satellite Radio” on page 43. For further information on XM Satellite Radio services, visit the XM Satellite Radio website at “http://www.xmradio.com/”. MULTI CH INPUT FRONT Notes SURROUND DIGITAL INPUT • The XM Satellite Radio service is only available in the 48 contiguous United States (not available in Alaska and Hawaii). • XM Connect-and-Play digital antenna and monthly subscription are sold separately. For details, visit the XM Satellite Radio website at “http://www.xmradio.com/”. CD COAXIAL OPTICAL DTV/CBL CENTER CD 2 IN (PLAY) DVD 1 ■ Information from XM Satellite Radio Inc. Hardware and required basic monthly subscription sold separately. Premium Channel available at additional monthly cost. Installation costs and other fees and taxes, including a one-time activation fee may apply. Subscription fee is consumer only. All fees and programming subject to change. Channels with frequent explicit language are indicated with an “XL”. Channel blocking is available for XM radio receivers by calling “1-800-XM-RADIO (1-800-967-2346)”. Subscriptions subject to Customer Agreement available at xmradio.com. Only available in the 48 continuous United States. © 2005 XM Satellite Radio Inc. All rights reserved. All other trademarks are the property of their respective owners. 3 SUB WOOFER MD/ CD-R OUT (REC) R L AUDIO (U.S.A. model) Notes • For information on obtaining the XM Connect-and-Play digital antenna, visit the XM Satellite Radio website at “http://www.xmradio.com/” or consult your local retailer that sells XM Ready products. • To ensure the optimal reception of the XM Satellite Radio signals, the XM Connect-and-Play digital antenna must be placed at or near a southerly facing window with no obstacles in the path to the sky. You can mount it indoors or outdoors. 41 XM® SATELLITE RADIO TUNING XM Satellite Radio controls and functions Note The following controls are available only when “XM” is selected as the input source. Press INPUT l / h on the front panel repeatedly so that “TUNER” is displayed in the front panel display and then press XM on the front panel repeatedly (or press TUNER on the remote control and then press BAND repeatedly) to select “XM” as the input source. ■ Front panel functions ■ Remote control functions (U.S.A. model) PRESET/TUNING SEARCH MODE FM/AM XM A/B/C/D/E DISPLAY NEXT STRAIGHT PROGRAM TUNING MODE MEMORY CATEGORY EDIT l l PRESET/TUNING/CH h MAN'L/AUTO FM SET MENU h l INPUT INPUT MODE INPUT MUSIC ENTERTAIN 1 2 3 MUTE 1 STANDARD 5 9 h MULTI CH INPUT BASS/TREBLE 2 3 4 MOVIE 4 5CH STEREO 6 A SPEAKERS B AUTO/MAN'L EFFECT TONE CONTROL MUTE 2CH STEREO 0 7 8 NIGHT STRAIGHT +10 ENT. LEVEL SET MENU TITLE MENU BAND SRCH MODE – MEMORY + ENTER TEST A-E/CAT. DISPLAY RETURN 5 6 PRESET/CH 7 (U.S.A. model) 1 2 3 4 5 6 1 SEARCH MODE (PRESET/TUNING) Changes the search mode between the All Channel Search, Category Search, and Preset Search modes (see page 45). 1 Numeric buttons (All Channel Search or Category Search mode) Use 1 to 9 and 0 to enter a channel number directly. (Preset Search mode) Use 1 to 8 to enter a preset channel number directly. 2 XM (FM/AM) Switches the reception band to XM. 2 BAND Switches the reception band to XM. 3 CATEGORY (A/B/C/D/E) (All Channel Search mode) Changes the channel category while staying in the All Channel Search mode. (Category Search mode) Changes the channel category. (Preset Search mode) Changes the preset channel group (A to E). 3 A-E/CAT. j / i, PRESET/CH u / d (All Channel Search mode) Press A-E/CAT. j / i to change the channel category. Press PRESET/CH u / d to search for a channel within all channels. Press and hold for quick search. (Category Search mode) Press A-E/CAT. j / i to change the channel category. Press PRESET/CH u / d to search for a channel within the selected category. Press and hold for quick search. (Preset Search mode) Press A-E/CAT. j / i to change the preset channel group (A to E). Press PRESET/CH u / d to change the preset channel number (1 to 8). 4 PRESET/TUNING/CH l / h (All Channel Search mode) Searches for a channel within all channels. Press and hold for quick search. (Category Search mode) Searches for a channel within the selected category. Press and hold for quick search. (Preset Search mode) Changes the preset channel number (1 to 8). 5 MEMORY Stores a preset channel in the memory (see page 49). 6 DISPLAY (TUNING MODE) Switches the XM information such as channel number/name, category, artist name/song title in the front panel display (see page 50). 4 MEMORY Stores a preset channel in the memory (see page 49). 5 ENT. Confirms an entered channel number in the Direct Number Access mode (see page 48). 6 SRCH MODE Changes the search mode between the All Channel Search, Category Search, and Preset Search modes (see page 45). 7 DISPLAY Switches the XM information such as channel number/name, category, artist name/song title in the front panel display (see page 50). 42 XM® SATELLITE RADIO TUNING Activating XM Satellite Radio 2 To sign up for an account with the XM Satellite Radio service, an XM Satellite Radio ID number is required. Follow the procedure below to check your ID number, and then visit the website at “http://activate.xmradio.com/” or call “1-800-XM-RADIO (1-800-967-2346)” with a major credit card handy for signing up. y You can display the XM Satellite Radio reception level by using “XM ANT.” in “OPTION MENU” (see page 56). (U.S.A. model) Notes • If “CHECK ANTENNA” appears in the front panel display, the XM Connect-and-Play digital antenna may not be connected to the XM jack on the rear panel of this unit properly. See “Connecting the XM Connect-and-Play digital antenna” on page 41 and check the connection. • “XM ANT.” in “OPTION MENU” (see page 56) cannot be adjusted by using the remote control. Instead, you need to adjust the orientation of the XM Connect-and-Play digital antenna connected to the XM jack of this unit for a better percentage of the reception level. VOLUME STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM XM A/B/C/D/E SPEAKERS A/B/OFF STRAIGHT PROGRAM TUNING MODE MEMORY DISPLAY NEXT l l PRESET/TUNING/CH h CATEGORY EDIT PHONES MAN'L/AUTO FM SET MENU h l INPUT INPUT MODE AUTO/MAN'L h MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA 1 1 Press INPUT l / h on the front panel repeatedly so that “TUNER” is displayed in the front panel display and then press XM on the front panel repeatedly to select “XM” as the input source. 3 BASIC OPERATION 1 3 Check the XM Satellite Radio reception level and adjust the orientation of the XM Connectand-Play digital antenna for a better percentage of the reception level. Press PRESET/TUNING/CH l / h on the front panel to select channel “0”. l PRESET/TUNING/CH h SET MENU INPUT Note FM/AM XM You cannot select channel “0” if the All Channel Search mode (see page 45) is not selected. 4 Check the XM Satellite Radio ID number displayed in the front panel display and write it down. ID:_____________________________________ 43 XM® SATELLITE RADIO TUNING Basic XM Satellite Radio operations 1 (U.S.A. model) VOLUME STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM SPEAKERS A/B/OFF STRAIGHT l PRESET/TUNING/CH h A/B/C/D/E XM PROGRAM TUNING MODE DISPLAY MAN'L/AUTO FM SET MENU NEXT l MEMORY CATEGORY EDIT PHONES h l INPUT INPUT MODE AUTO/MAN'L h MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA 1 1 Press INPUT l / h on the front panel repeatedly so that “TUNER” is displayed in the front panel display and then press XM on the front panel repeatedly (or press TUNER on the remote control and then press BAND repeatedly) to select “XM” as the input source. The XM indicator lights up in the front panel display and the XM Satellite Radio information (such as channel number/name, category, artist name/song title) for the currently selected channel appears in the front panel display. INPUT CD MD/CD-R TUNER SLEEP DVD DTV/CBL VCR V-AUX FM/AM 1 XM MULTI CH IN REC AUDIO DISC SKIP Front panel CODE SET AMP or TV + + + VOL CH VOLUME – – MUTE INPUT – 2CH STEREO MUSIC 1 2 STANDARD 5 ENTERTAIN MOVIE 3 4 9 BAND 0 7 8 NIGHT STRAIGHT +10 LEVEL MENU BAND SRCH MODE y + ENTER TEST • When you select “XM” as the input source, this unit automatically recalls the previously selected channel. • You can change the kind of channel information by pressing DISPLAY on the remote control repeatedly (see page 50). A-E/CAT. DISPLAY RETURN MEMORY Remote control ENT. SET MENU TITLE – TITLE 5CH STEREO 6 A SPEAKERS B 1 LEVEL TUNER MUTE PRESET/CH (U.S.A. model) Note The XM Satellite Radio signals cannot be output at the AUDIO OUT (REC) jacks. 44 2 Search for a channel by using one of the XM Satellite Radio search modes. See “Selecting the XM Satellite Radio search mode” on page 45 for details. 3 Set XM Satellite Radio preset channels, if desired. See “Setting XM Satellite Radio preset channels” on page 49 for details. 4 Display the XM Satellite Radio information in the front panel display. See “Displaying the XM Satellite Radio information” on page 50 for details. XM® SATELLITE RADIO TUNING Selecting the XM Satellite Radio search mode 3 You can search for the desired channel using one of the three search modes (All Channel Search, Category Search, and Preset Search modes). You can also enter the channel number directly to select the desired channel by using the Direct Number Access mode (see page 48). A/B/C/D/E VOLUME STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM l PRESET/TUNING/CH h A/B/C/D/E XM PROGRAM TUNING MODE DISPLAY MAN'L/AUTO FM SET MENU NEXT l MEMORY CATEGORY EDIT STRAIGHT h l INPUT INPUT MODE + ENTER A-E/CAT. NEXT PRESET/CH Front panel (U.S.A. model) SPEAKERS A/B/OFF – or CATEGORY ■ All Channel Search mode PHONES Press CATEGORY on the front panel (or A-E/CAT. j / i on the remote control) repeatedly to change the channel category. 4 Remote control Press PRESET/TUNING/CH l / h on the front panel (or PRESET/CH u / d on the remote control) repeatedly to search for a channel within all channels. AUTO/MAN'L h MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA l PRESET/TUNING/CH h or – A-E/CAT. 3 2CH STEREO MUSIC 1 2 STANDARD 5 MOVIE 3 4 0 7 8 NIGHT STRAIGHT +10 ENT. SET MENU MENU TITLE SRCH MODE BAND – You can search for a channel quickly by pressing and holding PRESET/TUNING/CH l / h on the front panel (or PRESET/CH u / d on the remote control). A-E/CAT. DISPLAY RETURN MEMORY 2 + ENTER TEST Remote control y 5CH STEREO 6 LEVEL 4 Front panel ENTERTAIN A SPEAKERS B 9 PRESET/CH 4 3 PRESET/CH (U.S.A. model) 1 Select “XM” as the input source. See “Basic XM Satellite Radio operations” on page 44 for details. 2 Press SEARCH MODE on the front panel (or SRCH MODE on the remote control) repeatedly to select “ALL CH SEARCH”. PRESET/TUNING SET MENU or SEARCH MODE EDIT Front panel MENU SRCH MODE Remote control 45 BASIC OPERATION 2 + ENTER SET MENU XM® SATELLITE RADIO TUNING ■ Category Search mode (U.S.A. model) 3 VOLUME Press CATEGORY on the front panel (or A-E/CAT. j / i on the remote control) repeatedly to change the channel category. STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM l PRESET/TUNING/CH h A/B/C/D/E XM TUNING MODE MEMORY A/B/C/D/E DISPLAY CATEGORY EDIT MAN'L/AUTO FM SET MENU NEXT AUTO/MAN'L or CATEGORY PHONES STRAIGHT SPEAKERS A/B/OFF l PROGRAM h l INPUT INPUT MODE h TONE CONTROL – + ENTER MULTI CH INPUT NEXT EFFECT A-E/CAT. BASS/TREBLE SILENT CINEMA PRESET/CH Remote control Front panel 2 3 4 2CH STEREO MUSIC 1 2 STANDARD 5 MOVIE 3 4 5CH STEREO 6 A SPEAKERS B 9 7 8 NIGHT STRAIGHT +10 ENT. 0 LEVEL 4 4 ENTERTAIN SET MENU TITLE MENU BAND SRCH MODE – TEST A-E/CAT. DISPLAY RETURN MEMORY 2 + ENTER Press PRESET/TUNING/CH l / h on the front panel (or PRESET/CH u / d on the remote control) repeatedly to search for a channel within the selected channel category. 3 PRESET/CH (U.S.A. model) l PRESET/TUNING/CH h or – 1 2 Select “XM” as the input source. See “Basic XM Satellite Radio operations” on page 44 for details. Press SEARCH MODE on the front panel (or SRCH MODE on the remote control) repeatedly to select “CAT SEARCH”. SET MENU PRESET/TUNING or SEARCH MODE MENU EDIT SRCH MODE Front panel 46 Remote control + ENTER A-E/CAT. SET MENU PRESET/CH Front panel Remote control y You can search for a channel quickly by pressing and holding PRESET/TUNING/CH l / h on the front panel (or PRESET/CH u / d on the remote control). XM® SATELLITE RADIO TUNING ■ Preset Search mode Prior to selecting a preset channel in the Preset Search mode, you must preset XM Satellite Radio channels. For details, see “Setting XM Satellite Radio preset channels” on page 49. 3 Press CATEGORY on the front panel (or A-E/CAT. j / i on the remote control) repeatedly to change the preset channel group (A to E). y All preset channels (A1 to E8) recalls “001 Preview” by the initial factory setting. A/B/C/D/E or CATEGORY (U.S.A. model) – A-E/CAT. PRESET/CH VOLUME PRESET/TUNING FM/AM A/B/C/D/E XM STRAIGHT SPEAKERS A/B/OFF l PRESET/TUNING/CH h MEMORY SET MENU MAN'L/AUTO FM NEXT l PROGRAM TUNING MODE DISPLAY CATEGORY EDIT PHONES Remote control Front panel STANDBY /ON SEARCH MODE h l INPUT INPUT MODE AUTO/MAN'L h MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA 2 3 4 2CH STEREO MUSIC 1 2 STANDARD ENTERTAIN 3 A SPEAKERS B 9 4 0 4 l PRESET/TUNING/CH h 7 8 NIGHT STRAIGHT +10 ENT. LEVEL SET MENU TITLE MENU SRCH MODE BAND – 2 3 PRESET/CH Select “XM” as the input source. See “Basic XM Satellite Radio operations” on page 44 for details. 2 Press SEARCH MODE on the front panel (or SRCH MODE on the remote control) repeatedly to select “PRESET SEARCH”. Front panel Remote control You can also select the preset channel number directly by pressing the numeric buttons (1 to 8) on the remote control. SET MENU PRESET/TUNING or Front panel A-E/CAT. y 1 EDIT + ENTER PRESET/CH DISPLAY (U.S.A. model) SEARCH MODE – A-E/CAT. RETURN MEMORY or SET MENU + ENTER TEST Press PRESET/TUNING/CH l / h on the front panel (or PRESET/CH u / d on the remote control) repeatedly to change the preset channel number (1 to 8). MOVIE 5CH STEREO 6 4 MENU SRCH MODE Remote control 47 BASIC OPERATION 5 + ENTER NEXT XM® SATELLITE RADIO TUNING ■ Direct Number Access mode 3 CD MD/CD-R TUNER DVD DTV/CBL VCR SLEEP V-AUX 1 MULTI CH IN REC AUDIO DISC SKIP CODE SET AMP Press the numeric buttons on the remote control to enter the desired three-digit channel number. For example, to enter the number 123, press the numeric buttons as shown below. TV + VOL + + CH VOLUME – – MUTE INPUT – 2CH STEREO MUSIC ENTERTAIN 1 2 3 MUTE 2CH STEREO MUSIC ENTERTAIN MOVIE 1 2 3 4 STANDARD 5 5CH STEREO 6 A SPEAKERS B 9 7 8 NIGHT STRAIGHT 0 +10 LEVEL MENU TITLE BAND – SRCH MODE TEST 2 The display changes as follows. + ENTER A-E/CAT. DISPLAY RETURN MEMORY 3 ENT. SET MENU PRESET/CH (U.S.A. model) 1 Select “XM” as the input source. See “Basic XM Satellite Radio operations” on page 44 for details. 2 Press SRCH MODE on the remote control repeatedly to select “ALL CH SEARCH” or “CAT SEARCH”. <XM> --1 <XM> -12 SET MENU MENU <XM>123 SRCH MODE Press the numeric buttons and ENT. on the remote control to enter the desired one-digit or two-digit channel number. For example, to enter the number 12, press the numeric buttons as shown below. 2CH STEREO 1 MUSIC 2 STRAIGHT ENT. y • If no button is pressed within a few seconds after you enter a one-digit or two-digit number, this unit automatically confirms the entered channel number. • Pressing a button other than the numeric buttons or ENT. cancels the Direct Number Access mode procedure. 48 XM® SATELLITE RADIO TUNING Setting XM Satellite Radio preset channels 2 You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode” on page 47. Press MEMORY on the front panel (or MEMORY on the remote control). The MEMORY indicator flashes in the front panel display for approximately 5 seconds. MEMORY TEST or RETURN MEMORY MAN'L/AUTO FM Front panel Remote control (U.S.A. model) VOLUME MEMORY STANDBY /ON PRESET/TUNING SEARCH MODE FM/AM SPEAKERS A/B/OFF STRAIGHT l PRESET/TUNING/CH h A/B/C/D/E XM PROGRAM Flashes DISPLAY MAN'L/AUTO FM SET MENU NEXT l TUNING MODE MEMORY CATEGORY EDIT PHONES h l INPUT AUTO/MAN'L h INPUT MODE MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA Note 4 2,5 2CH STEREO MUSIC 1 2 STANDARD 5 ENTERTAIN 3 A SPEAKERS B 9 0 8 NIGHT STRAIGHT +10 ENT. MENU SRCH MODE BAND + ENTER TEST A-E/CAT. DISPLAY RETURN MEMORY PRESET/CH (U.S.A. model) 1 3 SET MENU TITLE – 4 7 LEVEL 4 2,5 MOVIE 5CH STEREO 6 3 Search for a channel you want to set as a preset channel by using one of the XM Satellite Radio search modes. See “Selecting the XM Satellite Radio search mode” on page 45 for details. Press CATEGORY on the front panel (or A-E/CAT. j / i on the remote control) repeatedly to select a preset channel group (A to E) while the MEMORY indicator is flashing. The preset channel group letter appears in the front panel display. A/B/C/D/E or CATEGORY – + ENTER A-E/CAT. NEXT PRESET/CH Front panel Remote control Flashes [040] Deep Tra Currently selected channel number MEMORY C [040] Deep Currently selected preset channel group 49 BASIC OPERATION You must proceed to and carry out steps 3 through 5 while the MEMORY indicator is flashing in the front panel display. XM® SATELLITE RADIO TUNING 4 Press PRESET/TUNING/CH l / h on the front panel (or PRESET/CH u / d on the remote control) repeatedly to select a preset channel number (1 to 8) while the MEMORY indicator is flashing. The preset channel number appears in the front panel display. Displaying the XM Satellite Radio information You can display the XM Satellite Radio information (such as channel number/name, category, artist name/song title) for the currently selected channel in the front panel display. (U.S.A. model) l PRESET/TUNING/CH h or – VOLUME + ENTER A-E/CAT. SET MENU STANDBY /ON PRESET/CH PRESET/TUNING SEARCH MODE FM/AM A/B/C/D/E XM Remote control PHONES SPEAKERS A/B/OFF STRAIGHT l PRESET/TUNING/CH h PROGRAM DISPLAY MAN'L/AUTO FM SET MENU NEXT l TUNING MODE MEMORY CATEGORY EDIT Front panel h l INPUT INPUT MODE AUTO/MAN'L h MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA Flashes DISPLAY MEMORY C5 [040] Deep LEVEL MENU BAND SRCH MODE – A-E/CAT. DISPLAY RETURN MEMORY + ENTER TEST Currently selected preset channel number 5 SET MENU TITLE DISPLAY PRESET/CH (U.S.A. model) Press MEMORY on the front panel (or MEMORY on the remote control) to set the selected XM Satellite Radio channel as a preset channel while the MEMORY indicator is flashing. A colon (:) appears next to the preset channel number for confirmation, and the MEMORY indicator turns off in the front panel display. MEMORY TEST or RETURN MEMORY MAN'L/AUTO FM Front panel Remote control Note If a status message or an error message appears in the front panel display, see the “XM Satellite Radio (U.S.A. model only)” section in “TROUBLESHOOTING” on page 63 for appropriate remedies. ■ Displaying the XM Satellite Radio information in the front panel display Press DISPLAY on the front panel or on the remote control repeatedly to toggle between the following XM Satellite Radio information display modes. TUNING MODE DISPLAY AUTO/MAN'L C5 :[040] Deep Channel number/name Front panel or Channel category Colon (:) DISPLAY Note Once you set a new preset channel, the one previously stored in the same preset channel group and number is cleared. 50 Remote control Artist name/song title XM® SATELLITE RADIO TUNING When the channel number/name is displayed: [040] Deep Tra When the channel category is displayed: <CAT>Rock When the artist name/song title is displayed: Coldplay / Clo y BASIC OPERATION • The front panel display can indicate up to 14 alphanumeric characters at once. You can set whether to display the XM Satellite Radio information in the front panel display in a continuous manner or by 14 alphanumeric characters at once by using the “SCROLL” parameter in “OPTION MENU” (see page 56). • If the XM Satellite Radio information contains a character that cannot be recognized by this unit, the character will be replaced with a space. Note If you press DISPLAY while the XM Satellite Radio information display is scrolling from right to left in the front panel display, the XM Satellite Radio information display mode toggles as described above. 51 SET MENU SET MENU You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. ■ BASIC MENU Use this feature to set up your system quickly and with minimal effort (see page 20). ■ SOUND MENU Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system. Parameter Features Page 1 SPEAKER SET Selects the size of each speaker, the speakers for low-frequency signal output, and the crossover frequency. 53 2 SP DISTANCE Adjusts the delay time of each speaker. 54 3 LFE LEVEL Adjusts the output level of the LFE channel for Dolby Digital or DTS signals. 54 4 D. RANGE Adjusts the dynamic range of Dolby Digital or DTS signals. 55 5 TC.BYPASS Adjusts the tone bypass settings. 55 ■ INPUT MENU Use this menu to manually reassign the input jacks, select the input mode or rename the input source. Parameter Features Page 1 INPUT ASSIGN Assigns the input jacks of this unit according to the component to be used. 55 2 INPUT MODE Selects the initial input mode of the source. 55 ■ OPTION MENU Use this menu to manually adjust the optional system parameters. Parameter Features Page 1 DISPLAY SET Adjusts the brightness of the display. 56 2 MEM. GUARD Locks sound field program parameters and other “SET MENU” settings. 56 3 AUDIO MUTE Adjusts the muting level. 56 4 XM RADIO SET Displays the current reception level of the XM Connect-and-Play digital antenna. 56 Note The “XM RADIO SET” parameter is only applicable to the U.S.A. model. 52 SET MENU Using SET MENU SOUND MENU Use the remote control to access and adjust each parameter. Use this menu to manually adjust any speaker settings. Notes AMP TV + + + VOL CH VOLUME – – MUTE INPUT 1 – MUTE 2CH STEREO MUSIC 1 2 STANDARD 5 ENTERTAIN MOVIE 3 4 5CH STEREO 6 A SPEAKERS B 9 0 7 8 NIGHT STRAIGHT +10 ENT. LEVEL SET MENU MENU TITLE 4 SRCH MODE BAND – TEST A-E/CAT. DISPLAY RETURN MEMORY 2 + ENTER PRESET/CH 3 • If you select “SETUP” (see page 20) and then select “SET” after adjusting the “SOUND MENU” parameters, the “SETUP” parameters override the “SOUND MENU” parameters. Do not enter “SETUP” unless you wish to change the “SOUND MENU” parameters. If you accidentally enter “SETUP”, select “CANCEL” to exit from “SETUP”. • Some menu item settings have no effect when the unit is reproducing a source with a digital signal sampling frequency greater than 48 kHz. ■ Speaker settings 1 SPEAKER SET y Use this feature to manually adjust any speaker setting. • You can change the “SET MENU” parameters while this unit is reproducing sound. • You can use NEXT (A/B/C/D/E) and SET MENU +/– (PRESET/TUNING/CH l / h) on the front panel to change these settings, if “TUNER” is not selected as the input source. Press NEXT to select the category or field you wish to change, and SET MENU +/– to change the parameters. y Press AMP. 2 Press SET MENU repeatedly to display the desired menu and then press i to enter the menu. y Center speaker 1A CENTER Choices: LRG (large), SML (small), NON (none) • Select “LRG” if you have a large center speaker. The entire range of the center channel signals is directed to the center speaker. • Select “SML” if you have a small center speaker. The low-frequency signals of the center channel are directed to the speakers selected with “1D BASS”. • Select “NON” if you do not have a center speaker. The entire range of the center channel signals is directed to the front left and right speakers. Once you press SET MENU, you can also select the menu by pressing u / d. Front speakers 1B FRONT Choices: LRG (large), SML (small) 3 Press u / d repeatedly to select the item and then press j / i to change the parameter. Depending on the menu item, press u / d to select a sub item, and then press j / i to change the parameter. 4 To exit, press u / d repeatedly until the menu disappears. • Select “SML” if you have small front speakers. The low-frequency signals of the front channel are directed to the speakers selected with “1D BASS”. • Select “LRG” if you have large front speakers. The entire range of the front left and right channel signals is directed to the front left and right speakers. 53 ADVANCED OPERATION 1 If you are not satisfied with the bass sounds from your speakers, you can change these settings according to your preference. SET MENU Surround left/right speakers 1C SURR Choices: LRG (large), SML (small), NON (none) • Select “LRG” if you have large surround left and right speakers. The entire range of the surround channel signals is directed to the surround left and right speakers. • Select “SML” if you have small surround left and right speakers. The low-frequency signals of the surround channel are directed to the speakers selected with “1D BASS”. • Select “NON” if you do not have surround speakers. This will set this unit to the Virtual CINEMA DSP mode (see page 33). Bass out 1D BASS Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals. Choices: SWFR (subwoofer), FRNT (front), BOTH • Select “SWFR” if you connected a subwoofer. The LFE signals as well as the low-frequency signals of other speakers set to “SML” or to “NON” are directed to the subwoofer. • Select “FRNT” if you did not connect a subwoofer. The LFE signals, the low-frequency signals of the front left and right channels, and the low-frequency signals of other speakers set to “SML” or to “NON” are all directed to the front left and right speakers regardless of the “1B FRONT” setting. • Select “BOTH” if you connected a subwoofer. The low-frequency signals of any source are output from the subwoofer. The LFE signals as well as the lowfrequency signals of other speakers set to “SML” or to “NON” are directed to the subwoofer. The lowfrequency signals of the front left and right channels are directed to the front left and right speakers and the subwoofer regardless of the “1B FRONT” setting. ■ Speaker distance 2 SP DISTANCE Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds will arrive at the listening position at the same time. Unit UNIT Choices: meters, feet Initial setting: [U.S.A. and Canada models]: feet [Other models]: meters • Select “meters” to adjust speaker distances in meters. • Select “feet” to adjust speaker distances in feet. Speaker distances Control range: 0.30 to 24.00 m (1.0 to 80.0 ft) Control step: 0.10 m (0.5 ft) Initial settings: 3.00 m (10.0 ft) • Select “FRONT” to adjust the distance of the front speaker. • Select “CENTER” to adjust the distance of the center speaker. • Select “SURR” to adjust the distance of the surround speaker. Notes • “CENTER” and “SURR” cannot be adjusted if “1A CENTER” and “1C SURR” are set to “NON” respectively. • No delay will be set if you set the same distance for “FRONT”, “CENTER”, and “SURR”. ■ Low-frequency effect level 3 LFE LEVEL Use this feature to adjust the output level of the LFE (lowfrequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals. Control range: –20 to 0 dB Control step: 1 dB Speaker SP LFE Adjusts the speaker LFE level. Headphone HP LFE Adjusts the headphone LFE level. Notes • Adjust the LFE level according to the capacity of your subwoofer or headphones. • Depending on the settings of “1D BASS”, some signals may not be output at the SUBWOOFER OUTPUT jack. 54 SET MENU ■ Dynamic range 4 D.RANGE Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. Choices: MIN (minimum), STD (standard), MAX (maximum) Speaker SP D.R Adjusts the speaker compression. Headphone HP D.R Adjusts the headphone compression. • Select “MIN” if you regularly listen at low volume levels. • Select “STD” for general use. • Select “MAX” to preserve the greatest amount of dynamic range. ■ Tone bypass 5 TC.BYPASS Use this feature to select whether audio output bypasses tone control circuitry when “BASS” and “TREBLE” are set to 0 dB (see page 24). Choices: AUTO, OFF • Select “AUTO” if you want signals to bypass tone control circuitry to provide the purest signal possible. • Select “OFF” if you do not want signals to bypass tone control circuitry. INPUT MENU Use this menu to reassign input jacks or select the input mode. ■ Input assignment 1 INPUT ASSIGN Use this feature to assign the input jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components. Once the input jacks are reassigned, you can select the corresponding component by using INPUT l / h on the front panel (or the input selector buttons on the remote control). For COMPONENT VIDEO jacks [A][B][C] Choices: [A] DVD, DTV/CBL, VCR, V-AUX [B] DVD, DTV/CBL, VCR, V-AUX [C] DVD, DTV/CBL, VCR, V-AUX For OPTICAL INPUT jacks 1 2 Choices: (1) DVD, DTV/CBL, CD, VCR, MD/CD-R, V-AUX (2) DVD, DTV/CBL, CD, VCR, MD/CD-R, V-AUX For COAXIAL INPUT jack 3 Choices: (3) DVD, DTV/CBL, CD, VCR, MD/CD-R, V-AUX ■ Input mode 2 INPUT MODE Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn on this unit (see page 26). Choices: AUTO, LAST • Select “AUTO” to allow this unit to automatically detect the type of input signal and select the appropriate input mode. • Select “LAST” to set this unit to automatically select the last input mode used for that source. 55 ADVANCED OPERATION Note • You cannot select a specific item more than once for the same type of jack. • When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to the signals input at the COAXIAL jack. SET MENU OPTION MENU Use this menu to adjust the optional system parameters. ■ Display settings 1 DISPLAY SET Dimmer DIMMER Use this feature to adjust the brightness of the front panel display. Choices: – 4 to 0 Control step: 1 • Press j to make the front panel display dimmer. • Press i to make the front panel display brighter. ■ Memory guard 2 MEM. GUARD Use this feature to prevent accidental changes to sound field program parameter values and other system settings. Choices: ON, OFF • Select “OFF” to turn off the “MEM. GUARD” feature. • Select “ON” to protect: – Sound field program parameters – All “MENU” items – All speaker levels Note When “MEM. GUARD” is set to “ON”, you cannot select and adjust any other “SET MENU” items. ■ Audio mute 3 AUDIO MUTE Use this feature to adjust how much the mute function reduces the output volume. Choices: MUTE, –50 dB, –20 dB • Select “MUTE” to completely mute all the audio output. • Select “–50 dB” to reduce the current volume by 50 dB. • Select “–20 dB” to reduce the current volume by 20 dB. 56 ■ XM Radio setting 4 XM RADIO SET XM Radio antenna XM ANT. Use this feature to check the current reception level of the XM Connect-and-Play digital antenna connected to the XM jack of this unit (see page 41). For the best reception, orient the XM Connect-and-Play digital antenna so that a value of 60% or more is displayed here. Display status: NONE, 0 to 100% Notes • “NONE” is displayed if the XM Connect-and-Play digital antenna is not connected to this unit. In this case, check the antenna connections (see page 41). • The “XM ANTENNA” parameter cannot be adjusted by using the remote control. Instead, you need to adjust the orientation of the XM Connect-and-Play digital antenna connected to the XM jack of this unit for a better percentage of the reception level. XM Radio information display scroll SCROLL Use this feature to set whether to scroll the XM Satellite Radio information display in a continuous manner or by 14 alphanumeric characters at once (see page 50). Choices: CONT, ONCE • Select “CONT” to scroll the XM Satellite Radio information display in a continuous manner. • Select “ONCE” to scroll the XM Satellite Radio information display by 14 alphanumeric characters at once. REMOTE CONTROL FEATURES REMOTE CONTROL FEATURES In addition to controlling this unit, the remote control can also operate other audiovisual components made by YAMAHA and other manufacturers. To control other components, you must set up remote control with the appropriate remote control codes (see page 59). Controlling this unit, a TV, or other components ■ Controlling this unit ■ Controlling a TV Press AMP to control this unit. Press DTV/CBL to control your TV. POWER POWER TV AV *2 POWER STANDBY CD MD/CD-R TUNER SLEEP DVD DTV/CBL VCR V-AUX *1 DTV/CBL *1 MULTI CH IN REC POWER POWER TV AV STANDBY POWER SLEEP CD MD/CD-R TUNER DVD DTV/CBL VCR AUDIO DISC SKIP DISC SKIP CODE SET AMP + VOL TV + + + CH VOLUME – – INPUT *2 *1 – CODE SET AMP AMP TV MUTE VOL + + CH VOLUME – – MUTE INPUT 2CH STEREO MUSIC – 1 2 MUTE MUTE 2CH STEREO MUSIC 1 2 STANDARD 5 ENTERTAIN MOVIE 3 4 A SPEAKERS B 9 0 8 NIGHT STRAIGHT +10 ENT. *3 *2 TEST LEVEL SET MENU MENU SRCH MODE + ENTER A-E/CAT. DISPLAY RETURN MEMORY PRESET/CH These buttons always control this unit. These buttons control this unit only when AMP is pressed. ENT. PRESET/CH ADVANCED OPERATION *2 STRAIGHT +10 TEST (U.S.A. model) (U.S.A. model) *1 8 NIGHT BAND DISPLAY Notes 0 – + A-E/CAT. RETURN 4 7 TITLE SRCH MODE ENTER MOVIE 3 5CH STEREO A SPEAKERS B MENU BAND ENTERTAIN 6 9 SET MENU TITLE MEMORY 5 7 LEVEL – STANDARD 5CH STEREO 6 V-AUX MULTI CH IN REC AUDIO Notes *1 To control your TV, you must set the appropriate remote control code for DTV/CBL. *2 These buttons always control your TV regardless of whether you press DTV/CBL or not. Remote control *3 Digital TV/Cable TV TV POWER Turns on or off the power. TV VOL +/– Increases or decreases the volume level. TV CH +/– Changes the channel number. TV MUTE Mutes the audio output. TV INPUT Changes the input source. These buttons control your TV only when DTV/CBL is pressed. For details, see the “Digital TV/Cable TV” column on page 58. 57 REMOTE CONTROL FEATURES ■ Controlling other components Once you set the appropriate remote control codes (see page 59), use the input selector buttons to select the component you want to control. Note that some buttons may not correctly operate the selected component. 1 Notes 2 POWER POWER TV AV CD MD/CD-R DVD DTV/CBL STANDBY POWER TUNER SLEEP VCR MULTI CH IN REC AUDIO *1 This button functions only when the original remote control of the component has a POWER button. *2 These buttons can operate your VCR when the remote control code of your VCR is set in VCR and DTV/CBL is selected. *3 When you use this button to record a source, press it twice repeatedly to prevent a malfunction. Remote control 1 2 TV + VOL + + CH VOLUME – – MUTE INPUT CD player MD/CD recorder Power *1 REC/ DISC SKIP Disc skip Rec *3 Rec *2, 3 Disc Skip Rec (MD) Play Play Play *2 Play Play Search backward Search backward *2 Search backward Search backward Search forward Search forward *2 Search forward Search forward Pause Pause *2 e Search forward Pause Skip backward a Skip forward 0-9, +10 TITLE 3 2CH STEREO MUSIC 1 2 5 3 MOVIE 4 5CH STEREO 6 A SPEAKERS B 9 4 5 6 ENTERTAIN STANDARD 7 8 NIGHT STRAIGHT +10 ENT. 0 LEVEL MENU BAND SRCH MODE – + ENTER TEST 9 A-E/CAT. DISPLAY RETURN MEMORY 7 8 SET MENU TITLE PRESET/CH Tuner (FM/AM) Tuner (XM) Preset stations (1-8) Preset channels (1-8)/ direct number access Audio b s – MUTE – Power *1 Search backward – INPUT MUTE Power *2 f Pause Pause Skip backward Skip backward Skip forward Skip forward Stop Stop Stop *2 Stop Stop Numeric buttons Numeric buttons Numeric buttons Numeric buttons Numeric buttons Title PRESET/CH u Up VCR channel up PRESET/CH d Down VCR channel down Band Band Preset up (1-8) Preset/channel up Preset down (1-8) Preset/channel down Left Preset down (A-E) Category/group down A-E/CAT. i Right Preset up (A-E) Category/group up ENTER Select A-E/CAT. j 58 AMP Power *1 AUDIO 6 7 8 9 Digital TV/ Cable TV VCR CODE SET Power *1 w 4 5 DVD player DISC SKIP AV POWER p 3 V-AUX – MUTE RETURN ENT. MENU DISPLAY Return Title/Index Memory Enter Enter Index Index Display Display Display Menu Display Enter Search mode Display REMOTE CONTROL FEATURES Setting remote control codes 1 You can control other components by setting the appropriate remote control codes. You can set the remote control codes for each input source. For a complete list of available remote control codes, refer to “LIST OF REMOTE CONTROL CODES” at the end of this manual. The following table shows the default component (Library: component category) and the remote control code for each input source. Remote Control Code Default Settings Library (component category) Manufacturer Default code CD CD YAMAHA 199 MD/CD-R CD-R YAMAHA 499 TUNER *1 TUNER YAMAHA Fixed DVD YAMAHA CODE SET While holding down CD MD/CD-R DVD DTV/CBL VCR V-AUX Note You need to hold down CODE SET throughout this procedure. Input source DVD While holding down CODE SET, press one of the input selector buttons to select the component you want to set up. 699 2 While holding down CODE SET, press the numeric buttons (0 to 9) to enter the threedigit remote control code for the component to be used. Refer to “LIST OF REMOTE CONTROL CODES” at the end of this manual. CODE SET While holding down 2CH STEREO MUSIC ENTERTAIN MOVIE 1 2 3 4 STANDARD 5 5CH STEREO 6 7 8 A SPEAKERS B *2 – – – VCR – – – V-AUX – – – You can control this unit only. You can only set TV remote control codes in DTV/CBL. 0 Notes • If the manufacturer of your component has more than one code, try each of them until you find the correct one. • You can only assign one remote control code to each input selector button. Note You may not be able to operate your YAMAHA component even if a YAMAHA remote control code is initially set as listed above. In this case, try setting other YAMAHA remote control codes. 59 ADVANCED OPERATION *1 9 DTV/ CBL*2 TROUBLESHOOTING TROUBLESHOOTING Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized YAMAHA dealer or service center. ■ General Problem This unit fails to turn on or enters the standby mode soon after the power is turned on. No sound 60 Cause Remedy See page The power cable is not connected or the plug is not completely inserted. Connect the power cable firmly. The speaker impedance setting is incorrect. Set the speaker impedance to match your speakers. 9, 11 The protection circuitry has been activated. Make sure that all speaker wire connections on this unit and on all speakers are secure and that the wire for each connection does not touch anything other than its respective connection. 11 This unit has been exposed to a strong external electric shock (such as lightning or strong static electricity). Set this unit to the standby mode, disconnect the power cable, plug it back in after 30 seconds and then use it normally. — Incorrect input or output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. 13-17 No appropriate input mode has been selected. Select an appropriate input mode. No appropriate input source has been selected. Select an appropriate input source with INPUT l / h on the front panel (or the input selector buttons on the remote control) and MULTI CH INPUT on the front panel (or MULTI CH IN on the remote control). Speaker connections are not secure. Secure the connections. 11 The front speakers to be used have not been selected properly. Select the front speakers with SPEAKERS on the front panel or SPEAKERS A/B on the remote control. 23 The volume is turned down. Turn up the volume. — The sound is muted. Press MUTE or VOLUME +/– on the remote control to resume audio output and then adjust the volume. 25 Signals this unit cannot reproduce are being input from a source component, such as a CD-ROM. Play a source whose signals can be reproduced by this unit. — — 26 23, 25 TROUBLESHOOTING Problem The sound suddenly goes off. Sound is heard from the speaker on one side only. Cause The protection circuitry has been activated because of a short circuit, etc. Remedy See page Check that the impedance selector setting is correct. 9, 11 Check that the speaker wires are not touching each other and then turn this unit back on. — The sleep timer has turned off this unit. Turn on this unit, and play the source again. — The sound is muted. Press MUTE or VOLUME +/– on the remote control to resume audio output. 25 Incorrect cable connections. Connect the cables properly. If the problem persists, the cables may be defective. 13-17 Incorrect settings in “SP LEVEL”. Adjust the “SP LEVEL” settings. 26 Only the center speaker outputs substantial sound. When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, and the front and surround speakers output effect sounds. No sound is heard from the center speaker. “CENTER” in “SET MENU” is set to “NONE”. Set “CENTER” to “SML” or “LRG”. 53 One of the HiFi DSP programs (except for 5ch Stereo) has been selected. Try another sound field program. 30 “SURR” in “SPEAKER SET” is set to “NONE”. Set “SURR” to “SML” or “LRG”. 54 This unit is in the “STRAIGHT” mode and a monaural source is being played back. Press STRAIGHT on the front panel so that “STRAIGHT” disappears from the front panel display. 33 “BASS” in “SPEAKER SET” is set to “FRNT” when a Dolby Digital or DTS signal is being played. Set “BASS” to “SWFR” or “BOTH”. 54 “BASS” in “SPEAKER SET” is set to “SWFR” or “FRNT” when a 2-channel source is being played. Set “BASS” to “BOTH”. 54 No sound is heard from the surround speakers. No sound is heard from the subwoofer. The source does not contain lowfrequency bass signals. ADDITIONAL INFORMATION 61 TROUBLESHOOTING Problem Cause Remedy See page Dolby Digital or DTS sources cannot be played. (Dolby Digital or DTS indicator in the front panel display does not light up.) The connected component is not set to output Dolby Digital or DTS digital signals. Make an appropriate setting following the operating instructions for your component. — “INPUT MODE” is set to “ANALOG”. Set “INPUT MODE” to “AUTO” or “DTS”. 26 A humming sound is heard. Incorrect cable connections. Connect the audio cables firmly. If the problem persists, the cables may be defective. — The volume level cannot be increased, or the sound is distorted. The component connected to the AUDIO OUT (REC) jacks of this unit is turned off. Turn on the power of the component. — The sound effect cannot be recorded. It is not possible to record the sound effect with a recording component. A source cannot be recorded by an analog component connected to the AUDIO OUT (REC) jacks. The source component is not connected to the analog AUDIO IN jacks of this unit. Connect the source component to the analog AUDIO IN jacks. The sound field parameters and some other settings of this unit cannot be changed. “MEM. GUARD” in “OPTION MENU” is set to “ON”. Set “MEM. GUARD” to “OFF”. 56 This unit does not operate properly. The internal microcomputer has been frozen by an external electric shock (such as lightning or excessive static electricity) or by a power supply with low voltage. Disconnect the power cable from the AC wall outlet and then plug it in again after about 30 seconds. — “CHECK SP WIRES” appears in the front panel display. Speaker cables are short-circuited. Make sure all speaker cables are connected correctly. 11 There is noise interference from digital or radio frequency equipment. This unit is too close to the digital or highfrequency equipment. Move this unit further away from such equipment. — The picture is disturbed. The video source uses scrambled or encoded signals to prevent dubbing. This unit suddenly enters the standby mode. The internal temperature becomes too high and the overheat protection circuitry has been activated. Wait about 1 hour for this unit to cool down and then turn it back on. — 62 14, 17 TROUBLESHOOTING ■ Tuner Problem Cause FM stereo reception is noisy. FM AM ■ Remedy The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. See page Check the antenna connections. 18 Try using a high-quality directional FM antenna. — Use the manual tuning method. 36 There is distortion, and clear reception cannot be obtained even with a good FM antenna. There is multi-path interference. Adjust the antenna position to eliminate multi-path interference. — The desired station cannot be tuned into with the automatic tuning method. The signal is too weak. Use a high-quality directional FM antenna. — Use the manual tuning method. 36 Previously preset stations can no longer be tuned into. This unit has been disconnected for a long period. Set preset stations. The desired station cannot be tuned into with the automatic tuning method. The signal is weak or the antenna connections are loose. Tighten the AM loop antenna connections and orient it for the best reception. — Use the manual tuning method. 36 There are continuous crackling and hissing noises. Noises result from lightning, fluorescent lamps, motors, thermostats and other electrical equipment. Use an outdoor antenna and a ground wire. This will help somewhat, but it is difficult to eliminate all noise. — There are buzzing and whining noises. A TV set is being used nearby. Move this unit away from the TV set. — 37, 38 XM Satellite Radio (U.S.A. model only) If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the cause and follow the corresponding remedies. See page Cause Remedy CHECK ANTENNA The XM Connect-and-Play digital antenna is not connected to the XM jack of this unit or does not work properly. Check the XM Connect-and-Play digital antenna connections and orient it for the best reception level. 41 UPDATING The XM user encryption code is being updated. Wait until the encryption code is updated. — NO SIGNAL The signal is too weak. Check the XM Connect-and-Play digital antenna connections and orient it for the best reception level. 41 LOADING It takes longer than four seconds for audio or text data to be decoded. Wait until the decoding process has finished. — OFF AIR The XM Satellite Radio channel you selected is not currently broadcasting any signals. Check the channel number again or select another XM Satellite Radio channel. — <XM> - - - The Channel Station ID (SID) is no longer available. - - - No artist name or song title is available. Select another channel category by pressing CATEGORY on the front panel (or A-E/CAT. j / i on the remote control) repeatedly. 46 / - - - <CAT> - - - No channels are available for the selected category. 63 ADDITIONAL INFORMATION Status message TROUBLESHOOTING ■ Remote control Problem The remote control does not work nor function properly. Cause See page Wrong distance or angle. The remote control functions within a maximum range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel. 7 Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit. — The batteries are weak. Replace all batteries. 3 The remote control code is not correctly set. Set the remote control code correctly using “LIST OF REMOTE CONTROL CODES” at the end of this manual. 59 Try setting another code for the same manufacturer using “LIST OF REMOTE CONTROL CODES” at the end of this manual. 59 Even if the remote control code is correctly set, there are some models that do not respond to the remote control. 64 Remedy RESETTING THE SYSTEM RESETTING THE SYSTEM Use this feature to reset all the parameters of this unit to the initial factory settings. Notes • This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. • The initial factory settings are activated next time you turn on this unit. y To cancel the initialization procedure at any time without making any changes, press STRAIGHT repeatedly to select “CANCEL” and then press STANDBY/ON on the front panel. (U.S.A. model) 3 VOLUME STANDBY /ON STRAIGHT PRESET/TUNING SEARCH MODE FM/AM XM A/B/C/D/E STRAIGHT SPEAKERS A/B/OFF PROGRAM TUNING MODE MEMORY DISPLAY NEXT l l PRESET/TUNING/CH h CATEGORY EDIT PHONES Press STRAIGHT on the front panel repeatedly to select “RESET”. MAN'L/AUTO FM SET MENU h l INPUT INPUT MODE AUTO/MAN'L h EFFECT MULTI CH INPUT EFFECT TONE CONTROL BASS/TREBLE SILENT CINEMA 1,2,4 1 2,3 STANDBY /ON 2 PRESET -RESET Press STANDBY/ON on the front panel to set this unit to the standby mode. Select “CANCEL” to cancel the initialization procedure without making any changes. 4 STANDBY /ON ADDITIONAL INFORMATION Press and hold STRAIGHT on the front panel and then press STANDBY/ON to turn on this unit. The advanced setup menu appears in the front panel display. Press STANDBY/ON on the front panel to confirm your selection and set this unit to the standby mode. While holding down STRAIGHT STANDBY /ON EFFECT 65 GLOSSARY GLOSSARY Audio information ■ Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (front L/R and center), and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (Low Frequency Effect), the system has a total of 5.1-channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the surround speakers, more accurate moving sound effects and surround sound environment are possible than with Dolby Surround. The wide dynamic range from maximum to minimum volume reproduced by the 5 full-range channels and the precise sound orientation generated using digital sound processing provide listeners with unprecedented excitement and realism. With this unit, any sound environment from monaural up to a 5.1-channel configuration can be freely selected for your enjoyment. ■ Dolby Pro Logic II Dolby Pro Logic II is an improved technique used to decode vast numbers of existing Dolby Surround sources. This new technology enables a discrete 5-channel playback with 2 front left and right channels, 1 center channel, and 2 surround left and right channels instead of only 1 surround channel for conventional Pro Logic technology. There are three modes available: “Music mode” for music sources, “Movie mode” for movie sources and “Game mode” for game sources. ■ Dolby Surround Dolby Surround uses a 4-channel analog recording system to reproduce realistic and dynamic sound effects: 2 front left and right channels (stereo), a center channel for dialog (monaural), and a surround channel for special sound effects (monaural). The surround channel reproduces sound within a narrow frequency range. Dolby Surround is widely used with nearly all video tapes and laser discs, and in many TV and cable broadcasts as well. The Dolby Pro Logic decoder built into this unit employs a digital signal processing system that automatically stabilizes the volume on each channel to enhance moving sound effects and directionality. 66 ■ DTS (Digital Theater Systems) Digital Surround DTS digital surround was developed to replace the analog soundtracks of movies with a 5.1-channel digital sound track, and is now rapidly gaining popularity in movie theaters around the world. Digital Theater Systems Inc. has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS digital surround in your home. This system produces practically distortion-free 5.1-channel sound (technically, left, right and center channels, 2 surround channels, plus an LFE 0.1 channel as a subwoofer, for a total of 5.1channels). ■ ITU-R ITU-R is the radio communication sector of the ITU (International Telecommunication Union). ITU-R recommends a standard speaker placement which is used in many critical listening rooms, especially for mastering purposes. ■ LFE 0.1 channel This channel reproduces low-frequency bass signals. The frequency range of this channel is from 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduced by the other 5 channels in Dolby Digital or DTS 5.1-channel systems. ■ PCM (Linear PCM) Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression. This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time. Standing for “Pulse Code Modulation”, the analog signal is encoded as pulses and then modulated for recording. ■ Sampling frequency and number of quantized bits When digitizing an analog audio signal, the number of times the signal is sampled per second is called the sampling frequency, while the degree of fineness when converting the sound level into a numeric value is called the number of quantized bits. The range of rates that can be played back is determined based on the sampling rate, while the dynamic range representing the sound level difference is determined by the number of quantized bits. In principle, the higher the sampling frequency, the wider the range of frequencies that can be played back, and the higher the number of quantized bits, the more finely the sound level can be reproduced. GLOSSARY Sound field program information Video information ■ CINEMA DSP ■ Component video signal Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater having many speakers designed for acoustic effects. Since home conditions, such as room size, wall material, number of speakers, and so on, can differ so widely, it is inevitable that there are differences in the sound heard. Based on a wealth of actually measured data, YAMAHA CINEMA DSP uses YAMAHA original DSP technology to combine Dolby Pro Logic, Dolby Digital and DTS systems to provide the audiovisual experience of movie theater in the listening room of your own home. With the component video signal system, the video signal is separated into the Y signal for the luminance and the PB and PR signals for the chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. The component signal is also called the “color difference signal” because the luminance signal is subtracted from the color signal. A monitor with component input jacks is required in order to output component signals. ■ SILENT CINEMA YAMAHA has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound field program so that accurate representations of all the sound field programs can be enjoyed on headphones. ■ Composite video signal With the composite video signal system, the video signal is composed of three basic elements of a video picture: color, brightness and synchronization data. A composite video jack on a video component transmits these three elements combined. ■ Virtual CINEMA DSP YAMAHA has developed a Virtual CINEMA DSP algorithm that allows you to enjoy DSP surround effects even without any surround speakers by using virtual surround speakers. It is even possible to enjoy Virtual CINEMA DSP using a minimal two-speaker system that does not include a center speaker. ADDITIONAL INFORMATION 67 SPECIFICATIONS SPECIFICATIONS AUDIO SECTION FM SECTION • Minimum RMS Output Power for Front, Center, Surround [U.S.A. and Canada models] 1 kHz, 0.9% THD, 8 Ω/6 Ω ............................................ 110 W [Other models] 1 kHz, 0.9% THD, 6 Ω ................................................... 100 W • Tuning Range [U.S.A. and Canada models] .......................... 87.5 to 107.9 MHz [Other models] ............................................ 87.50 to 108.00 MHz • Maximum Output Power [Europe model] 1 kHz, 0.7% THD, 4 Ω ................................................... 105 W • Maximum Power [Asia, China, Korea and General models] 1 kHz, 10% THD, 6 Ω ..................................................... 110 W • 50 dB Quieting Sensitivity (IHF, 100% mod.) Mono ................................................................. 2.8 µV (20.2 dBf) • Signal to Noise Ratio (IHF) Mono/Stereo ............................................................. 73 dB/70 dB • Harmonic Distortion (1 kHz) Mono/Stereo ................................................................ 0.5%/0.5% AM SECTION • Dynamic Power [U.S.A. and Canada models] (Impedance Selector: 8 Ω) (IHF, 8/6/4/2 Ω) ......................................... 120/140/160/180 W [Other models] (IHF, 6/4/2 Ω) .................................................... 105/135/165 W • Tuning Range [U.S.A. and Canada models] .............................. 530 to 1710 kHz [Asia and General models] ................. 530/531 to 1710/1611 kHz [Other models] .................................................... 531 to 1611 kHz • Frequency Response CD, etc. to Front L/R ............................ 10 Hz to 100 kHz, –3 dB GENERAL • Total Harmonic Distortion 1 kHz, 50 W, 6 Ω, Front L/R .................................... 0.06% or less • Signal to Noise Ratio (IHF-A Network) CD (250 mV) to Front L/R, Effect Off ................. 100 dB or more • Residual Noise (IHF-A Network) Front L/R ................................................................ 150 µV or less • Channel Separation (1 kHz/10 kHz) CD, etc. (5.1 kΩ terminated) to Front L/R ................................................................... 60 dB/45 dB or more • Tone Control (Front L/R) BASS Boost/Cut .................................................... ±10 dB/100 Hz TREBLE Boost/Cut .............................................. ±10 dB/20 kHz • Phones Output .......................................................... 400 mV/470 Ω • Input Sensitivity/Input Impedance CD, etc. ................................................................. 200 mV/47 kΩ MULTI CH INPUT ............................................... 200 mV/47 kΩ • Output Level/Output Impedance AUDIO OUT (REC) ............................................ 200 mV/1.2 kΩ SUBWOOFER OUTPUT ........................................... 4 V/1.2 kΩ VIDEO SECTION • Video Signal Type [U.S.A., Canada, Korea and General models] .................... NTSC [Other models] ....................................................................... PAL • Component Signal Level .............................................. 1 Vp-p/75 Ω • Signal to Noise Ratio ................................................ 50 dB or more • Frequency Response (MONITOR OUT) Video Signal ............................................. 5 Hz to 10 MHz, –3 dB Component Signal .................................... 5 Hz to 60 MHz, –3 dB 68 • Power Supply [U.S.A. and Canada models] ............................. 120 V AC, 60 Hz [Australia model] ............................................... 240 V AC, 50 Hz [U.K. and Europe models] ................................. 230 V AC, 50 Hz [Korea model] .................................................... 220 V AC, 60 Hz [China model] .................................................... 220 V AC, 50 Hz [Asia and General models] ............................................. 110-120/220–240 V AC, 50/60 Hz • Power Consumption [U.S.A. and Canada models] ................................. 240 W/320 VA [Other models] .................................................................... 240 W • Standby Power Consumption [U.S.A. and Canada models] ............................................... 0.5 W [Other models] ..................................................................... 0.7 W • Dimensions (W x H x D).................................. 435 x 151 x 315 mm (17-1/8” x 5-15/16” x 12-7/16”) • Weight .............................................................. 9.0 kg (19 lbs 13 oz) * Specifications are subject to change without notice. LIST OF REMOTE CONTROL CODES TV ADMIRAL AIWA 292, 293 294, 276, 283, 284 AKAI 295, 296 ALBA 296 AOC 297 BELL&HOWELL 292 BESTAR 298 BLAUPUNKT 229, 222 BLUE SKY 298 BRANDT 223 BROCSONIC 297 BUSH 296 CLATRONIC 298 CRAIG 224 CROSLEX 225 CURTIS MATHIS 297, 226 DAEWOO 297, 298, 224, 227, 228 DAYTRON 239 DUAL 298 DWIN 293 EMERSON 297, 224, 239, 232 FERGUSON 223, 265, 266 FIRST LINE 298 FISHER 295, 233 FRABA 298 FUNAI 277, 278 GE 293, 297, 234, 235, 236 GOODMANS 296, 298, 223 GRUNDIG 229, 238, 249 HITACHI 297, 239, 242, 243, 285 ICE 296 IRRADIO 296 ITT/NOKIA 244, 245 JC PENNY 293, 297, 234, 237 JVC 296, 246, 247, 286 KENDO 298 KTV 297, 239 LG/GOLDSTAR 297, 298, 239, 237 LOEWE 298, 248 LXI 293, 297, 225, 226, 233 MAGNAVOX 297, 225, 239 MARANTZ 298 MATSUI 295 MEMOREX 297 MITSUBISHI 299, 297, 259, 287 NEC 297, 252, 282 NOKIA 244, 245 NOKIA OCEANIC 245 NORDMENDE 265, 266 ONWA 296 PANASONIC 234, 235, 236, 253, 288, 211 PHILCO 297, 225, 239 PHILIPS 225 PIONEER 226, 235, 254, 255, 268 PORTLAND 297, 256 PROSCAN 293 PROTON 297 QUASAR 234, 235 RADIO SHACK299, 293, 297 RCA 293, 297, 234, 256, 257, 258 SABA 223, 269, 265, 266 SAMPO 297 SAMSUNG 297, 239, 248, 262, 275 SANYO 295, 233, 279, 272, 273, 274, 212 SCHNEIDER 296 SCOTT 297 SHARP 292, 239, 232, 213, 216 SIEMENS 229 SIGNATURE 292 SONY 263, 214 SYLVANIA 297, 225 TELEFUNKEN 269, 264, 265, 266 THOMSON 223, 266 TOSHIBA 292, 226, 267, 215 VIDECH 297, 242 WARDS 297, 239, 232 YAMAHA 299, 292, 253, 242 VCR ADMIRAL AIWA 395 396, 397, 398, 329 AKAI 322, 323, 324 AUDIO DYNAMIC 392, 394 BELL&HOWELL 393 BLAUPUNKT 325, 326 BROCSONIC 327 BUSH 322 CANON 325, 328 CGM 396, 332 CITIZEN 396 CRAIG 396, 363 CURTIS MATHIS 397, 328, 333 DAEWOO 328, 334, 335 DBX 392, 394 DIMENSIA 333 DYNATECH 397 EMERSON 327, 334, 396, 397 FISHER 393, 336 FUNAI 397 GE 328, 333, 387 GO VIDEO GOODMANS GRUNDIG HITACHI 353 334, 337 332, 338 325, 333, 349, 342, 343 INSTANT REPLAY 325, 328 ITT/NOKIA 393 JC PENNY 392, 393, 394, 328, 333, 349, 396, 363 JVC 392, 394, 344, 345, 346, 347 KENDO 396 KENWOOD 392, 394, 396 LG/GOLDSTAR 396, 388 LOEWE 396, 337 LUXOR 395 LXI 393, 396, 397, 336, 349 MAGNAVOX 325, 326, 328 MARANTZ 392, 394 MARTA 396 MATSUI 396 MEMOREX 328, 336, 396, 397 MINOLTA 333, 349 MITSUBISHI 399, 344, 348, 359, 352, 353 MTC 363, 397 MULTITECH 397, 348, 354 NEC 392, 394, 344, 383 NOKIA 393, 395 NOKIA OCEANIC 395 OKANO 323 OLYMPIC 325, 328 ORION 327 PANASONIC 325, 328, 355, 378, 384, 385, 386 PENTAX 333, 349 PHILCO 325, 328, 397 PHILIPS 325, 326, 328, 337, 356, 357 PHONOLA 337 PILOT 396 PIONEER 325 QUASAR 325, 328 RCA/PROSCAN 325, 326, 328, 333, 335, 349, 358, 369, 363, 397 REALISTIC 393, 397, 328, 336, 359, 362, 396, 363 SAMSUNG 354, 358, 363, 364, 365, 366 SANSUI 394 SANYO 393, 336, 367 SCHNEIDER 337 SCOTT 399, 335, 336, 348, 359, 352, 354, 358 SELECO 322 SHARP 395, 362, 382 SIEMENS 393 SIGNATURE 2000 395, 397 SONY 368, 379, 372, 373, 374, 375 SYLVANIA 397, 325, 326, 328 SYMPHONIC 397 TANDBERG 334 TANDY 397 TASHIRO 396 TATUNG 392, 394 TEAC 392, 394, 397 TECHNICS 325, 328 TEKNIKA 396 TELEFUNKEN 376, 377 THOMAS 397 THORN 393, 396 TOSHIBA 335, 369, 389 TOTEVISON 363, 396 UNITECH 363 UNIVERSUM 396, 327, 376 VIDEOSONIC 363 W.WHOUSE 396 WARDS 395, 396, 336, 362 YAMAHA 399, 392, 393, 394 ZENITH 344, 368, 379, 396, 397 DVD player DENON 623, 624 FUNAI 625 HITACHI 626 JVC 627 KENWOOD 628 LG/GOLD STAR 645 MITSUBISHI 629 ONKYO 632, 633, 634 PANASONIC 623, 635 PHILIPS 699, 647 PIONEER 636, 637, 638 RCA 639 SAMSUNG 642 SHARP 643 SONY 644 THOMSON 646 TOSHIBA 634 YAMAHA 699, 622, 623, 647 MD player YAMAHA 599 CD player YAMAHA 199 CD recorder YAMAHA 499 APPENDIX 01EN_HTR-5930_U_cv-4.fm Page iii Monday, December 12, 2005 9:33 AM © 2006 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA All rights reserved. Printed in China WG72080