Documenttranscriptie

CDX-880/580/480 Natural Sound Compact Disc Player Random Access Programmable Play Random-Sequence Play Single Track/Entire Disc Repeat Play Automatic Spacing Capability Automatic Tape-Programming Automatic Peak Level Searching Capability CD Synchronized Recording with a Compatible YAMAHA Tape Disk Display Brightness Changing Capability Remote Control Capability Thank you for selecting this YAMAHA Compact Disc Player. OWNER’S MANUAL CONTENTS Safety Instructions.................... 2 Connections ............................. 4 Identification of Components.... 6 Loading the Disc/Disc Play....... 8 Random-Sequence Play ........ 12 Repeat Play............................ 12 Program Play.......................... 13 Index Search .......................... 14 Track Programming for Recording to Tape .................. 15 CD Synchronized Recording ...... 19 Notes about the Remote Control Transmitter ................. 20 Notes about Handling Compact Discs ....................... 20 Troubleshooting ...................... 21 Specifications ......................... 21 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT! Please record the serial number of this unit in the space below. • Explanation of Graphical Symbols Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.  SAFETY INSTRUCTIONS 10 Power Sources – The unit should be connected to a CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 4 Follow Instructions – All operating and other instructions should be followed. 5 Water and Moisture – The unit should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. 6 Carts and Stands – The unit should be used only with a cart or stand that is recommended by the manufacturer. 6A A unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn. 7 Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. 8 Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. 9 2 Heat – The unit should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat. power supply only of the type described in the operating instructions or as marked on the unit. 11 Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. 12 Cleaning – The unit should be cleaned only as recommended by the manufacturer. 13 Nonuse Periods – The power cord of the unit should be unplugged from the outlet when left unused for a long period of time. 14 Object and Liquid Entry – Care should be taken so that objects do not fall into and liquids are not spilled into the inside of the unit. 15 Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the unit; or C. The unit has been exposed to rain; or D. The unit does not appear to operate normally or exhibits a marked change in performance; or E. The unit has been dropped, or the cabinet damaged. 16 Servicing – The user should not attempt to service the unit beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel. 17 Power Lines – An outdoor antenna should be located away from power lines. 18 Grounding or Polarization – Precautions should be taken so that the grounding or polarization is not defeated. We Want You Listening For A Lifetime (for US customers only) YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference  CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to rain and water. 7 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that your unit is faulty. 8. Do not place another component on top of this unit, because to do so will discolor or damage the surface of the unit. 9. To prevent damage by lightning, disconnect the power 3 Do not operate the unit upside-down. It may overheat, possibly causing damage. 4 Never open the cabinet. If a foreign object drops into the set, contact your dealer. 10. When disconnecting the power cord from the household Do not use force on switches, knobs or cords. When moving the set, first turn the unit off. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself. 11. When moving the unit, be sure to first disconnect the 5 6 cord from the household AC outlet during an electrical storm. AC outlet, grasp the plug; do not pull the cord. power cord from the household AC outlet, and disconnect cords connected to other equipment. The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off. Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. WARNING CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only. DANGER Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. Laser Diode Properties • Material: GaAlAs • Wavelength: 780nm • Emission Duration: continuous • Laser Output: max. 44.6µW* * This output is the value measured at a distance of about 200mm from the objective lens surface on the Optical Pickup Block. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only. DANGER: The use of optical instrument with this product will increase eye hazard. FCC INFORMATION (for US customers only) 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. Relocate either this product or the device that is being affected by the interference. 3. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. 3  CONNECTIONS • • • Before making any connections, switch OFF the power to the unit and the amplifier or other component. Connections should be made to the correct input terminals of the amplifier or other component. If the placement of this unit causes noise to other equipment, such as a tuner, separate them from each other. CDX-880 LINE OUT CDX-880 DIGITAL OUT VARIABLE FIXED OPTICAL COAXIAL To AC outlet ➌ ➋ Connection cord (not included) Optical fiber cable (not included) ➊ Connection cord (included) Amplifier OPTICAL COAXIAL CD DIGITAL IN CDX-580 LINE OUT CDX-580 DIGITAL OUT To AC outlet ➌ Connection cord (not included) ➊ Connection cord (included) Amplifier COAXIAL CD 4 DIGITAL IN  CDX-480 CDX-480 LINE OUT To AC outlet ➊ Connection cord (included) Amplifier CD Choose one of the ways listed below to connect this unit to your amplifier. When the LINE OUT (analog) terminals of this unit are used ( ➊ ) • • • Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component. Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, refer to the operation instructions for the amplifier being used. CDX-880 only Connect to either the VARIABLE terminals or the FIXED terminals. (As a general rule, connect to the FIXED terminals.) VARIABLE: The output level of these terminals can be adjusted by using the OUTPUT LEVEL buttons. FIXED: The output level of these terminals is not variable. CDX-880 only When the DIGITAL OUT (OPTICAL) terminal of this unit is used ( ➋ ) • • • • Before using this terminal, remove the terminal’s cover by pulling it. Make the connection from this terminal to the optical input terminal of an amplifier by using a commercially available optical fiber cable. * Use an optical fiber cable that conforms to EIAJ standards. Other cables might not function correctly. Be sure to attach the terminal’s cover when this terminal is not being used, in order to protect the terminal from dust. The level of signals output into an amplifier is fixed to max. and cannot be adjusted. CDX-880 and CDX-580 only When the DIGITAL OUT (COAXIAL) terminal of this unit is used ( ➌ ) • • • Make the connection from this terminal to the digital input terminal of an amplifier or D/A (digital-to-analog) converter by using a connection cord. CDX-880 only The level of signals output into an amplifier is fixed to max. and cannot be adjusted. CDX-580 only Adjust the level of signals output into an amplifier to max. by using the OUTPUT LEVEL buttons. 5  IDENTIFICATION OF COMPONENTS * ( ) indicates the page number on which the control part is best described. FRONT PANEL * The PLAY/PAUSE button on the main unit has both the functions of the PLAY button and the PAUSE button on the remote control transmitter. * The control functions on the main unit and on the remote control transmitter are virtually identical, with the exceptions below. CDX-880 POWER switch (p. 8) AUTO DISPLAY OFF indicator (p. 11) OUTPUT LEVEL control (p. 11) POWER switch (p. 8) POWER OPEN/CLOSE PROG TAPE STOP PEAK SPACE INDEX 3 4 REPEAT RANDOM SKIP SEARCH AUTO DISPLAY OFF PHONES +10 1 2 5 6 7 PLAY/PAUSE 8 9 0 OUTPUT LEVEL TIME Display panel PHONES jack (p. 11) Remote control sensor (p. 20) CDX-580, CDX-480 * The SKIP/SEARCH button on the main unit has both the functions of the SKIP buttons and the SEARCH buttons on the remote control transmitter. POWER switch (p. 8) OUTPUT LEVEL control (p. 11) CDX-580 only (p. 11) AUTO DISPLAY OFF indicator (p. 11) POWER switch (p. 8) POWER OPEN/CLOSE AUTO DISPLAY OFF +10 SKIP/SEARCH STOP PLAY/PAUSE OUTPUT LEVEL 1 2 3 4 5 6 7 8 9 0 DOWN PHONES UP Display panel PHONES jack (p. 11) Remote control sensor (p. 20) 6  * ( ) indicates the page number on which the control part is best described. REMOTE CONTROL TRANSMITTER DIMMER button (p. 11) CLEAR button (p. 14) TAPE button (p. 15) OPEN/CLOSE button (p. 8) OPEN/CLOSE DIMMER TIME TIME button (p. 10) PROG button (p. 13) PROG TAPE CLEAR PEAK PEAK button (p. 18) SPACE S/F SPACE button (p. 10) REPEAT button (p. 10) RANDOM RANDOM button (p. 12) REPEAT +10 1 2 3 4 5 6 7 8 9 0 PAUSE PLAY SKIP Numeric buttons (p. 9) PAUSE button (p. 9) PLAY button (p. 8) SKIP buttons (p. 9) SEARCH INDEX STOP STOP button (p. 9) SEARCH buttons (p. 10) – OUTPUT LEVEL + SYNCHRO button (p. 19) SYNCHRO INDEX button (p. 14) OUTPUT LEVEL buttons (p. 11) 7  This manual describes how to operate this unit by using the remote control transmitter. To operate this unit on the front panel, use the corresponding buttons on the front panel. BASIC OPERATION 2, 3 OPEN/CLOSE PROG TAPE SPACE S/F POWER 1 DIMMER TIME CLEAR PEAK RANDOM REPEAT AUTO DISPLAY OFF +10 1 2 3 4 5 6 7 8 9 0 SKIP PAUSE PLAY SEARCH INDEX STOP 4 – OUTPUT LEVEL + SYNCHRO 1 3 Close the disc tray. POWER OPEN/CLOSE 2 Label side upward 4 OPEN/CLOSE PLAY Disc tray Play will begin from the first track of the disc. Display information at disc play ➀ Notes ➁ ➂ • After closing the disc tray by pressing the OPEN/CLOSE button, the display shows the total number of tracks and the total recorded time of the disc for a few seconds. SINGLE TOTAL 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 ➃ ➀ ➁ ➂ ➃ Shows the track number selected or being played. Shows the time displays. (Refer to “Selecting time displays” on page 10.) CDX-580 and CDX-480 only Shows the level of signals output into an amplifier or the headphone level adjusted by using the OUTPUT LEVEL buttons. Displays the numbers that correspond to the numbers of tracks (as high as number 20) on the disc. After each track is played, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance. To turn off the power 8 Press the POWER button again. • Additionally, you can close the disc tray by pressing the PLAY (PLAY/PAUSE) button, a numeric button or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the disc.  To stop play temporarily To stop play completely STOP PAUSE To resume play, press the PAUSE button again (or press the PLAY button). * The PLAY/PAUSE button on the front panel can also be used to stop play temporarily or to resume play. To play a desired track on the disc DIRECT PLAY SKIP PLAY Select a desired track using the numeric button. To play from the beginning of the track following the one now playing SKIP 5 To play from the beginning of the track now playing SKIP The selected track number is displayed To play from the beginning of the track before the one now playing 1 2 3 4 5 6 7 8 9 Example: To select track 25 Press ➀ twice, then immediately press ➁ once. 10 ➀ SKIP (twice) 5 ➁ • • * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played. • These operations can also be performed when the unit is in the pause or stop mode. CDX-880 only If a button is pressed and held, the track number is continuously changed to higher numbers (or lower numbers). CDX-580 and CDX-480 only When using the SKIP buttons on the remote control transmitter: If a button is pressed and held, the track number is continuously changed to higher numbers (or lower numbers). When using the SKIP/SEARCH button on the front panel: Be careful not to press and hold the button, otherwise the selected track is played forward (or backward) rapidly. 9  To advance or reverse play rapidly (MANUAL SEARCH) • To advance rapidly SEARCH (Press and hold.) • • To reverse rapidly SEARCH The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. Manual search can also be performed while disc play is paused, though no sound will be heard. CDX-580 and CDX-480 only When using the SKIP/SEARCH button on the front panel: Be careful not to release the button just after it is pressed, otherwise the play is skipped to the beginning of the next track or returned to the beginning of the track. (Press and hold.) Automatic spacing When you are recording a disc onto tape, and if the tracks on the disc are recorded with an insufficient time space between them, the tape deck will not be able to perform blank search operations correctly. In this case, a deck search mistake can be prevented by pressing the auto-SPACE button to insert spaces of about 4 seconds between the recorded tracks. Note When the automatic spacing function is in effect, the display of the total time and of the total remaining time will include each of the 4 second non-recorded intervals placed between tracks. To cancel the automatic spacing function SPACE SPACE “SPACE” goes off from the display. SPACE Selecting time displays You can select any of the four time displays by pressing the TIME display mode-select button. ➀ ➃ Elapsed time of the track now playing Total remaining time on the disc TOTAL REMAIN 2 3 4 5 6 7 8 9 10 11 12 2 3 4 5 6 7 8 9 10 11 12 TIME ➁ ➂ Remaining time of the track now playing Total disc play time TOTAL REMAIN 2 3 4 5 6 7 8 9 10 11 12 2 3 4 5 6 7 8 9 10 11 12 Note The remaining time ➁ will not be displayed if the track number is 25 or higher. 10  Changing brightness of the display CDX-880, CDX-580 You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button. During play During stopped or paused Normal illumination Normal illumination DIMMER Dim Dim Dim (The AUTO DISPLAY OFF indicator lights up. In this state, if a disc is played, the display illumination will be turned off.) “OFF” * While the display illumination is off, the AUTO DISPLAY OFF indicator on the front panel is illuminated. AUTO DISPLAY OFF Normal illumination CDX-480 If desired, you can change brightness of the display in three degrees by pressing the DIMMER button. DIMMER Slightly dim Dim When you listen with headphones Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL buttons. At that time, note that this adjustment will also vary the signal level output to the amplifier. PHONES – OUTPUT LEVEL + CDX-880 only * If the FIXED (LINE OUT) terminals on the rear of this unit are connected to the amplifier etc., the use of the OUTPUT LEVEL buttons does not vary the signal level output to the amplifier. Open/close the control door CDX-880 only When it is not necessary to operate controls inside the control door, close the door. To close the door To open the door 11  RANDOM-SEQUENCE PLAY You can have the unit play the tracks on a disc in a random sequence selected by the unit’s microcomputer. Notes • This feature will not function during programming, or during programmed play. To perform random-sequence play • If the POWER is switched off when the random-sequence play mode is functioning, when the POWER is switched on again, the unit will begin the random-sequence play automatically. (This feature is available for timer play.) • If the SKIP button is pressed during random-sequence play, the next randomly programmed track will be played. If the SKIP button is pressed, play will return to the beginning of the track now being played. RANDOM To cancel random-sequence play • This indication appears while the unit is mixing up tracks. STOP RANDOM • or Total remaining time on the disc will not be displayed during random-sequence play. REPEAT PLAY You can play any desired track or the entire disc repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. (OFF) S/F REPEAT SINGLE REPEAT FULL REPEAT 12 SINGLE (S) REPEAT A single track is repeatedly played. * This is also available in the programmed-play mode and the random-sequence play mode. (If the repeat play mode is switched off, the programmedplay mode or the random-sequence play mode will be resumed. FULL (F) REPEAT All tracks (the entire disc) are played repeatedly. * In the programmed-play mode, all programmed tracks are repeatedly played. * In the random-sequence play mode, all randomly sequenced tracks are repeatedly played in the same order.  PROGRAM PLAY You can enjoy listening to your favorite tracks in any desired order using programmed play. As many as 25 tracks can be programmed. OPEN/CLOSE 2 PROG TAPE SPACE S/F DIMMER TIME CLEAR PEAK RANDOM REPEAT +10 1 2 3 4 5 6 7 8 9 0 SKIP PAUSE PLAY SEARCH INDEX STOP – OUTPUT LEVEL + 3 4 1 SYNCHRO 1 3 Select the desired track. Stop the unit. 5 STOP * Repeat this operation to program more tracks. You can select the same track again. 2 4 PLAY PROG PROGRAM TOTAL Display information during program play PROGRAM TOTAL ➀ ➁ ➂ PROGRAM TOTAL 1 2 3 4 5 6 ➃ ➀ ➁ ➂ ➃ Notes • In step 2, if “P-01” does not appear in the display, press the TIME display mode-select button. • If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks. To return to the previous display, press the TIME display mode-select button once again. and ) button can be used during • The SKIP ( playing, but only within the range of the programmed tracks. and ) button can be used during • The SEARCH ( playing to search through all tracks, including unprogrammed tracks. • The PAUSE mode can also be programmed (one time only), if so desired, by pressing the TAPE button instead of a numeric button. (In this case, “ B” is illuminated in the display.) • If, for a compact disc with 25 tracks or more, track number 25 or higher is programmed, the total time will disappear from the display. Shows the program number for the track to be set next. Shows the selected track number. Shows the total time of the tracks currently programmed. Shows only the numbers of programmed tracks. * If the total time becomes 100 minutes or more, the highest position of the figure will not be displayed. 13  To stop program play To check programmed data Press the STOP button. The first programmed track number will be displayed. To resume play, press the PLAY button. Play will begin from the beginning of the program. 1. 2. 3. If during program play, press the STOP button. Press the PROG button. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. To cancel a programmed setting There are several methods, as described below. • Press the STOP button or the CLEAR button while the unit is stopped. • Open the disc tray. • Switch off the power. To correct programmed data 1. Follow the procedure described in “To check programmed data”. Display the track number to be corrected by pressing the SKIP button. Press a numeric button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. After the correction has been completed, once again press the PROG button or the PLAY button. 2. 3. 4. INDEX SEARCH If the disc includes index numbers, play can be started from any desired index number. CLEAR PROG TAPE PEAK SPACE S/F 1 2 3 4 5 6 7 8 9 0 SKIP PAUSE PLAY SEARCH INDEX STOP RANDOM REPEAT 1 Select a track which has index numbers. 3 2 INDEX 3 Select the desired index number. 3 14 +10 1, 3 2 To cancel the index search function Press the INDEX button. Notes • Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if such index numbers are included. • If an index number is selected that is higher than any index number on that disc, play will start from the last index number point on the disc. • For some discs, play may begin slightly prior to the actual designated index point. • If the disc has no encoded index points, play will begin from the start of the selected track. • The index number can be designated only while the INDEX number display is illuminated.  TRACK PROGRAMMING FOR RECORDING TO TAPE This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. Automatic tape-programming n This is for recording only the tracks which best fit onto a tape. OPEN/CLOSE 3 2 DIMMER CLEAR TIME PROG TAPE SPACE S/F PEAK 1 2 3 4 5 6 7 8 9 0 SKIP PAUSE PLAY SEARCH INDEX STOP RANDOM REPEAT 7 +10 – OUTPUT LEVEL + SYNCHRO 1 5 4 6, 7 1 5 Stop the unit. S/F REPEAT STOP * By pressing the REPEAT button, the unit automatically programs tracks for side A and side B separately considering the tape’s total time. * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 18.) 6 Begin recording on the tape deck and press the PLAY button on this unit at the same time. 2 Ifspace desired, you can automatically insert additional time between tracks. (Refer to page 10.) 7 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. SPACE SPACE Notes • All tracks may not be programmed if the tape’s length is not enough. To program all tracks, use a longer tape. • In step 5, you can check the program data for side A and side B. 3 Enter the tape’s total possible recording time. TAPE ➀ ➁ PROGRAM A You can select any of four tape lengths by pressing the TAPE button. TAPE ➂ (off) ➀ 4 Otherwise, you can also enter the tape’s total possible recording time manually. Example: For a C-64 tape (32 minutes on each side) 6 4 TOTAL 1 2 3 4 5 ➁ ➂ ➃ • ➃ Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. Shows the total time of programmed tracks for each side. Shows the side of the tape. Shows the programmed track numbers for each side. CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 6 and 7, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 19.) 15  n Manual tape-programming This is for recording desired tracks in any desired order onto a tape. OPEN/CLOSE 2 DIMMER TIME CLEAR PEAK PROG TAPE SPACE S/F 1 2 3 4 5 6 7 8 9 0 SKIP PAUSE PLAY SEARCH INDEX STOP 4 RANDOM REPEAT 7 +10 3, 5 6, 7 – OUTPUT LEVEL + SYNCHRO 1 5 Select the track numbers (to be recorded on side B) in the desired order. Follow steps 1 – 4 on page 15. 2 1 2 3 4 5 6 7 8 9 + 10 0 PROG PROGRAM TOTAL REMAIN A 6 Begin recording on the tape deck and press the PLAY button on this unit at the same time. 1 2 3 4 5 6 7 8 9 10 11 12 3 Select the track numbers (to be recorded on side A) in the desired order. 1 2 3 4 5 6 7 8 9 + 7 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, 10 at the same time, press the PLAY or PAUSE button on this unit. 0 * Programmed track numbers are illuminated on the display. You can select a track which can be programmed for the remaining time of (the side of) the tape from track numbers flashing on the display, but you cannot select any darkened track number. 4 When track selection for side A is finished, press the TAPE button. TAPE Notes • If, in step 3 or 5, “E rr” appears in the display, the track number just selected cannot be programmed because there is not enough time remaining on the tape. However, at this time, if any other track number is flashing continuously in the display, you can program it instead of the unprogrammable one. • In step 3 or 5, each time a selection is made, the track number and the tape’s remaining time will be displayed, and then the display will change to indicate the number of the next program. • CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 6 and 7, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 19.) A pause mode is programmed. Notes on tape programming • To check, cancel or correct program data, refer to page 14. * In checking the program data, note that “Pu” appears between track numbers for side A and side B. • Up to a maximum of 25 tracks can be programmed. If, however, the PAUSE mode is inserted, it is counted as one track. 16 • This function can be used to program up to track number 24. If the disc has more than 24 tracks, track number 25 and thereafter will not be programmed.  n Random sequential tape-programming The unit will automatically program tracks in random sequential order for recording to tape. OPEN/CLOSE DIMMER TIME CLEAR PEAK PROG TAPE SPACE S/F 1 2 3 4 5 6 7 8 9 0 SKIP PAUSE PLAY SEARCH INDEX STOP RANDOM 2 REPEAT 4 +10 3, 4 – OUTPUT LEVEL + SYNCHRO 1 Follow steps 1 – 4 on page 15. 2 RANDOM Notes • Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly. • If the tape’s length is not enough, all tracks cannot be programmed. In this case, exchange the tape for a longer one. • In step 2, you can check the program data for side A and side B. ➀ * The unit will automatically program tracks for side A and side B separately considering the tape’s total time. PROGRAM A the same time, press the PLAY or PAUSE button on this unit. TOTAL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 3 Begin recording on the tape deck and press the PLAY button on this unit at the same time. 4 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at ➁ ➀ ➁ ➂ ➃ • ➂ ➃ Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. Shows the total time of programmed tracks for each side. Shows the side of the tape. Shows the programmed track numbers for each side. CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 3 and 4, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 19.) 17  Automatic searching of the peak level on a disc This convenient feature automatically searches for the part on a disc where the source level peaks, and next plays the part repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck. OPEN/CLOSE PROG TAPE SPACE S/F DIMMER TIME CLEAR PEAK RANDOM 2 REPEAT +10 1 2 3 4 5 6 7 8 9 0 SKIP PAUSE PLAY SEARCH INDEX STOP – OUTPUT LEVEL + 1 SYNCHRO 1 To cancel this function Press the STOP button. (Some other buttons can also be used to cancel this function.) Stop the unit. STOP Notes • Even if the peak level searching is performed twice or more on the same disc, the same part will not be always selected, because this unit will search for the peak level among parts on the disc that are randomly selected by the internal microcomputer. • In the program play mode, this feature will function among the programmed tracks only. If program play is being performed, first press the STOP button, and then press the PEAK button. If program play is not being performed, only press the PEAK button. 2 PEAK PEAK The peak level searching is performed through the disc. PEAK REPEAT 1 2 3 4 5 6 7 8 9 10 11 12 PEAK REPEAT 1 2 3 4 5 6 7 8 9 10 11 12 Next, the part where the source level peaks is repeatedly played. Adjust the recording level on the tape deck listening to this repeat play. 18  CD SYNCHRONIZED RECORDING This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely. This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote control transmitter at the same time. 1 OPEN/CLOSE DIMMER TIME CLEAR PEAK PROG TAPE SPACE S/F 1 2 3 4 5 6 7 8 9 0 SKIP PAUSE PLAY SEARCH INDEX STOP RANDOM REPEAT 4 3 1 +10 4 5 – OUTPUT LEVEL + SYNCHRO 4 Load the disc. If necessary, select the desired track. SKIP OPEN/CLOSE 5 or 2 5 Load a tape on the tape deck. * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 18.) PLAY 3 Both CD play and tape deck recording begin. * CD play begins a little later than recording. 6 SYNCHRO If you want to stop recording temporarily and restart recording from a desired track, follow steps 3–5 again. To cancel this function This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit flashes on and off. Press the STOP button. Notes • To finish or stop the recording, make proper operations on the tape deck. • Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 13–14 for the programming procedure.) • This function can also be used together with the automatic tape-programming function. (Refer to page 15–17.) 19  NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Remote control transmitter operation range Battery installation 1 3 Remote control sensor 2 Within approximately 7 m (23 feet) Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes • Use only AA, R6, UM-3 batteries for replacement. • Be sure the polarities are correct. (See the illustration inside the battery compartment.) • Remove the batteries if the remote control transmitter will not be used for an extended period of time. • If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. 30° 30° Notes • There should be no large obstacles between the remote control transmitter and the main unit. • If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting. NOTES ABOUT HANDLING COMPACT DISCS • This compact disc player is designed only for playing compact discs bearing the mark. Never attempt to load any other type of disc into the unit. The unit will also play 8-cm (3-inch) compact discs. • To remove a disc from its storage case, open the case and then press down at the center; with a finger through the center hole and the outer edges held as shown in the illustration, lift the disc out carefully. • Always handle the disc with care so that its surface is not scratched. • Compact discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center. ,,, , , • Do not try to clean the disc’s surface by using any type of disc cleaner, record spray, anti-static spray or liquid, or any other chemical-based liquid, because such substances might irreparably damage the disc’s surface. • Do not expose discs to direct sunlight, high temperature or high humidity for a long period of time, because these might warp or otherwise damage the disc. No! • Compact discs are not subjected to wear during play, but damage to the disc surface when the disc is being handled can adversely affect the disc’s play. To play a 8-cm (3-inch) CD Place it in the inner recessed area of the disc tray. Do not put a normal (12-cm/5-inch) CD on top of a 8-cm CD. 20  TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM The player does not switch ON when the POWER switch is pressed. The disc tray does not close completely. PROBABLE CAUSE The power cord is not connected or not completely connected. A foreign object is obstructing the tray. REMEDY Securely connect the power cord. Play does not begin. The disc is damaged. Check the disc carefully; replace it if necessary. Wait 20 to 30 minutes after switching the unit ON before trying to play a disc. There is moisture on the laser pickup. Play is delayed, or begins at the wrong place. No sound. The disc has been loaded upside down. The disc is dirty. Reload the disc with the label side up. Clean the disc. The disc may be scratched or damaged. Check the disc carefully; replace it if necessary. Connect the cables properly. If the problem persists, the cables may be defective. Set the amplifier controls to the correct input selection. Relocate the player. Improper output cable connections. Improper amplifier operation. Sound “skips”. Sound “hums”. Noise from a nearby tuner. Noise from inside of the disc tray. The remote control transmitter does not work. Carefully check the disc tray and remove the foreign object. The player is being subjected to vibrations or impacts. The disc is dirty. Improper cable connections. The tuner is too close to the player. The disc may be warped. The batteries of this remote control transmitter are too weak. Direct sunlight or lighting (of an inverter type of flourescent lamp etc.) is striking the remote control sensor of the main unit. Clean the disc. Securely connect the audio cables. If the problem persists, the cables may be defective. Move the tuner and player farther apart. Replace the disc. Replace the batteries with new ones. Change position of the main unit. SPECIFICATIONS AUDIO SECTION GENERAL Frequency response <CDX-880> .................................. 2 Hz 1 20 kHz, 50.3 dB <CDX-580, CDX-480> .................. 2 Hz 1 20 kHz, 50.5 dB Harmonic distortion + noise <CDX-880> .................................................. 0.002% (1 kHz) <CDX-580> ................................................ 0.0025% (1 kHz) <CDX-480> .................................................. 0.003% (1 kHz) S/N ratio <CDX-880> ............................................................... 118 dB <CDX-580> ............................................................... 115 dB <CDX-480> ............................................................... 105 dB Dynamic range <CDX-880, CDX-580> ................................................ 98 dB <CDX-480> ................................................................. 95 dB Wow & flutter ................................................... Unmeasurable Output voltage <CDX-880> VARIABLE ............................................... 2.0 50.5V max. FIXED ................................................................ 2.0 50.5V <CDX-580, CDX-480> VARIABLE ............................................... 2.0 50.5V max. Headphones output (120 dB) ........... 200540 mV/150 ohms Power requirements U.S.A. and Canada models ........................... 120V, 60 Hz Australia and U.K. models ............................ 240V, 50 Hz Europe model .................................................230V, 50 Hz General model ..................... 110/120/220/240V, 50/60 Hz Power consumption ........................................................ 20W Dimensions (W x H x D) <CDX-880> ............................................ 435 x 96 x 281 mm (17-1/8” x 3-3/4” x 11-1/16”) <CDX-580, CDX-480> ........................... 435 x 96 x 270 mm (17-1/8” x 3-3/4” x 10-5/8”) Weight <CDX-880> ............................................. 4 kg (8 lbs. 13 oz.) <CDX-580, CDX-480> ........................... 3.8 kg (8 lbs. 6 oz.) Accessories ................................................... Connection cord Remote control transmitter Batteries (size AA, R6, UM-3) Please note that all specifications are subject to change without notice. 21  YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA VR 10040