Yamaha RX-V500DOwner de handleiding

Categorie
Auto media-ontvangers
Type
de handleiding

Deze handleiding is ook geschikt voor

English
Read the supplied booklet “Safety Brochure” before using the unit.
AV Receiver
Owner’s Manual
En 2
CONTENTS
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
FEATURES 5
What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PREPARATIONS 11
General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1 Placing speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5.1-channel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Connecting audio devices (such as CD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Connecting to the jacks on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5 Connecting the DAB/FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6 Connecting to a network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
7 Connecting recording devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
8 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
9 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 29
10 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . 30
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
PLAYBACK 34
Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Selecting the input source and favorite settings with one touch
(SCENE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Enjoying sound field effects (CINEMA DSP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Enjoying pure high fidelity sound (direct playback) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . . 41
Enjoying surround sound with headphones (SILENT CINEMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Listening to DAB radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Preparing the DAB tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Selecting a DAB radio station for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Registering favorite DAB radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Displaying the DAB information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Checking reception strength of each DAB channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Listening to FM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Registering favorite FM radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Playing back iPod music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Playback of iPod content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
En 3
Playing back music stored on a USB storage device . . . . . . . . . . . . . . . 54
Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 57
Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Playback of PC music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Playing back iTunes/iPod music via a network (AirPlay) . . . . . . . . . . . 62
Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Viewing the current status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Switching information on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Configuring playback settings for different playback sources
(Option menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
CONFIGURATIONS 69
Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . . 69
Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
ECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Configuring the system settings (ADVANCED SETUP menu) . . . . . . . . 84
ADVANCED SETUP menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Selecting the remote control ID (REMOTE ID) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Switching the video signal type (TV FORMAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Restoring the default settings (INIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Updating the firmware (UPDATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Checking the firmware version (VERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Controlling external devices with the remote control . . . . . . . . . . . . . 86
Registering the remote control code for a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Registering the remote control codes for playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Resetting remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Updating the unit’s firmware via the network . . . . . . . . . . . . . . . . . . . . 89
APPENDIX 90
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
DAB radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
FM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
USB and network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
HDMI and video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Yamaha technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Reference diagram (rear panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Accessories En 4
Accessories
Check that the following accessories are supplied with the product.
Remote control Batteries (AAA, R03, UM-4) (x2)
DAB/FM antenna YPAO microphone
Easy Setup Guide Safety Brochure
CD-ROM (Owner’s Manual)
Insert the batteries the right
way round.
Operating range of the remote control
Point the remote control at the remote control sensor on the unit and remain within the operating range
shown below.
Some features are not available in certain regions.
Due to product improvements, specifications and appearance are subject to change without notice.
This manual explains operations using the supplied remote control.
This manual describes all the “iPod”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod”, “iPhone”
and “iPad”, unless otherwise specified.
indicates precautions for use of the unit and its feature limitations.
indicates supplementary explanations for better use.
30° 30°
Within 6 m (20 ft)
FEATURES What you can do with the unit En 5
FEATURES
What you can do with the unit
AV receiver (the unit)
Speakers
BD/DVD player
HDMI Control
Audio/Video
Audio/Video
(via HDMI or MHL)
TV remote control
Audio
HDMI Control
Audio
Audio/Video
TV
Sequential operation of a TV,
AV receiver, and BD/DVD
player (HDMI Control)
. p.101
Change the input source
and favorite settings with
one touch (SCENE)
. p.35
Wide variety of supported content
• iPod/iPhone/iPad
. p.50
•USB
. p.54
• Media server (PC/NAS)
. p.57
• Internet radio
. p.60
•AirPlay
. p.62
iPod/iPhone/iPad
USB device
Audio
Network contents
Supports 2- to 5.1-channel speaker system.
Allows you to enjoy your favorite acoustic spaces
in various styles.
• Automatically optimizing the speaker
settings to suit your room (YPAO)
. p.30
• Reproducing stereo or multichannel
sounds with the sound fields like
actual movie theaters and concert
halls (CINEMA DSP)
. p.37
• Enjoying compressed music with
enhanced sound (Compressed Music
Enhancer)
. p.41
3D and 4K signals supported
Smartphone/Tablet
Control
FEATURES What you can do with the unit En 6
Full of useful functions!
Connecting various devices (p.22)
A number of HDMI jacks and various input/output jacks
on the unit allow you to connect video devices (such as
BD/DVD players), audio devices (such as CD players),
game consoles, camcorders, and other devices.
Playing back TV audio in surround sound
with a single HDMI cable connection
(Audio Return Channel: ARC) (p.17)
When using an ARC -compatible TV, you only need one
HDMI cable to enable video output to the TV, audio input
from the TV, and the transmission of HDMI Control signals.
Easy operation and wireless music
playback from iPhone or Android device
By using the application for smartphone/tablet “AV
CONTROLLER”, you can control the unit from an
iPhone, iPad, iPod touch or Android devices. Visit the
Yamaha website for details.
Creating 3-dimensional sound fields (p.37)
The Virtual Presence Speaker (VPS) function allows you
to create a 3-dimensional sound field in your own room
(CINEMA DSP 3D).
Listening to DAB radio (p.42) and FM radio
(p.46)
The unit is equipped with a built-in DAB/FM tuner. You
can register up to 40 favorite radio stations each for
DAB and FM as presets.
Enjoying pure high fidelity sound (p.40)
When the direct playback mode is enabled, the unit
plays back the selected source with the least circuitry,
which lets you to enjoy Hi-Fi sound quality.
Easy operation with a TV screen
You can operate the iPod or USB storage device, view
information, or easily configure the settings using the
on-screen menu.
Low power consumption
The ECO mode (power saving function) reduces the
unit’s power consumption and helps to create an
eco-friendly home theater system (p.79).
BD/DVD
player
Game
console
Camcorder
TV
Set-top box
HDMI Control
TV audio
Video from
external device
Useful tips
The combination of video/audio input jacks does not
match an external device...
Use “Audio In” in the “Option” menu to change the
combination of video/audio input jacks so that it matches
the output jack(s) of your external device (p.24).
Video and audio are not synchronized...
Use “Lipsync” in the “Setup” menu to adjust the delay
between video and audio output (p.77).
I want to hear audio from the TV speakers...
Use “Audio Output” in the “Setup” menu to select the
output destination of signals input into the unit (p.75).
Your TV speakers may be selected as an output
destination.
I want to use the supplied remote control to operate
external devices…
Register the remote control codes of the external
devices (such as a TV and BD/DVD players) (p.86).
I want to change the on-screen menu language...
Use “Language” in the “Setup” menu to select a
language from English, Japanese, French, German,
Spanish, Russian, Italian and Chinese (p.29).
I want to update the firmware...
Use “Network Update” (p.89) in the “Setup” menu or
“UPDATE” (p.85) in the “ADVANCED SETUP” menu to
update the unit’s firmware.
Many other settings are available that let you to
customize the unit. For details, see the following pages.
SCENE settings (p.35)
Sound/video settings and signal information for each
source (p.65)
Various function settings (p.70)
System settings (p.84)
FEATURES Part names and functions En 7
Front panel
1 z (power) key
Turns on/off (standby) the unit.
2 Standby indicator
Lights up when the unit is in standby mode under any of the
following conditions.
HDMI Control is enabled (p.75)
Standby Through is enabled (p.75)
Network Standby is enabled (p.82)
An iPod is being charged (p.50)
3 YPAO MIC jack
For connecting the supplied YPAO microphone (p.30).
4 Remote control sensor
Receives remote control signals (p.4).
5 INFO key
Selects the information displayed on the front display (p.64).
6 MEMORY key
Registers DAB radio stations (p.43) or FM radio stations
(p.47) as preset stations.
7 PRESET keys
Select a preset DAB radio station (p.43) or a preset FM radio
station (p.48).
8 DAB and FM keys
Switch between DAB (p.42) and FM (p.46).
9 TUNING keys
Select a DAB radio station (p.42) or an FM radio frequency
(p.46)
0 Front display
Displays information (p.8).
A DIRECT key
Enables/disables the direct playback mode (p.40).
B PHONES jack
For connecting headphones.
C INPUT keys
Select an input source.
D TONE CONTROL key
Adjusts the high-frequency range and low-frequency range
of output sounds (p.66).
E SCENE keys
Select the registered input source and sound program with
one touch. Also, turns on the unit when it is in standby mode
(p.35).
F PROGRAM keys
Select a sound program or a surround decoder (p.36).
G STRAIGHT key
Enables/disables the straight decode mode (p.39).
H VIDEO AUX jacks
For connecting devices, such as camcorders and game
consoles (p.25).
I USB jack
For connecting a USB storage device (p.54) or an iPod
(p.50).
J VOLUME knob
Adjusts the volume.
Part names and functions
INFO
MEMORY
PRESET
FM DAB
TUNING
CONTROL
TV
BD
DVD
NET
RADIO
INPUT
SCENE
YPAO MIC
PHONES
SILENT
CINEMA
STRAIGHT
VIDEO
DIRECT
AUDIO
VIDEO
VOLUME
AUX
TONE
PROGRAM
5V 2.1A
4:A2 3561 789
B
JDFG
IHCE
FEATURES Part names and functions En 8
Front display (indicators)
1 HDMI
Lights up when HDMI signals are being input or output.
OUT
Lights up when HDMI signals are being output.
2 CINEMA DSP
Lights up when CINEMA DSP (p.37) is working.
CINEMA DSP n
Lights up when CINEMA DSP 3D (p.39) is working.
3 ENHANCER
Lights up when Compressed Music Enhancer (p.41) is
working.
4 ADAPTIVE DRC
Lights up when Adaptive DRC (p.66) is working.
5 STEREO
Lights up when the unit is receiving a stereo FM radio signal.
TUNED
Lights up when the unit is receiving an FM radio station
signal.
6 SLEEP
Lights up when the sleep timer is on.
7 MUTE
Blinks when audio is muted.
8 Volume indicator
Indicates the current volume.
9 Cursor indicators
Indicate the remote control cursor keys currently operational.
0 Information display
Displays the current status (such as input name and sound
mode name). You can switch the information by pressing
INFO (p.64).
A Speaker indicators
Indicate speaker terminals from which signals are output.
L Subwoofer
A Front speaker (L)
S Front speaker (R)
D Center speaker
F Surround speaker (L)
G Surround speaker (R)
SW
C
LR
SL SR
VOL.
MUTE
ENHANCER
ADAPTIVE DRC
STEREO
3
TUNED
SLEEP
OUT
12346785
9 9: A
FEATURES Part names and functions En 9
Rear panel
1 HDMI OUT jack
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p.17). When using ARC, TV audio signal
can also be input through the HDMI OUT jack.
2 HDMI 1–4 jacks
For connecting to HDMI-compatible playback devices and
inputting video/audio signals (p.22).
3 HDMI 5/MHL jack
For connecting to an HDMI- or MHL-compatible playback
device and inputting video/audio signals (p.22).
4 ANTENNA jacks
For connecting to the DAB/FM antenna (p.26).
5 NETWORK jack
For connecting to a network (p.27).
6 DC OUT jack
For supplying power to a Yamaha AV accessory. For details
on connections, refer to the instruction manual of the AV
accessory.
7 Power cable
For connecting to an AC wall outlet (p.28).
8 AV 1–6 jacks
For connecting to video/audio playback devices and
inputting video/audio signals (p.22).
9 AV OUT jacks
For outputting video/audio to a recording device (such as a
VCR) (p.28).
0 AUDIO jacks
For connecting to an audio playback device and inputting
audio signals (p.25).
A SUBWOOFER PRE OUT jack
For connecting to a subwoofer (with built-in amplifier) (p.14).
B MONITOR OUT jacks
COMPONENT VIDEO jacks:
For connecting to a TV that supports component video and
outputting video signals (p.21).
VIDEO jack:
For connecting to a TV that supports composite video and
outputting video signals (p.21).
C SPEAKERS terminals
For connecting to speakers (p.14).
FRONT CENTER SURROUND
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
COMPONENT
VIDEO
P
B
Y
VIDEO
AV
MONITOR OUT
OUT
AUDIO
AV 4
P
R
P
B
Y
P
R
NETWORK
ANTENNA
DAB/FM
75
SPEAKERS
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI 4
HDMI
OUT
ARC
(
RADIO
)
SUBWOOFER
PRE OUT
HDMI 5
MHL
DC OUT
5V 0.5A
5V 1A
(
NET
)
: ACB9
21
3 5 74 6
8
* The area around the video/audio output jacks is
marked in white on the actual product to
prevent improper connections.
FEATURES Part names and functions En 10
Remote control
1 Remote control signal transmitter
Transmits infrared signals.
2 SOURCE z key
Turns on/off an external device.
SOURCE/RECEIVER key
Changes the device (the unit or external device) that is
operated with the remote control (p.87). You can operate the
unit when this key lights up in orange, and an external device
when this key lights up in green.
RECEIVER z key
Turns on/off (standby) the unit.
3 Input selection keys
Select an input source for playback.
HDMI 1–4 HDMI 1–4 jacks
HDMI 5/MHL HDMI 5/MHL jack
AV 16 AV 1–6 jacks
V-AUX VIDEO AUX jack (on the front panel)
USB USB jack (on the front panel)
NET NETWORK jack (press repeatedly to select a
desired network source)
AUDIO AUDIO jacks
4 Radio keys
Operate the DAB radio (p.42) or FM radio (p.46).
FM Switches to FM radio.
DAB Switches to DAB radio.
MEMORY Registers DAB/FM radio stations as presets.
PRESET Select a preset DAB/FM radio station.
TUNING Select the DAB radio station or FM radio
frequency.
5 INFO key
Selects the information displayed on the front display (p.64).
6 Sound mode keys
Select a sound mode (p.36).
7 SLEEP key
Switches the unit to standby mode automatically after a
specified period of time has elapsed (sleep timer). Press
repeatedly to set the time (120 min, 90 min, 60 min, 30 min,
off).
8 SCENE keys
Select the registered input source and sound program with
one touch. Also, turns on the unit when it is in standby mode
(p.35).
9 SETUP key
Displays the setup menu (p.69).
0 Menu operation keys
Cursor keys Select a menu or a parameter.
ENTER Confirms a selected item.
RETURN Returns to the previous screen.
A MODE key
Switches between “Stereo” and “Mono” for FM radio
reception (p.46).
Switches the iPod operation modes (p.52).
B External device operation keys
Let you play back and select menus and perform other
operations for external devices (p.87).
C Numeric keys
Let you enter numerical values, such as FM radio
frequencies.
D TV operation keys
Let you select TV input and volume, and perform other TV
operations (p.86).
E CODE SET button
Registers remote control codes of external devices on the
remote control (p.86).
F /★★ keys
Change the external device to be controlled without
switching the input source (p.87).
G OPTION key
Displays the option menu (p.65).
H VOLUME keys
Adjust the volume.
I MUTE key
Mutes the audio output.
To operate external devices with the remote control, register a
remote control code for each device before using (p.86).
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
E
F
G
H
I
1
3
2
4
5
7
6
8
C
D
9
:
B
A
PREPARATIONS General setup procedure En 11
PREPARATIONS
This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!
General setup procedure
1 Placing speakers (p.12)
Select the speaker layout for the number of speakers that you are using and place them in your room.
2 Connecting speakers (p.14)
Connect the speakers to the unit.
3 Connecting a TV (p.17)
Connect a TV to the unit.
4 Connecting playback devices (p.22)
Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit.
5 Connecting the DAB/FM antenna (p.26)
Connect the supplied DAB/FM antenna to the unit.
6 Connecting to a network (p.27)
Connect the unit to a network.
7 Connecting recording devices (p.28)
Connect recording devices to the unit.
8 Connecting the power cable (p.28)
After all the connections are complete, plug in the power cable.
9
Selecting an on-screen menu language
(p.29)
Select the desired on-screen menu language (default: English).
10
Optimizing the speaker settings
automatically (YPAO) (p.30)
Optimize the speaker settings, such as volume balance and acoustic parameters, to suit your room
(YPAO).
PREPARATIONS Placing speakers En 12
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout
examples.
1 Placing speakers
Caution
Use speakers with an impedance of at least 6 .
Speaker type Abbr. Function
Speaker system (the number of channels)
5.1 4.1 3.1 2.1
Front (L) 1
Produce front right/left channel sounds (stereo sounds).
●●●●
Front (R) 2 ●●●●
Center 3 Produces center channel sounds (such as movie dialogue and vocals). ●●
Surround (L) 4
Produce surround right/left channel sounds.
●●
Surround (R) 5 ●●
Subwoofer 9
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”.
●●●●
1
Speaker placement
2 3 4 5 6 7 8 9 10
PREPARATIONS Placing speakers En 13
5.1-channel system
4.1-channel system
3.1-channel system
2.1-channel system
45
12
39
10° to 30°10° to 30°
45
12
9
10° to 30°10° to 30°
12
39
12
9
1
Speaker placement
2 3 4 5 6 7 8 9 10
PREPARATIONS Connecting speakers En 14
Connect the speakers placed in your room to the unit. The following diagrams provide
connections for 5.1- system as examples. For other systems, connect speakers while
referring to the connection diagram for the 5.1-channel system.
Cables required for connection
(commercially available)
Speaker cables (x the number of speakers)
Audio pin cable (x1: for connecting a subwoofer)
5.1-channel system
2 Connecting speakers
Caution
Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the
speakers.
Ensure that the core wires of the speaker cable do not touch one another or come into contact with the
unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit,
“Check SP Wires” will appear on the front display when the unit is turned on.
FRONT CENTER SURROUND
OR OUT
P
B
Y
SPEAKERS
SUBWOOFER
PRE OUT
12
3
45
9
The unit (rear)
1 2
Speaker connections
3 4 5 6 7 8 9 10
PREPARATIONS Connecting speakers En 15
Connecting speaker cables
Speaker cables have two wires. One is for connecting the negative (-) terminal of the
unit and the speaker, and the other is for the positive (+) terminal. If the wires are
colored to prevent confusion, connect the black wire to the negative and the other wire
to the positive terminal.
a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and
twist the bare wires of the cable firmly together.
b Loosen the speaker terminal.
c Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the
terminal.
d Tighten the terminal.
Using a banana plug
(Australia model only)
a Tighten the speaker terminal.
b Insert a banana plug into the end of the terminal.
Connecting the subwoofer (with built-in amplifier)
Use an audio pin cable to connect the subwoofer.
FRONT
aa
b
d
c
+ (red)
- (black)
FRONT
a
b
Banana plug
PRE OUT
SUBWOOFER
AUDIO
MONITOR OUT
Y
AV
OUT
AV6
Audio pin cable
1 2
Speaker connections
3 4 5 6 7 8 9 10
PREPARATIONS Input/output jacks and cables En 16
Video/audio jacks
HDMI jacks
Transmit digital video and digital sound through a single
jack. Use an HDMI cable.
Use a 19-pin HDMI cable with the HDMI logo. We recommend using
a cable less than 5.0 m (16.4 ft) long to prevent signal quality
degradation.
The unit’s HDMI jacks support the HDMI Control, Audio Return
Channel (ARC), and 3D and 4K video transmission (through output)
features.
Use high speed HDMI cables to enjoy 3D or 4K videos.
HDMI/MHL jack
Transmit digital video and digital sound. Use an MHL
cable.
The HDMI 5/MHL jack of the unit supports both HDMI and MHL
connections. Use a cable that matches the jack on your
MHL-compatible mobile device. When connecting an
HDMI-compatible playback device to the jack, use an HDMI cable.
For details on an MHL connection, see “MHL connection” (p.22).
Video jacks
COMPONENT VIDEO jacks
Transmit video signals separated into three
components: luminance (Y), chrominance blue (P
B),
and chrominance red (P
R). Use a component video
cable with three plugs.
VIDEO jacks
Transmit analog video signals. Use a video pin cable.
Audio jacks
OPTICAL jacks
Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.
COAXIAL jacks
Transmit digital audio signals. Use a digital coaxial
cable.
AUDIO jacks
(Stereo L/R jacks)
Transmit analog stereo audio signals. Use a stereo pin
cable (RCA cable).
(Stereo mini jack)
Transmits analog stereo audio signals. Use a stereo
mini-plug cable.
Input/output jacks and cables
HDMI cable
HDMI 5
5V
MHL
1A
MHL cable
Component video cable
Video pin cable
AV 4
OPTICAL
(
TV
)
Digital optical cable
Digital coaxial cable
Stereo pin cable
Stereo mini-plug cable
PREPARATIONS Connecting a TV En 17
Connect a TV to the unit so that video input to the unit can be output to the TV.
You can also enjoy playback of TV audio on the unit.
The connection method varies depending on the functions and video input jacks
available on your TV.
Refer to the instruction manual of the TV and choose a connection method.
Connection Method 1 (HDMI Control/ARC-compatible TV)
Connect the TV to the unit with an HDMI cable.
The following explanation is based on the assumption that you have not changed the “HDMI” parameters
(p.75) in the “Setup” menu.
Use an HDMI cable that supports ARC.
By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
3 Connecting a TV
When connecting a video device with an analog video output
If you will connect any video device to the AV 1–2 (COMPONENT VIDEO) jacks of the unit, you also
need to connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks (p.21).
If you will connect any video device to the AV 3–6 (VIDEO) jacks or the VIDEO AUX (VIDEO) of the
unit, you also need to connect the TV to the MONITOR OUT (VIDEO) jack (p.21).
When using a set-top box to watch TV
Connect the set-top box to the unit in the same way as playback devices (p.22). If you will receive TV
broadcasts only from the set-top box, you do not need to make an audio cable connection between the
TV and the unit or configure the ARC setting.
Does your TV support
Audio Return Channel (ARC)?
Does your TV support
HDMI Control?
Does your TV have an
HDMI input jack?
Connection Method 3 (p.20)
Connection Method 2 (p.19)
Connection Method 1 (p.17)
Connection Method 4 (p.21)
Yes
Yes
Yes
No
No
No
About HDMI Control
HDMI Control allows you to operate external devices via HDMI. If you connect a TV
that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control. You can also control playback
devices (such as an HDMI Control-compatible BD/DVD player) connected to the
unit with an HDMI cable. For details, see “HDMI Control” (p.101).
About Audio Return Channel (ARC)
ARC allows audio signals to travel both ways under HDMI Control. If you connect a
TV that supports HDMI Control and ARC to the unit with a single HDMI cable, you
can output video/audio to the TV or input TV audio to the unit.
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
P
B
Y
VIDEO
AV 4
P
R
ANTEN
N
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDM
HDMI
OUT
ARC
(
RADIO
)
ARC
HDMI
HDMI
HDMI
OUT
HDMI
ARC
HDMI OUT jack
HDMI input
(ARC-compatible)
The unit (rear)
TV
1 2 3
TV connection
4 5 6 7 8 9 10
PREPARATIONS Connecting a TV En 18
Necessary settings
To use HDMI Control and ARC, you need to configure the following settings.
For details on settings and operating your TV, refer to the instruction manual for the TV.
1
After connecting external devices (such as a TV and playback devices)
and the power cable to the unit, turn on the unit, TV, and playback devices.
2
Configure the settings of the unit.
a Check that ARC is enabled on the TV.
b Switch the TV input to display video from the unit.
c Press SETUP.
d Use the cursor keys to select “HDMI” and press ENTER.
e Press ENTER again.
f Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys (e/r) to
select “On” as shown below.
g Press SETUP.
3
Configure the settings for HDMI Control.
a Enable HDMI Control on the TV and playback devices (such as HDMI
Control-compatible BD/DVD player).
b Turn off the TV’s main power and then turn off the unit and playback devices.
c Turn on the unit and playback devices and then turn on the TV’s main power.
d Switch the TV input to display video from the unit.
e Check the following.
On the unit: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV: The video from the playback device is displayed.
f Check that the unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
This completes the necessary settings.
If you select a TV program with the TV remote control, the input source of the unit will be
automatically switched to “AV 4” and the TV audio will be played back on the unit.
If you cannot hear the TV’s audio, check that “ARC” (p.76) in the “Setup” menu is set to
“On”.
If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again)
the devices. It may solve the problem.
If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
If the audio is interrupted while using ARC, set “ARC” (p.76) in the “Setup” menu to “Off” and use a digital
optical cable to input TV audio to the unit (p.19).
“AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks,
use “TV Audio Input” (p.75) in the “Setup” menu to change the TV audio input assignment. To use the
SCENE function (p.35), you also need to change the input assignment for SCENE(TV).
RETURN
VOLUME
ENTER
TOP
POP UP
DISPLAY
OPTION
SETUP
RETURN
V
O
LUME
TO
P
POP UP
DI
S
P
L
AY
O
PTI
O
N
SETUP
Cursor keys
ENTER
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
Configuration
Configuration
HDMI Control
Audio Output
Standby Through
TV Audio Input
Standby Sync
ARC
SCENE
On
Auto
Auto
AV4
Auto
On
Back: RETURN
1 2 3
TV connection
4 5 6 7 8 9 10
PREPARATIONS Connecting a TV En 19
Connection Method 2 (HDMI Control-compatible TV)
Connect the TV to the unit with an HDMI cable and a digital optical cable.
The following explanation is based on the assumption that you have not changed the “HDMI” parameters
(p.75) in the “Setup” menu.
By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
Necessary settings
To use HDMI Control, you need to configure the following settings.
For details on settings and operating your TV, refer to the instruction manual for the TV.
1
After connecting external devices (such as a TV and playback
devices) and power cable of the unit, turn on the unit, TV, and
playback devices.
2
Configure the settings of the unit.
a Switch the TV input to display video from the unit.
b Press SETUP.
c Use the cursor keys to select “HDMI” and press ENTER.
d Press ENTER again.
e Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys (e/r) to
select “On” as shown below.
f Press SETUP.
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
P
B
Y
VIDEO
A
O
AV 4
P
R
ANTENNA
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI
OUT
ARC
(
RADIO
)
HDMI
HDMI
HDMI
AV 4
(
TV
)
OPTICAL
OPTICAL
OO
HDMI
OUT
ARC
The unit (rear) HDMI OUT jack
AV 4 (OPTICAL) jack
Audio output
(digital optical)
TV
HDMI input
RETURN
VOLUME
ENTER
TOP
POP UP
DISPLAY
OPTION
SETUP
RETURN
V
O
LUME
TO
P
POP UP
DI
S
P
L
AY
O
PTI
O
N
SETUP
Cursor keys
ENTER
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
Configuration
Configuration
HDMI Control
Audio Output
Standby Through
TV Audio Input
Standby Sync
ARC
SCENE
On
Auto
Auto
AV4
Auto
On
Back: RETURN
1 2 3
TV connection
4 5 6 7 8 9 10
PREPARATIONS Connecting a TV En 20
3
Configure the settings for HDMI Control.
a Enable HDMI Control on the TV and playback devices (such as a HDMI
Control-compatible BD/DVD player).
b Turn off the TV’s main power and then turn off the unit and playback devices.
c Turn on the unit and playback devices and then turn on the TV.
d Switch the TV input to display video from the unit.
e Check the following.
On the unit: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV: The video from the playback device is displayed.
f Check that the unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
This completes the necessary settings.
If you select a TV program with the TV remote control, the input source of the unit will be
automatically switched to “AV 4” and the TV audio will be played back on the unit.
If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again)
the devices. It may solve the problem.
If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
“AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks or
if you want to use another input jack (other than OPTICAL) for connecting the TV, use “TV Audio Input”
(p.75) in the “Setup” menu to change the TV audio input assignment. To use the SCENE function (p.35),
you also need to change the input assignment for SCENE(TV).
Connection Method 3 (TV with HDMI input jacks)
Connect the TV to the unit with an HDMI cable and a digital optical cable.
If you switch the input source of the unit to “AV 4” using the AV 4 or SCENE(TV) keys,
the TV audio will be played back on the unit.
By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV 1–6 and AUDIO jacks. To use the
SCENE function (p.35), you also need to change the input assignment for SCENE(TV).
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
P
B
Y
VIDEO
A
O
AV 4
P
R
ANTENNA
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI
OUT
ARC
(
RADIO
)
HDMI
HDMI
HDMI
AV 4
(
TV
)
OPTICAL
OPTICAL
OO
HDMI
OUT
ARC
The unit (rear) HDMI OUT jack
AV 4 (OPTICAL) jack
Audio output
(digital optical)
TV
HDMI input
1 2 3
TV connection
4 5 6 7 8 9 10
PREPARATIONS Connecting a TV En 21
Connection Method 4 (TV without HDMI input jacks)
When connecting any video device to the AV 1–2 (COMPONENT VIDEO) jacks of the
unit, connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks.
When connecting any video device to the AV 3–6 (VIDEO) jacks or the VIDEO AUX
(VIDEO) jack of the unit, connect the TV to the MONITOR OUT (VIDEO) jack.
If you select “AV 4” as the input source by pressing AV 4 or SCENE(TV), the TV audio
will be played back on the unit.
If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV.
Operations with TV screen are available only when your TV is connected to the unit via HDMI.
If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV 1–6 and AUDIO jacks. To use the
SCENE function (p.35), you also need to change the input assignment for SCENE(TV).
COMPONENT VIDEO connection (with a component video cable)
VIDEO (composite video) connection (with a video pin cable)
AV 2
AV 3
AV 5
AV 6
COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
VIDEO
AV
MONITOR OUT
OUT
AUDIO
AV 4
P
B
Y
P
R
ANTENNA
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI 4
UT
(
RADIO
)
SUBWOOFER
PRE OUT
HDMI 5
MHL
5V 1A
AV 4
(
TV
)
OPTICAL
OPTICAL
PR
PB
Y
COMPONENT
VIDEO
OO
P
R
P
B
Y
P
R
P
B
Y
COMPONENT
VIDEO
MONITOR OUT
PR
PB
Y
The unit (rear)
MONITOR OUT
(COMPONENT VIDEO) jacks
Video input
(component video)
AV 4 (OPTICAL) jack
Audio output
(digital optical)
TV
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
COMPONENT
VIDEO
P
B
Y
VIDEO
AV
MONITOR OUT
OUT
AUDIO
AV 4
P
R
P
B
Y
P
R
ANTENNA
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI 4
HDMI
OUT
ARC
(
RADIO
)
SUBWOOFER
PRE OUT
HDMI 5
MHL
5V
VIDEO
V
V
AV 4
(
TV
)
OPTICAL
OPTICAL
OO
MONITOR OUT
The unit (rear)
MONITOR OUT
(VIDEO) jack
Video input
(composite video)
Audio output
(digital optical)
TV
AV 4 (OPTICAL) jack
1 2 3
TV connection
4 5 6 7 8 9 10
PREPARATIONS Connecting playback devices En 22
The unit is equipped with a variety of input jacks including HDMI input jacks to allow
you to connect different types of playback devices. For information on how to connect
an iPod or a USB storage device, see the following pages.
Connecting an iPod (p.50)
Connecting a USB storage device (p.54)
Connecting video devices (such as BD/DVD players)
Connect video devices such as BD/DVD players, set-top boxes (STBs) and game
consoles to the unit. Depending on the video/audio output jacks available on your video
device, choose one of the following connections. We recommend using an HDMI
connection if the video device has an HDMI output jack.
If the combination of video/audio input jacks available on the unit does not match your video device, change
its combination according to the output jacks of your device (p.24).
HDMI connection
Connect a video device to the unit with an HDMI cable.
If you select the input source by pressing HDMI 1–5, the video/audio played back on
the video device will be output from the unit.
To watch videos input to the HDMI 1–5 jacks, you need to connect your TV to the HDMI OUT jack of the
unit (p.17 to 20).
MHL connection
Connect an MHL-compatible mobile device (such as smartphones) to the unit with an
MHL cable. You can enjoy full HD videos and multichannel audio sources stored on the
mobile device. The HDMI 5/MHL jack of the unit enables you to input videos and audio
directly from the mobile device to the unit.
If you select the input source by pressing HDMI 5, the video/audio played back on the
mobile device will be output from the unit.
To watch videos input to the HDMI 5/MHL jack, you need to connect your TV to the HDMI OUT jack of the
unit (p.17 to 20).
You need to prepare an MHL cable that match the jack on your mobile device.
You can operate the mobile device using the menu operation keys, external device operation keys and
numeric keys on the remote control. However, some features may not be compatible, depending on the
mobile device or its application. In this case, operate the mobile device itself.
If “Standby Through” (p.75) in the “Setup” menu is set to “On”, you can output mobile device videos/audio
to the TV or operate the mobile device using the remote control of the unit even when the unit is in standby
mode.
The unit supplies power to the mobile device in the following conditions.
The unit is turned on.
The unit is in standby mode while “Standby Through” (p.75) in the “Setup” menu is set to “On”.
4 Connecting playback devices
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
COMPONENT
VIDEO
P
B
Y
VIDEO
AV
MONITOR OUT
OUT
AUDIO
AV 4
P
R
P
B
Y
P
R
ANTENNA
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI 4
HDMI
OUT
ARC
(
RADIO
)
SUBWOOFER
PRE OUT
HDMI 5
MHL
5V 1A
HDMI
HDMI
HDMI
HDMI 1
(
BD/DVD
)
HDMI 2 HDMI 3 HDMI 4
HDMI 5
MHL
5V 1A
The unit (rear)
HDMI output
Video device
HDMI 1–5 jacks
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
COMPONENT
VIDEO
P
B
Y
VIDEO
AV
MONITOR OUT
OUT
AUDIO
AV 4
P
R
P
B
Y
P
R
ANTENNA
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI 4
HDMI
OUT
ARC
(
RADIO
)
SUBWOOFER
PRE OUT
HDMI 5
MHL
5V 1A
HDMI 5
MHL
5V 1A
MHL
MHL
The unit (rear)
Mobile device
HDMI 5/MHL jack
MHL output
1 2 3 4
Playback device connections
5 6 7 8 9 10
PREPARATIONS Connecting playback devices En 23
Component video connection
Connect a video device to the unit with a component video cable and an audio cable
(digital optical or digital coaxial). Choose a set of input jacks (on the unit) depending on
the audio output jacks available on your video device.
If you select the input source by pressing AV 1–2, the video/audio played back on the
video device will be output from the unit.
To watch videos input to the AV 1–2 (COMPONENT VIDEO) jacks, you need to connect your TV to the
MONITOR OUT (COMPONENT VIDEO) jacks of the unit (p.21).
Composite video connection
Connect a video device to the unit with a video pin cable and an audio cable (digital
coaxial, digital optical, or stereo pin cable). Choose a set of input jacks (on the unit)
depending on the audio output jacks available on your video device.
If you select the input source by pressing AV 3–6, the video/audio played back on the
video device will be output from the unit.
To watch videos input to the AV 3–6 (VIDEO) jacks, you need to connect your TV to the MONITOR OUT
(VIDEO) jack of the unit (p.21).
Output jacks on video device
Input jacks on the unit
Video Audio
Component video
Digital optical AV 1 (COMPONENT VIDEO + OPTICAL)
Digital coaxial AV 2 (COMPONENT VIDEO + COAXIAL)
AV 1
AV 2
AV 3
AV 5
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
P
B
Y
VIDEO
AV 4
P
R
D
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI
OUT
ARC
COAXIAL
OPTICAL
P
R
P
B
Y
COMPONENT
VIDEO
OPTICAL COAXIAL
COMPONENT
VIDEO
P
R
P
B
Y
AV 1
AV 2
O
O
C
C
P
R
P
B
Y
P
R
P
B
Y
The unit (rear)
AV 1–2
(COMPONENTVIDEO)
jacks
Video output
(component video)
Video device
Audio output
(digital optical or digital coaxial)
AV 1 (OPTICAL) jack or
AV 2 (COAXIAL) jack
Output jacks on video device
Input jacks on the unit
Video Audio
Composite video
Digital coaxial AV 3 (VIDEO + COAXIAL)
Digital optical AV 4 (VIDEO + OPTICAL)
Analog stereo AV 5–6 (VIDEO + AUDIO)
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
P
B
Y
VIDEO
AV
OUT
AV 4
P
R
ANTENNA
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI
OUT
ARC
(
RADIO
)
R
L
COAXIAL
OPTICAL
R
L
COAXIAL
OPTICAL
VIDEO
VIDEO
CC
L
R
L
R
OO
V
V
The unit (rear)
AV 3–6 (VIDEO) jack
Video output
(composite video)
Video device
Audio output
(either digital optical,
digital coaxial, or analog stereo)
Any of AV 3 (COAXIAL) jack,
AV 4 (OPTICAL) jack,
AV 5–6 (AUDIO) jacks
1 2 3 4
Playback device connections
5 6 7 8 9 10
PREPARATIONS Connecting playback devices En 24
Changing the combination of video/audio input jacks
If the combination of video/audio input jacks available on the unit does not match your
video device, change its combination according to the output jacks of your device. You
can connect a video device that has the following video/audio output jacks.
Necessary setting
For example, if you have connected a video device to AV 2 (COMPONENT VIDEO) and
AV 5 (AUDIO) jacks of the unit, change the combination setting as follows.
1
After connecting external devices (such as a TV and playback
devices) and power cable of the unit, turn on the unit.
2
Press AV 2 to select “AV 2” (video input jack to be used) as the input
source.
3
Press OPTION.
4
Use the cursor keys (q/w) to select “Audio In” and press ENTER.
5
Use the cursor keys (
e
/
r
) to select “AV 5” (audio input jack to be
used).
6
Press OPTION.
This completes the necessary settings.
If you select “AV 2” as the input source by pressing AV 2, the video/audio played back
on the video device will be output from the unit.
Output jacks on video device Input jacks on the unit
Video Audio Video Audio
HDMI
Digital optical HDMI 1–5
AV 1 (OPTICAL)
AV 4 (OPTICAL)
Digital coaxial HDMI 1–5 AV 2–3 (COAXIAL)
Analog stereo HDMI 1–5
AV 5–6 (AUDIO)
AUDIO
Component video Analog stereo
AV 1–2
(COMPONENT
VIDEO)
AV 5–6 (AUDIO)
AUDIO
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
P
B
Y
VIDEO
AV
OUT
AV 4
P
R
ANTENNA
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI
OUT
ARC
(
RADIO
)
AV 5
R
L
R
L
AUDIO
L
R
L
R
P
R
P
B
Y
COMPONENT
VIDEO
P
R
P
B
Y
P
R
P
B
Y
AV 2 (COMPONENT VIDEO) jacks
Video output
(component video)
AV 5 (AUDIO) jacks
Video device
Audio output
(analog stereo)
The unit (rear)
RETURN
VOLUME
BD
DVD
ENTER
TOP
POP UP
DISPLAY
OPTION
SETUP
TV
NET
RADIO
RETURN
VO
LUME
BD
DV
D
TO
P
POP UP
DISPL
AY
SETUP
TV
NE
T
RADI
O
HDMI
MHL
AV
1 2
3
54
5
1 2 3 4
6
HDMI
MHL
AV
1
3
5
4
5
1
2
3
4
6
ENTER
OPTION
AV 2
Cursor keys
VOL.
AudioIn
VOL.
AudioAV5
1 2 3 4
Playback device connections
5 6 7 8 9 10
PREPARATIONS Connecting playback devices En 25
Connecting audio devices (such as CD players)
Connect audio devices such as CD players and MD players to the unit. Depending on
the audio output jacks available on your audio device, choose one of the following
connections.
If you select the input source by pressing AV 1–6 or AUDIO, the audio played back on
the audio device will be output from the unit.
Connecting to the jacks on the front panel
Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as
camcorders and portable audio players to the unit.
Before making a connection, stop playback on the device and turn down the volume on
the unit.
If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played
back on the device will be output from the unit.
To watch videos input to the VIDEO AUX (VIDEO) jack, you need to connect your TV to the MONITOR OUT
(VIDEO) jack of the unit (p.21).
You need to prepare the video/audio cables that match the output jacks on your device.
For details on how to connect an iPod or a USB storage device, see “Connecting an iPod” (p.50) or
“Connecting a USB storage device” (p.54).
When “USB” is selected as the input source, video signals input to the VIDEO AUX (VIDEO) jack are output
from the MONITOR OUT (VIDEO) jack.
Audio output jacks on audio device Audio output jacks on the unit
Digital optical
AV 1 (OPTICAL)
AV 4 (OPTICAL)
Digital coaxial AV 2–3 (COAXIAL)
Analog stereo
AV 5–6 (AUDIO)
AUDIO
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
COMPONENT
VIDEO
P
B
Y
VIDEO
AV
MONITOR
O
OUT
AUDIO
AV 4
P
R
P
B
Y
P
R
ANTENNA
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI 4
HDMI
OUT
ARC
(
RADIO
)
SU
B
P
R
R
L
COAXIAL
OPTICAL
R
L
COAXIAL
OPTICAL
CC
L
R
L
R
OO
Audio output
(either digital optical,
digital coaxial, or analog stereo)
AV 1–6 jacks
AUDIO jacks
The unit (rear)
Audio device
CONTROL
TV
BD
DVD
NET
RADIO
INPUT
SCENE
STRAIGHT
VIDEO
AUDIO
VIDEO
AUX
TONE
PROGRAM
5V 2.1A
V
Portable audio player
Camcorder
The unit (front)
1 2 3 4
Playback device connections
5 6 7 8 9 10
PREPARATIONS Connecting the DAB/FM antenna En 26
Connect the supplied DAB/FM antenna to the unit and fix the antenna ends to a wall.
The antenna should be stretched out horizontally.
If you cannot obtain good reception on the radio, adjust the height, direction or placement of the DAB/FM
antenna.
5 Connecting the DAB/FM antenna
FRONT CENTER SURROUND
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
COMPONENT
VIDEO
P
B
Y
VIDEO
AV
MONITOR OUT
OUT
AUDIO
AV 4
P
R
P
B
Y
P
R
NETWORK
ANTENNA
DAB/FM
75
SPEAKERS
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI 4
HDMI
OUT
ARC
(
RADIO
)
SUBWOOFER
PRE OUT
HDMI 5
MHL
DC OUT
5V 0.5A
5V 1A
(
NET
)
DAB/FM antenna
The unit (rear)
1 2 3 4 5
DAB/FM antenna connection
6 7 8 9 10
PREPARATIONS Connecting to a network En 27
Connect the unit to your router with a commercially-available STP network cable (CAT-5
or higher straight cable).
You can enjoy Internet radio or music files stored on media servers, such as PCs and
Network Attached Storage (NAS), on the unit.
If you are using a router that supports DHCP, you do not need to configure any network settings for the unit,
as the network parameters (such as the IP address) will be assigned automatically to it. You only need to
configure the network settings if your router does not support DHCP or if you want to configure the network
parameters manually (p.81).
You can check whether the network parameters (such as IP address) are properly assigned to the unit in
“Information” (p.81) in the “Setup” menu.
Some security software installed on your PC or the firewall settings of network devices (such as a router)
may block the access of the unit to the network devices or the Internet. In these cases, configure the
security software or firewall settings appropriately.
Each server must be connected to the same subnet as the unit.
To use the service via the Internet, broadband connection is strongly recommended.
6 Connecting to a network
FRONT
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
COMPONENT
VIDEO
P
B
Y
VIDEO
AV
MONITOR OUT
OUT
AUDIO
AV 4
P
R
P
B
Y
P
R
NETWORK
ANTENNA
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI 4
HDMI
OUT
ARC
(
RADIO
)
SUBWOOFER
PRE OUT
HDMI 5
MHL
DC OUT
5V 0.5A
5V 1A
(
NET
)
LAN
WAN
Network Attached Storage
(NAS)
Internet
Modem
Router
Network cable
PC
The unit (rear)
1 2 3 4 5 6
Network connections
7 8 9 10
PREPARATIONS Connecting recording devices En 28
You can connect video/audio recording devices to the AV OUT jacks. These jacks
output analog video/audio signals selected as the input.
To copy video/audio from a video device, connect the video device to the AV 5–6 jacks or VIDEO AUX
(VIDEO/AUDIO) jacks of the unit.
To copy audio from an audio device, connect the audio device to the AV 5–6 jacks, AUDIO jacks, or VIDEO
AUX (AUDIO) jacks of the unit.
Be sure to use the AV OUT jacks only for connecting recording devices.
After all the connections are complete, plug in the power cable.
7 Connecting recording devices
AV 2
AV 3
AV 5
AV 6
COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
VIDEO
AV
MONITOR OUT
OUT
AUDIO
AV 4
P
B
Y
P
R
ANTENNA
DAB/FM
75
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI 4
(
RADIO
)
SUBWOOFER
PRE OUT
HDMI 5
MHL
5V 1A
R
L
AUDIO
AV
OUT
VIDEO
V
V
L
R
L
R
The unit (rear)
AV OUT jacks
Video/audio input
Video recording
device
8 Connecting the power cable
FRONT CENTER SURROUND
N
ETWORK
SPEAKERS
DC OUT
5V 0.5A
(
NET
)
To an AC wall outlet
The unit (rear)
1 2 3 4 5 6 7
Recording device connections
8
Power cable connection
9 10
PREPARATIONS Selecting an on-screen menu language En 29
Select the desired on-screen menu language from English
(default), Japanese, French, German, Spanish, Russian, Italian and
Chinese.
1
Press RECEIVER z to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
Operations with TV screen are available only when your TV is connected to
the unit via HDMI. If not, carry out operations while viewing the front display.
3
Press SETUP.
4
Use the cursor keys to select “Language” and press
ENTER.
5
Use the cursor keys to select the desired language.
6
To exit from the menu, press SETUP.
The information on the front display is provided in English only.
9 Selecting an on-screen menu language
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
English
Français
Deutsch
Español
Русский
Italiano
中文
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
English
Français
Deutsch
Español
Русский
Italiano
中文
1 2 3 4 5 6 7 8 9
Language setting
10
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHANCE
R
DIRE
C
T
HDMI
MH
L
AV
TUNER
FM
INF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
V
O
LT
V
C
H
TO
P
MEN
U
PO
P-
U
P
MEN
U
D
I
S
P
L
AY
SOURCE
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
TUNIN
G
S
TRAI
G
H
T
S
UR
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
AUDI
O
1
2
3
N
E
T
US
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
RECEIVER z RECEIVER z
SETUP
Cursor keys
PREPARATIONS Optimizing the speaker settings automatically (YPAO) En 30
The Yamaha Parametric room Acoustic Optimizer (YPAO) function
detects speaker connections, measures the distances from them to
your listening position(s), and then automatically optimizes the
speaker settings, such as volume balance and acoustic
parameters, to suit your room.
Please note the following when using YPAO.
Use YPAO after connecting a TV and speakers to the unit.
During the measuring process, test tones are output at high volume. Ensure that
the test tones do not frighten small children. Also, refrain from using this function
at night when it may be a nuisance to others.
During the measuring process, you cannot adjust the volume.
During the measuring process, keep the room as quiet as possible.
Do not connect headphones.
1
Press RECEIVER z to turn on the unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
Operations with TV screen are available only when your TV is connected to
the unit via HDMI. If not, carry out operations while viewing the front display.
3
Turn on the subwoofer and set the volume to half. If
the crossover frequency is adjustable, set it to
maximum.
4
Place the YPAO microphone at your listening
position (same height as your ears) and connect it
to the YPAO MIC jack on the front panel.
The following screen appears on the TV.
10 Optimizing the speaker settings automatically (YPAO)
VOLUME HIGH CUT
CROSSOVER/
MIN MAXMIN MAX
9
12
3
9
45
YPAO microphone
Listening
position
Ear height
Place the YPAO microphone at
your listening position (same height
as your ears). We recommend the
use of a tripod as a microphone
stand. You can use the tripod
screws to stabilize the microphone.
The unit (front)
Auto Setup
Start
Exit
Press SETUP key
to Start
1 2 3 4 5 6 7 8 9 10
Automatic speaker setup
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
T
U
NE
R
F
M
INF
O
MEM
O
RY
D
A
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
ENTER
TV
TV
V
O
LT
V
C
H
T
O
P
MEN
U
P
O
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RE
C
EIVE
R
CODE SET
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
UR
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
NE
T
US
B
V-A
UX
5
4
5
1
2
3
4
S
LEEP
6
RECEIVER z RECEIVER z
PREPARATIONS Optimizing the speaker settings automatically (YPAO) En 31
To cancel the operation, disconnect the YPAO microphone, or use the
cursor keys to select “Exit” and press ENTER, before starting the
measurement.
Do not stand between the speakers and the YPAO microphone during the
measurement process (about 3 minutes).
Move to the corner of the room or leave the room.
5
To start the measurement, use the cursor keys to
select “Start” and press SETUP.
The measurement will start in 10 seconds. Press ENTER to
start the measurement immediately.
To stop the measurement temporarily, press RETURN and follow the
procedure in “Error messages” (p.32).
If cursor keys do not work, the remote control may be set to the external
device operation mode. In this case, press SOURCE/RECEIVER to set the
remote control to the unit operation mode (the key lights up in orange) and
then use the cursor keys.
The following screen appears on the TV when the
measurement finishes.
1 The number of speakers (front side/rear
side/subwoofer)
2 Speaker distance (nearest/farthest)
3 Adjustment range of speaker output level
4 Warning message (if available)
If any error message (such as E-1) or warning message (such as W-1)
appears, see “Error messages” (p.32) or “Warning messages” (p.33).
A speaker with a problem is indicated by blinking of the speaker indicators in
the front display.
If multiple warnings are given (when operating with the front display), use
the cursor keys (q/w) to check the other warning messages.
6
To save the measurement results, use the cursor
keys (e/r) to select “SAVE” and press ENTER.
The adjusted speaker settings are applied.
To finish the measurement without saving the result, select “CANCEL”.
7
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
1
2
3
4
Auto Setup
Start
Exit
Measurement
Finished
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
OK:ENTER
Caution
The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
Auto Setup
Start
Exit
Measurement
Finished
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
SAVE
1 2 3 4 5 6 7 8 9 10
Automatic speaker setup
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
V
OLUM
E
ENHANCE
R
DIRECT
H
DM
I
MHL
AV
TUNE
R
FM
I
NF
O
MEMOR
Y
DA
B
PRE
S
ET
MOVI
E
MUS
I
C
BD
DVD
MUT
E
T
V
T
V
V
O
LT
V CH
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
A
Y
CO
DE
S
ET
OPTI
O
N
TUNIN
G
S
TRAIGH
T
SUR. DECOD
E
INPU
T
M
U
T
E
9
0
1
0
EN
T
6
5
8
7
1
2
3
4
MOD
E
TV
N
E
T
RAD
I
O
AUDI
O
1
2
3
NE
T
U
S
B
V-A
UX
5
4
5
1
2
3
4
SLEEP
6
ENTER
RETURN
SOURCE/RECEIVER
SETUP
Cursor keys
PREPARATIONS Optimizing the speaker settings automatically (YPAO) En 32
Error messages
If any error message is displayed during the measurement, resolve the problem and perform YPAO again.
TV screen
Front display
Procedure to handle errors
1
Check the content of error message and
press ENTER.
2
Use the cursor keys (e/r) to select the
desired operation.
To exit the YPAO measurement:
a Select “EXIT” and press ENTER.
b Use the cursor keys (q/w) to select “Exit” and press
ENTER.
c Disconnect the YPAO microphone from the unit.
To retry the YPAO measurement from
beginning:
Select “RETRY” and press ENTER.
To proceed with the current YPAO
measurement (for E-5 and E-9 only):
Select “PROCEED” and press ENTER.
Error
message
Auto Setup
Start
Exit
ERROR
E-5:Noisy
PROCEED
5%
VOL.
SW
L
SL
C
SR
R
E-5:NOISY
Texts in parentheses denote indicators on the front display.
Error message Cause Remedy
E-1:No Front SP
(E-1:NO FRNT SP)
Front speakers are not detected.
Exit YPAO, turn off the unit, and then check the speaker
connections.
E-2:No Sur. SP
(E-2:NO SUR SP)
One of the surround speakers cannot be
detected.
E-5:Noisy
(E-5:NOISY)
The noise is too loud.
Keep the room quiet and retry YPAO. If you select
“PROCEED”, YPAO takes the measurement again and
ignores any noise detected.
E-7:No MIC
(E-7:NO MIC)
The YPAO microphone has been removed.
Connect the YPAO microphone to the YPAO MIC jack firmly
and retry YPAO.
E-8:No Signal
(E-8:NO SIGNAL)
The YPAO microphone cannot detect test
tones.
Connect the YPAO microphone to the YPAO MIC jack firmly
and retry YPAO. If this error occurs repeatedly, contact the
nearest authorized Yamaha dealer or service center.
E-9:User Cancel
(E-9:CANCEL)
The measurement has been canceled. Retry or exit YPAO as necessary.
E-10:Internal Err.
(E-10:INTERNAL)
An internal error has occurred.
Exit YPAO, and turn off and on the unit. If this error occurs
repeatedly, contact the nearest authorized Yamaha dealer or
service center.
1 2 3 4 5 6 7 8 9 10
Automatic speaker setup
PREPARATIONS Optimizing the speaker settings automatically (YPAO) En 33
Warning messages
If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.
TV screen
Front display
Procedure to handle warnings
1
Check the content of warning message
and press ENTER.
2
Use the cursor keys (e/r) to select the
desired operation.
To save the measurement results:
Select “SAVE” and press ENTER.
To discard the measurement result:
Select “CANCEL” and press ENTER.
3
Disconnect the YPAO microphone from the
unit.
Warning
message
Auto Setup
Start
Exit
Measurement
Finished
Result
3 / 2 / 0.1 ch
3.0 / 10.5 m
-3.0 / +10.0 dB
W-1:Out of Phase
OK:ENTER
VOL.
SW
L
SL
C
SR
R
W-1:PHASE
Problem speaker (blinks)
Texts in parentheses denote indicators on the front display.
Warning message Cause Remedy
W-1:Out of Phase
(W-1:PHASE)
A speaker cable may be connected with the
reverse polarity (+/-).
Check the cable connections (+/-) of the problem speaker. If
the speaker is connected incorrectly, exit YPAO, turn off the
unit, and then reconnect the speaker cable.
Depending on the type of speakers or room environment, this
message may appear even if the speakers are connected
correctly. In this case, you can ignore the message.
W-2:Over Distance
(W-2:DISTANCE)
A speaker is placed more than 24 m (80 ft)
from the listening position.
Exit YPAO, turn off the unit, and place the problem speaker
within 24 m (80 ft) of the listening position.
W-3:Level Error
(W-3:LEVEL)
There are significant volume differences
between the speakers.
Check the usage environment and cable connections (+/-) of
each speaker, and the volume of the subwoofer. If there is
any problem, exit YPAO, turn off the unit, and then reconnect
speaker cable or correct the speaker positions. We
recommend using the same speakers or speakers with
specifications that are as similar as possible.
1 2 3 4 5 6 7 8 9 10
Automatic speaker setup
PLAYBACK Basic playback procedure En 34
PLAYBACK
1
Turn on the external devices (such as a TV or
BD/DVD player) connected to the unit.
2
Use the input selection keys to select an input
source.
3
Start playback on the external device or select a
radio station.
Refer to the instruction manual for the external device.
For details on the following operations, see the
corresponding pages.
Listening to DAB radio (p.42)
Listening to FM radio (p.46)
Playing back iPod music (p.50)
Playing back music stored on a USB storage device
(p.54)
Playing back music stored on media servers (PCs/NAS)
(p.57)
Listening to Internet radio (p.60)
Playing back iTunes/iPod music via a network (AirPlay)
(p.62)
4
Press VOLUME to adjust the volume.
To mute the audio output, press MUTE. Press MUTE again to unmute.
To adjust the treble/bass settings, use the “Option” menu or TONE
CONTROL on the front panel (p.66).
Basic playback procedure
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
ENHAN
C
E
R
DIRE
C
T
TUNER
FM
INF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
ENTER
TV
TV
V
O
LT
V
C
H
T
O
P
MEN
U
PO
P-
UP
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RECEIVER
CO
DE
S
ET
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
S
LEEP
VOLUME
MUTE
Input selection keys
PLAYBACK Selecting the input source and favorite settings with one touch (SCENE) En 35
The SCENE function allows you to select the assigned input source,
sound program, and Compressed Music Enhancer on/off with just
one touch.
1
Press SCENE.
The input source and settings registered to the
corresponding scene are selected. The unit turns on
automatically when it is in standby mode.
By default, the following settings are registered for each scene.
The SCENE link playback function allows you to automatically turn on the TV or
start playback of an external device connected to the unit via HDMI, in conjunction
with a scene selection. To enable SCENE link playback, set “SCENE” (p.76) in the
“Setup” menu to “On”.
Configuring scene assignments
1
Perform the following operations to prepare the
settings you want to assign to a scene.
Select an input source (p.34)
Select a sound program (p.36)
Enable/disable Compressed Music Enhancer (p.41)
2
Hold down the desired SCENE key until “SET
Complete” appears on the front display.
3
If you want to control the corresponding playback
device after selecting the scene, hold down the
corresponding SCENE key and input selection key
together for more than 3 seconds.
Once the setting is completed successfully, SOURCE/RECEIVER
blinks twice.
If you have not registered the remote control code of the playback device yet, see
“Registering the remote control codes for playback devices” (p.87) to register it.
Selecting the input source and favorite settings with one touch (SCENE)
SCENE Input
Sound
program
Compressed
Music
Enhancer
SCENE link
playback
BD/DVD HDMI 1
MOVIE
(Sci-Fi)
Off On
TV AV 4 STRAIGHT On On
NET NET RADIO
MUSIC
(5ch Stereo)
On Off
RADIO TUNER (FM)
MUSIC
(5ch Stereo)
On Off
SW
C
L
SL SR
R
SETComplete
VOL.
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
TUNER
FM
I
NF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
MUTE
ENTER
TV
TV
VO
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
CO
DE
S
ET
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
S
LEEP
SCENE
SOURCE/RECEIVER
Input selection keys
PLAYBACK Selecting the sound mode En 36
The unit is equipped with a variety of sound programs and
surround decoders that allow you to enjoy playback sources with
your favorite sound mode (such as sound field effect or stereo
playback).
Selecting a sound program suitable for movies
Press MOVIE repeatedly.
This mode lets you enjoy sound field effects optimized for viewing
video sources, such as movies, TV programs, and games (p.37).
Selecting a sound program suitable for music or
stereo playback
Press MUSIC repeatedly.
This mode lets you enjoy sound field effects optimized for listening
music sources or stereo playback (p.38).
Selecting a surround decoder
Press SUR.DECODE repeatedly.
This mode lets you enjoy unprocessed multichannel playback from
2-channel sources (p.40).
Switching to the straight decode mode
Press STRAIGHT.
This mode lets you enjoy unprocessed sounds in original channels
(p.39).
Switching to the direct playback mode
Press DIRECT.
This mode lets you enjoy pure high fidelity sound by reducing the
electrical noise from other circuitry (p.40).
Enabling Compressed Music Enhancer
Press ENHANCER.
This mode lets you enjoy compressed music with additional depth
and breadth (p.41).
You can also switch the sound programs and surround decoder by pressing
PROGRAM on the front panel.
The sound mode can be applied separately to each input source.
When you play back audio signals with a sampling rate of higher than 96 kHz or
playing back DTS Express, the straight decode mode (p.39) is automatically
selected.
You can check which speakers are currently outputting sound by looking at the
speaker indicators on the unit’s front panel (p.8).
Selecting the sound mode
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
HDMI
MHL
AV
TUNER
FM
INF
O
MEM
O
RY
DA
B
PRE
S
ET
BD
DV
D
MUTE
ENTER
TV
TV
V
O
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RECEIVER
CO
DE
S
ET
O
PTI
O
N
S
ETUP
TUNIN
G
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
AUDI
O
1
2
3
N
E
T
U
S
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
MOVIE
MUSIC
SUR.DECODE
STRAIGHT
DIRECT
ENHANCER
PLAYBACK Selecting the sound mode En 37
Enjoying sound field effects (CINEMA DSP)
The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP
technology (CINEMA DSP). It allows you to easily create sound fields like actual movie
theaters or concert halls in your room.
When you play back DTS-HD sources, the DTS decoder is automatically selected.
You can adjust the sound field effect level in “DSP Level” (p.66) in the “Option” menu.
Sound programs suitable for movies (MOVIE)
The following sound programs are optimized for viewing video sources, such as
movies, TV programs, and games.
Standard
This program creates a sound field that emphasizes the surround feeling
without disturbing the original acoustic positioning of multichannel audio,
such as Dolby Digital and DTS. Its design is based on the concept of the
ideal movie theater, in which the audience is surrounded by beautiful
reverberations from the left, right, and rear.
Spectacle
This program delivers the scale and grandeur of spectacular movie
productions. It delivers an expansive sound space to match the
cinemascope wide-screen, and boasts a broad dynamic range, providing
everything from small delicate sounds to powerful loud booms.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the
latest Sci-Fi and SFX movies. You can enjoy a variety of
cinematographically created virtual spaces reproduced with clear
separation between dialogue, sound effects, and background music.
Adventure
This program is ideal for reproducing the sound design of action and
adventure movies precisely. The sound field restrains reverberations, but
puts emphasis on reproducing a sensation of expansiveness on both sides,
powerful space expanded widely to the left and right. The restrained depth
creates a clear and powerful space, while also maintaining the articulation
of the sounds and the separation of the channels.
SW
C
L
SL SR
R
Sci-Fi
VOL.
Sound program category
Sound program
“CINEMA DSP” lights up
Drama
This program features stable reverberations that match a wide range of
movie genres, from serious dramas to musicals and comedies. The
reverberations are modest, but suitably stereophonic. The sound effects
and background music are reproduced with a gentle echo that does not
impinge on the articulation of the dialogue. You’ll never get tired listening for
long periods.
Mono Movie
This program reproduces monaural video sources, such as classic movies,
in an atmosphere of a good old movie theater. The program creates a
pleasant space with depth, by adding breadth and the appropriate
reverberation to the original audio.
Sports
This program allows listeners to enjoy the rich vividness of sport broadcasts
and light entertainment programs. In sports broadcasts, the commentators’
voices are positioned clearly at the center, while the atmosphere inside the
stadium is realistically conveyed by the peripheral delivery of the sounds of
the fans in a suitable space.
Action Game
This program is suitable for action games, such as car racing and fighting
games. The reality of, and emphasis on, various effects makes the player
feel like they are right in the middle of the action, allowing for greater
concentration. Use this program in combination with Compressed Music
Enhancer for a more dynamic and strong sound field.
Roleplaying Game
This program is suitable for role-playing and adventure games. This
program adds depth to the sound field for natural and realistic reproduction
of background music, special effects, and dialogue from a wide variety of
scenes. Use this program in combination with Compressed Music
Enhancer for a clearer and more spatial sound field.
PLAYBACK Selecting the sound mode En 38
Sound programs suitable for music/stereo playback
(MUSIC)
The following sound programs are optimized for listening to music sources.
You can also select stereo playback.
Hall in Munich
This program simulates a Munich concert hall with approximately 2,500
seats that uses stylish wood for the interior finishing. Fine, beautiful
reverberations spread richly, creating a calming atmosphere. The listener’s
virtual seat is at the center left of the arena.
Hall in Vienna
This program simulates a 1700-seat, middle-sized concert hall with a
shoebox shape that is traditional in Vienna. Pillars and ornate carvings
create extremely complex reverberations from all around the audience,
producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling, like an
audience hall in a palace. It offers pleasant reverberations that are suitable
for courtly music and chamber music.
Cellar Club
This program simulates an intimate concert venue with a low ceiling and
homey atmosphere. A realistic, live sound field delivers powerful sounds
that make you feel as if you are sitting in the front row in front of a small
stage.
The Roxy Theatre
This program creates the sound field of a 460-seat rock music concert
venue in Los Angeles. The listener’s virtual seat is at the center left of the
hall.
The Bottom Line
This program creates the sound field at stage front in The Bottom Line, a
famous New York jazz club once. The floor can seat 300 people to the left
and right in a sound field offering real and vibrant sound.
Music Video
This program allows you to enjoy videos of pop, rock, and jazz concerts, as
if you were there yourself. Immerse yourself in the hot concert atmosphere
thanks to the vividness of the singers and solos on stage, a presence
sound field that emphasizes the beat of rhythm instruments, and a surround
sound field that reproduces the space of a big live hall.
2ch Stereo
Use this program to mix down multichannel sources to 2 channels. When
multichannel signals are input, they are down mixed to 2 channels and
output from the front speakers (this program does not utilize CINEMA DSP).
5ch Stereo
Use this program to output sound from all speakers. When you play back
multichannel sources, the unit mixes down the source to 2 channels, and
then outputs the sound from all speakers. This program creates a larger
sound field and is ideal for background music at parties.
PLAYBACK Selecting the sound mode En 39
Enjoying stereoscopic sound fields
(CINEMA DSP 3D)
CINEMA DSP 3D creates a natural stereoscopic sound field in your
room.
CINEMA DSP 3D functions when both of the following conditions
are met.
• One of the sound programs (except 2ch Stereo and 5ch Stereo) is
selected (p.37).
CINEMA DSP 3D Mode” (p.76) in the “Setup” menu is set to
“On”.
Enjoying sound field effects without
surround speakers (Virtual CINEMA DSP)
If you select one of the sound programs (except 2ch Stereo and
5ch Stereo) when no surround speakers are connected, the unit
automatically creates the surround sound field using the front-side
speakers.
Enjoying unprocessed playback
You can play back input sources without any sound field effect
processing.
Playing back in original channels
(straight decode)
When the straight decode mode is enabled, the unit produces
stereo sound from the front speakers for 2-channel sources such as
CDs, and produces unprocessed multichannel sounds for
multichannel sources.
1
Press STRAIGHT.
Each time you press the key, the straight decode mode is
enabled or disabled.
SW
C
L
SL SR
R
3
Hall in Vienna
VOL.
“CINEMA DSP n” lights up
SW
C
L
SL SR
R
STRAIGHT
VOL.
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
TUNER
FM
INF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
ENTER
TV
TV
V
O
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RECEIVER
CO
DE
S
ET
O
PTI
O
N
S
ETUP
TUNIN
G
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
AUDI
O
1
2
3
N
E
T
U
S
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
STRAIGHT
PLAYBACK Selecting the sound mode En 40
Playing back 2-channel sources in
multichannel (surround decoder)
The surround decoder enables unprocessed multichannel
playback from 2-channel sources. When a multichannel source is
input, it works the same way as the straight decode mode.
For details on each decoder see “Glossary” (p.98).
1
Press SUR.DECODE to select a surround decoder.
Each time you press the key, the surround decoder
changes.
You can adjust the surround decoder parameters in “DSP Parameter” (p.76)
in the “Setup” menu.
Enjoying pure high fidelity sound
(direct playback)
When the direct playback mode is enabled, the unit plays back the
selected source with the least circuitry in order to reduce the
electrical noise from other circuitry (such as the front display). It
allows you to enjoy Hi-Fi sound quality.
1
Press DIRECT.
Each time you press the key, the direct playback mode is
enabled or disabled.
When the direct playback mode is enabled, the following functions are not
available.
– Selecting sound programs
– Adjusting the tone control
– Operating the on-screen and “Option” menus
– Viewing information on the front display (when not in operation)
bPro Logic
Uses the Dolby Pro Logic decoder suitable for all
sources.
bPLII Movie
Use the Dolby Pro Logic II decoder suitable for
movies.
bPLII Music
Use the Dolby Pro Logic II decoder suitable for
music.
bPLII Game
Use the Dolby Pro Logic II decoder suitable for
games.
Neo: 6 Cinema Uses the DTS Neo: 6 decoder suitable for movies.
Neo: 6 Music Uses the DTS Neo: 6 decoder suitable for music.
SW
C
L
SL SR
R
ProLogic
VOL.
SW
C
L
SL SR
R
DIRECT
VOL.
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
HDMI
MHL
AV
TUNER
FM
INF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
ENTER
TV
TV
V
O
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RECEIVER
CO
DE
S
ET
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
AUDI
O
1
2
3
N
E
T
U
S
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
SUR.DECODE
DIRECT
PLAYBACK Selecting the sound mode En 41
Enjoying compressed music with enhanced
sound (Compressed Music Enhancer)
Compressed Music Enhancer adds depth and breadth to the
sound, allowing you to enjoy a dynamic sound close to the original
sound before it was compressed. This function can be used along
with any other sound modes.
1
Press ENHANCER.
Each time you press the key, Compressed Music Enhancer
is enabled or disabled.
Compressed Music Enhancer does not work on the following audio sources.
– Signals whose sampling rate is over 48 kHz
– High-definition streaming audio
You can also use “Enhancer” (p.66) in the “Option” menu to enable/disable
Compressed Music Enhancer.
Enjoying surround sound with headphones
(SILENT CINEMA)
You can enjoy surround or sound field effects, like a multichannel
speaker system, with stereo headphones by connecting the
headphones to the PHONES jack and selecting a sound program
or a surround decoder.
SW
C
L
SL SR
ENHANCER
R
Enhancer On
VOL.
“ENHANCER” lights up
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
DIRE
C
T
HDMI
MHL
AV
TUNER
FM
INF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
ENTER
TV
TV
V
O
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RECEIVER
CO
DE
S
ET
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
AUDI
O
1
2
3
N
E
T
U
S
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENHANCER
PLAYBACK Listening to DAB radio En 42
DAB (Digital Audio Broadcasting) uses digital signals for clearer
sound and more stable reception compared to analog signals. The
unit can also receive DAB+ (an upgraded version of DAB) that
allows for more stations using MPEG-4 audio codec (AAC+), which
has a more efficient transmission method.
The unit supports Band III (174 to 240 MHz) only.
Be sure to check the DAB coverage in your area in that not all areas are currently
being covered. For a list of nationwide DAB statuses and worldwide DAB
frequencies, check WorldDMB online at
http://www.worlddab.org/.
For details on the antenna connection, see “Connecting the DAB/FM antenna”
(p.26).
Preparing the DAB tuning
Before tuning into DAB radio stations, follow the procedure below
to perform an initial scan.
1
Press DAB to select the DAB band.
The following message appears on the front panel if you
have not performed an initial scan yet.
2
Press ENTER to start an initial scan.
When the initial scan finishes, the unit automatically tunes
into the first DAB radio station as stored in station order.
If no DAB radio stations are found by an initial scan, the message in Step 1
appears again. Press ENTER to start an initial scan again.
You can check reception strength of each DAB channel label (p.45).
To perform an initial scan again after some DAB radio stations are stored,
select “Init Scan” (p.65) in the “Option” menu. If you perform an initial scan
again, the DAB radio stations currently registered to the preset numbers will
be cleared.
Selecting a DAB radio station for reception
You can select a DAB radio station from the stations stored by the
initial scan.
1
Press DAB to select the DAB band.
2
Press TUNING repeatedly to select a DAB radio
station.
“Off Air” appears when the selected DAB radio station is currently not
available.
When the unit is receiving a secondary station, “2” appears next to “DAB”.
You can watch videos input from external devices while listening to radio by
selecting the video input jack in “Video Out” (p.68) in the “Option” menu.
Listening to DAB radio
VOL.
Press[ENTER]
VOL.
SW
C
L
SL SR
R
>>>-------30%
VOL.
SW
C
L
SL SR
R
BBCRadio4
VOL.
SW
C
L
SL SR
R
DailyService
VOL.
SW
C
L
SL SR
R
BBCNational
Secondary station
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
T
U
NE
R
FM
I
NF
O
MEM
O
RY
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
VO
LT
V
C
H
T
O
P
MEN
U
P
O
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
S
ETUP
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
N
E
T
US
B
V
-A
UX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
DAB
TUNING
PLAYBACK Listening to DAB radio En 43
Registering favorite DAB radio stations
(presets)
You can register up to 40 DAB radio stations as presets. Once you
have registered stations, you can easily tune into them by selecting
their preset numbers.
You can register up to 40 favorite radio stations each for DAB and FM bands.
Registering a DAB radio station as presets
Select a DAB radio station and register it to a preset number.
1
Follow “Selecting a DAB radio station for reception”
(p.42) to tune into the desired DAB radio station.
2
Hold down MEMORY for more than 2 seconds.
The first time that you do register a station, the selected
radio station will be registered to the preset number “01”.
Thereafter, each radio station you select will be registered
to the next empty (unused) preset number after the most
recently registered number.
To select a preset number for registering, press MEMORY once after tuning
into the desired DAB radio station, press PRESET to select a preset
number, and then press MEMORY again.
Selecting a preset DAB radio station
Tune into a registered DAB radio station by selecting its preset
number.
1
Press DAB to select the DAB band.
2
Press PRESET repeatedly to select the desired DAB
radio station.
You can also enter a preset number (01 to 40) directly by
using the numeric keys after pressing PRESET once.
•“No Presets” appears when no DAB radio stations are registered.
“Wrong Num.” appears when an invalid number is entered.
“Empty” appears when a preset number not in use is entered.
VOL.
SW
C
L
SL SR
R
01:BBCRadio4
Preset number
VOL.
SW
C
L
SL SR
R
02:Empty
“Empty” (not in use) or “Overwrite?” (in use)
VOL.
SW
C
L
SL SR
R
PRESET:01
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
T
U
NE
R
FM
I
NF
O
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
ENTER
TV
TV
VO
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
N
E
T
US
B
V
-A
UX
5
4
5
1
2
3
4
S
LEEP
6
MEMORY
PRESET
DAB
PLAYBACK Listening to DAB radio En 44
Clearing preset DAB radio stations
Clear DAB radio stations registered to the preset numbers.
1
Press DAB to select the DAB band.
2
Press OPTION.
3
Use the cursor keys to select “Clear Preset” and
press ENTER.
4
Use the cursor keys (q/w) to select a preset station
to be cleared and press ENTER.
If the preset station is cleared, “Cleared” appears and then
the next in-use preset number is displayed.
5
Repeat step 4 until all desired preset stations are
cleared.
6
To exit from the menu, press OPTION.
Displaying the DAB information
The unit can receive various types of DAB information when it is
tuned into a DAB radio station.
1
Tune into the desired DAB radio station.
2
Press INFO.
Each time you press the key, the displayed item changes.
About 3 seconds later, the corresponding information for
the displayed item appears.
Some information may not be available depending on the selected DAB
radio station.
VOL.
ClearPreset
VOL.
SW
C
L
SL SR
R
01:Clear?
Preset station to be cleared
VOL.
SW
L
SL
C
SR
R
01:Cleared
Service Label Station name
DLS
(Dynamic Label
Segment)
Information on the current station
Ensemble Label Ensemble name
Program Type Station genre
Date And Time Current date and time
Audio Mode Audio mode (monaural/stereo) and bit rate
CH Label/Freq. Channel label and frequency
Signal Quality Signal reception quality (0 [none] to 100 [best])
DSP Program Sound mode name
Audio Decoder Decoder name
VOL.
SW
C
L
SL SR
R
ProgramType
Item name
VOL.
SW
C
L
SL SR
R
ClassicMusic
Information
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
T
U
NE
R
FM
MEM
O
RY
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
VO
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
N
E
T
US
B
V
-A
UX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
DAB
INFO
OPTION
Cursor keys
PLAYBACK Listening to DAB radio En 45
Checking reception strength of each DAB
channel label
You can check reception strength of each DAB channel label
(0 [none] to 100 [best]).
1
Press DAB to select the DAB band.
2
Press OPTION.
3
Use the cursor keys to select “Tune Aid” and press
ENTER.
4
Use the cursor keys (e/r) to select the desired DAB
channel label.
5
To exit from the menu, press OPTION.
DAB frequency information
The unit supports Band III (174 to 240 MHz) only.
VOL.
SW
C
L
SL SR
R
5ALevel:80
DAB channel label Reception strength
Frequency
Channel
label
Frequency
Channel
label
174.928 MHz 5A 208.064 MHz 9D
176.640 MHz 5B 209.936 MHz 10A
178.352 MHz 5C 211.648 MHz 10B
180.064 MHz 5D 213.360 MHz 10C
181.936 MHz 6A 215.072 MHz 10D
183.648 MHz 6B 216.928 MHz 11A
185.360 MHz 6C 218.640 MHz 11B
187.072 MHz 6D 220.352 MHz 11C
188.928 MHz 7A 222.064 MHz 11D
190.640 MHz 7B 223.936 MHz 12A
192.352 MHz 7C 225.648 MHz 12B
194.064 MHz 7D 227.360 MHz 12C
195.936 MHz 8A 229.072 MHz 12D
197.648 MHz 8B 230.784 MHz 13A
199.360 MHz 8C 232.496 MHz 13B
201.072 MHz 8D 234.208 MHz 13C
202.928 MHz 9A 235.776 MHz 13D
204.640 MHz 9B 237.488 MHz 13E
206.352 MHz 9C 239.200 MHz 13F
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
T
U
NE
R
FM
I
NF
O
MEM
O
RY
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
VO
LT
V
C
H
T
O
P
MEN
U
P
O
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
N
E
T
US
B
V
-A
UX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
DAB
OPTION
Cursor keys
PLAYBACK Listening to FM radio En 46
You can tune into an FM radio station by specifying its frequency or
selecting from registered radio stations.
Selecting a frequency for reception
1
Press FM to select the FM band.
2
Use the following keys to set a frequency.
TUNING: Increase/decrease the frequency. Hold down the
key for about a second to search stations automatically.
Numeric keys: Enter a frequency directly. For example, to
select 98.50 MHz, press “9”, “8”, “5” and “0” (or ENT).
“TUNED” lights up when a signal is received from an FM
radio station.
“STEREO” also lights up when a stereo signal is received.
“Wrong Station!” appears when you enter a frequency that is out of
reception range.
You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM
radio reception by pressing MODE. When the signal reception for an FM
radio station is unstable, switching to monaural may improve it.
You can watch videos input from external devices while listening to radio by
selecting the video input jack in “Video Out” (p.68) in the “Option” menu.
Listening to FM radio
SW
C
L
SL SR
R
VOL.
SBL SBR
FM87.50MHz
VOL.
STEREO
TUNED
SW
C
L
SL SR
R
FM98.50MHz
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
T
U
NE
R
I
NF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
ENTER
TV
TV
VO
LT
V
C
H
T
O
P
MEN
U
P
O
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
S
ETUP
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
N
E
T
US
B
V
-A
UX
5
4
5
1
2
3
4
S
LEEP
6
MODE
TUNING
FM
Numeric keys
PLAYBACK Listening to FM radio En 47
Registering favorite FM radio stations
(presets)
You can register up to 40 FM radio stations as presets. Once you
have registered stations, you can easily tune into them by selecting
their preset numbers.
You can register up to 40 favorite radio stations each for DAB and FM bands.
Registering FM radio stations
automatically (Auto Preset)
Automatically register FM radio stations with strong signals (up to
40 stations).
(U.K. and Europe models only)
Only Radio Data System broadcasting stations are stored automatically by the
Auto Preset function.
1
Press FM to select the FM band.
2
Press OPTION.
3
Use the cursor keys to select “Auto Preset”.
4
To start the Auto Preset process, press ENTER.
The registration will start in 5 seconds. Press ENTER again
to start the registration immediately.
To specify the preset number from which to start the registration, press
PRESET or cursor keys (q/w) to select a preset number within 5 seconds
after step 4 (while “READY” is displayed) and then press ENTER (or just
wait for 5 seconds).
To cancel the Auto Preset process, press RETURN.
When the Auto Preset process finishes, “FINISH” appears and the
“Option” menu closes automatically.
Registering an FM radio station manually
Select an FM radio station manually and register it to a preset
number.
1
Follow “Selecting a frequency for reception” (p.46)
to tune into the desired FM radio station.
2
Hold down MEMORY for more than 2 seconds.
The first time that you do register an FM radio station, the
selected radio station will be registered to the preset
number “01”. Thereafter, each radio station you select will
be registered to the next empty (unused) preset number
after the most recently registered number.
To select a preset number for registering, press MEMORY once after tuning
into the desired radio station, press PRESET to select a preset number, and
then press MEMORY again.
VOL.
AutoPreset
VOL.
01:FM87.50MHz
“SEARCH” appears during Auto Preset
Preset number from which to start the registration
VOL.
AutoPreset
STEREO
TUNED
SW
C
L
SL SR
R
VOL.
01:FM98.50MHz
Preset number
SW
C
L
SL SR
R
STEREO
TUNED
VOL.
02:Empty
“Empty” (not in use) or the frequency currently registered
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
VO
LUME
ENHAN
C
E
R
DIRE
C
T
HDM
I
M
H
L
AV
T
U
NE
R
I
NF
O
DA
B
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
VO
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
D
I
S
P
L
AY
SOU
R
C
E
R
E
C
EIVER
CO
DE
S
ET
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
UR
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
AU
DI
O
1
2
3
NE
T
US
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
RETURN
MEMORY
PRESET
FM
OPTION
Cursor keys
PLAYBACK Listening to FM radio En 48
Selecting a preset FM radio station
Tune into a registered FM radio station by selecting its preset
number.
1
Press FM to select the FM band.
2
Press PRESET repeatedly to select the desired FM
radio station.
You can also enter a preset number (01 to 40) directly by
using the numeric keys after pressing PRESET once.
•“No Presets” appears when no FM radio stations are registered.
“Wrong Num.” appears when an invalid number is entered.
“Empty” appears when a preset number not in use is entered.
Clearing preset FM radio stations
Clear FM radio stations registered to the preset numbers.
1
Press FM to select the FM band.
2
Press OPTION.
3
Use the cursor keys to select “Clear Preset” and
press ENTER.
4
Use the cursor keys (q/w) to select a preset station
to be cleared and press ENTER.
If the preset station is cleared, “Cleared” appears and then
the next in-use preset number is displayed.
5
Repeat step 4 until all desired preset stations are
cleared.
6
To exit from the menu, press OPTION.
STEREO
VOL.
TUNED
SW
C
LR
SL SR
01:FM98.50MHz
PRESET
VOL.
ClearPreset
STEREO
TUNED
VOL.
SW
L
SL
C
SR
R
01:FM98.50MHz
Preset station to be cleared
VOL.
SW
L
SL
C
SR
R
01:Cleared
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
TUNER
INF
O
MEM
O
RY
DA
B
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
V
O
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RECEIVER
CO
DE
S
ET
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
M
O
D
E
TV
NE
T
RADI
O
AUDI
O
1
2
3
N
E
T
U
S
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
PRESET
FM
OPTION
Cursor keys
Numeric keys
PLAYBACK Listening to FM radio En 49
Radio Data System tuning
(U.K. and Europe models only)
Radio Data System is a data transmission system used by FM
stations in many countries. The unit can receive various types of
Radio Data System data, such as “Program Service”, “Program
Type,” “Radio Text” and “Clock Time”, when it is tuned into a Radio
Data System broadcasting station.
Displaying the Radio Data System
information
1
Tune into the desired Radio Data System
broadcasting station.
We recommend using “Auto Preset” to tune into the Radio Data System
broadcasting stations (p.47).
2
Press INFO.
Each time you press the key, the displayed item changes.
About 3 seconds later, the corresponding information for
the displayed item appears.
“Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not
displayed if the radio station does not provide the Radio Data System
service.
Program Service Program service name
Program Type Current program type
Radio Text Information on the current program
Clock Time Current time
DSP Program Sound mode name
Audio Decoder Decoder name
Frequency Frequency
STEREO
VOL.
TUNED
SW
C
LR
SL SR
ProgramType
INFO
Item name
STEREO
VOL.
TUNED
SW
C
LR
SL SR
CLASSICS
9850
Information
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SCEN
E
RETUR
N
V
O
L
UM
E
ENHANCER
DIRECT
HDMI
M
H
L
AV
T
U
NE
R
FM
MEMOR
Y
D
A
B
PRESET
MO
V
I
E
M
US
I
C
BD
DV
D
MUT
E
ENTER
TV
TV V
O
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DISP
L
A
Y
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
OPTI
O
N
SETUP
TUNIN
G
S
TRAI
G
H
T
S
UR. DECOD
E
INPU
T
MU
T
E
9
0
1
0
E
N
T
6
5
8
7
1
2
3
4
M
OD
E
T
V
N
E
T
RAD
I
O
AUDI
O
1
2
3
NE
T
US
B
V
-A
UX
5
4
5
1 2
3
4
SLEEP
6
INFO
PLAYBACK Playing back iPod music En 50
You can play back iPod music on the unit using a USB cable
supplied with the iPod.
An iPod may not be detected by the unit or some features may not be compatible,
depending on the model or software version of the iPod.
To play back iPod videos on the unit, an Apple Composite AV Cable (not supplied)
is required. Connect the USB and composite video plugs of the Apple Composite
AV cable to the USB jack and VIDEO AUX (VIDEO) jack of the unit, and connect
your TV and the unit with a video pin cable (p.21). To select a video, operate the
iPod itself in the simple play mode (p.52).
Connecting an iPod
Connect your iPod to the unit with the USB cable supplied with the
iPod.
1
Connect the USB cable to the iPod.
2
Connect the USB cable to the USB jack.
The iPod charges while it is connected to the unit. If you set the unit to standby
mode while the iPod is charging, the iPod continues to charge up to 4 hours.
If “Network Standby” (p.82) in the “Setup” menu is set to “On”, it continues to
change without limit.
Disconnect the iPod from the USB jack when it is not in use.
Playing back iPod music
Supported iPod (as of April 2013)
iPod touch (1st, 2nd, 3rd and 4th generation)
iPod nano (2nd, 3rd, 4th, 5th and 6th generation)
iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone
iPad (3rd generation), iPad 2, iPad
RADIO
STRAIGHT
VIDEO
AUDIO
VIDEO
AUX
5V 2.1A
The unit (front)
VOL.
SW
C
LR
SL SR
Connected
USB
PLAYBACK Playing back iPod music En 51
Playback of iPod content
Follow the procedure below to operate the iPod contents and start
playback.
You can control the iPod with the menu displayed on the TV screen.
Operations with TV screen are available only when your TV is connected to the
unit via HDMI. If not, carry out operations while viewing the front display, or directly
operate the iPod itself in the simple play mode (p.52).
“_” (underscore) will be displayed for characters not supported by the unit.
1
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
If playback is ongoing on your iPod, the playback screen is displayed.
2
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
To return to the previous screen, press RETURN.
To switch between the browse and playback screens during playback, press
DISPLAY.
To operate the iPod manually to select content or control playback, switch to the
simple play mode (p.52).
Browse screen
1 List name
2 Contents list
Displays the list of iPod content. Use the cursor keys to select an item and
press ENTER to confirm the selection.
3 Item number/total
4 Status indicators
Display the current repeat/shuffle settings (p.53) and playback status
(such as play/pause).
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
1/2
Music
Videos
iPod
Top
Artist Name
Album Name
Song Title
2:30
iPod
Now Playing
5:10
[DISPLAY] to List Browse
Icon Function
Moves 10 pages backward.
Moves to the previous page of the list.
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
1
4
5
2
3
Playlists
Artists
Albums
Songs
Genres
Composers
iPod
Music
[DISPLAY] to Now Playing
1/6
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
V
O
L
U
M
E
ENHAN
C
E
R
DIRE
C
T
HDM
I
MH
L
AV
T
U
NE
R
F
M
INF
O
MEM
O
RY
D
A
B
PRE
S
ET
M
O
VI
E
MUS
I
C
B
D
DV
D
MUT
E
TV
TV V
O
LT
V
C
H
T
O
P
MEN
U
P
O
P-
U
P
M
EN
U
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
S
ET
U
P
T
U
NIN
G
S
TRAI
G
H
T
SU
R
. DECOD
E
I
NP
UT
M
UT
E
9
0
1
0
EN
T
6
5
8
7
1
2
3
4
MOD
E
T
V
N
E
T
RAD
I
O
AUDI
O
1
2
3
NE
T
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
RETURN
DISPLAY
USB
Cursor keys
PLAYBACK Playing back iPod music En 52
Playback screen
1 Status indicators
Display the current repeat/shuffle settings (p.53) and playback status
(such as play/pause).
2 Playback information
Displays the artist name, album name, song title, and elapsed time/song
length.
Use the following remote control keys to control playback.
Operating the iPod itself or remote control
(simple play)
1
Press MODE to switch to the simple play mode.
The TV menu screen turns off and iPod operations are
enabled.
To display the TV menu screen, press MODE again.
2
Operate your iPod itself or the remote control to
start playback.
External device
operation keys
Function
a Resumes playback from pause.
s Stops playback.
d Stops playback temporarily.
f
Skips forward/backward.
g
h
Searches forward/backward (by holding down).
j
1
2
iPod
Now Playing
Artist Name
Album Name
Song Title
2:30
5:10
[DISPLAY] to List Browse
Operational remote control
keys
Function
Cursor keys Select an item.
ENTER Confirms the selection.
RETURN Returns to the previous screen.
External device
operation keys
a
Starts playback or stops playback
temporarily.
d
s Stops playback.
f
Skips forward/backward.
g
h
Searches forward/backward (while holding
down).
j
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
V
O
L
U
M
E
ENHAN
C
E
R
DIRE
C
T
HDM
I
MH
L
AV
T
U
NE
R
F
M
INF
O
MEM
O
RY
D
A
B
PRE
S
ET
M
O
VI
E
MUS
I
C
B
D
DV
D
MUT
E
TV
TV V
O
LT
V
C
H
D
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
S
ET
U
P
T
U
NIN
G
S
TRAI
G
H
T
SU
R
. DECOD
E
I
NP
UT
M
UT
E
9
0
1
0
EN
T
6
5
8
7
1
2
3
4
T
V
N
E
T
RAD
I
O
AUDI
O
1
2
3
NE
T
U
S
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
RETURN
MODE
Cursor keys
External device
operation keys
PLAYBACK Playing back iPod music En 53
Repeat/shuffle settings
You can configure the repeat/shuffle settings of your iPod.
During simple play, configure the repeat/shuffle settings directly on your iPod or
press MODE to display the TV menu screen and then follow the procedure below.
1
When “USB” is selected as the input source, press
OPTION.
2
Use the cursor keys to select “Repeat” (Repeat) or
“Shuffle” (Shuffle) and press ENTER.
To return to the previous screen during menu operations, press RETURN.
Texts in parentheses denote indicators on the front display.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
Item Setting Function
Repeat
(Repeat)
Off (Off) Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
c” appears in the TV screen.
All (All)
Plays back all songs repeatedly.
v” appears in the TV screen.
Shuffle
(Shuffle)
Off (Off) Turns off the shuffle function.
Songs (Songs)
Plays back songs in random order.
x” appears in the TV screen.
Albums
(Albums)
Plays back albums in random order.
x” appears in the TV screen.
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
A
V
T
U
NE
R
FM
INF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
V
O
LT
V
C
H
T
O
P
MEN
U
P
O
P-UP
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RE
C
EIVER
CO
DE
S
ET
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
UR
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
NE
T
U
S
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
RETURN
MODE
OPTION
Cursor keys
PLAYBACK Playing back music stored on a USB storage device En 54
You can play back music files stored on a USB storage device on
the unit. Refer to the instruction manuals for the USB storage
device for more information.
The unit supports USB mass storage class devices (FAT16 or
FAT32 format).
The unit supports WAV (PCM format only), MP3, WMA, MPEG-4 AAC and FLAC
files (1- or 2-channel audio only).
The unit is compatible with sampling rate of up to 192 kHz for WAV and FLAC
files, and 48 kHz for other files.
Some features may not be compatible, depending on the model or manufacturer
of the USB storage device.
Digital Rights Management (DRM) contents cannot be played back.
The unit does not support a USB hub.
Connecting a USB storage device
1
Connect the USB storage device to the USB jack.
If the USB storage device contains many files, it may take time to load the them. In
this case, “Loading...” appears in the front display.
Disconnect the USB storage device from the USB jack when it is not in use.
Stop playback of the USB storage device before disconnect it from the USB jack.
You cannot connect the PC to the USB jack of the unit.
Playback of USB storage device contents
Follow the procedure below to operate the USB storage device
contents and start playback.
You can control the USB memory device with the menu displayed
on the TV screen.
Operations with TV screen are available only when your TV is connected to the
unit via HDMI. If not, carry out operations while viewing the front display.
“_” (underscore) will be displayed for characters not supported by the unit.
1
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
If playback is ongoing on your USB storage device, the playback screen is
displayed.
Playing back music stored on a USB storage device
RADIO
STRAIGHT
VIDEO
AUDIO
VIDEO
AUX
5V 2.1A
The unit (front)
USB storage device
VOL.
SW
C
LR
SL SR
Connected
USB
1/12
Blues
Classical
Electronica
Jazz
Pop
Rock
Soundtrack
Speaking
USB
Top
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RET
U
R
N
V
O
L
U
M
E
ENHAN
C
E
R
DIRE
C
T
HDM
I
MH
L
AV
T
U
NE
R
F
M
INF
O
MEM
O
RY
D
A
B
PRE
S
ET
M
O
VI
E
MUS
I
C
B
D
DV
D
MUT
E
ENTER
TV
TV V
O
LT
V
C
H
T
O
P
MEN
U
P
O
P-
U
P
M
EN
U
DISP
L
A
Y
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
S
ET
U
P
T
U
NIN
G
S
TRAI
G
H
T
SU
R
. DECOD
E
I
NP
UT
M
UT
E
9
0
1
0
EN
T
6
5
8
7
1
2
3
4
MOD
E
T
V
N
E
T
RAD
I
O
AUDI
O
1
2
3
NE
T
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
USB
PLAYBACK Playing back music stored on a USB storage device En 55
2
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
To return to the previous screen, press RETURN.
To switch between the browse and playback screens during playback, press
DISPLAY.
Files not supported by the unit cannot be selected.
Browse screen
1 List name
2 Contents list
Displays the list of USB storage device contents. Use the cursor keys to
select an item and press ENTER to confirm the selection.
3 Item number/total
4 Status indicators
Display the current repeat/shuffle settings (p.56) and playback status
(such as play/pause).
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Artist Name
Album Name
Song Title
2:30
USB
Now Playing
[DISPLAY] to List Browse
Icon Function
Moves 10 pages backward.
Moves to the previous page of the list.
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
14
5
2
3
[DISPLAY] to Now Playing
1/12
Blues
Classical
Electronica
Jazz
Pop
Rock
Soundtrack
Speaking
USB
Top
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
V
O
L
U
M
E
ENHAN
C
E
R
DIRE
C
T
HDM
I
MH
L
AV
T
U
NE
R
F
M
INF
O
MEM
O
RY
D
A
B
PRE
S
ET
M
O
VI
E
MUS
I
C
B
D
DV
D
MUT
E
TV
TV V
O
LT
V
C
H
T
O
P
MEN
U
P
O
P-
U
P
M
EN
U
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
S
ET
U
P
T
U
NIN
G
S
TRAI
G
H
T
SU
R
. DECOD
E
I
NP
UT
M
UT
E
9
0
1
0
EN
T
6
5
8
7
1
2
3
4
MOD
E
T
V
N
E
T
RAD
I
O
AUDI
O
1
2
3
NE
T
U
S
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
RETURN
DISPLAY
Cursor keys
PLAYBACK Playing back music stored on a USB storage device En 56
Playback screen
1 Status indicators
Display the current repeat/shuffle settings (p.56) and playback status
(such as play/pause).
2 Playback information
Displays the artist name, album name, song title, and elapsed time.
Use the following remote control keys to control playback.
Repeat/shuffle settings
You can configure the repeat/shuffle settings for playback of USB
storage device contents.
1
When “USB” is selected as the input source, press
OPTION.
2
Use the cursor keys to select “Repeat” (Repeat) or
“Shuffle” (Shuffle) and press ENTER.
To return to the previous screen during menu operations, press RETURN.
Texts in parentheses denote indicators on the front display.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
External device
operation keys
Function
a Resumes playback from pause.
s Stops playback.
d Stops playback temporarily.
f
Skips forward/backward.
g
1
2
USB
Now Playing
Artist Name
Album Name
Song Title
2:30
[DISPLAY] to List Browse
Item Setting Function
Repeat
(Repeat)
Off (Off) Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly.
v” appears on the TV screen.
Shuffle
(Shuffle)
Off (Off) Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order.
x” appears on the TV screen.
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
TUNER
FM
I
NF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
VO
LT
V
C
H
D
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
NE
T
US
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
RETURN
OPTION
Cursor keys
External device
operation keys
PLAYBACK Playing back music stored on media servers (PCs/NAS) En 57
You can play back music files stored on your PC or
DLNA-compatible NAS on the unit.
To use this function, the unit and your PC must be connected to the same router
(p.27). You can check whether the network parameters (such as the IP address)
are properly assigned to the unit in “Information” (p.81) in the “Setup” menu.
The unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC
and FLAC files.
The unit is compatible with sampling rates of up to 192 kHz for WAV and FLAC
files, and 48 kHz for other files.
To play back FLAC files, you need to install server software that supports sharing
of FLAC files via DLNA on your PC or use a NAS that supports FLAC files.
Media sharing setup
To play back music files stored on your PC or DLNA-compatible
NAS, first you need to configure the media sharing setting on each
music server.
For a PC with Windows Media Player
installed
1
Check that Windows Media Player 11 or later is
installed on your PC.
2
In the media sharing settings, enable media sharing
and allow media to be shared with the device.
For a PC or a NAS with other DLNA server
software installed
Refer to the instruction manual for the device or software and
configure the media sharing settings.
Playback of PC music contents
Follow the procedure below to operate the PC music contents and
start playback.
You can control the PC/NAS with the menu displayed on the TV
screen.
Operations with TV screen are available only when your TV is connected to the
unit via HDMI. If not, carry out operations while viewing the front display.
“_” (underscore) will be displayed for characters not supported by the unit.
1
Press NET repeatedly to select “SERVER” as the
input source.
The browse screen is displayed on the TV.
If playback of a music file selected from the unit is ongoing on your PC, the
playback screen is displayed.
2
Use the cursor keys to select a music server and
press ENTER.
Playing back music stored on media servers (PCs/NAS)
1/4
DESKTOP
NAS A
NAS B
NOTE
SERVER
Top
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
TUNER
FM
INF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
V
O
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RECEIVER
CO
DE
S
ET
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
AUDI
O
1
2
3
U
S
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
NET
Cursor keys
PLAYBACK Playing back music stored on media servers (PCs/NAS) En 58
3
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
To return to the previous screen, press RETURN.
To switch between the browse and playback screens during playback, press
DISPLAY.
Files not supported by the unit cannot be selected.
Browse screen
1 List name
2 Contents list
Displays the list of PC content. Use the cursor keys to select an item and
press ENTER to confirm the selection.
3 Item number/total
4 Status indicators
Display the current repeat/shuffle settings (p.59) and playback status
(such as play/pause).
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Artist Name
Album Name
Song Title
2:30
SERVER
Now Playing
[DISPLAY] to List Browse
Icon Function
Moves 10 pages backward.
Moves to the previous page of the list.
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
14
5
2
3
[DISPLAY] to Now Playing
1/14
Blues
Classical
Electronica
Jazz
Pop
Rock
Soundtrack
Speaking
SERVER
NAS A
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
V
O
L
U
M
E
ENHAN
C
E
R
DIRE
C
T
HDM
I
MH
L
AV
T
U
NE
R
F
M
INF
O
MEM
O
RY
D
A
B
PRE
S
ET
M
O
VI
E
MUS
I
C
B
D
DV
D
MUT
E
TV
TV V
O
LT
V
C
H
T
O
P
MEN
U
P
O
P-
U
P
M
EN
U
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
S
ET
U
P
T
U
NIN
G
S
TRAI
G
H
T
SU
R
. DECOD
E
I
NP
UT
M
UT
E
9
0
1
0
EN
T
6
5
8
7
1
2
3
4
MOD
E
T
V
N
E
T
RAD
I
O
AUDI
O
1
2
3
NE
T
U
S
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
RETURN
DISPLAY
Cursor keys
PLAYBACK Playing back music stored on media servers (PCs/NAS) En 59
Playback screen
1 Status indicators
Display the current repeat/shuffle settings (p.59) and playback status
(such as play/pause).
2 Playback information
Displays the artist name, album name, song title, and elapsed time.
Use the following remote control keys to control playback.
You can also use a DLNA-compatible Digital Media Controller (DMC) to control
playback. For details, see “DMC Control” (p.82).
Repeat/shuffle settings
You can configure the repeat/shuffle settings for the playback of PC
music content.
1
When “SERVER” is selected as the input source,
press OPTION.
2
Use the cursor keys to select “Repeat” (Repeat) or
“Shuffle” (Shuffle) and press ENTER.
To return to the previous screen during menu operations, press RETURN.
Text in parentheses denotes indicators on the front display.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
External device
operation keys
Function
a Resumes playback from pause.
s Stops playback.
d Stops playback temporarily.
f
Skips forward/backward.
g
1
2
SERVER
Now Playing
Artist Name
Album Name
Song Title
2:30
[DISPLAY] to List Browse
Item Setting Function
Repeat
(Repeat)
Off (Off) Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly.
v” appears on the TV screen.
Shuffle
(Shuffle)
Off (Off) Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order.
x” appears on the TV screen.
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
TUNER
FM
I
NF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
VO
LT
V
C
H
D
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
NE
T
US
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
RETURN
OPTION
Cursor keys
External device
operation keys
PLAYBACK Listening to Internet radio En 60
You can listen to Internet radio stations from all over the world.
You can control the Internet radio with the menu displayed on the
TV screen.
Operations with TV screen are available only when your TV is connected to the
unit via HDMI. If not, carry out operations while viewing the front display.
To use this function, the unit must be connected to the Internet (p.27). You can
check whether the network parameters (such as the IP address) are properly
assigned to the unit in “Information” (p.81) in the “Setup” menu.
You may not be able to receive some Internet radio stations.
The unit uses the vTuner Internet radio station database service.
This service may be discontinued without notice.
1
Press NET repeatedly to select “NET RADIO” as the
input source.
The browse screen is displayed on the TV.
2
Use the cursor keys to select an item and press
ENTER.
If an Internet radio station is selected, playback starts and
the playback screen is displayed.
To return to the previous screen, press RETURN.
To switch between the browse and playback screens during playback, press
DISPLAY.
You can register your favorite Internet radio stations to the “Bookmarks” folder by
selecting “NET RADIO” as the input source on the unit and then accessing the
following website with the web browser on your PC. To use this feature, you need
the vTuner ID of the unit and your e-mail address to create your personal account.
You can check the vTunerID (MAC address of the unit) in “Information” (p.81) in
the “Setup” menu.
http://yradio.vtuner.com/
Listening to Internet radio
1/7
Bookmarks
Locations
Genres
New Stations
Popular Stations
Podcasts
Help
NET RADIO
Top
Station Name
Album Name
Song Title
2:30
NET RADIO
Now Playing
[DISPLAY] to List Browse
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
V
O
L
U
M
E
ENHAN
C
E
R
DIRE
C
T
HDM
I
MH
L
AV
T
U
NE
R
F
M
INF
O
MEM
O
RY
D
A
B
PRE
S
ET
M
O
VI
E
MUS
I
C
B
D
DV
D
MUT
E
TV
TV V
O
LT
V
C
H
T
O
P
MEN
U
P
O
P-
U
P
M
EN
U
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
S
ET
U
P
T
U
NIN
G
S
TRAI
G
H
T
SU
R
. DECOD
E
I
NP
UT
M
UT
E
9
0
1
0
EN
T
6
5
8
7
1
2
3
4
MOD
E
T
V
N
E
T
RAD
I
O
AUDI
O
1
2
3
U
S
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
RETURN
DISPLAY
NET
Cursor keys
PLAYBACK Listening to Internet radio En 61
Browse screen
1 List name
2 Contents list
Displays the list of Internet radio content. Use the cursor keys to select an
item and press ENTER to confirm the selection.
3 Item number/total
4 Playback indicator
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Playback screen
1 Playback indicator
2 Playback information
Displays the station name, album name, song title, and elapsed time.
Use the external device operation key (s) to stop playback.
Some information may not be available depending on the station.
Icon Function
Moves 10 pages backward.
Moves to the previous page of the list.
Moves to the next page of the list.
Moves 10 pages forward.
Moves to the playback screen.
14
5
2
3
[DISPLAY] to Now Playing
1/7
Bookmarks
Locations
Genres
New Stations
Popular Stations
Podcasts
Help
NET RADIO
Top
1
2
Station Name
Album Name
Song Title
2:30
NET RADIO
Now Playing
[DISPLAY] to List Browse
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
TUNER
FM
I
NF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
VO
LT
V
C
H
D
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
NE
T
US
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
Cursor keys
External device
operation keys
PLAYBACK Playing back iTunes/iPod music via a network (AirPlay) En 62
The AirPlay function allows you to play back iTunes/iPod music on
the unit via network.
To use this function, the unit and your PC or iPod must be connected to the same
router (p.27). You can check whether the network parameters (such as the IP
address) are properly assigned to the unit in “Information” (p.81) in the “Setup”
menu.
Playback of iTunes/iPod music contents
Follow the procedure below to play back iTunes/iPod music
contents on the unit.
1
Turn on the unit, and start iTunes on the PC or
display the playback screen on the iPod.
If the iTunes/iPod recognizes the unit, the AirPlay icon
( ) appears.
If the icon does not appear, check whether the unit and PC/iPod are
connected to the router properly.
2
On the iTunes/iPod, click (tap) the AirPlay icon and
select the unit (network name of the unit) as the
audio output device.
3
Select a song and start playback.
The unit automatically selects “AirPlay” as the input source and
starts playback.
The playback screen is displayed on the TV.
The playback screen is available only when your TV is connected to the unit via HDMI.
Playing back iTunes/iPod music via a network (AirPlay)
Supported iTunes/iPod (as of April 2013)
iTunes 10.2.2 or later (Windows/Mac)
iPod touch, iPhone or iPad with iOS 4.3.3 or later
PC
iTunes
Router
Playback starts
iPod
Starts playback
on iTunes
or iPod
The unit
iTunes (example) iPod (example)
iTunes (example) iPod (example)
Network name of the unit
PLAYBACK Playing back iTunes/iPod music via a network (AirPlay) En 63
You can turn on the unit automatically when starting playback on iTunes or iPod by
setting “Network Standby” (p.82) in the “Setup” menu to “On”.
You can edit the network name (the unit’s name on the network) displayed on
iTunes/iPod in “Network Name” (p.82) in the “Setup” menu.
If you select the other input source on the unit during playback, playback on the
iTunes/iPod stops automatically.
You can adjust the unit’s volume from the iTunes/iPod during playback. To disable
volume controls from iTunes/iPod, set “Volume Interlock” (p.68) in the “Option”
menu to “Off”.
Playback screen
1 Playback indicator
2 Playback information
Displays the artist name, album name, song title, and elapsed time/song
length.
Use the following remote control keys to control playback.
To control iTunes playback with the remote control of the unit, you need to
configure the iTunes preferences to enable iTunes control from remote speakers in
advance.
Caution
When you use iTunes/iPod controls to adjust volume, the volume may be
unexpectedly loud. This could result in damage to the unit or speakers. If the
volume suddenly increases during playback, stop playback on the iTunes/iPod
immediately.
2
1
Artist Name
Album Name
Song Title
2:30
AirPlay
Now Playing
5:30
External device
operation keys
Function
a Resumes playback from pause.
s Stops playback.
d Stops playback temporarily.
f
Skips forward/backward.
g
iTunes (example of English version)
Check this box
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
TUNER
FM
I
NF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
ENTER
TV
TV
VO
LT
V
C
H
D
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
NE
T
US
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
External device
operation keys
PLAYBACK Viewing the current status En 64
Switching information on the front display
1
Press INFO.
Each time you press the key, the displayed item changes.
About 3 seconds later, the corresponding information for
the displayed item appears.
Available items vary depending on the selected input source. The displayed
item can also be applied separately to each input source group.
* The name of the audio decoder currently activated is displayed. If no audio
decoder is activated, “Decoder Off” appears.
Viewing the current status
VOL.
SW
C
L
SL SR
R
AudioDecoder
Item name
VOL.
SW
C
L
SL SR
R
ProLogic
Information
Input source group Item
HDMI 1–5
AV 16
AUDIO
V-AUX
Input (input source name), DSP Program (sound
mode name), Audio Decoder (decoder name*)
USB
SERVER
AirPlay
Song (song title), Artist (artist name), Album (album
name), DSP Program (sound mode name), Audio
Decoder (decoder name*)
* During simple playback of iPod:
Input (input source name), DSP Program (sound mode
name), Audio Decoder (decoder name)
NET RADIO
Song (song title), Album (album name), Station
(station name), DSP Program (sound mode name),
Audio Decoder (decoder name*)
TUNER (DAB)
See “Displaying the DAB information” (p.44) for
details.
TUNER (FM)
Frequency (frequency), DSP Program (sound mode
name), Audio Decoder (decoder name*)
* (U.K. and Europe models only)
Radio Data System data is also available when the unit is
tuned into a Radio Data System broadcasting station (p.49).
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETUR
N
V
OLUM
E
ENHANCE
R
DIRECT
H
DM
I
MHL
AV
TUNE
R
FM
MEMOR
Y
DA
B
PRE
S
ET
MOVI
E
MUS
I
C
BD
DVD
MUT
E
ENTER
TV
T
V
V
O
LT
V CH
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
A
Y
SOU
R
C
E
RECEIVE
R
CO
DE
S
ET
OPTI
O
N
SETUP
TUNIN
G
S
TRAIGH
T
SUR. DECOD
E
INPU
T
M
U
T
E
9
0
1
0
EN
T
6
5
8
7
1
2
3
4
MOD
E
TV
N
E
T
RAD
I
O
AUDI
O
1
2
3
NE
T
U
S
B
V-A
UX
5
4
5
1
2
3
4
S
LEEP
6
INFO
PLAYBACK Configuring playback settings for different playback sources (Option menu) En 65
You can configure separate playback settings for different playback sources. This
menu is available on the front panel (or on the TV screen), allowing you to easily
configure settings during playback.
1
Press OPTION.
Front display
TV screen
2
Use the cursor keys to select an item and press ENTER.
To return to the previous screen during menu operations, press RETURN.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
Option menu items
Available items vary depending on the selected input source.
Text in parentheses denotes indicators on the front display.
Depending on the region of purchase, some menu items for audio streaming services are also available.
For details, refer to each manual on the supplied CD-ROM.
Configuring playback settings for different playback sources (Option menu)
VOL.
SW
C
LR
SL SR
ToneControl
OPTION
Tone Control
DSP/Surround
Volume Trim
Lipsync
Signal Info
Audio In
Option
Item Function Page
Tone Control (Tone Control)
Adjusts the high-frequency range and low-frequency
range of sounds.
66
DSP/Surround
(DSP/Surround)
DSP Level
(DSP Level)
Adjusts the sound field effect level. 66
Adaptive DRC
(A.DRC)
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted when the volume
is adjusted.
66
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer. 66
Volume Trim
(Volume Trim)
Input Trim
(In.Trim)
Corrects volume differences between input sources. 67
Subwoofer Trim
(SW.Trim)
Fine-adjusts the subwoofer volume. 67
Lipsync (Lipsync)
Enables/disables the “Lipsync” setting in the “Setup”
menu.
67
Signal Info (Signal Info) Displays information about the video/audio signal. 67
Audio In (Audio In)
Combines the video jack of the selected input source
with an audio jack of others.
68
Video Out (Video Out) Selects a video to be output with radio sounds. 68
Auto Preset (Auto Preset)
Automatically registers FM radio stations with strong
signals as presets.
47
Clear Preset (Clear Preset)
Clears DAB radio stations (p.44) or FM radio stations
(p.48) registered to preset numbers.
Init Scan (Init Scan) Performs an initial scan for DAB radio reception. 42
Tune Aid (Tune Aid)
Checks reception strength of each DAB channel
label.
45
Repeat (Repeat)
Configures the repeat setting for the iPod (p.53),
USB storage device (p.56), or media server (p.59).
PLAYBACK Configuring playback settings for different playback sources (Option menu) En 66
Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments
Default
Bypass (Bypass)
If you set an extreme value, sounds may not match those from other channels.
Adjusting with the front panel controls
a Press TONE CONTROL to select “Treble” or “Bass”.
b Press PROGRAM to make an adjustment.
DSP/Surround (DSP/Surround)
Configures the sound field program and surround settings.
DSP Level (DSP Level)
Adjusts the sound field effect level.
Setting range
-6 dB to +3 dB (1 dB increments)
Default
0 dB
Adaptive DRC (A.DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
when the volume level is adjusted. When it is set to “On”, it is useful for listening to
playback at a low volume at night.
Settings
If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a
high volume.
Enhancer (Enhancer)
Enables/disables Compressed Music Enhancer (p.41).
This setting is applied separately to each input source.
You can also use EN HANCER on the remote control to enable/disable Compressed Music Enhancer
(p.41).
Settings
Default
TUNER (DAB/FM), USB, (network sources): On (On)
Others: Off (Off)
Shuffle (Shuffle)
Configures the shuffle setting for the iPod (p.53),
USB storage device (p.56), or media server (p.59).
Volume Interlock (Interlock)
Enables/disables volume controls from iTunes/iPod
via AirPlay.
68
Item Function Page
On (On) Automatically adjusts the dynamic range.
Off (Off) (default) The dynamic range is not automatically adjusted.
Off (Off) Disables Compressed Music Enhancer.
On (On) Enables Compressed Music Enhancer.
Volume: low Volume: high
Input level Input level
On
Off
On
Off
Output level
Output level
PLAYBACK Configuring playback settings for different playback sources (Option menu) En 67
Volume Trim (Volume Trim)
Fine-adjusts volume difference between input sources or subwoofer volume.
Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
This setting is applied separately to each input source.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Default
0.0 dB
Subwoofer Trim (SW.Trim)
Fine-adjusts the subwoofer volume.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Default
0.0 dB
Lipsync (Lipsync)
Enables/disables the adjustment configured in “Lipsync” (p.77) in the “Setup” menu.
This setting is applied separately to each input source.
Settings
Default
AirPlay: Off (Off)
Others: On (On)
Signal Info (Signal Info)
Displays information about the video/audio signal.
Choices
To switch the information on the front display, press the cursor keys (q/w) repeatedly.
Off (Off) Disables the “Lipsync” adjustment.
On (On) Enables the “Lipsync” adjustment.
Format (FORMAT) Audio format of the input signal
Channel (CHAN)
The number of source channels in the input signal
(front/surround/LFE)
For example, “3/2/0.1” means 3 front channels, 2 surround channels,
and LFE.
Sampling (SAMPL) The number of samples per second of the input digital signal
Bitrate (B RATE) The amount of data per second of the input bitstream signal
Input (V IN) Type and resolution of the input digital video signal
Output (V OUT) Type and resolution of the output digital video signal
PLAYBACK Configuring playback settings for different playback sources (Option menu) En 68
Audio In (Audio In)
Combines the video jack of the selected input source (HDMI 1–5 or AV 1–2) with an
audio jack of others. For example, use this function in the following cases.
Connecting a playback device that supports HDMI video output, but not HDMI audio
output
Connecting a playback device that has component video jacks and analog stereo
jacks (such as game consoles)
Input sources
HDMI 1–5, AV 1–2
Setup procedure
(To input audio through a digital optical jack)
Select “AV 1” or “AV 4” and connect the device to the unit’s corresponding audio jacks
with a digital optical cable.
(To input audio through a digital coaxial jack)
Select “AV 2” or “AV 3” and connect the device to the unit’s corresponding audio jacks
with a digital coaxial cable.
(To input audio through analog audio jacks)
Select “AV 5”, “AV 6”, or “AUDIO”, and connect the device to the unit’s corresponding
audio jacks with a stereo pin cable.
Video Out (Video Out)
Selects a video to be output with radio sounds.
Settings
Volume Interlock (Interlock)
Enables/disables volume controls from iTunes/iPod via AirPlay.
Settings
Off (Off) (default) Does not output video.
HDMI 1–5, AV 1–6,
V-AUX
Outputs video input through the corresponding video input jacks.
Off (Off) Disables volume controls from iTunes/iPod.
Limited (Ltd)
(default)
Enables volume controls from iTunes/iPod within the limited range (-80
dB to 0 dB and mute).
Full (Full)
Enables volume controls from iTunes/iPod in the full range (-80 dB to
+16.5 dB and mute).
CONFIGURATIONS Configuring various functions (Setup menu) En 69
CONFIGURATIONS
You can configure the unit’s various function with the menu displayed on the TV screen.
Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry
out operations while viewing the front display.
1
Press SETUP.
2
Use the cursor keys to select a menu and press ENTER.
3
Use the cursor keys to select an item and press ENTER.
To return to the previous screen during menu operations, press RETURN.
4
Use the cursor keys (e/r) to select a setting and press ENTER.
5
To exit from the menu, press SETUP.
Configuring various functions (Setup menu)
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
Configuration
Distance
Level
Equalizer
Test Tone
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
Configuration
Distance
Level
Equalizer
Test Tone
CONFIGURATIONS Configuring various functions (Setup menu) En 70
Setup menu items
Menu Item Function Page
Speaker
Configuration
Subwoofer Selects whether or not a subwoofer is connected. 72
Front Selects the size of the front speakers. 72
Center Selects whether or not a center speaker is connected and its size. 72
Surround Selects whether or not surround speakers are connected and their size. 72
Crossover Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 73
Subwoofer Phase Sets the phase of the subwoofer. 73
Extra Bass Sets the speakers to produce the front channel low-frequency components. 73
Distance Sets the distance between each speaker and listening position. 74
Level Adjusts the volume of each speaker. 74
Equalizer Adjusts the tone with an equalizer. 74
Test Tone Enables/disables the test tone output. 74
HDMI Configuration
HDMI Control Enables/disables HDMI Control. 75
Audio Output Selects a device to output audio. 75
Standby Through Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 75
TV Audio Input Selects an audio input jack of the unit to be used for TV audio input. 75
Standby Sync Selects whether to use HDMI control to link the standby behavior of the TV and the unit. 76
ARC Enables/disables ARC. 76
SCENE Enables/disables SCENE link playback. 76
Sound
DSP Parameter
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 76
Panorama Enables/disables the broadening effect of the front sound field. 76
Center Width Adjusts the broadening effect of the center sound field. 77
Dimension Adjusts the difference in level between the front and surround sound fields. 77
Center Image Adjusts the center orientation level (broadening effect) of the front sound field. 77
Lipsync
Select Selects the method to adjust the delay between video and audio output. 77
Adjustment Adjusts the delay between video and audio output manually. 77
Vol ume
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 78
Max Volume Sets the maximum volume to prevent excessive loudness. 78
Initial Volume Sets the initial volume for when this receiver is turned on. 78
CONFIGURATIONS Configuring various functions (Setup menu) En 71
ECO
Auto Power Standby Sets the amount of time for the auto-standby function. 78
ECO Mode Enables/disables the eco mode (power saving mode). 79
Function
Input Rename Changes the input source name displayed on the front display. 79
Dimmer Adjusts the brightness of the front display. 80
Memory Guard Prevents accidental changes to the settings. 80
DC OUT Power Mode Selects how to supply power through the DC OUT jack. 80
Network
Information Displays the network information on the unit. 81
IP Address Configures the network parameters (such as IP address). 81
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 82
DMC Control Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback. 82
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 82
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 82
Network Update Updates the firmware via the network. 83
Language Select an on-screen menu language. 83
Menu Item Function Page
CONFIGURATIONS Configuring various functions (Setup menu) En 72
Speaker
Configures the speaker settings manually.
Configuration
Configures the output characteristics of the speakers.
When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm
(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).
Subwoofer
Selects whether or not a subwoofer is connected.
Settings
Front
Selects the size of the front speakers.
Settings
“Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
Center
Selects whether or not a center speaker is connected and its size.
Settings
Surround
Selects whether or not surround speakers are connected and their sizes.
Settings
Use (default)
Select this option when a subwoofer is connected.
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
None
Select this option when no subwoofer is connected.
The front speakers will produce LFE (low-frequency effect) channel
audio and low-frequency components from other channels.
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
Configuration
Distance
Level
Equalizer
Test Tone
Small (default)
Select this option for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Crossover”).
Large
Select this option for large speakers.
The front speakers will produce all of the front channel frequency
components.
Small (default)
Select this option for small speakers.
The subwoofer or front speakers will produce center channel
low-frequency components (configurable in “Crossover”).
Large
Select this option for large speakers.
The center speaker will produce all of the center channel frequency
components.
None
Select this option when no center speaker is connected.
The front speakers will produce center channel audio.
Small (default)
Select this option for small speakers.
The subwoofer or front speakers will produce surround channel
low-frequency components (configurable in “Crossover”).
Large
Select this option for large speakers.
The surround speakers will produce all of the surround channel
frequency components.
None
Select this option when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
CONFIGURATIONS Configuring various functions (Setup menu) En 73
Crossover
Sets the lower limit of the low-frequency components that can be output from a speaker
whose size is set to “Small”. A frequency sound lower than the specified value will be
produced from the subwoofer or front speakers.
Settings
40 Hz, 60 Hz, 80 Hz (default), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
Subwoofer Phase
Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch the
subwoofer phase.
Settings
Extra Bass
Sets the speakers to produce the front channel low-frequency components.
Settings
This setting is not available when “Subwoofer” is set to “None”, or when “Front” is set to “Small”.
Normal (default) Does not reverse the subwoofer phase.
Reverse Reverses the subwoofer phase.
Off (default)
Only the front speakers produce the front channel low-frequency
components.
On
Both the front speakers and subwoofer produce the front channel
low-frequency components.
CONFIGURATIONS Configuring various functions (Setup menu) En 74
Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Subwoofer
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
Default
Front L, Front R, Subwoofer: 3.00 m (10.0 ft)
Center: 2.60 m (8.6 ft)
Others: 2.40 m (8.0 ft)
Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
Default
Front L, Front R, Subwoofer: 0.0 dB
Others: -1.0 dB
By using test tones, you can make an adjustment while confirming its effect.
Equalizer
Adjusts the tone with an equalizer.
EQ Select
Selects the type of equalizer to be used.
Settings
“PEQ” is available only when the YPAO has been performed (p.30).
By using test tones, you can make an adjustment while confirming its effect.
Manual equalizer adjustment
1
Set “EQ Select” to “GEQ”.
2
Use the cursor keys (q/w) to select “Channel” and the cursor keys (e/r) to select
the desired speaker channel.
3
Use the cursor keys (q/w) to select the desired band (frequency) and the cursor
keys (e/r) to adjust the gain.
Setting range
-6.0 dB to +6.0 dB
4
To exit from the menu, press SETUP.
Test Tone
Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Settings
PEQ
Applies the parametric equalizer values obtained by the YPAO
measurement (p.30).
GEQ (default)
Select this option when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
Off Does not use the equalizer.
Off (default) Does not output test tones.
On
Outputs test tones automatically when you adjust the speaker balance
or equalizer.
Equalizer
EQ Select
GEQ Edit
Channel
63Hz
160Hz
400Hz
1kHz
2.5kHz
6.3kHz
16kHz
GEQ
Front L
Back:RETURN
CONFIGURATIONS Configuring various functions (Setup menu) En 75
HDMI
Configures the HDMI settings.
Configuration
HDMI Control
Enables/disables HDMI Control (p.101).
Settings
To use HDMI control, you need to perform the HDMI Control link setup (p.101) after connecting HDMI
Control-compatible devices.
Audio Output
Selects a device to output audio.
This setting is available only when “HDMI Control” is set to “Off”.
Amp
Enables/disables the audio output from the speakers connected to the unit.
Settings
HDMI OUT (TV)
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Settings
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the
unit is in standby mode. If this function is set to “On”, you can use the input selection
keys (HDMI 1–5) to select an HDMI input even when the unit is in standby mode (the
standby indicator on the unit blinks).
Settings
This setting is available only when “HDMI Control” is set to “Off”.
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control” is set to “On”. The unit’s input source automatically switches to TV audio when
the TV input is switched to its built-in tuner.
Settings
AV 1–6, AUDIO
Default
AV 4
When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting
an external device because the input will be used for TV audio input.
Off (default) Disables HDMI Control.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”,
and “SCENE”.
Off Disables the audio output from the speakers.
On (default) Enables the audio output from the speakers.
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
Configuration
Off (default) Disables the audio output from the TV.
On Enables the audio output from the TV.
Off (default) Does not output videos/audio to the TV.
On
Outputs videos/audio to the TV.
(The unit consumes more power than when “Off” is selected.)
CONFIGURATIONS Configuring various functions (Setup menu) En 76
Standby Sync
Select whether to use HDMI control to link the standby behavior of the TV and the unit
when “HDMI Control” is set to “On”.
Settings
ARC
Enables/disables ARC (p.17) when “HDMI Control” is set to “On”.
Settings
You do not need to change this setting normally. In case noises are produced from the speakers connected
to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to
“Off” and use the TV’s speakers.
SCENE
Enables/disable SCENE link playback when “HDMI Control” is set to “On”.
When SCENE link playback is enabled, HDMI Control-compatible devices connected
to the unit via HDMI automatically works as follows, with a scene selection.
TV: turning on and displaying video from the playback device
Playback device: starting playback
Choices (SCENE keys)
BD/DVD, TV, NET, RADIO
Settings
Default
BD/DVD, TV: On
NET, RADIO: Off
•SCENE link playback may not work properly due to the compatibility between devices. We recommend
using TV and playback devices from the same manufacturer so that HDMI Control works more effectively.
Sound
Configures the audio output settings.
DSP Parameter
Configures the surround decoder settings.
CINEMA DSP 3D Mode
Enables/disables CINEMA DSP 3D (p.39). If this function is set to “On”, CINEMA DSP
3D functions with the selected sound programs (except 2ch Stereo and 5ch Stereo).
Settings
Panorama
Enables/disables the broadening effect of the front sound field. When this function is
enabled, you can wrap front right/left channel sounds around the field and generate a
spacious sound field in combination with the surround sound field. This setting is
effective when “bPLII Music” is selected.
Settings
Off Does not set the unit to standby mode when the TV is turned off.
On Sets the unit to standby mode when the TV is turned off.
Auto (default)
Sets the unit to standby mode when the TV is turned off only when the
unit is receiving TV audio or HDMI signals.
Off Disables ARC.
On (default) Enables ARC.
Off Disables SCENE link playback for the selected SCENE key.
On Enables SCENE link playback for the selected SCENE key.
Off Disables CINEMA DSP 3D.
On (default) Enables CINEMA DSP 3D.
Off (default) Disables the broadening effect of the front sound field.
On Enables the broadening effect of the front sound field.
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
DSP Parameter
Lipsync
Volume
CONFIGURATIONS Configuring various functions (Setup menu) En 77
Center Width
Adjusts the broadening effect of the center sound field. Higher to enhance the
broadening effect, and lower to reduce it (closer to center). This setting is effective
when “bPLII Music” is selected.
Setting range
0 to 7
Default
3
Dimension
Adjusts the difference in level between the front and surround sound fields. Higher to
strengthen the front sound field and lower to strengthen the surround sound field. This
setting is effective when “bPLII Music” is selected.
Setting range
-3 to +3
Default
0
Center Image
Adjusts the center orientation level (broadening effect) of the front sound field. Higher
to strengthen the center orientation level (less broadening effect) and lower to weaken
(more broadening effect). This setting is effective when “Neo:6 Music” is selected.
Setting range
0.0 to 1.0
Default
0.3
Lipsync
Adjusts the delay between video and audio output.
You can enable/disable the Lipsync function by input sources in “Lipsync” (p.67) in the “Option” menu.
Select
Selects the method to adjust the delay between video and audio output.
Setting range
“Select” is automatically set to “Manual” depending on the TV connected to the unit.
Adjustment
Adjusts the delay between video and audio output manually when “Select” is set to
“Manual”. You can fine-adjust the audio output timing when “Select” is set to “Auto”.
Setting range
0 ms to 250 ms (1 ms increments)
Default
0 ms
Manual
Select this option when you want to adjust the delay between video
and audio output manually.
Adjust the audio output timing in “Adjustment”.
Auto (default)
Adjusts the delay between video and audio output automatically when
a TV that supports an automatic lipsync function is connected to the
unit via HDMI.
If necessary, you can fine-adjust the audio output timing in
“Adjustment”.
CONFIGURATIONS Configuring various functions (Setup menu) En 78
Volume
Configures the volume settings.
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Settings
Max Volume
Sets the maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
ECO
Configures the power supply settings.
Auto Power Standby
Sets the amount of time for the auto-standby function. If you do not operate the unit for
the specified time, the unit will automatically go into standby mode.
Settings
Default
U.K. and Europe models: 8 hours
Other models: Off
Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the
front display.
Maximum (default) Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Min/Auto
Sets the dynamic range for clear sound even at night or at low
volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
Off (default)
Sets the level to the volume level of the unit when it last entered
standby mode.
Mute Sets the unit to mute the audio output.
-80.0 dB to +16.5 dB
(0.5 dB increments)
Sets the level to the specified volume level.
Off Does not set the unit to standby mode automatically.
2 hours, 4 hours,
8 hours, 12 hours
Sets the unit to standby mode when you have not operated the unit for
the specified time. For example, when “2 hours” is selected, the unit
will switch to standby mode if you do not operate it for 2 hours.
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
Auto Power Standby
ECO Mode
CONFIGURATIONS Configuring various functions (Setup menu) En 79
ECO Mode
Enables/disables the eco (power saving) mode.
When the eco mode is enabled, you can reduce the unit’s power consumption.
Settings
Be sure to press ENTER to restart the unit after selecting a setting. The new setting will take effect after the
unit is restarted.
When “ECO Mode” is set to “On”, the front panel display may become dark.
If you want to play audio at high volume, set “ECO Mode” to “Off”.
Function
Configures the functions that make the unit easier to use.
Input Rename
Changes the input source name displayed on the front display.
Input sources
HDMI 1–5, AV 1–6, AUDIO, USB, V-AUX
Procedure
1
Use the cursor keys (q/w) to select an input source to be renamed and press
ENTER.
To select a name from the presets, use the cursor keys (q/w) to select an input source and the
cursor keys (e/r) to select a preset name.
2
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a character.
3
To confirm the new name, press ENTER.
To cancel the entry, press RETURN.
Off (default) Disables the eco mode.
On Enables the eco mode.
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
Input Rename
Dimmer
Memory Guard
DC OUT
Input Rename
Blu-ray
HDMI1
OK:ENTER
CANCEL:RETURN
CONFIGURATIONS Configuring various functions (Setup menu) En 80
4
To change another input source name, repeat steps 1 to 3.
5
To exit from the menu, press SETUP.
Dimmer
Adjusts the brightness of the front display.
Setting range
-4 to 0 (higher to brighten)
Default
0
The front display may become dark when “ECO Mode” (p.79) is set to “On”.
Memory Guard
Prevents accidental changes to the settings.
Settings
When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.
DC OUT
Configures the DC OUT jack setting.
Power Mode
Selects how to supply power to the Yamaha AV accessory connected to the DC OUT
jack.
Settings
Off (default) Does not protect the settings.
On Protects the settings until “Off” is selected.
o
Memory Guard
Memory Guard On
Back:RETURN
Icon
Continuous (default)
Supplies power through the DC OUT jack continuously regardless of
the power state (on/standby) of the unit.
Power Sync.
Supplies power through the DC OUT jack only when the unit is turned
on.
CONFIGURATIONS Configuring various functions (Setup menu) En 81
Network
Configures the network settings.
Information
Displays the network information on the unit.
IP Address
Configures the network parameters (such as IP address).
DHCP
Select whether to use a DHCP server.
Settings
Manual network settings
1
Set “DHCP” to “Off”.
2
Use the cursor keys (q/w) to select a parameter type.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a value.
4
To exit from the menu, press SETUP.
Status The connection status of the NETWORK jack
MAC Address MAC address
IP Address IP address
Subnet Mask Subnet mask
Default Gateway The IP address of the default gateway
DNS Server (P) The IP address of the primary DNS server
DNS Server (S) The IP address of the secondary DNS server
vTuner ID The ID of the Internet radio (vTuner)
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
Information
IP Address
MAC Address Filter
DMC Control
Network Standby
Network Name
Network Update
Off
Does not use a DHCP server. Configure the network parameters
manually. For details, see “Manual network settings”.
On (default)
Uses a DHCP server to automatically obtain the unit’s network
parameters (such as IP address).
IP Address Specifies an IP address.
Subnet Mask Specifies a subnet mask.
Default Gateway Specifies the IP address of the default gateway.
DNS Server (P) Specifies the IP address of the primary DNS server.
DNS Server (S) Specifies the IP address of the secondary DNS server.
CONFIGURATIONS Configuring various functions (Setup menu) En 82
MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
Filter
Enables/disables the MAC address filter.
Settings
MAC Address 1–10
Specifies the MAC addresses (up to 10) of the network devices that will be permitted
access to the unit when “Filter” is set to “On”.
Procedure
1
Use the cursor keys (q/w) to select an MAC address number (1 to 10).
2
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a value.
3
To exit from the menu, press SETUP.
DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control
playback.
Settings
A Digital Media Controller (DMC) is a device that can control other network devices through the network.
When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media
Player 12) on the same network.
Network Standby
Selects whether the unit can be turned on from other network devices (network
standby).
Settings
Network Name
Edits the network name (the unit’s name on the network) displayed on other network
devices.
Procedure
1
Press ENTER to enter the name edit screen.
2
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a character.
3
To confirm the new name, press ENTER.
4
To exit from the menu, press SETUP.
Off (default) Disables the MAC address filter.
On
Enables the MAC address filter. In “MAC Address 1–10”, specify the
MAC addresses of the network devices that will be permitted access
to the unit.
Disable Does not allow DMCs to control playback.
Enable (default) Allows DMCs to control playback.
Off (default) Disables the network standby function.
On
Enables the network standby function.
(The unit consumes more power than when “Off” is selected.)
Network Name
Yamaha xxxxxx
Back:RETURN
CONFIGURATIONS Configuring various functions (Setup menu) En 83
Network Update
Updates the firmware via the network.
Perform Update
Starts the process to update the unit’s firmware. For details, see “Updating the unit’s
firmware via the network” (p.89).
Firmware Version
Displays the version of the firmware installed on the unit.
System ID
Displays the system ID number.
Language
Select an on-screen menu language.
Settings
Japanese and Chinese characters used in content information (such as song titles) cannot be displayed.
The information on the front display is provided in English only.
English (default) English
Japanese
French
German
Spanish
Russian
Italian
Chinese
Setup
English
Français
Deutsch
Español
Русский
Italiano
中文
Speaker
HDMI
Sound
ECO
Function
Network
Language
Français
Deutsch
Español
Italiano
CONFIGURATIONS Configuring the system settings (ADVANCED SETUP menu) En 84
Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z (power).
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press z (power) to set the unit to standby mode and turn it on again.
The new settings take effect.
ADVANCED SETUP menu items
Selecting the remote control ID (REMOTE ID)
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
Settings
ID1 (default), ID2
Changing the remote control ID of the remote control
1
To select ID1, while holding down the cursor key (e), hold down SCENE (BD/DVD)
for more than 3 seconds.
To select ID2, while holding down the cursor key (e), hold down SCENE (TV) for
more than 3 seconds.
The registered remote control codes (p.86) are not cleared even if you change the remote control ID.
Switching the video signal type (TV FORMAT)
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL (default)
Configuring the system settings
(ADVANCED SETUP menu)
Item Function Page
REMOTE ID Selects the unit’s remote control ID. 84
TV FORMAT Switches the video signal type of HDMI output. 84
INIT Restores the default settings. 85
UPDATE Updates the firmware. 85
VERSION Checks the version of firmware currently installed on the unit. 85
z (power)
STRAIGHTPROGRAM
REMOTEIDID1
TVFORMATPAL
CONFIGURATIONS Configuring the system settings (ADVANCED SETUP menu) En 85
Restoring the default settings (INIT)
Restores the default settings for the unit.
Choices
Updating the firmware (UPDATE)
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from our website. If the unit is
connected to the Internet, you can download the firmware via the network. For details,
refer to the information supplied with updates.
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to
start firmware update.
Choices
If the unit detects newer firmware over the network, the envelope icon (p) will appear in the “Network
Update” screen. In this case, you can also update the unit’s firmware by following the procedure in
“Updating the unit’s firmware via the network” (p.89).
Checking the firmware version (VERSION)
Check the version of firmware currently installed on the unit.
You can also check the firmware version in “Network Update” (p.83) in the “Setup” menu.
It may take a while until the firmware version is displayed.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
INITCANCEL
UPDATEUSB
VERSIONxx.xx
CONFIGURATIONS Controlling external devices with the remote control En 86
You can use the unit’s remote control to operate external devices
(such as BD/DVD players) if you have registered the remote control
code of the external device.
You cannot control an external device that does not have a remote control sensor.
Ensure that the remote control ID of the external device is set to “ID1”. If any other
ID is selected, the remote control operations may not work properly.
If the unit’s remote control is without batteries for more than 2 minutes, the
registered codes may be cleared. If this happens, insert new batteries and register
the codes again.
Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all
the input selection keys. With this setting, you can control HDMI
Control-compatible devices connected to the unit with the remote control. (This
function may not work depending on the specification of the external device.)
Registering the remote control code for a TV
You can use the unit’s remote control to operate a TV if you have
registered its remote control code.
You can also register your TV’s remote control code to the unit’s input selection
keys (p.87). This would allow you to use the cursor keys or numeric keys to
operate the TV (this function may not be available on some TV models).
1
Use “Remote Control Code Search” in the CD-ROM
to find your TV’s remote control code.
If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
2
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
3
Press TV z.
4
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is successfully registered,
SOURCE/RECEIVER blinks twice.
If it blinks six times, registration has failed. Repeat from Step 2.
TV operations
Once you have registered the remote control code for your TV, you
can control it using the TV operation keys, regardless of the input
source selected on the unit.
Controlling external devices with the remote control
TV operation keys
INPUT Switches the video inputs of the TV.
MUTE Mutes the audio output of the TV.
TV VOL Adjust the volume of the TV.
TV CH Switch the channels of the TV
TV z Turns on/off the TV.
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
TUNER
FM
I
NF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
ENTER
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
M
O
D
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
NE
T
US
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
TV z
SOURCE/RECEIVER
CODE SET
Numeric keys
TV operation keys
CONFIGURATIONS Controlling external devices with the remote control En 87
Registering the remote control codes for
playback devices
You can use the unit’s remote control to operate playback devices if
you have registered their remote control codes. You can also use
the input selection keys to change the playback devices that are
controlled by the remote control, because their remote control
codes are assigned to the input selection keys.
If you assign the remote control code for an external device to the star ( or ★★)
key, you can operate the device with the remote control without switching the input
source after pressing the star key.
1
Use “Remote Control Code Search” in the CD-ROM
to find the remote control code for your playback
device.
If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
2
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
3
Press the input selection key.
For example, press HDMI 1 to set the remote control code
for the playback device connected to the HDMI 1 jack.
4
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is registered successfully,
SOURCE/RECEIVER blinks twice.
If it blinks six times, registration has failed. Repeat from Step 2.
For details on how to register a remote control code to a SCENE key, refer to
“Configuring scene assignments” (p.35).
Playback device operations
Once you have registered the remote control code for your
playback device, you can control it using the following keys after
selecting the input source or scene.
By pressing SOURCE/RECEIVER, you can switch the devices (the unit or
external device) that are operated by the menu operation keys, DISPLAY and
numeric keys. You can operate the unit when SOURCE/RECEIVER lights up in
orange, and an external device when SOURCE/RECEIVER lights up in green.
For example, if you register the remote control code of your BD/DVD player on
HDMI 1, you can operate the unit when SOURCE/RECEIVER lights up in orange,
and the BD/DVD player when SOURCE/RECEIVER lights up in green.
These keys work only if the corresponding function is available on your playback
device and if the device can be operated with an infrared remote control.
SOURCE z Turns on/off the playback device.
Menu operation
keys
Cursor keys Select an item.
ENTER Confirms a selected item.
RETURN Returns to the previous screen.
DISPLAY Switches information on the display.
External device
operation keys
TOP MENU Displays the top menu.
POP-UP
MENU
Displays the pop-up menu.
s Stops playback.
d Stops playback temporarily.
a
Starts playback of the selected
song/video.
h
Searches forward/backward (by
holding down).
j
f
Skips forward/backward.
g
Numeric keys Enter numerical values.
TV operation keys Control the TV (p.86).
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
TUNER
FM
I
NF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
D
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
M
O
D
E
TV
NE
T
RADI
O
S
LEEP
DISPLAY
SOURCE z
SOURCE/RECEIVER
CODE SET
External device
operation keys
Numeric keys
TV operation keys
Menu operation keys
Input selection keys
CONFIGURATIONS Controlling external devices with the remote control En 88
Resetting remote control codes
You can reset a remote control code registered to each input
selection key.
1
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
2
Press the input selection key.
3
Use the numeric keys to enter “5098”.
Once the remote control code is reset successfully,
SOURCE/RECEIVER blinks twice.
If it blinks six times, resetting has failed. Repeat from Step 1.
To reset the remote control to factory default settings
a Press CODE SET using a pointed object such as the tip of a ballpoint pen.
b Press SOURCE/RECEIVER.
c Use the numeric keys to enter “9981”.
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
TUNER
FM
I
NF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
ENTER
TV
TV
VO
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
O
PTI
O
N
S
ETUP
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
M
O
D
E
TV
NE
T
RADI
O
S
LEEP
SOURCE/RECEIVER
CODE SET
Numeric keys
Input selection keys
CONFIGURATIONS Updating the unit’s firmware via the network En 89
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.
You can also update the firmware using the USB memory device from the
“ADVANCED SETUP” menu (p.85).
1
Press SETUP.
2
Use the cursor keys to select “Network” and press
ENTER.
3
Use the cursor keys to select “Network Update” and
press ENTER.
If new firmware is available, the envelope icon (p) appears
in the “Network Update” screen.
To cancel the operation without updating the firmware, press SETUP.
4
Use the cursor keys to select “Perform Update” and
press ENTER.
The on-screen display turns off and the firmware update
starts.
5
If “UPDATE SUCCESS PLEASE POWER OFF!”
appears on the front display, press z (power) on the
front panel.
The firmware update is complete.
Updating the unit’s firmware via the network
Note
Do not operate the unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).
If the unit is connected to the wireless network via a wireless network adapter,
network update may not be possible depending on the condition of the
wireless connection. In this case, update the firmware using the USB memory
device (p.85).
To perform the following procedure, your TV must be connected to the unit via
HDMI. If not, perform the update from the “ADVANCED SETUP” menu (p.85).
p
Update:ENTER
Network Update
Perform Update
Firmware Version
System ID
x.xx
xxxxxxxx
Back:RETURN
Icon
SCENE
RETURN
VOLUME
ENHANCER
DIRECT
HDMI
MHL
AV
TUNER
FM
INFO
MEMORY
DAB
PRESET
MOVIE MUSIC
BD
DVD
MUTE
ENTER
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
RECEIVER
CODE SET
OPTION
SETUP
TUNING
STRAIGHT
SUR. DECODE
INPUT
MUTE
9 0
10
ENT
56 87
1234
MODE
TV
NET
RADIO
AUDIO
1 2
3
NET
USB
V-AUX
54
5
1 2 3 4
SLEEP
6
SC
EN
E
RETURN
V
O
LUME
ENHAN
C
E
R
DIRE
C
T
HDMI
MHL
AV
TUNER
FM
I
NF
O
MEM
O
RY
DA
B
PRE
S
ET
M
O
VIE
MU
SI
C
BD
DV
D
MUTE
TV
TV
VO
LT
V
C
H
T
O
P
MEN
U
PO
P-
U
P
MEN
U
DI
S
P
L
AY
SOU
R
C
E
RE
C
EIVE
R
CO
DE
S
ET
O
PTI
O
N
TUNIN
G
S
TRAI
G
H
T
S
U
R
.
DE
CO
D
E
INPUT
MUT
E
9
0
10
EN
T
6
5
8
7
1
2
3
4
M
O
D
E
TV
NE
T
RADI
O
A
U
DI
O
1
2
3
NE
T
US
B
V
-
AUX
5
4
5
1
2
3
4
S
LEEP
6
ENTER
SETUP
Cursor keys
APPENDIX Frequently asked questions En 90
APPENDIX
The new speaker system does not provide an ideal sound
balance...
If you have changed speakers or have a new speaker system, use YPAO to optimize
the speaker settings again (p.30). If you want to adjust the speaker settings manually,
use “Speaker” in the “Setup” menu (p.72).
Since we have small children, we want to set limitations on the
volume control...
If a small child accidentally operates the controls on the main unit or remote control, the
volume may suddenly increase. This may also cause injury or damage the unit or
speakers. We recommend using “Max Volume” in the “Setup” menu to set the maximum
volume level for the unit in advance (p.78).
I am occasionally startled by a sudden loud sound when turning
on the unit...
By default, the volume level when the unit last entered standby mode is automatically
applied. If you want to fix the volume, use “Initial Volume” in the “Setup” menu to set the
volume to be applied when the receiver is turned on (p.78).
We are bothered by volume differences when switching
between input sources…
You can correct volume differences between input sources by utilizing “Input Trim” in
the “Option” menu (p.67).
I made HDMI connections but HDMI Control does not work at
all...
To use HDMI Control, you need to perform the HDMI Control link setup (p.101). After
connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit,
enable HDMI Control on each device and perform the HDMI Control link setup. This
setup is required every time you add a new HDMI Control-compatible device to your
system. For information on how HDMI Control works between your TV and playback
devices, refer to the instruction manuals for each device.
I want to display a device name or a manufacture name on the
front display when selecting an input source...
By default, input source names (such as “HDMI 1” and “AV 1”) are displayed on the
front display when an input source is selected. If you want to rename them as you like,
use “Input Rename” (p.79) in the “Setup” menu. You can also select a name from the
presets (such as “Blu-ray” and “DVD”).
I want to prevent accidental changes to the settings...
You can protect the settings configured on the unit (such as speaker settings) by
utilizing “Memory Guard” in the “Setup” menu (p.80).
The unit’s remote control is simultaneously controlling another
Yamaha product as well as the unit...
When using multiple Yamaha products, the remote control may work on another
Yamaha product or another remote control may work on the unit. If this happens,
register different remote control IDs for the devices that you want to control with each
remote control (p.84).
I want to enjoy videos/audio played back on the video device
even when the unit is in standby mode…
If you have connected a video device to the unit with HDMI, you can output
videos/audio played back on the video device to the TV even when the unit is in
standby mode. To use this function, set “Standby Through” (p.75) in the “Setup” menu
to “On”. You can also switch the input source using the remote control of the unit when
this function is enabled.
Frequently asked questions
APPENDIX Troubleshooting En 91
Refer to the table below when the unit does not function properly.
If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
First, check the following:
a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets
securely.
b The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on.
c The connectors of each cable are securely inserted in to jacks on each device.
Power, system and remote control
Troubleshooting
Problem Cause Remedy
The power does not turn on.
The protection circuitry has been activated three times
consecutively. If the unit is in this condition, the standby indicator
on the unit blinks when you try to turn on the power.
As a safety precaution, capability to turn on the power is disabled. Contact your
nearest Yamaha dealer or service center to request repair.
The power does not turn off.
The internal microcomputer has frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down z (power) on the front panel for more than 10 seconds to initialize
and reboot the unit. (If the problem persists, disconnect the power cable from the
AC wall outlet and plug it again.)
The power turns off (standby mode) immediately. The unit was turned on while a speaker cable was shorted.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.15).
The unit enters standby mode automatically.
The sleep timer worked. Turn on the unit and start playback again.
The auto-standby function kicked in because the unit was not used
for the specified time.
To disable the auto-standby function, set “Auto Power Standby” in the “Setup”
menu to “Off” (p.78).
The protection circuitry has been activated because of a short
circuit.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.15).
The unit is not reacting.
The internal microcomputer is frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down z (power) on the front panel for more than 10 seconds to initialize
and reboot the unit. (If the problem persists, disconnect the power cable from the
AC wall outlet and plug it again.)
APPENDIX Troubleshooting En 92
The unit cannot be controlled using the remote
control.
The unit is out of the operating range. Use the remote control within the operating range (p.4).
The batteries are weak. Replace with new batteries.
The unit’s remote control sensor is exposed to direct sunlight or
strong lighting.
Adjust the lighting angle, or reposition the unit.
The remote control is set to control external devices.
Press SOURCE/RECEIVER to set the remote control to control the unit (the key
lights up in orange).
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.84).
External devices cannot be controlled using the
remote control.
The remote control is set to control the unit.
Press SOURCE/RECEIVER to set the remote control to control external devices
(the key lights up in green).
The corresponding remote control code is not set properly.
Set the remote control code again (p.86). Even if the remote control code is
registered properly, some products may not respond to the remote control.
The MHL-compatible mobile device cannot be
controlled using the remote control.
A remote control code for another playback device is assigned to
HDMI 5.
Reset the remote control code registered to HDMI 5 (p.88).
The mobile device or its application is not externally controllable. Directly operate the mobile device itself.
Problem Cause Remedy
APPENDIX Troubleshooting En 93
Audio
Problem Cause Remedy
No sound.
Another input source is selected. Select an appropriate input source with the input selection keys.
Signals that the unit cannot reproduce are being input.
Some digital audio formats cannot be played back on the unit. To check the audio
format of the input signal, use “Signal Info” in the “Option” menu (p.67).
The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.
The volume cannot be increased.
The maximum volume is set. Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.78).
A device connected to the output jacks of the unit is not turned on.
(This may happen due to the nature of AV receivers.)
Turn on all devices connected to the output jacks of the unit.
No sound is coming from a specific speaker.
The playback source does not contain a signal for the channel. To check it, use “Signal Info” in the “Option” menu (p.67).
The currently selected sound program/decoder does not use the
speaker.
To check it, use “Test Tone” in the “Setup” menu (p.74).
Audio output of the speaker is disabled.
Perform YPAO (p.30) or use “Configuration” in the “Setup” menu to change the
speaker settings (p.72).
The volume of the speaker is set too low.
Perform YPAO (p.30) or use “Level” in the “Setup” menu to adjust the speaker
volume (p.74).
The speaker cable connecting the unit and the speaker is
defective.
If there is no problem with the connection, replace with another speaker cable.
The speaker is malfunctioning.
To check it, replace with another speaker. If the problem persists, the unit may be
malfunctioning.
No sound is coming from the subwoofer.
The playback source does not contain LFE or low-frequency
signals.
To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the
front channel low-frequency components from the subwoofer (p.73).
Subwoofer output is disabled. Perform YPAO (p.30) or set “Subwoofer” in the “Setup” menu to “Use” (p.72).
The volume of the subwoofer is too low. Adjust the volume on the subwoofer.
The subwoofer has been turned off by its auto-standby function. Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
No sound from the playback device (connected to
the unit with HDMI).
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The unit is set not to output audio input through HDMI jacks from
the SPEAKERS terminals.
In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.75).
The number of devices connected to the HDMI OUT jack exceeds
the limit.
Disconnect some of the HDMI devices.
APPENDIX Troubleshooting En 94
Video
No sound from the TV (when HDMI Control is
used).
The TV is set to output audio from the TV speakers.
Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.
A TV that does not support ARC is connected to the unit only with
an HDMI cable.
Use a digital optical cable to make an audio connection (p.19).
(If the TV is connected to the unit with an audio cable)
The TV audio input setting does not match the actual connection.
Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack
(p.75).
(If you are trying to use ARC)
ARC is disabled on the unit or TV.
Set “ARC” in the “Setup” menu to “On” (p.76). Also, enable ARC on the TV.
Only the front speakers work on multichannel
audio.
The playback device is set to output 2-channel audio (such as
PCM) only.
To check it, use “Signal Info” in the “Option” menu (p.67). If necessary, change
the digital audio output setting on the playback device.
Noise/hum is heard.
The unit is too close to another digital or radio frequency device. Move the unit further away from the device.
The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable.
The sound is distorted.
The volume of the unit is too high. Turn down the volume. If “ECO Mode” is set to “On”, set it to “Off” (p.79).
A device connected to the unit’s output jacks is not turned on. Turn on all devices connected to the unit’s output jacks.
Problem Cause Remedy
No video.
Another input source is selected on the unit. Select an appropriate input source with the input selection keys.
Another input source is selected on the TV. Switch the TV input to display the video from the unit.
The video signal output from the unit is not supported by the TV.
Check the video output setting of the playback device. For information about
video signals supported by the TV, refer to the instruction manuals for the TV.
The cable connecting the unit and TV (or playback device) is
defective.
If there is no problem with the connection, replace with another cable.
No video from the playback device (connected to
the unit with HDMI).
The input video signal (resolution) is not supported by the unit.
To check the information about the current video signal (resolution), use “Signal
Info” in the “Option” menu (p.67). For information about video signals supported
by the unit, see “HDMI signal compatibility” (p.103).
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The number of devices connected to the HDMI OUT jack is over
the limit.
Disconnect some of the HDMI devices.
The menu of the unit is not displayed on the TV.
The TV is not connected to the unit via HDMI.
You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them (p.17 to 20).
Another input source is selected on the TV. Switch the TV input to display the video from the unit (HDMI OUT jack).
Problem Cause Remedy
APPENDIX Troubleshooting En 95
DAB radio
FM radio
Problem Cause Remedy
No DAB radio reception. An initial scan has not been performed. Perform an initial scan to receive DAB radio (p.42).
No DAB radio reception even after performing an
initial scan.
Reception strength of DAB radio is poor.
Check reception strength in “Tune Aid” in the “Option” menu (p.45), and adjust
the antenna height or orientation, or place it in a different location.
There is no DAB coverage in your area.
Check with your dealer or WorldDMB online at “http://www.worlddab.org” for a
listing of the DAB coverage in your area.
DAB radio reception is weak or noisy.
There is multi-path interference.
Check reception strength in “Tune Aid” in the “Option” menu (p.45), and adjust
the antenna height or orientation, or place it in a different location.
Your area is too far from the DAB station transmitter.
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
DAB information is not available or is inaccurate.
The selected DAB radio station may be temporarily out of service
or may not provide information.
Contact the DAB broadcaster.
No DAB radio sound. The selected DAB radio station may be temporarily out of service. Try the station later or select another station.
Problem Cause Remedy
FM radio reception is weak or noisy.
There is multi-path interference. Adjust the antenna height or orientation, or place it in a different location.
Your area is too far from the FM station transmitter.
Press MODE to select monaural FM radio reception (p.46).
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
FM radio stations cannot be selected
automatically.
Your area is too far from the FM station transmitter.
Select the station manually (p.46).
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
APPENDIX Troubleshooting En 96
USB and network
Problem Cause Remedy
The unit does not detect the USB device.
The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again.
The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format.
Folders and files in the USB device cannot be
viewed.
The data in the USB device is protected by the encryption. Use a USB device without an encryption function.
The network feature does not function.
The network parameters (IP address) have not been obtained
properly.
Enable the DHCP server function on your router and set “DHCP” in the “Setup”
menu to “On” on the unit (p.81). If you want to configure the network parameters
manually, check that you are using an IP address which is not used by other
network devices in your network (p.81).
The unit does not detect the PC.
The media sharing setting is not correct.
Configure the sharing setting and select the unit as a device to which music
contents are shared (p.57).
Some security software installed on your PC is blocking the access
of the unit to your PC.
Check the settings of security software installed on your PC.
The unit and PC are not in the same network.
Check the network connections and your router settings, and then connect the
unit and the PC to the same network.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your PC to allow it to access to the unit (p.82).
The files in the PC cannot be viewed or played
back.
The files are not supported by the unit or the media server.
Use the file format supported by both the unit and the media server. For
information about the file formats supported by the unit, see “Playing back music
stored on media servers (PCs/NAS)” (p.57).
The Internet radio cannot be played.
The selected Internet radio station is currently not available.
There may be a network problem at the radio station, or the service may have
been stopped. Try the station later or select another station.
The selected Internet radio station is currently broadcasting
silence.
Some Internet radio stations broadcast silence at certain of times of the day. Try
the station later or select another station.
Access to the network is restricted by the firewall settings of your
network devices (such as the router).
Check the firewall settings of your network devices. The Internet radio can be
played only when it passes through the port designated by each radio station.
The port number varies depending on the radio station.
The application for smartphone/tablet “AV
Controller” does not detect the unit.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your smartphone/tablet to allow it to access to the
unit (p.82).
The unit and smartphone/tablet are not in the same network.
Check the network connections and your router settings, and then connect the
unit and smartphone/tablet to the same network.
Firmware update via the network is failed. It may not be possible depending on the condition of the network. Update the firmware via the network again or use a USB memory device (p.85).
APPENDIX Error indications on the front display En 97
Error indications on the front display
Message Cause Remedy
Access denied Access to the PC is denied.
Configure the sharing settings and select the unit as a device to which music contents are shared
(p.57).
Access error
The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The unit cannot access the iPod. Turn off the iPod and turn it on again.
The connected iPod is not supported by the unit. Use an iPod supported by the unit (p.50).
There is a problem with the signal path from the network to the unit.
Make sure your router and modem are turned on.
Check the connection between the unit and your router (or hub) (p.27).
Check SP Wires The speaker cables short circuit. Twist the bare wires of the cables firmly and connect to the unit and speakers properly.
Internal Error An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center.
MHL Overloaded
An overcurrent is flowing through the MHL-compatible mobile
device.
Turn off the unit and check the connection between the unit and mobile device.
No content There are no playable files in the selected folder. Select a folder that contains files supported by the unit.
No device
The unit cannot detect the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The unit cannot detect the iPod. Turn off the iPod and then turn it on again.
Please wait The unit is preparing for connecting to the network.
Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn
it on again.
RemID Mismatch
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.84).
Unable to play
The unit cannot play back the songs stored on the iPod for some
reason.
Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be
defective.
The unit cannot play back the songs stored on the PC for some
reason.
Check if the format of files you are trying to play is supported by the unit. For information about the
formats supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.57). If
the unit supports the file format, but still cannot play back any files, the network may be overloaded with
heavy traffic.
Version error Firmware update is failed. Update the firmware again.
APPENDIX Glossary En 98
Audio information
Audio decoding format
Dolby Digital
Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
Dolby Digital Plus
Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing multichannel audio systems
that support Dolby Digital. This technology is used for audio on BD (Blu-ray discs).
Dolby Pro Logic II
Dolby Pro Logic II enables 5-channel playback from 2-channel sources. There are three modes available:
“Music mode” for music sources, “Movie mode” for movie sources, and “Game mode” for game sources.
Dolby TrueHD
Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to offer a
high-definition home theater experience with the quality of the studio master. Dolby TrueHD can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray discs).
DTS 96/24
DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit audio. This
format remains fully compatible with the existing multichannel audio systems that support DTS Digital
Surround. This technology is used for music DVDs, etc.
DTS Digital Surround
DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
DTS-ES
DTS-ES creates total 6.1-channel audio from 5.1-channel sources that are recorded with DTS-ES. This
decoder adds a surround back sound to the original 5.1-channel sound. In the DTS-ES Matrix 6.1 format, a
surround back sound is recorded in the surround channels, and in the DTS-ES Discrete 6.1 format, a
discrete surround back channel is recorded.
DTS Express
DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a higher
compression rate than the DTS Digital Surround format developed by DTS, Inc. This technology is
developed for audio streaming services on the Internet and secondary audio on BD (Blu-ray discs).
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that supports
7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully compatible with the
existing multichannel audio systems that support DTS Digital Surround. This technology is used for audio on
BD (Blu-ray discs).
DTS-HD Master Audio
DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home
theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray discs).
DTS Neo:6
DTS Neo:6 enables 6-channel playback from 2-channel sources. There are two modes available: “Music
mode” for music sources and “Cinema mode” for movie sources. This technology provides discrete
full-bandwidth matrix channels of surround sound.
DSD (Direct Stream Digital)
DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as SACD (Super
Audio CDs). The signals are stored at a high-frequency sampling rate of 2.8224 MHz. The highest
frequency response is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This technology
offers better audio quality than that used for CDs.
FLAC
FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed audio
formats in compression rate but provides higher audio quality.
MP3
One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this
compression method achieves a high compression rate. Reportedly, it is capable of compressing data
quantity by about 1/10 maintaining a certain level of audio quality.
MPEG-4 AAC
An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio streaming
services on Internet because it allows a high compression rate of data while maintaining better audio quality
than MP3.
PCM (Pulse Code Modulation)
PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted. This
technology is the basis of all other audio format. This technology is used as a lossless audio format called
Linear PCM for audio on a variety of media, including CDs and BD (Blu-ray discs).
Glossary
APPENDIX Glossary En 99
Sampling frequency/Quantization bit
Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal
is digitized. These values are noted as in the following example: “48 kHz/24-bit”.
Sampling frequency
Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate.
When the sampling frequency is higher, the range of frequencies that can be played back are wider.
Quantization bit
The number of quantization bits indicate the degree of accuracy when converting the sound level into a
numeric value. When the number of quantized bits is higher, the expression of the sound level is more
accurate.
WAV
Windows standard audio file format, which defines the method of recording the digital data obtained by
converting audio signals. By default, the PCM method (no compression) is used, but you can also use other
compression methods.
WMA (Windows Media Audio)
One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic
technologies, this compression method achieves a high compression rate. Reportedly, it is capable of
compressing data quantity by about 1/20 maintaining a certain level of audio quality.
Others
LFE (Low Frequency Effects) 0.1 channel
This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to 120 Hz. This
channel is added to the channels for all bands with Dolby Digital or DTS to enhance low frequency audio
effects. This channel is labeled 0.1 because it is limited to only low frequency audio.
Lip sync
Video output sometimes lags behind audio output due to the complexity of signal processing caused by an
increase in video signal capacity. Lip sync is a technique for automatically correcting the timing lag
between audio and video output.
HDMI and video information
Component video signal
With the component video signal system, the video signal is separated into the Y signal for luminance and
the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because
each of these signals is independent.
Composite video signal
With the composite video signal system, color, brightness, and synchronization data signals are combined
and transmitted with a single cable.
Deep Color
Deep Color is a technology that HDMI specification supports. Deep Color increases the number of available
colors within the boundaries defined by the RGB or YCbCr color space. Conventional color systems
process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits. This technology
allows HDTVs and other displays to increase from millions of colors to billions of colors and eliminate
on-screen color banding for smooth tonal transitions and subtle gradations between colors.
HDMI
HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/video
signal transmission. This interface transmits both digital audio and digital video signals using a single cable
without any loss. HDMI complies with HDCP (High-bandwidth Digital Content Protection) and provides a
secure audio/video interface. For further information on HDMI, visit the HDMI website at
“http://www.hdmi.org/”.
MHL
MHL (Mobile High-definition Link) is the interface standard for high-speed digital video signal transmission
that is developed for mobile devices. This interface transmits both digital audio and digital video signals
from mobile devices (such as smartphones) using a single cable with any loss. As with HDMI, MHL
complies with HDCP (High-bandwidth Digital Content Protection).
x.v.Color
“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color space than
sRGB and allows the expression of colors that were not hitherto possible. While remaining compatible with
the color gamut of sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid,
natural images.
APPENDIX Glossary En 100
Yamaha technologies
CINEMA DSP (Digital Sound Field Processor)
Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is
best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions
(such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are
differences in the sound that you hear. Based on a wealth of actually measured data, CINEMA DSP,
Yamaha’s original DSP technology provides the audiovisual experience of a movie theater in your own
home.
CINEMA DSP 3D
The actually measured sound field data contain the information of the height of the sound images. CINEMA
DSP 3D mode achieves the reproduction of the accurate height of the sound images so that it creates the
accurate and intensive 3D sound fields in a listening room.
Compressed Music Enhancer
The Compressed Music Enhancer feature compensates for missing harmonics in compression music
formats (such as MP3). As a result, this technology provides improved performance for the overall sound
system.
SILENT CINEMA
Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for
headphones have been set for each sound program, so that accurate representations of all the sound
programs can be enjoyed on headphones.
Virtual CINEMA DSP
Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround speakers with
front left and right speakers. Even if the surround speakers are not connected, the unit creates the realistic
sound field in a listening room.
Virtual Presence Speaker (VPS)
Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field without
front presence speakers. Even if the front presence speakers are not connected, the unit creates the 3D
sound field in your room.
APPENDIX Information on HDMI En 101
Video signal flow
Video signals input from a video device to the unit are output to a TV as shown below.
HDMI Control
HDMI Control allows you to operate external devices via HDMI. If you connect a TV that
supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as
power and volume) with TV remote control operations. You can also control playback
devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with
an HDMI cable.
For details on connections, see “Connecting a TV” (p.17) and “Connecting video
devices (such as BD/DVD players)” (p.22).
Operations available from the TV’s remote control
Standby synchronization
Volume control including mute
Switching to input audio from the TV when the TV input is switched to its built-in tuner
Switching to input video/audio from the selected playback device
Switching between audio output devices (the unit or TV speaker)
(Example)
Operations available from the unit’s remote control
Starting playback on the playback device and turning on the TV with a scene
selection (p.35)
Switching the TV input to display the “Setup” menu (when SETUP is pressed)
Controlling the playback device (playback and menu operations) without registering
remote control codes (p.87)
HDMI
PR
PB
Y
COMPONENT
VIDEO
HDMI
PR
PB
Y
COMPONENT
VIDEO
HDMI
PR
PB
Y
COMPONENT
VIDEO
HDMI
PR
PB
Y
COMPONENT
VIDEO
VIDEO VIDEO VIDEOVIDEO
Video device The unit TV
HDMI outHDMI in
COMPONENT VIDEO
in
VIDEO in
COMPONENT VIDEO
out
VIDEO out
Information on HDMI
HDMI Control
Turn off the TV
The unit turns off
(standby)
HDMI Control
Playback device
also turns off
APPENDIX Information on HDMI En 102
(Example)
To use HDMI Control, you need to perform the following HDMI Control link setup after
connecting the TV and playback devices.
This setup is required every time you add a new HDMI Control-compatible device to your system.
1
Turn on the unit, TV, and playback devices.
2
Enable HDMI Control on the unit, TV, and playback devices (such as
HDMI Control-compatible BD/DVD players).
To enable HDMI Control on the unit, set “HDMI Control” (p.75) in the “Setup”
menu to “On” and configure the related items (“TV Audio Input”, “Standby
Sync”, “ARC”, and “SCENE”).
3
Turn off the main power of the TV and then turn off the unit and
playback devices.
4
Turn on the unit and playback devices and then turn on the TV.
5
Switch the TV input to display the video from the unit.
6
Check the followings.
On the unit: The input to which the playback device is connected is selected.
If not, select the input source manually.
On the TV: The video from the playback device is displayed.
7
Check that the unit is properly synchronized with the TV by turning
off the TV or adjusting the TV volume with the TV remote control.
If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in
Step 3. It may solve the problem. Also, HDMI Control may not work if the number of connected devices
exceeds the limit. In this case, disable HDMI Control on the devices not in use.
If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
We recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
HDMI Control
Press SCENE (BD/DVD)
Turns on and displays
video from the playback
device
HDMI Control
Playback starts
APPENDIX Information on HDMI En 103
HDMI signal compatibility
Audio signals
Video signals
The unit is compatible with the video signals of the following resolutions:
When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending
on the type of the DVD player.
The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction
manual for each device.
To decode audio bitstream signals on the unit, set the input source device appropriately so that the device
outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual for the playback device.
Audio signal type Audio signal format Compatible media (example)
2ch Linear PCM 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio
Multichannel Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit
DVD-Audio, BD (Blu-ray disc),
HD DVD
DSD 2 to 5.1ch, 2.8224 MHz, 1 bit SACD
Bitstream Dolby Digital, DTS DVD-Video
Bitstream
(High definition audio)
Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio, DTS-HD
High Resolution Audio, DTS
Express
BD (Blu-ray disc), HD DVD
VGA 720p/60 Hz, 50 Hz
480i/60 Hz 1080i/60 Hz, 50 Hz
576i/50 Hz 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
480p/60 Hz 4K/30 Hz, 25 Hz, 24 Hz
576p/50 Hz
APPENDIX Reference diagram (rear panel) En 104
The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections.
Reference diagram (rear panel)
FRONT CENTER SURROUND
AV 1
AV 2
AV 3
AV 5
AV 6
OPTICAL COAXIAL COAXIAL OPTICAL
(
TV
)
COMPONENT
VIDEO
COMPONENT
VIDEO
P
B
Y
VIDEO
AV
MONITOR OUT
OUT
AUDIO
AV 4
P
R
P
B
Y
P
R
NETWORK
ANTENNA
DAB/FM
75
SPEAKERS
HDMI 1
(
BD/DVD
)
HDMI 2
HDMI 3
HDMI 4
HDMI
OUT
ARC
(
RADIO
)
SUBWOOFER
PRE OUT
HDMI 5
MHL
DC OUT
5V 0.5A
5V 1A
(
NET
)
APPENDIX Trademarks En 105
Manufactured under license from Dolby Laboratories. Dolby, Pro
Logic and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195;
7,272,567 & other U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that
an electronic accessory has been designed to connect specifically
to iPod, iPhone, or iPad, respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone, or iPad
may affect wireless performance.
AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in the U.S. and other
countries.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS
and Thomson.
This receiver supports network connections.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
MHL and the MHL logo are a trademark, registered trademark or
service mark of MHL, LLC in the United States and/or other countries.
x.v.Color™
“x.v.Color” is a trademark of Sony Corporation.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
DLNA™ and DLNA CERTIFIED™ are trademarks or registered
trademarks of Digital Living Network Alliance. All rights reserved.
Unauthorized use is strictly prohibited.
Windows™
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
Internet Explorer, Windows Media Audio and Windows Media Player
are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Android™
Android is a trademark of Google Inc.
The unit supports DAB/DAB+ tuning.
Trademarks
APPENDIX Specifications En 106
Input jacks
• Analog Audio
Audio x 4 (AV 5–6, AUDIO, V-AUX [Mini Jack])
• Digital Audio (Supported frequencies: 32 kHz to 96 kHz)
Optical x 2 (AV 1, AV 4)
Coaxial x 2 (AV 2–3)
•Video
Composite x 5 (AV 3–6, V-AUX)
Component x 2 (AV 1–2)
• HDMI Input
HDMI x 5 (HDMI 1–5*)
* HDMI 5: MHL input compatible
• Other jacks
USB x 1 (USB2.0)
NETWORK x 1 (100Base-TX/10Base-T)
Output jacks
• Analog Audio
- Speaker Out x 5 (FRONT L/R, CENTER, SURROUND L/R)
- Subwoofer Out x 1
- AV OUT x 1
- Headphone x 1
•Video
MONITOR OUT
- Component x 1
- Composite x 1
AV OUT
- Composite x 1
• HDMI Output
HDMI OUT x 1
Other jacks
• YPAO MIC x 1
• DC OUT x 1
HDMI
• HDMI features: Deep Color, “x.v.Color,” Auto Lip Sync, ARC
(Audio Return Channel), 3D, 4K
• Video Format (Repeater Mode)
-VGA
- 480i/60 Hz
- 576i/50 Hz
- 480p/60 Hz
- 576p/50 Hz
- 720p/60 Hz, 50 Hz
- 1080i/60 Hz, 50 Hz
- 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
- 4K/30 Hz, 25 Hz, 24 Hz
• Audio Format
-Dolby TrueHD
- Dolby Digital Plus
- Dolby Digital
- DTS-HD Master Audio
- DTS-HD High Resolution Audio
- DTS Express
-DTS
- DSD 2-ch to 6-ch
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
• Content Protection: HDCP compatible
• Link Function: CEC supported
MHL
• Video Format (Repeater Mode)
-VGA
- 480i/60 Hz
- 576i/50 Hz
- 480p/60 Hz
- 576p/50 Hz
- 720p/60 Hz, 50 Hz
- 1080i/60 Hz, 50 Hz
- 1080p/30 Hz, 25 Hz, 24 Hz
Audio Format
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
Current Supply Capacity: 1.0 A
TUNER
Analog Tuner
[Australia model]
DAB/FM x 1 (TUNER)
[U.K. and Europe models]
DAB/FM with Radio Data System x 1 (TUNER)
USB
• Capable of iPod, Mass Storage Class USB Memory
Current Supply Capacity: 2.1 A
Network
PC Client Function
• Compatible with DLNA ver. 1.5
• AirPlay supported
Internet Radio
Compatible Decoding Formats
• Decoding Format
- Dolby TrueHD, Dolby Digital Plus
- Dolby Digital
- DTS-HD Master Audio, DTS-HD High Resolution Audio,
DTS Express
- DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
- DTS Digital Surround
• Post Decoding Format
- Dolby Pro Logic
- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,
Dolby Pro Logic II Game
- DTS Neo:6 Music, DTS Neo:6 Cinema
Specifications
APPENDIX Specifications En 107
Audio Section
• Rated Output Power (2-channel driven)
(20 Hz to 20 kHz, 0.09% THD, 6 )
Front L/R .................................................................80 W+80 W
• Rated Output Power (1-channel driven)
(1 kHz, 0.9% THD, 6 )
Front L/R .................................................................... 115 W/ch
Center ....................................................................... 115 W/ch
Surround L/R.............................................................. 115 W/ch
• Dynamic Power (IHF)
Front L/R (6/4/2 ) ............................................ 110/130/160 W
• Damping Factor
Front L/R, 20 Hz to 20 kHz, 8 ............................. 120 or more
• Input Sensitivity / Input Impedance
AV 5 etc. (1 kHz, 100 W/8 )..............................200 mV/47 k
• Maximum Input Signal
AV 5 etc. (1 kHz, 0.5% THD, Effect On) ........................... 2.3 V
• Output Level / Output Impedance
AV OUT ..............................................................200 mV/1.2 k
SUBWOOFER ...........................................................1 V/1.2 k
• Headphone Jack Rated Output / Impedance
AV 5 etc. (1 kHz, 50 mV, 8 ) .............................100 mV/470
• Frequency Response
AV 5 etc. to Front (10 Hz to 100 kHz) ......................... +0/-3 dB
• Signal to Noise Ratio (IHF-A Network)
AV 5 etc.
(Input Shorted 250 mV, Speaker Out)
..........................................................................100 dB or more
• Residual Noise (IHF-A Network)
Front L/R (Speaker Out)......................................150 µV or less
• Channel Separation
AV 5 etc. (Input 5.1 k Shorted, 1 kHz/10 kHz)
................................................................. 60 dB/45 dB or more
• Volume Control
Range ............................................. MUTE, -80 dB to +16.5 dB
Step ................................................................................0.5 dB
• Tone Control Characteristics
Bass Boost/Cut............................. ±6 dB/0.5 dB Step at 50 Hz
Bass Turnover ............................................................... 350 Hz
Treble Boost/Cut..........................±6 dB/0.5 dB Step at 20 kHz
Treble Turnover..............................................................3.5 kHz
• Filter Characteristics
(fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround)................................ 12 dB/oct.
L.P.F. (Subwoofer)..................................................... 24 dB/oct.
Video Section
• Video Signal Type............................................................... PAL
• Video Signal Level
Composite ............................................................. 1 Vp-p/75
Component
Y ......................................................................... 1 Vp-p/75
Pb/Pr................................................................ 0.7 Vp-p/75
• Video Maximum Input Level...........................1.5 Vp-p or more
• Video Signal to Noise Ratio ................................50 dB or more
• Monitor Out Frequency Response
Component............................................ 5 Hz to 60 MHz, -3 dB
DAB Section
• Tuning Range .................................. 174 to 240 MHz (Band III)
• Support Audio Format
......................... MPEG 1 Layer II/MPEG 4 HE AAC v2 (AAC+)
Antenna.........................................................75 unbalanced
FM Section
• Tuning Range .......................................... 87.50 to 108.00 MHz
• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
Mono .................................................................3 µV (20.8 dBf)
• Signal to Noise Ratio (IHF)
Mono ............................................................................... 71 dB
Stereo .............................................................................. 69 dB
• Harmonic Distortion (IHF, 1 kHz)
Mono .................................................................................0.3%
Stereo ................................................................................0.5%
Antenna Input................................................ 75 unbalanced
General
• Power Supply
[Australia model]............................................. AC 240 V, 50 Hz
[U.K. and Europe models] .............................. AC 230 V, 50 Hz
• Power Consumption........................................................280 W
• Standby Power Consumption
HDMI Control Off, Standby Through Off .............. 0.1 W or less
HDMI Control On, Standby Through On (No Signals)
.......................................................................... 1.0 W (Typical)
Network Standby On......................................... 2.0 W (Typical)
Dimensions (W x H x D)
......................435 x 161 x 315 mm (17-1/8” x 6-3/8” x 12-3/8”)
* Including legs and protrusions
Weight .............................................................8.1 kg (17.9 lbs)
* Specifications are subject to change without notice.
APPENDIX Index En 108
Symbols
/★★ keys 10
Envelope icon (p) 89
Lock icon (o) 80
Numerics
2.1-channel system 13
2ch Stereo (sound program) 38
3.1-channel system 13
4.1-channel system 13
4K signal (video signal resolution) 103
5.1-channel system 13
, 14
5ch Stereo (sound program) 38
A
A.DRC (DSP/Surround, Option menu) 66
Access denied (error indication) 97
Access error (error indication) 97
Action Game (sound program) 37
Adaptive DRC (DSP/Surround, Option menu) 66
Adjustment (Lipsync, Setup menu) 77
ADVANCED SETUP menu 84
Adventure (sound program) 37
AirPlay 62
Amp (Audio Output, Setup menu) 75
ARC (Audio Return Channel) 17
ARC (HDMI, Setup menu) 76
Audio Decoder (front display information) 64
Audio device connection 25
Audio file format (PC/NAS) 57
Audio file format (USB storage device) 54
Audio In (Option menu) 68
AUDIO jack 16
Audio Mode (DAB) 44
Audio Output (HDMI, Setup menu) 75
Audio Return Channel (ARC) 17
Auto Power Standby (ECO, Setup menu) 78
Auto Preset (FM radio, Option menu) 47
Automatic speaker setting optimization 30
Automatic station preset (FM radio) 47
AutoPowerStdby (ECO, Setup menu) 78
AV OUT jack 9
B
B RATE (Signal Info, Option menu) 67
Banana plug 15
Basic playback operation 34
Bass (Tone Control, Option menu) 66
Bitrate (Signal Info, Option menu) 67
Bitstream 103
C
CAT-5 cable 27
Cellar Club (sound program) 38
Center (Speaker, Setup menu) 72
Center Image (DSP Parameter, Setup menu) 77
Center Width (DSP Parameter, Setup menu) 77
CH Label/Freq. (DAB) 44
Chamber (sound program) 38
CHAN (Signal Info, Option menu) 67
Channel (Signal Info, Option menu) 67
Check SP Wires (error indication) 97
CINEMA DSP 37
CINEMA DSP 3D 39
CINEMA DSP 3D Mode
(DSP Parameter, Setup menu) 76
Clear Preset (DAB radio, Option menu) 44
Clear Preset (FM radio, Option menu) 48
Clock Time (Radio Data System) 49
COAXIAL jack 16
Component video cable 16
Component video connection (video device) 23
COMPONENT VIDEO jack 16
Composite video connection (video device) 23
Compressed Music Enhancer 41
Configuration (HDMI, Setup menu) 75
Configuration (Speaker, Setup menu) 72
Crossover (Speaker, Setup menu) 73
Crossover frequency setting 73
Crossover frequency setting (subwoofer) 30
D
DAB (Digital Audio Broadcasting) 42
DAB information 44
DAB radio listening 42
DAB radio tuning 42
DAB/FM antenna connection 26
DAB+ 42
Date And Time (DAB) 44
DC OUT (Function, Setup menu) 80
DC OUT jack 9
Decoder Off (front display information) 64
Default Gateway (Information, Setup menu) 81
Default Gateway (IP Address, Setup menu) 81
DHCP (IP Address, Setup menu) 81
Digital Audio Broadcasting 42
Digital coaxial cable 16
Digital Media Controller (DMC) 82
Digital optical cable 16
Dimension (DSP Parameter, Setup menu) 77
Dimmer (Function, Setup menu) 80
DIRECT (sound mode) 40
Direct playback 40
Direct Stream Digital (DSD) 98
Distance (Speaker, Setup menu) 74
DLNA 57
DLS (Dynamic Label Segment) (DAB) 44
DMC (Digital Media Controller) 82
DMC Control (Network, Setup menu) 82
DNS Server (Information, Setup menu) 81
DNS Server (IP Address, Setup menu) 81
Dolby Pro Logic (surround decoder) 40
Dolby Pro Logic II Game (surround decoder) 40
Dolby Pro Logic II Movie (surround decoder) 40
Index
APPENDIX Index En 109
Dolby Pro Logic II Music (surround decoder) 40
Drama (sound program) 37
DSD (Direct Stream Digital) 98
DSP Level (DSP/Surround, Option menu) 66
DSP Parameter (Sound, Setup menu) 76
DSP Program (front display information) 64
DSP/Surround (Option menu) 66
DTS Neo:6 Cinema (surround decoder) 40
DTS Neo:6 Music (surround decoder) 40
Dynamic Range (Volume, Setup menu) 78
E
ECO (Setup menu) 78
ECO Mode (Setup menu) 79
Enhancer (DSP/Surround, Option menu) 66
ENHANCER (sound mode) 41
Ensemble Label (DAB) 44
EQ Select (Equalizer, Setup menu) 74
Equalizer (Speaker, Setup menu) 74
Error indication (front display) 97
External device control (remote control) 86
External device operation key (remote control) 10
Extra Bass (Speaker, Setup menu) 73
F
Filter (MAC Address Filter, Setup menu) 82
Firmware update 85
Firmware update (network) 85
, 89
Firmware update (USB) 85
Firmware Version (Network Update, Setup menu) 83
Firmware version check 85
FM antenna connection 26
FM radio listening 46
FM radio tuning 46
FORMAT (Signal Info, Option menu) 67
Format (Signal Info, Option menu) 67
Frequency (FM radio) 46
Front (Speaker, Setup menu) 72
Front display (part names and functions) 8
Front display brightness 80
Front display information 64
Front panel (part names and functions) 7
Front panel jack connection 25
Function (Setup menu) 79
G
GEQ (Equalizer, Setup menu) 74
H
Hall in Munich (sound program) 38
Hall in Vienna (sound program) 38
HDMI (Setup menu) 75
HDMI cable 16
HDMI connection (video device) 22
HDMI Control (HDMI, Setup menu) 75
HDMI jack 16
HDMI OUT (TV) (Audio Output, Setup menu) 75
HDMI signal compatibility 103
Headphones 41
High definition audio 103
High speed HDMI cable 16
I
In.Trim (Volume Trim, Option menu) 67
Indicator (part names and functions) 8
INFO key 7
, 10
Information (Network, Setup menu) 81
Information display (front display) 8
Information switching (front display) 64
INIT (ADVANCED SETUP menu) 85
Init Scan (DAB radio, Option menu) 42
Initial Volume (Volume, Setup menu) 78
Input (front display information) 64
Input (Signal Info, Option menu) 67
Input Rename (Function, Setup menu) 79
Input selection key (remote control) 10
Input Trim (Volume Trim, Option menu) 67
Interlock (Option menu) 68
Internal Err. (YPAO error message) 32
Internal Error (error indication) 97
Internet radio listening 60
IP Address (Information, Setup menu) 81
IP Address (Network, Setup menu) 81
iPod charge 50
iPod connection 50
iPod content playback 51
iPod content playback (AirPlay) 62
iTunes content playback (AirPlay) 62
L
Language (Setup menu) 83
Level (Speaker, Setup menu) 74
Level Error (YPAO warning message) 33
LFE (Low Frequency Effects) 99
Lipsync 99
Lipsync (Option menu) 67
Lipsync (Sound, Setup menu) 77
Low Frequency Effects (LFE) 99
M
MAC Address (Information, Setup menu) 81
MAC Address (MAC Address Filter, Setup menu) 82
MAC Address Filter (Network, Setup menu) 82
Manual station preset (FM radio) 47
Max Volume (Volume, Setup menu) 78
Media sharing setup 57
Memory Guard (Function, Setup menu) 80
Menu language selection 29
Menu operation key (remote control) 10
MHL cable 16
MHL connection 22
MHL jack 16
MHL Overloaded (error indication) 97
MHL-compatible mobile device 22
MODE key 10
Monaural reception (FM radio) 46
Mono Movie (sound program) 37
MOVIE (sound program category) 37
MUSIC (sound program category) 38
Music Video (sound program) 38
MUTE key 10
Muting 34
APPENDIX Index En 110
N
NAS (Network Attached Storage) 27
NAS connection 27
NAS content playback 57
Network (Setup menu) 81
Network Attached Storage (NAS) 27
Network cable 27
Network connection 27
Network information 81
Network Name (Network, Setup menu) 82
Network Standby (Network, Setup menu) 82
Network Update (Network, Setup menu) 83
No content (error indication) 97
No device (error indication) 97
No Front SP (YPAO error message) 32
No MIC (YPAO error message) 32
No Signal (YPAO error message) 32
No Sur. SP (YPAO error message) 32
Noisy (YPAO error message) 32
NTSC (TV FORMAT, ADVANCED SETUP menu) 84
Numeric key (remote control) 10
O
OPTICAL jack 16
OPTION key 10
Option menu 65
Out of Phase (YPAO warning message) 33
Output (Signal Info, Option menu) 67
Over Distance (YPAO warning message) 33
P
PAL (TV FORMAT, ADVANCED SETUP menu) 84
Panorama (DSP Parameter, Setup menu) 76
PC connection 27
PC content playback 57
PEQ (Equalizer, Setup menu) 74
Perform Update (Network Update, Setup menu) 83
PHONES jack 7
Playback device connection 22
Playback device operation (remote control) 87
Please wait (error indication) 97
Power cable connection 28
Power management 78
Power Mode (DC OUT, Setup menu) 80
Preset station selection (DAB radio) 43
Preset station selection (FM radio) 48
Program Service (Radio Data System) 49
Program Type (DAB) 44
Program Type (Radio Data System) 49
R
Radio Data System (FM radio) 49
Radio Data System information 49
Radio Data System tuning 49
Radio Text (Radio Data System) 49
Rear panel (part names and functions) 9
Recording device connection 28
RemID Mismatch (error indication) 97
Remote control (part names and functions) 10
Remote control code registration
(playback device) 87
Remote control code registration (TV) 86
Remote Control Code Search 86
, 87
Remote control ID setting 84
Remote control ID setting (remote control) 84
Remote control sensor 7
Remote control signal transmitter (remote control) 10
REMOTE ID (ADVANCED SETUP menu) 84
Rename (input name) 79
Rename (network name) 82
Repeat (iPod, Option menu) 53
Repeat (PC/NAS, Option menu) 59
Repeat (USB storage device, Option menu) 56
Reset (remote control) 88
Roleplaying Game (sound program) 37
Router connection 27
S
SAMPL (Signal Info, Option menu) 67
Sampling (Signal Info, Option menu) 67
SCENE (HDMI, Setup menu) 76
Scene configuration 35
SCENE function 35
SCENE link playback 35
Sci-Fi (sound program) 37
Select (Lipsync, Setup menu) 77
Service Label (DAB) 44
SETUP key 10
Setup menu 69
Shuffle (iPod, Option menu) 53
Shuffle (PC/NAS. Option menu) 59
Shuffle (USB storage device, Option menu) 56
Signal Info (Option menu) 67
Signal information 67
Signal Quality (DAB) 44
SILENT CINEMA 41
Simple play (iPod) 52
SLEEP key 10
Sleep timer 10
Sound (Setup menu) 76
Sound field effect 37
Sound mode selection 36
Sound program 37
Speaker (Setup menu) 72
Speaker cable connection 15
Speaker connection 14
Speaker indicator (front display) 8
Speaker placement 12
Spectacle (sound program) 37
Sports (sound program) 37
Standard (sound program) 37
Standby indicator (front panel) 7
Standby Sync (HDMI, Setup menu) 76
Standby Through (HDMI, Setup menu) 75
Station preset (DAB radio) 43
Station preset (FM radio) 47
Status (Information, Setup menu) 81
Stereo mini jack 16
Stereo mini-plug cable 16
Stereo pin cable (RCA cable) 16
Stereo reception (FM radio) 46
APPENDIX Index En 111
STP network cable 27
STRAIGHT (sound mode) 39
Straight decode 39
Subnet Mask (Information, Setup menu) 81
Subnet Mask (IP Address, Setup menu) 81
Subwoofer (Speaker, Setup menu) 72
Subwoofer connection 15
Subwoofer Phase (Speaker, Setup menu) 73
Subwoofer Trim (Volume Trim, Option menu) 67
SUR.DECODE (sound mode) 40
Surround (Speaker, Setup menu) 72
Surround decoder 40
SW.Trim (Volume Trim, Option menu) 67
System ID (Network Update, Setup menu) 83
T
Test Tone (Speaker, Setup menu) 74
The Bottom Line (sound program) 38
The Roxy Theatre (sound program) 38
Tone Control (Option menu) 66
TONE CONTROL key 7
Treble (Tone Control, Option menu) 66
Tune Aid (DAB radio, Option menu) 45
TV Audio Input (HDMI, Setup menu) 75
TV connection 17
TV connection (ARC-compatible TV) 17
TV connection (HDMI Control-compatible TV) 19
TV connection (TV with HDMI input jacks) 20
TV connection (TV without HDMI input jacks) 21
TV FORMAT (ADVANCED SETUP menu) 84
TV operation (remote control) 86
TV operation key (remote control) 10
U
Unable to play (error indication) 97
UPDATE (ADVANCED SETUP menu) 85
USB jack 7
USB mass storage class device 54
USB storage device connection 54
USB storage device content playback 54
User Cancel (YPAO error message) 32
V
V IN (Signal Info, Option menu) 67
V OUT (Signal Info, Option menu) 67
VERSION (ADVANCED SETUP menu) 85
VIDEO AUX jack 7
Video device connection 22
VIDEO jack 16
Video Out (Option menu) 68
Video pin cable 16
Video signal flow 101
Video signal type setting 84
Video/audio input jack combination 24
Virtual CINEMA DSP 39
Virtual Presence Speaker (VPS) 6
Volume (Sound, Setup menu) 78
Volume Interlock (Option menu) 68
Volume Trim (Option menu) 67
VPS (Virtual Presence Speaker) 6
vTuner ID (Information, Setup menu) 81
Y
Yamaha Parametric room
Acoustic Optimizer (YPAO) 30
YPAO
(Yamaha Parametric room Acoustic Optimizer) 30
YPAO error message 32
YPAO MIC jack 7
YPAO microphone 30
YPAO warning message 33
© 2013 Yamaha Corporation YF215A0/EN

Documenttranscriptie

AV Receiver Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit. English CONTENTS Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 9 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 29 10 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . 30 FEATURES 5 Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PREPARATIONS 11 PLAYBACK 34 Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Selecting the input source and favorite settings with one touch (SCENE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Enjoying sound field effects (CINEMA DSP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 1 Placing speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Enjoying pure high fidelity sound (direct playback) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . . 41 2 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Enjoying surround sound with headphones (SILENT CINEMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 5.1-channel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Listening to DAB radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Preparing the DAB tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Selecting a DAB radio station for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 3 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Registering favorite DAB radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Displaying the DAB information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Checking reception strength of each DAB channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Connecting audio devices (such as CD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Listening to FM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Connecting to the jacks on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 5 Connecting the DAB/FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Registering favorite FM radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 6 Connecting to a network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Playing back iPod music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 7 Connecting recording devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 8 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Playback of iPod content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 En 2 Playing back music stored on a USB storage device . . . . . . . . . . . . . . . 54 Controlling external devices with the remote control . . . . . . . . . . . . . 86 Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Registering the remote control code for a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Registering the remote control codes for playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 57 Resetting remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Updating the unit’s firmware via the network . . . . . . . . . . . . . . . . . . . . 89 Playback of PC music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 APPENDIX 90 Playing back iTunes/iPod music via a network (AirPlay) . . . . . . . . . . . 62 Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Viewing the current status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Switching information on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Configuring playback settings for different playback sources Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 (Option menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 DAB radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 FM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 CONFIGURATIONS 69 Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . . 69 Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 USB and network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 HDMI and video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Yamaha technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 ECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Reference diagram (rear panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Configuring the system settings (ADVANCED SETUP menu) . . . . . . . . 84 ADVANCED SETUP menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Selecting the remote control ID (REMOTE ID) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Switching the video signal type (TV FORMAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Restoring the default settings (INIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Updating the firmware (UPDATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Checking the firmware version (VERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 En 3 Accessories Operating range of the remote control Check that the following accessories are supplied with the product. • Point the remote control at the remote control sensor on the unit and remain within the operating range shown below.  Remote control  Batteries (AAA, R03, UM-4) (x2) Within 6 m (20 ft) 30° 30° Insert the batteries the right way round.  DAB/FM antenna  YPAO microphone  Easy Setup Guide  Safety Brochure • Some features are not available in certain regions.  CD-ROM (Owner’s Manual) • Due to product improvements, specifications and appearance are subject to change without notice. • This manual explains operations using the supplied remote control. • This manual describes all the “iPod”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod”, “iPhone” and “iPad”, unless otherwise specified. • indicates precautions for use of the unit and its feature limitations. • indicates supplementary explanations for better use. Accessories En 4 FEATURES What you can do with the unit Wide variety of supported content • iPod/iPhone/iPad . p.50 • USB . p.54 • Media server (PC/NAS) . p.57 • Internet radio . p.60 • AirPlay . p.62 Supports 2- to 5.1-channel speaker system. Allows you to enjoy your favorite acoustic spaces in various styles. • Automatically optimizing the speaker . p.30 settings to suit your room (YPAO) • Reproducing stereo or multichannel sounds with the sound fields like actual movie theaters and concert halls (CINEMA DSP) . p.37 • Enjoying compressed music with . p.41 enhanced sound (Compressed Music Enhancer) Network contents Speakers Audio iPod/iPhone/iPad Audio HDMI Control USB device 3D and 4K signals supported Audio HDMI Control Audio/Video BD/DVD player Audio/Video TV AV receiver (the unit) Control Audio/Video (via HDMI or MHL) Smartphone/Tablet Change the input source and favorite settings with one touch (SCENE) . p.35 Sequential operation of a TV, AV receiver, and BD/DVD player (HDMI Control) TV remote control . p.101 FEATURES ➤ What you can do with the unit En 5 Full of useful functions! Useful tips ❑ Connecting various devices (p.22) ❑ Creating 3-dimensional sound fields (p.37) A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (such as BD/DVD players), audio devices (such as CD players), game consoles, camcorders, and other devices. The Virtual Presence Speaker (VPS) function allows you to create a 3-dimensional sound field in your own room (CINEMA DSP 3D). The combination of video/audio input jacks does not match an external device... Use “Audio In” in the “Option” menu to change the combination of video/audio input jacks so that it matches the output jack(s) of your external device (p.24). Video and audio are not synchronized... Use “Lipsync” in the “Setup” menu to adjust the delay between video and audio output (p.77). BD/DVD player I want to hear audio from the TV speakers... Use “Audio Output” in the “Setup” menu to select the output destination of signals input into the unit (p.75). Your TV speakers may be selected as an output destination. Set-top box Game console Camcorder I want to use the supplied remote control to operate external devices… TV Register the remote control codes of the external devices (such as a TV and BD/DVD players) (p.86). ❑ Playing back TV audio in surround sound with a single HDMI cable connection (Audio Return Channel: ARC) (p.17) When using an ARC -compatible TV, you only need one HDMI cable to enable video output to the TV, audio input from the TV, and the transmission of HDMI Control signals. HDMI Control TV audio Video from external device ❑ Listening to DAB radio (p.42) and FM radio (p.46) The unit is equipped with a built-in DAB/FM tuner. You can register up to 40 favorite radio stations each for DAB and FM as presets. ❑ Enjoying pure high fidelity sound (p.40) When the direct playback mode is enabled, the unit plays back the selected source with the least circuitry, which lets you to enjoy Hi-Fi sound quality. I want to change the on-screen menu language... Use “Language” in the “Setup” menu to select a language from English, Japanese, French, German, Spanish, Russian, Italian and Chinese (p.29). I want to update the firmware... Use “Network Update” (p.89) in the “Setup” menu or “UPDATE” (p.85) in the “ADVANCED SETUP” menu to update the unit’s firmware. Many other settings are available that let you to customize the unit. For details, see the following pages. ❑ Easy operation with a TV screen • SCENE settings (p.35) ❑ Easy operation and wireless music playback from iPhone or Android device You can operate the iPod or USB storage device, view information, or easily configure the settings using the on-screen menu. • Sound/video settings and signal information for each source (p.65) By using the application for smartphone/tablet “AV CONTROLLER”, you can control the unit from an iPhone, iPad, iPod touch or Android devices. Visit the Yamaha website for details. ❑ Low power consumption • System settings (p.84) • Various function settings (p.70) The ECO mode (power saving function) reduces the unit’s power consumption and helps to create an eco-friendly home theater system (p.79). FEATURES ➤ What you can do with the unit En 6 Part names and functions Front panel 1 2 3 4 5 6 7 8 9 : A YPAO MIC DIRECT INFO MEMORY PRESET FM DAB TUNING VOLUME SCENE BD DVD PHONES INPUT TV TONE CONTROL NET PROGRAM RADIO STRAIGHT SILENT CINEMA B 1 z (power) key Turns on/off (standby) the unit. 2 Standby indicator Lights up when the unit is in standby mode under any of the following conditions. • HDMI Control is enabled (p.75) • Standby Through is enabled (p.75) • Network Standby is enabled (p.82) • An iPod is being charged (p.50) 3 YPAO MIC jack For connecting the supplied YPAO microphone (p.30). 4 Remote control sensor Receives remote control signals (p.4). 5 INFO key Selects the information displayed on the front display (p.64). 6 MEMORY key Registers DAB radio stations (p.43) or FM radio stations (p.47) as preset stations. VIDEO AUX VIDEO AUDIO C D E F G H 5V 2.1A I 7 PRESET keys Select a preset DAB radio station (p.43) or a preset FM radio station (p.48). 8 DAB and FM keys Switch between DAB (p.42) and FM (p.46). 9 TUNING keys Select a DAB radio station (p.42) or an FM radio frequency (p.46) 0 Front display Displays information (p.8). A DIRECT key Enables/disables the direct playback mode (p.40). B PHONES jack For connecting headphones. C INPUT keys Select an input source. J D TONE CONTROL key Adjusts the high-frequency range and low-frequency range of output sounds (p.66). E SCENE keys Select the registered input source and sound program with one touch. Also, turns on the unit when it is in standby mode (p.35). F PROGRAM keys Select a sound program or a surround decoder (p.36). G STRAIGHT key Enables/disables the straight decode mode (p.39). H VIDEO AUX jacks For connecting devices, such as camcorders and game consoles (p.25). I USB jack For connecting a USB storage device (p.54) or an iPod (p.50). J VOLUME knob Adjusts the volume. FEATURES ➤ Part names and functions En 7 Front display (indicators) 1 2 3 4 5 ENHANCER ADAPTIVE DRC STEREO 3 TUNED OUT 6 7 SLEEP 8 VOL. MUTE L SL 9 1 HDMI Lights up when HDMI signals are being input or output. OUT Lights up when HDMI signals are being output. 2 CINEMA DSP Lights up when CINEMA DSP (p.37) is working. CINEMA DSP n Lights up when CINEMA DSP 3D (p.39) is working. 3 ENHANCER Lights up when Compressed Music Enhancer (p.41) is working. 4 ADAPTIVE DRC : 6 SLEEP Lights up when the sleep timer is on. 7 MUTE Blinks when audio is muted. 8 Volume indicator Indicates the current volume. 9 Cursor indicators 9 SW C R SR A A Speaker indicators Indicate speaker terminals from which signals are output. L Subwoofer A Front speaker (L) S Front speaker (R) D Center speaker F Surround speaker (L) G Surround speaker (R) Indicate the remote control cursor keys currently operational. 0 Information display Displays the current status (such as input name and sound mode name). You can switch the information by pressing INFO (p.64). Lights up when Adaptive DRC (p.66) is working. 5 STEREO Lights up when the unit is receiving a stereo FM radio signal. TUNED Lights up when the unit is receiving an FM radio station signal. FEATURES ➤ Part names and functions En 8 Rear panel 1 3 2 HDMI 1 HDMI OUT HDMI 2 HDMI 3 HDMI 4 HDMI 5 MHL 5V 1A (BD/DVD) 4 5 6 7 NETWORK (NET) ARC DC OUT 5V 0.5A ANTENNA (RADIO) COMPONENT VIDEO DAB/FM 75 PR PR PB PB Y COMPONENT VIDEO Y SPEAKERS FRONT VIDEO CENTER SURROUND MONITOR OUT OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 8 AV OUT AUDIO SUBWOOFER PRE OUT 9 : A B 1 HDMI OUT jack For connecting to an HDMI-compatible TV and outputting video/audio signals (p.17). When using ARC, TV audio signal can also be input through the HDMI OUT jack. 2 HDMI 1–4 jacks For connecting to HDMI-compatible playback devices and inputting video/audio signals (p.22). 3 HDMI 5/MHL jack For connecting to an HDMI- or MHL-compatible playback device and inputting video/audio signals (p.22). 4 ANTENNA jacks For connecting to the DAB/FM antenna (p.26). 5 NETWORK jack C 7 Power cable For connecting to an AC wall outlet (p.28). 8 AV 1–6 jacks For connecting to video/audio playback devices and inputting video/audio signals (p.22). 9 AV OUT jacks For outputting video/audio to a recording device (such as a VCR) (p.28). 0 AUDIO jacks * The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections. B MONITOR OUT jacks COMPONENT VIDEO jacks: For connecting to a TV that supports component video and outputting video signals (p.21). VIDEO jack: For connecting to a TV that supports composite video and outputting video signals (p.21). C SPEAKERS terminals For connecting to speakers (p.14). For connecting to an audio playback device and inputting audio signals (p.25). A SUBWOOFER PRE OUT jack For connecting to a subwoofer (with built-in amplifier) (p.14). For connecting to a network (p.27). 6 DC OUT jack For supplying power to a Yamaha AV accessory. For details on connections, refer to the instruction manual of the AV accessory. FEATURES ➤ Part names and functions En 9 Remote control 1 Remote control signal transmitter 1 Transmits infrared signals. CODE SET 2 SOURCE RECEIVER E 2 3 Changes the device (the unit or external device) that is operated with the remote control (p.87). You can operate the unit when this key lights up in orange, and an external device when this key lights up in green. 4 MHL 1 2 3 5 AV 4 5 6 V-AUX USB NET F TUNER 4 FM DAB 5 INFO MEMORY MOVIE MUSIC 7 8 9 : PRESET SUR. DECODE STRAIGHT ENHANCER TV NET RADIO G OPTION SETUP Turns on/off (standby) the unit. Select an input source for playback. HDMI 1–4 HDMI 1–4 jacks HDMI 5/MHL HDMI 5/MHL jack AV 1–6 AV 1–6 jacks V-AUX VIDEO AUX jack (on the front panel) USB USB jack (on the front panel) NET NETWORK jack (press repeatedly to select a desired network source) AUDIO AUDIO jacks 4 Radio keys VOLUME ENTER RETURN H DISPLAY POP-UP MENU MUTE MODE 1 C DIRECT SCENE TOP MENU A B TUNING SLEEP BD DVD RECEIVER z key 3 Input selection keys AUDIO 6 Turns on/off an external device. SOURCE/RECEIVER key HDMI 1 3 2 SOURCE z key 2 3 4 I Operate the DAB radio (p.42) or FM radio (p.46). FM Switches to FM radio. DAB Switches to DAB radio. MEMORY Registers DAB/FM radio stations as presets. PRESET Select a preset DAB/FM radio station. TUNING Select the DAB radio station or FM radio frequency. 5 INFO key Selects the information displayed on the front display (p.64). 5 6 7 9 0 10 8 6 Sound mode keys ENT Select a sound mode (p.36). 9 SETUP key Displays the setup menu (p.69). 0 Menu operation keys Cursor keys Select a menu or a parameter. ENTER Confirms a selected item. RETURN Returns to the previous screen. A MODE key Switches between “Stereo” and “Mono” for FM radio reception (p.46). Switches the iPod operation modes (p.52). B External device operation keys Let you play back and select menus and perform other operations for external devices (p.87). C Numeric keys Let you enter numerical values, such as FM radio frequencies. D TV operation keys Let you select TV input and volume, and perform other TV operations (p.86). E CODE SET button Registers remote control codes of external devices on the remote control (p.86). F ★/★★ keys Change the external device to be controlled without switching the input source (p.87). G OPTION key Displays the option menu (p.65). H VOLUME keys Adjust the volume. I MUTE key Mutes the audio output. TV D INPUT TV VOL MUTE TV CH 7 SLEEP key Switches the unit to standby mode automatically after a specified period of time has elapsed (sleep timer). Press repeatedly to set the time (120 min, 90 min, 60 min, 30 min, off). • To operate external devices with the remote control, register a remote control code for each device before using (p.86). 8 SCENE keys Select the registered input source and sound program with one touch. Also, turns on the unit when it is in standby mode (p.35). FEATURES ➤ Part names and functions En 10 PREPARATIONS General setup procedure 1 Placing speakers (p.12) Select the speaker layout for the number of speakers that you are using and place them in your room. 2 Connecting speakers (p.14) Connect the speakers to the unit. 3 Connecting a TV (p.17) Connect a TV to the unit. 4 Connecting playback devices (p.22) Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit. 5 Connecting the DAB/FM antenna (p.26) Connect the supplied DAB/FM antenna to the unit. 6 Connecting to a network (p.27) Connect the unit to a network. 7 Connecting recording devices (p.28) Connect recording devices to the unit. 8 Connecting the power cable (p.28) After all the connections are complete, plug in the power cable. 9 Selecting an on-screen menu language (p.29) Select the desired on-screen menu language (default: English). 10 Optimizing the speaker settings automatically (YPAO) (p.30) Optimize the speaker settings, such as volume balance and acoustic parameters, to suit your room (YPAO). This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit! PREPARATIONS ➤ General setup procedure En 11 1 Speaker placement 2 3 4 5 6 7 8 9 10 1 Placing speakers Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout examples. Caution • Use speakers with an impedance of at least 6 . Speaker system (the number of channels) Speaker type Front (L) Abbr. Function 1 Front (R) 2 Center 3 Surround (L) 4 Surround (R) 5 Subwoofer 9 Produce front right/left channel sounds (stereo sounds). Produces center channel sounds (such as movie dialogue and vocals). Produce surround right/left channel sounds. Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels. This channel is counted as “0.1”. 5.1 4.1 3.1 2.1 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● PREPARATIONS ● ● ➤ Placing speakers En 12 1 Speaker placement 2 3 4 5 6 7 8 9 10 5.1-channel system 3.1-channel system 1 9 2 1 3 9 4 2 3 5 10° to 30° 10° to 30° 4.1-channel system 2.1-channel system 1 2 1 9 2 9 4 5 10° to 30° 10° to 30° PREPARATIONS ➤ Placing speakers En 13 1 2 Speaker connections 3 4 5 6 7 8 9 10 2 Connecting speakers 5.1-channel system Connect the speakers placed in your room to the unit. The following diagrams provide connections for 5.1- system as examples. For other systems, connect speakers while referring to the connection diagram for the 5.1-channel system. Caution The unit (rear) • Remove the unit’s power cable from an AC wall outlet and turn off the subwoofer before connecting the speakers. SPEAKERS PB FRONT CENTER SURROUND Y • Ensure that the core wires of the speaker cable do not touch one another or come into contact with the unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit, “Check SP Wires” will appear on the front display when the unit is turned on. OR OUT SUBWOOFER PRE OUT Cables required for connection (commercially available) Speaker cables (x the number of speakers) + – + – Audio pin cable (x1: for connecting a subwoofer) 1 9 4 2 3 5 PREPARATIONS ➤ Connecting speakers En 14 1 2 Speaker connections 3 4 5 6 7 8 9 10 ■ Connecting speaker cables Speaker cables have two wires. One is for connecting the negative (-) terminal of the unit and the speaker, and the other is for the positive (+) terminal. If the wires are colored to prevent confusion, connect the black wire to the negative and the other wire to the positive terminal. a Remove approximately 10 mm (3/8”) of insulation from the ends of the speaker cable and twist the bare wires of the cable firmly together. b Loosen the speaker terminal. c Insert the bare wires of the cable into the gap on the side (upper right or bottom left) of the terminal. d Tighten the terminal. + (red) b c FR ON T d a - (black) Using a banana plug (Australia model only) a Tighten the speaker terminal. b Insert a banana plug into the end of the terminal. Banana plug a FR ON T b ■ Connecting the subwoofer (with built-in amplifier) Use an audio pin cable to connect the subwoofer. Y OR OU MONIT Audio pin cable AV6 T AV OUT AUDIO SUBW PRE OOFER OUT PREPARATIONS ➤ Connecting speakers En 15 Input/output jacks and cables ■ Video/audio jacks ■ Video jacks ■ Audio jacks ❑ HDMI jacks ❑ COMPONENT VIDEO jacks ❑ OPTICAL jacks Transmit digital video and digital sound through a single jack. Use an HDMI cable. Transmit video signals separated into three components: luminance (Y), chrominance blue (PB), and chrominance red (PR). Use a component video cable with three plugs. Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if available) before using the cable. HDMI cable Digital optical cable Component video cable OPTICAL ( TV ) AV 4 ❑ COAXIAL jacks • Use a 19-pin HDMI cable with the HDMI logo. We recommend using a cable less than 5.0 m (16.4 ft) long to prevent signal quality degradation. Transmit digital audio signals. Use a digital coaxial cable. Digital coaxial cable • The unit’s HDMI jacks support the HDMI Control, Audio Return Channel (ARC), and 3D and 4K video transmission (through output) features. ❑ VIDEO jacks • Use high speed HDMI cables to enjoy 3D or 4K videos. Transmit analog video signals. Use a video pin cable. ❑ HDMI/MHL jack Transmit digital video and digital sound. Use an MHL cable. HDMI 5 MHL 5V 1A Video pin cable ❑ AUDIO jacks (Stereo L/R jacks) Transmit analog stereo audio signals. Use a stereo pin cable (RCA cable). MHL cable • The HDMI 5/MHL jack of the unit supports both HDMI and MHL connections. Use a cable that matches the jack on your MHL-compatible mobile device. When connecting an HDMI-compatible playback device to the jack, use an HDMI cable. For details on an MHL connection, see “MHL connection” (p.22). Stereo pin cable (Stereo mini jack) Transmits analog stereo audio signals. Use a stereo mini-plug cable. Stereo mini-plug cable PREPARATIONS ➤ Input/output jacks and cables En 16 1 2 3 TV connection 4 5 6 7 8 9 10 3 Connecting a TV Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit. The connection method varies depending on the functions and video input jacks available on your TV. Refer to the instruction manual of the TV and choose a connection method. Does your TV support Audio Return Channel (ARC)? Yes ■ Connection Method 1 (p.17) About Audio Return Channel (ARC) Yes ■ Connection Method 2 (p.19) ■ Connection Method 1 (HDMI Control/ARC-compatible TV) Connect the TV to the unit with an HDMI cable. No Does your TV have an HDMI input jack? HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s power and volume with the TV’s remote control. You can also control playback devices (such as an HDMI Control-compatible BD/DVD player) connected to the unit with an HDMI cable. For details, see “HDMI Control” (p.101). ARC allows audio signals to travel both ways under HDMI Control. If you connect a TV that supports HDMI Control and ARC to the unit with a single HDMI cable, you can output video/audio to the TV or input TV audio to the unit. No Does your TV support HDMI Control? About HDMI Control Yes ■ Connection Method 3 (p.20) • The following explanation is based on the assumption that you have not changed the “HDMI” parameters (p.75) in the “Setup” menu. • Use an HDMI cable that supports ARC. No The unit (rear) HDMI OUT jack ■ Connection Method 4 (p.21) HDMI input (ARC-compatible) HDMI OUT HDMI 1 HDMI OUT HDMI 2 HDMI HDM (BD/DVD) ARC ARC HDMI ARC When connecting a video device with an analog video output HDMI ANTENN (RADIO) • If you will connect any video device to the AV 1–2 (COMPONENT VIDEO) jacks of the unit, you also need to connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks (p.21). • If you will connect any video device to the AV 3–6 (VIDEO) jacks or the VIDEO AUX (VIDEO) of the unit, you also need to connect the TV to the MONITOR OUT (VIDEO) jack (p.21). When using a set-top box to watch TV DAB/FM 75 PR PB Y COMPONENT VIDEO VIDEO OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 TV • Connect the set-top box to the unit in the same way as playback devices (p.22). If you will receive TV broadcasts only from the set-top box, you do not need to make an audio cable connection between the TV and the unit or configure the ARC setting. • By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and network sources, or configure the settings of the unit with the menu displayed on the TV. PREPARATIONS ➤ Connecting a TV En 17 1 2 3 TV connection 4 5 6 7 8 9 10 ❑ Necessary settings To use HDMI Control and ARC, you need to configure the following settings. 3 Configure the settings for HDMI Control. For details on settings and operating your TV, refer to the instruction manual for the TV. a Enable HDMI Control on the TV and playback devices (such as HDMI Control-compatible BD/DVD player). 1 After connecting external devices (such as a TV and playback devices) and the power cable to the unit, turn on the unit, TV, and playback devices. b Turn off the TV’s main power and then turn off the unit and playback devices. 2 Configure the settings of the unit. c Turn on the unit and playback devices and then turn on the TV’s main power. d Switch the TV input to display video from the unit. a Check that ARC is enabled on the TV. b Switch the TV input to display video from the unit. c Press SETUP. VOLUME ENTER RETURN DISPLAY TOP On the unit: The input to which the playback device is connected is selected. If not, select the input source manually. On the TV: The video from the playback device is displayed. OPTION SETUP e Check the following. SETUP Cursor keys ENTER POP UP d Use the cursor keys to select “HDMI” and press ENTER. f Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control. This completes the necessary settings. If you select a TV program with the TV remote control, the input source of the unit will be automatically switched to “AV 4” and the TV audio will be played back on the unit. If you cannot hear the TV’s audio, check that “ARC” (p.76) in the “Setup” menu is set to “On”. Setup Speaker Configuration HDMI • If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again) the devices. It may solve the problem. Sound ECO Function • If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on the TV. Network Language • If the audio is interrupted while using ARC, set “ARC” (p.76) in the “Setup” menu to “Off” and use a digital optical cable to input TV audio to the unit (p.19). e Press ENTER again. f Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys (e/r) to select “On” as shown below. • “AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks, use “TV Audio Input” (p.75) in the “Setup” menu to change the TV audio input assignment. To use the SCENE function (p.35), you also need to change the input assignment for SCENE(TV). Configuration HDMI Control On Audio Output Auto Standby Through Auto TV Audio Input AV4 Standby Sync Auto ARC On SCENE Back: RETURN g Press SETUP. PREPARATIONS ➤ Connecting a TV En 18 1 2 3 TV connection 4 5 6 7 8 9 10 ■ Connection Method 2 (HDMI Control-compatible TV) ❑ Necessary settings Connect the TV to the unit with an HDMI cable and a digital optical cable. To use HDMI Control, you need to configure the following settings. For details on settings and operating your TV, refer to the instruction manual for the TV. • The following explanation is based on the assumption that you have not changed the “HDMI” parameters (p.75) in the “Setup” menu. The unit (rear) 1 After connecting external devices (such as a TV and playback devices) and power cable of the unit, turn on the unit, TV, and playback devices. 2 Configure the settings of the unit. HDMI OUT jack HDMI input HDMI OUT HDMI 1 HDMI OUT HDMI 2 HDMI 3 HDMI (BD/DVD) ARC ARC HDMI a Switch the TV input to display video from the unit. HDMI ANTENNA (RADIO) DAB/FM 75 PR b Press SETUP. PB Y COMPONENT VIDEO OPTION SETUP VIDEO OPTICAL OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 OPTICAL ( TV ) AV 5 AV 6 O O VOLUME ENTER A (TV) O AV 4 AV 4 (OPTICAL) jack Audio output (digital optical) TV RETURN DISPLAY TOP SETUP Cursor keys ENTER POP UP c Use the cursor keys to select “HDMI” and press ENTER. • By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and network sources, or configure the settings of the unit with the menu displayed on the TV. Setup Speaker Configuration HDMI Sound ECO Function Network Language d Press ENTER again. e Use the cursor keys (q/w) to select “HDMI Control” and the cursor keys (e/r) to select “On” as shown below. Configuration HDMI Control On Audio Output Auto Standby Through Auto TV Audio Input AV4 Standby Sync Auto ARC On SCENE Back: RETURN f Press SETUP. PREPARATIONS ➤ Connecting a TV En 19 1 2 3 TV connection 4 5 6 7 8 9 10 3 Configure the settings for HDMI Control. a Enable HDMI Control on the TV and playback devices (such as a HDMI Control-compatible BD/DVD player). ■ Connection Method 3 (TV with HDMI input jacks) Connect the TV to the unit with an HDMI cable and a digital optical cable. The unit (rear) HDMI OUT jack HDMI input b Turn off the TV’s main power and then turn off the unit and playback devices. c Turn on the unit and playback devices and then turn on the TV. HDMI OUT HDMI 1 HDMI OUT HDMI 2 HDMI 3 ARC HDMI d Switch the TV input to display video from the unit. On the unit: The input to which the playback device is connected is selected. If not, select the input source manually. On the TV: The video from the playback device is displayed. f Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control. This completes the necessary settings. If you select a TV program with the TV remote control, the input source of the unit will be automatically switched to “AV 4” and the TV audio will be played back on the unit. • If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again) the devices. It may solve the problem. • If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on the TV. HDMI ANTENNA (RADIO) DAB/FM 75 PR e Check the following. HDMI (BD/DVD) ARC PB Y COMPONENT VIDEO VIDEO OPTICAL OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 OPTICAL ( TV ) AV 5 AV 6 O O A (TV) O AV 4 AV 4 (OPTICAL) jack Audio output (digital optical) TV If you switch the input source of the unit to “AV 4” using the AV 4 or SCENE(TV) keys, the TV audio will be played back on the unit. • By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and network sources, or configure the settings of the unit with the menu displayed on the TV. • If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other than OPTICAL) for connecting the TV, connect the TV to one of the AV 1–6 and AUDIO jacks. To use the SCENE function (p.35), you also need to change the input assignment for SCENE(TV). • “AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other than OPTICAL) for connecting the TV, use “TV Audio Input” (p.75) in the “Setup” menu to change the TV audio input assignment. To use the SCENE function (p.35), you also need to change the input assignment for SCENE(TV). PREPARATIONS ➤ Connecting a TV En 20 1 2 3 TV connection 4 5 6 7 8 9 10 ■ Connection Method 4 (TV without HDMI input jacks) ❑ VIDEO (composite video) connection (with a video pin cable) When connecting any video device to the AV 1–2 (COMPONENT VIDEO) jacks of the unit, connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks. The unit (rear) When connecting any video device to the AV 3–6 (VIDEO) jacks or the VIDEO AUX (VIDEO) jack of the unit, connect the TV to the MONITOR OUT (VIDEO) jack. HDMI 1 HDMI OUT If you select “AV 4” as the input source by pressing AV 4 or SCENE(TV), the TV audio will be played back on the unit. MONITOR OUT (VIDEO) jack HDMI 2 HDMI 3 HDMI 4 VIDEO V V ANTENNA (RADIO) COMPONENT VIDEO MONITOR OUT DAB/FM 75 PR • Operations with TV screen are available only when your TV is connected to the unit via HDMI. HDMI 5 MHL 5V (BD/DVD) ARC PR PB • If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be output to the TV. Video input (composite video) PB Y COMPONENT VIDEO Y VIDEO MONITOR OUT OPTICAL OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 AV OUT OPTICAL AUDIO SUBWOOFER PRE OUT O O (TV) AV 4 • If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other than OPTICAL) for connecting the TV, connect the TV to one of the AV 1–6 and AUDIO jacks. To use the SCENE function (p.35), you also need to change the input assignment for SCENE(TV). AV 4 (OPTICAL) jack TV Audio output (digital optical) ❑ COMPONENT VIDEO connection (with a component video cable) Video input (component video) MONITOR OUT (COMPONENT VIDEO) jacks COMPONENT VIDEO PR COMPONENT VIDEO The unit (rear) PR HDMI 1 UT HDMI 2 HDMI 3 HDMI 4 HDMI MHL 5V (BD/DVD) 5 1A PR PR PB PB Y Y PB PB Y ANTENNA (RADIO) COMPONENT VIDEO DAB/FM 75 Y MONITOR OUT PR PB Y VIDEO MONITOR OUT OPTICAL COAXIAL COAXIAL OPTICAL AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 AV OUT OPTICAL AUDIO SUBWOOFER PRE OUT O O (TV) AV 4 AV 4 (OPTICAL) jack TV Audio output (digital optical) PREPARATIONS ➤ Connecting a TV En 21 1 2 3 4 Playback device connections 5 6 7 8 9 10 4 Connecting playback devices The unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect an iPod or a USB storage device, see the following pages. – Connecting an iPod (p.50) – Connecting a USB storage device (p.54) Connecting video devices (such as BD/DVD players) ❑ MHL connection Connect an MHL-compatible mobile device (such as smartphones) to the unit with an MHL cable. You can enjoy full HD videos and multichannel audio sources stored on the mobile device. The HDMI 5/MHL jack of the unit enables you to input videos and audio directly from the mobile device to the unit. HDMI 5/MHL jack The unit (rear) HDMI 5 MHL 5V 1A Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the unit. Depending on the video/audio output jacks available on your video device, choose one of the following connections. We recommend using an HDMI connection if the video device has an HDMI output jack. HDMI 1 HDMI OUT HDMI 2 HDMI 3 HDMI 4 HDMI 5 MHL 5V 1A (BD/DVD) ARC ANTENNA (RADIO) COMPONENT VIDEO DAB/FM 75 PR PR MHL PB Y COMPONENT VIDEO Y VIDEO MONITOR OUT • If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device (p.24). MHL OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 Connect a video device to the unit with an HDMI cable. HDMI 1 HDMI 2 HDMI 3 HDMI 4 (BD/DVD) HDMI 5 MHL 5V 1A The unit (rear) • To watch videos input to the HDMI 5/MHL jack, you need to connect your TV to the HDMI OUT jack of the unit (p.17 to 20). HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI MHL 5V (BD/DVD) • You need to prepare an MHL cable that match the jack on your mobile device. 5 1A HDMI output HDMI ARC ANTENNA (RADIO) HDMI COMPONENT VIDEO DAB/FM 75 PR PB AV 1 • You can operate the mobile device using the menu operation keys, external device operation keys and numeric keys on the remote control. However, some features may not be compatible, depending on the mobile device or its application. In this case, operate the mobile device itself. PR PB OPTICAL HDMI Y VIDEO COAXIAL AV 2 AUDIO SUBWOOFER PRE OUT If you select the input source by pressing HDMI 5, the video/audio played back on the mobile device will be output from the unit. HDMI 1–5 jacks Y COMPONENT VIDEO AV 6 AV OUT Mobile device ■ HDMI connection HDMI OUT MHL output PB COAXIAL MONITOR OUT OPTICAL ( TV ) AV 3 AV 4 AV 5 AV 6 AV OUT AUDIO • If “Standby Through” (p.75) in the “Setup” menu is set to “On”, you can output mobile device videos/audio to the TV or operate the mobile device using the remote control of the unit even when the unit is in standby mode. SUBWOOFER PRE OUT Video device • The unit supplies power to the mobile device in the following conditions. – The unit is turned on. If you select the input source by pressing HDMI 1–5, the video/audio played back on the video device will be output from the unit. – The unit is in standby mode while “Standby Through” (p.75) in the “Setup” menu is set to “On”. • To watch videos input to the HDMI 1–5 jacks, you need to connect your TV to the HDMI OUT jack of the unit (p.17 to 20). PREPARATIONS ➤ Connecting playback devices En 22 1 2 3 4 Playback device connections 5 6 7 8 9 10 ■ Component video connection ■ Composite video connection Connect a video device to the unit with a component video cable and an audio cable (digital optical or digital coaxial). Choose a set of input jacks (on the unit) depending on the audio output jacks available on your video device. Connect a video device to the unit with a video pin cable and an audio cable (digital coaxial, digital optical, or stereo pin cable). Choose a set of input jacks (on the unit) depending on the audio output jacks available on your video device. Output jacks on video device Output jacks on video device Input jacks on the unit Video Input jacks on the unit Audio Video Digital optical AV 1 (COMPONENT VIDEO + OPTICAL) Digital coaxial AV 2 (COMPONENT VIDEO + COAXIAL) Audio Digital coaxial AV 3 (VIDEO + COAXIAL) Digital optical AV 4 (VIDEO + OPTICAL) Analog stereo AV 5–6 (VIDEO + AUDIO) Component video Composite video Video output (component video) AV 1–2 (COMPONENT VIDEO) jacks Video output (composite video) COMPONENT VIDEO The unit (rear) AV 3–6 (VIDEO) jack PR VIDEO PR HDMI 1 HDMI OUT HDMI 2 (BD/DVD) PB ARC PR PR PB PB Y Y V PB HDMI 1 HDMI OUT HDMI 2 V Y VIDEO ANTENNA (RADIO) DAB/FM 75 D PR Y COMPONENT VIDEO PR PB Y COMPONENT VIDEO HDMI 3 (BD/DVD) ARC PB Video device Y COMPONENT VIDEO VIDEO O VIDEO C O OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) OPTICAL AV 5 AV 1 Video device COAXIAL AV 2 C OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 COAXIAL AV OUT O C O OPTICAL COAXIAL AV 1 (OPTICAL) jack or AV 2 (COAXIAL) jack C COAXIAL OPTICAL OPTICAL L Audio output (digital optical or digital coaxial) If you select the input source by pressing AV 1–2, the video/audio played back on the video device will be output from the unit. • To watch videos input to the AV 1–2 (COMPONENT VIDEO) jacks, you need to connect your TV to the MONITOR OUT (COMPONENT VIDEO) jacks of the unit (p.21). The unit (rear) L L L R R R R Audio output Any of AV 3 (COAXIAL) jack, (either digital optical, AV 4 (OPTICAL) jack, digital coaxial, or analog stereo) AV 5–6 (AUDIO) jacks If you select the input source by pressing AV 3–6, the video/audio played back on the video device will be output from the unit. • To watch videos input to the AV 3–6 (VIDEO) jacks, you need to connect your TV to the MONITOR OUT (VIDEO) jack of the unit (p.21). PREPARATIONS ➤ Connecting playback devices En 23 1 2 3 4 Playback device connections 5 6 7 8 9 10 ■ Changing the combination of video/audio input jacks If the combination of video/audio input jacks available on the unit does not match your video device, change its combination according to the output jacks of your device. You can connect a video device that has the following video/audio output jacks. Output jacks on video device Video Video Digital optical Component video After connecting external devices (such as a TV and playback devices) and power cable of the unit, turn on the unit. 2 Press AV 2 to select “AV 2” (video input jack to be used) as the input source. Input jacks on the unit Audio HDMI 1 Audio HDMI AV 1 (OPTICAL) AV 4 (OPTICAL) HDMI 1–5 Digital coaxial HDMI 1–5 AV 2–3 (COAXIAL) Analog stereo HDMI 1–5 AV 5–6 (AUDIO) AUDIO Analog stereo AV 1–2 (COMPONENT VIDEO) AV 5–6 (AUDIO) AUDIO 1 2 3 1 2 3 5 BD DVD TV RETURN PR PR HDMI 1 HDMI 2 PB HDMI 3 (BD/DVD) PR Y ARC NET RADIO OPTION VOLUME DISPLAY Cursor keys ENTER POP UP Press OPTION. Use the cursor keys (q/w) to select “Audio In” and press ENTER. VOL. AudioIn COMPONENT VIDEO The unit (rear) HDMI OUT 3 4 Video output (component video) AV 2 (COMPONENT VIDEO) jacks AV 2 6 OPTION SETUP TOP For example, if you have connected a video device to AV 2 (COMPONENT VIDEO) and AV 5 (AUDIO) jacks of the unit, change the combination setting as follows. 5 AV 4 ENTER ❑ Necessary setting 4 MHL 5 PB Use the cursor keys (e/r) to select “AV 5” (audio input jack to be used). PB ANTENNA Y (RADIO) DAB/FM 75 PR VOL. Y AudioAV5 PB Y COMPONENT VIDEO L VIDEO AUDIO L COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 L L R OPTICAL AV OUT R R R AV 5 AV 5 (AUDIO) jacks Audio output (analog stereo) Video device 6 Press OPTION. This completes the necessary settings. If you select “AV 2” as the input source by pressing AV 2, the video/audio played back on the video device will be output from the unit. PREPARATIONS ➤ Connecting playback devices En 24 1 2 3 4 Playback device connections 5 6 7 8 9 10 Connecting audio devices (such as CD players) Connecting to the jacks on the front panel Connect audio devices such as CD players and MD players to the unit. Depending on the audio output jacks available on your audio device, choose one of the following connections. Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as camcorders and portable audio players to the unit. Audio output jacks on audio device Audio output jacks on the unit Digital optical AV 1 (OPTICAL) AV 4 (OPTICAL) Digital coaxial AV 2–3 (COAXIAL) Analog stereo AV 5–6 (AUDIO) AUDIO Before making a connection, stop playback on the device and turn down the volume on the unit. SCENE BD DVD INPUT TONE CONTROL TV NET PROGRAM RADIO STRAIGHT VIDEO AUX AUDIO The unit (front) VIDEO 5V 2.1A V The unit (rear) HDMI 1 HDMI OUT HDMI 2 HDMI 3 HDMI 4 (BD/DVD) ARC O O ANTENNA (RADIO) COMPONENT VIDEO DAB/FM 75 PR PR PB OPTICAL OPTICAL C PB Y COMPONENT VIDEO Portable audio player COAXIAL Y VIDEO C COAXIAL MONITOR O L OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 AV OUT AUDIO SUB PR L L L R R R AV 1–6 jacks AUDIO jacks Audio device R Audio output (either digital optical, digital coaxial, or analog stereo) If you select the input source by pressing AV 1–6 or AUDIO, the audio played back on the audio device will be output from the unit. Camcorder If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played back on the device will be output from the unit. • To watch videos input to the VIDEO AUX (VIDEO) jack, you need to connect your TV to the MONITOR OUT (VIDEO) jack of the unit (p.21). • You need to prepare the video/audio cables that match the output jacks on your device. • For details on how to connect an iPod or a USB storage device, see “Connecting an iPod” (p.50) or “Connecting a USB storage device” (p.54). • When “USB” is selected as the input source, video signals input to the VIDEO AUX (VIDEO) jack are output from the MONITOR OUT (VIDEO) jack. PREPARATIONS ➤ Connecting playback devices En 25 1 2 3 4 5 DAB/FM antenna connection 6 7 8 9 10 5 Connecting the DAB/FM antenna Connect the supplied DAB/FM antenna to the unit and fix the antenna ends to a wall. DAB/FM antenna The unit (rear) HDMI 1 HDMI OUT HDMI 2 HDMI 3 HDMI 4 HDMI MHL 5V (BD/DVD) 5 1A NETWORK (NET) ARC DC OUT 5V 0.5A ANTENNA (RADIO) COMPONENT VIDEO DAB/FM 75 PR PR PB PB Y COMPONENT VIDEO Y SPEAKERS FRONT VIDEO CENTER SURROUND MONITOR OUT OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 AV OUT AUDIO SUBWOOFER PRE OUT • The antenna should be stretched out horizontally. • If you cannot obtain good reception on the radio, adjust the height, direction or placement of the DAB/FM antenna. PREPARATIONS ➤ Connecting the DAB/FM antenna En 26 1 2 3 4 5 6 Network connections 7 8 9 10 6 Connecting to a network Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable). You can enjoy Internet radio or music files stored on media servers, such as PCs and Network Attached Storage (NAS), on the unit. • Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the unit to the network devices or the Internet. In these cases, configure the security software or firewall settings appropriately. • Each server must be connected to the same subnet as the unit. Network Attached Storage (NAS) Internet • To use the service via the Internet, broadband connection is strongly recommended. WAN PC LAN Modem Router Network cable HDMI 1 HDMI OUT HDMI 2 HDMI 3 HDMI 4 HDMI MHL 5V (BD/DVD) 5 1A NETWORK (NET) ARC DC OUT 5V 0.5A ANTENNA (RADIO) COMPONENT VIDEO DAB/FM 75 PR PR PB PB FRONT Y COMPONENT VIDEO Y VIDEO MONITOR OUT OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 AV OUT AUDIO SUBWOOFER PRE OUT The unit (rear) • If you are using a router that supports DHCP, you do not need to configure any network settings for the unit, as the network parameters (such as the IP address) will be assigned automatically to it. You only need to configure the network settings if your router does not support DHCP or if you want to configure the network parameters manually (p.81). • You can check whether the network parameters (such as IP address) are properly assigned to the unit in “Information” (p.81) in the “Setup” menu. PREPARATIONS ➤ Connecting to a network En 27 1 2 3 4 5 6 7 Recording device connections 8 Power cable connection 9 10 7 Connecting recording devices You can connect video/audio recording devices to the AV OUT jacks. These jacks output analog video/audio signals selected as the input. 8 Connecting the power cable After all the connections are complete, plug in the power cable. The unit (rear) • To copy video/audio from a video device, connect the video device to the AV 5–6 jacks or VIDEO AUX (VIDEO/AUDIO) jacks of the unit. • To copy audio from an audio device, connect the audio device to the AV 5–6 jacks, AUDIO jacks, or VIDEO AUX (AUDIO) jacks of the unit. To an AC wall outlet NETWORK (NET) DC OUT 5V 0.5A • Be sure to use the AV OUT jacks only for connecting recording devices. SPEAKERS FRONT CENTER SURROUND Video/audio input AV OUT jacks VIDEO The unit (rear) V HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI MHL 5V (BD/DVD) V L 5 1A L L R R R ANTENNA (RADIO) COMPONENT VIDEO DAB/FM 75 PR PB AV OUT Video recording device AUDIO Y VIDEO MONITOR OUT COAXIAL COAXIAL OPTICAL AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 AV OUT AUDIO SUBWOOFER PRE OUT PREPARATIONS ➤ Connecting recording devices En 28 1 2 3 4 5 6 7 8 9 Language setting 10 9 Selecting an on-screen menu language CODE SET SOURCE RECEIVER RECEIVER z Select the desired on-screen menu language from English (default), Japanese, French, German, Spanish, Russian, Italian and Chinese. HDMI 1 2 3 4 MHL 1 2 3 5 AV 4 5 6 V-AUX USB NET 1 2 AUDIO TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET TUNING Press RECEIVER z to turn on the unit. 6 To exit from the menu, press SETUP. • The information on the front display is provided in English only. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). SUR. DECODE STRAIGHT ENHANCER DIRECT SLEEP • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. SCENE BD DVD TV NET RADIO SETUP OPTION SETUP VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU Cursor keys ENTER 3 4 MUTE Press SETUP. Use the cursor keys to select “Language” and press ENTER. MODE 1 2 3 4 5 6 7 8 9 0 10 Setup Speaker English HDMI 日本語 Français Deutsch Español Русский Italiano Sound ENT ECO TV Function INPUT TV VOL TV CH Network MUTE Language 5 中文 Use the cursor keys to select the desired language. Setup Speaker English HDMI 日本語 Français Deutsch Español Русский Sound ECO Function Network Language Italiano 中文 PREPARATIONS ➤ Selecting an on-screen menu language En 29 1 2 3 4 5 6 7 8 9 10 Automatic speaker setup 10 Optimizing the speaker settings automatically (YPAO) CODE SET SOURCE RECEIVER RECEIVER z HDMI 1 2 3 4 MHL 1 2 3 5 AV 4 5 6 V-AUX USB NET The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room. 4 Place the YPAO microphone at your listening position (same height as your ears) and connect it to the YPAO MIC jack on the front panel. The unit (front) AUDIO TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET TUNING SUR. DECODE STRAIGHT ENHANCER DIRECT SLEEP SCENE BD DVD TV NET – Use YPAO after connecting a TV and speakers to the unit. – During the measuring process, test tones are output at high volume. Ensure that the test tones do not frighten small children. Also, refrain from using this function at night when it may be a nuisance to others. 1 RADIO – During the measuring process, you cannot adjust the volume. OPTION SETUP • Please note the following when using YPAO. 2 – During the measuring process, keep the room as quiet as possible. VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU MUTE MODE 1 2 3 5 6 7 9 0 10 – Do not connect headphones. 1 2 Press RECEIVER z to turn on the unit. Turn on the TV and switch the TV input to display video from the unit (HDMI OUT jack). YPAO microphone Listening 5 position 4 8 ENT Ear height • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. TV MUTE 3 4 INPUT TV VOL 9 TV CH 3 Turn on the subwoofer and set the volume to half. If the crossover frequency is adjustable, set it to maximum. VOLUME MIN MAX CROSSOVER/ HIGH CUT MIN 9 Place the YPAO microphone at your listening position (same height as your ears). We recommend the use of a tripod as a microphone stand. You can use the tripod screws to stabilize the microphone. The following screen appears on the TV. MAX Auto Setup Start Exit PREPARATIONS ➤ Press SETUP key to Start Optimizing the speaker settings automatically (YPAO) En 30 1 2 3 4 5 6 7 8 9 10 Automatic speaker setup CODE SET SOURCE RECEIVER • To cancel the operation, disconnect the YPAO microphone, or use the cursor keys to select “Exit” and press ENTER, before starting the measurement. SOURCE/RECEIVER HDMI 1 2 3 1 2 3 4 • A speaker with a problem is indicated by blinking of the speaker indicators in the front display. • If multiple warnings are given (when operating with the front display), use the cursor keys (q/w) to check the other warning messages. MHL 5 AV 4 5 6 V-AUX USB NET • Do not stand between the speakers and the YPAO microphone during the measurement process (about 3 minutes). 6 • Move to the corner of the room or leave the room. AUDIO To save the measurement results, use the cursor keys (e/r) to select “SAVE” and press ENTER. TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET 5 TUNING SUR. DECODE STRAIGHT ENHANCER SCENE TV NET DISPLAY TOP MENU POP-UP MENU MUTE MODE 1 2 3 5 6 7 9 0 10 4 Cursor keys ENTER RETURN MUTE TV CH Result 3 / 2 / 0.1 ch 3.0 / 10.5 m • To stop the measurement temporarily, press RETURN and follow the procedure in “Error messages” (p.32). • If cursor keys do not work, the remote control may be set to the external device operation mode. In this case, press SOURCE/RECEIVER to set the remote control to the unit operation mode (the key lights up in orange) and then use the cursor keys. The adjusted speaker settings are applied. The following screen appears on the TV when the measurement finishes. • To finish the measurement without saving the result, select “CANCEL”. 8 7 Disconnect the YPAO microphone from the unit. ENT Auto Setup TV SAVE -3.0 / +10.0 dB INPUT TV VOL Exit SETUP VOLUME ENTER RETURN Measurement Finished Start RADIO OPTION SETUP Auto Setup The measurement will start in 10 seconds. Press ENTER to start the measurement immediately. DIRECT SLEEP BD DVD To start the measurement, use the cursor keys to select “Start” and press SETUP. Start Exit Measurement Finished Result 3 / 2 / 0.1 ch 3.0 / 10.5 m -3.0 / +10.0 dB OK:ENTER This completes optimization of the speaker settings. 1 Caution 2 • The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be exposed to direct sunlight or high temperatures (such as on top of AV equipment). 3 4 1 The number of speakers (front side/rear side/subwoofer) 2 Speaker distance (nearest/farthest) 3 Adjustment range of speaker output level 4 Warning message (if available) • If any error message (such as E-1) or warning message (such as W-1) appears, see “Error messages” (p.32) or “Warning messages” (p.33). PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO) En 31 1 2 3 4 5 6 7 8 9 10 Automatic speaker setup Error messages If any error message is displayed during the measurement, resolve the problem and perform YPAO again. Auto Setup Start ERROR E-5:Noisy Error message Exit PROCEED 5% TV screen VOL. E-5:NOISY L SL SW C R SR Front display ■ Procedure to handle errors 1 Check the content of error message and press ENTER. 2 Use the cursor keys (e/r) to select the desired operation. Error message Cause Remedy E-1:No Front SP (E-1:NO FRNT SP) Front speakers are not detected. E-2:No Sur. SP (E-2:NO SUR SP) One of the surround speakers cannot be detected. E-5:Noisy (E-5:NOISY) The noise is too loud. Keep the room quiet and retry YPAO. If you select “PROCEED”, YPAO takes the measurement again and ignores any noise detected. E-7:No MIC (E-7:NO MIC) The YPAO microphone has been removed. Connect the YPAO microphone to the YPAO MIC jack firmly and retry YPAO. E-8:No Signal (E-8:NO SIGNAL) The YPAO microphone cannot detect test tones. Connect the YPAO microphone to the YPAO MIC jack firmly and retry YPAO. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service center. E-9:User Cancel (E-9:CANCEL) The measurement has been canceled. Retry or exit YPAO as necessary. E-10:Internal Err. (E-10:INTERNAL) An internal error has occurred. Exit YPAO, and turn off and on the unit. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service center. Exit YPAO, turn off the unit, and then check the speaker connections. • Texts in parentheses denote indicators on the front display. To exit the YPAO measurement: a Select “EXIT” and press ENTER. b Use the cursor keys (q/w) to select “Exit” and press ENTER. c Disconnect the YPAO microphone from the unit. To retry the YPAO measurement from beginning: Select “RETRY” and press ENTER. To proceed with the current YPAO measurement (for E-5 and E-9 only): Select “PROCEED” and press ENTER. PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO) En 32 1 2 3 4 5 6 7 8 9 10 Automatic speaker setup Warning messages If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings. Auto Setup Warning message Cause W-1:Out of Phase (W-1:PHASE) Check the cable connections (+/-) of the problem speaker. If the speaker is connected incorrectly, exit YPAO, turn off the A speaker cable may be connected with the unit, and then reconnect the speaker cable. reverse polarity (+/-). Depending on the type of speakers or room environment, this message may appear even if the speakers are connected correctly. In this case, you can ignore the message. W-2:Over Distance (W-2:DISTANCE) A speaker is placed more than 24 m (80 ft) from the listening position. Exit YPAO, turn off the unit, and place the problem speaker within 24 m (80 ft) of the listening position. There are significant volume differences between the speakers. Check the usage environment and cable connections (+/-) of each speaker, and the volume of the subwoofer. If there is any problem, exit YPAO, turn off the unit, and then reconnect speaker cable or correct the speaker positions. We recommend using the same speakers or speakers with specifications that are as similar as possible. Measurement Finished Start Result Exit 3 / 2 / 0.1 ch 3.0 / 10.5 m -3.0 / +10.0 dB OK:ENTER Warning message W-1:Out of Phase Remedy TV screen Problem speaker (blinks) W-3:Level Error (W-3:LEVEL) VOL. W-1:PHASE L SL SW C R SR Front display • Texts in parentheses denote indicators on the front display. ■ Procedure to handle warnings 1 Check the content of warning message and press ENTER. 2 Use the cursor keys (e/r) to select the desired operation. To save the measurement results: Select “SAVE” and press ENTER. To discard the measurement result: Select “CANCEL” and press ENTER. 3 Disconnect the YPAO microphone from the unit. PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO) En 33 PLAYBACK CODE SET SOURCE RECEIVER HDMI 1 2 3 1 2 3 4 MHL Input selection keys 5 Basic playback procedure AV 4 5 6 V-AUX USB NET 1 Turn on the external devices (such as a TV or BD/DVD player) connected to the unit. 2 Use the input selection keys to select an input source. 3 Start playback on the external device or select a radio station. AUDIO TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET TUNING SUR. DECODE STRAIGHT ENHANCER DIRECT SLEEP SCENE BD DVD TV NET RADIO OPTION SETUP Refer to the instruction manual for the external device. VOLUME ENTER RETURN VOLUME For details on the following operations, see the corresponding pages. MUTE • Listening to DAB radio (p.42) DISPLAY TOP MENU POP-UP MENU MUTE MODE • Listening to FM radio (p.46) 1 2 3 4 5 6 7 8 9 0 10 • Playing back iPod music (p.50) • Playing back music stored on a USB storage device (p.54) ENT TV • Playing back music stored on media servers (PCs/NAS) (p.57) INPUT TV VOL TV CH MUTE • Listening to Internet radio (p.60) • Playing back iTunes/iPod music via a network (AirPlay) (p.62) 4 Press VOLUME to adjust the volume. • To mute the audio output, press MUTE. Press MUTE again to unmute. • To adjust the treble/bass settings, use the “Option” menu or TONE CONTROL on the front panel (p.66). PLAYBACK ➤ Basic playback procedure En 34 Selecting the input source and favorite settings with one touch (SCENE) CODE SET SOURCE RECEIVER SOURCE/RECEIVER HDMI 1 2 3 4 MHL 1 2 3 Input selection keys 5 AV 4 5 6 V-AUX USB NET The SCENE function allows you to select the assigned input source, sound program, and Compressed Music Enhancer on/off with just one touch. 1 AUDIO DAB PRESET INFO MEMORY MOVIE MUSIC TUNING By default, the following settings are registered for each scene. DIRECT SLEEP SCENE TV NET RADIO VOLUME ENTER RETURN Sound program BD/DVD HDMI 1 MOVIE (Sci-Fi) Off On TV AV 4 STRAIGHT On On NET NET RADIO MUSIC (5ch Stereo) On Off RADIO TUNER (FM) MUSIC (5ch Stereo) On Off DISPLAY TOP MENU POP-UP MENU MUTE MODE 1 2 3 4 5 6 7 8 9 0 10 Compressed SCENE link Music playback Enhancer Input SCENE OPTION SETUP SCENE TV VOL • Select a sound program (p.36) • Enable/disable Compressed Music Enhancer (p.41) 2 Hold down the desired SCENE key until “SET Complete” appears on the front display. VOL. SETComplete 3 L SL SW C R SR If you want to control the corresponding playback device after selecting the scene, hold down the corresponding SCENE key and input selection key together for more than 3 seconds. ENT TV INPUT MUTE Perform the following operations to prepare the settings you want to assign to a scene. • Select an input source (p.34) SUR. DECODE STRAIGHT ENHANCER BD DVD 1 The input source and settings registered to the corresponding scene are selected. The unit turns on automatically when it is in standby mode. TUNER FM Press SCENE. Configuring scene assignments TV CH • The SCENE link playback function allows you to automatically turn on the TV or start playback of an external device connected to the unit via HDMI, in conjunction with a scene selection. To enable SCENE link playback, set “SCENE” (p.76) in the “Setup” menu to “On”. Once the setting is completed successfully, SOURCE/RECEIVER blinks twice. • If you have not registered the remote control code of the playback device yet, see “Registering the remote control codes for playback devices” (p.87) to register it. PLAYBACK ➤ Selecting the input source and favorite settings with one touch (SCENE) En 35 Selecting the sound mode CODE SET SOURCE RECEIVER The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoy playback sources with your favorite sound mode (such as sound field effect or stereo playback). HDMI 1 2 3 4 MHL 1 2 3 5 AV 4 5 6 V-AUX USB NET ❑ Selecting a sound program suitable for movies AUDIO TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET TUNING SUR. DECODE STRAIGHT ENHANCER DIRECT SLEEP SCENE BD DVD TV NET RADIO OPTION SETUP • Press MOVIE repeatedly. MOVIE MUSIC SUR.DECODE STRAIGHT DIRECT ENHANCER This mode lets you enjoy sound field effects optimized for viewing video sources, such as movies, TV programs, and games (p.37). • You can also switch the sound programs and surround decoder by pressing PROGRAM on the front panel. • The sound mode can be applied separately to each input source. • When you play back audio signals with a sampling rate of higher than 96 kHz or playing back DTS Express, the straight decode mode (p.39) is automatically selected. • You can check which speakers are currently outputting sound by looking at the speaker indicators on the unit’s front panel (p.8). ❑ Selecting a sound program suitable for music or stereo playback • Press MUSIC repeatedly. VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU This mode lets you enjoy sound field effects optimized for listening music sources or stereo playback (p.38). MUTE ❑ Selecting a surround decoder MODE • Press SUR.DECODE repeatedly. 1 2 3 4 5 6 7 8 9 0 10 TV INPUT TV VOL MUTE TV CH This mode lets you enjoy unprocessed multichannel playback from 2-channel sources (p.40). ENT ❑ Switching to the straight decode mode • Press STRAIGHT. This mode lets you enjoy unprocessed sounds in original channels (p.39). ❑ Switching to the direct playback mode • Press DIRECT. This mode lets you enjoy pure high fidelity sound by reducing the electrical noise from other circuitry (p.40). ❑ Enabling Compressed Music Enhancer • Press ENHANCER. This mode lets you enjoy compressed music with additional depth and breadth (p.41). PLAYBACK ➤ Selecting the sound mode En 36 Enjoying sound field effects (CINEMA DSP) The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP technology (CINEMA DSP). It allows you to easily create sound fields like actual movie theaters or concert halls in your room. Drama This program features stable reverberations that match a wide range of movie genres, from serious dramas to musicals and comedies. The reverberations are modest, but suitably stereophonic. The sound effects and background music are reproduced with a gentle echo that does not impinge on the articulation of the dialogue. You’ll never get tired listening for long periods. Mono Movie This program reproduces monaural video sources, such as classic movies, in an atmosphere of a good old movie theater. The program creates a pleasant space with depth, by adding breadth and the appropriate reverberation to the original audio. Sports This program allows listeners to enjoy the rich vividness of sport broadcasts and light entertainment programs. In sports broadcasts, the commentators’ voices are positioned clearly at the center, while the atmosphere inside the stadium is realistically conveyed by the peripheral delivery of the sounds of the fans in a suitable space. Action Game This program is suitable for action games, such as car racing and fighting games. The reality of, and emphasis on, various effects makes the player feel like they are right in the middle of the action, allowing for greater concentration. Use this program in combination with Compressed Music Enhancer for a more dynamic and strong sound field. Roleplaying Game This program is suitable for role-playing and adventure games. This program adds depth to the sound field for natural and realistic reproduction of background music, special effects, and dialogue from a wide variety of scenes. Use this program in combination with Compressed Music Enhancer for a clearer and more spatial sound field. Sound program category “CINEMA DSP” lights up VOL. Sci-Fi L SL SW C R SR Sound program • When you play back DTS-HD sources, the DTS decoder is automatically selected. • You can adjust the sound field effect level in “DSP Level” (p.66) in the “Option” menu. ■ Sound programs suitable for movies (MOVIE) The following sound programs are optimized for viewing video sources, such as movies, TV programs, and games. Standard This program creates a sound field that emphasizes the surround feeling without disturbing the original acoustic positioning of multichannel audio, such as Dolby Digital and DTS. Its design is based on the concept of the ideal movie theater, in which the audience is surrounded by beautiful reverberations from the left, right, and rear. Spectacle This program delivers the scale and grandeur of spectacular movie productions. It delivers an expansive sound space to match the cinemascope wide-screen, and boasts a broad dynamic range, providing everything from small delicate sounds to powerful loud booms. Sci-Fi This program clearly reproduces the finely elaborated sound design of the latest Sci-Fi and SFX movies. You can enjoy a variety of cinematographically created virtual spaces reproduced with clear separation between dialogue, sound effects, and background music. Adventure This program is ideal for reproducing the sound design of action and adventure movies precisely. The sound field restrains reverberations, but puts emphasis on reproducing a sensation of expansiveness on both sides, powerful space expanded widely to the left and right. The restrained depth creates a clear and powerful space, while also maintaining the articulation of the sounds and the separation of the channels. PLAYBACK ➤ Selecting the sound mode En 37 ■ Sound programs suitable for music/stereo playback (MUSIC) The following sound programs are optimized for listening to music sources. You can also select stereo playback. Hall in Munich This program simulates a Munich concert hall with approximately 2,500 seats that uses stylish wood for the interior finishing. Fine, beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual seat is at the center left of the arena. Hall in Vienna This program simulates a 1700-seat, middle-sized concert hall with a shoebox shape that is traditional in Vienna. Pillars and ornate carvings create extremely complex reverberations from all around the audience, producing a very full, rich sound. Chamber This program creates a relatively wide space with a high ceiling, like an audience hall in a palace. It offers pleasant reverberations that are suitable for courtly music and chamber music. Cellar Club This program simulates an intimate concert venue with a low ceiling and homey atmosphere. A realistic, live sound field delivers powerful sounds that make you feel as if you are sitting in the front row in front of a small stage. The Roxy Theatre This program creates the sound field of a 460-seat rock music concert venue in Los Angeles. The listener’s virtual seat is at the center left of the hall. The Bottom Line This program creates the sound field at stage front in The Bottom Line, a famous New York jazz club once. The floor can seat 300 people to the left and right in a sound field offering real and vibrant sound. Music Video This program allows you to enjoy videos of pop, rock, and jazz concerts, as if you were there yourself. Immerse yourself in the hot concert atmosphere thanks to the vividness of the singers and solos on stage, a presence sound field that emphasizes the beat of rhythm instruments, and a surround sound field that reproduces the space of a big live hall. 2ch Stereo Use this program to mix down multichannel sources to 2 channels. When multichannel signals are input, they are down mixed to 2 channels and output from the front speakers (this program does not utilize CINEMA DSP). 5ch Stereo Use this program to output sound from all speakers. When you play back multichannel sources, the unit mixes down the source to 2 channels, and then outputs the sound from all speakers. This program creates a larger sound field and is ideal for background music at parties. PLAYBACK ➤ Selecting the sound mode En 38 CODE SET SOURCE RECEIVER ■ Enjoying stereoscopic sound fields (CINEMA DSP 3D) Enjoying unprocessed playback CINEMA DSP 3D creates a natural stereoscopic sound field in your room. ■ Playing back in original channels (straight decode) HDMI 1 2 3 2 3 4 You can play back input sources without any sound field effect processing. MHL 1 5 AV 4 5 6 V-AUX USB NET CINEMA DSP 3D functions when both of the following conditions are met. AUDIO TUNER FM DAB PRESET INFO MEMORY MOVIE MUSIC TUNING SUR. DECODE STRAIGHT STRAIGHT ENHANCER DIRECT SLEEP SCENE BD DVD TV NET RADIO • “CINEMA DSP 3D Mode” (p.76) in the “Setup” menu is set to “On”. 1 VOL. VOLUME ENTER RETURN TOP MENU POP-UP MENU 2 3 5 6 7 9 0 10 TV INPUT TV VOL MUTE TV CH L SL SW C VOL. R SR MUTE MODE 1 3 Hall in Vienna DISPLAY 4 8 ENT Press STRAIGHT. Each time you press the key, the straight decode mode is enabled or disabled. “CINEMA DSP n” lights up OPTION SETUP • One of the sound programs (except 2ch Stereo and 5ch Stereo) is selected (p.37). When the straight decode mode is enabled, the unit produces stereo sound from the front speakers for 2-channel sources such as CDs, and produces unprocessed multichannel sounds for multichannel sources. STRAIGHT L SL SW C R SR ■ Enjoying sound field effects without surround speakers (Virtual CINEMA DSP) If you select one of the sound programs (except 2ch Stereo and 5ch Stereo) when no surround speakers are connected, the unit automatically creates the surround sound field using the front-side speakers. PLAYBACK ➤ Selecting the sound mode En 39 ■ Playing back 2-channel sources in multichannel (surround decoder) CODE SET SOURCE RECEIVER The surround decoder enables unprocessed multichannel playback from 2-channel sources. When a multichannel source is input, it works the same way as the straight decode mode. HDMI 1 2 3 1 2 3 4 MHL 5 AV 4 5 6 V-AUX USB NET For details on each decoder see “Glossary” (p.98). 1 AUDIO TUNER FM DAB PRESET INFO MEMORY MOVIE MUSIC Press SUR.DECODE to select a surround decoder. Each time you press the key, the surround decoder changes. TUNING SUR. DECODE STRAIGHT SUR.DECODE ENHANCER DIRECT SLEEP SCENE BD DVD TV NET RADIO VOLUME ENTER RETURN POP-UP MENU 1 2 3 4 5 6 7 8 9 0 10 TV INPUT TV VOL ENT Press DIRECT. Each time you press the key, the direct playback mode is enabled or disabled. VOL. ProLogic L SL SW C R SR bPro Logic Uses the Dolby Pro Logic decoder suitable for all sources. bPLII Movie Use the Dolby Pro Logic II decoder suitable for movies. bPLII Music Use the Dolby Pro Logic II decoder suitable for music. bPLII Game Use the Dolby Pro Logic II decoder suitable for games. Neo: 6 Cinema Uses the DTS Neo: 6 decoder suitable for movies. Neo: 6 Music Uses the DTS Neo: 6 decoder suitable for music. MUTE MODE 1 VOL. DISPLAY TOP MENU When the direct playback mode is enabled, the unit plays back the selected source with the least circuitry in order to reduce the electrical noise from other circuitry (such as the front display). It allows you to enjoy Hi-Fi sound quality. DIRECT OPTION SETUP Enjoying pure high fidelity sound (direct playback) DIRECT L SL SW C R SR • When the direct playback mode is enabled, the following functions are not available. – Selecting sound programs – Adjusting the tone control – Operating the on-screen and “Option” menus – Viewing information on the front display (when not in operation) TV CH MUTE • You can adjust the surround decoder parameters in “DSP Parameter” (p.76) in the “Setup” menu. PLAYBACK ➤ Selecting the sound mode En 40 Enjoying compressed music with enhanced sound (Compressed Music Enhancer) CODE SET SOURCE RECEIVER HDMI 1 2 3 1 2 3 4 MHL 5 AV 4 5 6 V-AUX USB NET Compressed Music Enhancer adds depth and breadth to the sound, allowing you to enjoy a dynamic sound close to the original sound before it was compressed. This function can be used along with any other sound modes. AUDIO TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET TUNING SUR. DECODE STRAIGHT ENHANCER DIRECT ENHANCER SLEEP SCENE BD DVD TV NET RADIO 1 Press ENHANCER. Each time you press the key, Compressed Music Enhancer is enabled or disabled. OPTION SETUP “ENHANCER” lights up VOLUME ENTER ENHANCER RETURN VOL. DISPLAY TOP MENU POP-UP MENU MUTE Enhancer On L SL SW C R SR MODE 1 2 3 4 5 6 7 8 9 0 10 ENT • Compressed Music Enhancer does not work on the following audio sources. – Signals whose sampling rate is over 48 kHz – High-definition streaming audio TV INPUT TV VOL TV CH MUTE • You can also use “Enhancer” (p.66) in the “Option” menu to enable/disable Compressed Music Enhancer. Enjoying surround sound with headphones (SILENT CINEMA) You can enjoy surround or sound field effects, like a multichannel speaker system, with stereo headphones by connecting the headphones to the PHONES jack and selecting a sound program or a surround decoder. PLAYBACK ➤ Selecting the sound mode En 41 Listening to DAB radio CODE SET SOURCE RECEIVER DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more stable reception compared to analog signals. The unit can also receive DAB+ (an upgraded version of DAB) that allows for more stations using MPEG-4 audio codec (AAC+), which has a more efficient transmission method. HDMI 1 2 3 4 MHL 1 2 3 5 AV 4 5 6 V-AUX USB NET • If no DAB radio stations are found by an initial scan, the message in Step 1 appears again. Press ENTER to start an initial scan again. • You can check reception strength of each DAB channel label (p.45). • To perform an initial scan again after some DAB radio stations are stored, select “Init Scan” (p.65) in the “Option” menu. If you perform an initial scan again, the DAB radio stations currently registered to the preset numbers will be cleared. DAB AUDIO TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET TUNING TUNING ENHANCER DIRECT SLEEP SCENE BD DVD TV NET • The unit supports Band III (174 to 240 MHz) only. • Be sure to check the DAB coverage in your area in that not all areas are currently being covered. For a list of nationwide DAB statuses and worldwide DAB frequencies, check WorldDMB online at http://www.worlddab.org/. SUR. DECODE STRAIGHT You can select a DAB radio station from the stations stored by the initial scan. RADIO OPTION SETUP VOLUME ENTER RETURN ENTER • For details on the antenna connection, see “Connecting the DAB/FM antenna” (p.26). DISPLAY TOP MENU POP-UP MENU MUTE Preparing the DAB tuning MODE 1 2 3 4 5 6 7 8 9 0 10 TV ENT 1 2 Press DAB to select the DAB band. Press TUNING repeatedly to select a DAB radio station. Before tuning into DAB radio stations, follow the procedure below to perform an initial scan. 1 TV CH MUTE VOL. DailyService Press DAB to select the DAB band. The following message appears on the front panel if you have not performed an initial scan yet. INPUT TV VOL Selecting a DAB radio station for reception VOL. L SL SW C R SR • “Off Air” appears when the selected DAB radio station is currently not available. • When the unit is receiving a secondary station, “2” appears next to “DAB”. Press[ENTER] Secondary station 2 VOL. Press ENTER to start an initial scan. VOL. >>>-------30% L SL SW C BBCNational L SL SW C R SR R SR When the initial scan finishes, the unit automatically tunes into the first DAB radio station as stored in station order. • You can watch videos input from external devices while listening to radio by selecting the video input jack in “Video Out” (p.68) in the “Option” menu. VOL. BBCRadio4 L SL SW C R SR PLAYBACK ➤ Listening to DAB radio En 42 Registering favorite DAB radio stations (presets) CODE SET SOURCE RECEIVER HDMI 1 2 3 1 2 3 4 You can register up to 40 DAB radio stations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers. MHL 5 AV 4 5 6 V-AUX USB NET DAB AUDIO TUNER FM • You can register up to 40 favorite radio stations each for DAB and FM bands. DAB PRESET INFO MEMORY MOVIE MUSIC TUNING PRESET SUR. DECODE STRAIGHT MEMORY ENHANCER DIRECT SLEEP ■ Registering a DAB radio station as presets TV NET RADIO OPTION SETUP VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU MUTE MODE 1 2 3 5 6 7 9 0 10 4 8 Tune into a registered DAB radio station by selecting its preset number. 1 2 Press DAB to select the DAB band. Press PRESET repeatedly to select the desired DAB radio station. You can also enter a preset number (01 to 40) directly by using the numeric keys after pressing PRESET once. VOL. Select a DAB radio station and register it to a preset number. SCENE BD DVD ■ Selecting a preset DAB radio station 1 Follow “Selecting a DAB radio station for reception” (p.42) to tune into the desired DAB radio station. 2 Hold down MEMORY for more than 2 seconds. The first time that you do register a station, the selected radio station will be registered to the preset number “01”. Thereafter, each radio station you select will be registered to the next empty (unused) preset number after the most recently registered number. ENT PRESET:01 L SL SW C R SR • “No Presets” appears when no DAB radio stations are registered. • “Wrong Num.” appears when an invalid number is entered. • “Empty” appears when a preset number not in use is entered. VOL. TV INPUT TV VOL MUTE TV CH 01:BBCRadio4 L SL SW C R SR Preset number • To select a preset number for registering, press MEMORY once after tuning into the desired DAB radio station, press PRESET to select a preset number, and then press MEMORY again. VOL. 02:Empty L SL SW C R SR “Empty” (not in use) or “Overwrite?” (in use) PLAYBACK ➤ Listening to DAB radio En 43 ■ Clearing preset DAB radio stations CODE SET Clear DAB radio stations registered to the preset numbers. SOURCE RECEIVER HDMI 1 2 3 2 3 4 MHL 1 5 AV 4 5 6 V-AUX USB NET DAB AUDIO TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET 1 2 3 TUNING Press DAB to select the DAB band. Press OPTION. Use the cursor keys to select “Clear Preset” and press ENTER. Displaying the DAB information The unit can receive various types of DAB information when it is tuned into a DAB radio station. 1 2 Tune into the desired DAB radio station. Press INFO. Each time you press the key, the displayed item changes. INFO VOL. VOL. SUR. DECODE STRAIGHT ENHANCER ProgramType ClearPreset DIRECT SLEEP SCENE BD DVD TV NET RETURN OPTION VOLUME ENTER DISPLAY TOP MENU POP-UP MENU 4 Cursor keys ENTER Use the cursor keys (q/w) to select a preset station to be cleared and press ENTER. 01:Clear? VOL. L SL SW C R SR ClassicMusic Preset station to be cleared 2 3 5 6 7 9 0 10 L SL SW C R SR Information 4 If the preset station is cleared, “Cleared” appears and then the next in-use preset number is displayed. 8 ENT TV VOL. INPUT TV VOL R SR About 3 seconds later, the corresponding information for the displayed item appears. VOL. MUTE MODE 1 SW C Item name RADIO OPTION SETUP L SL TV CH 01:Cleared MUTE 5 6 L SL SW C R SR Repeat step 4 until all desired preset stations are cleared. To exit from the menu, press OPTION. Service Label Station name DLS (Dynamic Label Segment) Information on the current station Ensemble Label Ensemble name Program Type Station genre Date And Time Current date and time Audio Mode Audio mode (monaural/stereo) and bit rate CH Label/Freq. Channel label and frequency Signal Quality Signal reception quality (0 [none] to 100 [best]) DSP Program Sound mode name Audio Decoder Decoder name • Some information may not be available depending on the selected DAB radio station. PLAYBACK ➤ Listening to DAB radio En 44 Checking reception strength of each DAB channel label CODE SET SOURCE RECEIVER ■ DAB frequency information The unit supports Band III (174 to 240 MHz) only. HDMI 1 2 3 1 2 3 4 You can check reception strength of each DAB channel label (0 [none] to 100 [best]). MHL 5 AV 4 5 6 V-AUX USB NET DAB AUDIO TUNER FM DAB PRESET INFO MEMORY MOVIE MUSIC TUNING SUR. DECODE STRAIGHT ENHANCER 1 2 3 DIRECT SLEEP Press DAB to select the DAB band. Press OPTION. Use the cursor keys to select “Tune Aid” and press ENTER. Frequency Channel label Frequency Channel label 174.928 MHz 5A 208.064 MHz 9D 176.640 MHz 5B 209.936 MHz 10A 178.352 MHz 5C 211.648 MHz 10B 180.064 MHz 5D 213.360 MHz 10C 181.936 MHz 6A 215.072 MHz 10D 183.648 MHz 6B 216.928 MHz 11A 185.360 MHz 6C 218.640 MHz 11B 187.072 MHz 6D 220.352 MHz 11C 188.928 MHz 7A 222.064 MHz 11D 190.640 MHz 7B 223.936 MHz 12A 192.352 MHz 7C 225.648 MHz 12B 194.064 MHz 7D 227.360 MHz 12C 195.936 MHz 8A 229.072 MHz 12D 197.648 MHz 8B 230.784 MHz 13A 199.360 MHz 8C 232.496 MHz 13B 201.072 MHz 8D 234.208 MHz 13C 202.928 MHz 9A 235.776 MHz 13D 204.640 MHz 9B 237.488 MHz 13E 206.352 MHz 9C 239.200 MHz 13F SCENE BD DVD TV NET RADIO OPTION SETUP VOLUME ENTER RETURN OPTION DISPLAY TOP MENU POP-UP MENU 4 Use the cursor keys (e/r) to select the desired DAB channel label. Cursor keys ENTER VOL. 5ALevel:80 MUTE DAB channel label MODE 1 2 3 4 5 6 7 8 9 0 10 TV ENT 5 L SL SW C R SR Reception strength To exit from the menu, press OPTION. INPUT TV VOL TV CH MUTE PLAYBACK ➤ Listening to DAB radio En 45 Listening to FM radio CODE SET SOURCE RECEIVER You can tune into an FM radio station by specifying its frequency or selecting from registered radio stations. HDMI 1 2 3 4 MHL 1 2 3 5 AV 4 5 6 V-AUX USB NET Selecting a frequency for reception FM AUDIO TUNER FM DAB PRESET INFO MEMORY MOVIE MUSIC TUNING TUNING 1 DIRECT FM87.50MHz SCENE BD DVD TV NET RETURN 2 DISPLAY POP-UP MENU MUTE MODE MODE Use the following keys to set a frequency. TUNING: Increase/decrease the frequency. Hold down the key for about a second to search stations automatically. VOLUME TOP MENU SW C R L SL SR SBL SBR RADIO OPTION ENTER • You can watch videos input from external devices while listening to radio by selecting the video input jack in “Video Out” (p.68) in the “Option” menu. VOL. SLEEP SETUP • You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM radio reception by pressing MODE. When the signal reception for an FM radio station is unstable, switching to monaural may improve it. Press FM to select the FM band. SUR. DECODE STRAIGHT ENHANCER • “Wrong Station!” appears when you enter a frequency that is out of reception range. Numeric keys: Enter a frequency directly. For example, to select 98.50 MHz, press “9”, “8”, “5” and “0” (or ENT). VOL. 1 2 3 4 5 6 7 8 9 0 10 TV INPUT TV VOL MUTE TV CH STEREO TUNED Numeric keys FM98.50MHz L SL SW C R SR ENT “TUNED” lights up when a signal is received from an FM radio station. “STEREO” also lights up when a stereo signal is received. PLAYBACK ➤ Listening to FM radio En 46 Registering favorite FM radio stations (presets) CODE SET SOURCE RECEIVER • To specify the preset number from which to start the registration, press PRESET or cursor keys (q/w) to select a preset number within 5 seconds after step 4 (while “READY” is displayed) and then press ENTER (or just wait for 5 seconds). HDMI 1 2 3 2 3 4 You can register up to 40 FM radio stations as presets. Once you have registered stations, you can easily tune into them by selecting their preset numbers. MHL 1 5 AV 4 5 6 V-AUX USB NET TUNER FM • You can register up to 40 favorite radio stations each for DAB and FM bands. DAB PRESET INFO MEMORY MOVIE MUSIC TUNING MEMORY PRESET SUR. DECODE STRAIGHT ENHANCER DIRECT SLEEP SCENE BD DVD TV NET RADIO OPTION SETUP OPTION VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU MUTE MODE 1 2 3 4 5 6 7 8 9 0 10 TV INPUT TV VOL When the Auto Preset process finishes, “FINISH” appears and the “Option” menu closes automatically. FM AUDIO • To cancel the Auto Preset process, press RETURN. TV CH ENT Cursor keys ENTER RETURN ■ Registering FM radio stations automatically (Auto Preset) Automatically register FM radio stations with strong signals (up to 40 stations). VOL. AutoPreset ■ Registering an FM radio station manually Select an FM radio station manually and register it to a preset number. • (U.K. and Europe models only) Only Radio Data System broadcasting stations are stored automatically by the Auto Preset function. 1 Follow “Selecting a frequency for reception” (p.46) to tune into the desired FM radio station. 1 2 3 2 Hold down MEMORY for more than 2 seconds. Press FM to select the FM band. Press OPTION. Use the cursor keys to select “Auto Preset”. MUTE VOL. The first time that you do register an FM radio station, the selected radio station will be registered to the preset number “01”. Thereafter, each radio station you select will be registered to the next empty (unused) preset number after the most recently registered number. AutoPreset VOL. STEREO TUNED 01:FM98.50MHz 4 To start the Auto Preset process, press ENTER. L SL SW C R SR Preset number The registration will start in 5 seconds. Press ENTER again to start the registration immediately. • To select a preset number for registering, press MEMORY once after tuning into the desired radio station, press PRESET to select a preset number, and then press MEMORY again. “SEARCH” appears during Auto Preset VOL. VOL. 01:FM87.50MHz STEREO TUNED 02:Empty L SL SW C R SR Preset number from which to start the registration “Empty” (not in use) or the frequency currently registered PLAYBACK ➤ Listening to FM radio En 47 CODE SET SOURCE RECEIVER HDMI 1 2 3 1 2 3 5 6 USB NET FM AUDIO TUNER FM DAB PRESET INFO MEMORY MOVIE MUSIC TUNING PRESET ENHANCER Press PRESET repeatedly to select the desired FM radio station. 1 2 3 You can also enter a preset number (01 to 40) directly by using the numeric keys after pressing PRESET once. PRESET DIRECT Press FM to select the FM band. Press OPTION. Use the cursor keys to select “Clear Preset” and press ENTER. VOL. TV NET RADIO OPTION SETUP DISPLAY TOP MENU POP-UP MENU ClearPreset STEREO TUNED L SL SW C R SR 4 OPTION VOLUME ENTER VOL. 01:FM98.50MHz SCENE RETURN Press FM to select the FM band. SUR. DECODE STRAIGHT SLEEP BD DVD Clear FM radio stations registered to the preset numbers. 1 2 5 AV 4 ■ Clearing preset FM radio stations Tune into a registered FM radio station by selecting its preset number. 4 MHL V-AUX ■ Selecting a preset FM radio station Cursor keys ENTER • “No Presets” appears when no FM radio stations are registered. • “Wrong Num.” appears when an invalid number is entered. VOL. STEREO TUNED • “Empty” appears when a preset number not in use is entered. MUTE Use the cursor keys (q/w) to select a preset station to be cleared and press ENTER. 01:FM98.50MHz L SL SW C R SR MODE Preset station to be cleared 1 2 3 5 6 7 9 0 10 4 8 If the preset station is cleared, “Cleared” appears and then the next in-use preset number is displayed. Numeric keys ENT TV VOL. INPUT TV VOL TV CH 01:Cleared MUTE L SL SW C R SR 5 Repeat step 4 until all desired preset stations are cleared. 6 To exit from the menu, press OPTION. PLAYBACK ➤ Listening to FM radio En 48 Radio Data System tuning CODE SET SOURCE RECEIVER (U.K. and Europe models only) HDMI 1 2 3 1 2 3 Radio Data System is a data transmission system used by FM stations in many countries. The unit can receive various types of Radio Data System data, such as “Program Service”, “Program Type,” “Radio Text” and “Clock Time”, when it is tuned into a Radio Data System broadcasting station. 4 MHL 5 AV 4 5 6 V-AUX USB NET AUDIO • “Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio station does not provide the Radio Data System service. TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET TUNING INFO SUR. DECODE STRAIGHT ENHANCER DIRECT SLEEP SCENE BD DVD TV NET RADIO ■ Displaying the Radio Data System information 1 Tune into the desired Radio Data System broadcasting station. OPTION SETUP • We recommend using “Auto Preset” to tune into the Radio Data System broadcasting stations (p.47). VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU MUTE MODE 1 2 3 4 5 6 7 8 9 0 10 2 Press INFO. Each time you press the key, the displayed item changes. INFO ProgramType TV MUTE L SL SW C R SR ENT Item name INPUT TV VOL VOL. STEREO TUNED TV CH About 3 seconds later, the corresponding information for the displayed item appears. 9850 VOL. STEREO TUNED CLASSICS L SL SW C R SR Information Program Service Program service name Program Type Current program type Radio Text Information on the current program Clock Time Current time DSP Program Sound mode name Audio Decoder Decoder name Frequency Frequency PLAYBACK ➤ Listening to FM radio En 49 Playing back iPod music You can play back iPod music on the unit using a USB cable supplied with the iPod. Connecting an iPod Connect your iPod to the unit with the USB cable supplied with the iPod. • An iPod may not be detected by the unit or some features may not be compatible, depending on the model or software version of the iPod. • To play back iPod videos on the unit, an Apple Composite AV Cable (not supplied) is required. Connect the USB and composite video plugs of the Apple Composite AV cable to the USB jack and VIDEO AUX (VIDEO) jack of the unit, and connect your TV and the unit with a video pin cable (p.21). To select a video, operate the iPod itself in the simple play mode (p.52). 1 Connect the USB cable to the iPod. 2 Connect the USB cable to the USB jack. Supported iPod (as of April 2013) • iPod touch (1st, 2nd, 3rd and 4th generation) • iPod nano (2nd, 3rd, 4th, 5th and 6th generation) • iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone • iPad (3rd generation), iPad 2, iPad The unit (front) RADIO VIDEO AUX STRAIGHT AUDIO USB VIDEO 5V 2.1A VOL. Connected L SL SW C R SR • The iPod charges while it is connected to the unit. If you set the unit to standby mode while the iPod is charging, the iPod continues to charge up to 4 hours. If “Network Standby” (p.82) in the “Setup” menu is set to “On”, it continues to change without limit. • Disconnect the iPod from the USB jack when it is not in use. PLAYBACK ➤ Playing back iPod music En 50 Playback of iPod content CODE SET SOURCE RECEIVER Follow the procedure below to operate the iPod contents and start playback. HDMI 1 2 3 4 • To return to the previous screen, press RETURN. • To switch between the browse and playback screens during playback, press DISPLAY. MHL 1 2 3 You can control the iPod with the menu displayed on the TV screen. 5 AV 4 5 6 V-AUX USB NET USB • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display, or directly operate the iPod itself in the simple play mode (p.52). AUDIO TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET TUNING 1 DIRECT SLEEP TV NET 4 iPod Music Press USB to select “USB” as the input source. 2 RADIO Playlists Artists Albums Songs Genres Composers 5 OPTION SETUP VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU MUTE 3 iPod Top Cursor keys ENTER RETURN Music Videos 1/6 [DISPLAY] to Now Playing 1 List name DISPLAY 2 Contents list MODE Displays the list of iPod content. Use the cursor keys to select an item and press ENTER to confirm the selection. 1/2 1 1 The browse screen is displayed on the TV. SCENE BD DVD ■ Browse screen • “_” (underscore) will be displayed for characters not supported by the unit. SUR. DECODE STRAIGHT ENHANCER • To operate the iPod manually to select content or control playback, switch to the simple play mode (p.52). 2 3 5 6 7 9 0 10 4 3 Item number/total 8 4 Status indicators ENT TV INPUT TV VOL • If playback is ongoing on your iPod, the playback screen is displayed. TV CH MUTE 2 Use the cursor keys to select an item and press ENTER. If a song is selected, playback starts and the playback screen is displayed. Display the current repeat/shuffle settings (p.53) and playback status (such as play/pause). 5 Operation menu Press the cursor key (r) and then use the cursor keys (q/w) to select an item. Press ENTER to confirm the selection. Icon Function Moves 10 pages backward. Moves to the previous page of the list. iPod Now Playing Moves to the next page of the list. Artist Name Album Name Song Title 2:30 [DISPLAY] to List Browse Moves 10 pages forward. 5:10 Moves to the playback screen. PLAYBACK ➤ Playing back iPod music En 51 ■ Playback screen CODE SET SOURCE RECEIVER 1 HDMI 1 2 3 2 3 4 1 iPod Now Playing MHL 1 ■ Operating the iPod itself or remote control (simple play) 5 4 5 6 V-AUX USB NET Album Name 2 Song Title 2:30 Press MODE to switch to the simple play mode. The TV menu screen turns off and iPod operations are enabled. Artist Name AV 5:10 To display the TV menu screen, press MODE again. AUDIO TUNER [DISPLAY] to List Browse FM DAB INFO MEMORY MOVIE MUSIC PRESET TUNING SUR. DECODE STRAIGHT ENHANCER 1 Status indicators DIRECT Display the current repeat/shuffle settings (p.53) and playback status (such as play/pause). SLEEP SCENE BD DVD TV NET 2 Playback information VOLUME ENTER RETURN DISPLAY D TOP MENU POP-UP MENU Cursor keys ENTER RETURN 2 3 5 6 7 9 0 10 TV VOL MUTE Function 4 Cursor keys Select an item. ENTER Confirms the selection. Use the following remote control keys to control playback. RETURN Returns to the previous screen. a Function External device operation keys a Resumes playback from pause. MODE s Stops playback. d Stops playback temporarily. 8 ENT f TV INPUT Operational remote control keys Displays the artist name, album name, song title, and elapsed time/song length. External device operation keys MUTE MODE 1 Operate your iPod itself or the remote control to start playback. RADIO OPTION SETUP 2 TV CH g Skips forward/backward. External device operation keys d Starts playback or stops playback temporarily. s Stops playback. f g h j Skips forward/backward. Searches forward/backward (while holding down). h j Searches forward/backward (by holding down). PLAYBACK ➤ Playing back iPod music En 52 ■ Repeat/shuffle settings CODE SET You can configure the repeat/shuffle settings of your iPod. SOURCE RECEIVER HDMI 1 2 3 1 2 3 4 MHL • During simple play, configure the repeat/shuffle settings directly on your iPod or press MODE to display the TV menu screen and then follow the procedure below. 5 AV 4 5 6 V-AUX USB NET AUDIO TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET When “USB” is selected as the input source, press OPTION. 2 Use the cursor keys to select “Repeat” (Repeat) or “Shuffle” (Shuffle) and press ENTER. TUNING SUR. DECODE STRAIGHT ENHANCER 1 DIRECT SLEEP SCENE BD DVD TV NET RADIO OPTION SETUP • To return to the previous screen during menu operations, press RETURN. OPTION • Texts in parentheses denote indicators on the front display. VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU Cursor keys ENTER RETURN 3 Use the cursor keys (e/r) to select a setting. MUTE Item Setting Function Off (Off) Turns off the repeat function. One (One) Plays back the current song repeatedly. “c” appears in the TV screen. All (All) Plays back all songs repeatedly. “v” appears in the TV screen. Off (Off) Turns off the shuffle function. Songs (Songs) Plays back songs in random order. “x” appears in the TV screen. Albums (Albums) Plays back albums in random order. “x” appears in the TV screen. MODE MODE 1 2 3 4 5 6 7 8 9 0 10 Repeat (Repeat) ENT TV INPUT TV VOL TV CH MUTE Shuffle (Shuffle) 4 To exit from the menu, press OPTION. PLAYBACK ➤ Playing back iPod music En 53 Playing back music stored on a USB storage device CODE SET SOURCE RECEIVER You can play back music files stored on a USB storage device on the unit. Refer to the instruction manuals for the USB storage device for more information. HDMI 1 2 3 4 MHL 1 2 3 5 AV 4 5 6 V-AUX USB NET USB • Disconnect the USB storage device from the USB jack when it is not in use. AUDIO TUNER FM • Stop playback of the USB storage device before disconnect it from the USB jack. DAB PRESET INFO MEMORY MOVIE MUSIC TUNING SUR. DECODE STRAIGHT ENHANCER • The unit is compatible with sampling rate of up to 192 kHz for WAV and FLAC files, and 48 kHz for other files. RADIO • Some features may not be compatible, depending on the model or manufacturer of the USB storage device. SCENE TV NET • The unit supports WAV (PCM format only), MP3, WMA, MPEG-4 AAC and FLAC files (1- or 2-channel audio only). DIRECT SLEEP BD DVD OPTION SETUP • Digital Rights Management (DRM) contents cannot be played back. • The unit does not support a USB hub. DISPLAY TOP MENU POP-UP MENU MUTE • You cannot connect the PC to the USB jack of the unit. Playback of USB storage device contents Follow the procedure below to operate the USB storage device contents and start playback. You can control the USB memory device with the menu displayed on the TV screen. VOLUME ENTER RETURN • If the USB storage device contains many files, it may take time to load the them. In this case, “Loading...” appears in the front display. The unit supports USB mass storage class devices (FAT16 or FAT32 format). Connecting a USB storage device MODE 1 2 3 4 5 6 7 8 9 0 10 1 Connect the USB storage device to the USB jack. • “_” (underscore) will be displayed for characters not supported by the unit. The unit (front) 1 ENT RADIO TV INPUT TV VOL MUTE • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. TV CH The browse screen is displayed on the TV. VIDEO AUX STRAIGHT AUDIO VIDEO Press USB to select “USB” as the input source. 5V 2.1A USB Top Blues Classical Electronica Jazz Pop Rock Soundtrack Speaking 1/12 USB storage device • If playback is ongoing on your USB storage device, the playback screen is displayed. USB Connected VOL. L SL SW C R SR PLAYBACK ➤ Playing back music stored on a USB storage device En 54 2 CODE SET SOURCE RECEIVER ■ Browse screen Use the cursor keys to select an item and press ENTER. 1 HDMI 1 2 3 2 3 If a song is selected, playback starts and the playback screen is displayed. 4 MHL 1 5 AV 4 5 6 V-AUX USB NET 2 USB Now Playing AUDIO TUNER FM PRESET INFO MEMORY MOVIE MUSIC TUNING Blues Classical Electronica Jazz Pop Rock Soundtrack Speaking 3 Artist Name DAB 4 USB Top 5 1/12 [DISPLAY] to Now Playing Album Name Song Title SUR. DECODE STRAIGHT ENHANCER 2:30 1 List name [DISPLAY] to List Browse 2 Contents list DIRECT SLEEP SCENE BD DVD TV NET Displays the list of USB storage device contents. Use the cursor keys to select an item and press ENTER to confirm the selection. RADIO OPTION SETUP 3 Item number/total VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU MUTE • To switch between the browse and playback screens during playback, press DISPLAY. 4 Status indicators Display the current repeat/shuffle settings (p.56) and playback status (such as play/pause). 5 Operation menu 2 3 5 6 7 9 0 10 TV TV VOL 4 8 Press the cursor key (r) and then use the cursor keys (q/w) to select an item. Press ENTER to confirm the selection. Icon Function ENT Moves 10 pages backward. INPUT MUTE DISPLAY • To return to the previous screen, press RETURN. • Files not supported by the unit cannot be selected. MODE 1 Cursor keys ENTER RETURN TV CH Moves to the previous page of the list. Moves to the next page of the list. Moves 10 pages forward. Moves to the playback screen. PLAYBACK ➤ Playing back music stored on a USB storage device En 55 ■ Playback screen CODE SET ■ Repeat/shuffle settings You can configure the repeat/shuffle settings for playback of USB storage device contents. SOURCE RECEIVER HDMI 1 2 3 1 2 3 USB Now Playing 4 MHL 1 5 Artist Name AV 4 5 6 V-AUX USB NET Album Name Song Title AUDIO TUNER DAB INFO MEMORY MOVIE MUSIC PRESET SUR. DECODE STRAIGHT ENHANCER 1 Status indicators TV NET RADIO OPTION SETUP OPTION VOLUME ENTER DISPLAY D TOP MENU POP-UP MENU Cursor keys ENTER RETURN MUTE MODE External device operation keys 1 2 3 4 5 6 7 8 9 0 10 ENT 2 Playback information Displays the artist name, album name, song title, and elapsed time. Use the following remote control keys to control playback. External device operation keys TV CH • Texts in parentheses denote indicators on the front display. 3 Use the cursor keys (e/r) to select a setting. Item Function a Resumes playback from pause. s Stops playback. d Stops playback temporarily. Repeat (Repeat) f TV INPUT • To return to the previous screen during menu operations, press RETURN. Display the current repeat/shuffle settings (p.56) and playback status (such as play/pause). DIRECT SCENE MUTE Use the cursor keys to select “Repeat” (Repeat) or “Shuffle” (Shuffle) and press ENTER. TUNING SLEEP TV VOL 2 [DISPLAY] to List Browse FM RETURN When “USB” is selected as the input source, press OPTION. 2 2:30 BD DVD 1 g Skips forward/backward. Shuffle (Shuffle) 4 Setting Function Off (Off) Turns off the repeat function. One (One) Plays back the current song repeatedly. “c” appears on the TV screen. All (All) Plays back all songs in the current album (folder) repeatedly. “v” appears on the TV screen. Off (Off) Turns off the shuffle function. On (On) Plays back songs in the current album (folder) in random order. “x” appears on the TV screen. To exit from the menu, press OPTION. PLAYBACK ➤ Playing back music stored on a USB storage device En 56 Playing back music stored on media servers (PCs/NAS) CODE SET SOURCE RECEIVER 2 3 4 MHL 1 2 3 Playback of PC music contents You can play back music files stored on your PC or DLNA-compatible NAS on the unit. HDMI 1 5 Follow the procedure below to operate the PC music contents and start playback. AV 4 5 6 V-AUX USB NET NET AUDIO TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET DIRECT SLEEP SCENE BD DVD TV NET RADIO • The unit is compatible with sampling rates of up to 192 kHz for WAV and FLAC files, and 48 kHz for other files. • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. • To play back FLAC files, you need to install server software that supports sharing of FLAC files via DLNA on your PC or use a NAS that supports FLAC files. • “_” (underscore) will be displayed for characters not supported by the unit. 1 OPTION SETUP VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU MUTE MODE 1 2 3 4 5 6 7 8 9 0 10 ENT You can control the PC/NAS with the menu displayed on the TV screen. • The unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC and FLAC files. TUNING SUR. DECODE STRAIGHT ENHANCER • To use this function, the unit and your PC must be connected to the same router (p.27). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.81) in the “Setup” menu. Cursor keys ENTER Media sharing setup Press NET repeatedly to select “SERVER” as the input source. The browse screen is displayed on the TV. To play back music files stored on your PC or DLNA-compatible NAS, first you need to configure the media sharing setting on each music server. SERVER Top DESKTOP NAS A NAS B NOTE ■ For a PC with Windows Media Player installed TV INPUT TV VOL MUTE TV CH 1 Check that Windows Media Player 11 or later is installed on your PC. 2 In the media sharing settings, enable media sharing and allow media to be shared with the device. ■ For a PC or a NAS with other DLNA server software installed 1/4 • If playback of a music file selected from the unit is ongoing on your PC, the playback screen is displayed. 2 Use the cursor keys to select a music server and press ENTER. Refer to the instruction manual for the device or software and configure the media sharing settings. PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 57 3 CODE SET SOURCE RECEIVER Use the cursor keys to select an item and press ENTER. ■ Browse screen 1 HDMI 1 2 3 2 3 If a song is selected, playback starts and the playback screen is displayed. 4 MHL 1 5 AV 4 5 6 V-AUX USB NET 2 SERVER Now Playing AUDIO TUNER FM PRESET INFO MEMORY MOVIE MUSIC TUNING Blues Classical Electronica Jazz Pop Rock Soundtrack Speaking 3 Artist Name DAB 4 SERVER NAS A 5 1/14 [DISPLAY] to Now Playing Album Name Song Title SUR. DECODE STRAIGHT ENHANCER 2:30 1 List name [DISPLAY] to List Browse 2 Contents list DIRECT SLEEP SCENE BD DVD TV NET Displays the list of PC content. Use the cursor keys to select an item and press ENTER to confirm the selection. RADIO OPTION SETUP 3 Item number/total VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU MUTE 2 3 5 6 7 9 0 10 • To switch between the browse and playback screens during playback, press DISPLAY. • Files not supported by the unit cannot be selected. 4 Status indicators Display the current repeat/shuffle settings (p.59) and playback status (such as play/pause). TV VOL 4 8 Press the cursor key (r) and then use the cursor keys (q/w) to select an item. Press ENTER to confirm the selection. Icon Function ENT Moves 10 pages backward. TV INPUT MUTE DISPLAY • To return to the previous screen, press RETURN. 5 Operation menu MODE 1 Cursor keys ENTER RETURN TV CH Moves to the previous page of the list. Moves to the next page of the list. Moves 10 pages forward. Moves to the playback screen. PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 58 ■ Playback screen CODE SET ■ Repeat/shuffle settings You can configure the repeat/shuffle settings for the playback of PC music content. SOURCE RECEIVER HDMI 1 2 3 1 2 3 SERVER Now Playing 4 MHL 1 5 Artist Name AV 4 5 6 V-AUX USB NET Album Name Song Title AUDIO TUNER DAB INFO MEMORY MOVIE MUSIC PRESET SUR. DECODE STRAIGHT ENHANCER 1 Status indicators TV NET RADIO OPTION SETUP OPTION VOLUME ENTER DISPLAY D TOP MENU POP-UP MENU Cursor keys ENTER RETURN MUTE 2 Playback information Displays the artist name, album name, song title, and elapsed time. Use the following remote control keys to control playback. External device operation keys External device operation keys 2 3 4 5 6 7 8 9 0 10 • Text in parentheses denotes indicators on the front display. 3 Use the cursor keys (e/r) to select a setting. Item a Resumes playback from pause. s Stops playback. d Stops playback temporarily. Repeat (Repeat) INPUT TV CH Function Off (Off) Turns off the repeat function. One (One) Plays back the current song repeatedly. “c” appears on the TV screen. All (All) Plays back all songs in the current album (folder) repeatedly. “v” appears on the TV screen. Off (Off) Turns off the shuffle function. On (On) Plays back songs in the current album (folder) in random order. “x” appears on the TV screen. ENT f TV Setting Function MODE 1 • To return to the previous screen during menu operations, press RETURN. Display the current repeat/shuffle settings (p.59) and playback status (such as play/pause). DIRECT SCENE MUTE Use the cursor keys to select “Repeat” (Repeat) or “Shuffle” (Shuffle) and press ENTER. TUNING SLEEP TV VOL 2 [DISPLAY] to List Browse FM RETURN When “SERVER” is selected as the input source, press OPTION. 2 2:30 BD DVD 1 g Skips forward/backward. Shuffle (Shuffle) • You can also use a DLNA-compatible Digital Media Controller (DMC) to control playback. For details, see “DMC Control” (p.82). 4 To exit from the menu, press OPTION. PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS) En 59 Listening to Internet radio CODE SET SOURCE RECEIVER You can listen to Internet radio stations from all over the world. HDMI 1 2 3 4 You can control the Internet radio with the menu displayed on the TV screen. MHL 1 2 3 5 AV 4 5 6 V-AUX USB NET The browse screen is displayed on the TV. • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. TUNER DAB PRESET INFO MEMORY MOVIE MUSIC TUNING • The unit uses the vTuner Internet radio station database service. SCENE TV NET RADIO • This service may be discontinued without notice. OPTION SETUP VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU Bookmarks Locations Genres New Stations Popular Stations Podcasts Help • You may not be able to receive some Internet radio stations. DIRECT SLEEP BD DVD NET RADIO Top • To use this function, the unit must be connected to the Internet (p.27). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.81) in the “Setup” menu. SUR. DECODE STRAIGHT ENHANCER Press NET repeatedly to select “NET RADIO” as the input source. NET AUDIO FM 1 MUTE Cursor keys ENTER RETURN DISPLAY 1/7 2 Use the cursor keys to select an item and press ENTER. If an Internet radio station is selected, playback starts and the playback screen is displayed. MODE 1 2 3 5 6 7 9 0 10 4 8 ENT NET RADIO Now Playing TV INPUT TV VOL MUTE TV CH Station Name Album Name Song Title 2:30 [DISPLAY] to List Browse • To return to the previous screen, press RETURN. • To switch between the browse and playback screens during playback, press DISPLAY. • You can register your favorite Internet radio stations to the “Bookmarks” folder by selecting “NET RADIO” as the input source on the unit and then accessing the following website with the web browser on your PC. To use this feature, you need the vTuner ID of the unit and your e-mail address to create your personal account. You can check the vTunerID (MAC address of the unit) in “Information” (p.81) in the “Setup” menu. http://yradio.vtuner.com/ PLAYBACK ➤ Listening to Internet radio En 60 ■ Browse screen CODE SET ■ Playback screen SOURCE RECEIVER 1 HDMI 1 2 3 1 2 3 5 AV 4 5 6 V-AUX USB NET 2 4 NET RADIO Top 4 MHL 1 NET RADIO Now Playing Bookmarks Locations Genres New Stations Popular Stations Podcasts Help 5 Station Name 2 Album Name Song Title 2:30 AUDIO TUNER FM 3 DAB PRESET INFO MEMORY MOVIE MUSIC TUNING SUR. DECODE STRAIGHT ENHANCER SCENE TV NET 1 List name 1 Playback indicator 2 Contents list 2 Playback information Displays the list of Internet radio content. Use the cursor keys to select an item and press ENTER to confirm the selection. RADIO OPTION SETUP [DISPLAY] to List Browse DIRECT SLEEP BD DVD 1/7 [DISPLAY] to Now Playing Displays the station name, album name, song title, and elapsed time. 3 Item number/total VOLUME ENTER RETURN DISPLAY D TOP MENU POP-UP MENU Cursor keys ENTER MUTE External device operation keys 2 3 4 5 6 7 8 9 0 10 TV MUTE Press the cursor key (r) and then use the cursor keys (q/w) to select an item. Press ENTER to confirm the selection. Icon Function Moves 10 pages backward. ENT Moves to the previous page of the list. INPUT TV VOL • Some information may not be available depending on the station. 5 Operation menu MODE 1 • Use the external device operation key (s) to stop playback. 4 Playback indicator TV CH Moves to the next page of the list. Moves 10 pages forward. Moves to the playback screen. PLAYBACK ➤ Listening to Internet radio En 61 Playing back iTunes/iPod music via a network (AirPlay) The AirPlay function allows you to play back iTunes/iPod music on the unit via network. Playback of iTunes/iPod music contents Follow the procedure below to play back iTunes/iPod music contents on the unit. iTunes PC 1 Router The unit Starts playback on iTunes or iPod Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod. If the iTunes/iPod recognizes the unit, the AirPlay icon ( ) appears. iTunes (example) iPod (example) Playback starts iPod • To use this function, the unit and your PC or iPod must be connected to the same router (p.27). You can check whether the network parameters (such as the IP address) are properly assigned to the unit in “Information” (p.81) in the “Setup” menu. Supported iTunes/iPod (as of April 2013) • If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly. 2 • iTunes 10.2.2 or later (Windows/Mac) On the iTunes/iPod, click (tap) the AirPlay icon and select the unit (network name of the unit) as the audio output device. • iPod touch, iPhone or iPad with iOS 4.3.3 or later iTunes (example) iPod (example) Network name of the unit 3 Select a song and start playback. The unit automatically selects “AirPlay” as the input source and starts playback. The playback screen is displayed on the TV. • The playback screen is available only when your TV is connected to the unit via HDMI. PLAYBACK ➤ Playing back iTunes/iPod music via a network (AirPlay) En 62 Use the following remote control keys to control playback. CODE SET • You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network Standby” (p.82) in the “Setup” menu to “On”. SOURCE RECEIVER HDMI 1 2 3 2 3 4 • You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network Name” (p.82) in the “Setup” menu. MHL 1 5 • If you select the other input source on the unit during playback, playback on the iTunes/iPod stops automatically. AV 4 5 6 V-AUX USB NET • You can adjust the unit’s volume from the iTunes/iPod during playback. To disable volume controls from iTunes/iPod, set “Volume Interlock” (p.68) in the “Option” menu to “Off”. AUDIO TUNER FM DAB PRESET MEMORY MOVIE MUSIC ENHANCER • When you use iTunes/iPod controls to adjust volume, the volume may be unexpectedly loud. This could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop playback on the iTunes/iPod immediately. DIRECT SCENE TV NET RADIO OPTION SETUP s Stops playback. d Stops playback temporarily. f Skips forward/backward. • To control iTunes playback with the remote control of the unit, you need to configure the iTunes preferences to enable iTunes control from remote speakers in advance. iTunes (example of English version) ■ Playback screen VOLUME ENTER DISPLAY D TOP MENU POP-UP MENU MUTE 1 AirPlay Now Playing MODE External device operation keys 1 2 3 4 5 6 7 8 Artist Name Album Name 2 Song Title 2:30 9 Resumes playback from pause. SUR. DECODE STRAIGHT SLEEP RETURN a g TUNING Function Caution INFO BD DVD External device operation keys 10 0 5:30 ENT TV INPUT TV VOL TV CH MUTE 1 Playback indicator Check this box 2 Playback information Displays the artist name, album name, song title, and elapsed time/song length. PLAYBACK ➤ Playing back iTunes/iPod music via a network (AirPlay) En 63 Viewing the current status CODE SET SOURCE RECEIVER HDMI 1 2 3 1 2 3 4 MHL 5 Switching information on the front display Input source group Item 1 HDMI 1–5 AV 1–6 AUDIO V-AUX Input (input source name), DSP Program (sound mode name), Audio Decoder (decoder name*) AV 4 5 6 V-AUX USB NET AUDIO TUNER Press INFO. Each time you press the key, the displayed item changes. VOL. FM DAB INFO MEMORY MOVIE MUSIC PRESET TUNING INFO SUR. DECODE STRAIGHT ENHANCER DIRECT AudioDecoder L SL SW C R SR Item name USB SERVER AirPlay SLEEP SCENE BD DVD TV NET RADIO OPTION SETUP About 3 seconds later, the corresponding information for the displayed item appears. RETURN DISPLAY TOP MENU POP-UP MENU MUTE ProLogic L SL SW C R SR Song (song title), Album (album name), Station (station name), DSP Program (sound mode name), Audio Decoder (decoder name*) TUNER (DAB) See “Displaying the DAB information” (p.44) for details. Frequency (frequency), DSP Program (sound mode name), Audio Decoder (decoder name*) Information TUNER (FM) MODE 1 2 3 5 6 7 9 0 10 4 8 ENT • Available items vary depending on the selected input source. The displayed item can also be applied separately to each input source group. * During simple playback of iPod: Input (input source name), DSP Program (sound mode name), Audio Decoder (decoder name) NET RADIO VOL. VOLUME ENTER Song (song title), Artist (artist name), Album (album name), DSP Program (sound mode name), Audio Decoder (decoder name*) * (U.K. and Europe models only) Radio Data System data is also available when the unit is tuned into a Radio Data System broadcasting station (p.49). * The name of the audio decoder currently activated is displayed. If no audio decoder is activated, “Decoder Off” appears. TV INPUT TV VOL TV CH MUTE PLAYBACK ➤ Viewing the current status En 64 Configuring playback settings for different playback sources (Option menu) You can configure separate playback settings for different playback sources. This menu is available on the front panel (or on the TV screen), allowing you to easily configure settings during playback. 1 Press OPTION. Option menu items • Available items vary depending on the selected input source. • Text in parentheses denotes indicators on the front display. OPTION VOL. ToneControl L SL SW C R SR • Depending on the region of purchase, some menu items for audio streaming services are also available. For details, refer to each manual on the supplied CD-ROM. Item Function Tone Control (Tone Control) Adjusts the high-frequency range and low-frequency range of sounds. 66 Adjusts the sound field effect level. 66 Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when the volume is adjusted. 66 Enhancer (Enhancer) Enables/disables Compressed Music Enhancer. 66 Input Trim (In.Trim) Corrects volume differences between input sources. 67 Front display DSP Level (DSP Level) Option Tone Control DSP/Surround Volume Trim Lipsync DSP/Surround Adaptive DRC (DSP/Surround) (A.DRC) Page Signal Info Audio In TV screen 2 Use the cursor keys to select an item and press ENTER. • To return to the previous screen during menu operations, press RETURN. 3 4 Volume Trim (Volume Trim) Use the cursor keys (e/r) to select a setting. Subwoofer Trim Fine-adjusts the subwoofer volume. (SW.Trim) 67 Lipsync (Lipsync) Enables/disables the “Lipsync” setting in the “Setup” menu. 67 Signal Info (Signal Info) Displays information about the video/audio signal. 67 Audio In (Audio In) Combines the video jack of the selected input source with an audio jack of others. 68 Video Out (Video Out) Selects a video to be output with radio sounds. 68 Auto Preset (Auto Preset) Automatically registers FM radio stations with strong signals as presets. 47 Clear Preset (Clear Preset) Clears DAB radio stations (p.44) or FM radio stations (p.48) registered to preset numbers. — Init Scan (Init Scan) Performs an initial scan for DAB radio reception. 42 Tune Aid (Tune Aid) Checks reception strength of each DAB channel label. 45 Repeat (Repeat) Configures the repeat setting for the iPod (p.53), USB storage device (p.56), or media server (p.59). — To exit from the menu, press OPTION. PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu) En 65 Item Function Page Shuffle (Shuffle) Configures the shuffle setting for the iPod (p.53), USB storage device (p.56), or media server (p.59). — Volume Interlock (Interlock) Enables/disables volume controls from iTunes/iPod via AirPlay. 68 ❑ Adaptive DRC (A.DRC) Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when the volume level is adjusted. When it is set to “On”, it is useful for listening to playback at a low volume at night. Settings ■ Tone Control (Tone Control) On (On) Automatically adjusts the dynamic range. Off (Off) (default) The dynamic range is not automatically adjusted. Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds. Default Bypass (Bypass) • If you set an extreme value, sounds may not match those from other channels. Adjusting with the front panel controls a Press TONE CONTROL to select “Treble” or “Bass”. Volume: low On Off Volume: high Output level Setting range -6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a high volume. Output level Choices Treble (Treble), Bass (Bass) On Off Input level Input level ❑ Enhancer (Enhancer) Enables/disables Compressed Music Enhancer (p.41). b Press PROGRAM to make an adjustment. • This setting is applied separately to each input source. ■ DSP/Surround (DSP/Surround) Configures the sound field program and surround settings. • You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer (p.41). Settings ❑ DSP Level (DSP Level) Off (Off) Disables Compressed Music Enhancer. Adjusts the sound field effect level. On (On) Enables Compressed Music Enhancer. Setting range -6 dB to +3 dB (1 dB increments) Default 0 dB Default TUNER (DAB/FM), USB, (network sources): On (On) Others: Off (Off) PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu) En 66 ■ Volume Trim (Volume Trim) ■ Signal Info (Signal Info) Fine-adjusts volume difference between input sources or subwoofer volume. Displays information about the video/audio signal. Choices ❑ Input Trim (In.Trim) Corrects volume differences between input sources. If you are bothered by volume differences when switching between input sources, use this function to correct it. Format (FORMAT) Audio format of the input signal Channel (CHAN) The number of source channels in the input signal (front/surround/LFE) For example, “3/2/0.1” means 3 front channels, 2 surround channels, and LFE. • This setting is applied separately to each input source. Setting range -6.0 dB to +6.0 dB (0.5 dB increments) Default 0.0 dB Sampling (SAMPL) The number of samples per second of the input digital signal Bitrate (B RATE) The amount of data per second of the input bitstream signal Input (V IN) Type and resolution of the input digital video signal Output (V OUT) Type and resolution of the output digital video signal ❑ Subwoofer Trim (SW.Trim) Fine-adjusts the subwoofer volume. • To switch the information on the front display, press the cursor keys (q/w) repeatedly. Setting range -6.0 dB to +6.0 dB (0.5 dB increments) Default 0.0 dB ■ Lipsync (Lipsync) Enables/disables the adjustment configured in “Lipsync” (p.77) in the “Setup” menu. • This setting is applied separately to each input source. Settings Off (Off) Disables the “Lipsync” adjustment. On (On) Enables the “Lipsync” adjustment. Default AirPlay: Off (Off) Others: On (On) PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu) En 67 ■ Audio In (Audio In) ■ Volume Interlock (Interlock) Combines the video jack of the selected input source (HDMI 1–5 or AV 1–2) with an audio jack of others. For example, use this function in the following cases. Enables/disables volume controls from iTunes/iPod via AirPlay. • Connecting a playback device that supports HDMI video output, but not HDMI audio output • Connecting a playback device that has component video jacks and analog stereo jacks (such as game consoles) Input sources HDMI 1–5, AV 1–2 Settings Off (Off) Disables volume controls from iTunes/iPod. Limited (Ltd) (default) Enables volume controls from iTunes/iPod within the limited range (-80 dB to 0 dB and mute). Full (Full) Enables volume controls from iTunes/iPod in the full range (-80 dB to +16.5 dB and mute). ■ Setup procedure (To input audio through a digital optical jack) Select “AV 1” or “AV 4” and connect the device to the unit’s corresponding audio jacks with a digital optical cable. (To input audio through a digital coaxial jack) Select “AV 2” or “AV 3” and connect the device to the unit’s corresponding audio jacks with a digital coaxial cable. (To input audio through analog audio jacks) Select “AV 5”, “AV 6”, or “AUDIO”, and connect the device to the unit’s corresponding audio jacks with a stereo pin cable. ■ Video Out (Video Out) Selects a video to be output with radio sounds. Settings Off (Off) (default) Does not output video. HDMI 1–5, AV 1–6, V-AUX Outputs video input through the corresponding video input jacks. PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu) En 68 CONFIGURATIONS Configuring various functions (Setup menu) You can configure the unit’s various function with the menu displayed on the TV screen. • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display. 1 2 Press SETUP. Use the cursor keys to select a menu and press ENTER. Setup Speaker Configuration HDMI Distance Sound Level ECO Equalizer Function Test Tone Network Language 3 Use the cursor keys to select an item and press ENTER. Setup Speaker Configuration HDMI Distance Sound Level ECO Equalizer Function Test Tone Network Language • To return to the previous screen during menu operations, press RETURN. 4 5 Use the cursor keys (e/r) to select a setting and press ENTER. To exit from the menu, press SETUP. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 69 Setup menu items Menu Item Configuration Speaker Function Subwoofer Selects whether or not a subwoofer is connected. 72 Front Selects the size of the front speakers. 72 Center Selects whether or not a center speaker is connected and its size. 72 Surround Selects whether or not surround speakers are connected and their size. 72 Crossover Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”. 73 Subwoofer Phase Sets the phase of the subwoofer. 73 Extra Bass Sets the speakers to produce the front channel low-frequency components. 73 Distance Sets the distance between each speaker and listening position. 74 Level Adjusts the volume of each speaker. 74 Equalizer Adjusts the tone with an equalizer. 74 Enables/disables the test tone output. 74 HDMI Control Enables/disables HDMI Control. 75 Audio Output Selects a device to output audio. 75 Standby Through Selects whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 75 TV Audio Input Selects an audio input jack of the unit to be used for TV audio input. 75 Standby Sync Selects whether to use HDMI control to link the standby behavior of the TV and the unit. 76 ARC Enables/disables ARC. 76 SCENE Enables/disables SCENE link playback. 76 CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 76 Panorama Enables/disables the broadening effect of the front sound field. 76 Center Width Adjusts the broadening effect of the center sound field. 77 Dimension Adjusts the difference in level between the front and surround sound fields. 77 Center Image Adjusts the center orientation level (broadening effect) of the front sound field. 77 Select Selects the method to adjust the delay between video and audio output. 77 Adjustment Adjusts the delay between video and audio output manually. 77 Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 78 Max Volume Sets the maximum volume to prevent excessive loudness. 78 Initial Volume Sets the initial volume for when this receiver is turned on. 78 Test Tone HDMI Page Configuration DSP Parameter Sound Lipsync Volume CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 70 Menu Item Function Page Auto Power Standby Sets the amount of time for the auto-standby function. 78 ECO Mode Enables/disables the eco mode (power saving mode). 79 Input Rename Changes the input source name displayed on the front display. 79 Dimmer Adjusts the brightness of the front display. 80 Prevents accidental changes to the settings. 80 Selects how to supply power through the DC OUT jack. 80 Information Displays the network information on the unit. 81 IP Address Configures the network parameters (such as IP address). 81 MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 82 DMC Control Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback. 82 ECO Function Memory Guard DC OUT Network Language Power Mode Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 82 Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 82 Network Update Updates the firmware via the network. 83 Select an on-screen menu language. 83 CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 71 ❑ Front Speaker Selects the size of the front speakers. Configures the speaker settings manually. Settings Setup Speaker Configuration HDMI Distance Sound Level ECO Equalizer Function Test Tone Small (default) Select this option for small speakers. The subwoofer will produce front channel low-frequency components (configurable in “Crossover”). Large Select this option for large speakers. The front speakers will produce all of the front channel frequency components. Network Language • “Front” is automatically set to “Large” when “Subwoofer” is set to “None”. ■ Configuration ❑ Center Configures the output characteristics of the speakers. Selects whether or not a center speaker is connected and its size. Settings • When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm (6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”). Small (default) Select this option for small speakers. The subwoofer or front speakers will produce center channel low-frequency components (configurable in “Crossover”). Large Select this option for large speakers. The center speaker will produce all of the center channel frequency components. None Select this option when no center speaker is connected. The front speakers will produce center channel audio. ❑ Subwoofer Selects whether or not a subwoofer is connected. Settings Use (default) Select this option when a subwoofer is connected. The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. None Select this option when no subwoofer is connected. The front speakers will produce LFE (low-frequency effect) channel audio and low-frequency components from other channels. ❑ Surround Selects whether or not surround speakers are connected and their sizes. Settings Small (default) Select this option for small speakers. The subwoofer or front speakers will produce surround channel low-frequency components (configurable in “Crossover”). Large Select this option for large speakers. The surround speakers will produce all of the surround channel frequency components. None Select this option when no surround speakers are connected. The front speakers will produce surround channel audio. Virtual CINEMA DSP works when you select a sound program. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 72 ❑ Crossover Sets the lower limit of the low-frequency components that can be output from a speaker whose size is set to “Small”. A frequency sound lower than the specified value will be produced from the subwoofer or front speakers. Settings 40 Hz, 60 Hz, 80 Hz (default), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz • If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and crossover frequency to maximum. ❑ Subwoofer Phase Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch the subwoofer phase. Settings Normal (default) Does not reverse the subwoofer phase. Reverse Reverses the subwoofer phase. ❑ Extra Bass Sets the speakers to produce the front channel low-frequency components. Settings Off (default) Only the front speakers produce the front channel low-frequency components. On Both the front speakers and subwoofer produce the front channel low-frequency components. • This setting is not available when “Subwoofer” is set to “None”, or when “Front” is set to “Small”. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 73 ■ Distance Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance from “Meter” or “Feet”. Choices Front L, Front R, Center, Surround L, Surround R, Subwoofer Setting range 0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments Default Front L, Front R, Subwoofer: 3.00 m (10.0 ft) Center: 2.60 m (8.6 ft) Others: 2.40 m (8.0 ft) • “PEQ” is available only when the YPAO has been performed (p.30). • By using test tones, you can make an adjustment while confirming its effect. ■ Manual equalizer adjustment 1 2 Set “EQ Select” to “GEQ”. 3 Use the cursor keys (q/w) to select the desired band (frequency) and the cursor keys (e/r) to adjust the gain. Use the cursor keys (q/w) to select “Channel” and the cursor keys (e/r) to select the desired speaker channel. Setting range -6.0 dB to +6.0 dB ■ Level Equalizer Adjusts the volume of each speaker. EQ Select GEQ Edit Channel 63Hz 160Hz 400Hz 1kHz 2.5kHz 6.3kHz 16kHz Choices Front L, Front R, Center, Surround L, Surround R, Subwoofer Setting range -10.0 dB to +10.0 dB (0.5 dB increments) Default Front L, Front R, Subwoofer: 0.0 dB Others: -1.0 dB • By using test tones, you can make an adjustment while confirming its effect. GEQ Front L Back:RETURN 4 To exit from the menu, press SETUP. ■ Test Tone Enables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect. ■ Equalizer Adjusts the tone with an equalizer. Settings ❑ EQ Select Off (default) Does not output test tones. Selects the type of equalizer to be used. On Outputs test tones automatically when you adjust the speaker balance or equalizer. Settings PEQ Applies the parametric equalizer values obtained by the YPAO measurement (p.30). GEQ (default) Select this option when you want to adjust the equalizer manually. For details, see “Manual equalizer adjustment”. Off Does not use the equalizer. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 74 HDMI HDMI OUT (TV) Enables/disables the audio output from a TV connected to the HDMI OUT jack. Configures the HDMI settings. Setup Speaker Settings Off (default) Disables the audio output from the TV. On Enables the audio output from the TV. Configuration HDMI ❑ Standby Through Sound ECO Function Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. If this function is set to “On”, you can use the input selection keys (HDMI 1–5) to select an HDMI input even when the unit is in standby mode (the standby indicator on the unit blinks). Network Language Settings ■ Configuration ❑ HDMI Control Off (default) Does not output videos/audio to the TV. On Outputs videos/audio to the TV. (The unit consumes more power than when “Off” is selected.) Enables/disables HDMI Control (p.101). Settings Off (default) Disables HDMI Control. • This setting is available only when “HDMI Control” is set to “Off”. On Enables HDMI Control. Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”, and “SCENE”. ❑ TV Audio Input Selects an audio input jack of the unit to be used for TV audio input when “HDMI Control” is set to “On”. The unit’s input source automatically switches to TV audio when the TV input is switched to its built-in tuner. • To use HDMI control, you need to perform the HDMI Control link setup (p.101) after connecting HDMI Control-compatible devices. Settings AV 1–6, AUDIO ❑ Audio Output Default AV 4 Selects a device to output audio. • This setting is available only when “HDMI Control” is set to “Off”. • When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting an external device because the input will be used for TV audio input. Amp Enables/disables the audio output from the speakers connected to the unit. Settings Off Disables the audio output from the speakers. On (default) Enables the audio output from the speakers. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 75 ❑ Standby Sync Sound Select whether to use HDMI control to link the standby behavior of the TV and the unit when “HDMI Control” is set to “On”. Configures the audio output settings. Settings Off Does not set the unit to standby mode when the TV is turned off. On Sets the unit to standby mode when the TV is turned off. Auto (default) Sets the unit to standby mode when the TV is turned off only when the unit is receiving TV audio or HDMI signals. Setup Speaker DSP Parameter HDMI Lipsync Sound Volume ECO Function Network Language ❑ ARC Enables/disables ARC (p.17) when “HDMI Control” is set to “On”. Settings Off Disables ARC. On (default) Enables ARC. ■ DSP Parameter Configures the surround decoder settings. ❑ CINEMA DSP 3D Mode • You do not need to change this setting normally. In case noises are produced from the speakers connected to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off” and use the TV’s speakers. Enables/disables CINEMA DSP 3D (p.39). If this function is set to “On”, CINEMA DSP 3D functions with the selected sound programs (except 2ch Stereo and 5ch Stereo). Settings ❑ SCENE Off Disables CINEMA DSP 3D. Enables/disable SCENE link playback when “HDMI Control” is set to “On”. On (default) Enables CINEMA DSP 3D. When SCENE link playback is enabled, HDMI Control-compatible devices connected to the unit via HDMI automatically works as follows, with a scene selection. • TV: turning on and displaying video from the playback device • Playback device: starting playback Choices (SCENE keys) BD/DVD, TV, NET, RADIO On Enables/disables the broadening effect of the front sound field. When this function is enabled, you can wrap front right/left channel sounds around the field and generate a spacious sound field in combination with the surround sound field. This setting is effective when “bPLII Music” is selected. Settings Settings Off ❑ Panorama Disables SCENE link playback for the selected SCENE key. Enables SCENE link playback for the selected SCENE key. Off (default) Disables the broadening effect of the front sound field. On Enables the broadening effect of the front sound field. Default BD/DVD, TV: On NET, RADIO: Off • SCENE link playback may not work properly due to the compatibility between devices. We recommend using TV and playback devices from the same manufacturer so that HDMI Control works more effectively. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 76 ❑ Center Width ■ Lipsync Adjusts the broadening effect of the center sound field. Higher to enhance the broadening effect, and lower to reduce it (closer to center). This setting is effective when “bPLII Music” is selected. Adjusts the delay between video and audio output. Setting range 0 to 7 Default 3 ❑ Dimension Adjusts the difference in level between the front and surround sound fields. Higher to strengthen the front sound field and lower to strengthen the surround sound field. This setting is effective when “bPLII Music” is selected. Setting range -3 to +3 • You can enable/disable the Lipsync function by input sources in “Lipsync” (p.67) in the “Option” menu. ❑ Select Selects the method to adjust the delay between video and audio output. Setting range Manual Select this option when you want to adjust the delay between video and audio output manually. Adjust the audio output timing in “Adjustment”. Auto (default) Adjusts the delay between video and audio output automatically when a TV that supports an automatic lipsync function is connected to the unit via HDMI. If necessary, you can fine-adjust the audio output timing in “Adjustment”. Default 0 ❑ Center Image Adjusts the center orientation level (broadening effect) of the front sound field. Higher to strengthen the center orientation level (less broadening effect) and lower to weaken (more broadening effect). This setting is effective when “Neo:6 Music” is selected. Setting range 0.0 to 1.0 Default 0.3 • “Select” is automatically set to “Manual” depending on the TV connected to the unit. ❑ Adjustment Adjusts the delay between video and audio output manually when “Select” is set to “Manual”. You can fine-adjust the audio output timing when “Select” is set to “Auto”. Setting range 0 ms to 250 ms (1 ms increments) Default 0 ms CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 77 ■ Volume ECO Configures the volume settings. Configures the power supply settings. ❑ Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. Settings Setup Speaker Auto Power Standby HDMI ECO Mode Sound ECO Maximum (default) Produces audio without adjusting the dynamic range. Function Standard Optimizes the dynamic range for regular home use. Language Min/Auto Sets the dynamic range for clear sound even at night or at low volumes. When playing back Dolby TrueHD signals, the dynamic range is automatically adjusted based on the input signal information. ❑ Max Volume Sets the maximum volume to prevent excessive loudness. Setting range -30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB Default +16.5 dB ❑ Initial Volume Sets the initial volume when the receiver is turned on. Settings Off (default) Sets the level to the volume level of the unit when it last entered standby mode. Mute Sets the unit to mute the audio output. Network ■ Auto Power Standby Sets the amount of time for the auto-standby function. If you do not operate the unit for the specified time, the unit will automatically go into standby mode. Settings Off Does not set the unit to standby mode automatically. 2 hours, 4 hours, 8 hours, 12 hours Sets the unit to standby mode when you have not operated the unit for the specified time. For example, when “2 hours” is selected, the unit will switch to standby mode if you do not operate it for 2 hours. Default U.K. and Europe models: 8 hours Other models: Off • Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front display. -80.0 dB to +16.5 dB Sets the level to the specified volume level. (0.5 dB increments) CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 78 ■ ECO Mode Function Enables/disables the eco (power saving) mode. When the eco mode is enabled, you can reduce the unit’s power consumption. Configures the functions that make the unit easier to use. Settings Setup Off (default) Disables the eco mode. On Enables the eco mode. Speaker Input Rename HDMI Dimmer Sound Memory Guard ECO DC OUT Function Network Language • Be sure to press ENTER to restart the unit after selecting a setting. The new setting will take effect after the unit is restarted. • When “ECO Mode” is set to “On”, the front panel display may become dark. • If you want to play audio at high volume, set “ECO Mode” to “Off”. ■ Input Rename Changes the input source name displayed on the front display. Input sources HDMI 1–5, AV 1–6, AUDIO, USB, V-AUX ■ Procedure 1 Use the cursor keys (q/w) to select an input source to be renamed and press ENTER. • To select a name from the presets, use the cursor keys (q/w) to select an input source and the cursor keys (e/r) to select a preset name. 2 Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a character. Input Rename HDMI1 B l u - r a y OK:ENTER CANCEL:RETURN 3 To confirm the new name, press ENTER. • To cancel the entry, press RETURN. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 79 4 5 To change another input source name, repeat steps 1 to 3. ■ DC OUT To exit from the menu, press SETUP. Configures the DC OUT jack setting. ❑ Power Mode ■ Dimmer Selects how to supply power to the Yamaha AV accessory connected to the DC OUT jack. Adjusts the brightness of the front display. Setting range -4 to 0 (higher to brighten) Settings Default 0 Continuous (default) Supplies power through the DC OUT jack continuously regardless of the power state (on/standby) of the unit. Power Sync. Supplies power through the DC OUT jack only when the unit is turned on. • The front display may become dark when “ECO Mode” (p.79) is set to “On”. ■ Memory Guard Prevents accidental changes to the settings. Settings Off (default) Does not protect the settings. On Protects the settings until “Off” is selected. • When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen. o Memory Guard Memory Guard Icon On Back:RETURN CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 80 ■ IP Address Network Configures the network settings. Configures the network parameters (such as IP address). ❑ DHCP Select whether to use a DHCP server. Setup Speaker Information HDMI IP Address Sound MAC Address Filter ECO DMC Control Function Network Standby Network Network Name Language Network Update Settings Off Does not use a DHCP server. Configure the network parameters manually. For details, see “Manual network settings”. On (default) Uses a DHCP server to automatically obtain the unit’s network parameters (such as IP address). ■ Manual network settings ■ Information Displays the network information on the unit. Status The connection status of the NETWORK jack MAC Address MAC address IP Address IP address Subnet Mask Subnet mask Default Gateway The IP address of the default gateway DNS Server (P) The IP address of the primary DNS server DNS Server (S) The IP address of the secondary DNS server vTuner ID The ID of the Internet radio (vTuner) 1 2 Set “DHCP” to “Off”. Use the cursor keys (q/w) to select a parameter type. IP Address Specifies an IP address. Subnet Mask Specifies a subnet mask. Default Gateway Specifies the IP address of the default gateway. DNS Server (P) Specifies the IP address of the primary DNS server. DNS Server (S) Specifies the IP address of the secondary DNS server. 3 Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value. 4 To exit from the menu, press SETUP. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 81 ■ MAC Address Filter ■ Network Standby Sets the MAC address filter to limit access to the unit from other network devices. Selects whether the unit can be turned on from other network devices (network standby). ❑ Filter Settings Enables/disables the MAC address filter. Off (default) Disables the network standby function. On Enables the network standby function. (The unit consumes more power than when “Off” is selected.) Settings Off (default) Disables the MAC address filter. On Enables the MAC address filter. In “MAC Address 1–10”, specify the MAC addresses of the network devices that will be permitted access to the unit. ❑ MAC Address 1–10 Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to the unit when “Filter” is set to “On”. 3 Edits the network name (the unit’s name on the network) displayed on other network devices. ■ Procedure 1 2 ■ Procedure 1 2 ■ Network Name Use the cursor keys (q/w) to select an MAC address number (1 to 10). Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value. Press ENTER to enter the name edit screen. Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a character. Network Name To exit from the menu, press SETUP. Y a m a h a x x x x x x ■ DMC Control Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback. Settings Disable Does not allow DMCs to control playback. Enable (default) Allows DMCs to control playback. Back:RETURN 3 4 To confirm the new name, press ENTER. To exit from the menu, press SETUP. • A Digital Media Controller (DMC) is a device that can control other network devices through the network. When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media Player 12) on the same network. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 82 ■ Network Update Updates the firmware via the network. Language Select an on-screen menu language. ❑ Perform Update Starts the process to update the unit’s firmware. For details, see “Updating the unit’s firmware via the network” (p.89). Setup Speaker English HDMI 日本語 Français Deutsch Español Русский Italiano ❑ Firmware Version Sound Displays the version of the firmware installed on the unit. Network ECO Function Language 中文 ❑ System ID Displays the system ID number. Settings English (default) English 日本語 Japanese Français French Deutsch German Español Spanish Russian Italiano Italian Chinese • Japanese and Chinese characters used in content information (such as song titles) cannot be displayed. • The information on the front display is provided in English only. CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 83 Selecting the remote control ID (REMOTE ID) Configuring the system settings (ADVANCED SETUP menu) REMOTEIDID1 Configure the system settings of the unit while viewing the front display. 1 2 Change the unit’s remote control ID so that it matches the remote control’s ID (default: ID1). When using multiple Yamaha AV receivers, you can set each remote control with a unique remote control ID for its corresponding receiver. Set the unit to standby mode. While holding down STRAIGHT on the front panel, press z (power). Settings ID1 (default), ID2 z (power) ■ Changing the remote control ID of the remote control 1 PROGRAM 3 4 5 STRAIGHT To select ID1, while holding down the cursor key (e), hold down SCENE (BD/DVD) for more than 3 seconds. To select ID2, while holding down the cursor key (e), hold down SCENE (TV) for more than 3 seconds. Press PROGRAM to select an item. • The registered remote control codes (p.86) are not cleared even if you change the remote control ID. Press STRAIGHT to select a setting. Switching the video signal type (TV FORMAT) Press z (power) to set the unit to standby mode and turn it on again. The new settings take effect. TVFORMATPAL ADVANCED SETUP menu items Switch the video signal type of HDMI output so that it matches to the format of your TV. Item Function REMOTE ID Selects the unit’s remote control ID. Page 84 TV FORMAT Switches the video signal type of HDMI output. 84 INIT Restores the default settings. 85 UPDATE Updates the firmware. 85 VERSION Checks the version of firmware currently installed on the unit. 85 Since the unit automatically selects the video signal type so that it matches to the TV, it is unnecessary to change the setting normally. Change the setting only when images on the TV screen do not appear correctly. Settings NTSC, PAL (default) CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu) En 84 Restoring the default settings (INIT) INITCANCEL Restores the default settings for the unit. Choices ALL Restores the default settings for the unit. CANCEL Does not perform an initialization. Checking the firmware version (VERSION) VERSIONxx.xx Check the version of firmware currently installed on the unit. • You can also check the firmware version in “Network Update” (p.83) in the “Setup” menu. • It may take a while until the firmware version is displayed. Updating the firmware (UPDATE) UPDATEUSB New firmware that provides additional features or product improvements will be released as needed. Updates can be downloaded from our website. If the unit is connected to the Internet, you can download the firmware via the network. For details, refer to the information supplied with updates. ■ Firmware update procedure Do not perform this procedure unless firmware update is necessary. Also, make sure you read the information supplied with updates before updating the firmware. 1 Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to start firmware update. Choices USB Update the firmware using a USB memory device. NETWORK Update the firmware via the network. • If the unit detects newer firmware over the network, the envelope icon (p) will appear in the “Network Update” screen. In this case, you can also update the unit’s firmware by following the procedure in “Updating the unit’s firmware via the network” (p.89). CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu) En 85 CODE SET SOURCE RECEIVER CODE SET You can use the unit’s remote control to operate external devices (such as BD/DVD players) if you have registered the remote control code of the external device. HDMI 1 2 3 4 MHL 1 2 3 5 AV 4 5 6 V-AUX USB NET TUNER DAB INFO MEMORY MOVIE MUSIC PRESET TUNING SUR. DECODE STRAIGHT ENHANCER DIRECT NET • If the unit’s remote control is without batteries for more than 2 minutes, the registered codes may be cleared. If this happens, insert new batteries and register the codes again. If it blinks six times, registration has failed. Repeat from Step 2. ■ TV operations RADIO • Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all the input selection keys. With this setting, you can control HDMI Control-compatible devices connected to the unit with the remote control. (This function may not work depending on the specification of the external device.) OPTION SETUP VOLUME ENTER RETURN Use the numeric keys to enter the 4-digit remote control code. Once the remote control code is successfully registered, SOURCE/RECEIVER blinks twice. SCENE TV Press TV z. • Ensure that the remote control ID of the external device is set to “ID1”. If any other ID is selected, the remote control operations may not work properly. SLEEP BD DVD 3 4 • You cannot control an external device that does not have a remote control sensor. AUDIO FM Controlling external devices with the remote control SOURCE/RECEIVER Once you have registered the remote control code for your TV, you can control it using the TV operation keys, regardless of the input source selected on the unit. DISPLAY TOP MENU POP-UP MENU MUTE Registering the remote control code for a TV MODE 1 2 3 4 5 6 7 8 9 0 10 You can use the unit’s remote control to operate a TV if you have registered its remote control code. Numeric keys TV operation keys INPUT Switches the video inputs of the TV. MUTE Mutes the audio output of the TV. TV VOL Adjust the volume of the TV. TV CH Switch the channels of the TV TV z Turns on/off the TV. ENT TV INPUT TV VOL MUTE TV CH TV operation keys TV z • You can also register your TV’s remote control code to the unit’s input selection keys (p.87). This would allow you to use the cursor keys or numeric keys to operate the TV (this function may not be available on some TV models). 1 Use “Remote Control Code Search” in the CD-ROM to find your TV’s remote control code. • If there are multiple remote control codes, register the first code in the list. If that does not work, try the other codes. 2 Press CODE SET using a pointed object such as the tip of a ballpoint pen. SOURCE/RECEIVER blinks twice. Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 2. CONFIGURATIONS ➤ Controlling external devices with the remote control En 86 CODE SET SOURCE RECEIVER SOURCE z CODE SET SOURCE/RECEIVER Registering the remote control codes for playback devices HDMI 1 2 3 1 2 3 4 MHL Input selection keys 5 AV 4 5 6 V-AUX USB NET AUDIO You can use the unit’s remote control to operate playback devices if you have registered their remote control codes. You can also use the input selection keys to change the playback devices that are controlled by the remote control, because their remote control codes are assigned to the input selection keys. TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET TUNING • If you assign the remote control code for an external device to the star (★ or ★★) key, you can operate the device with the remote control without switching the input source after pressing the star key. SUR. DECODE STRAIGHT ENHANCER DIRECT SLEEP SCENE BD DVD TV NET 1 RADIO OPTION SETUP VOLUME ENTER RETURN Menu operation keys Use “Remote Control Code Search” in the CD-ROM to find the remote control code for your playback device. POP-UP MENU Once you have registered the remote control code for your playback device, you can control it using the following keys after selecting the input source or scene. • By pressing SOURCE/RECEIVER, you can switch the devices (the unit or external device) that are operated by the menu operation keys, DISPLAY and numeric keys. You can operate the unit when SOURCE/RECEIVER lights up in orange, and an external device when SOURCE/RECEIVER lights up in green. For example, if you register the remote control code of your BD/DVD player on HDMI 1, you can operate the unit when SOURCE/RECEIVER lights up in orange, and the BD/DVD player when SOURCE/RECEIVER lights up in green. SOURCE z Menu operation keys • If there are multiple remote control codes, register the first code in the list. If that does not work, try the other codes. MUTE 1 2 3 4 External device operation keys DISPLAY 5 6 7 8 Numeric keys 9 0 10 2 Press CODE SET using a pointed object such as the tip of a ballpoint pen. SOURCE/RECEIVER blinks twice. ENT Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 2. TV TV operation keys TV VOL Select an item. ENTER Confirms a selected item. RETURN MODE INPUT Turns on/off the playback device. Cursor keys DISPLAY DISPLAY D TOP MENU ■ Playback device operations TV CH MUTE 3 4 External device operation keys TOP MENU Displays the top menu. POP-UP MENU Displays the pop-up menu. s Stops playback. d Stops playback temporarily. a Starts playback of the selected song/video. h j Press the input selection key. f For example, press HDMI 1 to set the remote control code for the playback device connected to the HDMI 1 jack. g Use the numeric keys to enter the 4-digit remote control code. Once the remote control code is registered successfully, SOURCE/RECEIVER blinks twice. If it blinks six times, registration has failed. Repeat from Step 2. Returns to the previous screen. Switches information on the display. Searches forward/backward (by holding down). Skips forward/backward. Numeric keys Enter numerical values. TV operation keys Control the TV (p.86). • These keys work only if the corresponding function is available on your playback device and if the device can be operated with an infrared remote control. • For details on how to register a remote control code to a SCENE key, refer to “Configuring scene assignments” (p.35). CONFIGURATIONS ➤ Controlling external devices with the remote control En 87 CODE SET SOURCE RECEIVER CODE SET SOURCE/RECEIVER HDMI 1 2 3 2 3 4 MHL 1 Input selection keys 5 4 5 6 USB NET You can reset a remote control code registered to each input selection key. 1 AV V-AUX Resetting remote control codes SOURCE/RECEIVER blinks twice. AUDIO TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 1. TUNING SUR. DECODE STRAIGHT ENHANCER DIRECT 2 3 SLEEP SCENE BD DVD TV NET RADIO OPTION SETUP VOLUME ENTER RETURN POP-UP MENU Press the input selection key. Use the numeric keys to enter “5098”. Once the remote control code is reset successfully, SOURCE/RECEIVER blinks twice. DISPLAY TOP MENU Press CODE SET using a pointed object such as the tip of a ballpoint pen. MUTE If it blinks six times, resetting has failed. Repeat from Step 1. MODE To reset the remote control to factory default settings 1 2 3 4 5 6 7 8 9 0 10 ENT a Press CODE SET using a pointed object such as the tip of a ballpoint pen. Numeric keys b Press SOURCE/RECEIVER. c Use the numeric keys to enter “9981”. TV INPUT TV VOL TV CH MUTE CONFIGURATIONS ➤ Controlling external devices with the remote control En 88 Updating the unit’s firmware via the network CODE SET SOURCE RECEIVER New firmware that provides additional features or product improvements will be released as needed. If the unit is connected to the Internet, you can download the firmware via the network and update it. HDMI 1 2 3 4 MHL 1 2 3 5 AV 4 5 6 V-AUX USB NET • To cancel the operation without updating the firmware, press SETUP. 4 Note AUDIO Use the cursor keys to select “Perform Update” and press ENTER. TUNER FM DAB INFO MEMORY MOVIE MUSIC PRESET SUR. DECODE STRAIGHT ENHANCER • If the unit is connected to the wireless network via a wireless network adapter, network update may not be possible depending on the condition of the wireless connection. In this case, update the firmware using the USB memory device (p.85). DIRECT SLEEP SCENE BD DVD TV NET RADIO SETUP OPTION SETUP VOLUME ENTER RETURN DISPLAY TOP MENU POP-UP MENU MUTE MODE 1 2 3 4 5 6 7 8 9 0 10 TV ENT • To perform the following procedure, your TV must be connected to the unit via HDMI. If not, perform the update from the “ADVANCED SETUP” menu (p.85). TV VOL 5 If “UPDATE SUCCESS PLEASE POWER OFF!” appears on the front display, press z (power) on the front panel. The firmware update is complete. Cursor keys ENTER • You can also update the firmware using the USB memory device from the “ADVANCED SETUP” menu (p.85). 1 2 Press SETUP. 3 Use the cursor keys to select “Network Update” and press ENTER. INPUT MUTE The on-screen display turns off and the firmware update starts. • Do not operate the unit or disconnect the power cable or network cable during firmware update. Firmware update takes about 20 minutes or more (depending on your Internet connection speed). TUNING Use the cursor keys to select “Network” and press ENTER. TV CH If new firmware is available, the envelope icon (p) appears in the “Network Update” screen. Network Update p Icon Perform Update Firmware Version System ID x.xx xxxxxxxx Update:ENTER Back:RETURN CONFIGURATIONS ➤ Updating the unit’s firmware via the network En 89 APPENDIX Frequently asked questions The new speaker system does not provide an ideal sound balance... If you have changed speakers or have a new speaker system, use YPAO to optimize the speaker settings again (p.30). If you want to adjust the speaker settings manually, use “Speaker” in the “Setup” menu (p.72). Since we have small children, we want to set limitations on the volume control... If a small child accidentally operates the controls on the main unit or remote control, the volume may suddenly increase. This may also cause injury or damage the unit or speakers. We recommend using “Max Volume” in the “Setup” menu to set the maximum volume level for the unit in advance (p.78). I am occasionally startled by a sudden loud sound when turning on the unit... By default, the volume level when the unit last entered standby mode is automatically applied. If you want to fix the volume, use “Initial Volume” in the “Setup” menu to set the volume to be applied when the receiver is turned on (p.78). We are bothered by volume differences when switching between input sources… system. For information on how HDMI Control works between your TV and playback devices, refer to the instruction manuals for each device. I want to display a device name or a manufacture name on the front display when selecting an input source... By default, input source names (such as “HDMI 1” and “AV 1”) are displayed on the front display when an input source is selected. If you want to rename them as you like, use “Input Rename” (p.79) in the “Setup” menu. You can also select a name from the presets (such as “Blu-ray” and “DVD”). I want to prevent accidental changes to the settings... You can protect the settings configured on the unit (such as speaker settings) by utilizing “Memory Guard” in the “Setup” menu (p.80). The unit’s remote control is simultaneously controlling another Yamaha product as well as the unit... When using multiple Yamaha products, the remote control may work on another Yamaha product or another remote control may work on the unit. If this happens, register different remote control IDs for the devices that you want to control with each remote control (p.84). You can correct volume differences between input sources by utilizing “Input Trim” in the “Option” menu (p.67). I want to enjoy videos/audio played back on the video device even when the unit is in standby mode… I made HDMI connections but HDMI Control does not work at all... If you have connected a video device to the unit with HDMI, you can output videos/audio played back on the video device to the TV even when the unit is in standby mode. To use this function, set “Standby Through” (p.75) in the “Setup” menu to “On”. You can also switch the input source using the remote control of the unit when this function is enabled. To use HDMI Control, you need to perform the HDMI Control link setup (p.101). After connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit, enable HDMI Control on each device and perform the HDMI Control link setup. This setup is required every time you add a new HDMI Control-compatible device to your APPENDIX ➤ Frequently asked questions En 90 Troubleshooting Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. First, check the following: a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely. b The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on. c The connectors of each cable are securely inserted in to jacks on each device. Power, system and remote control Problem Cause Remedy The power does not turn on. The protection circuitry has been activated three times consecutively. If the unit is in this condition, the standby indicator on the unit blinks when you try to turn on the power. As a safety precaution, capability to turn on the power is disabled. Contact your nearest Yamaha dealer or service center to request repair. The power does not turn off. The internal microcomputer has frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 10 seconds to initialize and reboot the unit. (If the problem persists, disconnect the power cable from the AC wall outlet and plug it again.) The power turns off (standby mode) immediately. The unit was turned on while a speaker cable was shorted. Twist the bare wires of each speaker cable firmly and reconnect to the unit and speakers (p.15). The sleep timer worked. Turn on the unit and start playback again. The auto-standby function kicked in because the unit was not used for the specified time. To disable the auto-standby function, set “Auto Power Standby” in the “Setup” menu to “Off” (p.78). The protection circuitry has been activated because of a short circuit. Twist the bare wires of each speaker cable firmly and reconnect to the unit and speakers (p.15). The internal microcomputer is frozen, due to an external electric shock (such as lightning or excessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 10 seconds to initialize and reboot the unit. (If the problem persists, disconnect the power cable from the AC wall outlet and plug it again.) The unit enters standby mode automatically. The unit is not reacting. APPENDIX ➤ Troubleshooting En 91 Problem The unit cannot be controlled using the remote control. Cause The unit is out of the operating range. Use the remote control within the operating range (p.4). The batteries are weak. Replace with new batteries. The unit’s remote control sensor is exposed to direct sunlight or strong lighting. Adjust the lighting angle, or reposition the unit. The remote control is set to control external devices. Press SOURCE/RECEIVER to set the remote control to control the unit (the key lights up in orange). The remote control IDs of the unit and the remote control are not identical. Change the remote control ID of the unit or the remote control (p.84). The remote control is set to control the unit. Press SOURCE/RECEIVER to set the remote control to control external devices (the key lights up in green). The corresponding remote control code is not set properly. Set the remote control code again (p.86). Even if the remote control code is registered properly, some products may not respond to the remote control. A remote control code for another playback device is assigned to HDMI 5. Reset the remote control code registered to HDMI 5 (p.88). The mobile device or its application is not externally controllable. Directly operate the mobile device itself. External devices cannot be controlled using the remote control. The MHL-compatible mobile device cannot be controlled using the remote control. Remedy APPENDIX ➤ Troubleshooting En 92 Audio Problem No sound. The volume cannot be increased. Cause Remedy Another input source is selected. Select an appropriate input source with the input selection keys. Signals that the unit cannot reproduce are being input. Some digital audio formats cannot be played back on the unit. To check the audio format of the input signal, use “Signal Info” in the “Option” menu (p.67). The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable. The maximum volume is set. Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.78). A device connected to the output jacks of the unit is not turned on. (This may happen due to the nature of AV receivers.) Turn on all devices connected to the output jacks of the unit. The playback source does not contain a signal for the channel. To check it, use “Signal Info” in the “Option” menu (p.67). The currently selected sound program/decoder does not use the speaker. To check it, use “Test Tone” in the “Setup” menu (p.74). Audio output of the speaker is disabled. Perform YPAO (p.30) or use “Configuration” in the “Setup” menu to change the speaker settings (p.72). The volume of the speaker is set too low. Perform YPAO (p.30) or use “Level” in the “Setup” menu to adjust the speaker volume (p.74). The speaker cable connecting the unit and the speaker is defective. If there is no problem with the connection, replace with another speaker cable. The speaker is malfunctioning. To check it, replace with another speaker. If the problem persists, the unit may be malfunctioning. The playback source does not contain LFE or low-frequency signals. To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the front channel low-frequency components from the subwoofer (p.73). Subwoofer output is disabled. Perform YPAO (p.30) or set “Subwoofer” in the “Setup” menu to “Use” (p.72). The volume of the subwoofer is too low. Adjust the volume on the subwoofer. The subwoofer has been turned off by its auto-standby function. Disable the auto-standby function of the subwoofer or adjust its sensitivity level. The TV does not support HDCP (High-bandwidth Digital Content Protection). Refer to the instruction manuals for the TV and check the TV’s specifications. The unit is set not to output audio input through HDMI jacks from the SPEAKERS terminals. In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.75). The number of devices connected to the HDMI OUT jack exceeds the limit. Disconnect some of the HDMI devices. No sound is coming from a specific speaker. No sound is coming from the subwoofer. No sound from the playback device (connected to the unit with HDMI). APPENDIX ➤ Troubleshooting En 93 Problem No sound from the TV (when HDMI Control is used). Only the front speakers work on multichannel audio. Cause Remedy The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so that the TV audio is output from the speakers connected to the unit. A TV that does not support ARC is connected to the unit only with an HDMI cable. Use a digital optical cable to make an audio connection (p.19). (If the TV is connected to the unit with an audio cable) The TV audio input setting does not match the actual connection. Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack (p.75). (If you are trying to use ARC) ARC is disabled on the unit or TV. Set “ARC” in the “Setup” menu to “On” (p.76). Also, enable ARC on the TV. The playback device is set to output 2-channel audio (such as PCM) only. To check it, use “Signal Info” in the “Option” menu (p.67). If necessary, change the digital audio output setting on the playback device. The unit is too close to another digital or radio frequency device. Move the unit further away from the device. The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable. Noise/hum is heard. The volume of the unit is too high. Turn down the volume. If “ECO Mode” is set to “On”, set it to “Off” (p.79). A device connected to the unit’s output jacks is not turned on. Turn on all devices connected to the unit’s output jacks. Cause Remedy Another input source is selected on the unit. Select an appropriate input source with the input selection keys. The sound is distorted. Video Problem No video. No video from the playback device (connected to the unit with HDMI). Another input source is selected on the TV. Switch the TV input to display the video from the unit. The video signal output from the unit is not supported by the TV. Check the video output setting of the playback device. For information about video signals supported by the TV, refer to the instruction manuals for the TV. The cable connecting the unit and TV (or playback device) is defective. If there is no problem with the connection, replace with another cable. The input video signal (resolution) is not supported by the unit. To check the information about the current video signal (resolution), use “Signal Info” in the “Option” menu (p.67). For information about video signals supported by the unit, see “HDMI signal compatibility” (p.103). The TV does not support HDCP (High-bandwidth Digital Content Protection). Refer to the instruction manuals for the TV and check the TV’s specifications. The number of devices connected to the HDMI OUT jack is over the limit. Disconnect some of the HDMI devices. The TV is not connected to the unit via HDMI. You can display the menu of the unit on the TV only when they are connected with an HDMI cable. If necessary, use an HDMI cable to connect them (p.17 to 20). Another input source is selected on the TV. Switch the TV input to display the video from the unit (HDMI OUT jack). The menu of the unit is not displayed on the TV. APPENDIX ➤ Troubleshooting En 94 DAB radio Problem Cause Remedy No DAB radio reception. An initial scan has not been performed. Perform an initial scan to receive DAB radio (p.42). Reception strength of DAB radio is poor. Check reception strength in “Tune Aid” in the “Option” menu (p.45), and adjust the antenna height or orientation, or place it in a different location. There is no DAB coverage in your area. Check with your dealer or WorldDMB online at “http://www.worlddab.org” for a listing of the DAB coverage in your area. There is multi-path interference. Check reception strength in “Tune Aid” in the “Option” menu (p.45), and adjust the antenna height or orientation, or place it in a different location. Your area is too far from the DAB station transmitter. Use an outdoor antenna. We recommend using a sensitive multi-element antenna. DAB information is not available or is inaccurate. The selected DAB radio station may be temporarily out of service or may not provide information. Contact the DAB broadcaster. No DAB radio sound. The selected DAB radio station may be temporarily out of service. Try the station later or select another station. Cause Remedy No DAB radio reception even after performing an initial scan. DAB radio reception is weak or noisy. FM radio Problem There is multi-path interference. Adjust the antenna height or orientation, or place it in a different location. Press MODE to select monaural FM radio reception (p.46). FM radio reception is weak or noisy. Your area is too far from the FM station transmitter. Use an outdoor antenna. We recommend using a sensitive multi-element antenna. Select the station manually (p.46). FM radio stations cannot be selected automatically. Your area is too far from the FM station transmitter. Use an outdoor antenna. We recommend using a sensitive multi-element antenna. APPENDIX ➤ Troubleshooting En 95 USB and network Problem Cause Remedy The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again. The unit does not detect the USB device. The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format. Folders and files in the USB device cannot be viewed. The data in the USB device is protected by the encryption. Use a USB device without an encryption function. The network feature does not function. The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on your router and set “DHCP” in the “Setup” menu to “On” on the unit (p.81). If you want to configure the network parameters manually, check that you are using an IP address which is not used by other network devices in your network (p.81). The media sharing setting is not correct. Configure the sharing setting and select the unit as a device to which music contents are shared (p.57). Some security software installed on your PC is blocking the access of the unit to your PC. Check the settings of security software installed on your PC. The unit and PC are not in the same network. Check the network connections and your router settings, and then connect the unit and the PC to the same network. The MAC address filter is enabled on the unit. In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or specify the MAC address of your PC to allow it to access to the unit (p.82). The files are not supported by the unit or the media server. Use the file format supported by both the unit and the media server. For information about the file formats supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.57). The selected Internet radio station is currently not available. There may be a network problem at the radio station, or the service may have been stopped. Try the station later or select another station. The selected Internet radio station is currently broadcasting silence. Some Internet radio stations broadcast silence at certain of times of the day. Try the station later or select another station. Access to the network is restricted by the firewall settings of your network devices (such as the router). Check the firewall settings of your network devices. The Internet radio can be played only when it passes through the port designated by each radio station. The port number varies depending on the radio station. The MAC address filter is enabled on the unit. In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or specify the MAC address of your smartphone/tablet to allow it to access to the unit (p.82). The unit and smartphone/tablet are not in the same network. Check the network connections and your router settings, and then connect the unit and smartphone/tablet to the same network. It may not be possible depending on the condition of the network. Update the firmware via the network again or use a USB memory device (p.85). The unit does not detect the PC. The files in the PC cannot be viewed or played back. The Internet radio cannot be played. The application for smartphone/tablet “AV Controller” does not detect the unit. Firmware update via the network is failed. APPENDIX ➤ Troubleshooting En 96 Error indications on the front display Message Cause Remedy Access denied Access to the PC is denied. Configure the sharing settings and select the unit as a device to which music contents are shared (p.57). The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. The unit cannot access the iPod. Turn off the iPod and turn it on again. The connected iPod is not supported by the unit. Use an iPod supported by the unit (p.50). Access error Make sure your router and modem are turned on. There is a problem with the signal path from the network to the unit. Check the connection between the unit and your router (or hub) (p.27). Check SP Wires The speaker cables short circuit. Twist the bare wires of the cables firmly and connect to the unit and speakers properly. Internal Error An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center. MHL Overloaded An overcurrent is flowing through the MHL-compatible mobile device. Turn off the unit and check the connection between the unit and mobile device. No content There are no playable files in the selected folder. Select a folder that contains files supported by the unit. The unit cannot detect the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device. No device The unit cannot detect the iPod. Turn off the iPod and then turn it on again. Please wait The unit is preparing for connecting to the network. Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn it on again. RemID Mismatch The remote control IDs of the unit and the remote control are not identical. Change the remote control ID of the unit or the remote control (p.84). The unit cannot play back the songs stored on the iPod for some reason. Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be defective. The unit cannot play back the songs stored on the PC for some reason. Check if the format of files you are trying to play is supported by the unit. For information about the formats supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.57). If the unit supports the file format, but still cannot play back any files, the network may be overloaded with heavy traffic. Firmware update is failed. Update the firmware again. Unable to play Version error APPENDIX ➤ Error indications on the front display En 97 Glossary Audio information DTS-HD High Resolution Audio ■ Audio decoding format DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that supports 7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully compatible with the existing multichannel audio systems that support DTS Digital Surround. This technology is used for audio on BD (Blu-ray discs). Dolby Digital DTS-HD Master Audio Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD discs. DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This technology is used for audio on BD (Blu-ray discs). Dolby Digital Plus Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports 7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing multichannel audio systems that support Dolby Digital. This technology is used for audio on BD (Blu-ray discs). DTS Neo:6 Dolby Pro Logic II DTS Neo:6 enables 6-channel playback from 2-channel sources. There are two modes available: “Music mode” for music sources and “Cinema mode” for movie sources. This technology provides discrete full-bandwidth matrix channels of surround sound. Dolby Pro Logic II enables 5-channel playback from 2-channel sources. There are three modes available: “Music mode” for music sources, “Movie mode” for movie sources, and “Game mode” for game sources. DSD (Direct Stream Digital) Dolby TrueHD Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to offer a high-definition home theater experience with the quality of the studio master. Dolby TrueHD can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This technology is used for audio on BD (Blu-ray discs). DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as SACD (Super Audio CDs). The signals are stored at a high-frequency sampling rate of 2.8224 MHz. The highest frequency response is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This technology offers better audio quality than that used for CDs. FLAC DTS 96/24 FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed audio formats in compression rate but provides higher audio quality. DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit audio. This format remains fully compatible with the existing multichannel audio systems that support DTS Digital Surround. This technology is used for music DVDs, etc. MP3 DTS Digital Surround One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this compression method achieves a high compression rate. Reportedly, it is capable of compressing data quantity by about 1/10 maintaining a certain level of audio quality. DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports 5.1-channel audio. This technology is used for audio on most DVD discs. MPEG-4 AAC DTS-ES An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio streaming services on Internet because it allows a high compression rate of data while maintaining better audio quality than MP3. DTS-ES creates total 6.1-channel audio from 5.1-channel sources that are recorded with DTS-ES. This decoder adds a surround back sound to the original 5.1-channel sound. In the DTS-ES Matrix 6.1 format, a surround back sound is recorded in the surround channels, and in the DTS-ES Discrete 6.1 format, a discrete surround back channel is recorded. DTS Express PCM (Pulse Code Modulation) PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted. This technology is the basis of all other audio format. This technology is used as a lossless audio format called Linear PCM for audio on a variety of media, including CDs and BD (Blu-ray discs). DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a higher compression rate than the DTS Digital Surround format developed by DTS, Inc. This technology is developed for audio streaming services on the Internet and secondary audio on BD (Blu-ray discs). APPENDIX ➤ Glossary En 98 Sampling frequency/Quantization bit Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”. • Sampling frequency Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate. When the sampling frequency is higher, the range of frequencies that can be played back are wider. • Quantization bit The number of quantization bits indicate the degree of accuracy when converting the sound level into a numeric value. When the number of quantized bits is higher, the expression of the sound level is more accurate. WAV Windows standard audio file format, which defines the method of recording the digital data obtained by converting audio signals. By default, the PCM method (no compression) is used, but you can also use other compression methods. WMA (Windows Media Audio) One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic technologies, this compression method achieves a high compression rate. Reportedly, it is capable of compressing data quantity by about 1/20 maintaining a certain level of audio quality. ■ Others LFE (Low Frequency Effects) 0.1 channel This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to 120 Hz. This channel is added to the channels for all bands with Dolby Digital or DTS to enhance low frequency audio effects. This channel is labeled 0.1 because it is limited to only low frequency audio. Lip sync Video output sometimes lags behind audio output due to the complexity of signal processing caused by an increase in video signal capacity. Lip sync is a technique for automatically correcting the timing lag between audio and video output. HDMI and video information Component video signal With the component video signal system, the video signal is separated into the Y signal for luminance and the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. Composite video signal With the composite video signal system, color, brightness, and synchronization data signals are combined and transmitted with a single cable. Deep Color Deep Color is a technology that HDMI specification supports. Deep Color increases the number of available colors within the boundaries defined by the RGB or YCbCr color space. Conventional color systems process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits. This technology allows HDTVs and other displays to increase from millions of colors to billions of colors and eliminate on-screen color banding for smooth tonal transitions and subtle gradations between colors. HDMI HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/video signal transmission. This interface transmits both digital audio and digital video signals using a single cable without any loss. HDMI complies with HDCP (High-bandwidth Digital Content Protection) and provides a secure audio/video interface. For further information on HDMI, visit the HDMI website at “http://www.hdmi.org/”. MHL MHL (Mobile High-definition Link) is the interface standard for high-speed digital video signal transmission that is developed for mobile devices. This interface transmits both digital audio and digital video signals from mobile devices (such as smartphones) using a single cable with any loss. As with HDMI, MHL complies with HDCP (High-bandwidth Digital Content Protection). x.v.Color “x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color space than sRGB and allows the expression of colors that were not hitherto possible. While remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid, natural images. APPENDIX ➤ Glossary En 99 Yamaha technologies CINEMA DSP (Digital Sound Field Processor) Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions (such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are differences in the sound that you hear. Based on a wealth of actually measured data, CINEMA DSP, Yamaha’s original DSP technology provides the audiovisual experience of a movie theater in your own home. CINEMA DSP 3D The actually measured sound field data contain the information of the height of the sound images. CINEMA DSP 3D mode achieves the reproduction of the accurate height of the sound images so that it creates the accurate and intensive 3D sound fields in a listening room. Compressed Music Enhancer The Compressed Music Enhancer feature compensates for missing harmonics in compression music formats (such as MP3). As a result, this technology provides improved performance for the overall sound system. SILENT CINEMA Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound program, so that accurate representations of all the sound programs can be enjoyed on headphones. Virtual CINEMA DSP Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround speakers with front left and right speakers. Even if the surround speakers are not connected, the unit creates the realistic sound field in a listening room. Virtual Presence Speaker (VPS) Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field without front presence speakers. Even if the front presence speakers are not connected, the unit creates the 3D sound field in your room. APPENDIX ➤ Glossary En 100 Video signal flow Information on HDMI Video signals input from a video device to the unit are output to a TV as shown below. Video device The unit TV HDMI Control HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations. You can also control playback devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with an HDMI cable. For details on connections, see “Connecting a TV” (p.17) and “Connecting video devices (such as BD/DVD players)” (p.22). Operations available from the TV’s remote control HDMI in HDMI • Standby synchronization HDMI out HDMI HDMI HDMI • Volume control including mute • Switching to input audio from the TV when the TV input is switched to its built-in tuner • Switching to input video/audio from the selected playback device • Switching between audio output devices (the unit or TV speaker) (Example) HDMI Control HDMI Control COMPONENT VIDEO in COMPONENT VIDEO COMPONENT VIDEO COMPONENT VIDEO out COMPONENT VIDEO COMPONENT VIDEO PR PR PR PR PB PB PB PB Y Y Y Y Playback device also turns off The unit turns off (standby) Turn off the TV Operations available from the unit’s remote control • Starting playback on the playback device and turning on the TV with a scene selection (p.35) VIDEO VIDEO in VIDEO out VIDEO VIDEO • Switching the TV input to display the “Setup” menu (when SETUP is pressed) VIDEO • Controlling the playback device (playback and menu operations) without registering remote control codes (p.87) APPENDIX ➤ Information on HDMI En 101 (Example) 7 HDMI Control HDMI Control Turns on and displays video from the playback device Playback starts Press SCENE (BD/DVD) To use HDMI Control, you need to perform the following HDMI Control link setup after connecting the TV and playback devices. Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control. • If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in Step 3. It may solve the problem. Also, HDMI Control may not work if the number of connected devices exceeds the limit. In this case, disable HDMI Control on the devices not in use. • If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on the TV. • We recommend using TV and playback devices from the same manufacturer so that HDMI Control works more effectively. • This setup is required every time you add a new HDMI Control-compatible device to your system. 1 2 Turn on the unit, TV, and playback devices. Enable HDMI Control on the unit, TV, and playback devices (such as HDMI Control-compatible BD/DVD players). To enable HDMI Control on the unit, set “HDMI Control” (p.75) in the “Setup” menu to “On” and configure the related items (“TV Audio Input”, “Standby Sync”, “ARC”, and “SCENE”). 3 Turn off the main power of the TV and then turn off the unit and playback devices. 4 5 6 Turn on the unit and playback devices and then turn on the TV. Switch the TV input to display the video from the unit. Check the followings. On the unit: The input to which the playback device is connected is selected. If not, select the input source manually. On the TV: The video from the playback device is displayed. APPENDIX ➤ Information on HDMI En 102 HDMI signal compatibility Audio signals Audio signal type Audio signal format Compatible media (example) 2ch Linear PCM 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio Multichannel Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit DVD-Audio, BD (Blu-ray disc), HD DVD DSD 2 to 5.1ch, 2.8224 MHz, 1 bit SACD Bitstream Dolby Digital, DTS DVD-Video Bitstream (High definition audio) Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio, DTS-HD BD (Blu-ray disc), HD DVD High Resolution Audio, DTS Express Video signals The unit is compatible with the video signals of the following resolutions: • VGA • 720p/60 Hz, 50 Hz • 480i/60 Hz • 1080i/60 Hz, 50 Hz • 576i/50 Hz • 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz • 480p/60 Hz • 4K/30 Hz, 25 Hz, 24 Hz • 576p/50 Hz • When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending on the type of the DVD player. • The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction manual for each device. • To decode audio bitstream signals on the unit, set the input source device appropriately so that the device outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device). For details, refer to the instruction manual for the playback device. APPENDIX ➤ Information on HDMI En 103 Reference diagram (rear panel) HDMI 1 HDMI OUT HDMI 2 HDMI 3 HDMI 4 HDMI 5 MHL 5V 1A (BD/DVD) NETWORK (NET) ARC DC OUT 5V 0.5A ANTENNA (RADIO) COMPONENT VIDEO DAB/FM 75 PR PR PB SPEAKERS PB FRONT Y COMPONENT VIDEO CENTER SURROUND Y VIDEO MONITOR OUT OPTICAL COAXIAL COAXIAL OPTICAL AV 1 AV 2 AV 3 AV 4 ( TV ) AV 5 AV 6 AV OUT AUDIO SUBWOOFER PRE OUT • The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections. APPENDIX ➤ Reference diagram (rear panel) En 104 Trademarks Android™ Android is a trademark of Google Inc. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. This receiver supports network connections. The unit supports DAB/DAB+ tuning. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. MHL and the MHL logo are a trademark, registered trademark or service mark of MHL, LLC in the United States and/or other countries. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. x.v.Color™ “x.v.Color” is a trademark of Sony Corporation. “SILENT CINEMA” is a trademark of Yamaha Corporation. AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. DLNA™ and DLNA CERTIFIED™ are trademarks or registered trademarks of Digital Living Network Alliance. All rights reserved. Unauthorized use is strictly prohibited. Windows™ MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Internet Explorer, Windows Media Audio and Windows Media Player are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. APPENDIX ➤ Trademarks En 105 Specifications Input jacks HDMI • Analog Audio • HDMI features: Deep Color, “x.v.Color,” Auto Lip Sync, ARC Audio x 4 (AV 5–6, AUDIO, V-AUX [Mini Jack]) • Digital Audio (Supported frequencies: 32 kHz to 96 kHz) (Audio Return Channel), 3D, 4K • Video Format (Repeater Mode) Optical x 2 (AV 1, AV 4) - VGA Coaxial x 2 (AV 2–3) - 480i/60 Hz • Video - 576i/50 Hz Composite x 5 (AV 3–6, V-AUX) - 480p/60 Hz Component x 2 (AV 1–2) - 576p/50 Hz • HDMI Input HDMI x 5 (HDMI 1–5*) * HDMI 5: MHL input compatible • Other jacks USB x 1 (USB2.0) NETWORK x 1 (100Base-TX/10Base-T) • Audio Format - PCM 2-ch to 8-ch (Max. 192 kHz/24-bit) • Current Supply Capacity: 1.0 A TUNER • Analog Tuner [Australia model] DAB/FM x 1 (TUNER) [U.K. and Europe models] DAB/FM with Radio Data System x 1 (TUNER) - 720p/60 Hz, 50 Hz - 1080i/60 Hz, 50 Hz USB - 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz • Capable of iPod, Mass Storage Class USB Memory - 4K/30 Hz, 25 Hz, 24 Hz • Audio Format • Current Supply Capacity: 2.1 A - Dolby TrueHD Network - Dolby Digital Plus • PC Client Function Output jacks - Dolby Digital • Compatible with DLNA ver. 1.5 • Analog Audio - DTS-HD Master Audio - Speaker Out x 5 (FRONT L/R, CENTER, SURROUND L/R) - DTS-HD High Resolution Audio - Subwoofer Out x 1 - DTS Express - AV OUT x 1 - DTS - Headphone x 1 - DSD 2-ch to 6-ch • Video - PCM 2-ch to 8-ch (Max. 192 kHz/24-bit) • AirPlay supported • Internet Radio Compatible Decoding Formats • Decoding Format - Dolby TrueHD, Dolby Digital Plus MONITOR OUT • Content Protection: HDCP compatible - Dolby Digital - Component x 1 • Link Function: CEC supported - DTS-HD Master Audio, DTS-HD High Resolution Audio, MHL - DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1 • Video Format (Repeater Mode) - DTS Digital Surround - Composite x 1 AV OUT - Composite x 1 • HDMI Output HDMI OUT x 1 - VGA - 480i/60 Hz - 576i/50 Hz Other jacks - 480p/60 Hz • YPAO MIC x 1 - 576p/50 Hz • DC OUT x 1 DTS Express • Post Decoding Format - Dolby Pro Logic - Dolby Pro Logic II Music, Dolby Pro Logic II Movie, Dolby Pro Logic II Game - DTS Neo:6 Music, DTS Neo:6 Cinema - 720p/60 Hz, 50 Hz - 1080i/60 Hz, 50 Hz - 1080p/30 Hz, 25 Hz, 24 Hz APPENDIX ➤ Specifications En 106 Audio Section • Rated Output Power (2-channel driven) (20 Hz to 20 kHz, 0.09% THD, 6 ) Front L/R .................................................................80 W+80 W • Tone Control Characteristics Bass Boost/Cut............................. ±6 dB/0.5 dB Step at 50 Hz Bass Turnover ............................................................... 350 Hz Treble Boost/Cut..........................±6 dB/0.5 dB Step at 20 kHz Treble Turnover..............................................................3.5 kHz • Rated Output Power (1-channel driven) (1 kHz, 0.9% THD, 6 ) Front L/R .................................................................... 115 W/ch Center ....................................................................... 115 W/ch Surround L/R.............................................................. 115 W/ch • Dynamic Power (IHF) Front L/R (6/4/2 ) ............................................ 110/130/160 W • Damping Factor Front L/R, 20 Hz to 20 kHz, 8 ............................. 120 or more • Input Sensitivity / Input Impedance AV 5 etc. (1 kHz, 100 W/8 )..............................200 mV/47 k • Maximum Input Signal AV 5 etc. (1 kHz, 0.5% THD, Effect On) ........................... 2.3 V • Output Level / Output Impedance AV OUT ..............................................................200 mV/1.2 k SUBWOOFER ...........................................................1 V/1.2 k • Headphone Jack Rated Output / Impedance AV 5 etc. (1 kHz, 50 mV, 8 ) .............................100 mV/470  • Frequency Response AV 5 etc. to Front (10 Hz to 100 kHz) ......................... +0/-3 dB • Signal to Noise Ratio (IHF-A Network) AV 5 etc. (Input Shorted 250 mV, Speaker Out) ..........................................................................100 dB or more • Residual Noise (IHF-A Network) Front L/R (Speaker Out)......................................150 µV or less • Channel Separation AV 5 etc. (Input 5.1 k Shorted, 1 kHz/10 kHz) ................................................................. 60 dB/45 dB or more • Volume Control Range ............................................. MUTE, -80 dB to +16.5 dB Step ................................................................................ 0.5 dB • Filter Characteristics • Antenna Input................................................ 75  unbalanced General • Power Supply [Australia model]............................................. AC 240 V, 50 Hz [U.K. and Europe models] .............................. AC 230 V, 50 Hz (fc=40/60/80/90/100/110/120/160/200 Hz) • Power Consumption........................................................ 280 W H.P.F. (Front, Center, Surround)................................ 12 dB/oct. • Standby Power Consumption L.P.F. (Subwoofer)..................................................... 24 dB/oct. Video Section • Video Signal Type............................................................... PAL • Video Signal Level Composite ............................................................. 1 Vp-p/75  Component Y ......................................................................... 1 Vp-p/75  Pb/Pr................................................................ 0.7 Vp-p/75  HDMI Control Off, Standby Through Off .............. 0.1 W or less HDMI Control On, Standby Through On (No Signals) .......................................................................... 1.0 W (Typical) Network Standby On......................................... 2.0 W (Typical) • Dimensions (W x H x D) ......................435 x 161 x 315 mm (17-1/8” x 6-3/8” x 12-3/8”) * Including legs and protrusions • Weight ............................................................. 8.1 kg (17.9 lbs) • Video Maximum Input Level ...........................1.5 Vp-p or more • Video Signal to Noise Ratio ................................ 50 dB or more * Specifications are subject to change without notice. • Monitor Out Frequency Response Component............................................ 5 Hz to 60 MHz, -3 dB DAB Section • Tuning Range .................................. 174 to 240 MHz (Band III) • Support Audio Format ......................... MPEG 1 Layer II/MPEG 4 HE AAC v2 (AAC+) • Antenna ......................................................... 75  unbalanced FM Section • Tuning Range .......................................... 87.50 to 108.00 MHz • 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.) Mono .................................................................3 µV (20.8 dBf) • Signal to Noise Ratio (IHF) Mono ............................................................................... 71 dB Stereo .............................................................................. 69 dB • Harmonic Distortion (IHF, 1 kHz) Mono .................................................................................0.3% Stereo ................................................................................0.5% APPENDIX ➤ Specifications En 107 Index Symbols ★/★★ keys 10 Envelope icon (p) 89 Lock icon (o) 80 Automatic speaker setting optimization 30 Automatic station preset (FM radio) 47 AutoPowerStdby (ECO, Setup menu) 78 AV OUT jack 9 Configuration (Speaker, Setup menu) 72 Crossover (Speaker, Setup menu) 73 Crossover frequency setting 73 Crossover frequency setting (subwoofer) 30 Numerics B D 2.1-channel system 13 2ch Stereo (sound program) 38 3.1-channel system 13 4.1-channel system 13 4K signal (video signal resolution) 5.1-channel system 13, 14 5ch Stereo (sound program) 38 B RATE (Signal Info, Option menu) 67 Banana plug 15 Basic playback operation 34 Bass (Tone Control, Option menu) 66 Bitrate (Signal Info, Option menu) 67 Bitstream 103 DAB (Digital Audio Broadcasting) 42 DAB information 44 DAB radio listening 42 DAB radio tuning 42 DAB/FM antenna connection 26 DAB+ 42 Date And Time (DAB) 44 DC OUT (Function, Setup menu) 80 DC OUT jack 9 Decoder Off (front display information) 64 Default Gateway (Information, Setup menu) 81 Default Gateway (IP Address, Setup menu) 81 DHCP (IP Address, Setup menu) 81 Digital Audio Broadcasting 42 Digital coaxial cable 16 Digital Media Controller (DMC) 82 Digital optical cable 16 Dimension (DSP Parameter, Setup menu) 77 Dimmer (Function, Setup menu) 80 DIRECT (sound mode) 40 Direct playback 40 Direct Stream Digital (DSD) 98 Distance (Speaker, Setup menu) 74 DLNA 57 DLS (Dynamic Label Segment) (DAB) 44 DMC (Digital Media Controller) 82 DMC Control (Network, Setup menu) 82 DNS Server (Information, Setup menu) 81 DNS Server (IP Address, Setup menu) 81 Dolby Pro Logic (surround decoder) 40 Dolby Pro Logic II Game (surround decoder) 40 Dolby Pro Logic II Movie (surround decoder) 40 103 A A.DRC (DSP/Surround, Option menu) 66 Access denied (error indication) 97 Access error (error indication) 97 Action Game (sound program) 37 Adaptive DRC (DSP/Surround, Option menu) 66 Adjustment (Lipsync, Setup menu) 77 ADVANCED SETUP menu 84 Adventure (sound program) 37 AirPlay 62 Amp (Audio Output, Setup menu) 75 ARC (Audio Return Channel) 17 ARC (HDMI, Setup menu) 76 Audio Decoder (front display information) 64 Audio device connection 25 Audio file format (PC/NAS) 57 Audio file format (USB storage device) 54 Audio In (Option menu) 68 AUDIO jack 16 Audio Mode (DAB) 44 Audio Output (HDMI, Setup menu) 75 Audio Return Channel (ARC) 17 Auto Power Standby (ECO, Setup menu) 78 Auto Preset (FM radio, Option menu) 47 C CAT-5 cable 27 Cellar Club (sound program) 38 Center (Speaker, Setup menu) 72 Center Image (DSP Parameter, Setup menu) 77 Center Width (DSP Parameter, Setup menu) 77 CH Label/Freq. (DAB) 44 Chamber (sound program) 38 CHAN (Signal Info, Option menu) 67 Channel (Signal Info, Option menu) 67 Check SP Wires (error indication) 97 CINEMA DSP 37 CINEMA DSP 3D 39 CINEMA DSP 3D Mode (DSP Parameter, Setup menu) 76 Clear Preset (DAB radio, Option menu) 44 Clear Preset (FM radio, Option menu) 48 Clock Time (Radio Data System) 49 COAXIAL jack 16 Component video cable 16 Component video connection (video device) 23 COMPONENT VIDEO jack 16 Composite video connection (video device) 23 Compressed Music Enhancer 41 Configuration (HDMI, Setup menu) 75 APPENDIX ➤ Index En 108 Front panel (part names and functions) Front panel jack connection 25 Function (Setup menu) 79 Dolby Pro Logic II Music (surround decoder) 40 Drama (sound program) 37 DSD (Direct Stream Digital) 98 DSP Level (DSP/Surround, Option menu) 66 DSP Parameter (Sound, Setup menu) 76 DSP Program (front display information) 64 DSP/Surround (Option menu) 66 DTS Neo:6 Cinema (surround decoder) 40 DTS Neo:6 Music (surround decoder) 40 Dynamic Range (Volume, Setup menu) 78 G GEQ (Equalizer, Setup menu) 74 H Hall in Munich (sound program) 38 Hall in Vienna (sound program) 38 HDMI (Setup menu) 75 HDMI cable 16 HDMI connection (video device) 22 HDMI Control (HDMI, Setup menu) 75 HDMI jack 16 HDMI OUT (TV) (Audio Output, Setup menu) HDMI signal compatibility 103 Headphones 41 High definition audio 103 High speed HDMI cable 16 E ECO (Setup menu) 78 ECO Mode (Setup menu) 79 Enhancer (DSP/Surround, Option menu) 66 ENHANCER (sound mode) 41 Ensemble Label (DAB) 44 EQ Select (Equalizer, Setup menu) 74 Equalizer (Speaker, Setup menu) 74 Error indication (front display) 97 External device control (remote control) 86 External device operation key (remote control) Extra Bass (Speaker, Setup menu) 73 I 10 F Filter (MAC Address Filter, Setup menu) 82 Firmware update 85 Firmware update (network) 85, 89 Firmware update (USB) 85 Firmware Version (Network Update, Setup menu) Firmware version check 85 FM antenna connection 26 FM radio listening 46 FM radio tuning 46 FORMAT (Signal Info, Option menu) 67 Format (Signal Info, Option menu) 67 Frequency (FM radio) 46 Front (Speaker, Setup menu) 72 Front display (part names and functions) 8 Front display brightness 80 Front display information 64 IP Address (Network, Setup menu) 81 iPod charge 50 iPod connection 50 iPod content playback 51 iPod content playback (AirPlay) 62 iTunes content playback (AirPlay) 62 7 83 In.Trim (Volume Trim, Option menu) 67 Indicator (part names and functions) 8 INFO key 7, 10 Information (Network, Setup menu) 81 Information display (front display) 8 Information switching (front display) 64 INIT (ADVANCED SETUP menu) 85 Init Scan (DAB radio, Option menu) 42 Initial Volume (Volume, Setup menu) 78 Input (front display information) 64 Input (Signal Info, Option menu) 67 Input Rename (Function, Setup menu) 79 Input selection key (remote control) 10 Input Trim (Volume Trim, Option menu) 67 Interlock (Option menu) 68 Internal Err. (YPAO error message) 32 Internal Error (error indication) 97 Internet radio listening 60 IP Address (Information, Setup menu) 81 L 75 Language (Setup menu) 83 Level (Speaker, Setup menu) 74 Level Error (YPAO warning message) LFE (Low Frequency Effects) 99 Lipsync 99 Lipsync (Option menu) 67 Lipsync (Sound, Setup menu) 77 Low Frequency Effects (LFE) 99 33 M MAC Address (Information, Setup menu) 81 MAC Address (MAC Address Filter, Setup menu) MAC Address Filter (Network, Setup menu) 82 Manual station preset (FM radio) 47 Max Volume (Volume, Setup menu) 78 Media sharing setup 57 Memory Guard (Function, Setup menu) 80 Menu language selection 29 Menu operation key (remote control) 10 MHL cable 16 MHL connection 22 MHL jack 16 MHL Overloaded (error indication) 97 MHL-compatible mobile device 22 MODE key 10 Monaural reception (FM radio) 46 Mono Movie (sound program) 37 MOVIE (sound program category) 37 MUSIC (sound program category) 38 Music Video (sound program) 38 MUTE key 10 Muting 34 APPENDIX ➤ Index 82 En 109 N NAS (Network Attached Storage) 27 NAS connection 27 NAS content playback 57 Network (Setup menu) 81 Network Attached Storage (NAS) 27 Network cable 27 Network connection 27 Network information 81 Network Name (Network, Setup menu) 82 Network Standby (Network, Setup menu) 82 Network Update (Network, Setup menu) 83 No content (error indication) 97 No device (error indication) 97 No Front SP (YPAO error message) 32 No MIC (YPAO error message) 32 No Signal (YPAO error message) 32 No Sur. SP (YPAO error message) 32 Noisy (YPAO error message) 32 NTSC (TV FORMAT, ADVANCED SETUP menu) Numeric key (remote control) 10 Please wait (error indication) 97 Power cable connection 28 Power management 78 Power Mode (DC OUT, Setup menu) 80 Preset station selection (DAB radio) 43 Preset station selection (FM radio) 48 Program Service (Radio Data System) 49 Program Type (DAB) 44 Program Type (Radio Data System) 49 R 84 O OPTICAL jack 16 OPTION key 10 Option menu 65 Out of Phase (YPAO warning message) 33 Output (Signal Info, Option menu) 67 Over Distance (YPAO warning message) 33 P PAL (TV FORMAT, ADVANCED SETUP menu) 84 Panorama (DSP Parameter, Setup menu) 76 PC connection 27 PC content playback 57 PEQ (Equalizer, Setup menu) 74 Perform Update (Network Update, Setup menu) 83 PHONES jack 7 Playback device connection 22 Playback device operation (remote control) 87 Radio Data System (FM radio) 49 Radio Data System information 49 Radio Data System tuning 49 Radio Text (Radio Data System) 49 Rear panel (part names and functions) 9 Recording device connection 28 RemID Mismatch (error indication) 97 Remote control (part names and functions) 10 Remote control code registration (playback device) 87 Remote control code registration (TV) 86 Remote Control Code Search 86, 87 Remote control ID setting 84 Remote control ID setting (remote control) 84 Remote control sensor 7 Remote control signal transmitter (remote control) REMOTE ID (ADVANCED SETUP menu) 84 Rename (input name) 79 Rename (network name) 82 Repeat (iPod, Option menu) 53 Repeat (PC/NAS, Option menu) 59 Repeat (USB storage device, Option menu) 56 Reset (remote control) 88 Roleplaying Game (sound program) 37 Router connection 27 S SAMPL (Signal Info, Option menu) 67 Sampling (Signal Info, Option menu) 67 SCENE (HDMI, Setup menu) 76 10 Scene configuration 35 SCENE function 35 SCENE link playback 35 Sci-Fi (sound program) 37 Select (Lipsync, Setup menu) 77 Service Label (DAB) 44 SETUP key 10 Setup menu 69 Shuffle (iPod, Option menu) 53 Shuffle (PC/NAS. Option menu) 59 Shuffle (USB storage device, Option menu) Signal Info (Option menu) 67 Signal information 67 Signal Quality (DAB) 44 SILENT CINEMA 41 Simple play (iPod) 52 SLEEP key 10 Sleep timer 10 Sound (Setup menu) 76 Sound field effect 37 Sound mode selection 36 Sound program 37 Speaker (Setup menu) 72 Speaker cable connection 15 Speaker connection 14 Speaker indicator (front display) 8 Speaker placement 12 Spectacle (sound program) 37 Sports (sound program) 37 Standard (sound program) 37 Standby indicator (front panel) 7 Standby Sync (HDMI, Setup menu) 76 Standby Through (HDMI, Setup menu) 75 Station preset (DAB radio) 43 Station preset (FM radio) 47 Status (Information, Setup menu) 81 Stereo mini jack 16 Stereo mini-plug cable 16 Stereo pin cable (RCA cable) 16 Stereo reception (FM radio) 46 APPENDIX 56 ➤ Index En 110 STP network cable 27 STRAIGHT (sound mode) 39 Straight decode 39 Subnet Mask (Information, Setup menu) 81 Subnet Mask (IP Address, Setup menu) 81 Subwoofer (Speaker, Setup menu) 72 Subwoofer connection 15 Subwoofer Phase (Speaker, Setup menu) 73 Subwoofer Trim (Volume Trim, Option menu) 67 SUR.DECODE (sound mode) 40 Surround (Speaker, Setup menu) 72 Surround decoder 40 SW.Trim (Volume Trim, Option menu) 67 System ID (Network Update, Setup menu) 83 T Test Tone (Speaker, Setup menu) 74 The Bottom Line (sound program) 38 The Roxy Theatre (sound program) 38 Tone Control (Option menu) 66 TONE CONTROL key 7 Treble (Tone Control, Option menu) 66 Tune Aid (DAB radio, Option menu) 45 TV Audio Input (HDMI, Setup menu) 75 TV connection 17 TV connection (ARC-compatible TV) 17 TV connection (HDMI Control-compatible TV) 19 TV connection (TV with HDMI input jacks) 20 TV connection (TV without HDMI input jacks) 21 TV FORMAT (ADVANCED SETUP menu) 84 TV operation (remote control) 86 TV operation key (remote control) 10 V V IN (Signal Info, Option menu) 67 V OUT (Signal Info, Option menu) 67 VERSION (ADVANCED SETUP menu) 85 VIDEO AUX jack 7 Video device connection 22 VIDEO jack 16 Video Out (Option menu) 68 Video pin cable 16 Video signal flow 101 Video signal type setting 84 Video/audio input jack combination 24 Virtual CINEMA DSP 39 Virtual Presence Speaker (VPS) 6 Volume (Sound, Setup menu) 78 Volume Interlock (Option menu) 68 Volume Trim (Option menu) 67 VPS (Virtual Presence Speaker) 6 vTuner ID (Information, Setup menu) 81 Y Yamaha Parametric room Acoustic Optimizer (YPAO) 30 YPAO (Yamaha Parametric room Acoustic Optimizer) YPAO error message 32 YPAO MIC jack 7 YPAO microphone 30 YPAO warning message 33 30 U Unable to play (error indication) 97 UPDATE (ADVANCED SETUP menu) 85 USB jack 7 USB mass storage class device 54 USB storage device connection 54 USB storage device content playback 54 User Cancel (YPAO error message) 32 APPENDIX ➤ Index En 111 © 2013 Yamaha Corporation YF215A0/EN
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112

Yamaha RX-V500DOwner de handleiding

Categorie
Auto media-ontvangers
Type
de handleiding
Deze handleiding is ook geschikt voor