921551-552 G20NE 5
ENGLISH
Before starting up, please read this manual carefully in order to ensure the correct and safe installation and
usage. Damage caused by not following the instructions of this manual will always invalidates the warranty.
Mach would like to emphasize that this instruction manual needs to be readed carefully before usuge and
should be stored for later use.
TECNICAL SPECIFICATIONS:
MODEL LIT. DIMENSIONS (CM) VOLTAGE (V) HERTZ (HZ) POWER (W)
921.551 4,5 29,0(H) x 26,3 x 29,0 220-240 V 50 Hz 250
921.552 2 x 4,5 29,0(H) x 50,3 x 29,0 220-240 V 50 Hz 500
For more information we would like to ask you to go to our website www.emga.com.
You could for example search on item nr. and go to downloads.
Here, you will be able to find more information like the exploded views and the spare part lists.
TYPE PLATE
The type plate (the picture is an example) is located on the back of the device.
You are requested not to remove it. The type plate can for example be used to
determine, when the item was purchased (view PO) and from which production
line (view SN) it originates. This information may be essential with regard to
warranty. It also contains important information such as the voltage and power
supply which determines the ability to connect the device safe.
TRANSPORT AND STORAGE:
INDOOR
USE ONLY
As long as the products are packed, please make sure you never place them upside down.
This could damage the appliance. During transport, the product should be placed carefully.
Make sure you prevent any drastic vibration during transport. You should never place or store
this product outside or in open air for a longer period of time than a few hours
(not even packed). It should be stored in a well-ventilated warehouse without corrosive
gasses. When, in case of an emergency, you need to store them temporarily outside, you should take
measures to protect them from rain or moisture.
SAFETY PRECAUTIONS AND USAGE ENVIRONMENT:
1. Remove all packaging material and any protective film from the device.
2. This product should be placed in a balanced and well ventilated spot and its left and right sides should
be free from obstacles for more than 10cm. It’s back-side should be free from the obstacles (like a wall
etc.) for more than 20cm.
3. During operation, do not place any stuff in front of the appliance to make sure it could be operated at
any time needed.
4. Do not place the appliance on a carpet, a tea towel, tablecloth (vinyl) or another surface that cannot
withstand high temperatures. This could cause fire hazard.
5. Do never cover the appliance with foil; this could cause overheating and therefore danger.
6. Never plug the power cord into an extension cord or wall outlet to which multiple devices are
connected.
7. Never put the plug in the socket with wet hands.
8. When disconnecting the device from the power, never pull from the cord, only the plug.
9. The power pressure of this equipment should conform to the supply voltage of this product.
10. The user should install the suitable power switch, fuse and leakage-protector near to the equipment.
11. Before usage, this equipment must be connected (safe) to a grounded socket.
12. Before starting up, you should check whether the socket you want to use is grounded.