TOOLS for n Version2 Update Guide
1
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE.
YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREE-
MENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION
(“YAMAHA”).
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE
BOUND BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL,
COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO
NOT AGREE TO THE TERMS, PROMPTLY DELETE THE SOFTWARE.
1. GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use one copy of the soft-
ware program(s) and data (“SOFTWARE”) accompanying this
Agreement. The term SOFTWARE shall encompass any updates
to the accompanying software and data. The SOFTWARE is
owned by Yamaha and/or Yamaha’s licensor(s), and is protected
by relevant copyright laws and all applicable treaty provisions.
While you are entitled to claim ownership of the data created
with the use of SOFTWARE, the SOFTWARE will continue to
be protected under relevant copyrights.
• Yo u m a y use the SOFTWARE on a single computer
• Yo u m a y make one copy of the SOFTWARE in machineread-
able form for backup purposes only, if the SOFTWARE is on
media where such backup copy is permitted. On the backup
copy, you must reproduce Yamaha’s copyright notice and any
other proprietary legends that were on the original copy of the
SOFTWARE.
• Yo u m a y permanently transfer to a third party all your rights
in the SOFTWARE, provided that you do not retain any copies
and the recipient reads and agrees to the terms of this
Agreement.
2. RESTRICTIONS
• You may not engage in reverse engineering, disassembly,
decompilation or otherwise deriving a source code form of the
SOFTWARE by any method whatsoever.
• You may not reproduce, modify, change, rent, lease, or dis-
tribute the SOFTWARE in whole or in part, or create deriva-
tive works of the SOFTWARE.
• You may not electronically transmit the SOFTWARE from
one computer to another or share the SOFTWARE in a net-
work with other computers.
• You may not use the SOFTWARE to distribute illegal data or
data that violates public policy.
• You may not initiate services based on the use of the SOFT-
WARE without permission by Yamaha Corporation.
• Copyrighted data, including but not limited to MIDI data for
songs, obtained by means of the SOFTWARE, are subject to
the following restrictions which you must observe.
• Data received by means of the SOFTWARE may not be used
for any commercial purposes without permission of the copy-
right owner.
• Data received by means of the SOFTWARE may not be dupli-
cated, transferred, or distributed, or played back or performed
for listeners in public without permission of the copyright
owner.
• The encryption of data received by means of the SOFTWARE
may not be removed nor may the electronic watermark be
modified without permission of the copyright owner.
3. TERMINATION
This Agreement becomes effective on the day that you receive
the SOFTWARE and remains effective until terminated. If any
copyright law or provisions of this Agreement is violated, the
Agreement shall terminate automatically and immediately with-
out notice from Yamaha. Upon such termination, you must
immediately destroy the licensed SOFTWARE, any accompany-
ing written documents and all copies thereof.
4. DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFT-
WARE is at your sole risk. The SOFTWARE and related docu-
mentation are provided “AS IS” and without warranty of any
kind. NOTWITHSTANDING ANY OTHER PROVISION OF
THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS
ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS,
AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY, FIT-
NESS FOR A PARTICULAR PURPOSE AND NONIN-
FRINGEMENT OF THIRD PARTY RIGHTS.
SPECIFICALLY,
BUT WITHOUT LIMITING THE FOREGOING,
YAMAHA
DOES NOT WARRANT THAT THE SOFTWARE WILL
MEET YOUR REQUIREMENTS, THAT THE OPERATION
OF THE SOFTWARE WILL BE UNINTERRUPTED OR
ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE
WILL BE CORRECTED.
SOFTWARE LICENSE AGREEMENT
TOOLS for n Version2
Update Guide
TOOLS for n Version2 Update Guide
2
5. LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL
BE TO PERMIT USE OF THE SOFTWARE UNDER THE
TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIA-
BLE TO YOU OR ANY OTHER PERSON FOR ANY DAM-
AGES, INCLUDING, WITHOUT LIMITATION, ANY
DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR
OTHER DAMAGES ARISING OUT OF THE USE, MISUSE
OR INABILITY TO USE THE SOFTWARE, EVEN IF
YAMAHA OR AN AUTHORIZED DEALER HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In
no event shall Yamaha’s total liability to you for all damages,
losses and causes of action (whether in contract, tort or other-
wise) exceed the amount paid for the SOFTWARE.
6. THIRD PARTY SOFTWARE
Third party software and data (“THIRD PARTY SOFTWARE”)
may be attached to the SOFTWARE. If, in the written materials
or the electronic data accompanying the Software, Yamaha iden-
tifies any software and data as THIRD PARTY SOFTWARE,
you acknowledge and agree that you must abide by the provi-
sions of any Agreement provided with the THIRD PARTY
SOFTWARE and that the party providing the THIRD PARTY
SOFTWARE is responsible for any warranty or liability related
to or arising from the THIRD PARTY SOFTWARE. Yamaha is
not responsible in any way for the THIRD PARTY SOFTWARE
or your use thereof.
• Yamaha provides no express warranties as to the THIRD
PARTY SOFTWARE. IN ADDITION, YAMAHA
EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, as to the THIRD PARTY
SOFTWARE.
•
Yamaha shall not provide you with any service or maintenance
as to the THIRD PARTY SOFTWARE.
• Yamaha is not liable to you or any other person for any dam-
ages, including, without limitation, any direct, indirect, inci-
dental or consequential damages, expenses, lost profits, lost
data or other damages arising out of the use, misuse or inabil-
ity to use the THIRD PARTY SOFTWARE.
7. GENERAL
This Agreement shall be interpreted according to and governed
by Japanese law without reference to principles of conflict of
laws. Any dispute or procedure shall be heard before the Tokyo
District Court in Japan. If for any reason a court of competent
jurisdiction finds any portion of this Agreement to be unenforce-
able, the remainder of this Agreement shall continue in full force
and effect.
8. COMPLETE AGREEMENT
This Agreement constitutes the entire agreement between the
parties with respect to use of the SOFTWARE and any accompa-
nying written materials and supersedes all prior or contempora-
neous understandings or agreements, written or oral, regarding
the subject matter of this Agreement. No amendment or revision
of this Agreement will be binding unless in writing and signed
by a fully authorized representative of Yamaha.
• The software and this Update Guide are the exclusive copyrights of Yamaha Corporation.
• Please read carefully the Software Licensing Agreement at the front of this Update Guide before installing the software.
• Copying of the software or reproduction of this Update Guide in whole or in part by any means is expressly forbidden without the writ-
ten consent of the manufacturer.
• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsi-
ble for the results of the use of this Update Guide and the software.
• Future upgrades of application and system software and any changes in specifications and functions will be announced at the following
website.
http://download.yamaha.com/
• The screen displays as illustrated in this Update Guide are for instructional purposes, and may appear somewhat different from the
screens which appear on your computer.
• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited
except for your personal use.
• Steinberg and Cubase are the registered trademarks of Steinberg Media Technologies GmbH.
• Windows is the registered trademark of Microsoft ® Corporation.
• FireWire and the FireWire symbol are trademarks of Apple, Inc., registered in the U.S. and other countries.
• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
•
The company names and product names in this Update Guide are the trademarks or registered trademarks of their respective companies.
Information
TOOLS for n Version2 Update Guide
3
TOOLS for n Version2 consists of two software components: Yamaha Steinberg FW Driver and n Extension. Yamaha Steinberg
FW Driver enables audio/MIDI signals to be transferred between a computer and the n8/n12 via IEEE1394 cables. Using n Exten-
sion, you can link the n8/n12 with Cubase versions that support the Link functions between both of them. The TOOLS for n
Version2 Installer installs these two software components.
Main Changes from TOOLS for n
• The driver included in this software has been changed from AI Driver to Yamaha Steinberg FW Driver.
• The structure of the installer for Extensions has been changed. This new version installs only Extension for n while the previous
version (Yamaha Extensions for Steinberg DAW) installed Extension for the multiple different models such as n and MOTIF XS
together. (For Windows, make sure to uninstall Extensions installed via the previous version before installing TOOLS for n
Version2.)
Features of Yamaha Steinberg FW Driver
• Unlike the previous version, you need not to perform the on/off setting for the driver (Windows) or Connection Manager (for
Mac), resulting in smoother and quicker use.
• You can change the sample rate directly from DAW software such as Cubase.
• Basically, up to three devices compatible with the Yamaha Steinberg FW Driver can be connected in daisy-chain fashion to a
computer. However, please note, that only up to two devices can be connected if their Sampling Rates are set to 88.2kHz/96kHz
or if you use the MOTIF XS/XF series and MOTIF-RACK XS.
TOOLS for n Version2 requires the following software components.
n8/n12 firmware V1.03 or later
IEEE1394 firmware V1.07 or later
Sweet Spot Data Manager V2.0.0 or later
For details on Cubase versions that support the Link functions, refer to the release notes.
This Update Guide covers also the information about the instructions on updating these software components.
When installing TOOLS for n Version2 for the first time, download the following software components and relevant manuals from
Yamaha website before starting the update procedure.
n8/n12 firmware Updater V1.03 or later
IEEE1394 firmware Updater V1.07 or later
Sweet Spot Data Manager V2.0.0 or later
TOOLS for n Version2/Cubase AI Installation Guide
n8/n12 Owner’s Manual (Supporting TOOLS for n Version2)
http://download.yamaha.com/
NOTE
• If the included CD-ROM is “TOOLS for n Version2,” you do not need to update the n8/n12 Firmware and the IEEE1394 Firmware. (The n8/
n12 will already have been updated to the required version of the firmware when you install TOOLS for n Version2.)
• The install and uninstall procedures for Windows 7/Windows 8 are the same as Windows Vista.
• Follow the steps below to access the Control Panel on Windows 8.
1) In the Start screen, click [Desktop].
The desktop will appear.
2) Move the cursor to the upper right or lower right corner of the desktop.
The Charms bar will appear.
3) Select [Settings]
[Control Panel].
What is TOOLS for n Version2?
Important
After updating the n8/n12 firmware, the n8/n12 will not be able to be used with the n Driver, AI Driver or mLAN
Driver/mLAN Tools. Also keep in mind that the previous firmware version of the n8/n12 cannot be restored.
TOOLS for n Version2 Update Guide
4
When you are using the TOOLS for n Version2
Follow the instructions below.
NOTE
• If the old version of the TOOLS for n Version2 has been installed on your computer, the software should be updated with the same procedure.
• If you don’t have the TOOLS for n Version2/Cubase AI Installation Guide, you can download the corresponding PDF file from the Yam ah a
website.
Windows
The installation procedure of TOOLS for n Version2 is same as that described in the Installation Guide of “TOOLS for n Version2/
Cubase AI”. For installation instructions, refer to the TOOLS for n Version2/Cubase AI Installation Guide. When performing
installation, make sure to double-click “setup.exe” in the compressed file you obtained by downloading instead of the file having
the same name in the CD-ROM.
Mac
[1] Install TOOLS for n Version2
[2] Turn on the power to the n8/n12
[3] Confirm whether or not installation is completed successfully
[1] Install TOOLS for n Version2
1 Make sure that the power to the n8/n12 is turned off.
2 Using an IEEE1394 (FireWire) cable, connect the n8/n12 directly to the computer (without using a hub),
and disconnect all other IEEE1394 devices from the computer.
3 Start the computer and log in to the Administrator account.
Exit any open applications and close all open windows.
4 After the downloaded compressed file is properly extracted, double-click the file “TOOLS for n V***.pkg.”
*** represents the version number.
5 Follow the on-screen instructions to install the software.
6 When installation has been completed, click [Restart] to restart the computer.
[2] Turn on the power to the n8/n12
[3] Confirm whether or not installation is completed successfully
1 Open the “Audio MIDI Setup” window as follows.
[Macintosh HD] [Applications] [Utilities] [Audio MIDI Setup]
2 Confirm that the device name is listed in the following.
Mac OS X 10.5:
In “Properties For:”
Mac OS X 10.6/10.7/10.8:
In the left column
Software Installation
TOOLS for n Version2 Update Guide
5
When installing TOOLS for n Version2 for the first time
Follow the instructions below.
Windows
[1] Uninstall n Driver, AI Driver or mLAN Driver/mLAN Tools and Extensions for Steinberg DAW (32-bit version only)
[2] Install TOOLS for n Version2
[3] Connect the n8/n12 to the computer, then turn on the power to the device
[4] Update IEEE1394 firmware
[5] Update n8/n12 firmware
[6] Make the initial setup for the n series Driver and WDM Audio/MIDI Driver. (Windows XP only)
[7] Confirm whether or not installation is completed successfully
[8] Update Sweet Spot Data Manager
[1] Uninstall n Driver, AI Driver or mLAN Driver/mLAN Tools and Extensions for
Steinberg DAW (32-bit version only)
If these software are installed to your computer, follow the instructions below to uninstall them. If they are necessary for data com-
munication with the devices other than the n8/n12, you can maintain the mLAN Driver/mLAN Tools in your computer.
NOTE
Please note the following points if you maintain the mLAN Driver/mLAN Tools in the computer
• If you are using mLAN Driver/mLAN Tools V1.6.2, update them to V1.6.3 (or higher) before installing TOOLS for n Version2. This is neces-
sary because the Yamaha Steinberg FW Driver cannot work properly with the mLAN Driver/mLAN Tools V1.6.2 installed.
• When using Yamaha Steinberg FW Driver, make sure to disable the mLAN Driver. If this is enabled (on), Yamaha Steinberg FW Driver cannot
work because the mLAN Driver uses the IEEE1394 interface. When using the mLAN Driver, make sure to turn off any devices compatible with
Yamaha Steinberg FW Driver or disconnect them from the computer before enabling the mLAN driver. Note that you may not need to disable
the mLAN driver when the computer is equipped with multiple IEEE1394 interfaces and a device compatible with Yamaha Steinberg FW
driver is connected to the different IEEE1394 interface from the other used by the mLAN driver.
Uninstalling n Driver, AI Driver or mLAN Driver/mLAN Tools
1 Extract the file you downloaded, open the “Uninstall_mLAN” folder, then double-click the “setup.exe” file.
The maintenance window appears.
NOTE
• If you are using Windows Vista, the “User Account Control” window may appear. Click [Continue]. The maintenance window
will appear.
• The “Cannot find the installer” window appears if the n Driver, AI Driver or mLAN Driver/mLAN Tools are not installed to the
computer.
TOOLS for n Version2 Update Guide
6
2 Make sure that the radio button to the left of “Remove” is selected, then click [Next].
3 A message “Remove (A name of software installed)” appears. Click [Next].
4 The “Welcome...” window appears. Check the radio button to the left of “Remove,” then click [Next].
5 Confirmation regarding removal of the file appears. Click [OK].
The maintenance operation starts.
6 The window appears indicating that the maintenance operation is complete. Click [Finish].
7 The message “Remove mLAN Tools 2.0” appears. click [Next].
8 Confirmation regarding removal of the file appears. Click [OK].
The maintenance operation starts.
9 A window appears indicating that the maintenance operation is complete. Click [Finish].
10 A dialog box indicating that “Software removal has been completed” appears. Click [OK].
The uninstallation of n Driver, AI Driver or mLAN Driver/mLAN Tools is complete.
NOTE
• You can also uninstall the software by using “Add or Remove Programs” or “Programs and Features” in the Windows Control
Panel. In the same manner as described below for removing Extensions for Steinberg DAW, remove the following two software
programs in the listed order.
(Be sure to remove software 1, then software 2.)
1) Yamaha n Driver, Yamaha AI Driver or mLANApplications for Yamaha
2) mLAN Tools 2.0
TOOLS for n Version2 Update Guide
7
Uninstalling Extensions for Steinberg DAW
Windows XP:
1 From the Start menu, select ([Settings] ) [ControlPanel] [Add or Remove Programs] to display the Add
or Remove Programs panel.
2 Click “Change or Remove Programs” located in the upper left, then select “Yamaha Extensions for
Steinberg DAW” from the list in the right pane.
3 To uninstall the software, click [Remove].
A dialog box appears. Follow the instructions to remove the software.
Windows Vista:
1
From the Start menu, select ([Settings]
) [ControlPanel]
[Programs and Features] to display the “Uninstall
or change a program” window.
2 Select “Extensions for Steinberg DAW” from the list.
3 Click [Uninstall].
If the “User Account Control” window appears, click [Continue]. A dialog box appears. Follow the instructions to
remove the software.
[2] Install TOOLS for n Version2
For details, refer to the TOOLS for n Version2/Cubase AI Installation Guide. The installation procedure is the same as that appli-
cable when installing this software by using the “TOOLS for n Version2” CD-ROM. When you start installation, make sure to
double-click “setup.exe” in the compressed file (you have downloaded) instead of the CD-ROM.
NOTE
• On Windows XP, executing this procedure will take you up to step 15 (page 7) in the TOOLS for n Version2/Cubase AI Installation Guide.
After completing the procedure, continue the update steps following step [3] “Connect the n8/n12 to the computer, then turn on the power to the
device” in this Update Guide.
[3] Connect the n8/n12 to the computer, then turn on the power to the device
NOTE
• If you connect the n8/n12 to the computer with Windows XP for the first time, the “Found New Hardware Wizard” window appears. Select the
radio button next to “Install the software automatically [Recommended],” then click [Next]. When the message of the installation completion is
displayed, click [Finish].
• A dialog box may appear asking you whether you wish to connect to Windows Update. In this case, select the radio button to the left of “Not at
this time,” then click [Next].
[4] Update IEEE1394 firmware
For details, refer to the Update Guide included in the IEEE1394 Firmware Updater.
[5] Update n8/n12 firmware
For details, refer to the Update Guide included in the n8/n12 Firmware Updater.
TOOLS for n Version2 Update Guide
8
[6] Make the initial setup for the n series Driver and WDM Audio/MIDI Driver.
(Windows XP only)
The “Found New Hardware Wizard” windows appear when the update of the n8/n12 firmware has been completed. Complete each
of the Wizards by following the instructions after No.16 in the TOOLS for n Version2/Cubase AI Installation Guide (page 7).
NOTE
• If the installation wizard window appears, select the radio button next to “Install the software automatically [Recommended],” then click
[Next]. When the message of the installation completion is displayed, click [Finish].
• A dialog box may appear asking you whether you wish to connect to Windows Update. In this case, select the radio button to the left of “Not at
this time,” then click [Next].
• If you are using Windows Vista, the initial settings are automatically done.
[7] Confirm whether or not installation is completed successfully
For details, refer to the TOOLS for n Version2/Cubase AI Installation Guide.
[8] Update Sweet Spot Data Manager
For details, refer to the Installation Guide included in the Sweet Spot Data Manager.
Mac
[1] Install TOOLS for n Version2
[2] Turn on the power to the n8/n12
[3] Update IEEE1394 firmware
[4] Update n8/n12 firmware
[5] Confirm whether or not installation is completed successfully
[6] Update Sweet Spot Data Manager
[1] Install TOOLS for n Version2
For details, refer to the section “ [1] Install TOOLS for n Version2 ” (page4).
[2] Turn on the power to the n8/n12
[3] Update IEEE1394 firmware
For details, refer to the Update Guide included in the IEEE1394 Firmware Updater.
[4] Update n8/n12 firmware
For details, refer to the Update Guide included in the n8/n12 Firmware Updater.
[5] Confirm whether or not installation is completed successfully
For details, refer to the section “ [3] Confirm whether or not installation is completed successfully” (page4).
TOOLS for n Version2 Update Guide
9
[6] Update Sweet Spot Data Manager
For details, refer to the Installation Guide included in the Sweet Spot Data Manager.
NOTE
• If you do not use AI Driver or mLAN Driver/mLAN Tools in other devices, you can uninstall it by the following methods.
To uninstall AI Driver or mLAN Driver/mLAN Tools, you must remove the following folders and files from the boot disk (usually Macintosh
HD).
/Applications/mLAN Tools/
/System/Library/Extensions/Yamaha1394AudioDriver.kext
/System/Library/Extensions/YamahaOGTAsync.kext
/System/Library/Frameworks/mLANEnablerFramework.framework
/System/Library/Frameworks/mLANQt.framework or mLANQtFramework.framework
/Library/Application Support/mLAN/
/Library/Audio/MIDI Drivers/Yamaha1394MIDI.plugin
/Library/Prefrences/com.yamaha.mLAN Manager.plist
/Library/Receipts/01XHAL.pkg
/Library/Receipts/1394AudioDriver.pkg
/Library/Receipts/1394MIDIPlugIn.pkg
/Library/Receipts/i88XHAL.pkg
/Library/Receipts/NCP08HAL.pkg
/Library/Receipts/mLAN16EHAL.pkg
/Library/Receipts/mLANAsyncLibrary.pkg
/Library/Receipts/mLANAutoConnector.pkg
/Library/Receipts/mLANEnablerFramework.pkg
/Library/Receipts/mLANGraphicPatchbay.pkg
/Library/Receipts/mLANManager.pkg
/Library/Receipts/mLANQt.pkg
/Library/Receipts/MY16mLANHAL.pkg
/Library/Receipts/Presets.pkg
/Library/Receipts/YamahaAIDriverHAL.pkg
/User/ (Account name) /mLAN/
/ User/ (Account name) /Library/Preferences/com.yamaha.autoconnector.plist
/ User/ (Account name) /Library/Preferences/com.yamaha.mLAN.GraphicPatchbay.plist
/ User/ (Account name) /Library/Preferences/com.yamaha.mLAN Manager.plist
* “(Account name)” indicates the account name when AI Driver or mLAN Driver/mLAN Tools is installed.
You must remove the following software one by one.
• Yamaha Steinberg FW Driver
• n Extension
Windows
For details, refer to the TOOLS for n Version2/Cubase AI Installation guide to uninstall the software.
Mac
[1] Disconnect all IEEE1394 devices from the computer.
[2] Start the computer and log in to the Administrator account.
Exit any open applications and close all open windows.
[3] After the downloaded compressed file is properly extracted, double-click the
following files.
Yamaha Steinberg FW Driver
• Uninstall Yamaha Steinberg FW Driver
n Extension
• Uninstall Yamaha n Extension
[4] Click [Run] when the “Welcome to the *** uninstaller.” window appears.
*** represents the software name.
After that, follow the on-screen instructions to uninstall the software.
[5] After completing the uninstallation, an “Uninstallation completed” window
appears.
Click [Restart] or [Close].
[6] (Yamaha Steinberg FW Driver Only)
When the message prompting you to restart your computer appears, click
[Restart].
Uninstalling the Software
C.S.G., Pro Audio Division
© 2009-2012 Yamaha Corporation
212MW-E0
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
in andere talen
- English: Yamaha Version2 User guide
- italiano: Yamaha Version2 Guida utente
- русский: Yamaha Version2 Руководство пользователя
- français: Yamaha Version2 Mode d'emploi
- español: Yamaha Version2 Guía del usuario
- Deutsch: Yamaha Version2 Benutzerhandbuch
- português: Yamaha Version2 Guia de usuario
- dansk: Yamaha Version2 Brugervejledning
- suomi: Yamaha Version2 Käyttöohjeet
- čeština: Yamaha Version2 Uživatelská příručka
- svenska: Yamaha Version2 Användarguide
- Türkçe: Yamaha Version2 Kullanici rehberi
- polski: Yamaha Version2 instrukcja
- română: Yamaha Version2 Manualul utilizatorului