Yamaha HD-300 de handleiding

Merk: Yamaha

Model: HD-300

Type: de handleiding

Deze handleiding is ook geschikt voor

HD-300 Assistant

Owner’s Manual

Ver. 2.00

Introduction

Thank you for using the HD-300 Assistant. This app is equipped with functions

that make using the HD-300 even more convenient and powerful. Please read this

manual carefully and use it together with the main unit.

What you

can do with

this app

Contents

• Use expanded functions: HD control, Rhythm/tempo setting, Individual vol/pitch,

Rhythm assistant

• Help to hear exact intervals using the HD-300: Demonstration (Interference beat,

Volume balance)

• Use convenient functions on the app: Tuner, Chord detection

Basic usage

Individual functions

Setting up

Common

operation

• Downloading and installing the app

• Connecting with the HD-300

• Function selection: From screen menu

• Function selection: Using shortcut icons

• Editing; Select, Change, Delete, Execute/Cancel

Function list (Call up individual function screens)

To contentsBasic usage

Setting up

• Downloading and installing the app

• Connecting with the HD-300

Common operations

• Function selection: From screen menu

• Function selection: Using shortcut icons

• Editing: Select, Change, Delete, Execute/Cancel

To contentsBasic usage: Setting up

Downloading and installing the app

Search for “HD-300 Assistant” in the iPhone/iPad App Store, and install it.

NOTICE

Use this app with iOS/iPad OS version 14.3 or later. For versions prior to 14.2, the app may behave

unexpectedly or stop.

NOTE

At the rst startup, a pop-up will appear asking for permission to use the microphone and Bluetooth. Tap “OK” for

each. If you do not allow this, the app will not work properly.

If you select “Don’t allow” at startup, you can set the permission in “Settings” > “HD Assistant” on the iPhone/iPad,

and the app will work normally.

To contents

Basic usage: Setting up

Connecting with the HD-300 (1/3)

Perform the pairing operation for communication between the iPhone/iPad and the HD-300.

The device uses Bluetooth, but actually connects with a channel separate from the conventional

Bluetooth audio settings in iPhone/iPad, and so must be set from this app.

1. Turn on the Bluetooth function for both the HD-300 and the iPhone/iPad.

1-1. Turn on the HD-300 and press the [SETTING] button to open the Settings

screen.

1-2. Set “Bluetooth” to “On” using the [>] and [-]/[+] buttons.

NOTE

Do not set “Bluetooth” to “Pairing” in this procedure.

1-3. Enable the Bluetooth function on the iPhone/iPad.

For details on how to do this, refer to the iPhone/iPad owner’s manual.

To contents

Connecting with the HD-300 (2/3)

2. Make pairing settings for the app and the main unit to communicate.

2-1. Do one of the following to open the Connection settings screen.

• Launch the “HD-300 Assistant” app.

• If the app is already running, tap

at the top right of the screen.

The devices that can be connected are displayed on the screen.

2-2.

Tap the name including “HD300” on the list to start the connection process.

The connection is complete when the display on the right changes from “Not connected” to “Connected.”

To contents

Connecting with the HD-300 (3/3)

3. Tap “Done” at the top right of the screen to close the settings screen.

The icon on the upper right of the home screen will be colored. In this condition, any operation

executed on the app or the HD-300 will be synchronized.

Troubleshooting connection problems with the HD-300

n The device name is not displayed or is displayed as “Offline.”

• Make sure that the power of the HD-300 is turned on.

• Check that “Bluetooth” is set to “On” on the Settings screen of the HD-300.

• Turn off the power of the HD-300 and then turn it on again.

n Connection fails.

• Turn off the power of the HD-300 and then turn it on again.

• Close the HD-300 Assistant app and restart it.

• Check if the Bluetooth function of iPhone/iPad is enabled.

• Check if Bluetooth communication is permitted in “Settings” > “HD Assistant” on the iPhone / iPad.

To contents

Basic usage: Common operations

Function selection: From screen menu

Starting from the home screen, tap the white button on the screen to move to the desired function.

Home screen

To contents

Basic usage: Common operations

Function selection: Using shortcut icons

Except in some instances, shortcuts are displayed at the top of the screen.

Calls up the Home screen, and is colored when the Home screen is displayed.

Returns to the previous screen.

Calls up the Tuner screen, and is colored when the Tuner screen is displayed.

Calls up the Connection Setting screen, and is colored when connection is enabled.

Calls up the Settings screen, and is colored when the Settings screen is displayed.

Adjusts the main volume of the HD-300

To contentsBasic usage: Common operations

Editing: Select, Change, Delete, Execute/Cancel

This section describes pop-up menu operations, such as selecting, changing, or saving.

Immediately deletes the corresponding item, without conrmation.

Press and hold to

drag and drop

Select by tap

Cancel

Tap the empty gray area to cancel.

Execute

The content is conrmed when you

tap it.

To contentsIndividual functions: Function list

Function list

Tap the image/name of the function to move to the explanation page for each function.

Control

Beat • tempo setting

Chord detector

Individual vol/pitch

Interference beats

Tuner

Rhythm assistant

Chord balance Settings

Home HD control

Demonstrate

To function list To contents

Individual functions: HD control > Control (key, temperament)

Operate the connected HD-300 main unit from the app.

Normal 1

Opens the metronome detailed settings

Metronome operations

Checking the tempo reference note

Check and set tempo and time signature

Start/stop metronome.

Voice selection

Transpose

Temperament selection equal/pure

If you want to use individual temperament, go to the “Individual vol/pitch” function.)

NOTE

If the [Pure] display is green when you select [Pure], the key is locked.

Locking/unlocking cannot be changed from the app. If necessary, operate the main unit directly.

To function list To contents

Individual functions: HD control > Control (key, temperament)

Keyboard

The note touched will be sounded

by the HD-300. It is also used for

key input. You can change the

octave by icking.

On-screen keyboard “Hold” on/off

Turns only the “Hold” setting of the keyboard

on/off from the screen. This is independent

of the HOLD setting of the main unit.

Key display (NOTE)

Unlike the main unit, it does not displays a

chord, and only shows the root key and the

distinction between major (maj)/minor (min).

Operate the connected HD-300 main unit from the app.

Normal 2

To function list To contents

Individual functions: HD control > Control (key, temperament)

Metronome detailed settings

Close the metronome

detailed settings

Tempo

Tempo reference note

Start/stop metronome

Tap

This functions in the same way as

the [TAP] button on the HD-300.

Beat (as a simple metronome)

If you want to use an irregular meter, go to the “Beat • tempo setting”

function.

To function list To contents

Control the Beat • tempo memory function.

You can save multiple sets of M1-M8 and recall them later.

Normal 1

Individual functions: HD control > Beat • tempo setting

Beat division/integration

When you tap this, division (or “split”) plans for the corresponding beat will appear. You can

split the time signature into manageable beats by selecting the desired one and tapping

“OK.” Tap this again to integrate them to the time signature before making the split.

Open the metronome detailed settings

Metronome operations

Checking the tempo reference note

Checking and setting the tempo and time

signature

Starting/stopping the metronome

Edit beats

Changing/adding/

deleting beats.

To function list To contentsIndividual functions: HD control > Beat • tempo setting

Control the Beat • tempo memory function.

You can save multiple sets of M1-M8 and recall them later.

Normal 2

Load memory bank

Loading the M1-M8

settings data saved to the

app as one bank.

Save memory bank

Naming the M1-M8 settings as one

bank, and saving them to the app.

Add/delete beat

Memory select

Selecting the desired M1-M8 setting to be edited.

The content is sent to the main unit in real time.

NOTICE

• The contents of M1 to M8 of the

main unit will be overwritten with

the data on the app side when

you use the load memory bank

function. If necessary, save them

before using this function.

• Save the beat / tempo you have

edited before connecting to the

main unit.

To function list To contents

Metronome detailed settings

Individual functions: HD control > Beat • tempo setting

Close the metronome

detailed settings

Tempo

Tempo reference note

Start/stop metronome

Tap

This functions in the same way as

the [TAP] button on the HD-300.

To function list To contents

Set the individual volume/pitch. The temperament mode of the main unit automatically switches to

“User“ mode. You can choose settings from presets or create your own settings to save and recall.

Normal mode

Individual functions: HD control > Individual vol/pitch

Selecting volume/pitch

Keyboard

The note touched is sounded by the

HD-300. The root name of the current

key is shown on the keyboard in this

screen. The root name of the major key

is shown as in the illustration at left.

Also, the root name of the minor key is

shown as in the illustration below.

Change to edit mode (next page)

Create a new custom setting by copying the current setting.

Preset temperaments

Select from preset

temperaments.

Saved custom

temperaments

Select an edited/saved

temperament.

NOTE

The numbers (volume/pitch) corresponding to each key cannot be

changed in normal mode. They can only be changed in edit mode.

To function list To contents

Even during editing, the values are reected in the main unit in real time.

Edit mode: Editing

Individual functions: HD control > Individual vol/pitch

Selecting volume/pitch

Volume/pitch of

corresponding note

Tap to call up the pop-up window

and change the value.

Setting name

being edited

Allows you to edit this

name before saving.

Call up Save Destination selection (next page)

Saves the settings you are editing.

To function list To contents

Save individual volume/pitch settings. Volume and pitch are saved together as a set.

Edit mode: Save Destination selection

Individual functions: HD control > Individual vol/pitch

List of saved settings

Allows you to rename or delete the setting

by tapping it. You can also overwrite current

setting data.

Setting name being edited

While this is selected and the Save

operation is executed, the current settings

will be saved as new data.

Execute Save operation and return to normal

mode

To function list To contents

Demonstrate minutely out-of-tune sounds (interference beats), using the HD-300.

Individual functions: Demonstrate > Interference beats

Type of interval

Root key

Start/stop sounding

Have the main unit sound according to the

settings made here.

Pitch adjustment dial

Adjusts the pitch difference. The dial

turns green when the pitch is near

to just intonation. You can also reset

this to precise just intonation by

double-tapping.

To function list To contents

Demonstrate the volume balance of chords, using the HD-300 main unit.

Individual functions: Demonstrate > Chord balance

Chord type

Start/stop playing chord

Have the main unit sound according to the settings made here.

Volume adjustment slider

Each slider corresponds to a note

marked in the same color on the

keyboard.

Keyboard

The note touched is sounded by the

HD-300.

To function list To contents

Detect the chord of the input sound using the iPhone/iPad microphone.

Individual functions: Chord detector

Microphone sensitivity

adjustment

Tap to display the level meter and

slider. Adjust the slider so that the

input sound from the microphone

falls within the green range.

Detection start/stop

Refer to constituting notes

Displays the table of the actual

note notation and transposition

notation of the constituent notes,

for the chord of the detection

result that was tapped last.

Call up the tuner

You can call up the tuner while

leaving the detection result.

The operation method is the

same in the tuner screen.

Keyboard

The note touched is sounded by the HD-300.

Chord detection result (candidate)

Displays up to 3 chord detection results.

Tap to have the HD-300 sound the corresponding chord.

To function list To contents

This tuner function uses the microphone of the iPhone/iPad.

Individual functions: Tuner

Microphone sensitivity

adjustment

Tap to display the level meter

and slider. Adjust the slider so

that the input sound from the

microphone falls within the

green range.

Standard pitch

Synchronizes with the standard pitch

setting of the HD-300.

To function list To contents

Edit the rhythm patterns of “Custom 1” – “Custom 8” in the main unit by this function.

You can save the rhythm patterns of “Custom 1” – “Custom 8” and recall them later.

Individual functions: Rhythm assistant

NOTE

Tap the [Load] button and

select a custom rhythm pattern

name before editing a rhythm

pattern.

Tempo / time signature

settings

Setting the tempo value

Setting the tempo / time signature

Metronome volume control

Start/stop of

rhythm pattern

Load rhythm pattern

Load the rhythm pattern of “Custom

1” – “Custom 8.” When editing a

new rhythm pattern, select a custom

rhythm name from the list.

Save rhythm pattern

Save the edited rhythm pattern to the

app. You can also include a memo

or other important information (song

name, etc.)

Setting the preparatory

beat

You can set the preparatory beat

when you want to repeat a rhythm

pattern. If unnecessary, set the

value to zero.

To function list To contents

Edit/start/save a rhythm pattern which you want to conrm after setting the tempo, time signature,

and preparatory beat .

Individual functions: Rhythm assistant

Rhythm score

Edit the rhythm pattern by selecting the tabs and tapping notes/

rests with the corresponding buttons. The currently selected note

or rest is highlighted in orange. The number of notes that can

be entered in one bar is determined automatically according to

the beat setting. Also, when the maximum number of notes is

reached, the next bar is generated automatically. You can edit up

to two bars, but can also play back even one bar.

Tie

Tap this button to connect to the next note by a tie.

Notes/Rests

Select a note or a rest

which you want to input.

Delete

Deletes the currently

selected note or rest.

To function list To contents

Tap to call up the connection setting screen, display of licenses, etc., and the owner’s manual (this

manual). The app version is also displayed here.

Individual functions: Settings

Manual Development Group

Published 03/2021

MW-B0

Yamaha HD-300 de handleiding

Merk: Yamaha

Model: HD-300

Type: de handleiding

Deze handleiding is ook geschikt voor

Download PDF

rapport

in andere talen

English: Yamaha HD-300 Owner's manual
italiano: Yamaha HD-300 Manuale del proprietario
français: Yamaha HD-300 Le manuel du propriétaire
español: Yamaha HD-300 El manual del propietario
Deutsch: Yamaha HD-300 Bedienungsanleitung
português: Yamaha HD-300 Manual do proprietário
dansk: Yamaha HD-300 Brugervejledning
suomi: Yamaha HD-300 Omistajan opas
čeština: Yamaha HD-300 Návod k obsluze
日本語: Yamaha HD-300 取扱説明書
svenska: Yamaha HD-300 Bruksanvisning
Türkçe: Yamaha HD-300 El kitabı
polski: Yamaha HD-300 Instrukcja obsługi
română: Yamaha HD-300 Manualul proprietarului

Yamaha HD-300 de handleiding

Deze handleiding is ook geschikt voor

Yamaha HD-300 de handleiding

in andere talen

Gerelateerde artikelen