Yamaha 50W de handleiding

Categorie
Subwoofers
Type
de handleiding
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
Natural Sound Speaker Package System
Jeu d’enceintes “Son Naturel”
Natural-Sound-Lautsprechersystem
Natural Sound högtalarpaket
Sistema completo di altoparlanti a suono naturale
Paquete del sistema de altavoces con sonido natural
Natural Sound Luidsprekerpakket Systeem
NS-P400
Active Servo
Technology
G A R
2
SUPPLIED ACCESSORIES
After unpacking, check that the following parts are contained.
ACCESSOIRES FOURNIS
Après le déballage, vérifier que les pièces suivantes sont incluses.
MITGELIEFERTE ZUBEHÖRTEILE
Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind.
MEDFÖLJANDE TILLBEHÖR
Kontrollera efter det apparaten packats upp att följande delar finns med.
ACCESSORI IN DOTAZIONE
Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio.
ACCESORIOS INCLUIDOS
Desembale el aparato y verificar que los siguientes accesorios están en la caja.
BIJGELEVERDE ACCESSOIRES
Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
Speaker cords
Câbles d’enceintes
Lautsprecheranschlußkabel
Högtalarledningar
Cavi per gli altoparlanti
Cables de los altavoces
Luidsprekerdraden
Rubber Pads (for SW-P40)
Tampons en caoutchouc (pour SW-P40)
Gummiunterlagen (für SW-P40)
Gummidynor (för SW-P40)
Piedini di gomma (per l’SW-P40)
Forros de caucho (para SW-P40)
Anti-slip rubbers (voor SW-P40)
Velcro strips (for NS-C40)
Bandes velcro (pour NS-C40)
Velcro-Streifen (für NS-C40)
Kardborreremsor (för NS-C40)
Strisce autoadesive (per l’NS-C40)
Cintas Velcro (para NS-C40)
Velcro strips (voor NS-C40)
3
English
Supplied accessories.......................................2
Profile of This System .....................................3
Caution ............................................................4
Setting up the speakers ...................................5
Connections ....................................................8
Using the subwoofer (SW-P40)......................12
Controls and their functions ........................12
Adjustment before using the subwoofer .....13
Active Servo Technology ............................15
Troubleshooting (for SW-P40)........................16
Specifications ................................................17
Thank you for selecting this YAMAHA NS-P400 Speaker Package system.
“NS-P400” is the package number which includes the YAMAHA speaker system NS-M40, NS-C40, NS-E40 and SW-P40.
This speaker package system is designed for use in a multi-channel audio system, for example a home theater system, so includes
a pair of main speakers (NS-M40), a center speaker (NS-C40), a pair of effect speakers (NS-E40) and a subwoofer system (SW-
P40).
PROFILE OF THIS SYSTEM
CONTENTS
<Main speakers (NS-M40)>
2-Way Acoustic-Suspension Speaker System
<Center speaker (NS-C40)>
Full range Acoustic-Suspension Speaker System
<Effect speakers (NS-E40)>
Full range Acoustic-Suspension Speaker System
<Subwoofer (SW-P40)>
Active Servo Processing Subwoofer System with a
built-in power amplifier
This subwoofer system employs YAMAHA Active Servo
Technology which YAMAHA developed for reproducing
higher quality super-bass sound. (Refer to page 15 for
details on Active Servo Technology.)
This unit can be added easily to your existing audio system
by connecting to either the speaker terminals or the line
output (pin jack) terminals of the amplifier.
The high frequency cut off point (HIGH CUT) control
enables you to adjust the tone balance between the
subwoofer and the main speakers.
A newly employed AUTO POWER ON/OFF switch saves
you the trouble of pressing the POWER switch when turning
this unit on or in the standby mode.
4
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install the speakers in a cool, dry, clean place – away from
windows, heat sources, sources of excessive vibration, dust,
moisture and cold. Avoid sources of humming
(transformers, motors).
To prevent fire or electrical shock, do not expose the
speakers to rain or water.
To prevent the enclosure from warping or discoloring, do not
place the speakers where it will be exposed to direct
sunlight or excessive humidity.
Do not place the speakers where it is liable to be knocked
over or struck by falling objects. Stable placement will also
ensure better sound performance.
Placing the speakers on the same shelf or rack as the
turntable can result in feedback.
Any time you note distortion, reduce the volume control on
your amplifier to a lower setting. Never allow your amplifier
to be driven into “clipping”. Otherwise the speakers may be
damaged.
When using an amplifier with a rated output power higher
than the nominal input power of the speakers, care should
be taken never to exceed the speakers’ maximum input.
As these speakers contain strong magnets (though NS-
M40, NS-C40 and SW-P40 are magnetically shielded
types), avoid placing watches, magnetic tapes, etc. near
them. Also, placing the speakers near a TV set may impair
picture color. If this happens, move the the speakers away
from TV set.
Do not attempt to clean the speakers with chemical
solvents; this might damage the finish. Use a clean, dry
cloth.
Secure placement or installation is the owner’s
responsibility.
YAMAHA shall not be liable for any accident caused by
improper placement or installation of the speakers.
<For SW-P40 only>
Never open the cabinet. If something drops into the set,
contact your dealer.
Do not use force on switches, controls or connection wires.
When moving the unit, first disconnect the power plug and
the wires connected to other equipment. Never pull the wire
itself.
Be sure to read the “TROUBLESHOOTING” section
regarding common operating errors before concluding that
the unit is faulty.
When not planning to use this unit for long periods of time
(ie., vacation, etc.), disconnect the AC power plug from the
wall outlet.
To prevent lightning damage, disconnect the AC power plug
when there is an electrical storm.
Since this unit has a built-in power amplifier, heat will radiate
from the rear panel. Therefore, place the unit apart from the
walls, allowing a space of at least 20 cm (7-7/8”) above,
behind and on the both sides of the unit. Also, do not
position with the rear panel facing down on the floor or other
surface.
Super-bass frequencies reproduced by this unit may cause
a turntable to generate a howling sound. In such a case,
move this unit away from the turntable.
If you hear distortion (i.e., unnatural, intermittent “rapping” or
“hammering” sounds) coming from this unit, reduce the
volume level. Extremely loud playing of a movie
soundtrack’s low frequency, bass-heavy sounds or similarly
loud popular music passages can damage this speaker
system.
This unit has a port called “air woofer” which is for
reproducing a super-bass sound.
Be careful not to put a hand or some objects into the port,
otherwise it may give you an electric shock or give this unit
a damage, or cause a fire.
Voltage Selector (General Model only)
The voltage selector on the rear panel of this unit must
be set for your local main voltage BEFORE plugging
into the AC main supply.
Voltages are AC 110/120/220/240V, 50/60 Hz.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit
itself is turned off.
In this state, this unit is designed to consume a very small
quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
5
English
Before you make connections, place all speakers in their proper positions respectively. The positioning of speakers are important,
because it controls the whole sound quality of this system.
Position the speakers on the basis of your listening position by following instructions on this section.
Speaker configuration
This system employs a 6 speaker configuration: 2 main speakers, 2 effect speakers, a center speaker and a subwoofer.
The main speakers are used for the main source sound plus the effect sounds. The effect speakers are used for the effect and
surround sounds, and the center speaker is for the center sounds (dialog etc.). The subwoofer is for reinforcing low frequencies on
your audio system.
Placing speakers
Main speakers: On both sides of the TV and in almost the
same height as the TV.
Effect speakers: Behind your listening position, facing
slightly inward. Nearly 1.8 m (approx. 6
feet) up from the floor.
Center speaker: Precisely between the main speakers.
Subwoofer: The position of the subwoofer is not so
critical because low bass tones are not
highly directional.
Main L Center Main R
Effect L Effect R
Subwoofer
TV set
Subwoofer
Effect L
Effect R
Main L
Main R
Center
SETTING UP THE SPEAKERS
6
It is recommended to place the subwoofer on the outside of
either the right or the left main speaker. (See fig. .) The
placement shown in fig. is also possible, however, if the
subwoofer system is placed directly facing the wall, the bass
effect may die because the sound from it and the sound
reflected by the wall may cancel. To prevent this, face the
subwoofer system obliquely to the wall as shown in fig. .
Note
There may be a case that you cannot obtain enough super-
bass sounds from this unit when listening at the middle of the
room. This is because “standing waves” have developed
between two parallel walls and the bass sounds are being
canceled.
In such a case, face the subwoofer obliquely to the wall. It also
may be necessary to break up the parallel surfaces by placing
bookshelves etc. along the walls.
Use the rubber pads
Put the provided rubber pads at the four corners on the bottom
of the subwoofer to prevent the subwoofer moving due to
vibrations etc.
Placing the subwoofer
( : subwoofer, : main speaker)
A
B
A
B
A
Mounting the effect speakers
Mount the effect speakers on a shelf, rack or on the floor
directly, or hang them on the wall.
To mount the effect speakers on a wall
The speakers can be mounted on a wall by using the holes
provided on the speakers’ rear panels.
Fasten screws into a firm wall or wall support as shown in the
diagram, and hang the holes on the rear of the speaker on the
protruding screws.
* Make sure that the screws are caught by a narrow part of
the holes securely.
WARNING:
Each speaker weighs 1.6 kg (3 lbs. 8 oz.). Do not mount
them on thin plywood or soft wall surface material, as
the screws may come out of the flimsy surface, causing
the speakers to fall down and be damaged, or result in
personal injury.
Do not fasten the speakers to wall with nails, adhesives,
or other unsound hardware. Long-term use and
vibrations may cause them to fall down.
To avoid accidents resulting from tripping over loose
speaker cords, fix them to the wall.
7
English
Holes
Screen
40mm
2mm
Min.
12mm
Diam. 4 – 5mm
Tapping screw (Available at the
hardware store)
Wall/
wall support
1
2
Mounting the center speaker
Place the center speaker on top of the TV or on the floor under
the TV or inside the TV rack so that it is stabilized.
When placing the speaker on top of the TV, to prevent the
speaker from falling down, put the provided velcro strips at two
points on both bottom of the speaker and top of the TV.
Notes
Do not place the speaker on top of the TV whose area is
smaller than the bottom area of the speaker. If placed,
the speaker may drop out causing an injury to you.
Though this speaker is a magnetically shielded type,
there may be some influence on a TV picture depending
on the type of TV or the placement of the speaker. In
such a case, place the speaker apart from the TV so that
there is no influence on TV picture.
TV set
Velcro
strip
8
Connect the speakers to the speaker output terminals of
your amplifier with the provided speaker cords.
Connect the speakers making sure not to reverse the
polarity (+, –). Connect the (+) terminals on both the
amplifier and the speakers using one side of the cord.
Connect the (–) terminals on both components using the
other side of the cord. If one speaker is connected with
reversed polarity, the sound will be unnatural and lack bass.
For the main and effect speakers only
, connect one
speaker to the left (marked L) terminals of your amplifier,
and another speaker to the right (marked R) terminals.
The subwoofer can be connected to either the speaker
output terminals or the line output (pin jack) terminals of the
amplifier. Choose one of the ways shown in this section
which is suitable for your audio system. Also, refer to the
owner’s manual for each component to be connected to this
unit.
CONNECTIONS
OUTPUT
TO SPEAKERS
INPUT1
FROM AMPLIFIER
INPUT2
ON OFF
AUTO
POWER
OUTPUT
TO SPEAKERS
INPUT1
FROM AMPLIFIER
REAR REARCENTER
CAUTION
SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
MAIN
SPEAKERS
A
B
REAR
SINGLE
Subwoofer
Effect speaker
Center speaker
Effect speaker
Right
Main speakers
Right Left
Left
Amplifier
To AC outlet
Note
This diagram shows an example of connecting speakers to an amplifier which has two sets of main speaker output terminals. If you
select this connecting way, make the amplifier output signals from both sets of main speaker output terminals.
This system can also be connected to the amplifier in other ways depending on the type of amplifier. Refer to pages 10 to 11 for
details.
Never plug in the subwoofer and other audio/video components until all connections are completed.
9
English
Red: positive (+)
Black: negative (–)
How to Connect:
Press the tab on the terminal down, as shown in the figure.
Insert the bare wire end properly into the terminal hole.
[Remove approx. 10 mm (3/8”) insulation from the speaker
cord.]
Remove your finger from the tab to allow it to lock snugly
on the cord’s wire end.
Test the security of the connection by tugging lightly on the
cord at the terminal.
Note
Do not let the bare speaker wires touch each other as this
could damage the speaker and/or the amplifier.
Good No good
1
2
3
How to connect speaker cords to the input terminals of the speakers
(except the subwoofer)
How to connect speaker cords to the subwoofer’s OUTPUT/INPUT1 terminals
For connections, cut the speaker wires as short as possible.
If the connections are faulty, no sound will be heard from the
speakers.
How to Connect:
Red: positive (+)
Black: negative (–)
Unscrew the knob.
Insert the bare wire.
[Remove approx. 10 mm
(3/8”) insulation from the
speaker cord.]
Tighten the knob and
secure the wire.
Note
Do not let the bare speaker wires touch each other as this
could damage the speaker and/or the amplifier.
* Banana Plug connections are also possible (except for
Europe model). Simply insert the Banana Plug connector
into the corresponding terminal.
1
2
3
10 mm
Red
10
If your amplifier has only one set of main speaker output terminals
OUTPUT
TO SPEAKERS
INPUT1
FROM AMPLIFIER
INPUT2
ON OFF
AUTO
POWER
OUTPUT
TO SPEAKERS
INPUT1
FROM AMPLIFIER
INPUT2
ON OFF
AUTO
POWER
Amplifier
To AC outlet
Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT terminals
of the subwoofer to the main speakers.
Subwoofer
Main speaker Main speaker
Right Left
11
English
Connect the main speakers to the speaker output terminals
of the amplifier.
Amplifier line output terminals are generally labeled PRE
OUT or SUBWOOFER OUT.
* For PRE OUT terminal connection, the amplifier must
possess at least two sets of PRE OUT terminals. With
some amplifiers with only one set of PRE OUT terminals,
connection can result in no sound from the main left and
right speakers. In this case, select the method of
connecting to the speaker output terminals.
To connect with a YAMAHA DSP amplifier (or AV receiver),
connect the LOW PASS (or SUBWOOFER etc.) terminal on
the rear of the DSP amplifier (or AV receiver) to either the
left (L) or right (R) INPUT2 terminal of the subwoofer.
To connect the subwoofer to the SPLIT SUBWOOFER
terminals on the rear of the DSP amplifier, connect them to
both of the left (L) and right (R) INPUT2 terminals of the
subwoofer.
OUTPUT
TO SPEAKERS
INPUT1
FROM AMPLIFIER
INPUT2
ON OFF
AUTO
POWER
INPUT2
ON OFF
AUTO
POWER
PRE OUT
(SPLIT, SUBWOOFER)
LOW PASS
(SUBWOOFER)
Pin plug cords
Amplifier
To AC outlet
To connect the subwoofer to line output (pin jack) terminals of the amplifier
Notes
When connected to line output terminals of the amplifier,
other speakers should not be connected to the OUTPUT
terminals on the rear panel of the subwoofer. If connected,
they will not produce sound.
When connecting to a monaural line output terminal of the
amplifier, connect to either the left or right INPUT2 terminal.
Subwoofer
Main speaker Main speaker
Left Right
1 OUTPUT (TO SPEAKERS) terminals
Can be used for connections with the main speakers.
These terminals send signals output from the amplifier to
the main speakers directly.
2 INPUT1 (FROM AMPLIFIER) terminals
Used to connect this unit with the speaker terminals of the
amplifier.
3 INPUT2 terminals
Used to input line level signals from the amplifier.
4 AUTO POWER ON/OFF switch
By setting this switch to the ON position, this unit’s
automatic power ON/OFF function operates as described
below. If you do not need this function, set to the OFF
position.
* Make sure to change the setting of this switch only when
this unit is in the standby mode.
5 POWER indicator
Lights in green when the POWER switch is turned on, and
goes off when turned into the standby mode.
* Standby mode
If the AUTO POWER ON/OFF switch on the rear panel
is set to ON, this indicator lights in red when no signal
is input to this unit.
6 POWER switch
Turns the power to this unit on and turns this unit into the
standby mode alternately whenever pressed. When this
switch is turned on, the POWER indicator over the
POWER switch lights up.
7 VOLUME control
Adjusts the volume level.
8 HIGH CUT control
Adjusts the high frequency cut off point.
Frequencies higher than the frequency selected by this
control are all cut off (and not output).
* One graduation of this control represents 10 Hz.
Automatic power ON/OFF function
When you play a source, the power to this unit turns on
automatically by sensing audio signals input to this unit.
This unit turns into the standby mode automatically if the
source being played is stopped or the input signal is cut off
for several minutes.
This function will operate responding to a certain level of
low frequency input signal. Increase the output level on
the input source if the automatic power ON function will not
operate, or decrease the level if the automatic power OFF
function will not operate.
* There may be a case that the power turns on
unexpectedly by sensing noise from other appliances. If
it occurs, set the AUTO POWER ON/OFF switch to the
OFF position.
* The level of low frequency input signal differs with each
source, and each different part on the same source. So,
this function may not operate properly depending on
some source.
This function is available only when the power of this
unit is on (by setting the POWER switch (
6) to “on”).
12
USING THE SUBWOOFER (SW-P40)
OUTPUT
TO SPEAKERS
INPUT1
FROM AMPLIFIER
INPUT2
ON OFF
AUTO
POWER
1
2 3 4
POWER
VOLUME
0I0
HIGH CUT
50Hz I50Hz
5
6
7
8
50Hz
60 140
70 130
80 120
90 110
100
I50Hz
Side panel
CONTROLS AND THEIR FUNCTIONS
Rear panel
13
English
1 Set the VOLUME control to minimum.
2 Turn on the power supply to all the components.
3 Play any source and adjust the amplifier’s volume control
to the desired listening level.
4 Turn up the VOLUME control gradually to adjust the
volume balance between this unit and the main speakers.
5 If you prefer, set the HIGH CUT control to the position
where you can obtain the optimum tone balance between
the subwoofer and the main speakers.
Notes
Once the volume balance between the subwoofer and the
main speakers is adjusted, you can adjust the volume of
your whole sound system by using only the amplifier’s
volume control.
However, if you change the main speakers NS-M40 to
others, you must make this adjustment again.
For adjusting the VOLUME control and the HIGH CUT
control, refer to “FREQUENCY CHARACTERISTICS” on
the next page.
Note about setting the HIGH CUT control
This system is designed so that the optimum tone balance
between the subwoofer and the main speakers is obtained
when this control is set at the point of 80 Hz. However, the tone
balance may change depending on the room size, the distance
from the subwoofer to the main speakers, and so on.
So, if you prefer, turn the HIGH CUT control to set it to a
position where a better tone balance is obtained.
Side panel
1, 4
5
ADJUSTMENT BEFORE USING THE SUBWOOFER
Before using the subwoofer, make an adjustment on the subwoofer to obtain the optimum volume and tone balance between the
subwoofer and the main speakers by following the procedures shown below.
14
FREQUENCY CHARACTERISTICS
Adjustment of the VOLUME control and the HIGH CUT control should be changed depending on the room size, the distance from
the subwoofer to the main speakers, sources, etc.
Following figures show the optimum adjustment of each control and the frequency characteristics when this subwoofer is combined
with NS-M40.
Frequency characteristics of this subwoofer
(SW-P40)
When combined with NS-M40
VOLUME
0I0
HIGH CUT
50Hz I50Hz
20 50 100 200 500Hz
40
50
60
70
80
90
dB
HIGH CUT 50 Hz
HIGH CUT 100 Hz
HIGH CUT 150 Hz
20 50 100 200 500Hz
40
50
60
70
80
90
dB
SW-2
NS-M40
SW-P40
15
English
ACTIVE SERVO TECHNOLOGY
The theory of Active Servo Technology is based upon two
major factors, the Helmholtz resonator and negative-
impedance drive. Active Servo Processing speakers
reproduce the bass frequencies through an “air woofer”,
which is a port or opening in the speaker’s cabinet. This
opening is used instead of, and performs the functions of,
a woofer in a conventionally designed speaker system.
Thus, signals of low amplitude within the cabinet can,
according to the Helmholtz resonance theory, be output
from this opening as waves of great amplitude if the
design is such that the size of the opening and the volume
of the cabinet are in the correct proportion to satisfy a
certain ratio.
In order to accomplish this, moreover, the amplitudes
within the cabinet must be both precise and of sufficient
power because these amplitudes must overcome the
“load” presented by the air that exists within the cabinet.
Thus it is this problem that is resolved through the
employment of a design in which the amplifier functions to
supply special signals. If the electrical resistance of the voice
coil could be reduced to zero, the movement of the speaker
unit would become linear with respect to signal voltage, and,
to accomplish this, a special negative-impedance output-drive
amplifier for subtracting output impedance of the amplifier is
used.
By employing negative-impedance drive circuits, the amplifier
is able to generate precise, low-amplitude low-frequency
waves with superior damping characteristics, and these
waves are then radiated from the cabinet opening as high-
amplitude signals. The system can, therefore, by employing
the negative-impedance output drive amplifier and a speaker
cabinet with the Helmholtz resonator, reproduce an extremely
wide range of frequencies with amazing sound quality and
less distortion.
The features described above, then, are combined to be the
fundamental structure of the Active Servo Technology.
The front grille is fastened to the enclosure at four points,
and can be removed if desired. To remove the grille, first
hold the bottom of the grille and unfasten the lower part of
the grille by pulling it gently, and then hold both sides of the
grille and slowly pull straight away from the speaker. To
reattach, line up the four pegs on the inside surface of the
grille with the four corresponding holes on the speaker and
push gently.
Note
When the grille is removed, take care not to touch the
speaker unit with your hands or to exert excessive force with
tools.
REMOVING THE FRONT GRILLE (for NS-M40 and SW-P40 only)
Signals of low amplitude
Air woofer
(Helmholtz resonator)
Negative-impedance
output drive
High-
amplitude
bass
sound
Signals
Active
Servo
Processing
Amplifier
Cabinet
Port
16
SYMPTOM
Power is not supplied even though the
POWER switch is ON.
No sound.
Sound level is too low.
Automatic power ON function will not
work.
Automatic power OFF function will work
unexpectedly.
Automatic power ON function will work
unexpectedly.
CAUSE
The power plug is not securely connected.
The VOLUME control is set to 0.
Speaker cables are not connected securely.
Speaker cables are connected incorrectly.
A source sound with few bass frequencies is
played.
It is influenced by standing waves.
The POWER switch is turned off.
The level of input signal is too low.
The level of input signal is too low.
An influence of noise generated from
external digital equipment etc.
REMEDY
Connect it securely.
Turn the VOLUME control to right.
Connect them securely.
Connect them correctly, that is to say L (left)
to L, R (right) to R, “+” to “+” and “–” to “–”.
Play a source sound with bass frequencies.
Set the HIGH CUT control to a higher
position. (Turn the knob to right.)
Re-position the subwoofer or break up the
parallel surface by placing bookshelves etc.
along the walls.
Turn the POWER switch on.
Increase the level of input signal on the
source.
Increase the level of input signal on the
source.
Move this unit farther away from such
equipment and/or change the position of
connected speaker cables.
Otherwise, do not use the automatic power
ON function of this unit.
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and
contact your authorized YAMAHA dealer or service center for help.
TROUBLESHOOTING (for SW-P40)
17
English
<NS-M40, NS-C40, NS-E40>
Type
<NS-M40>.......2-Way Acoustic-Suspension Speaker System
Magnetically-shielded type
<NS-C40>.............................Full range Acoustic-Suspension
Speaker System
Magnetically-shielded type
<NS-E40>.............................Full range Acoustic-Suspension
Speaker System
Speaker Unit
<NS-M40>....................................14 cm (5-1/2”) cone woofer
19 mm (3/4”) semidome tweeter
<NS-C40>.........................10 cm (3-15/16”) cone speaker x 2
<NS-E40>...............................10 cm (3-15/16”) cone speaker
Nominal Input Power
<NS-M40>........................................................................40W
<NS-C40>........................................................................50W
<NS-E40>.........................................................................25W
Maximum Input Power
<NS-M40>......................................................................120W
<NS-C40>......................................................................150W
<NS-E40>.........................................................................80W
Impedance......................................................................6 ohms
Frequency Response
<NS-M40>.........................................................65 Hz–20 kHz
<NS-C40>.........................................................65 Hz–20 kHz
<NS-E40>.........................................................70 Hz–20 kHz
Sensitivity.................................................................90 dB/W
m
Dimensions (W x H x D)
<NS-M40>..............................171 mm x 281 mm x 188.5 mm
(6-3/4” x 11-1/16” x 7-7/16”)
<NS-C40>..............................436 mm x 131 mm x 210.5 mm
(17-3/16” x 5-3/16” x 8-5/16”)
<NS-E40>.................................171 mm x 281 mm x 112 mm
(6-3/4” x 11-1/16” x 4-7/16”)
Weight
<NS-M40>...........................................2.5 kg (5 lbs. 8 oz.) x 2
<NS-C40>.................................................3.2 kg (7 lbs. 1 oz.)
<NS-E40>............................................1.6 kg (3 lbs. 8 oz.) x 2
<SW-P40>
Type......................Active Servo Processing Subwoofer System
Magnetically-shielded type
Speaker Unit...................................20 cm (7-7/8”) cone woofer
Amplifier Output....................................................50W/5 ohms
High-Cut Filter...............................50 Hz–150 Hz (–24 dB/oct.)
Impedance
INPUT1....................................................................4.7 k-ohms
INPUT2.....................................................................10 k-ohms
Frequency Response ..........................30 Hz–200 Hz (–10 dB)
Power Supply
Europe model..............................................AC 230V, 50 Hz
Australia model...........................................AC 240V, 50 Hz
General model...................AC 110/120/220/240V, 50/60 Hz
Power Consumption..........................................................50W
Dimensions (W x H x D) .............320 mm x 400 mm x 344 mm
(12-5/8” x 15-3/4” x 13-9/16”)
Weight....................................................12.2 kg (26 lbs. 13 oz.)
* Please note that all specifications are subject to change
without notice.
SPECIFICATIONS
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VV18440

Documenttranscriptie

GAR NS-P400 Natural Sound Speaker Package System Jeu d’enceintes “Son Naturel” Natural-Sound-Lautsprechersystem Natural Sound högtalarpaket Sistema completo di altoparlanti a suono naturale Paquete del sistema de altavoces con sonido natural Natural Sound Luidsprekerpakket Systeem Active Servo Technology OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTE ZUBEHÖRTEILE MEDFÖLJANDE TILLBEHÖR ACCESSORI IN DOTAZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE ACCESSOIRES ● ● ● ● ● ● ● Speaker cords Câbles d’enceintes Lautsprecheranschlußkabel Högtalarledningar Cavi per gli altoparlanti Cables de los altavoces Luidsprekerdraden ● ● ● ● ● ● ● After unpacking, check that the following parts are contained. Après le déballage, vérifier que les pièces suivantes sont incluses. Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind. Kontrollera efter det apparaten packats upp att följande delar finns med. Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio. Desembale el aparato y verificar que los siguientes accesorios están en la caja. Controleer na het uitpakken of de volgende onderdelen voorhanden zijn. ● ● ● ● ● ● ● ● ● ● ● ● ● ● 2 Rubber Pads (for SW-P40) Tampons en caoutchouc (pour SW-P40) Gummiunterlagen (für SW-P40) Gummidynor (för SW-P40) Piedini di gomma (per l’SW-P40) Forros de caucho (para SW-P40) Anti-slip rubbers (voor SW-P40) Velcro strips (for NS-C40) Bandes velcro (pour NS-C40) Velcro-Streifen (für NS-C40) Kardborreremsor (för NS-C40) Strisce autoadesive (per l’NS-C40) Cintas Velcro (para NS-C40) Velcro strips (voor NS-C40) PROFILE OF THIS SYSTEM English Thank you for selecting this YAMAHA NS-P400 Speaker Package system. “NS-P400” is the package number which includes the YAMAHA speaker system NS-M40, NS-C40, NS-E40 and SW-P40. This speaker package system is designed for use in a multi-channel audio system, for example a home theater system, so includes a pair of main speakers (NS-M40), a center speaker (NS-C40), a pair of effect speakers (NS-E40) and a subwoofer system (SWP40). <Main speakers (NS-M40)> <Subwoofer (SW-P40)> 2-Way Acoustic-Suspension Speaker System Active Servo Processing Subwoofer System with a built-in power amplifier <Center speaker (NS-C40)> • Full range Acoustic-Suspension Speaker System <Effect speakers (NS-E40)> Full range Acoustic-Suspension Speaker System • • • This subwoofer system employs YAMAHA Active Servo Technology which YAMAHA developed for reproducing higher quality super-bass sound. (Refer to page 15 for details on Active Servo Technology.) This unit can be added easily to your existing audio system by connecting to either the speaker terminals or the line output (pin jack) terminals of the amplifier. The high frequency cut off point (HIGH CUT) control enables you to adjust the tone balance between the subwoofer and the main speakers. A newly employed AUTO POWER ON/OFF switch saves you the trouble of pressing the POWER switch when turning this unit on or in the standby mode. CONTENTS Supplied accessories .......................................2 Caution ............................................................4 Using the subwoofer (SW-P40)......................12 Controls and their functions ........................12 Adjustment before using the subwoofer .....13 Active Servo Technology ............................15 Setting up the speakers ...................................5 Troubleshooting (for SW-P40) ........................16 Connections ....................................................8 Specifications ................................................17 Profile of This System .....................................3 3 CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. ● To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. ● Install the speakers in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). ● To prevent fire or electrical shock, do not expose the speakers to rain or water. ● To prevent the enclosure from warping or discoloring, do not place the speakers where it will be exposed to direct sunlight or excessive humidity. ● Do not place the speakers where it is liable to be knocked over or struck by falling objects. Stable placement will also ensure better sound performance. ● Placing the speakers on the same shelf or rack as the turntable can result in feedback. ● Any time you note distortion, reduce the volume control on your amplifier to a lower setting. Never allow your amplifier to be driven into “clipping”. Otherwise the speakers may be damaged. ● When using an amplifier with a rated output power higher than the nominal input power of the speakers, care should be taken never to exceed the speakers’ maximum input. ● ● ● As these speakers contain strong magnets (though NSM40, NS-C40 and SW-P40 are magnetically shielded types), avoid placing watches, magnetic tapes, etc. near them. Also, placing the speakers near a TV set may impair picture color. If this happens, move the the speakers away from TV set. Do not attempt to clean the speakers with chemical solvents; this might damage the finish. Use a clean, dry cloth. Secure placement or installation is the owner’s responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of the speakers. <For SW-P40 only> ● Never open the cabinet. If something drops into the set, contact your dealer. ● Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wire itself. ● Be sure to read the “TROUBLESHOOTING” section regarding common operating errors before concluding that the unit is faulty. ● When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet. ● To prevent lightning damage, disconnect the AC power plug when there is an electrical storm. ● Since this unit has a built-in power amplifier, heat will radiate from the rear panel. Therefore, place the unit apart from the walls, allowing a space of at least 20 cm (7-7/8”) above, behind and on the both sides of the unit. Also, do not position with the rear panel facing down on the floor or other surface. ● Super-bass frequencies reproduced by this unit may cause a turntable to generate a howling sound. In such a case, move this unit away from the turntable. ● If you hear distortion (i.e., unnatural, intermittent “rapping” or “hammering” sounds) coming from this unit, reduce the volume level. Extremely loud playing of a movie soundtrack’s low frequency, bass-heavy sounds or similarly loud popular music passages can damage this speaker system. ● This unit has a port called “air woofer” which is for reproducing a super-bass sound. Be careful not to put a hand or some objects into the port, otherwise it may give you an electric shock or give this unit a damage, or cause a fire. ● Voltage Selector (General Model only) The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are AC 110/120/220/240V, 50/60 Hz. This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. In this state, this unit is designed to consume a very small quantity of power. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 4 Before you make connections, place all speakers in their proper positions respectively. The positioning of speakers are important, because it controls the whole sound quality of this system. Position the speakers on the basis of your listening position by following instructions on this section. English SETTING UP THE SPEAKERS Speaker configuration This system employs a 6 speaker configuration: 2 main speakers, 2 effect speakers, a center speaker and a subwoofer. The main speakers are used for the main source sound plus the effect sounds. The effect speakers are used for the effect and surround sounds, and the center speaker is for the center sounds (dialog etc.). The subwoofer is for reinforcing low frequencies on your audio system. Main L Center Main R Subwoofer Effect L Effect R Placing speakers Main speakers: On both sides of the TV and in almost the same height as the TV. Effect speakers: Behind your listening position, facing slightly inward. Nearly 1.8 m (approx. 6 feet) up from the floor. Center speaker: Precisely between the main speakers. Subwoofer: The position of the subwoofer is not so critical because low bass tones are not highly directional. Main R Center Main L Subwoofer TV set Effect R Effect L 5 ■ Placing the subwoofer A ( : subwoofer, B : main speaker) It is recommended to place the subwoofer on the outside of either the right or the left main speaker. (See fig. A .) The placement shown in fig. B is also possible, however, if the subwoofer system is placed directly facing the wall, the bass effect may die because the sound from it and the sound reflected by the wall may cancel. To prevent this, face the subwoofer system obliquely to the wall as shown in fig. A . Note There may be a case that you cannot obtain enough superbass sounds from this unit when listening at the middle of the room. This is because “standing waves” have developed between two parallel walls and the bass sounds are being canceled. In such a case, face the subwoofer obliquely to the wall. It also may be necessary to break up the parallel surfaces by placing bookshelves etc. along the walls. 6 Use the rubber pads Put the provided rubber pads at the four corners on the bottom of the subwoofer to prevent the subwoofer moving due to vibrations etc. Mount the effect speakers on a shelf, rack or on the floor directly, or hang them on the wall. To mount the effect speakers on a wall The speakers can be mounted on a wall by using the holes provided on the speakers’ rear panels. Fasten screws into a firm wall or wall support as shown in the diagram, and hang the holes on the rear of the speaker on the protruding screws. * Make sure that the screws are caught by a narrow part of the holes securely. WARNING: • Each speaker weighs 1.6 kg (3 lbs. 8 oz.). Do not mount them on thin plywood or soft wall surface material, as the screws may come out of the flimsy surface, causing the speakers to fall down and be damaged, or result in personal injury. • Do not fasten the speakers to wall with nails, adhesives, or other unsound hardware. Long-term use and vibrations may cause them to fall down. • To avoid accidents resulting from tripping over loose speaker cords, fix them to the wall. English ■ Mounting the effect speakers Diam. 4 – 5mm 40mm Min. 12mm 2mm Wall/ wall support Holes Tapping screw (Available at the hardware store) ■ Mounting the center speaker Place the center speaker on top of the TV or on the floor under the TV or inside the TV rack so that it is stabilized. When placing the speaker on top of the TV, to prevent the speaker from falling down, put the provided velcro strips at two points on both bottom of the speaker and top of the TV. Velcro strip Notes • Do not place the speaker on top of the TV whose area is smaller than the bottom area of the speaker. If placed, the speaker may drop out causing an injury to you. • Though this speaker is a magnetically shielded type, there may be some influence on a TV picture depending on the type of TV or the placement of the speaker. In such a case, place the speaker apart from the TV so that there is no influence on TV picture. Screen TV set 1 2 7 CONNECTIONS Never plug in the subwoofer and other audio/video components until all connections are completed. • For the main and effect speakers only, connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals. • The subwoofer can be connected to either the speaker output terminals or the line output (pin jack) terminals of the amplifier. Choose one of the ways shown in this section which is suitable for your audio system. Also, refer to the owner’s manual for each component to be connected to this unit. • Connect the speakers to the speaker output terminals of your amplifier with the provided speaker cords. • Connect the speakers making sure not to reverse the polarity (+, –). Connect the (+) terminals on both the amplifier and the speakers using one side of the cord. Connect the (–) terminals on both components using the other side of the cord. If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass. Effect speaker Effect speaker Right Left Center speaker Amplifier REAR SINGLE REAR CENTER REAR A B MAIN CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING. SPEAKERS Subwoofer OUTPUT TO SPEAKERS OUTPUT INPUT2 TO SPEAKERS Right AUTO POWER Left ON OFF FROM AMPLIFIER INPUT1 Main speakers FROM AMPLIFIER INPUT1 To AC outlet Note This diagram shows an example of connecting speakers to an amplifier which has two sets of main speaker output terminals. If you select this connecting way, make the amplifier output signals from both sets of main speaker output terminals. This system can also be connected to the amplifier in other ways depending on the type of amplifier. Refer to pages 10 to 11 for details. 8 English How to connect speaker cords to the input terminals of the speakers (except the subwoofer) How to Connect: Good No good ➀ ➁ 10 mm ➂ ➃ Red: positive (+) Black: negative (–) Red 2 Press the tab on the terminal down, as shown in the figure. Insert the bare wire end properly into the terminal hole. [Remove approx. 10 mm (3/8”) insulation from the speaker cord.] Remove your finger from the tab to allow it to lock snugly on the cord’s wire end. Test the security of the connection by tugging lightly on the cord at the terminal. Note Do not let the bare speaker wires touch each other as this could damage the speaker and/or the amplifier. 1 3 How to connect speaker cords to the subwoofer’s OUTPUT/INPUT1 terminals For connections, cut the speaker wires as short as possible. If the connections are faulty, no sound will be heard from the speakers. * Banana Plug connections are also possible (except for Europe model). Simply insert the Banana Plug connector into the corresponding terminal. How to Connect: Red: positive (+) Black: negative (–) 2 1 3 ➀ Unscrew the knob. ➁ Insert the bare wire. [Remove approx. 10 mm (3/8”) insulation from the speaker cord.] ➂ Tighten the knob and secure the wire. Note Do not let the bare speaker wires touch each other as this could damage the speaker and/or the amplifier. 9 If your amplifier has only one set of main speaker output terminals Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT terminals of the subwoofer to the main speakers. Main speaker Main speaker Right Left OUTPUT TO SPEAKERS INPUT2 AUTO POWER Subwoofer ON OUTPUT TO SPEAKERS INPUT2 OFF AUTO POWER ON OFF FROM AMPLIFIER INPUT1 FROM AMPLIFIER INPUT1 Amplifier To AC outlet 10 • Connect the main speakers to the speaker output terminals of the amplifier. • Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT. * For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifiers with only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this case, select the method of connecting to the speaker output terminals. Main speaker Subwoofer OUTPUT TO SPEAKERS INPUT2 INPUT2 English To connect the subwoofer to line output (pin jack) terminals of the amplifier • To connect with a YAMAHA DSP amplifier (or AV receiver), connect the LOW PASS (or SUBWOOFER etc.) terminal on the rear of the DSP amplifier (or AV receiver) to either the left (L) or right (R) INPUT2 terminal of the subwoofer. To connect the subwoofer to the SPLIT SUBWOOFER terminals on the rear of the DSP amplifier, connect them to both of the left (L) and right (R) INPUT2 terminals of the subwoofer. AUTO POWER Main speaker AUTO POWER ON OFF FROM AMPLIFIER INPUT1 ON OFF Left Right Pin plug cords To AC outlet LOW PASS (SUBWOOFER) Amplifier PRE OUT (SPLIT, SUBWOOFER) Notes • When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of the subwoofer. If connected, they will not produce sound. • When connecting to a monaural line output terminal of the amplifier, connect to either the left or right INPUT2 terminal. 11 USING THE SUBWOOFER (SW-P40) CONTROLS AND THEIR FUNCTIONS Rear panel Side panel 1 OUTPUT INPUT2 TO SPEAKERS AUTO POWER POWER 5 6 VOLUME 7 0 I0 HIGH CUT ON OFF 8 50Hz FROM AMPLIFIER INPUT1 2 I50Hz 3 4 1 OUTPUT (TO SPEAKERS) terminals Can be used for connections with the main speakers. These terminals send signals output from the amplifier to the main speakers directly. 2 INPUT1 (FROM AMPLIFIER) terminals Used to connect this unit with the speaker terminals of the amplifier. 3 INPUT2 terminals Used to input line level signals from the amplifier. 8 HIGH CUT control Adjusts the high frequency cut off point. Frequencies higher than the frequency selected by this control are all cut off (and not output). * One graduation of this control represents 10 Hz. 90 80 70 60 50Hz 100 110 120 130 140 I50Hz 4 AUTO POWER ON/OFF switch By setting this switch to the ON position, this unit’s automatic power ON/OFF function operates as described below. If you do not need this function, set to the OFF position. * Make sure to change the setting of this switch only when this unit is in the standby mode. 5 POWER indicator Lights in green when the POWER switch is turned on, and goes off when turned into the standby mode. * Standby mode If the AUTO POWER ON/OFF switch on the rear panel is set to ON, this indicator lights in red when no signal is input to this unit. 6 POWER switch Turns the power to this unit on and turns this unit into the standby mode alternately whenever pressed. When this switch is turned on, the POWER indicator over the POWER switch lights up. 7 VOLUME control Adjusts the volume level. 12 Automatic power ON/OFF function When you play a source, the power to this unit turns on automatically by sensing audio signals input to this unit. This unit turns into the standby mode automatically if the source being played is stopped or the input signal is cut off for several minutes. This function will operate responding to a certain level of low frequency input signal. Increase the output level on the input source if the automatic power ON function will not operate, or decrease the level if the automatic power OFF function will not operate. * There may be a case that the power turns on unexpectedly by sensing noise from other appliances. If it occurs, set the AUTO POWER ON/OFF switch to the OFF position. * The level of low frequency input signal differs with each source, and each different part on the same source. So, this function may not operate properly depending on some source. This function is available only when the power of this unit is on (by setting the POWER switch (6) to “on”). English ADJUSTMENT BEFORE USING THE SUBWOOFER Before using the subwoofer, make an adjustment on the subwoofer to obtain the optimum volume and tone balance between the subwoofer and the main speakers by following the procedures shown below. Side panel POWER VOLUME 1, 4 0 I0 HIGH CUT 5 50Hz 1 2 3 4 5 Set the VOLUME control to minimum. Turn on the power supply to all the components. Play any source and adjust the amplifier’s volume control to the desired listening level. Turn up the VOLUME control gradually to adjust the volume balance between this unit and the main speakers. If you prefer, set the HIGH CUT control to the position where you can obtain the optimum tone balance between the subwoofer and the main speakers. I50Hz Notes • Once the volume balance between the subwoofer and the main speakers is adjusted, you can adjust the volume of your whole sound system by using only the amplifier’s volume control. However, if you change the main speakers NS-M40 to others, you must make this adjustment again. • For adjusting the VOLUME control and the HIGH CUT control, refer to “FREQUENCY CHARACTERISTICS” on the next page. Note about setting the HIGH CUT control This system is designed so that the optimum tone balance between the subwoofer and the main speakers is obtained when this control is set at the point of 80 Hz. However, the tone balance may change depending on the room size, the distance from the subwoofer to the main speakers, and so on. So, if you prefer, turn the HIGH CUT control to set it to a position where a better tone balance is obtained. 13 ■ FREQUENCY CHARACTERISTICS Adjustment of the VOLUME control and the HIGH CUT control should be changed depending on the room size, the distance from the subwoofer to the main speakers, sources, etc. Following figures show the optimum adjustment of each control and the frequency characteristics when this subwoofer is combined with NS-M40. Frequency characteristics of this subwoofer (SW-P40) dB HIGH CUT 100 Hz 90 HIGH CUT 150 Hz 80 70 60 HIGH CUT 50 Hz 50 40 20 • When combined with NS-M40 VOLUME 50 100 200 500Hz dB 90 80 0 I0 HIGH CUT SW-P40 SW-2 70 60 NS-M40 50Hz I50Hz 50 40 20 14 50 100 200 500Hz English ACTIVE SERVO TECHNOLOGY The theory of Active Servo Technology is based upon two major factors, the Helmholtz resonator and negativeimpedance drive. Active Servo Processing speakers reproduce the bass frequencies through an “air woofer”, which is a port or opening in the speaker’s cabinet. This opening is used instead of, and performs the functions of, a woofer in a conventionally designed speaker system. Thus, signals of low amplitude within the cabinet can, according to the Helmholtz resonance theory, be output from this opening as waves of great amplitude if the design is such that the size of the opening and the volume of the cabinet are in the correct proportion to satisfy a certain ratio. In order to accomplish this, moreover, the amplitudes within the cabinet must be both precise and of sufficient power because these amplitudes must overcome the “load” presented by the air that exists within the cabinet. Highamplitude bass sound Thus it is this problem that is resolved through the employment of a design in which the amplifier functions to supply special signals. If the electrical resistance of the voice coil could be reduced to zero, the movement of the speaker unit would become linear with respect to signal voltage, and, to accomplish this, a special negative-impedance output-drive amplifier for subtracting output impedance of the amplifier is used. By employing negative-impedance drive circuits, the amplifier is able to generate precise, low-amplitude low-frequency waves with superior damping characteristics, and these waves are then radiated from the cabinet opening as highamplitude signals. The system can, therefore, by employing the negative-impedance output drive amplifier and a speaker cabinet with the Helmholtz resonator, reproduce an extremely wide range of frequencies with amazing sound quality and less distortion. The features described above, then, are combined to be the fundamental structure of the Active Servo Technology. Air woofer (Helmholtz resonator) Cabinet Port Negative-impedance output drive Active Servo Processing Amplifier Signals Signals of low amplitude REMOVING THE FRONT GRILLE (for NS-M40 and SW-P40 only) The front grille is fastened to the enclosure at four points, and can be removed if desired. To remove the grille, first hold the bottom of the grille and unfasten the lower part of the grille by pulling it gently, and then hold both sides of the grille and slowly pull straight away from the speaker. To reattach, line up the four pegs on the inside surface of the grille with the four corresponding holes on the speaker and push gently. Note When the grille is removed, take care not to touch the speaker unit with your hands or to exert excessive force with tools. 15 TROUBLESHOOTING (for SW-P40) If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM CAUSE REMEDY Power is not supplied even though the POWER switch is ON. The power plug is not securely connected. Connect it securely. No sound. The VOLUME control is set to 0. Turn the VOLUME control to right. Speaker cables are not connected securely. Connect them securely. Speaker cables are connected incorrectly. Connect them correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. A source sound with few bass frequencies is played. Play a source sound with bass frequencies. Set the HIGH CUT control to a higher position. (Turn the knob to right.) It is influenced by standing waves. Re-position the subwoofer or break up the parallel surface by placing bookshelves etc. along the walls. Automatic power ON function will not work. The POWER switch is turned off. Turn the POWER switch on. The level of input signal is too low. Increase the level of input signal on the source. Automatic power OFF function will work unexpectedly. The level of input signal is too low. Increase the level of input signal on the source. Automatic power ON function will work unexpectedly. An influence of noise generated from external digital equipment etc. Move this unit farther away from such equipment and/or change the position of connected speaker cables. Sound level is too low. Otherwise, do not use the automatic power ON function of this unit. 16 English SPECIFICATIONS <NS-M40, NS-C40, NS-E40> <SW-P40> Type <NS-M40> .......2-Way Acoustic-Suspension Speaker System Magnetically-shielded type <NS-C40> .............................Full range Acoustic-Suspension Speaker System Magnetically-shielded type <NS-E40> .............................Full range Acoustic-Suspension Speaker System Type......................Active Servo Processing Subwoofer System Magnetically-shielded type Speaker Unit <NS-M40> ....................................14 cm (5-1/2”) cone woofer 19 mm (3/4”) semidome tweeter <NS-C40> .........................10 cm (3-15/16”) cone speaker x 2 <NS-E40> ...............................10 cm (3-15/16”) cone speaker Nominal Input Power <NS-M40> ........................................................................40W <NS-C40> ........................................................................50W <NS-E40>.........................................................................25W Maximum Input Power <NS-M40> ......................................................................120W <NS-C40> ......................................................................150W <NS-E40>.........................................................................80W Speaker Unit ...................................20 cm (7-7/8”) cone woofer Amplifier Output....................................................50W/5 ohms High-Cut Filter ...............................50 Hz–150 Hz (–24 dB/oct.) Impedance INPUT1....................................................................4.7 k-ohms INPUT2.....................................................................10 k-ohms Frequency Response ..........................30 Hz–200 Hz (–10 dB) Power Supply Europe model..............................................AC 230V, 50 Hz Australia model...........................................AC 240V, 50 Hz General model...................AC 110/120/220/240V, 50/60 Hz Power Consumption ..........................................................50W Dimensions (W x H x D) .............320 mm x 400 mm x 344 mm (12-5/8” x 15-3/4” x 13-9/16”) Weight....................................................12.2 kg (26 lbs. 13 oz.) Impedance......................................................................6 ohms Frequency Response <NS-M40> .........................................................65 Hz–20 kHz <NS-C40> .........................................................65 Hz–20 kHz <NS-E40> .........................................................70 Hz–20 kHz * Please note that all specifications are subject to change without notice. Sensitivity.................................................................90 dB/W m ● Dimensions (W x H x D) <NS-M40> ..............................171 mm x 281 mm x 188.5 mm (6-3/4” x 11-1/16” x 7-7/16”) <NS-C40> ..............................436 mm x 131 mm x 210.5 mm (17-3/16” x 5-3/16” x 8-5/16”) <NS-E40> .................................171 mm x 281 mm x 112 mm (6-3/4” x 11-1/16” x 4-7/16”) Weight <NS-M40> ...........................................2.5 kg (5 lbs. 8 oz.) x 2 <NS-C40> .................................................3.2 kg (7 lbs. 1 oz.) <NS-E40>............................................1.6 kg (3 lbs. 8 oz.) x 2 17 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA VV18440
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Yamaha 50W de handleiding

Categorie
Subwoofers
Type
de handleiding