Documenttranscriptie

ENGLISH FRANÇAIS Owner’s Manual FRANÇAIS ESPAÑOL YDP-S51 Mode d’emploi Manual de instrucciones For information on assembling the keyboard stand, refer to the instructions at the end of this manual. Before using the instrument, be sure to read “PRECAUTIONS” on pages 5–6. EN Pour obtenir des informations sur l'assemblage du support du clavier, reportez-vous aux instructions à la fin de ce manuel. FR Para información sobre el montaje del soporte del teclado, consulte las instrucciones al final de este manual. ES  ENGLISH Table of Contents PRECAUTIONS ........................................ 5 Song Playback and Practice..................22 Listening to 50 Preset Songs ........................................22 About the Manuals................................. 7 Practicing a One-Hand Part..........................................23 Included Accessories .............................. 7 Playing from the top of the bar including a rest or blank..............................................................23 Panel Controls and Terminals ................ 8 Recording Your Performance ...............24 Recording Your Performance........................................24 Changing the Initial Settings of the Recorded Song .....25 Basic Operations Deleting Recorded Data...............................................25 Key Cover and Music Rest ..............................................9 Data Maintained When Power is Turned Off .........................................................26 Turning the Power On .................................................10 Saving the User Song data to a computer ....................26 Auto Power Off ............................................................11 Transferring SMF Files Between a Computer and this Instrument ............................................................26 Setting Up .............................................. 9 Using Headphones.......................................................11 Playing the Piano ................................. 12 Initializing the Settings ........................26 Setting the Volume ......................................................12 Intelligent Acoustic Control (I.A.C.)..............................12 Using the Pedals ..........................................................13 Using the Damper Resonance ......................................13 Using the Metronome..................................................14 Changing the Touch Sensitivity....................................15 Maintenance ........................................ 15 Advanced Operations Playing Various Musical Instrument Sounds (Voices) .................................... 16 Selecting a Voice ..........................................................16 Listening to the Demo Songs .......................................17 Adding Variations to the Sound (Reverb)......................18 Transposing the Pitch in Semitones ..............................19 Fine-tuning the Pitch ...................................................19 Layering Two Voices (Dual mode) ................................20 Playing Duo .................................................................21 2 YDP-S51 Owner’s Manual Appendix Troubleshooting ...................................27 Keyboard Stand Assembly....................28 Specifications ........................................31 Index .....................................................32  This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25’ cord (or less ) is 18 AWG. NOTE: The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units. This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. Some Yamaha products may have benches and / or accessory mounting fixtures that are either supplied with the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional fixtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended. Battery Notice: This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. This product may also use “household” type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, never mix old batteries with new ones, and never mix different types of batteries. Batteries MUST be installed correctly. Mismatches or incorrect installation may result in overheating and battery case rupture. Warning: Do not attempt to disassemble, or incinerate any battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by the laws in your area. Note: Check with any retailer of household type batteries in your area for battery disposal information. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly. NAME PLATE LOCATION: The name plate is located on the bottom of the product. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. NOTICE: Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Model Serial No. Purchase Date 92-BP (bottom) PLEASE KEEP THIS MANUAL ENGLISH SPECIAL MESSAGE SECTION  FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party : Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620 Telephone : 714-522-9011 Type of Equipment : Digital Piano Model Name : YDP-S51 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation. See user manual instructions if interference to radio reception is suspected. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC) OBSERVERA! Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar ansluten till vägguttaget, även om själva apparaten har stängts av. ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt, sålænge netledningen sidder i en stikkontakt, som er tændt — også selvom der er slukket på apparatets afbryder. VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko laitetta verkosta. (class B) IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying the terminals in your plug proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. (2 wires)  ENGLISH PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. ENGLISH PRECAUTIONS WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Water warning Power supply/AC power adaptor • Do not place the power cord near heat sources such as heaters or radiators. Also, do not excessively bend or otherwise damage the cord, or place heavy objects on it. • Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument. • Use the specified adaptor (page 31) only. Using the wrong adaptor can result in damage to the instrument or overheating. • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. • Do not expose the instrument to rain, use it near water or in damp or wet conditions, place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into the instrument, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. • Never insert or remove an electric plug with wet hands. Fire warning • Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. Do not open • This instrument contains no user-serviceable parts. Do not open the instrument or attempt to disassemble or modify the internal components in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. If you notice any abnormality • When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. Then have the device inspected by Yamaha service personnel. - The power cord or plug becomes frayed or damaged. - It emits unusual smells or smoke. - Some object has been dropped into the instrument. - There is a sudden loss of sound during use of the instrument. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Location Power supply/AC power adaptor • Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. • Do not place the instrument in an unstable position where it might accidentally fall over. • When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. • When transporting or moving the instrument, always use two or more people. Attempting to lift the instrument by yourself may damage your back, result in other injury, or cause damage to the instrument itself. • Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms. • Before moving the instrument, remove all connected cables, to prevent damage to the cables or injury to anyone who might trip over them. Assembly • Read carefully the attached documentation explaining the assembly process. Failure to assemble the instrument in the proper sequence might result in damage to the instrument or even injury. • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. • Use only the stand specified for the instrument. When attaching the stand or rack, use the provided screws only. Failure to do so could cause damage to the internal components or result in the instrument falling over. DMI-5 1/2 YDP-S51 Owner’s Manual 5  Handling caution ENGLISH Connections • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. • Be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. • Do not insert a finger or hand in any gaps on the key cover or instrument. Also take care that the key cover does not pinch your finger. • Never insert or drop paper, metallic, or other objects into the gaps on the key cover, panel or keyboard. This could cause physical injury to you or others, damage to the instrument or other property, or operational failure. • Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use. Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet. NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. ■ Handling and Maintenance • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise. • Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.) • Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. • During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth. ■ Saving data • Saved data may be lost due to malfunction or incorrect operation. Save important data to external device such as a computer (see online manual, Computer-related Operations; page 7). Information ■ About copyrights • Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. • This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES. ■ About functions/data bundled with the instrument • Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original. ■ About this manual • The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. 6 YDP-S51 Owner’s Manual DMI-5 2/2  ENGLISH Thank you for choosing the Yamaha ARIUS. In order to make the most of the performance potential and features of the instrument, please read the manuals thoroughly, and keep them in a handy place for later reference. About the Manuals This instrument has the following manuals. Included Manuals Owner’s Manual (this book) Explains how to use the instrument. Quick Operation Guide (separate sheet) Shows in chart form the functions assigned to the buttons and the keyboard for quick understanding. Online Manuals (PDF) Computer-related Operations Includes instructions on connecting this instrument to a computer, and operations related to transferring song data, as well as MIDI functions such as MIDI channel and Local Control settings. MIDI Reference Contains the MIDI Data Format and MIDI Implementation chart. MIDI Basics (only in English, French and German) Contains basic explanations about MIDI. To obtain these manuals, access the Yamaha Manual Library, enter “YDP-S51” or “MIDI Basics” to the Model Name box, then click [SEARCH]. Yamaha Manual Library http://www.yamaha.co.jp/manual/ Included Accessories ❏ Owner’s Manual (this book) ❏ Quick Operation Guide (separate sheet) ❏ “50 Greats for the Piano” (music book) ❏ Online Member Product Registration*1 ❏ AC Power adaptor *2 *1 You will need the PRODUCT ID on the sheet in order to fill out the User Registration form. *2 May not be included depending on your particular area. Please check with your Yamaha dealer. YDP-S51 Owner’s Manual 7  ENGLISH Panel Controls and Terminals 1 3 9 4 2 5 6 Bottom 7 ! $ 8 (Keyboard side) ) Bottom Rear TO PEDAL 16V PHONES Shows the DC IN and [TO PEDAL] jacks as seen when viewed from the rear of the instrument. (Keyboard side) 1 [ # @ ] (Standby/On) switch..................... page 10 For turning the power on or setting to standby. 2 [MASTER VOLUME] knob.................... page 12 For adjusting the volume of the entire sound. 3 [DEMO/SONG] button .................. pages 17, 22 8 [PLAY] button ........................................page 25 For playing back the recorded performance. 9 [FUNCTION] .........................................page 19 Simultaneously holding these two buttons and pressing the specified key sets will set the MIDI or Transpose parameters. For playing the Demo Songs and the Preset Songs. 4 [PIANO/VOICE] button ............pages 16, 18, 20 ) [PHONES] jacks .................................... page 11 For connecting a set of standard stereo headphones. For selecting a single Voice, two Voices for layering or a Reverb Type. 5 [METRONOME] button......................... page 14 For starting or stopping the metronome. 6 [+R], [–L] buttons ....................pages 16, 19, 23 • In general, these are for selecting the next or ! [USB TO HOST] terminal For connecting to a computer. For details, refer to “Computer-related Operations” (page 7). NOTICE Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used. previous Voice. • During Song playback, these are for selecting the next or previous Song, and (while holding down [PLAY]) turning on/off the right-hand and left-hand Parts individually. @ [TO PEDAL] jack ...................................page 29 For connecting the Pedal Cord. # DC IN jack..............................................page 10 For connecting the power adaptor. • During Metronome playback, these are for increasing or decreasing the Tempo. $ Pedals ....................................................page 13 For controlling expression and sustain, just as on an 7 [REC] button ......................................... page 24 For recording your keyboard performance. 8 YDP-S51 Owner’s Manual acoustic piano.  Basic Operations ENGLISH Setting Up Key Cover and Music Rest CAUTION Hold the key cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to avoid catching fingers (yours or others, especially children’s) between the key cover and main unit. Opening the key cover 1 2 Hold the ledge of the key cover top with both hands, then open the key cover slowly. Fold down the front part of the key cover. CAUTION Be careful to avoid catching your fingers when opening or closing the cover. 3 Unfold the music rest. Closing the key cover 1 2 3 Fold the music rest. Unfold the front part of the key cover. Hold the key cover with both hands and close it slowly. CAUTION CAUTION Be careful to avoid catching your fingers when opening or closing the cover. Before closing the key cover, be sure to fold the music rest and unfold the front part of the key cover. YDP-S51 Owner’s Manual 9  Basic Operations ENGLISH Turning the Power On 1 Connect one end of the power cord to the power adaptor. AC outlet Power adaptor 16V AC plug DC plug Power cord (The shape of the plug and outlet differ depending on locale.) WARNING Use the specified adaptor (page 31) only. The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. CAUTION Remove the AC plug from the AC outlet when the instrument is not to be used for extended periods of time, or during electrical storms. 2 3 4 Connect the power adaptor’s DC plug to the instrument’s DC IN jack (page 8) on the rear panel. Connect the other end (normal AC plug) to the AC outlet. Press the [ ] (Standby/On) switch to turn the power on. (Standby/On) switch Power indicator Power indicator If you close the key cover without turning the power to standby, the power indicator remains lit, indicating that the power is still on. When you’re ready to turn the power to standby, press the [ indicator turns off. ] (Standby/On) switch again for a second. The power CAUTION Even when the [ ] (Standby/On) switch is in the standby status, electricity is still flowing to the instrument at a minimum level. When not using the instrument for an extended period of time, be sure to unplug the power cord from the wall AC outlet. 10 YDP-S51 Owner’s Manual  Basic Operations To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automatically turns the power off if the instrument is not operated for approximately 30 minutes. If you do not want to use the Auto Power Off function, disable the function as described below. The setting (disabled or enabled) is retained even if the power is turned off. ENGLISH Auto Power Off NOTE Default setting: Enable Disabling Auto Power Off Turn the power of the instrument off. Then, while holding down the lowest key, press the [ ] (Standby/On) switch to turn on the power again so that the [REC] indicator flashes three times, indicating that the Auto Power Off function has been disabled. Lowest key You can also disable the Auto Power Off function without turning the power off, by simultaneously holding down [DEMO/SONG]  and [PIANO/VOICE] and pressing the A 5 key.  A5 Highest key Re-enabling Auto Power Off To enable the Auto Power Off function again, simultaneously hold down [DEMO/SONG] and [PIANO/VOICE] and press the A5 key. A5 Highest key Using Headphones Since this instrument is equipped with two [PHONES] jacks, you can connect two sets of standard stereo headphones. If you are using only one set of headphones, insert a plug into either jack, which automatically shuts off the speakers. Bottom surface CAUTION PHONES Do not use headphones at a high volume for an extended period of time; doing so may cause hearing loss. Standard stereo phone plug YDP-S51 Owner’s Manual 11  Basic Operations ENGLISH Playing the Piano Setting the Volume When you start playing, use the [MASTER VOLUME] knob to adjust the volume of the entire keyboard sound. Level decreases. Level increases. CAUTION Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged. Intelligent Acoustic Control (I.A.C.) With this function, the sound quality of this instrument is automatically adjusted and controlled according to the overall volume. Even when the volume is low, this lets you hear both low sounds and high sounds clearly. Default setting: On To turn on I.A.C.: While holding down [PIANO/VOICE], press  the F 0 key. F#0 Lowest key To turn off I.A.C.: While holding down [PIANO/VOICE], press the F0 key. Lowest key To adjust I.A.C. Depth: While holding down [PIANO/VOICE] press  one of the A-1 - D 0 keys. A-1: depth –3 Lowest key F0  D 0: depth +3 C0: depth 0 The higher the value, the more clearly that low and high sounds are heard at lower volume levels. Setting range:  A-1 (–3) ~ D 0 (+3) Default Setting: C0 (0) 12 YDP-S51 Owner’s Manual  Basic Operations Damper Pedal (Right) Pressing this pedal will sustain notes longer. Releasing this pedal immediately stops (damps) any sustained notes. This pedal also features a “half-pedal” function that creates partial sustain effects, depending on how far down you press the pedal. NOTE      If the damper pedal doesn’t work, make sure that the pedal cord is properly plugged into the main unit (page 29). When you press the damper pedal here, this note and the notes you play before you release the pedal sustain longer. Sostenuto Pedal (Center) Pressing this pedal while holding the notes will sustain the pressed notes (as if the Damper Pedal had been pressed), but all subsequently played notes will not be sustained. This makes it possible to sustain a chord or single low note, for example, while the other notes are played “staccato.” When you press the sostenuto pedal here while holding the note, the note will sustain as long as you hold the pedal. ENGLISH Using the Pedals Half-pedal function This function allows you to vary the sustain length depending on how far the pedal is pressed. The farther down you press the pedal, the more the sound sustains. For example, if you press the damper pedal and all notes you are playing sound a bit murky and loud with too much sustain, you can release the pedal half way or higher to decrease the sustain (murkiness). Soft Pedal (Left) NOTE Pressing this pedal will reduce the volume and slightly change the timbre of the notes. The notes played before this pedal is pressed are not affected. When you select the Jazz Organ Voice, pressing the left pedal switches between fast/slow rotation of the rotary speaker (page 16). While the sostenuto pedal is held, the organ and strings Voices sound continuously without decay after the notes have been released. Using the Damper Resonance The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you were pressing the damper pedal and playing the keyboard. This effect is applied to the entire sound of the instrument. To turn on the Damper Resonance: Default setting: On  While holding [PIANO/VOICE], press the G 2 key. To turn off the Damper Resonance: While holding [PIANO/VOICE], press the G2 key. Lowest key G2 (Off)  G2 (On) YDP-S51 Owner’s Manual 13  Basic Operations ENGLISH Using the Metronome The metronome feature is convenient for practicing with an accurate tempo. 1 2 Press [METRONOME] to start the Metronome. Press [METRONOME] to stop the Metronome. Adjusting the Metronome Volume Selecting a Beat   C3 D3 2 4 7 9 11 14 16 C1 G2  A4 C5 1 3 19 1 3 5 6 8 10 12 13 15 17 18 20 Lowest key Adjusting the Tempo  6 8 0 2 4 5 7 9 C3 D3 E3 F3 C4 F4 A4 B4 C5 D5 Highest key Selecting a Beat While holding down [METRONOME], press one of the C3-F3 keys. Key Beat C3  C3 0 D3  D3 3 E3 5 F3 6 Default setting: 0 (C3) 2 4 Adjusting the Tempo The Metronome tempo can be set from 5 to 280 beats per minute. To increase or decrease the value by 1: While the metronome is playing, press [+R] to increase or [–L] to decrease. Alternatively,  press and hold down [METRONOME], and press the C 5 key to increase or B4 key to decrease. To increase or decrease the value by 10:  While holding down [METRONOME], press the D5 key to increase or the A 4 key to decrease. To specify a three-digit value: While holding down [METRONOME], press the relevant C4–A4 keys one by one in order. For example to specify “95,” press the C4 (0), A4 (9) and F4 (5) keys in order. Resetting the value to the default (120) While holding down [METRONOME], press the [+R] and [–L] simultaneously, or press the C5 (default) key. Adjusting the Volume While holding down [METRONOME], press one of the keys between C1 and G2 to set the volume of the metronome. Pressing a higher key results in higher volume, while pressing a lower key results in lower volume. 14 YDP-S51 Owner’s Manual Setting range: C1 (1) ~ G2 (20) Default setting: D2 (15)  Basic Operations You can specify the Touch Sensitivity (how the sound responds to the way you play the keys). While holding down [PIANO/VOICE], press one of the A6-C7 keys.  NOTE A6 This setting is disabled with some Voices, such as an organ sound. A6 C7 B6 ENGLISH Changing the Touch Sensitivity Default setting: B6 (Medium) Key Touch Sensitivity Description A6 Fixed The volume level does not change at all regardless of whether you play the keyboard soft or hard.  A6 Soft B6 Medium C7 Hard The volume level does not change much when you play the keyboard soft or hard. This is the standard piano touch response. The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic and dramatic expression. You have to hit the keys hard to produce a loud sound. Maintenance To keep your ARIUS in optimum condition, we recommend that you periodically follow the maintenance points below. Instrument and Bench Maintenance • When cleaning the instrument, use a soft, dry or slightly damp cloth. NOTICE Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. Gently remove dust and dirt with a soft cloth. Do not wipe too hard since small particles of dirt can scratch the instrument’s finish. • Tighten the screws of the instrument and bench periodically. Pedal Cleaning As with an acoustic piano, pedals may become tarnished over years of use. When this occurs, polish the pedal with a compound designed for piano pedals. Before using the compound, make sure to read the instructions for proper usage. Tuning Unlike an acoustic piano, this instrument does not need to be tuned by an expert (although the pitch can be user-adjusted to match other instruments). This is because the pitch of digital instruments is always maintained perfectly. When transporting You can load this instrument onto a truck, either fully assembled or disassembled. When doing so, do not lean the instrument (especially the keyboard unit) against a wall, and make sure to lay it horizontally in the truck. When transporting by truck, do not subject the instrument to excessive vibration or shock. If you transport the instrument fully assembled, make sure to check all the screws then tighten them as necessary. YDP-S51 Owner’s Manual 15  ENGLISH Advanced Operations Playing Various Musical Instrument Sounds (Voices) Selecting a Voice To select “Grand Piano 1”: NOTE Simply press [PIANO/VOICE]. To hear the characteristics of the Voices, play back the Demo Songs (page 17). To select another Voice: After pressing [PIANO/VOICE], press [+R] or [–L] to select the next or previous Voice. To select a specific Voice: While holding down [PIANO/VOICE], press one of the C1–A1 keys. For details on which Voice is assigned to each key, see the list below.  C1 Lowest key   D1 F1  G1 C1 D1 E1 F1 G1 A1 Voice List 16 Key Voice Name C1 Grand Piano 1  C1 Voice description This sound was sampled from a full concert grand piano. It uses different samples depending on the strength of your playing and produces smoother tonal changes. Suitable not only for classical compositions but also for piano pieces of any style. Grand Piano 2 Warm and soft piano sound. Good for playing ballads. D1  D1 Grand Piano 3 Spacious and clear piano with bright reverb. Good for popular music. E.Piano 1 An electronic piano sound created by FM synthesis. Good for standard popular music. E1 E.Piano 2 The sound of an electric piano using hammer-struck metallic “tines.” Soft tone when played lightly, and an aggressive tone when played hard. F1 Harpsichord The definitive instrument for baroque music. Since harpsichord uses plucked strings, there is no touch response. There is, however, a characteristic additional sound when the keys are released.  F1 Vibraphone Vibraphone played with relatively soft mallets. The tone becomes more metallic the harder you play. G1 Pipe Organ This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music from the Baroque period.  G1 Jazz Organ The sound of a “tonewheel” type electric organ. Often heard in jazz and rock music. The rotary speed of the rotary speaker effect can be switched by using the left pedal. A1 Strings Stereo-sampled, large-scale strings ensemble with realistic reverb. Try combining this Voice with piano in the Dual mode. YDP-S51 Owner’s Manual  Advanced Operations Special individual Demo Songs are provided for all of the instrument Voices. 1 NOTE Press [DEMO/SONG] to start playback. If you want to change the playback tempo, see page 14. The [PLAY] lamp lights up, and the Demo Song for the current Voice starts. Starting with the selected song, the playback of the Demo Songs will continue. After the last demo song, the sequence then returns to the first Demo Song and repeats until you stop it. ENGLISH Listening to the Demo Songs To change the Demo Song during playback: Press the [+R] or [–L] to change to the next or previous Demo Song. To change to a specific Demo Song, press and hold down the [DEMO/SONG], then press one of the C1 - A1 keys. Lowest key 2 C1 F1 A1 Press [DEMO/SONG] or [PLAY] to stop playback. The [PLAY] lamp turns off. Demo Song List Key Voice Name Title Composer C1  C1 Grand Piano 1 Mazurka No.5 op.7-1 F. F. Chopin Grand Piano 2 Von fremden Landern und Menchen, Kinderszenen op.15-1 R. Schumann D1  D1 Grand Piano 3 Original Original E.Piano 1 Original Original E1 E.Piano 2 Original Original F1 Harpsichord Concerto a cembalo obbligato, 2 violini, viola e continuo No.7, BWV.1058 J. S. Bach  F1 Vibraphone Original Original G1  G1 Pipe Organ Herr Christ, der ein'ge Gottes-Sohn, BWV.601 J.S.Bach Jazz Organ Original Original A1 Strings Original Original The Demo Songs excluding original Songs are short rearranged excerpts from the original compositions. The original Demo Songs are Yamaha originals (©2012 Yamaha Corporation). YDP-S51 Owner’s Manual 17  Advanced Operations ENGLISH Adding Variations to the Sound (Reverb) This instrument features several Reverb Types that add extra depth and expression to the sound to create a realistic acoustic ambience. The appropriate Reverb Type and Depth are called up automatically when you select each of the Voices and Songs. This is why the Reverb Type need not be selected; however, you can change it if desired. To select a Reverb Type: NOTE While holding down [PIANO/VOICE], press one of the C2–E2 keys. In Dual mode (page 20), the Reverb Type of Voice 1 is called up. If the Type of Voice 1 is set to Off, the Reverb Type of Voice 2 is called up and used for both Voices. Selecting a Reverb Type   C2 Lowest key Adjusting Reverb Depth  D2 C2 D2 E2 G 4: depth 20 C3: depth 0 Highest key A4 The depth value increases as you press higher keys. Reverb Type List Key Reverb Type Description C2 Room Adds a continuous reverb effect to the sound, similar to the acoustic reverberation you would hear in a room.  C2 Hall1 For a “bigger” reverb sound, use the Hall1 setting. This effect simulates the natural reverberation of a small-size concert hall. D2 Hall2 For a truly spacious reverb sound, use the Hall2 setting. This effect simulates the natural reverberation of a large concert hall.  D2 Stage Simulates the reverb of a stage environment. E2 Off No effect is applied. To adjust Reverb Depth:  While holding down [PIANO/VOICE], press one of the C3–G 4 keys. The Depth value increases as you press higher keys. While holding down [PIANO/VOICE], press the A4 key to set the Reverb Depth to the most suitable value for the current Voice. 18 YDP-S51 Owner’s Manual Reverb Depth range: 0 (no effect) - 20 (maximum depth)  Advanced Operations To transpose the pitch down:  While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between F 2 (–6) and B2 (–1). ENGLISH Transposing the Pitch in Semitones You can shift the pitch of the entire keyboard up or down in semitones in order to facilitate playing in difficult key signatures, or to easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if “+5” is selected, playing key C produces pitch F, letting you play a song of F major as though it were in C major. To transpose the pitch up:   While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between C 3 (+1) and F 3 (+6). To restore the normal pitch: While holding down [DEMO/SONG] and [PIANO/VOICE], press the C3 key.  F2 -6 -4 -2  C3 F3 +1 +3 +6 -5 -3 -1 0 +2 +4 +5 Transpose down Lowest key Transpose up Normal pitch Fine-tuning the Pitch You can fine-tune the pitch of the entire instrument in about 0.2 Hz steps. This lets you match the keyboard pitch finely to that of other instruments or CD music. To tune up (in about 0.2 Hz steps): Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press [+R]. Hz (Hertz): This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. Setting range: To tune down (in about 0.2 Hz steps): 414.8 – 466.8 Hz Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press [–L]. Default Setting: A3 = 440.0 Hz To set the pitch to 442.0 Hz: Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press the A0 key. Lowest key A0 To restore default pitch: Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press [+R] and [–L] simultaneously. YDP-S51 Owner’s Manual 19  Advanced Operations ENGLISH Layering Two Voices (Dual mode) You can layer two Voices and play them simultaneously to create a more richly textured sound. 1 Engage the Dual mode. While holding down [PIANO/VOICE], simultaneously hold down two keys between C1 and A1 to select the two desired Voices. For information on which Voices are assigned to the keys, refer to “Voice List” (page 16). Adjusting the balance Engaging Dual mode C5 F5 0 -1  F 5 C6 -6 -4 -2 +1 +3  F6 +6 -1 +1 0 +1 -5 -3 -1 0 +2 +4 +5 Lowest key C1 F1 A1 Voice 1 Voice 2 Highest key Shifting the octave The Voice assigned to the lower key will be designated as Voice 1, and the Voice assigned to the higher key will be designated as Voice 2. You cannot assign the same Voice to both Voice 1 and Voice 2 simultaneously in Dual mode. To shift the Octave for each Voice: While holding down [PIANO/VOICE], press one of the C5-F5 keys. To adjust the Balance between two Voices:   While holding down [PIANO/VOICE], press one of the F 5–F 6 keys. A setting of “0” produces an equal balance between two Voices. Settings below “0” increase the volume of Voice 2 while settings above “0” increase the volume of Voice1, in relation to the other. 2 20 To exit from Dual mode, press [PIANO/VOICE]. YDP-S51 Owner’s Manual NOTE The Dual and Duo modes (page 21) cannot be engaged at the same time.  Advanced Operations This function allows two different players to play the instrument, one on the left and the other on the right, over the same octave range. 1 While holding down [PIANO/VOICE], press [+R] and [–L] ENGLISH Playing Duo simultaneously to engage Duo. The keyboard is divided into two sections, with the E3 key as the Split Point. Equivalent to C3 (middle C) Split Point E3 Left Voice (Voice 2) 2 Equivalent to C3 (middle C) Right Voice (Voice 1) One person should play the left section of the keyboard while NOTE the other plays the right. The Split Point cannot be changed from E3. To shift the Octave for each Voice: Same operation as in Dual (page 20). To adjust the volume balance between two keyboard sections: Same operation as in Dual (page 20). Pedal function in Duo NOTE If the keyboard is in Dual, engaging Duo will exit from Dual. The Voice 1 is used as the Voice of the entire keyboard. • Damper Pedal: Applies Sustain to the right section. • Sostenuto Pedal: Applies Sustain to both sections. • Soft Pedal: Applies Sustain to the left section. 3 To exit from Duo, simultaneously hold down [PIANO/VOICE] and press [+R] and [–L]. YDP-S51 Owner’s Manual 21  Advanced Operations ENGLISH Song Playback and Practice Listening to 50 Preset Songs In addition to the Demo Songs, Preset Songs are provided for your listening pleasure. 1 Find the number of the Song that you want to play back from the included “50 greats for the Piano.”  The number of each piano Preset Song is assigned to the C2–C 6 keys. 2  While holding down [DEMO/SONG], press one of the C2–C 6 keys to start playback. Song 1 Song 10 Song 20 Song 30 Song 40  Song 50 (C 6) NOTE You can play the keyboard along with the preset Song. You can also change the Voice playing on the keyboard. C2 C3 C4 C5 Highest key (C7) The [PLAY], [+R] and [–L] lamps light, and playback continues the sequence: starting with the selected song, the playback of the Preset Songs will continue. After the last Preset Song, the sequence then returns to the first Preset Song and repeats until you stop it. To change the Preset Song during playback: NOTE Press [+R] or [–L] to change to the next or previous Preset Song. You can import additional Songs by loading SMF files from a computer. For details, refer to the Computer-related Operations manual (page 7). To change the tempo during playback: Press [METRONOME] to start the Metronome, then press [+R] or [–L] to increase or decrease the Tempo value by 1. Other instructions are same as those of the Metronome Tempo (page 14). To play back from the beginning of the Song at the desired tempo for practice: During playback, press [+R] and [–L] simultaneously to jump to the playback position at the beginning of the Song then continue playback at the last specified tempo. 3 Press [DEMO/SONG] or [PLAY] to stop playback. The [PLAY], [+R] and [–L] lamps turn off. 22 YDP-S51 Owner’s Manual  Advanced Operations 1 2 Select a Preset Song (page 22) or the User Song (page 24). NOTE ENGLISH Practicing a One-Hand Part All the Songs except for the Demo (page 17) let you turn on or off the left-hand and right-hand Parts individually. By turning off [+R], for example, you can practice the right-hand Part while the left-hand Part is playing back, and vice versa. Selecting another Song will reset the on/off status. While holding down [PLAY], press [+R] or [–L] to turn the Part on/off. Pressing the same button repeatedly while holding down [PLAY] toggles playback on and off. The lamp of the button lights to indicate that the corresponding Part is on. or Lamp lights when Part is on. 3 Practice the Part which is turned off. To change the Tempo: If desired, you can change the tempo for your practice convenience. For details, refer to page 14. 4 Press [PLAY] to stop playback. Playing from the top of the bar including a rest or blank This Quick Play feature enables you to specify whether a Song should play back immediately from the very first note, or play back any silence or rests that exist before the first note. NOTE Default setting: On To turn on Quick Play:  Hold down [DEMO/SONG] and press the A -1 key to enable immediate playback from the first note or first pedal operation.  A -1 Lowest key To turn off Quick Play: Hold down [DEMO/SONG] and press the lowest key (A-1) to play from the top of the first measure (including a rest or blank). Lowest key A-1 YDP-S51 Owner’s Manual 23  Advanced Operations ENGLISH Recording Your Performance This instrument lets you record your keyboard performance as the User Song. Up to two Parts (left-hand and right-hand) can be recorded separately. Recording Your Performance 1 Select the desired Voice and other parameters, such as beat, for recording. For instructions on selecting a Voice, refer to page 16. If necessary, set other parameters, such as beat and effects, in this step. 2 While holding down [REC], press [+R] or [–L] to engage Record Ready mode for the Part you want to record. If you do not intend to record right- and left-hand Parts separately, record the entire performance to either Part. Recording the right-hand Part ([+R]) Recording Capacity This instrument can record up to 100KB (approximately 11,000 notes). NOTE You can use the Metronome while recording; however, the Metronome sound will not be recorded. NOTICE If a Part contains data, the Part lamp lights. Note that the Recording operation will replace already-recorded data with the new data. or Recording the left-hand Part ([–L]) After a while, the [REC] lamp and the selected Part lamp will flash at the current tempo. To exit from Record Ready mode: Simply press [REC]. If data has already been recorded to the other Part: The data in this Part will be played back while recording. This Part can be turned off or on by holding down [PLAY] then pressing this Part button. 3 Play the keyboard or press [PLAY] to start recording. The [REC] lamp lights up while the Recording Part lamp flashes at the current tempo. 4 Press either [REC] or [PLAY] to stop recording. The [REC], [PLAY], [+R] and [–L] lamps flash, indicating that the recorded data is being stored. After the Save operation is completed, the lamps will turn off, indicating that the Record operation has been completed. 24 YDP-S51 Owner’s Manual NOTICE Never turn off the power while the recorded data is being stored (while the lamps are flashing). Otherwise, all recorded data will be lost.  5 If desired, record the other Part by repeating Steps 1–4. 6 To hear the recorded Song, press [PLAY] to start playback. Press [PLAY] again to stop playback. NOTE The recorded Song data can be saved to computer as a Standard MIDI file (SMF). For details, refer to the Computerrelated Operations manual (page 7). ENGLISH Advanced Operations Changing the Initial Settings of the Recorded Song The settings of the following parameters can be changed after the Record operation is completed. - For individual Parts: Voice, Dual Voices, Reverb Depth - For the entire Song: Tempo, Reverb Type 1 2 Make the settings of the above parameters. While holding down [REC], press the desired Part button to engage Record Ready mode. In this status, do not press [PLAY] again or any key. Otherwise, the originally recorded performance data will be deleted. 3 Press [REC]+[PLAY] again to exit from Record Ready mode. Deleting Recorded Data To delete the entire Song: 1 While holding down [REC], press [DEMO/SONG]. The [+R] and [–L] lamps flash. To exit from this status, press [–L]. 2 Press [+R] to delete the data of the entire Song. The [REC], [PLAY], [+R] and [–L] lamps flash. After the operation is completed, all lamps turn off. To delete a specific Part: 1 While holding down [REC], press [+R] or [–L] (depending on the Part you want to delete) to engage Record Ready mode. The [REC] and the selected Part ([+R] or [–L]) lamps flash. 2 Press [PLAY] to start recording without playing the keyboard. The selected Part ([+R] or [–L]) lamp flashes. 3 Press [REC] or [PLAY] to stop recording. All data recorded for the selected Part will be deleted, and the lamp turns off. YDP-S51 Owner’s Manual 25  Advanced Operations ENGLISH Data Maintained When Power is Turned Off The following settings and data are maintained even if you turn the power off. • Metronome Volume • Metronome Beat • Touch Sensitivity • Tuning • Intelligent Acoustic Control Depth • Intelligent Acoustic Control On/Off • Auto Power Off Enable/Disable • User Song data • Song data (SMF Files) loaded from a computer Saving the User Song data to a computer Among the data listed above, only the User Song data can be transferred to a computer and saved as a SMF file. For details, refer to “Computer-related Operations” on the website (page 7). NOTICE Saved data may be lost due to malfunction or incorrect operation. Save important data to an external device such as a computer. Transferring SMF Files Between a Computer and this Instrument With Musicsoft Downloader (available for free downloading), up to 10 SMF files can be transferred from the computer to the internal memory of this instrument, and vice versa. For details, refer to the “Computer-related Operations” downloadable from Yamaha Manual Library (page 7). Initializing the Settings With this operation, all data (with the exception of the Songs) will be reset to the factory default settings. To do this, simultaneously hold down the C7 (the highest) key and turn on the power. C7 NOTICE Never turn off the power while the Initialize operation is being executed (that is, while the [REC] and [PLAY] lamps are flashing). NOTE Highest key 26 YDP-S51 Owner’s Manual If this instrument somehow becomes disabled or malfunctions, turn off the power then execute Initialization.  Appendix Problem Possible Cause and Solution Power suddenly and unexpectedly turns off. This is normal and the Auto Power Off function may have been activated (page 11). If desired, disable the Auto Power Off function. The instrument does not turn on. Securely insert the adaptor plug into the socket on this instrument, and the adaptor plug into a proper AC outlet (page 10). A click or pop is heard when the power is turned on or off. This is normal when electrical current is being applied to the instrument. Noise is heard from the speakers or headphones. The noise may be due to interference caused by the use of a mobile phone in close proximity to this instrument. Turn off the mobile phone, or move it further away from this instrument. ENGLISH Troubleshooting The Master Volume is set too low. Set it to an appropriate level using the [MASTER VOLUME] knob (page 12). The overall volume is low, or no sound is heard. Make sure a pair of headphones is not connected to the headphones jack (page 11). Make sure that Local Control is On. Pedals do not function. The pedal cord may not be securely connected to the [TO PEDAL] jack. Be sure to insert the pedal cord all the way until the metal part of the cord plug disappears from view (page 30). The damper pedal does not function as expected. The damper pedal was pressed when the power was turned on. This is not a malfunction; release the pedal and press it again to reset the function. YDP-S51 Owner’s Manual 27  Appendix ENGLISH Keyboard Stand Assembly CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least two persons. • Assemble the unit on a hard and flat floor with ample space. • Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage. • Be sure to tighten up all screws upon completing assembly of each unit. • To disassemble, reverse the assembly sequence given below. 1 Have a Phillips-head (+) screwdriver of the appropriate size ready. Attach (finger-tighten) C to D and E. 1-1 Untie and straighten out the bundled cord. Don’t discard the vinyl tie. You will need it later in step 6. Remove all parts from the package and make sure you have all of the items. 1-2 Align D and E with each end of C. 1-3 Attach D and E to C by finger-tightening the long screws 2 (6 x 20 mm). A 1-2 D B C E Bundled pedal cord inside E D C AC Power adaptor 1-3 * The two anti-fall brackets are identical. (Either one can be used for left or right.) * The adaptor may not be included, or may look different from the illustration above, depending on your particular area. Please check with your Yamaha dealer. Assembly Parts 1 6 x 25 mm long screws x 4 28 5 4 x 20 mm tapping screws x 2 2 6 x 20 mm long screws x 2 6 Caps x 2 3 6 x 16 mm short screws x 4 7 Cord holders x 2 4 4 x 12 mm thin screws x 2 8 Anti-fall brackets x 2 YDP-S51 Owner’s Manual 2 Attach B. 2-1 Attach the top of B to D and E by finger-tightening the thin screws 4 (4 x 12 mm). 2-2 While pressing on the lower part of D and E from the outside, attach the anti-fall brackets and then secure the bottom ends of B using four long screws 1 (6 x 25 mm). 2-3 Insert the other two tapping screws 5 (4 x 20 mm) into the other two screw holes to secure B.  Appendix E 5 Secure A. 5-1 Adjust the position of A so that the left and right ends of A will project beyond D and E equally when seen from the front. 5-2 Secure A by tightening the four short screws (3) (6 x 16 mm) from the bottom. 2-1, 2-4 5-1 D B ENGLISH 2-4 Securely tighten the screws on the top of B that were attached in Step 2-1. A Projection of A 2-2 2-2 2-3 A Secure the anti-fall brackets using the screws. 3 Secure C. 3-1 Securely tighten the screws on C that were attached in Step 1-3. 3-2 Attach the caps (6) to the head of the screws. 5-2 3-2 6 Connect the pedal cord. 6-1 Insert the pedal cord plug to the [TO PEDAL] jack from the rear. B D D C 6-3 Use a vinyl tie to take up any slack in the pedal cord. 3-1 4 6-2 Attach the cord holders to the rear panel as shown, then clip the cord into the holders. 6-1 Mount A. Be sure to place your hands at least 10 cm from either end of A when positioning it. At least 10 cm At least 10 cm A 6-2 D B E 6-3 Align the dowels on D and E with the corresponding holes on the bottom of A. CAUTION • Be careful not to pinch your fingers or drop the unit. • Do not hold the keyboard in any position other than Insert the pedal cord securely until the metal part of the cord plug disappears from view. Otherwise, the pedal may not function properly. Insert the cord all the way until the metal part of the plug disappears from view. the position shown in the illustration. YDP-S51 Owner’s Manual 29  Appendix 7 Connect the AC adaptor. ENGLISH 7-1 Insert the AC adaptor plug into the DC IN jack from the rear. For more information, refer to page 10. 7-1 After completing the assembly, please check the following. • Are there any parts left over? Review the assembly procedure and correct any errors. • Is this instrument clear of doors and other movable fixtures? Move the instrument to an appropriate location. • Does this instrument make a rattling noise when you shake it? Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals? Turn the adjuster so that it is set firmly against the floor. • Are the pedal and power cords inserted securely into the sockets? Check the connection. • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. 8 Set the adjuster. CAUTION • When moving the instrument after assembly, always hold the bottom of the main unit. • Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. Rotate the adjuster until it comes in firm contact with the floor surface. Do not hold here. Hold here. 30 YDP-S51 Owner’s Manual  Appendix Size Storage (Internal Memory) • Width: 1353 mm [53-1/4" ] • User Song: One song approx. 100KB • Height (Key cover open): • Loading song data from a computer (Up to 10 songs): 783 mm [30-7/8" ] (970 mm [38-3/16" ] ) • Depth (Key cover open): 309 mm [12-1/8" ]* (315 mm [12-3/8"]) * With anti-fall brackets attached, the depth is 404 mm [15-7/8"]. Weight • 36 kg (79 lbs., 6 oz.) Keyboards • 88 keys • GH (Graded Hammer) keyboard • Touch Sensitivity (Hard/Medium/Soft/Fixed) Pedal • Number of Pedals: 3 (Damper, Sostenuto, Soft) • Half Pedal: Yes (Damper) Panel Language • English Key Cover Style • Folding Music Rest • Built into the Key Cover Voices • Tone Generation Technology: Pure CF Sound Engine • Number of Polyphony (Max.): 128 • 10 Preset Voices Effects/Functions Total maximum size approx. 900KB Connectivity • Headphones × 2 • USB TO HOST Amplifiers • 20 W × 2 Speakers • Oval (12 cm × 6 cm) × 2 Sound System • Acoustic Optimizer Power Supply • AC Power adaptor PA-300C or an equivalent recommended by Yamaha Power Consumption • * 14 W (when using the PA-300C) Auto Power Off Function • Approximately 30 minutes Included Accessories • Owner’s Manual, Quick Operation Guide, “50 Greats for the Piano” (Music Book), AC Power adaptor*, Online Member Product Registration * May not be included depending on your particular area. Please check with your Yamaha dealer. Options (may not be available depending on your particular area) • 4 Reverb types • BC-100 bench • Damper Resonance • HPE-150 headphones • Dual • AC Power adaptor PA-300C or an equivalent recom- • Duo ENGLISH Specifications mended by Yamaha • Intelligent Acoustic Control Preset Songs • 10 Demo Songs + 50 Preset Songs Song Recording • 1 User Song with 2 tracks * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. • 1 Song (approx. 100KB: approx. 11,000 notes) Compatible Data Format • Playback: Standard MIDI File (SMF) Format 0 & 1 • Recording: Standard MIDI File (SMF) Format 0 Overall Controls • Metronome: 5 - 280 (tempo range) • Transpose: –6 - 0 - +6 • Tuning: 414.8 - 466.8 Hz YDP-S51 Owner’s Manual 31  Appendix ENGLISH Index Numerics O 50 Preset Songs .......................................................22 Octave .................................................................... 20 Online Manuals (PDF) ................................................. 7 A AC Power adaptor ......................................................7 Accessories ...............................................................7 Assembly .................................................................28 Auto Power Off .........................................................11 B Beat ........................................................................14 C Panel Controls and Terminals ....................................... 8 Pedals ..................................................................... 13 Pitch ....................................................................... 19 Power ...................................................................... 10 Power indicator ........................................................ 10 Practice ................................................................... 23 Preset Songs ............................................................ 22 Computer-related Operations .......................................7 Q D Quick Operation Guide ............................................... 7 Quick Play ............................................................... 23 Damper Pedal ..........................................................13 Damper Resonance ..................................................13 Delete ......................................................................25 Demo Song List ........................................................17 Demo Songs ............................................................17 Dual mode ...............................................................20 Duo .........................................................................21 H Half-pedal ................................................................13 Headphones ............................................................11 Hz (Hertz) ................................................................19 I Initializing .................................................................26 Intelligent Acoustic Control (I.A.C.) .............................12 K Key Cover ..................................................................9 Keyboard Stand Assembly .........................................28 L Left-hand Part ..........................................................23 M Maintenance ............................................................15 Manuals .....................................................................7 Metronome ...............................................................14 MIDI Basics ................................................................7 MIDI Reference ..........................................................7 Music Rest .................................................................9 32 P YDP-S51 Owner’s Manual R Recording ................................................................ 24 Reverb .................................................................... 18 Reverb Depth ........................................................... 18 Reverb Type ............................................................ 18 Reverb Type List ...................................................... 18 Right-hand Part ........................................................ 23 S Soft Pedal ................................................................ 13 Sostenuto Pedal ....................................................... 13 Specifications .......................................................... 31 T Tempo ..................................................................... 14 Touch Sensitivity ....................................................... 15 Transpose ............................................................... 19 Troubleshooting ....................................................... 27 Tuning ............................................................... 15, 19 U USB TO HOST ............................................................ 8 User Song ............................................................... 24 V Voice ....................................................................... 16 Voice List ................................................................. 16 Volume .............................................................. 12, 14  YDP-S51 Owner’s Manual 13  The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at the bottom of the unit. You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. Model No. El número de modelo, el número de serie, los requisitos de alimentación, etc. pueden encontrarse en la placa de identificación o cerca de ella. Esta placa se encuentra en la parte inferior de la unidad. Debe anotar dicho número en el espacio proporcionado a continuación y conservar este manual como comprobante permanente de su compra para facilitar la identificación en caso de robo. Nº de modelo Serial No. (bottom_en_01) Nº de serie Le numéro de modèle, le numéro de série, l’alimentation requise, etc., se trouvent sur ou près de la plaque signalétique du produit, située dans la partie inférieure de l’unité. Notez le numéro de série dans l’espace fourni ci-dessous et conservez ce manuel en tant que preuve permanente de votre achat afin de faciliter l’identification du produit en cas de vol. (bottom_es_01) N° de modèle N° de série (bottom_fr_01) Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. (weee_eu) Information concernant la Collecte et le Traitement des déchets d’équipements électriques et électroniques. Le symbole sur les produits, l’emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels. Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques, veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives 2002/96/EC. En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauvegarde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors d’un traitement inapproprié des déchets. Pour plus d’informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques, veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les produits. [Pour les professionnels dans l’Union Européenne] Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques veuillez contacter votre vendeur ou fournisseur pour plus d’informations. [Information sur le traitement dans d’autres pays en dehors de l’Union Européenne] Ce symbole est seulement valables dans l’Union Européenne. Si vous souhaitez vous débarrasser de déchets d’équipements électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement appropriée. (weee_eu) Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usados no deben ser mezclados con desechos hogareños corrientes. Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de acuerdo a su legislación nacional y las directivas 2002/96/EC. Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto negativo sobre la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos. Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio de gestión de residuos o el punto de venta en el cual usted adquirió los artículos. [Para usuarios de negocios en la Unión Europea] Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor para mayor información. [Información sobre la Disposición en otros países fuera de la Unión Europea] Este símbolo sólo es válidos en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autoridades locales y pregunte por el método correcto de disposición. (weee_eu) YDP-S51 Owner’s Manual  YDP-S51 Owner’s Manual  YDP-S51 Owner’s Manual  Yamaha Global Site http://www.yamaha.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ U.R.G., Digital Musical Instruments Division © 2012 Yamaha Corporation 210APZC*.*-01B0 Printed in Indonesia ZA89610