Oaks Aura DC5204 Handleiding

Type
Handleiding
1.Fix three fan blades on the motor with fan blade screws
2. Take three screws from the connecting plate of the motor,
Use these three screws to secure the light pan to the motor
1. Connect the input wires of the LED light pan driver to the wire
coming out of the bottom of the motor through sockets at the tail.
2. The light belt is equipped with magnetic stripes. After wiring,
the belt can be tightly attached to the motor.
1.Put the shade into the light plate and twist it tight.
Ensure that the shade is securely tightened,
otherwise the shade will fall off and break if not properly installed.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Oaks Aura DC5204 Handleiding

Type
Handleiding

in andere talen