Yamaha CMA3SB de handleiding

Merk: Yamaha

Model: CMA3SB

Type: de handleiding

Deze handleiding is ook geschikt voor

EnglishDeutsch

Français

Español

Português

ItalianoРусский

Owner’s Manual

Bedienungsanleitung

Mode d’emploi

Manual de instrucciones

Manual do Proprietário

Manuale di istruzioni

Руководство пользователя

SPEAKER SYSTEM

XS3SB

XS3SW

CMA3SB

CMA3SW

SPEAKER ACCESSORY

ֵ⭞䈪᱄Ҝ

ѣᮽ

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

PLEASE READ CAREFULLY BEFORE

PROCEEDING

Please keep this manual in a safe place for

future reference.

WARNING

Always follow the basic precautions listed

below to avoid the possibility of serious

injury or even death from electrical shock,

short-circuiting, damages, fire or other

hazards. These precautions include, but are

not limited to, the following:

Do not open

• This device contains no user-serviceable

parts. Do not open the device or attempt

to disassemble the internal parts or modify

them in any way. If it should appear to be

malfunctioning, discontinue use immediately

and have it inspected by qualiﬁed Yamaha

service personnel.

Water warning

• Do not expose the device to rain, use it

near water or in damp or wet conditions.

If any liquid such as water seeps into the

device, turn off the power of the ampliﬁer

immediately. Then have the device inspected

by qualiﬁed Yamaha service personnel.

Hearing loss

• When turning on the AC power in your audio

system, always turn on the power ampliﬁer

LAST, to avoid hearing loss and speaker

damage. When turning the power off, the

power ampliﬁer should be turned off FIRST

for the same reason.

Fire warning

• Do not place any burning items or open

ﬂames near the device, since they may

cause a ﬁre.

If you notice any abnormality

• If any of the following problems occur,

immediately turn off the power of the

ampliﬁer.

- Unusual smells or smoke are emitted.

- Some object has been dropped into the

device.

- There is a sudden loss of sound during use

of the device.

- Cracks or other visible damage appear on

the device.

Then have the device inspected or repaired

by qualiﬁed Yamaha service personnel.

CAUTION

Always follow the basic precautions listed

below to avoid the possibility of physical

injury to you or others, or damage to the

device or other property. These precautions

include, but are not limited to, the following:

Location

• Do not place the device in an unstable

position where it might accidentally fall over

and cause injuries.

• Do not place the device in a location where it

PRECAUTIONS

may come into contact with corrosive gases

or salt air. Doing so may result in malfunction.

• Avoid being near the device during a

disaster, such as an earthquake. Since the

device may fall and cause injury, stay away

from the device quickly and move to a safe

place.

• Before moving the device, remove all

connected cables.

• Be sure to contact a professional installer, if

the speaker installation requires construction

work, and make sure to observe the following

precautions.

- Choose mounting hardware and an

installation location that can support the

weight of the device.

- Avoid locations that are exposed to

constant vibration.

- Use the required tools to install the device.

- Inspect the device periodically.

Connections

• Use only speaker cables for connecting

speakers to the speaker jacks. Use of other

types of cables may result in ﬁre.

Handling caution

• Do not place heavy objects on it. Avoid

applying excessive force to the buttons,

switches or connectors to prevent injuries.

• Do not operate the device if the sound is

distorting. Prolonged use in this condition

could cause overheating and result in ﬁre.

PA-8 1/2

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

PRECAUTIONS

• Do not input excessively loud signals that

may result in clipping in the ampliﬁer or

cause the following:

- Feedback, when using a microphone

- Continuous and extremely loud sound from

a musical instrument, etc.

- Continuous and excessively loud distorted

sound

- Noise caused by plugging/unplugging the

cable while the ampliﬁer is turned on

Even if the output power of the ampliﬁer

is lower than the power capacity of this

device (program), damage to the device,

malfunction or ﬁre may occur.

• When choosing a power ampliﬁer for use

with this device, make sure that the output

power of the ampliﬁer is lower than the power

capacity of this device (see Owner’s Manual).

If the output power is higher than the power

capacity, malfunction or ﬁre may occur.

Yamaha cannot be held responsible for

damage caused by improper use or

modifications to the device.

PA-8 2/2

NOTICE

To avoid the possibility of malfunction/ damage

to the product, or damage to other property,

follow the notices below.

Handling and maintenance

When using a high-impedance speaker

connection, make sure the audio signal is

passed through an 60 Hz or above high-pass

filter before being input to the speakers.

Do not install the device to excessive dust or

vibration, or extreme cold or heat (such as in

direct sunlight, near a heater, or in a car during

the day), in order to prevent the possibility

of panel disfiguration, unstable operation, or

damage to the internal components.

Do not place vinyl, plastic or rubber objects on

the device, since this might discolor the device.

When cleaning the device, use a dry and soft

cloth. Do not use paint thinners, solvents,

cleaning fluids, or chemical-impregnated

wiping cloths.

Be sure to observe the amplifier’s rated load

impedance (see Owner’s Manual), particularly

when connecting speakers in parallel.

Connecting an impedance load outside

the amplifier’s rated range can damage the

amplifier.

Protection Circuit

This speaker system has an internal protection

circuit that shuts off the speaker unit when an

excessive input signal is applied. If the speaker

unit emits no sound, reduce the volume level of

the amplifier immediately. The sound will return

automatically in several seconds.

Do not place the speaker face down with the

grille attached, as deformation of the grille may

result.

When placing the speaker face down, always

place it on a flat surface.

Avoid touching or allowing objects to come in

contact with the speaker diaphragms.

Information

About this manual

The illustrations as shown in this manual are for

instructional purposes only.

The company names and product names in

this manual are the trademarks or registered

trademarks of their respective companies.

Regarding disposal

This product contains recyclable components.

When disposing of this product, please contact

the appropriate local authorities.

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

 

NOTICE ...................................................................................... 3

Information ............................................................................... 3

 

 

Main features .......................................................................... 4

Included accessories ........................................................... 5

Optional accessories ........................................................... 5

 

Connect the power amplier and the VXS3S ............. 6

Set the line voltage/impedance and power ................. 6

Connecting satellites ........................................................... 7

 

Speaker orientation .............................................................. 9

Pre-installation (cable preparation) ...............................10





Painting the grille ................................................................16

Painting the speaker enclosure .....................................16

Painting the ceiling mount adaptor ..............................17





Contents Introduction

Thank you for purchasing a YAMAHA VXS3SB or VXS3SW (hereafter

"VXS3S") speaker system. This product is a subwoofer designed

for playing background music in a retail or commercial setting. This

manual explains to the installer how to install the product. Additionally,

the product can be installed in a ceiling using an optional CMA3SB

or CMA3SW (hereafter "CMA3S"). To obtain maximum performance

from your YAMAHA speaker system, we recommend that you read this

Owner’s Manual thoroughly before use. Keep this manual in a safe place

for future reference.

Main features

Uses Yamaha's unique SR-Bass™ technology* to provide realistic sound

and amazing energy in a small speaker.

• Supports both low-impedance and high-impedance connection in a

single speaker.

• Features connection terminals for satellite speakers, allowing you to

keep the number of power amplifier channels used to a minimum.

* SR-Bass™ represents the evolution of passive-type diaphragm technology. It

is Yamaha's unique bass reproduction technology that efficiently converts the

energy inside the speaker cabinet into low-frequency sound.

* The contents of this manual apply to the latest specifications as of the publishing

date. To obtain the latest manual, access the Yamaha website then download the

manual file.

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Introduction

Included accessories

VXS3S

Speaker ×1 Grille ×1

Safety wire ×1 Mounting bracket ×1 Spacer ×3

Machine screw (M4×16) ×2 Masking sheet ×2 Owner's Manual

(this document)

Optional accessories

Ceiling mount adaptor CMA3S

Ceiling mount adaptor ×1 Square ring ×1

Safety wire ×1 Terminal cover ×1 Tapping screw (4×12) ×8

Tapping screw (4×8) ×2 Hole cover sheet ×4 Cutout template ×1

Tile rails ×2 Masking sheet ×1

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Connections

Set the line voltage/impedance and power

Select the line voltage/impedance (100V/70V/8

) and input wattage

power tap when using a 100V/70V line distributed system.

Satellite speakers (NONE)

Satellite speakers (×4)

Satellite speakers (×2)

NOTICE

• When connecting speakers with high impedance, check the tap selector switch

settings indicated around the switch, and then set the tap according to the number of

satellite speaker connections (NONE/×2/×4) and the output (W).

Make sure that the input total of each speaker does not exceed the rated output of the

power ampliﬁer.

• Do not set the tap selector switch to the "X" position.

• When using a low impedance connection, set the tap selector switch to the “8

”

position.

If the setting is incorrect, it may cause malfunction of the speaker and ampliﬁer.

• Make sure the ampliﬁer is switched off before operating the tap selector switch.

Connect the power ampliﬁer and the VXS3S

Connect the OUTPUT of the power amplifier to the INPUT of the

subwoofer.

＋

－

Power amplifier

INPUT

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Connections

Connecting satellites

This product features built-in output terminals for connecting satellite

speakers. You can connect full-range speakers to the satellite terminals

and use them as mid and high-range speakers.

NOTICE

• We recommend the use of 2 or 4 satellite speakers.

• Use caution when mixing 2- and 4-speaker satellite systems, as there may be

differences in volume.



VXS3S+VXS1ML (×4) low impedance connection

This is a basic system.

＋

－

＋

－

＋

－

＋

－

＋

－

Power amplifier

INPUT

ST1 ST2

ST3 ST4



VXS3S+VXS1ML (×2) low impedance connection

Connect the speakers as shown below when using only 2 satellite

speakers.

＋

－

＋

－

＋

－

Power amplifier

INPUT

ST1

ST2

NOTICE

When connecting satellites at low impedance, the combined impedance is 4

(when

connecting 4 satellites) or 3.5

(when connecting 2 satellites).

Make sure than the power ampliﬁer is compatible with these impedances. If the power

ampliﬁer is not compatible, the power ampliﬁer may malfunction.

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Connections



VXS3S+VXS1ML high impedance connection

This is an example of a system where multiple subwoofers are connected using high impedence connections. Additionally, multiple satellite systems can

be connected using just one of the power amplifier's channels.

Set the tap selector switch of the VXS3S according to the number of satellite speaker connections (NONE/×2/×4) and output (W) while referring to the

selector switch inscription. For details, refer to page 6.

＋

－

＋

－

＋

－

＋

－

Power amplifier

Hi-z

INPUT

Hi-z

THRU

INPUT

THRU

ST1 ST2

ST3 ST4

ST1 ST2

ST3 ST4

additional systems

NOTICE

• When connecting speakers with high impedance, be sure that the rated output of the power ampliﬁer exceeds the input total of each speaker.

For details, refer to the explanation of high-impedance connection at the following URL.

Yamaha Pro Audio site, "Better Sound for Commercial Installation"

http://www.yamahaproaudio.com/global/en/training_support/better_sound/

• When installing speakers, make sure the power ampliﬁer is turned off.

• When connecting at high impedance, the signals inputted into the speaker should be sent through a high-pass ﬁlter set to 60Hz or greater.

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Installing on a wall or ceiling

You can use the included mounting bracket to install the speaker on a

wall or ceiling. Before installation, make sure the installation area can

support the weight of the speaker.

NOTICE

When installing speakers, make sure the power ampliﬁer is turned off.

NOTE

If you will paint the speaker, refer to "Painting" on page 16.

Speaker orientation

Install the speaker so that the

mark on the mounting bracket is facing

the

mark on the speaker.

Horizontal installation Vertical installation

mark

CAUTION

When installing the speaker in a vertical orientation, if the

mark on

the mounting bracket is pointing down, the speaker cannot be se-

cured to the mounting bracket and it may fall. Do not install the speak-

er so that the

mark points down.

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Installing on a wall or ceiling

Pre-installation (cable preparation)

Strip the cable insulation as shown in the figure and connect the cables.

Compatible cable: AWG12 (max. 3.5 sq)

7–8mm

NOTE

• Do not use solder to plate stranded wires, as this may cause the wires to break.

• Run the speaker cables to the installation area before installing the speaker.

Attaching the mounting bracket to the wall or ceiling

1-1

Determine the speaker installation location.

1-2

Refer to the ﬁgure below and determine where the mounting

bracket will be installed and where the cables will be fed.

110

3040

Wall or ceiling

175 or more

90 or more 90 or more

Wall or ceiling

Recommended area

for pulling out cables

Unit:mm

1-3

If you want to add space between the wall and the speaker,

attach spacers to the mounting bracket.

When securing at 4 points

When securing at 1 point (center)

1-4

Attach the mounting bracket to the wall or ceiling.

The 4 slots are for M6 screws, and the center hole's diameter is

11 mm.

1-5

Feed the cables from the wall or ceiling.

Attaching the safety wire

2-1

Attach the safety wire to the wall or ceiling.

CAUTION

• Use the included safety wire.

• Attach safety wire high enough so that there is not too much

slack in the wire.

• If the included safety wire is not long enough, consider the

weight of the speaker and the installation conditions, and pro-

cure an appropriate safety wire.

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Installing on a wall or ceiling

2-2

Attach the safety wire to the speaker.

Attach the safety wire so that its clasp ﬁts inside the groove on

the speaker.

Connecting the cables

3-1

Use a Phillips screwdriver to loosen the screws on the barrier

strip, insert the cables, and then tighten the screws. For

information about connecting the cables, refer to "Connections"

on page 6. Make sure the cables are secure and cannot be

pulled out.

Secure the speaker to the mounting bracket

4-1

Remove the grille.

4-2

Attach the speaker so that the

mark on the mounting bracket

is facing the

mark on the speaker.

mark

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Installing on a wall or ceiling

4-3

Slide the speaker about 10mm in the direction shown to tempo-

rarily secure the speaker.

About 10mm

4-4

Use the supplied two screws to secure the speaker.

CAUTION

Make sure you tighten the screws.

NOTICE

When installing the speaker, make sure you do not touch the ﬂaps or subject the

speaker to strong shocks. If the ﬂaps become indented, the sound may become

distorted.

Flaps

Setting the line voltage/impedance and power

5-1

Set the line voltage/impedance (100V/70V/8

) and input wattage

when using a 100V/70V line distributed system. For details, refer

to page 6.

Attach the grille

6-1

Align the grille to the front of the cabinet and attach the grille.

CAUTION

If the grille is not attached properly, it may fall off after the speaker is

installed.

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Installing in a ceiling (using the CMA3S)

You can use the optional VXS3S ceiling mount adaptor to install the

speaker in a ceiling.

Cut a hole in the ceiling

1-1

Use the included cutout template (350mm×210mm) to mark the

outline of the hole on the ceiling.

NOTE

Make sure to use the included cutout template; if the hole size is not correct, you

will not be able to install the speaker.

1-2

Cut along the outline and cut the hole.

When cutting the hole, be careful to prevent debris or dust from

entering your eyes.

Attach the square ring and rails to the inside

surface of the ceiling.

2-1

Insert the two tile rails through the cut hole and place them on the

ceiling surface within your reach. Be sure that each tile rails are

oriented as shown in the illustration.

2-2

Insert the square-ring through the cut hole.

2-3

Secure the square-ring and tile rails with supplied two screws

through either slot of both square-ring brackets.

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Installing in a ceiling (using the CMA3S)

Attach the ceiling mount adaptor to the speaker.

3-1

Remove the grille.

3-2

Insert the speaker into the ceiling mount adaptor, and secure the

speaker using the supplied four screws.

Attach the safety wire

4-1

Refer to Step 2 on page 10.

Use the safety wire included with the CMA3S.

Connecting the cables

5-1

Feed the cables through the hole in the ceiling.

5-2

Run the cables through the terminal cover.

5-3

Use a Phillips screwdriver to loosen the screws on the barrier

strip, insert the cables, and then tighten the screws. For

information about connecting the cables, refer to "Connections"

(page 6). Make sure the cables are secure and cannot be

pulled out.

5-4

Tighten the screws and attach the terminal cover.

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Installing in a ceiling (using the CMA3S)

Secure the speaker to the ceiling

6-1

Push the speaker into the ceiling, taking care not to pinch the cables.

NOTICE

When installing the speaker, make sure you do not touch the ﬂaps or subject the

speaker to strong shocks. If the ﬂaps become indented, the sound may become

distorted.

Flaps

6-2

While lifting the speaker up slightly, use a Phillips screwdriver to

turn the screws clockwise and tighten the attachments screws.

The clamp opens when you begin turning the screw. As you

continue to turn the screw, the clamp slides down and pulls the

speaker into the ceiling.

NOTE

If the clamp is difﬁcult to open, turn the screw counter-clockwise one-half revolu-

tion; this will make it easier to open.

Clamp

Attachment

screw

CAUTION

• To prevent stripping the screws, do not overtighten the screws.

• Do not turn any screws other than the attachment screws. This

may cause the speaker to fall or malfunction.

Setting the line voltage/impedance and power

7-1

Refer to page 6.

Attach the hole cover sheets

8-1

Attach the included hole cover sheets to the screw holes.

Attach the grille

9-1

Align the grille to the front of the cabinet and attach the grille.

CAUTION

If the grille is not attached properly, it may fall off after the speaker

is installed.

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Painting

When painting the VXS3S, we recommend using acrylic lacquer paint.

Refer to the paint's instructions for details on how to apply the paint.

CAUTION

Work in an area that has adequate ventilation.

NOTICE

• Painting procedures often require the use of volatile solvents that can cause ﬁre. Follow

all necessary safety precautions to avoid any risk of a ﬁre or accident.

• Yamaha cannot be held responsible for any damage to the speaker as a result of

painting.

Painting the grille

Remove the grille from the speaker, taking care not to scratch it.

Remove the emblem on the front of the grille.

The emblem is attached by adhesive tape.

Tuck the included masking sheet under the crosspiece on the back

of the grille and insert the masking sheet.

NOTE

Make sure the areas shown below are covered.

Apply the paint to the grille.

NOTE

Make sure the holes in the grille do not become clogged with paint.

If the holes become clogged with paint, sound quality may be affected.

When the paint is completely dry, remove the masking sheet and

attach the emblem to the grille.

Make sure the emblem is attached in the correct position.

Attach the grille to the speaker.

Painting the speaker enclosure

Remove any dust or dirt with a lint-free cloth.

Do not sand the enclosure.

Use spray paint to paint the enclosure.

Cover the bafﬂe and connectors using masking materials to avoid

paint contact.

Allow the paint to dry completely.

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Painting

Painting the ceiling mount adaptor

Wipe off any dirt from the ceiling mount adapter before painting it.

Do not ﬁle it down.

Align the included masking sheet with the posts of the ceiling mount

adaptor and insert the masking sheet.

Use masking tape to cover the posts and the screw heads (8 loca-

tions total).

NOTE

Use masking tape as necessary to mask other areas.

Spray the paint onto the ceiling mount adaptor and the hole cover

sheets.

When the paint is completely dry, remove the masking sheet.

151

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Speciﬁcations

Model VXS3SB VXS3SW

Type SR-Bass™ type Subwoofer

Component 3.5" (9cm) Cone

Nominal impedance

Lo-Z: 8

Hi-Z:

4 Satellites or None

15W 7.5W 3.8W 1.9W

100V 670

1.3k

2.7k

70V 330

670

1.3k

2.7k

2 Satellites

15W 7.5W 3.8W

100V 1.3k

2.7k

70V 670

1.3k

2.7k

Satellite impedance 8

(Load per satellite output recommended)

Power rating

NOISE 20W

PGM 40W

MAX 80W

Sensitivity (1W, 1m)*1 79dB SPL

Maximum SPL

(Calculated,1m)*2

98dB SPL

Frequency range (-10dB) 65Hz - 180Hz

Connector

TERMINAL BLOCKS(4pin) Input:

+/-, Loop-thru: +/-

TERMINAL BLOCKS(8pin) Satellite output:

+/- (ST1~ST4)

Max. wire size AWG 12(3.5sq)

Transformer

Taps

70V line 15W, 7.5W, 3.8W, 1.9W

100V line 15W, 7.5W, 3.8W

Overload protection

Full-range power limiting to protecting

network and transducers

Model VXS3SB VXS3SW

Magnetically shielded No

Enclosure

Cabinet

Material

ABS (V-0) 5mm Black ABS (V-0) 5mm White

Bafﬂe

Material

ABS (V-0) 3.5mm Black

Grille

Material

Powder coated perforated steel (t=0.6mm)

Grille Frame: ABS (V-0)

Finish

Black painting

(approximate value:

Munsell N3)

White painting

(approximate value:

Munsell N9)

Aperture

ratio

55% 55%

Dimension (Speaker only)

W322 × H162 × D118mm

(12 5/8" × 6 3/8" × 4 5/8")

Net Weight (Speaker only) 2.7 kg (6.0 lbs)

Packaging Packaged in 1pc

*1 : Full-space (4

)

*2 : Calculated based on power rating and sensitivity, exclusive of power

compression.

Model CMA3SB CMA3SW

Enclosure

ABS (V-0) 3.0mm

Black

ABS (V-0) 3.0mm

White

Dimensions

(Adapter only)

W386 × D233 × H90mm

(15 1/4" × 9 1/4" × 3 1/2")

Net Weght 0.44 kg (0.97 lbs)

Cutout size 350mm × 210mm (13 3/4" × 8 1/4")

152

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Dimensions

VXS3SB/VXS3SW CMA3SB/CMA3SW (OPTION)

■ ANCHOR BRACKET AND SQUARE RING

■ TILE RAIL

■ SQUARE RING

644

608

118

322

162

277

262

206

346

402

277

262

206

402

346

154

5 55

■ WALL BRACKET

117

φ11

386

233

Unit: mm

153

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

产品中有害物质的名称及含量

部件名称

有害物质

铅

（Pb）

汞

（Hg）

镉

（Cd）

六价铬

（Cr(VI)）

多溴联苯

（PBB）

多溴二苯醚

（PBDE）

外壳、框架 × ○ ○ ○ ○ ○

印刷线路板 × ○ ○ ○ ○ ○

电缆类 × ○ ○ ○ ○ ○

扩音装置 × ○ ○ ○ ○ ○

本表格依据 SJ/T 11364 的规定编制。

○ ：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。

× ：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。

此标识适用于在中华人民共和国销售的电

器电子产品。标识中间的数字为环保使用

期限的年数。

保护环境

如果需要废弃设备时，请与本地相关机构联系，获取正确的废弃方法。

请勿将设备随意丢弃或作为生活垃圾处理。

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that used electrical and

electronic products should not be mixed with general household waste. For proper treatment, recovery and

recycling of old products, please take them to applicable collection points, in accordance with your national

legislation.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment which could otherwise arise from inappropriate waste

handling.

For more information about collection and recycling of old products, please contact your local municipality, your

waste disposal service or the point of sale where you purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further

information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local

authorities or dealer and ask for the correct method of disposal.

(weee_eu_en_02)

Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte

Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten

benutzte elektrische Geräte nicht mit dem normalen Haushaltsabfall entsorgt werden.

In Übereinstimmung mit Ihren nationalen Bestimmungen bringen Sie alte Geräte bitte zur fachgerechten

Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen.

Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle Ressourcen zu schützen, und

verhindern mögliche negative Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls

durch unsachgerechte Müllentsorgung auftreten könnten.

Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte kontaktieren Sie bitte Ihre

örtliche Stadt- oder Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel.

Information für geschäftliche Anwender in der Europäischen Union:

Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren Händler oder Zulieferer für weitere

Informationen.

Entsorgungsinformation für Länder außerhalb der Europäischen Union:

Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausrangieren möchten,

kontaktieren Sie bitte Ihre örtlichen Behörden oder Ihren Händler und fragen Sie nach der sachgerechten

Entsorgungsmethode.

(weee_eu_de_02)

154

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Informations concernant la collecte et le traitement des déchets d’équipements

électriques et électroniques

Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits électriques ou

électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels.

Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et

électroniques, veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation

nationale.

En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à

la sauvegarde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui

pourraient advenir lors d'un traitement inapproprié des déchets.

Pour plus d'informations à propos de la collecte et du recyclage des déchets d’équipements électriques et

électroniques, veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente où

vous avez acheté les produits.

Pour les professionnels dans l'Union européenne :

Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques, veuillez contacter

votre vendeur ou fournisseur pour plus d'informations.

Informations sur la mise au rebut dans d'autres pays en dehors de l'Union européenne :

Ce symbole est seulement valable dans l'Union européenne. Si vous souhaitez vous débarrasser de déchets

d’équipements électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et

demander la méthode de traitement appropriée.

(weee_eu_fr_02)

Información para usuarios sobre la recogida y eliminación de los equipos antiguos

Este símbolo en los productos, embalajes y documentos anexos significa que los productos eléctricos y

electrónicos no deben mezclarse con los desperdicios domésticos normales.

Para el tratamiento, recuperación y reciclaje apropiados de los productos antiguos, llévelos a puntos de reciclaje

correspondientes, de acuerdo con la legislación nacional.

Al deshacerse de estos productos de forma correcta, ayudará a ahorrar recursos valiosos y a impedir los posibles

efectos desfavorables en la salud humana y en el entorno que de otro modo se producirían si se trataran los

desperdicios de modo inapropiado.

Para obtener más información acerca de la recogida y el reciclaje de los productos antiguos, póngase en contacto

con las autoridades locales, con el servicio de eliminación de basuras o con el punto de venta donde adquirió los

artículos.

Para los usuarios empresariales de la Unión Europea:

Si desea desechar equipos eléctricos y electrónicos, póngase en contacto con su vendedor o proveedor para

obtener más información.

Información sobre la eliminación en otros países fuera de la Unión Europea:

Este símbolo solo es válido en la Unión Europea. Si desea desechar estos artículos, póngase en contacto con las

autoridades locales o con el vendedor y pregúnteles el método correcto.

(weee_eu_es_02)

Informazioni per gli utenti sulla raccolta e lo smaltimento di vecchia attrezzatura

Questi simboli sui prodotti, sull'imballaggio e/o sui documenti che li accompagnano, indicano che i prodotti elettrici

ed elettronici non devono essere mischiati con i rifiuti generici.

Per il trattamento, il recupero e il riciclaggio appropriato di vecchi prodotti, si prega di portarli ai punti di raccolta

designati, in accordo con la legislazione locale.

Smaltendo correttamente questi prodotti si potranno recuperare risorse preziose, oltre a prevenire potenziali effetti

negativi sulla salute e l'ambiente che potrebbero sorgere a causa del trattamento improprio dei rifiuti.

Per ulteriori informazioni sulla raccolta e il riciclaggio di vecchi prodotti, si prega di contattare l’amministrazione

comunale locale, il servizio di smaltimento dei rifiuti o il punto vendita dove sono stati acquistati gli articoli.

Per utenti imprenditori dell'Unione europea:

Se si desidera scartare attrezzatura elettrica ed elettronica, si prega di contattare il proprio rivenditore o il proprio

fornitore per ulteriori informazioni.

Informazioni sullo smaltimento negli altri Paesi al di fuori dell'Unione europea:

Questi simboli sono validi solamente nell'Unione Europea; se si desidera scartare questi articoli, si prega di

contattare le autorità locali o il rivenditore e richiedere informazioni sulla corretta modalità di smaltimento.

(weee_eu_it_02)

Informações para os utilizadores relativas à recolha e eliminação de equipamentos

usados

Este símbolo, presente em produtos, embalagens e/ou incluído na documentação associada, indica que os

produtos elétricos e eletrónicos usados não devem ser eliminados juntamente com os resíduos domésticos em

geral.

O procedimento correto consiste no tratamento, recuperação e reciclagem de produtos usados, pelo que deve

proceder à respetiva entrega nos pontos de recolha adequados, em conformidade com a legislação nacional em

vigor.

A eliminação destes produtos de forma adequada permite poupar recursos valiosos e evitar potenciais efeitos

prejudiciais para a saúde pública e para o ambiente, associados ao processamento incorreto dos resíduos.

Para mais informações relativas à recolha e reciclagem de produtos usados, contacte as autoridades locais, o

serviço de eliminação de resíduos ou o ponto de venda onde foram adquiridos os itens relevantes.

Informações para utilizadores empresariais na União Europeia:

Para proceder à eliminação de equipamento elétrico e eletrónico, contacte o seu revendedor ou fornecedor para

obter informações adicionais.

Informações relativas à eliminação em países não pertencentes à União Europeia:

Este símbolo é válido exclusivamente na União Europeia. Caso pretenda eliminar este tipo de itens, contacte as

autoridades locais ou o seu revendedor e informe-se acerca do procedimento correto para proceder à respetiva

eliminação.

(weee_eu_pt_02a)

155

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

Importan

t Notice: Guarantee Information for customers in

European Economic Area (EEA) and Sw

itzerland

Important Notice: Guarantee Information for customers in EEA* and Switzerland

For detailed guarantee information about this Yamaha product, and Pan-EEA* and Switzerland warranty service, please either

visit the website address below (Printable le is available at our website) or contact the Yamaha representative ofce for your

country. * EEA: European Economic Area

Wichtiger Hinweis: Garantie-Information für Kunden in der EWR* und der Schweiz

Für nähere Garantie-Information über dieses Produkt von Yamaha, sowie über den Pan-EWR*- und Schweizer Garantieservice,

besuchen Sie bitte entweder die folgend angegebene Internetadresse (eine druckfähige Version bendet sich auch auf unserer

Webseite), oder wenden Sie sich an den für Ihr Land zuständigen Yamaha-Vertrieb. *EWR: Europäischer Wirtschaftsraum

Remarque importante: informations de garantie pour les clients de l’EEE et la Su-

isse

Pour des informations plus détaillées sur la garantie de ce produit Yamaha et sur le service de garantie applicable dans l’ensemble

de l’EEE ainsi qu’en Suisse, consultez notre site Web à l’adresse ci-dessous (le chier imprimable est disponible sur notre site

Web) ou contactez directement Yamaha dans votre pays de résidence. * EEE : Espace Economique Européen

Belangrijke mededeling: Garantie-informatie voor klanten in de EER* en Zwitser-

land

Voor gedetailleerde garantie-informatie over dit Yamaha-product en de garantieservice in heel de EER* en Zwitserland, gaat u

naar de onderstaande website (u vind een afdrukbaar bestand op onze website) of neemt u contact op met de vertegenwoordig-

ing van Yamaha in uw land. * EER: Europese Economische Ruimte

Aviso importante: información sobre la garantía para los clientes del EEE* y Suiza

Para una información detallada sobre este producto Yamaha y sobre el soporte de garantía en la zona EEE* y Suiza, visite la

dirección web que se incluye más abajo (la version del archivo para imprimir esta disponible en nuestro sitio web) o póngase en

contacto con el representante de Yamaha en su país. * EEE: Espacio Económico Europeo

Avviso importante: informazioni sulla garanzia per i clienti residenti nell’EEA* e in

Svizzera

Per informazioni dettagliate sulla garanzia relativa a questo prodotto Yamaha e l’assistenza in garanzia nei paesi EEA* e in

Svizzera, potete consultare il sito Web all’indirizzo riportato di seguito (è disponibile il le in formato stampabile) oppure contat-

tare l’ufcio di rappresentanza locale della Yamaha. * EEA: Area Economica Europea

Aviso importante: informações sobre as garantias para clientes da AEE* e da

Suíça

Para obter uma informação pormenorizada sobre este produto da Yamaha e sobre o serviço de garantia na AEE* e na Suíça,

visite o site a seguir (o arquivo para impressão está disponível no nosso site) ou entre em contato com o escritório de represen-

tação da Yamaha no seu país. * AEE: Área Econômica Européia

Σημαντική σημείωση: Πληροφορίες εγγύησης για τους πελάτες στον ΕΟΧ* και

Ελβετία

Για λεπτομερείς πληροφορίες εγγύησης σχετικά με το παρόν προϊόν της Yamaha και την κάλυψη εγγύησης σε όλες τις χώρες

του ΕΟΧ και την Ελβετία, επισκεφτείτε την παρακάτω ιστοσελίδα (Εκτυπώσιμη μορφή είναι διαθέσιμη στην ιστοσελίδα μας) ή

απευθυνθείτε στην αντιπροσωπεία της Yamaha στη χώρα σας. * ΕΟΧ: Ευρωπαϊκός Οικονομικός Χώρος

Viktigt: Garantiinformation för kunder i EES-området* och Schweiz

För detaljerad information om denna Yamahaprodukt samt garantiservice i hela EES-området* och Schweiz kan du antingen

besöka nedanstående webbaddress (en utskriftsvänlig l nns på webbplatsen) eller kontakta Yamahas ofciella representant i

ditt land. * EES: Europeiska Ekonomiska Samarbetsområdet

Viktig merknad: Garantiinformasjon for kunder i EØS* og Sveits

Detaljert garantiinformasjon om dette Yamaha-produktet og garantiservice for hele EØS-området* og Sveits kan fås enten ved å

besøke nettadressen nedenfor (utskriftsversjon nnes på våre nettsider) eller kontakte kontakte Yamaha-kontoret i landet der du

bor. *EØS: Det europeiske økonomiske samarbeidsområdet

Vigtig oplysning: Garantioplysninger til kunder i EØO* og Schweiz

De kan nde detaljerede garantioplysninger om dette Yamaha-produkt og den fælles garantiserviceordning for EØO* (og Sch-

weiz) ved at besøge det websted, der er angivet nedenfor (der ndes en l, som kan udskrives, på vores websted), eller ved at

kontakte Yamahas nationale repræsentationskontor i det land, hvor De bor. * EØO: Det Europæiske Økonomiske Område

English

Deutsch

Français

Nederlands

Español

Italiano

Português

Ελληνικά

Svenska

Norsk

Dansk

Tärkeä ilmoitus: Takuutiedot Euroopan talousalueen (ETA)* ja Sveitsin asiakkaille

Tämän Yamaha-tuotteen sekä ETA-alueen ja Sveitsin takuuta koskevat yksityiskohtaiset tiedot saatte alla olevasta nettiosoit-

teesta. (Tulostettava tiedosto saatavissa sivustollamme.) Voitte myös ottaa yhteyttä paikalliseen Yamaha-edustajaan. *ETA:

Euroopan talousalue

Ważne: Warunki gwarancyjne obowiązujące w EOG* i Szwajcarii

Aby dowiedzieć się więcej na temat warunków gwarancyjnych tego produktu rmy Yamaha i serwisu gwarancyjnego w całym

EOG* i Szwajcarii, należy odwiedzić wskazaną poniżej stronę internetową (Plik gotowy do wydruku znajduje się na naszej stronie

internetowej) lub skontaktować się z przedstawicielstwem rmy Yamaha w swoim kraju. * EOG — Europejski Obszar Gospo

darczy

Důležité oznámení: Záruční informace pro zákazníky v EHS* a ve Švýcarsku

Podrobné záruční informace o tomto produktu Yamaha a záručním servisu v celém EHS* a ve Švýcarsku naleznete na níže

uvedené webové adrese (soubor k tisku je dostupný na našich webových stránkách) nebo se můžete obrátit na zastoupení rmy

Yamaha ve své zemi. * EHS: Evropský hospodářský prostor

Fontos gyelmeztetés: Garancia-információk az EGT* területén és Svájcban élő

vásárlók számára

A jelen Yamaha termékre vonatkozó részletes garancia-információk, valamint az EGT*-re és Svájcra kiterjedő garanciális

szolgáltatás tekintetében keresse fel webhelyünket az alábbi címen (a webhelyen nyomtatható fájlt is talál), vagy pedig lépjen

kapcsolatba az országában működő Yamaha képviseleti irodával. * EGT: Európai Gazdasági Térség

Oluline märkus: Garantiiteave Euroopa Majanduspiirkonna (EMP)* ja Šveitsi klien-

tidele

Täpsema teabe saamiseks selle Yamaha toote garantii ning kogu Euroopa Majanduspiirkonna ja Šveitsi garantiiteeninduse

kohta, külastage palun veebisaiti alljärgneval aadressil (meie saidil on saadaval prinditav fail) või pöörduge Teie regiooni Yama-

ha esinduse poole. * EMP: Euroopa Majanduspiirkond

Svarīgs paziņojums: garantijas informācija klientiem EEZ* un Šveicē

Lai saņemtu detalizētu garantijas informāciju par šo Yamaha produktu, kā arī garantijas apkalpošanu EEZ* un Šveicē, lūdzu,

apmeklējiet zemāk norādīto tīmekļa vietnes adresi (tīmekļa vietnē ir pieejams drukājams fails) vai sazinieties ar jūsu valsti ap-

kalpojošo Yamaha pārstāvniecību. * EEZ: Eiropas Ekonomikas zona

Dėmesio: informacija dėl garantijos pirkėjams EEE* ir Šveicarijoje

Jei reikia išsamios informacijos apie šį „Yamaha“ produktą ir jo techninę priežiūrą visoje EEE* ir Šveicarijoje, apsilankykite mūsų

svetainėje toliau nurodytu adresu (svetainėje yra spausdintinas failas) arba kreipkitės į „Yamaha“ atstovybę savo šaliai. *EEE –

Europos ekonominė erdvė

Dôležité upozornenie: Informácie o záruke pre zákazníkov v EHP* a Švajčiarsku

Podrobné informácie o záruke týkajúce sa tohto produktu od spoločnosti Yamaha a garančnom servise v EHP* a Švajčiarsku

nájdete na webovej stránke uvedenej nižšie (na našej webovej stránke je k dispozícii súbor na tlač) alebo sa obráťte na zástup-

cu spoločnosti Yamaha vo svojej krajine. * EHP: Európsky hospodársky priestor

Pomembno obvestilo: Informacije o garanciji za kupce v EGP* in Švici

Za podrobnejše informacije o tem Yamahinem izdelku ter garancijskem servisu v celotnem EGP in Švici, obiščite spletno mesto,

ki je navedeno spodaj (natisljiva datoteka je na voljo na našem spletnem mestu), ali se obrnite na Yamahinega predstavnika v

svoji državi. * EGP: Evropski gospodarski prostor

Важно съобщение: Информация за гаранцията за клиенти в ЕИП* и

Швейцария

За подробна информация за гаранцията за този продукт на Yamaha и гаранционното обслужване в паневропейската

зона на ЕИП* и Швейцария или посетете посочения по-долу уеб сайт (на нашия уеб сайт има файл за печат), или се

свържете с представителния офис на Yamaha във вашата страна. * ЕИП: Европейско икономическо пространство

Noticare importantă: Informaţii despre garanţie pentru clienţii din SEE* şi Elveţia

Pentru informaţii detaliate privind acest produs Yamaha şi serviciul de garanţie Pan-SEE* şi Elveţia, vizitaţi site-ul la adresa de

mai jos (şierul imprimabil este disponibil pe site-ul nostru) sau contactaţi biroul reprezentanţei Yamaha din ţara dumneavoastră.

* SEE: Spaţiul Economic European

URL_4

Suomi

Polski

Česky

Magyar

Eesti keel

Latviešu

Lietuvių kalba

Slovenčina

Slovenščina

Български език

Limba română

http://europe.yamaha.com/warranty/

159

VXS3SB / VXS3SW / CMA3SB / CMA3SW

Owner's Manual

ADDRESS LIST

NORTH AMERICA

CANADA

Yamaha Canada Music Ltd.

135 Milner Avenue, Toronto, Ontario, M1S 3R1, Canada

Tel: +1-416-298-1311

U.S.A.

Yamaha Corporation of America

6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A.

Tel: +1-714-522-9011

CENTRAL & SOUTH AMERICA

MEXICO

Yamaha de México, S.A. de C.V.

Av. Insurgentes Sur 1647 Piso 9, Col. San José Insurgentes, Delegación Benito

Juárez, México, D.F., C.P. 03900, México

Tel: +52-55-5804-0600

BRAZIL

Yamaha Musical do Brasil Ltda.

Rua Fidêncio Ramos, 302 – Cj 52 e 54 – Torre B – Vila

Olímpia – CEP 04551-010 – São Paulo/SP, Brazil

Tel: +55-11-3704-1377

ARGENTINA

Yamaha Music Latin America, S.A., Sucursal Argentina

Olga Cossettini 1553, Piso 4 Norte, Madero Este-C1107CEK, Buenos Aires, Argentina

Tel: +54-11-4119-7000

PANAMA AND OTHER LATIN AMERICAN COUNTRIES/CARIBBEAN

COUNTRIES

Yamaha Music Latin America, S.A.

Edif. Torre Banco General, Piso 7, Urbanización Marbella, Calle 47 y Aquilino de la

Guardia, Ciudad de Panamá, República de Panamá

Tel: +507-269-5311

EUROPE

THE UNITED KINGDOM/IRELAND

Yamaha Music Europe GmbH (UK)

Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, U.K.

Tel: +44-1908-366700

GERMANY

Yamaha Music Europe GmbH

Siemensstrasse 22-34, 25462 Rellingen, Germany

Tel: +49-4101-303-0

SWITZERLAND/LIECHTENSTEIN

Yamaha Music Europe GmbH, Branch Switzerland in Thalwil

Seestrasse 18a, 8800 Thalwil, Switzerland

Tel: +41-44-3878080

AUSTRIA/BULGARIA/CZECH REPUBLIC/HUNGARY/ROMANIA/

SLOVAKIA/SLOVENIA

Yamaha Music Europe GmbH Branch Austria

Schleiergasse 20, 1100 Wien, Austria

Tel: +43-1-60203900

POLAND

Yamaha Music Europe GmbH Sp.z o.o. Oddział w Polsce

ul. Wielicka 52, 02-657 Warszawa, Poland

Tel: +48-22-880-08-88

MALTA

Olimpus Music Ltd.

Valletta Road, Mosta MST9010, Malta

Tel: +356-2133-2093

NETHERLANDS/BELGIUM/LUXEMBOURG

Yamaha Music Europe Branch Benelux

Clarissenhof 5b, 4133 AB Vianen, The Netherlands

Tel: +31-347-358040

FRANCE

Yamaha Music Europe

7 rue Ambroise Croizat, Zone d'activités de Pariest, 77183 Croissy-Beaubourg,

France

Tel: +33-1-6461-4000

ITALY

Yamaha Music Europe GmbH, Branch Italy

Via Tinelli N.67/69 20855 Gerno di Lesmo (MB), Italy

Tel: +39-039-9065-1

SPAIN/PORTUGAL

Yamaha Music Europe GmbH Ibérica, Sucursal en España

Ctra. de la Coruña km. 17,200, 28231 Las Rozas de Madrid, Spain

Tel: +34-91-639-88-88

GREECE

Philippos Nakas S.A. The Music House

19th klm. Leof. Lavriou 190 02 Peania – Attiki, Greece

Tel: +30-210-6686168

SWEDEN/FINLAND/ICELAND

Yamaha Music Europe GmbH Germany lial Scandinavia

JA Wettergrensgata 1, 400 43 Göteborg, Sweden

Tel: +46-31-89-34-00

DENMARK

Yamaha Music Denmark, Fillial of Yamaha Music Europe GmbH, Tyskland

Generatorvej 8C, ST. TH. , 2860 Søborg, Denmark

Tel: +45-44-92-49-00

NORWAY

Yamaha Music Europe GmbH Germany - Norwegian Branch

Grini Næringspark 1, 1332 Østerås, Norway

Tel: +47-6716-7800

CYPRUS

Yamaha Music Europe GmbH

Siemensstrasse 22-34, 25462 Rellingen, Germany

Tel: +49-4101-303-0

RUSSIA

Yamaha Music (Russia) LLC.

Room 37, entrance 7, bld. 7, Kievskaya street, Moscow, 121059, Russia

Tel: +7-495-626-5005

OTHER EUROPEAN COUNTRIES

Yamaha Music Europe GmbH

Siemensstrasse 22-34, 25462 Rellingen, Germany

Tel: +49-4101-3030

AFRICA

Yamaha Music Gulf FZE

JAFZA-16, Ofce 512, P.O.Box 17328, Jebel Ali FZE, Dubai, UAE

Tel: +971-4-801-1500

MIDDLE EAST

TURKEY

Yamaha Music Europe GmbH Merkezi Almanya Türkiye İstanbul Şubesi

Maslak Meydan Sodak, Spring Giz Plaza Bagimsiz Böl. No:3, Sariyer Istanbul,

Turkey

Tel: +90-212-999-8010

OTHER COUNTRIES

Yamaha Music Gulf FZE

JAFZA-16, Ofce 512, P.O.Box 17328, Jebel Ali FZE, Dubai, UAE

Tel: +971-4-801-1500

ASIA

THE PEOPLE’S REPUBLIC OF CHINA

Yamaha Music & Electronics (China) Co.,Ltd.

2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China

Tel: +86-400-051-7700

INDIA

Yamaha Music India Private Limited

P-401, JMD Megapolis, Sector-48, Sohna Road, Gurgaon-122018, Haryana, India

Tel: +91-124-485-3300

INDONESIA

PT. Yamaha Musik Indonesia (Distributor)

Yamaha Music Center Bldg. Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930,

Indonesia

Tel: +62-21-520-2577

KOREA

Yamaha Music Korea Ltd.

8F, Dongsung Bldg. 21, Teheran-ro 87-gil, Gangnam-gu, Seoul, 06169, Korea

Tel: +82-2-3467-3300

MALAYSIA

Yamaha Music (Malaysia) Sdn. Bhd.

No.8, Jalan Perbandaran, Kelana Jaya, 47301 Petaling Jaya, Selangor, Malaysia

Tel: +60-3-78030900

SINGAPORE

Yamaha Music (Asia) Private Limited

Block 202 Hougang Street 21, #02-00, Singapore 530202, Singapore

Tel: +65-6740-9200

TAIWAN

Yamaha Music & Electronics Taiwan Co.,Ltd.

2F., No.1, Yuandong Rd., Banqiao Dist., New Taipei City 22063, Taiwan (R.O.C.)

Tel: +886-2-7741-8888

THAILAND

Siam Music Yamaha Co., Ltd.

3, 4, 15, 16th Fl., Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan,

Bangkok 10330, Thailand

Tel: +66-2215-2622

VIETNAM

Yamaha Music Vietnam Company Limited

15th Floor, Nam A Bank Tower, 201-203 Cach Mang Thang Tam St., Ward 4, Dist.3,

Ho Chi Minh City, Vietnam

Tel: +84-8-3818-1122

OTHER ASIAN COUNTRIES

http://asia.yamaha.com/

OCEANIA

AUSTRALIA

Yamaha Music Australia Pty. Ltd.

Level 1, 80 Market Street, South Melbourne, VIC 3205, Australia

Tel: +61-3-9693-5111

COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN

http://asia.yamaha.com/

PA50

Head Ofce/Manufacturer: Yamaha Corporation 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, Japan

(For European Countries) Importer: Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany

Manual Development Group

Published 06/2017 改版 CRZC-C0

Printed in Indonesia

Yamaha Pro Audio global website

http://www.yamahaproaudio.com/

Yamaha Downloads

http://download.yamaha.com/

ZW72160

雅马哈乐器音响（中国）投资有限公司

上海市静安区新闸路1818号云和大厦2楼

客户服务热线： 4000517700

公司网址： http://www.yamaha.com.cn

制造商：雅马哈株式会社

制造商地址：日本静冈县滨松市中区中泽町10-1

进口商：雅马哈乐器音响（中国）投资有限公司

进口商地址：上海市静安区新闸路1818号云和大厦2楼

原产地：印度尼西亚

Yamaha CMA3SB de handleiding

Merk: Yamaha

Model: CMA3SB

Type: de handleiding

Deze handleiding is ook geschikt voor

Download PDF

rapport

in andere talen

English: Yamaha CMA3SB Owner's manual
italiano: Yamaha CMA3SB Manuale del proprietario
русский: Yamaha CMA3SB Инструкция по применению
français: Yamaha CMA3SB Le manuel du propriétaire
español: Yamaha CMA3SB El manual del propietario
Deutsch: Yamaha CMA3SB Bedienungsanleitung
português: Yamaha CMA3SB Manual do proprietário
dansk: Yamaha CMA3SB Brugervejledning
suomi: Yamaha CMA3SB Omistajan opas
čeština: Yamaha CMA3SB Návod k obsluze
svenska: Yamaha CMA3SB Bruksanvisning
Türkçe: Yamaha CMA3SB El kitabı
polski: Yamaha CMA3SB Instrukcja obsługi
română: Yamaha CMA3SB Manualul proprietarului

Andere documenten

Pioneer HTP-SLH500 de handleiding

Yamaha CMA3SB de handleiding

Deze handleiding is ook geschikt voor

Yamaha CMA3SB de handleiding

in andere talen

Gerelateerde artikelen

Andere documenten