680118 nl en ma 2019
4
7. When you change the power cable, you should select the same model cable and: it is only
allowed to let a professional electrician do this.
8. If you need to (re)connect, repair or maintain the applaince, do not do this by yourself.
This is forbidden. This must always be done by a professional electrician.
9. The thermostat is placed in the front of the product, and it’s used to control the temperature
of the heating elements
10. Turn on the power with the mainswitch and rotate the thermostat clockwise. Then aim the
required temperature value to the required temperature place. At this time, the orange
indicator light is on and the heating tube starts to work. As soon as the temperature rises to
the required temperature, the thermostat will cut off the power source automatically.
At the same time the indicator light is off and the heating tube stops operating. If the
temperature of the stove plate falls down slightly, the thermostat will be powered on automati-
cally and the orange indicator light is shining again. The heating tube continues heating and
the temperature of the stove plate will rise. After having completed this process a number of
times it can guarantee the constant temperature of the stove plates within the specified range.
11. You are able to adjust the temperature to the required degree scale to let the food reach the
ideal cooking temperature.
12. The timer does not control the heating elements.
13. If there are any abnormal phenomenons during usage, you must stop the appliance directly.
After checking you can continue to use it as long as it is safe. Do not repair the appliance
by yourself. This should always been done by a technical professional.
14. The temperature can be adjusted inbetween a range of 25ºC ±5%.
IV. Safety Instructions:
1. The appliance needs at least 12 minutes from pressing the power switch on, to heat the
thermostat up to 300ºC.
2. Before you use the appliance, please make sure it reached it’s correct temperature.
3. Paint a layer of vegetable baking oil over the top of the baking tray. You can use the timer to
improve the quality of your food. When you set the timer on about 2~5 minutes, your grilled
sandwich will be ready to serve. When the timer has finished it’s time, it will make a sound
like ‘Ting’. When the food is ready, the user needs to cut the appliance from the power.
4. Never leave the surroundings of the appliance during operation.
5. Never move the appliance during its operation.
6. Never touch the appliance (besides the control panel) during its operation.
7. The appliance should be used following its design. Only use the baking figures to prepare
your sandwich.
8. Cleaning: This equipment can be washed by a wet towel combined with a professional
detergent, but it cannot be washed in water or cannot be cleaned with water. So, never soak the
appliance into water and do not clean it with water to prevent short circuit and other danger.
9. When disconnecting the device from the power, never pull on the cord, only the plug.
10. Cooling down: After usage (and after turning the switch off), the appliance needs to cool
down for a minimum time of 30 minutes. To prevent any burning injuries or other danger,
do not touch, move or use the appliance during this period of time.
11. After usage, turn off the switch.
12. After usage the electricity needs to be cut from the socket to prevent fire hazard.
Make sure the switch is turned off before you cut the electricity from the socket, this to
prevent short circuit or danger.
13. When you move the product from its place, always pick it up from the lower side of the appliance.
Never pick it up from the upper side (baking tray) to prevent any damage to the appliance.
14. During operation or cooling down: always keep the appliance out of reach of children.
This, mainly to prevent burning injuries.